ALCATEL-IND1-DOT1X-MIB

File: ALCATEL-IND1-DOT1X-MIB.mib (50341 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC ALCATEL-IND1-BASE
SNMPv2-CONF IF-MIB SNMP-FRAMEWORK-MIB
IEEE8021-PAE-MIB

Imported symbols

MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE
Integer32 IpAddress DisplayString
MacAddress TimeStamp TEXTUAL-CONVENTION
TruthValue softentIND1Dot1X MODULE-COMPLIANCE
OBJECT-GROUP InterfaceIndex InterfaceIndexOrZero
SnmpAdminString dot1xPaePortNumber

Defined Types

ALADot1xClassificationPolicyType  
This policy type is the classification policy used to classify a device onto the system.
TEXTUAL-CONVENTION    
  INTEGER dotXAuthentication(0), macAuthentication(1), groupMobilityRules(2), vlanId(3), defaultVlan(4), block(5), internalUseOnlyA(6), internalUseOnlyB(7), internalUseOnlyC(8), captivePortalAuthentication(9), captivePortalGroupMobility(10), captivePortalDefaultVlan(11), captivePortalVlanId(12), captivePortalBlock(13), captivePortalUnknown(14), captivePortalUnpAuthSrv(15), captivePortalUnpUsrCfg(16), captivePortalUnpAAArule(17), authServerUNP(18), userConfigUNP(19), aaaRuleUNP(20), aaaAuthSvrDownUNP(21), aaaAuthSvrDownBlock(22)  

ALADot1xAuthenticationType  
The type of authentication used
TEXTUAL-CONVENTION    
  INTEGER noAuthentication(0), dotXAuthentication(1), macAuthentication(2), captivePortal(3)  

ALADot1xAuthenticationResult  
The result of the authentication. If the ALADot1xAuthenticationType of this device is noAuthentication then this object will return notApplicable. If the authentication has not completed then this object will return inProgress.
TEXTUAL-CONVENTION    
  INTEGER notApplicable(0), inProgress(1), success(2), fail(3)  

ALADot1xMacLearntState  
The state of MAC address in the system
TEXTUAL-CONVENTION    
  INTEGER bridging(0), filtering(1), hicInProgress(2), qmrInProgress(3)  

ALADot1xMacQueryType  
The query type of MAC address in the system. This query MAC address type is used to specify which type of MAC address to query from the alaDot1xDeviceStatusTable.
TEXTUAL-CONVENTION    
  INTEGER all(0), supplicant(1), nonSupplicant(2), captivePortal(3)  

ALADot1xDeviceType  
The type of device. Either supplicant or non-supplicant.
TEXTUAL-CONVENTION    
  INTEGER supplicant(1), nonSupplicant(2)  

ALADot1xHicFlag  
Flag to specify whether MAC is classified based on HIC
TEXTUAL-CONVENTION    
  INTEGER enabled(1), disabled(2)  

AlaDot1xPortEntry  
SEQUENCE    
  alaDot1xPortSlotNumber INTEGER
  alaDot1xPortPortNumber INTEGER
  alaDot1xPortMACAddress MacAddress
  alaDot1xPortVlan INTEGER
  alaDot1xPortProtocol INTEGER
  alaDot1xPortUserName DisplayString
  alaDot1xPortState INTEGER
  alaDot1xSupplicantPolicyUsed ALADot1xClassificationPolicyType

AlaDot1xMacEntry  
SEQUENCE    
  alaDot1xMACAddress MacAddress
  alaDot1xMacIfIndex InterfaceIndex
  alaDot1xMacSlotNumber Integer32
  alaDot1xMacPortNumber Integer32
  alaDot1xMacVlan Integer32
  alaDot1xMacProtocol Integer32
  alaDot1xMacUserName DisplayString
  alaDot1xMacState INTEGER
  alaDot1xMacSupplicantPolicyUsed ALADot1xClassificationPolicyType
  alaDot1xHicEnabledMAC ALADot1xHicFlag

