ADTRAN-TSUIQ-MIB

File: ADTRAN-TSUIQ-MIB.mib (63524 bytes)

Imported modules

RFC1155-SMI	RFC-1212	RFC1213-MIB
RFC-1215	ADTRAN-MIB

Imported symbols

enterprises	Counter	IpAddress
Gauge	OBJECT-TYPE	DisplayString
ifIndex	TRAP-TYPE	adProdPhysAddress
adProducts	adMgmt

Defined Types

AdTSUIQPvcConfigEntry
SEQUENCE
	adTSUIQPvcConfigIndex	INTEGER
	adTSUIQPvcDLCI	INTEGER
	adTSUIQPvcCIR	INTEGER
	adTSUIQPvcSequenceOption	INTEGER
	adTSUIQPvcDelayPacketOption	INTEGER
	adTSUIQPvcDBUDLCI	INTEGER
	adTSUIQPvcStatsControl	INTEGER

AdTSUIQIntT1StatusEntry
SEQUENCE
	adTSUIQIntT1SlotIndex	INTEGER
	adTSUIQIntT1UnavailableTime	Counter
	adTSUIQIntT1StateChange	Counter
	adTSUIQIntT1SignalLossEvent	INTEGER
	adTSUIQIntT1LoopBackEvent	INTEGER
	adTSUIQIntT1AISEvent	INTEGER
	adTSUIQIntT1RedAlarmEvent	INTEGER
	adTSUIQIntT1YellowAlarmEvent	INTEGER
	adTSUIQIntT1PLLAlarmEvent	INTEGER
	adTSUIQIntT1PathCodeViolation	Counter
	adTSUIQIntT1LineCodeViolation	Counter

AdTSUIQDayT1StatusEntry
SEQUENCE
	adTSUIQDayT1SlotIndex	INTEGER
	adTSUIQDayT1UnavailableTime	Counter
	adTSUIQDayT1StateChange	Counter
	adTSUIQDayT1SignalLossEvent	INTEGER
	adTSUIQDayT1LoopBackEvent	INTEGER
	adTSUIQDayT1AISEvent	INTEGER
	adTSUIQDayT1RedAlarmEvent	INTEGER
	adTSUIQDayT1YellowAlarmEvent	INTEGER
	adTSUIQDayT1PLLAlarmEvent	INTEGER
	adTSUIQDayT1PathCodeViolation	Counter
	adTSUIQDayT1LineCodeViolation	Counter

AdTSUIQDiagnosticEntry
SEQUENCE
	adTSUIQDiagnosticIndex	INTEGER
	adTSUIQDiagnosticDlci	INTEGER
	adTSUIQDiagnosticControl	INTEGER
	adTSUIQDiagnosticDuration	INTEGER
	adTSUIQDiagnosticStatus	INTEGER
	adTSUIQDiagnosticSecondsRemaining	INTEGER
	adTSUIQDiagnosticFramesTx	Counter
	adTSUIQDiagnosticFramesRx	Counter
	adTSUIQDiagnosticLostFrames	Counter
	adTSUIQDiagnosticMaxDelay	Gauge
	adTSUIQDiagnosticMinDelay	Gauge
	adTSUIQDiagnosticAvgDelay	Gauge

AdTSUIQ1406TimeEntry
SEQUENCE
	adTSUIQ1406TimeSlotIndex	INTEGER
	adTSUIQ1406TimeStamp	DisplayString

AdTSUIQIntDBUStatusEntry
SEQUENCE
	adTSUIQIntDBUSlotIndex	INTEGER
	adTSUIQIntDBUFramesRx	Counter
	adTSUIQIntDBUFramesTx	Counter
	adTSUIQIntDBUBytesRx	Counter
	adTSUIQIntDBUBytesTx	Counter
	adTSUIQIntDBUAvgThruputTx	Gauge
	adTSUIQIntDBUAvgThruputRx	Gauge
	adTSUIQIntDBUMaxThruputTx	Counter
	adTSUIQIntDBUMaxThruputRx	Counter
	adTSUIQIntDBUAvgUtilizationTx	Gauge
	adTSUIQIntDBUAvgUtilizationRx	Gauge
	adTSUIQIntDBUMaxUtilizationTx	Counter
	adTSUIQIntDBUMaxUtilizationRx	Counter
	adTSUIQIntTimeInDBU	Counter
	adTSUIQIntDBUCrcErrors	Counter
	adTSUIQIntDBUAbortFrames	Counter
	adTSUIQIntDBUOctectViolations	Counter
	adTSUIQIntDBUDiscardFrames	Counter
	adTSUIQIntDBULengthErrors	Counter
	adTSUIQIntDBUEncapsulationErrors	Counter
	adTSUIQIntDBUUnroutable	Counter

AdTSUIQDayDBUStatusEntry
SEQUENCE
	adTSUIQDayDBUSlotIndex	INTEGER
	adTSUIQDayDBUFramesRx	Counter
	adTSUIQDayDBUFramesTx	Counter
	adTSUIQDayDBUBytesRx	Counter
	adTSUIQDayDBUBytesTx	Counter
	adTSUIQDayDBUAvgThruputTx	Gauge
	adTSUIQDayDBUAvgThruputRx	Gauge
	adTSUIQDayDBUMaxThruputTx	Counter
	adTSUIQDayDBUMaxThruputRx	Counter
	adTSUIQDayDBUAvgUtilizationTx	Gauge
	adTSUIQDayDBUAvgUtilizationRx	Gauge
	adTSUIQDayDBUMaxUtilizationTx	Counter
	adTSUIQDayDBUMaxUtilizationRx	Counter
	adTSUIQDayTimeInDBU	Counter
	adTSUIQDayDBUCrcErrors	Counter
	adTSUIQDayDBUAbortFrames	Counter
	adTSUIQDayDBUOctectViolations	Counter
	adTSUIQDayDBUDiscardFrames	Counter
	adTSUIQDayDBULengthErrors	Counter
	adTSUIQDayDBUEncapsulationErrors	Counter
	adTSUIQDayDBUUnroutable	Counter

AdTSUIQTrapManagerEntry
SEQUENCE
	adTSUIQTrapManagerRouteIndex	INTEGER
	adTSUIQTrapManagerRouteIPAddress	IpAddress
	adTSUIQTrapManagerRouteDLCI	INTEGER
	adTSUIQTrapManagerRoutePort	INTEGER

Defined Values

adTSUIQ		1.3.6.1.4.1.664.1.147
OBJECT IDENTIFIER

adTSUIQmg		1.3.6.1.4.1.664.2.147
OBJECT IDENTIFIER

adTSUIQSystemConfig		1.3.6.1.4.1.664.2.147.1
OBJECT IDENTIFIER

adTSUIQNetPortConfig		1.3.6.1.4.1.664.2.147.2
OBJECT IDENTIFIER

adTSUIQDtePortConfig		1.3.6.1.4.1.664.2.147.3
OBJECT IDENTIFIER

adTSUIQPvcConfig		1.3.6.1.4.1.664.2.147.4
OBJECT IDENTIFIER

adTSUIQCurrentStatus		1.3.6.1.4.1.664.2.147.5
OBJECT IDENTIFIER

adTSUIQIntT1Status		1.3.6.1.4.1.664.2.147.6
OBJECT IDENTIFIER

adTSUIQDayT1Status		1.3.6.1.4.1.664.2.147.7
OBJECT IDENTIFIER

adTSUIQDiagnostic		1.3.6.1.4.1.664.2.147.8
OBJECT IDENTIFIER

adTSUIQ1406Time		1.3.6.1.4.1.664.2.147.9
OBJECT IDENTIFIER

adTSUIQDBUConfig		1.3.6.1.4.1.664.2.147.10
OBJECT IDENTIFIER

adTSUIQIntDBUStatus		1.3.6.1.4.1.664.2.147.11
OBJECT IDENTIFIER

adTSUIQDayDBUStatus		1.3.6.1.4.1.664.2.147.12
OBJECT IDENTIFIER

adTSUIQTrapManager		1.3.6.1.4.1.664.2.147.13
OBJECT IDENTIFIER

adTSUIQPassword		1.3.6.1.4.1.664.2.147.1.1
Sets the Telnet and Vt100 Control Password.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

adTSUIQTOD		1.3.6.1.4.1.664.2.147.1.2
Sets the Time of Day with format hh:mm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

adTSUIQDate		1.3.6.1.4.1.664.2.147.1.3
Sets the Date with the format MM-DD-YY.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

adTSUIQIpAddress		1.3.6.1.4.1.664.2.147.1.4
Sets the unit's IP Address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

adTSUIQIpAddressMask		1.3.6.1.4.1.664.2.147.1.5
Sets the Network Subnet Mask.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

adTSUIQGatewayIpAddress		1.3.6.1.4.1.664.2.147.1.6
Sets the Network Gateway IP Address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

adTSUIQTrapManagerIpAddress		1.3.6.1.4.1.664.2.147.1.7
Sets the Trap Manager IP Address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

adTSUIQTrapManagerDLCI		1.3.6.1.4.1.664.2.147.1.8
Sets the Trap Manager DLCI. (Range 16 - 1007).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	16..1007

adTSUIQTrapManagerPort		1.3.6.1.4.1.664.2.147.1.9
Selects the Trap Manager Port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), dtePort(2), networkPort(3), controlPort(4), ethernetPort(5)

adTSUIQControPortBaud		1.3.6.1.4.1.664.2.147.1.10
Selects the Control Port Baud Rate.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	bps9600(1), bps19200(2), bps38400(3)

adTSUIQControPortMode		1.3.6.1.4.1.664.2.147.1.11
Selects the Control Port Mode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	terminal(1), slip(2), ppp(3)

adTSUIQEnableTraps		1.3.6.1.4.1.664.2.147.1.12
Overall trap enable/disable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

adTSUIQAlarmState		1.3.6.1.4.1.664.2.147.1.13
This bit map variable indicates alarm conditions which are currently set. When an alarm condition occurs, the corresponding event bit is set in this variable. If armed, setting the event will generate an Alarm Trap. The various alarm event bit positions are: 1 = Network physical link up. 2 = Network physical link down. 4 = Network signal state up. 8 = Network signal state down.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

adTSUIQArmAlarm		1.3.6.1.4.1.664.2.147.1.14
This bit map variable arms or disarms an individual or group of events identified in adFradAlarmState as a source for generation of an Alarm Trap. The various arm event bit positions are : 1 = Network physical link up. 2 = Network physical link down. 4 = Network signal state up. 8 = Network signal state down.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..15

adTSUIQAbortConfig		1.3.6.1.4.1.664.2.147.1.15
A Set will cancel current selections and reverts to the last saved configuration.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	abortConfig(1)

adTSUIQSaveConfig		1.3.6.1.4.1.664.2.147.1.16
A Set will reset the unit and Save the current selections.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	saveConfig(1)

adTSUIQNetPortFrameType		1.3.6.1.4.1.664.2.147.2.1
Frame type for T1 interface
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	d4(1), eSF(2), auto(3)

adTSUIQNetPortClockSource		1.3.6.1.4.1.664.2.147.2.2
Timing source for the transmit side of the T1 interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	internal(1), fromNetwork(2)

adTSUIQNetPortLineCode		1.3.6.1.4.1.664.2.147.2.3
Line code for the the T1 interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	b8ZS(1), aMI(2)

adTSUIQNetRxSensitivity		1.3.6.1.4.1.664.2.147.2.4
Selects the gain of receiver for the T1 interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), extended(2)

adTSUIQNetPortLBO		1.3.6.1.4.1.664.2.147.2.5
Line build out for the transmit side of the T1 interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	auto(1), dB0(2), dB7(3), dB15(4), db22(5)

adTSUIQNetChannelCount		1.3.6.1.4.1.664.2.147.2.6
Selects the number of active channels for the T1 interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..24

adTSUIQNetChannelStart		1.3.6.1.4.1.664.2.147.2.7
Selects the channel that begins the active channel list for the T1 interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..24

adTSUIQNetChannelBandwidth		1.3.6.1.4.1.664.2.147.2.8
Selects the amount of data in each active channel for the T1 interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	x56Kbps(1), x64Kbps(2)

adTSUIQNetChannelAlignment		1.3.6.1.4.1.664.2.147.2.9
Selects the alignment of active channels for the T1 interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	contiguous(1), alternating(2)

adTSUIQNetTransmitPRM		1.3.6.1.4.1.664.2.147.2.10
Enables performance report generation across the T1 FDL for the T1 interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	pRMon(1), pRMoff(2)

adTSUIQNetPortSignaling		1.3.6.1.4.1.664.2.147.2.11
Signaling type for the frame relay management interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), conLMI(2), ansiT1617D(3), ituQ933A(4), auto(5)

adTSUIQNetPortt391		1.3.6.1.4.1.664.2.147.2.12
Sets the polling interval in seconds for the frame relay management interface. (Range 5 - 30).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5..30

adTSUIQNetPortn391		1.3.6.1.4.1.664.2.147.2.13
Sets the interval between full status polls for the frame relay management interface. (Range 1 - 255).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..255

adTSUIQNetPortn392		1.3.6.1.4.1.664.2.147.2.14
Sets the error count for the frame relay management interface. (Range 1 - 10).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..10

adTSUIQNetPortn393		1.3.6.1.4.1.664.2.147.2.15
Sets the event window for the frame relay management interface. ( Range 1 - 10).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..10

adTSUIQNetPortMgmtDlci1Mode		1.3.6.1.4.1.664.2.147.2.16
Sets the mode for the managent DLCI 1. If set for shared, management DLCI 1 is used for customer data and IQ management data. If set for dedicated, management DLCI 1 is used only for IQ management data and is not passed to the attached frame relay DTE device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	shared(1), dedicated(2)

adTSUIQNetPortMgmtDlci2Mode		1.3.6.1.4.1.664.2.147.2.17
Sets the mode for the managent DLCI 2. If set for shared, management DLCI 2 is used for customer data and IQ management data. If set for dedicated, management DLCI 2 is used only for IQ management data and is not passed to the attached frame relay DTE device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	shared(1), dedicated(2)

adTSUIQNetMgmtDlci1		1.3.6.1.4.1.664.2.147.2.18
Sets the address for management PVC 1. (Range 16 - 1007).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	16..1007

adTSUIQNetMgmtDlci2		1.3.6.1.4.1.664.2.147.2.19
Sets the address for management PVC 2. (Range 16 - 1007).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	16..1007

adTSUIQNetPortMaxPVCs		1.3.6.1.4.1.664.2.147.2.20
Sets the maxium PVCs supported by the IQ unit. (Range 1 - 100).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..100

adTSUIQNetPortHistIntervals		1.3.6.1.4.1.664.2.147.2.21
Sets the number of history intervals for storage.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

adTSUIQNetPortHistIntervalsAvailable		1.3.6.1.4.1.664.2.147.2.22
Returns the number of history intervals allowed based on the maxium number of PVCs selected.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adTSUIQDteCTSOption		1.3.6.1.4.1.664.2.147.3.1
Selects the Clear to Send (CTS) option.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	forcedOn(1), followRTS(2)

adTSUIQDteCDOption		1.3.6.1.4.1.664.2.147.3.2
Selects the Carrier Detect (CD) option.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	forcedOn(1), normal(2)

adTSUIQDteDSROption		1.3.6.1.4.1.664.2.147.3.3
Selects the Data Set Ready (DSR) option.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	forcedOn(1), normal(2)

adTSUIQDtePortMgmtDLCI		1.3.6.1.4.1.664.2.147.3.4
Selects the DTE Port Management DLCI. (Range 16 - 1007).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	16..1007

adTSUIQDtePortt392		1.3.6.1.4.1.664.2.147.3.5
Sets the timeout in seconds between polling intervals. (Range 5 - 30)..
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	5..30

adTSUIQDtePortn392		1.3.6.1.4.1.664.2.147.3.6
Sets the number of error events for the frame relay management. (Range 1 - 10)..
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..10

adTSUIQDtePortn393		1.3.6.1.4.1.664.2.147.3.7
Sets the error window (polling events) for the frame relay management. (Range 1 - 10).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..10

adTSUIQDteTCClockOption		1.3.6.1.4.1.664.2.147.3.8
Sets the phase of the DTE Transmit clock.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), inverted(2)

adTSUIQDteManagementPvcOption		1.3.6.1.4.1.664.2.147.3.9
Controls the presence of the DTE management PVC in a full status response to the DTE device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

adTSUIQDteSignalingResponsesOption		1.3.6.1.4.1.664.2.147.3.10
Determines how the IQ device will respond to polls from the DTE device during a network failure. If set to always on, the IQ will respond to polls during a network failure. If set to follow network, the IQ will not respond thus emulating a failure to the DTE device. If the IQ is responsible for dial backup, this option should be set to always on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	alwaysOn(1), followsNetwork(2)

adTSUIQDteFlowControlOption		1.3.6.1.4.1.664.2.147.3.11
Determines how the IQ device will respond to congestion during DBU operation. If set for none, the IQ will drop frames during DBU operation when severe congestion occurs. If set for hardware, the IQ will vary the DTE TC clock in order to control the amount of data offered to the IQ when severe congestion occurs. FECN/BECN mode will set the FECN bit in outbound frames and set BECN bit for inbound frames leaving flow control up to the DTE devices.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), hardware(2), fECNBECN(3)

adTSUIQPvcConfigTable		1.3.6.1.4.1.664.2.147.4.1
n/a.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdTSUIQPvcConfigEntry

adTSUIQPvcConfigEntry		1.3.6.1.4.1.664.2.147.4.1.1
n/a
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdTSUIQPvcConfigEntry

adTSUIQPvcConfigIndex		1.3.6.1.4.1.664.2.147.4.1.1.1
n/a.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adTSUIQPvcDLCI		1.3.6.1.4.1.664.2.147.4.1.1.2
Address for this PVC entry. (Range 16 - 1007).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	16..1007

adTSUIQPvcCIR		1.3.6.1.4.1.664.2.147.4.1.1.3
Commited Information Rate for this PVC in Kbps. (Range 0 - 1536).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1536

adTSUIQPvcSequenceOption		1.3.6.1.4.1.664.2.147.4.1.1.4
Sequence number allows the IQ to detect lost frames across the frame relay service. This option should be disabled for PVCs that do not have IQ on both ends.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

adTSUIQPvcDelayPacketOption		1.3.6.1.4.1.664.2.147.4.1.1.5
Delay packet option for this PVC allows the IQ to sample round trip delay across the frame relay service. This option should be disabled for PVCs that do not have IQ on both ends.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

adTSUIQPvcDBUDLCI		1.3.6.1.4.1.664.2.147.4.1.1.6
Used when this PVC entry is used for dial backup. This value should contain the PVC address as seen on the far end of the PVC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	16..1007

adTSUIQPvcStatsControl		1.3.6.1.4.1.664.2.147.4.1.1.7
Stats Control option determines how the IQ will track statistics for this PVC entry. Auto will allow the IQ to track statistics for a PVC if enough memory is available.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	auto(1), enabled(2), disabled(3)

adTSUIQT1State		1.3.6.1.4.1.664.2.147.5.1
Current status of the T1 interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	openLoop(1), testFromTelco(2), blueAlarm(3), redAlarm(4), yellowAlarm(5), eSFNormal(6), d4Normal(7)

adTSUIQDteControlLeads		1.3.6.1.4.1.664.2.147.5.2
This bit map integer reflects the current state of the DTE control leads as follows: bit meaning 0 CTS 1 RTS 2 DSR 3 DTR 4 DCD A 1 means the lead is on.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..31

adTSUIQDBUPortType		1.3.6.1.4.1.664.2.147.5.3
Returns the DBU card type installed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	empty(1), v34modem(2), dce(3), sw564wire(4), sw562wire(5), isdn(6)

adTSUIQLANPortStatus		1.3.6.1.4.1.664.2.147.5.4
Returns the LAN card type installed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	empty(1), ethernet(2)

adTSUIQLEDstatus		1.3.6.1.4.1.664.2.147.5.5
This bit map integer reflects TSUIQ front panel LED state as follows: bit meaning 0 TEST 1 ALARM 2 ERROR 3 RD 4 TD 5 CTS 6 RTS
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..127

adTSUIQDTESignalingState		1.3.6.1.4.1.664.2.147.5.6
Current state of the PVC signaling between the TSUIQ and the attached frame relay dte.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

adTSUIQNETSignalingState		1.3.6.1.4.1.664.2.147.5.7
Current state of the PVC signaling between the TSUIQ and the frame relay service.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

adTSUIQNETPVCCount		1.3.6.1.4.1.664.2.147.5.8
Current count of network pvcs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adTSUIQNETPVCConfigTableSize		1.3.6.1.4.1.664.2.147.5.9
Current count of rows in the PVC config table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adTSUIQDBUState		1.3.6.1.4.1.664.2.147.5.10
Current state of the DBU interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	emptySlot(1), openLoop(2), gettingTEI(3), tEIOK(4), sPIDOK(5), idle(6), inDBU(7), waitingForCall(8), noSealingCurrent(9), outOfService(10), noRXSignal(11), ringing(12), dialing(13), dialingNumber1(14), dialingNumber2(15), dialingNumber3(16), dialingNumber4(17), dialingNumber5(18), anserwingCall(19), noDialTone(20), noAnswer(21), busy(22), waitingToDial(23), connect(24), connect33d6(25), connect31d2(26), connect115d2R(27), connect115d2(28), connect28d8(29), connect26d4(30), connect24d0(31), connect21d6(32), connect57d6R(33), connect38d4R(34), connect19d2R(35), connect9d6R(36), connect4d8R(37), connect2d4R(38), connect16d8(39), connect14d4(40), connect12d0(41), connect7d2(42), connect57d6(43), connect38d4(44), connect19d2(45), connect9d6(46), connect4d8(47), connect2d4(48), sendingPasscode(49), waitingPasscode(50), invalidPasscode(51), validPasscode(52), error(53)

adTSUIQIntT1StatusTable		1.3.6.1.4.1.664.2.147.6.1
n/a.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdTSUIQIntT1StatusEntry

adTSUIQIntT1StatusEntry		1.3.6.1.4.1.664.2.147.6.1.1
n/a
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdTSUIQIntT1StatusEntry

adTSUIQIntT1SlotIndex		1.3.6.1.4.1.664.2.147.6.1.1.1
n/a.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adTSUIQIntT1UnavailableTime		1.3.6.1.4.1.664.2.147.6.1.1.2
Amount of time in seconds the T1 port is unavailable due to test or in an inactive state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntT1StateChange		1.3.6.1.4.1.664.2.147.6.1.1.3
Number of changes in the T1 port state. This includes all normal, inactive, and test state transitions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntT1SignalLossEvent		1.3.6.1.4.1.664.2.147.6.1.1.4
Active state represents one or more signal loss events.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

adTSUIQIntT1LoopBackEvent		1.3.6.1.4.1.664.2.147.6.1.1.5
Active state represents one or more loopback events.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

adTSUIQIntT1AISEvent		1.3.6.1.4.1.664.2.147.6.1.1.6
Active state represents one or more AIS events. AIS is triggered by unframed all ones condition from the T1 service provider.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

adTSUIQIntT1RedAlarmEvent		1.3.6.1.4.1.664.2.147.6.1.1.7
Active state represents one or more red alarm events. Red alarm is triggered by loss of frame alignment on the receive T1 signal.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

adTSUIQIntT1YellowAlarmEvent		1.3.6.1.4.1.664.2.147.6.1.1.8
Active state represents one or more yellow alarm events. Yellow alarm is an indication the service provider has lost frame alignmnet.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

adTSUIQIntT1PLLAlarmEvent		1.3.6.1.4.1.664.2.147.6.1.1.9
Active state represents one or more PLL alarm events. PLL alarm is an indication that the transmit and receive side of the T1 interface are not looped timed. This will occur when both ends of the T1 are set to provide timing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

adTSUIQIntT1PathCodeViolation		1.3.6.1.4.1.664.2.147.6.1.1.10
Count of path code violations received. Path code violations are a errors in the frame bit postions for D4 and ESF CRC errors when set for ESF.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntT1LineCodeViolation		1.3.6.1.4.1.664.2.147.6.1.1.11
Count of line code violations received. Line code violations are a combination of BPVs that are not part of B8ZS code and excess zeros. Excess zeros are 8 or more consecutive zeros when set for B8ZS and 15 or more consecutive zeros when set for AMI.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayT1StatusTable		1.3.6.1.4.1.664.2.147.7.1
n/a.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdTSUIQDayT1StatusEntry

adTSUIQDayT1StatusEntry		1.3.6.1.4.1.664.2.147.7.1.1
n/a
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdTSUIQDayT1StatusEntry

adTSUIQDayT1SlotIndex		1.3.6.1.4.1.664.2.147.7.1.1.1
n/a.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adTSUIQDayT1UnavailableTime		1.3.6.1.4.1.664.2.147.7.1.1.2
Amount of time in seconds the T1 port is unavailable due to test or in an inactive state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayT1StateChange		1.3.6.1.4.1.664.2.147.7.1.1.3
Number of changes in the T1 port state. This includes all normal, inactive, and test state transitions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayT1SignalLossEvent		1.3.6.1.4.1.664.2.147.7.1.1.4
Active state represents one or more signal loss events.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

adTSUIQDayT1LoopBackEvent		1.3.6.1.4.1.664.2.147.7.1.1.5
Active state represents one or more loopback events.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

adTSUIQDayT1AISEvent		1.3.6.1.4.1.664.2.147.7.1.1.6
Active state represents one or more AIS events. AIS is triggered by unframed all ones condition from the T1 service provider.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

adTSUIQDayT1RedAlarmEvent		1.3.6.1.4.1.664.2.147.7.1.1.7
Active state represents one or more red alarm events. Red alarm is triggered by loss of frame alignment on the receive T1 signal.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

adTSUIQDayT1YellowAlarmEvent		1.3.6.1.4.1.664.2.147.7.1.1.8
Active state represents one or more yellow alarm events. Yellow alarm is an indication the service provider has lost frame alignmnet.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

adTSUIQDayT1PLLAlarmEvent		1.3.6.1.4.1.664.2.147.7.1.1.9
Active state represents one or more PLL alarm events. PLL alarm is an indication that the transmit and receive side of the T1 interface are not looped timed. This will occur when both ends of the T1 are set to provide timing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

adTSUIQDayT1PathCodeViolation		1.3.6.1.4.1.664.2.147.7.1.1.10
Count of path code violations received. Path code violations are a errors in the frame bit postions for D4 and ESF CRC errors when set for ESF.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayT1LineCodeViolation		1.3.6.1.4.1.664.2.147.7.1.1.11
Count of line code violations received. Line code violations are a combination of BPVs that are not part of B8ZS code and excess zeros. Excess zeros are 8 or more consecutive zeros when set for B8ZS and 15 or more consecutive zeros when set for AMI.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDiagnosticTable		1.3.6.1.4.1.664.2.147.8.1
n/a.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdTSUIQDiagnosticEntry

adTSUIQDiagnosticEntry		1.3.6.1.4.1.664.2.147.8.1.1
n/a
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdTSUIQDiagnosticEntry

adTSUIQDiagnosticIndex		1.3.6.1.4.1.664.2.147.8.1.1.1
n/a.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adTSUIQDiagnosticDlci		1.3.6.1.4.1.664.2.147.8.1.1.2
Sets the DLCI for PVC Loopback. (Range 16 - 1007).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	16..1007

adTSUIQDiagnosticControl		1.3.6.1.4.1.664.2.147.8.1.1.3
Starts or Stops the PVC Loopback Test.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	control(1)

adTSUIQDiagnosticDuration		1.3.6.1.4.1.664.2.147.8.1.1.4
Test duration in seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

adTSUIQDiagnosticStatus		1.3.6.1.4.1.664.2.147.8.1.1.5
PVC Loopback Test Status. (Active/Inactive).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	diagnosticOff(1), diagnosticOn(2)

adTSUIQDiagnosticSecondsRemaining		1.3.6.1.4.1.664.2.147.8.1.1.6
PVC Loopback Test time remaining in seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adTSUIQDiagnosticFramesTx		1.3.6.1.4.1.664.2.147.8.1.1.7
Diagnostic Frames transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDiagnosticFramesRx		1.3.6.1.4.1.664.2.147.8.1.1.8
Diagnostic Frames received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDiagnosticLostFrames		1.3.6.1.4.1.664.2.147.8.1.1.9
Diagnostic Frames Lost.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDiagnosticMaxDelay		1.3.6.1.4.1.664.2.147.8.1.1.10
Diagnostic Maximum Delay measurement.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

adTSUIQDiagnosticMinDelay		1.3.6.1.4.1.664.2.147.8.1.1.11
Diagnostic Minimum Delay measurement.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

adTSUIQDiagnosticAvgDelay		1.3.6.1.4.1.664.2.147.8.1.1.12
Diagnostic Average Delay measurement.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

adTSUIQ1406TimeTable		1.3.6.1.4.1.664.2.147.9.1
n/a.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdTSUIQ1406TimeEntry

adTSUIQ1406TimeEntry		1.3.6.1.4.1.664.2.147.9.1.1
n/a
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdTSUIQ1406TimeEntry

adTSUIQ1406TimeSlotIndex		1.3.6.1.4.1.664.2.147.9.1.1.1
n/a.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adTSUIQ1406TimeStamp		1.3.6.1.4.1.664.2.147.9.1.1.2
Time interval started. Format H:M if not midnight else M-D
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adTSUIQDBUOption		1.3.6.1.4.1.664.2.147.10.1
This option specifies whether the unit automatically enters dial backup mode or waits for manual setup.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

adTSUIQDBUStartLockout		1.3.6.1.4.1.664.2.147.10.2
This option selects the hour to begin disabling dial backup operation when daily or weekend lockout mode is active.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..23

adTSUIQDBUEndLockout		1.3.6.1.4.1.664.2.147.10.3
This option selects the hour to end dial backup lockout when daily or weekend lockout mode is active.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..23

adTSUIQDBUMode		1.3.6.1.4.1.664.2.147.10.4
This option specifies the dial backup operating mode for the unit as orginate or answer. One end must be set to originate and the other end to answer.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	answer(1), originate(2)

adTSUIQDBUWithNetworkFailure		1.3.6.1.4.1.664.2.147.10.5
This option enables the unit to enter backup mode when T1 network failure occurs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

adTSUIQDBUNoLMI		1.3.6.1.4.1.664.2.147.10.6
This option enables the unit to enter backup mode when network PVC signaling state goes down.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

adTSUIQAutoRestoreTimer		1.3.6.1.4.1.664.2.147.10.7
This option selects the amount of time that the TSUIQ circuit must be active before the unit switches from backup to normal mode of operation. The timer value is in minutes from 0 to 60. A zero value disables automatic restore, TSUIQ operation must be restored manually.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..60

adTSUIQRedialCount		1.3.6.1.4.1.664.2.147.10.8
This option allows the selection of the number of times the unit will redial the Far End unit when attempting to go to backup and a busy or reorder condition occurs. Redial count can be set for a maximum of 60.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..60

adTSUIQDBUFailTimeout		1.3.6.1.4.1.664.2.147.10.9
This option allows the selection of the amount of time that the dedicated circuit failure condition is active before attempting to enter dial backup mode. The Fail Timeout value is in increments of 10 seconds up to a maximum of 600 seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..60

adTSUIQDBURedialTimer		1.3.6.1.4.1.664.2.147.10.10
This option works in conjunction with the Redial Counter option. The Redial Timer specifies the amount of time between redial attempts. The Redial Timer value is seconds, up to a maximum of 60 seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..60

adTSUIQDBUPassCheck		1.3.6.1.4.1.664.2.147.10.11
This option allows the unit to send and verify a dial backup passcode for an additional level of security. When enabled, the originate unit sends the passcode and the answer unit checks the passcode before the backup connection is considered valid.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

adTSUIQDBUPassCode		1.3.6.1.4.1.664.2.147.10.12
This option sets the dial backup passcode used to provide an additional level of security. A passcode of one to ten digit characters can be set. If enabled, the originate unit sends the passcode and the answer unit checks the passcode to verify the connection.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

adTSUIQWeekendLockout		1.3.6.1.4.1.664.2.147.10.13
This option enables or disables Weekend Lockout for Dial Backup operation. If enabled, no backup will occur from midnight Friday to midnight Sunday.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

adTSUIQDailyLockout		1.3.6.1.4.1.664.2.147.10.14
This option enables or disables Daily Lockout for Dial Backup operation. If enabled, no backup will occur between Lockout Start hour and Lockout End hour.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

adTSUIQAnswerAlways		1.3.6.1.4.1.664.2.147.10.15
This option enables or disables Answer Always for Dial Backup operation. If enabled, the answer unit answers any incoming call regardless of failed conditions.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

adTSUIQBeeperOption		1.3.6.1.4.1.664.2.147.10.16
This option enables or disables the audible alarm when the IQ unit goes into dial backup mode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

adTSUIQDBUPhoneNumber1		1.3.6.1.4.1.664.2.147.10.17
This option is used to set a phone number to place a DBU call.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

adTSUIQDBUPhoneNumber2		1.3.6.1.4.1.664.2.147.10.18
This option is used to set a phone number to place a DBU call.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

adTSUIQDBUPhoneNumber3		1.3.6.1.4.1.664.2.147.10.19
This option is used to set a phone number to place a DBU call.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

adTSUIQDBUPhoneNumber4		1.3.6.1.4.1.664.2.147.10.20
This option is used to set a phone number to place a DBU call.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

adTSUIQDBUPhoneNumber5		1.3.6.1.4.1.664.2.147.10.21
This option is used to set a phone number to place a DBU call.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

adTSUIQDBUISDNSwitch		1.3.6.1.4.1.664.2.147.10.22
This option is used to select the ISDN switch type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	att-5ess(1), nt-dms-100(2), national-isdn1(3)

adTSUIQDBUISDNBChannelRate		1.3.6.1.4.1.664.2.147.10.23
This option is used to select the ISDN channel rate.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	bps56000(1), bps64000(2)

adTSUIQDBUISDNBChannelCount		1.3.6.1.4.1.664.2.147.10.24
This option is used to select the number ISDN channels to use.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..2

adTSUIQDBUISDNSPID1		1.3.6.1.4.1.664.2.147.10.25
This option is used to set the SPID for the ISDN interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

adTSUIQDBUISDNSPID2		1.3.6.1.4.1.664.2.147.10.26
This option is used to set the SPID for the ISDN interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

adTSUIQDBUISDNLDN1		1.3.6.1.4.1.664.2.147.10.27
This option is used to set LDN for the ISDN interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

adTSUIQDBUISDNLDN2		1.3.6.1.4.1.664.2.147.10.28
This option is used to set LDN for the ISDN interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

adTSUIQV34LineType		1.3.6.1.4.1.664.2.147.10.29
This option selects the type of analog phone line.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	tone(1), pulse(2)

adTSUIQDCEInterfaceType		1.3.6.1.4.1.664.2.147.10.30
This option enables or disables Answer Always for Dial Backup operation. If enabled, the answer unit answers any incoming call regardless of failed conditions.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	rs232(1), v35(2)

adTSUIQDCEBitRate		1.3.6.1.4.1.664.2.147.10.31
This option is uses for utilization measurement of the DBU port when an external DCE device is used. Set this parameter in KBPS close to the connection rate.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..1536

adTSUIQIntDBUStatusTable		1.3.6.1.4.1.664.2.147.11.1
n/a.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdTSUIQIntDBUStatusEntry

adTSUIQIntDBUStatusEntry		1.3.6.1.4.1.664.2.147.11.1.1
n/a
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdTSUIQIntDBUStatusEntry

adTSUIQIntDBUSlotIndex		1.3.6.1.4.1.664.2.147.11.1.1.1
n/a.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adTSUIQIntDBUFramesRx		1.3.6.1.4.1.664.2.147.11.1.1.2
The number of Frames the Port received for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntDBUFramesTx		1.3.6.1.4.1.664.2.147.11.1.1.3
The number of Frames the Port transmitted for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntDBUBytesRx		1.3.6.1.4.1.664.2.147.11.1.1.4
The number of Bytes the Port received for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntDBUBytesTx		1.3.6.1.4.1.664.2.147.11.1.1.5
The number of Bytes the Port transmitted for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntDBUAvgThruputTx		1.3.6.1.4.1.664.2.147.11.1.1.6
The Average Throughput the Port transmitted for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

adTSUIQIntDBUAvgThruputRx		1.3.6.1.4.1.664.2.147.11.1.1.7
The Average Throughput the Port received for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

adTSUIQIntDBUMaxThruputTx		1.3.6.1.4.1.664.2.147.11.1.1.8
The Maximum Throughput the Port transmitted for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntDBUMaxThruputRx		1.3.6.1.4.1.664.2.147.11.1.1.9
The Maximum Throughput the Port received for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntDBUAvgUtilizationTx		1.3.6.1.4.1.664.2.147.11.1.1.10
The Average Utilization the Port transmitted for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

adTSUIQIntDBUAvgUtilizationRx		1.3.6.1.4.1.664.2.147.11.1.1.11
The Average Utilization the Port received for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

adTSUIQIntDBUMaxUtilizationTx		1.3.6.1.4.1.664.2.147.11.1.1.12
The Maximum Utilization the Port transmitted for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntDBUMaxUtilizationRx		1.3.6.1.4.1.664.2.147.11.1.1.13
The Maximum Utilization the Port received for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntTimeInDBU		1.3.6.1.4.1.664.2.147.11.1.1.14
Time in seconds the DBU port was active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntDBUCrcErrors		1.3.6.1.4.1.664.2.147.11.1.1.15
Number of frames received with CRC errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntDBUAbortFrames		1.3.6.1.4.1.664.2.147.11.1.1.16
Number of frames received without proper flag termination.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntDBUOctectViolations		1.3.6.1.4.1.664.2.147.11.1.1.17
Number of frames received with a bit count not divisible by eigth.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntDBUDiscardFrames		1.3.6.1.4.1.664.2.147.11.1.1.18
Number of frames discarded by the IQ unit
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntDBULengthErrors		1.3.6.1.4.1.664.2.147.11.1.1.19
Number of frames received that is less than 5 bytes or greater than 4500 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntDBUEncapsulationErrors		1.3.6.1.4.1.664.2.147.11.1.1.20
Number of frames destined for the IQ IP stack with that does not meet the FRF.3 IA.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQIntDBUUnroutable		1.3.6.1.4.1.664.2.147.11.1.1.21
Number of frames received on a management DLCI destined for the IQ unit and have the wrong IP address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayDBUStatusTable		1.3.6.1.4.1.664.2.147.12.1
n/a.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdTSUIQDayDBUStatusEntry

adTSUIQDayDBUStatusEntry		1.3.6.1.4.1.664.2.147.12.1.1
n/a
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdTSUIQDayDBUStatusEntry

adTSUIQDayDBUSlotIndex		1.3.6.1.4.1.664.2.147.12.1.1.1
n/a.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adTSUIQDayDBUFramesRx		1.3.6.1.4.1.664.2.147.12.1.1.2
The number of Frames the Port received for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayDBUFramesTx		1.3.6.1.4.1.664.2.147.12.1.1.3
The number of Frames the Port transmitted for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayDBUBytesRx		1.3.6.1.4.1.664.2.147.12.1.1.4
The number of Bytes the Port received for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayDBUBytesTx		1.3.6.1.4.1.664.2.147.12.1.1.5
The number of Bytes the Port transmitted for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayDBUAvgThruputTx		1.3.6.1.4.1.664.2.147.12.1.1.6
The Average Throughput the Port transmitted for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

adTSUIQDayDBUAvgThruputRx		1.3.6.1.4.1.664.2.147.12.1.1.7
The Average Throughput the Port received for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

adTSUIQDayDBUMaxThruputTx		1.3.6.1.4.1.664.2.147.12.1.1.8
The Maximum Throughput the Port transmitted for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayDBUMaxThruputRx		1.3.6.1.4.1.664.2.147.12.1.1.9
The Maximum Throughput the Port received for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayDBUAvgUtilizationTx		1.3.6.1.4.1.664.2.147.12.1.1.10
The Average Utilization the Port transmitted for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

adTSUIQDayDBUAvgUtilizationRx		1.3.6.1.4.1.664.2.147.12.1.1.11
The Average Utilization the Port received for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

adTSUIQDayDBUMaxUtilizationTx		1.3.6.1.4.1.664.2.147.12.1.1.12
The Maximum Utilization the Port transmitted for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayDBUMaxUtilizationRx		1.3.6.1.4.1.664.2.147.12.1.1.13
The Maximum Utilization the Port received for the interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayTimeInDBU		1.3.6.1.4.1.664.2.147.12.1.1.14
Time in seconds the DBU port was active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayDBUCrcErrors		1.3.6.1.4.1.664.2.147.12.1.1.15
Number of frames received with CRC errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayDBUAbortFrames		1.3.6.1.4.1.664.2.147.12.1.1.16
Number of frames received without proper flag termination.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayDBUOctectViolations		1.3.6.1.4.1.664.2.147.12.1.1.17
Number of frames received with a bit count not divisible by eigth.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayDBUDiscardFrames		1.3.6.1.4.1.664.2.147.12.1.1.18
Number of frames discarded by the IQ unit
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayDBULengthErrors		1.3.6.1.4.1.664.2.147.12.1.1.19
Number of frames received that is less than 5 bytes or greater than 4500 bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayDBUEncapsulationErrors		1.3.6.1.4.1.664.2.147.12.1.1.20
Number of frames destined for the IQ IP stack with that does not meet the FRF.3 IA.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQDayDBUUnroutable		1.3.6.1.4.1.664.2.147.12.1.1.21
Number of frames received on a management DLCI destined for the IQ unit and have the wrong IP address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

adTSUIQTrapManagerTable		1.3.6.1.4.1.664.2.147.13.1
The trap manger route table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdTSUIQTrapManagerEntry

adTSUIQTrapManagerEntry		1.3.6.1.4.1.664.2.147.13.1.1
n/a
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdTSUIQTrapManagerEntry

adTSUIQTrapManagerRouteIndex		1.3.6.1.4.1.664.2.147.13.1.1.1
n/a.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adTSUIQTrapManagerRouteIPAddress		1.3.6.1.4.1.664.2.147.13.1.1.2
Sets the Trap Manager IP Address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

adTSUIQTrapManagerRouteDLCI		1.3.6.1.4.1.664.2.147.13.1.1.3
Sets the Trap Manager DLCI. (Range 16 - 1007).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	16..1007

adTSUIQTrapManagerRoutePort		1.3.6.1.4.1.664.2.147.13.1.1.4
Selects the Trap Manager Port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), dtePort(2), networkPort(3), controlPort(4), ethernetPort(5)

adTSUIQNetworkPhysUp		14701
This trap indicates that the physical layer of the network is now up.
TRAP-TYPE

adTSUIQNetworkPhysDown		14702
This trap indicates that the physical layer of the network is now down.
TRAP-TYPE

adTSUIQNetworkLMIUp		14703
This trap indicates that the LMI state of the network is now up.
TRAP-TYPE

adTSUIQNetworkLMIDown		14704
This trap indicates that the LMI state of the network is now down.
TRAP-TYPE

adTSUIQColdStart		14705
This trap indicates that a cold start has occurred.
TRAP-TYPE