ALCATEL-IND1-TIMETRA-QOS-MIB

File: ALCATEL-IND1-TIMETRA-QOS-MIB.mib (243886 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
ATM-TC-MIB INET-ADDRESS-MIB ALCATEL-IND1-TIMETRA-GLOBAL-MIB
ALCATEL-IND1-TIMETRA-TC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
IpAddress Integer32 MODULE-COMPLIANCE
OBJECT-GROUP TEXTUAL-CONVENTION RowStatus
MacAddress TruthValue StorageType
TimeStamp AtmServiceCategory AtmTrafficDescrParamIndex
InetAddress InetAddressType InetAddressIPv6
InetAddressPrefixLength timetraSRMIBModules tmnxSRObjs
tmnxSRNotifyPrefix tmnxSRConfs Dot1PPriority
IpAddressPrefixLength ServiceAccessPoint TItemDescription
TNamedItem TNamedItemOrEmpty TDSCPValue
TDSCPName TDSCPNameOrEmpty TIpProtocol
TTcpUdpPort TTcpUdpPortOperator TFrameType
TFCName TFCNameOrEmpty TLspExpValue
TQueueId TIngressQueueId TEgressQueueId
TPortSchedulerPIR TPortSchedulerCIR TWeight
TCIRRate TPIRRate TPIRRateOrZero
TmnxEnabledDisabled TPolicyID TSapIngressPolicyID
TSapEgressPolicyID

Defined Types

TNetworkPolicyID  
the identification number of a network policy.
TEXTUAL-CONVENTION    
  Unsigned32 1..65535  

TItemScope  
This textual-convention determines some aspects of an item's behavior regarding creation and use, unused entry garbage collection, and automated promulgation by Element Management System to other systems in the service domain. TItemScope applies to SAP-ingress, SAP-egress, and Network policies, and to IP filters and MAC filters. exclusive: When the scope of an item is defined as exclusive, the item can only be applied once, for example to a single SAP. Attempting to assign the policy to a second SAP is not allowed and will result in an error. If the item is removed from the exclusive SAP, it will become available for assignment to another exclusive SAP. A non-applied exclusive scope policy is a candidate to be removed from the system by a TBD garbage collection command. The system default policies cannot be put into the exclusive scope. An error will be generated if scope exclusive is executed in any policies with a policy-id equal to 1. template: When the scope of an item is defined as template, the item can be applied any number of times. Policies with template scope will not be considered for deletion by a TBD garbage collection command; all items of scope 'template' must be deleted explicitly. The system default policies will always be scope template. An error will occur if a policy-id 1 is attempted to be set to scope exclusive.
TEXTUAL-CONVENTION    
  INTEGER exclusive(1), template(2)  

TItemMatch  
when set to off, the item is not matched. when set to false, packets without the item match the filter. when set to true, packets with the item match the filter.
TEXTUAL-CONVENTION    
  INTEGER off(1), false(2), true(3)  

TPriority  
the priority to apply to a packet
TEXTUAL-CONVENTION    
  INTEGER low(1), high(2)  

TPriorityOrDefault  
the priority to apply to a packet. when set to default(3), the priority from the default-action is used.
TEXTUAL-CONVENTION    
  INTEGER low(1), high(2), default(3)  

TProfile  
the profile marking of a packet at the ingress.
TEXTUAL-CONVENTION    
  INTEGER in(1), out(2)  

TDEProfile  
This textual-convention specifies the profile marking of a packet. Value of 'in' specifies the in-profile marking. Value of 'out' specifies the out-profile marking. Value of 'de' specifies that the profile marking will be based on the DE (Drop-Eligible) bit. DE bit-value of '0' specifies in-profile and DE bit value of '1' specifies out-profile marking.
TEXTUAL-CONVENTION    
  INTEGER in(1), out(2), de(3)  

TProfileOrNone  
Profile marking of a packet.
TEXTUAL-CONVENTION    
  INTEGER none(0), in(1), out(2)  

TAdaptationRule  
The adaptation rule to be applied to calcluate the operational values for the specified entity.
TEXTUAL-CONVENTION    
  INTEGER max(1), min(2), closest(3)  

TRemarkType  
The remarking to be used.
TEXTUAL-CONVENTION    
  INTEGER none(1), dscp(2), precedence(3)  

TPrecValue  
The precedence bits as used in the IPv4 header. This constitutes of 3 bits and hence can hold the values from 0 to 7.
TEXTUAL-CONVENTION    
  Integer32 0..7  

TPrecValueOrNone  
The precedence bits as used in the IPv4 header. This constitutes of 3 bits and hence can hold the values from 0 to 7. The value '-1' specifies that the precedence value is undefined/unused.
TEXTUAL-CONVENTION    
  Integer32 -1 | 0..7  

TBurstSize  
The amount of buffer space (in kbytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value.
TEXTUAL-CONVENTION    
  Integer32 -1 | 0..131072  

TBurstPercent  
The percentage of buffer space assigned to a queue that is reserved for some purpose.
TEXTUAL-CONVENTION    
  Integer32 0..100  

TBurstHundredthsOfPercent  
The percentage of buffer space assigned to a queue that is reserved for some purpose, defined to two decimal places.
TEXTUAL-CONVENTION    
  Integer32 0..10000  

TBurstPercentOrDefault  
The percentage of buffer space assigned to a queue that is reserved for some purpose. The value -1 means that the actual value is derived from the corresponding buffer policy's default value.
TEXTUAL-CONVENTION    
  Integer32 -1 | 0..100  

TRatePercent  
The percentage of maximum rate allowed.
TEXTUAL-CONVENTION    
  Integer32 0..100  

TPIRRatePercent  
The percentage of maximum PIR rate allowed. A value of 0 is no acceptable, so the range begins at 1.
TEXTUAL-CONVENTION    
  Integer32 1..100  

TLevel  
The level of the specified entity while feeding into the parent.
TEXTUAL-CONVENTION    
  Integer32 1..8  

TLevelOrDefault  
The level of the specified entity while feeding into the parent. The value 0 is used to denote a default value.
TEXTUAL-CONVENTION    
  Integer32 0 | 1..8  

TQueueMode  
The mode in which the queue is operating. If the queue is operating in the 'priority' mode, it is capable of handling traffic differently with two distinct priorities. These priorities are assigned by the stages preceding the queueing framework in the system. When the queue is operating in the 'profile' mode, in other words the color aware mode, the queue tries to provide the appropriate bandwidth to the packets with different profiles. The profiles are assigned according to the configuration of the forwarding class or the sub-forwarding class. In 'priority' mode, the queue does not have the functionality to support the profiled traffic and in such cases the queue will have a degraded performance. However, the converse is not valid and a queue in 'profile' mode should be capable of supporting the different priorities of traffic.
TEXTUAL-CONVENTION    
  INTEGER priority(1), profile(2)  

TEntryIndicator  
Uniquely identifies an entry in a policy or filter table. The value 0 is not a valid entry-id. When used as insertion point the value 0 indicates that entries must be inserted at the very beginning, i.e.before the first entry defined.
TEXTUAL-CONVENTION    
  Unsigned32 0..65535  

TEntryId  
uniquely identifies an entry in a policy or filter table. to facilitate insertion of entries in the tables, we recommend assigning entry IDs by 10s: 10, 20, 30, etc.
TEXTUAL-CONVENTION    
  Unsigned32 1..65535  

TMatchCriteria  
determines whether the entry matches traffic using IP match entries or MAC match entries.
TEXTUAL-CONVENTION    
  INTEGER ip(1), mac(2), none(3)  

TAtmTdpDescrType  
The TAtmTdpDescrType is an enumerated integer whose value indicates the types of cell loss priority to be used in conjunction with traffic parameters. The following values are outlined: Integer Value Interpretation ------------- ------------------------ clp0And1pcr PCR applies to CLP 0 and CLP 1 cell flows clp0And1pcrPlusClp0And1scr PCR applies to CLP 0 and CLP 1 cell flows. SCR applies to CLP 0 and CLP 1 cell flows. clp0And1pcrPlusClp0scr PCR applies to CLP 0 and CLP 1 cell flows. SCR applies to CLP 0 cell flows. clp0And1pcrPlusClp0scrTag PCR applies to CLP 0 and CLP 1 cell flows. SCR applies to CLP 0 cell flows.
TEXTUAL-CONVENTION    
  INTEGER clp0And1pcr(0), clp0And1pcrPlusClp0And1scr(1), clp0And1pcrPlusClp0scr(2), clp0And1pcrPlusClp0scrTag(3)  

TDEValue  
This textual-convention specifies the DE (Drop Eligible) bit value. The value of '-1' means DE value is not specified.
TEXTUAL-CONVENTION    
  Integer32 -1 | 0..1  

TDSCPNameEntry  
SEQUENCE    
  tDSCPName TDSCPName
  tDSCPNameRowStatus RowStatus
  tDSCPNameStorageType StorageType
  tDSCPNameDscpValue TDSCPValue
  tDSCPNameLastChanged TimeStamp

TFCNameEntry  
SEQUENCE    
  tFCName TFCName
  tFCRowStatus RowStatus
  tFCStorageType StorageType
  tFCValue Integer32
  tFCNameLastChanged TimeStamp

TSapIngressEntry  
SEQUENCE    
  tSapIngressIndex TSapIngressPolicyID
  tSapIngressRowStatus RowStatus
  tSapIngressScope TItemScope
  tSapIngressDescription TItemDescription
  tSapIngressDefaultFC TNamedItem
  tSapIngressDefaultFCPriority TPriority
  tSapIngressMatchCriteria TMatchCriteria
  tSapIngressLastChanged TimeStamp

TSapIngressQueueEntry  
SEQUENCE    
  tSapIngressQueue TIngressQueueId
  tSapIngressQueueRowStatus RowStatus
  tSapIngressQueueParent TNamedItemOrEmpty
  tSapIngressQueueLevel TLevel
  tSapIngressQueueWeight TWeight
  tSapIngressQueueCIRLevel TLevelOrDefault
  tSapIngressQueueCIRWeight TWeight
  tSapIngressQueueMCast TruthValue
  tSapIngressQueueExpedite INTEGER
  tSapIngressQueueCBS TBurstSize
  tSapIngressQueueMBS TBurstSize
  tSapIngressQueueHiPrioOnly TBurstPercentOrDefault
  tSapIngressQueuePIRAdaptation TAdaptationRule
  tSapIngressQueueCIRAdaptation TAdaptationRule
  tSapIngressQueueAdminPIR TPIRRate
  tSapIngressQueueAdminCIR TCIRRate
  tSapIngressQueueOperPIR TPIRRate
  tSapIngressQueueOperCIR TCIRRate
  tSapIngressQueueLastChanged TimeStamp
  tSapIngressQueuePoliced TruthValue
  tSapIngressQueueMode TQueueMode
  tSapIngressQueuePoolName TNamedItemOrEmpty

TSapIngressDSCPEntry  
SEQUENCE    
  tSapIngressDSCP TDSCPName
  tSapIngressDSCPRowStatus RowStatus
  tSapIngressDSCPFC TNamedItemOrEmpty
  tSapIngressDSCPPriority TPriorityOrDefault
  tSapIngressDSCPLastChanged TimeStamp

TSapIngressDot1pEntry  
SEQUENCE    
  tSapIngressDot1pValue Dot1PPriority
  tSapIngressDot1pRowStatus RowStatus
  tSapIngressDot1pFC TNamedItemOrEmpty
  tSapIngressDot1pPriority TPriorityOrDefault
  tSapIngressDot1pLastChanged TimeStamp

TSapIngressIPCriteriaEntry  
SEQUENCE    
  tSapIngressIPCriteriaIndex TEntryId
  tSapIngressIPCriteriaRowStatus RowStatus
  tSapIngressIPCriteriaDescription TItemDescription
  tSapIngressIPCriteriaActionFC TNamedItemOrEmpty
  tSapIngressIPCriteriaActionPriority TPriorityOrDefault
  tSapIngressIPCriteriaSourceIpAddr IpAddress
  tSapIngressIPCriteriaSourceIpMask IpAddressPrefixLength
  tSapIngressIPCriteriaDestIpAddr IpAddress
  tSapIngressIPCriteriaDestIpMask IpAddressPrefixLength
  tSapIngressIPCriteriaProtocol TIpProtocol
  tSapIngressIPCriteriaSourcePortValue1 TTcpUdpPort
  tSapIngressIPCriteriaSourcePortValue2 TTcpUdpPort
  tSapIngressIPCriteriaSourcePortOperator TTcpUdpPortOperator
  tSapIngressIPCriteriaDestPortValue1 TTcpUdpPort
  tSapIngressIPCriteriaDestPortValue2 TTcpUdpPort
  tSapIngressIPCriteriaDestPortOperator TTcpUdpPortOperator
  tSapIngressIPCriteriaDSCP TDSCPNameOrEmpty
  tSapIngressIPCriteriaFragment TItemMatch
  tSapIngressIPCriteriaLastChanged TimeStamp

TSapIngressMacCriteriaEntry  
SEQUENCE    
  tSapIngressMacCriteriaIndex TEntryId
  tSapIngressMacCriteriaRowStatus RowStatus
  tSapIngressMacCriteriaDescription TItemDescription
  tSapIngressMacCriteriaActionFC TNamedItemOrEmpty
  tSapIngressMacCriteriaActionPriority TPriorityOrDefault
  tSapIngressMacCriteriaFrameType TFrameType
  tSapIngressMacCriteriaSrcMacAddr MacAddress
  tSapIngressMacCriteriaSrcMacMask MacAddress
  tSapIngressMacCriteriaDstMacAddr MacAddress
  tSapIngressMacCriteriaDstMacMask MacAddress
  tSapIngressMacCriteriaDot1PValue Dot1PPriority
  tSapIngressMacCriteriaDot1PMask Dot1PPriority
  tSapIngressMacCriteriaEthernetType Integer32
  tSapIngressMacCriteriaDSAP ServiceAccessPoint
  tSapIngressMacCriteriaDSAPMask ServiceAccessPoint
  tSapIngressMacCriteriaSSAP ServiceAccessPoint
  tSapIngressMacCriteriaSSAPMask ServiceAccessPoint
  tSapIngressMacCriteriaSnapPid Integer32
  tSapIngressMacCriteriaSnapOui INTEGER
  tSapIngressMacCriteriaLastChanged TimeStamp