AlaDot1xPortLookupEntry  
SEQUENCE    
  alaDot1xPortLookupSlotNumber INTEGER
  alaDot1xPortLookupPortNumber INTEGER
  alaDot1xPortLookupMACAddress MacAddress
  alaDot1xPortLookupInterfaceNumber InterfaceIndex

AlaDot1xNonSupplicantEntry  
SEQUENCE    
  alaDot1xNonSupplicantIntfNum InterfaceIndex
  alaDot1xNonSupplicantMACAddress MacAddress
  alaDot1xNonSupplicantVlanID INTEGER
  alaDot1xNonSupplicantPolicyUsed ALADot1xClassificationPolicyType
  alaDot1xAuthenticationStatus INTEGER
  alaDot1xNonSupplicantHicEnabledMAC ALADot1xHicFlag

AlaDot1xAuthPolicyEntry  
SEQUENCE    
  alaDot1xAuthPolicyIntfNumber InterfaceIndex
  alaDot1xNonSuppPolicy DisplayString
  alaDot1xSuppPolicy DisplayString
  alaDot1xPollingCnt Integer32
  alaDot1xCaptivePortalPolicy DisplayString
  alaDot1xCPortalSessionLimit Integer32
  alaDot1xCPortalRetryCnt Integer32
  alaDot1xSupplicantBypass INTEGER
  alaDot1xSBAllowEAP INTEGER
  alaDot1xCPortalInactivityLogout INTEGER

AlaDot1xDeviceStatusEntry  
SEQUENCE    
  alaDot1xDeviceStatusMacQueryType ALADot1xMacQueryType
  alaDot1xDeviceStatusSlotNumber INTEGER
  alaDot1xDeviceStatusPortNumber INTEGER
  alaDot1xDeviceStatusMACAddress MacAddress
  alaDot1xDeviceStatusDeviceType ALADot1xDeviceType
  alaDot1xDeviceStatusVlan INTEGER
  alaDot1xDeviceStatusIPAddress IpAddress
  alaDot1xDeviceStatusUserName SnmpAdminString
  alaDot1xDeviceStatusProfileUsed SnmpAdminString
  alaDot1xDeviceStatusAuthType ALADot1xAuthenticationType
  alaDot1xDeviceStatusPolicyUsed ALADot1xClassificationPolicyType
  alaDot1xDeviceStatusAuthResult ALADot1xAuthenticationResult
  alaDot1xDeviceStatusMacLearntState ALADot1xMacLearntState
  alaDot1xDeviceStatusTimeLearned TimeStamp
  alaDot1xDeviceStatusCaptivePortalUsed TruthValue
  alaDot1xDeviceStatusHicResult Integer32

AlaPassThroughStatus  
Admin status
TEXTUAL-CONVENTION    
  INTEGER enabled(1), disabled(2)  

Defined Values

alcatelIND1Dot1XMIB 1.3.6.1.4.1.6486.801.1.2.1.30.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): The Port Access Entity module for managing 802.1X for the Birds Of Prey Product Line The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alaIND1Dot1XMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.30.1.1
Branch For 802.1X Subsystem Managed Objects.
Status: current Access: read-write
OBJECT-IDENTITY    

alaIND1Dot1XMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.30.1.2
Branch For 802.1X Subsystem Conformance Information.
Status: current Access: read-write
OBJECT-IDENTITY    

alaIND1Dot1XMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1
Branch For 802.1X Subsystem Units Of Conformance.
Status: current Access: read-write
OBJECT-IDENTITY    

alaDot1xPortTable 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1
A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDot1xPortEntry

alaDot1xPortEntry 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1
TP DO: Add description here
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  AlaDot1xPortEntry  

alaDot1xPortSlotNumber 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.1
The slot that the logical port represented by the dot1xPaePortNumber resides.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

alaDot1xPortPortNumber 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.2
The user port that the logical port represented by the dot1xPaePortNumber resides.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

alaDot1xPortMACAddress 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.3
The MAC address of the supplicant that along with the slot and port uniquely form the logical port represented by the dot1xPaePortNumber.
Status: deprecated Access: read-only
OBJECT-TYPE    
  MacAddress  

alaDot1xPortVlan 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.4
The vlan that the supplicant is authorized to access.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..4096  

alaDot1xPortProtocol 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.5
The protocol that is authorized for the supplicant. This is used in conjunction with the alaDot1xPortVlan object. Supplicant can be authorized to different vlans for different protocol.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..6  

alaDot1xPortUserName 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.6
The user name of the supplicant used for authentication.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString  

alaDot1xPortState 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.7
The State of the port.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuthenticated(8), forceUnauthenticated(9), authenticatedLocally(10)  

alaDot1xSupplicantPolicyUsed 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.8
Classification Policy under which the 802.1x supplicant is learned.
Status: deprecated Access: read-only
OBJECT-TYPE    
  ALADot1xClassificationPolicyType  

alaDot1xMacTable 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4
Provide the list of users currently authenticated into the switch for bridging purpose.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDot1xMacEntry

alaDot1xMacEntry 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1
An entry in the AaaAuthenticatedUserTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDot1xMacEntry  

alaDot1xMACAddress 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.1
The MAC address of the supplicant that along with the slot and port uniquely form the logical port represented by the dot1xPaePortNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

alaDot1xMacIfIndex 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.2
Interface index in which alaDot1xMACAddress was learned.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

alaDot1xMacSlotNumber 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.3
The slot in which alaDot1xMACAddress was learned.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

alaDot1xMacPortNumber 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.4
The user port in which alaDot1xMACAddress was learned.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..48  

alaDot1xMacVlan 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.5
The vlan that the supplicant is authorized to access.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4096  

alaDot1xMacProtocol 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.6
The protocol that is authorized for the supplicant. This is used in conjunction with the alaDot1xMacVlan object. Supplicant can be authorized to different vlans for different protocol.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

alaDot1xMacUserName 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.7
The user name of the supplicant used for authentication.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

alaDot1xMacState 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.8
The State of the port in which the current mac-address was learned.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuthenticated(8), forceUnauthenticated(9), authenticatedLocally(10)  

alaDot1xMacSupplicantPolicyUsed 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.9
Classification Policy under which the 802.1x supplicant is learned.
Status: current Access: read-only
OBJECT-TYPE    
  ALADot1xClassificationPolicyType  

alaDot1xHicEnabledMAC 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.10
Flag to notify that MAC has been classified based on HIC policy
Status: deprecated Access: read-only
OBJECT-TYPE    
  ALADot1xHicFlag  

alaDot1xPortLookupTable 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2
A table of which allows to find the logical port number given the physical slot/port/MAC. An entry appears in this table for each logical port of this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDot1xPortLookupEntry

alaDot1xPortLookupEntry 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2.1
The translation table to look up the dot1xPaePortNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDot1xPortLookupEntry  

alaDot1xPortLookupSlotNumber 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2.1.1
The slot that the logical port represented by the dot1xPaePortNumber resides.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

alaDot1xPortLookupPortNumber 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2.1.2
The physical port that the logical port represented by the dot1xPaePortNumber resides.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..48  

alaDot1xPortLookupMACAddress 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2.1.3
The MAC address of the supplicant that along with the slot and port uniquely form the logical port represented by the dot1xPaePortNumber.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

alaDot1xPortLookupInterfaceNumber 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2.1.4
The ifIndex that represnets the slot and port where the dot1xPaePortNumber resides.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

alaDot1xNonSupplicantTable 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5
A table of non 802.1x supplicants learned on 802.1x authenticated ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDot1xNonSupplicantEntry

alaDot1xNonSupplicantEntry 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1
Non 802.1x supplicant information.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDot1xNonSupplicantEntry  

alaDot1xNonSupplicantIntfNum 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.1
The ifIndex represneting the slot and port where the non 802.1x supplicant is learned.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

alaDot1xNonSupplicantMACAddress 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.2
The MAC address of the non 802.1x supplicant.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

