ALCATEL-IND1-OSPF-MIB
File:
ALCATEL-IND1-OSPF-MIB.mib (98380 bytes)
Imported modules
Imported symbols
Defined Types
AlaAuthenticationEncryptKey |
|
The authentication encryption key that is used to decypher
RIP simple passwords. |
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
Size(16) |
|
AlaOspfRedistProtoEntry |
|
SEQUENCE |
|
|
|
|
alaOspfRedistProtoId |
INTEGER |
|
|
alaOspfRedistProtoSubnets |
INTEGER |
|
|
alaOspfRedistProtoMetricType |
INTEGER |
|
|
alaOspfRedistProtoMetric |
INTEGER |
|
|
alaOspfRedistProtoStatus |
RowStatus |
|
|
alaOspfRedistProtoRouteTag |
Counter32 |
|
AlaOspfRouteEntry |
|
SEQUENCE |
|
|
|
|
alaOspfRouteDest |
IpAddress |
|
|
alaOspfRouteMask |
IpAddress |
|
|
alaOspfRouteTos |
INTEGER |
|
|
alaOspfRouteNextHop |
IpAddress |
|
|
alaOspfRouteIfIndex |
INTEGER |
|
|
alaOspfRouteType |
INTEGER |
|
|
alaOspfRouteAge |
TimeTicks |
|
|
alaOspfRouteTag |
INTEGER |
|
|
alaOspfRouteMetric1 |
INTEGER |
|
|
alaOspfRouteMetric2 |
INTEGER |
|
|
alaOspfRouteStatus |
RowStatus |
|
AlaOspfBdrRouterEntry |
|
SEQUENCE |
|
|
|
|
alaOspfBdrRouterAreaId |
IpAddress |
|
|
alaOspfBdrRouterId |
IpAddress |
|
|
alaOspfBdrRouterTos |
INTEGER |
|
|
alaOspfBdrRouterNextHop |
IpAddress |
|
|
alaOspfBdrRouterIfIndex |
INTEGER |
|
|
alaOspfBdrRouterType |
INTEGER |
|
|
alaOspfBdrRouterAge |
TimeTicks |
|
|
alaOspfBdrRouterMetric |
INTEGER |
|
|
alaOspfBdrRouterStatus |
RowStatus |
|
AlaOspfRedistRouteEntry |
|
SEQUENCE |
|
|
|
|
alaOspfRedistRouteProto |
INTEGER |
|
|
alaOspfRedistRouteDest |
IpAddress |
|
|
alaOspfRedistRouteMask |
IpAddress |
|
|
alaOspfRedistRouteMetric |
INTEGER |
|
|
alaOspfRedistRouteControl |
INTEGER |
|
|
alaOspfRedistRouteTagMatch |
INTEGER |
|
|
alaOspfRedistRouteEffect |
INTEGER |
|
|
alaOspfRedistRouteStatus |
RowStatus |
|
AlaOspfIfMd5Entry |
|
SEQUENCE |
|
|
|
|
alaOspfIfMd5IpAddress |
IpAddress |
|
|
alaOspfIfMd5KeyId |
INTEGER |
|
|
alaOspfIfMd5Key |
OCTET STRING |
|
|
alaOspfIfMd5KeyStartAccept |
TimeTicks |
|
|
alaOspfIfMd5KeyStopAccept |
TimeTicks |
|
|
alaOspfIfMd5KeyStartGenerate |
TimeTicks |
|
|
alaOspfIfMd5KeyStopGenerate |
TimeTicks |
|
|
alaOspfIfMd5RowStatus |
RowStatus |
|
|
alaOspfIfMd5EncryptKey |
AlaAuthenticationEncryptKey |
|
AlaOspfIfAugEntry |
|
SEQUENCE |
|
|
|
|
alaOspfIfEncryptKey |
AlaAuthenticationEncryptKey |
|
|
alaOspfIfIpMask |
IpAddress |
|
|
alaOspfIfVlanId |
Integer32 |
|
|
alaOspfIfDrRouterid |
IpAddress |
|
|
alaOspfIfBdrRouterid |
IpAddress |
|
|
alaOspfIfMTU |
Counter32 |
|
|
alaOspfIfInitNbrs |
Counter32 |
|
|
alaOspfIfExchNbrs |
Counter32 |
|
|
alaOspfIfFullNbrs |
Counter32 |
|
|
alaOspfIfLinkType |
INTEGER |
|
|
alaOspfIfOperStatus |
INTEGER |
|
|
alaOspfIfIntfName |
DisplayString |
|
|
alaOspfIf2WayNbrs |
Counter32 |
|
|
alaOspfIfBfdStatus |
INTEGER |
|
|
alaOspfIfBfdDrsOnly |
INTEGER |
|
AlaOspfVirtIfAugEntry |
|
SEQUENCE |
|
|
|
|
alaOspfVirtIfEncryptKey |
AlaAuthenticationEncryptKey |
|
|
alaOspfVirtIfOperStatus |
INTEGER |
|
AlaOspfNbrAugEntry |
|
SEQUENCE |
|
|
|
|
alaOspfNbrRestartHelperStatus |
INTEGER |
|
|
alaOspfNbrRestartHelperAge |
Unsigned32 |
|
|
alaOspfNbrRestartHelperExitReason |
INTEGER |
|
|
alaOspfNbrAreaId |
IpAddress |
|
|
alaOspfNbrDrAddress |
IpAddress |
|
|
alaOspfNbrBdrAddress |
IpAddress |
|
|
alaOspfNbrType |
INTEGER |
|
|
alaOspfNbrMode |
INTEGER |
|
|
alaOspfNbrMd5SeqNo |
Counter32 |
|
|
alaOspfNbrLastHello |
Counter32 |
|
|
alaOspfNbrPendingLSreq |
Counter32 |
|
|
alaOspfNbrPendingLSack |
Counter32 |
|
|
alaOspfNbrPendingLSupd |
Counter32 |
|
AlaOspfVirtNbrAugEntry |
|
SEQUENCE |
|
|
|
|
alaOspfVirtNbrRestartHelperStatus |
INTEGER |
|
|
alaOspfVirtNbrRestartHelperAge |
Unsigned32 |
|
|
alaOspfVirtNbrRestartHelperExitReason |
INTEGER |
|
|
alaOspfVirtNbrDrAddr |
IpAddress |
|
|
alaOspfVirtNbrBdrAddr |
IpAddress |
|
|
alaOspfVirtNbrMode |
INTEGER |
|
|
alaOspfVirtNbrMd5SeqNo |
Counter32 |
|
|
alaOspfVirtNbrLastHello |
Counter32 |
|
|
alaOspfVirtNbrPendingLSreq |
Counter32 |
|
|
alaOspfVirtNbrPendingLSack |
Counter32 |
|
|
alaOspfVirtNbrPendingLSupd |
Counter32 |
|
AlaOspfAreaAugEntry |
|
SEQUENCE |
|
|
|
|
alaOspfAreaOperStatus |
INTEGER |
|
|
alaOspfAreaLastSpfRun |
Counter32 |
|
|
alaOspfAreaActiveVlinks |
Counter32 |
|
|
alaOspfAreaIncrSpfRuns |
Counter32 |
|
|
alaOspfAreaInitNbrs |
Counter32 |
|
|
alaOspfAreaExchNbrs |
Counter32 |
|
|
alaOspfAreaFullNbrs |
Counter32 |
|
|
alaOspfAreaNumIntfs |
Counter32 |
|
|
alaOspfAreaAttachedIntfs |
OCTET STRING |
|
|
alaOspfArea2WayNbrs |
Counter32 |
|
|
alaOspfAreaNssaTranslatorRole |
INTEGER |
|
|
alaOspfAreaNssaTranslatorStabilityInterval |
INTEGER |
|
|
alaOspfAreaNssaImportSetPbit |
INTEGER |
|
|
alaOspfAreaNssaTranslatorState |
INTEGER |
|
|
alaOspfAreaNssaElectedTranslatorRouterId |
IpAddress |
|
AlaOspfExtLsdbAugEntry |
|
SEQUENCE |
|
|
|
|
alaOspfExtLsdbProto |
INTEGER |
|
|
alaOspfExtLsdbRouteTag |
Counter32 |
|
|
alaOspfExtLsdbFwdAddr |
IpAddress |
|
|
alaOspfExtLsdbMetricType |
INTEGER |
|
|
alaOspfExtLsdbMetric |
Integer32 |
|
|
alaOspfExtLsdbLength |
Integer32 |
|
|
alaOspfExtLsdbMask |
IpAddress |
|
AlaOspfAreaInterfaceEntry |
|
SEQUENCE |
|
|
|
|
alaOspfIfIpAddress |
IpAddress |
|
|
alaOspfAddressLessIf |
Integer32 |
|
AlaOspfAreaAggregateAugEntry |
|
SEQUENCE |
|
|
|
|
alaOspfAreaAggregateMetric |
INTEGER |
|
Defined Values
alcatelIND1OSPFMIB |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1 |
This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Configuration Of Global OSPF Configuration Parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE |
MODULE-IDENTITY |
|
|
|
alcatelIND1OSPFMIBObjects |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1 |
Branch For Open Shortest Path First (OSPF)
Subsystem Managed Objects. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
alcatelIND1OSPFMIBGroups |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1 |
Branch For Open Shortest Path First (OSPF)
Subsystem Units Of Conformance. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
alcatelIND1OSPFMIBCompliances |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.2 |
Branch For Open Shortest Path First (OSPF)
Subsystem Compliance Statements. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
alaOspfRedistAdminStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.1 |
Enable or disable redistribution of routes into OSPF. This object has been
deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfRedistRouteTag |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.2 |
A 32-bit value tagged to each OSPF internal route that
is redistributed in to other routing protocol domains. The
lower 16-bits typically indicate the autonomous system number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..2147483647 |
|
alaOspfTimerSpfDelay |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.3 |
Number of seconds to delay the SPF calculation after
receiving a topology change. This value should not be
greater than SPF hold time. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
alaOspfTimerSpfHold |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.4 |
Minimum time, in seconds, between two consecutive SPF
calculations. This value should not be less than SPF delay time. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
alaOspfRouteNumber |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.7 |
The number of network routes in OSPF routing table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfMTUCheck |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.8 |
Enable or disable the check for MTU size in database description
packets. Disabled by default |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfAsBdrRtr |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.9 |
Enable or disable the switch being configured as an ASBR (Autonomous
System Border Router. NOT SUPPORTED - Use IETF_OSPF.mib variable ospfASBdrRtrStatus. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfRedistProtoTable |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10 |
Protocol based configuration for route redistribution using OSPF. This table has been
deprecated. Use the alaRouteMapRedistProtoTable of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AlaOspfRedistProtoEntry |
|
alaOspfRedistProtoEntry |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10.1 |
A range of routes from a protocol to be redistributed using OSPF. This entry has been
deprecated. Use the alaRouteMapRedistProtoEntry of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlaOspfRedistProtoEntry |
|
|
alaOspfRedistProtoId |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10.1.1 |
The routing mechanism via which the routes, to be redistributed
using OSPF, are learned. This object has been deprecated. Use the
alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), local(2), static(3), directHost(4), rip(5), ospf(6), isis(7), bgp(8), ospf2(38), ospf3(70), ospf4(102), ospf5(134), ospf6(166), ospf7(198), ospf8(230) |
|
alaOspfRedistProtoSubnets |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10.1.2 |
Enable/disable the reditribution of subnet routes.
Default value is enable. This object has been deprecated. Use the
alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfRedistProtoMetricType |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10.1.3 |
Type of metric to be used for redistribution. This object has been deprecated.
Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
type1(1), type2(2) |
|
alaOspfRedistProtoMetric |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10.1.4 |
Default metric to be used for redistributing routes
using type1 metric type. This object has been deprecated. Use the
alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
alaOspfRedistProtoStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10.1.5 |
Row status of this entry. This object has been deprecated. Use the
alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
alaOspfRedistProtoRouteTag |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.10.1.6 |
Associated route tag. This object has been deprecated. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfDebugLevel |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.1 |
This Object is deprecated in favour of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
alaOspfDebugError |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.2 |
This Object is deprecated in favour of alaDrcTmOspfDebugError
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugWarning |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.3 |
This Object is deprecated in favour of alaDrcTmOspfDebugWarning
