ADTRAN-AOS-MUX-MIB

File: ADTRAN-AOS-MUX-MIB.mib (14953 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
ADTRAN-MIB ADTRAN-AOS

Imported symbols

OBJECT-TYPE MODULE-IDENTITY RowStatus
MODULE-COMPLIANCE OBJECT-GROUP adIdentity
adGenAOSCommon adGenAOSConformance

Defined Types

AdGenAOSXConnectEntry  
SEQUENCE    
  adGenAOSXConnectIndex INTEGER
  adGenAOSXConnectFirstIfType INTEGER
  adGenAOSXConnectFirstIfNumber INTEGER
  adGenAOSXConnectFirstSubIfNumber INTEGER
  adGenAOSXConnectFirstIfSlot INTEGER
  adGenAOSXConnectFirstIfPort INTEGER
  adGenAOSXConnectFirstTdmGroup INTEGER
  adGenAOSXConnectFirstTdmGroupDS0 INTEGER
  adGenAOSXConnectSecondIfType INTEGER
  adGenAOSXConnectSecondIfNumber INTEGER
  adGenAOSXConnectSecondSubIfNumber INTEGER
  adGenAOSXConnectSecondIfSlot INTEGER
  adGenAOSXConnectSecondIfPort INTEGER
  adGenAOSXConnectSecondTdmGroup INTEGER
  adGenAOSXConnectSecondTdmGroupDS0 INTEGER
  adGenAOSXConnectPreserveRbs INTEGER
  adGenAOSXConnectRowStatus RowStatus

AdGenAOSTdmGroupEntry  
SEQUENCE    
  adGenAOSTdmGroupIfSlot INTEGER
  adGenAOSTdmGroupIfPort INTEGER
  adGenAOSTdmGroupID INTEGER
  adGenAOSTdmGroupMask INTEGER
  adGenAOSTdmGroupUsage INTEGER

Defined Values

adGenAOSMuxID 1.3.6.1.4.1.664.6.10000.53.1.5
The MIB module for the management of AOS products with TDM multiplexing and/or cross-connects.
MODULE-IDENTITY    

adGenAOSMux 1.3.6.1.4.1.664.5.53.1.5
OBJECT IDENTIFIER    

adGenAOSXConnect 1.3.6.1.4.1.664.5.53.1.5.1
OBJECT IDENTIFIER    

adGenAOSTdmGroup 1.3.6.1.4.1.664.5.53.1.5.2
OBJECT IDENTIFIER    

adGenAOSMuxConformance 1.3.6.1.4.1.664.5.53.1.5.99
OBJECT IDENTIFIER    

adGenAOSMuxCompliance 1.3.6.1.4.1.664.5.53.1.5.99.1
OBJECT IDENTIFIER    

adGenAOSMuxMibGroups 1.3.6.1.4.1.664.5.53.1.5.99.2
OBJECT IDENTIFIER    

adGenAOSXConnectTable 1.3.6.1.4.1.664.5.53.1.5.1.1
The Cross-Connect Configuration Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdGenAOSXConnectEntry

adGenAOSXConnectEntry 1.3.6.1.4.1.664.5.53.1.5.1.1.1
An entry in the Cross-Connect Configuration Table
Status: current Access: not-accessible
OBJECT-TYPE    
  AdGenAOSXConnectEntry  

adGenAOSXConnectIndex 1.3.6.1.4.1.664.5.53.1.5.1.1.1.1
A number that uniquely defines the cross-connect
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..1024  

adGenAOSXConnectFirstIfType 1.3.6.1.4.1.664.5.53.1.5.1.1.1.2
The type of interface from which a cross-connect is being made
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notAssigned(0), dds(1), t1E1(2), eth(3), serial(4), shdsl(5), fxs(6), frameRelay(7), ppp(8)  

adGenAOSXConnectFirstIfNumber 1.3.6.1.4.1.664.5.53.1.5.1.1.1.3
A number that defines the interface described by adGenAOSXConnectFirstIfType -- set to 0 if the interface can be defined by adGenAOSXConnectFirstIfSlot and adGenAOSXConnectFirstIfPort
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1024  

adGenAOSXConnectFirstSubIfNumber 1.3.6.1.4.1.664.5.53.1.5.1.1.1.4
A number that further defines some interfaces -- set to 0 if the interface can be defined by adGenAOSXConnectFirstIfSlot and adGenAOSXConnectFirstIfPort
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1007  

adGenAOSXConnectFirstIfSlot 1.3.6.1.4.1.664.5.53.1.5.1.1.1.5
The slot number containing the interface described by adGenAOSXConnectFirstIfType -- set to 0 if the interface can be defined by adGenAOSXConnectFirstIfNumber (and adGenAOSXConnectFirstSubIfNumber) Note: 0 is also a valid slot number.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..96  

adGenAOSXConnectFirstIfPort 1.3.6.1.4.1.664.5.53.1.5.1.1.1.6
The port number of the interface described by adGenAOSXConnectFirstIfType -- set to 0 if the interface can be defined by adGenAOSXConnectFirstIfNumber (and adGenAOSXConnectFirstSubIfNumber)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..48  

adGenAOSXConnectFirstTdmGroup 1.3.6.1.4.1.664.5.53.1.5.1.1.1.7
A number uniquely identifying the TDM Group associated with the interface described by adGenAOSXConnectFirstIfType -- set to 0 if it is not necessary that a TDM Group be associated with the interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

adGenAOSXConnectFirstTdmGroupDS0 1.3.6.1.4.1.664.5.53.1.5.1.1.1.8
The specific DS0 of the TDM Group, described by adGenAOSXConnectFirstTdmGroup, from which a cross- connect is being made -- set to 0 if it is not necessary that a specific timeslot be defined
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..32  

adGenAOSXConnectSecondIfType 1.3.6.1.4.1.664.5.53.1.5.1.1.1.9
The type of interface to which a cross-connect is being made
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notAssigned(0), dds(1), t1E1(2), eth(3), serial(4), shdsl(5), fxs(6), frameRelay(7), ppp(8)  

adGenAOSXConnectSecondIfNumber 1.3.6.1.4.1.664.5.53.1.5.1.1.1.10
A number that defines the interface described by adGenAOSXConnectSecondIfType -- set to 0 if the interface can be defined by adGenAOSXConnectSecondIfSlot and adGenAOSXConnectSecondIfPort
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1024  

adGenAOSXConnectSecondSubIfNumber 1.3.6.1.4.1.664.5.53.1.5.1.1.1.11
A number that further defines some interfaces -- set to 0 if the interface can be defined by adGenAOSXConnectSecondIfSlot and adGenAOSXConnectSecondIfPort
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..1007  

adGenAOSXConnectSecondIfSlot 1.3.6.1.4.1.664.5.53.1.5.1.1.1.12
The slot number containing the interface described by adGenAOSXConnectSecondIfType -- set to 0 if the interface can be defined by adGenAOSXConnectSecondIfNumber (and adGenAOSXConnectSecondSubIfNumber) Note: 0 is also a valid slot number.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..96  

adGenAOSXConnectSecondIfPort 1.3.6.1.4.1.664.5.53.1.5.1.1.1.13
The port number of the interface described by adGenAOSXConnectSecondIfType -- set to 0 if the interface can be defined by adGenAOSXConnectSecondIfNumber (and adGenAOSXConnectSecondSubIfNumber)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..48  

adGenAOSXConnectSecondTdmGroup 1.3.6.1.4.1.664.5.53.1.5.1.1.1.14
A number uniquely identifying the TDM Group associated with the interface described by adGenAOSXConnectSecondIfType -- set to 0 if it is not necessary that a TDM Group be associated with the interface
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

adGenAOSXConnectSecondTdmGroupDS0 1.3.6.1.4.1.664.5.53.1.5.1.1.1.15
The specific DS0 of the TDM Group, described by adGenAOSXConnectSecondTdmGroup, to which a cross- connect is being made -- set to 0 if it is not necessary that a specific timeslot be defined
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..32  

adGenAOSXConnectPreserveRbs 1.3.6.1.4.1.664.5.53.1.5.1.1.1.16
The ability of the cross-connect to maintain robbed-bit signaling integrity -- set to disabled if robbed-bit signaling is not a characteristic of the cross-connect.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

adGenAOSXConnectRowStatus 1.3.6.1.4.1.664.5.53.1.5.1.1.1.17
The status of this conceptual row. Until instances of appropriate corresponding columns are configured, the value of the corresponding instance of the adGenAOSXConnectStatus column is 'notReady'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

adGenAOSTdmGroupTable 1.3.6.1.4.1.664.5.53.1.5.2.1
The TDM Group Table that associates DS0s into mappable units
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AdGenAOSTdmGroupEntry

adGenAOSTdmGroupEntry 1.3.6.1.4.1.664.5.53.1.5.2.1.1
An entry in the TDM Group Table
Status: current Access: not-accessible
OBJECT-TYPE    
  AdGenAOSTdmGroupEntry  

adGenAOSTdmGroupIfSlot 1.3.6.1.4.1.664.5.53.1.5.2.1.1.1
The slot number containing the interface for the TDM Group
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..96  

adGenAOSTdmGroupIfPort 1.3.6.1.4.1.664.5.53.1.5.2.1.1.2
The port number containing the interface for the TDM Group
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..48  

adGenAOSTdmGroupID 1.3.6.1.4.1.664.5.53.1.5.2.1.1.3
A number that uniquely defines the TDM Group
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

adGenAOSTdmGroupMask 1.3.6.1.4.1.664.5.53.1.5.2.1.1.4
A bitmap of the contiguous DS0s included in this TDM Group Example: mapping DS0s 1-12: 00000000000000000000111111111111 (bin), 00000FFF (hex), 4095 (dec) Note: To create a new row in adGenAOSTdmGroupTable, set adGenAOSTdmGroupMask with the appropriate index values corresponding to the desired slot, port, and TDM group ID
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adGenAOSTdmGroupUsage 1.3.6.1.4.1.664.5.53.1.5.2.1.1.5
The speed of the individual DS0s
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fiftySixKbps(1), sixtyFourKbps(2)  

adGenAOSMuxConformancemModule 1.3.6.1.4.1.664.5.53.1.5.99.1.1
The compliance statement for SNMPv2 entities which implement the adGenAOSMux MIB.
Status: current Access: read-write
MODULE-COMPLIANCE    

adGenAOSXConnectGrp 1.3.6.1.4.1.664.5.53.1.5.99.2.1
The Cross-Connect Group.
Status: current Access: read-write
OBJECT-GROUP    

adGenAOSTdmGroupGrp 1.3.6.1.4.1.664.5.53.1.5.99.2.2
The TDM Group Group.
Status: current Access: read-write
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor