ALCATEL-IND1-CONFIG-MGR-MIB
File:
ALCATEL-IND1-CONFIG-MGR-MIB.mib (66990 bytes)
Imported modules
Imported symbols
Defined Values
alcatelIND1ConfigMgrMIB |
1.3.6.1.4.1.6486.801.1.2.1.11.1 |
This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Configuration Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE |
MODULE-IDENTITY |
|
|
|
alcatelIND1ConfigMgrMIBObjects |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1 |
Branch For Configuration Manager Subsystem Managed Objects. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
alcatelIND1ConfigMgrMIBGroups |
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1 |
Branch For Configuration Manager Subsystem Units Of Conformance. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
alcatelIND1ConfigMgrMIBCompliances |
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.2 |
Branch For Configuration Manager Subsystem Compliance Statements. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
configManager |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1 |
OBJECT IDENTIFIER |
|
|
|
configFileName |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.1 |
The name of the configuration file to be
read by the device. The file specified
should be present on the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
SnmpAdminString |
Size(0..45) |
|
configFileAction |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.2 |
Triggers application of the configuration
file specified by the configInputFileName.
A value of checkSyntax causes configInputFile
to be checked for syntax, with no changes to
device configuration. A value of
checkSyntaxAndApply causes the configInputFile
to be applied to the device configuration.A value
of none indicates no action has been triggered. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), checkSyntaxOnly(2), apply(3) |
|
configErrorFileName |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.3 |
The name of the file containing the error
messages generated by the device during file
configuration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SnmpAdminString |
Size(0..255) |
|
configFileStatus |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.4 |
Status of most recent application of configuration
file to the device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
noneAvail(1), inProgress(2), completeNoErrors(3), completeErrors(4) |
|
configFileMode |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.5 |
The verbose mode displays all configuration commands
and errors when the file is applied on the console
screen. Ignored unless set from command line interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), verbose(2) |
|
configTimerFileName |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.6 |
The name of the configuration file to be read later
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
SnmpAdminString |
Size(0..45) |
|
configTimerFileTime |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.7 |
The local time when the configuration file
will be read by the device. This object is
only set if the configInputFile must be applied
at a later time.
The following formats are valid:
MM/DD/YYYY hh:mm
MM/DD/YY hh:mm
MM/DD hh:mm - uses current year if
after current date and time,
next year otherwise.
hh:mm - uses today's date if later
than current time,
tommorow's date otherwise.
where
YY - year (0-38,99)
MM - month (1-12)
DD - day (1-31)
hh - hour (0-23)
mm - minute (0-59) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
SnmpAdminString |
Size(0..16) |
|
configTimerFileStatus |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.8 |
The current status of the ASCII configuration
timer. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
idle(1), pending(2), inProgress(3) |
|
configTimerClear |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.9 |
A set of this object causes the ASCII
configuration timer to be cleared. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotFileName |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.10 |
The name of the configuration snap-shot file
to be generated by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
SnmpAdminString |
Size(0..45) |
|
configSnapshotAction |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.11 |
A set of this object causes the configuration
snap-shot to be generated by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotAllSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.12 |
A set of this object causes
all application configuration data to be
included in the snap-shot file generated by
the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotVlanSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.13 |
A set of this object causes
Vlan configuration data to be
included in the snap-shot file generated by
the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotSpanningTreeSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.14 |
A set of this object causes
Spanning Tree configuration data to be
included in the snap-shot file generated by
the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotQOSSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.15 |
A set of this object causes
QOS configuration data to be included
in the snap-shot file generated by the
the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotIPSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.16 |
A set of this object causes
IP configuration data to be included
in the snap-shot file generated by the
the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotIPXSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.17 |
A set of this object causes
IPX configuration data to be included
in the snap-shot file generated by the
the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotIPMSSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.18 |
A set of this object causes
IPMS configuration data to be included
in the snap-shot file generated by the
the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotAAASelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.19 |
A set of this object causes
AAA configuration data to be included
in the snap-shot file generated by the
the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotSNMPSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.20 |
A set of this object causes
SNMP configuration data to be included
in the snap-shot file generated by the
the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshot8021QSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.21 |
A set of this object causes
802.1Q configuration data to be included
in the snap-shot file generated by the
the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotLinkAggregateSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.22 |
A set of this object causes
link aggregation configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotPortMirrorSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.23 |
A set of this object causes
port mirroring configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotXIPSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.24 |
A set of this object causes
proprietary inter-switch protocol configuration
data to be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotHealthMonitorSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.25 |
A set of this object causes
health monitoring configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotBootPSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.26 |
A set of this object causes
bootp configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotBridgeSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.27 |
A set of this object causes
source-learning configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotChassisSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.28 |
A set of this object causes
the chassis configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotInterfaceSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.29 |
A set of this object causes
ethernet interface configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotPolicySelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.30 |
A set of this object causes
policy manager configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotSessionSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.31 |
A set of this object causes
the user-session configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotServerLoadBalanceSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.32 |
A set of this object causes
server load balancing configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotSystemServiceSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.33 |
A set of this object causes
system services configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotVRRPSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.34 |
A set of this object causes
VRRP configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotWebSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.35 |
A set of this object causes
web manager configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotRIPSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.36 |
A set of this object causes
RIP configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotOSPFSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.37 |
A set of this object causes
OSPF configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotBGPSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.38 |
A set of this object causes
BGP configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotIPRMSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.39 |
A set of this object causes
IPRM routing configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotIPMRSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.40 |
A set of this object causes
IP multicast routing configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotModuleSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.41 |
A set of this object causes
module configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configTechSupportLogAction |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.42 |
A set of this object causes
a tech_support.log file to be created
containing switch information useful to
a technical support group. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notSignificant(0), techSupportBasic(1), techSupportL2(2), techSupportL3(3), techSupportL3Rip(4), techSupportL3Ipx(5), techSupportL3Ospf(6), techSupportL3Bgp(7), techSupportL3Pimsm(8), techSupportL3Mroute(9), techSupportL3Dvmrp(10), techSupportL3IPv6(11), techSupportL3RIPng(12), techSupportL3OSPF3(13), techSupportL3Isis(14), techSupportL3Pim6(15), techSupportL3IPsec(16), techSupportL3Bfd(17) |
|
configWriteMemory |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.43 |
A set of this object causes
the entire switch snap-shot configuration to
be stored in the boot.cfg file in the
current running directory. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configErrorFileMaximum |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.44 |
The maximum number of error files which may be
present on a switch. Each time a new error file
is created, all but the newest configErrorFileMaxNum
error files are deleted. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..25 |
|
configChangeStatus |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.45 |
The current state of the running configuration with respect
to the saved configuration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
identical(1), different(2) |
|
configSnapshotRDPSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.46 |
A set of this object causes
RDP configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotIPv6Select |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.47 |
A set of this object causes
IPv6 configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotRIPngSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.48 |
A set of this object causes
RIPng configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotAtmSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.49 |
A set of this object causes
ATM configuration data to
be included in the snap-shot file generated
by the device. NOT SUPPORTED. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotSonetSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.50 |
A set of this object causes
Sonet configuration data to
be included in the snap-shot file generated
by the device. NOT SUPPORTED. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotNTPSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.51 |
A set of this object causes
NTP configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotPortMappingSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.52 |
A set of this object causes
Port Mapping configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotOSPF3Select |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.53 |
A set of this object causes
OSPF3 configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configWriteMemoryStatus |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.54 |
Status of most recent wwrite memory action. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
noneAvail(1), inProgress(2), completeNoErrors(3), completeErrors(4) |
|
configSnapshotStackSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.55 |
A set of this object causes
STack Manager configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotISISSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.56 |
A set of this object causes
ISIS configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotEOAMSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.57 |
A set of this object causes
Ethernet OAM configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotUDLDSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.58 |
A set of this object causes
UDLD configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotNETSECSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.59 |
A set of this object causes
NETSEC configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotIPsecSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.60 |
A set of this object causes
IP Security configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotBFDSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.61 |
A set of this object causes
BFD configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotMultiChassisSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.62 |
A set of this object causes
MCM configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotErpSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.63 |
A set of this object causes
ERP configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotMPLSSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.64 |
A set of this object causes
MPLS configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotEFMOAMSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.65 |
A set of this object causes
EFMOAM configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotCapabilitySelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.66 |
A set of this object causes
capability manager configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotVfcSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.67 |
