ALTEON-CHEETAH-SWITCH-MIB

File: ALTEON-CHEETAH-SWITCH-MIB.mib (443649 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC ALTEON-ROOT-MIB
RFC1213-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter32 Gauge32 Counter64
IpAddress TimeTicks DisplayString
PhysAddress aws-switch ipAddrEntry

Defined Types

FeatureStatus  
INTEGER enable(1), disable(2)    

SwitchCapSlbPortInfoTableEntry  
SEQUENCE    
  switchCapSlbPortInfoIndx Integer32
  switchCapSlbPortClientState INTEGER
  switchCapSlbPortSerState INTEGER
  switchCapSlbPortFltState DisplayString
  switchCapSlbPortRTSState INTEGER

AgLicenseInfoTableEntry  
SEQUENCE    
  licenseInfoIdx Integer32
  softwareKey DisplayString
  licenseType INTEGER
  remainingDays INTEGER
  remainingDaysLeft DisplayString
  licenseSize Integer32
  licenseAllocated Integer32

AgLicenseCapacityInfoTableEntry  
SEQUENCE    
  licenseCapacityInfoIdx Integer32
  licenseCapacitySize Integer32
  licenseCapacityAllocated Integer32

AgSecIpAclOperListSrcTableEntry  
SEQUENCE    
  agSecIpAclOperListSrcIndx Integer32
  agSecIpAclOperListSrcAddr IpAddress
  agSecIpAclOperListSrcMask IpAddress
  agSecIpAclOperListSrcTimeOut Integer32

AgSecIpAclOperDstTableEntry  
SEQUENCE    
  agSecIpAclOperDstIndx Integer32
  agSecIpAclOperDstAddr IpAddress
  agSecIpAclOperDstMask IpAddress
  agSecIpAclOperDstTimeout Integer32

AgPortOperTableEntry  
SEQUENCE    
  portOperIdx Integer32
  portOperRmon INTEGER
  portOperState INTEGER

PortInfoTableEntry  
SEQUENCE    
  portInfoIndx Integer32
  portInfoSpeed INTEGER
  portInfoMode INTEGER
  portInfoFlowCtrl INTEGER
  portInfoLink INTEGER
  portInfoPhyIfDescr DisplayString
  portInfoPhyIfType INTEGER
  portInfoPhyIfMtu Integer32
  portInfoPhyIfPhysAddress PhysAddress
  portInfoPhyIfOperStatus INTEGER
  portInfoPhyIfLastChange TimeTicks
  portInfoPhyConnType INTEGER
  portInfoPreferred INTEGER
  portInfoBackup INTEGER
  portInfoSFPName DisplayString
  portInfoSFPType INTEGER
  portInfoShared INTEGER
  portInfoVADC INTEGER

AgCurCfgHcTcpPortTableEntry  
SEQUENCE    
  agCurCfgHcTcpPortIndx Integer32
  agCurCfgHcTcpPortNum INTEGER

AgNewCfgHcTcpPortTableEntry  
SEQUENCE    
  agNewCfgHcTcpPortIndx Integer32
  agNewCfgHcTcpPortNum INTEGER
  agNewCfgHcTcpPortNumDelete INTEGER

AgImageAdcEntry  
SEQUENCE    
  agImageAdcIndex INTEGER
  agImageAdcVersion DisplayString
  agImageAdcDownloadTime DisplayString
  agImageAdcAssignedVadcs OCTET STRING
  agImageAdcStatus INTEGER
  agImageAdcAdd INTEGER
  agImageAdcRemove INTEGER
  agImageAdcBmap OCTET STRING
  agImageAdcDefault INTEGER

AgImageVxEntry  
SEQUENCE    
  agImageVxIndex INTEGER
  agImageVxVersion DisplayString
  agImageVxDownloadTime DisplayString
  agImageVxStatus INTEGER

AgSysPeerCurCfgEntry  
SEQUENCE    
  agSysPeerCurCfgIndex Integer32
  agSysPeerCurCfgAddr IpAddress
  agSysPeerCurCfgState INTEGER
  agSysPeerCurCfgVadcBmap OCTET STRING
  agSysPeerCurCfgAddrType INTEGER
  agSysPeerCurCfgIpv6Addr DisplayString

AgSysPeerNewCfgEntry  
SEQUENCE    
  agSysPeerNewCfgIndex Integer32
  agSysPeerNewCfgAddr IpAddress
  agSysPeerNewCfgState INTEGER
  agSysPeerNewCfgVadcBmap OCTET STRING
  agSysPeerNewCfgDelete INTEGER
  agSysPeerNewCfgVadcAdd INTEGER
  agSysPeerNewCfgVadcRemove INTEGER
  agSysPeerNewCfgAddrType INTEGER
  agSysPeerNewCfgIpv6Addr DisplayString

AgSyslogMsgTableEntry  
SEQUENCE    
  agSyslogMsgIndex Integer32
  agSyslogMessage DisplayString

AgSyslogSavedMsgTableEntry  
SEQUENCE    
  agSyslogMsgSavedIndex Integer32
  agSyslogSavedMessage DisplayString

AgCurCfgTrapHostEntry  
SEQUENCE    
  agCurCfgTrapHostIndx Integer32
  agCurCfgTrapHostIpAddr IpAddress
  agCurCfgTrapHostCommString DisplayString

AgNewCfgTrapHostEntry  
SEQUENCE    
  agNewCfgTrapHostIndx Integer32
  agNewCfgTrapHostIpAddr IpAddress
  agNewCfgTrapHostCommString DisplayString

AgPortCurCfgTableEntry  
SEQUENCE    
  agPortCurCfgIndx Integer32
  agPortCurCfgState INTEGER
  agPortCurCfgVlanTag INTEGER
  agPortCurCfgRmon INTEGER
  agPortCurCfgPVID Integer32
  agPortCurCfgFastEthAutoNeg INTEGER
  agPortCurCfgFastEthSpeed INTEGER
  agPortCurCfgFastEthMode INTEGER
  agPortCurCfgFastEthFctl INTEGER
  agPortCurCfgGigEthAutoNeg INTEGER
  agPortCurCfgGigEthFctl INTEGER
  agPortCurCfgBwmContract Integer32
  agPortCurCfgDiscardNonIPs INTEGER
  agPortCurCfgLinkTrap INTEGER
  agPortCurCfgPreferred INTEGER
  agPortCurCfgBackup INTEGER
  agPortCurCfgEgressBW DisplayString
  agPortCurCfgNonIPBwmContract Integer32
  agPortCurCfgGigEthSpeed INTEGER
  agPortCurCfgGigEthMode INTEGER
  agPortCurCfgPortAlias DisplayString
  agPortCurCfgPortName DisplayString
  agPortCurCfgPortStp INTEGER
  agPortCurCfgPortIpFwd INTEGER

AgPortNewCfgTableEntry  
SEQUENCE    
  agPortNewCfgIndx Integer32
  agPortNewCfgState INTEGER
  agPortNewCfgVlanTag INTEGER
  agPortNewCfgRmon INTEGER
  agPortNewCfgPVID Integer32
  agPortNewCfgFastEthAutoNeg INTEGER
  agPortNewCfgFastEthSpeed INTEGER
  agPortNewCfgFastEthMode INTEGER
  agPortNewCfgFastEthFctl INTEGER
  agPortNewCfgGigEthAutoNeg INTEGER
  agPortNewCfgGigEthFctl INTEGER
  agPortNewCfgPortName DisplayString
  agPortNewCfgBwmContract Integer32
  agPortNewCfgDiscardNonIPs INTEGER
  agPortNewCfgLinkTrap INTEGER
  agPortNewCfgPreferred INTEGER
  agPortNewCfgBackup INTEGER
  agPortNewCfgEgressBW DisplayString
  agPortNewCfgNonIPBwmContract Integer32
  agPortNewCfgGigEthSpeed INTEGER
  agPortNewCfgGigEthMode INTEGER
  agPortNewCfgPortAlias DisplayString
  agPortNewCfgPortName DisplayString
  agPortNewCfgPortStp INTEGER
  agPortNewCfgPortIpFwd INTEGER

AgApplyTableEntry  
SEQUENCE    
  agApplyIndex Integer32
  agApplyString OCTET STRING

AgCurCfgMgmtNetEntry  
SEQUENCE    
  agCurCfgMgmtNetIndex Integer32
  agCurCfgMgmtNetSubnet IpAddress
  agCurCfgMgmtNetMask IpAddress
  agCurCfgMgmtNetProtocol INTEGER

AgCurCfgMgmtNet6Entry  
SEQUENCE    
  agCurCfgMgmtNet6Index Integer32
  agCurCfgMgmtNet6Subnet DisplayString
  agCurCfgMgmtNet6Prefix INTEGER
  agCurCfgMgmtNet6Protocol INTEGER

AgNewCfgMgmtNetEntry  
SEQUENCE    
  agNewCfgMgmtNetIndex Integer32
  agNewCfgMgmtNetSubnet IpAddress
  agNewCfgMgmtNetMask IpAddress
  agNewCfgMgmtNetDelete INTEGER
  agNewCfgMgmtNetProtocol INTEGER

AgNewCfgMgmtNet6Entry  
SEQUENCE    
  agNewCfgMgmtNet6Index Integer32
  agNewCfgMgmtNet6Subnet DisplayString
  agNewCfgMgmtNet6Prefix INTEGER
  agNewCfgMgmtNet6Protocol INTEGER
  agNewCfgMgmtNet6Delete INTEGER

AgCurCfgPgrpMatchEntry  
SEQUENCE    
  agCurCfgPgrpMatchIndex Integer32
  agCurCfgPgrpName DisplayString
  agCurCfgPgrpMatchBmap OCTET STRING

AgNewCfgPgrpMatchEntry  
SEQUENCE    
  agNewCfgPgrpMatchIndex Integer32
  agNewCfgPgrpName DisplayString
  agNewCfgPgrpMatchAdd Integer32
  agNewCfgPgrpMatchRem Integer32
  agNewCfgPgrpMatchBmap OCTET STRING
  agNewCfgPgrpDelete INTEGER

AgCfgSecurityPortTableEntry  
SEQUENCE    
  agCfgSecurityPortIndx Integer32
  agCurCfgSecurityDosState INTEGER
  agNewCfgSecurityDosState INTEGER
  agCurCfgSecurityIpAclState INTEGER
  agNewCfgSecurityIpAclState INTEGER
  agCurCfgSecurityUbState INTEGER
  agNewCfgSecurityUbState INTEGER
  agCurCfgSecurityBogonState INTEGER
  agCurCfgSecurityAttacksBmap OCTET STRING
  agNewCfgSecurityAttacksBmap OCTET STRING
  agNewCfgSecurityAddAttack INTEGER
  agNewCfgSecurityRemAttack INTEGER
  agNewCfgSecurityDoSAttacks INTEGER
  agNewCfgSecurityBogonState INTEGER

IpAclCurCfgEntry  
SEQUENCE    
  ipAclCurCfgIndx Integer32
  ipAclCurCfgIp IpAddress
  ipAclCurCfgMask IpAddress

IpAclNewCfgEntry  
SEQUENCE    
  ipAclNewCfgIndx Integer32
  ipAclNewCfgIp IpAddress
  ipAclNewCfgAction INTEGER
  ipAclNewCfgMask IpAddress

UdpBlastCurCfgudpPortEntry  
SEQUENCE    
  udpBlastCurCfgudpPortLowIndx INTEGER
  udpBlastCurCfgudpPortHighIndx INTEGER
  udpBlastCurCfgudpPortEntryPacketLimit INTEGER

UdpBlastNewCfgudpPortEntry  
SEQUENCE    
  udpBlastNewCfgudpPortLowIndx INTEGER
  udpBlastNewCfgudpPortHighIndx INTEGER
  udpBlastNewCfgudpPortEntryDelete INTEGER
  udpBlastNewCfgudpPortEntryPacketLimit INTEGER

IpDstAclCurCfgEntry  
SEQUENCE    
  ipDstAclCurCfgIndx Integer32
  ipDstAclCurCfgIp IpAddress
  ipDstAclCurCfgMask IpAddress

IpDstAclNewCfgEntry  
SEQUENCE    
  ipDstAclNewCfgIndx Integer32
  ipDstAclNewCfgIp IpAddress
  ipDstAclNewCfgAction INTEGER
  ipDstAclNewCfgMask IpAddress

AgDosPortStatsTableEntry  
SEQUENCE    
  agDosPortStatsIndx Integer32
  agDosPortStatsIPLen Counter32
  agDosPortStatsIPVersion Counter32
  agDosPortStatsBroadcast Counter32
  agDosPortStatsLoopback Counter32
  agDosPortStatsLand Counter32
  agDosPortStatsIPReserved Counter32
  agDosPortStatsIPTTL Counter32
  agDosPortStatsIPProt Counter32
  agDosPortStatsIPOptLen Counter32
  agDosPortStatsFragMoreDont Counter32
  agDosPortStatsFragData Counter32
  agDosPortStatsFragBoundary Counter32
  agDosPortStatsFragLast Counter32
  agDosPortStatsFragDontOff Counter32
  agDosPortStatsFragOpt Counter32
  agDosPortStatsFragOff Counter32
  agDosPortStatsFragOversize Counter32
  agDosPortStatsTCPLen Counter32
  agDosPortStatsTCPPortZero Counter32
  agDosPortStatsBlatAttack Counter32
  agDosPortStatsTCPReserved Counter32
  agDosPortStatsNullScanAttack Counter32
  agDosPortStatsFullXmasScan Counter32
  agDosPortStatsFinScan Counter32
  agDosPortStatsVecnaScan Counter32
  agDosPortStatsXmasScanAttack Counter32
  agDosPortStatsSynFinScan Counter32
  agDosPortStatsFlagAbnormal Counter32
  agDosPortStatsSYNData Counter32
  agDosPortStatsSYNFrag Counter32
  agDosPortStatsFTPPort Counter32
  agDosPortStatsDNSPort Counter32
  agDosPortStatsSeqZero Counter32
  agDosPortStatsAckZero Counter32
  agDosPortStatsTCPOptLen Counter32
  agDosPortStatsUDPLen Counter32
  agDosPortStatsUDPPortZero Counter32
  agDosPortStatsFraggleAttack Counter32
  agDosPortStatsPepsi Counter32
  agDosPortStatsRc8 Counter32
  agDosPortStatsSNMPNull Counter32
  agDosPortStatsICMPLen Counter32
  agDosPortStatsSmurfAttack Counter32
  agDosPortStatsICMPData Counter32
  agDosPortStatsICMPOff Counter32
  agDosPortStatsICMPType Counter32
  agDosPortStatsIGMPLen Counter32
  agDosPortStatsIGMPFrag Counter32
  agDosPortStatsIGMPType Counter32
  agDosPortStatsARPLen Counter32
  agDosPortStatsARPNbCast Counter32
  agDosPortStatsARPNuCast Counter32
  agDosPortStatsARPSpoof Counter32
  agDosPortStatsGARP Counter32
  agDosPortStatsIP6Len Counter32
  agDosPortStatsIP6Version Counter32

AgSecurityPgrpStatsTableEntry  
SEQUENCE    
  agSecurityPgrpStatsIndx Integer32
  agSecurityPgrpStatsName DisplayString
  agSecurityPgrpStatsHits Counter32

AgSecurityUbStatsTableEntry  
SEQUENCE    
  agSecurityUbStatsIndx Integer32
  agSecurityUbStatsPort Integer32
  agSecurityUbStatsBlockedPacket Counter32
  agSecurityUbStatsPacketRate Counter32

AgSecurityIpAclStatsTableEntry  
SEQUENCE    
  agSecurityIpAclStatsIndx Integer32
  agSecurityIpAclStatsAddress IpAddress
  agSecurityIpAclStatsBlockedPacket Counter32

AgSecurityIpDstAclStatsTableEntry  
SEQUENCE    
  agSecurityIpDstAclStatsIndx Integer32
  agSecurityIpDstAclStatsAddress IpAddress
  agSecurityIpDstAclStatsBlockedPacket Counter32

AgCurCfgPortAccessEntry  
SEQUENCE    
  agCurCfgPortAccessIndex Integer32
  agCurCfgPortAccessState INTEGER

AgNewCfgPortAccessEntry  
SEQUENCE    
  agNewCfgPortAccessIndex Integer32
  agNewCfgPortAccessState INTEGER

AgCurCfgVLANAccessEntry  
SEQUENCE    
  agCurCfgVLANAccessIndex Integer32
  agCurCfgVLANAccessState INTEGER

AgNewCfgVLANAccessEntry  
SEQUENCE    
  agNewCfgVLANAccessIndex Integer32
  agNewCfgVLANAccessState INTEGER

AgSaveTableEntry  
SEQUENCE    
  agSaveIndex Integer32
  agSaveString OCTET STRING

AgFileTableEntry  
SEQUENCE    
  agFileIndex Integer32
  agFileString OCTET STRING

AgFileErrorTableEntry  
SEQUENCE    
  agFileErrorIndex Integer32
  agFileErrorString DisplayString

AgAccessUserCurCfgTableEntry  
SEQUENCE    
  agAccessUserCurCfgUId Integer32
  agAccessUserCurCos INTEGER
  agAccessUserCurCfgName DisplayString
  agAccessUserCurCfgAdminPswd DisplayString
  agAccessUserCurCfgPswd DisplayString
  agAccessUserCurCfgConfPswd DisplayString
  agAccessUserCurCfgBackDoor INTEGER
  agAccessUserCurCfgCrtMng INTEGER
  agAccessUserCurCfgReal DisplayString
  agAccessUserCurCfgState INTEGER
  agAccessUserCurCfgBmap OCTET STRING

AgAccessUserNewCfgTableEntry  
SEQUENCE    
  agAccessUserNewCfgUId Integer32
  agAccessUserNewCos INTEGER
  agAccessUserNewCfgName DisplayString
  agAccessUserNewCfgAdminPswd DisplayString
  agAccessUserNewCfgPswd DisplayString
  agAccessUserNewCfgConfPswd DisplayString
  agAccessUserNewCfgBackDoor INTEGER
  agAccessUserNewCfgCrtMng INTEGER
  agAccessUserNewCfgRealAdd Integer32
  agAccessUserNewCfgRealRem Integer32
  agAccessUserNewCfgState INTEGER
  agAccessUserNewCfgDelete INTEGER
  agAccessUserNewCfgBmap OCTET STRING

AgAccessHttpsCfgCertsEntry  
SEQUENCE    
  agAccessHttpsCfgCertsID INTEGER
  agAccessHttpsCfgCertsName DisplayString
  agAccessHttpsCfgCertsKeySize INTEGER
  agAccessHttpsCfgCertsExpiry DisplayString
  agAccessHttpsCfgCertsCommonName DisplayString
  agAccessHttpsCfgCertsHashAlgo INTEGER
  agAccessHttpsCfgCertsCountryName DisplayString
  agAccessHttpsCfgCertsProvinceName DisplayString
  agAccessHttpsCfgCertsLocalityName DisplayString
  agAccessHttpsCfgCertsOrganizationName DisplayString
  agAccessHttpsCfgCertsOrganizationUnitName DisplayString
  agAccessHttpsCfgCertsEMail DisplayString
  agAccessHttpsCfgCertsValidityPeriod INTEGER
  agAccessHttpsCfgCertsDelete INTEGER
  agAccessHttpsCfgCertsGenerate INTEGER
  agAccessHttpsCfgCertsStatus INTEGER

TargetAddrCurCfgEntry  
SEQUENCE    
  targetAddrCurCfgIndex Integer32
  targetAddrCurCfgName DisplayString
  targetAddrCurCfgTransIp IpAddress
  targetAddrCurCfgTransPort INTEGER
  targetAddrCurCfgTagList DisplayString
  targetAddrCurCfgParamsName DisplayString
  targetAddrCurCfgTransIpv6 DisplayString
  targetAddrCurCfgIpVer INTEGER
  targetAddrCurCfgTrapBmap OCTET STRING

TargetAddrNewCfgEntry  
SEQUENCE    
  targetAddrNewCfgIndex Integer32
  targetAddrNewCfgName DisplayString
  targetAddrNewCfgTransIp IpAddress
  targetAddrNewCfgTransPort INTEGER
  targetAddrNewCfgTagList DisplayString
  targetAddrNewCfgParamsName DisplayString
  targetAddrNewCfgEnaTrap INTEGER
  targetAddrNewCfgDisTrap INTEGER
  targetAddrNewCfgDelete INTEGER
  targetAddrNewCfgTransIpv6 DisplayString
  targetAddrNewCfgIpVer INTEGER
  targetAddrNewCfgTrapBmap OCTET STRING

AgSnmpErrorTbEntry  
SEQUENCE    
  agSnmpErrorTbRequestId INTEGER
  agSnmpErrorTbVarId OBJECT IDENTIFIER
  agSnmpErrorTbDescription DisplayString
  agSnmpErrorTbErrorIndex INTEGER
  agSnmpErrorTbType INTEGER
  agSnmpErrorTbStatus INTEGER
  agSnmpErrorTbFieldInEntry DisplayString
  agSnmpErrorTbTime DisplayString
  agSnmpErrorTbDate DisplayString

PortStatsTableEntry  
SEQUENCE    
  portStatsIndx Integer32
  portStatsPhyIfInOctets Counter64
  portStatsPhyIfInUcastPkts Counter64
  portStatsPhyIfInNUcastPkts Counter64
  portStatsPhyIfInDiscards Counter32
  portStatsPhyIfInErrors Counter32
  portStatsPhyIfInUnknownProtos Counter32
  portStatsPhyIfOutOctets Counter64
  portStatsPhyIfOutUcastPkts Counter64
  portStatsPhyIfOutNUcastPkts Counter64
  portStatsPhyIfOutDiscards Counter32
  portStatsPhyIfOutErrors Counter32
  portStatsPhyIfOutQLen Gauge32
  portStatsPhyIfInBroadcastPkts Counter64
  portStatsPhyIfOutBroadcastPkts Counter64
  portStatsClear INTEGER
  portStatsPhyIfInMcastPkts Counter64
  portStatsPhyIfOutMcastPkts Counter64

PortMirrorStatsTableEntry  
SEQUENCE    
  portMirrorStatsIndx Integer32
  portMirrorStatsIngress Integer32
  portMirrorStatsEgress Integer32

AgDiffTableEntry  
SEQUENCE    
  agDiffIndex Integer32
  agDiffString OCTET STRING

AgCfgDumpTableEntry  
SEQUENCE    
  agCfgDumpIndex Integer32
  agCfgDumpString OCTET STRING

SpGAStatsCpuUtilTableEntry  
SEQUENCE    
  spGAStatsCpuUtilSpIndex Integer32
  spGAStatsCpuUtilvADC DisplayString
  spGAStatsCpuUtil1Second Integer32
  spGAStatsCpuUtil4Seconds Integer32
  spGAStatsCpuUtil64Seconds Integer32

SpStatsCpuUtilTableEntry  
SEQUENCE    
  spStatsCpuUtilSpIndex Integer32
  spStatsCpuUtil1Second Integer32
  spStatsCpuUtil4Seconds Integer32
  spStatsCpuUtil64Seconds Integer32

SpMaintStatsTableEntry  
SEQUENCE    
  spMaintStatsSpIndex Integer32
  spMaintStatsResolveErrNoddw Counter32
  spMaintStatsLearnErrNoddw Counter32
  spMaintStatsAgeMPNoddw Counter32
  spMaintStatsDeleteMiss Counter32
  spMaintStatsRecvLetErrorsMP Counter32
  spMaintStatsRecvLetErrorsSP1 Counter32
  spMaintStatsRecvLetErrorsSP2 Counter32
  spMaintStatsRecvLetErrorsSP3 Counter32
  spMaintStatsRecvLetErrorsSP4 Counter32
  spMaintStatsSendLetFailsMP Counter32
  spMaintStatsSendLetFailsSP1 Counter32
  spMaintStatsSendLetFailsSP2 Counter32
  spMaintStatsSendLetFailsSP3 Counter32
  spMaintStatsSendLetFailsSP4 Counter32
  spMaintStatsRecvLetSuccessMP Counter32
  spMaintStatsRecvLetSuccessSP1 Counter32
  spMaintStatsRecvLetSuccessSP2 Counter32
  spMaintStatsRecvLetSuccessSP3 Counter32
  spMaintStatsRecvLetSuccessSP4 Counter32
  spMaintStatsSendLetSuccessMP Counter32
  spMaintStatsSendLetSuccessSP1 Counter32
  spMaintStatsSendLetSuccessSP2 Counter32
  spMaintStatsSendLetSuccessSP3 Counter32
  spMaintStatsSendLetSuccessSP4 Counter32
  spMaintStatsRecvLetErrorsSP5 Counter32
  spMaintStatsRecvLetErrorsSP6 Counter32
  spMaintStatsRecvLetErrorsSP7 Counter32
  spMaintStatsSendLetFailsSP5 Counter32
  spMaintStatsSendLetFailsSP6 Counter32
  spMaintStatsSendLetFailsSP7 Counter32
  spMaintStatsRecvLetSuccessSP5 Counter32
  spMaintStatsRecvLetSuccessSP6 Counter32
  spMaintStatsRecvLetSuccessSP7 Counter32
  spMaintStatsSendLetSuccessSP5 Counter32
  spMaintStatsSendLetSuccessSP6 Counter32
  spMaintStatsSendLetSuccessSP7 Counter32
  spMaintStatsRateLimitArpDrops Counter32
  spMaintStatsRateLimitIcmpDrops Counter32
  spMaintStatsRateLimitTcpDrops Counter32
  spMaintStatsRateLimitUdpDrops Counter32
  spMaintStatsPfdbFreeEmpty Counter32

SpMemUsageStatsTableEntry  
SEQUENCE    
  spMemUsageStatsIndex Integer32
  spMemUsageStatsCurrentMemory Integer32
  spMemUsageStatsHiWaterMark Integer32

IpAclBogonInfoTableEntry  
SEQUENCE    
  ipAclBogonInfoIndex Integer32
  ipAclBogonInfoIp IpAddress
  ipAclBogonInfoMask IpAddress

PortStatsPerSecEntry  
SEQUENCE    
  portStatsPortNumber Integer32
  portStatsInOctetsPerSec Counter64
  portStatsInPktsPerSec Counter32
  portStatsInDiscardsPerSec Counter32
  portStatsInErrorsPerSec Counter32
  portStatsOutOctetsPerSec Counter64
  portStatsOutPktsPerSec Counter32
  portStatsOutDiscardsPerSec Counter32
  portStatsOutErrorsPerSec Counter32

Defined Values

agent 1.3.6.1.4.1.1872.2.5.1
The MIB module for the Alteon OS Switch.
MODULE-IDENTITY    

agentConfig 1.3.6.1.4.1.1872.2.5.1.1
OBJECT IDENTIFIER    

agentStats 1.3.6.1.4.1.1872.2.5.1.2
OBJECT IDENTIFIER    

agentInfo 1.3.6.1.4.1.1872.2.5.1.3
OBJECT IDENTIFIER    

agentOper 1.3.6.1.4.1.1872.2.5.1.4
OBJECT IDENTIFIER    

agSystem 1.3.6.1.4.1.1872.2.5.1.1.1
OBJECT IDENTIFIER    

agPortConfig 1.3.6.1.4.1.1872.2.5.1.1.2
OBJECT IDENTIFIER    

agRadiusConfig 1.3.6.1.4.1.1872.2.5.1.1.3
OBJECT IDENTIFIER    

agNTP 1.3.6.1.4.1.1872.2.5.1.1.4
OBJECT IDENTIFIER    

agSyslog 1.3.6.1.4.1.1872.2.5.1.1.5
OBJECT IDENTIFIER    

agTrapHost 1.3.6.1.4.1.1872.2.5.1.1.6
OBJECT IDENTIFIER    

agTftp 1.3.6.1.4.1.1872.2.5.1.1.7
OBJECT IDENTIFIER    

agApply 1.3.6.1.4.1.1872.2.5.1.1.8
OBJECT IDENTIFIER    

agMgmt 1.3.6.1.4.1.1872.2.5.1.1.9
OBJECT IDENTIFIER    

agSslproc 1.3.6.1.4.1.1872.2.5.1.1.10
OBJECT IDENTIFIER    

agTacacsConfig 1.3.6.1.4.1.1872.2.5.1.1.11
OBJECT IDENTIFIER    

agMgmtNetConfig 1.3.6.1.4.1.1872.2.5.1.1.12
OBJECT IDENTIFIER    

agSecurity 1.3.6.1.4.1.1872.2.5.1.1.14
OBJECT IDENTIFIER    

agPortAccessCfg 1.3.6.1.4.1.1872.2.5.1.1.16
OBJECT IDENTIFIER    

agSave 1.3.6.1.4.1.1872.2.5.1.1.17
OBJECT IDENTIFIER    

agFileTransfer 1.3.6.1.4.1.1872.2.5.1.1.18
OBJECT IDENTIFIER    

agAccess 1.3.6.1.4.1.1872.2.5.1.1.19
OBJECT IDENTIFIER    

agSnmpSetFail 1.3.6.1.4.1.1872.2.5.1.1.22
OBJECT IDENTIFIER    

agAlertThreshold 1.3.6.1.4.1.1872.2.5.1.1.23
OBJECT IDENTIFIER    

agVLANAccessCfg 1.3.6.1.4.1.1872.2.5.1.1.24
OBJECT IDENTIFIER    

agPgroup 1.3.6.1.4.1.1872.2.5.1.1.14.1
OBJECT IDENTIFIER    

ipAclCfg 1.3.6.1.4.1.1872.2.5.1.1.14.3
OBJECT IDENTIFIER    

udpBlastCfg 1.3.6.1.4.1.1872.2.5.1.1.14.4
OBJECT IDENTIFIER    

secGeneralCfg 1.3.6.1.4.1.1872.2.5.1.1.14.5
OBJECT IDENTIFIER    

dosAttackPrevCfg 1.3.6.1.4.1.1872.2.5.1.1.14.6
OBJECT IDENTIFIER    

ipDstAclCfg 1.3.6.1.4.1.1872.2.5.1.1.14.7
OBJECT IDENTIFIER    

bogonCfg 1.3.6.1.4.1.1872.2.5.1.1.14.9
OBJECT IDENTIFIER    

pktStats 1.3.6.1.4.1.1872.2.5.1.2.1
OBJECT IDENTIFIER    

mpCpuStats 1.3.6.1.4.1.1872.2.5.1.2.2
OBJECT IDENTIFIER    

portStats 1.3.6.1.4.1.1872.2.5.1.2.3
OBJECT IDENTIFIER    

spStats 1.3.6.1.4.1.1872.2.5.1.2.4
OBJECT IDENTIFIER    

mgmtStats 1.3.6.1.4.1.1872.2.5.1.2.5
OBJECT IDENTIFIER    

securityStats 1.3.6.1.4.1.1872.2.5.1.2.6
OBJECT IDENTIFIER    

agClearStats 1.3.6.1.4.1.1872.2.5.1.2.7
OBJECT IDENTIFIER    

mpMemStats 1.3.6.1.4.1.1872.2.5.1.2.8
OBJECT IDENTIFIER    

ntpStats 1.3.6.1.4.1.1872.2.5.1.2.9
OBJECT IDENTIFIER    

portMirrorStats 1.3.6.1.4.1.1872.2.5.1.2.11
OBJECT IDENTIFIER    

capacityUsageStats 1.3.6.1.4.1.1872.2.5.1.2.12
OBJECT IDENTIFIER    

spGAStats 1.3.6.1.4.1.1872.2.5.1.2.13
OBJECT IDENTIFIER    

hardware 1.3.6.1.4.1.1872.2.5.1.3.1
OBJECT IDENTIFIER    

portInfo 1.3.6.1.4.1.1872.2.5.1.3.2
OBJECT IDENTIFIER    

swKeyInfo 1.3.6.1.4.1.1872.2.5.1.3.3
OBJECT IDENTIFIER    

agDiff 1.3.6.1.4.1.1872.2.5.1.3.4
OBJECT IDENTIFIER    

agCfgDump 1.3.6.1.4.1.1872.2.5.1.3.5
OBJECT IDENTIFIER    

mgmtInfo 1.3.6.1.4.1.1872.2.5.1.3.6
OBJECT IDENTIFIER    

securityInfo 1.3.6.1.4.1.1872.2.5.1.3.7
OBJECT IDENTIFIER    

capacityInfo 1.3.6.1.4.1.1872.2.5.1.3.9
OBJECT IDENTIFIER    

agNTPOper 1.3.6.1.4.1.1872.2.5.1.4.2
OBJECT IDENTIFIER    

agLicenseInfo 1.3.6.1.4.1.1872.2.5.1.3.10
OBJECT IDENTIFIER    

agLicenseOper 1.3.6.1.4.1.1872.2.5.1.4.3
OBJECT IDENTIFIER    

agLicenseConfig 1.3.6.1.4.1.1872.2.5.1.1.21
OBJECT IDENTIFIER    

agSysPeerConfig 1.3.6.1.4.1.1872.2.5.1.1.25
OBJECT IDENTIFIER    

agSecIpAclOper 1.3.6.1.4.1.1872.2.5.1.4.4
OBJECT IDENTIFIER    

agUserPasswdOper 1.3.6.1.4.1.1872.2.5.1.4.5
OBJECT IDENTIFIER    

agSyslogOper 1.3.6.1.4.1.1872.2.5.1.4.6
OBJECT IDENTIFIER    

agPeerSyncOper 1.3.6.1.4.1.1872.2.5.1.4.8
OBJECT IDENTIFIER    

hwTemperatureStatus 1.3.6.1.4.1.1872.2.5.1.3.1.3
The status of the temperature sensor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), exceed(2)  

hwFanStatus 1.3.6.1.4.1.1872.2.5.1.3.1.4
The status of the fan.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), fail(2)  

switchCapL2Info 1.3.6.1.4.1.1872.2.5.1.3.9.1
OBJECT IDENTIFIER    

switchCapL3Info 1.3.6.1.4.1.1872.2.5.1.3.9.2
OBJECT IDENTIFIER    

switchCapSlbInfo 1.3.6.1.4.1.1872.2.5.1.3.9.3
OBJECT IDENTIFIER    

switchCapSlbPortInfo 1.3.6.1.4.1.1872.2.5.1.3.9.4
OBJECT IDENTIFIER    

switchCapBwmInfo 1.3.6.1.4.1.1872.2.5.1.3.9.5
OBJECT IDENTIFIER    

switchCapSecInfo 1.3.6.1.4.1.1872.2.5.1.3.9.6
OBJECT IDENTIFIER    

switchCapGeneralInfo 1.3.6.1.4.1.1872.2.5.1.3.9.7
OBJECT IDENTIFIER    

switchCapFDBMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.1.1
Maximum number of entries for FDB in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapFDBCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.1.2
Current number of entries for FDB in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapFDBPerSPMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.1.3
Maximun number of entries for FDB per SP in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapVlanMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.1.4
Maximum number of entries for vlan in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapVlanCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.1.5
Current number of entries for vlan in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapStaticTrunkGrpsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.1.6
Maximum number of entries for static trunk groups in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapStaticTrunkGrpsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.1.7
Current number of entries for static trunk groups in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapLACPTrunkGRs 1.3.6.1.4.1.1872.2.5.1.3.9.1.8
LACP Trunk groups in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapTrunksperTrunkGR 1.3.6.1.4.1.1872.2.5.1.3.9.1.9
Trunks per trunk group in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapSTGsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.1.10
Maximum number of entries for STG in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapSTGsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.1.11
Current number of entries for STG in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapPortTeamsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.1.12
Maximum number of entries for port teams in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapPortTeamsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.1.13
Current number of entries for port teams in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapMonitorPorts 1.3.6.1.4.1.1872.2.5.1.3.9.1.14
Maximum number of monitor ports.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapIpIntfMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.1
Maximum number of entries for interfaces in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapIpIntfCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.2
Current number of entries for interfaces in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapIpGWMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.3
Maximum number of entries for gateways in device, the value is in the form x+y where 'x' indicates number of default gateways and 'y' indicates number of VLAN gateways.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapIpGWCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.4
Current number of entries for gateways in device, the value is in the form x+y(a+b) where 'x' indicates number of current default gateways, 'y' indicates number of current VLAN gateways, 'a' indicates number of enabled default gateways, 'b' indicates number of enabled VLAN gateways only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapIpRoutesMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.5
Maximum number of entries for routes in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapIpRoutesCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.6
Current number of entries for routes in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapIpStaticRoutesMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.7
Maximum number of entries for static routes in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapIpStaticRoutesCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.8
Current number of entries for static routes in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapIpARPMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.9
Maximum number of entries for ARP in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapIpARPCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.10
Current number of entries for ARP in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapIpStaticARPMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.11
Maximum number of entries for static ARP in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapIpStaticARPCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.12
Current number of entries for static ARP in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapLocNetsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.13
Maximum number of entries for local nets in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapLocNetsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.14
Current number of entries for local nets in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapDNSSerMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.15
Maximum number of entries for DNS servers in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapDNSSerCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.16
Current number of entries for DNS servers in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapBootpSerMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.17
Maximum number of entries for BOOTP servers in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapBootpSerCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.18
Current number of entries for BOOTP servers in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapRIPIntfMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.19
Maximum number of entries of RIP interfaces in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapRIPIntfCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.20
Current number of entries of RIP interfaces in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapOSPFIntfMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.21
Maximum number of entries for OSPF interfaces in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapOSPFIntfCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.22
Current number of entries for OSPF interfaces in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapOSPFAreasMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.23
Maximum number of entries for OSPF areas in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapOSPFAreasCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.24
Current number of entries for OSPF areas in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapOSPFSummaryRangesMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.25
Maximum number of entries for OSPF summary ranges in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapOSPFSummaryRangesCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.26
Current number of entries for OSPF summary ranges in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapOSPFVirtLinksMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.27
Maximum number of entries for OSPF virtual links in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapOSPFVirtLinksCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.28
Current number of entries for OSPF virtual links in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapOSPFHostsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.29
Maximum number of entries for OSPF hosts in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapOSPFHostsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.30
Current number of entries for OSPF hosts in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapLSDBLimit 1.3.6.1.4.1.1872.2.5.1.3.9.2.31
LSDB limit in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapBGPPeersMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.32
Maximum number of entries for BGP peers in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapBGPPeersCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.33
Current number of entries for BGP peers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapBGPRouteAggrsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.34
Maximum number of entries for BGP route aggregators in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapBGPRouteAggrsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.35
Current number of entries for BGP route aggregators in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapRouteMapsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.36
Maximum number of entries for route maps in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapRouteMapsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.37
Current number of entries for route maps in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapNwkFltsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.38
Maximum number of entries for network filters in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapNwkFltsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.39
Current number of entries for network filters in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapASFlts 1.3.6.1.4.1.1872.2.5.1.3.9.2.40
Maximum number of entries for AS filters in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapVRRPRtrsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.41
Maximum number of entries for VRRP routers in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapVRRPRtrsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.42
Current number of entries for VRRP routers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapVRRPRtrGRsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.43
Maximum number of entries for VRRP router groups in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapVRRPRtrGRsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.44
Current number of entries for VRRP router groups in device,the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapVRRPIntfsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.45
Maximum number of entries for VRRP interfaces in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapVRRPIntfsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.2.46
Current number of entries for VRRP interfaces in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapRealSersMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.1
Maximum number of entries for real servers in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapRealSersCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.2
Current number of entries for real servers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapSerGRsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.3
Maximum number of entries for real server groups in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapSerGRsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.4
Current number of entries for real server groups in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapVirtSersMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.5
Maximum number of entries for virtual servers in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapVirtSersCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.6
Current number of entries for virtual servers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapVirtServicesEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.7
Maximum number of entries for virtual services in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapRealServicesEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.8
Current number of entries for real services in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapRealIDSSer 1.3.6.1.4.1.1872.2.5.1.3.9.3.9
Maximum number of entries for real IDS servers.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapIDSSerGRs 1.3.6.1.4.1.1872.2.5.1.3.9.3.10
Maximum number of entries for IDS server groups.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapGSLBDomainsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.11
Maximum number of entries for global SLB domains in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapGSLBDomainsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.12
Current number of entries for global SLB domains in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapGSLBServicesMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.13
Maximum number of entries for global SLB services in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapGSLBServicesCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.14
Current number of entries for global SLB services in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapGSLBLocSersMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.15
Maximum number of entries for global SLB local servers in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapGSLBLocSersCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.16
Current number of entries for global SLB local servers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapGSLBRemSersMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.17
Maximum number of entries for global SLB remote servers in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapGSLBRemSersCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.18
Current number of entries for global SLB remote servers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapGSLBRemSitesMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.19
Maximum number of entries for global SLB sites in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapGSLBRemSitesCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.20
Current number of entries for global SLB sites in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapGSLBFailoversPerRemSiteMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.21
Maximum number of entries for global SLB failovers per site in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapGSLBFailoversPerRemSiteCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.22
Current number of entries for global SLB failovers per site in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapGSLBNetworksMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.23
Maximum number of entries for global SLB networks in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapGSLBNetworksCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.24
Current number of entries for global SLB networks in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapGSLBGeographicalRegionsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.25
Maximum number of entries for global geographical regions in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapGSLBGeographicalRegionsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.26
Current number of entries for global geographical regions in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapGSLBRulesMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.27
Maximum number of entries for global SLB rules in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapGSLBRulesCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.28
Current number of entries for global SLB rules in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapGSLBMetricsPerRuleMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.29
Maximum number of entries for global SLB metrics per rule in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapGSLBMetricPerRuleCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.30
Current number of entries for global SLB metrics per rule in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapGSLBDNSPersCacheMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.31
Maximum number of entries for global SLB DNS persistence cache in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapGSLBDNSPersCacheCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.32
Current number of entries for global SLB DNS persistence cache in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapFltsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.33
Maximum number of entries for filters in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapFltsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.34
Current number of entries for filters in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapPIPsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.35
Maximum number of entries for PIPs in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapPIPsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.36
Current number of entries for pips in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapScriptHealthChecksMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.37
Maximum number of entries for scriptable health checks in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapScriptHealthChecksCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.38
Current number of entries for scriptable health checks in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapSNMPHealthChecksMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.39
Maximum number of entries for SNMP health checks in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapSNMPHealthChecksCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.40
Current number of entries for snmp health checks in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapRulesforURLParsingMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.41
Maximum number of entries for rules for URL parsing in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapRulesforURLParsingCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.42
Current number of entries for rules for URL parsing in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapSLBSessionsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.43
Maximum number of entries for SLB sessions in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapSLBSessionsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.44
Current number of entries for SLB sessions in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapNumofRportstoVport 1.3.6.1.4.1.1872.2.5.1.3.9.3.45
Maximum number of rports to vport.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapDomianRecordsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.46
Maximum number of entries for domain records in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapDomainRecordsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.47
Current number of entries for domain records in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapMappingPerDomainrecord 1.3.6.1.4.1.1872.2.5.1.3.9.3.48
Maximum number of entries for mapping per domain record in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapNetworkClassesMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.49
Maximum number of entries for network classes in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapNetworkClassesCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.50
Current number of entries for network classes in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapNetworkElementsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.51
Maximum number of entries for network elements in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapNetworkElementsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.3.52
Current number of entries for network elements in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapSlbPortInfoTable 1.3.6.1.4.1.1872.2.5.1.3.9.4.1
The table of slb port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwitchCapSlbPortInfoTableEntry

switchCapSlbPortInfoTableEntry 1.3.6.1.4.1.1872.2.5.1.3.9.4.1.1
A row in the slb port information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwitchCapSlbPortInfoTableEntry  

switchCapSlbPortInfoIndx 1.3.6.1.4.1.1872.2.5.1.3.9.4.1.1.1
Index of switch port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

switchCapSlbPortClientState 1.3.6.1.4.1.1872.2.5.1.3.9.4.1.1.2
Client state on the switch port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

switchCapSlbPortSerState 1.3.6.1.4.1.1872.2.5.1.3.9.4.1.1.3
Server state on the switch port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

switchCapSlbPortFltState 1.3.6.1.4.1.1872.2.5.1.3.9.4.1.1.4
It is in the form E(x) where filter is enabled on the port and x is the number of filters configured for port. Otherwise disable.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

switchCapSlbPortRTSState 1.3.6.1.4.1.1872.2.5.1.3.9.4.1.1.5
RTS processing state on the switch port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

bwmPoliciesMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.5.1
Maximum number of entries for bwm policies in device .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

bwmPoliciesCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.5.2
Current number of entries for bwm policies in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

bwmContsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.5.3
Maximum number of entries for bwm contracts in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

bwmContsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.5.4
Current number of entries for bwm contracts in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

bwmGRsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.5.5
Maximum number of entries for bwm groups in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

bwmGRsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.5.6
Current number of entries for bwm groups in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

bwmContsPerGRs 1.3.6.1.4.1.1872.2.5.1.3.9.5.7
Maximum number of entries for bwm contracts per group in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

bwmTimePoliciesPerCont 1.3.6.1.4.1.1872.2.5.1.3.9.5.8
Current number of entries for bwm time policies per contract.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

configSrcIPACLsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.6.1
Maximum number of entries for configuration source IP ACLs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

configSrcIPACLsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.6.2
Current number of entries for configuration source IP ACLs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

bogonSrcIPACLsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.6.3
Maximum number of entries for bogon source IP ACLs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

bogonSrcIPACLsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.6.4
Current number of entries for bogon source IP ACLs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

operSrcIPACLsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.6.5
Maximum number of entries for operation source IP ACLs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

operSrcIPACLsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.6.6
Current number of entries for operaion source IP ACLs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

totalSrcIPACLsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.6.7
Maximum number of entries for total source IP ACLs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

totalSrcIPACLsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.6.8
Current number of entries for total source IP ACLs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

configDstIPACLsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.6.9
Maximum number of entries for configuration destination IP ACLs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

configDstIPACLsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.6.10
Current number of entries for configuration destination IP ACLs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

operDstIPACLsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.6.11
Maximum number of entries for operation destination IP ACLs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

operDstIPACLsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.6.12
Current number of entries for operaion destination IP ACLs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

totalDstIPACLsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.6.13
Maximum number of entries for total destination IP ACLs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

totalDstIPACLsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.6.14
Current number of entries for total destination IP ACLs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipDosAtkPrevention 1.3.6.1.4.1.1872.2.5.1.3.9.6.15
Maximum number of entries for IP DOS attack prevention.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tcpDosAtkPrevention 1.3.6.1.4.1.1872.2.5.1.3.9.6.16
Maximum number of entries for TCP DOS attack prevention.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

udpDosAtkPrevention 1.3.6.1.4.1.1872.2.5.1.3.9.6.17
Maximum number of entries for UDP DOS attack prevention.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

icmpDosAtkPrevention 1.3.6.1.4.1.1872.2.5.1.3.9.6.18
Maximum number of entries for ICMP DOS attack prevention.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpDosAtkPrevention 1.3.6.1.4.1.1872.2.5.1.3.9.6.19
Maximum number of entries for IGMP DOS attack prevention.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arpDosAtkPrevention 1.3.6.1.4.1.1872.2.5.1.3.9.6.20
Maximum number of entries for ARP DOS attack prevention.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipv6DosAtkPrevention 1.3.6.1.4.1.1872.2.5.1.3.9.6.21
Maximum number of entries for ipv6 DOS attack prevention.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

totalDosAtkPrevention 1.3.6.1.4.1.1872.2.5.1.3.9.6.22
Total number of entries for DOS attack preventions.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

udpBlastProtection 1.3.6.1.4.1.1872.2.5.1.3.9.6.23
Specifies UDP ports for UDP blast protection.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

syslogHostMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.1
Maximum number of entries for syslog hosts in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

syslogHostCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.2
Current number of entries for syslog hosts in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

radiusSerMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.3
Maximum number of entries for radius servers in device .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

radiusSerCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.4
Current number of entries for radius servers in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tacacsSerMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.5
Maximum number of entries for tacacs+ server in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tacacsSerCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.6
Current number of entries for tacacs+ server in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ntpSerMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.7
Maximum number of entries for ntp servers in device .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ntpSerCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.8
Current number of entries for ntp servers in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

smtpHostsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.9
Maximum number of entries for smtp hosts in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

smtpHostsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.10
Current number of entries for smtp hosts in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mgmtNetworksMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.11
Maximum number of entries for management networks in device .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mgmtNetworksCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.12
Current number of entries for management networks in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

endUsers 1.3.6.1.4.1.1872.2.5.1.3.9.7.13
Maximum number of entries for end users in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

panicDumps 1.3.6.1.4.1.1872.2.5.1.3.9.7.14
Maximum panic dumps in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

snmpv3UsersMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.17
Maximum number of entries for snmpv3 users in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

snmpv3UsersCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.18
Current number of entries for snmpv3 users in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

snmpv3ViewsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.19
Maximum number of entries for snmpv3 views in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

snmpv3ViewsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.20
Current number of entries for snmpv3 views in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

snmpv3AccessGRsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.21
Maximum number of entries for snmpv3 access groups in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

snmpv3AccessGRsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.22
Current number of entries for snmpv3 access groups in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

snmpv3TargetAddrMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.23
Maximum number of entries for snmpv3 target addresses in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

snmpv3TargetAddrCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.24
Current number of entries for snmpv3 target addresses in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

snmpv3TargetParamsMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.25
Maximum number of entries for snmpv3 target parameters in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

snmpv3TargetParamsCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.26
Current number of entries for snmpv3 target parameters in device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ramSize 1.3.6.1.4.1.1872.2.5.1.3.9.7.27
RAM Size (GB).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hardDiskMax 1.3.6.1.4.1.1872.2.5.1.3.9.7.28
Hard Disk Maximum Capicity (GB).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hardDiskCur 1.3.6.1.4.1.1872.2.5.1.3.9.7.29
Hard Disk In Use (GB).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cacheUsageMaxEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.30
Total Cache available in MB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cacheUsageCurrEnt 1.3.6.1.4.1.1872.2.5.1.3.9.7.31
Current Cache Usage in MB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agLicenseInfoTable 1.3.6.1.4.1.1872.2.5.1.3.10.1
The table of license Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgLicenseInfoTableEntry

agLicenseInfoTableEntry 1.3.6.1.4.1.1872.2.5.1.3.10.1.1
A row in the license Information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgLicenseInfoTableEntry  

licenseInfoIdx 1.3.6.1.4.1.1872.2.5.1.3.10.1.1.1
The license index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

softwareKey 1.3.6.1.4.1.1872.2.5.1.3.10.1.1.2
The Sofware Key.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

licenseType 1.3.6.1.4.1.1872.2.5.1.3.10.1.1.3
The License Type information.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER permanent(1), temporary(2), removed(3), expired(4)  

remainingDays 1.3.6.1.4.1.1872.2.5.1.3.10.1.1.4
The number of days left for temporary license.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

remainingDaysLeft 1.3.6.1.4.1.1872.2.5.1.3.10.1.1.5
The number of days/hours left for temporary license.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

licenseSize 1.3.6.1.4.1.1872.2.5.1.3.10.1.1.6
The available size of license. Value -1 defines unlimited license.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

licenseAllocated 1.3.6.1.4.1.1872.2.5.1.3.10.1.1.7
The totally allocated license to vADC's. Value -1 defines unlimited license
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agLicenseInfoConvStatus 1.3.6.1.4.1.1872.2.5.1.3.10.2
This object, when read, gives the information to the user whether auto conversion is needed or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER licConvDone(0), licCookieConvPending(1)  

agLicenseCapacityInfoTable 1.3.6.1.4.1.1872.2.5.1.3.10.3
The table of license Capacity Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgLicenseCapacityInfoTableEntry

agLicenseCapacityInfoTableEntry 1.3.6.1.4.1.1872.2.5.1.3.10.3.1
A row in the license Capacity Information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgLicenseCapacityInfoTableEntry  

licenseCapacityInfoIdx 1.3.6.1.4.1.1872.2.5.1.3.10.3.1.1
The capacity license table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

licenseCapacitySize 1.3.6.1.4.1.1872.2.5.1.3.10.3.1.2
The available size of license. Value -1 defines unlimited license
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

licenseCapacityAllocated 1.3.6.1.4.1.1872.2.5.1.3.10.3.1.3
The totally allocated license to vADC's. Value -1 defines unlimited license
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

licenseKey 1.3.6.1.4.1.1872.2.5.1.4.3.1
Current License key.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..108)  

licenseDelete 1.3.6.1.4.1.1872.2.5.1.4.3.2
This is an action object to delete specific feature license other(10) is returned always when read.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER deleteGlobal(1), deleteBwm(2), deleteSecurity(4), deleteLlb(5), deleteItm(6), deleteCookie(7), deleteSymantec(8), deleteSlb(9), other(10), deleteServices(11), deletevADC(12)  

automaticConvType 1.3.6.1.4.1.1872.2.5.1.4.3.3
License- Conversion type Automatic.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), automatic(2)  

automaticConvStatus 1.3.6.1.4.1.1872.2.5.1.4.3.4
Automatic License Conversion status.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

throPutLicenseKey 1.3.6.1.4.1.1872.2.5.1.4.3.5
Throughput License key.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..108)  

sslLicenseKey 1.3.6.1.4.1.1872.2.5.1.4.3.6
SSL License key.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..108)  

compressionLicenseKey 1.3.6.1.4.1.1872.2.5.1.4.3.7
Compression License key.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..108)  

vADCLicenseKey 1.3.6.1.4.1.1872.2.5.1.4.3.9
vADC License key.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..108)  

agUserNewPasswdOper 1.3.6.1.4.1.1872.2.5.1.4.5.1
Enter New User Password.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agSecIpAclOperAdd 1.3.6.1.4.1.1872.2.5.1.4.4.1
OBJECT IDENTIFIER    

agSecIpAclOperRem 1.3.6.1.4.1.1872.2.5.1.4.4.2
OBJECT IDENTIFIER    

agSecIpAclOperRemAll 1.3.6.1.4.1.1872.2.5.1.4.4.3
This is an action object to Remove all operations source IP Address/Mask. When set to a value of remove(2) it removes All source IPACL entries. ok(1) is returned when the object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), remove(2)  

agSecIpAclOperDestAdd 1.3.6.1.4.1.1872.2.5.1.4.4.4
OBJECT IDENTIFIER    

agSecIpAclOperDestRem 1.3.6.1.4.1.1872.2.5.1.4.4.5
OBJECT IDENTIFIER    

agSecIpAclOperDestRemAll 1.3.6.1.4.1.1872.2.5.1.4.4.6
This is an action object to Remove all destination IP Address/Mask. When set to a value of remove(2) it removes All destination IPACL entries. ok(1) is returned when the object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), remove(2)  

agSecIpAclOperList 1.3.6.1.4.1.1872.2.5.1.4.4.7
OBJECT IDENTIFIER    

agSecIpAclOperAddSrcIp 1.3.6.1.4.1.1872.2.5.1.4.4.1.1
Add IP ACL source IP Address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agSecIpAclOperAddMask 1.3.6.1.4.1.1872.2.5.1.4.4.1.2
Add IP ACL source Netmask.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agSecIpAclOperAddTimeOut 1.3.6.1.4.1.1872.2.5.1.4.4.1.3
timeout in minutes
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10080  

agSecIpAclOperAddIp 1.3.6.1.4.1.1872.2.5.1.4.4.1.4
This is an action object ,when set to a value of add(2), it Add operations source IP Address/Mask.Ok(1) is returned when object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), add(2)  

agSecIpAclOperRemIp 1.3.6.1.4.1.1872.2.5.1.4.4.2.1
Enter source IP Address for Remove operations
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agSecIpAclOperRemMask 1.3.6.1.4.1.1872.2.5.1.4.4.2.2
Enter source Netmask for Remove operations.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agSecIpAclOperRemove 1.3.6.1.4.1.1872.2.5.1.4.4.2.3
This is an action object ,when set to a value of remove(2), it Remove operations source IP Address/Mask. Ok(1) is returned when object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), remove(2)  

agSecIpAclOperDestAddIpAddr 1.3.6.1.4.1.1872.2.5.1.4.4.4.1
Add IP ACL Operations destination IP Address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agSecIpAclOperDestAddMask 1.3.6.1.4.1.1872.2.5.1.4.4.4.2
Add IP ACL Operations destination Netmask.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agSecIpAclOperDestAddTimeOut 1.3.6.1.4.1.1872.2.5.1.4.4.4.3
destination timeout in minutes
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10080  

agSecIpAclOperDestAddIp 1.3.6.1.4.1.1872.2.5.1.4.4.4.4
This is an action object ,when set to a value of add(2), it Add operations destination IP Address/Mask.Ok(1) is returned when object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), add(2)  

agSecIpAclOperDestRemIp 1.3.6.1.4.1.1872.2.5.1.4.4.5.1
Enter destination IP Address for Remove operations
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agSecIpAclOperDestRemMask 1.3.6.1.4.1.1872.2.5.1.4.4.5.2
Enter destination IP Netmask for Remove operations.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agSecIpAclOperDestRemove 1.3.6.1.4.1.1872.2.5.1.4.4.5.4
This is an action object ,when set to a value of add(2), it remove operations destination IP Address/Mask. Ok(1) is returned when object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), remove(2)  

agSecIpAclOperListSumm 1.3.6.1.4.1.1872.2.5.1.4.4.7.1
OBJECT IDENTIFIER    

agSecIpAclOperListSummCfgSrc 1.3.6.1.4.1.1872.2.5.1.4.4.7.1.1
Configuration source IP ACL Summary.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSecIpAclOperListSummCfgDst 1.3.6.1.4.1.1872.2.5.1.4.4.7.1.2
Configuration Destination IP ACL Summary.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSecIpAclOperListSummOperSrc 1.3.6.1.4.1.1872.2.5.1.4.4.7.1.3
Operations source IP ACL Summary.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSecIpAclOperListSummOperDst 1.3.6.1.4.1.1872.2.5.1.4.4.7.1.4
Operations Destination IP ACL Summary.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSecIpAclOperListSummBogonSrc 1.3.6.1.4.1.1872.2.5.1.4.4.7.1.5
Bogon source IP ACL Summary.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSecIpAclOperListSummTotSrc 1.3.6.1.4.1.1872.2.5.1.4.4.7.1.6
Total source IP ACL Summary.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSecIpAclOperListSummTotDst 1.3.6.1.4.1.1872.2.5.1.4.4.7.1.7
Total Destination IP ACL Summary.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSecIpAclOperSrcTable 1.3.6.1.4.1.1872.2.5.1.4.4.7.2
The table of IP ACL Oper Config Source Ip.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgSecIpAclOperListSrcTableEntry

agSecIpAclOperSrcTableEntry 1.3.6.1.4.1.1872.2.5.1.4.4.7.2.1
A row in the agSecIpAclOperSrcTable table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgSecIpAclOperListSrcTableEntry  

agSecIpAclOperListSrcIndx 1.3.6.1.4.1.1872.2.5.1.4.4.7.2.1.1
The IP ACL Oper Config Source Group index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSecIpAclOperListSrcAddr 1.3.6.1.4.1.1872.2.5.1.4.4.7.2.1.2
Oper IP ACL Config Source IP Address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agSecIpAclOperListSrcMask 1.3.6.1.4.1.1872.2.5.1.4.4.7.2.1.3
Oper IP ACL Config Source NetMask.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agSecIpAclOperListSrcTimeOut 1.3.6.1.4.1.1872.2.5.1.4.4.7.2.1.4
Config Source Ip Timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSecIpAclOperDstTable 1.3.6.1.4.1.1872.2.5.1.4.4.7.3
The table of Operations Source IP ACL.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgSecIpAclOperDstTableEntry

agSecIpAclOperDstTableEntry 1.3.6.1.4.1.1872.2.5.1.4.4.7.3.1
A row in the agSecIpAclOperDstTable table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgSecIpAclOperDstTableEntry  

agSecIpAclOperDstIndx 1.3.6.1.4.1.1872.2.5.1.4.4.7.3.1.1
The IP ACL Oper Destination IP Group index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSecIpAclOperDstAddr 1.3.6.1.4.1.1872.2.5.1.4.4.7.3.1.2
IP ACL Operations Destination IP Address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agSecIpAclOperDstMask 1.3.6.1.4.1.1872.2.5.1.4.4.7.3.1.3
IP ACL Operations Destination NetMask.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agSecIpAclOperDstTimeout 1.3.6.1.4.1.1872.2.5.1.4.4.7.3.1.4
IP ACL Operations Destination Ip Timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSyslogOperDispLog 1.3.6.1.4.1.1872.2.5.1.4.6.1
This an action object which is used to enable/disable displaying syslog messages to telnet/ssh sessions.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agPortOperTable 1.3.6.1.4.1.1872.2.5.1.4.1
The table of port operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgPortOperTableEntry

agPortOperTableEntry 1.3.6.1.4.1.1872.2.5.1.4.1.1
A row in the port operations table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgPortOperTableEntry  

portOperIdx 1.3.6.1.4.1.1872.2.5.1.4.1.1.1
The port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portOperState 1.3.6.1.4.1.1872.2.5.1.4.1.1.2
Enable/Disable port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

portOperRmon 1.3.6.1.4.1.1872.2.5.1.4.1.1.3
Enable/Disable RMON for port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agClearAppLog 1.3.6.1.4.1.1872.2.5.1.4.7
This is an action object.When set to a value of clear(2) application services trace Logs will be cleared. ok(1) is returned when read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), clear(2)  

ntpOperSendReq 1.3.6.1.4.1.1872.2.5.1.4.2.1
Allows the user to send requests to the NTP server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

agPeerSyncConfigOper 1.3.6.1.4.1.1872.2.5.1.4.8.1
Allows the user to send oper sync requests.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), sync(2)  

portInfoTable 1.3.6.1.4.1.1872.2.5.1.3.2.1
The table of port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortInfoTableEntry

portInfoTableEntry 1.3.6.1.4.1.1872.2.5.1.3.2.1.1
A row in the port information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortInfoTableEntry  

portInfoIndx 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.1
The port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portInfoSpeed 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.2
The current operational speed of the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER mbs10(2), mbs100(3), mbs1000(4), any(5), mbs10000(6)  

portInfoMode 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.3
The current operational mode of the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER full-duplex(2), half-duplex(3), any(4)  

portInfoFlowCtrl 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.4
The current operational flow control of the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER transmit(2), receive(3), both(4), none(5)  


portInfoPhyIfDescr 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.6
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

portInfoPhyIfType 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.7
The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), regular1822(2), hdh1822(3), ddn-x25(4), rfc877-x25(5), ethernet-csmacd(6), iso88023-csmacd(7), iso88024-tokenBus(8), iso88025-tokenRing(9), iso88026-man(10), starLan(11), proteon-10Mbit(12), proteon-80Mbit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), e1(19), basicISDN(20), primaryISDN(21), propPointToPointSerial(22), ppp(23), softwareLoopback(24), eon(25), ethernet-3Mbit(26), nsip(27), slip(28), ultra(29), ds3(30), sip(31), frame-relay(32)  

portInfoPhyIfMtu 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.8
The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portInfoPhyIfPhysAddress 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.9
The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

portInfoPhyIfOperStatus 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.10
The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

portInfoPhyIfLastChange 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.11
The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

portInfoPhyConnType 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.12
The physical connection type, i.e. copper or SFP port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER feCopper(1), geCopper(2), geSFP(3), unknown(4), xGeSFP(5)  

portInfoPreferred 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.13
The port preferred connection type. For dual ports only
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER invalid(1), copper(2), sfp(3)  

portInfoBackup 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.14
The port backup setting. For dual ports only
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER invalid(1), none(2), copper(3), sfp(4)  

portInfoSFPName 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.15
A textual string containing information about the SFP manufacturer. For valid ports only.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

portInfoSFPType 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.17
The inserted SFP type. For valid ports only.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER invalid(1), sfpTypeSX(2), sfpTypeLX(3), sfpTypeCX(4), sfpTypeCopper(5)  

portInfoShared 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.18
Indicates if the port is shared or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

portInfoVADC 1.3.6.1.4.1.1872.2.5.1.3.2.1.1.19
The vADC number that the port belongs to.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

agEnabledSwFeatures 1.3.6.1.4.1.1872.2.5.1.3.3.1
The software features that are enabled on the switch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agEnabledGslbKey 1.3.6.1.4.1.1872.2.5.1.3.3.2
Query if software key Global slb enabled on switch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agEnabledBwmKey 1.3.6.1.4.1.1872.2.5.1.3.3.3
Query if software key Bandwidth Mgmt. enabled on switch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agEnabledSecurityKey 1.3.6.1.4.1.1872.2.5.1.3.3.4
Query if software key Security enabled on switch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agEnabledLinklbKey 1.3.6.1.4.1.1872.2.5.1.3.3.6
Query if software key Inbound Linklb is enabled on switch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agApplyConfiguration 1.3.6.1.4.1.1872.2.5.1.1.1.2
This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block. other(1) is returned when this object ie read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), apply(2)  

agSavePending 1.3.6.1.4.1.1872.2.5.1.1.1.3
This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER saveNeeded(1), noSaveNeeded(2)  

agSaveConfiguration 1.3.6.1.4.1.1872.2.5.1.1.1.4
This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), saveActive(2), notSaveActive(3)  

agRevert 1.3.6.1.4.1.1872.2.5.1.1.1.5
This is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. This action will copy the current_config to the new_config block. other(1) is returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), revert(2)  

agRevertApply 1.3.6.1.4.1.1872.2.5.1.1.1.6
This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), revertApply(2)  

agReset 1.3.6.1.4.1.1872.2.5.1.1.1.7
This is an action object to reboot the agent. other(1) is returned always when read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

agConfigForNxtReset 1.3.6.1.4.1.1872.2.5.1.1.1.8
The configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup configuration block default(4)..default configuration block
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(2), backup(3), default(4)  

agImageForNxtReset 1.3.6.1.4.1.1872.2.5.1.1.1.9
The software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2 ...
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 2..11  

agSoftwareVersion 1.3.6.1.4.1.1872.2.5.1.1.1.10
The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

agBootVer 1.3.6.1.4.1.1872.2.5.1.1.1.11
The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

agImage1Ver 1.3.6.1.4.1.1872.2.5.1.1.1.12
The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agImage2Ver 1.3.6.1.4.1.1872.2.5.1.1.1.13
The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agRtcDate 1.3.6.1.4.1.1872.2.5.1.1.1.14
The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

agRtcTime 1.3.6.1.4.1.1872.2.5.1.1.1.15
The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

agLastSetErrorReason 1.3.6.1.4.1.1872.2.5.1.1.1.16
The error reason of the last SET failure.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

agCurCfgHttpServerPort 1.3.6.1.4.1.1872.2.5.1.1.1.17
The TCP port number that the HTTP server is listening to in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

agNewCfgHttpServerPort 1.3.6.1.4.1.1872.2.5.1.1.1.18
The TCP port number that the HTTP server is listening to in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

agCurCfgLoginBanner 1.3.6.1.4.1.1872.2.5.1.1.1.19
The user defined login banner.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..79)  

agNewCfgLoginBanner 1.3.6.1.4.1.1872.2.5.1.1.1.20
The user defined login banner.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..79)  

agCurCfgSmtpHost 1.3.6.1.4.1.1872.2.5.1.1.1.21
The user defined SMTP host.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..127)  

agNewCfgSmtpHost 1.3.6.1.4.1.1872.2.5.1.1.1.22
The user defined SMTP host. If it is a host name than please configure agNewCfgSmtpHostIPVersion. By default IPv4 version will be choosen. If IPv4 or Ipv6 address is configured than no need to configure agNewCfgSmtpHostIPVersion, this will be filled accordingly.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

agCurCfgConsole 1.3.6.1.4.1.1872.2.5.1.1.1.23
Enable or disable console output of syslog messages.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgConsole 1.3.6.1.4.1.1872.2.5.1.1.1.24
Enable or disable console output of syslog messages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgBootp 1.3.6.1.4.1.1872.2.5.1.1.1.29
Enable or disable the use of BootP, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agNewCfgBootp 1.3.6.1.4.1.1872.2.5.1.1.1.30
Enable or disable the use of BootP, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agCurCfgSnmpTimeout 1.3.6.1.4.1.1872.2.5.1.1.1.32
Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..30  

agNewCfgSnmpTimeout 1.3.6.1.4.1.1872.2.5.1.1.1.33
Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..30  

agCurCfgTelnetServerPort 1.3.6.1.4.1.1872.2.5.1.1.1.34
The TCP port number that the telnet server listens for telnet sessions.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

agNewCfgTelnetServerPort 1.3.6.1.4.1.1872.2.5.1.1.1.35
The TCP port number that the telnet server listens for telnet sessions.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

agClearFlashDump 1.3.6.1.4.1.1872.2.5.1.1.1.36
This is an action object to clear the FLASH dump. ok(1) is returned when this object is read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), clear(2)  

agCurCfgTrapSrcIf 1.3.6.1.4.1.1872.2.5.1.1.1.39
The SNMP trap source interface number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agNewCfgTrapSrcIf 1.3.6.1.4.1.1872.2.5.1.1.1.40
The SNMP trap source interface number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

agCurCfgARPMaxRate 1.3.6.1.4.1.1872.2.5.1.1.1.41
The maximum allowed rate of MP-destined ARP packets.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

agNewCfgARPMaxRate 1.3.6.1.4.1.1872.2.5.1.1.1.42
The maximum allowed rate of MP-destined ARP packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

agCurCfgICMPMaxRate 1.3.6.1.4.1.1872.2.5.1.1.1.43
The maximum allowed rate of MP-destined ICMP packets.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

agNewCfgICMPMaxRate 1.3.6.1.4.1.1872.2.5.1.1.1.44
The maximum allowed rate of MP-destined ICMP packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

agCurCfgTCPMaxRate 1.3.6.1.4.1.1872.2.5.1.1.1.45
The maximum allowed rate of MP-destined TCP packets.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

agNewCfgTCPMaxRate 1.3.6.1.4.1.1872.2.5.1.1.1.46
The maximum allowed rate of MP-destined TCP packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

agCurCfgUDPMaxRate 1.3.6.1.4.1.1872.2.5.1.1.1.47
The maximum allowed rate of MP-destined UDP packets.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

agNewCfgUDPMaxRate 1.3.6.1.4.1.1872.2.5.1.1.1.48
The maximum allowed rate of MP-destined UDP packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

agCurCfgHttpsServerPort 1.3.6.1.4.1.1872.2.5.1.1.1.49
The TCP port number that the HTTPS server is listening to in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

agNewCfgHttpsServerPort 1.3.6.1.4.1.1872.2.5.1.1.1.50
The TCP port number that the HTTPS server is listening to in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

agCurDaylightSavings 1.3.6.1.4.1.1872.2.5.1.1.1.55
The daylight savings location.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), africa-Algeria(1), africa-Angola(2), africa-Benin(3), africa-Botswana(4), africa-Burkina-Faso(5), africa-Burundi(6), africa-Cameroon(7), africa-Central-African-Rep(8), africa-Chad(9), africa-Congo-WestDemRepCongo(10), africa-Congo-EastDemRepCongo(11), africa-Congo-Rep(12), africa-Cote-dIvoire(13), africa-Djibouti(14), africa-Egypt(15), africa-Equatorial-Guinea(16), africa-Eritrea(17), africa-Ethiopia(18), africa-Gabon(19), africa-Gambia(20), africa-Ghana(21), africa-Guinea(22), africa-Guinea-Bissau(23), africa-Kenya(24), africa-Lesotho(25), africa-Liberia(26), africa-Libya(27), africa-Malawi(28), africa-Mali-SouthWestMali(29), africa-Mali-NorthEastMali(30), africa-Mauritania(31), africa-Morocco(32), africa-Mozambique(33), africa-Namibia(34), africa-Niger(35), africa-Nigeria(36), africa-Rwanda(37), africa-SaoTome-And-Principe(38), africa-Senegal(39), africa-SierraLeone(40), africa-Somalia(41), africa-SouthAfrica(42), africa-Spain-Mainland(43), africa-Spain-CeutaMelilla(44), africa-Spain-CanaryIslands(45), africa-Sudan(46), africa-Swaziland(47), africa-Tanzania(48), africa-Togo(49), africa-Tunisia(50), africa-Uganda(51), africa-Western-Sahara(52), africa-Zambia(53), africa-Zimbabwe(54), americas-Anguilla(55), americas-Antigua-Barbuda(56), americas-Argentina-EArgentina(57), americas-Argentina-MostLocations(58), americas-Argentina-Jujuy(59), americas-Argentina-Catamarca(60), americas-Argentina-Mendoza(61), americas-Aruba(62), americas-Bahamas(63), americas-Barbados(64), americas-Belize(65), americas-Bolivia(66), americas-Brazil-AtlanticIslands(67), americas-Brazil-AmapaEPara(68), americas-Brazil-NEBrazil(69), americas-Brazil-Pernambuco(70), americas-Brazil-Tocantins(71), americas-Brazil-AlagoasSergipe(72), americas-Brazil-SSEBrazil(73), americas-Brazil-MatoGrossoDoSul(74), americas-Brazil-WParaRondonia(75), americas-Brazil-Roraima(76), americas-Brazil-EAmazonas(77), americas-Brazil-WAmazonas(78), americas-Brazil-Acre(79), americas-Canada-NewfoundlandIsland(80), americas-Canada-AtlanTime-NovaScotia(81), americas-Canada-AtlanTime-ELabrador(82), americas-Canada-EastTime-OntarioMostlocation(83), americas-Canada-EastTime-ThunderBay(84), americas-Canada-EastStdTime-PangnirtungNunavut(85), americas-Canada-EastStdTime-EastNunavut(86), americas-Canada-EastStdTime-CenNunavut(87), americas-Canada-CenTime-ManitobaWestOntario(88), americas-Canada-CenTime-RainyRiver(89), americas-Canada-CenTime-WestNunavut(90), americas-Canada-CenStdTime-SaskatchewanMostlocation(91), americas-Canada-CenStdTime-SaskatchewanMidwest(92), americas-Canada-MountTime-AlbertaEastBritishColumbia(93), americas-Canada-MountTime-CentralNorthwestTerritories(94), americas-Canada-MountTime-WestNorthwestTerritories(95), americas-Canada-MountStdTime-DawsonCrkStJohnBritColumbia(96), americas-Canada-PacificTime-WestBritishColumbia(97), americas-Canada-PacificTime-SouthYukon(98), americas-Canada-PacificTime-NorthYukon(99), americas-CaymanIslands(100), americas-Chile-MostLocation(101), americas-Chile-EasterIsland(102), americas-Colombia(103), americas-CostaRica(104), americas-Cuba(105), americas-Dominica(106), americas-DominicanRepublic(107), americas-Ecuador(108), americas-ElSalvado(109), americas-FrenchGuiana(110), americas-Greenland-MostLocation(111), americas-Greenland-EastCoastNorthScoresbysund(112), americas-Greenland-ScoresbysundIttoqqortoormiit(113), americas-Greenland-ThulePituffik(114), americas-Grenada(115), americas-Guadeloupe(116), americas-Guatemala(117), americas-Guyana(118), americas-Haiti(119), americas-Honduras(120), americas-Jamaica(121), americas-Martinique(122), americas-Mexico-CentTime-Mostlocations(123), americas-Mexico-CentTime-QuintanaRoo(124), americas-Mexico-CentTime-CampecheYucatan(125), americas-Mexico-CTime-CoahuilaDurangoNuevoLeonTamaulipas(126), americas-Mexico-MountTime-SBajaNayaritSinaloa(127), americas-Mexico-MountTime-Chihuahua(128), americas-Mexico-MountStdTime-Sonora(129), americas-Mexico-PacificTime(130), americas-Montserrat(131), americas-NetherlandsAntilles(132), americas-Nicaragua(133), americas-Panama(134), americas-Paraguay(135), americas-Peru(136), americas-PuertoRico(137), americas-StKittsAndNevis(138), americas-StLucia(139), americas-StPierreAndMiquelon(140), americas-StVincent(141), americas-Suriname(142), americas-TrinidadAndTobago(143), americas-TurksAndCaicosIs(144), americas-USA-EastTime(145), americas-USA-EastTime-MichiganMostLocation(146), americas-USA-EastTime-KentuckyLouisvilleArea(147), americas-USA-EastTime-KentuckyWayneCounty(148), americas-USA-EastStdTime-IndianaMostLocations(149), americas-USA-EastStdTime-IndianaCrawfordCounty(150), americas-USA-EastStdTime-IndianaStarkeCounty(151), americas-USA-EastStdTime-IndianaSwitzerlandCounty(152), americas-USA-CentTime(153), americas-USA-CentTime-MichiganWisconsinborder(154), americas-USA-CentTime-NorthDakotaOliverCounty(155), americas-USA-MountTime(156), americas-USA-MountTime-SouthIdahoAndEastOregon(157), americas-USA-MountTime-Navajo(158), americas-USA-MountStdTime-Arizona(159), americas-USA-PacificTime(160), americas-USA-AlaskaTime(161), americas-USA-AlaskaTime-AlaskaPanhandle(162), americas-USA-AlaskaTime-AlaskaPanhandleNeck(163), americas-USA-AlaskaTime-WestAlaska(164), americas-USA-AleutianIslands(165), americas-USA-Hawaii(166), americas-Uruguay(167), americas-Venezuela(168), americas-VirginIslands-UK(169), americas-VirginIslands-US(170), antarctica-McMurdoStationRossIsland(171), antarctica-Amundsen-ScottStationSouthPole(172), antarctica-PalmerStationAnversIsland(173), antarctica-MawsonStationHolmeBay(174), antarctica-DavisStationVestfoldHills(175), antarctica-CaseyStationBaileyPeninsula(176), antarctica-VostokStationSMagneticPole(177), antarctica-Dumont-dUrvilleBaseTerreAdelie(178), antarctica-SyowaStationEOngulI(179), arcticOcean-Svalbard(180), arcticOcean-JanMayen(181), asia-Afghanistan(182), asia-Armenia(183), asia-Azerbaijan(184), asia-Bahrain(185), asia-Bangladesh(186), asia-Bhutan(187), asia-Brunei(188), asia-Cambodia(189), asia-China-EastChinaBeijingGuangdongShanghai(190), asia-China-Heilongjiang(191), asia-China-CentralChinaGansuGuizhouSichuanYunnan(192), asia-China-TibetmostofXinjiangUyghur(193), asia-China-SouthwestXinjiangUyghur(194), asia-Cyprus(195), asia-EastTimor(196), asia-Georgia(197), asia-HongKong(198), asia-India(199), asia-Indonesia-JavaAndSumatra(200), asia-Indonesia-WestCentralBorneo(201), asia-Indonesia-EstSthBorneoCelebsBaliNusaTengaraWstTimor(202), asia-Indonesia-IrianJayaAndMoluccas(203), asia-Iran(204), asia-Iraq(205), asia-Israel(206), asia-Japan(207), asia-Jordan(208), asia-Kazakhstan-MostLocations(209), asia-Kazakhstan-QyzylordaKyzylorda(210), asia-Kazakhstan-Aqtobe(211), asia-Kazakhstan-AtyrauMangghystau(212), asia-Kazakhstan-WestKazakhstan(213), asia-Korea-North(214), asia-Korea-South(215), asia-Kuwait(216), asia-Kyrgyzstan(217), asia-Laos(218), asia-Lebanon(219), asia-Macau(220), asia-Malaysia-PeninsularMalaysia(221), asia-Malaysia-SabahSarawak(222), asia-Mongolia-MostLocations(223), asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224), asia-Mongolia-DornodSukhbaatar(225), asia-Myanmar(226), asia-Nepal(227), asia-Oman(228), asia-Pakistan(229), asia-Palestine(230), asia-Philippines(231), asia-Qatar(232), asia-Russia-Moscow-01Kaliningrad(233), asia-Russia-Moscow00WestRussia(234), asia-Russia-Moscow01CaspianSea(235), asia-Russia-Moscow02Urals(236), asia-Russia-Moscow03WestSiberia(237), asia-Russia-Moscow03Novosibirsk(238), asia-Russia-Moscow04YeniseiRiver(239), asia-Russia-Moscow05LakeBaikal(240), asia-Russia-Moscow06LenaRiver(241), asia-Russia-Moscow07AmurRiver(242), asia-Russia-Moscow07SakhalinIsland(243), asia-Russia-Moscow08Magadan(244), asia-Russia-Moscow09Kamchatka(245), asia-Russia-Moscow10BeringSea(246), asia-SaudiArabia(247), asia-Singapore(248), asia-SriLanka(249), asia-Syria(250), asia-Taiwan(251), asia-Tajikistan(252), asia-Thailand(253), asia-Turkmenistan(254), asia-UnitedArabEmirates(255), asia-Uzbekistan-WestUzbekistan(256), asia-Uzbekistan-EastUzbekistan(257), asia-Vietnam(258), asia-Yemen(259), atlanticOcean-Bermuda(260), atlanticOcean-CapeVerde(261), atlanticOcean-FaeroeIslands(262), atlanticOcean-FalklandIslands(263), atlanticOcean-Iceland(264), atlanticOcean-Portugal-Mainland(265), atlanticOcean-Portugal-MadeiraIslands(266), atlanticOcean-Portugal-Azores(267), atlanticOcean-SouthGeorgia-SouthSandwichIslands(268), atlanticOcean-Spain-Mainland(269), atlanticOcean-Spain-CeutaMelilla(270), atlanticOcean-Spain-CanaryIslands(271), atlanticOcean-StHelena(272), atlanticOcean-Svalbard-JanMayen(273), australia-LordHoweIsland(274), australia-Tasmania(275), australia-Victoria(276), australia-NewSouthWales-MostLocations(277), australia-NewSouthWales-Yancowinna(278), australia-Queensland-MostLocations(279), australia-Queensland-HolidayIslands(280), australia-SouthAustralia(281), australia-NorthernTerritory(282), australia-WesternAustralia(283), europe-Albania(284), europe-Andorra(285), europe-Austria(286), europe-Belarus(287), europe-Belgium(288), europe-BosniaHerzegovina(289), europe-Britain-UKGreatBritain(290), europe-Britain-UKNorthernIreland(291), europe-Bulgaria(292), europe-Croatia(293), europe-CzechRepublic(294), europe-Denmark(295), europe-Estonia(296), europe-Finland(297), europe-France(298), europe-Germany(299), europe-Gibraltar(300), europe-Greece(301), europe-Hungary(302), europe-Ireland(303), europe-Italy(304), europe-Latvia(305), europe-Liechtenstein(306), europe-Lithuania(307), europe-Luxembourg(308), europe-Macedonia(309), europe-Malta(310), europe-Moldova(311), europe-Monaco(312), europe-Netherlands(313), europe-Norway(314), europe-Poland(315), europe-Portugal-Mainland(316), europe-Portugal-MadeiraIslands(317), europe-Portugal-Azores(318), europe-Romania(319), europe-Russia-Moscow-01Kaliningrad(320), europe-Russia-Moscow00WestRussia(321), europe-Russia-Moscow01CaspianSea(322), europe-Russia-Moscow02Urals(323), europe-Russia-Moscow03WestSiberia(324), europe-Russia-Moscow03Novosibirsk(325), europe-Russia-Moscow04YeniseiRiver(326), europe-Russia-Moscow05LakeBaikal(327), europe-Russia-Moscow06LenaRiver(328), europe-Russia-Moscow07AmurRiver(329), europe-Russia-Moscow07SakhalinIsland(330), europe-Russia-Moscow08Magadan(331), europe-Russia-Moscow09Kamchatka(332), europe-Russia-Moscow10BeringSea(333), europe-SanMarino(334), europe-Slovakia(335), europe-Slovenia(336), europe-Spain-Mainland(337), europe-Spain-CeutaAndMelilla(338), europe-Spain-CanaryIslands(339), europe-Sweden(340), europe-Switzerland(341), europe-Turkey(342), europe-Ukraine-MostLocations(343), europe-Ukraine-Ruthenia(344), europe-Ukraine-Zaporozhye-ELugansk(345), europe-Ukraine-CentralCrimea(346), europe-VaticanCity(347), europe-Yugoslavia(348), indianOcean-BritishIndianOceanTerritory(349), indianOcean-ChristmasIsland(350), indianOcean-CocosOrKeelingIslands(351), indianOcean-Comoros(352), indianOcean-FrenchSouthernAndAntarcticLands(353), indianOcean-Madagascar(354), indianOcean-Maldives(355), indianOcean-Mauritius(356), indianOcean-Mayotte(357), indianOcean-Reunion(358), indianOcean-Seychelles(359), pacificOcean-Chile-MostLocations(360), pacificOcean-Chile-EasterIslandSalayGomez(361), pacificOcean-CookIslands(362), pacificOcean-Ecuador(363), pacificOcean-Fiji(364), pacificOcean-FrenchPolynesia-SocietyIslands(365), pacificOcean-FrenchPolynesia-MarquesasIslands(366), pacificOcean-FrenchPolynesia-GambierIslands(367), pacificOcean-Guam(368), pacificOcean-Kiribati-GilbertIslands(369), pacificOcean-Kiribati-PhoenixIslands(370), pacificOcean-Kiribati-LineIslands(371), pacificOcean-MarshallIslands-MostLocations(372), pacificOcean-MarshallIslands-Kwajalein(373), pacificOcean-Micronesia-Yap(374), pacificOcean-Micronesia-TrukOrChuuk(375), pacificOcean-Micronesia-PonapeOrPohnpei(376), pacificOcean-Micronesia-Kosrae(377), pacificOcean-Nauru(378), pacificOcean-NewCaledonia(379), pacificOcean-NewZealand-MostLocations(380), pacificOcean-NewZealand-ChathamIslands(381), pacificOcean-Niue(382), pacificOcean-NorfolkIsland(383), pacificOcean-NorthernMarianaIslands(384), pacificOcean-Palau(385), pacificOcean-PapuaNewGuinea(386), pacificOcean-Pitcairn(387), pacificOcean-SamoaAmerican(388), pacificOcean-SamoaWestern(389), pacificOcean-SolomonIslands(390), pacificOcean-Tokelau(391), pacificOcean-Tonga(392), pacificOcean-Tuvalu(393), pacificOceanUSA-EastTime(394), pacificOceanUSA-EastTime-MichiganMostLocations(395), pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396), pacificOceanUSA-EastTime-KentuckyWayneCounty(397), pacificOceanUSA-EastStdTime-IndianaMostLocations(398), pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399), pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400), pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401), pacificOceanUSA-CentTime(402), pacificOceanUSA-CentTime-MichiganWisconsinborder(403), pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404), pacificOceanUSA-MountTime(405), pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406), pacificOceanUSA-MountTime-Navajo(407), pacificOceanUSA-MountStdTime-Arizona(408), pacificOceanUSA-PacificTime(409), pacificOceanUSA-AlaskaTime(410), pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411), pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412), pacificOceanUSA-AlaskaTime-WestAlaska(413), pacificOceanUSA-AleutianIslands(414), pacificOceanUSA-Hawaii(415), pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416), pacificOcean-USMinorOutlyingIslands-MidwayIslands(417), pacificOcean-USMinorOutlyingIslands-WakeIsland(418), pacificOcean-Vanuatu(419), pacificOcean-WallisAndFutuna(420)  

agNewDaylightSavings 1.3.6.1.4.1.1872.2.5.1.1.1.56
The daylight savings location.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), africa-Algeria(1), africa-Angola(2), africa-Benin(3), africa-Botswana(4), africa-Burkina-Faso(5), africa-Burundi(6), africa-Cameroon(7), africa-Central-African-Rep(8), africa-Chad(9), africa-Congo-WestDemRepCongo(10), africa-Congo-EastDemRepCongo(11), africa-Congo-Rep(12), africa-Cote-dIvoire(13), africa-Djibouti(14), africa-Egypt(15), africa-Equatorial-Guinea(16), africa-Eritrea(17), africa-Ethiopia(18), africa-Gabon(19), africa-Gambia(20), africa-Ghana(21), africa-Guinea(22), africa-Guinea-Bissau(23), africa-Kenya(24), africa-Lesotho(25), africa-Liberia(26), africa-Libya(27), africa-Malawi(28), africa-Mali-SouthWestMali(29), africa-Mali-NorthEastMali(30), africa-Mauritania(31), africa-Morocco(32), africa-Mozambique(33), africa-Namibia(34), africa-Niger(35), africa-Nigeria(36), africa-Rwanda(37), africa-SaoTome-And-Principe(38), africa-Senegal(39), africa-SierraLeone(40), africa-Somalia(41), africa-SouthAfrica(42), africa-Spain-Mainland(43), africa-Spain-CeutaMelilla(44), africa-Spain-CanaryIslands(45), africa-Sudan(46), africa-Swaziland(47), africa-Tanzania(48), africa-Togo(49), africa-Tunisia(50), africa-Uganda(51), africa-Western-Sahara(52), africa-Zambia(53), africa-Zimbabwe(54), americas-Anguilla(55), americas-Antigua-Barbuda(56), americas-Argentina-EArgentina(57), americas-Argentina-MostLocations(58), americas-Argentina-Jujuy(59), americas-Argentina-Catamarca(60), americas-Argentina-Mendoza(61), americas-Aruba(62), americas-Bahamas(63), americas-Barbados(64), americas-Belize(65), americas-Bolivia(66), americas-Brazil-AtlanticIslands(67), americas-Brazil-AmapaEPara(68), americas-Brazil-NEBrazil(69), americas-Brazil-Pernambuco(70), americas-Brazil-Tocantins(71), americas-Brazil-AlagoasSergipe(72), americas-Brazil-SSEBrazil(73), americas-Brazil-MatoGrossoDoSul(74), americas-Brazil-WParaRondonia(75), americas-Brazil-Roraima(76), americas-Brazil-EAmazonas(77), americas-Brazil-WAmazonas(78), americas-Brazil-Acre(79), americas-Canada-NewfoundlandIsland(80), americas-Canada-AtlanTime-NovaScotia(81), americas-Canada-AtlanTime-ELabrador(82), americas-Canada-EastTime-OntarioMostlocation(83), americas-Canada-EastTime-ThunderBay(84), americas-Canada-EastStdTime-PangnirtungNunavut(85), americas-Canada-EastStdTime-EastNunavut(86), americas-Canada-EastStdTime-CenNunavut(87), americas-Canada-CenTime-ManitobaWestOntario(88), americas-Canada-CenTime-RainyRiver(89), americas-Canada-CenTime-WestNunavut(90), americas-Canada-CenStdTime-SaskatchewanMostlocation(91), americas-Canada-CenStdTime-SaskatchewanMidwest(92), americas-Canada-MountTime-AlbertaEastBritishColumbia(93), americas-Canada-MountTime-CentralNorthwestTerritories(94), americas-Canada-MountTime-WestNorthwestTerritories(95), americas-Canada-MountStdTime-DawsonCrkStJohnBritColumbia(96), americas-Canada-PacificTime-WestBritishColumbia(97), americas-Canada-PacificTime-SouthYukon(98), americas-Canada-PacificTime-NorthYukon(99), americas-CaymanIslands(100), americas-Chile-MostLocation(101), americas-Chile-EasterIsland(102), americas-Colombia(103), americas-CostaRica(104), americas-Cuba(105), americas-Dominica(106), americas-DominicanRepublic(107), americas-Ecuador(108), americas-ElSalvado(109), americas-FrenchGuiana(110), americas-Greenland-MostLocation(111), americas-Greenland-EastCoastNorthScoresbysund(112), americas-Greenland-ScoresbysundIttoqqortoormiit(113), americas-Greenland-ThulePituffik(114), americas-Grenada(115), americas-Guadeloupe(116), americas-Guatemala(117), americas-Guyana(118), americas-Haiti(119), americas-Honduras(120), americas-Jamaica(121), americas-Martinique(122), americas-Mexico-CentTime-Mostlocations(123), americas-Mexico-CentTime-QuintanaRoo(124), americas-Mexico-CentTime-CampecheYucatan(125), americas-Mexico-CTime-CoahuilaDurangoNuevoLeonTamaulipas(126), americas-Mexico-MountTime-SBajaNayaritSinaloa(127), americas-Mexico-MountTime-Chihuahua(128), americas-Mexico-MountStdTime-Sonora(129), americas-Mexico-PacificTime(130), americas-Montserrat(131), americas-NetherlandsAntilles(132), americas-Nicaragua(133), americas-Panama(134), americas-Paraguay(135), americas-Peru(136), americas-PuertoRico(137), americas-StKittsAndNevis(138), americas-StLucia(139), americas-StPierreAndMiquelon(140), americas-StVincent(141), americas-Suriname(142), americas-TrinidadAndTobago(143), americas-TurksAndCaicosIs(144), americas-USA-EastTime(145), americas-USA-EastTime-MichiganMostLocation(146), americas-USA-EastTime-KentuckyLouisvilleArea(147), americas-USA-EastTime-KentuckyWayneCounty(148), americas-USA-EastStdTime-IndianaMostLocations(149), americas-USA-EastStdTime-IndianaCrawfordCounty(150), americas-USA-EastStdTime-IndianaStarkeCounty(151), americas-USA-EastStdTime-IndianaSwitzerlandCounty(152), americas-USA-CentTime(153), americas-USA-CentTime-MichiganWisconsinborder(154), americas-USA-CentTime-NorthDakotaOliverCounty(155), americas-USA-MountTime(156), americas-USA-MountTime-SouthIdahoAndEastOregon(157), americas-USA-MountTime-Navajo(158), americas-USA-MountStdTime-Arizona(159), americas-USA-PacificTime(160), americas-USA-AlaskaTime(161), americas-USA-AlaskaTime-AlaskaPanhandle(162), americas-USA-AlaskaTime-AlaskaPanhandleNeck(163), americas-USA-AlaskaTime-WestAlaska(164), americas-USA-AleutianIslands(165), americas-USA-Hawaii(166), americas-Uruguay(167), americas-Venezuela(168), americas-VirginIslands-UK(169), americas-VirginIslands-US(170), antarctica-McMurdoStationRossIsland(171), antarctica-Amundsen-ScottStationSouthPole(172), antarctica-PalmerStationAnversIsland(173), antarctica-MawsonStationHolmeBay(174), antarctica-DavisStationVestfoldHills(175), antarctica-CaseyStationBaileyPeninsula(176), antarctica-VostokStationSMagneticPole(177), antarctica-Dumont-dUrvilleBaseTerreAdelie(178), antarctica-SyowaStationEOngulI(179), arcticOcean-Svalbard(180), arcticOcean-JanMayen(181), asia-Afghanistan(182), asia-Armenia(183), asia-Azerbaijan(184), asia-Bahrain(185), asia-Bangladesh(186), asia-Bhutan(187), asia-Brunei(188), asia-Cambodia(189), asia-China-EastChinaBeijingGuangdongShanghai(190), asia-China-Heilongjiang(191), asia-China-CentralChinaGansuGuizhouSichuanYunnan(192), asia-China-TibetmostofXinjiangUyghur(193), asia-China-SouthwestXinjiangUyghur(194), asia-Cyprus(195), asia-EastTimor(196), asia-Georgia(197), asia-HongKong(198), asia-India(199), asia-Indonesia-JavaAndSumatra(200), asia-Indonesia-WestCentralBorneo(201), asia-Indonesia-EstSthBorneoCelebsBaliNusaTengaraWstTimor(202), asia-Indonesia-IrianJayaAndMoluccas(203), asia-Iran(204), asia-Iraq(205), asia-Israel(206), asia-Japan(207), asia-Jordan(208), asia-Kazakhstan-MostLocations(209), asia-Kazakhstan-QyzylordaKyzylorda(210), asia-Kazakhstan-Aqtobe(211), asia-Kazakhstan-AtyrauMangghystau(212), asia-Kazakhstan-WestKazakhstan(213), asia-Korea-North(214), asia-Korea-South(215), asia-Kuwait(216), asia-Kyrgyzstan(217), asia-Laos(218), asia-Lebanon(219), asia-Macau(220), asia-Malaysia-PeninsularMalaysia(221), asia-Malaysia-SabahSarawak(222), asia-Mongolia-MostLocations(223), asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224), asia-Mongolia-DornodSukhbaatar(225), asia-Myanmar(226), asia-Nepal(227), asia-Oman(228), asia-Pakistan(229), asia-Palestine(230), asia-Philippines(231), asia-Qatar(232), asia-Russia-Moscow-01Kaliningrad(233), asia-Russia-Moscow00WestRussia(234), asia-Russia-Moscow01CaspianSea(235), asia-Russia-Moscow02Urals(236), asia-Russia-Moscow03WestSiberia(237), asia-Russia-Moscow03Novosibirsk(238), asia-Russia-Moscow04YeniseiRiver(239), asia-Russia-Moscow05LakeBaikal(240), asia-Russia-Moscow06LenaRiver(241), asia-Russia-Moscow07AmurRiver(242), asia-Russia-Moscow07SakhalinIsland(243), asia-Russia-Moscow08Magadan(244), asia-Russia-Moscow09Kamchatka(245), asia-Russia-Moscow10BeringSea(246), asia-SaudiArabia(247), asia-Singapore(248), asia-SriLanka(249), asia-Syria(250), asia-Taiwan(251), asia-Tajikistan(252), asia-Thailand(253), asia-Turkmenistan(254), asia-UnitedArabEmirates(255), asia-Uzbekistan-WestUzbekistan(256), asia-Uzbekistan-EastUzbekistan(257), asia-Vietnam(258), asia-Yemen(259), atlanticOcean-Bermuda(260), atlanticOcean-CapeVerde(261), atlanticOcean-FaeroeIslands(262), atlanticOcean-FalklandIslands(263), atlanticOcean-Iceland(264), atlanticOcean-Portugal-Mainland(265), atlanticOcean-Portugal-MadeiraIslands(266), atlanticOcean-Portugal-Azores(267), atlanticOcean-SouthGeorgia-SouthSandwichIslands(268), atlanticOcean-Spain-Mainland(269), atlanticOcean-Spain-CeutaMelilla(270), atlanticOcean-Spain-CanaryIslands(271), atlanticOcean-StHelena(272), atlanticOcean-Svalbard-JanMayen(273), australia-LordHoweIsland(274), australia-Tasmania(275), australia-Victoria(276), australia-NewSouthWales-MostLocations(277), australia-NewSouthWales-Yancowinna(278), australia-Queensland-MostLocations(279), australia-Queensland-HolidayIslands(280), australia-SouthAustralia(281), australia-NorthernTerritory(282), australia-WesternAustralia(283), europe-Albania(284), europe-Andorra(285), europe-Austria(286), europe-Belarus(287), europe-Belgium(288), europe-BosniaHerzegovina(289), europe-Britain-UKGreatBritain(290), europe-Britain-UKNorthernIreland(291), europe-Bulgaria(292), europe-Croatia(293), europe-CzechRepublic(294), europe-Denmark(295), europe-Estonia(296), europe-Finland(297), europe-France(298), europe-Germany(299), europe-Gibraltar(300), europe-Greece(301), europe-Hungary(302), europe-Ireland(303), europe-Italy(304), europe-Latvia(305), europe-Liechtenstein(306), europe-Lithuania(307), europe-Luxembourg(308), europe-Macedonia(309), europe-Malta(310), europe-Moldova(311), europe-Monaco(312), europe-Netherlands(313), europe-Norway(314), europe-Poland(315), europe-Portugal-Mainland(316), europe-Portugal-MadeiraIslands(317), europe-Portugal-Azores(318), europe-Romania(319), europe-Russia-Moscow-01Kaliningrad(320), europe-Russia-Moscow00WestRussia(321), europe-Russia-Moscow01CaspianSea(322), europe-Russia-Moscow02Urals(323), europe-Russia-Moscow03WestSiberia(324), europe-Russia-Moscow03Novosibirsk(325), europe-Russia-Moscow04YeniseiRiver(326), europe-Russia-Moscow05LakeBaikal(327), europe-Russia-Moscow06LenaRiver(328), europe-Russia-Moscow07AmurRiver(329), europe-Russia-Moscow07SakhalinIsland(330), europe-Russia-Moscow08Magadan(331), europe-Russia-Moscow09Kamchatka(332), europe-Russia-Moscow10BeringSea(333), europe-SanMarino(334), europe-Slovakia(335), europe-Slovenia(336), europe-Spain-Mainland(337), europe-Spain-CeutaAndMelilla(338), europe-Spain-CanaryIslands(339), europe-Sweden(340), europe-Switzerland(341), europe-Turkey(342), europe-Ukraine-MostLocations(343), europe-Ukraine-Ruthenia(344), europe-Ukraine-Zaporozhye-ELugansk(345), europe-Ukraine-CentralCrimea(346), europe-VaticanCity(347), europe-Yugoslavia(348), indianOcean-BritishIndianOceanTerritory(349), indianOcean-ChristmasIsland(350), indianOcean-CocosOrKeelingIslands(351), indianOcean-Comoros(352), indianOcean-FrenchSouthernAndAntarcticLands(353), indianOcean-Madagascar(354), indianOcean-Maldives(355), indianOcean-Mauritius(356), indianOcean-Mayotte(357), indianOcean-Reunion(358), indianOcean-Seychelles(359), pacificOcean-Chile-MostLocations(360), pacificOcean-Chile-EasterIslandSalayGomez(361), pacificOcean-CookIslands(362), pacificOcean-Ecuador(363), pacificOcean-Fiji(364), pacificOcean-FrenchPolynesia-SocietyIslands(365), pacificOcean-FrenchPolynesia-MarquesasIslands(366), pacificOcean-FrenchPolynesia-GambierIslands(367), pacificOcean-Guam(368), pacificOcean-Kiribati-GilbertIslands(369), pacificOcean-Kiribati-PhoenixIslands(370), pacificOcean-Kiribati-LineIslands(371), pacificOcean-MarshallIslands-MostLocations(372), pacificOcean-MarshallIslands-Kwajalein(373), pacificOcean-Micronesia-Yap(374), pacificOcean-Micronesia-TrukOrChuuk(375), pacificOcean-Micronesia-PonapeOrPohnpei(376), pacificOcean-Micronesia-Kosrae(377), pacificOcean-Nauru(378), pacificOcean-NewCaledonia(379), pacificOcean-NewZealand-MostLocations(380), pacificOcean-NewZealand-ChathamIslands(381), pacificOcean-Niue(382), pacificOcean-NorfolkIsland(383), pacificOcean-NorthernMarianaIslands(384), pacificOcean-Palau(385), pacificOcean-PapuaNewGuinea(386), pacificOcean-Pitcairn(387), pacificOcean-SamoaAmerican(388), pacificOcean-SamoaWestern(389), pacificOcean-SolomonIslands(390), pacificOcean-Tokelau(391), pacificOcean-Tonga(392), pacificOcean-Tuvalu(393), pacificOceanUSA-EastTime(394), pacificOceanUSA-EastTime-MichiganMostLocations(395), pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396), pacificOceanUSA-EastTime-KentuckyWayneCounty(397), pacificOceanUSA-EastStdTime-IndianaMostLocations(398), pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399), pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400), pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401), pacificOceanUSA-CentTime(402), pacificOceanUSA-CentTime-MichiganWisconsinborder(403), pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404), pacificOceanUSA-MountTime(405), pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406), pacificOceanUSA-MountTime-Navajo(407), pacificOceanUSA-MountStdTime-Arizona(408), pacificOceanUSA-PacificTime(409), pacificOceanUSA-AlaskaTime(410), pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411), pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412), pacificOceanUSA-AlaskaTime-WestAlaska(413), pacificOceanUSA-AleutianIslands(414), pacificOceanUSA-Hawaii(415), pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416), pacificOcean-USMinorOutlyingIslands-MidwayIslands(417), pacificOcean-USMinorOutlyingIslands-WakeIsland(418), pacificOcean-Vanuatu(419), pacificOceanWallisAndFutuna(420)  

agCurCfgIdleCLITimeout 1.3.6.1.4.1.1872.2.5.1.1.1.57
Set idle CLI sessions timeout.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..10080  

agNewCfgIdleCLITimeout 1.3.6.1.4.1.1872.2.5.1.1.1.58
Set idle CLI sessions timeout.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10080  

agCurCfgXMLCfgServerPort 1.3.6.1.4.1.1872.2.5.1.1.1.59
The TCP port number that the XML config server is listening to in the current_configuration block. If HTTPS is also enabled then the port numbers should be the same
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

agNewCfgXMLCfgServerPort 1.3.6.1.4.1.1872.2.5.1.1.1.60
The TCP port number that the XML config server is listening to in the new_configuration block. If HTTPS is also enabled then the port numbers should be the same
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

agCurCfgLoginNotice 1.3.6.1.4.1.1872.2.5.1.1.1.75
The user defined login notice.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

agNewCfgLoginNotice 1.3.6.1.4.1.1872.2.5.1.1.1.76
The user defined login notice.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

agPlatformIdentifier 1.3.6.1.4.1.1872.2.5.1.1.1.77
An administratively-assigned value that identifies managed device platform.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

agFormFactor 1.3.6.1.4.1.1872.2.5.1.1.1.78
An administratively-assigned value that identifies managed device form-factor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

agCurCfgTputInterval 1.3.6.1.4.1.1872.2.5.1.1.1.62
Set throughput interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..60  

agNewCfgTputInterval 1.3.6.1.4.1.1872.2.5.1.1.1.63
Set throughput interval.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

agCurCfgTputThreshold 1.3.6.1.4.1.1872.2.5.1.1.1.64
Set throughput threshold.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..99  

agNewCfgTputThreshold 1.3.6.1.4.1.1872.2.5.1.1.1.65
Set throughput threshold.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..99  

agCurCfgBootVAID 1.3.6.1.4.1.1872.2.5.1.1.1.67
Alteon unique VA identifier is used to set its traffic virtual MAC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

agNewCfgCfgBootVAID 1.3.6.1.4.1.1872.2.5.1.1.1.68
Alteon unique VA identifier is used to set its traffic virtual MAC. To avoid MAC collisions, it is required to set a unique identifier on each VA on a network. SET will fail if the old_vaid is same as new_vaid.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1024  

agCurCfgPrompt 1.3.6.1.4.1.1872.2.5.1.1.1.69
Enable or disable the hostname display in CLI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgPrompt 1.3.6.1.4.1.1872.2.5.1.1.1.70
Enable or disable the TCP health services.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgHCTCPServState 1.3.6.1.4.1.1872.2.5.1.1.1.73
Enable or disable the TCP health services.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgHCTCPServState 1.3.6.1.4.1.1872.2.5.1.1.1.74
Enable or disable the TCP health services.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCfgHcTcpPortNxtIdx 1.3.6.1.4.1.1872.2.5.1.1.1.79
The next free TCP port index.It returns 0 when all 10 ports are configured.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

agHcTcpPortTable 1.3.6.1.4.1.1872.2.5.1.1.1.80
OBJECT IDENTIFIER    

agCurCfgHcTcpPortTable 1.3.6.1.4.1.1872.2.5.1.1.1.80.1
The table of TCP services listen for health check in the current config block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgCurCfgHcTcpPortTableEntry

agCurCfgHcTcpPortTableEntry 1.3.6.1.4.1.1872.2.5.1.1.1.80.1.1
A row in the table of TCP services listen for health check.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgCurCfgHcTcpPortTableEntry  

agCurCfgHcTcpPortIndx 1.3.6.1.4.1.1872.2.5.1.1.1.80.1.1.1
The Health check TCP Services table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..10  

agCurCfgHcTcpPortNum 1.3.6.1.4.1.1872.2.5.1.1.1.80.1.1.2
The TCP Port number which listen for health check.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 2..65535  

agNewCfgHcTcpPortTable 1.3.6.1.4.1.1872.2.5.1.1.1.80.2
The table of TCP services listen for health check in the new config block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgNewCfgHcTcpPortTableEntry

agNewCfgHcTcpPortTableEntry 1.3.6.1.4.1.1872.2.5.1.1.1.80.2.1
A row in the table of TCP services listen for health check.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgNewCfgHcTcpPortTableEntry  

agNewCfgHcTcpPortIndx 1.3.6.1.4.1.1872.2.5.1.1.1.80.2.1.1
The Health check TCP Services table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..10  

agNewCfgHcTcpPortNum 1.3.6.1.4.1.1872.2.5.1.1.1.80.2.1.2
The TCP Port number which listen for health check.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 2..65535  

agNewCfgHcTcpPortNumDelete 1.3.6.1.4.1.1872.2.5.1.1.1.80.2.1.3
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

agImageTables 1.3.6.1.4.1.1872.2.5.1.1.1.82
OBJECT IDENTIFIER    

agImageAdcTable 1.3.6.1.4.1.1872.2.5.1.1.1.82.1
The table of ADC Software Images
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgImageAdcEntry

agImageAdcEntry 1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1
A row in the ADC Software Image table
Status: current Access: not-accessible
OBJECT-TYPE    
  AgImageAdcEntry  

agImageAdcIndex 1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.1
The ADC Software Image ID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

agImageAdcVersion 1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.2
The ADC Software Image Version
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agImageAdcDownloadTime 1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.3
The ADC Software Image Download Time
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agImageAdcAssignedVadcs 1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.4
List of vadc ids that will use this image on reboot
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

agImageAdcStatus 1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.5
The ADC Software Image status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), assigned(2), incompatible(3)  

agImageAdcAdd 1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.6
Add VADc to use this Software Image (whwre 0 is No Operation)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..28  

agImageAdcRemove 1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.7
Remove VADc from using this Software Image (whwre 0 is No Operation)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..28  

agImageAdcBmap 1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.8
Bitmap of vadc that will use this image on reboot
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

agImageAdcDefault 1.3.6.1.4.1.1872.2.5.1.1.1.82.1.1.9
Set the image as default image.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

agImageVxTable 1.3.6.1.4.1.1872.2.5.1.1.1.82.2
The table of ADC-VX Software Images
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgImageVxEntry

agImageVxEntry 1.3.6.1.4.1.1872.2.5.1.1.1.82.2.1
A row in the ADC-VX Software Image table
Status: current Access: not-accessible
OBJECT-TYPE    
  AgImageVxEntry  

agImageVxIndex 1.3.6.1.4.1.1872.2.5.1.1.1.82.2.1.1
The ADC-VX Software Image ID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

agImageVxVersion 1.3.6.1.4.1.1872.2.5.1.1.1.82.2.1.2
The ADC-VX Software Image Version
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agImageVxDownloadTime 1.3.6.1.4.1.1872.2.5.1.1.1.82.2.1.3
The ADC-VX Software Image Download Time
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agImageVxStatus 1.3.6.1.4.1.1872.2.5.1.1.1.82.2.1.4
The ADC-VX Software Image status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1)  

agImageTrasform 1.3.6.1.4.1.1872.2.5.1.1.1.83
The transformation action restarts the device to switch between ADC-VX and Standalone images. The following values should also be set for the transformation action. 1) agImageTransformID for next boot image. 2) agImageTransformBootOption for next configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

agImageTransformBootOption 1.3.6.1.4.1.1872.2.5.1.1.1.84
The configuration mode in which the transformed image should load. factoryDefault(1) - factory default, lastKnownCfg(2) - Active configuration, factoryWithMgmtPortCfg(3) - factory default with retaining current management port configuration. When read, value factoryDefault(1) is returned.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER factoryDefault(1), lastKnownCfg(2), factoryWithMgmtPortCfg(3)  

agImageTransformID 1.3.6.1.4.1.1872.2.5.1.1.1.85
The Image ID of the image to load after transform. When read, value 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

agCurCfgIdleCUAlloc 1.3.6.1.4.1.1872.2.5.1.1.1.86
limit(0) - Limit vADC to the max allowed by the assigned CUs. share(1) - Share SP's unused resources across vADCs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER limit(0), share(1)  

agNewCfgIdleCUAlloc 1.3.6.1.4.1.1872.2.5.1.1.1.87
limit(0) - Limit vADC to the max allowed by the assigned CUs. share(1) - Share SP's unused resources across vADCs.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER limit(0), share(1)  

agActiveConfigBlk 1.3.6.1.4.1.1872.2.5.1.1.1.88
The configuration block which is active rightnow.This object can have either one of these values Active Configuration, Backup configuration, Default configuration.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

agDefaultImageID 1.3.6.1.4.1.1872.2.5.1.1.1.89
The Image ID of the image to assign vADCs
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

agDefaultImageVer 1.3.6.1.4.1.1872.2.5.1.1.1.90
The default image version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agMgmtConfigForNxtReset 1.3.6.1.4.1.1872.2.5.1.1.1.91
The management port configuration option for next reset. The following values are writable: erase(1)...remove management port configuration keep(2) ...keep management port configuration
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER erase(1), keep(2)  

agActiveImageName 1.3.6.1.4.1.1872.2.5.1.1.1.92
The image name which is active rightnow.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

agCurCfgSmtpHostIPVersion 1.3.6.1.4.1.1872.2.5.1.1.1.93
IP version for SMTP host name(agNewCfgSmtpHost).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(4), ipv6(6)  

agNewCfgSmtpHostIPVersion 1.3.6.1.4.1.1872.2.5.1.1.1.94
IP version for SMTP host name(agNewCfgSmtpHost). Always, first SET the SMTP hostname and this object.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ipv4(4), ipv6(6)  

agMgmtCurCfgIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.9.75
The IPV6 address of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agMgmtNewCfgIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.9.76
The IPV6 address of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agMgmtCurCfgIpv6PrefixLen 1.3.6.1.4.1.1872.2.5.1.1.9.77
The IPV6 prefix length of the management port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

agMgmtNewCfgIpv6PrefixLen 1.3.6.1.4.1.1872.2.5.1.1.9.78
The IPV6 prefix length of the management port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..128  

agMgmtCurCfgIpv6Gateway 1.3.6.1.4.1.1872.2.5.1.1.9.79
The IPV6 Gateway of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agMgmtNewCfgIpv6Gateway 1.3.6.1.4.1.1872.2.5.1.1.9.80
The IPV6 Gateway of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agMgmtCurCfgIpv6Addr2 1.3.6.1.4.1.1872.2.5.1.1.9.81
The IPV6 address2 of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agMgmtNewCfgIpv6Addr2 1.3.6.1.4.1.1872.2.5.1.1.9.82
The IPV6 address2 of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agMgmtCurCfgIpv6PrefixLen2 1.3.6.1.4.1.1872.2.5.1.1.9.83
The IPV6 prefix length2 of the management port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

agMgmtNewCfgIpv6PrefixLen2 1.3.6.1.4.1.1872.2.5.1.1.9.84
The IPV6 prefix length2 of the management port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..128  

agMgmtCurCfgIpv6Gateway2 1.3.6.1.4.1.1872.2.5.1.1.9.85
The IPV6 Gateway2 of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agMgmtNewCfgIpv6Gateway2 1.3.6.1.4.1.1872.2.5.1.1.9.86
The IPV6 Gateway2 of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agSysPeerCurCfgTable 1.3.6.1.4.1.1872.2.5.1.1.25.1
The table of system peer sync configuration in the current Configuration Block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgSysPeerCurCfgEntry

agSysPeerCurCfgEntry 1.3.6.1.4.1.1872.2.5.1.1.25.1.1
A row in the system peer table
Status: current Access: not-accessible
OBJECT-TYPE    
  AgSysPeerCurCfgEntry  

agSysPeerCurCfgIndex 1.3.6.1.4.1.1872.2.5.1.1.25.1.1.1
The system peer number for which the IP information is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSysPeerCurCfgAddr 1.3.6.1.4.1.1872.2.5.1.1.25.1.1.2
The IPv4 address of the system peer.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agSysPeerCurCfgState 1.3.6.1.4.1.1872.2.5.1.1.25.1.1.3
The state of the system peer.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agSysPeerCurCfgVadcBmap 1.3.6.1.4.1.1872.2.5.1.1.25.1.1.4
The vAdcs added to the system peer.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

agSysPeerCurCfgAddrType 1.3.6.1.4.1.1872.2.5.1.1.25.1.1.5
The type of the IP address of the peer (IPv4 | IPv6)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(4), ipv6(6)  

agSysPeerCurCfgIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.25.1.1.6
The IPV6 address of the peer identified by the instance of agSysPeerCurCfgIndex field. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agSysPeerNewCfgTable 1.3.6.1.4.1.1872.2.5.1.1.25.2
The table of peer sync configuration in the New Configuration Block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgSysPeerNewCfgEntry

agSysPeerNewCfgEntry 1.3.6.1.4.1.1872.2.5.1.1.25.2.1
A row in the system peer table
Status: current Access: not-accessible
OBJECT-TYPE    
  AgSysPeerNewCfgEntry  

agSysPeerNewCfgIndex 1.3.6.1.4.1.1872.2.5.1.1.25.2.1.1
The system peer number for which the IP information is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSysPeerNewCfgAddr 1.3.6.1.4.1.1872.2.5.1.1.25.2.1.2
The IPv4 address of the system peer.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agSysPeerNewCfgState 1.3.6.1.4.1.1872.2.5.1.1.25.2.1.3
The state of the system peer.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agSysPeerNewCfgVadcBmap 1.3.6.1.4.1.1872.2.5.1.1.25.2.1.4
The vAdcs that belongs to system peer.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

agSysPeerNewCfgDelete 1.3.6.1.4.1.1872.2.5.1.1.25.2.1.5
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

agSysPeerNewCfgVadcAdd 1.3.6.1.4.1.1872.2.5.1.1.25.2.1.6
Add VADc to the system peer
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..28  

agSysPeerNewCfgVadcRemove 1.3.6.1.4.1.1872.2.5.1.1.25.2.1.7
Remove VADc from the system peer
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..28  

agSysPeerNewCfgAddrType 1.3.6.1.4.1.1872.2.5.1.1.25.2.1.8
The type of the IP address of the peer (IPv4 | IPv6)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ipv4(4), ipv6(6)  

agSysPeerNewCfgIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.25.2.1.9
The IPV6 address of the peer identified by the instance of agSysPeerNewCfgIndex field. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agCurCfgSyslogHost 1.3.6.1.4.1.1872.2.5.1.1.5.1
The syslog host IP address, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agNewCfgSyslogHost 1.3.6.1.4.1.1872.2.5.1.1.5.2
The syslog host IP address, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agCurCfgSyslog2Host 1.3.6.1.4.1.1872.2.5.1.1.5.3
The second syslog host IP address, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agNewCfgSyslog2Host 1.3.6.1.4.1.1872.2.5.1.1.5.4
The second syslog host IP address, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agCurCfgSyslogFac 1.3.6.1.4.1.1872.2.5.1.1.5.5
The facility of syslog1 host in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8)  

agNewCfgSyslogFac 1.3.6.1.4.1.1872.2.5.1.1.5.6
The facility of syslog1 host in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8)  

agCurCfgSyslog2Fac 1.3.6.1.4.1.1872.2.5.1.1.5.7
The facility of syslog2 host in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8)  

agNewCfgSyslog2Fac 1.3.6.1.4.1.1872.2.5.1.1.5.8
The facility of syslog2 host in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8)  

agCurCfgSyslogSev 1.3.6.1.4.1.1872.2.5.1.1.5.13
The severity of syslog1 host in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8)  

agNewCfgSyslogSev 1.3.6.1.4.1.1872.2.5.1.1.5.14
The severity of syslog1 host in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8)  

agCurCfgSyslog2Sev 1.3.6.1.4.1.1872.2.5.1.1.5.15
The severity of syslog2 host in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8)  

agNewCfgSyslog2Sev 1.3.6.1.4.1.1872.2.5.1.1.5.16
The severity of syslog2 host in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8)  

agClrSyslogMsgs 1.3.6.1.4.1.1872.2.5.1.1.5.9
Clears all current Syslog messages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

agSyslogMsgTableMaxSize 1.3.6.1.4.1.1872.2.5.1.1.5.10
The maximum number of rows in the syslog message table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSyslogMsgTable 1.3.6.1.4.1.1872.2.5.1.1.5.11
The table of syslog messages.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgSyslogMsgTableEntry

agCurCfgSyslog3Host 1.3.6.1.4.1.1872.2.5.1.1.5.17
The third syslog host IP address, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agNewCfgSyslog3Host 1.3.6.1.4.1.1872.2.5.1.1.5.18
The third syslog host IP address, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agCurCfgSyslog4Host 1.3.6.1.4.1.1872.2.5.1.1.5.19
The fourth syslog host IP address, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agNewCfgSyslog4Host 1.3.6.1.4.1.1872.2.5.1.1.5.20
The fourth syslog host IP address, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agCurCfgSyslog5Host 1.3.6.1.4.1.1872.2.5.1.1.5.21
The fifth syslog host IP address, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agNewCfgSyslog5Host 1.3.6.1.4.1.1872.2.5.1.1.5.22
The fifth syslog host IP address, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agCurCfgSyslog3Fac 1.3.6.1.4.1.1872.2.5.1.1.5.23
The facility of syslog3 host in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8)  

agNewCfgSyslog3Fac 1.3.6.1.4.1.1872.2.5.1.1.5.24
The facility of syslog3 host in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8)  

agCurCfgSyslog4Fac 1.3.6.1.4.1.1872.2.5.1.1.5.25
The facility of syslog4 host in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8)  

agNewCfgSyslog4Fac 1.3.6.1.4.1.1872.2.5.1.1.5.26
The facility of syslog4 host in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8)  

agCurCfgSyslog5Fac 1.3.6.1.4.1.1872.2.5.1.1.5.27
The facility of syslog5 host in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8)  

agNewCfgSyslog5Fac 1.3.6.1.4.1.1872.2.5.1.1.5.28
The facility of syslog5 host in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8)  

agCurCfgSyslog3Sev 1.3.6.1.4.1.1872.2.5.1.1.5.29
The severity of syslog3 host in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8)  

agNewCfgSyslog3Sev 1.3.6.1.4.1.1872.2.5.1.1.5.30
The severity of syslog3 host in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8)  

agCurCfgSyslog4Sev 1.3.6.1.4.1.1872.2.5.1.1.5.31
The severity of syslog4 host in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8)  

agNewCfgSyslog4Sev 1.3.6.1.4.1.1872.2.5.1.1.5.32
The severity of syslog4 host in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8)  

agCurCfgSyslog5Sev 1.3.6.1.4.1.1872.2.5.1.1.5.33
The severity of syslog5 host in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8)  

agNewCfgSyslog5Sev 1.3.6.1.4.1.1872.2.5.1.1.5.34
The severity of syslog5 host in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8)  

agCurCfgAuditTrail 1.3.6.1.4.1.1872.2.5.1.1.5.35
Enable or disable Configuration Audit. Enable will log configuration changes in brief alongwith the user identity.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgAuditTrail 1.3.6.1.4.1.1872.2.5.1.1.5.36
Enable or disable Configuration Audit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogHostv6 1.3.6.1.4.1.1872.2.5.1.1.5.37
The syslog host IPv6 address, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agNewCfgSyslogHostv6 1.3.6.1.4.1.1872.2.5.1.1.5.38
The syslog host IPv6 address, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agCurCfgSyslog2Hostv6 1.3.6.1.4.1.1872.2.5.1.1.5.39
The second syslog host IPv6 address, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agNewCfgSyslog2Hostv6 1.3.6.1.4.1.1872.2.5.1.1.5.40
The second syslog host IPv6 address, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agCurCfgSyslog3Hostv6 1.3.6.1.4.1.1872.2.5.1.1.5.41
The third syslog host IPv6 address, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agNewCfgSyslog3Hostv6 1.3.6.1.4.1.1872.2.5.1.1.5.42
The third syslog host IPv6 address, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agCurCfgSyslog4Hostv6 1.3.6.1.4.1.1872.2.5.1.1.5.43
The fourth syslog host IPv6 address, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agNewCfgSyslog4Hostv6 1.3.6.1.4.1.1872.2.5.1.1.5.44
The fourth syslog host IPv6 address, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agCurCfgSyslog5Hostv6 1.3.6.1.4.1.1872.2.5.1.1.5.45
The fifth syslog host IPv6 address, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agNewCfgSyslog5Hostv6 1.3.6.1.4.1.1872.2.5.1.1.5.46
The fifth syslog host IPv6 address, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agSyslogMsgTableEntry 1.3.6.1.4.1.1872.2.5.1.1.5.11.1
A syslog message stored on the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgSyslogMsgTableEntry  

agSyslogMsgIndex 1.3.6.1.4.1.1872.2.5.1.1.5.11.1.1
The syslog message table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSyslogMessage 1.3.6.1.4.1.1872.2.5.1.1.5.11.1.2
The syslog message.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agSyslogSavedMsgTable 1.3.6.1.4.1.1872.2.5.1.1.5.47
The table of syslog messages saved in Flash.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgSyslogSavedMsgTableEntry

agSyslogSavedMsgTableEntry 1.3.6.1.4.1.1872.2.5.1.1.5.47.1
A syslog messages saved in FLASH.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgSyslogSavedMsgTableEntry  

agSyslogMsgSavedIndex 1.3.6.1.4.1.1872.2.5.1.1.5.47.1.1
The syslog Saved message table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSyslogSavedMessage 1.3.6.1.4.1.1872.2.5.1.1.5.47.1.2
The syslog messages saved in FLASH.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agLog 1.3.6.1.4.1.1872.2.5.1.1.5.12
OBJECT IDENTIFIER    

agNewCfgSyslogTrapConsole 1.3.6.1.4.1.1872.2.5.1.1.5.12.1
Enable or disable console syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapConsole 1.3.6.1.4.1.1872.2.5.1.1.5.12.2
Enable or disable console syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapSystem 1.3.6.1.4.1.1872.2.5.1.1.5.12.3
Enable or disable system level syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapSystem 1.3.6.1.4.1.1872.2.5.1.1.5.12.4
Enable or disable system level syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapMgmt 1.3.6.1.4.1.1872.2.5.1.1.5.12.5
Enable or disable management(flash, config, login) syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapMgmt 1.3.6.1.4.1.1872.2.5.1.1.5.12.6
Enable or disable management(flash, config, login) syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapCli 1.3.6.1.4.1.1872.2.5.1.1.5.12.7
Enable or disable CLI generated error syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapCli 1.3.6.1.4.1.1872.2.5.1.1.5.12.8
Enable or disable CLI generated error syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapStp 1.3.6.1.4.1.1872.2.5.1.1.5.12.9
Enable or disable spanning tree syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapStp 1.3.6.1.4.1.1872.2.5.1.1.5.12.10
Enable or disable spanning tree syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapVlan 1.3.6.1.4.1.1872.2.5.1.1.5.12.11
Enable or disable VLAN syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapVlan 1.3.6.1.4.1.1872.2.5.1.1.5.12.12
Enable or disable VLAN syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapSlb 1.3.6.1.4.1.1872.2.5.1.1.5.12.13
Enable or disable SLB syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapSlb 1.3.6.1.4.1.1872.2.5.1.1.5.12.14
Enable or disable SLB syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapGslb 1.3.6.1.4.1.1872.2.5.1.1.5.12.15
Enable or disable GSLB syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapGslb 1.3.6.1.4.1.1872.2.5.1.1.5.12.16
Enable or disable GSLB syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapFilter 1.3.6.1.4.1.1872.2.5.1.1.5.12.17
Enable or disable filter syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapFilter 1.3.6.1.4.1.1872.2.5.1.1.5.12.18
Enable or disable filter syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapSsh 1.3.6.1.4.1.1872.2.5.1.1.5.12.19
Enable or disable SSH, RADIUS syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapSsh 1.3.6.1.4.1.1872.2.5.1.1.5.12.20
Enable or disable SSH, RADIUS syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapVrrp 1.3.6.1.4.1.1872.2.5.1.1.5.12.21
Enable or disable VRRP syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapVrrp 1.3.6.1.4.1.1872.2.5.1.1.5.12.22
Enable or disable VRRP syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapBgp 1.3.6.1.4.1.1872.2.5.1.1.5.12.23
Enable or disable BGP syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapBgp 1.3.6.1.4.1.1872.2.5.1.1.5.12.24
Enable or disable BGP syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapNtp 1.3.6.1.4.1.1872.2.5.1.1.5.12.25
Enable or disable NTP syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapNtp 1.3.6.1.4.1.1872.2.5.1.1.5.12.26
Enable or disable NTP syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapIp 1.3.6.1.4.1.1872.2.5.1.1.5.12.31
Enable or disable IP related syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapIp 1.3.6.1.4.1.1872.2.5.1.1.5.12.32
Enable or disable IP related syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapWeb 1.3.6.1.4.1.1872.2.5.1.1.5.12.35
Enable or disable WEBUI related syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapWeb 1.3.6.1.4.1.1872.2.5.1.1.5.12.36
Enable or disable WEBUI related syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapSynAtk 1.3.6.1.4.1.1872.2.5.1.1.5.12.37
Enable or disable SYN attack detection related syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapSynAtk 1.3.6.1.4.1.1872.2.5.1.1.5.12.38
Enable or disable SYN attack detection related syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapTcpLim 1.3.6.1.4.1.1872.2.5.1.1.5.12.39
Enable or disable TCP rate limiting related syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapTcpLim 1.3.6.1.4.1.1872.2.5.1.1.5.12.40
Enable or disable TCP rate limiting related syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapOspf 1.3.6.1.4.1.1872.2.5.1.1.5.12.41
Enable or disable OSPF related syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapOspf 1.3.6.1.4.1.1872.2.5.1.1.5.12.42
Enable or disable OSPF related syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapSecurity 1.3.6.1.4.1.1872.2.5.1.1.5.12.43
Enable or disable Security pack related syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapSecurity 1.3.6.1.4.1.1872.2.5.1.1.5.12.44
Enable or disable Security pack related syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapRmon 1.3.6.1.4.1.1872.2.5.1.1.5.12.45
Enable or disable rmon related syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapRmon 1.3.6.1.4.1.1872.2.5.1.1.5.12.46
Enable or disable rmon related syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapSlbAtk 1.3.6.1.4.1.1872.2.5.1.1.5.12.47
Enable or disable SLB ATK related syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapSlbAtk 1.3.6.1.4.1.1872.2.5.1.1.5.12.48
Enable or disable SLB ATK related syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapIpv6 1.3.6.1.4.1.1872.2.5.1.1.5.12.49
Enable or disable IPV6 related syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapIpv6 1.3.6.1.4.1.1872.2.5.1.1.5.12.50
Enable or disable IPV6 related syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSyslogTrapAppSvc 1.3.6.1.4.1.1872.2.5.1.1.5.12.51
Enable or disable Application service related syslog and SNMP trap, in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSyslogTrapAppSvc 1.3.6.1.4.1.1872.2.5.1.1.5.12.52
Enable or disable Application service related syslog and SNMP trap, as currently configured in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agTrapHostTableMaxEnt 1.3.6.1.4.1.1872.2.5.1.1.6.1
The maximum number of rows in the trap host table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agCurCfgTrapHostTable 1.3.6.1.4.1.1872.2.5.1.1.6.2
The table of trap hosts which to send SNMP traps in the current_configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgCurCfgTrapHostEntry

agCurCfgTrapHostEntry 1.3.6.1.4.1.1872.2.5.1.1.6.2.1
A row in the trap host table in the current_configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgCurCfgTrapHostEntry  

agCurCfgTrapHostIndx 1.3.6.1.4.1.1872.2.5.1.1.6.2.1.1
The index of the row in trap host table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agCurCfgTrapHostIpAddr 1.3.6.1.4.1.1872.2.5.1.1.6.2.1.2
The IP address of a trap host.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agCurCfgTrapHostCommString 1.3.6.1.4.1.1872.2.5.1.1.6.2.1.3
The SNMP community string to use with the trap host
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

agNewCfgTrapHostTable 1.3.6.1.4.1.1872.2.5.1.1.6.3
The table of trap hosts which to send SNMP traps in the new_configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgNewCfgTrapHostEntry

agNewCfgTrapHostEntry 1.3.6.1.4.1.1872.2.5.1.1.6.3.1
A row in the trap host table in the new_configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgNewCfgTrapHostEntry  

agNewCfgTrapHostIndx 1.3.6.1.4.1.1872.2.5.1.1.6.3.1.1
The index of the row in trap host table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agNewCfgTrapHostIpAddr 1.3.6.1.4.1.1872.2.5.1.1.6.3.1.2
The IP address of a trap host.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agNewCfgTrapHostCommString 1.3.6.1.4.1.1872.2.5.1.1.6.3.1.3
The SNMP community string to use with the trap host
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

agTftpServer 1.3.6.1.4.1.1872.2.5.1.1.7.1
The TFTP server IP address or domain name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agTftpImageAdc 1.3.6.1.4.1.1872.2.5.1.1.7.19
The Image ID in which to load the new image
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

agTftpImageVx 1.3.6.1.4.1.1872.2.5.1.1.7.20
The Image ID in which to load the new VX image
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

agTftpImageAdc 1.3.6.1.4.1.1872.2.5.1.1.7.19
The Image ID in which to load the new image
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

agTftpImageVx 1.3.6.1.4.1.1872.2.5.1.1.7.20
The Image ID in which to load the new VX image
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

agTftpImage 1.3.6.1.4.1.1872.2.5.1.1.7.2
Whether the image file should be loaded in image1 or image2 in flash.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER image1(2), image2(3)  

agTftpImageFileName 1.3.6.1.4.1.1872.2.5.1.1.7.3
The image file name to be downloaded.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agTftpCfgFileName 1.3.6.1.4.1.1872.2.5.1.1.7.4
The configuration file name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agTftpDumpFileName 1.3.6.1.4.1.1872.2.5.1.1.7.5
The file name for core dump.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agTftpAction 1.3.6.1.4.1.1872.2.5.1.1.7.6
This is an action object to perform various TFTP Get or Put functions. The TFTP sever is specified in agTftpServer object. img-get(2) - Download switch image from a specified image file (agTftpImageFileName) on the TFTP server to the destinated storage (agTftpImage). cfg-get(3) - Download switch configuration from a specified file (agTftpCfgFileName) on the TFTP server. cfg-put(4) - Upload switch configuration to a specified file (agTftpCfgFileName) on the TFTP server. dump-put(5) - Download switch core dump to a specified file (agTftpDumpFileName) on the TFTP server. bkpdump-put(6)- Download switch backup core dump to a specified file (agTftpDumpFileName) on the TFTP server. tsdump-put(8) - Download switch tech support dump to a specified file (agTftpTSDumpFileName) on the TFTP server. bogon-get(9) - Download bogon config file from a specified bogon file (uses agTftpImageFileName) on the TFTP server. xml-get(14) - Import XML client certificate to a specified file (agTftpCfgFileName) on the TFTP server. put-dumps(18) - Upload all dumps, logs and configurations via FTP. other(1) is returned always when read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), img-get(2), cfg-get(3), cfg-put(4), dump-put(5), bkpdump-put(6), tsdump-put(8), bogon-get(9), xml-get(14), applog-export(15), cert-export(16), cert-import(17), put-dumps(18)  

agTftpLastActionStatus 1.3.6.1.4.1.1872.2.5.1.1.7.7
The recorded status of the previous TFTP activity.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agTftpPort 1.3.6.1.4.1.1872.2.5.1.1.7.8
Specify whether the TFTP operation should be performed over the data port or the management port.In the case of Admin context only mgmt(2) is valid.Setting with data(1) will return an error
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agTftpUserName 1.3.6.1.4.1.1872.2.5.1.1.7.9
The username for FTP server or blank for TFTP server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agTftpPassword 1.3.6.1.4.1.1872.2.5.1.1.7.10
The password for FTP server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agTftpTSDumpFileName 1.3.6.1.4.1.1872.2.5.1.1.7.11
The file name for TS dump.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agTftpVersionPass 1.3.6.1.4.1.1872.2.5.1.1.7.14
The password for upgraded version.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..8)  

agTftpMode 1.3.6.1.4.1.1872.2.5.1.1.7.15
Wheather the mode of operation should be TFTP or FTP or SCP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tftp(1), ftp(2), scp(3)  

agTftpConfigOption 1.3.6.1.4.1.1872.2.5.1.1.7.16
Wheather the put or get configuration option should be all or global or vADC configurations.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(1), global(2), vADC(3), pvadc(4)  

agTftpConfigOptionvADC 1.3.6.1.4.1.1872.2.5.1.1.7.17
The vADC's indexes for put or get vADC configuration option. It should be string all or separated with comma(,) or hypen(-). Example: all 2,5,28 3-7
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

agTftpConfigTypevADC 1.3.6.1.4.1.1872.2.5.1.1.7.18
The vADC's type for put or get vADC configuration option.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(1), vadmin(2)  

agTftpSSLCertType 1.3.6.1.4.1.1872.2.5.1.1.7.21
The type of certificate component to import/export.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER key(1), srvrcert(2), cert-key(3), request(4), intermca(5), trustca(6)  

agTftpSSLCertId 1.3.6.1.4.1.1872.2.5.1.1.7.22
The type of certificate component to import/export.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agTftpSSLCertKeyPassphrase 1.3.6.1.4.1.1872.2.5.1.1.7.23
The Passphrase key which is used for key import/export.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(4..40)  

agTftpSSLCertFileName 1.3.6.1.4.1.1872.2.5.1.1.7.24
The file name for SSL Certificate\Key dump.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agTftpPrivateKeys 1.3.6.1.4.1.1872.2.5.1.1.7.25
Include Private Keys. If 'yes', requires pass phrase to be entered by the user. By Default, private keys are not included.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

agTftpPrivateKeyPassPhrase 1.3.6.1.4.1.1872.2.5.1.1.7.26
Pass phrase for including private keys in the config file.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(4..40)  

agTftpPrivateKeyConfPassPhrase 1.3.6.1.4.1.1872.2.5.1.1.7.27
Confirm private key pass phrase.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(4..40)  

agTftpAllowedNetworks 1.3.6.1.4.1.1872.2.5.1.1.7.28
Configure allowed networks. If yes, configure allowed networks by the user. By default no, allowed networks not configured.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

agCfgTftpHostIPVersion 1.3.6.1.4.1.1872.2.5.1.1.7.29
IP version for TFTP host name(agTftpServer). Always, first SET the TFTP hostname and this object.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ipv4(4), ipv6(6)  

agTftpImageType 1.3.6.1.4.1.1872.2.5.1.1.7.30
Image type to be downloaded.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(0), vx(1), adc(2), vxAdc(3)  

agTftpImageType 1.3.6.1.4.1.1872.2.5.1.1.7.30
Image type to be downloaded.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(0), vx(1), adc(2), vxAdc(3)  

agPortTableMaxEnt 1.3.6.1.4.1.1872.2.5.1.1.2.1
The maximum number of rows in the port configuration host table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agPortCurCfgTable 1.3.6.1.4.1.1872.2.5.1.1.2.2
The table of port configuration in the current_configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgPortCurCfgTableEntry

agPortCurCfgTableEntry 1.3.6.1.4.1.1872.2.5.1.1.2.2.1
A row in the port table in the current_configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgPortCurCfgTableEntry  

agPortCurCfgIndx 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.1
The index of the row in port configurations table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agPortCurCfgState 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.2
This is the state of the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agPortCurCfgVlanTag 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.3
This is VLAN tag state of the port
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tagged(2), untagged(3)  

agPortCurCfgRmon 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.5
This object is used to turn RMON on or off on the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(2), off(3)  

agPortCurCfgPVID 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.6
The default VLAN ID for the port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agPortCurCfgFastEthAutoNeg 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.7
This object is used to turn the autonegotiation on or off for fast Ethernet connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(2), off(3)  

agPortCurCfgFastEthSpeed 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.8
Selects the port speed for fast Ethernet connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER mbs10(2), mbs100(3), any(4), mbs1000(5)  

agPortCurCfgFastEthMode 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.9
This object is used to select port mode for fast Ethernet connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER full-duplex(2), half-duplex(3), full-or-half-duplex(4)  

agPortCurCfgFastEthFctl 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.10
Selects the port flow control for fast Ethernet connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER transmit(2), receive(3), both(4), none(5)  

agPortCurCfgGigEthAutoNeg 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.11
This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(2), off(3)  

agPortCurCfgGigEthFctl 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.12
This object is used to select port flow control for gigabit Ethernet connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER transmit(2), receive(3), both(4), none(5)  

agPortCurCfgPortName 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.13
The switch port name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

agPortCurCfgBwmContract 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.14
The switch port Bandwidth Management contract number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agPortCurCfgDiscardNonIPs 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.15
Enable or disable to discard all non-IP traffic on the switch port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agPortCurCfgLinkTrap 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.16
Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agPortCurCfgPreferred 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.17
This object is used to set the preferred port. Valid only on dual ports.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER copper(1), sfp(2)  

agPortCurCfgBackup 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.18
This object is used to set the backup port. Valid only on dual ports.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(2), copper(3), sfp(4)  

agPortCurCfgEgressBW 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.19
The configured egress bandwidth limit for this port. This is the maximum egress bandwidth available to this port if BWM is on.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..9)  

agPortCurCfgNonIPBwmContract 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.20
The BWM contract for non-IP traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agPortCurCfgGigEthSpeed 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.21
Selects the port speed for Gigabit Ethernet connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER mbs10(2), mbs100(3), any(4), mbs1000(5), mbs10000(6)  

agPortCurCfgGigEthMode 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.22
This object is used to select port mode for Gigabit Ethernet connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER full-duplex(2), half-duplex(3), full-or-half-duplex(4)  

agPortCurCfgPortAlias 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.24
The switch port alias.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

agPortCurCfgPortStp 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.26
This is the state of the Spanning Tree.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

agPortCurCfgPortIpFwd 1.3.6.1.4.1.1872.2.5.1.1.2.2.1.27
This is the state of the IP Forwarding.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agPortNewCfgTable 1.3.6.1.4.1.1872.2.5.1.1.2.3
The table of port configuration in the new_configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgPortNewCfgTableEntry

agPortNewCfgTableEntry 1.3.6.1.4.1.1872.2.5.1.1.2.3.1
A row in the port configuration table in the new_configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgPortNewCfgTableEntry  

agPortNewCfgIndx 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.1
The index of the row in port configurations table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agPortNewCfgState 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.2
This is the state of the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agPortNewCfgVlanTag 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.3
This is VLAN tag state of the port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tagged(2), untagged(3)  

agPortNewCfgRmon 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.5
This object is used to turn RMON on or off on the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

agPortNewCfgPVID 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.6
The default VLAN ID for the port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

agPortNewCfgFastEthAutoNeg 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.7
This object is used to turn the autonegotiation on or off for fast Ethernet connection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

agPortNewCfgFastEthSpeed 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.8
Selects the port speed for fast Ethernet connection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mbs10(2), mbs100(3), any(4), mbs1000(5)  

agPortNewCfgFastEthMode 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.9
This object is used to select port mode for fast Ethernet connection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER full-duplex(2), half-duplex(3), full-or-half-duplex(4)  

agPortNewCfgFastEthFctl 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.10
Selects the port flow control for fast Ethernet connection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER transmit(2), receive(3), both(4), none(5)  

agPortNewCfgGigEthAutoNeg 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.11
This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

agPortNewCfgGigEthFctl 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.12
This object is used to select port flow control for gigabit Ethernet connection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER transmit(2), receive(3), both(4), none(5)  

agPortNewCfgPortName 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.13
The switch port name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..63)  

agPortNewCfgBwmContract 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.14
The switch port Bandwidth Management contract number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

agPortNewCfgDiscardNonIPs 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.15
Enable or disable to discard all non-IP traffic on the switch port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agPortNewCfgLinkTrap 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.16
Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agPortNewCfgPreferred 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.17
This object is used to set the preferred port. Valid only on dual ports.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER copper(1), sfp(2)  

agPortNewCfgBackup 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.18
This object is used to set the backup port. Valid only on dual ports.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), copper(2), sfp(3)  

agPortNewCfgEgressBW 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.19
The configured egress bandwidth limit for this port. This is the maximum egress bandwidth available to this port if BWM is on.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..9)  

agPortNewCfgNonIPBwmContract 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.20
The BWM contract for non-IP traffic
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

agPortNewCfgGigEthSpeed 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.21
Selects the port speed for Gigabit Ethernet connection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mbs10(2), mbs100(3), any(4), mbs1000(5), mbs10000(6)  

agPortNewCfgGigEthMode 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.22
This object is used to select port mode for Gigabit Ethernet connection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER full-duplex(2), half-duplex(3), full-or-half-duplex(4)  

agPortNewCfgPortAlias 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.24
The switch port alias.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

agPortNewCfgPortStp 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.26
This is the state of the spanning tree.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

agPortNewCfgPortIpFwd 1.3.6.1.4.1.1872.2.5.1.1.2.3.1.27
This is the state of the IP Forwarding.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

radCurCfgPrimaryIpAddr 1.3.6.1.4.1.1872.2.5.1.1.3.1
The IP address of the Primary RADIUS server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

radNewCfgPrimaryIpAddr 1.3.6.1.4.1.1872.2.5.1.1.3.2
The IP address of the Primary RADIUS server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

radCurCfgSecondaryIpAddr 1.3.6.1.4.1.1872.2.5.1.1.3.3
The IP address of the Secondary RADIUS server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

radNewCfgSecondaryIpAddr 1.3.6.1.4.1.1872.2.5.1.1.3.4
The IP address of the Secondary RADIUS server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

radCurCfgPort 1.3.6.1.4.1.1872.2.5.1.1.3.5
Specify the RADIUS port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1500..3000  

radNewCfgPort 1.3.6.1.4.1.1872.2.5.1.1.3.6
Specify the RADIUS port number.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1500..3000  

radCurCfgTimeout 1.3.6.1.4.1.1872.2.5.1.1.3.7
The maximum number of seconds before resending authentication to RADIUS server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

radNewCfgTimeout 1.3.6.1.4.1.1872.2.5.1.1.3.8
The maximum number of seconds before resending authentication to RADIUS server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

radCurCfgRetries 1.3.6.1.4.1.1872.2.5.1.1.3.9
Number of retries to the RADIUS server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

radNewCfgRetries 1.3.6.1.4.1.1872.2.5.1.1.3.10
Number of retries to the RADIUS server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..3  

radCurCfgState 1.3.6.1.4.1.1872.2.5.1.1.3.11
Enable or disbale RADIUS authentication.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

radNewCfgState 1.3.6.1.4.1.1872.2.5.1.1.3.12
Enable or disable RADIUS authentication.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

radCurCfgAuthenString 1.3.6.1.4.1.1872.2.5.1.1.3.13
The RADIUS authentication string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

radNewCfgAuthenString 1.3.6.1.4.1.1872.2.5.1.1.3.14
The RADIUS authentication string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

radCurCfgTelnet 1.3.6.1.4.1.1872.2.5.1.1.3.15
Enable or disbale RADIUS backdoor for telnet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

radNewCfgTelnet 1.3.6.1.4.1.1872.2.5.1.1.3.16
Enable or disable RADIUS backdoor for telnet.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

radCurCfgAuthenSecondString 1.3.6.1.4.1.1872.2.5.1.1.3.17
The second RADIUS authentication string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

radNewCfgAuthenSecondString 1.3.6.1.4.1.1872.2.5.1.1.3.18
The second RADIUS authentication string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

radCurCfgSecBd 1.3.6.1.4.1.1872.2.5.1.1.3.19
Enable or disbale RADIUS secure backdoor for telnet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

radNewCfgSecBd 1.3.6.1.4.1.1872.2.5.1.1.3.20
Enable or disable RADIUS secure backdoor for telnet.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

radCurCfgPrimaryIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.3.21
The IPv6 address of the Primary RADIUS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

radNewCfgPrimaryIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.3.22
The IPv6 address of the Primary RADIUS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

radCurCfgSecondaryIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.3.23
The IPv6 address of the Secondary RADIUS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

radNewCfgSecondaryIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.3.24
The IPv6 address of the Secondary RADIUS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agCurCfgNTPServer 1.3.6.1.4.1.1872.2.5.1.1.4.1
The NTP Server Address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agNewCfgNTPServer 1.3.6.1.4.1.1872.2.5.1.1.4.2
The NTP Server Address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agCurCfgNTPResyncInterval 1.3.6.1.4.1.1872.2.5.1.1.4.3
The NTP Server resync interval in minutes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..44640  

agNewCfgNTPResyncInterval 1.3.6.1.4.1.1872.2.5.1.1.4.4
The NTP Server resync interval in minutes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..44640  

agCurCfgNTPTzoneHHMM 1.3.6.1.4.1.1872.2.5.1.1.4.5
The NTP Server timezone offset from GMT formatted as (+/-)HH:MM.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..6)  

agNewCfgNTPTzoneHHMM 1.3.6.1.4.1.1872.2.5.1.1.4.6
The NTP Server timezone offset from GMT formatted as (+/-)HH:MM. The valid range is from -12:59 to +12:59.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..6)  

agCurCfgNTPDlight 1.3.6.1.4.1.1872.2.5.1.1.4.7
Enable/disable daylight savings time.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgNTPDlight 1.3.6.1.4.1.1872.2.5.1.1.4.8
Enable/disable daylight savings time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgNTPService 1.3.6.1.4.1.1872.2.5.1.1.4.9
Enable/disable NTP Service.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgNTPService 1.3.6.1.4.1.1872.2.5.1.1.4.10
Enable/disable NTP Service.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgNTPSecServer 1.3.6.1.4.1.1872.2.5.1.1.4.11
The Secondary NTP Server Address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agNewCfgNTPSecServer 1.3.6.1.4.1.1872.2.5.1.1.4.12
The Secondary NTP Server Address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agCurCfgNTPServerIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.4.13
The IPv6 address of the Primary NTP server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agNewCfgNTPServerIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.4.14
The IPv6 address of the Primary NTP server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agCurCfgNTPSecServerIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.4.15
The IPv6 address of the Secondary NTP server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agNewCfgNTPSecServerIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.4.16
The IPv6 address of the Secondary NTP server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agApplyPending 1.3.6.1.4.1.1872.2.5.1.1.8.1
This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER applyNeeded(2), noApplyNeeded(3)  

agApplyConfig 1.3.6.1.4.1.1872.2.5.1.1.8.2
When this object is read the current state is returned. idle(2) indicates that there is no apply in progess. complete(4) indicates that the last apply operation is completed. Setting the value to apply(1), will write all the changes made since the last apply to the current configuration block. If the apply is successful this variable will return the state 'complete' else it will return 'failed'. In case of failure, to read the reason for failure use the agApplyTable. Once the operation is completed or the agApplyTable is read in case of failure, the apply buffer needs to be freed and the agApplyState should be set back to 'idle' state so others can issue the apply command via SNMP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER apply(1), idle(2), inprogress(3), complete(4), failed(5)  

agApplyTableSize 1.3.6.1.4.1.1872.2.5.1.1.8.4
The number of strings in the apply table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agApplyTable 1.3.6.1.4.1.1872.2.5.1.1.8.5
The table of URL path for URL load balancing in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgApplyTableEntry

agApplyTableEntry 1.3.6.1.4.1.1872.2.5.1.1.8.5.1
Information about an URL path for URL load balancing.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgApplyTableEntry  

agApplyIndex 1.3.6.1.4.1.1872.2.5.1.1.8.5.1.1
The table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agApplyString 1.3.6.1.4.1.1872.2.5.1.1.8.5.1.2
A string in the apply table.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

agMgmtCurCfgIpAddr 1.3.6.1.4.1.1872.2.5.1.1.9.1
The IP address of the management port.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agMgmtNewCfgIpAddr 1.3.6.1.4.1.1872.2.5.1.1.9.2
The IP address of the management port.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agMgmtCurCfgMask 1.3.6.1.4.1.1872.2.5.1.1.9.3
The subnet mask of the management port.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agMgmtNewCfgMask 1.3.6.1.4.1.1872.2.5.1.1.9.4
The subnet mask of the management port.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agMgmtCurCfgGateway 1.3.6.1.4.1.1872.2.5.1.1.9.7
The default gateway for the management port.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agMgmtNewCfgGateway 1.3.6.1.4.1.1872.2.5.1.1.9.8
The default gateway for the management port.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agMgmtCurCfgState 1.3.6.1.4.1.1872.2.5.1.1.9.9
Enable/disable management port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agMgmtNewCfgState 1.3.6.1.4.1.1872.2.5.1.1.9.10
Enable/disable management port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agMgmtCurCfgNtp 1.3.6.1.4.1.1872.2.5.1.1.9.11
Specifies NTP access is over management port or data port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtNewCfgNtp 1.3.6.1.4.1.1872.2.5.1.1.9.12
Specifies NTP access is over management port or data port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtCurCfgRadius 1.3.6.1.4.1.1872.2.5.1.1.9.13
Specifies RADIUS server access is over management port or data port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtNewCfgRadius 1.3.6.1.4.1.1872.2.5.1.1.9.14
Specifies RADIUS server access is over management port or data port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtCurCfgSmtp 1.3.6.1.4.1.1872.2.5.1.1.9.15
Specifies SMTP access is over management port or data port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtNewCfgSmtp 1.3.6.1.4.1.1872.2.5.1.1.9.16
Specifies SMTP access is over management port or data port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtCurCfgSnmp 1.3.6.1.4.1.1872.2.5.1.1.9.17
Specifies SNMP trap host access is over management port or data port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtNewCfgSnmp 1.3.6.1.4.1.1872.2.5.1.1.9.18
Specifies SNMP trap host access is over management port or data port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtCurCfgSyslog 1.3.6.1.4.1.1872.2.5.1.1.9.19
Specifies syslog host access is over management port or data port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtNewCfgSyslog 1.3.6.1.4.1.1872.2.5.1.1.9.20
Specifies syslog host access is over management port or data port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtCurCfgTftp 1.3.6.1.4.1.1872.2.5.1.1.9.21
Specifies TFTP access is over management port or data port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtNewCfgTftp 1.3.6.1.4.1.1872.2.5.1.1.9.22
Specifies TFTP access is over management port or data port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtCurCfgDns 1.3.6.1.4.1.1872.2.5.1.1.9.24
Specifies DNS access is over management port or data port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtNewCfgDns 1.3.6.1.4.1.1872.2.5.1.1.9.25
Specifies DNS access is over management port or data port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtCurCfgTacacs 1.3.6.1.4.1.1872.2.5.1.1.9.26
Specifies TACACS+ server access is over management port or data port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtNewCfgTacacs 1.3.6.1.4.1.1872.2.5.1.1.9.27
Specifies TACACS+ server access is over management port or data port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtCurCfgIntr 1.3.6.1.4.1.1872.2.5.1.1.9.28
The management port gateway health check interval (in seconds).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..60  

agMgmtNewCfgIntr 1.3.6.1.4.1.1872.2.5.1.1.9.29
The management port gateway health check interval (in seconds).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..60  

agMgmtCurCfgRetry 1.3.6.1.4.1.1872.2.5.1.1.9.30
The management port gateway retries before out of service.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..120  

agMgmtNewCfgRetry 1.3.6.1.4.1.1872.2.5.1.1.9.31
The management port gateway retries before out of service.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..120  

agMgmtCurCfgWlm 1.3.6.1.4.1.1872.2.5.1.1.9.34
Specifies WLM SASP is over management port or data port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtNewCfgWlm 1.3.6.1.4.1.1872.2.5.1.1.9.35
Specifies WLM SASP is over management port or data port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtCurCfgReport 1.3.6.1.4.1.1872.2.5.1.1.9.36
Specifies reporting server is over management port or data port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtNewCfgReport 1.3.6.1.4.1.1872.2.5.1.1.9.37
Specifies reporting server is over management port or data port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtCurCfgIpAddr2 1.3.6.1.4.1.1872.2.5.1.1.9.38
The IP address of the management port.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agMgmtNewCfgIpAddr2 1.3.6.1.4.1.1872.2.5.1.1.9.39
The IP address of the management port.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agMgmtCurCfgMask2 1.3.6.1.4.1.1872.2.5.1.1.9.40
The subnet mask of the management port.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agMgmtNewCfgMask2 1.3.6.1.4.1.1872.2.5.1.1.9.41
The subnet mask of the management port.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agMgmtCurCfgGateway2 1.3.6.1.4.1.1872.2.5.1.1.9.44
The default gateway for the management port.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agMgmtNewCfgGateway2 1.3.6.1.4.1.1872.2.5.1.1.9.45
The default gateway for the management port.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agMgmtCurCfgState2 1.3.6.1.4.1.1872.2.5.1.1.9.46
Enable/disable management port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agMgmtNewCfgState2 1.3.6.1.4.1.1872.2.5.1.1.9.47
Enable/disable management port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agMgmtCurCfgOcsp 1.3.6.1.4.1.1872.2.5.1.1.9.50
Specifies OCSP access is over management port or data port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtNewCfgOcsp 1.3.6.1.4.1.1872.2.5.1.1.9.51
Specifies OCSP access is over management port or data port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER data(1), mgmt(2)  

agMgmtPort 1.3.6.1.4.1.1872.2.5.1.1.9.23
OBJECT IDENTIFIER    

agMgmtPortCurCfgSpeed 1.3.6.1.4.1.1872.2.5.1.1.9.23.1
Set Management port link speed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER mbs10(1), mbs100(2), mbs1000(3), any(4)  

agMgmtPortNewCfgSpeed 1.3.6.1.4.1.1872.2.5.1.1.9.23.2
Set Management port link speed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mbs10(1), mbs100(2), mbs1000(3), any(4)  

agMgmtPortCurCfgMode 1.3.6.1.4.1.1872.2.5.1.1.9.23.3
Set Management port full or half duplex mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER full(1), half(2), any(3)  

agMgmtPortNewCfgMode 1.3.6.1.4.1.1872.2.5.1.1.9.23.4
Set Management port full or half duplex mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER full(1), half(2), any(3)  

agMgmtPortCurCfgAuto 1.3.6.1.4.1.1872.2.5.1.1.9.23.5
Set Management port autonegotiation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

agMgmtPortNewCfgAuto 1.3.6.1.4.1.1872.2.5.1.1.9.23.6
Set Management port autonegotiation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

agMgmtPortCurCfgSpeed2 1.3.6.1.4.1.1872.2.5.1.1.9.23.7
Set Management port2 link speed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER mbs10(1), mbs100(2), mbs1000(3), any(4)  

agMgmtPortNewCfgSpeed2 1.3.6.1.4.1.1872.2.5.1.1.9.23.8
Set Management port2 link speed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mbs10(1), mbs100(2), mbs1000(3), any(4)  

agMgmtPortCurCfgMode2 1.3.6.1.4.1.1872.2.5.1.1.9.23.9
Set Management port2 full or half duplex mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER full(1), half(2), any(3)  

agMgmtPortNewCfgMode2 1.3.6.1.4.1.1872.2.5.1.1.9.23.10
Set Management port2 full or half duplex mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER full(1), half(2), any(3)  

agMgmtPortCurCfgAuto2 1.3.6.1.4.1.1872.2.5.1.1.9.23.11
Set Management port2 autonegotiation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

agMgmtPortNewCfgAuto2 1.3.6.1.4.1.1872.2.5.1.1.9.23.12
Set Management port2 autonegotiation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

agSslprocCurCfgIpAddr 1.3.6.1.4.1.1872.2.5.1.1.10.1
The SSL cluster management IP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agSslprocNewCfgIpAddr 1.3.6.1.4.1.1872.2.5.1.1.10.2
The SSL cluster management IP.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agSslprocCurCfgPort 1.3.6.1.4.1.1872.2.5.1.1.10.3
The SSL cluster management port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

agSslprocNewCfgPort 1.3.6.1.4.1.1872.2.5.1.1.10.4
The SSL cluster management port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

agSslprocCurCfgRts 1.3.6.1.4.1.1872.2.5.1.1.10.5
Enable/disable RTS processing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agSslprocNewCfgRts 1.3.6.1.4.1.1872.2.5.1.1.10.6
Enabled/disable RTS processing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agSslprocCurCfgFilt 1.3.6.1.4.1.1872.2.5.1.1.10.7
Enable/disable filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agSslprocNewCfgFilt 1.3.6.1.4.1.1872.2.5.1.1.10.8
Enabled/disable filtering.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tacCurCfgPrimaryIpAddr 1.3.6.1.4.1.1872.2.5.1.1.11.1
The IP address of the Primary TACACS+ server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

tacNewCfgPrimaryIpAddr 1.3.6.1.4.1.1872.2.5.1.1.11.2
The IP address of the Primary TACACS+ server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

tacCurCfgSecondaryIpAddr 1.3.6.1.4.1.1872.2.5.1.1.11.3
The IP address of the Secondary TACSACS server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

tacNewCfgSecondaryIpAddr 1.3.6.1.4.1.1872.2.5.1.1.11.4
The IP address of the Secondary TACACS+ server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

tacCurCfgPort 1.3.6.1.4.1.1872.2.5.1.1.11.5
Specify the TACACS+ port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65000  

tacNewCfgPort 1.3.6.1.4.1.1872.2.5.1.1.11.6
Specify the TACACS+ port number.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65000  

tacCurCfgTimeout 1.3.6.1.4.1.1872.2.5.1.1.11.7
The maximum number of seconds before resending authentication to TACACS+ server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

tacNewCfgTimeout 1.3.6.1.4.1.1872.2.5.1.1.11.8
The maximum number of seconds before resending authentication to TACACS+ server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

tacCurCfgRetries 1.3.6.1.4.1.1872.2.5.1.1.11.9
Number of retries to the TACACS+ server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

tacNewCfgRetries 1.3.6.1.4.1.1872.2.5.1.1.11.10
Number of retries to the TACACS+ server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..3  

tacCurCfgState 1.3.6.1.4.1.1872.2.5.1.1.11.11
Enable or disbale TACACS+ authentication.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

tacNewCfgState 1.3.6.1.4.1.1872.2.5.1.1.11.12
Enable or disable TACACS+ authentication.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

tacCurCfgAuthenString 1.3.6.1.4.1.1872.2.5.1.1.11.13
The TACACS+ authentication string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

tacNewCfgAuthenString 1.3.6.1.4.1.1872.2.5.1.1.11.14
The TACACS+ authentication string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

tacCurCfgTelnet 1.3.6.1.4.1.1872.2.5.1.1.11.15
Enable or disbale TACACS+ backdoor for telnet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tacNewCfgTelnet 1.3.6.1.4.1.1872.2.5.1.1.11.16
Enable or disable TACACS+ backdoor for telnet.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tacCurCfgAuthenSecondString 1.3.6.1.4.1.1872.2.5.1.1.11.17
The second TACACS+ authentication string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

tacNewCfgAuthenSecondString 1.3.6.1.4.1.1872.2.5.1.1.11.18
The second TACACS+ authentication string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

tacCurCfgCmdAuthor 1.3.6.1.4.1.1872.2.5.1.1.11.19
Enable or disbale TACACS+ command authorization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tacNewCfgCmdAuthor 1.3.6.1.4.1.1872.2.5.1.1.11.20
Enable or disable TACACS+ command authorization.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tacCurCfgCmdLogging 1.3.6.1.4.1.1872.2.5.1.1.11.21
Enable or disbale TACACS+ command logging.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tacNewCfgCmdLogging 1.3.6.1.4.1.1872.2.5.1.1.11.22
Enable or disable TACACS+ command logging.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tacCurCfgSecBd 1.3.6.1.4.1.1872.2.5.1.1.11.23
Enable or disbale TACACS+ secure backdoor for telnet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tacNewCfgSecBd 1.3.6.1.4.1.1872.2.5.1.1.11.24
Enable or disable TACACS+ secure backdoor for telnet.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tacCurCfgCmap 1.3.6.1.4.1.1872.2.5.1.1.11.25
Enable/Disable Tacacs+ new prividlege level maping.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tacNewCfgCmap 1.3.6.1.4.1.1872.2.5.1.1.11.26
Enable/Disable Tacacs+ new prividlege level maping.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tacCurCfgPrimaryIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.11.29
The IPv6 address of the Primary TACACS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

tacNewCfgPrimaryIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.11.30
The IPv6 address of the Primary TACACS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

tacCurCfgSecondaryIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.11.31
The IPv6 address of the Secondary TACACS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

tacNewCfgSecondaryIpv6Addr 1.3.6.1.4.1.1872.2.5.1.1.11.32
The IPv6 address of the Secondary TACACS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agMgmtNetTableMaxSize 1.3.6.1.4.1.1872.2.5.1.1.12.1
The maximum number of entries in the Management Network Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agCurCfgMgmtNetTable 1.3.6.1.4.1.1872.2.5.1.1.12.2
The table for Management Network definitions in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgCurCfgMgmtNetEntry

agCurCfgMgmtNetEntry 1.3.6.1.4.1.1872.2.5.1.1.12.2.1
A row in the management network definition table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgCurCfgMgmtNetEntry  

agCurCfgMgmtNetIndex 1.3.6.1.4.1.1872.2.5.1.1.12.2.1.1
The index of the Management Network Definition table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agCurCfgMgmtNetSubnet 1.3.6.1.4.1.1872.2.5.1.1.12.2.1.2
The Management Network Address in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agCurCfgMgmtNetMask 1.3.6.1.4.1.1872.2.5.1.1.12.2.1.3
The Management Network Mask in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agCurCfgMgmtNetProtocol 1.3.6.1.4.1.1872.2.5.1.1.12.2.1.4
The Management Network Protocol access in the current_configuration block. 1 - Ssh 2 - Telnet 3 - Ssh + Telnet 4 - Http 5 - Ssh + Http 6 - Telnet + Http 7 - Ssh + Telnet + Http 8 - Https 9 - Ssh + Https 10 - Https + Telnet 11 - Ssh + Telnet + Https 12 - Http + Https 13 - Ssh + Http + Https 14 - Telnet + Http + Https 15 - Ssh + Telnet + Http + Https 16 - Snmp 17 - Ssh + Snmp 18 - Telnet + Snmp 19 - Ssh + Telnet + Snmp 20 - Http + Snmp 21 - Ssh + Http + Snmp 22 - Telnet + Http + Snmp 23 - Ssh + Telnet + Http + Snmp 24 - Https + Snmp 25 - Ssh + Https + Snmp 26 - Telnet + Https + Snmp 27 - Ssh + Telnet + Https + Snmp 28 - Http + Https + Snmp 29 - Ssh + Http + Https + Snmp 30 - Telnet + Http + Https + Snmp 31 - Ssh + Telnet + Http + Https + Snmp 32 - none
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ssh(1), telnet(2), sshTelnet(3), http(4), sshHttp(5), telnetHttp(6), sshTelnetHttp(7), https(8), sshHttps(9), httpsTelnet(10), sshTelnetHttps(11), httpHttps(12), sshHttpHttps(13), telnetHttpHttps(14), sshTelnetHttpHttps(15), snmp(16), sshSnmp(17), telnetSnmp(18), sshTelnetSnmp(19), httpSnmp(20), sshHttpSnmp(21), telnetHttpSnmp(22), sshTelnetHttpSnmp(23), httpsSnmp(24), sshHttpsSnmp(25), telnetHttpsSnmp(26), sshTelnetHttpsSnmp(27), httpHttpsSnmp(28), sshHttpHttpsSnmp(29), telnetHttpHttpsSnmp(30), sshTelnetHttpHttpsSnmp(31), none(32)  

agCurCfgMgmtNet6Table 1.3.6.1.4.1.1872.2.5.1.1.12.4
The table for Management Network definitions in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgCurCfgMgmtNet6Entry

agCurCfgMgmtNet6Entry 1.3.6.1.4.1.1872.2.5.1.1.12.4.1
A row in the management network definition table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgCurCfgMgmtNet6Entry  

agCurCfgMgmtNet6Index 1.3.6.1.4.1.1872.2.5.1.1.12.4.1.1
The index of the Management Network Definition table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agCurCfgMgmtNet6Subnet 1.3.6.1.4.1.1872.2.5.1.1.12.4.1.2
The IPV6 address of the allowed network over management port. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agCurCfgMgmtNet6Prefix 1.3.6.1.4.1.1872.2.5.1.1.12.4.1.3
The IPV6 prefix length of the allowed networks on management port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..128  

agCurCfgMgmtNet6Protocol 1.3.6.1.4.1.1872.2.5.1.1.12.4.1.4
The Management Network Protocol access in the current_configuration block. 1 - Ssh 2 - Telnet 3 - Ssh + Telnet 4 - Http 5 - Ssh + Http 6 - Telnet + Http 7 - Ssh + Telnet + Http 8 - Https 9 - Ssh + Https 10 - Https + Telnet 11 - Ssh + Telnet + Https 12 - Http + Https 13 - Ssh + Http + Https 14 - Telnet + Http + Https 15 - Ssh + Telnet + Http + Https 16 - Snmp 17 - Ssh + Snmp 18 - Telnet + Snmp 19 - Ssh + Telnet + Snmp 20 - Http + Snmp 21 - Ssh + Http + Snmp 22 - Telnet + Http + Snmp 23 - Ssh + Telnet + Http + Snmp 24 - Https + Snmp 25 - Ssh + Https + Snmp 26 - Telnet + Https + Snmp 27 - Ssh + Telnet + Https + Snmp 28 - Http + Https + Snmp 29 - Ssh + Http + Https + Snmp 30 - Telnet + Http + Https + Snmp 31 - Ssh + Telnet + Http + Https + Snmp 32 - none
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ssh(1), telnet(2), sshTelnet(3), http(4), sshHttp(5), telnetHttp(6), sshTelnetHttp(7), https(8), sshHttps(9), httpsTelnet(10), sshTelnetHttps(11), httpHttps(12), sshHttpHttps(13), telnetHttpHttps(14), sshTelnetHttpHttps(15), snmp(16), sshSnmp(17), telnetSnmp(18), sshTelnetSnmp(19), httpSnmp(20), sshHttpSnmp(21), telnetHttpSnmp(22), sshTelnetHttpSnmp(23), httpsSnmp(24), sshHttpsSnmp(25), telnetHttpsSnmp(26), sshTelnetHttpsSnmp(27), httpHttpsSnmp(28), sshHttpHttpsSnmp(29), telnetHttpHttpsSnmp(30), sshTelnetHttpHttpsSnmp(31), none(32)  

agNewCfgMgmtNetTable 1.3.6.1.4.1.1872.2.5.1.1.12.3
The table for Management Network definitions in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgNewCfgMgmtNetEntry

agNewCfgMgmtNetEntry 1.3.6.1.4.1.1872.2.5.1.1.12.3.1
A row in the management network definition table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgNewCfgMgmtNetEntry  

agNewCfgMgmtNetIndex 1.3.6.1.4.1.1872.2.5.1.1.12.3.1.1
The index of the Management Network Definition table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agNewCfgMgmtNetSubnet 1.3.6.1.4.1.1872.2.5.1.1.12.3.1.2
The Management Network Address in the new_configuration block.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agNewCfgMgmtNetMask 1.3.6.1.4.1.1872.2.5.1.1.12.3.1.3
The Management Network Mask in the new_configuration block.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agNewCfgMgmtNetDelete 1.3.6.1.4.1.1872.2.5.1.1.12.3.1.4
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

agNewCfgMgmtNetProtocol 1.3.6.1.4.1.1872.2.5.1.1.12.3.1.5
The Management Network Protocol access in the new_configuration block. 1 - Ssh 2 - Telnet 3 - Ssh + Telnet 4 - Http 5 - Ssh + Http 6 - Telnet + Http 7 - Ssh + Telnet + Http 8 - Https 9 - Ssh + Https 10 - Https + Telnet 11 - Ssh + Telnet + Https 12 - Http + Https 13 - Ssh + Http + Https 14 - Telnet + Http + Https 15 - Ssh + Telnet + Http + Https 16 - Snmp 17 - Ssh + Snmp 18 - Telnet + Snmp 19 - Ssh + Telnet + Snmp 20 - Http + Snmp 21 - Ssh + Http + Snmp 22 - Telnet + Http + Snmp 23 - Ssh + Telnet + Http + Snmp 24 - Https + Snmp 25 - Ssh + Https + Snmp 26 - Telnet + Https + Snmp 27 - Ssh + Telnet + Https + Snmp 28 - Http + Https + Snmp 29 - Ssh + Http + Https + Snmp 30 - Telnet + Http + Https + Snmp 31 - Ssh + Telnet + Http + Https + Snmp 32 - none
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ssh(1), telnet(2), sshTelnet(3), http(4), sshHttp(5), telnetHttp(6), sshTelnetHttp(7), https(8), sshHttps(9), httpsTelnet(10), sshTelnetHttps(11), httpHttps(12), sshHttpHttps(13), telnetHttpHttps(14), sshTelnetHttpHttps(15), snmp(16), sshSnmp(17), telnetSnmp(18), sshTelnetSnmp(19), httpSnmp(20), sshHttpSnmp(21), telnetHttpSnmp(22), sshTelnetHttpSnmp(23), httpsSnmp(24), sshHttpsSnmp(25), telnetHttpsSnmp(26), sshTelnetHttpsSnmp(27), httpHttpsSnmp(28), sshHttpHttpsSnmp(29), telnetHttpHttpsSnmp(30), sshTelnetHttpHttpsSnmp(31), none(32)  

agNewCfgMgmtNet6Table 1.3.6.1.4.1.1872.2.5.1.1.12.5
The table for Management Network definitions in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgNewCfgMgmtNet6Entry

agNewCfgMgmtNet6Entry 1.3.6.1.4.1.1872.2.5.1.1.12.5.1
A row in the management network definition table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgNewCfgMgmtNet6Entry  

agNewCfgMgmtNet6Index 1.3.6.1.4.1.1872.2.5.1.1.12.5.1.1
The index of the Management Network Definition table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agNewCfgMgmtNet6Subnet 1.3.6.1.4.1.1872.2.5.1.1.12.5.1.2
The IPV6 address of the allowed network over management port. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

agNewCfgMgmtNet6Prefix 1.3.6.1.4.1.1872.2.5.1.1.12.5.1.3
The IPV6 prefix length of the allowed network management port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..128  

agNewCfgMgmtNet6Protocol 1.3.6.1.4.1.1872.2.5.1.1.12.5.1.4
The Management Network Protocol access in the current_configuration block. 1 - Ssh 2 - Telnet 3 - Ssh + Telnet 4 - Http 5 - Ssh + Http 6 - Telnet + Http 7 - Ssh + Telnet + Http 8 - Https 9 - Ssh + Https 10 - Https + Telnet 11 - Ssh + Telnet + Https 12 - Http + Https 13 - Ssh + Http + Https 14 - Telnet + Http + Https 15 - Ssh + Telnet + Http + Https 16 - Snmp 17 - Ssh + Snmp 18 - Telnet + Snmp 19 - Ssh + Telnet + Snmp 20 - Http + Snmp 21 - Ssh + Http + Snmp 22 - Telnet + Http + Snmp 23 - Ssh + Telnet + Http + Snmp 24 - Https + Snmp 25 - Ssh + Https + Snmp 26 - Telnet + Https + Snmp 27 - Ssh + Telnet + Https + Snmp 28 - Http + Https + Snmp 29 - Ssh + Http + Https + Snmp 30 - Telnet + Http + Https + Snmp 31 - Ssh + Telnet + Http + Https + Snmp 32 - none
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ssh(1), telnet(2), sshTelnet(3), http(4), sshHttp(5), telnetHttp(6), sshTelnetHttp(7), https(8), sshHttps(9), httpsTelnet(10), sshTelnetHttps(11), httpHttps(12), sshHttpHttps(13), telnetHttpHttps(14), sshTelnetHttpHttps(15), snmp(16), sshSnmp(17), telnetSnmp(18), sshTelnetSnmp(19), httpSnmp(20), sshHttpSnmp(21), telnetHttpSnmp(22), sshTelnetHttpSnmp(23), httpsSnmp(24), sshHttpsSnmp(25), telnetHttpsSnmp(26), sshTelnetHttpsSnmp(27), httpHttpsSnmp(28), sshHttpHttpsSnmp(29), telnetHttpHttpsSnmp(30), sshTelnetHttpHttpsSnmp(31), none(32)  

agNewCfgMgmtNet6Delete 1.3.6.1.4.1.1872.2.5.1.1.12.5.1.5
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

agPgrpMatchTableMaxSize 1.3.6.1.4.1.1872.2.5.1.1.14.1.1
The maximum number of entries in the Pattern Match Group Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agCurCfgPgrpMatchTable 1.3.6.1.4.1.1872.2.5.1.1.14.1.2
The table for Pattern Match Group definitions in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgCurCfgPgrpMatchEntry

agCurCfgPgrpMatchEntry 1.3.6.1.4.1.1872.2.5.1.1.14.1.2.1
A row in the Pattern Match Group table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgCurCfgPgrpMatchEntry  

agCurCfgPgrpMatchIndex 1.3.6.1.4.1.1872.2.5.1.1.14.1.2.1.1
The index of the Pattern Match Group Definition table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agCurCfgPgrpName 1.3.6.1.4.1.1872.2.5.1.1.14.1.2.1.2
The name for the Pattern Match Group.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

agCurCfgPgrpMatchBmap 1.3.6.1.4.1.1872.2.5.1.1.14.1.2.1.3
The pattern matching rules applied to the port. The pattern rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ string 9 || || || ||___ string 8 || |____ string 7 || . . . ||_________ string 2 |__________ string 1 (as index to slbCurCfgUrlLbPathTable) where x : 1 - The represented string matching rule applied 0 - The represented string matching rule applied
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

agNewCfgPgrpMatchTable 1.3.6.1.4.1.1872.2.5.1.1.14.1.3
The table for Pattern Match Group definitions in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgNewCfgPgrpMatchEntry

agNewCfgPgrpMatchEntry 1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1
A row in the Pattern Match Group definition table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgNewCfgPgrpMatchEntry  

agNewCfgPgrpMatchIndex 1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.1
The index of the Pattern Match Group Definition table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agNewCfgPgrpName 1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.2
The name for the Pattern Match Group.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

agNewCfgPgrpMatchAdd 1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.3
The Pattern Match Group String added in the new_configuration block.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

agNewCfgPgrpMatchRem 1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.4
The Pattern Match Group String removed in the new_configuration block.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

agNewCfgPgrpMatchBmap 1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.5
The pattern matching rules applied to the port. The pattern rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ string 9 || || || ||___ string 8 || |____ string 7 || . . . ||_________ string 2 |__________ string 1 (as index to slbCurCfgUrlLbPathTable) where x : 1 - The represented string matching rule applied 0 - The represented string matching rule applied
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

agNewCfgPgrpDelete 1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.6
By setting the value to delete(2), the entire row is deleted.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

agCfgSecurityPortTable 1.3.6.1.4.1.1872.2.5.1.1.14.2
The table of Security related features enabled/disabled for this port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgCfgSecurityPortTableEntry

agCfgSecurityPortTableEntry 1.3.6.1.4.1.1872.2.5.1.1.14.2.1
A row in the Security related in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgCfgSecurityPortTableEntry  

agCfgSecurityPortIndx 1.3.6.1.4.1.1872.2.5.1.1.14.2.1.1
The port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agCurCfgSecurityDosState 1.3.6.1.4.1.1872.2.5.1.1.14.2.1.2
Enable/Disable DOS attack per port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSecurityDosState 1.3.6.1.4.1.1872.2.5.1.1.14.2.1.3
Enable/Disable DOS attack per port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSecurityIpAclState 1.3.6.1.4.1.1872.2.5.1.1.14.2.1.4
Enable/Disable IP ACL per port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSecurityIpAclState 1.3.6.1.4.1.1872.2.5.1.1.14.2.1.5
Enable/Disable IP ACL per port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSecurityUbState 1.3.6.1.4.1.1872.2.5.1.1.14.2.1.6
Enable/Disable UDP Blast per port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSecurityUbState 1.3.6.1.4.1.1872.2.5.1.1.14.2.1.7
Enable/Disable UDP Blast per port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSecurityBogonState 1.3.6.1.4.1.1872.2.5.1.1.14.2.1.8
Enable/Disable Bogon IP ACL per port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgSecurityBogonState 1.3.6.1.4.1.1872.2.5.1.1.14.2.1.9
Enable/Disable Bogon IP ACL per port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgSecurityAttacksBmap 1.3.6.1.4.1.1872.2.5.1.1.14.2.1.10
The DoS Attacks added/removed for this port. The selected DoS Attacks are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_______ 9 || || || ||_________ 8 || |__________ 7 || . . . ||________________ 2 |________________ 1 1 - IPLen 2 - IPVersion 3 - Broadcast 4 - Loopback 5 - Land 6 - IPReserved 7 - IPTTL 8 - IPProt 9 - IPOptLen 10 - FragMoreDont 11 - FragData 12 - FragBoundary 13 - FragLast 14 - FragDontOff 15 - FragOpt 16 - FragOff 17 - FragOversize 18 - TCPLen 19 - TCPPortZero 20 - BlatAttack 21 - TCPReserved 22 - NullScanAttack 23 - FullXmasScan 24 - FinScan 25 - VecnaScan 26 - XmasScanAttack 27 - SynFinScan 28 - FlagAbnormal 29 - SYNData 30 - SYNFrag 31 - FTPPort 32 - DNSPort 33 - SeqZero 34 - AckZero 35 - TCPOptLen 36 - UDPLen 37 - UDPPortZero 38 - FraggleAttack 39 - Pepsi 40 - Rc8 41 - SNMPNull 42 - ICMPLen 43 - SmurfAttack 44 - ICMPData 45 - ICMPOff 46 - ICMPType 47 - IGMPLen 48 - IGMPFrag 49 - IGMPType 50 - ARPLen 51 - ARPNbCast 52 - ARPNuCast 53 - ARPSpoof 54 - GARP 55 - IP6Len 56 - IP6Version where x : 1 - The represented DoS Attack is enabled 0 - The represented DoS Attack is disabled
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

agNewCfgSecurityAttacksBmap 1.3.6.1.4.1.1872.2.5.1.1.14.2.1.11
The DoS Attacks added/removed for this port. The selected DoS Attacks are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |______ 9 || || || ||________ 8 || |_________ 7 || . . . ||_______________ 2 |________________ 1 1 - IPLen 2 - IPVersion 3 - Broadcast 4 - Loopback 5 - Land 6 - IPReserved 7 - IPTTL 8 - IPProt 9 - IPOptLen 10 - FragMoreDont 11 - FragData 12 - FragBoundary 13 - FragLast 14 - FragDontOff 15 - FragOpt 16 - FragOff 17 - FragOversize 18 - TCPLen 19 - TCPPortZero 20 - BlatAttack 21 - TCPReserved 22 - NullScanAttack 23 - FullXmasScan 24 - FinScan 25 - VecnaScan 26 - XmasScanAttack 27 - SynFinScan 28 - FlagAbnormal 29 - SYNData 30 - SYNFrag 31 - FTPPort 32 - DNSPort 33 - SeqZero 34 - AckZero 35 - TCPOptLen 36 - UDPLen 37 - UDPPortZero 38 - FraggleAttack 39 - Pepsi 40 - Rc8 41 - SNMPNull 42 - ICMPLen 43 - SmurfAttack 44 - ICMPData 45 - ICMPOff 46 - ICMPType 47 - IGMPLen 48 - IGMPFrag 49 - IGMPType 50 - ARPLen 51 - ARPNbCast 52 - ARPNuCast 53 - ARPSpoof 54 - GARP 55 - IP6Len 56 - IP6Version where x : 1 - The represented DoS Attack is enabled 0 - The represented DoS Attack is disabled
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

agNewCfgSecurityAddAttack 1.3.6.1.4.1.1872.2.5.1.1.14.2.1.12
This is an action object to add a DoS Attack to a port. The value specified with this object is number given in this description. 1 - IPLen 2 - IPVersion 3 - Broadcast 4 - Loopback 5 - Land 6 - IPReserved 7 - IPTTL 8 - IPProt 9 - IPOptLen 10 - FragMoreDont 11 - FragData 12 - FragBoundary 13 - FragLast 14 - FragDontOff 15 - FragOpt 16 - FragOff 17 - FragOversize 18 - TCPLen 19 - TCPPortZero 20 - BlatAttack 21 - TCPReserved 22 - NullScanAttack 23 - FullXmasScan 24 - FinScan 25 - VecnaScan 26 - XmasScanAttack 27 - SynFinScan 28 - FlagAbnormal 29 - SYNData 30 - SYNFrag 31 - FTPPort 32 - DNSPort 33 - SeqZero 34 - AckZero 35 - TCPOptLen 36 - UDPLen 37 - UDPPortZero 38 - FraggleAttack 39 - Pepsi 40 - Rc8 41 - SNMPNull 42 - ICMPLen 43 - SmurfAttack 44 - ICMPData 45 - ICMPOff 46 - ICMPType 47 - IGMPLen 48 - IGMPFrag 49 - IGMPType 50 - ARPLen 51 - ARPNbCast 52 - ARPNuCast 53 - ARPSpoof 54 - GARP 55 - IP6Len 56 - IP6Version When read, the value '0' is returned always.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER iplen(1), ipversion(2), broadcast(3), loopback(4), land(5), ipreserved(6), ipttl(7), ipprot(8), ipoptlen(9), fragmoredont(10), fragdata(11), fragboundary(12), fraglast(13), fragdontoff(14), fragopt(15), fragoff(16), fragoversize(17), tcplen(18), tcpportzero(19), blat(20), tcpreserved(21), nullscan(22), fullxmasscan(23), finscan(24), vecnascan(25), xmassscan(26), synfinscan(27), flagabnormal(28), syndata(29), synfrag(30), ftpport(31), dnsport(32), seqzero(33), ackzero(34), tcpoptlen(35), udplen(36), udpportzero(37), fraggle(38), pepsi(39), rc8(40), snmpnull(41), icmplen(42), smurf(43), icmpdata(44), icmpoff(45), icmptype(46), igmplen(47), igmpfrag(48), igmptype(49), arplen(50), arpnbcast(51), arpnucast(52), arpspoof(53), garp(54), ip6len(55), ip6version(56)  

agNewCfgSecurityRemAttack 1.3.6.1.4.1.1872.2.5.1.1.14.2.1.13
This is an action object to remove a DoS attack for a port. The value specified with this object is number given in this description. 1 - IPLen 2 - IPVersion 3 - Broadcast 4 - Loopback 5 - Land 6 - IPReserved 7 - IPTTL 8 - IPProt 9 - IPOptLen 10 - FragMoreDont 11 - FragData 12 - FragBoundary 13 - FragLast 14 - FragDontOff 15 - FragOpt 16 - FragOff 17 - FragOversize 18 - TCPLen 19 - TCPPortZero 20 - BlatAttack 21 - TCPReserved 22 - NullScanAttack 23 - FullXmasScan 24 - FinScan 25 - VecnaScan 26 - XmasScanAttack 27 - SynFinScan 28 - FlagAbnormal 29 - SYNData 30 - SYNFrag 31 - FTPPort 32 - DNSPort 33 - SeqZero 34 - AckZero 35 - TCPOptLen 36 - UDPLen 37 - UDPPortZero 38 - FraggleAttack 39 - Pepsi 40 - Rc8 41 - SNMPNull 42 - ICMPLen 43 - SmurfAttack 44 - ICMPData 45 - ICMPOff 46 - ICMPType 47 - IGMPLen 48 - IGMPFrag 49 - IGMPType 50 - ARPLen 51 - ARPNbCast 52 - ARPNuCast 53 - ARPSpoof 54 - GARP 55 - IP6Len 56 - IP6Version When read, the value '0' is returned always.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER iplen(1), ipversion(2), broadcast(3), loopback(4), land(5), ipreserved(6), ipttl(7), ipprot(8), ipoptlen(9), fragmoredont(10), fragdata(11), fragboundary(12), fraglast(13), fragdontoff(14), fragopt(15), fragoff(16), fragoversize(17), tcplen(18), tcpportzero(19), blat(20), tcpreserved(21), nullscan(22), fullxmasscan(23), finscan(24), vecnascan(25), xmassscan(26), synfinscan(27), flagabnormal(28), syndata(29), synfrag(30), ftpport(31), dnsport(32), seqzero(33), ackzero(34), tcpoptlen(35), udplen(36), udpportzero(37), fraggle(38), pepsi(39), rc8(40), snmpnull(41), icmplen(42), smurf(43), icmpdata(44), icmpoff(45), icmptype(46), igmplen(47), igmpfrag(48), igmptype(49), arplen(50), arpnbcast(51), arpnucast(52), arpspoof(53), garp(54), ip6len(55), ip6version(56)  

agNewCfgSecurityDoSAttacks 1.3.6.1.4.1.1872.2.5.1.1.14.2.1.14
Add all DoS attacks to the port by setting the value to '2'. Remove all DoS attacks from the port by setting the value to '3'. Do nothing by setting the value to '1'. When read, the value '0' is returned always.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), addall(2), remall(3)  

ipAclTableMaxSize 1.3.6.1.4.1.1872.2.5.1.1.14.3.1
The maximum number of rows in the IP ACL table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipAclCurCfgTable 1.3.6.1.4.1.1872.2.5.1.1.14.3.2
The table of IP ACL in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAclCurCfgEntry

ipAclCurCfgEntry 1.3.6.1.4.1.1872.2.5.1.1.14.3.2.1
A row in the IP ACL table
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAclCurCfgEntry  

ipAclCurCfgIndx 1.3.6.1.4.1.1872.2.5.1.1.14.3.2.1.1
The index of the IP ACL table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipAclCurCfgIp 1.3.6.1.4.1.1872.2.5.1.1.14.3.2.1.2
The IP address of the entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipAclCurCfgMask 1.3.6.1.4.1.1872.2.5.1.1.14.3.2.1.3
The IP address Mask of the entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipAclNewCfgTable 1.3.6.1.4.1.1872.2.5.1.1.14.3.3
The table of IP ACL in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAclNewCfgEntry

ipAclNewCfgEntry 1.3.6.1.4.1.1872.2.5.1.1.14.3.3.1
A row in the IP ACL table
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAclNewCfgEntry  

ipAclNewCfgIndx 1.3.6.1.4.1.1872.2.5.1.1.14.3.3.1.1
The index of the IP ACL table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipAclNewCfgIp 1.3.6.1.4.1.1872.2.5.1.1.14.3.3.1.2
The IP address of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipAclNewCfgAction 1.3.6.1.4.1.1872.2.5.1.1.14.3.3.1.3
When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipAclNewCfgMask 1.3.6.1.4.1.1872.2.5.1.1.14.3.3.1.4
The IP address Mask of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

udpBlastudpPortTableMaxSize 1.3.6.1.4.1.1872.2.5.1.1.14.4.1
The maximum number of rows in the UDP Blast Port table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

udpBlastCurCfgudpPortPacketLimit 1.3.6.1.4.1.1872.2.5.1.1.14.4.2
The default packet limit in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..20000000  

udpBlastCurCfgudpPortTable 1.3.6.1.4.1.1872.2.5.1.1.14.4.3
The UDP Blast port table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UdpBlastCurCfgudpPortEntry

udpBlastCurCfgudpPortEntry 1.3.6.1.4.1.1872.2.5.1.1.14.4.3.1
A row in the UDP Blast UDP Port table
Status: current Access: not-accessible
OBJECT-TYPE    
  UdpBlastCurCfgudpPortEntry  

udpBlastCurCfgudpPortLowIndx 1.3.6.1.4.1.1872.2.5.1.1.14.4.3.1.1
The low UDP port number of UDP port range in the UDP Port table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

udpBlastCurCfgudpPortHighIndx 1.3.6.1.4.1.1872.2.5.1.1.14.4.3.1.2
The high UDP port number of UDP port range in the UDP Port table. If highIndx and lowIndx are set to the same, it is considered a single port instead of range
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

udpBlastCurCfgudpPortEntryPacketLimit 1.3.6.1.4.1.1872.2.5.1.1.14.4.3.1.3
The Packet Limit of the UDP Port Entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..20000000  

udpBlastNewCfgudpPortPacketLimit 1.3.6.1.4.1.1872.2.5.1.1.14.4.4
The default packet limit in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..20000000  

udpBlastNewCfgudpPortTable 1.3.6.1.4.1.1872.2.5.1.1.14.4.5
The UDP Blast table in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UdpBlastNewCfgudpPortEntry

udpBlastNewCfgudpPortEntry 1.3.6.1.4.1.1872.2.5.1.1.14.4.5.1
A row in the UDP Blast UDP Port table
Status: current Access: not-accessible
OBJECT-TYPE    
  UdpBlastNewCfgudpPortEntry  

udpBlastNewCfgudpPortLowIndx 1.3.6.1.4.1.1872.2.5.1.1.14.4.5.1.1
The low UDP port number of UDP port range in the UDP Port table. The difference between the minimum of all the low UDP port number specified and the maximum of all the high UDP port number specified can't exceed 5000.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

udpBlastNewCfgudpPortHighIndx 1.3.6.1.4.1.1872.2.5.1.1.14.4.5.1.2
The high UDP port number of UDP port range in the UDP Port table. The difference between the minimum of all the low UDP port number specified and the maximum of all the high UDP port number specified can't exceed 5000. If highIndx and lowIndx are set to the same, it is considered a single port instead of range.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

udpBlastNewCfgudpPortEntryDelete 1.3.6.1.4.1.1872.2.5.1.1.14.4.5.1.3
This deletes the UDP port entry from lowIndx to highIndx.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

udpBlastNewCfgudpPortEntryPacketLimit 1.3.6.1.4.1.1872.2.5.1.1.14.4.5.1.4
The Packet Limit of the UDP Port Entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..20000000  

secCurCfgSecurityLogThreshold 1.3.6.1.4.1.1872.2.5.1.1.14.5.1
The rate threshold for security logging in packets/sec. Rate zero indicates no rate threshold.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1048576  

secNewCfgSecurityLogThreshold 1.3.6.1.4.1.1872.2.5.1.1.14.5.2
The rate threshold for security logging in packets/sec. Rate zero indicates no rate threshold.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1048576  

secCurCfgPacketDepth 1.3.6.1.4.1.1872.2.5.1.1.14.5.5
Depth of match for pattern matching, in units of packets. A value of 0 means match all packets in the stream.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

secNewCfgPacketDepth 1.3.6.1.4.1.1872.2.5.1.1.14.5.6
Depth of match for pattern matching, in units of packets. A value of 0 means match all packets in the stream.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

secCurCfgIpAclSyslogThreshold 1.3.6.1.4.1.1872.2.5.1.1.14.5.7
Display syslog when threshold number of ACL's have been hit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

secNewCfgIpAclSyslogThreshold 1.3.6.1.4.1.1872.2.5.1.1.14.5.8
Display syslog when threshold number of ACL's have been hit.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

secCurCfgIpAclSyslogTime 1.3.6.1.4.1.1872.2.5.1.1.14.5.9
Display syslog after specified number of minutes have passed.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

secNewCfgIpAclSyslogTime 1.3.6.1.4.1.1872.2.5.1.1.14.5.10
Display syslog after specified number of minutes have passed.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dosCurCfgIPTTL 1.3.6.1.4.1.1872.2.5.1.1.14.6.1
The smallest allowable IP ttl.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

dosNewCfgIPTTL 1.3.6.1.4.1.1872.2.5.1.1.14.6.2
The smallest allowable IP ttl.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dosCurCfgIPProt 1.3.6.1.4.1.1872.2.5.1.1.14.6.3
The highest allowable IP protocol.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

dosNewCfgIPProt 1.3.6.1.4.1.1872.2.5.1.1.14.6.4
The highest allowable IP protocol.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dosCurCfgFragdata 1.3.6.1.4.1.1872.2.5.1.1.14.6.5
The smallest allowable IP fragment payload.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 16..248  

dosNewCfgFragdata 1.3.6.1.4.1.1872.2.5.1.1.14.6.6
The smallest allowable IP fragment payload.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 16..248  

dosCurCfgFragoff 1.3.6.1.4.1.1872.2.5.1.1.14.6.7
The smallest allowable IP fragment offset.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 16..248  

dosNewCfgFragoff 1.3.6.1.4.1.1872.2.5.1.1.14.6.8
The smallest allowable IP fragment offset.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 16..248  

dosCurCfgSYNdata 1.3.6.1.4.1.1872.2.5.1.1.14.6.9
The largest allowable TCP SYN payload.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

dosNewCfgSYNdata 1.3.6.1.4.1.1872.2.5.1.1.14.6.10
The largest allowable TCP SYN payload.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dosCurCfgICMPdata 1.3.6.1.4.1.1872.2.5.1.1.14.6.11
The largest allowable ICMP payload.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..9026  

dosNewCfgICMPdata 1.3.6.1.4.1.1872.2.5.1.1.14.6.12
The largest allowable ICMP payload.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..9026  

dosCurCfgICMPoff 1.3.6.1.4.1.1872.2.5.1.1.14.6.13
The largest allowable ICMP fragment offset.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8190  

dosNewCfgICMPoff 1.3.6.1.4.1.1872.2.5.1.1.14.6.14
The largest allowable ICMP fragment offset.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..8190  

ipDstAclTableMaxSize 1.3.6.1.4.1.1872.2.5.1.1.14.7.1
The maximum number of rows in the DST IP ACL table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipDstAclCurCfgTable 1.3.6.1.4.1.1872.2.5.1.1.14.7.2
The table of DST IP ACL in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpDstAclCurCfgEntry

ipDstAclCurCfgEntry 1.3.6.1.4.1.1872.2.5.1.1.14.7.2.1
A row in the DST IP ACL table
Status: current Access: not-accessible
OBJECT-TYPE    
  IpDstAclCurCfgEntry  

ipDstAclCurCfgIndx 1.3.6.1.4.1.1872.2.5.1.1.14.7.2.1.1
The index of the DST IP ACL table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipDstAclCurCfgIp 1.3.6.1.4.1.1872.2.5.1.1.14.7.2.1.2
The IP address of the entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipDstAclCurCfgMask 1.3.6.1.4.1.1872.2.5.1.1.14.7.2.1.3
The IP address Mask of the entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipDstAclNewCfgTable 1.3.6.1.4.1.1872.2.5.1.1.14.7.3
The table of DST IP ACL in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpDstAclNewCfgEntry

ipDstAclNewCfgEntry 1.3.6.1.4.1.1872.2.5.1.1.14.7.3.1
A row in the DST IP ACL table
Status: current Access: not-accessible
OBJECT-TYPE    
  IpDstAclNewCfgEntry  

ipDstAclNewCfgIndx 1.3.6.1.4.1.1872.2.5.1.1.14.7.3.1.1
The index of the DST IP ACL table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipDstAclNewCfgIp 1.3.6.1.4.1.1872.2.5.1.1.14.7.3.1.2
The IP address of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipDstAclNewCfgAction 1.3.6.1.4.1.1872.2.5.1.1.14.7.3.1.3
When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipDstAclNewCfgMask 1.3.6.1.4.1.1872.2.5.1.1.14.7.3.1.4
The IP address Mask of the entry.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

agBogonFileSeqNumber 1.3.6.1.4.1.1872.2.5.1.1.14.9.1
bogon file sequence number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

agDosPortStatsTable 1.3.6.1.4.1.1872.2.5.1.2.6.1
The table of DOS port statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgDosPortStatsTableEntry

agDosPortStatsTableEntry 1.3.6.1.4.1.1872.2.5.1.2.6.1.1
A row in the port stats table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgDosPortStatsTableEntry  

agDosPortStatsIndx 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.1
The port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agDosPortStatsIPLen 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.10
IPv4 packets with bad IP header or payload length.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsIPVersion 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.11
IPv4 packets with IP version not 4.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsBroadcast 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.12
IPv4 packets with broadcast source or destination IP [0.0.0.0,255.255.255.255].
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsLoopback 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.13
IPv4 packets with loopback source or destination IP [127.0.0.0/8].
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsLand 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.14
IPv4 Packets with source IP equal to destination IP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsIPReserved 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.15
IPv4 packets with IP reserved bit is set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsIPTTL 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.16
IPv4 packets with small IP TTL.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsIPProt 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.17
IPv4 packets with IP protocol is unassigned or reserved.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsIPOptLen 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.18
IPv4 packets with bad IP options length.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsFragMoreDont 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.19
IPv4 packets with more fragments and don't fragment bits are set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsFragData 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.20
IPv4 packets with more fragments bit is set and small payload.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsFragBoundary 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.21
IPv4 packets with more fragments bit is set and payload not at 8-byte boundary.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsFragLast 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.22
IPv4 packets last fragment without payload.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsFragDontOff 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.23
IPv4 packets with non-zero fragment offset and don't fragment bits are set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsFragOpt 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.24
IPv4 packets with non-zero fragment offset and IP options.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsFragOff 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.25
IPv4 packets with small non-zero fragment offset.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsFragOversize 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.26
IPv4 packets with non-zero fragment offset and oversize payload.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsTCPLen 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.27
TCP packets with bad TCP header length.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsTCPPortZero 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.28
TCP packets with source or destination port is zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsBlatAttack 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.29
TCP packets source IP not equal to destination IP and source port equal to destination port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsTCPReserved 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.30
TCP packets with TCP reserved bit is set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsNullScanAttack 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.31
TCP packets were the TCP sequence number is zero and all control bits are zeroes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsFullXmasScan 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.32
TCP packets with all control bits are set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsFinScan 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.33
TCP packets with only FIN bit is set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsVecnaScan 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.34
TCP packets with only URG or PUSH or URG|FIN or PSH|FIN or URG|PSH bits are set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsXmasScanAttack 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.35
TCP packets were the TCP sequence number is zero and FIN, URG and PSH bits are set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsSynFinScan 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.36
TCP packets were SYN and FIN bits are set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsFlagAbnormal 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.37
TCP packets with abnormal control bits combination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsSYNData 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.38
TCP packets with SYN bit is set and with payload.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsSYNFrag 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.39
TCP packets with SYN bit is set and more fragments bit is set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsFTPPort 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.40
TCP packets with SPORT=20, DPORT<1024 and SYN bit is set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsDNSPort 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.41
TCP packets with SPORT=53, DPORT<1024 and SYN bit is set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsSeqZero 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.42
TCP packets with sequence number is zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsAckZero 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.43
TCP packets with acknowledgement number is zero and ACK bit is set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsTCPOptLen 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.44
TCP packets with bad TCP options length.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsUDPLen 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.45
UDP packets with bad UDP header length.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsUDPPortZero 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.46
UDP packets with source or destination port is zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsFraggleAttack 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.47
UDP packets sent to a broadcast destination IP (x.x.x.255).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsPepsi 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.48
UDP packets with SPORT=19, DPORT=7 or SPORT=7, DPORT=19.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsRc8 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.49
UDP packets with SPORT=7 and DPORT=7.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsSNMPNull 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.50
UDP packets with DPORT=161 and without payload.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsICMPLen 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.51
ICMP packets with bad ICMP header length.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsSmurfAttack 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.52
ICMP ping request to a broadcast destination IP x.x.x.255.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsICMPData 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.53
ICMP packets with non-zero fragment offset and large payload.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsICMPOff 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.54
ICMP packets with large fragment offset.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsICMPType 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.55
ICMP packets with type is reserved.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsIGMPLen 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.56
IGMP packets with bad IGMP header length.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsIGMPFrag 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.57
IGMP packets with more fragments bit is set.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsIGMPType 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.58
IGMP packets with type is reserved.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsARPLen 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.59
ARP request or reply packets with bad length.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsARPNbCast 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.60
ARP request packets with non broadcast destination MAC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsARPNuCast 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.61
ARP reply packets with non unicast destination MAC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsARPSpoof 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.62
ARP request or reply packets with mismatch source with sender MACs or destination with target MACs.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsGARP 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.63
ARP request or reply packets with same source and destination IP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsIP6Len 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.64
IPv6 packets with bad header length.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agDosPortStatsIP6Version 1.3.6.1.4.1.1872.2.5.1.2.6.1.1.65
IPv6 packets with IP version not 6.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agSecurityPgrpStatsTable 1.3.6.1.4.1.1872.2.5.1.2.6.2
The table of pattern group statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgSecurityPgrpStatsTableEntry

agSecurityPgrpStatsTableEntry 1.3.6.1.4.1.1872.2.5.1.2.6.2.1
A row in the port stats table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgSecurityPgrpStatsTableEntry  

agSecurityPgrpStatsIndx 1.3.6.1.4.1.1872.2.5.1.2.6.2.1.1
The Pattern Group index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSecurityPgrpStatsName 1.3.6.1.4.1.1872.2.5.1.2.6.2.1.2
The name of the Pattern Group.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agSecurityPgrpStatsHits 1.3.6.1.4.1.1872.2.5.1.2.6.2.1.3
The total hits for this Pattern Group.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agSecurityUbStatsTable 1.3.6.1.4.1.1872.2.5.1.2.6.3
The table of UDP Blast statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgSecurityUbStatsTableEntry

agSecurityUbStatsTableEntry 1.3.6.1.4.1.1872.2.5.1.2.6.3.1
A row in the UDP Blast stats table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgSecurityUbStatsTableEntry  

agSecurityUbStatsIndx 1.3.6.1.4.1.1872.2.5.1.2.6.3.1.1
The UDP Blast Statistics Group index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSecurityUbStatsPort 1.3.6.1.4.1.1872.2.5.1.2.6.3.1.2
UDP Port Number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSecurityUbStatsBlockedPacket 1.3.6.1.4.1.1872.2.5.1.2.6.3.1.3
Total blocked packet.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agSecurityUbStatsPacketRate 1.3.6.1.4.1.1872.2.5.1.2.6.3.1.4
Current Packet rate per second.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agSecurityIpAclStatsTable 1.3.6.1.4.1.1872.2.5.1.2.6.4
The table of IP ACL statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgSecurityIpAclStatsTableEntry

agSecurityIpAclStatsTableEntry 1.3.6.1.4.1.1872.2.5.1.2.6.4.1
A row in the IP ACL stats table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgSecurityIpAclStatsTableEntry  

agSecurityIpAclStatsIndx 1.3.6.1.4.1.1872.2.5.1.2.6.4.1.1
The IP ACL Statistics Group index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSecurityIpAclStatsAddress 1.3.6.1.4.1.1872.2.5.1.2.6.4.1.2
IP ACL IP Address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agSecurityIpAclStatsBlockedPacket 1.3.6.1.4.1.1872.2.5.1.2.6.4.1.3
Total blocked packet.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agSecurityIpDstAclStatsTable 1.3.6.1.4.1.1872.2.5.1.2.6.5
The table of DST IP ACL statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgSecurityIpDstAclStatsTableEntry

agSecurityIpDstAclStatsTableEntry 1.3.6.1.4.1.1872.2.5.1.2.6.5.1
A row in the DST IP ACL stats table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgSecurityIpDstAclStatsTableEntry  

agSecurityIpDstAclStatsIndx 1.3.6.1.4.1.1872.2.5.1.2.6.5.1.1
The DST IP ACL Statistics Group index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSecurityIpDstAclStatsAddress 1.3.6.1.4.1.1872.2.5.1.2.6.5.1.2
DST IP ACL IP Address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agSecurityIpDstAclStatsBlockedPacket 1.3.6.1.4.1.1872.2.5.1.2.6.5.1.3
Total blocked packet.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

agPortAccessTableMaxSize 1.3.6.1.4.1.1872.2.5.1.1.16.1
The maximum number of entries in Port Access Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agCurCfgPortAccessTable 1.3.6.1.4.1.1872.2.5.1.1.16.2
The table of ports and their access states
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgCurCfgPortAccessEntry

agCurCfgPortAccessEntry 1.3.6.1.4.1.1872.2.5.1.1.16.2.1
A row in the port access table
Status: current Access: not-accessible
OBJECT-TYPE    
  AgCurCfgPortAccessEntry  

agCurCfgPortAccessIndex 1.3.6.1.4.1.1872.2.5.1.1.16.2.1.1
The port number in the table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agCurCfgPortAccessState 1.3.6.1.4.1.1872.2.5.1.1.16.2.1.2
The port access state of the port. deny(0) - port does not have management access allow(1) - port has management access
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER deny(0), allow(1)  

agNewCfgPortAccessTable 1.3.6.1.4.1.1872.2.5.1.1.16.3
The table of ports and their access states
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgNewCfgPortAccessEntry

agNewCfgPortAccessEntry 1.3.6.1.4.1.1872.2.5.1.1.16.3.1
A row in the port access table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgNewCfgPortAccessEntry  

agNewCfgPortAccessIndex 1.3.6.1.4.1.1872.2.5.1.1.16.3.1.1
The port number in the table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agNewCfgPortAccessState 1.3.6.1.4.1.1872.2.5.1.1.16.3.1.2
The port access state of the port. deny(0) - port does not have management access allow(1) - port has management access
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deny(0), allow(1)  

agVLANAccessTableMaxSize 1.3.6.1.4.1.1872.2.5.1.1.24.1
The maximum number of entries in VLAN Access Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agCurCfgVLANAccessTable 1.3.6.1.4.1.1872.2.5.1.1.24.2
The table of VLAN's and their access states
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgCurCfgVLANAccessEntry

agCurCfgVLANAccessEntry 1.3.6.1.4.1.1872.2.5.1.1.24.2.1
A row in the VLAN access table
Status: current Access: not-accessible
OBJECT-TYPE    
  AgCurCfgVLANAccessEntry  

agCurCfgVLANAccessIndex 1.3.6.1.4.1.1872.2.5.1.1.24.2.1.1
The VLAN number in the table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agCurCfgVLANAccessState 1.3.6.1.4.1.1872.2.5.1.1.24.2.1.2
The VLAN access state of the port. deny(0) - VLAN does not have management access allow(1) - VLAN has management access
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER deny(0), allow(1)  

agNewCfgVLANAccessTable 1.3.6.1.4.1.1872.2.5.1.1.24.3
The table of VLAN's and their access states
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgNewCfgVLANAccessEntry

agNewCfgVLANAccessEntry 1.3.6.1.4.1.1872.2.5.1.1.24.3.1
A row in the VLAN access table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgNewCfgVLANAccessEntry  

agNewCfgVLANAccessIndex 1.3.6.1.4.1.1872.2.5.1.1.24.3.1.1
The VLAN number in the table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agNewCfgVLANAccessState 1.3.6.1.4.1.1872.2.5.1.1.24.3.1.2
The VLAN access state of the port. deny(0) - VLAN does not have management access allow(1) - VLAN has management access
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deny(0), allow(1)  

agSaveConfig 1.3.6.1.4.1.1872.2.5.1.1.17.1
When this object is read the current state is returned. idle(2) indicates that there is no save in progess. complete(4) indicates that the last save operation is completed. Setting the value to save(1), will write the current config block since the last save to the flash memory with backup, for saving without backup saveNoBackup(6) can be used. If the save is successful this variable will return the state 'complete' else it will return 'failed'. In case of failure, to read the reason for failure use the agSaveTable. Once the operation is completed or the agSaveTable is read , the save buffer needs to be freed and the agSaveState should be set back to 'idle' state so others can issue the save command via SNMP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER save(1), idle(2), inprogress(3), complete(4), failed(5), saveNoBackup(6)  

agSaveTableSize 1.3.6.1.4.1.1872.2.5.1.1.17.2
The number of strings in the save table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSaveTable 1.3.6.1.4.1.1872.2.5.1.1.17.3
The table of error messages for asynchrnous save operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgSaveTableEntry

agSaveTableEntry 1.3.6.1.4.1.1872.2.5.1.1.17.3.1
Error Strings generated while asynchronous save operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgSaveTableEntry  

agSaveIndex 1.3.6.1.4.1.1872.2.5.1.1.17.3.1.1
The table index for save.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agSaveString 1.3.6.1.4.1.1872.2.5.1.1.17.3.1.2
A string in the Save table.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

agFileSize 1.3.6.1.4.1.1872.2.5.1.1.18.1
This is the number of octets in the file. This is set to indicate the total size of the file that is being transfered. The value is set in bytes. File size range for Bogon File Transfer 1 - 2097152 and for Symantec Signature 1 - 178176
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

agFileTransferState 1.3.6.1.4.1.1872.2.5.1.1.18.2
When this object is read the current state is returned. idle(1) indicates that there is no transfer in progess. Any user must verify the state machine is in state idle before setting the state to transfer(2).Before setting transfer(2) state agFileSize and agFileType should be set and then transition changes to inprogress(3). While in this state, the agFileTable should be populated with all the rows needed to transfer the files entire contents. endoftransfer(7) should be set inorder to notify the agent that contents are transfered. If all the contents are received, then the state transitions to complete(5). If there are any missing rows, the agent will transition to the state missingrows(4). The user must either populate the missing rows, and give a endoftransfer(7) state, or give up the transfer by setting the state to idle(1). When the idle(1) state is set, the string with missing rows is cleared and the buffer is written to the file, state goes complete(5) to upon successful completion. Any transition to idle(1) will free any resources associated with the file transfer, that are no longer needed. The agFileTable will contain 0 rows. While in state missingrows(4), agFileTableMissingRows will contain a parseable string of missing row indexes seperated by a comma.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), transfer(2), inprogress(3), missingrows(4), complete(5), error(6), endoftransfer(7)  

agFileTableMissingRows 1.3.6.1.4.1.1872.2.5.1.1.18.3
A string representing the missing rows of data for the file transfer. This is only valid while agFileTransferState is in the missingrows(4) state. The string will be numbers representing the missing row indexes seperated by commas e.g. 13,25,99
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

agFileType 1.3.6.1.4.1.1872.2.5.1.1.18.4
This identifies the file type that is being transfered.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER bogon(1), symantecSignature(2)  

agFileTableSize 1.3.6.1.4.1.1872.2.5.1.1.18.5
The number of rows in the file table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agFileTable 1.3.6.1.4.1.1872.2.5.1.1.18.6
The table of octets that when combined create a file.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgFileTableEntry

agFileTableEntry 1.3.6.1.4.1.1872.2.5.1.1.18.6.1
An entry in the file table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgFileTableEntry  

agFileIndex 1.3.6.1.4.1.1872.2.5.1.1.18.6.1.1
The table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agFileString 1.3.6.1.4.1.1872.2.5.1.1.18.6.1.2
A string with bogon ip/mask pair.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

agFileErrorTableSize 1.3.6.1.4.1.1872.2.5.1.1.18.7
The number of strings in the snmp file transfer error table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agFileErrorTable 1.3.6.1.4.1.1872.2.5.1.1.18.8
The table of error messages for asynchrnous snmp file transfer operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgFileErrorTableEntry

agFileErrorTableEntry 1.3.6.1.4.1.1872.2.5.1.1.18.8.1
Error Strings generated while asynchronous snmp file transfer operation.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgFileErrorTableEntry  

agFileErrorIndex 1.3.6.1.4.1.1872.2.5.1.1.18.8.1.1
The table index for snmp file transfer error table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agFileErrorString 1.3.6.1.4.1.1872.2.5.1.1.18.8.1.2
A string in the snmp file transfer error table.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agAccessUser 1.3.6.1.4.1.1872.2.5.1.1.19.1
OBJECT IDENTIFIER    

agAccessUid 1.3.6.1.4.1.1872.2.5.1.1.19.1.1
OBJECT IDENTIFIER    

agAccessUserCurCfgTable 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1
The table of Access user configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgAccessUserCurCfgTableEntry

agAccessUserCurCfgTableEntry 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1
A row in the Access user configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgAccessUserCurCfgTableEntry  

agAccessUserCurCfgUId 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.1
The User identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agAccessUserCurCos 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.2
The user class of service.The COS applicable for users in a) Admin Context - user(0),l1oper(11),l2oper(12),oper(4) & admin(7) b) vADC - All except l1oper(11) & l2oper(12) c) Standalone ADC - All except l3oper(9),l3admin(10),l1oper(11) & l2oper(12).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER user(0), crtadmin(1), slboper(2), l4oper(3), oper(4), slbadmin(5), l4admin(6), admin(7), slbview(8), l3oper(9), l3admin(10), l1oper(11), l2oper(12)  

agAccessUserCurCfgName 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.3
The user name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

agAccessUserCurCfgAdminPswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.4
The character string representing the admin password.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessUserCurCfgPswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.5
The character string representing the user password.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessUserCurCfgConfPswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.6
The character string is used to confirm the user password.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessUserCurCfgBackDoor 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.7
Enable or disable User backdoor Access.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agAccessUserCurCfgCrtMng 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.8
Enable or disable certificate management permissions.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agAccessUserCurCfgReal 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.9
The user real servers.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

agAccessUserCurCfgState 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.10
Enable or disable a user.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agAccessUserCurCfgBmap 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.1.1.11
The real servers added to this user. The selected real servers are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Real Server 9 || || || ||___ Real Server 8 || |____ Real Server 7 || . . . ||_________ Real Server 2 |__________ Real Server 1 where x : 1 - The represented Real Server is added 0 - The represented Real Server is not added
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

agAccessUserNewCfgTable 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2
The table of Access user configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgAccessUserNewCfgTableEntry

agAccessUserNewCfgTableEntry 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1
A row in the Access user configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgAccessUserNewCfgTableEntry  

agAccessUserNewCfgUId 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.1
The User identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agAccessUserNewCos 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.2
The user class of service.The COS applicable for users in a) Admin Context - user(0),l1oper(11),l2oper(12),oper(4) & admin(7) b) vADC - All except l1oper(11) & l2oper(12) c) Standalone ADC - All except l3oper(9),l3admin(10),l1oper(11) & l2oper(12).
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER user(0), crtadmin(1), slboper(2), l4oper(3), oper(4), slbadmin(5), l4admin(6), admin(7), slbview(8), l3oper(9), l3admin(10), l1oper(11), l2oper(12)  

agAccessUserNewCfgName 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.3
The user name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..8)  

agAccessUserNewCfgAdminPswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.4
The character string representing the admin password.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessUserNewCfgPswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.5
The character string representing the user passworde.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessUserNewCfgConfPswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.6
This character string is used to confirm the user password.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessUserNewCfgBackDoor 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.7
Enable or disable User backdoor access.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agAccessUserNewCfgCrtMng 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.8
Enable or disable a certificate management permissions.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agAccessUserNewCfgRealAdd 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.9
Add user real server.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

agAccessUserNewCfgRealRem 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.10
Remove user real server.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

agAccessUserNewCfgState 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.11
Enable or disable a user.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agAccessUserNewCfgDelete 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.12
This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

agAccessUserNewCfgBmap 1.3.6.1.4.1.1872.2.5.1.1.19.1.1.2.1.13
The real servers added to this user. The selected real servers are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Real Server 9 || || || ||___ Real Server 8 || |____ Real Server 7 || . . . ||_________ Real Server 2 |__________ Real Server 1 where x : 1 - The represented Real Server is added 0 - The represented Real Server is not added
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

agAccessUsrPasswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.2
The character string representing the user password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessSlbOperPasswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.3
The character string representing the SLB operator(slboper) password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessL4OperPasswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.4
The character string representing the L4 operator(l4oper) password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessOperPasswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.5
The character string representing the Operator(oper) password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessSlbAdminPasswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.6
The character string representing the Slb Admin (slbadmin) password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessL4AdminPasswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.7
The character string representing the L4 Admin(l4admin) password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessAdminPasswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.8
The character string representing the current Administrator(admin) password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessAdminNewPasswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.9
The character string representing the Administrator(admin) New password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessAdminConfNewPasswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.11
The character string is used to confirm the Administrator(admin) New password.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessSlbViewerPasswd 1.3.6.1.4.1.1872.2.5.1.1.19.1.12
The character string representing the Slb Viewer password (slbviewer).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

agAccessTelnet 1.3.6.1.4.1.1872.2.5.1.1.19.2
Enable or disable Telnet server access.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agAccessHttp 1.3.6.1.4.1.1872.2.5.1.1.19.3
Enable or disable HTTP (Web) server access.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agAccessHttps 1.3.6.1.4.1.1872.2.5.1.1.19.4
OBJECT IDENTIFIER    

agAccessCurCfgHttpsState 1.3.6.1.4.1.1872.2.5.1.1.19.4.1
Enable or disable HTTPS server access.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agAccessNewCfgHttpsState 1.3.6.1.4.1.1872.2.5.1.1.19.4.2
Enable or disable HTTPS server access.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

agAccessCurCfgHttpsPort 1.3.6.1.4.1.1872.2.5.1.1.19.4.3
Enter HTTPS server port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

agAccessNewCfgHttpsPort 1.3.6.1.4.1.1872.2.5.1.1.19.4.4
Enter HTTPS server port number.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

agAccessCurCfgHttpsCert 1.3.6.1.4.1.1872.2.5.1.1.19.4.5
Association of HTTPS server certificate from certificate repository.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

agAccessNewCfgHttpsCert 1.3.6.1.4.1.1872.2.5.1.1.19.4.6
Association of HTTPS server certificate from certificate repository.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

agAccessHttpsCfgCertsTable 1.3.6.1.4.1.1872.2.5.1.1.19.4.7
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgAccessHttpsCfgCertsEntry

agAccessHttpsCfgCertsEntry 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgAccessHttpsCfgCertsEntry  

agAccessHttpsCfgCertsID 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1  

agAccessHttpsCfgCertsName 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.3
Certificate name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

agAccessHttpsCfgCertsKeySize 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.4
Key size for the generated certificate
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ks512(1), ks1024(2), ks2048(3), ks4096(4), unknown(6)  

agAccessHttpsCfgCertsExpiry 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.5
Certificate expiry date
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agAccessHttpsCfgCertsCommonName 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.6
Your website address should be provided here
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..85)  

agAccessHttpsCfgCertsHashAlgo 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.7
Hash algorithm for cert generation
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER md5(1), sha1(2), sha256(3), sha384(4), sha512(5), unknown(6)  

agAccessHttpsCfgCertsCountryName 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.8
Certificate details
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..85)  

agAccessHttpsCfgCertsProvinceName 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.9
Certificate details
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..149)  

agAccessHttpsCfgCertsLocalityName 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.10
Certificate details
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..149)  

agAccessHttpsCfgCertsOrganizationName 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.11
Certificate details
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..85)  

agAccessHttpsCfgCertsOrganizationUnitName 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.12
Certificate details
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..85)  

agAccessHttpsCfgCertsEMail 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.13
Certificate details
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..149)  

agAccessHttpsCfgCertsValidityPeriod 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.14
Period for which this certificate is valid
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..3650  

agAccessHttpsCfgCertsDelete 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.15
Delete certificate.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

agAccessHttpsCfgCertsGenerate 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.16
By setting the value to generate(2), the Certicicate will be generated.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), generate(2)  

agAccessHttpsCfgCertsStatus 1.3.6.1.4.1.1872.2.5.1.1.19.4.7.1.17
Shows if the current certificate is generated.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER generated(1), notGenerated(2)  

agAccessSnmp 1.3.6.1.4.1.1872.2.5.1.1.19.5
OBJECT IDENTIFIER    

agAccessSsh 1.3.6.1.4.1.1872.2.5.1.1.19.6
OBJECT IDENTIFIER    

agAccessXml 1.3.6.1.4.1.1872.2.5.1.1.19.7
OBJECT IDENTIFIER    

agAccessSnmpV3 1.3.6.1.4.1.1872.2.5.1.1.19.8
OBJECT IDENTIFIER    

agAccessCurCfgSnmpAccess 1.3.6.1.4.1.1872.2.5.1.1.19.5.1
Set SNMP access control.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER read-only(1), read-write(2), disabled(3)  

agAccessNewCfgSnmpAccess 1.3.6.1.4.1.1872.2.5.1.1.19.5.2
Set SNMP access control.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER read-only(1), read-write(2), disabled(3)  

agAccessCurCfgSnmpReadComm 1.3.6.1.4.1.1872.2.5.1.1.19.5.3
SNMP Read community string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

agAccessNewCfgSnmpReadComm 1.3.6.1.4.1.1872.2.5.1.1.19.5.4
SNMP Read community string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

agAccessCurCfgSnmpWriteComm 1.3.6.1.4.1.1872.2.5.1.1.19.5.5
SNMP Write community string.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

agAccessNewCfgSnmpWriteComm 1.3.6.1.4.1.1872.2.5.1.1.19.5.6
SNMP Write community string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

agAccessCurCfgSnmpTrap1 1.3.6.1.4.1.1872.2.5.1.1.19.5.7
First Snmp Trap Host IP Address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agAccessNewCfgSnmpTrap1 1.3.6.1.4.1.1872.2.5.1.1.19.5.8
First Snmp Trap Host IP Address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agAccessCurCfgSnmpTrap2 1.3.6.1.4.1.1872.2.5.1.1.19.5.9
Second Snmp Trap Host IP Address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agAccessNewCfgSnmpTrap2 1.3.6.1.4.1.1872.2.5.1.1.19.5.10
Second Snmp Trap Host IP Address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

agAccessCurCfgSnmpTrap1Ipv6Addr 1.3.6.1.4.1.1872.2.5.1.1.19.5.11
The IPv6 address of the first Snmp Trap Host. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agAccessNewCfgSnmpTrap1Ipv6Addr 1.3.6.1.4.1.1872.2.5.1.1.19.5.12
The IPv6 address of the first Snmp Trap Host. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agAccessCurCfgSnmpTrap2Ipv6Addr 1.3.6.1.4.1.1872.2.5.1.1.19.5.13
The IPv6 address of the first Snmp Trap Host. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agAccessNewCfgSnmpTrap2Ipv6Addr 1.3.6.1.4.1.1872.2.5.1.1.19.5.14
The IPv6 address of the first Snmp Trap Host. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

agAccessCurCfgSshPort 1.3.6.1.4.1.1872.2.5.1.1.19.6.1
Ssh server port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

agAccessNewCfgSshPort 1.3.6.1.4.1.1872.2.5.1.1.19.6.2
Ssh server port number.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

agAccessCurCfgSshV1 1.3.6.1.4.1.1872.2.5.1.1.19.6.3
Enable or disable SSH V1 Support.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agAccessNewCfgSshV1 1.3.6.1.4.1.1872.2.5.1.1.19.6.4
Enable or disable SSH V1 Support.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agAccessCurCfgSshScp 1.3.6.1.4.1.1872.2.5.1.1.19.6.5
Enable or disable SCP apply and save.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agAccessNewCfgSshScp 1.3.6.1.4.1.1872.2.5.1.1.19.6.6
Enable or disable SCP apply and save.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agAccessCurCfgSshState 1.3.6.1.4.1.1872.2.5.1.1.19.6.7
Enable or disable SSH Server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agAccessNewCfgSshState 1.3.6.1.4.1.1872.2.5.1.1.19.6.8
Enable or disable SSH Server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgXMLCfgState 1.3.6.1.4.1.1872.2.5.1.1.19.7.1
Enable or disable XML config access.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agNewCfgXMLCfgState 1.3.6.1.4.1.1872.2.5.1.1.19.7.2
Enable or disable XML config access.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCfgXMLCertExpire 1.3.6.1.4.1.1872.2.5.1.1.19.7.3
Certificate expire.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

agCfgXMLCertSubjectCountry 1.3.6.1.4.1.1872.2.5.1.1.19.7.4
Certificate subject country.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..85)  

agCfgXMLCertSubjectState 1.3.6.1.4.1.1872.2.5.1.1.19.7.5
Certificate subject state.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..149)  

agCfgXMLCertSubjectLocality 1.3.6.1.4.1.1872.2.5.1.1.19.7.6
Certificate subject locality.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..149)  

agCfgXMLCertSubjectOrg 1.3.6.1.4.1.1872.2.5.1.1.19.7.7
Certificate subject organization.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..85)  

agCfgXMLCertSubjectOrgUnit 1.3.6.1.4.1.1872.2.5.1.1.19.7.8
Certificate subject organization unit.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..85)  

agCfgXMLCertSubjectCommonName 1.3.6.1.4.1.1872.2.5.1.1.19.7.9
Certificate subject common name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..85)  

agCfgXMLCertSubjectEmail 1.3.6.1.4.1.1872.2.5.1.1.19.7.10
Certificate subject email.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..149)  

agCfgXMLCertSignatureAlg 1.3.6.1.4.1.1872.2.5.1.1.19.7.11
Signature algorithm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agCfgXMLClientCertName 1.3.6.1.4.1.1872.2.5.1.1.19.7.12
Certificate Name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

agCfgXMLClientCertDelete 1.3.6.1.4.1.1872.2.5.1.1.19.7.13
Delete certificate.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

targetAddrCurCfgTable 1.3.6.1.4.1.1872.2.5.1.1.19.8.1
The table of target addresses configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TargetAddrCurCfgEntry

targetAddrCurCfgEntry 1.3.6.1.4.1.1872.2.5.1.1.19.8.1.1
An entry in the target address table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TargetAddrCurCfgEntry  

targetAddrCurCfgIndex 1.3.6.1.4.1.1872.2.5.1.1.19.8.1.1.1
Target Address table Identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

targetAddrCurCfgName 1.3.6.1.4.1.1872.2.5.1.1.19.8.1.1.2
A human readable string representing the name of the target address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

targetAddrCurCfgTransIp 1.3.6.1.4.1.1872.2.5.1.1.19.8.1.1.3
Target transport address IP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

targetAddrCurCfgTransPort 1.3.6.1.4.1.1872.2.5.1.1.19.8.1.1.4
Target transport address port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

targetAddrCurCfgTagList 1.3.6.1.4.1.1872.2.5.1.1.19.8.1.1.5
Tag List.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

targetAddrCurCfgParamsName 1.3.6.1.4.1.1872.2.5.1.1.19.8.1.1.6
The target parameter name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

targetAddrCurCfgTransIpv6 1.3.6.1.4.1.1872.2.5.1.1.19.8.1.1.7
Target transport Ipv6 address.Address should be 16-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

targetAddrCurCfgIpVer 1.3.6.1.4.1.1872.2.5.1.1.19.8.1.1.8
Version of the targer Ip Address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

targetAddrCurCfgTrapBmap 1.3.6.1.4.1.1872.2.5.1.1.19.8.1.1.9
Enable/disable traps for selected features. Traps for selected features in bitmap format. in receiving order: OCTET 1 OCTET 2 OCTET 3 OCTET4 xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx |||| ||||_ gslb |||| ||||__ Ip |||| ||||___ Security |||| ||||___ not used |||| |||__ slb |||| |||___ Port-Mirror |||| |||____ slb_atk |||| |||____ not used |||| ||___ vlan |||| |||___ Isd |||| ||_____ http-err |||| ||_____ not used |||| |____ stp |||| |_____ ntp |||| |______ ospf |||| |______ appsvc ||||______ cli ||||_______ bgp ||||________ ratelim ||||________ Ip6 |||_______ mgmt |||________ vrrp |||_________ Synk-atk |||_________ log-UFDFO ||________ System ||_________ ssh ||__________ web ||__________ not used |_________ Console |__________ filter |___________ Dps |___________ rmon where x : 1 - Trap is Enabled 0 - Trap is Disabled.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

targetAddrNewCfgTable 1.3.6.1.4.1.1872.2.5.1.1.19.8.2
The table of target addresses configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TargetAddrNewCfgEntry

targetAddrNewCfgEntry 1.3.6.1.4.1.1872.2.5.1.1.19.8.2.1
An entry in the target address table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TargetAddrNewCfgEntry  

targetAddrNewCfgIndex 1.3.6.1.4.1.1872.2.5.1.1.19.8.2.1.1
Target Address table Identifier.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

targetAddrNewCfgName 1.3.6.1.4.1.1872.2.5.1.1.19.8.2.1.2
A human readable string representing the name of the target address.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

targetAddrNewCfgTransIp 1.3.6.1.4.1.1872.2.5.1.1.19.8.2.1.3
Target transport address IP.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

targetAddrNewCfgTransPort 1.3.6.1.4.1.1872.2.5.1.1.19.8.2.1.4
Target transport address port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

targetAddrNewCfgTagList 1.3.6.1.4.1.1872.2.5.1.1.19.8.2.1.5
The Tag List.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

targetAddrNewCfgParamsName 1.3.6.1.4.1.1872.2.5.1.1.19.8.2.1.6
The target parameter name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

targetAddrNewCfgEnaTrap 1.3.6.1.4.1.1872.2.5.1.1.19.8.2.1.7
This is an action object to enable Trap to a particular target address. The value specified with this object is number given in this description. 1 - Console, 2 - System, 3 - Mgmt, 4 - Cli ,5 - Stp, 6 - Vlan, 7 - Slb, 8 - Gslb, 9 - Filter, 10 - Ssh, 11 - Vrrp, 12 - Bgp, 13 - Ntp, 16 - Ip, 18 - Web, 19 - Syn-atk, 20 - Tcp Limit, 21 - Ospf, 23 - Slb Attack, 24 - Security, 25 - Rmon, 28 - Ip6, 29 - AppSvc. When read this object, the value '0' is returned always.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER console(1), system(2), mgmt(3), cli(4), stp(5), vlan(6), slb(7), gslb(8), filter(9), ssh(10), vrrp(11), bgp(12), ntp(13), ip(16), web(18), synatk(19), tcplim(20), ospf(21), slbatk(23), security(24), rmon(25), ip6(28), appsvc(29)  

targetAddrNewCfgDisTrap 1.3.6.1.4.1.1872.2.5.1.1.19.8.2.1.8
This is an action object to disable Trap to a particular target address. The value specified with this object is number given in this description. 1 - Console, 2 - System, 3 - Mgmt, 4 - Cli ,5 - Stp, 6 - Vlan, 7 - Slb, 8 - Gslb, 9 - Filter, 10 - Ssh, 11 - Vrrp, 12 - Bgp, 13 - Ntp, 16 - Ip, 18 - Web, 19 - Syn-atk, 20 - Tcp Limit, 21 - Ospf, 23 - Slb Attack, 24 - Security, 25 - Rmon, 28 - Ip6, 29 - AppSvc. When read this object, the value '0' is returned always.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER console(1), system(2), mgmt(3), cli(4), stp(5), vlan(6), slb(7), gslb(8), filter(9), ssh(10), vrrp(11), bgp(12), ntp(13), ip(16), web(18), synatk(19), tcplim(20), ospf(21), slbatk(23), security(24), rmon(25), ip6(28), appsvc(29)  

targetAddrNewCfgDelete 1.3.6.1.4.1.1872.2.5.1.1.19.8.2.1.9
This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

targetAddrNewCfgTransIpv6 1.3.6.1.4.1.1872.2.5.1.1.19.8.2.1.10
Target transport Ipv6 address. Address should be 16-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

targetAddrNewCfgIpVer 1.3.6.1.4.1.1872.2.5.1.1.19.8.2.1.11
Version of the targer Ip Address.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2)  

targetAddrNewCfgTrapBmap 1.3.6.1.4.1.1872.2.5.1.1.19.8.2.1.12
Enable/disable traps for selected features. Traps for selected features in bitmap format. in receiving order: OCTET 1 OCTET 2 OCTET 3 OCTET4 xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx |||| ||||_ gslb |||| ||||__ Ip |||| ||||___ Security |||| ||||___ not used |||| |||__ slb |||| |||___ Port-Mirror |||| |||____ slb_atk |||| |||____ not used |||| ||___ vlan |||| |||___ Isd |||| ||_____ http-err |||| ||_____ not used |||| |____ stp |||| |_____ ntp |||| |______ ospf |||| |______ appsvc ||||______ cli ||||_______ bgp ||||________ ratelim ||||________ Ip6 |||_______ mgmt |||________ vrrp |||_________ Synk-atk |||_________ log-UFDFO ||________ System ||_________ ssh ||__________ web ||__________ not used |_________ Console |__________ filter |___________ Dps |___________ rmon where x : 1 - Trap is Enabled 0 - Trap is Disabled.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

agAccessCurCfgSnmpV1V2Access 1.3.6.1.4.1.1872.2.5.1.1.19.8.3
Enable or disable V1/V2 access in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agAccessNewCfgSnmpV1V2Access 1.3.6.1.4.1.1872.2.5.1.1.19.8.4
Enable or disable V1/V2 access in the new configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agCurCfgThresholdInterval 1.3.6.1.4.1.1872.2.5.1.1.23.1
Threshold detection interval.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..1440  

agNewCfgThresholdInterval 1.3.6.1.4.1.1872.2.5.1.1.23.2
Threshold detection interval.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1440  

agCurCfgThresholdThrput 1.3.6.1.4.1.1872.2.5.1.1.23.3
Throughput license alert threshold.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..99  

agNewCfgThresholdThrput 1.3.6.1.4.1.1872.2.5.1.1.23.4
Throughput license alert threshold.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..99  

agCurCfgThresholdSSLCps 1.3.6.1.4.1.1872.2.5.1.1.23.5
SSL CPS license percentage for threshold alert.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..99  

agNewCfgThresholdSSLCps 1.3.6.1.4.1.1872.2.5.1.1.23.6
SSL CPS license percentage for threshold alert.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..99  

agCurCfgThresholdCompress 1.3.6.1.4.1.1872.2.5.1.1.23.7
Compression license percentage for threshold alert.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..99  

agNewCfgThresholdCompress 1.3.6.1.4.1.1872.2.5.1.1.23.8
Compression license percentage for threshold alert.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..99  

licCompanyName 1.3.6.1.4.1.1872.2.5.1.1.21.1
Company Name Detalis.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

licSwitchLocation 1.3.6.1.4.1.1872.2.5.1.1.21.2
Switch Location Details.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

licContact 1.3.6.1.4.1.1872.2.5.1.1.21.3
Contact Details.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

licCookie 1.3.6.1.4.1.1872.2.5.1.1.21.4
PBind Cookie Configuration.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

agSnmpErrorRequestId 1.3.6.1.4.1.1872.2.5.1.1.22.1
The requestId of the request which caused the last error.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

agSnmpErrorTbTable 1.3.6.1.4.1.1872.2.5.1.1.22.2
Table containing the list of errors occured
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgSnmpErrorTbEntry

agSnmpErrorTbEntry 1.3.6.1.4.1.1872.2.5.1.1.22.2.1
The row definition for this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgSnmpErrorTbEntry  

agSnmpErrorTbRequestId 1.3.6.1.4.1.1872.2.5.1.1.22.2.1.1
This variable indicates the requestId of the request which caused the error.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

agSnmpErrorTbVarId 1.3.6.1.4.1.1872.2.5.1.1.22.2.1.2
This variable indicates the variable Oid
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

agSnmpErrorTbDescription 1.3.6.1.4.1.1872.2.5.1.1.22.2.1.3
This variable indicates the description of the error
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

agSnmpErrorTbErrorIndex 1.3.6.1.4.1.1872.2.5.1.1.22.2.1.4
This variable indicates the index of the field in the PDU which caused the error (start at 1)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

agSnmpErrorTbType 1.3.6.1.4.1.1872.2.5.1.1.22.2.1.5
This variable indicates the type of error.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok(0), application(1), internalRange(2), internalGeneral(3)  

agSnmpErrorTbStatus 1.3.6.1.4.1.1872.2.5.1.1.22.2.1.6
This variable indicates the status of error.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok(0), tooBig(1), noSuchName(2), badValue(3), readOnly(4), genErr(5), noAccess(6), wrongType(7), wrongLength(8), wrongEncoding(9), wrongValue(10), noCreation(11), inconsitentValue(12), resourceUnavailable(13), commitFailed(14), undoFailed(15), authorizationErr(16), notWritable(17), inconsitentName(18), lastErr(19)  

agSnmpErrorTbFieldInEntry 1.3.6.1.4.1.1872.2.5.1.1.22.2.1.7
This variable indicates the index of the field in an entry (0 for scalar)
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

agSnmpErrorTbTime 1.3.6.1.4.1.1872.2.5.1.1.22.2.1.8
This variable indicates the time the error occurred, the time will be in the format hh:mm:ss
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(9)  

agSnmpErrorTbDate 1.3.6.1.4.1.1872.2.5.1.1.22.2.1.9
This variable indicates the time the error occurred, the date will be in the format dd/mm/yyyy
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(11)  

pktStatsAllocs 1.3.6.1.4.1.1872.2.5.1.2.1.1
Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pktStatsFrees 1.3.6.1.4.1.1872.2.5.1.2.1.2
Total number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pktStatsAllocFails 1.3.6.1.4.1.1872.2.5.1.2.1.3
Total number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pktStatsMediums 1.3.6.1.4.1.1872.2.5.1.2.1.4
Total number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

pktStatsJumbos 1.3.6.1.4.1.1872.2.5.1.2.1.5
Total number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

pktStatsSmalls 1.3.6.1.4.1.1872.2.5.1.2.1.6
Total number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

pktStatsMediumsHiWatermark 1.3.6.1.4.1.1872.2.5.1.2.1.7
The highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pktStatsJumbosHiWatermark 1.3.6.1.4.1.1872.2.5.1.2.1.8
The highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pktStatsSmallsHiWatermark 1.3.6.1.4.1.1872.2.5.1.2.1.9
The highest number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

pktStatsDiscards 1.3.6.1.4.1.1872.2.5.1.2.1.10
The total number of packets which were chosen to be discarded because the number of buffers available in the packet buffer pool is low.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mpCpuStatsUtil1Second 1.3.6.1.4.1.1872.2.5.1.2.2.1
The utilization of MP CPU over 1 second. It shows the percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mpCpuStatsUtil4Seconds 1.3.6.1.4.1.1872.2.5.1.2.2.2
The utilization of MP CPU over 4 seconds. It shows the percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mpCpuStatsUtil64Seconds 1.3.6.1.4.1.1872.2.5.1.2.2.3
The utilization of MP CPU over 64 seconds. It shows the percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portStatsTable 1.3.6.1.4.1.1872.2.5.1.2.3.1
The table of port statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortStatsTableEntry

portStatsTableEntry 1.3.6.1.4.1.1872.2.5.1.2.3.1.1
A row in the port stats table.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortStatsTableEntry  

portStatsIndx 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.1
The port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portStatsPhyIfInOctets 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.2
The total number of octets received on the interface, including framing characters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

portStatsPhyIfInUcastPkts 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.3
The number of subnetwork-unicast packets delivered to a higher-layer protocol.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

portStatsPhyIfInNUcastPkts 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.4
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

portStatsPhyIfInDiscards 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.5
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsPhyIfInErrors 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.6
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsPhyIfInUnknownProtos 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.7
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsPhyIfOutOctets 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.8
The total number of octets transmitted out of the interface, including framing characters.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

portStatsPhyIfOutUcastPkts 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.9
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

portStatsPhyIfOutNUcastPkts 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.10
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

portStatsPhyIfOutDiscards 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.11
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsPhyIfOutErrors 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.12
The number of outbound packets that could not be transmitted because of errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsPhyIfOutQLen 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.13
The length of the output packet queue (in packets).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

portStatsPhyIfInBroadcastPkts 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.14
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

portStatsPhyIfOutBroadcastPkts 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.15
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

portStatsClear 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.16
Setting this value to clear(2) clears the stats for this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), clear(2)  

portStatsPhyIfInMcastPkts 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.17
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. .
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

portStatsPhyIfOutMcastPkts 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.18
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

portMirrorStatsTable 1.3.6.1.4.1.1872.2.5.1.2.11.1
The table of port mirror statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortMirrorStatsTableEntry

portMirrorStatsTableEntry 1.3.6.1.4.1.1872.2.5.1.2.11.1.1
A row in the port mirror stats table.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortMirrorStatsTableEntry  

portMirrorStatsIndx 1.3.6.1.4.1.1872.2.5.1.2.11.1.1.1
The port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portMirrorStatsIngress 1.3.6.1.4.1.1872.2.5.1.2.11.1.1.2
Specifies number of bytes mirrored in ingress port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portMirrorStatsEgress 1.3.6.1.4.1.1872.2.5.1.2.11.1.1.3
Specifies number of bytes mirrored in egress port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portMirrorClear 1.3.6.1.4.1.1872.2.5.1.2.11.2
OBJECT IDENTIFIER    

portMirrorStatsClear 1.3.6.1.4.1.1872.2.5.1.2.11.2.1
Setting this value to clear(2) clears the mirror stats.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), clear(2)  

peakThroughputUsage 1.3.6.1.4.1.1872.2.5.1.2.12.1
Peak throughput of ports in bits per second.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

curThroughputUsage 1.3.6.1.4.1.1872.2.5.1.2.12.2
Current throughput of ports in bits per second.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

peakSslCapUsage 1.3.6.1.4.1.1872.2.5.1.2.12.3
Peak SSL capacity usage in CPS.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

curSslCapUsage 1.3.6.1.4.1.1872.2.5.1.2.12.4
Current SSL capacity usage in CPS.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

peakComprsnCapUsage 1.3.6.1.4.1.1872.2.5.1.2.12.5
Peak compression capacity usage in Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

curComprsnCapUsage 1.3.6.1.4.1.1872.2.5.1.2.12.6
Current compression capacity usage in Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

clearCapacityUsageStats 1.3.6.1.4.1.1872.2.5.1.2.12.7
Setting this value to clear(2) clears the capacity usage stats.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), clear(2)  

mpMemStatsTotal 1.3.6.1.4.1.1872.2.5.1.2.8.1
The total memory of MP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mpMemStatsFree 1.3.6.1.4.1.1872.2.5.1.2.8.3
The free memory of MP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ntpPrimaryServerReqSent 1.3.6.1.4.1.1872.2.5.1.2.9.1
The total number of NTP requests sent to Primary NTP Server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ntpPrimaryServerRespRcvd 1.3.6.1.4.1.1872.2.5.1.2.9.2
The total number of NTP responses received from Primary NTP Server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ntpPrimaryServerUpdates 1.3.6.1.4.1.1872.2.5.1.2.9.3
The total number of NTP Updates by Primary NTP Server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ntpSecondaryServerReqSent 1.3.6.1.4.1.1872.2.5.1.2.9.4
The total number of NTP requests sent to Secondary NTP Server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ntpSecondaryServerRespRcvd 1.3.6.1.4.1.1872.2.5.1.2.9.5
The total number of NTP responses received from Secondary NTP Server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ntpSecondaryServerUpdates 1.3.6.1.4.1.1872.2.5.1.2.9.6
The total number of NTP Updates by Secondary NTP Server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ntpLastUpdateServer 1.3.6.1.4.1.1872.2.5.1.2.9.7
The type of ntp server updated last time.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), primary(1), secondary(2)  

ntpLastUpdateTime 1.3.6.1.4.1.1872.2.5.1.2.9.8
The last time updated by ntp server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..127)  

ntpClearStats 1.3.6.1.4.1.1872.2.5.1.2.9.9
Setting this value to clear(2) clears the stats for ntp.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), clear(2)  

ntpSystemCurrentTime 1.3.6.1.4.1.1872.2.5.1.2.9.10
The current system time.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..127)  

snmpClearStats 1.3.6.1.4.1.1872.2.5.1.2.7.1
Setting this to clear(2) results in clearing the SNMP statistics.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), clear(2)  

agDiffState 1.3.6.1.4.1.1872.2.5.1.3.4.2
When this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation is completed. Setting the value to diff(1), will start a new diff operation Diff compares the new configuration with the current configuration and shows the pending configuration changes. Setting the value to flashdiff(1), will start a new diff operation. flashdiff compares new configuration with the flash configuration. To read the configuration changes use the agDiffTable once the state of this variable returns complete. Once the agDiffTable is read the state should be set back to 'idle' which frees the diff buffer and others can issue a diff command via SNMP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER diff(1), flashdiff(2), idle(3), inprogress(4), complete(5)  

agDiffTableSize 1.3.6.1.4.1.1872.2.5.1.3.4.3
The number of strings in the diff table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agDiffTable 1.3.6.1.4.1.1872.2.5.1.3.4.4
The table of diff strings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgDiffTableEntry

agDiffTableEntry 1.3.6.1.4.1.1872.2.5.1.3.4.4.1
An entry in the diff table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgDiffTableEntry  

agDiffIndex 1.3.6.1.4.1.1872.2.5.1.3.4.4.1.1
The table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agDiffString 1.3.6.1.4.1.1872.2.5.1.3.4.4.1.2
A string in the diff table.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

agCfgDumpState 1.3.6.1.4.1.1872.2.5.1.3.5.2
When this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation is completed. Setting the value to dump(1), will start a new dump operation Dump will show the current configuration. To read the configuration dump use the agCfgDumpTable once the state of this variable returns complete. Once the agCfgDumpTable is read the state should be set back to 'idle' which frees the dump buffer and others can issue a dump command via SNMP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dump(1), idle(2), inprogress(3), complete(4)  

agCfgDumpTableSize 1.3.6.1.4.1.1872.2.5.1.3.5.3
The number of strings in the dump table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agCfgDumpTable 1.3.6.1.4.1.1872.2.5.1.3.5.4
The table of dump strings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgCfgDumpTableEntry

agCfgDumpTableEntry 1.3.6.1.4.1.1872.2.5.1.3.5.4.1
An entry in the dump table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgCfgDumpTableEntry  

agCfgDumpIndex 1.3.6.1.4.1.1872.2.5.1.3.5.4.1.1
The table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agCfgDumpString 1.3.6.1.4.1.1872.2.5.1.3.5.4.1.2
A string in the dump table.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

spGAStatsCpuUtilTable 1.3.6.1.4.1.1872.2.5.1.2.13.1
The table of SP CPU utilization shown in GA.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SpGAStatsCpuUtilTableEntry

spGAStatsCpuUtilTableEntry 1.3.6.1.4.1.1872.2.5.1.2.13.1.1
A row in the SP CPU utilization table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SpGAStatsCpuUtilTableEntry  

spGAStatsCpuUtilSpIndex 1.3.6.1.4.1.1872.2.5.1.2.13.1.1.1
The SP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

spGAStatsCpuUtilvADC 1.3.6.1.4.1.1872.2.5.1.2.13.1.1.2
vADC's running in this core.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

spGAStatsCpuUtil1Second 1.3.6.1.4.1.1872.2.5.1.2.13.1.1.3
The utilization of this SP over 1 second. It shows the percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

spGAStatsCpuUtil4Seconds 1.3.6.1.4.1.1872.2.5.1.2.13.1.1.4
The utilization of this SP over 4 seconds. It shows the percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

spGAStatsCpuUtil64Seconds 1.3.6.1.4.1.1872.2.5.1.2.13.1.1.5
The utilization of this SP over 64 seconds. It shows the percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

spStatsCpuUtilTable 1.3.6.1.4.1.1872.2.5.1.2.4.1
The table of SP CPU utilization.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SpStatsCpuUtilTableEntry

spStatsCpuUtilTableEntry 1.3.6.1.4.1.1872.2.5.1.2.4.1.1
A row in the SP CPU utilization table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SpStatsCpuUtilTableEntry  

spStatsCpuUtilSpIndex 1.3.6.1.4.1.1872.2.5.1.2.4.1.1.1
The SP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

spStatsCpuUtil1Second 1.3.6.1.4.1.1872.2.5.1.2.4.1.1.2
The utilization of this SP over 1 second. It shows the percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

spStatsCpuUtil4Seconds 1.3.6.1.4.1.1872.2.5.1.2.4.1.1.3
The utilization of this SP over 4 seconds. It shows the percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

spStatsCpuUtil64Seconds 1.3.6.1.4.1.1872.2.5.1.2.4.1.1.4
The utilization of this SP over 64 seconds. It shows the percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

spMaintStatsTable 1.3.6.1.4.1.1872.2.5.1.2.4.2
The table of SP maintenance statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SpMaintStatsTableEntry

spMaintStatsTableEntry 1.3.6.1.4.1.1872.2.5.1.2.4.2.1
A row in the SP maintenance statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SpMaintStatsTableEntry  

spMaintStatsSpIndex 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.1
The SP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

spMaintStatsPfdbFreeEmpty 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.2
The number of times the attempts were made to add entries to an already full FDB.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsResolveErrNoddw 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.3
The number of times MAC address resolution failed because there were no DMA descriptors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsLearnErrNoddw 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.4
The number of times MAC address learn failed because there were no DMA descriptors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsAgeMPNoddw 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.5
The number of times MAC address aging failed because there were no DMA descriptors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsDeleteMiss 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.6
The number of times MAC address could not be found.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetErrorsMP 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.7
The number of receive letter errors from MP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetErrorsSP1 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.8
The number of receive letter errors from SP1. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetErrorsSP2 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.9
The number of receive letter errors from SP2. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetErrorsSP3 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.10
The number of receive letter errors from SP3. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetErrorsSP4 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.11
The number of receive letter errors from SP4. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetFailsMP 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.12
The number of send letter failures to MP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetFailsSP1 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.13
The number of send letter failures to SP1. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetFailsSP2 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.14
The number of send letter failures to SP2. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetFailsSP3 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.15
The number of send letter failures to SP3. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetFailsSP4 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.16
The number of send letter failures to SP4. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetSuccessMP 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.17
The number of receive letter success from MP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetSuccessSP1 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.18
The number of receive letter success from SP1. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetSuccessSP2 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.19
The number of receive letter success from SP2. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetSuccessSP3 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.20
The number of receive letter success from SP3. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetSuccessSP4 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.21
The number of receive letter success from SP4. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetSuccessMP 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.22
The number of send letter success to MP.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetSuccessSP1 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.23
The number of send letter success to SP1. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetSuccessSP2 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.24
The number of send letter success to SP2. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetSuccessSP3 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.25
The number of send letter success to SP3. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetSuccessSP4 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.26
The number of send letter success to SP4. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRateLimitArpDrops 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.27
The total number of ARP packets dropped due to rate limiting.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRateLimitIcmpDrops 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.28
The total number of ICMP packets are dropped due to rate limiting.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRateLimitTcpDrops 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.29
The total number of TCP packets are dropped due to rate limiting.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRateLimitUdpDrops 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.30
The total number of UDP packets are dropped due to rate limiting.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetErrorsSP5 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.31
The number of receive letter errors from SP5. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetErrorsSP6 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.32
The number of receive letter errors from SP6. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetErrorsSP7 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.33
The number of receive letter errors from SP7. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetFailsSP5 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.34
The number of send letter failures to SP5. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetFailsSP6 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.35
The number of send letter failures to SP6. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetFailsSP7 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.36
The number of send letter failures to SP7. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetSuccessSP5 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.37
The number of receive letter success from SP5. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetSuccessSP6 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.38
The number of receive letter success from SP6. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsRecvLetSuccessSP7 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.39
The number of receive letter success from SP7. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetSuccessSP5 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.40
The number of send letter success to SP5. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetSuccessSP6 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.41
The number of send letter success to SP6. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMaintStatsSendLetSuccessSP7 1.3.6.1.4.1.1872.2.5.1.2.4.2.1.42
The number of send letter success to SP7. If the current table index is the same as the SP number then a value of 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

spMemUsageStatsTable 1.3.6.1.4.1.1872.2.5.1.2.4.4
The table of SP memory statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SpMemUsageStatsTableEntry

spMemUsageStatsTableEntry 1.3.6.1.4.1.1872.2.5.1.2.4.4.1
A row in the SP memory statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SpMemUsageStatsTableEntry  

spMemUsageStatsIndex 1.3.6.1.4.1.1872.2.5.1.2.4.4.1.1
The SP index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

spMemUsageStatsCurrentMemory 1.3.6.1.4.1.1872.2.5.1.2.4.4.1.2
The current memory usage of SP in KiloBytes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

spMemUsageStatsHiWaterMark 1.3.6.1.4.1.1872.2.5.1.2.4.4.1.3
The high watermark of memory usage in KiloBytes.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mgmtStatsRxpackets 1.3.6.1.4.1.1872.2.5.1.2.5.1
Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmtStatsRxErrors 1.3.6.1.4.1.1872.2.5.1.2.5.2
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmtStatsRxDropped 1.3.6.1.4.1.1872.2.5.1.2.5.3
The number of inbound packets that were dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmtStatsRxOverruns 1.3.6.1.4.1.1872.2.5.1.2.5.4
The number of data overruns over this link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmtStatsRxFrame 1.3.6.1.4.1.1872.2.5.1.2.5.5
The number of frames received on this link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmtStatsTxpackets 1.3.6.1.4.1.1872.2.5.1.2.5.6
Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmtStatsTxErrors 1.3.6.1.4.1.1872.2.5.1.2.5.7
The number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmtStatsTxDropped 1.3.6.1.4.1.1872.2.5.1.2.5.8
The number of outbound packets that were dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmtStatsTxOverruns 1.3.6.1.4.1.1872.2.5.1.2.5.9
The number of data overruns over this link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmtStatsTxCarrier 1.3.6.1.4.1.1872.2.5.1.2.5.10
The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmtStatsTxCollisions 1.3.6.1.4.1.1872.2.5.1.2.5.11
The number of collisions on this outbound segment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmtStatsTxQueueLen 1.3.6.1.4.1.1872.2.5.1.2.5.12
The length of the TCP transmit queue.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmtStatsRxBytes 1.3.6.1.4.1.1872.2.5.1.2.5.13
The total number of bytes received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmtStatsRxMulticast 1.3.6.1.4.1.1872.2.5.1.2.5.14
The total number of multicast packets received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmtStatsTxBytes 1.3.6.1.4.1.1872.2.5.1.2.5.15
The total number of bytes transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipAclBogonInfo 1.3.6.1.4.1.1872.2.5.1.3.7.1
OBJECT IDENTIFIER    

ipAclBogonInfoTableMaxSize 1.3.6.1.4.1.1872.2.5.1.3.7.1.1
The number of bogon IPs in IP ACL table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipAclBogonInfoTable 1.3.6.1.4.1.1872.2.5.1.3.7.1.2
The table of bogons.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAclBogonInfoTableEntry

ipAclBogonInfoTableEntry 1.3.6.1.4.1.1872.2.5.1.3.7.1.2.1
An entry in the bogon IP ACL table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAclBogonInfoTableEntry  

ipAclBogonInfoIndex 1.3.6.1.4.1.1872.2.5.1.3.7.1.2.1.1
The table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipAclBogonInfoIp 1.3.6.1.4.1.1872.2.5.1.3.7.1.2.1.2
Bogon IP Address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipAclBogonInfoMask 1.3.6.1.4.1.1872.2.5.1.3.7.1.2.1.3
Mask for the bogon IP.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

mgmtPortInfoSpeed 1.3.6.1.4.1.1872.2.5.1.3.6.1
The current operational speed of the management port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER mbs10(1), mbs100(2), any(3)  

mgmtPortInfoMode 1.3.6.1.4.1.1872.2.5.1.3.6.2
The current operational mode of the management port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER full-duplex(1), half-duplex(2), any(3)  


hwMainBoardNumber 1.3.6.1.4.1.1872.2.5.1.3.1.6
The hardware main board number of the Alteon Switch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

hwMainBoardRevision 1.3.6.1.4.1.1872.2.5.1.3.1.7
The hardware main board revision. If the revision is not available, a zero length string should be returned.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

hwEthernetBoardNumber 1.3.6.1.4.1.1872.2.5.1.3.1.8
The hardware ethernet board number of the Alteon Switch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

hwEthernetBoardRevision 1.3.6.1.4.1.1872.2.5.1.3.1.9
The hardware ethernet board revision. If the revision is not available, a zero length string should be returned.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

hwMACAddress 1.3.6.1.4.1.1872.2.5.1.3.1.13
The MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..48)  

hwFABNumber 1.3.6.1.4.1.1872.2.5.1.3.1.17
The FAB number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..48)  

hwSerialNumber 1.3.6.1.4.1.1872.2.5.1.3.1.18
The switch serial number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..48)  

hwManufacturingDate 1.3.6.1.4.1.1872.2.5.1.3.1.19
The date of manufacturing.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..48)  

hwPLDFirmwareVersion 1.3.6.1.4.1.1872.2.5.1.3.1.21
The PLD Firmware Version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..48)  

hwTemperatureSensor1 1.3.6.1.4.1.1872.2.5.1.3.1.22
The temperature sensor 1.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..48)  

hwTemperatureSensor2 1.3.6.1.4.1.1872.2.5.1.3.1.23
The temperature sensor 2.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..48)  

hwDRAMSize 1.3.6.1.4.1.1872.2.5.1.3.1.25
DRAM Size
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwFlashSize 1.3.6.1.4.1.1872.2.5.1.3.1.26
Flash Size
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwNumberOfHD 1.3.6.1.4.1.1872.2.5.1.3.1.27
The number of hard drives.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwTemperatureThreshold 1.3.6.1.4.1.1872.2.5.1.3.1.28
OBJECT IDENTIFIER    

hwTemperatureWarningThresholdGet 1.3.6.1.4.1.1872.2.5.1.3.1.28.1
get the temperature warning threshold
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwTemperatureShutdownThresholdGet 1.3.6.1.4.1.1872.2.5.1.3.1.28.2
get the temperature shutdown threshold
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwTemperatureThresholdStatusCPU1Get 1.3.6.1.4.1.1872.2.5.1.3.1.28.3
get the threshold status of CPU1 warning - if the warning threshold exceeded critical - if the shutdown threshold exceeded
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), warning(2), critical(3)  

hwTemperatureThresholdStatusCPU2Get 1.3.6.1.4.1.1872.2.5.1.3.1.28.4
get the threshold status of CPU2 warning - if the warning threshold exceeded critical - if the shutdown threshold exceeded
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), warning(2), critical(3)  

hwDualPowerSupplyParams 1.3.6.1.4.1.1872.2.5.1.3.1.29
OBJECT IDENTIFIER    

hwPowerSupplyTrapStatus 1.3.6.1.4.1.1872.2.5.1.3.1.29.1
Enables the user to disable the sending of traps for the power supply status
Status: current Access: read-write
OBJECT-TYPE    
  FeatureStatus  

hwPowerSupplyStatus 1.3.6.1.4.1.1872.2.5.1.3.1.29.2
The status of the power supply
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER singlePowerSupplyOk(1), firstPowerSupplyFailed(2), secondPowerSupplyFailed(3), doublePowerSupplyOk(4), unknownPowerSupplyFailed(5)  

hwVersion 1.3.6.1.4.1.1872.2.5.1.3.1.30
Defines the HW version of the product.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

portStatsPerSecTable 1.3.6.1.4.1.1872.2.5.1.2.3.2
Table for the device ports statistics per second
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortStatsPerSecEntry

portStatsPerSecEntry 1.3.6.1.4.1.1872.2.5.1.2.3.2.1
The row definition for this table
Status: current Access: not-accessible
OBJECT-TYPE    
  PortStatsPerSecEntry  

portStatsPortNumber 1.3.6.1.4.1.1872.2.5.1.2.3.2.1.1
The port number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portStatsInOctetsPerSec 1.3.6.1.4.1.1872.2.5.1.2.3.2.1.2
Amount of input data in octets in the last sec
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

portStatsInPktsPerSec 1.3.6.1.4.1.1872.2.5.1.2.3.2.1.3
Amount of input data in packets in the last sec
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsInDiscardsPerSec 1.3.6.1.4.1.1872.2.5.1.2.3.2.1.4
amount of input data that got discarded in the last sec
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsInErrorsPerSec 1.3.6.1.4.1.1872.2.5.1.2.3.2.1.5
Amount of input data that have error in the last sec
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsOutOctetsPerSec 1.3.6.1.4.1.1872.2.5.1.2.3.2.1.6
Amount of output data in octets in the last sec
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

portStatsOutPktsPerSec 1.3.6.1.4.1.1872.2.5.1.2.3.2.1.7
Amount of output data in packets in the last sec
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsOutDiscardsPerSec 1.3.6.1.4.1.1872.2.5.1.2.3.2.1.8
Amount of output data that got discarded in the last sec
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsOutErrorsPerSec 1.3.6.1.4.1.1872.2.5.1.2.3.2.1.9
Amount of output data that have error in the last sec
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

portStatsTotalPerSec 1.3.6.1.4.1.1872.2.5.1.2.3.3
OBJECT IDENTIFIER    

portStatsTotalInOctetsPerSec 1.3.6.1.4.1.1872.2.5.1.2.3.3.1
Amount of total input in octets on all ports per second
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

agVisionDriverActiveName 1.3.6.1.4.1.1872.2.5.1.1.1.71
The name of the active vision driver stored on the device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..100)  

agVisionDriverRestoreFromBackup 1.3.6.1.4.1.1872.2.5.1.1.1.72
Restores the backup vision driver.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER activate(1)  

agentTimeInfo 1.3.6.1.4.1.1872.2.5.1.3.11
OBJECT IDENTIFIER    

agSwitchUpTime 1.3.6.1.4.1.1872.2.5.1.3.11.1
Time since the switch is up in DisplayString, sysUpTime also provides the same data in TimeTicks.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..127)  

agSwitchConfigChangeTime 1.3.6.1.4.1.1872.2.5.1.3.11.2
The value of sysUpTime at the last configuration change.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

agSwitchConfigChangeTimeStr 1.3.6.1.4.1.1872.2.5.1.3.11.3
Last configuration change time same as agSwitchConfigChangeTime but in user readable format.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..127)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor