A3Com-Llc-r1-MIB
File:
A3Com-Llc-r1-MIB.mib (94608 bytes)
Imported modules
Imported symbols
Defined Types
LlcPortAdminEntry |
|
SEQUENCE |
|
|
|
|
llcPortAdminName |
DisplayString |
|
|
llcPortAdminMaxSaps |
Gauge |
|
|
llcPortAdminMaxCcs |
Gauge |
|
|
llcPortAdminMaxPDUOctets |
Integer32 |
|
|
llcPortAdminMaxUnackedIPDUsSend |
INTEGER |
|
|
llcPortAdminMaxUnackedIPDUsRcv |
INTEGER |
|
|
llcPortAdminMaxRetransmits |
Integer32 |
|
|
llcPortAdminAckTimer |
TimeTicks |
|
|
llcPortAdminPbitTimer |
TimeTicks |
|
|
llcPortAdminRejTimer |
TimeTicks |
|
|
llcPortAdminBusyTimer |
TimeTicks |
|
|
llcPortAdminInactTimer |
TimeTicks |
|
|
llcPortAdminDelayAckCount |
Integer32 |
|
|
llcPortAdminDelayAckTimer |
TimeTicks |
|
|
llcPortAdminNw |
Integer32 |
|
LlcPortOperEntry |
|
SEQUENCE |
|
|
|
|
llcPortOperNumSaps |
Gauge |
|
|
llcPortOperSimRim |
INTEGER |
|
|
llcPortOperLastModifyTime |
TimeTicks |
|
LlcSapAdminEntry |
|
SEQUENCE |
|
|
|
|
llcSapNumber |
INTEGER |
|
LlcSapOperEntry |
|
SEQUENCE |
|
|
|
|
llcSapOperStatus |
INTEGER |
|
|
llcSapOperNumCcs |
Integer32 |
|
|
llcSapOperLlc2Support |
INTEGER |
|
LlcSapStatsEntry |
|
SEQUENCE |
|
|
|
|
llcSapStatsLocalBusies |
Counter |
|
|
llcSapStatsRemoteBusies |
Counter |
|
|
llcSapStatsIFramesIn |
Counter |
|
|
llcSapStatsIFramesOut |
Counter |
|
|
llcSapStatsIOctetsIn |
Counter |
|
|
llcSapStatsIOctetsOut |
Counter |
|
|
llcSapStatsSFramesIn |
Counter |
|
|
llcSapStatsSFramesOut |
Counter |
|
|
llcSapStatsRetransmitsOut |
Counter |
|
|
llcSapStatsREJsIn |
Counter |
|
|
llcSapStatsREJsOut |
Counter |
|
|
llcSapStatsWwCount |
Counter |
|
|
llcSapStatsTESTCommandsIn |
Counter |
|
|
llcSapStatsTESTCommandsOut |
Counter |
|
|
llcSapStatsTESTResponsesIn |
Counter |
|
|
llcSapStatsTESTResponsesOut |
Counter |
|
|
llcSapStatsXIDCommandsIn |
Counter |
|
|
llcSapStatsXIDCommandsOut |
Counter |
|
|
llcSapStatsXIDResponsesIn |
Counter |
|
|
llcSapStatsXIDResponsesOut |
Counter |
|
|
llcSapStatsUIFramesIn |
Counter |
|
|
llcSapStatsUIFramesOut |
Counter |
|
|
llcSapStatsUIOctetsIn |
Counter |
|
|
llcSapStatsUIOctetsOut |
Counter |
|
|
llcSapStatsConnectOk |
Counter |
|
|
llcSapStatsConnectFail |
Counter |
|
|
llcSapStatsDisconnect |
Counter |
|
|
llcSapStatsDisconnectFRMRSend |
Counter |
|
|
llcSapStatsDisconnectFRMRRcv |
Counter |
|
|
llcSapStatsDisconnectTimer |
Counter |
|
|
llcSapStatsReset |
Counter |
|
LlcCcAdminEntry |
|
SEQUENCE |
|
|
|
|
llcCcLSap |
INTEGER |
|
|
llcCcRSap |
INTEGER |
|
|
llcCcLMac |
OCTET STRING |
|
|
llcCcRMac |
OCTET STRING |
|
LlcCcOperEntry |
|
SEQUENCE |
|
|
|
|
llcCcOperState |
INTEGER |
|
|
llcCcOperMaxIPDUOctetsSend |
Integer32 |
|
|
llcCcOperMaxIPDUOctetsRcv |
Integer32 |
|
|
llcCcOperMaxUnackedIPDUsSend |
INTEGER |
|
|
llcCcOperMaxUnackedIPDUsRcv |
INTEGER |
|
|
llcCcOperMaxRetransmits |
Integer32 |
|
|
llcCcOperAckTimer |
TimeTicks |
|
|
llcCcOperPbitTimer |
TimeTicks |
|
|
llcCcOperRejTimer |
TimeTicks |
|
|
llcCcOperBusyTimer |
TimeTicks |
|
|
llcCcOperInactTimer |
TimeTicks |
|
|
llcCcOperDelayAckCount |
Integer32 |
|
|
llcCcOperDelayAckTimer |
TimeTicks |
|
|
llcCcOperNw |
Integer32 |
|
|
llcCcOperWw |
INTEGER |
|
|
llcCcOperCreateTime |
TimeTicks |
|
|
llcCcOperLastModifyTime |
TimeTicks |
|
|
llcCcOperLastFailTime |
TimeTicks |
|
|
llcCcOperLastFailCause |
INTEGER |
|
|
llcCcOperLastFailFRMRInfo |
OCTET STRING |
|
|
llcCcOperLastWwCause |
INTEGER |
|
LlcCcStatsEntry |
|
SEQUENCE |
|
|
|
|
llcCcStatsLocalBusies |
Counter |
|
|
llcCcStatsRemoteBusies |
Counter |
|
|
llcCcStatsIFramesIn |
Counter |
|
|
llcCcStatsIFramesOut |
Counter |
|
|
llcCcStatsIOctetsIn |
Counter |
|
|
llcCcStatsIOctetsOut |
Counter |
|
|
llcCcStatsSFramesIn |
Counter |
|
|
llcCcStatsSFramesOut |
Counter |
|
|
llcCcStatsRetransmitsOut |
Counter |
|
|
llcCcStatsREJsIn |
Counter |
|
|
llcCcStatsREJsOut |
Counter |
|
|
llcCcStatsWwCount |
Counter |
|
CcsLlcTunnelRouterEntry |
|
SEQUENCE |
|
|
|
|
ccsLlcPeerAddress |
IpAddress |
|
|
ccsLlcLocalAddress |
IpAddress |
|
|
ccsLlcTunnelId |
INTEGER |
|
|
ccsLlcRouterEnable |
INTEGER |
|
|
ccsLlcRouterMode |
INTEGER |
|
|
ccsLlcRouterTunnelTransport |
INTEGER |
|
|
ccsLlcRouterTunnelPort |
INTEGER |
|
|
ccsLlcRouterPeerString |
DisplayString |
|
CcsLlcTunnelDefaultDestEntry |
|
SEQUENCE |
|
|
|
|
ccsLlcDestTunnelId |
INTEGER |
|
|
ccsLlcRemoteMacAddress |
MacAddress |
|
|
ccsLlcRemoteSap |
INTEGER |
|
|
ccsLlcRemoteSapLowRange |
INTEGER |
|
|
ccsLlcRemoteSapHighRange |
INTEGER |
|
Defined Values
a3com |
1.3.6.1.4.1.43 |
OBJECT IDENTIFIER |
|
|
|
llc |
1.3.6.1.4.1.43.2.26 |
OBJECT IDENTIFIER |
|
|
|
llcCcGroup |
1.3.6.1.4.1.43.2.26.3 |
OBJECT IDENTIFIER |
|
|
|
llcPortAdminTable |
1.3.6.1.4.1.43.2.26.1.1 |
This table contains objects that can be
changed to manage an LLC port. Changing one
of these parameters may take effect in the
operating port immediately or may wait until
the interface is restarted depending on the
details of the implementation.
The operating values may be different from
these configured values if a configured
parameter was changed after the interface was
started. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
LlcPortAdminEntry |
|
llcPortAdminEntry |
1.3.6.1.4.1.43.2.26.1.1.1 |
A list of configured values for an LLC port. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LlcPortAdminEntry |
|
|
llcPortAdminName |
1.3.6.1.4.1.43.2.26.1.1.1.1 |
An octet string that defines the physical port
to which this interface is assigned. It has
implementation-specific significance. Its value
shall be unique within the administered
system. It must contain only ASCII printable
characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..10) |
|
llcPortAdminMaxSaps |
1.3.6.1.4.1.43.2.26.1.1.1.2 |
This parameter specifies the maximum number of
SAPs that can be defined for this port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
llcPortAdminMaxCcs |
1.3.6.1.4.1.43.2.26.1.1.1.3 |
This parameter specifies the maximum number of
connection components that can be
administratively defined for this port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
llcPortAdminMaxPDUOctets |
1.3.6.1.4.1.43.2.26.1.1.1.4 |
This object denotes the default maximum I PDU
size, in octets, that LLCs on this port may
send to and receive from their remote LLC
partners. This count is referred to as 'N1' in
the IEEE 802.2 specification [5]. This size
includes I-Frames, UI-Frames, XIDs, and TEST
frames.
The I PDU size includes all octets in a frame,
excluding framing characters, the MAC header,
and the LLC header. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
llcPortAdminMaxUnackedIPDUsSend |
1.3.6.1.4.1.43.2.26.1.1.1.5 |
This object denotes the default maximum
consecutive unacknowledged I PDU frames that
LLCs on this port may send to their remote LLC
partners. This count is referred to as 'k' in
the IEEE 802.2 specification [5].
At connection setup, the remote LLC may send,
using an XID frame, the maximum number of
unacknowledged I PDUs which it is prepared to
receive. If so, an implementation may choose to
override the administered maximum number of
unacknowledged PDUs with the dynamically learned
value and should reflect this in the
llcCcOperMaxUnackedIPDUsSend object for the
connection component. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..127 |
|
llcPortAdminMaxUnackedIPDUsRcv |
1.3.6.1.4.1.43.2.26.1.1.1.6 |
This object denotes the default maximum number
of unacknowledged I PDUs that LLCs on this port
can expect to receive from their remote LLC
partners. This count is referred to as 'k' in
the IEEE 802.2 specification [5].
At connection setup, an implementation may
choose to send this value to the remote LLC,
using an XID frame. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..127 |
|
llcPortAdminMaxRetransmits |
1.3.6.1.4.1.43.2.26.1.1.1.7 |
This object denotes the default value for the
maximum number of times which LLCs on this port
shall retry a PDU following the expiration of
the acknowledgement timer, the P-bit timer or
the reject timer. When these retries are
exhausted, the link shall be declared inactive.
This count is referred to as 'N2' in the IEEE
802.2 specification [5]. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
llcPortAdminAckTimer |
1.3.6.1.4.1.43.2.26.1.1.1.8 |
This object denotes the default value for the
time interval during which the LLCs on this port
shall expect to receive either:
1) an acknowledgement to one or more outstanding
I PDUs. or 2) a response PDU to an unnumbered
command PDU.
The expiration of this timer shall cause the
unacknowledged frames to be retransmitted
(up to N2 times).
For Implementations that only use a single
'T1' Value (ref. IBM Token-Ring Network
technical reference Chapter 11). This object
will be used to control/read the value. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcPortAdminPbitTimer |
1.3.6.1.4.1.43.2.26.1.1.1.9 |
This object denotes the default value for the
time interval during which the LLCs on this
port shall expect to receive a PDU with the F
bit set to '1' in response to a Type 2 command
with the P bit set to '1'.
The expiration of this timer shall cause the
command with the poll bit to be retransmitted
(up to N2 times). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcPortAdminRejTimer |
1.3.6.1.4.1.43.2.26.1.1.1.10 |
This object denotes the default value for the
time interval during which the LLCs on this
port shall expect to receive a reply to a REJ
PDU.
The expiration of this timer shall cause the
REJ PDU to be retransmitted (up to N2 times). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcPortAdminBusyTimer |
1.3.6.1.4.1.43.2.26.1.1.1.11 |
This object denotes the default value for the
time interval during which the LLCs on this
port shall expect to receive an indication that
a busy condition at the remote LLC has
cleared.
The expiration of this timer causes the
adjacent connection component to be polled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcPortAdminInactTimer |
1.3.6.1.4.1.43.2.26.1.1.1.12 |
This object denotes the default value for the
time interval during which the LLCs on this
port shall expect to receive any PDU from the
remote LLC. This function is not described in
the IEEE 802.2 specification [5]. It is listed
in the IBM Token-Ring Network Architecture [6]
Reference as the Ti parameter and is widely
implemented.
The expiration of this timer shall cause the
local LLC to send a PDU to the remote LLC with
the P bit set to '1'.
Any value for this object less than or equal to
the acknowledgement timer shall mean that the
timer is not used. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcPortAdminDelayAckCount |
1.3.6.1.4.1.43.2.26.1.1.1.13 |
This object denotes the default value for the
maximum number of consecutive I PDUs which the
LLCs on this port shall receive during the
interval defined by llcCcOperDelayTimer
without sending an immediate acknowledgement.
This must be less than or equal to the value of
llcCcOperMaxUnackIPDUsRcv. This function is not
described in the IEEE 802.2 specification [5].
It is listed in the IBM Token-Ring Network
Architecture Reference [6] as the N3 parameter
and is widely implemented.
A value of one indicates that acknowledgments
will be sent immediately and that the value of
llcPortAdminDelayAckTimer shall be ignored. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
llcPortAdminDelayAckTimer |
1.3.6.1.4.1.43.2.26.1.1.1.14 |
This object denotes the default value for the
time interval during which the LLCs on this
port shall delay acknowledgment of one or more
I PDUs (up to the value of
llcCcOperDelayAckCount). This function is not
described in the IEEE 802.2 specification [5].
It is listed in the IBM Token-Ring Network
Architecture Reference [6] as the T2 parameter
and is widely implemented.
The expiration of this timer shall cause the
local LLC to acknowledge all unacknowledged I
PDUs. A value of 0 means that an
acknowledgement will be sent immediately.
This object is associated with the
llcPortAdminDelayAckCount object and is only
defined if that object has a value greater than
one. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcPortAdminNw |
1.3.6.1.4.1.43.2.26.1.1.1.15 |
This object denotes the default value for the
number of IPDUs that must be acknowledged
before the working window size (Ww) can be
incremented by 1 when the working window is not
equal to the maximum transmit window size (TW).
It controls the gradual incrementing of Ww in
congestion situations.
This function is not described in the IEEE
802.2 specification [5]. However, it is listed
in the IBM Token-Ring Network Architecture
Reference [6] as the Nw parameter and is widely
implemented. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
llcPortOperTable |
1.3.6.1.4.1.43.2.26.1.2 |
This table contains current LLC port
parameters. Many of these objects have
corresponding objects in the llcPortAdminTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
LlcPortOperEntry |
|
llcPortOperEntry |
1.3.6.1.4.1.43.2.26.1.2.1 |
Currently set parameters for a specific LLC port. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LlcPortOperEntry |
|
|
llcPortOperNumSaps |
1.3.6.1.4.1.43.2.26.1.2.1.1 |
This object defines the number of SAPs on this
port that are currently enabled. In other
words, this object is a count of the number of
instances of llcSapOperEntry that have a
llcSapOperStatus value of 'active(2)'. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
llcPortOperSimRim |
1.3.6.1.4.1.43.2.26.1.2.1.2 |
This object reflects support for transmission
and receipt of SIM and RIM control frames for
this port.
SIM and RIM are not defined in the ANSI/IEEE
802.2 specification [5] nor in the IBM Token
Ring Architecture Reference [6]. These
control frames are used for the remote program
load of IBM communications processors. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
no(1), yes(2) |
|
llcPortOperLastModifyTime |
1.3.6.1.4.1.43.2.26.1.2.1.3 |
This object describes the value of sysUpTime
when this port definition was last modified.
If the port has not been modified, then this
value shall be zero. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcSapAdminTable |
1.3.6.1.4.1.43.2.26.2.1 |
This table contains objects that can be
changed to manage a local SAP. Changing one
of these parameters may take effect in the
operating SAP immediately or may wait until the
interface is restarted depending on the details
of the implementation.
The operating values may be different from
these configured values if a configured
parameter was changed after the interface was
started. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
LlcSapAdminEntry |
|
llcSapAdminEntry |
1.3.6.1.4.1.43.2.26.2.1.1 |
A list of configured values for a local SAP. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LlcSapAdminEntry |
|
|
llcSapNumber |
1.3.6.1.4.1.43.2.26.2.1.1.1 |
The address of this local SAP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..254 |
|
llcSapOperTable |
1.3.6.1.4.1.43.2.26.2.2 |
This table contains objects that reflect the
current operational parameters of a local SAP. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
LlcSapOperEntry |
|
llcSapOperEntry |
1.3.6.1.4.1.43.2.26.2.2.1 |
A list of configured values for a local SAP. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LlcSapOperEntry |
|
|
llcSapOperStatus |
1.3.6.1.4.1.43.2.26.2.2.1.1 |
This parameter describes the actual state of
this local SAP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inactive(1), active(2) |
|
llcSapOperNumCcs |
1.3.6.1.4.1.43.2.26.2.2.1.2 |
This object defines the number of connection
components on this SAP that are currently in
one of the 'connected' states. In other words,
this object is a count of the number of
instances of llcCcOperEntry that have a
llcCcOperState value greater than or equal to
'normal(3)'. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
llcSapOperLlc2Support |
1.3.6.1.4.1.43.2.26.2.2.1.3 |
This parameter describes whether or not the
LLC implementation supports LLC2 connection
components. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
no(1), yes(2) |
|
llcSapStatsTable |
1.3.6.1.4.1.43.2.26.2.3 |
This table contains objects that reflect the
current operational statistics of a local SAP. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
LlcSapStatsEntry |
|
llcSapStatsEntry |
1.3.6.1.4.1.43.2.26.2.3.1 |
A list of configured values for a local SAP. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LlcSapStatsEntry |
|
|
llcSapStatsLocalBusies |
1.3.6.1.4.1.43.2.26.2.3.1.1 |
This object reflects the total number of times
that the local connection components on this
SAP have entered a busy state (RNR). This
object is initialized to zero when the SAP is
created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsRemoteBusies |
1.3.6.1.4.1.43.2.26.2.3.1.2 |
This object reflects the total number of
times that the adjacent (i.e. remote) connection
components on this SAP have entered a busy
state (RNR). This object is initialized to
zero when the SAP is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsIFramesIn |
1.3.6.1.4.1.43.2.26.2.3.1.3 |
This object reflects the total number of
I-Frames that have been received by connection
components on this SAP. This object is
initialized to zero when the SAP is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsIFramesOut |
1.3.6.1.4.1.43.2.26.2.3.1.4 |
This object reflects the total number of
I-Frames that have been transmitted by connection
components on this SAP. This object is
initialized to zero when the SAP is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsIOctetsIn |
1.3.6.1.4.1.43.2.26.2.3.1.5 |
This object reflects the total octets received
from adjacent connection components on this
SAP. This object covers the address, control,
and information field of I-Frames only. This
object is initialized to zero when the SAP is
created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsIOctetsOut |
1.3.6.1.4.1.43.2.26.2.3.1.6 |
This object reflects the total octets
transmitted to adjacent connection components
on this SAP. This object covers the address,
control, and information field of I-Frames
only. This object is initialized to zero when
the SAP is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsSFramesIn |
1.3.6.1.4.1.43.2.26.2.3.1.7 |
This object reflects the total number of
S-Frames that have been received by connection
components on this SAP. This object is
initialized to zero when the SAP is created.
Note - the ratio of the number of I-Frames to
S-Frames might serve as a measure of link
efficiency and, for instance, could be used to
tune the acknowledgement timer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsSFramesOut |
1.3.6.1.4.1.43.2.26.2.3.1.8 |
This object reflects the total number of
S-Frames that have been transmitted by connection
components on this SAP. This object is
initialized to zero when the SAP is created.
Note - the ratio of the number of I-Frames to
S-Frames might serve as a measure of link
efficiency and, for instance, could be used to
tune the acknowledgement timer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsRetransmitsOut |
1.3.6.1.4.1.43.2.26.2.3.1.9 |
This object reflects the total number of
I-Frames retransmitted by all local connection
components on this SAP. This object is
initialized to zero when the SAP is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsREJsIn |
1.3.6.1.4.1.43.2.26.2.3.1.10 |
This object reflects the total REJ frames
received from all adjacent LLC connection
components on this SAP since it was created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsREJsOut |
1.3.6.1.4.1.43.2.26.2.3.1.11 |
This object reflects the total REJ frames
transmitted to an adjacent LLC connection
components on this SAP since it was created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsWwCount |
1.3.6.1.4.1.43.2.26.2.3.1.12 |
This object reflects the total number of
times, since this SAP was created, that the
dynamic window algorithm has been invoked to
reduce the value of Ww on any of the connection
components of this SAP. This object is
initialized to zero when the SAP is created.
This function is not described in the IEEE 802.2
specification [5], but is widely implemented. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsTESTCommandsIn |
1.3.6.1.4.1.43.2.26.2.3.1.13 |
This object denotes the number of TEST
commands this SAP has received and is a measure
of the number of stations in the network trying
to connect up.
This object is initialized to zero when the SAP
is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsTESTCommandsOut |
1.3.6.1.4.1.43.2.26.2.3.1.14 |
This object denotes the number of TEST
commands this SAP has sent and is a measure of
the number of other stations we are trying to
connect to.
This object is initialized to zero when the SAP
is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsTESTResponsesIn |
1.3.6.1.4.1.43.2.26.2.3.1.15 |
This object denotes the number of TEST
responses this SAP has received and is a
measure of the number of stations in the
network responding to TEST commands this SAP
has sent.
This object is initialized to zero when the SAP
is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsTESTResponsesOut |
1.3.6.1.4.1.43.2.26.2.3.1.16 |
This object denotes the number of TEST
responses this SAP has sent and is a measure of
the number of other stations trying to connect
to this SAP.
This object is initialized to zero when the SAP
is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsXIDCommandsIn |
1.3.6.1.4.1.43.2.26.2.3.1.17 |
This object denotes the number of XID commands
this SAP has received and is a measure of the
number of stations in the network trying to
connect to this SAP. This object is a count of
all XIDs, including SNA XID, IEEE XID, null
XID, and non-activation XIDs.
This object is initialized to zero when the SAP
is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsXIDCommandsOut |
1.3.6.1.4.1.43.2.26.2.3.1.18 |
This object denotes the number of XID commands
this SAP has sent and is a measure of the
number of other stations this SAP is trying to
connect to. This object is a count of all
XIDs, including SNA XID, IEEE XID, null XID,
and non-activation XIDs.
This object is initialized to zero when the SAP
is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsXIDResponsesIn |
1.3.6.1.4.1.43.2.26.2.3.1.19 |
This object denotes the number of XID
responses this SAP has received and is a
measure of the number of stations in the
network responding to TEST commands this SAP
has sent. This object is a count of all XIDs,
including SNA XID, IEEE XID, null XID, and
non-activation XIDs.
This object is initialized to zero when the SAP
is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsXIDResponsesOut |
1.3.6.1.4.1.43.2.26.2.3.1.20 |
This object denotes the number of XID
responses this SAP has sent and is a measure of
the number of other stations trying to connect
to this SAP. This object is a count of all
XIDs, including SNA XID, IEEE XID, null XID,
and non-activation XIDs.
This object is initialized to zero when the SAP
is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsUIFramesIn |
1.3.6.1.4.1.43.2.26.2.3.1.21 |
This object reflects the total number of
unnumbered information (UI) frames received on
a local SAP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsUIFramesOut |
1.3.6.1.4.1.43.2.26.2.3.1.22 |
This object reflects the total number of
unnumbered information (UI) frames sent on a
local SAP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsUIOctetsIn |
1.3.6.1.4.1.43.2.26.2.3.1.23 |
This object reflects the total octets received
from adjacent connection components on this
SAP. This object covers the address, control,
and information field of UI-Frames only. This
object is initialized to zero when the SAP is
created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsUIOctetsOut |
1.3.6.1.4.1.43.2.26.2.3.1.24 |
This object reflects the total octets
transmitted to adjacent connection components
on this SAP. This object covers the address,
control, and information field of UI-Frames
only. This object is initialized to zero when
the SAP is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsConnectOk |
1.3.6.1.4.1.43.2.26.2.3.1.25 |
This object reflects the total number of
successful connections that have been
established on this SAP since the SAP was
created.
A successful connection is indicated by a
successful SABME/UA exchange. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsConnectFail |
1.3.6.1.4.1.43.2.26.2.3.1.26 |
This object reflects the total number of
unsuccessful connections that have been
attempted on this SAP since the SAP was
created.
An unsuccessful connection attempt is indicated
by a SABME/DM exchange or a SABME/timeout. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsDisconnect |
1.3.6.1.4.1.43.2.26.2.3.1.27 |
This object reflects the total number of
normal disconnections that have been
performed on this SAP since the SAP was
created.
A normal disconnection is indicated by a
successful DISC/UA exchange or merely a DISC
sent or received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsDisconnectFRMRSend |
1.3.6.1.4.1.43.2.26.2.3.1.28 |
This object reflects the total number of
abnormal disconnections (resulting from a FRMR
being sent) that have been performed on this
SAP since the SAP was created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsDisconnectFRMRRcv |
1.3.6.1.4.1.43.2.26.2.3.1.29 |
This object reflects the total number of
abnormal disconnections (resulting from a FRMR
being received) that have been performed on
this SAP since the SAP was created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsDisconnectTimer |
1.3.6.1.4.1.43.2.26.2.3.1.30 |
This object reflects the total number of
abnormal disconnections (resulting from a timer
expiration) that have been performed on this
SAP since the SAP was created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcSapStatsReset |
1.3.6.1.4.1.43.2.26.2.3.1.31 |
This object reflects the total number of
resets that have been performed on this SAP
since the SAP was created.
A reset is ... |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcCcAdminTable |
1.3.6.1.4.1.43.2.26.3.1 |
This table contains objects that can be
changed to manage an LLC connection component.
Changing one of these parameters may take
effect in the operating link immediately or may
wait until the link is restarted depending on
the details of the implementation.
The operating values may be different from
these configured values if changed by XID
negotiation or if a configured parameter was
changed after the link was started. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
LlcCcAdminEntry |
|
llcCcAdminEntry |
1.3.6.1.4.1.43.2.26.3.1.1 |
A list of configured values for an LLC connection
component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LlcCcAdminEntry |
|
|
llcCcLSap |
1.3.6.1.4.1.43.2.26.3.1.1.1 |
This value is the address of the local SAP
for this Connection Component. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..254 |
|
llcCcRSap |
1.3.6.1.4.1.43.2.26.3.1.1.2 |
This value is the address of the remote SAP
for this Connection Component. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..254 |
|
llcCcLMac |
1.3.6.1.4.1.43.2.26.3.1.1.3 |
This value is the local MAC address for this
Connection Component. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(6) |
|
llcCcRMac |
1.3.6.1.4.1.43.2.26.3.1.1.4 |
This value is the remote MAC address for this
Connection Component. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(6) |
|
llcCcOperTable |
1.3.6.1.4.1.43.2.26.3.2 |
This table contains current LLC link
parameters. Many of these objects have
corresponding objects in the
llcCcAdminTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
LlcCcOperEntry |
|
llcCcOperEntry |
1.3.6.1.4.1.43.2.26.3.2.1 |
A list of status and control values for an
LLC connection component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LlcCcOperEntry |
|
|
llcCcOperState |
1.3.6.1.4.1.43.2.26.3.2.1.1 |
This object describes the operational state of
the LLC connection. If the connection
component is disabled, llcCcOperState will be
allowed to transition to aDM(1). If the
connection component is enabled, llcCcOperState
will be allowed to transition to normal(3). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
aDM(1), setup(2), normal(3), busy(4), reject(5), await(6), awaitBusy(7), awaitReject(8), dConn(9), reset(10), error(11), conn(12), resetCheck(13), resetWait(14) |
|
llcCcOperMaxIPDUOctetsSend |
1.3.6.1.4.1.43.2.26.3.2.1.2 |
This object denotes the maximum I PDU size, in
octets, that this LLC SAP may send to its
remote connection component partner. This count
is referred to as 'N1' in the IEEE 802.2
specification [5].
At connection setup, the remote LLC may send,
using an XID frame, the maximum I PDU size
which it is prepared to receive. If so, an
implementation may choose to override the
administered maximum PDU size with the
dynamically learned value and should reflect
that in this object.
The I PDU size includes all octets in a frame,
excluding framing characters, the MAC header
and link header. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
llcCcOperMaxIPDUOctetsRcv |
1.3.6.1.4.1.43.2.26.3.2.1.3 |
This object denotes the maximum I PDU size,in
octets, that this LLC can expect to receive
from its remote LLC partner. This count is
referred to as 'N1' in the IEEE 802.2
specification [5]
The I PDU size includes all octets in a frame
with the exception of the framing characters,
the MAC header and the link header. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
llcCcOperMaxUnackedIPDUsSend |
1.3.6.1.4.1.43.2.26.3.2.1.4 |
This object denotes the maximum consecutive
unacknowledged I PDU frames that this LLC may
send to its remote LLC partner. This count is
referred to as 'k' in the IEEE 802.2
specification [5].
At connection setup, the remote LLC may send,
using an XID frame, the maximum number of
unacknowledged I PDUs which it is prepared to
receive. If so, an implementation may choose to
override the administered maximum number of
unacknowledged PDUs with the dynamically learned
value and should reflect that in this object. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..127 |
|
llcCcOperMaxUnackedIPDUsRcv |
1.3.6.1.4.1.43.2.26.3.2.1.5 |
This object denotes the maximum number of
unacknowledged I PDUs that this LLC can expect
to receive from its remote LLC partner. This
count is referred to as 'k' in the IEEE 802.2
specification [5]. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..127 |
|
llcCcOperMaxRetransmits |
1.3.6.1.4.1.43.2.26.3.2.1.6 |
This object denotes the value for the maximum
number of times that this LLC shall retry PDUs
following the expiration of the acknowledgement
timer, the P-bit timer or the reject timer.
When these retries are exhausted, the link
shall be declared inactive. This count is
referred to as 'N2' in the IEEE 802.2
specification [5]. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
llcCcOperAckTimer |
1.3.6.1.4.1.43.2.26.3.2.1.7 |
This object denotes the value for the time
interval during which this LLC shall expect to
receive either:
1) an acknowledgement to one or more
outstanding I PDUs. or 2) a response PDU to an
unnumbered command PDU.
The expiration of this timer shall cause the
frame unacknowledged frames to be retransmitted
(up to N2 times). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcCcOperPbitTimer |
1.3.6.1.4.1.43.2.26.3.2.1.8 |
This object denotes the value for the time
interval during which this LLC shall expect to
receive a PDU with the F bit set to '1' in
response to a Type 2 command with the P bit set
to '1'.
The expiration of this timer shall cause the
REJ PDU to be retransmitted (up to N2 times). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcCcOperRejTimer |
1.3.6.1.4.1.43.2.26.3.2.1.9 |
This object denotes the value for the time
interval during which this LLC shall expect to
receive a reply to a REJ PDU.
The expiration of this timer shall cause the
REJ PDU to be retransmitted (up to N2 times). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcCcOperBusyTimer |
1.3.6.1.4.1.43.2.26.3.2.1.10 |
This object denotes the value for the time
interval during which this LLC shall expect to
receive an indication that a busy condition at
the remote LLC has cleared. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcCcOperInactTimer |
1.3.6.1.4.1.43.2.26.3.2.1.11 |
This object denotes the value for the time
interval during which this LLC shall expect to
receive any PDU from the remote LLC. This
function is not described in the IEEE 802.2
specification [5] but is widely implemented.
The expiration of this timer shall cause the
local LLC to send a PDU to the remote LLC with
the P bit set to '1'.
Any value for this object less than or equal to
the acknowledgement timer shall mean that the
timer is not used. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcCcOperDelayAckCount |
1.3.6.1.4.1.43.2.26.3.2.1.12 |
This object denotes the value for the maximum
number of consecutive I PDUs which this LLC
shall receive during the interval defined by
llcCcOperDelayTimer without sending an
immediate acknowledgement. This must be less
than or equal to the value of
llcCcOperMaxUnackIPDUsRcv. This function is not
described in the IEEE 802.2 specification [5]
but is widely implemented.
A value of one indicates that acknowledgments
will be sent immediately and that the value of
llcCcOperDelayAckTimer should be ignored. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
llcCcOperDelayAckTimer |
1.3.6.1.4.1.43.2.26.3.2.1.13 |
This object denotes the value for the time
interval during which this LLC shall delay
acknowledgment of one or more I PDUs (up to the
value of llcCcOperDelayAckCount). This function
is not described in the IEEE 802.2
specification [5] but is widely implemented.
The expiration of this timer shall cause the
local LLC to acknowledge all unacknowledged I
PDUs.