A set of this object causes
VFC configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotHaVlanSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.68 |
A set of this object causes
HA VLAN configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotDaUnpSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.69 |
A set of this object causes
DA UNP configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotDHLSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.70 |
A set of this object causes
DHL configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotMVRPSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.71 |
A set of this object causes
MVRP configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotSAASelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.72 |
A set of this object causes
SAA configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotSPBSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.73 |
A set of this object causes
SPB configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotSPBIsisSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.74 |
A set of this object causes
SPB ISIS configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotVirtualChassisSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.75 |
A set of this object causes VCM configuration
data to be included in the snap-shot file
generated by the device. A set of this object
is only valid in standalone mode |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotMplsLdpSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.76 |
A set of this object causes
MPLS LDP configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotVCMSpecific |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.77 |
A set of this object causes
VCM configuration data for the chassis
specified by configSnapshotChassisId to
be included in the snap-shot file generated
by the device A set of this object is only
valid in virtual chassis mode. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotChassisId |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.78 |
A set of this object in combination with
configSnapshotVCMSpecific causes
VCM configuration data for the specified
chassis to be included in the snap-shot
file generated by the device. A set of
this object is only valid in virtual
chassis mode. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2 |
|
configSnapshotEvbSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.79 |
A set of this object causes
EVB configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configConvertConfiguration |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.80 |
A set of this object to virtualChassis is only valid in
standalone mode and causes a virtual chassis snapshot to be
generated from the running configuration. The resulting
vcsetup.cfg and vcboot.cfg files are stored in the directory
specified by configConvertDestinationDirectory. If no directory
is specified the running directory will be used provided the
running directory is not the certified directory. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notSignificant(0), virtualChassis(1) |
|
configConvertConfigurationStatus |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.81 |
Status of most recent convert configuration action. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
noneAvail(1), inProgress(2), completeNoErrors(3), completeErrors(4) |
|
configConvertDestinationDirectory |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.82 |
The destination directory for the files created by the action
of setting the configConvertConfiguration object. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
SnmpAdminString |
Size(0..45) |
|
configConvertReload |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.83 |
A set of this object will initiate a reboot of the
switch as part of the configConvertConfiguration
action. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotAppfpSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.84 |
A set of this object causes
Application Finger Print configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotFipsSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.85 |
A set of this object causes
FIP Snooping configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotLFPSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.86 |
A set of this object causes
LFP configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotPmInterfaceSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.87 |
A set of this object causes
Port Manager Interfaceconfiguration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotAutofabricSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.88 |
A set of this object causes
Autofabric configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotDhcpv6RelaySelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.89 |
A set of this object causes
DHCPv6 Relay configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotSIPSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.90 |
A set of this object causes
Autofabric configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotOpenflowSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.91 |
A set of this object causes
Openflow configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotWlanSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.92 |
A set of this object causes
Wlan configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotDhcpSrvSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.93 |
A set of this object causes
DhcpSrv configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotDPISelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.94 |
A set of this object causes
Dpi configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotMsgSrvSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.95 |
A set of this object causes
MsgSrv configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotAlSrvSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.96 |
A set of this object causes
ActiveLeaseSrv configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
configSnapshotDhcpv6SrvSelect |
1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.97 |
A set of this object causes
Dhcp6Srv configuration data to
be included in the snap-shot file generated
by the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
alcatelIND1ConfigMgrMIBCompliance |
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.2.1 |
Compliance statement for Configuration Manager Subsystem. |
Status: current |
Access: read-write |
MODULE-COMPLIANCE |
|
|
|
configFileGroup |
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.1 |
Collection of objects for file configuration. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
configTimerFileGroup |
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.2 |
Collection of objects for timer file configuration. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
configSnapshotGroup |
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.3 |
Collection of objects for snapshot configuration. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
configTechSupportLogGroup |
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.4 |
Collection of objects for technical support log file. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
configWriteMemoryGroup |
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.5 |
Collection of objects for write memory. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
configConvertConfigurationGroup |
1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.6 |
Collection of objects for write memory. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|