ALCATEL-IND1-IP-MIB

File: ALCATEL-IND1-IP-MIB.mib (60354 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMP-FRAMEWORK-MIB
IP-MIB IP-FORWARD-MIB SNMPv2-CONF
ALCATEL-IND1-BASE INET-ADDRESS-MIB IF-MIB

Imported symbols

NOTIFICATION-TYPE MODULE-IDENTITY OBJECT-IDENTITY
OBJECT-TYPE Integer32 Counter32
IpAddress Unsigned32 PhysAddress
RowStatus MacAddress TimeStamp
SnmpAdminString ipNetToMediaIfIndex ipNetToMediaNetAddress
ipNetToMediaEntry ipCidrRouteEntry MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP softentIND1Ip
InetAddressType InetAddress ifIndex
InterfaceIndexOrZero

Defined Types

AlaIpNetToMediaEntry  
SEQUENCE    
  alaIpNetToMediaPhysAddress PhysAddress
  alaIpNetToMediaProxy INTEGER
  alaIpNetToMediaVrrp INTEGER
  alaIpNetToMediaAuth INTEGER
  alaIpNetToMediaName SnmpAdminString

AlaDoSEntry  
SEQUENCE    
  alaDoSType INTEGER
  alaDoSDetected Counter32
  alaDoSIp IpAddress
  alaDoSMac MacAddress
  alaDoSSlot Integer32
  alaDoSPort Integer32
  alaDoSStatus INTEGER
  alaDoSChassisId Integer32

AlaDoSArpPoisonEntry  
SEQUENCE    
  alaDoSArpPoisonIpAddr IpAddress
  alaDoSArpPoisonDetected Counter32
  alaDoSArpPoisonRowStatus RowStatus

IpNetToMediaAugEntry  
SEQUENCE    
  ipNetToMediaSlot Integer32
  ipNetToMediaPort Integer32
  ipNetToMediaName SnmpAdminString
  ipNetToMediaChassisId Integer32

IpCidrRouteAugEntry  
SEQUENCE    
  ipCidrRouteScope INTEGER

AlaIcmpCtrlEntry  
SEQUENCE    
  alaIcmpCtrlType Integer32
  alaIcmpCtrlCode Integer32
  alaIcmpCtrlStatus INTEGER
  alaIcmpCtrlPktGap Integer32

AlaIpRouteSumEntry  
SEQUENCE    
  alaIpRouteProtocol INTEGER
  alaIpRouteCount Integer32

AlaIpArpFilterEntry  
SEQUENCE    
  alaIpArpFilterIpAddr IpAddress
  alaIpArpFilterIpMask IpAddress
  alaIpArpFilterVlan Integer32
  alaIpArpFilterType INTEGER
  alaIpArpFilterMode INTEGER
  alaIpArpFilterRowStatus RowStatus

AlaIpServiceEntry  
SEQUENCE    
  alaIpServiceType INTEGER
  alaIpServicePort Integer32
  alaIpServiceStatus INTEGER

AlaIpPortServiceEntry  
SEQUENCE    
  alaIpPortServicePort Integer32
  alaIpPortServiceStatus INTEGER

AlaIpInterfaceEntry  
SEQUENCE    
  alaIpInterfaceName SnmpAdminString
  alaIpInterfaceAddress IpAddress
  alaIpInterfaceMask IpAddress
  alaIpInterfaceAdminState INTEGER
  alaIpInterfaceDeviceType INTEGER
  alaIpInterfaceVlanID Integer32
  alaIpInterfaceIpForward INTEGER
  alaIpInterfaceEncap INTEGER
  alaIpInterfaceMtu Unsigned32
  alaIpInterfaceLocalProxyArp INTEGER
  alaIpInterfacePrimCfg INTEGER
  alaIpInterfaceOperState INTEGER
  alaIpInterfaceOperReason INTEGER
  alaIpInterfaceRouterMac MacAddress
  alaIpInterfaceBcastAddr IpAddress
  alaIpInterfacePrimAct INTEGER
  alaIpInterfaceRemoteAddr IpAddress
  alaIpInterfaceTunnelSrcAddressType InetAddressType
  alaIpInterfaceTunnelSrc InetAddress
  alaIpInterfaceTunnelDstAddressType InetAddressType
  alaIpInterfaceTunnelDst InetAddress
  alaIpInterfaceVipAddress IpAddress
  alaIpInterfaceDhcpStatus INTEGER
  alaIpInterfaceDhcpIpRelease INTEGER
  alaIpInterfaceDhcpIpRenew INTEGER
  alaIpInterfaceDhcpOption60String SnmpAdminString

AlaIpItfConfigEntry  
SEQUENCE    
  alaIpItfConfigName SnmpAdminString
  alaIpItfConfigIfIndex InterfaceIndexOrZero
  alaIpItfConfigRowStatus RowStatus

Defined Values

alcatelIND1IPMIB 1.3.6.1.4.1.6486.801.1.2.1.23.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary IP MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2006 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1IPMIBNotifications 1.3.6.1.4.1.6486.801.1.2.1.23.1.0
Branch For IP MIB Subsystem Notifications.
Status: current Access: read-only
OBJECT-IDENTITY    

alcatelIND1IPMIBObjects 1.3.6.1.4.1.6486.801.1.2.1.23.1.1
OBJECT IDENTIFIER    

alaIpConfig 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.1
OBJECT IDENTIFIER    

alaIpClearArpCache 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.1.1
Clear dynamic ARP entries from ARP cache.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1)  

alaIpDirectedBroadcast 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.1.2
The indication of whether this router is forwarding IP directed broadcasts
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(0)  

alaIpClearArpFilter 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.1.3
Clear ARP filters entries.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1)  

alaIpNetToMediaTable 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.2
A table of ARP flags, expansion to ipNetToMediaTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaIpNetToMediaEntry

alaIpNetToMediaEntry 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.2.1
An entry in alaIpToMediaTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaIpNetToMediaEntry  

alaIpNetToMediaPhysAddress 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.2.1.1
The media-dependent `physical' address.
Status: current Access: read-write
OBJECT-TYPE    
  PhysAddress  

alaIpNetToMediaProxy 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.2.1.2
Proxy ARP flag
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

alaIpNetToMediaVrrp 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.2.1.3
VRRP ARP flag
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

alaIpNetToMediaAuth 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.2.1.4
Authentication VLAN ARP flags
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

alaIpNetToMediaName 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.2.1.5
Name of the entry.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..31)  

alaDoSConfig 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3
OBJECT IDENTIFIER    

alaDoSTable 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1
Table of DoS (denial of service) attacks detected
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDoSEntry

alaDoSEntry 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1
An entry in the alaDoStable
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDoSEntry  

alaDoSType 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.1
index field for the alaDoSTable. Note: tcpsyn, smurf, pepsi and teardropBonkBoink are deprecated.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER portscan(0), tcpsyn(1), pingofdeath(2), smurf(3), pepsi(4), land(5), teardropBonkBoink(6), loopbacksrcip(7), invalidip(8), mcastmismatch(9), ucastipmcastmac(10), pingattack(11), arpattack(12), arppoison(13)  

alaDoSDetected 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.2
Number of attacks detected
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Counter32  

alaDoSIp 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.3
Source IP address from recent suspect packet.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

alaDoSMac 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.4
Source MAC address from recent suspect packet.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

alaDoSSlot 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.5
Slot on which recent suspect packet was received.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

alaDoSPort 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.6
Port on which recent suspect packet was received.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

alaDoSStatus 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.7
enable/disable DoS attack Detection
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaDoSChassisId 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.8
Chassis on which recent suspect packet was received.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

alaDoSPortScanClosePortPenalty 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.2
Penalty points added to the total port scan penalty value when a TCP/UDP packet destinated to a closed port is received.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

alaDoSPortScanTcpOpenPortPenalty 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.3
Penalty points added to the total port scan penalty value when a TCP SYN/FIN packet destinated to a open TCP port is received. No difference between legal TCP packet and port scan packet.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

alaDoSPortScanUdpOpenPortPenalty 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.4
Penalty points added to the total port scan penalty value when a UDP packet destinated to a open UDP port is received. No difference between legal UDP packet and port scan packet.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

alaDoSPortScanTotalPenalty 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.5
Total port scan penalty value accumulated at present time
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alaDoSPortScanThreshold 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.6
Threshold port scan penalty value. If the total port scan penalty value exceeds this value, a port scan attack is recorded
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

alaDoSPortScanDecay 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.7
Decay speed for the total port scan penalty value. The penalty value is reduced by a factor of the decay value every minute
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

alaDoSTrapCntl 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.8
Indicates whether the switch will generate SNMP traps for alaDoSTraps. 'Enabled' results in SNMP traps; 'disabled', no traps are sent.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaDoSARPRate 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.9
Rate of ARP Requests, which if exceeded, an ARP Flood attack is detected.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..500  

alaDoSPingRate 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.10
Rate of ICMP Requests, which if exceeded, a Ping Overload attack is detected.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10000  

alaDoSArpPoisonTable 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.11
A list of IP addresses for which periodic ARP Requests are to be generated, and from which if an ARP Packet is received, an ARP Poison Attack is detected.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaDoSArpPoisonEntry

alaDoSArpPoisonEntry 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.11.1
An entry in the alaDoSArpPoisonTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaDoSArpPoisonEntry  

alaDoSArpPoisonIpAddr 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.11.1.1
The IP address from which an ARP packet is considered an ARP Poison attack.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

alaDoSArpPoisonDetected 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.11.1.2
Number of ARP Poison attacks detected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alaDoSArpPoisonRowStatus 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.11.1.3
enable/disable ARP Poisoning for this IP
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipNetToMediaAugTable 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.4
slot/port expansion to ipNetToMediaTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpNetToMediaAugEntry

ipNetToMediaAugEntry 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.4.1
An entry in ipNetToMediaAugTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpNetToMediaAugEntry  

ipNetToMediaSlot 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.4.1.1
Slot associated with address translation. An address translation not associated with a slot/port pair will have ipNetToMediaSlot equal to zero and ipNetToMediaPort equal to zero. An address associated with an Ethernet Management Port (EMP) will have ipNetToMediaSlot equal to zero and ipNetToMediaPort equal to -1. An address associated with a link agg port will have ipNetToMediaSlot equal to zero and ipNetToMediaPort equal to the link agg id.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ipNetToMediaPort 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.4.1.2
Port associated with address translation. An address translation not associated with a slot/port pair will have ipNetToMediaSlot equal to zero and ipNetToMediaPort equal to zero. An address associated with an Ethernet Management Port(EMP) will have ipNetToMediaSlot equal to zero and ipNetToMediaPort equal to -1. An address associated with a link agg port will have ipNetToMediaSlot equal to zero and ipNetToMediaPort equal to the link agg id.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ipNetToMediaName 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.4.1.3
Name of the entry.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..31)  

ipNetToMediaChassisId 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.4.1.4
Chassis Id associated with address translation.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

alaDoSTrap 1.3.6.1.4.1.6486.801.1.2.1.23.1.0.1
The DoS trap indicates that the sending agent has received DoS attack
Status: current Access: read-write
NOTIFICATION-TYPE    

trafficEventTrapObjs 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.5
OBJECT IDENTIFIER    

pktDrop 1.3.6.1.4.1.6486.801.1.2.1.23.1.0.2
The pktDrop trap indicates that the sending agent has dropped certain packets (to blocked IP ports, from spoofed addresses, etc).
Status: current Access: read-write
NOTIFICATION-TYPE    

pktDropType 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.5.1
Reason index for why this packet was dropped
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER spoofedIp(0), toBlockedPort(1), rulematchTriggeredPortDisable(2), spoofTriggeredUserPortDisable(3), bpduTriggeredUserPortDisable(4), bgpTriggeredUserPortDisable(5), ospfTriggeredUserPortDisable(6), ripTriggeredUserPortDisable(7), vrrpTriggeredUserPortDisable(8)  

pktDropIfIndex 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.5.2
Interface index (if_index) of ingress port of this dropped pkt
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InterfaceIndexOrZero  

pktDropCount 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.5.3
The # of pkt drops (within a configured time interval) of this pktDropType that triggered this particular trap instance
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

pktDropFrag 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.5.4
<= 512 bytes of the dropped pkt (dsmac[12], tag[4], etype[2], payload[..512] (0 if DropCount only)
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

ipCidrRouteAugTable 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.6
NI/EMP flag expansion to ipCidrRouteTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCidrRouteAugEntry

ipCidrRouteAugEntry 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.6.1
An entry in ipCidrRouteAugTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpCidrRouteAugEntry  

ipCidrRouteScope 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.6.1.1
Indicate the route is NI route or EMP route
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER niroute(1), emproute(2)  

alaIcmpCtrlTable 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.7
Table to control ICMP message generation from the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaIcmpCtrlEntry

alaIcmpCtrlEntry 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.7.1
An entry in the alaIcmpCtrlTable
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaIcmpCtrlEntry  

alaIcmpCtrlType 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.7.1.1
ICMP message type
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..18  

alaIcmpCtrlCode 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.7.1.2
ICMP message code
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..15  

alaIcmpCtrlStatus 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.7.1.3
enable/disable ICMP message generation
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaIcmpCtrlPktGap 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.7.1.4
Minimum packet gap in microseconds between the two successive ICMP messages with the same type and code
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

alaIpRouteSumTable 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.9
IP route summary table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaIpRouteSumEntry

alaIpRouteSumEntry 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.9.1
An entry in the alaIpRouteSumTable
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaIpRouteSumEntry  

alaIpRouteProtocol 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.9.1.1
IP route protocol
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER total(1), local(2), netmgmt(3), rip(4), isis(5), ospf(6), bgp(7), other(8)  

alaIpRouteCount 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.9.1.2
IP route count
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

alaIcmpCtrl 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.10
OBJECT IDENTIFIER    

alaIcmpAllMsgStatus 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.10.1
Enable/disable all ICMP messages on the switch. On set operation, only enabled(1)/disabled(2) is allowed. Other(3) will be returned in get operation, if not all ICMP messages are enabled and not all ICMP messages are disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), other(3)  

alaIpArpFilterTable 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11
A list of IP addresses for ARP to ignore.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaIpArpFilterEntry

alaIpArpFilterEntry 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11.1
An entry in alaIpArpFilterTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaIpArpFilterEntry  

alaIpArpFilterIpAddr 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11.1.1
The IP address to block ARP responses.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

alaIpArpFilterIpMask 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11.1.2
The IP address mask to block ARP responses.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

alaIpArpFilterVlan 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11.1.3
Vlan for filter. 0 disablesP
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4094  

alaIpArpFilterType 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11.1.4
This indicates which parameter of the ARP packet to filter on.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER target(1), sender(2)  

alaIpArpFilterMode 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11.1.5
allow/block ARP for this filter entry
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER allow(1), block(2)  

alaIpArpFilterRowStatus 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11.1.6
enable/disable ARP block for this IP
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaIpServiceTable 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12
Table to enable/disable IP services on switch
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaIpServiceEntry

alaIpServiceEntry 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12.1
An entry in alaIpServiceTable
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaIpServiceEntry  

alaIpServiceType 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12.1.1
IP service type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ftp(1), ssh(2), telnet(3), http(4), ntp(5), snmp(6), https(7)  

alaIpServicePort 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12.1.2
IP service port. To modify the default port, use corresponding MIB attribute below: - ftp : alaIpFtpPort from alaIpFtpConfig in ALCATEL-IND1-IP-MIB.mib - ssh : alaIpSshPort from alaIpSshConfig in ALCATEL-IND1-IP-MIB.mib - telnet : alaIpTelnetPort from alaIpTelnetConfig in ALCATEL-IND1-IP-MIB.mib - http : alaIND1WebMgtHttpPort from alcatelIND1WebMgtMIBObjects in ALCATEL-IND1-WEBMGT-MIB.mib - ntp : can't be modified - snmp : can't be modified - https : alaIND1WebMgtHttpsPort from alcatelIND1WebMgtMIBObjects in ALCATEL-IND1-WEBMGT-MIB.mib
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

alaIpServiceStatus 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12.1.3
When read, returns enabled if service and port are enabled, and returns disabled otherwise. When written, enables/disables service and port (although snmp is never fully shut down; if disabled in some VRF, it will run in the default VRF). Note that that http, https, and ntp here are read-only; use alternatives described below to enable/disable service. If you want to block packet and shut down service, use corresponding MIB attribute below: - ftp : alaIpFtpAdminStatus from alaIpFtpConfig in ALCATEL-IND1-IP-MIB.mib - ssh : alaIpSshAdminStatus from alaIpSshConfig in ALCATEL-IND1-IP-MIB.mib - telnet : alaIpTelnetAdminStatus from alaIpTelnetConfig in ALCATEL-IND1-IP-MIB.mib - http enable : alaIND1WebMgtAdminStatus from alcatelIND1WebMgtMIBObjects in ALCATEL-IND1-WEBMGT-MIB.mib - http disable : alaIND1WebMgtServerStatus from alcatelIND1WebMgtMIBObjects in ALCATEL-IND1-WEBMGT-MIB.mib - ntp : alaIpNtpVrfName (in this mib), and alaNtpEnable and alaNtpBroadcastEnable from alaNtpConfig in ALCATEL-IND1-NTP-MIB.mib - snmp : [no alternative -- use this MIB object] - https : same as http
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), other(3)  

alaIpPortServiceTable 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.13
Table to enable/disable IP services by port on switch
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaIpPortServiceEntry

alaIpPortServiceEntry 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.13.1
An entry in alaIpPortServiceTable
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaIpPortServiceEntry  

alaIpPortServicePort 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.13.1.1
IP service port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

alaIpPortServiceStatus 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.13.1.2
enable/disable IP service
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaIpInterfaceTable 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14
A list of IP interfaces in this switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaIpInterfaceEntry

alaIpInterfaceEntry 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1
An IP interface entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaIpInterfaceEntry  

alaIpInterfaceName 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.1
IP interface name.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

alaIpInterfaceAddress 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.2
IP address for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

alaIpInterfaceMask 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.3
IP mask for this IP interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

alaIpInterfaceAdminState 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.4
Administrative state of the IP interface, independent of the state of the underlying device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaIpInterfaceDeviceType 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.5
The type of device to which the IP interface is bound.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unbound(0), vlan(1), emp(2), loopback(3), greTunnel(4), ipipTunnel(5)  

alaIpInterfaceVlanID 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.6
The VLAN to which the interface is bound; 0 if unbound.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4094  

alaIpInterfaceIpForward 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.7
IP interface forwarding status(disabled = ip host only).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaIpInterfaceEncap 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.8
IP router port encapsulation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ethernet2(1), snap(2)  

alaIpInterfaceMtu 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.9
IP interface's maximum transmission unit (MTU).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

alaIpInterfaceLocalProxyArp 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.10
Local Proxy ARP status on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alaIpInterfacePrimCfg 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.11
Primary interface configuration status for this interface. If set to true, this interface will be used as the default interface for the VLAN on which it resides when possible.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

alaIpInterfaceOperState 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.12
Operational state of the IP interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

alaIpInterfaceOperReason 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.13
The reason the operational state is down.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER interfaceUp(0), adminDown(1), unbound(2), deviceDown(3), noSuchDevice(4), noRouterMac(5), tunnelSrcInvalid(6), tunnelDstUnreachable(7), noVipAddress(8)  

alaIpInterfaceRouterMac 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.14
The router MAC for this IP interface.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

alaIpInterfaceBcastAddr 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.15
Broadcast address for this IP interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

alaIpInterfacePrimAct 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.16
Actual primary interface status for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

alaIpInterfaceRemoteAddr 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.17
Peer address for this IP interface.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

alaIpInterfaceTunnelSrcAddressType 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.18
The address type of the tunnel source network address. Only type InetAddressIPv4 (1) is supported.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

alaIpInterfaceTunnelSrc 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.19
Source network address for tunnel.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

alaIpInterfaceTunnelDstAddressType 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.20
The address type of the tunnel destination network address. Only type InetAddressIPv4 (1) is supported.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

alaIpInterfaceTunnelDst 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.21
Destination network address for tunnel.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

alaIpInterfaceVipAddress 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.22
Virtual IP address for this interface when part of a multi-chass configuration.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

alaIpInterfaceDhcpStatus 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.23
DHCP status of the DHCP Client IP interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER discovery(1), active(2), timeout(3)  

alaIpInterfaceDhcpIpRelease 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.24
To do an IP address release if dynamically assigned address
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaIpInterfaceDhcpIpRenew 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.25
To do an IP address renew if dynamically assigned address
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaIpInterfaceDhcpOption60String 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.26
The value of option-60 filed that should be inserted in DHCP discover/request packet if configured.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..63)  

alaIpItfConfigTable 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.15
Table used to configure a new IP interface with an IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlaIpItfConfigEntry

alaIpItfConfigEntry 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.15.1
An IP interface entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlaIpItfConfigEntry  

alaIpItfConfigName 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.15.1.1
The name for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

alaIpItfConfigIfIndex 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.15.1.2
The ifIndex for this interface. It is only a valid ifIndex value when the value for alaIpInterfaceRowStatus is active.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

alaIpItfConfigRowStatus 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.15.1.3
This object is used to create a new IP interface or delete an existing interface. It should be set to createAndGo to create an entry, or destroy to delete an existing entry. A valid ifIndex value for an IP interface is allocated when a row is created in this table. The successful allocation of the ifIndex value is noted by the state of the new row becoming active.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

alaIpFtpConfig 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.16
OBJECT IDENTIFIER    

alaIpFtpAdminStatus 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.16.1
Indicates whether the FTP service is enabled on the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaIpFtpPort 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.16.2
The user configurable TCP port for switch's ftp access. Default is 21.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 21 | 1024..65535  

alaIpSshConfig 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.17
OBJECT IDENTIFIER    

alaIpSshAdminStatus 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.17.1
Indicates whether the SSH service is enabled on the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaIpSshPort 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.17.2
The user configurable TCP port for switch's ssh access. Default is 22.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 22 | 1024..65535  

alaIpSshPubKeyEnforceAdminStatus 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.17.3
Indicates whether the Public Key Authentication is enforced on the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaIpTelnetConfig 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.18
OBJECT IDENTIFIER    

alaIpTelnetAdminStatus 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.18.1
Indicates whether the TELNET service is enabled on the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

alaIpTelnetPort 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.18.2
The user configurable TCP port for switch's telnet access. Default is 23.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 23 | 1024..65535  

alaIpDhcpHostIdentifierObjects 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19
OBJECT IDENTIFIER    

alaIpDhcpServerAddressType 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19.1
DHCP Server IP address Type. Currently ipv4(1) is supported.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

alaIpDhcpServerAddress 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19.2
DHCP Server IP address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

alaIpDhcpRouterAddressType 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19.3
DHCP Router IP address Type. Currently ipv4(1) is supported.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

alaIpDhcpRouterAddress 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19.4
DHCP Router IP address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

alaIpDhcpHostName 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19.5
DHCP Server assigned host name.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(1..255)  

alaIpDhcpClientLeaseObtained 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19.6
DHCP IP address lease obtained time. If no DHCP client exists this object contains a zero value
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

alaIpDhcpClientLeaseExpires 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19.7
DHCP IP address lease expiry time.If no DHCP client exists this object contains a zero value
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

alaIpNtpConfig 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.20
OBJECT IDENTIFIER    

alaIpNtpVrfName 1.3.6.1.4.1.6486.801.1.2.1.23.1.1.20.1
Name of the VRF used by the NTP daemon.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

alcatelIND1IPMIBConformance 1.3.6.1.4.1.6486.801.1.2.1.23.1.2
OBJECT IDENTIFIER    

alcatelIND1IPMIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.1
OBJECT IDENTIFIER    

alcatelIND1IPMIBGroups 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2
OBJECT IDENTIFIER    

alaIpCompliance 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.1.1
The compliance statement for switches with Alcatel IP stack and implementing ALCATEL-IND1-IP-MIB.
Status: current Access: read-write
MODULE-COMPLIANCE    

alaIpConfigGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.1
A collection of objects to support management of configuration parameters of Alcatel IP stack.
Status: current Access: read-write
OBJECT-GROUP    

alaIpNetToMediaGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.2
A collection of objects to support management of configuration parameters of Alcatel IP Net to Media stack.
Status: current Access: read-write
OBJECT-GROUP    

alaDoSGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.3
A collection of objects to support Notification for DoS attack.
Status: current Access: read-write
OBJECT-GROUP    

alaPortScanGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.4
A collection of objects to support Notification for Port Scan DoS attack.
Status: current Access: read-write
OBJECT-GROUP    

alaArpPingGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.5
A collection of objects to support Notification for Arp or Ping DoS attack.
Status: current Access: read-write
OBJECT-GROUP    

alaArpPoisonGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.6
A collection of objects to support DoS Arp Poison Table.
Status: current Access: read-write
OBJECT-GROUP    

alaIpNetToMediaAugGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.7
A collection of objects to support management of configuration parameters of Alcatel IP Net to Media Augmented stack.
Status: current Access: read-write
OBJECT-GROUP    

alaPktDropGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.8
A collection of objects to support Packet Drop Notification objects.
Status: current Access: read-write
OBJECT-GROUP    

alaIpCidrAugGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.9
A collection of objects to support management of configuration parameters of Alcatel IP Cidr Augmented stack.
Status: current Access: read-write
OBJECT-GROUP    

alaIcmpCtrlGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.10
A collection of objects to support management of configuration parameters of Alcatel Icmp Ctrl stack.
Status: current Access: read-write
OBJECT-GROUP    

alaIpRouteSumGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.11
A collection of objects to support management of configuration parameters of Alcatel Ip Route Sum stack.
Status: current Access: read-write
OBJECT-GROUP    

alaIpArpFilterGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.12
A collection of objects to support management of configuration parameters of Alcatel Ip Arp Filter stack.
Status: current Access: read-write
OBJECT-GROUP    

alaIpServiceTypeGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.13
A collection of objects to support management of configuration parameters of Alcatel Ip Service Type stack.
Status: current Access: read-write
OBJECT-GROUP    

alaIpPortServiceTypeGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.14
A collection of objects to support management of configuration parameters of Alcatel Ip Port Service Type stack.
Status: current Access: read-write
OBJECT-GROUP    

alaIpInterfaceGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.15
A collection of objects to support management of configuration parameters of Alcatel IP Interface stack.
Status: current Access: read-write
OBJECT-GROUP    

alaIpItfGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.16
A collection of objects to support management of configuration parameters of Alcatel Ip Itf stack.
Status: current Access: read-write
OBJECT-GROUP    

alaIpFtpGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.17
A collection of objects to support management of ftp configuration.
Status: current Access: read-write
OBJECT-GROUP    

alaIpSshGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.18
A collection of objects to support management of ssh configuration.
Status: current Access: read-write
OBJECT-GROUP    

alaIpTelnetGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.19
A collection of objects to support management of telnet configuration.
Status: current Access: read-write
OBJECT-GROUP    

alaIpNotificationGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.20
Collection of notifications for IP MIB.
Status: current Access: read-write
NOTIFICATION-GROUP    

alaIpDhcpHostIdentifierGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.21
A collection of objects to support display of DHCP Client details.
Status: current Access: read-write
OBJECT-GROUP    

alaIpNtpGroup 1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.22
A collection of objects to support management of ntp configuration.
Status: current Access: read-write
OBJECT-GROUP