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugState |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.4 |
This Object is deprecated in favour of alaDrcTmOspfDebugState
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugRecv |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.5 |
This Object is deprecated in favour of alaDrcTmOspfDebugRecv
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugSend |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.6 |
This Object is deprecated in favour of alaDrcTmOspfDebugSend
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugFlood |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.7 |
This Object is deprecated in favour of alaDrcTmOspfDebugFlood
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugSPF |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.8 |
This Object is deprecated in favour of alaDrcTmOspfDebugSPF
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugLsdb |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.9 |
This Object is deprecated in favour of alaDrcTmOspfDebugLsdb
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugRdb |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.10 |
This Object is deprecated in favour of alaDrcTmOspfDebugRdb
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugAge |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.11 |
This Object is deprecated in favour of alaDrcTmOspfDebugAge
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugVlink |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.12 |
This Object is deprecated in favour of alaDrcTmOspfDebugVlink
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugRedist |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.13 |
This Object is deprecated in favour of alaDrcTmOspfDebugRedist
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugSummary |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.14 |
This Object is deprecated in favour of alaDrcTmOspfDebugSummary
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugDbexch |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.15 |
This Object is deprecated in favour of alaDrcTmOspfDebugDbexch
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugHello |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.16 |
This Object is deprecated in favour of alaDrcTmOspfDebugHello
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugAuth |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.17 |
This Object is deprecated in favour of alaDrcTmOspfDebugAuth
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugArea |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.18 |
This Object is deprecated in favour of alaDrcTmOspfDebugArea
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugIntf |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.19 |
This Object is deprecated in favour of alaDrcTmOspfDebugIntf
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugMip |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.20 |
This Object is deprecated in favour of alaDrcTmOspfDebugMip
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugInfo |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.21 |
This Object is deprecated in favour of alaDrcTmOspfDebugInfo
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugSetup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.22 |
This Object is deprecated in favour of alaDrcTmOspfDebugSetup
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugTime |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.23 |
This Object is deprecated in favour of alaDrcTmOspfDebugTime
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugTm |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.24 |
This Object is deprecated in favour of alaDrcTmOspfDebugTm
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugAll |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.25 |
This Object is deprecated in favour of alaDrcTmOspfDebugAll
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugRestart |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.26 |
This Object is deprecated in favour of alaDrcTmOspfDebugRestart
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfDebugHelper |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.2.27 |
This Object is deprecated in favour of alaDrcTmOspfDebugHelper
MIB Object of alaDrcTmOspfDebug Configuration |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfRouteTable |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12 |
OSPF routing table which contains the network routes. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AlaOspfRouteEntry |
|
alaOspfRouteEntry |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1 |
OSPF routing table which contains the network routes. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlaOspfRouteEntry |
|
|
alaOspfRouteDest |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.1 |
The destination IP address of this route. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfRouteMask |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.2 |
The network mask for this route. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfRouteTos |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.3 |
Type Of Service (TOS) for this route. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..2147483647 |
|
alaOspfRouteNextHop |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.4 |
The address of the next hop to reach this route. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfRouteIfIndex |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.5 |
The ifIndex value which identifies the local
interface through which the next hop of this
route should be reached. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
-1..2147483647 |
|
alaOspfRouteType |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.6 |
The type of route. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
intraArea(1), interArea(2), externalType1(3), externalType2(4), nssaExternalType1(5), nssaExternalType2(6) |
|
alaOspfRouteAge |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.7 |
The number of seconds since this route was last
updated or otherwise determined to be correct. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alaOspfRouteTag |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.8 |
The associated route tag for external roues. It's
0 for routes internal to the autonomous system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..2147483647 |
|
alaOspfRouteMetric1 |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.9 |
The primary routing metric for this route. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
alaOspfRouteMetric2 |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.10 |
An alternate routing metric for this route. It's 0
for internal routes. For an external route, it's the metric
to reach the ASBR that announced the external route. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
alaOspfRouteStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.12.1.11 |
The row status variable, used according to
row installation and removal conventions. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
alaOspfBdrRouterTable |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13 |
OSPF routing table which contains the routes to border
(ABR and ASBR) routers. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AlaOspfBdrRouterEntry |
|
alaOspfBdrRouterEntry |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1 |
OSPF routing table which contains the routes to border
(ABR and ASBR) routers. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlaOspfBdrRouterEntry |
|
|
alaOspfBdrRouterAreaId |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.1 |
The area to which the border router belongs to. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfBdrRouterId |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.2 |
The router idenitifer of this border router. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfBdrRouterTos |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.3 |
Type Of Service (TOS) for this route. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..2147483647 |
|
alaOspfBdrRouterNextHop |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.4 |
The address of the next hop to reach this border router. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfBdrRouterIfIndex |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.5 |
The ifIndex value which identifies the local
interface through which the next hop of this
route should be reached. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..2147483647 |
|
alaOspfBdrRouterType |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.6 |
The type of border router. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
abr(1), asbr(2), abrAsbr(3) |
|
alaOspfBdrRouterAge |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.7 |
The number of seconds since this route was last
updated or otherwise determined to be correct. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alaOspfBdrRouterMetric |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.8 |
The cost to reach the border router. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
alaOspfBdrRouterStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.13.1.9 |
The row status variable, used according to
row installation and removal conventions. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
alaOspfRedistRouteTable |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14 |
A configuration table which controls the routes to be
redistributed by OSPF from other routing protocols. This table has been
deprecated. Use the alaRouteMapRedistProtoTable of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AlaOspfRedistRouteEntry |
|
alaOspfRedistRouteEntry |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1 |
A configuration table which controls the routes to be
redistributed by OSPF from other routing protocols. This entry has been
deprecated. Use the alaRouteMapRedistProtoEntry of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlaOspfRedistRouteEntry |
|
|
alaOspfRedistRouteProto |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.1 |
Protocol from which this route is to be imported into OSPF. This object has been
deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), local(2), static(3), directHost(4), rip(5), isis(7), bgp(8) |
|
alaOspfRedistRouteDest |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.2 |
The destination IP address of this route. This object has been deprecated.
Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfRedistRouteMask |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.3 |
The network mask for this route. This object has been deprecated. Use the
alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfRedistRouteMetric |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.4 |
The metric to be used for the redistributed route. This object has been deprecated.
Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
alaOspfRedistRouteControl |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.5 |
Specifies how routes matching this entry are to be redistributed
into OSPF. The different mechanisms possible are to redistribute all
the subnet routes, redistribute an aggregated route if there are
one or more actual routes which match this entry or redistribute
only an exactly matching route. This object has been deprecated. Use
the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
redistributeAllSubnets(1), redistributeAsAggregate(2), redistributeExactMatch(3) |
|
alaOspfRedistRouteTagMatch |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.6 |
Redistribute the route only when the route tag matches with this
value. It defaults to 0 which matches all route tags. This object has been
deprecated. Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..2147483647 |
|
alaOspfRedistRouteEffect |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.7 |
Specifies whether the redistribution of routes in this range
is allowed or denied. This object has been deprecated. Use the
alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
redistribute(1), doNotRedistribute(2) |
|
alaOspfRedistRouteStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.14.1.8 |
The row status variable, used according to
row installation and removal conventions. This object has been deprecated.
Use the alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
Status: deprecated |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
alaOspfIfMd5Table |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16 |
The OSPF Interface MD5 Table describes the MD5 key
management for OSPF interfaces. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AlaOspfIfMd5Entry |
|
alaOspfIfMd5Entry |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1 |
The OSPF Interface MD5 Entry describes the MD5 key
management for OSPF interfaces. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlaOspfIfMd5Entry |
|
|
alaOspfIfMd5IpAddress |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.1 |
The IP address of this OSPF MD5 key interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfIfMd5KeyId |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.2 |
A key identifier which identifies the algorithm and
MD5 secret key associated with this interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..255 |
|
alaOspfIfMd5Key |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.3 |
The MD5 message digest key. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..16) |
|
alaOspfIfMd5KeyStartAccept |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.4 |
The time that OSPF router will start accepting packets
that have been created with this key. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alaOspfIfMd5KeyStopAccept |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.5 |
The time that OSPF router will stop accepting packets
that have been created with this key. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alaOspfIfMd5KeyStartGenerate |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.6 |
The time that OSPF router will start using this key for
packet generation. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alaOspfIfMd5KeyStopGenerate |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.16.1.7 |
The time that OSPF router will stop using this key for
packet generation. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
alaOspfIfAugEntry |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1 |
An entry of alaOspfIfAugTable |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlaOspfIfAugEntry |
|
|
alaOspfIfIpMask |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.2 |
The IP mask of this OSPF interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfIfVlanId |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.3 |
Vlan Identifier associated with this interface |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..4097 |
|
alaOspfIfDrRouterid |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.4 |
Router Id of Designated router for this interface |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfIfBdrRouterid |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.5 |
Router Id of Backup Designated router for this interface |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfIfMTU |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.6 |
Max Transfer size of OSPF packets on this interface |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfIfInitNbrs |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.7 |
Number of ospf INIT state neighbors on this interface |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfIfExchNbrs |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.8 |
Number of ospf EXCHANGE state neighbors on this interface |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfIfFullNbrs |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.9 |
Number of ospf FULL state neighbors on this interface |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfIfLinkType |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.10 |
Type of physical medium used for transmission of OSPF packets |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
broadcast(1) |
|
alaOspfIfOperStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.11 |
Operational status of this interface |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
down(0), up(1) |
|
alaOspfIfIntfName |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.12 |
The user defined name used to identify the IP interface |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
alaOspfIf2WayNbrs |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.13 |
Number of ospf 2-WAY state neighbors on this interface |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfIfBfdStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.14 |
Enables/Disables OSPF for a BFD interface |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfIfBfdDrsOnly |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.17.1.15 |
Enables/Disables Drs Only option for a BFD interface |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfVirtIfAugEntry |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.18.1 |
An entry of alaOspfVirtIfAugTable |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlaOspfVirtIfAugEntry |
|
|
alaOspfVirtIfOperStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.18.1.2 |
Operational status of the virtual link |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
down(0), up(1) |
|
alaOspfRestartHelperSupport |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.19 |
The router's support for acting as an OSPF hitless restart helper. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfRestartHelperStrictLSAChecking |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.20 |
Indicates whether or not a changed LSA will result in termination
of graceful restart by a helping router. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfRestartHelperStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.21 |
Indicates whether this OSPF router is operating as a Helper to a
restarting router. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
helping(1), notHelping(2) |
|
alaOspfRFC1583Compatibility |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.22 |
Indicates metrics used to choose among multiple AS-
external-LSAs. When RFC1583Compatibility is set to
enabled, only cost will be used when choosing among
multiple AS-external-LSAs advertising the same
destination. When RFC1583Compatibility is set to
disabled, preference will be driven first by type of
path using cost only to break ties. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
alaOspfReferenceBandwidth |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.25 |
Reference bandwidth in kilobits/second for
calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
alaOspfRestartSupport |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.26 |
The router's support for OSPF hitless restart.
Options include: no restart support, only planned
restarts or both planned and unplanned restarts. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), plannedOnly(2), plannedAndUnplanned(3) |
|
alaOspfRestartInterval |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.27 |
Configured OSPF hitless restart timeout interval. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..1800 |
|
alaOspfRestartStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.28 |
Current status of OSPF hitless restart. The status of hitless restart is
unplannedRestart after a CMM takeover. Before CMM takeover, the status is
plannedRestart. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notRestarting(1), plannedRestart(2), unplannedRestart(3) |
|
alaOspfRestartAge |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.29 |
Remaining time in current OSPF hitless restart
interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
alaOspfRestartExitReason |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.30 |
Describes the outcome of the last attempt at a
hitless restart. If the value is 'none', no restart
has yet been attempted. If the value is 'inProgress',
a restart attempt is currently underway. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), inProgress(2), completed(3), timedOut(4), topologyChanged(5) |
|
alaOspfNbrAugEntry |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1 |
Additions to neighbor table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlaOspfNbrAugEntry |
|
|
alaOspfNbrRestartHelperStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.1 |
Indicates whether the router is acting
as a hitless restart helper for the neighbor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notHelping(1), helping(2) |
|
alaOspfNbrRestartHelperAge |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.2 |
Remaining time in current OSPF hitless restart
interval, if the router is acting as a restart
helper for the neighbor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
alaOspfNbrRestartHelperExitReason |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.3 |
Describes the outcome of the last attempt at acting
as a hitless restart helper for the neighbor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), inProgress(2), completed(3), timedOut(4), topologyChanged(5) |
|
alaOspfNbrAreaId |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.4 |
The area to which this neighbor belongs |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfNbrDrAddress |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.5 |
Designated router of this neighbor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfNbrBdrAddress |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.6 |
Backup Designated router of this neighbor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfNbrType |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.7 |
Neighbors learned via the OSPF Hello protocol are dynamic.
Configured neighbors are static |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dynamic(1), static(2) |
|
alaOspfNbrMode |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.8 |
Current neighbor mode. This is applicable only during adjacency formation |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
slave(1), master(2), slaveHold(3) |
|
alaOspfNbrMd5SeqNo |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.9 |
Sequence number used in Md5 authentication |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfNbrLastHello |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.10 |
No of seconds elapsed since the last hello was received from this neighbor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfNbrPendingLSreq |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.11 |
Number of outstanding link state requests to be sent to this neighbor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfNbrPendingLSack |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.12 |
Number of outstanding link state acknowledgements to be sent to this neighbor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfNbrPendingLSupd |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.31.1.13 |
Number of outstanding link state update packets to be sent to this neighbor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfVirtNbrAugEntry |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1 |
Information regarding a single virtual neighbor. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlaOspfVirtNbrAugEntry |
|
|
alaOspfVirtNbrRestartHelperStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.1 |
Indicates whether the router is acting
as a hitless restart helper for the neighbor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notHelping(1), helping(2) |
|
alaOspfVirtNbrRestartHelperAge |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.2 |
Remaining time in current OSPF hitless restart
interval, if the router is acting as a restart
helper for the neighbor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
alaOspfVirtNbrRestartHelperExitReason |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.3 |
Describes the outcome of the last attempt at acting
as a hitless restart helper for the neighbor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), inProgress(2), completed(3), timedOut(4), topologyChanged(5) |
|
alaOspfVirtNbrDrAddr |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.4 |
Designated router of this virtual neighbor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfVirtNbrBdrAddr |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.5 |
Backup Designated router of this virtual neighbor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfVirtNbrMode |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.6 |
Current neighbor mode. This is applicable only during adjacency formation |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
slave(1), master(2), slaveHold(3) |
|
alaOspfVirtNbrMd5SeqNo |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.7 |
Sequence number used in Md5 authentication |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfVirtNbrLastHello |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.8 |
No of seconds elapsed since the last hello was received from this neighbor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfVirtNbrPendingLSreq |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.9 |
Number of outstanding link state requests to be sent to this neighbor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfVirtNbrPendingLSack |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.10 |
Number of outstanding link state acknowledgements to be sent to this neighbor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfVirtNbrPendingLSupd |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.32.1.11 |
Number of outstanding link state update packets to be sent to this neighbor |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfRestartInitiate |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.33 |
Initiates a planned graceful restart, if set to plannedRestart. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notRestarting(1), plannedRestart(2) |
|
alaOspfTotalSpfRuns |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.1 |
Total number of SPF runs performed on this router |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfTotalIncrSpfRuns |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.2 |
Total number of Incremental SPF runs performed on this router |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfTotalInitNbrs |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.3 |
Number of INIT state neighbors on this router |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfTotalExchNbrs |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.4 |
Number of EXCHANGE state neighbors on this router |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfTotalFullNbrs |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.5 |
Number of FULL state neighbors on this router |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfTotalAreas |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.6 |
Total Number of areas configured on this router |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfTotalActiveAreas |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.7 |
Total Number of active areas configured on this router |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfTotalNSSA |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.9 |
Total Number of NSSA areas on this router |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfTotal2wayNbrs |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.3.10 |
Number of 2-way state neighbors on this router |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfAreaAugEntry |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1 |
Area table additions |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlaOspfAreaAugEntry |
|
|
alaOspfAreaOperStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.1 |
Operational status of the area |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inactive(1), up(2), down(3) |
|
alaOspfAreaLastSpfRun |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.2 |
Time in secs since last SPF ran for this area |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfAreaActiveVlinks |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.3 |
Number of active virtual links in this area |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfAreaIncrSpfRuns |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.4 |
The number of times that incremental SPF has been run for this area to
calculate inter-area routes |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfAreaInitNbrs |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.5 |
Number of ospf INIT state neighbors in this area |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfAreaExchNbrs |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.6 |
Number of ospf EXCHANGE state neighbors in this area |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfAreaFullNbrs |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.7 |
Number of ospf FULL state neighbors in this area |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfAreaNumIntfs |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.8 |
Number of interfaces in this area |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfAreaAttachedIntfs |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.9 |
List of interfaces attached to this area |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..2200) |
|
alaOspfArea2WayNbrs |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.10 |
Number of ospf 2-WAY state neighbors in this area |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfAreaNssaTranslatorRole |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.11 |
Specifies whether or not an NSSA border router will unconditionally translate
Type-7 LSAs into Type-5 LSAs. When set to always, an NSSA border router always
translates Type-7 LSAs into Type-5 LSAs regardless of the translator state of
other NSSA border routers. When set to candidate, an NSSA border router participates
in the translator election process. For non-NSSA border routers, this value is none. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
candidate(1), always(2), none(3) |
|
alaOspfAreaNssaTranslatorStabilityInterval |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.12 |
Defines the length of time (in seconds) an elected Type-7 translator will continue
to perform its translator duties once it has determined that its translator status
has been deposed by another NSSA border router translator. For non-NSSA border routers,
this value is not defined and will be 0. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..120 |
|
alaOspfAreaNssaImportSetPbit |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.13 |
Specifies whether or not an NSSA AS boundary router sets the P-bit when external
routes are imported into the NSSA as Type-7 LSAs. For non-NSSA boundary routers,
this value is not defined and will be none. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
propagate(1), doNotPropagate(2), none(3) |
|
alaOspfAreaNssaTranslatorState |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.14 |
The state of the NSSA Translator, for NSSA border routers. For non-NSSA border
routers, the state is none. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2), elected(3), none(4) |
|
alaOspfAreaNssaElectedTranslatorRouterId |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.35.1.15 |
The elected/current NSSA translator router id elected by this NSSA border router.
For non-NSSA border router, this object is not defined. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfExtLsdbAugEntry |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1 |
External Link state database additions |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlaOspfExtLsdbAugEntry |
|
|
alaOspfExtLsdbProto |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.1 |
Protocol through which this external LSA was learnt |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
local(1), static(2), direct(3), rip(4), ospf(5), isis(6), bgp(7) |
|
alaOspfExtLsdbRouteTag |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.2 |
A 32-bit value attached to each external route. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
alaOspfExtLsdbFwdAddr |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.3 |
The address to which data traffic for the advertised destination is to be forwarded.
If the Forwarding address is set to 0.0.0.0, data traffic is to be forwarded to the
LSA's originator. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfExtLsdbMetricType |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.4 |
The type of external metric. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
type1(1), type2(2) |
|
alaOspfExtLsdbMetric |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.5 |
The OSPF External TOS 0 Metric. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
alaOspfExtLsdbLength |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.6 |
The length of the AS External Link-State Advertisement. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
alaOspfExtLsdbMask |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.36.1.7 |
The IP address mask for the advertised destination. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfAreaInterfaceEntry |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.37.1 |
Lests all interfaces attached to a specific area |
Status: obsolete |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlaOspfAreaInterfaceEntry |
|
|
alaOspfIfIpAddress |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.37.1.1 |
The IP address of this OSPF interface. |
Status: obsolete |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
alaOspfAddressLessIf |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.37.1.2 |
For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces having no IP Address. |
Status: obsolete |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2147483647 |
|
alaOspfAreaAggregateAugEntry |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.38.1 |
Additions to the area aggregate table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlaOspfAreaAggregateAugEntry |
|
|
alaOspfAreaAggregateMetric |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.38.1.1 |
If set, this value is used as the metric for the area aggregate route,
overriding the calculated metric |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
alaOspfDefaultOriginate |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.39 |
Indicates whether this ASBR router originates the default route
into the OSPF normal area(s). If set to 'only', the default route
is advertised into the OSPF normal area, provided the ASBR has
a route to 0.0.0.0/0 in its routing table. Alternatively, if set
to 'always', a default route is advertised into the OSPF domain
regardless of whether the ASBR has a route to 0.0.0.0/0. A value of
'none' has the effect of not originating the default route. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), only(2), always(3) |
|
alaOspfDefaultOriginateMetricType |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.40 |
Type of metric to be used with the default route. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
type1(1), type2(2) |
|
alaOspfDefaultOriginateMetric |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.41 |
Default metric to be used for the default route. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
alaOspfBfdStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.42 |
Enables or disables bfd for OSPF protocol |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alaOspfBfdAllInterfaceStatus |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.1.1.43 |
Enables or disables bfd for all OSPF interfaces |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
alcatelIND1OSPFMIBCompliance |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.2.1 |
Compliance statement for
Open Shortest Path First (OSPF) Subsystem. |
Status: current |
Access: read-write |
MODULE-COMPLIANCE |
|
|
|
alaOspfMiscellaneousGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.1 |
Collection of Miscellaneous objects for management of OSPF. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaOspfRedistProtoGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.2 |
Collection of objects for management of Route Redistribution Protocol.
These objects have been deprecated, and the group is no longer mandatory. |
Status: deprecated |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaOspfDebugGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.3 |
Collection of objects for management of Debugging configuration. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaOspfRouteGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.4 |
Collection of objects for management of Network Route configuration. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaOspfBdrRouterGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.5 |
Collection of objects for management of routes to Border Routers. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaOspfRedistRouteGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.6 |
Collection of objects for management of
Route Redistribution configuration. These objects have been deprecated,
and the group is no longer mandatory. |
Status: deprecated |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaOspfIfMd5Group |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.8 |
Collection of objects for management of Interface MD5 configuration. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaOspfGeneralGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.9 |
Collection of objects for management of Interface MD5 configuration. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaOspfAreaInterfaceGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.7 |
all interfaces attached to a specific area. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaOspfAreaAggregateAugGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.10 |
Additions to the area aggregate table. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaOspfAreaAugGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.11 |
Area table additions. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaOspfExtLsdbAugGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.12 |
External Link state database additions. |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaOspfIfAugGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.13 |
Tok_String |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaOspfNbrAugEntryGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.14 |
Tok_String |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaProtocolOspfGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.15 |
Tok_String |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
alaOspfVirtNbrAugGroup |
1.3.6.1.4.1.6486.801.1.2.1.10.4.1.2.1.16 |
Tok_String |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|