This object is associated with the
llcCcOperDelayAckCount object and only has
meaning if that object has a value greater than
one. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcCcOperNw |
1.3.6.1.4.1.43.2.26.3.2.1.14 |
This object denotes the value for the number
of IPDUs that must be acknowledged before the
working window size (Ww) can be incremented by
1 when the working window is not equal to the
maximum transmit window size (TW). It controls
the gradual incrementing of Ww in congestion
situations.
This function is not described in the IEEE
802.2 specification [5], but is widely
implemented. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
llcCcOperWw |
1.3.6.1.4.1.43.2.26.3.2.1.15 |
Maximum number of sequentially numbered IPDUs
that the connection component may have
outstanding (unacknowledged) at any given time.
Ww is initialized to the value of
llcCcOperMaxUnackedIPDUsSend when the link is
established. When the dynamic window algorithm
is invoked, Ww varies from 1 up to
llcCcOperMaxUnackedIPDUsSend.
Each time the llcCcOperWw value is decreased,
the reason is recorded in llcCcOperLastWwCause,
and llcCcStatWwCount is incremented by 1.
This function is not described in the IEEE
802.2 specification [5], but is widely
implemented. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..127 |
|
llcCcOperCreateTime |
1.3.6.1.4.1.43.2.26.3.2.1.16 |
This object describes the value of sysUpTime
when this row was created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcCcOperLastModifyTime |
1.3.6.1.4.1.43.2.26.3.2.1.17 |
For administered connection components, this
object describes the value of sysUpTime the
last time this row was modified. If the row
has not been modified, then this value shall be
zero.
For dynamic connection components, this object
identifies the time this connection component
was created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcCcOperLastFailTime |
1.3.6.1.4.1.43.2.26.3.2.1.18 |
This object describes the value of sysUpTime
the last time this connection component
failed. Connection component failure is
defined as a transition to an llcCcOperState
value of aDM(1). If the connection component
has not failed, then this value shall be zero. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
llcCcOperLastFailCause |
1.3.6.1.4.1.43.2.26.3.2.1.19 |
This enumerated object reflects the cause of
the last failure of this LLC connection
component. If the connection component has not
failed, then this object will have a value of
undefined(1). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
undefined(1), rxFRMR(2), txFRMR(3), discReceived(4), discSent(5), retriesExpired(6), forcedShutdown(7) |
|
llcCcOperLastFailFRMRInfo |
1.3.6.1.4.1.43.2.26.3.2.1.20 |
This object reflects the information field of
the FRMR frame if the last failure for this LLC
connection component was a result of an
invalid frame. Otherwise, this field has no
meaning. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(5) |
|
llcCcOperLastWwCause |
1.3.6.1.4.1.43.2.26.3.2.1.21 |
This object indicates the reason that the llcCcOperWw
was reduced the last time this occurred. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
neverInvoked(1), lostData(2), macLayerCongestion(3), other(4) |
|
llcCcStatsTable |
1.3.6.1.4.1.43.2.26.3.3 |
Each entry in this table contains statistics
for a specific LLC connection component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
LlcCcStatsEntry |
|
llcCcStatsEntry |
1.3.6.1.4.1.43.2.26.3.3.1 |
A list of statistics for an LLC connection
component. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LlcCcStatsEntry |
|
|
llcCcStatsLocalBusies |
1.3.6.1.4.1.43.2.26.3.3.1.1 |
This object reflects the total number of times
that the local connection component has entered
a busy state (RNR). This object is initialized
to zero when the connection component is
created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcCcStatsRemoteBusies |
1.3.6.1.4.1.43.2.26.3.3.1.2 |
This object reflects the total number of times
that the adjacent (i.e. remote) connection
component has entered a busy state (RNR). This
object is initialized to zero when the
connection component is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcCcStatsIFramesIn |
1.3.6.1.4.1.43.2.26.3.3.1.3 |
This object reflects the total number of
I-Frames that have been received by the
connection component. This object is
initialized to zero when the connection
component is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcCcStatsIFramesOut |
1.3.6.1.4.1.43.2.26.3.3.1.4 |
This object reflects the total number of
I-Frames that have been transmitted by this
connection component. This object is
initialized to zero when the connection
component is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcCcStatsIOctetsIn |
1.3.6.1.4.1.43.2.26.3.3.1.5 |
This object reflects the total octets received
from the adjacent connection component. This
object covers the address, control, and
information field of I-Frames only. This
object is initialized to zero when the
connection component is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcCcStatsIOctetsOut |
1.3.6.1.4.1.43.2.26.3.3.1.6 |
This object reflects the total octets
transmitted to the adjacent connection
component. This object covers the address,
control, and information field of I-Frames
only. This object is initialized to zero when
the connection component is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcCcStatsSFramesIn |
1.3.6.1.4.1.43.2.26.3.3.1.7 |
This object reflects the total number of
S-Frames that have been received by this
connection component. This object is
initialized to zero when the connection
component is created.
Note - the ratio of the number of I-Frames to
S-Frames might serve as a measure of link
efficiency and, for instance, could be used to
tune the acknowledgement timer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcCcStatsSFramesOut |
1.3.6.1.4.1.43.2.26.3.3.1.8 |
This object reflects the total number of
S-Frames that have been transmitted by this
connection component. This object is
initialized to zero when the connection
component is created.
Note - the ratio of the number of I-Frames to
S-Frames might serve as a measure of link
efficiency and, for instance, could be used to
tune the acknowledgement timer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcCcStatsRetransmitsOut |
1.3.6.1.4.1.43.2.26.3.3.1.9 |
This object reflects the total number of
I-Frames retransmitted by the local connection
component. This object is initialized to zero
when the connection component is created. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcCcStatsREJsIn |
1.3.6.1.4.1.43.2.26.3.3.1.10 |
This object reflects the total REJ frames
received from an adjacent LLC connection
component since connection component startup. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcCcStatsREJsOut |
1.3.6.1.4.1.43.2.26.3.3.1.11 |
This object reflects the total REJ frames
transmitted to an adjacent LLC connection
component since connection component startup. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
llcCcStatsWwCount |
1.3.6.1.4.1.43.2.26.3.3.1.12 |
This object reflects the total number of times, since
connection component startup, that the dynamic window
algorithm has been invoked to reduce the value of Ww.
At connection component startup, this object must be
initialized to zero.
This function is not described in the IEEE 802.2
specification [5], but is widely implemented. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
ccsLlcTunnelVirtualRing |
1.3.6.1.4.1.43.2.26.4.1.1 |
This defines the number of the virtual
token ring used by Logical Link Control.
Changing this parameter may take effect for the
tunnel immediately or may wait until the tunnel
is restarted depending on the details of the
implementation. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..4095 |
|
ccsLlcTunnelMode |
1.3.6.1.4.1.43.2.26.4.1.2 |
This allows one to enable tunneling on the box and
describe the mode of operation i.e. Secure or NonSecure.
Secure mode means that this box will only accept connection
from partners listed in the tunnel peer list. In the non-
Secure mode any incoming IP address is accepted.
This parameter may combine one of qTunnelEnable and
qTunnelDisable (Enable/Disable set) with one of
qTunnelSecure and qTunnelNonSecure (Secure/Nonsecure set);
e.g. qTunnelEnable and qTunnelSecure is a legal
combination. If a member of one set is not supplied on a
'write' operation, the value for that set remains unchanged.
Changing this parameter may take effect for the tunnel
immediately or may wait until the tunnel is restarted
depending on the details of the implementation. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
qTunnelEnable(4), qTunnelDisable(8), qTunnelSecure(16), qTunnelEnableSecure(20), qTunnelDisableSecure(24), qTunnelNonSecure(32), qTunnelEnableNonSecure(36), qTunnelDisableNonSecure(40) |
|
ccsLlcTunnelSNAPriority |
1.3.6.1.4.1.43.2.26.4.1.3 |
This determines the priority of the tunnel traffic
on the Logical Link Control link.
Changing this parameter may take effect for the tunnel
immediately or may wait until the tunnel is restarted
depending on the details of the implementation. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
qPrioDefault(1), qPrioHigh(2), qPrioMedium(3), qPrioLow(4) |
|
ccsLlcTunnelRouterTable |
1.3.6.1.4.1.43.2.26.4.2 |
A table of information regarding all routers
participating in Logical Link Control 2.
Changing one of these parameters may take effect for
the tunnel immediately or may wait until the tunnel
is restarted depending on the details of the
implementation. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
CcsLlcTunnelRouterEntry |
|
ccsLlcTunnelRouterEntry |
1.3.6.1.4.1.43.2.26.4.2.1 |
Information for a single participating router. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CcsLlcTunnelRouterEntry |
|
|
ccsLlcPeerAddress |
1.3.6.1.4.1.43.2.26.4.2.1.1 |
The IP address of the Logical Link Control node's peer.
The peer is at the remote end of the tunnel. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
ccsLlcLocalAddress |
1.3.6.1.4.1.43.2.26.4.2.1.2 |
The IP address of the Logical Link Control node
at the local end of the tunnel. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
ccsLlcTunnelId |
1.3.6.1.4.1.43.2.26.4.2.1.3 |
The tunnel index. This is a unique identifier
for the tunnel. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..63 |
|
ccsLlcRouterEnable |
1.3.6.1.4.1.43.2.26.4.2.1.4 |
Allows tunnel peer to be enabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
qTunEnable(1), qtunDisable(2) |
|
ccsLlcRouterMode |
1.3.6.1.4.1.43.2.26.4.2.1.5 |
Mode of the peer. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
qTransparent(1), qSpecificTerm(2), qLocalTerm(3) |
|
ccsLlcRouterTunnelTransport |
1.3.6.1.4.1.43.2.26.4.2.1.6 |
Type of transport protocol used for tunnelling. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
qTcp(2) |
|
ccsLlcRouterTunnelPort |
1.3.6.1.4.1.43.2.26.4.2.1.7 |
Port number if TCP is used for tunnelling. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..32767 |
|
ccsLlcTunnelDefaultDestTable |
1.3.6.1.4.1.43.2.26.4.3 |
Table of default routes for frames that arrive at this
router. The route on which a particular frame is sent is
determined from the frames's destination MAC address.
Changing one of these parameters may take effect for the
tunnel immediately or may wait until the tunnel is
restarted depending on the details of the implementation. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
CcsLlcTunnelDefaultDestEntry |
|
ccsLlcTunnelDefaultDestEntry |
1.3.6.1.4.1.43.2.26.4.3.1 |
Mapping of a MAC address to a destination router. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CcsLlcTunnelDefaultDestEntry |
|
|
ccsLlcDestTunnelId |
1.3.6.1.4.1.43.2.26.4.3.1.1 |
The destination's llcTunnelId for it's associated
ccsLlcTunnelRouterTable entry. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..63 |
|
ccsLlcRemoteMacAddress |
1.3.6.1.4.1.43.2.26.4.3.1.2 |
The MAC address used for reaching the remote router. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
ccsLlcRemoteSap |
1.3.6.1.4.1.43.2.26.4.3.1.3 |
The current Service Access Port used for reaching the
destination address. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
ccsLlcRemoteSapLowRange |
1.3.6.1.4.1.43.2.26.4.3.1.4 |
The lowest Service Access Port that can be used to
reach the destination address. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
ccsLlcRemoteSapHighRange |
1.3.6.1.4.1.43.2.26.4.3.1.5 |
The highest Service Access Port that can be used to
reach the destination address. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|