ACD-CFM-MIB

File: ACD-CFM-MIB.mib (127459 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
ACCEDIAN-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32 Counter32 Counter64
Gauge32 TruthValue DateAndTime
RowStatus DisplayString MODULE-COMPLIANCE
OBJECT-GROUP acdMibs

Defined Types

AcdCfmDmCfgEntry  
SEQUENCE    
  acdCfmDmCfgID Unsigned32
  acdCfmDmCfgRowStatus RowStatus
  acdCfmDmCfgMepIdx Unsigned32
  acdCfmDmCfgRemoteMepId Unsigned32
  acdCfmDmCfgPriority Unsigned32
  acdCfmDmCfgEnable TruthValue
  acdCfmDmCfgInterval Unsigned32
  acdCfmDmCfgRefPeriod Unsigned32
  acdCfmDmCfgOneWayDelayEnable TruthValue
  acdCfmDmCfgOneWayDelayMax Unsigned32
  acdCfmDmCfgOneWayDelayThresh Unsigned32
  acdCfmDmCfgOneWayAvgDelayThresh Unsigned32
  acdCfmDmCfgOneWayDvEnable TruthValue
  acdCfmDmCfgOneWayDvMax Unsigned32
  acdCfmDmCfgOneWayDvThresh Unsigned32
  acdCfmDmCfgOneWayAvgDvThresh Unsigned32
  acdCfmDmCfgTwoWayDelayEnable TruthValue
  acdCfmDmCfgTwoWayDelayMax Unsigned32
  acdCfmDmCfgTwoWayDelayThresh Unsigned32
  acdCfmDmCfgTwoWayAvgDelayThresh Unsigned32
  acdCfmDmCfgTwoWayDvEnable TruthValue
  acdCfmDmCfgTwoWayDvMax Unsigned32
  acdCfmDmCfgTwoWayDvThresh Unsigned32
  acdCfmDmCfgTwoWayAvgDvThresh Unsigned32

AcdCfmResultOneWayDelayEntry  
SEQUENCE    
  acdCfmResultOneWayDelayID Unsigned32
  acdCfmResultOneWayDelayPeriodIndex Unsigned32
  acdCfmResultOneWayDelayIntervalStart DateAndTime
  acdCfmResultOneWayDelayValid TruthValue
  acdCfmResultOneWayDelayAlert TruthValue
  acdCfmResultOneWayDelayAvgAlert TruthValue
  acdCfmResultOneWayDelaySamples Unsigned32
  acdCfmResultOneWayDelayMinValue Integer32
  acdCfmResultOneWayDelayMaxValue Integer32
  acdCfmResultOneWayDelayAvgValue Integer32
  acdCfmResultOneWayDelayThreshExc Unsigned32
  acdCfmResultOneWayDelayInstValue Integer32

AcdCfmResultOneWayDvEntry  
SEQUENCE    
  acdCfmResultOneWayDvID Unsigned32
  acdCfmResultOneWayDvPeriodIndex Unsigned32
  acdCfmResultOneWayDvIntervalStart DateAndTime
  acdCfmResultOneWayDvValid TruthValue
  acdCfmResultOneWayDvAlert TruthValue
  acdCfmResultOneWayDvAvgAlert TruthValue
  acdCfmResultOneWayDvSamples Unsigned32
  acdCfmResultOneWayDvMinValue Integer32
  acdCfmResultOneWayDvMaxValue Integer32
  acdCfmResultOneWayDvAvgValue Integer32
  acdCfmResultOneWayDvThreshExc Unsigned32
  acdCfmResultOneWayDvInstValue Integer32

AcdCfmResultTwoWayDelayEntry  
SEQUENCE    
  acdCfmResultTwoWayDelayID Unsigned32
  acdCfmResultTwoWayDelayPeriodIndex Unsigned32
  acdCfmResultTwoWayDelayIntervalStart DateAndTime
  acdCfmResultTwoWayDelayValid TruthValue
  acdCfmResultTwoWayDelayAlert TruthValue
  acdCfmResultTwoWayDelayAvgAlert TruthValue
  acdCfmResultTwoWayDelaySamples Unsigned32
  acdCfmResultTwoWayDelayMinValue Integer32
  acdCfmResultTwoWayDelayMaxValue Integer32
  acdCfmResultTwoWayDelayAvgValue Integer32
  acdCfmResultTwoWayDelayThreshExc Unsigned32
  acdCfmResultTwoWayDelayInstValue Integer32

AcdCfmResultTwoWayDvEntry  
SEQUENCE    
  acdCfmResultTwoWayDvID Unsigned32
  acdCfmResultTwoWayDvPeriodIndex Unsigned32
  acdCfmResultTwoWayDvIntervalStart DateAndTime
  acdCfmResultTwoWayDvValid TruthValue
  acdCfmResultTwoWayDvAlert TruthValue
  acdCfmResultTwoWayDvAvgAlert TruthValue
  acdCfmResultTwoWayDvSamples Unsigned32
  acdCfmResultTwoWayDvMinValue Integer32
  acdCfmResultTwoWayDvMaxValue Integer32
  acdCfmResultTwoWayDvAvgValue Integer32
  acdCfmResultTwoWayDvThreshExc Unsigned32
  acdCfmResultTwoWayDvInstValue Integer32

AcdCfmHistResultOneWayDelayEntry  
SEQUENCE    
  acdCfmHistResultOneWayDelayID Unsigned32
  acdCfmHistResultOneWayDelaySampleIndex Unsigned32
  acdCfmHistResultOneWayDelayStatus INTEGER
  acdCfmHistResultOneWayDelayDuration Unsigned32
  acdCfmHistResultOneWayDelayIntervalEnd DateAndTime
  acdCfmHistResultOneWayDelaySamples Unsigned32
  acdCfmHistResultOneWayDelayMinValue Integer32
  acdCfmHistResultOneWayDelayMaxValue Integer32
  acdCfmHistResultOneWayDelayAvgValue Integer32
  acdCfmHistResultOneWayDelayThreshExc Unsigned32

AcdCfmHistResultOneWayDvEntry  
SEQUENCE    
  acdCfmHistResultOneWayDvID Unsigned32
  acdCfmHistResultOneWayDvSampleIndex Unsigned32
  acdCfmHistResultOneWayDvStatus INTEGER
  acdCfmHistResultOneWayDvDuration Unsigned32
  acdCfmHistResultOneWayDvIntervalEnd DateAndTime
  acdCfmHistResultOneWayDvSamples Unsigned32
  acdCfmHistResultOneWayDvMinValue Integer32
  acdCfmHistResultOneWayDvMaxValue Integer32
  acdCfmHistResultOneWayDvAvgValue Integer32
  acdCfmHistResultOneWayDvThreshExc Unsigned32

AcdCfmHistResultTwoWayDelayEntry  
SEQUENCE    
  acdCfmHistResultTwoWayDelayID Unsigned32
  acdCfmHistResultTwoWayDelaySampleIndex Unsigned32
  acdCfmHistResultTwoWayDelayStatus INTEGER
  acdCfmHistResultTwoWayDelayDuration Unsigned32
  acdCfmHistResultTwoWayDelayIntervalEnd DateAndTime
  acdCfmHistResultTwoWayDelaySamples Unsigned32
  acdCfmHistResultTwoWayDelayMinValue Integer32
  acdCfmHistResultTwoWayDelayMaxValue Integer32
  acdCfmHistResultTwoWayDelayAvgValue Integer32
  acdCfmHistResultTwoWayDelayThreshExc Unsigned32

AcdCfmHistResultTwoWayDvEntry  
SEQUENCE    
  acdCfmHistResultTwoWayDvID Unsigned32
  acdCfmHistResultTwoWayDvSampleIndex Unsigned32
  acdCfmHistResultTwoWayDvStatus INTEGER
  acdCfmHistResultTwoWayDvDuration Unsigned32
  acdCfmHistResultTwoWayDvIntervalEnd DateAndTime
  acdCfmHistResultTwoWayDvSamples Unsigned32
  acdCfmHistResultTwoWayDvMinValue Integer32
  acdCfmHistResultTwoWayDvMaxValue Integer32
  acdCfmHistResultTwoWayDvAvgValue Integer32
  acdCfmHistResultTwoWayDvThreshExc Unsigned32

AcdCfmPktLossCfgEntry  
SEQUENCE    
  acdCfmPktLossCfgID Unsigned32
  acdCfmPktLossCfgRowStatus RowStatus
  acdCfmPktLossCfgMepIdx Unsigned32
  acdCfmPktLossCfgRemoteMepId Unsigned32
  acdCfmPktLossCfgPriority Unsigned32
  acdCfmPktLossCfgEnable TruthValue
  acdCfmPktLossCfgInterval Unsigned32
  acdCfmPktLossCfgRefPeriod Unsigned32
  acdCfmPktLossCfgThresh Unsigned32
  acdCfmPktLossCfgRatioThresh Unsigned32

AcdCfmResultPktLossEntry  
SEQUENCE    
  acdCfmResultPktLossID Unsigned32
  acdCfmResultPktLossPeriodIndex Unsigned32
  acdCfmResultPktLossIntervalStart DateAndTime
  acdCfmResultPktLossValid TruthValue
  acdCfmResultPktLossAlert TruthValue
  acdCfmResultPktLossSamples Counter32
  acdCfmResultPktLossOverflowSamples Counter32
  acdCfmResultPktLossHCSamples Counter64
  acdCfmResultPktLossNbrLoss Counter32
  acdCfmResultPktLossOverflowNbrLoss Counter32
  acdCfmResultPktLossHCNbrLoss Counter64
  acdCfmResultPktLossNbrGaps Counter32
  acdCfmResultPktLossOverflowNbrGaps Counter32
  acdCfmResultPktLossHCNbrGaps Counter64
  acdCfmResultPktLossLargestGap Counter32
  acdCfmResultPktLossOverflowLargestGap Counter32
  acdCfmResultPktLossHCLargestGap Counter64
  acdCfmResultPktLossRatio Unsigned32

AcdCfmHistResultPktLossEntry  
SEQUENCE    
  acdCfmHistResultPktLossID Unsigned32
  acdCfmHistResultPktLossSampleIndex Unsigned32
  acdCfmHistResultPktLossStatus INTEGER
  acdCfmHistResultPktLossDuration Unsigned32
  acdCfmHistResultPktLossIntervalEnd DateAndTime
  acdCfmHistResultPktLossSamples Counter32
  acdCfmHistResultPktLossOverflowSamples Counter32
  acdCfmHistResultPktLossHCSamples Counter64
  acdCfmHistResultPktLossNbrLoss Counter32
  acdCfmHistResultPktLossOverflowNbrLoss Counter32
  acdCfmHistResultPktLossHCNbrLoss Counter64
  acdCfmHistResultPktLossNbrGaps Counter32
  acdCfmHistResultPktLossOverflowNbrGaps Counter32
  acdCfmHistResultPktLossHCNbrGaps Counter64
  acdCfmHistResultPktLossLargestGap Counter32
  acdCfmHistResultPktLossOverflowLargestGap Counter32
  acdCfmHistResultPktLossHCLargestGap Counter64
  acdCfmHistResultPktLossRatio Unsigned32

AcdCfmSlmCfgEntry  
SEQUENCE    
  acdCfmSlmCfgID Unsigned32
  acdCfmSlmCfgRowStatus RowStatus
  acdCfmSlmCfgMepIdx Unsigned32
  acdCfmSlmCfgRemoteMepId Unsigned32
  acdCfmSlmCfgPriority Unsigned32
  acdCfmSlmCfgState TruthValue
  acdCfmSlmCfgInterval Unsigned32
  acdCfmSlmCfgRefPeriod Unsigned32
  acdCfmSlmCfgNearEndThresh Unsigned32
  acdCfmSlmCfgFarEndThresh Unsigned32
  acdCfmSlmCfgName DisplayString

AcdCfmSlmResultEntry  
SEQUENCE    
  acdCfmSlmResultID Unsigned32
  acdCfmSlmResultPeriodIndex Unsigned32
  acdCfmSlmResultIntervalStart DateAndTime
  acdCfmSlmResultValid TruthValue
  acdCfmSlmResultNearEndAlert TruthValue
  acdCfmSlmResultFarEndAlert TruthValue
  acdCfmSlmResultTxSlm Counter32
  acdCfmSlmResultRxSlr Counter32
  acdCfmSlmResultRemoteRxSlm Counter32
  acdCfmSlmResultNearEndNbrLoss Counter32
  acdCfmSlmResultFarEndNbrLoss Counter32
  acdCfmSlmResultNearEndRatio Gauge32
  acdCfmSlmResultFarEndRatio Gauge32
  acdCfmSlmResultNbrGaps Counter32
  acdCfmSlmResultLargestGap Counter32

AcdCfmSlmHistResultEntry  
SEQUENCE    
  acdCfmSlmHistResultID Unsigned32
  acdCfmSlmHistResultPeriodIndex Unsigned32
  acdCfmSlmHistResultIntervalEnd DateAndTime
  acdCfmSlmHistResultTxSlm Counter32
  acdCfmSlmHistResultRxSlr Counter32
  acdCfmSlmHistResultRemoteRxSlm Counter32
  acdCfmSlmHistResultNearEndRatio Gauge32
  acdCfmSlmHistResultFarEndRatio Gauge32
  acdCfmSlmHistResultNbrGaps Counter32
  acdCfmSlmHistResultLargestGap Counter32
  acdCfmSlmHistResultInstanceIndex Unsigned32

AcdCfmMepStatsTxEntry  
SEQUENCE    
  acdCfmMepStatsTxID Unsigned32
  acdCfmMepStatsTxCcmPdu Counter64
  acdCfmMepStatsTxLbmPdu Counter64
  acdCfmMepStatsTxLbrPdu Counter64
  acdCfmMepStatsTxLtmPdu Counter64
  acdCfmMepStatsTxLtrPdu Counter64
  acdCfmMepStatsTxAisPdu Counter64
  acdCfmMepStatsTxLckPdu Counter64
  acdCfmMepStatsTxTstPdu Counter64
  acdCfmMepStatsTxLinearApsPdu Counter64
  acdCfmMepStatsTxRingApsPdu Counter64
  acdCfmMepStatsTxMccPdu Counter64
  acdCfmMepStatsTxLmmPdu Counter64
  acdCfmMepStatsTxLmrPdu Counter64
  acdCfmMepStatsTx1dmPdu Counter64
  acdCfmMepStatsTxDmmPdu Counter64
  acdCfmMepStatsTxDmrPdu Counter64
  acdCfmMepStatsTxExmPdu Counter64
  acdCfmMepStatsTxExrPdu Counter64
  acdCfmMepStatsTxVsmPdu Counter64
  acdCfmMepStatsTxVsrPdu Counter64
  acdCfmMepStatsTxCsfPdu Counter64
  acdCfmMepStatsTxSlmPdu Counter64
  acdCfmMepStatsTxSlrPdu Counter64

AcdCfmMepStatsRxEntry  
SEQUENCE    
  acdCfmMepStatsRxID Unsigned32
  acdCfmMepStatsRxCcmPdu Counter64
  acdCfmMepStatsRxLbmPdu Counter64
  acdCfmMepStatsRxLbrPdu Counter64
  acdCfmMepStatsRxLtmPdu Counter64
  acdCfmMepStatsRxLtrPdu Counter64
  acdCfmMepStatsRxAisPdu Counter64
  acdCfmMepStatsRxLckPdu Counter64
  acdCfmMepStatsRxTstPdu Counter64
  acdCfmMepStatsRxLinearApsPdu Counter64
  acdCfmMepStatsRxRingApsPdu Counter64
  acdCfmMepStatsRxMccPdu Counter64
  acdCfmMepStatsRxLmmPdu Counter64
  acdCfmMepStatsRxLmrPdu Counter64
  acdCfmMepStatsRx1dmPdu Counter64
  acdCfmMepStatsRxDmmPdu Counter64
  acdCfmMepStatsRxDmrPdu Counter64
  acdCfmMepStatsRxExmPdu Counter64
  acdCfmMepStatsRxExrPdu Counter64
  acdCfmMepStatsRxVsmPdu Counter64
  acdCfmMepStatsRxVsrPdu Counter64
  acdCfmMepStatsRxCcmSeqErrors Counter64
  acdCfmMepStatsRxLtrUnexpectedPdu Counter64
  acdCfmMepStatsRxLtrMacErrors Counter64
  acdCfmMepStatsRxLbrOooErrors Counter64
  acdCfmMepStatsRxLbrUnexpectedPdu Counter64
  acdCfmMepStatsRxLbrDataErrors Counter64
  acdCfmMepStatsRxCsfPdu Counter64
  acdCfmMepStatsRxSlmPdu Counter64
  acdCfmMepStatsRxSlrPdu Counter64

AcdCfmMepDmStatsEntry  
SEQUENCE    
  acdCfmMepDmStatsID Unsigned32
  acdCfmMepDmStatsPriority Unsigned32
  acdCfmMepDmStatsTxDmmPdu Counter64
  acdCfmMepDmStatsRxDmmPdu Counter64
  acdCfmMepDmStatsTxDmrPdu Counter64
  acdCfmMepDmStatsRxDmrPdu Counter64

AcdCfmStackEntry  
SEQUENCE    
  acdCfmMdIdx Unsigned32
  acdCfmMaIdx Unsigned32
  acdCfmMepID Unsigned32
  acdCfmMepIdx Unsigned32

Defined Values

acdCfm 1.3.6.1.4.1.22420.2.7
This MIB is complementary to the IEEE P802.1ag(TM) CFM MIB. It covers the delay measurment and the packet loss configuration and results.
MODULE-IDENTITY    

acdCfmNotifications 1.3.6.1.4.1.22420.2.7.0
OBJECT IDENTIFIER    

acdCfmMIBObjects 1.3.6.1.4.1.22420.2.7.1
OBJECT IDENTIFIER    

acdCfmConformance 1.3.6.1.4.1.22420.2.7.2
OBJECT IDENTIFIER    

acdCfmDelayMeasurement 1.3.6.1.4.1.22420.2.7.1.1
OBJECT IDENTIFIER    

acdCfmPacketLoss 1.3.6.1.4.1.22420.2.7.1.2
OBJECT IDENTIFIER    

acdCfmMep 1.3.6.1.4.1.22420.2.7.1.3
OBJECT IDENTIFIER    

acdCfmStack 1.3.6.1.4.1.22420.2.7.1.4
OBJECT IDENTIFIER    

acdCfmSlm 1.3.6.1.4.1.22420.2.7.1.5
OBJECT IDENTIFIER    

acdCfmDmCfgTable 1.3.6.1.4.1.22420.2.7.1.1.1
Configuration table of all DM entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmDmCfgEntry

acdCfmDmCfgEntry 1.3.6.1.4.1.22420.2.7.1.1.1.1
An entry consisting of all settings to manage a DM instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmDmCfgEntry  

acdCfmDmCfgID 1.3.6.1.4.1.22420.2.7.1.1.1.1.1
Unique value for each Delay Measurement instance. This value follows the ordering of the results table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmDmCfgRowStatus 1.3.6.1.4.1.22420.2.7.1.1.1.1.2
All columns must have a valid value before a row can be activated.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

acdCfmDmCfgMepIdx 1.3.6.1.4.1.22420.2.7.1.1.1.1.3
Maintenance association End Point Identifier.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

acdCfmDmCfgRemoteMepId 1.3.6.1.4.1.22420.2.7.1.1.1.1.4
Remote Maintenance association End Point Identifier used for this delay measurement configuration.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8191  

acdCfmDmCfgPriority 1.3.6.1.4.1.22420.2.7.1.1.1.1.5
The VLAN priority. Its value ranges from 0 to 7.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..7  

acdCfmDmCfgEnable 1.3.6.1.4.1.22420.2.7.1.1.1.1.6
Enable CFM to issues DMM measurement packets.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

acdCfmDmCfgInterval 1.3.6.1.4.1.22420.2.7.1.1.1.1.7
Interval in milliseconds at which CFM issues DMM measurement packets.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..60000  

acdCfmDmCfgRefPeriod 1.3.6.1.4.1.22420.2.7.1.1.1.1.8
Reference period in minutes for Delay Measurement.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..1440  

acdCfmDmCfgOneWayDelayEnable 1.3.6.1.4.1.22420.2.7.1.1.1.1.9
Enable CFM to compute one-way delay measurements.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

acdCfmDmCfgOneWayDelayMax 1.3.6.1.4.1.22420.2.7.1.1.1.1.10
Maximum allowed instantaneous delay in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdCfmDmCfgOneWayDelayThresh 1.3.6.1.4.1.22420.2.7.1.1.1.1.11
Number of consecutive delay greater than the maximum allowed value before alert.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdCfmDmCfgOneWayAvgDelayThresh 1.3.6.1.4.1.22420.2.7.1.1.1.1.12
One-way average delay threshold in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdCfmDmCfgOneWayDvEnable 1.3.6.1.4.1.22420.2.7.1.1.1.1.13
Enable CFM to compute one-way delay variation measurements.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

acdCfmDmCfgOneWayDvMax 1.3.6.1.4.1.22420.2.7.1.1.1.1.14
Maximum allowed instantaneous delay variation in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdCfmDmCfgOneWayDvThresh 1.3.6.1.4.1.22420.2.7.1.1.1.1.15
Number of consecutive delay variation greater than the maximum allowed value before alert.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdCfmDmCfgOneWayAvgDvThresh 1.3.6.1.4.1.22420.2.7.1.1.1.1.16
One-way average delay variation threshold in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdCfmDmCfgTwoWayDelayEnable 1.3.6.1.4.1.22420.2.7.1.1.1.1.17
Enable CFM to compute Two-way delay measurements.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

acdCfmDmCfgTwoWayDelayMax 1.3.6.1.4.1.22420.2.7.1.1.1.1.18
Maximum allowed instantaneous delay in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdCfmDmCfgTwoWayDelayThresh 1.3.6.1.4.1.22420.2.7.1.1.1.1.19
Number of consecutive delay greater than the maximum allowed value before alert.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdCfmDmCfgTwoWayAvgDelayThresh 1.3.6.1.4.1.22420.2.7.1.1.1.1.20
Two-way average delay threshold in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdCfmDmCfgTwoWayDvEnable 1.3.6.1.4.1.22420.2.7.1.1.1.1.21
Enable CFM to compute Two-way delay variation measurements.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

acdCfmDmCfgTwoWayDvMax 1.3.6.1.4.1.22420.2.7.1.1.1.1.22
Maximum allowed instantaneous delay variation in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdCfmDmCfgTwoWayDvThresh 1.3.6.1.4.1.22420.2.7.1.1.1.1.23
Number of consecutive delay variation greater than the maximum allowed value before alert.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdCfmDmCfgTwoWayAvgDvThresh 1.3.6.1.4.1.22420.2.7.1.1.1.1.24
Two-way average delay variation threshold in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdCfmResultOneWayDelayTable 1.3.6.1.4.1.22420.2.7.1.1.2
One way delay result table of all DM entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmResultOneWayDelayEntry

acdCfmResultOneWayDelayEntry 1.3.6.1.4.1.22420.2.7.1.1.2.1
An entry consisting of One Way Delay results for a DM entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmResultOneWayDelayEntry  

acdCfmResultOneWayDelayID 1.3.6.1.4.1.22420.2.7.1.1.2.1.1
Unique value for each Delay Measurement instance. This value follows the ordering of the Dm table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmResultOneWayDelayPeriodIndex 1.3.6.1.4.1.22420.2.7.1.1.2.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmResultOneWayDelayIntervalStart 1.3.6.1.4.1.22420.2.7.1.1.2.1.3
This is the time of the start of the period.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdCfmResultOneWayDelayValid 1.3.6.1.4.1.22420.2.7.1.1.2.1.4
Indicates the validity of the One-way delay results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmResultOneWayDelayAlert 1.3.6.1.4.1.22420.2.7.1.1.2.1.5
Indicate the presence of the One Way Delay alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmResultOneWayDelayAvgAlert 1.3.6.1.4.1.22420.2.7.1.1.2.1.6
Indicate the presence of the One Way Average Delay alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmResultOneWayDelaySamples 1.3.6.1.4.1.22420.2.7.1.1.2.1.7
Indicates the number of samples gathered during the sampling interval to calculate One-way delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmResultOneWayDelayMinValue 1.3.6.1.4.1.22420.2.7.1.1.2.1.8
Indicates the One-way delay minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmResultOneWayDelayMaxValue 1.3.6.1.4.1.22420.2.7.1.1.2.1.9
Indicates the One-way delay maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmResultOneWayDelayAvgValue 1.3.6.1.4.1.22420.2.7.1.1.2.1.10
Indicates the One-way delay average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmResultOneWayDelayThreshExc 1.3.6.1.4.1.22420.2.7.1.1.2.1.11
Indicates the number of samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmResultOneWayDelayInstValue 1.3.6.1.4.1.22420.2.7.1.1.2.1.12
Indicates the One-way delay Instantaneous value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmResultOneWayDvTable 1.3.6.1.4.1.22420.2.7.1.1.3
One way delay variation result table of all DM entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmResultOneWayDvEntry

acdCfmResultOneWayDvEntry 1.3.6.1.4.1.22420.2.7.1.1.3.1
An entry consisting of One Way Delay variation results for a DM entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmResultOneWayDvEntry  

acdCfmResultOneWayDvID 1.3.6.1.4.1.22420.2.7.1.1.3.1.1
Unique value for each Delay variation Measurement instance. This value follows the ordering of the DM table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmResultOneWayDvPeriodIndex 1.3.6.1.4.1.22420.2.7.1.1.3.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmResultOneWayDvIntervalStart 1.3.6.1.4.1.22420.2.7.1.1.3.1.3
This is the time of the start of the period.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdCfmResultOneWayDvValid 1.3.6.1.4.1.22420.2.7.1.1.3.1.4
Indicates the validity of the One-way delay variation results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmResultOneWayDvAlert 1.3.6.1.4.1.22420.2.7.1.1.3.1.5
Indicate the presence of the One Way Delay variation alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmResultOneWayDvAvgAlert 1.3.6.1.4.1.22420.2.7.1.1.3.1.6
Indicate the presence of the One Way Average Delay variation alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmResultOneWayDvSamples 1.3.6.1.4.1.22420.2.7.1.1.3.1.7
Indicates the number of samples gathered during the sampling interval to calculate One-way delay variation results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmResultOneWayDvMinValue 1.3.6.1.4.1.22420.2.7.1.1.3.1.8
Indicates the One-way delay variation minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmResultOneWayDvMaxValue 1.3.6.1.4.1.22420.2.7.1.1.3.1.9
Indicates the One-way delay variationmaximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmResultOneWayDvAvgValue 1.3.6.1.4.1.22420.2.7.1.1.3.1.10
Indicates the One-way delay variation average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmResultOneWayDvThreshExc 1.3.6.1.4.1.22420.2.7.1.1.3.1.11
Indicates the number of samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmResultOneWayDvInstValue 1.3.6.1.4.1.22420.2.7.1.1.3.1.12
Indicates the One-way delay variation Instantaneous value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmResultTwoWayDelayTable 1.3.6.1.4.1.22420.2.7.1.1.4
Two way delay result table of all DM entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmResultTwoWayDelayEntry

acdCfmResultTwoWayDelayEntry 1.3.6.1.4.1.22420.2.7.1.1.4.1
An entry consisting of Two Way Delay results for a DM entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmResultTwoWayDelayEntry  

acdCfmResultTwoWayDelayID 1.3.6.1.4.1.22420.2.7.1.1.4.1.1
Unique value for each Delay Measurement instance. This value follows the ordering of the Dm table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmResultTwoWayDelayPeriodIndex 1.3.6.1.4.1.22420.2.7.1.1.4.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmResultTwoWayDelayIntervalStart 1.3.6.1.4.1.22420.2.7.1.1.4.1.3
This is the time of the start of the period.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdCfmResultTwoWayDelayValid 1.3.6.1.4.1.22420.2.7.1.1.4.1.4
Indicates the validity of the Two way delay results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmResultTwoWayDelayAlert 1.3.6.1.4.1.22420.2.7.1.1.4.1.5
Indicate the presence of the Two Way Delay alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmResultTwoWayDelayAvgAlert 1.3.6.1.4.1.22420.2.7.1.1.4.1.6
Indicate the presence of the Two Way Average Delay alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmResultTwoWayDelaySamples 1.3.6.1.4.1.22420.2.7.1.1.4.1.7
Indicates the number of samples gathered during the sampling interval to calculate Two-way delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmResultTwoWayDelayMinValue 1.3.6.1.4.1.22420.2.7.1.1.4.1.8
Indicates the Two-way delay minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmResultTwoWayDelayMaxValue 1.3.6.1.4.1.22420.2.7.1.1.4.1.9
Indicates the Two-way delay maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmResultTwoWayDelayAvgValue 1.3.6.1.4.1.22420.2.7.1.1.4.1.10
Indicates the Two-way delay average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmResultTwoWayDelayThreshExc 1.3.6.1.4.1.22420.2.7.1.1.4.1.11
Indicates the number of samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmResultTwoWayDelayInstValue 1.3.6.1.4.1.22420.2.7.1.1.4.1.12
Indicates the Two-way delay Instantaneous value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmResultTwoWayDvTable 1.3.6.1.4.1.22420.2.7.1.1.5
Two way delay variation result table of all DM entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmResultTwoWayDvEntry

acdCfmResultTwoWayDvEntry 1.3.6.1.4.1.22420.2.7.1.1.5.1
An entry consisting of One Way Delay variation results for a DM entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmResultTwoWayDvEntry  

acdCfmResultTwoWayDvID 1.3.6.1.4.1.22420.2.7.1.1.5.1.1
Unique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmResultTwoWayDvPeriodIndex 1.3.6.1.4.1.22420.2.7.1.1.5.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmResultTwoWayDvIntervalStart 1.3.6.1.4.1.22420.2.7.1.1.5.1.3
This is the time of the start of the period.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdCfmResultTwoWayDvValid 1.3.6.1.4.1.22420.2.7.1.1.5.1.4
Indicates the validity of the two-way delay variation results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmResultTwoWayDvAlert 1.3.6.1.4.1.22420.2.7.1.1.5.1.5
Indicate the presence of the Two Way Delay variation alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmResultTwoWayDvAvgAlert 1.3.6.1.4.1.22420.2.7.1.1.5.1.6
Indicate the presence of the Two Way Average Delay variation alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmResultTwoWayDvSamples 1.3.6.1.4.1.22420.2.7.1.1.5.1.7
Indicates the number of samples gathered during the sampling interval to calculate Two-way delay variation results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmResultTwoWayDvMinValue 1.3.6.1.4.1.22420.2.7.1.1.5.1.8
Indicates the two-way delay variation minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmResultTwoWayDvMaxValue 1.3.6.1.4.1.22420.2.7.1.1.5.1.9
Indicates the two-way delay variation maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmResultTwoWayDvAvgValue 1.3.6.1.4.1.22420.2.7.1.1.5.1.10
Indicates the two-way delay variation average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmResultTwoWayDvThreshExc 1.3.6.1.4.1.22420.2.7.1.1.5.1.11
Indicates the number of samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmResultTwoWayDvInstValue 1.3.6.1.4.1.22420.2.7.1.1.5.1.12
Indicates the two-way delay variation Instantaneous value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmHistResultOneWayDelayTable 1.3.6.1.4.1.22420.2.7.1.1.6
One way delay result table of all DM entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmHistResultOneWayDelayEntry

acdCfmHistResultOneWayDelayEntry 1.3.6.1.4.1.22420.2.7.1.1.6.1
An entry consisting of One Way Delay results for a DM entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmHistResultOneWayDelayEntry  

acdCfmHistResultOneWayDelayID 1.3.6.1.4.1.22420.2.7.1.1.6.1.1
Unique value for each Delay Measurement instance. This value follows the ordering of the Dm table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultOneWayDelaySampleIndex 1.3.6.1.4.1.22420.2.7.1.1.6.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultOneWayDelayStatus 1.3.6.1.4.1.22420.2.7.1.1.6.1.3
Indicates the validity of the One-way delay results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

acdCfmHistResultOneWayDelayDuration 1.3.6.1.4.1.22420.2.7.1.1.6.1.4
Unique value for each Delay Measurement instance. This value follows the ordering of the Dm table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultOneWayDelayIntervalEnd 1.3.6.1.4.1.22420.2.7.1.1.6.1.5
This is the time of the end of the period.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdCfmHistResultOneWayDelaySamples 1.3.6.1.4.1.22420.2.7.1.1.6.1.6
Indicates the number of samples gathered during the sampling interval to calculate One-way delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultOneWayDelayMinValue 1.3.6.1.4.1.22420.2.7.1.1.6.1.7
Indicates the One-way delay minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmHistResultOneWayDelayMaxValue 1.3.6.1.4.1.22420.2.7.1.1.6.1.8
Indicates the One-way delay maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmHistResultOneWayDelayAvgValue 1.3.6.1.4.1.22420.2.7.1.1.6.1.9
Indicates the One-way delay average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmHistResultOneWayDelayThreshExc 1.3.6.1.4.1.22420.2.7.1.1.6.1.10
Indicates the number of samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultOneWayDvTable 1.3.6.1.4.1.22420.2.7.1.1.7
One way delay variation result table of all DM entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmHistResultOneWayDvEntry

acdCfmHistResultOneWayDvEntry 1.3.6.1.4.1.22420.2.7.1.1.7.1
An entry consisting of One Way Delay variation results for a DM entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmHistResultOneWayDvEntry  

acdCfmHistResultOneWayDvID 1.3.6.1.4.1.22420.2.7.1.1.7.1.1
Unique value for each Delay variation Measurement instance. This value follows the ordering of the DM table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultOneWayDvSampleIndex 1.3.6.1.4.1.22420.2.7.1.1.7.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultOneWayDvStatus 1.3.6.1.4.1.22420.2.7.1.1.7.1.3
Indicates the validity of the One-way delay variation results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

acdCfmHistResultOneWayDvDuration 1.3.6.1.4.1.22420.2.7.1.1.7.1.4
The interval in seconds over which the data is sampled for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultOneWayDvIntervalEnd 1.3.6.1.4.1.22420.2.7.1.1.7.1.5
This is the time of the end of the period.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdCfmHistResultOneWayDvSamples 1.3.6.1.4.1.22420.2.7.1.1.7.1.6
Indicates the number of samples gathered during the sampling interval to calculate One-way delay variation results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultOneWayDvMinValue 1.3.6.1.4.1.22420.2.7.1.1.7.1.7
Indicates the One-way delay variation minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmHistResultOneWayDvMaxValue 1.3.6.1.4.1.22420.2.7.1.1.7.1.8
Indicates the One-way delay variationmaximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmHistResultOneWayDvAvgValue 1.3.6.1.4.1.22420.2.7.1.1.7.1.9
Indicates the One-way delay variation average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmHistResultOneWayDvThreshExc 1.3.6.1.4.1.22420.2.7.1.1.7.1.10
Indicates the number of samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultTwoWayDelayTable 1.3.6.1.4.1.22420.2.7.1.1.8
Two way delay result table of all DM entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmHistResultTwoWayDelayEntry

acdCfmHistResultTwoWayDelayEntry 1.3.6.1.4.1.22420.2.7.1.1.8.1
An entry consisting of Two Way Delay results for a DM entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmHistResultTwoWayDelayEntry  

acdCfmHistResultTwoWayDelayID 1.3.6.1.4.1.22420.2.7.1.1.8.1.1
Unique value for each Delay Measurement instance. This value follows the ordering of the Dm table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultTwoWayDelaySampleIndex 1.3.6.1.4.1.22420.2.7.1.1.8.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultTwoWayDelayStatus 1.3.6.1.4.1.22420.2.7.1.1.8.1.3
Indicates the validity of the Two way delay results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

acdCfmHistResultTwoWayDelayDuration 1.3.6.1.4.1.22420.2.7.1.1.8.1.4
The interval in seconds over which the data is sampled for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultTwoWayDelayIntervalEnd 1.3.6.1.4.1.22420.2.7.1.1.8.1.5
This is the time of the end of the period.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdCfmHistResultTwoWayDelaySamples 1.3.6.1.4.1.22420.2.7.1.1.8.1.6
Indicates the number of samples gathered during the sampling interval to calculate Two-way delay results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultTwoWayDelayMinValue 1.3.6.1.4.1.22420.2.7.1.1.8.1.7
Indicates the Two-way delay minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmHistResultTwoWayDelayMaxValue 1.3.6.1.4.1.22420.2.7.1.1.8.1.8
Indicates the Two-way delay maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmHistResultTwoWayDelayAvgValue 1.3.6.1.4.1.22420.2.7.1.1.8.1.9
Indicates the Two-way delay average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmHistResultTwoWayDelayThreshExc 1.3.6.1.4.1.22420.2.7.1.1.8.1.10
Indicates the number of samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultTwoWayDvTable 1.3.6.1.4.1.22420.2.7.1.1.9
Two way delay variation result table of all DM entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmHistResultTwoWayDvEntry

acdCfmHistResultTwoWayDvEntry 1.3.6.1.4.1.22420.2.7.1.1.9.1
An entry consisting of two Way Delay variation results for a DM entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmHistResultTwoWayDvEntry  

acdCfmHistResultTwoWayDvID 1.3.6.1.4.1.22420.2.7.1.1.9.1.1
Unique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultTwoWayDvSampleIndex 1.3.6.1.4.1.22420.2.7.1.1.9.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultTwoWayDvStatus 1.3.6.1.4.1.22420.2.7.1.1.9.1.3
Indicates the validity of the two-way delay variation results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

acdCfmHistResultTwoWayDvDuration 1.3.6.1.4.1.22420.2.7.1.1.9.1.4
The interval in seconds over which the data is sampled for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultTwoWayDvIntervalEnd 1.3.6.1.4.1.22420.2.7.1.1.9.1.5
This is the time of the end of the period.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdCfmHistResultTwoWayDvSamples 1.3.6.1.4.1.22420.2.7.1.1.9.1.6
Indicates the number of samples gathered during the sampling interval to calculate Two-way delay variation results.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultTwoWayDvMinValue 1.3.6.1.4.1.22420.2.7.1.1.9.1.7
Indicates the two-way delay variation minimum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmHistResultTwoWayDvMaxValue 1.3.6.1.4.1.22420.2.7.1.1.9.1.8
Indicates the two-way delay variation maximum value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmHistResultTwoWayDvAvgValue 1.3.6.1.4.1.22420.2.7.1.1.9.1.9
Indicates the two-way delay variation average value. The value is expressed in micro-seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

acdCfmHistResultTwoWayDvThreshExc 1.3.6.1.4.1.22420.2.7.1.1.9.1.10
Indicates the number of samples exceeding the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmPktLossCfgTable 1.3.6.1.4.1.22420.2.7.1.2.1
Configuration table of all Packet Loss entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmPktLossCfgEntry

acdCfmPktLossCfgEntry 1.3.6.1.4.1.22420.2.7.1.2.1.1
An entry consisting of all settings to manage a Packet loss instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmPktLossCfgEntry  

acdCfmPktLossCfgID 1.3.6.1.4.1.22420.2.7.1.2.1.1.1
Unique value for each Packet Loss instance. This value follows the ordering the results table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmPktLossCfgRowStatus 1.3.6.1.4.1.22420.2.7.1.2.1.1.2
The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

acdCfmPktLossCfgMepIdx 1.3.6.1.4.1.22420.2.7.1.2.1.1.3
Maintenance association End Point Identifier.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

acdCfmPktLossCfgRemoteMepId 1.3.6.1.4.1.22420.2.7.1.2.1.1.4
Remote Maintenance association End Point Identifier.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..8191  

acdCfmPktLossCfgPriority 1.3.6.1.4.1.22420.2.7.1.2.1.1.5
The VLAN priority. Its value ranges from 0 to 7. Same has CCM priority for packet loss based on CCM.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..7  

acdCfmPktLossCfgEnable 1.3.6.1.4.1.22420.2.7.1.2.1.1.6
Enable CFM to perform Packet Loss measurement.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

acdCfmPktLossCfgInterval 1.3.6.1.4.1.22420.2.7.1.2.1.1.7
Interval in milliseconds at which CFM issues Packet Loss measurement packets. Same has CCM interval for packet loss based on CCM.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..60000  

acdCfmPktLossCfgRefPeriod 1.3.6.1.4.1.22420.2.7.1.2.1.1.8
Reference period in minutes for Packet Loss Measurement.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..1440  

acdCfmPktLossCfgThresh 1.3.6.1.4.1.22420.2.7.1.2.1.1.9
Maximum number of packet loss allowed without issuing an alarm.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

acdCfmPktLossCfgRatioThresh 1.3.6.1.4.1.22420.2.7.1.2.1.1.10
Packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100000000  

acdCfmResultPktLossTable 1.3.6.1.4.1.22420.2.7.1.2.2
Packet loss result table of a MEP and remote MEP pair.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmResultPktLossEntry

acdCfmResultPktLossEntry 1.3.6.1.4.1.22420.2.7.1.2.2.1
An entry consisting of packet loss result for a specific MEP and remote MEP pair.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmResultPktLossEntry  

acdCfmResultPktLossID 1.3.6.1.4.1.22420.2.7.1.2.2.1.1
Unique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmResultPktLossPeriodIndex 1.3.6.1.4.1.22420.2.7.1.2.2.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 and increases by one as each new period.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmResultPktLossIntervalStart 1.3.6.1.4.1.22420.2.7.1.2.2.1.3
This is the time of the start of the period.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdCfmResultPktLossValid 1.3.6.1.4.1.22420.2.7.1.2.2.1.4
Indicates the validity of the packet loss results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmResultPktLossAlert 1.3.6.1.4.1.22420.2.7.1.2.2.1.5
Indicate the presence of the Packet Loss alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmResultPktLossSamples 1.3.6.1.4.1.22420.2.7.1.2.2.1.6
Indicates the number of samples gathered during the sampling interval to calculate packet loss results.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmResultPktLossOverflowSamples 1.3.6.1.4.1.22420.2.7.1.2.2.1.7
The number of times the associated acdCfmResultPktLossSamples counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmResultPktLossSamples, it provides the equivalent of the 64 bits counter acdCfmResultPktLossHCSamples.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmResultPktLossHCSamples 1.3.6.1.4.1.22420.2.7.1.2.2.1.8
Indicates the number of samples gathered during the sampling interval to calculate packet loss results.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmResultPktLossNbrLoss 1.3.6.1.4.1.22420.2.7.1.2.2.1.9
This is the number of packet loss.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmResultPktLossOverflowNbrLoss 1.3.6.1.4.1.22420.2.7.1.2.2.1.10
The number of times the associated acdCfmResultPktLossNbrLoss counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmResultPktLossNbrLoss, it provides the equivalent of the 64 bits counter acdCfmResultPktLossHCNbrLoss.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmResultPktLossHCNbrLoss 1.3.6.1.4.1.22420.2.7.1.2.2.1.11
This is the number of packet loss.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmResultPktLossNbrGaps 1.3.6.1.4.1.22420.2.7.1.2.2.1.12
This is the number of gap.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmResultPktLossOverflowNbrGaps 1.3.6.1.4.1.22420.2.7.1.2.2.1.13
The number of times the associated acdCfmResultPktLossNbrGaps counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmResultPktLossNbrGaps, it provides the equivalent of the 64 bits counter acdCfmResultPktLossHCNbrGaps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmResultPktLossHCNbrGaps 1.3.6.1.4.1.22420.2.7.1.2.2.1.14
This is the number of gap.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmResultPktLossLargestGap 1.3.6.1.4.1.22420.2.7.1.2.2.1.15
the largest gap size in packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmResultPktLossOverflowLargestGap 1.3.6.1.4.1.22420.2.7.1.2.2.1.16
The number of times the associated acdCfmResultPktLossLargestGap counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmResultPktLossLargestGap, it provides the equivalent of the 64 bits counter acdCfmResultPktLossHCLargestGap.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmResultPktLossHCLargestGap 1.3.6.1.4.1.22420.2.7.1.2.2.1.17
the largest gap size in packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmResultPktLossRatio 1.3.6.1.4.1.22420.2.7.1.2.2.1.18
Indicates the packet loss ratio. The packet loss ratio is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000000  

acdCfmHistResultPktLossTable 1.3.6.1.4.1.22420.2.7.1.2.3
Packet loss history result table of a MEP and remote MEP pair.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmHistResultPktLossEntry

acdCfmHistResultPktLossEntry 1.3.6.1.4.1.22420.2.7.1.2.3.1
An entry consisting of Packet loss history result for a specific MEP and remote MEP pair.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmHistResultPktLossEntry  

acdCfmHistResultPktLossID 1.3.6.1.4.1.22420.2.7.1.2.3.1.1
Unique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultPktLossSampleIndex 1.3.6.1.4.1.22420.2.7.1.2.3.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 and increases by one as each new period.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultPktLossStatus 1.3.6.1.4.1.22420.2.7.1.2.3.1.3
Indicates the validity of the packet loss results during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

acdCfmHistResultPktLossDuration 1.3.6.1.4.1.22420.2.7.1.2.3.1.4
The interval in seconds over which the data is sampled for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmHistResultPktLossIntervalEnd 1.3.6.1.4.1.22420.2.7.1.2.3.1.5
This is the time of the end of this entry.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdCfmHistResultPktLossSamples 1.3.6.1.4.1.22420.2.7.1.2.3.1.6
Indicates the number of samples gathered during the sampling interval to calculate packet loss results. This is a 32 bits counter. Combined with the overflow counter it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCSamples.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmHistResultPktLossOverflowSamples 1.3.6.1.4.1.22420.2.7.1.2.3.1.7
The number of times the associated acdCfmHistResultPktLossSamples counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmHistResultPktLossSamples, it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCSamples.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmHistResultPktLossHCSamples 1.3.6.1.4.1.22420.2.7.1.2.3.1.8
Indicates the number of samples gathered during the sampling interval to calculate packet loss results.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmHistResultPktLossNbrLoss 1.3.6.1.4.1.22420.2.7.1.2.3.1.9
The total number of packets loss during this sampling interval. This is a 32 bits counter. Combined with the overflow counter it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrLoss.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmHistResultPktLossOverflowNbrLoss 1.3.6.1.4.1.22420.2.7.1.2.3.1.10
The number of times the associated acdCfmHistResultPktLossNbrLoss counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmHistResultPktLossNbrLoss, it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrLoss.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmHistResultPktLossHCNbrLoss 1.3.6.1.4.1.22420.2.7.1.2.3.1.11
The total number of packets loss during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmHistResultPktLossNbrGaps 1.3.6.1.4.1.22420.2.7.1.2.3.1.12
The total number of gap during this sampling interval. This is a 32 bits counter. Combined with the overflow counter it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrGaps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmHistResultPktLossOverflowNbrGaps 1.3.6.1.4.1.22420.2.7.1.2.3.1.13
The number of times the associated acdCfmHistResultPktLossNbrGaps counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmHistResultPktLossNbrGaps, it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrGaps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmHistResultPktLossHCNbrGaps 1.3.6.1.4.1.22420.2.7.1.2.3.1.14
The total number of gap during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmHistResultPktLossLargestGap 1.3.6.1.4.1.22420.2.7.1.2.3.1.15
the largest gap size in packets during this sampling interval. This is a 32 bits counter. Combined with the overflow counter it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrGaps.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmHistResultPktLossOverflowLargestGap 1.3.6.1.4.1.22420.2.7.1.2.3.1.16
The number of times the associated acdCfmHistResultPktLossLargestGap counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmHistResultPktLossLargestGap, it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCLargestGap.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmHistResultPktLossHCLargestGap 1.3.6.1.4.1.22420.2.7.1.2.3.1.17
the largest gap size in packets during this sampling interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmHistResultPktLossRatio 1.3.6.1.4.1.22420.2.7.1.2.3.1.18
Indicates the packet loss ratio. The packet loss ratio is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000000  

acdCfmSlmCfgTable 1.3.6.1.4.1.22420.2.7.1.5.1
Configuration table of all SLM entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmSlmCfgEntry

acdCfmSlmCfgEntry 1.3.6.1.4.1.22420.2.7.1.5.1.1
An entry consisting of all settings to manage a SLM instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmSlmCfgEntry  

acdCfmSlmCfgID 1.3.6.1.4.1.22420.2.7.1.5.1.1.1
Unique value for each SLM instance. This value follows the ordering the results table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmSlmCfgRowStatus 1.3.6.1.4.1.22420.2.7.1.5.1.1.2
The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

acdCfmSlmCfgMepIdx 1.3.6.1.4.1.22420.2.7.1.5.1.1.3
Maintenance association End Point Identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmSlmCfgRemoteMepId 1.3.6.1.4.1.22420.2.7.1.5.1.1.4
Remote Maintenance association End Point Identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..8191  

acdCfmSlmCfgPriority 1.3.6.1.4.1.22420.2.7.1.5.1.1.5
The VLAN priority. Its value ranges from 0 to 7.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

acdCfmSlmCfgState 1.3.6.1.4.1.22420.2.7.1.5.1.1.6
State of the SLM instance
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmSlmCfgInterval 1.3.6.1.4.1.22420.2.7.1.5.1.1.7
Interval in milliseconds at which CFM issues Synthetic Loss Measurement packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..10000  

acdCfmSlmCfgRefPeriod 1.3.6.1.4.1.22420.2.7.1.5.1.1.8
Reference period in minutes for Synthetic Loss Measurement.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1440  

acdCfmSlmCfgNearEndThresh 1.3.6.1.4.1.22420.2.7.1.5.1.1.9
Near end packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000000  

acdCfmSlmCfgFarEndThresh 1.3.6.1.4.1.22420.2.7.1.5.1.1.10
Far end packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000000  

acdCfmSlmCfgName 1.3.6.1.4.1.22420.2.7.1.5.1.1.11
The name of the instance
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

acdCfmSlmResultTable 1.3.6.1.4.1.22420.2.7.1.5.2
SLM result table of a MEP and remote MEP pair.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmSlmResultEntry

acdCfmSlmResultEntry 1.3.6.1.4.1.22420.2.7.1.5.2.1
An entry consisting of SLM result for a specific MEP and remote MEP pair.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmSlmResultEntry  

acdCfmSlmResultID 1.3.6.1.4.1.22420.2.7.1.5.2.1.1
Unique value for each SLM instance. This value follows the ordering of the SLM table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmSlmResultPeriodIndex 1.3.6.1.4.1.22420.2.7.1.5.2.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 and increases by one as each new period.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmSlmResultIntervalStart 1.3.6.1.4.1.22420.2.7.1.5.2.1.3
This is the time of the start of the period.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdCfmSlmResultValid 1.3.6.1.4.1.22420.2.7.1.5.2.1.4
Reserved for future use.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmSlmResultNearEndAlert 1.3.6.1.4.1.22420.2.7.1.5.2.1.5
Indicate the presence of the SLM near end alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmSlmResultFarEndAlert 1.3.6.1.4.1.22420.2.7.1.5.2.1.6
Indicate the presence of the SLM far end alert.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

acdCfmSlmResultTxSlm 1.3.6.1.4.1.22420.2.7.1.5.2.1.7
Indicates the number of SLM frames sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmSlmResultRxSlr 1.3.6.1.4.1.22420.2.7.1.5.2.1.8
Indicates the number of SLR frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmSlmResultRemoteRxSlm 1.3.6.1.4.1.22420.2.7.1.5.2.1.9
Indicates the number of SLM frames received at the far end.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmSlmResultNearEndNbrLoss 1.3.6.1.4.1.22420.2.7.1.5.2.1.10
This is the number of packets lost at the near end.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmSlmResultFarEndNbrLoss 1.3.6.1.4.1.22420.2.7.1.5.2.1.11
This is the number of packets lost at the far end.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmSlmResultNearEndRatio 1.3.6.1.4.1.22420.2.7.1.5.2.1.12
This is the packet loss ratio at the near end.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

acdCfmSlmResultFarEndRatio 1.3.6.1.4.1.22420.2.7.1.5.2.1.13
This is the packet loss ratio at the far end.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

acdCfmSlmResultNbrGaps 1.3.6.1.4.1.22420.2.7.1.5.2.1.14
This is the number of gap.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmSlmResultLargestGap 1.3.6.1.4.1.22420.2.7.1.5.2.1.15
This is the largest gap.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmSlmHistResultTable 1.3.6.1.4.1.22420.2.7.1.5.3
SLM history result table of a MEP and remote MEP pair.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmSlmHistResultEntry

acdCfmSlmHistResultEntry 1.3.6.1.4.1.22420.2.7.1.5.3.1
An entry consisting of SLM history result for a specific MEP and remote MEP pair.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmSlmHistResultEntry  

acdCfmSlmHistResultID 1.3.6.1.4.1.22420.2.7.1.5.3.1.1
Unique value for each SLM instance. This value follows the ordering of the SLM table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmSlmHistResultPeriodIndex 1.3.6.1.4.1.22420.2.7.1.5.3.1.2
An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 and increases by one as each new period.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmSlmHistResultIntervalEnd 1.3.6.1.4.1.22420.2.7.1.5.3.1.3
This is the time of the end of the period.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acdCfmSlmHistResultTxSlm 1.3.6.1.4.1.22420.2.7.1.5.3.1.4
Indicates the number of SLM frames sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmSlmHistResultRxSlr 1.3.6.1.4.1.22420.2.7.1.5.3.1.5
Indicates the number of SLR frames received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmSlmHistResultRemoteRxSlm 1.3.6.1.4.1.22420.2.7.1.5.3.1.6
Indicates the number of SLM frames received at the far end.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmSlmHistResultNearEndRatio 1.3.6.1.4.1.22420.2.7.1.5.3.1.7
This is the packet loss ratio at the near end.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

acdCfmSlmHistResultFarEndRatio 1.3.6.1.4.1.22420.2.7.1.5.3.1.8
This is the packet loss ratio at the far end.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

acdCfmSlmHistResultNbrGaps 1.3.6.1.4.1.22420.2.7.1.5.3.1.9
This is the number of gap.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmSlmHistResultLargestGap 1.3.6.1.4.1.22420.2.7.1.5.3.1.10
This is the largest gap.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

acdCfmSlmHistResultInstanceIndex 1.3.6.1.4.1.22420.2.7.1.5.3.1.11
The instance index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmMepStatsTxTable 1.3.6.1.4.1.22420.2.7.1.3.2
Transmit Statictics table of all MEP entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmMepStatsTxEntry

acdCfmMepStatsTxEntry 1.3.6.1.4.1.22420.2.7.1.3.2.1
An entry consisting of all transmit statistics related to a MEP entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmMepStatsTxEntry  

acdCfmMepStatsTxID 1.3.6.1.4.1.22420.2.7.1.3.2.1.1
Unique value for each MEP instance. This value follows the ordering of the MEP table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmMepStatsTxCcmPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.2
This is a count of the total number of Continuity Check Message (CCM) PDU transmitted by the MEP (OpCode 1).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxLbmPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.3
This is a count of the total number of LoopBack Message (LBM) PDU transmitted by the MEP (OpCode 3).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxLbrPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.4
This is a count of the total number of LoopBack Reply (LBR) PDU transmitted by the MEP (OpCode 2).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxLtmPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.5
This is a count of the total number of Link Trace Message (LTM) PDU transmitted by the MEP (OpCode 5).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxLtrPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.6
This is a count of the total number of Link Trace Reply (LTR) PDU transmitted by the MEP (OpCode 4).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxAisPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.7
This is a count of the total number of Alarm Indication Signal (AIS) PDU transmitted by the MEP (OpCode 33).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxLckPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.8
This is a count of the total number of Locked (LCK) PDU transmitted by the MEP (OpCode 35).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxTstPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.9
This is a count of the total number of Test (TST) PDU transmitted by the MEP (OpCode 37).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxLinearApsPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.10
This is a count of the total number of linear Automatic Protection Switching (APS) PDU transmitted by the MEP (OpCode 39).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxRingApsPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.11
This is a count of the total number of ring Automatic Protection Switching (APS) PDU transmitted by the MEP (OpCode 40).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxMccPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.12
This is a count of the total number of Maintenance Communication Channel (MCC) PDU transmitted by the MEP (OpCode 41).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxLmmPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.13
This is a count of the total number of Loss Measurement Message (LMM) PDU transmitted by the MEP (OpCode 43).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxLmrPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.14
This is a count of the total number of Loss Measurement Reply (LMR) PDU transmitted by the MEP (OpCode 42).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTx1dmPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.15
This is a count of the total number of One-way Delay Measurement (1DM) PDU transmitted by the MEP (OpCode 45).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxDmmPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.16
This is a count of the total number of Delay Measurement Message (DMM) PDU transmitted by the MEP (OpCode 47).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxDmrPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.17
This is a count of the total number of Delay Measurement Reply (DMR) PDU transmitted by the MEP (OpCode 46).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxExmPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.18
This is a count of the total number of EXperimental Message (EXM) PDU transmitted by the MEP (OpCode 49).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxExrPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.19
This is a count of the total number of EXperimental Reply (EXR) PDU transmitted by the MEP (OpCode 48).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxVsmPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.20
This is a count of the total number of Vendor Specific Message (VSM) PDU transmitted by the MEP (OpCode 51).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxVsrPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.21
This is a count of the total number of Vendor Specific Reply (VSR) PDU transmitted by the MEP (OpCode 50).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxCsfPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.22
This is a count of the total number of Client Signal Fail (CSF) PDU transmitted by the MEP (OpCode 52).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxSlmPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.23
This is a count of the total number of Synthetic Loss Message (SLM) PDU transmitted by the MEP (OpCode 55).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsTxSlrPdu 1.3.6.1.4.1.22420.2.7.1.3.2.1.24
This is a count of the total number of Synthetic Loss Reply (SLR) PDU transmitted by the MEP (OpCode 54).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxTable 1.3.6.1.4.1.22420.2.7.1.3.3
Receive Statictics table of all MEP entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmMepStatsRxEntry

acdCfmMepStatsRxEntry 1.3.6.1.4.1.22420.2.7.1.3.3.1
An entry consisting of all receive statistics related to a MEP entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmMepStatsRxEntry  

acdCfmMepStatsRxID 1.3.6.1.4.1.22420.2.7.1.3.3.1.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmMepStatsRxCcmPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.2
This is a count of the total number of Continuity Check Message (CCM) PDU received by the MEP (OpCode 1).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxLbmPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.3
This is a count of the total number of LoopBack Message (LBM) PDU received by the MEP (OpCode 3).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxLbrPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.4
This is a count of the total number of LoopBack Reply (LBR) PDU received by the MEP (OpCode 2).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxLtmPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.5
This is a count of the total number of Link Trace Message (LTM) PDU received by the MEP (OpCode 5).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxLtrPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.6
This is a count of the total number of Link Trace Reply (LTR) PDU received by the MEP (OpCode 4).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxAisPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.7
This is a count of the total number of Alarm Indication Signal (AIS) PDU received by the MEP (OpCode 33).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxLckPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.8
This is a count of the total number of Locked (LCK) PDU received by the MEP (OpCode 35).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxTstPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.9
This is a count of the total number of Test (TST) PDU received by the MEP (OpCode 37).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxLinearApsPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.10
This is a count of the total number of linear Automatic Protection Switching (APS) PDU received by the MEP (OpCode 39).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxRingApsPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.11
This is a count of the total number of ring Automatic Protection Switching (APS) PDU received by the MEP (OpCode 40).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxMccPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.12
This is a count of the total number of Maintenance Communication Channel (MCC) PDU received by the MEP (OpCode 41).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxLmmPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.13
This is a count of the total number of Loss Measurement Message (LMM) PDU received by the MEP (OpCode 43).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxLmrPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.14
This is a count of the total number of Loss Measurement Reply (LMR) PDU received by the MEP (OpCode 42).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRx1dmPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.15
This is a count of the total number of One-way Delay Measurement (1DM) PDU received by the MEP (OpCode 45).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxDmmPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.16
This is a count of the total number of Delay Measurement Message (DMM) PDU received by the MEP (OpCode 47).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxDmrPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.17
This is a count of the total number of Delay Measurement Reply (DMR) PDU received by the MEP (OpCode 46).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxExmPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.18
This is a count of the total number of EXperimental Message (EXM) PDU received by the MEP (OpCode 49).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxExrPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.19
This is a count of the total number of EXperimental Reply (EXR) PDU received by the MEP (OpCode 48).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxVsmPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.20
This is a count of the total number of Vendor Specific Message (VSM) PDU received by the MEP (OpCode 51).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxVsrPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.21
This is a count of the total number of Vendor Specific Reply (VSR) PDU received by the MEP (OpCode 50).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxCcmSeqErrors 1.3.6.1.4.1.22420.2.7.1.3.3.1.22
The total number of out-of-sequence CCMs received from all remote MEPs.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxLtrUnexpectedPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.23
The total number of LTRs received when no linktrace request is active for that MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxLtrMacErrors 1.3.6.1.4.1.22420.2.7.1.3.3.1.24
The total number of Link Trace Replies dropped because of bad MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxLbrOooErrors 1.3.6.1.4.1.22420.2.7.1.3.3.1.25
The total number of valid, out-of-order Loopback Replies received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxLbrUnexpectedPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.26
The total number of LBRs received when no loopback request is active for that MEP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxLbrDataErrors 1.3.6.1.4.1.22420.2.7.1.3.3.1.27
The total number of LBRs received whose MACService Data Unit did not match (except for the OpCode) that of the corresponding LBM.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxCsfPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.28
This is a count of the total number of Client Signal Fail (CSF) PDU received by the MEP (OpCode 52).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxSlmPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.29
This is a count of the total number of Synthetic Loss Message (SLM) PDU received by the MEP (OpCode 55).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepStatsRxSlrPdu 1.3.6.1.4.1.22420.2.7.1.3.3.1.30
This is a count of the total number of Synthetic Loss Reply (SLR) PDU received by the MEP (OpCode 54).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepDmStatsTable 1.3.6.1.4.1.22420.2.7.1.3.4
Transmit DMM/DMR statictics per priority table for a MEP entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmMepDmStatsEntry

acdCfmMepDmStatsEntry 1.3.6.1.4.1.22420.2.7.1.3.4.1
An entry consisting of all DMM/DMR statistics related to a MEP entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmMepDmStatsEntry  

acdCfmMepDmStatsID 1.3.6.1.4.1.22420.2.7.1.3.4.1.1
Unique value for each MEP instance. This value follows the ordering of the MEP table. Same as acdCfmMepStatsTxID and acdCfmMepStatsRxID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmMepDmStatsPriority 1.3.6.1.4.1.22420.2.7.1.3.4.1.2
Unique value for each priority level.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmMepDmStatsTxDmmPdu 1.3.6.1.4.1.22420.2.7.1.3.4.1.3
This is a count of the total number of Delay Measurement Message (DMM) (OpCode 47) PDU transmitted by the MEP for this specific priority level.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepDmStatsRxDmmPdu 1.3.6.1.4.1.22420.2.7.1.3.4.1.4
This is a count of the total number of Delay Measurement Message (DMM) (OpCode 47) PDU received by the MEP for this specific priority level.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepDmStatsTxDmrPdu 1.3.6.1.4.1.22420.2.7.1.3.4.1.5
This is a count of the total number of Delay Measurement Reply (DMR) (OpCode 46) PDU transmitted by the MEP for this specific priority level.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmMepDmStatsRxDmrPdu 1.3.6.1.4.1.22420.2.7.1.3.4.1.6
This is a count of the total number of Delay Measurement Reply (DMR) (OpCode 46) PDU received by the MEP for this specific priority level.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acdCfmStackTable 1.3.6.1.4.1.22420.2.7.1.4.1
Configuration table of stack entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcdCfmStackEntry

acdCfmStackEntry 1.3.6.1.4.1.22420.2.7.1.4.1.1
An entry consisting of all informations to tie together.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcdCfmStackEntry  

acdCfmMdIdx 1.3.6.1.4.1.22420.2.7.1.4.1.1.1
Maintenance Domain(MD) index from table dot1agCfmMepTable in IEEE8021-CFM-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmMaIdx 1.3.6.1.4.1.22420.2.7.1.4.1.1.2
Maintenance Association(MA) index from table dot1agCfmMepTable in IEEE8021-CFM-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

acdCfmMepID 1.3.6.1.4.1.22420.2.7.1.4.1.1.3
Maintenance End Point(Mep) index from table dot1agCfmMepTable in IEEE8021-CFM-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..8191  

acdCfmMepIdx 1.3.6.1.4.1.22420.2.7.1.4.1.1.4
Maintenance End Point(Mep) index from table acdCfmDmCfgTable in ACD-CFM-MIB.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

acdCfmCompliances 1.3.6.1.4.1.22420.2.7.2.1
OBJECT IDENTIFIER    

acdCfmGroups 1.3.6.1.4.1.22420.2.7.2.2
OBJECT IDENTIFIER    

acdCfmDmCfgGroup 1.3.6.1.4.1.22420.2.7.2.2.1
Objects for the Delay Measurement configuration Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmResultOneWayDelayGroup 1.3.6.1.4.1.22420.2.7.2.2.2
Objects for the One Way Delay result Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmResultOneWayDvGroup 1.3.6.1.4.1.22420.2.7.2.2.3
Objects for the One Way Delay variation result Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmResultTwoWayDelayGroup 1.3.6.1.4.1.22420.2.7.2.2.4
Objects for the Two Way Delay result Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmResultTwoWayDvGroup 1.3.6.1.4.1.22420.2.7.2.2.5
Objects for the Two Way Delay varition result Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmHistResultOneWayDelayGroup 1.3.6.1.4.1.22420.2.7.2.2.6
Objects for the One Way Delay history result Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmHistResultOneWayDvGroup 1.3.6.1.4.1.22420.2.7.2.2.7
Objects for the One Way Delay variation history result Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmHistResultTwoWayDelayGroup 1.3.6.1.4.1.22420.2.7.2.2.8
Objects for the Two Way Delay history result Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmHistResultTwoWayDvGroup 1.3.6.1.4.1.22420.2.7.2.2.9
Objects for the Two Way Delay variation history result Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmPktLossCfgGroup 1.3.6.1.4.1.22420.2.7.2.2.10
Objects for Packet loss configuration Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmResultPktLossGroup 1.3.6.1.4.1.22420.2.7.2.2.11
Objects for Packet loss result Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmHistResultPktLossGroup 1.3.6.1.4.1.22420.2.7.2.2.12
Objects for Packet loss history result Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmMepStatsTxGroup 1.3.6.1.4.1.22420.2.7.2.2.13
Objects for MEP transmit statistics Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmMepStatsRxGroup 1.3.6.1.4.1.22420.2.7.2.2.14
Objects for MEP receive statistics Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmMepDmStatsGroup 1.3.6.1.4.1.22420.2.7.2.2.15
Objects for DMM/DMR MEP statistics Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmMepStackGroup 1.3.6.1.4.1.22420.2.7.2.2.16
Objects for cfm Stack Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmMepSlmStatsGroup 1.3.6.1.4.1.22420.2.7.2.2.17
Objects for SLM/SLR MEP statistics Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmSlmCfgGroup 1.3.6.1.4.1.22420.2.7.2.2.18
Objects for SLM configuration Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmSlmResultGroup 1.3.6.1.4.1.22420.2.7.2.2.19
Objects for SLM result Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmSlmHistResultGroup 1.3.6.1.4.1.22420.2.7.2.2.20
Objects for SLM history result Group.
Status: current Access: read-only
OBJECT-GROUP    

acdCfmCompliance 1.3.6.1.4.1.22420.2.7.2.1.1
The compliance statement for support of the ACD-CFM-MIB module.
Status: current Access: read-only
MODULE-COMPLIANCE