ADSL-MIB
File:
ADSL-MIB.mib (8138 bytes)
Imported modules
Imported symbols
Defined Values
usrAdsl |
1.3.6.1.4.1.429.4.26 |
The commWorks enterprise defined MIB objects for ADSL |
MODULE-IDENTITY |
|
|
|
usrAdslXmitPower |
1.3.6.1.4.1.429.4.26.1 |
Transmit power of ADSL transceiver represented in dB. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-15..-3 |
|
usrAdslActualDwnConstStatus |
1.3.6.1.4.1.429.4.26.3 |
Value corresponds to the actual downstream constellation
that was used, which may differ from the value requested. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..128 |
|
usrAdslActualUpConstStatus |
1.3.6.1.4.1.429.4.26.5 |
Value corresponds to the actual upstream constellation that
was used, which may differ from the value requested. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..128 |
|
usrAdslFwRel |
1.3.6.1.4.1.429.4.26.6 |
Firmware release number of the GTI supplied transceiver
software module. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..16777215 |
|
usrAdslStartletVerson |
1.3.6.1.4.1.429.4.26.7 |
Value is a number that corresponds to the version number of
the STARLET VLSI in the transceiver. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..4 |
|
usrAdslMeanSqError |
1.3.6.1.4.1.429.4.26.8 |
Received signal to noise ratio. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
minus50db(1), plus50db(2) |
|
usrAdslBytesErrCorrected |
1.3.6.1.4.1.429.4.26.11 |
Number of bytes corrected by Reed-Solomon error correction
algorithm in the STARLET. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
usrAdslBytesNotErrCorrected |
1.3.6.1.4.1.429.4.26.12 |
Number of bytes not corrected by Reed-Solomon error correction
algorithm in the STARLET. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
usrAdslOverflowCounter |
1.3.6.1.4.1.429.4.26.13 |
Running counter for when usrAdslBytesErrorCorrected or
usrAdslBytesNotErrorCorrected overflows |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
usrAdslOpState |
1.3.6.1.4.1.429.4.26.14 |
Defines the high level operating state of the transceiver.
Used by the customer to determine whether the transceiver
is in idle mode, data mode, test mode, or startup. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..134 |
|
usrAdslStartupProgress |
1.3.6.1.4.1.429.4.26.15 |
Defines the current detailed startup state of the
transceiver. The LSB determines the major mode
corresponding to startup in var usrAdslOpState. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..191 |
|
usrAdslLastFailedStatus |
1.3.6.1.4.1.429.4.26.16 |
Defines the last detailed state reached in
usrAdslStartupProgress before startup failed. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..191 |
|
usrAdslCFMStatusFlag |
1.3.6.1.4.1.429.4.26.21 |
This variable controls saving and loading of configuration
information for the D56k WAN Driver. The value can be set
to either save or load by a management station. The other
values indicate if any configuration operation and what type
is in progress. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
UsrConfigStatus |
|
|
usrAdslCfgFileName |
1.3.6.1.4.1.429.4.26.22 |
The name of a ConfigFile to read/write the D56k parameters.
If the value of this object is an empty string, then the
D56k Driver uses the default name `@file://D56k.cfg'. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
usrAdslResetStatus |
1.3.6.1.4.1.429.4.26.23 |
The Reset Status of the ADSL Starlet chipset |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|