ALVARION-BANDWIDTH-CONTROL-MIB

File: ALVARION-BANDWIDTH-CONTROL-MIB.mib (8006 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
ALVARION-TC ALVARION-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
TruthValue MODULE-COMPLIANCE OBJECT-GROUP
AlvarionPriorityQueue alvarionMgmtV2

Defined Types

CoBandwidthControlLevelEntry  
SEQUENCE    
  coBandwidthControlLevelIndex AlvarionPriorityQueue
  coBandwidthControlLevelMinTransmitRate Integer32
  coBandwidthControlLevelMaxTransmitRate Integer32
  coBandwidthControlLevelMinReceiveRate Integer32
  coBandwidthControlLevelMaxReceiveRate Integer32

Defined Values

alvarionBandwidthControlMIB 1.3.6.1.4.1.12394.1.10.5.14
Alvarion Bandwidth Control MIB.
MODULE-IDENTITY    

alvarionBandwidthControlMIBObjects 1.3.6.1.4.1.12394.1.10.5.14.1
OBJECT IDENTIFIER    

coBandwidthControlConfig 1.3.6.1.4.1.12394.1.10.5.14.1.1
OBJECT IDENTIFIER    

coBandwidthControlEnable 1.3.6.1.4.1.12394.1.10.5.14.1.1.1
Indicates if bandwidth control is enabled or disabled on the Internet port.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

coBandwidthControlMaxTransmitRate 1.3.6.1.4.1.12394.1.10.5.14.1.1.2
Indicates the maximum rate at which data can be transmitted on the Internet port. If traffic exceeds this rate for short bursts, it is buffered. Long overages will result in data being dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

coBandwidthControlMaxReceiveRate 1.3.6.1.4.1.12394.1.10.5.14.1.1.3
Indicates the maximum rate at which data can be received on the Internet port. If traffic exceeds this rate for short bursts it is buffered. Long overages will result in data being dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

coBandwidthControlLevelTable 1.3.6.1.4.1.12394.1.10.5.14.1.1.4
A table defining the current bandwidth level settings that are active on the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CoBandwidthControlLevelEntry

coBandwidthControlLevelEntry 1.3.6.1.4.1.12394.1.10.5.14.1.1.4.1
An entry in the coBandwidthControlLevelTable. coBandwidthControlLevelIndex - Uniquely access a definition for this particular bandwidth control level.
Status: current Access: not-accessible
OBJECT-TYPE    
  CoBandwidthControlLevelEntry  

coBandwidthControlLevelIndex 1.3.6.1.4.1.12394.1.10.5.14.1.1.4.1.1
Specifies the level index. Each index defines a bandwidth level that traffic can be assigned to. Four indexes are defined (1 to 4) with the following meanings: 1-Low, 2-Normal, 3- High, 4-Very High.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlvarionPriorityQueue  

coBandwidthControlLevelMinTransmitRate 1.3.6.1.4.1.12394.1.10.5.14.1.1.4.1.2
Specify the minimum transmit rate for the level as a percentage of coBandwidthControlMaxTransmitRate. This is the minimum amount of bandwidth that will be assigned to a level as soon as outgoing traffic is present on the level.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

coBandwidthControlLevelMaxTransmitRate 1.3.6.1.4.1.12394.1.10.5.14.1.1.4.1.3
Specify the maximum transmit rate for the specified level as a percentage of coBandwidthControlMaxTransmitRate. This is the maximum amount of outgoing bandwidth that can be consumed by the level. Traffic in excess will be buffered for short bursts, and dropped for sustained overages
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

coBandwidthControlLevelMinReceiveRate 1.3.6.1.4.1.12394.1.10.5.14.1.1.4.1.4
Specify the minimum receive rate for the specified level as a percentage of coBandwidthControlMaxReceiveRateRate. This is the minimum amount of bandwidth that will be assigned to a level as soon as incoming traffic is present on the level.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

coBandwidthControlLevelMaxReceiveRate 1.3.6.1.4.1.12394.1.10.5.14.1.1.4.1.5
Specify the maximum receive rate for the specified level as a percentage of coBandwidthControlMaxReceiveRateRate. This is the maximum amount of incoming bandwidth that can be consumed by the level. Traffic in excess will be buffered for short bursts, and dropped for sustained overages.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

alvarionBandwidthControlMIBConformance 1.3.6.1.4.1.12394.1.10.5.14.2
OBJECT IDENTIFIER    

alvarionBandwidthControlMIBCompliances 1.3.6.1.4.1.12394.1.10.5.14.2.1
OBJECT IDENTIFIER    

alvarionBandwidthControlMIBGroups 1.3.6.1.4.1.12394.1.10.5.14.2.2
OBJECT IDENTIFIER    

alvarionBandwidthControlMIBCompliance 1.3.6.1.4.1.12394.1.10.5.14.2.1.1
The compliance statement for the Bandwidth Control MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

alvarionBandwidthControlMIBGroup 1.3.6.1.4.1.12394.1.10.5.14.2.2.1
A collection of objects for use with Bandwidth Controls.
Status: current Access: read-only
OBJECT-GROUP    

alvarionBandwidthControlLevelMIBGroup 1.3.6.1.4.1.12394.1.10.5.14.2.2.2
A collection of objects for use with Bandwidth Controls.
Status: current Access: read-only
OBJECT-GROUP