alaDot1xNonSupplicantVlanID 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.3
The Id of the VLAN on which the non 802.1x supplicant is learned.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4096  

alaDot1xNonSupplicantPolicyUsed 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.4
Classification policy under which the non 802.1x supplicant is learned.
Status: current Access: read-only
OBJECT-TYPE    
  ALADot1xClassificationPolicyType  

alaDot1xAuthenticationStatus 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.5
Authentication status of the non 802.1x supplicant.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), inProgress(2), authenticated(3), failed(4), failedTimeout(5), failedNoServer(6), failedNoResources(7)  

alaDot1xNonSupplicantHicEnabledMAC 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.6
Flag to specify whether non supplicant is classified based on HIC.
Status: current Access: read-only
OBJECT-TYPE    
  ALADot1xHicFlag  

alaDot1xAuthPolicyTable 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6
A table of supplicant and non supplicant device classification policies as they are configured on 802.1x authenticated ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDot1xAuthPolicyEntry

alaDot1xAuthPolicyEntry 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1
Device classification policies information.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDot1xAuthPolicyEntry  

alaDot1xAuthPolicyIntfNumber 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.1
The ifIndex that represnets the slot and port where the device classification policies are configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

alaDot1xNonSuppPolicy 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.2
MAC based authentication -> M Group Mobility -> G VLAN ID -> Default VLAN -> D Block -> B Fail -> , Captive Portal -> C Examples: MGD,GB. The default value is B (block). If the string size is zero (0), the default value is used.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

alaDot1xSuppPolicy 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.3
802.1x authentication -> X Group Mobility -> G VLAN ID -> Default VLAN -> D Block -> B Fail -> , Captive Portal -> C Default value: XGD,B. If the string size is zero (0), the default value is used.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

alaDot1xPollingCnt 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.4
Number of retries to poll the end station for EAPoL frame before classifying the end station with group mobility or guest vlan ID configured. If the value is set to zero (0), it indicates a special case where the port will ignore any EAP frame from the client and this will force all devices to the non-supplicant policy for classification.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..99  

alaDot1xCaptivePortalPolicy 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.5
Web authentication -> W Group Mobility -> G VLAN ID -> Default VLAN -> D Block -> B Fail -> , Default value: XGD,B, if string size is zero, the default value is used.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

alaDot1xCPortalSessionLimit 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.6
Captive Portal Session limit is the interval that a Captive Portal user can login. User is to be logged off after the session limit. If the session limit is set to zero (0), it means the session is unlimited, user will not be automatically logged off.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..999  

alaDot1xCPortalRetryCnt 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.7
Number of retries for the Captive Portal user to provide the user credential before the software will classify the user to the failed policy according the the alaDot1xCaptivePortalPolicy.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..999  

alaDot1xSupplicantBypass 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.8
Supplicant Bypass configuration Status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaDot1xSBAllowEAP 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.9
Supplicant Bypass Allow EAP configuration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pass(1), fail(2), noauth(3), none(4)  

alaDot1xCPortalInactivityLogout 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.10
Captive portal inactivity logout entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaDot1xCportalConfig 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7
OBJECT IDENTIFIER    

alaDot1xCPortalIpAddress 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.1
The factory default Captive Portal IP address is 10.123.0.1. If the 10.123.0.0 subnet is already in use, user can change the Captive Portal IP address to another 10.x.0.0 subnet. Only the second octet of the Captive Portal IP address can be changed.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

alaDot1xCPortalProxyURL 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.2
The factory default for Captive Portal working with proxy server url has the key word proxy. If the user's proxy server url does not have the key work proxy, user can use this object to specify the proxy server url. If none is specified this object will return the default value - proxy.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..64)  

alaDot1xCPortalPostAuthSuccessRedirectURL 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.3
Captive Portal's Redirect URL upon successful authentication.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

alaDot1xCPortalPostAuthFailRedirectURL 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.4
Captive Portal's Redirect URL upon failed authentication.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

alaDot1xCPortalDNSKeyword1 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.5
Captive Portal's DNS keyword string.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

alaDot1xCPortalDNSKeyword2 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.6
Captive Portal's DNS keyword string.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

alaDot1xCPortalDNSKeyword3 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.7
Captive Portal's DNS keyword string.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

alaDot1xCPortalDNSKeyword4 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.8
Captive Portal's DNS keyword string.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

alaDot1xCPortalProxyPort 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.9
Captive Portal's user defined proxy port number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

alaDot1xCPortalRedirectString 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.10
Captive Portal redirect url key string.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

alaDot1xDeviceStatusTable 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8
A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDot1xDeviceStatusEntry

alaDot1xDeviceStatusEntry 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1
One entry of the Device Status Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDot1xDeviceStatusEntry  

alaDot1xDeviceStatusMacQueryType 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.1
The type of MAC address to query.
Status: current Access: not-accessible
OBJECT-TYPE    
  ALADot1xMacQueryType  

alaDot1xDeviceStatusSlotNumber 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.2
The slot that the device reporting the status resides.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..16  

alaDot1xDeviceStatusPortNumber 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.3
The user port that the device reporting the status resides.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..48  

alaDot1xDeviceStatusMACAddress 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.4
The MAC address of the device reporting the status.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

alaDot1xDeviceStatusDeviceType 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.5
The type of device. Either supplicant or non-supplicant.
Status: current Access: not-accessible
OBJECT-TYPE    
  ALADot1xDeviceType  

alaDot1xDeviceStatusVlan 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.6
The vlan that the device reporting the status is authorized to access.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4096  

alaDot1xDeviceStatusIPAddress 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.7
The IP address of the device reporting the status.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaDot1xDeviceStatusUserName 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.8
The user name of the device reporting the status.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

alaDot1xDeviceStatusProfileUsed 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.9
The name of the User Network Profile entry used when the device reporting the status is classified.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

alaDot1xDeviceStatusAuthType 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.10
The type of authentication used by the device reporting the status to obtain network access.
Status: current Access: read-only
OBJECT-TYPE    
  ALADot1xAuthenticationType  

alaDot1xDeviceStatusPolicyUsed 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.11
Classification Policy under which the device is learned.
Status: current Access: read-only
OBJECT-TYPE    
  ALADot1xClassificationPolicyType  

alaDot1xDeviceStatusAuthResult 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.12
The State of the port.
Status: current Access: read-only
OBJECT-TYPE    
  ALADot1xAuthenticationResult  

alaDot1xDeviceStatusMacLearntState 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.13
The State of the MAC classified in the switch.
Status: current Access: read-only
OBJECT-TYPE    
  ALADot1xMacLearntState  

alaDot1xDeviceStatusTimeLearned 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.14
The time that the MAC address is learned in the system.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

alaDot1xDeviceStatusCaptivePortalUsed 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.15
The object indicates if the device is classified in the system using Captive Portal. A value of True means that the device has used Captive Portal to authenticate its credential and a value of False means that the device has not used Captive Portal to authenticate its credential.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

alaDot1xDeviceStatusHicResult 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.16
The Hic result of the device reporting the status is authorized to access. Default value is 0, indicates HIC process has not started
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..9  

alaDot1xAdminLogoutParams 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9
OBJECT IDENTIFIER    

alaDot1xAdminLogoutType 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9.1
When this variable is set, the switch is to logout the user based on the logout type. The associated MIB object should be correctly set based on the logout type. If the corresponding MIB object that contain the criteria is not set correctly the switch will not be able to perform the logout operation. After the logout operation is done, the switch will set the corresponding criteria to back to its default value. Also when the logout operation is done, the switch is to set this variable back to zero (0).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noOperation(0), macAddress(1), username(2), networkProfileName(3), interfaceId(4)  

alaDot1xAdminLogoutMacAddress 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9.2
This value is used only if alaDot1xAdminLogoutType is set to MAC address. The default value is set to ff:ff:ff:ff:ff:ff. This well know broadcast MAC address will not be learned by the switch. The switch will reset this to the default value after the logout operation is performed
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

alaDot1xAdminLogoutUserName 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9.3
This value is used only if alaDot1xAdminLogoutType is set to username. The default is a NULL string. The switch will reset this to the default value after the logout operation is performed. User is not allowed to set the value to NULL.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

alaDot1xAdminLogoutNetworkProfileName 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9.4
This value is used only if alaDot1xAdminLogoutType is set to networkprofilename. The default is a NULL string. The switch will reset this to the default value after the logout operation is performed. User is not allowed to set the value to NULL.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

alaDot1xAdminLogoutInterfaceId 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9.5
This value is used only if alaDot1xAdminLogoutType is set to interfaceId. The default value is zero (0). The switch will reset this to the default value after the logout operation is performed.
Status: current Access: read-write
OBJECT-TYPE    
  InterfaceIndexOrZero  

alaDot1xAuthServerTimeout 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.10
OBJECT IDENTIFIER    

alaDot1xAuthSvrTimeoutPolicy 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.10.1
Block -> B User Network Profile -> 'user network profile name' Default value is B.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

alaDot1xAuthSvrTimeoutReAuthPeriod 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.10.2
This is the time interval in second that the supplicant is to be classified according to the Auth Server Down Policy (alaDot1xAuthServerTimeoutPolicy). When this time is expired, the supplicant will be prompted to re-authenticate and see if the Auth Server is back up. The default value is 30 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30..9999  

alaDot1xAuthSvrTimeoutStatus 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.10.3
This is object is to enable or disable the use of alaDot1xAuthSvrTimeoutPolicy and alaDot1xAuthSvrTimeoutReAuthPeriod. Default is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaPassthroughConfig 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.11
OBJECT IDENTIFIER    

alaDot1xPassthroughStatus 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.11.1
Passthrough of 802.1x packets. Force the 802.1x packet to flood in the VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  AlaPassThroughStatus  

alaAvlanPassthroughStatus 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.11.2
Passthrough of AVLAN packets. Force the AVLAN packet to flood in the VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  AlaPassThroughStatus  

alaCportalPassthroughStatus 1.3.6.1.4.1.6486.801.1.2.1.30.1.1.11.3
Passthrough of CAPITIVE packets. Force the AVLAN packet to flood in the VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  AlaPassThroughStatus  

alaIND1Dot1XMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.30.1.2.2
Compliance statement for Alcatel 802.1x.
Status: current Access: read-write
MODULE-COMPLIANCE    

alaINDDot1XPortGroup 1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.1
Collection of 802.1x objects for port status.
Status: current Access: read-write
OBJECT-GROUP    

alaDot1xPortLookupGroup 1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.2
Collection of 802.1x objects for port lookup.
Status: current Access: read-write
OBJECT-GROUP    

alaINDDot1XPolicyGroup 1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.3
Collection of 802.1x objects for supplicant and non-supplicant policies.
Status: current Access: read-write
OBJECT-GROUP    

alaINDDot1XDeviceStatusGroup 1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.4
Collection of 802.1x objects for the status of the devices on an 802.1X enable port.
Status: current Access: read-write
OBJECT-GROUP    

alaDot1xAuthSvrTimeoutGroup 1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.5
Collection of 802.1x objects for the Authentication Server Timeout.
Status: current Access: read-write
OBJECT-GROUP    

alaPassthroughConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.6
Status of passthrough for 802.1x and avlan configuration in devices.
Status: current Access: read-write
OBJECT-GROUP    

alaDot1xAdminLogoutParamsGroup 1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.7
Dot1x Admin Logout Parameters group.
Status: current Access: read-write
OBJECT-GROUP    

alaDot1xNonSupplicantEntryGroup 1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.8
non 802.1x supplicants learned on 802.1x authenticated ports.
Status: current Access: read-write
OBJECT-GROUP    

alaDot1xCportalConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.9
Captive portal Config Group.
Status: current Access: read-write
OBJECT-GROUP    

alaDot1xMacEntryGroup 1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1.10
Captive portal Config Group.
Status: current Access: read-write
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor