ADTRAN-AOS-3G
File:
ADTRAN-AOS-3G.mib (24543 bytes)
Imported modules
Imported symbols
Defined Types
| AdGenAOS3GEntry |
|
| SEQUENCE |
|
|
|
| |
adGenAOS3GNetworkAccessID |
DisplayString |
|
| |
adGenAOS3GHASS |
BITS |
|
| |
adGenAOS3GHASPI |
Unsigned32 |
|
| |
adGenAOS3GAAASS |
BITS |
|
| |
adGenAOS3GAAASPI |
Unsigned32 |
|
| |
adGenAOS3GReverseTunneling |
BITS |
|
| |
adGenAOS3GHomeAddress |
IpAddress |
|
| |
adGenAOS3GPrimaryHomeAddress |
IpAddress |
|
| |
adGenAOS3GSecHomeAddress |
IpAddress |
|
| |
adGenAOS3GRSSI |
Integer32 |
|
| |
adGenAOS3GECIO |
DisplayString |
|
| |
adGenAOS3GPnOffset |
Integer32 |
|
| |
adGenAOS3GServiceType |
DisplayString |
|
| |
adGenAOS3GServiceTypePreference |
INTEGER |
|
| |
adGenAOS3GConnectionState |
DisplayString |
|
| |
adGenAOS3GECIOIntegerValue |
Integer32 |
|
| AdGenAOS3GHardwareDataEntry |
|
| SEQUENCE |
|
|
|
| |
adGenAOS3GSystemID |
Unsigned32 |
|
| |
adGenAOS3GNetworkID |
DisplayString |
|
| |
adGenAOS3GPrefferedRoamList |
Unsigned32 |
|
| |
adGenAOS3GMobileDirNumber |
DisplayString |
|
| |
adGenAOS3GESN |
DisplayString |
|
| |
adGenAOS3GMobileStationID |
DisplayString |
|
| |
adGenAOS3GHardwareVersion |
DisplayString |
|
| |
adGenAOS3GFirmwareVersion |
DisplayString |
|
| AdGenAOS3GThresholdDataEntry |
|
| SEQUENCE |
|
|
|
| |
adGenAOS3GEnableTraps |
INTEGER |
|
| |
adGenAOS3GRSSIThreshold |
Integer32 |
|
| |
adGenAOS3GECIOThreshold |
Integer32 |
|
Defined Values
| adGenAOS3GMib |
1.3.6.1.4.1.664.6.10000.53.6.2 |
| A MIB module for monitoring 3G module values. |
| MODULE-IDENTITY |
|
|
|
| adGenAOS3G |
1.3.6.1.4.1.664.5.53.6.2 |
| OBJECT IDENTIFIER |
|
|
|
| adGenAOS3GTraps |
1.3.6.1.4.1.664.5.53.6.2.0 |
| The table contains traps/alarms caused by changes in
configuration values and when statistical data reach
certain thresholds. |
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| adGenAOS3GTable |
1.3.6.1.4.1.664.5.53.6.2.1 |
| The table contains 3G cellular statistical data for the cellular
interface. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
AdGenAOS3GEntry |
|
| adGenAOS3GEntry |
1.3.6.1.4.1.664.5.53.6.2.1.1 |
| This is an entry into the 3G table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AdGenAOS3GEntry |
|
|
| adGenAOS3GNetworkAccessID |
1.3.6.1.4.1.664.5.53.6.2.1.1.1 |
| The Network Access ID is the User ID submitted by the 3G
Modem during Mobile IP authentication. For more information,
refer to RFC 4282. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| adGenAOS3GHASS |
1.3.6.1.4.1.664.5.53.6.2.1.1.2 |
| This OID displays whether the shared secret for the home
agent has been set for Mobile IP authentication. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
BITS |
unset(0), set(1) |
|
| adGenAOS3GHASPI |
1.3.6.1.4.1.664.5.53.6.2.1.1.3 |
| The Home Agent Security Parameter Index uniquely identifies a
security association for the home agent for use during Mobile
IP authentication. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| adGenAOS3GAAASS |
1.3.6.1.4.1.664.5.53.6.2.1.1.4 |
| This OID displays whether the shared secret for AAA
has been set for Mobile IP authentication. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
BITS |
unset(0), set(1) |
|
| adGenAOS3GAAASPI |
1.3.6.1.4.1.664.5.53.6.2.1.1.5 |
| The AAA Security Parameter Index uniquely identifies a
security association for AAA for use during Mobile IP
authentication. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| adGenAOS3GReverseTunneling |
1.3.6.1.4.1.664.5.53.6.2.1.1.6 |
| This OID describes if a tunnel is setup from the
3G module's care of address to the home agent. A care of
address is a temporary IP address for a mobile device. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
BITS |
unset(0), set(1) |
|
| adGenAOS3GHomeAddress |
1.3.6.1.4.1.664.5.53.6.2.1.1.7 |
| The permanent home IP address for the 3G
module in the cellular network. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| adGenAOS3GSecHomeAddress |
1.3.6.1.4.1.664.5.53.6.2.1.1.9 |
| The secondary IP address of the 3G module's home agent. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| adGenAOS3GECIO |
1.3.6.1.4.1.664.5.53.6.2.1.1.11 |
| The Ec/Io for the cellular connection. This is the ratio of
received pilot energy to the total received energy. The value
is similar to signal-to-noise ratio. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| adGenAOS3GPnOffset |
1.3.6.1.4.1.664.5.53.6.2.1.1.12 |
| The Pn Offset for the cellular connection. Base stations
assigned to a particular frequency carrier operate at the same
center frequency. The PN offset is used to distinguish base
stations from one another. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| adGenAOS3GServiceType |
1.3.6.1.4.1.664.5.53.6.2.1.1.13 |
| The current Cellular Service Type for
the cellular connection. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| adGenAOS3GServiceTypePreference |
1.3.6.1.4.1.664.5.53.6.2.1.1.14 |
| The current Cellular Service Type Preference for the cellular
connection. Cellular Service Type can be forced to 1xRTT mode
or 1xEVDO mode. By default, it is set to Hybrid or AUTO mode
which chooses the best available signal. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
modeAUTO(4), mode1xRTT(9), mode1xEVDO(10) |
|
| adGenAOS3GECIOIntegerValue |
1.3.6.1.4.1.664.5.53.6.2.1.1.16 |
| The Ec/Io for the cellular connection displayed in integer
form. This is the ratio of received pilot energy to the total
received energy. The value is similar to signal-to-noise ratio.
EC/IO values typically are represented as a value with a
decimal place. In this representation the value will be
scaled by 10. Hence a value of 1.5 will be represented as 15. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| adGenAOS3GHardwareDataEntry |
1.3.6.1.4.1.664.5.53.6.2.2.1 |
| This is an entry into the 3G hardware data table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AdGenAOS3GHardwareDataEntry |
|
|
| adGenAOS3GSystemID |
1.3.6.1.4.1.664.5.53.6.2.2.1.1 |
| The System Identification number is the identifier
for a cellular network in a certain area. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| adGenAOS3GNetworkID |
1.3.6.1.4.1.664.5.53.6.2.2.1.2 |
| The Network Identification number identifies a subset
of a particular SID corresponding to different networks. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| adGenAOS3GPrefferedRoamList |
1.3.6.1.4.1.664.5.53.6.2.2.1.3 |
| The PRL is a database of cell towers that the cellular modem
can roam on. This OID specifies the current version of
that database that is programmed onto the cellular modem. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| adGenAOS3GESN |
1.3.6.1.4.1.664.5.53.6.2.2.1.5 |
| The Electronic Serial Number is is a unique
number that identifies the 3G module. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| adGenAOS3GMobileStationID |
1.3.6.1.4.1.664.5.53.6.2.2.1.6 |
| The MSID is a 10 digit number that identifies
the 3G module in the network. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| adGenAOS3GThresholdDataEntry |
1.3.6.1.4.1.664.5.53.6.2.3.1 |
| This is an entry into the 3G threshold data table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AdGenAOS3GThresholdDataEntry |
|
|
| adGenAOS3GEnableTraps |
1.3.6.1.4.1.664.5.53.6.2.3.1.1 |
| This OID indicates whether traps
are enabled for the interface. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
enabled(1), disabled(2) |
|
| adGenAOS3GECIOThreshold |
1.3.6.1.4.1.664.5.53.6.2.3.1.3 |
| This is a value from (-200..200) that sets the threshold for
an ECIO trap to occur. When the ECIO is below this value, it
will cause an ECIO alarm trap. When the ECIO rises above this
value, it will cause an ECIO cleared trap. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
-200..200 |
|
| ecioDataRangeAlarm |
1.3.6.1.4.1.664.5.53.6.2.0.2 |
| This trap signifies that the SNMP entity, acting in
an agent role, has detected that the ECIO data value object for
the 3G cellular interface has exceeded the range specified by the
user. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| ecioDataRangeClear |
1.3.6.1.4.1.664.5.53.6.2.0.4 |
| This trap signifies that the SNMP entity, acting in
an agent role, has detected that the ECIO data value object for
the 3G cellular interface has returned to the range specified by
the user. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| configValueSet |
1.3.6.1.4.1.664.5.53.6.2.0.5 |
| This trap signifies that the SNMP entity, acting in
an agent role, has detected that a data value object for the 3G
cellular interface from the 3G Hardware Table has been modified
from the previous state. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| modemResetAlarm |
1.3.6.1.4.1.664.5.53.6.2.0.6 |
| This trap signifies that the SNMP entity, acting in
an agent role, has detected that the 3G modem has been reset. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| serviceTypeChangeAlarm |
1.3.6.1.4.1.664.5.53.6.2.0.7 |
| This trap signifies that the SNMP entity, acting
in an agent role, has detected that the service type for the 3G
cellular interface has changed. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| connectionStateDownAlarm |
1.3.6.1.4.1.664.5.53.6.2.0.8 |
| This trap signifies that the SNMP entity, acting
in an agent role, has detected that the connection status of the
modem has gone down from either DORMANT or a CONNECTED state. |
| Status: current |
Access: read-write |
| NOTIFICATION-TYPE |
|
|
|
| adGenAOS3GFullCompliance |
1.3.6.1.4.1.664.5.53.99.9.2.1 |
| The compliance statement for SNMP entities which implement
version 2 of the adGenAOS3G MIB. |
| Status: current |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| adGenAOS3GTableGroup |
1.3.6.1.4.1.664.5.53.99.9.1.1 |
| This group contains 3G cellular statistical data for profile
information. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| adGenAOS3GHardwareDataGroup |
1.3.6.1.4.1.664.5.53.99.9.1.2 |
| This group contains 3G cellular statistical data for hardware
information. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| adGenAOS3GThresholdDataGroup |
1.3.6.1.4.1.664.5.53.99.9.1.3 |
| This group contains threshold data for enabling 3G interface
thresholds. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| adGenAOS3GTrapGroup |
1.3.6.1.4.1.664.5.53.99.9.1.4 |
| Traps which may be used to enhance event driven
management of the interface. |
| Status: current |
Access: read-write |
| NOTIFICATION-GROUP |
|
|
|