ALTIGA-L2TP-STATS-MIB

File: ALTIGA-L2TP-STATS-MIB.mib (44761 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
ALTIGA-MIB	ALTIGA-GLOBAL-REG	IF-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
Unsigned32	IpAddress	Counter32
Gauge32	RowStatus	DisplayString
TruthValue	OBJECT-GROUP	MODULE-COMPLIANCE
alStatsL2tp	alL2tpGroup	alL2tpMibModule
InterfaceIndex

Defined Types

AlL2tpStatsTunnelEntry
SEQUENCE
	alL2tpStatsTunnelRowStatus	RowStatus
	alL2tpStatsTunnelPeerIpAddr	IpAddress
	alL2tpStatsTunnelLocalTID	Integer32
	alL2tpStatsTunnelRemoteTID	Integer32
	alL2tpStatsTunnelState	INTEGER
	alL2tpStatsTunnelInitiated	INTEGER
	alL2tpStatsTunnelRemoteHostName	DisplayString
	alL2tpStatsTunnelRemoteVendorName	DisplayString
	alL2tpStatsTunnelRemoteFirmwareRevision	OCTET STRING
	alL2tpStatsTunnelRemoteProtocolVersion	OCTET STRING
	alL2tpStatsTunnelInitialRemoteRWS	Integer32
	alL2tpStatsTunnelBearerCapabilities	INTEGER
	alL2tpStatsTunnelFramingCapabilities	INTEGER
	alL2tpStatsTunnelControlRecvPackets	Counter32
	alL2tpStatsTunnelControlRecvDiscards	Counter32
	alL2tpStatsTunnelControlRecvZLB	Counter32
	alL2tpStatsTunnelControlOutOfSequence	Counter32
	alL2tpStatsTunnelControlOutOfWindow	Counter32
	alL2tpStatsTunnelControlSendPackets	Counter32
	alL2tpStatsTunnelControlSendZLB	Counter32
	alL2tpStatsTunnelControlAckTimeouts	Counter32
	alL2tpStatsTunnelCurrentRemoteRWS	Gauge32
	alL2tpStatsTunnelSendSeq	Integer32
	alL2tpStatsTunnelSendSeqAck	Integer32
	alL2tpStatsTunnelRecvSeq	Integer32
	alL2tpStatsTunnelRecvSeqAck	Integer32
	alL2tpStatsTunnelTotalSessions	Counter32
	alL2tpStatsTunnelFailedSessions	Counter32
	alL2tpStatsTunnelActiveSessions	Gauge32
	alL2tpStatsTunnelLastResultCode	Integer32
	alL2tpStatsTunnelLastErrorCode	Integer32
	alL2tpStatsTunnelLastErrorMessage	DisplayString

AlL2tpStatsSessionEntry
SEQUENCE
	alL2tpStatsSessionRowStatus	RowStatus
	alL2tpStatsSessionIfIndex	InterfaceIndex
	alL2tpStatsSessionTID	Integer32
	alL2tpStatsSessionLocalCID	Integer32
	alL2tpStatsSessionRemoteCID	Integer32
	alL2tpStatsSessionUserName	DisplayString
	alL2tpStatsSessionState	INTEGER
	alL2tpStatsSessionCallType	INTEGER
	alL2tpStatsSessionCallSerialNumber	Unsigned32
	alL2tpStatsSessionTxConnectSpeed	Integer32
	alL2tpStatsSessionRxConnectSpeed	Integer32
	alL2tpStatsSessionCallBearerType	INTEGER
	alL2tpStatsSessionFramingType	INTEGER
	alL2tpStatsSessionPhysChanId	Integer32
	alL2tpStatsSessionDNIS	DisplayString
	alL2tpStatsSessionCLID	DisplayString
	alL2tpStatsSessionSubAddress	DisplayString
	alL2tpStatsSessionPrivateGroupID	DisplayString
	alL2tpStatsSessionProxyLcp	TruthValue
	alL2tpStatsSessionAuthMethod	INTEGER
	alL2tpStatsSessionLocalRWS	Integer32
	alL2tpStatsSessionRemoteInitialRWS	Integer32
	alL2tpStatsSessionRemotePPD	Integer32
	alL2tpStatsSessionSequencingState	INTEGER
	alL2tpStatsSessionRecvOctets	Counter32
	alL2tpStatsSessionRecvPackets	Counter32
	alL2tpStatsSessionRecvDiscards	Counter32
	alL2tpStatsSessionRecvZLB	Counter32
	alL2tpStatsSessionOutSequence	Counter32
	alL2tpStatsSessionOutOfWindow	Counter32
	alL2tpStatsSessionSendOctets	Counter32
	alL2tpStatsSessionSendPackets	Counter32
	alL2tpStatsSessionSendZLB	Counter32
	alL2tpStatsSessionAckTimeouts	Counter32
	alL2tpStatsSessionReassemblyTimeouts	Counter32
	alL2tpStatsSessionCurrentRemoteRWS	Gauge32
	alL2tpStatsSessionSendSeq	Integer32
	alL2tpStatsSessionSendSeqAck	Integer32
	alL2tpStatsSessionSendSeqResets	Counter32
	alL2tpStatsSessionRecvSeq	Integer32
	alL2tpStatsSessionRecvSeqAck	Integer32
	alL2tpStatsSessionRecvSeqResets	Counter32
	alL2tpStatsSessionTunnelPeerIpAddr	IpAddress

Defined Values

altigaL2tpStatsMibModule		1.3.6.1.4.1.3076.1.1.21.2
The Altiga L2TP Statistics MIB models counters and objects that are of management interest for L2TP tunnels. Acronyms The following acronyms are used in this document: AVP: Attribute/Value Pair CLID: Calling Line ID DNIS: Dialed Number Identification Service L2TP: Layer 2 Tunnel Protocol LAC: L2TP Access Concentrator LNS: L2TP Network Server MIB: Management Information Base RWS: Receive Window Size
MODULE-IDENTITY

alStatsL2tpGlobal		1.3.6.1.4.1.3076.2.1.2.16.1
OBJECT IDENTIFIER

alL2tpStatsLocalProtVers		1.3.6.1.4.1.3076.2.1.2.16.1.1
This object describes the protocol version and revision of the local implementation. The first octet contains the protocol version. The second octet contains the protocol revision.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

alL2tpStatsVendorName		1.3.6.1.4.1.3076.2.1.2.16.1.2
This object identifies the Vendor name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alL2tpStatsFirmwareRev		1.3.6.1.4.1.3076.2.1.2.16.1.3
This object defines the firmware revision.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

alL2tpStatsTotalTunnels		1.3.6.1.4.1.3076.2.1.2.16.1.4
This object returns the total number of tunnels that have successfully reached the established state.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsFailedTunnels		1.3.6.1.4.1.3076.2.1.2.16.1.5
This object returns the number of tunnels that failed to reach the established state.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsFailedAuthentications		1.3.6.1.4.1.3076.2.1.2.16.1.6
This object returns the number of failed tunnel connection attempts because the tunnel peer failed authentication.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsActiveTunnels		1.3.6.1.4.1.3076.2.1.2.16.1.7
This object returns the number of tunnels that are currently active.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

alL2tpStatsMaxTunnels		1.3.6.1.4.1.3076.2.1.2.16.1.8
The maximum number of simultaneously active L2TP tunnels since the system was booted.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

alL2tpStatsTotalSessions		1.3.6.1.4.1.3076.2.1.2.16.1.9
This object returns the total number of sessions that have successfully reached the established state.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsFailedSessions		1.3.6.1.4.1.3076.2.1.2.16.1.10
This object returns the number of sessions that failed to reach the established state for this tunnel domain.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsActiveSessions		1.3.6.1.4.1.3076.2.1.2.16.1.11
This object returns the number of sessions that are currently active.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

alL2tpStatsMaxSessions		1.3.6.1.4.1.3076.2.1.2.16.1.12
The maximum number of simultaneously active L2TP sessions since the system was booted.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

alL2tpStatsControlRecvOctets		1.3.6.1.4.1.3076.2.1.2.16.1.13
This object returns the number of control channel octets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsControlRecvPackets		1.3.6.1.4.1.3076.2.1.2.16.1.14
This object returns the number of control packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsControlRecvDiscards		1.3.6.1.4.1.3076.2.1.2.16.1.15
This object returns the number of control packets received that were discarded.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsControlSendOctets		1.3.6.1.4.1.3076.2.1.2.16.1.16
This object returns the number of control channel octets that were transmitted to tunnel endpoints.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsControlSendPackets		1.3.6.1.4.1.3076.2.1.2.16.1.17
This object returns the number of control packets that were transmitted to tunnel endpoints.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsPayloadRecvOctets		1.3.6.1.4.1.3076.2.1.2.16.1.18
This object returns the number of payload channel octets that were received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsPayloadRecvPackets		1.3.6.1.4.1.3076.2.1.2.16.1.19
This object returns the number of payload packets that were received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsPayloadRecvDiscards		1.3.6.1.4.1.3076.2.1.2.16.1.20
This object returns the number of received payload packets that were discarded.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsPayloadSendOctets		1.3.6.1.4.1.3076.2.1.2.16.1.21
This object returns the number of payload channel octets that were transmitted to tunnel peers.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsPayloadSendPackets		1.3.6.1.4.1.3076.2.1.2.16.1.22
This object returns the number of payload packets that were transmitted to tunnel peers.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsTunnelTable		1.3.6.1.4.1.3076.2.1.2.16.2
The L2TP tunnel status and statistics table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AlL2tpStatsTunnelEntry

alL2tpStatsTunnelEntry		1.3.6.1.4.1.3076.2.1.2.16.2.1
An entry in the alL2tpStatsTunnelTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	AlL2tpStatsTunnelEntry

alL2tpStatsTunnelRowStatus		1.3.6.1.4.1.3076.2.1.2.16.2.1.1
The status of this row. Used to terminate the tunnel, cannot be used to create a tunnel.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

alL2tpStatsTunnelPeerIpAddr		1.3.6.1.4.1.3076.2.1.2.16.2.1.2
The peer's IP address for this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

alL2tpStatsTunnelLocalTID		1.3.6.1.4.1.3076.2.1.2.16.2.1.3
This object contains the local tunnel Identifier.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsTunnelRemoteTID		1.3.6.1.4.1.3076.2.1.2.16.2.1.4
This object contains the remote tunnel Identifier.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsTunnelState		1.3.6.1.4.1.3076.2.1.2.16.2.1.5
This field contains the current state of the control tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	tunnelIdle(1), tunnelConnecting(2), tunnelEstablished(3), tunnelDisconnecting(4)

alL2tpStatsTunnelInitiated		1.3.6.1.4.1.3076.2.1.2.16.2.1.6
This object indicates whether the tunnel was initiated locally or by the remote tunnel peer.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	locally(1), remotely(2)

alL2tpStatsTunnelRemoteHostName		1.3.6.1.4.1.3076.2.1.2.16.2.1.7
This object contains the host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle this object should maintain its value from the last time it was connected.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alL2tpStatsTunnelRemoteVendorName		1.3.6.1.4.1.3076.2.1.2.16.2.1.8
This object identifies the vendor name of the peer's L2TP implementation. If the tunnel is idle this object should maintain its value from the last time it was connected.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alL2tpStatsTunnelRemoteFirmwareRevision		1.3.6.1.4.1.3076.2.1.2.16.2.1.9
This object contains the tunnel peer's firmware revision number. If the tunnel is idle this object should maintain its value from the last time it was connected.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

alL2tpStatsTunnelRemoteProtocolVersion		1.3.6.1.4.1.3076.2.1.2.16.2.1.10
This object describes the protocol version and revision of the tunnel peers implementation. The first octet contains the protocol version. The second octet contains the protocol revision.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

alL2tpStatsTunnelInitialRemoteRWS		1.3.6.1.4.1.3076.2.1.2.16.2.1.11
This object contains the initial remote peer's receive window size as indicated by the tunnel peer (in the RWS AVP) during the tunnel establishment phase. If the tunnel is idle this object should maintain its value from the last time it was connected.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsTunnelBearerCapabilities		1.3.6.1.4.1.3076.2.1.2.16.2.1.12
This object describes the Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	sync(1), async(2), syncAsync(3)

alL2tpStatsTunnelFramingCapabilities		1.3.6.1.4.1.3076.2.1.2.16.2.1.13
This object describes the Framing Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	digital(1), analog(2), digitalAnalog(3)

alL2tpStatsTunnelControlRecvPackets		1.3.6.1.4.1.3076.2.1.2.16.2.1.14
This object contains the number of control packets received on the tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsTunnelControlRecvDiscards		1.3.6.1.4.1.3076.2.1.2.16.2.1.15
This object returns the number of received payload packets that were discarded.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsTunnelControlRecvZLB		1.3.6.1.4.1.3076.2.1.2.16.2.1.16
This object returns a count of the number of Zero Length Body control packet acknowledgement packets that were received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsTunnelControlOutOfSequence		1.3.6.1.4.1.3076.2.1.2.16.2.1.17
This object returns a count of the number of control packets that were not received in the correct order (as per the sequence number) on this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsTunnelControlOutOfWindow		1.3.6.1.4.1.3076.2.1.2.16.2.1.18
This object contains the number of control packets that were received outside of the offered receive window. It is implementation specific as to whether these packets are queued or discarded.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsTunnelControlSendPackets		1.3.6.1.4.1.3076.2.1.2.16.2.1.19
This object contains the number of control packets that were transmitted to the tunnel peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsTunnelControlSendZLB		1.3.6.1.4.1.3076.2.1.2.16.2.1.20
This object contains the number of Zero Length Body control packets that were transmitted to the tunnel peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsTunnelControlAckTimeouts		1.3.6.1.4.1.3076.2.1.2.16.2.1.21
This object returns a count of the number of control packet timeouts due to the lack of a timely acknowledgement from the tunnel peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsTunnelCurrentRemoteRWS		1.3.6.1.4.1.3076.2.1.2.16.2.1.22
This object contains the current remote receive window size as determined by the local flow control mechanism employed.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32	0..64

alL2tpStatsTunnelSendSeq		1.3.6.1.4.1.3076.2.1.2.16.2.1.23
This object contains the next send sequence number for the control channel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsTunnelSendSeqAck		1.3.6.1.4.1.3076.2.1.2.16.2.1.24
This object contains the send sequence number that the tunnel peer has acknowledged for the control channel. The flow control state can be determined by subtracting the l2tpTunnelStatsSendSeq from alL2tpStatsTunnelSendSeqAck and comparing this value to l2tpTunnelStatsCurrentRemoteRWS.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsTunnelRecvSeq		1.3.6.1.4.1.3076.2.1.2.16.2.1.25
This object contains the next receive sequence number expected to be received on this control channel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsTunnelRecvSeqAck		1.3.6.1.4.1.3076.2.1.2.16.2.1.26
This object contains the last receive sequence number that was acknowledged back to the tunnel peer for the control channel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsTunnelTotalSessions		1.3.6.1.4.1.3076.2.1.2.16.2.1.27
This object contains the total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsTunnelFailedSessions		1.3.6.1.4.1.3076.2.1.2.16.2.1.28
This object contains the total number of sessions that were initiated but failed to reach the established phase.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsTunnelActiveSessions		1.3.6.1.4.1.3076.2.1.2.16.2.1.29
This object contains the total number of sessions for this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

alL2tpStatsTunnelLastResultCode		1.3.6.1.4.1.3076.2.1.2.16.2.1.30
This object contains the last value of the result code as described in the Result Code AVP which caused the tunnel to disconnect.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsTunnelLastErrorCode		1.3.6.1.4.1.3076.2.1.2.16.2.1.31
This object contains the last value of the error code as described in the Result Code AVP which caused the tunnel to disconnect.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsTunnelLastErrorMessage		1.3.6.1.4.1.3076.2.1.2.16.2.1.32
This object contains the last value of the optional message as described in the Result Code AVP which caused the tunnel to disconnect.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alL2tpStatsSessionTable		1.3.6.1.4.1.3076.2.1.2.16.3
The L2TP session status and statistics table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AlL2tpStatsSessionEntry

alL2tpStatsSessionEntry		1.3.6.1.4.1.3076.2.1.2.16.3.1
An L2TP session interface stats entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	AlL2tpStatsSessionEntry

alL2tpStatsSessionRowStatus		1.3.6.1.4.1.3076.2.1.2.16.3.1.1
The status of this row. Used to terminate the session, cannot be used to create a session.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

alL2tpStatsSessionIfIndex		1.3.6.1.4.1.3076.2.1.2.16.3.1.2
This value for this object is equal to the value of ifIndex of the Interfaces MIB for session interfaces of type L2TP.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

alL2tpStatsSessionTID		1.3.6.1.4.1.3076.2.1.2.16.3.1.3
This object contains the control channel tunnel identifier for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsSessionLocalCID		1.3.6.1.4.1.3076.2.1.2.16.3.1.4
This object contains the local call identifier for the session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsSessionRemoteCID		1.3.6.1.4.1.3076.2.1.2.16.3.1.5
This object contains the remote call identifier for the session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsSessionUserName		1.3.6.1.4.1.3076.2.1.2.16.3.1.6
This object identifies the peer session name on this interface. This is typically the login name of the remote user. If the user name is unknown to the local tunnel peer then this object will contain a null string.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alL2tpStatsSessionState		1.3.6.1.4.1.3076.2.1.2.16.3.1.7
This object contains the current state of the session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	sessionIdle(1), sessionConnecting(2), sessionEstablished(3), sessionDisconnecting(4)

