ACC-RADIUS

File: ACC-RADIUS.mib (29105 bytes)

Imported modules

RFC1155-SMI RFC-1215 ACC-SYSTEM
ACC-MIB

Imported symbols

OBJECT-TYPE IpAddress TimeTicks
Gauge Counter TRAP-TYPE
accTrapLogSeqNum accBRG DisplayString
RowStatus IfIndex SmdsAddress

Defined Types

AccRadiusAuthServEntry  
SEQUENCE    
  accRadiusAuthServIndex INTEGER
  accRadiusAuthServAdState INTEGER
  accRadiusAuthServAddr IpAddress
  accRadiusAuthServPassword OCTET STRING
  accRadiusAuthServRetryInt TimeTicks
  accRadiusAuthServRetryCnts INTEGER
  accRadiusAuthServUDPPort INTEGER
  accRadiusAuthServOpState INTEGER
  accRadiusAuthServReqCnts Counter
  accRadiusAuthServAccCnts Counter
  accRadiusAuthServRejCnts Counter
  accRadiusAuthServAccessPart DisplayString
  accRadiusAuthServSecure INTEGER

AccRadiusAuthDebugEntry  
SEQUENCE    
  accRadiusAuthDebugName OCTET STRING
  accRadiusAuthDebugMask INTEGER

AccRadiusAcctServEntry  
SEQUENCE    
  accRadiusAcctServIndex INTEGER
  accRadiusAcctServAdState INTEGER
  accRadiusAcctServAddr IpAddress
  accRadiusAcctServPassword OCTET STRING
  accRadiusAcctServRetryInt TimeTicks
  accRadiusAcctServRetryCnts INTEGER
  accRadiusAcctServUDPPort INTEGER
  accRadiusAcctServOpState INTEGER
  accRadiusAcctServReqCnts Counter
  accRadiusAcctServAccCnts Counter
  accRadiusAcctServAccessPart DisplayString
  accRadiusAcctServIBCAttrSupp INTEGER

Defined Values

accRadius 1.3.6.1.4.1.5.1.1.44
OBJECT IDENTIFIER    

accRadiusNASIdentifier 1.3.6.1.4.1.5.1.1.44.1
The string used to identify the NAS to a Radius server
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

accRadiusInvAttribAction 1.3.6.1.4.1.5.1.1.44.2
Invalid Attribute Action
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..90  

accRadiusMaxPort 1.3.6.1.4.1.5.1.1.44.3
The maximum number of simultaneous calls that can be authenticated using the Radius protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..90  

accRadiusPortRangeStart 1.3.6.1.4.1.5.1.1.44.4
The ifIndex for the start of the Radius port range.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accRadiusPortRangeEnd 1.3.6.1.4.1.5.1.1.44.5
The ifIndex for the end of the Radius port range.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accRadiusNASIpAddress 1.3.6.1.4.1.5.1.1.44.11
The IP address used to identify the NAS to a Radius server
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

accRadiusAuth 1.3.6.1.4.1.5.1.1.44.6
OBJECT IDENTIFIER    

accRadiusAuthServTable 1.3.6.1.4.1.5.1.1.44.6.1
Table of Radius authentication Server Information
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccRadiusAuthServEntry

accRadiusAuthServEntry 1.3.6.1.4.1.5.1.1.44.6.1.1
A single Radius authentication server configuration and status
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccRadiusAuthServEntry  

accRadiusAuthServIndex 1.3.6.1.4.1.5.1.1.44.6.1.1.1
The index of this entry in the server table
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..8  

accRadiusAuthServAdState 1.3.6.1.4.1.5.1.1.44.6.1.1.2
The administrative state of the server entry. Enables (and creates if not present), disables or deletes a server entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), deleted(3)  

accRadiusAuthServAddr 1.3.6.1.4.1.5.1.1.44.6.1.1.3
The IP address of the authentication server
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

accRadiusAuthServPassword 1.3.6.1.4.1.5.1.1.44.6.1.1.4
The secret shared between the NAS and the authentication server
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

accRadiusAuthServRetryInt 1.3.6.1.4.1.5.1.1.44.6.1.1.5
The time in seconds to wait for a reply for an access-request from sent to the authentication server
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

accRadiusAuthServRetryCnts 1.3.6.1.4.1.5.1.1.44.6.1.1.6
The number of times to attempt to send an access-request to a server
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

accRadiusAuthServUDPPort 1.3.6.1.4.1.5.1.1.44.6.1.1.7
The destination UDP port number on the server to send an access-request to
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

accRadiusAuthServOpState 1.3.6.1.4.1.5.1.1.44.6.1.1.8
The operational state of a server entry. UP for a server that has responded to the last request sent to it. DOWN for a server that did not respond to the last request sent to it. UNKNOWN for a server that we have not recently sent a request to. DISABLED for a server entry whose admin state is DISABLED
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(3), disabled(4)  

accRadiusAuthServReqCnts 1.3.6.1.4.1.5.1.1.44.6.1.1.9
The number of access-requests that have been sent to a server
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accRadiusAuthServAccCnts 1.3.6.1.4.1.5.1.1.44.6.1.1.10
The number of access accepts that have been received from a server
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accRadiusAuthServRejCnts 1.3.6.1.4.1.5.1.1.44.6.1.1.11
The number of access rejects that have ben received from a server
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accRadiusAuthServAccessPart 1.3.6.1.4.1.5.1.1.44.6.1.1.12
The access partition associated with this authentication server. If an access partition name has been configured, this authentication server will only by used to process requests associated with the indicated access partition. This object may also be used to configure the name of a proxy server.
Status: obsolete Access: read-write
OBJECT-TYPE    
  DisplayString  

accRadiusAuthServSecure 1.3.6.1.4.1.5.1.1.44.6.1.1.13
Certain attributes are considered secure as the values set may comprimise access partitions. A server must have this object set to secure to support sending these secure attributes to the NAS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER secure(1), unsecure(2)  

accRadiusAuthMsgLvl 1.3.6.1.4.1.5.1.1.44.6.2
The diagnostic message level for Radius authentication.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..7  

accRadiusAuthRecoverTO 1.3.6.1.4.1.5.1.1.44.6.3
The time a server entry will remain in the DOWN state before transitioning to UNKNOWN
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

accRadiusAuthReqDiscs 1.3.6.1.4.1.5.1.1.44.6.4
the number of authentication server requests discarded
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

accRadiusAuthRespDiscs 1.3.6.1.4.1.5.1.1.44.6.5
the number of authentication server responses discarded
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

accRadiusAuthLastUser 1.3.6.1.4.1.5.1.1.44.6.6
The user name of the last caller we performed Radius authentication for
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

accRadiusAuthLastType 1.3.6.1.4.1.5.1.1.44.6.7
The type of the last Radius authentication frame received/transmitted
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER access-request(1), access-accept(2), access-reject(3)  

accRadiusAuthCallsRejs 1.3.6.1.4.1.5.1.1.44.6.8
The number of calls rejected due to no replies being received from configured servers
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

accRadiusAuthConfigErrs 1.3.6.1.4.1.5.1.1.44.6.9
the number of dynamic configuration errors
Status: mandatory Access: read-write
OBJECT-TYPE    
  Counter  

accRadiusAuthDebugTable 1.3.6.1.4.1.5.1.1.44.6.10
Table of Radius User Debug Sessions
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccRadiusAuthDebugEntry

accRadiusAuthDebugEntry 1.3.6.1.4.1.5.1.1.44.6.10.1
A single Radius authentication user debug session
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccRadiusAuthDebugEntry  

accRadiusAuthDebugName 1.3.6.1.4.1.5.1.1.44.6.10.1.1
The name of the user to run a debug session for
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

accRadiusAuthDebugMask 1.3.6.1.4.1.5.1.1.44.6.10.1.2
The debug mask to use for the users debug session
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accRadiusAcct 1.3.6.1.4.1.5.1.1.44.7
OBJECT IDENTIFIER    

accRadiusAcctServTable 1.3.6.1.4.1.5.1.1.44.7.1
Table of Radius accounting Server Information
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccRadiusAcctServEntry

accRadiusAcctServEntry 1.3.6.1.4.1.5.1.1.44.7.1.1
A single Radius accounting server configuration and status
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccRadiusAcctServEntry  

accRadiusAcctServIndex 1.3.6.1.4.1.5.1.1.44.7.1.1.1
The index of this entry in the server table
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..8  

accRadiusAcctServAdState 1.3.6.1.4.1.5.1.1.44.7.1.1.2
The administrative state of the server entry. Enables (and creates if not present), disables or deletes a server entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), deleted(3)  

accRadiusAcctServAddr 1.3.6.1.4.1.5.1.1.44.7.1.1.3
The IP address of the accounting server
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

accRadiusAcctServPassword 1.3.6.1.4.1.5.1.1.44.7.1.1.4
The secret shared between the NAS and the accounting server
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

accRadiusAcctServRetryInt 1.3.6.1.4.1.5.1.1.44.7.1.1.5
The time in seconds to wait for a reply for an accounting-request from sent to the accounting server
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

accRadiusAcctServRetryCnts 1.3.6.1.4.1.5.1.1.44.7.1.1.6
The number of times to attempt to send an accounting-request to a server
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

accRadiusAcctServUDPPort 1.3.6.1.4.1.5.1.1.44.7.1.1.7
The destination UDP port number on the server to send an accounting-request to
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

accRadiusAcctServOpState 1.3.6.1.4.1.5.1.1.44.7.1.1.8
The operational state of a server entry. UP for a server that has responded to the last request sent to it. DOWN for a server that did not respond to the last request sent to it. UNKNOWN for a server that we have not recently sent a request to. DISABLED for a server entry whose admin state is DISABLED
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(3), disabled(4)  

accRadiusAcctServReqCnts 1.3.6.1.4.1.5.1.1.44.7.1.1.9
The number of accounting-requests that have been sent to a server
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accRadiusAcctServAccCnts 1.3.6.1.4.1.5.1.1.44.7.1.1.10
The number of accounting responses that have been received from a server
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accRadiusAcctServAccessPart 1.3.6.1.4.1.5.1.1.44.7.1.1.11
The access partition associated with this authentication server. If an access partition name has been configured, this authentication server will only by used to process requests associated with the indicated access partition. This object may also be used to configure the name of a proxy server.
Status: obsolete Access: read-write
OBJECT-TYPE    
  DisplayString  

accRadiusAcctServIBCAttrSupp 1.3.6.1.4.1.5.1.1.44.7.1.1.13
Validity of the Internet Billing support feature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

accRadiusAcctMsgLvl 1.3.6.1.4.1.5.1.1.44.7.2
The diagnostic message level for Radius accounting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..7  

accRadiusAcctRecoverTO 1.3.6.1.4.1.5.1.1.44.7.3
The time a server entry will remain in the DOWN state before transitioning to UNKNOWN
Status: mandatory Access: read-write
OBJECT-TYPE    
  TimeTicks  

accRadiusAcctReqDiscs 1.3.6.1.4.1.5.1.1.44.7.4
The number of accounting requests discarded due to no responses being received from configured servers
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accRadiusAcctRespDiscs 1.3.6.1.4.1.5.1.1.44.7.5
The number of accounting responses discarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

accRadiusAcctLastUser 1.3.6.1.4.1.5.1.1.44.7.6
The user name of the last caller we performed Radius accounting for
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

accRadiusAcctLastType 1.3.6.1.4.1.5.1.1.44.7.7
The type of the last Radius accounting frame received/transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER acct-request(1), acct-response(2)  

accRadiusDebugMask 1.3.6.1.4.1.5.1.1.44.8
Mask for turning on debugging messages
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accRadiusGroupRangeStart 1.3.6.1.4.1.5.1.1.44.9
Group range start
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accRadiusGroupRangeEnd 1.3.6.1.4.1.5.1.1.44.10
Group range end
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accRadiusTraps 1.3.6.1.4.1.5.1.1.44.12
OBJECT IDENTIFIER    

accRadiusTrapMsg 1.3.6.1.4.1.5.1.1.44.12.1
RADIUS trap message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

accRadiusServerDnTrap 1
When the operation state of the server goes down this trap is generated. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 46
TRAP-TYPE    

accRadiusUsrNameTrap 2
If the user name length too high which is not supported by the RADIUS server then this trap is generated. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 4
TRAP-TYPE    

accRadiusInOpportuneEvntTrap 3
Indicates that the event is not found in the list of events supported. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 46
TRAP-TYPE    

accRadiusEvntCfgAddNakTrap 4
Configuration of entity failed () SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 7
TRAP-TYPE    

accRadiusEvntMutexAttribTrap 5
Indicates that both the framed attributes and tunnel attributes are present. It means RADIUS need to configure both framed PPP session and tunnel session which is not possible. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 7
TRAP-TYPE    

accRadiusEvntReqTrap 6
This trap indicates that there is a mismatch between the PPP attributes and one in requested type. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 7
TRAP-TYPE    

accRadiusEvntSPTrap 7
This trap indicates that there is a incompatibility between the Framed PPP service and the service profile. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 7
TRAP-TYPE    

accRadiusEvntCfgTrap 8
Proxy mode tunneling not enabled SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 7
TRAP-TYPE    

accRadiusEvntAttribTrap 9
Indicates that the kind of session is not valid. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 7
TRAP-TYPE    

accRadiusRedundantReqTrap 10
Indicates that the request is duplicate open-request; and the session is already open. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 5
TRAP-TYPE    

accRadiusBindApTrap 11
Indicates that cant bind to access partition which has been configured from the service profile of the user. The service type is no longer checked and any service profile with a configured access partition will cause RADIUS to bind to the access partition; the trap indicates that it may not be a physical port. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 56
TRAP-TYPE    

accRadiusAllocUsrSessionBlkTrap 12
cannot allocate user session block due to memory shortage. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 32
TRAP-TYPE    

accRadiusPktUnknwnServTrap 13
Packet from unknown server - Addr %s, Port %d SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 5
TRAP-TYPE    

accRadiusUDPBindFaildTrap 14
UDP bind failed on port %u SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 46
TRAP-TYPE    

accRadiusAccPartnBindTrap 15
Can't bind to access partition SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 46
TRAP-TYPE    

accRadiusInvldLenAttrTrap 16
Invalid length in access-accept attribute SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 253
TRAP-TYPE    

accRadiusInvldLenHdrTrap 17
Invalid length in access-accept header SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 253
TRAP-TYPE    

accRadiusInvldAccChallPaktTrap 18
Invalid access-challenge packet received SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 4
TRAP-TYPE    

accRadiusNoChalMsgTrap 19
No challenge message in access-challenge packet SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 5
TRAP-TYPE    

accRadiusInvldAuthActResTrap 20
Invalid authenticator in account-response SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 4
TRAP-TYPE    

accRadiusInvldAuthAccResTrap 21
Invalid authenticator in access-response SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 4
TRAP-TYPE