TSapIngressFCEntry  
SEQUENCE    
  tSapIngressFCName TNamedItem
  tSapIngressFCRowStatus RowStatus
  tSapIngressFCQueue TIngressQueueId
  tSapIngressFCMCastQueue TIngressQueueId
  tSapIngressFCBCastQueue TIngressQueueId
  tSapIngressFCUnknownQueue TIngressQueueId
  tSapIngressFCLastChanged TimeStamp
  tSapIngressFCInProfRemark TRemarkType
  tSapIngressFCInProfDscp TNamedItemOrEmpty
  tSapIngressFCInProfPrec TPrecValueOrNone
  tSapIngressFCOutProfRemark TRemarkType
  tSapIngressFCOutProfDscp TNamedItemOrEmpty
  tSapIngressFCOutProfPrec TPrecValueOrNone
  tSapIngressFCProfile TProfileOrNone
  tSapIngressFCDE1OutOfProfile TruthValue

TSapIngressPrecEntry  
SEQUENCE    
  tSapIngressPrecValue TPrecValue
  tSapIngressPrecRowStatus RowStatus
  tSapIngressPrecFC TNamedItemOrEmpty
  tSapIngressPrecFCPriority TPriorityOrDefault
  tSapIngressPrecLastChanged TimeStamp

TSapIngressIPv6CriteriaEntry  
SEQUENCE    
  tSapIngressIPv6CriteriaIndex TEntryId
  tSapIngressIPv6CriteriaRowStatus RowStatus
  tSapIngressIPv6CriteriaDescription TItemDescription
  tSapIngressIPv6CriteriaActionFC TNamedItemOrEmpty
  tSapIngressIPv6CriteriaActionPriority TPriorityOrDefault
  tSapIngressIPv6CriteriaSourceIpAddr InetAddressIPv6
  tSapIngressIPv6CriteriaSourceIpMask InetAddressPrefixLength
  tSapIngressIPv6CriteriaDestIpAddr InetAddressIPv6
  tSapIngressIPv6CriteriaDestIpMask InetAddressPrefixLength
  tSapIngressIPv6CriteriaNextHeader TIpProtocol
  tSapIngressIPv6CriteriaSourcePortValue1 TTcpUdpPort
  tSapIngressIPv6CriteriaSourcePortValue2 TTcpUdpPort
  tSapIngressIPv6CriteriaSourcePortOperator TTcpUdpPortOperator
  tSapIngressIPv6CriteriaDestPortValue1 TTcpUdpPort
  tSapIngressIPv6CriteriaDestPortValue2 TTcpUdpPort
  tSapIngressIPv6CriteriaDestPortOperator TTcpUdpPortOperator
  tSapIngressIPv6CriteriaDSCP TDSCPNameOrEmpty
  tSapIngressIPv6CriteriaLastChanged TimeStamp

TSapEgressEntry  
SEQUENCE    
  tSapEgressIndex TSapEgressPolicyID
  tSapEgressRowStatus RowStatus
  tSapEgressScope TItemScope
  tSapEgressDescription TItemDescription
  tSapEgressLastChanged TimeStamp

TSapEgressQueueEntry  
SEQUENCE    
  tSapEgressQueueIndex TEgressQueueId
  tSapEgressQueueRowStatus RowStatus
  tSapEgressQueueParent TNamedItemOrEmpty
  tSapEgressQueueLevel TLevel
  tSapEgressQueueWeight TWeight
  tSapEgressQueueCIRLevel TLevelOrDefault
  tSapEgressQueueCIRWeight TWeight
  tSapEgressQueueExpedite INTEGER
  tSapEgressQueueCBS TBurstSize
  tSapEgressQueueMBS TBurstSize
  tSapEgressQueueHiPrioOnly TBurstPercentOrDefault
  tSapEgressQueuePIRAdaptation TAdaptationRule
  tSapEgressQueueCIRAdaptation TAdaptationRule
  tSapEgressQueueAdminPIR TPIRRate
  tSapEgressQueueAdminCIR TCIRRate
  tSapEgressQueueOperPIR TPIRRate
  tSapEgressQueueOperCIR TCIRRate
  tSapEgressQueueLastChanged TimeStamp
  tSapEgressQueueUsePortParent TruthValue
  tSapEgressQueuePortLvl TLevel
  tSapEgressQueuePortWght TWeight
  tSapEgressQueuePortCIRLvl TLevelOrDefault
  tSapEgressQueuePortCIRWght TWeight
  tSapEgressQueuePortAvgOverhead Unsigned32
  tSapEgressQueuePoolName TNamedItemOrEmpty

TSapEgressFCEntry  
SEQUENCE    
  tSapEgressFCName TFCName
  tSapEgressFCRowStatus RowStatus
  tSapEgressFCQueue TEgressQueueId
  tSapEgressFCDot1PValue Dot1PPriority
  tSapEgressFCLastChanged TimeStamp
  tSapEgressFCDot1PInProfile Dot1PPriority
  tSapEgressFCDot1POutProfile Dot1PPriority
  tSapEgressFCForceDEValue TDEValue
  tSapEgressFCDEMark TruthValue
  tSapEgressFCInProfDscp TNamedItemOrEmpty
  tSapEgressFCOutProfDscp TNamedItemOrEmpty
  tSapEgressFCInProfPrec TPrecValueOrNone
  tSapEgressFCOutProfPrec TPrecValueOrNone

TNetworkPolicyEntry  
SEQUENCE    
  tNetworkPolicyIndex TNetworkPolicyID
  tNetworkPolicyRowStatus RowStatus
  tNetworkPolicyScope TItemScope
  tNetworkPolicyDescription TItemDescription
  tNetworkPolicyIngressDefaultActionFC TFCName
  tNetworkPolicyIngressDefaultActionProfile TProfile
  tNetworkPolicyEgressRemark TruthValue
  tNetworkPolicyLastChanged TimeStamp
  tNetworkPolicyIngressLerUseDscp TruthValue

TNetworkIngressDSCPEntry  
SEQUENCE    
  tNetworkIngressDSCP TDSCPName
  tNetworkIngressDSCPRowStatus RowStatus
  tNetworkIngressDSCPFC TFCNameOrEmpty
  tNetworkIngressDSCPProfile TProfile
  tNetworkIngressDSCPLastChanged TimeStamp

TNetworkIngressDot1pEntry  
SEQUENCE    
  tNetworkIngressDot1pValue Dot1PPriority
  tNetworkIngressDot1pRowStatus RowStatus
  tNetworkIngressDot1pFC TFCNameOrEmpty
  tNetworkIngressDot1pProfile TDEProfile
  tNetworkIngressDot1pLastChanged TimeStamp

TNetworkIngressLSPEXPEntry  
SEQUENCE    
  tNetworkIngressLSPEXP TLspExpValue
  tNetworkIngressLSPEXPRowStatus RowStatus
  tNetworkIngressLSPEXPFC TFCNameOrEmpty
  tNetworkIngressLSPEXPProfile TProfile
  tNetworkIngressLSPEXPLastChanged TimeStamp

TNetworkEgressFCEntry  
SEQUENCE    
  tNetworkEgressFCName TFCName
  tNetworkEgressFCDSCPInProfile TDSCPNameOrEmpty
  tNetworkEgressFCDSCPOutProfile TDSCPNameOrEmpty
  tNetworkEgressFCLspExpInProfile TLspExpValue
  tNetworkEgressFCLspExpOutProfile TLspExpValue
  tNetworkEgressFCDot1pInProfile Dot1PPriority
  tNetworkEgressFCDot1pOutProfile Dot1PPriority
  tNetworkEgressFCLastChanged TimeStamp
  tNetworkEgressFCForceDEValue TDEValue
  tNetworkEgressFCDEMark TruthValue

TNetworkQueuePolicyEntry  
SEQUENCE    
  tNetworkQueuePolicy TNamedItem
  tNetworkQueuePolicyRowStatus RowStatus
  tNetworkQueuePolicyDescription TItemDescription
  tNetworkQueuePolicyLastChanged TimeStamp

TNetworkQueueEntry  
SEQUENCE    
  tNetworkQueue TQueueId
  tNetworkQueueRowStatus RowStatus
  tNetworkQueuePoolName TNamedItemOrEmpty
  tNetworkQueueParent TNamedItemOrEmpty
  tNetworkQueueLevel TLevel
  tNetworkQueueWeight TWeight
  tNetworkQueueCIRLevel TLevelOrDefault
  tNetworkQueueCIRWeight TWeight
  tNetworkQueueMCast TruthValue
  tNetworkQueueExpedite INTEGER
  tNetworkQueueCIR TRatePercent
  tNetworkQueuePIR TPIRRatePercent
  tNetworkQueueCBS TBurstHundredthsOfPercent
  tNetworkQueueMBS TBurstHundredthsOfPercent
  tNetworkQueueHiPrioOnly TBurstPercentOrDefault
  tNetworkQueueLastChanged TimeStamp
  tNetworkQueueUsePortParent TruthValue
  tNetworkQueuePortLvl TLevel
  tNetworkQueuePortWght TWeight
  tNetworkQueuePortCIRLvl TLevelOrDefault
  tNetworkQueuePortCIRWght TWeight
  tNetworkQueuePortAvgOverhead Unsigned32
  tNetworkQueueCIRAdaptation TAdaptationRule
  tNetworkQueuePIRAdaptation TAdaptationRule

TNetworkQueueFCEntry  
SEQUENCE    
  tNetworkQueueFCName TFCName
  tNetworkQueueFCRowStatus RowStatus
  tNetworkQueueFC TQueueId
  tNetworkQueueFCMCast TQueueId
  tNetworkQueueFCLastChanged TimeStamp

TSharedQueuePolicyEntry  
SEQUENCE    
  tSharedQueuePolicy TNamedItem
  tSharedQueuePolicyRowStatus RowStatus
  tSharedQueuePolicyLastChanged TimeStamp
  tSharedQueuePolicyDescription TItemDescription

TSharedQueueEntry  
SEQUENCE    
  tSharedQueueId TQueueId
  tSharedQueueRowStatus RowStatus
  tSharedQueueLastChanged TimeStamp
  tSharedQueuePoolName TNamedItemOrEmpty
  tSharedQueueParent TNamedItemOrEmpty
  tSharedQueueLevel TLevel
  tSharedQueueWeight TWeight
  tSharedQueueCIRLevel TLevelOrDefault
  tSharedQueueCIRWeight TWeight
  tSharedQueueExpedite INTEGER
  tSharedQueueCIR TRatePercent
  tSharedQueuePIR TRatePercent
  tSharedQueueCBS TBurstPercent
  tSharedQueueMBS TBurstPercent
  tSharedQueueHiPrioOnly TBurstPercentOrDefault
  tSharedQueueIsMultipoint TruthValue

TSharedQueueFCEntry  
SEQUENCE    
  tSharedQueueFCName TFCName
  tSharedQueueFCRowStatus RowStatus
  tSharedQueueFCLastChanged TimeStamp
  tSharedQueueFCQueue TQueueId
  tSharedQueueFCMCastQueue TQueueId
  tSharedQueueFCBCastQueue TQueueId
  tSharedQueueFCUnknownQueue TQueueId

TSlopePolicyEntry  
SEQUENCE    
  tSlopePolicy TNamedItem
  tSlopeRowStatus RowStatus
  tSlopeDescription TItemDescription
  tSlopeHiAdminStatus INTEGER
  tSlopeHiStartAverage Unsigned32
  tSlopeHiMaxAverage Unsigned32
  tSlopeHiMaxProbability Unsigned32
  tSlopeLoAdminStatus INTEGER
  tSlopeLoStartAverage Unsigned32
  tSlopeLoMaxAverage Unsigned32
  tSlopeLoMaxProbability Unsigned32
  tSlopeTimeAvgFactor Unsigned32
  tSlopeLastChanged TimeStamp

TSchedulerPolicyEntry  
SEQUENCE    
  tSchedulerPolicyName TNamedItem
  tSchedulerPolicyRowStatus RowStatus
  tSchedulerPolicyDescription TItemDescription
  tSchedulerPolicyLastChanged TimeStamp
  tSchedulerPolicyFrameBasedAccnt TruthValue

TVirtualSchedulerEntry  
SEQUENCE    
  tVirtualSchedulerTier INTEGER
  tVirtualSchedulerName TNamedItem
  tVirtualSchedulerRowStatus RowStatus
  tVirtualSchedulerDescription TItemDescription
  tVirtualSchedulerParent TNamedItemOrEmpty
  tVirtualSchedulerLevel TLevel
  tVirtualSchedulerWeight TWeight
  tVirtualSchedulerCIRLevel TLevelOrDefault
  tVirtualSchedulerCIRWeight TWeight
  tVirtualSchedulerPIR TPIRRate
  tVirtualSchedulerCIR TCIRRate
  tVirtualSchedulerSummedCIR TruthValue
  tVirtualSchedulerLastChanged TimeStamp
  tVirtualSchedulerUsePortParent TruthValue
  tVirtualSchedulerPortLvl TLevel
  tVirtualSchedulerPortWght TWeight
  tVirtualSchedulerPortCIRLvl TLevelOrDefault
  tVirtualSchedulerPortCIRWght TWeight

