A3COM-HUAWEI-DOT11-ACMT-MIB
File:
A3COM-HUAWEI-DOT11-ACMT-MIB.mib (34519 bytes)
Imported modules
Imported symbols
Defined Types
H3cDot11ACIFLoadInfoEntry |
|
SEQUENCE |
|
|
|
|
h3cDot11ACIfIndex |
Integer32 |
|
|
h3cDot11ACIfApNum |
Integer32 |
|
|
h3cDot11ACIfStaNum |
Integer32 |
|
|
h3cDot11ACIfName |
OCTET STRING |
|
H3cDot11ACBASIfEntry |
|
SEQUENCE |
|
|
|
|
h3cDot11ACBASIfIndex |
Integer32 |
|
|
h3cDot11ACBASIfDescr |
OCTET STRING |
|
|
h3cDot11ACBASIfType |
IANAifType |
|
H3cDot11CAPWAPTunnelEntry |
|
SEQUENCE |
|
|
|
|
h3cDot11CurrTunnelAPID |
H3cDot11ObjectIDType |
|
|
h3cDot11CtrlTunnelCurrSec |
H3cDot11TunnelSecSchemType |
|
|
h3cDot11CtrlTunnelUpTime |
Integer32 |
|
|
h3cDot11DataTunnelCurrSec |
H3cDot11TunnelSecSchemType |
|
|
h3cDot11DataTunnelUpTime |
Integer32 |
|
|
h3cDot11CtrlTunnelUpTimeTicks |
TimeTicks |
|
Defined Values
h3cDot11ACMT |
1.3.6.1.4.1.43.45.1.10.2.75.1 |
This MIB defines information as per wireless AC and tunnel between
AP and AC.
If NMS intends to get more detailed information for the AP and AC,
it could refer entPhysicalIndex in the Entity MIB to get entity
information.
GLOSSARY
IEEE 802.11
Standard to encourage interoperability among
wireless networking equipment.
Access point (AP)
Transmitter/receiver (transceiver) device
that commonly connects and transports data
between a wireless network and a wired network.
Access control (AC)
To control and manage multi-APs, it will bridge
wireless and wired network.
Radio
The chip set to receive and send wireless signal.
Fat AP
Applied in the home, SOHO and so on, and it could
independently work without help from AC.
Fit AP
Applied in the enterprise environment, it will work
under the control and management from AC.
Control And Provisioning of Wireless Access Points Protocol
The short name of protocol is CAPWAP. AC will control
and manage AP by CAPWAP tunnel protocol defined by IETF.
Also, a data tunnel will be set up between AC and AP.
Basic Service Set
The IEEE 802.11 BSS of an AP comprises of the
stations directly associating with the AP. It will
be identified by BSSID. |
MODULE-IDENTITY |
|
|
|
h3cDot11MaxAPNumPermitted |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.1.2 |
Represents the maximum number of AP connection permitted
for one AC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11MaxStationNumPermitted |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.1.3 |
Represents the maximum number of station connection
permitted for one AC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11APConnectCount |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.1 |
Represents the total number of APs which are connecting to AC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11StationConnectCount |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.2 |
Represents the total number of stations which are accessing the
WLAN service through AC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11ACIFLoadInfoEntry |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3.1 |
Each entry represents AP number information of an interface |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cDot11ACIFLoadInfoEntry |
|
|
h3cDot11ACIfIndex |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3.1.1 |
Represents index of AC interface. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11ACIfApNum |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3.1.2 |
Represents AP number connected to the AC interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11ACIfStaNum |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3.1.3 |
Represents Station number connected to the AC interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11ACIfName |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3.1.4 |
Represents InterfaceName AP number connected to AC interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
h3cDot11MasterAPCount |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.4 |
Represents the total number of AP which have established the
master tunnel with AC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11SlaveAPCount |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.5 |
Represents the total number of AP which have established the
slave tunnel with AC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11ConnectAutoAPCount |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.6 |
Represents the total number of auto AP which are connecting to AC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11AcUploadFrameCnt |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.8 |
Represents the number of frames that AP sends to AC through LWAPP tunnel. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cDot11AcDownloadFrameCnt |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.9 |
Represents the number of frames that AC sends to AP through LWAPP tunnel. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cDot11AcUploadFrameBytes |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.10 |
Represents the bytes of frames that AP sends to AC through LWAPP tunnel. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cDot11AcDownloadFrameBytes |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.11 |
Represents the bytes of frames that AC sends to AP through LWAPP tunnel. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cDot11BackupACRole |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.12 |
This object represents the Identity of the AC
null: Not configured
master: Master AC
slave: Slave AC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
null(1), master(2), slave(3) |
|
h3cDot11BackupACNMSIP |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.13 |
This object represents the manger IP address of the slave ac. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
h3cDot11ACBackupMode |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.14 |
This object represents the ac backup mode. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
null(1), hotBackup(2), coldBackup(3) |
|
h3cDot11ACBackupStatus |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.15 |
This object represents the ac backup status. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), standby(2) |
|
h3cDot11ACSwitchCnt |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.16 |
This object represents the ac switch times. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11StationAssocSum |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.1 |
Represents the total number of station association. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
h3cDot11StationReassocSum |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.3 |
Represents the total number of station reassociation. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
h3cDot11StationAssocRejectedSum |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.4 |
Represents the total number of station association rejected on
account of resource limit. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
h3cDot11StationExDeAuthenSum |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.5 |
Represents the total number of exceptional station deauthentication
(Without sending a deauthentication to AP). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
h3cDot11StationCurAssocSum |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.6 |
Represents the total number of current associated stations. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11ACBASIfEntry |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2.3.1 |
Each entry represents the BAS information of an interface |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cDot11ACBASIfEntry |
|
|
h3cDot11ACBASIfIndex |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2.3.1.1 |
The ifIndex of the BAS interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11ACBASIfDescr |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2.3.1.2 |
A textual string containing information about the BAS interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..255) |
|
h3cDot11ACBASIfType |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2.3.1.3 |
The type of the BAS interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IANAifType |
|
|
h3cDot11ACStaUserAuthReqCnt |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.5.3 |
Represents the total number of user authenticate request with this AC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
h3cDot11ACStaUserAuthSuccCnt |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.5.4 |
Represents the total number of user authenticated successed with this AC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
h3cDot11ACStaUserAuthFailCnt |
1.3.6.1.4.1.43.45.1.10.2.75.1.1.5.5 |
Represents the total number of user authenticated failed with this AC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
h3cDot11CAPWAPTunnelEntry |
1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1 |
Each entry contains information of data tunnel and control
tunnel of AP which is connecting to AC. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cDot11CAPWAPTunnelEntry |
|
|
h3cDot11CurrTunnelAPID |
1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.1 |
To uniquely identify the CAPWAP tunnel set up between the AP
identified by APID and a specific AC. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
H3cDot11ObjectIDType |
|
|
h3cDot11CtrlTunnelUpTime |
1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.3 |
Represents how long for control tunnel up. If the value is zero,
then tunnel is not set up. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11DataTunnelUpTime |
1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.5 |
Represents how long for data tunnel up.
If the value is zero, then tunnel is not set up. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11CtrlTunnelUpTimeTicks |
1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.6 |
Represents how long control tunnel is up.
If the value is zero, then tunnel is not set up. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
h3cDot11ACMtTunnelSetupTrap |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.1 |
This notification is sent by AC when CAPWAP tunnel becomes up.
By this way, NMS will immediately know tunnel up event.
It is unnecessary to identify whether it is control or data
tunnel. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
h3cDot11ACMtTunnelDownTrap |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.2 |
This notification is sent by AC when CAPWAP tunnel becomes down.
By this way, NMS will immediately know tunnel down event.
It is unnecessary to identify whether it is control or data
tunnel. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
h3cDot11ACMtBackupSwtTrap |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.3 |
This trap is sent by AC when AC switches from master to slave
or from slave to master. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
h3cDot11ACLoadBalanceTrap |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.4 |
This trap is sent by AC when load-balance is enabled on AC. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
h3cDot11ACStaFullTrap |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.5 |
This notification will be sent when STA is full on AC. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
h3cDot11ACStatusSwitchTrap |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.6 |
This notification will be sent when AC switchs from standby to active
or from standby to active. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
h3cDot11ACMtTrapTunlDwnInfo |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.1 |
Represents the reason for tunnel down.
The following values are supported:
tunnelTimeout(1), - When AC detects the tunnel is broken,
- it will notify NMS.
keyUpdateFailure(2), - rekey process is failed, tunnel will
- be broken.
apReset(3), - Administrator reset AP.
apCrash(4), - AP reboot for system crash.
apDeleted(5) - Delete AP from AC and trigger
- tunnel down.
apCfgChange(6) - The configuration for AP was changed. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
tunnelTimeout(1), keyUpdateFailure(2), apReset(3), apCrash(4), apDeleted(5), apCfgChange(6) |
|
h3cDot11ACMtTrapTunlUpInfo |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.2 |
Represents the reason for tunnel up.
The following values are supported:
up(1) - The AP joined AC.
|
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1) |
|
h3cDot11ACMtTrapBackupSwitchInfo |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.3 |
Represents status which the AC switches to.
The following values are supported:
masterToSlave - The AC switches from master to slave.
slaveToMaster - The AC switches from slave to master.
|
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
masterToSlave(1), slaveToMaster(2) |
|
h3cDot11ACMtTrapTnlAPName |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.4 |
Represents name of the AP which sets up the tunnel with the AC.
|
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
h3cDot11ACMtTrapTnlAPIPAddr |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.5 |
Represents IP address of the AP which sets up the tunnel with the AC.
|
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
h3cDot11LoadBalanceType |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.6 |
Represents which kind load balance is enabled by AC.
The following values are supported:
traffic mode load-balancing: traffic snapshot is considered.
session mode load-balancing: the number of users associated
with the AP/radio is considered.
|
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
traffic(1), session(2) |
|
h3cDot11ACMtTrapAPIPv6Addr |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.8 |
Represents IPv6 address of the AP which sets up the tunnel with
the AC. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
h3cDot11ACMtTrapTunlDwnCount |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.9 |
Reprsents how many times that the tunnel between AC and AP has down. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11ACMaxStaNum |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.10 |
Represents the max number of STA on AC. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11ACMtTrapTnlAPSysName |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.11 |
Represents system name of the AP which sets up the tunnel with the AC. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
h3cDot11ACStatusSwitchInfo |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.13 |
Represents status which the AC switches to.
The following values are supported:
activeToStandby - The AC switches from active to standby.
standbyToActive - The AC switches from standby to active.
|
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
activeToStandby(1), standbyToActive(2) |
|
h3cDot11SourceACNmsIP |
1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.14 |
Represents the NMS IP address of master AC.
|
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|