alL2tpStatsSessionCallType		1.3.6.1.4.1.3076.2.1.2.16.3.1.8
This object indicates the type of call and the role this tunnel peer is providing for this session. For example, lacIncoming(1) indicates that this tunnel peer is acting as a LAC and generated a Incoming-Call-Request to the tunnel peer (the LNS). Note that tunnel peers can be both LAC and LNS simultaneously.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	lacIncoming(1), lnsIncoming(2), lacOutgoing(3), lnsOutgoing(4)

alL2tpStatsSessionCallSerialNumber		1.3.6.1.4.1.3076.2.1.2.16.3.1.9
This object contains the serial number that has been assigned to this session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

alL2tpStatsSessionTxConnectSpeed		1.3.6.1.4.1.3076.2.1.2.16.3.1.10
This object returns the last known transmit baud rate for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

alL2tpStatsSessionRxConnectSpeed		1.3.6.1.4.1.3076.2.1.2.16.3.1.11
This object returns the last known receive baud rate for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

alL2tpStatsSessionCallBearerType		1.3.6.1.4.1.3076.2.1.2.16.3.1.12
This object describes the bearer type of this session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	digital(1), analog(2)

alL2tpStatsSessionFramingType		1.3.6.1.4.1.3076.2.1.2.16.3.1.13
This object describes the framing type of this session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	asynchronous(1), synchronous(2)

alL2tpStatsSessionPhysChanId		1.3.6.1.4.1.3076.2.1.2.16.3.1.14
This object contains the physical channel identifier for the session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

alL2tpStatsSessionDNIS		1.3.6.1.4.1.3076.2.1.2.16.3.1.15
This object identifies the Dialed Number Information String that the LAC obtained from the network for the session. If no DNIS was provided then a null string will be returned.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alL2tpStatsSessionCLID		1.3.6.1.4.1.3076.2.1.2.16.3.1.16
This object identifies the Calling Line ID that the LAC obtained from the network for the session. If no CLID was provided then a null string will be returned.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alL2tpStatsSessionSubAddress		1.3.6.1.4.1.3076.2.1.2.16.3.1.17
This object identifies the Sub Address that the LAC obtained from the network for the session. If no Sub Address was provided then a null string will be returned.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alL2tpStatsSessionPrivateGroupID		1.3.6.1.4.1.3076.2.1.2.16.3.1.18
This object identifies the Private Group Identifier used for this tunneled session. If no Private Group Identifier was provided then a null string will be returned.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

alL2tpStatsSessionProxyLcp		1.3.6.1.4.1.3076.2.1.2.16.3.1.19
Indicates whether the LAC performed proxy LCP for this session.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

alL2tpStatsSessionAuthMethod		1.3.6.1.4.1.3076.2.1.2.16.3.1.20
This object contains the proxy authentication method employed by the LAC for the session. If l2tpSessionProxyLcp is false(2) this object should not be interpreted.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), text(2), pppChap(3), pppPap(4)

alL2tpStatsSessionLocalRWS		1.3.6.1.4.1.3076.2.1.2.16.3.1.21
This object returns the local send window size for this session. If the value of the object alL2tpStatsSessionSequencingState is none(1) then this object should not be interpreted.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsSessionRemoteInitialRWS		1.3.6.1.4.1.3076.2.1.2.16.3.1.22
This object returns the initial remote send window size for this session. If the value of the object alL2tpStatsSessionSequencingState is none(1) then this object should not be interpreted.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsSessionRemotePPD		1.3.6.1.4.1.3076.2.1.2.16.3.1.23
This object contains the Packet Processing Delay for the session. If the value of the object alL2tpStatsSessionSequencingState is none(1) then this object should not be interpreted.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

alL2tpStatsSessionSequencingState		1.3.6.1.4.1.3076.2.1.2.16.3.1.24
This object defines which tunnel peers have requested payload sequencing. The value of both(4) indicates that both peers have requested payload sequencing.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), remote(2), local(3), both(4)

alL2tpStatsSessionRecvOctets		1.3.6.1.4.1.3076.2.1.2.16.3.1.25
This object returns the total number payload octets received for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsSessionRecvPackets		1.3.6.1.4.1.3076.2.1.2.16.3.1.26
This object returns the total number of payload packets received for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsSessionRecvDiscards		1.3.6.1.4.1.3076.2.1.2.16.3.1.27
This object returns the total number of payload packets received that were discarded for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsSessionRecvZLB		1.3.6.1.4.1.3076.2.1.2.16.3.1.28
This object returns the total number of Zero Length Body acknowlegement payload packets received for this session.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsSessionOutSequence		1.3.6.1.4.1.3076.2.1.2.16.3.1.29
This object returns the total number of packets received for this session which were received out of sequence.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsSessionOutOfWindow		1.3.6.1.4.1.3076.2.1.2.16.3.1.30
This object returns a count of the number of payload packets that were received outside of the expected window for this session.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsSessionSendOctets		1.3.6.1.4.1.3076.2.1.2.16.3.1.31
This object returns the total number of payload octets transmitted for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsSessionSendPackets		1.3.6.1.4.1.3076.2.1.2.16.3.1.32
This object returns the total number of payload packets transmitted for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsSessionSendZLB		1.3.6.1.4.1.3076.2.1.2.16.3.1.33
This object returns the total number of Zero Length Body acknowledgement packets transmitted for this session.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsSessionAckTimeouts		1.3.6.1.4.1.3076.2.1.2.16.3.1.34
This object returns the total number of acknowledgement timeouts seen on payload packets for this session.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsSessionReassemblyTimeouts		1.3.6.1.4.1.3076.2.1.2.16.3.1.35
This object returns the number of reassembly time outs that have occured for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsSessionCurrentRemoteRWS		1.3.6.1.4.1.3076.2.1.2.16.3.1.36
This object contains the current remote receive window size as determined by the local flow control mechanism employed.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32	0..65535

alL2tpStatsSessionSendSeq		1.3.6.1.4.1.3076.2.1.2.16.3.1.37
This object contains the next send sequence number for for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsSessionSendSeqAck		1.3.6.1.4.1.3076.2.1.2.16.3.1.38
This object contains the send sequence number that the tunnel peer has acknowledged for the payload channel. The flow control state can be determined by subtracting the alL2tpStatsSessionSendSeq from alL2tpStatsSessionSendSeqAck and comparing this value to l2tpSesssionStatsCurrentRemoteRWS.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsSessionSendSeqResets		1.3.6.1.4.1.3076.2.1.2.16.3.1.39
This object contains the total number of sequence number resets (payload packets with the R-bit set) sent on this session.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsSessionRecvSeq		1.3.6.1.4.1.3076.2.1.2.16.3.1.40
This object contains the next receive sequence number expected to be received on this session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsSessionRecvSeqAck		1.3.6.1.4.1.3076.2.1.2.16.3.1.41
This object contains the last receive sequence number that was acknowledged back to the tunnel peer for the session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

alL2tpStatsSessionRecvSeqResets		1.3.6.1.4.1.3076.2.1.2.16.3.1.42
This object contains the total number of sequence number resets (payload packets with the R-bit set) received on this session.
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

alL2tpStatsSessionTunnelPeerIpAddr		1.3.6.1.4.1.3076.2.1.2.16.3.1.43
The peer's IP address for the tunnel to which this session belongs.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

altigaL2tpStatsMibConformance		1.3.6.1.4.1.3076.1.1.21.2.1
OBJECT IDENTIFIER

altigaL2tpStatsMibCompliances		1.3.6.1.4.1.3076.1.1.21.2.1.1
OBJECT IDENTIFIER

altigaL2tpStatsMibCompliance		1.3.6.1.4.1.3076.1.1.21.2.1.1.1
The compliance statement for agents which implement the Altiga L2TP Statistics MIB.
Status: current	Access: read-only
MODULE-COMPLIANCE

altigaL2tpStatsGroup		1.3.6.1.4.1.3076.2.1.1.1.16.2
The objects for L2TP statistics.
Status: current	Access: read-only
OBJECT-GROUP

altigaL2tpStatsDepGroup		1.3.6.1.4.1.3076.2.1.1.1.16.3
The deprecated objects for L2TP statistics.
Status: deprecated	Access: read-only
OBJECT-GROUP