TPortSchedulerPlcyEntry  
SEQUENCE    
  tPortSchedulerPlcyName TNamedItem
  tPortSchedulerPlcyRowStatus RowStatus
  tPortSchedulerPlcyDescription TItemDescription
  tPortSchedulerPlcyLastChanged TimeStamp
  tPortSchedulerPlcyMaxRate TPortSchedulerPIR
  tPortSchedulerPlcyLvl1PIR TPortSchedulerPIR
  tPortSchedulerPlcyLvl1CIR TPortSchedulerCIR
  tPortSchedulerPlcyLvl2PIR TPortSchedulerPIR
  tPortSchedulerPlcyLvl2CIR TPortSchedulerCIR
  tPortSchedulerPlcyLvl3PIR TPortSchedulerPIR
  tPortSchedulerPlcyLvl3CIR TPortSchedulerCIR
  tPortSchedulerPlcyLvl4PIR TPortSchedulerPIR
  tPortSchedulerPlcyLvl4CIR TPortSchedulerCIR
  tPortSchedulerPlcyLvl5PIR TPortSchedulerPIR
  tPortSchedulerPlcyLvl5CIR TPortSchedulerCIR
  tPortSchedulerPlcyLvl6PIR TPortSchedulerPIR
  tPortSchedulerPlcyLvl6CIR TPortSchedulerCIR
  tPortSchedulerPlcyLvl7PIR TPortSchedulerPIR
  tPortSchedulerPlcyLvl7CIR TPortSchedulerCIR
  tPortSchedulerPlcyLvl8PIR TPortSchedulerPIR
  tPortSchedulerPlcyLvl8CIR TPortSchedulerCIR
  tPortSchedulerPlcyOrphanLvl TLevel
  tPortSchedulerPlcyOrphanWeight TWeight
  tPortSchedulerPlcyOrphanCIRLvl TLevelOrDefault
  tPortSchedulerPlcyOrphanCIRWght TWeight

TAtmTdpEntry  
SEQUENCE    
  tAtmTdpIndex AtmTrafficDescrParamIndex
  tAtmTdpSir Unsigned32
  tAtmTdpPir Unsigned32
  tAtmTdpMbs Unsigned32
  tAtmTdpMir Unsigned32
  tAtmTdpShaping INTEGER
  tAtmTdpServCat AtmServiceCategory
  tAtmTdpDescription TItemDescription
  tAtmTdpLastChanged TimeStamp
  tAtmTdpRowStatus RowStatus
  tAtmTdpDescrType TAtmTdpDescrType
  tAtmTdpCdvt Unsigned32
  tAtmTdpPolicing INTEGER
  tAtmTdpCLPTagging INTEGER

TNamedPoolPolicyEntry  
SEQUENCE    
  tNamedPoolPolicyName TNamedItem
  tNamedPoolPolicyRowStatus RowStatus
  tNamedPoolPolicyLastChanged TimeStamp
  tNamedPoolPolicyDescription TItemDescription
  tNamedPoolPolicyQ1DefaultWeight Unsigned32
  tNamedPoolPolicyQ1MdaWeight Unsigned32
  tNamedPoolPolicyQ1PortWeight Unsigned32

TQ1NamedPoolEntry  
SEQUENCE    
  tQ1NamedPoolPolicyName TNamedItem
  tQ1NamedPoolName TNamedItem
  tQ1NamedPoolRowStatus RowStatus
  tQ1NamedPoolLastChanged TimeStamp
  tQ1NamedPoolDescription TItemDescription
  tQ1NamedPoolNetworkAllocWeight Unsigned32
  tQ1NamedPoolAccessAllocWeight Unsigned32
  tQ1NamedPoolSlopePolicy TNamedItemOrEmpty
  tQ1NamedPoolReservedCbs Integer32

Defined Values

timetraQosMIBModule 1.3.6.1.4.1.6527.1.1.3.16
This document is the SNMP MIB module to manage and provision Quality of Service features on Alcatel 7x50 systems. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tQosObjects 1.3.6.1.4.1.6527.3.1.2.16
OBJECT IDENTIFIER    

tQosNotifyPrefix 1.3.6.1.4.1.6527.3.1.3.16
OBJECT IDENTIFIER    

tQosNotifications 1.3.6.1.4.1.6527.3.1.3.16.0
OBJECT IDENTIFIER    

tmnxQosConformance 1.3.6.1.4.1.6527.3.1.1.16
OBJECT IDENTIFIER    

tDSCPObjects 1.3.6.1.4.1.6527.3.1.2.16.1
OBJECT IDENTIFIER    

tFCObjects 1.3.6.1.4.1.6527.3.1.2.16.2
OBJECT IDENTIFIER    

tSapIngressObjects 1.3.6.1.4.1.6527.3.1.2.16.3
OBJECT IDENTIFIER    

tSapEgressObjects 1.3.6.1.4.1.6527.3.1.2.16.4
OBJECT IDENTIFIER    

tNetworkObjects 1.3.6.1.4.1.6527.3.1.2.16.5
OBJECT IDENTIFIER    

tNetworkQueueObjects 1.3.6.1.4.1.6527.3.1.2.16.6
OBJECT IDENTIFIER    

tSharedQueueObjects 1.3.6.1.4.1.6527.3.1.2.16.7
OBJECT IDENTIFIER    

tSlopeObjects 1.3.6.1.4.1.6527.3.1.2.16.10
OBJECT IDENTIFIER    

tSchedulerObjects 1.3.6.1.4.1.6527.3.1.2.16.12
OBJECT IDENTIFIER    

tQosTimeStampObjects 1.3.6.1.4.1.6527.3.1.2.16.20
OBJECT IDENTIFIER    

tAtmTdpObjects 1.3.6.1.4.1.6527.3.1.2.16.21
OBJECT IDENTIFIER    

tPoolObjects 1.3.6.1.4.1.6527.3.1.2.16.22
OBJECT IDENTIFIER    

tDSCPNameTable 1.3.6.1.4.1.6527.3.1.2.16.1.1
A list of all DSCP Names. DSCP Name entries must exist here and be active before they can be referenced elsewhere (e.g. IP filter).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TDSCPNameEntry

tDSCPNameEntry 1.3.6.1.4.1.6527.3.1.2.16.1.1.1
Information about a particular DSCP Name, particularly the DSCP value. It maps a DSCP Name into a DSCP value. Some default entries are created by the agent. Default entries have tDSCPNameStorageType permanent, and can not be deleted. Entries cannot be created by user but may be supported later. An attempt to create a row in this table would return no creation.
Status: current Access: not-accessible
OBJECT-TYPE    
  TDSCPNameEntry  

tDSCPName 1.3.6.1.4.1.6527.3.1.2.16.1.1.1.1
The name assigned to the DSCP Value.
Status: current Access: not-accessible
OBJECT-TYPE    
  TDSCPName  

tDSCPNameRowStatus 1.3.6.1.4.1.6527.3.1.2.16.1.1.1.2
Row Status of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tDSCPNameStorageType 1.3.6.1.4.1.6527.3.1.2.16.1.1.1.3
The storage type of this row in the table.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

tDSCPNameDscpValue 1.3.6.1.4.1.6527.3.1.2.16.1.1.1.4
The DSCP Value.
Status: current Access: read-create
OBJECT-TYPE    
  TDSCPValue  

tDSCPNameLastChanged 1.3.6.1.4.1.6527.3.1.2.16.1.1.1.5
timestamp of last change to this row in tDSCPNameTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tFCNameTable 1.3.6.1.4.1.6527.3.1.2.16.2.1
A list of all Forwarding Class Names. Forwarding Class Name entries must exist here and be active before they can be referenced elsewhere (e.g. qos queue).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TFCNameEntry

tFCNameEntry 1.3.6.1.4.1.6527.3.1.2.16.2.1.1
Information about a particular Forwarding Class Name, particularly the Forwarding Class value. Some default entries are created by the agent. Default entries have tFCStorageType permanent, and can not be deleted. Entries cannot be created by user but maybe supported in future. An attempt to create a row in this table would return no creation.
Status: current Access: not-accessible
OBJECT-TYPE    
  TFCNameEntry  

tFCName 1.3.6.1.4.1.6527.3.1.2.16.2.1.1.1
Forwarding class name.
Status: current Access: not-accessible
OBJECT-TYPE    
  TFCName  

tFCRowStatus 1.3.6.1.4.1.6527.3.1.2.16.2.1.1.2
Row Status of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tFCStorageType 1.3.6.1.4.1.6527.3.1.2.16.2.1.1.3
The storage type of this row in the table.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

tFCValue 1.3.6.1.4.1.6527.3.1.2.16.2.1.1.4
FC Value.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7  

tFCNameLastChanged 1.3.6.1.4.1.6527.3.1.2.16.2.1.1.5
timestamp of last change to this row in tFCNameTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressTable 1.3.6.1.4.1.6527.3.1.2.16.3.1
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressEntry

tSapIngressEntry 1.3.6.1.4.1.6527.3.1.2.16.3.1.1
Information about a particular Sap Ingress Policy. sap-ingress policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressEntry  

tSapIngressIndex 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.1
the policy ID is the index to this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressPolicyID 1..65535  

tSapIngressRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.2
Row Status for the policy. The deletion of this row has an action of removing the dependent rows in the following tables : - tSapIngressQueueTable - tSapIngressDSCPTable - tSapIngressDot1pTable
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressScope 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.3
Scope of the policy. If the scope is 'exclusive', it can only be instantiated once whereas it could have multiple instances if defined as 'exclusive'.
Status: current Access: read-create
OBJECT-TYPE    
  TItemScope  

tSapIngressDescription 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.4
user-provided description of the policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSapIngressDefaultFC 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.5
tSapIngressDefaultFC specifies the forwarding class or the sub forwarding class which should be used for all traffic that does not match a specific classification specified in this SAP ingress QoS policy. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. If not specified explicitly, all traffic will be classified as best-effort 'be'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItem  

tSapIngressDefaultFCPriority 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.6
the priority to assign to traffic ingressing as the default action queue.
Status: current Access: read-create
OBJECT-TYPE    
  TPriority  

tSapIngressMatchCriteria 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.7
indicates which type of match criteria the policy should use. when set to ip(1), the policy looks for match entries in tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable. When set to mac(2), the policy looks for match entries in tSapIngressMacCriteriaTable. the value of tSapIngressMatchCriteria is set when the first match criteria table entry is created. the value is set to none(3) when the last criteria table entry is removed. when tSapIngressMatchCriteria is set to ip(1), no tSapIngressMacCriteriaTable entries can be created. when set to mac(2), no tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable entries can be created.
Status: current Access: read-only
OBJECT-TYPE    
  TMatchCriteria  

tSapIngressLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.1.1.8
timestamp of last change to this row in tSapIngressTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressQueueTable 1.3.6.1.4.1.6527.3.1.2.16.3.2
information about all sap-ingress policies' queues.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressQueueEntry

tSapIngressQueueEntry 1.3.6.1.4.1.6527.3.1.2.16.3.2.1
Information about a particular queue for a sap-ingress policy. Queue (1) is the used as a default for unicast and queue (11) is used as a default for multicast. Both these are created by the agent and can be edited but not removed from the system. Other entries are created by user.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressQueueEntry  

tSapIngressQueue 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.1
The queue ID is used as the secondary index to the table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TIngressQueueId 1..32  

tSapIngressQueueRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.2
Row Status of the entry. This allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressQueueParent 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.3
The scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressQueueLevel 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.4
This specifies the level of priority while feeding to the parent.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tSapIngressQueueWeight 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.5
The weight that needs to be used by the scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSapIngressQueueCIRLevel 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.6
This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tSapIngressQueueCIRWeight 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.7
The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSapIngressQueueMCast 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.8
This object specifies if this is a multicast queue or not.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapIngressQueueExpedite 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.9
tSapIngressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER expedited(1), auto-expedited(2), non-expedited(3)  

tSapIngressQueueCBS 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.10
The amount of reserved buffer space (in kilo bytes) for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

tSapIngressQueueMBS 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.11
The maximum amount of buffer space (in kilo bytes) allowed for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

tSapIngressQueueHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.12
The percentage of buffer space for the queue, used exclusively by high priority packets.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

tSapIngressQueuePIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.13
The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapIngressQueueCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.14
The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapIngressQueueAdminPIR 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.15
The administrative PIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRate  

tSapIngressQueueAdminCIR 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.16
The administrative CIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRRate  

tSapIngressQueueOperPIR 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.17
The operating PIR.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TPIRRate  

tSapIngressQueueOperCIR 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.18
The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TCIRRate  

tSapIngressQueueLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.19
timestamp of last change to this row in tSapIngressQueueTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressQueuePoliced 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.20
tSapIngressQueuePoliced specifies that the out of profile traffic feeding into the physical queue instance should be dropped. tSapIngressQueuePoliced overrides the bandwidth specified by the object tSapIngressQueueAdminCIR.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapIngressQueueMode 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.21
tSapIngressQueueMode specifies the mode in which the queue is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueMode  

tSapIngressQueuePoolName 1.3.6.1.4.1.6527.3.1.2.16.3.2.1.22
The value of tSapIngressQueuePoolName specifies the name of the pool to be applied for SAP ingress queue.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressDSCPTable 1.3.6.1.4.1.6527.3.1.2.16.3.3
a list of all DSCP entries for all sap-ingress policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressDSCPEntry

tSapIngressDSCPEntry 1.3.6.1.4.1.6527.3.1.2.16.3.3.1
Information about a particular DSCP entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. in the event that one policy has multiple entries, and the tSapIngressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tSapIngressDSCP).
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressDSCPEntry  

tSapIngressDSCP 1.3.6.1.4.1.6527.3.1.2.16.3.3.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TDSCPName  

tSapIngressDSCPRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.3.1.2
This object allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressDSCPFC 1.3.6.1.4.1.6527.3.1.2.16.3.3.1.3
tSapIngressDSCPFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDSCPFC is specified explicitly, this match will be ignored for classification purposes.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressDSCPPriority 1.3.6.1.4.1.6527.3.1.2.16.3.3.1.4
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TPriorityOrDefault  

tSapIngressDSCPLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.3.1.5
timestamp of last change to this row in tSapIngressDSCPTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressDot1pTable 1.3.6.1.4.1.6527.3.1.2.16.3.4
a list of all dot1p entries for all sap-ingress policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressDot1pEntry

tSapIngressDot1pEntry 1.3.6.1.4.1.6527.3.1.2.16.3.4.1
Information about a particular dot1p match for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressDot1pEntry  

tSapIngressDot1pValue 1.3.6.1.4.1.6527.3.1.2.16.3.4.1.1
dot1p value to match in the packet. this value is also used as an index so that for any dot1p value there is only one possible disposition queue and priority.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot1PPriority 0..7  

tSapIngressDot1pRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.4.1.2
Row Status for this sap-ingress policy's dot1p entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressDot1pFC 1.3.6.1.4.1.6527.3.1.2.16.3.4.1.3
tSapIngressDot1pFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDot1pFC is specified explicitly, this match will be ignored for classification purposes.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressDot1pPriority 1.3.6.1.4.1.6527.3.1.2.16.3.4.1.4
priority to use for packets that match the dot1p value tSapIngressDot1pValue.
Status: current Access: read-create
OBJECT-TYPE    
  TPriorityOrDefault  

tSapIngressDot1pLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.4.1.5
timestamp of last change to this row in tSapIngressDot1pTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressIPCriteriaTable 1.3.6.1.4.1.6527.3.1.2.16.3.5
information about all sap-ingress policies' ip-criteria entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressIPCriteriaEntry

tSapIngressIPCriteriaEntry 1.3.6.1.4.1.6527.3.1.2.16.3.5.1
Information about a particular ip-criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressIPCriteriaEntry  

tSapIngressIPCriteriaIndex 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.1
unique identifier separates this entry from others in this policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEntryId  

tSapIngressIPCriteriaRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.2
Row Status for the IP Criteria entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressIPCriteriaDescription 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.3
description of this IP criteria entry.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSapIngressIPCriteriaActionFC 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.4
tSapIngressIPCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IP criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressIPCriteriaActionPriority 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.5
priority for packets which match this entry's criteria. when set to default, the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet.
Status: current Access: read-create
OBJECT-TYPE    
  TPriorityOrDefault  

tSapIngressIPCriteriaSourceIpAddr 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.6
IP address to match with source-IP of the packet.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

tSapIngressIPCriteriaSourceIpMask 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.7
the prefix is the number of bits of the source IP address to match.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddressPrefixLength  

tSapIngressIPCriteriaDestIpAddr 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.8
IP address to match with destination-IP of the packet.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

tSapIngressIPCriteriaDestIpMask 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.9
the prefix is the number of bits of the destination IP address to match.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddressPrefixLength  

tSapIngressIPCriteriaProtocol 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.10
IP protocol to match. use -1 to disable matching by IP protocol.
Status: current Access: read-create
OBJECT-TYPE    
  TIpProtocol  

tSapIngressIPCriteriaSourcePortValue1 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.11
TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPCriteriaSourcePortValue2 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.12
TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPCriteriaSourcePortOperator 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.13
The operator specifies the manner in which tSapIngressIPCriteriaSourcePortValue1 and tSapIngressIPCriteriaSourcePortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaSourcePortOperator is used as described in TTcpUdpPortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPortOperator  

tSapIngressIPCriteriaDestPortValue1 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.14
TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPCriteriaDestPortValue2 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.15
TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPCriteriaDestPortOperator 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.16
The operator specifies the manner in which tSapIngressIPCriteriaDestPortValue1 and tSapIngressIPCriteriaDestPortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaDestPortOperator is used as described in TTcpUdpPortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPortOperator  

tSapIngressIPCriteriaDSCP 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.17
DSCP value to match in the packet
Status: current Access: read-create
OBJECT-TYPE    
  TDSCPNameOrEmpty  

tSapIngressIPCriteriaFragment 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.19
matches when the packet is a fragment (true) or when the packet is not a fragment (false) or matches all packets fragmented or not (off).
Status: current Access: read-create
OBJECT-TYPE    
  TItemMatch  

tSapIngressIPCriteriaLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.5.1.20
timestamp of last change to this row in tSapIngressIPCriteriaTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressMacCriteriaTable 1.3.6.1.4.1.6527.3.1.2.16.3.6
information about all sap-ingress policies' mac-criteria entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressMacCriteriaEntry

tSapIngressMacCriteriaEntry 1.3.6.1.4.1.6527.3.1.2.16.3.6.1
Information about a particular mac-criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressMacCriteriaEntry  

tSapIngressMacCriteriaIndex 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TEntryId  

tSapIngressMacCriteriaRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.2
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressMacCriteriaDescription 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSapIngressMacCriteriaActionFC 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.4
tSapIngressMacCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Mac criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressMacCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressMacCriteriaActionPriority 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.5
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TPriorityOrDefault  

tSapIngressMacCriteriaFrameType 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.6
The type of mac frame for which we are defining this match criteria.
Status: current Access: read-create
OBJECT-TYPE    
  TFrameType  

tSapIngressMacCriteriaSrcMacAddr 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.8
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

tSapIngressMacCriteriaSrcMacMask 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.9
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

tSapIngressMacCriteriaDstMacAddr 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.10
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

tSapIngressMacCriteriaDstMacMask 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.11
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

tSapIngressMacCriteriaDot1PValue 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.12
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  Dot1PPriority  

tSapIngressMacCriteriaDot1PMask 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.13
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  Dot1PPriority  

tSapIngressMacCriteriaEthernetType 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.14
the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 1536..65535  

tSapIngressMacCriteriaDSAP 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.15
the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAccessPoint  

tSapIngressMacCriteriaDSAPMask 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.16
the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAccessPoint  

tSapIngressMacCriteriaSSAP 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.17
the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAccessPoint  

tSapIngressMacCriteriaSSAPMask 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.18
the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
Status: current Access: read-create
OBJECT-TYPE    
  ServiceAccessPoint  

tSapIngressMacCriteriaSnapPid 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.19
the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..65535  

tSapIngressMacCriteriaSnapOui 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.20
whether to match snap-oui, and what to match.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER off(1), zero(2), nonZero(3)  

tSapIngressMacCriteriaLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.6.1.21
timestamp of last change to this row in tSapIngressMacCriteriaTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressFCTable 1.3.6.1.4.1.6527.3.1.2.16.3.7
This table maintains the mapping of a particular forwarding class traffic into the specified queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressFCEntry

tSapIngressFCEntry 1.3.6.1.4.1.6527.3.1.2.16.3.7.1
Information about a particular sap-ingress policy's forwarding class mappings to queues. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressFCEntry  

tSapIngressFCName 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.1
tSapIngressFCName specifies the forwarding class or the sub forwarding class for which this mapping is defined. A sub forwarding class mapping can also be configured. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] A sub forwarding class mapping should exist in this table if any explicit match criteria in this SAP ingress QoS policy try to use it. However, it is not the same for the base forwarding classes.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tSapIngressFCRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.2
Row Status for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressFCQueue 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.3
The specific queue to be used for packets in this forwarding class. A value of zero implies that the default queues should be used.
Status: current Access: read-create
OBJECT-TYPE    
  TIngressQueueId  

tSapIngressFCMCastQueue 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.4
The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default queues should be used.
Status: current Access: read-create
OBJECT-TYPE    
  TIngressQueueId  

tSapIngressFCBCastQueue 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.5
The specific broadcast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default queues should be used.
Status: current Access: read-create
OBJECT-TYPE    
  TIngressQueueId  

tSapIngressFCUnknownQueue 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.6
The specific unknown destination queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default queues should be used.
Status: current Access: read-create
OBJECT-TYPE    
  TIngressQueueId  

tSapIngressFCLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.7
tSapIngressFCLastChanged indicates the value of sysUpTime when the forwarding class entry was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressFCInProfRemark 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.8
tSapIngressFCInProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues.
Status: current Access: read-create
OBJECT-TYPE    
  TRemarkType  

tSapIngressFCInProfDscp 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.9
tSapIngressFCInProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'dscp'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressFCInProfPrec 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.10
tSapIngressFCInProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'precedence'.
Status: current Access: read-create
OBJECT-TYPE    
  TPrecValueOrNone  

tSapIngressFCOutProfRemark 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.11
tSapIngressFCOutProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues.
Status: current Access: read-create
OBJECT-TYPE    
  TRemarkType  

tSapIngressFCOutProfDscp 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.12
tSapIngressFCOutProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'dscp'.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressFCOutProfPrec 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.13
tSapIngressFCOutProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'precedence'.
Status: current Access: read-create
OBJECT-TYPE    
  TPrecValueOrNone  

tSapIngressFCProfile 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.14
tSapIngressFCProfile specifies the profile of the packets associated with this forwarding class. This object can not be set to anything but 'none' if the queues being used by this mapping do not have their modes, tSapIngressQueueMode set to 'profile'.
Status: current Access: read-create
OBJECT-TYPE    
  TProfileOrNone  

tSapIngressFCDE1OutOfProfile 1.3.6.1.4.1.6527.3.1.2.16.3.7.1.18
The value of tSapIngressFCDE1OutOfProfile specifies whether frames with DE value of '1' are to be treated as out-of-profile (as if tSapIngressFCProfile was set to 'out'). When tSapIngressFCDE1OutOfProfile is set to 'true', frames with DE value of '1' are autmatically classified as out-of-profile. Frames with DE value of '0' will continue to be policed based on the value of tSapIngressQueueAdminCIR. That is, if the dynamic rate of ingress queue is within CIR, frames with DE=0 will be treated as in-profile (as if tSapIngressFCProfile was set to 'in') otherwise these frames are treated as out-of-profile. When tSapIngressFCDE1OutOfProfile is set to 'true', it supercedes action specified by the value of tSapIngressFCProfile.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapIngressPrecTable 1.3.6.1.4.1.6527.3.1.2.16.3.8
This table maintains the mapping of a particular precedence value into a forwarding class
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressPrecEntry

tSapIngressPrecEntry 1.3.6.1.4.1.6527.3.1.2.16.3.8.1
Information about a particular sap-ingress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressPrecEntry  

tSapIngressPrecValue 1.3.6.1.4.1.6527.3.1.2.16.3.8.1.1
Precedence value for which the mapping is done.
Status: current Access: not-accessible
OBJECT-TYPE    
  TPrecValue  

tSapIngressPrecRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.8.1.2
Row Status for this mapping.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressPrecFC 1.3.6.1.4.1.6527.3.1.2.16.3.8.1.3
tSapIngressPrecFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressPrecFC is specified explicitly, this match will be ignored for classification purposes.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressPrecFCPriority 1.3.6.1.4.1.6527.3.1.2.16.3.8.1.4
The priority to be assigned to the matching traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TPriorityOrDefault  

tSapIngressPrecLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.8.1.5
timestamp of last change to this row in tSapIngressPrecTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressIPv6CriteriaTable 1.3.6.1.4.1.6527.3.1.2.16.3.9
Information about all sap-ingress policies' ipv6-criteria entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapIngressIPv6CriteriaEntry

tSapIngressIPv6CriteriaEntry 1.3.6.1.4.1.6527.3.1.2.16.3.9.1
Information about a particular ipv6-criteria entry for a sap-ingress policy. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapIngressIPv6CriteriaEntry  

tSapIngressIPv6CriteriaIndex 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.1
The value of the object tSapIngressIPv6CriteriaIndex specifies uniquely each entry in the policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEntryId  

tSapIngressIPv6CriteriaRowStatus 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.2
The value of the object tSapIngressIPv6CriteriaRowStatus specifies the Row Status for the IPv6 Criteria entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapIngressIPv6CriteriaDescription 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.3
The value of the object tSapIngressIPv6CriteriaDescription specifies an optional user provided description of this IPv6 criteria entry.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSapIngressIPv6CriteriaActionFC 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.4
The value of the object tSapIngressIPv6CriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IPv6 criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPv6CriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapIngressIPv6CriteriaActionPriority 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.5
The value of the object tSapIngressIPv6CriteriaActionPriority specifies the priority for packets which match this entry's criteria. When set to 'default', the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet.
Status: current Access: read-create
OBJECT-TYPE    
  TPriorityOrDefault  

tSapIngressIPv6CriteriaSourceIpAddr 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.6
The value of the object tSapIngressIPv6CriteriaSourceIpAddr specifies the IPv6 address to match with source-IPv6 of the packet.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv6  

tSapIngressIPv6CriteriaSourceIpMask 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.7
The value of the object tSapIngressIPv6CriteriaSourceIpMask specifies the prefix is the number of bits of the source IPv6 address to match.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength 0..128  

tSapIngressIPv6CriteriaDestIpAddr 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.8
The value of the object tSapIngressIPv6CriteriaDestIpAddr specifies the IPv6 address to match with destination-IPv6 of the packet.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv6  

tSapIngressIPv6CriteriaDestIpMask 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.9
The value of the object tSapIngressIPv6CriteriaDestIpMask specifies the prefix is the number of bits of the destination IPv6 address to match.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressPrefixLength 0..128  

tSapIngressIPv6CriteriaNextHeader 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.10
The value of the object tSapIngressIPv6CriteriaNextHeader specifies the Next Header to match. use -1 to disable matching by Next Header. Because the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60.
Status: current Access: read-create
OBJECT-TYPE    
  TIpProtocol  

