ALTIGA-GENERAL-STATS-MIB

File: ALTIGA-GENERAL-STATS-MIB.mib (4479 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF ALTIGA-MIB
ALTIGA-GLOBAL-REG

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Gauge32 Counter32 Integer32
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
alStatsGeneral alGeneralGroup alGeneralMibModule

Defined Values

altigaGeneralStatsMibModule 1.3.6.1.4.1.3076.1.1.30.2
The Altiga General Statistics MIB models counters and objects that are of management interest. Acronyms The following acronyms are used in this document: AVP: Attribute/Value Pair CLID: Calling Line ID DNIS: Dialed Number Identification Service L2TP: Layer 2 Tunnel Protocol LAC: L2TP Access Concentrator LNS: L2TP Network Server RWS: Receive Window Size
MODULE-IDENTITY    

alStatsGeneralGlobal 1.3.6.1.4.1.3076.2.1.2.25.1
OBJECT IDENTIFIER    

alGeneralTime 1.3.6.1.4.1.3076.2.1.2.25.1.1
The current time on the box, represented as a time_t. In 1.2, this was the box's local time. After 1.2, it was corrected to represent UTC (which is what it is supposed to be). So all boxes should have this be the same value +/- a few seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

alGeneralGaugeCpuUtil 1.3.6.1.4.1.3076.2.1.2.25.1.2
The value of the CPU Utilization gauge which indicates percentage of CPU utilized.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

alGeneralGaugeActiveSessions 1.3.6.1.4.1.3076.2.1.2.25.1.3
The value of the Active Sessions gauge which indicates the percentage of total permitted session that are active.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

alGeneralGaugeThroughput 1.3.6.1.4.1.3076.2.1.2.25.1.4
The value of the Throughput gauge which indicates the percentage of total available throughput in-use.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32 0..100  

alGeneralTimeZone 1.3.6.1.4.1.3076.2.1.2.25.1.5
The time zone configured on the box. Measured in minutes from UTC. e.g. EST = -300.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

altigaGeneralStatsMibConformance 1.3.6.1.4.1.3076.1.1.30.2.1
OBJECT IDENTIFIER    

altigaGeneralStatsMibCompliances 1.3.6.1.4.1.3076.1.1.30.2.1.1
OBJECT IDENTIFIER    

altigaGeneralStatsMibCompliance 1.3.6.1.4.1.3076.1.1.30.2.1.1.1
The compliance statement for agents which implement the Altiga General Statistics MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

altigaGeneralStatsGroup 1.3.6.1.4.1.3076.2.1.1.1.25.2
The objects for general information.
Status: current Access: read-only
OBJECT-GROUP