tSapIngressIPv6CriteriaSourcePortValue1 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.11
The value of the object tSapIngressIPv6CriteriaSourcePortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPv6CriteriaSourcePortValue2 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.12
The value of the object tSapIngressIPv6CriteriaSourcePortValue2 specifies TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPv6CriteriaSourcePortOperator 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.13
The value of the object tSapIngressIPv6CriteriaSourcePortOperator specifies The operator specifies the manner in which tSapIngressIPv6CriteriaSourcePortValue1 and tSapIngressIPv6CriteriaSourcePortValue2 are to be used.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPortOperator  

tSapIngressIPv6CriteriaDestPortValue1 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.14
The value of the object tSapIngressIPv6CriteriaDestPortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPv6CriteriaDestPortValue2 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.15
The value of the object tSapIngressIPv6CriteriaDestPortValue2 specifies the TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPort  

tSapIngressIPv6CriteriaDestPortOperator 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.16
The value of the object tSapIngressIPv6CriteriaDestPortOperator specifies the manner in which tSapIngressIPv6CriteriaDestPortValue1 and tSapIngressIPv6CriteriaDestPortValue2 are to be used.
Status: current Access: read-create
OBJECT-TYPE    
  TTcpUdpPortOperator  

tSapIngressIPv6CriteriaDSCP 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.17
The value of the object tSapIngressIPv6CriteriaDSCP specifies the DSCP value to match in the packet
Status: current Access: read-create
OBJECT-TYPE    
  TDSCPNameOrEmpty  

tSapIngressIPv6CriteriaLastChanged 1.3.6.1.4.1.6527.3.1.2.16.3.9.1.20
The value of the object indicates timestamp of last change to this row in tSapIngressIPv6CriteriaTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressTable 1.3.6.1.4.1.6527.3.1.2.16.4.1
information about all sap-egress policies.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapEgressEntry

tSapEgressEntry 1.3.6.1.4.1.6527.3.1.2.16.4.1.1
Information about a particular sap-egress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. the default sap-egress policy (1) cannot be changed or destroyed.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressEntry  

tSapEgressIndex 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.1
the sap-egress policy ID is used as index for the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressPolicyID  

tSapEgressRowStatus 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.2
Row Status of this policy's entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapEgressScope 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.3
scope of the sap-egress policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemScope  

tSapEgressDescription 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.4
user-supplied description of this sap-egress policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSapEgressLastChanged 1.3.6.1.4.1.6527.3.1.2.16.4.1.1.5
timestamp of last change to this row in tSapEgressTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressQueueTable 1.3.6.1.4.1.6527.3.1.2.16.4.2
information about all sap-egress policies' queues.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapEgressQueueEntry

tSapEgressQueueEntry 1.3.6.1.4.1.6527.3.1.2.16.4.2.1
Information about a particular sap-egress queue. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressQueueEntry  

tSapEgressQueueIndex 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.1
the number of a queue. zero is not allowed. for sap-egress, only three queues are allowed, so the queue index range is restricted.
Status: current Access: not-accessible
OBJECT-TYPE    
  TEgressQueueId 1..8  

tSapEgressQueueRowStatus 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.2
Row Status of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapEgressQueueParent 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.3
The scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapEgressQueueLevel 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.4
This specifies the level of priority while feeding to the parent.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tSapEgressQueueWeight 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.5
The weight that needs to be used by the scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSapEgressQueueCIRLevel 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.6
This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tSapEgressQueueCIRWeight 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.7
The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSapEgressQueueExpedite 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.8
tSapEgressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER expedited(1), auto-expedited(2), non-expedited(3)  

tSapEgressQueueCBS 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.9
The amount of reserved buffer space (in kilo bytes) for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

tSapEgressQueueMBS 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.10
The maximum amount of buffer space (in kilo bytes) allowed for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstSize  

tSapEgressQueueHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.11
The percentage of buffer space for the queue, used exclusively by high priority packets.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

tSapEgressQueuePIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.12
The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapEgressQueueCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.13
The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tSapEgressQueueAdminPIR 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.14
The administrative PIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRate  

tSapEgressQueueAdminCIR 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.15
The administrative CIR specified by the user.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRRate  

tSapEgressQueueOperPIR 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.16
The administrative PIR specified by the user.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TPIRRate  

tSapEgressQueueOperCIR 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.17
The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TCIRRate  

tSapEgressQueueLastChanged 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.18
timestamp of last change to this row in tSapEgressQueueTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressQueueUsePortParent 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.19
The value of the object tSapEgressQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this SAP egress queue is parented by a port-level scheduler. This object is mutually exclusive with tSapEgressQueueParent. Only one kind of parent is allowed.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapEgressQueuePortLvl 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.20
The value of the object tSapEgressQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tSapEgressQueuePortWght 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.21
The value of the object tSapEgressQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSapEgressQueuePortCIRLvl 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.22
The value of the object tSapEgressQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tSapEgressQueuePortCIRWght 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.23
The value of the object tSapEgressQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSapEgressQueuePortAvgOverhead 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.24
The value of tSapEgressQueuePortAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

tSapEgressQueuePoolName 1.3.6.1.4.1.6527.3.1.2.16.4.2.1.25
The value of tSapEgressQueuePoolName specifies the name of the pool to be applied for SAP egress queue.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapEgressFCTable 1.3.6.1.4.1.6527.3.1.2.16.4.3
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSapEgressFCEntry

tSapEgressFCEntry 1.3.6.1.4.1.6527.3.1.2.16.4.3.1
Information about a particular sap-egress policy's forwarding class mappings to queues and dot1p values. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSapEgressFCEntry  

tSapEgressFCName 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.1
forwarding class name.
Status: current Access: not-accessible
OBJECT-TYPE    
  TFCName  

tSapEgressFCRowStatus 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.2
Row Status for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSapEgressFCQueue 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.3
The queue to use for packets in this forwarding class. No FC can map to the same queue being used by 'premium' class. You must specify a valid queue-id before setting the row status to active.
Status: current Access: read-create
OBJECT-TYPE    
  TEgressQueueId  

tSapEgressFCDot1PValue 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.4
The value of tSapEgressFCDot1PValue specifies 802.1p value to use for packets in this forwarding class. This object has been replaced by tSapEgressFCDot1PInProfile and tSapEgressFCDot1POutProfile objects.
Status: obsolete Access: read-create
OBJECT-TYPE    
  Dot1PPriority  

tSapEgressFCLastChanged 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.5
timestamp of last change to this row in tSapEgressFCTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressFCDot1PInProfile 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.8
The value of tSapEgressFCDot1PInProfile specifies 802.1p value to set for in-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1POutProfile object is set to '-1'.
Status: current Access: read-create
OBJECT-TYPE    
  Dot1PPriority  

tSapEgressFCDot1POutProfile 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.9
The value of tSapEgressFCDot1POutProfile specifies 802.1p value to set for out-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1PInProfile object is set to '-1'.
Status: current Access: read-create
OBJECT-TYPE    
  Dot1PPriority  

tSapEgressFCForceDEValue 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.10
The value of tSapEgressFCForceDEValue specifies the DE value to set for all the frames of this forwarding class regardless of frame's profile status. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDEMark object is set to 'false'.
Status: current Access: read-create
OBJECT-TYPE    
  TDEValue  

tSapEgressFCDEMark 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.11
The value of tSapEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tSapEgressFCForceDEValue object is not set to '-1'.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSapEgressFCInProfDscp 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.12
The value of tSapEgressFCInProfDscp specifies the DSCP name to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCInProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapEgressFCOutProfDscp 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.13
The value of tSapEgressFCOutProfDscp specifies the DSCP name to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCOutProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSapEgressFCInProfPrec 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.14
The value of tSapEgressFCInProfPrec specifies the precedence value to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values.
Status: current Access: read-create
OBJECT-TYPE    
  TPrecValueOrNone  

tSapEgressFCOutProfPrec 1.3.6.1.4.1.6527.3.1.2.16.4.3.1.15
The value of tSapEgressFCOutProfPrec specifies the precedence value to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values.
Status: current Access: read-create
OBJECT-TYPE    
  TPrecValueOrNone  

tNetworkPolicyTable 1.3.6.1.4.1.6527.3.1.2.16.5.1
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkPolicyEntry

tNetworkPolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.5.1.1
Information about a particular Network Policy. network policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. The default Egress FC entries are created as an action of setting the rowstatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkPolicyEntry  

tNetworkPolicyIndex 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkPolicyID  

tNetworkPolicyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.2
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkPolicyScope 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.5
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TItemScope  

tNetworkPolicyDescription 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.6
tNetworkPolicyDescription holds the description for this policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tNetworkPolicyIngressDefaultActionFC 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.7
tNetworkPolicyIngressDefaultActionFC specifies the default forwarding class to be used while classifying the ingress traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TFCName  

tNetworkPolicyIngressDefaultActionProfile 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.8
tNetworkPolicyIngressDefaultActionProfile specifies the default profile to be used for the ingressing traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TProfile  

tNetworkPolicyEgressRemark 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.9
The object tNetworkPolicyEgressRemark specifies if the system will remark the egress packets or not.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tNetworkPolicyLastChanged 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.10
Timestamp of last change to this row in tNetworkPolicyTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkPolicyIngressLerUseDscp 1.3.6.1.4.1.6527.3.1.2.16.5.1.1.11
The object has significance only for the label edge routers which should honor the DSCP markings instead of the LSPEXP bits.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tNetworkIngressDSCPTable 1.3.6.1.4.1.6527.3.1.2.16.5.2
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkIngressDSCPEntry

tNetworkIngressDSCPEntry 1.3.6.1.4.1.6527.3.1.2.16.5.2.1
Information about a dscp map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkIngressDSCPEntry  

tNetworkIngressDSCP 1.3.6.1.4.1.6527.3.1.2.16.5.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TDSCPName  

tNetworkIngressDSCPRowStatus 1.3.6.1.4.1.6527.3.1.2.16.5.2.1.2
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkIngressDSCPFC 1.3.6.1.4.1.6527.3.1.2.16.5.2.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TFCNameOrEmpty  

tNetworkIngressDSCPProfile 1.3.6.1.4.1.6527.3.1.2.16.5.2.1.4
there is no DEFVAL for this object. it must be deliberately set before activating the row.
Status: current Access: read-create
OBJECT-TYPE    
  TProfile  

tNetworkIngressDSCPLastChanged 1.3.6.1.4.1.6527.3.1.2.16.5.2.1.5
timestamp of last change to this row in tNetworkIngressDSCPTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkIngressDot1pTable 1.3.6.1.4.1.6527.3.1.2.16.5.3
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkIngressDot1pEntry

tNetworkIngressDot1pEntry 1.3.6.1.4.1.6527.3.1.2.16.5.3.1
Information about a dot1p map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkIngressDot1pEntry  

tNetworkIngressDot1pValue 1.3.6.1.4.1.6527.3.1.2.16.5.3.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot1PPriority 0..7  

tNetworkIngressDot1pRowStatus 1.3.6.1.4.1.6527.3.1.2.16.5.3.1.2
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkIngressDot1pFC 1.3.6.1.4.1.6527.3.1.2.16.5.3.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TFCNameOrEmpty  

tNetworkIngressDot1pProfile 1.3.6.1.4.1.6527.3.1.2.16.5.3.1.4
there is no DEFVAL for this object. It must be deliberately set before activating the row.
Status: current Access: read-create
OBJECT-TYPE    
  TDEProfile  

tNetworkIngressDot1pLastChanged 1.3.6.1.4.1.6527.3.1.2.16.5.3.1.5
timestamp of last change to this row in tNetworkIngressDot1pTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkIngressLSPEXPTable 1.3.6.1.4.1.6527.3.1.2.16.5.4
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkIngressLSPEXPEntry

tNetworkIngressLSPEXPEntry 1.3.6.1.4.1.6527.3.1.2.16.5.4.1
Information about LSP EXP mapping for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkIngressLSPEXPEntry  

tNetworkIngressLSPEXP 1.3.6.1.4.1.6527.3.1.2.16.5.4.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TLspExpValue 0..7  

tNetworkIngressLSPEXPRowStatus 1.3.6.1.4.1.6527.3.1.2.16.5.4.1.2
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkIngressLSPEXPFC 1.3.6.1.4.1.6527.3.1.2.16.5.4.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TFCNameOrEmpty  

tNetworkIngressLSPEXPProfile 1.3.6.1.4.1.6527.3.1.2.16.5.4.1.4
there is no DEFVAL for this object. it must be deliberately set before activating the row.
Status: current Access: read-create
OBJECT-TYPE    
  TProfile  

tNetworkIngressLSPEXPLastChanged 1.3.6.1.4.1.6527.3.1.2.16.5.4.1.5
timestamp of last change to this row in tNetworkIngressLSPEXPTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkEgressFCTable 1.3.6.1.4.1.6527.3.1.2.16.5.7
Information about all network policies' egress FC traffic disposition.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkEgressFCEntry

tNetworkEgressFCEntry 1.3.6.1.4.1.6527.3.1.2.16.5.7.1
Information about a particular network policy's egress per-forwarding-class traffic disposition. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkEgressFCEntry  

tNetworkEgressFCName 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.1
the name of the forwarding class (FC).
Status: current Access: not-accessible
OBJECT-TYPE    
  TFCName  

tNetworkEgressFCDSCPInProfile 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.2
the DSCP to use for in-profile traffic.
Status: current Access: read-write
OBJECT-TYPE    
  TDSCPNameOrEmpty  

tNetworkEgressFCDSCPOutProfile 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.3
the DSCP to use for out-of-profile traffic.
Status: current Access: read-write
OBJECT-TYPE    
  TDSCPNameOrEmpty  

tNetworkEgressFCLspExpInProfile 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.4
the lsp-exp value to use for in-profile traffic.
Status: current Access: read-write
OBJECT-TYPE    
  TLspExpValue  

tNetworkEgressFCLspExpOutProfile 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.5
the lsp-exp value to use for out-of-profile traffic.
Status: current Access: read-write
OBJECT-TYPE    
  TLspExpValue  

tNetworkEgressFCDot1pInProfile 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.6
the Dot1p to use for in-profile traffic.
Status: current Access: read-write
OBJECT-TYPE    
  Dot1PPriority  

tNetworkEgressFCDot1pOutProfile 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.7
the Dot1p to use for out-of-profile traffic.
Status: current Access: read-write
OBJECT-TYPE    
  Dot1PPriority  

tNetworkEgressFCLastChanged 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.8
timestamp of last change to this row in tNetworkEgressFCTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkEgressFCForceDEValue 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.9
The value of tNetworkEgressFCForceDEValue specifies the DE value to set for network egress packets in this forwarding class regardless of profile status of the frames. An inconsistentValue error is returned if this object is set to any value other than '-1', when tNetworkEgressFCDEMark object is set to 'false'.
Status: current Access: read-write
OBJECT-TYPE    
  TDEValue  

tNetworkEgressFCDEMark 1.3.6.1.4.1.6527.3.1.2.16.5.7.1.10
The value of tNetworkEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tNetworkEgressFCForceDEValue object is not set to '-1'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tNetworkQueuePolicyTable 1.3.6.1.4.1.6527.3.1.2.16.6.1
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkQueuePolicyEntry

tNetworkQueuePolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.6.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkQueuePolicyEntry  

tNetworkQueuePolicy 1.3.6.1.4.1.6527.3.1.2.16.6.1.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tNetworkQueuePolicyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.6.1.1.2
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkQueuePolicyDescription 1.3.6.1.4.1.6527.3.1.2.16.6.1.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tNetworkQueuePolicyLastChanged 1.3.6.1.4.1.6527.3.1.2.16.6.1.1.8
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkQueueTable 1.3.6.1.4.1.6527.3.1.2.16.6.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkQueueEntry

tNetworkQueueEntry 1.3.6.1.4.1.6527.3.1.2.16.6.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkQueueEntry  

tNetworkQueue 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.1
The queue ID is used as the secondary index to the table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQueueId 1..16  

tNetworkQueueRowStatus 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.2
Row Status of the entry. This allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkQueuePoolName 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.3
The tNetworkQueuePoolName specifies the pool that is associated with this network queue. If tNetworkQueuePoolName is empty, no pool has been associated with the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tNetworkQueueParent 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.4
The scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tNetworkQueueLevel 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.5
This specifies the level of priority while feeding to the parent.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tNetworkQueueWeight 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.6
The weight that needs to be used by the scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tNetworkQueueCIRLevel 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.7
This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tNetworkQueueCIRWeight 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.8
The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tNetworkQueueMCast 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.9
This object specifies if this is a multicast queue or not.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tNetworkQueueExpedite 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.10
tNetworkQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER expedited(1), auto-expedited(2), non-expedited(3)  

tNetworkQueueCIR 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.11
The percentage of max rate allowed.
Status: current Access: read-create
OBJECT-TYPE    
  TRatePercent  

tNetworkQueuePIR 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.12
The percentage of max rate allowed.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRatePercent  

tNetworkQueueCBS 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.13
The percentage of reserved buffer space for the queue, defined to two decimal places.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstHundredthsOfPercent  

tNetworkQueueMBS 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.14
The percentage of reserved buffer space for the queue, defined to two decimal places.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstHundredthsOfPercent  

tNetworkQueueHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.15
The percentage of buffer space for the queue, used exclusively by high priority packets.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

tNetworkQueueLastChanged 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.16
The value of the object tNetworkQueueLastChanged indicates the timestamp of last change to this row in tNetworkQueueTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkQueueUsePortParent 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.17
The value of the object tNetworkQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this network queue is parented by a port-level scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tNetworkQueuePortLvl 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.18
The value of the object tNetworkQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tNetworkQueuePortWght 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.19
The value of the object tNetworkQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tNetworkQueuePortCIRLvl 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.20
The value of the object tNetworkQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tNetworkQueuePortCIRWght 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.21
The value of the object tNetworkQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tNetworkQueuePortAvgOverhead 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.22
The value of tNetworkQueuePortAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..10000  

tNetworkQueueCIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.23
The value of tNetworkQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tNetworkQueuePIRAdaptation 1.3.6.1.4.1.6527.3.1.2.16.6.2.1.24
The value of tNetworkQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.
Status: current Access: read-create
OBJECT-TYPE    
  TAdaptationRule  

tNetworkQueueFCTable 1.3.6.1.4.1.6527.3.1.2.16.6.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNetworkQueueFCEntry

tNetworkQueueFCEntry 1.3.6.1.4.1.6527.3.1.2.16.6.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  TNetworkQueueFCEntry  

tNetworkQueueFCName 1.3.6.1.4.1.6527.3.1.2.16.6.3.1.1
Forwarding class name.
Status: current Access: not-accessible
OBJECT-TYPE    
  TFCName  

tNetworkQueueFCRowStatus 1.3.6.1.4.1.6527.3.1.2.16.6.3.1.2
Row Status for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNetworkQueueFC 1.3.6.1.4.1.6527.3.1.2.16.6.3.1.3
The specific queue to be used for packets in this forwarding class.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueId 1..16  

tNetworkQueueFCMCast 1.3.6.1.4.1.6527.3.1.2.16.6.3.1.4
The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueId 1..16  

tNetworkQueueFCLastChanged 1.3.6.1.4.1.6527.3.1.2.16.6.3.1.7
timestamp of last change to this row in tNetworkQueueFCTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSharedQueuePolicyTable 1.3.6.1.4.1.6527.3.1.2.16.7.1
Defines the Alcatel 7x50 SR series Shared Queue Policy Table for providing, via SNMP, the capability of defining the queue policies. tSharedQueuePolicyTable holds a list of all shared queue policies in the managed system. Shared queue policies should exist in this table before being referenced elsewhere. There is a default queue policy 'default' created by the agent and can not be deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSharedQueuePolicyEntry

tSharedQueuePolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.7.1.1
Defines an entry in the tSharedQueuePolicyTable. Entries are created and deleted in this table by SNMP sets to tSharedQueuePolicyRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSharedQueuePolicyEntry  

tSharedQueuePolicy 1.3.6.1.4.1.6527.3.1.2.16.7.1.1.1
tSharedQueuePolicy serves as an index and uniquely identifies a queue policy in the managed system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tSharedQueuePolicyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.7.1.1.2
tSharedQueuePolicyRowStatus allows entries to be created and deleted in the tSharedQueuePolicyTable. The deletion of an entry in this table will fail if the action is performed on the default policy or the policy is being used within the system.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSharedQueuePolicyLastChanged 1.3.6.1.4.1.6527.3.1.2.16.7.1.1.3
tSharedQueuePolicyLastChanged indicates the value of sysUpTime when the queue policy entry was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSharedQueuePolicyDescription 1.3.6.1.4.1.6527.3.1.2.16.7.1.1.4
tSharedQueuePolicyDescription specifies the user provided description string for this queue policy entry. It can consist of only the printable, seven-bit ASCII characters.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSharedQueueTable 1.3.6.1.4.1.6527.3.1.2.16.7.2
Defines the Alcatel 7x50 SR series Shared Queue Table for providing, via SNMP, the capability of defining the queues for the shared queue policies existing in the tSharedQueuePolicyTable. tSharedQueueTable holds a list of all the shared queues in the managed system defined for the queue policies. Queues should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSharedQueueFCTable. There is a default queue with the queue identifier '1' which gets created automatically when a new queue policy is created.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSharedQueueEntry

tSharedQueueEntry 1.3.6.1.4.1.6527.3.1.2.16.7.2.1
Defines an entry in the tSharedQueueTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueRowStatus. An exception to this rule is the default queue. The default queue is created/deleted as a result of the creation/deletion of a new queue policy in the tSharedQueuePolicyTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSharedQueueEntry  

tSharedQueueId 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.1
tSharedQueueId serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a shared queue in the managed system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQueueId 1..32  

tSharedQueueRowStatus 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.2
tSharedQueueRowStatus allows entries to be created and deleted in the tSharedQueueTable. The deletion of an entry in this table will fail if the action is performed on the default queue or if the queue is being referenced by a forwarding class mapping in the queue policy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSharedQueueLastChanged 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.3
tSharedQueueLastChanged indicates the value of sysUpTime when the queue entry was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSharedQueuePoolName 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.4
tSharedQueuePoolName specifies the pool from which the queue should be allocating its buffer. By default it will share the default pool being used by the entity where the queue is instantiated.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSharedQueueParent 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.5
tSharedQueueParent specifies the scheduler to which this queue should be feeding into. By default there would be no parent for the queue and it will be controlled by the entity where the queue is instantiated.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tSharedQueueLevel 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.6
tSharedQueueLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is exceeding the committed rate.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tSharedQueueWeight 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.7
tSharedQueueWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is exceeding the committed rate.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSharedQueueCIRLevel 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.8
tSharedQueueCIRLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is conforming to the committed rate. The level '0' means treat all offered load for this queue same as the load which is exceeding the committed rate.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tSharedQueueCIRWeight 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.9
tSharedQueueCIRWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is conforming to the committed rate.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tSharedQueueExpedite 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.10
tSharedQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER expedited(1), auto-expedited(2), non-expedited(3)  

tSharedQueueCIR 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.11
tSharedQueueCIR specifies the committed rate as a percentage of maximum rate for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TRatePercent  

tSharedQueuePIR 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.12
tSharedQueuePIR specifies the peak rate as a percentage of maximum rate for this queue.
Status: current Access: read-create
OBJECT-TYPE    
  TRatePercent  

tSharedQueueCBS 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.13
tSharedQueueCBS specifies the committed burst size as a percentage of maximum reserved buffer space for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercent  

tSharedQueueMBS 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.14
tSharedQueueMBS specifies the maximum burst size as a percentage of maximum reserved buffer space for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercent  

tSharedQueueHiPrioOnly 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.15
tSharedQueueHiPrioOnly specifies the percentage of buffer space to be exclusively by high priority packets as a percentage of maximum reserved buffer space for the queue.
Status: current Access: read-create
OBJECT-TYPE    
  TBurstPercentOrDefault  

tSharedQueueIsMultipoint 1.3.6.1.4.1.6527.3.1.2.16.7.2.1.16
The value of tSharedQueueIsMultipoint specifies whether this shared queue is a multipoint-shared queue. This object can only be set at row creation time.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tSharedQueueFCTable 1.3.6.1.4.1.6527.3.1.2.16.7.3
Defines the Alcatel 7x50 SR series forwarding class to shared queue mapping table for providing, via SNMP, the capability of defining the forwarding class to shared queue mapping for the queue policies existing in the tSharedQueuePolicyTable. tSharedQueueFCTable holds a list of forwarding class to queue mappings managed system defined for the queue policies. The forwarding classes which are not existing in this table should use the default shared queue for this policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSharedQueueFCEntry

tSharedQueueFCEntry 1.3.6.1.4.1.6527.3.1.2.16.7.3.1
Defines an entry in the tSharedQueueFCTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueFCRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSharedQueueFCEntry  

tSharedQueueFCName 1.3.6.1.4.1.6527.3.1.2.16.7.3.1.1
tSharedQueueFCName serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a forwarding class to queue mapping in the managed system.
Status: current Access: not-accessible
OBJECT-TYPE    
  TFCName  

tSharedQueueFCRowStatus 1.3.6.1.4.1.6527.3.1.2.16.7.3.1.2
tSharedQueueFCRowStatus allows entries to be created and deleted in the tSharedQueueFCTable. Deletion of an entry from this table will cause the forwarding class to use the default mapping.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSharedQueueFCLastChanged 1.3.6.1.4.1.6527.3.1.2.16.7.3.1.3
tSharedQueueFCLastChanged indicates the value of sysUpTime when the forwarding class to queue mapping entry was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSharedQueueFCQueue 1.3.6.1.4.1.6527.3.1.2.16.7.3.1.4
tSharedQueueFCQueue specifies the logical queue that the traffic classified into this forwarding class should use.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueId 1..8  

tSharedQueueFCMCastQueue 1.3.6.1.4.1.6527.3.1.2.16.7.3.1.5
The value of tSharedQueueFCMCastQueue specifies the logical queue that mutlticast traffic classified into this forwarding class should use.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueId 9..16  

tSharedQueueFCBCastQueue 1.3.6.1.4.1.6527.3.1.2.16.7.3.1.6
The value of tSharedQueueFCBCastQueue specifies the logical queue that broadscast traffic classified into this forwarding class should use.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueId 17..24  

tSharedQueueFCUnknownQueue 1.3.6.1.4.1.6527.3.1.2.16.7.3.1.7
The value of tSharedQueueFCUnknownQueue specifies the logical queue that unknown traffic classified into this forwarding class should use.
Status: current Access: read-create
OBJECT-TYPE    
  TQueueId 25..32  

tSlopePolicyTable 1.3.6.1.4.1.6527.3.1.2.16.10.1
Slope Policy Table. Each entry in this table defines the RED slopes for the high and the low priority traffic.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSlopePolicyEntry

tSlopePolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.10.1.1
Slope Policy Entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSlopePolicyEntry  

tSlopePolicy 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.1
tSlopePolicy maintains the name of the slope policy identifying the policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tSlopeRowStatus 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.2
Row Status of the entry. This allows creation/deletion of rows in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSlopeDescription 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.3
User-provided description of the policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSlopeHiAdminStatus 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.4
tSlopeHiAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeHiAdminStatus is set to 'down', the RED slope is inactive.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER up(1), down(2)  

tSlopeHiStartAverage 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.5
The percentage of the buffer utilized after which the drop probability starts to rise above 0.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tSlopeHiMaxAverage 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.6
The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tSlopeHiMaxProbability 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.7
The drop probability increases steadily from 0 at the tSlopeHiStartAverage upto the tSlopeHiMaxProbability at the tSlopeHiMaxAverage.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tSlopeLoAdminStatus 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.8
tSlopeLoAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeLoAdminStatus is set to 'down', the RED slope is inactive.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER up(1), down(2)  

tSlopeLoStartAverage 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.9
The percentage of the buffer utilized after which the drop probability starts to rise above 0.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tSlopeLoMaxAverage 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.10
The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tSlopeLoMaxProbability 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.11
The drop probability increases steadily from 0 at the tSlopeLoStartAverage upto the tSlopeLoMaxProbability at the tSlopeLoMaxAverage.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tSlopeTimeAvgFactor 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.12
The time average factor describes the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..15  

tSlopeLastChanged 1.3.6.1.4.1.6527.3.1.2.16.10.1.1.13
Timestamp of when this entry was last changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSchedulerPolicyTable 1.3.6.1.4.1.6527.3.1.2.16.12.1
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TSchedulerPolicyEntry

tSchedulerPolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.12.1.1
Information about a particular Scheduler Policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TSchedulerPolicyEntry  

tSchedulerPolicyName 1.3.6.1.4.1.6527.3.1.2.16.12.1.1.1
Name of the scheduler policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tSchedulerPolicyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.12.1.1.2
Row Status of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tSchedulerPolicyDescription 1.3.6.1.4.1.6527.3.1.2.16.12.1.1.3
Description for the scheduler policy
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tSchedulerPolicyLastChanged 1.3.6.1.4.1.6527.3.1.2.16.12.1.1.4
timestamp of last change to this row in tSchedulerPolicyTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSchedulerPolicyFrameBasedAccnt 1.3.6.1.4.1.6527.3.1.2.16.12.1.1.5
The value of tSchedulerPolicyFrameBasedAccnt specifies whether to use frame-based accounting for the schedulers within the scheduler policy and the children queues parented to the scheduling policy. If the value is 'false', the default packet-based accounting method will be used.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tVirtualSchedulerTable 1.3.6.1.4.1.6527.3.1.2.16.12.2
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TVirtualSchedulerEntry

tVirtualSchedulerEntry 1.3.6.1.4.1.6527.3.1.2.16.12.2.1
Information about a particular Scheduler belonging to a Scheduler Policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TVirtualSchedulerEntry  

tVirtualSchedulerTier 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.1
Tier to which this scheduler belongs to.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..3  

tVirtualSchedulerName 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.2
Name of the scheduler policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tVirtualSchedulerRowStatus 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.3
Row Status of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tVirtualSchedulerDescription 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.4
Description for the scheduler policy
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tVirtualSchedulerParent 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.5
The scheduler to which this scheduler would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tVirtualSchedulerLevel 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.6
This specifies the level of priority while feeding to the parent.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tVirtualSchedulerWeight 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.7
The weight that needs to be used by the scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tVirtualSchedulerCIRLevel 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.8
This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tVirtualSchedulerCIRWeight 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.9
The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tVirtualSchedulerPIR 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.10
The rate allowed for this scheduler. A value of -1 implies maximum.
Status: current Access: read-create
OBJECT-TYPE    
  TPIRRate  

tVirtualSchedulerCIR 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.11
The rate allowed for this scheduler. A value of -1 implies maximum.
Status: current Access: read-create
OBJECT-TYPE    
  TCIRRate  

tVirtualSchedulerSummedCIR 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.12
tVirtualSchedulerSummedCIR specifies if the CIR should be used as the summed value of the children. If set to 'true', tVirtualSchedulerCIR loses its meaning.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tVirtualSchedulerLastChanged 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.13
The value of the object tVirtualSchedulerLastChanged indicates the timestamp of last change to this row in tVirtualSchedulerTable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tVirtualSchedulerUsePortParent 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.14
The value of the object tVirtualSchedulerUsePortParent specifies whether this scheduler is parented by a port-level scheduler. When the value is 'true', this virtual scheduler is parented by a port-level scheduler. This object is mutually exclusive with tVirtualSchedulerParent. Only one kind of parent is allowed.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tVirtualSchedulerPortLvl 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.15
The value of the object tVirtualSchedulerPortLvl specifies the port priority this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tVirtualSchedulerPortWght 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.16
The value of the object tVirtualSchedulerPortWght specifies the weight this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tVirtualSchedulerPortCIRLvl 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.17
The value of the object tVirtualSchedulerPortCIRLvl specifies the port priority this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tVirtualSchedulerPortCIRWght 1.3.6.1.4.1.6527.3.1.2.16.12.2.1.18
The value of the object tVirtualSchedulerPortCIRWght specifies the weight this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tPortSchedulerPlcyTable 1.3.6.1.4.1.6527.3.1.2.16.12.3
The tPortSchedulerPlcyTable has an entry for each port scheduler configured on this system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TPortSchedulerPlcyEntry

tPortSchedulerPlcyEntry 1.3.6.1.4.1.6527.3.1.2.16.12.3.1
Each row represents a particular port scheduler. Entries are created and deleted by the user.
Status: current Access: not-accessible
OBJECT-TYPE    
  TPortSchedulerPlcyEntry  

tPortSchedulerPlcyName 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.1
The value of tPortSchedulerPlcyName specifies the name of the port scheduler.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tPortSchedulerPlcyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.2
The value of tPortSchedulerPlcyRowStatus is used for the creation and deletion of port scheduler policies.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tPortSchedulerPlcyDescription 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.3
The value of tPortSchedulerPlcyDescription specifies the description of this port scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tPortSchedulerPlcyLastChanged 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.4
The value of tPortSchedulerPlcyLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tPortSchedulerPlcyMaxRate 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.5
The value of tPortSchedulerPlcyMaxRate specifies the explicit maximum frame based bandwidth limit of this port scheduler.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIR  

tPortSchedulerPlcyLvl1PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.6
The value of tPortSchedulerPlcyLvl1PIR specifies the total bandwidth limit, PIR, for priority level 1.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIR  

tPortSchedulerPlcyLvl1CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.7
The value of tPortSchedulerPlcyLvl1CIR specifies the within-cir bandwidth limit for priority level 1.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyLvl2PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.8
The value of tPortSchedulerPlcyLvl2PIR specifies the total bandwidth limit, PIR, for priority level 2.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIR  

tPortSchedulerPlcyLvl2CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.9
The value of tPortSchedulerPlcyLvl2CIR specifies the within-cir bandwidth limit for priority level 2.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyLvl3PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.10
The value of tPortSchedulerPlcyLvl3PIR specifies the total bandwidth limit, PIR, for priority level 3.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIR  

tPortSchedulerPlcyLvl3CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.11
The value of tPortSchedulerPlcyLvl3CIR specifies the within-cir bandwidth limit for priority level 3.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyLvl4PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.12
The value of tPortSchedulerPlcyLvl4PIR specifies the total bandwidth limit, PIR, for priority level 4.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIR  

tPortSchedulerPlcyLvl4CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.13
The value of tPortSchedulerPlcyLvl4CIR specifies the within-cir bandwidth limit for priority level 4.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyLvl5PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.14
The value of tPortSchedulerPlcyLvl5PIR specifies the total bandwidth limit, PIR, for priority level 5.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIR  

tPortSchedulerPlcyLvl5CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.15
The value of tPortSchedulerPlcyLvl5CIR specifies the within-cir bandwidth limit for priority level 5.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyLvl6PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.16
The value of tPortSchedulerPlcyLvl6PIR specifies the total bandwidth limit, PIR, for priority level 6.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIR  

tPortSchedulerPlcyLvl6CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.17
The value of tPortSchedulerPlcyLvl6CIR specifies the within-cir bandwidth limit for priority level 6.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyLvl7PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.18
The value of tPortSchedulerPlcyLvl7PIR specifies the total bandwidth limit, PIR, for priority level 7.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIR  

tPortSchedulerPlcyLvl7CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.19
The value of tPortSchedulerPlcyLvl7CIR specifies the within-cir bandwidth limit for priority level 7.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyLvl8PIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.20
The value of tPortSchedulerPlcyLvl8PIR specifies the total bandwidth limit, PIR, for priority level 8.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerPIR  

tPortSchedulerPlcyLvl8CIR 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.21
The value of tPortSchedulerPlcyLvl8CIR specifies the within-cir bandwidth limit for priority level 8.
Status: current Access: read-create
OBJECT-TYPE    
  TPortSchedulerCIR  

tPortSchedulerPlcyOrphanLvl 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.22
The value of tPortSchedulerPlcyOrphanLvl specifies the port priority of orphaned queues and schedulers that are above-cir.
Status: current Access: read-create
OBJECT-TYPE    
  TLevel  

tPortSchedulerPlcyOrphanWeight 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.23
The value of tPortSchedulerPlcyOrphanWeight specifies the weight of orphaned queues and schedulers that are above-cir.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tPortSchedulerPlcyOrphanCIRLvl 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.24
The value of tPortSchedulerPlcyOrphanCIRLvl specifies the port priority of orphaned queues and schedulers that are within-cir.
Status: current Access: read-create
OBJECT-TYPE    
  TLevelOrDefault  

tPortSchedulerPlcyOrphanCIRWght 1.3.6.1.4.1.6527.3.1.2.16.12.3.1.25
The value of tPortSchedulerPlcyOrphanCIRWght specifies the weight of orphaned queues and schedulers that are within-cir.
Status: current Access: read-create
OBJECT-TYPE    
  TWeight  

tQosDomainLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.1
The value of the object tQosDomainLastChanged indicates the timestamp of last change to the QoS Domain.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tDSCPNameTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.5
The value of the object tDSCPNameTableLastChanged indicates the timestamp of last change to the DSCP Name Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tFCNameTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.10
The value of the object tFCNameTableLastChanged indicates the timestamp of last change to the FC Name Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.20
The value of the object tSapIngressTableLastChanged indicates the timestamp of last change to the Sap Ingress Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressQueueTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.21
tSapIngressQueueTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Queue Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressDSCPTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.22
tSapIngressDSCPTableLastChanged maintains the timestamp of the last change made to the Sap Ingress DSCP Mapping Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressDot1pTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.23
tSapIngressDot1pTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Dot1p Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressIPCriteriaTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.24
tSapIngressIPCriteriaTableLastChanged maintains the timestamp of the last change made to the Sap Ingress IP Criteria Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressMacCriteriaTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.25
tSapIngressMacCriteriaTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Mac Criteria Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressFCTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.26
tSapIngressFCTableLastChanged maintains the timestamp of the last change made to the Sap Ingress FC Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressPrecTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.27
tSapIngressPrecTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Precedence Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.30
tSapEgressTableLastChanged maintains the timestamp of the last change made to the Sap Egress Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressQueueTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.31
tSapEgressQueueTableLastChanged maintains the timestamp of the last change made to the Sap Egress Queue Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapEgressFCTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.32
tSapEgressFCTableLastChanged maintains the timestamp of the last change made to the Sap Egress FC Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkPolicyTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.40
tNetworkPolicyTableLastChanged maintains the timestamp of the last change made to the Network Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkIngressDSCPTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.41
tNetworkIngressDSCPTableLastChanged maintains the timestamp of the last change made to the Network Ingress DSCP Mapping Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkIngressLSPEXPTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.42
tNetworkIngressLSPEXPTableLastChanged maintains the timestamp of the last change made to the Network Ingress LSPEXP Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkEgressFCTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.43
tNetworkEgressFCTableLastChanged maintains the timestamp of the last change made to the Network Egress FC Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkIngressDot1pTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.44
tNetworkIngressDot1pTableLastChanged maintains the timestamp of the last change made to the Network Ingress Dot1p Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkQueuePolicyTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.50
tNetworkQueuePolicyTableLastChanged maintains the timestamp of the last change made to the Network Queue Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkQueueTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.51
tNetworkQueueTableLastChanged maintains the timestamp of the last change made to the Network Queue Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNetworkQueueFCTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.52
tNetworkQueueFCTableLastChanged maintains the timestamp of the last change made to the Network Queue FC Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSlopePolicyTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.55
tSlopePolicyTableLastChanged maintains the timestamp of the last change made to the Slope Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSchedulerPolicyTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.60
tSchedulerPolicyTableLastChanged maintains the timestamp of the last change made to the Scheduler Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tVirtualSchedulerTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.61
tVirtualSchedulerTableLastChanged maintains the timestamp of the last change made to the Virtual Scheduler Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tAtmTdpTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.62
tAtmTdpTableLastChanged maintains the timestamp of the last change made to the Traffic Descriptor Profile Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSharedQueuePolicyTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.63
tSharedQueuePolicyTableLastChanged maintains the timestamp of the last change made to the Queue Policy Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSharedQueueTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.64
tSharedQueueTableLastChanged maintains the timestamp of the last change made to the Queue Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSharedQueueFCTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.65
tSharedQueueFCTableLastChanged maintains the timestamp of the last change made to the Queue FC Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tSapIngressIPv6CriteriaTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.66
The value of the object tSapIngressIPv6CriteriaTableLastChanged indicates the timestamp of the last change made to the Sap Ingress IPv6 Criteria Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNamedPoolPolicyTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.73
The value of tNamedPoolPolicyTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tNamedPoolPolicyTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQ1NamedPoolTableLastChanged 1.3.6.1.4.1.6527.3.1.2.16.20.74
The value of tQ1NamedPoolTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tQ1NamedPoolTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tAtmTdpTable 1.3.6.1.4.1.6527.3.1.2.16.21.1
This table contains information on ATM traffic descriptors for controlling ATM traffic management capabilities.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TAtmTdpEntry

tAtmTdpEntry 1.3.6.1.4.1.6527.3.1.2.16.21.1.1
This list contains ATM traffic descriptor objects and the associated parameters. All objects that do not apply to a given service category are given default values of zero.
Status: current Access: not-accessible
OBJECT-TYPE    
  TAtmTdpEntry  

tAtmTdpIndex 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.1
This object is used to identify an entity inside the tAtmTdpTable. When creating a new row in the table the value of this index may be obtained by retrieving the value of tAtmTdpIndexNext.
Status: current Access: not-accessible
OBJECT-TYPE    
  AtmTrafficDescrParamIndex 1..1000  

tAtmTdpSir 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.2
tAtmTdpSir identifies the sustained information rate in kilobits per second. The default Sir is determined by the Service Category. The following default applies to Sir that is modifiable depending upon a given service category: Applicable Service Category Default Sir Value RT-VBR 0 NRT-VBR 0 Note that for the service categories given above, the value of Sir must be less than or equal to the value of Pir.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tAtmTdpPir 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.3
tAtmTdpPir identifies the peak information rate in kilobits per second. The default Pir is determined by the Service Category. The following default applies to Pir that is modifiable depending upon a given service category: Applicable Service Category Default Pir Value UBR (with/without Mir) 4294967295 CBR 0 RT-VBR 0 NRT-VBR 0
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tAtmTdpMbs 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.4
tAtmTdpMbs identifies the maximum burst size in cells. The default Mbs is determined by the Service Category. The following default applies to Mbs that is modifiable depending upon a given service category: Applicable Service Category Default Mbs Value RT-VBR 32 NRT-VBR 32
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tAtmTdpMir 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.5
tAtmTdpMir identifies the Minimum Information Rate in kilobits per second. The default Mir is determined by the Service Category. The following default applies for Mir that is modifiable depending upon a given service category: Applicable Service Category Default Mir Value UBR (with/without Mir) 0 Note that for the service categories given above, the value of Mir must be less than or equal to the value of Pir.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tAtmTdpShaping 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.6
tAtmTdpShaping determines whether egress shaping should occur. The default tAtmTdpShaping is determined by the Service Category. The following default applies for tAtmTdpShaping depending upon a given service category: Applicable Service Category Default Shaping Value UBR disabled CBR enabled RT-VBR enabled NRT-VBR enabled For a Service Category of UBR, tAtmTdpShaping cannot be enabled. For CBR and RT-VBR service cateories disabling shaping is MDA-dependent. Shaping is only applied in the egress direction.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

tAtmTdpServCat 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.7
tAtmTdpServCat determines the ATM service category.
Status: current Access: read-create
OBJECT-TYPE    
  AtmServiceCategory  

tAtmTdpDescription 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.8
The value of tAtmTdpDescription specifies an ASCII string used to describe the ATM traffic descriptor.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tAtmTdpLastChanged 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.9
tAtmTdpLastChanged maintains the timestamp of the last change made to a row in the Traffic Descriptor Profile Table.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tAtmTdpRowStatus 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.10
tAtmTdpRowStatus is used to create/modify/delete a new row in this table. Only createAndGo/Active/Destroy are supported
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tAtmTdpDescrType 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.11
tAtmTdpDescrType identifies the types of ATM traffic descriptor. The default is determined by the value of tAtmTdpServCat. The following default rules apply: Applicable Service Category tAtmTdpDescrType UBR clp0And1pcr CBR clp0And1pcr RT-VBR clp0And1pcrPlusClp0And1scr NRT-VBR clp0And1pcrPlusClp0And1scr
Status: current Access: read-create
OBJECT-TYPE    
  TAtmTdpDescrType  

tAtmTdpCdvt 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.12
tAtmTdpCdvt identifies the Cell Delay Variation Tolerance in microseconds. The following default applies for Cdvt that is modifiable depending upon a given service category: Applicable Service Category Default Cdvt Value CBR/RT-VBR/NRT-VBR/UBR 250
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tAtmTdpPolicing 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.13
tAtmTdpPolicing determines whether ingress traffic is policed. Policing by default is disabled. Policing is valid for CBR, UBR RT-VBR and NRT-VBR. This is cell-based policing. tAtmTdpDescrType Policing Scheme Applicable Serv Cat clp0And1pcr CBR.1 CBR and UBR clp0And1pcrPlusClp0And1scr VBR.1 RT/NRT-VBR clp0And1pcrPlusClp0scr VBR.2 RT/NRT-VBR clp0And1pcrPlusClp0scrTag VBR.3 RT/NRT-VBR
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

tAtmTdpCLPTagging 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.14
tAtmTdpCLPTagging controls the setting of the CLP bit in the ATM cell header for egress traffic on an IES or VPRN SAP. If disabled (the default), all traffic has the CLP bit set to zero. If enabled, traffic queued on expedited queues has the CLP bit set to zero, while traffic on non-expedited queues has the CLP bit set to one.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

tNamedPoolPolicyTable 1.3.6.1.4.1.6527.3.1.2.16.22.1
This table contains information on Named buffer pools policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNamedPoolPolicyEntry

tNamedPoolPolicyEntry 1.3.6.1.4.1.6527.3.1.2.16.22.1.1
This list contains Named buffer pools policy related information.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedPoolPolicyEntry  

tNamedPoolPolicyName 1.3.6.1.4.1.6527.3.1.2.16.22.1.1.1
The value of tNamedPoolPolicyName indicates the name of Named pool policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tNamedPoolPolicyRowStatus 1.3.6.1.4.1.6527.3.1.2.16.22.1.1.2
The value of tNamedPoolPolicyRowStatus is used for creation or deletion of named pool policies.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tNamedPoolPolicyLastChanged 1.3.6.1.4.1.6527.3.1.2.16.22.1.1.3
The value of tNamedPoolPolicyLastChanged indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tNamedPoolPolicyDescription 1.3.6.1.4.1.6527.3.1.2.16.22.1.1.4
The value of tNamedPoolPolicyDescription specifies the description for a specific named pool policy.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tNamedPoolPolicyQ1DefaultWeight 1.3.6.1.4.1.6527.3.1.2.16.22.1.1.5
The value of tNamedPoolPolicyQ1DefaultWeight specifies the port allocation weight given to the default pools.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tNamedPoolPolicyQ1MdaWeight 1.3.6.1.4.1.6527.3.1.2.16.22.1.1.6
The value of tNamedPoolPolicyQ1MdaWeight specifies the port allocation weight given to the MDA named pools.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tNamedPoolPolicyQ1PortWeight 1.3.6.1.4.1.6527.3.1.2.16.22.1.1.7
The value of tNamedPoolPolicyQ1PortWeight specifies the port allocation weight given to the local port named pools.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tQ1NamedPoolTable 1.3.6.1.4.1.6527.3.1.2.16.22.2
This table contains information on Q1 pools policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TQ1NamedPoolEntry

tQ1NamedPoolEntry 1.3.6.1.4.1.6527.3.1.2.16.22.2.1
This list contains Q1 pools policy related information.
Status: current Access: not-accessible
OBJECT-TYPE    
  TQ1NamedPoolEntry  

tQ1NamedPoolPolicyName 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.1
The value of tQ1NamedPoolPolicyName indicates the name of the existing Q1 named pool policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tQ1NamedPoolName 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.2
The value of tQ1NamedPoolName indicates the name of the existing pool within the policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tQ1NamedPoolRowStatus 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.3
The value of tQ1NamedPoolRowStatus is used for creation or deletion of Q1 named pools.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tQ1NamedPoolLastChanged 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.4
The value of tQ1NamedPoolLastChanged indicates the sysUpTime when this row was last modified.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tQ1NamedPoolDescription 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.5
The value of tQ1NamedPoolDescription specifies the description for a specific Q1 named pool.
Status: current Access: read-create
OBJECT-TYPE    
  TItemDescription  

tQ1NamedPoolNetworkAllocWeight 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.6
The value of tQ1NamedPoolNetworkAllocWeight specifies the weight used to divide network associated buffer space between named pools.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tQ1NamedPoolAccessAllocWeight 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.7
The value of tQ1NamedPoolAccessAllocWeight specifies the weight used to divide access associated buffer space between named pools.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100  

tQ1NamedPoolSlopePolicy 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.8
The value of tQ1NamedPoolSlopePolicy specifies the name of the slop-policy which is used to override the default slope-policy for the named buffer pool.
Status: current Access: read-create
OBJECT-TYPE    
  TNamedItemOrEmpty  

tQ1NamedPoolReservedCbs 1.3.6.1.4.1.6527.3.1.2.16.22.2.1.9
The value of tQ1NamedPoolReservedCbs specifies the reserved CBS size of the pool. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

tAtmTdpIndexNext 1.3.6.1.4.1.6527.3.1.2.16.21.2
This object contains an appropriate value to be used for tAtmTdpIndex when creating entries in the tAtmTdpTable. The value 0 indicates that no unassigned entries are available. To obtain the tAtmTdpIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1000  

tAtmTdpsMaxSupported 1.3.6.1.4.1.6527.3.1.2.16.21.3
This object contains the maximum number of ATM Traffic Descriptor Profiles that can be configured on this system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tAtmTdpsCurrentlyConfigured 1.3.6.1.4.1.6527.3.1.2.16.21.4
This object contains the number of currently configured ATM Traffic Descriptor Profiles on this system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tmnxQosCompliances 1.3.6.1.4.1.6527.3.1.1.16.1
OBJECT IDENTIFIER    

tmnxQosGroups 1.3.6.1.4.1.6527.3.1.1.16.2
OBJECT IDENTIFIER    

tmnxQos7450V4v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.4
The compliance statement for management of QOS features on Alcatel 7450 ESS series systems release R4.0.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxQos7750V4v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.5
The compliance statement for management of QOS features on Alcatel 7750 SR series systems release R4.0.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxQos7450V5v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.6
The compliance statement for management of QOS features on Alcatel 7450 ESS series systems release R5.0.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxQos7750V5v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.7
The compliance statement for management of QOS features on Alcatel 7750 SR series systems release R5.0.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxQos7450V6v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.8
The compliance statement for management of QOS features on Alcatel 7450 ESS series systems release R6.0.
Status: current Access: read-only
MODULE-COMPLIANCE    

tmnxQos7750V6v0Compliance 1.3.6.1.4.1.6527.3.1.1.16.1.9
The compliance statement for management of QOS features on Alcatel 7750 SR series systems release R6.0.
Status: current Access: read-only
MODULE-COMPLIANCE    

tmnxQosGlobalGroup 1.3.6.1.4.1.6527.3.1.1.16.2.1
The group of objects supporting general management of QOS features on Alcatel 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxQosDSCPGroup 1.3.6.1.4.1.6527.3.1.1.16.2.2
The group of objects supporting management of Differential Services Code Points on Alcatel 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxQosFCGroup 1.3.6.1.4.1.6527.3.1.1.16.2.3
The group of objects supporting management of Forwarding Classes on Alcatel 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxQosSlopeGroup 1.3.6.1.4.1.6527.3.1.1.16.2.7
The group of objects supporting management of Slope policies on Alcatel 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxQosSchedulerGroup 1.3.6.1.4.1.6527.3.1.1.16.2.8
The group of objects supporting management of Scheduler policies on Alcatel 7x50 SR series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tQosObsoleteObjectsGroup 1.3.6.1.4.1.6527.3.1.1.16.2.10
The group of obsolete objects in the ALCATEL-IND1-TIMETRA-QOS-MIB.
Status: current Access: read-only
OBJECT-GROUP    

tmnxQosSapEgressR2r1Group 1.3.6.1.4.1.6527.3.1.1.16.2.12
The group of objects supporting management of SAP egress QoS policies on Alcatel 7x50 SR series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxQosNetworkR2r1Group 1.3.6.1.4.1.6527.3.1.1.16.2.13
The group of objects supporting management of Network QoS policies on Alcatel 7x50 SR series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxQosAtmTdpV3v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.15
The group of objects for ATM Traffic Descriptor Profiles on Alcatel 7x50 SR series systems release 3.0.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxQosSapIpv6FilterR4r0Group 1.3.6.1.4.1.6527.3.1.1.16.2.16
The group of objects for Qos Policies related to IPv6 on Alcatel 7x50 SR series systems release 4.0.
Status: current Access: read-only
OBJECT-GROUP    

tmnxQosQueueV4v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.18
The group of objects supporting management of QoS queue policies on Alcatel 7x50 SR series systems release 4.0.
Status: current Access: read-only
OBJECT-GROUP    

tmnxQosSapIngressV4v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.19
The group of objects supporting management of SAP ingress QoS policies on Alcatel 7x50 SR series systems release 4.0.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxQosSchedulerV5v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.20
The group of objects supporting management of Scheduler policies on Alcatel 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxQosSapEgressV5v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.21
The group of objects supporting management of SAP egress QoS policies on Alcatel 7x50 SR series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxQosNetworkV5v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.22
The group of objects supporting management of Network QoS policies on Alcatel 7x50 SR series systems.
Status: obsolete Access: read-only
OBJECT-GROUP    

tmnxQosAtmTdpV5v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.24
The group of objects for ATM Traffic Descriptor Profiles on Alcatel 7x50 SR series systems release 5.0.
Status: current Access: read-only
OBJECT-GROUP    

tmnxQosSapIngressV6v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.25
The group of objects supporting management of SAP ingress QoS policies on Alcatel 7x50 SR series systems release 6.0.
Status: current Access: read-only
OBJECT-GROUP    

tmnxQosSapEgressV6v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.26
The group of objects supporting management of SAP egress QoS policies on Alcatel 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxQosNetworkV6v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.27
The group of objects supporting management of Network QoS policies on Alcatel 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxQosFrameBasedV6v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.28
The group of objects supporting management of frame-based queue accounting on Alcatel 7x50 SR series systems release 6.0.
Status: current Access: read-only
OBJECT-GROUP    

tmnxQosObsoletedV6v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.29
The group of obsolete objects for the QoS on Alcatel 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxQosNamedPoolPolicyV6v0Group 1.3.6.1.4.1.6527.3.1.1.16.2.30
The group of objects for the named pool policy on Alcatel 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP