AP80-PRIVATE-MIB

File: AP80-PRIVATE-MIB.mib (134441 bytes)

Imported modules

RFC1213-MIB RFC1155-SMI SNMPv2-SMI

Imported symbols

ifIndex mgmt Counter
IpAddress enterprises Integer32
OBJECT-TYPE TimeTicks Counter32

Defined Types

MacAddress  
OCTET STRING Size(6)    

DisplayString  
OCTET STRING    

TruthValue  
INTEGER false(2), true(1)    

LineEntry  
SEQUENCE    
  lineIndex Integer32
  lineDataBits Integer32
  lineParity INTEGER
  lineSpeed Integer32
  lineStopBits Integer32

PortEntry  
SEQUENCE    
  portIndex Integer32
  portName DisplayString
  portType INTEGER
  portSpeedDpxCfg INTEGER
  portFlowCtrlCfg INTEGER
  portCapabilities INTEGER
  portAutonegotiation INTEGER
  portSpeedDpxStatus INTEGER
  portFlowCtrlStatus INTEGER

Dot11AuthenticationServerEntry  
SEQUENCE    
  dot11AuthenticationServerIndex Integer32
  dot11AuthenticationServer IpAddress
  dot11AuthenticationPort INTEGER
  dot11AuthenticationKey DisplayString
  dot11AuthenticationRetransmit INTEGER
  dot11AuthenticationTimeout INTEGER
  dot11AuthenticationAcctPort INTEGER
  dot11AuthenticationAcctInterimUpdate INTEGER
  dot11AuthenticationMACAddressFormat INTEGER
  dot11AuthenticationVLANIDFormat INTEGER

Dot11FilterEntry  
SEQUENCE    
  dot11FilterAddress MacAddress
  dot11FilterStatus INTEGER

Dot11AuthenticationSupplicantEntry  
SEQUENCE    
  dot118021xSuppIndex Integer32
  dot118021xSuppState INTEGER
  dot118021xSuppUser DisplayString
  dot118021xSuppPasswd DisplayString

Dot11VapAuthenticationEntry  
SEQUENCE    
  dot11Vap8021xIndex Integer32
  dot11Vap8021xState INTEGER
  dot11Vap8021xBroadcastKeyRefreshRate INTEGER
  dot11Vap8021xSessionKeyRefreshRate INTEGER
  dot11Vap8021xReauthenticationTimeout INTEGER
  dot11VapAuthMACAuthenticationType INTEGER
  dot11VapAuthMACAuthenticationTimeout INTEGER

EnterpriseApNativeVlanEntry  
SEQUENCE    
  nativeVlanIfIndex Integer32
  nativeVlanSsidNumber Integer32
  nativeVlanVlanId Integer32

EnterpriseApFilterProtocolEntry  
SEQUENCE    
  enterpriseApFilterProtocolIndex Integer32
  enterpriseApFilterProtocolName DisplayString
  enterpriseApFilterProtocolISODesignator DisplayString
  enterpriseApFilterProtocolState INTEGER

UplinkPortMACAddrFilteringEntry  
SEQUENCE    
  uplinkPortMacAddrIndex Integer32
  uplinkPortMACAddr MacAddress
  deleteMacAddr INTEGER

EnterpriseApSyslogServerEntry  
SEQUENCE    
  enterpriseApSyslogServerIndex Integer32
  enterpriseApSyslogServerState INTEGER
  enterpriseApSyslogServerIPAddress IpAddress
  enterpriseApSyslogServerPort INTEGER

EnterpriseApSecurityEntry  
SEQUENCE    
  enterpriseApSecurityIndex Integer32
  enterpriseApSecurityAuthType INTEGER
  enterpriseApSecuritySharedKeyLen INTEGER
  enterpriseApSecurityWPAMode INTEGER
  enterpriseApSecurityWPAKeyType INTEGER
  enterpriseApSecurityWPACipher INTEGER
  enterpriseApSecurityWPAPSKType INTEGER
  enterpriseApSecurityWPAPSK DisplayString
  enterpriseApSecurityWEPKeyType INTEGER
  enterpriseApSecurityWEPEnabled TruthValue
  enterpriseApSecurityWPACipherSuite INTEGER
  enterpriseApSecurityWPAPreAuthentication INTEGER
  enterpriseApSecurityWPAPmksaLifetime INTEGER

EnterpriseApRadioEntry  
SEQUENCE    
  enterpriseApRadioIndex Integer32
  enterpriseApRadioState INTEGER
  enterpriseApRadioAutoChannel INTEGER
  enterpriseApRadioTransmitPower INTEGER
  enterpriseApRadioClosedSystem INTEGER
  enterpriseApRadioMaxAssoc INTEGER
  enterpriseApRadioTransmitKey INTEGER
  enterpriseApRadioTurboMode INTEGER
  enterpriseApRadioDescription DisplayString
  enterpriseApRadioDataRate INTEGER
  enterpriseApRadioGMode INTEGER
  enterpriseApRadioAntennaMode INTEGER
  enterpriseApRadioAntennaId DisplayString
  enterpriseApRadioAntennaControlMethod INTEGER
  enterpriseApRadioAntennaLocation INTEGER
  enterpriseApRadioRogueApDetection INTEGER
  enterpriseApRadioRogueApScanInterval Integer32
  enterpriseApRadioRogueApScanDuration Integer32
  enterpriseApRadioRogueApScanNow INTEGER
  enterpriseApRadioMICMode INTEGER
  enterpriseApRadioSuperMode INTEGER
  enterpriseApRadioBeaconInterval Integer32
  enterpriseApRadioDataBeaconRate Integer32
  enterpriseApRadioChannel Integer32
  enterpriseApRadioFragmentLength Integer32
  enterpriseApRadioRTSThreshold Integer32
  enterpriseApRadioAntennaGainReduction Integer32

EnterpriseApSNMPTrapDestinationEntry  
SEQUENCE    
  enterpriseApSNMPTrapDestinationIndex INTEGER
  enterpriseApSNMPTrapDestinationCommunity DisplayString
  enterpriseApSNMPTrapDestinationIP IpAddress
  enterpriseApSNMPTrapDestinationState INTEGER

EnterpriseApSessionEntry  
SEQUENCE    
  enterpriseApSessionIfIndex Integer32
  enterpriseApSessionStationAddres MacAddress
  enterpriseApSessionAuthenticated TruthValue
  enterpriseApSessionAssociated TruthValue
  enterpriseApSessionIsForwarding TruthValue
  enterpriseApSessionKeyType INTEGER
  enterpriseApSessionAssociationId Integer32
  enterpriseApSessionLastAuthenticatedTime TimeTicks
  enterpriseApSessionAssociatedTime TimeTicks
  enterpriseApSessionLastAssociatedTime TimeTicks
  enterpriseApSessionLastDisassociatedTime TimeTicks
  enterpriseApSessionTxPacketCount Counter32
  enterpriseApSessionRxPacketCount Counter32
  enterpriseApSessionTxByteCount Counter32
  enterpriseApSessionRxByteCount Counter32

EnterpriseAPVapRadioEntry  
SEQUENCE    
  enterpriseAPVapRadioIndex Integer32
  enterpriseAPVapRadioState INTEGER
  enterpriseAPVapRadioClosedSystem INTEGER
  enterpriseAPVapRadioMaxAssoc INTEGER
  enterpriseAPVapRadioTransmitKey INTEGER
  enterpriseAPVapRadioDescription DisplayString
  enterpriseAPVapRadioAuthTimeoutInterval Integer32
  enterpriseAPVapRadioAssocTimeoutInterval Integer32
  enterpriseAPVapRadioWPA2PMKSALifeTime Integer32

EnterpriseApRadioWdsEntry  
SEQUENCE    
  wdsApRole INTEGER
  wdsChannelAutoSync INTEGER
  wdsMasterSlaveMode INTEGER

EnterpriseApRadioWdsPeerEntry  
SEQUENCE    
  wdsPeerIndex Integer32
  wdsPeerBssid DisplayString

EnterpriseApWMMEntry  
SEQUENCE    
  enterpriseApWMMModeIndex Integer32
  enterpriseApWMMMode INTEGER

EnterpriseApWMMAckPolicyEntry  
SEQUENCE    
  enterpriseApWMMAckPolicyIndex Integer32
  enterpriseApWMMACKPolicy INTEGER

EnterpriseApWMMBSSParamEntry  
SEQUENCE    
  enterpriseApWMMBSSParamIndex Integer32
  enterpriseApWMMBSSParamLogCwMin Integer32
  enterpriseApWMMBSSParamLogCwMax Integer32
  enterpriseApWMMBSSParamAIFSN Integer32
  enterpriseApWMMBSSParamTXOPLimit Integer32
  enterpriseApWMMBSSParamAdmissionCtrl INTEGER

EnterpriseApWMMAPParamEntry  
SEQUENCE    
  enterpriseApWMMAPParamIndex Integer32
  enterpriseApWMMAPParamLogCwMin Integer32
  enterpriseApWMMAPParamLogCwMax Integer32
  enterpriseApWMMAPParamAIFSN Integer32
  enterpriseApWMMAPParamTXOPLimit Integer32
  enterpriseApWMMAPParamAdmissionCtrl INTEGER

EnterpriseApSTPNodeEntry  
SEQUENCE    
  enterpriseApSTPNodeIndex Integer32
  enterpriseApSTPNodeLinkPathCost Integer32
  enterpriseApSTPNodeLinkPortPriority Integer32

Defined Values

aruba 1.3.6.1.4.1.14823
OBJECT IDENTIFIER    

arubaEnterpriseMibModules 1.3.6.1.4.1.14823.2
OBJECT IDENTIFIER    

arubaAp 1.3.6.1.4.1.14823.2.3
OBJECT IDENTIFIER    

wlsrOutDoorApMibModules 1.3.6.1.4.1.14823.2.3.2
OBJECT IDENTIFIER    

enterpriseApSys 1.3.6.1.4.1.14823.2.3.2.1
OBJECT IDENTIFIER    

enterpriseApLineMgnt 1.3.6.1.4.1.14823.2.3.2.2
OBJECT IDENTIFIER    

enterpriseApPortMgnt 1.3.6.1.4.1.14823.2.3.2.3
OBJECT IDENTIFIER    

enterpriseApFileTransferMgt 1.3.6.1.4.1.14823.2.3.2.4
OBJECT IDENTIFIER    

enterpriseApResetMgt 1.3.6.1.4.1.14823.2.3.2.5
OBJECT IDENTIFIER    

enterpriseApIpMgt 1.3.6.1.4.1.14823.2.3.2.6
OBJECT IDENTIFIER    

enterpriseAPdot11 1.3.6.1.4.1.14823.2.3.2.7
OBJECT IDENTIFIER    

enterpriseApAdmin 1.3.6.1.4.1.14823.2.3.2.8
OBJECT IDENTIFIER    

enterpriseApVLAN 1.3.6.1.4.1.14823.2.3.2.9
OBJECT IDENTIFIER    

enterpriseApFilterControl 1.3.6.1.4.1.14823.2.3.2.10
OBJECT IDENTIFIER    

enterpriseApSNTP 1.3.6.1.4.1.14823.2.3.2.11
OBJECT IDENTIFIER    

enterpriseApDNS 1.3.6.1.4.1.14823.2.3.2.12
OBJECT IDENTIFIER    

enterpriseApSyslog 1.3.6.1.4.1.14823.2.3.2.13
OBJECT IDENTIFIER    

enterpriseApSecurity 1.3.6.1.4.1.14823.2.3.2.14
OBJECT IDENTIFIER    

enterpriseApRadio 1.3.6.1.4.1.14823.2.3.2.15
OBJECT IDENTIFIER    

enterpriseApSNMP 1.3.6.1.4.1.14823.2.3.2.16
OBJECT IDENTIFIER    

enterpriseApSession 1.3.6.1.4.1.14823.2.3.2.17
OBJECT IDENTIFIER    

enterpriseAPVapRadio 1.3.6.1.4.1.14823.2.3.2.20
OBJECT IDENTIFIER    

enterpriseApRadioWds 1.3.6.1.4.1.14823.2.3.2.22
OBJECT IDENTIFIER    

enterpriseApWMM 1.3.6.1.4.1.14823.2.3.2.24
OBJECT IDENTIFIER    

enterpriseApSTP 1.3.6.1.4.1.14823.2.3.2.25
OBJECT IDENTIFIER    

swHardwareVer 1.3.6.1.4.1.14823.2.3.2.1.1
Hardware version of the main board.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

swBootRomVer 1.3.6.1.4.1.14823.2.3.2.1.2
Boot ROM code version of the main board.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

swOpCodeVer 1.3.6.1.4.1.14823.2.3.2.1.3
Operation code version of the main board.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

swSerialNumber 1.3.6.1.4.1.14823.2.3.2.1.4
Serial Number of the Access Point.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

sysNotificationTree 1.3.6.1.4.1.14823.2.3.2.1.5
OBJECT IDENTIFIER    

sysNotificationObjects 1.3.6.1.4.1.14823.2.3.2.1.5.1
OBJECT IDENTIFIER    

sysNotifications 1.3.6.1.4.1.14823.2.3.2.1.5.2
OBJECT IDENTIFIER    

sysSystemUp 1.3.6.1.4.1.14823.2.3.2.1.5.2.1
The system up notification shall be sent when the AP is fully up and running.
Status: current Access: read-only
NOTIFICATION-TYPE    

sysSystemDown 1.3.6.1.4.1.14823.2.3.2.1.5.2.2
The system down notification shall be sent before the AP is about to reboot.
Status: current Access: read-only
NOTIFICATION-TYPE    

sysRadiusServerChanged 1.3.6.1.4.1.14823.2.3.2.1.5.2.3
The RADIUS server changed notification shall be sent when the RADIUS server has changed from Primary / Secondary to Secondary / Primary.
Status: current Access: read-only
NOTIFICATION-TYPE    

sysConfigFileVersionChanged 1.3.6.1.4.1.14823.2.3.2.1.5.2.4
The Config file version changed notification shall be sent when the version of the AP's configuration file has changed.
Status: current Access: read-only
NOTIFICATION-TYPE    

lineTable 1.3.6.1.4.1.14823.2.3.2.2.1
Table of descriptive and status information about configuration of each RS-232 line in this system
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LineEntry

lineEntry 1.3.6.1.4.1.14823.2.3.2.2.1.1
An entry in the table, containing information about configuration in one RS232 line of the Access Point.
Status: current Access: not-accessible
OBJECT-TYPE    
  LineEntry  

lineIndex 1.3.6.1.4.1.14823.2.3.2.2.1.1.1
This is defined as RS-232 index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

lineDataBits 1.3.6.1.4.1.14823.2.3.2.2.1.1.2
This is defined as number of data bits for the RS232 interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lineParity 1.3.6.1.4.1.14823.2.3.2.2.1.1.3
This is defined as parity of the RS232 interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(99), odd(1), even(2)  

lineSpeed 1.3.6.1.4.1.14823.2.3.2.2.1.1.4
This is defined as the speed of the RS-232 interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lineStopBits 1.3.6.1.4.1.14823.2.3.2.2.1.1.5
This is defined as the number of stop bits for the RS-232 interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portTable 1.3.6.1.4.1.14823.2.3.2.3.1
Table of descriptive and status information about configuration of each switch port (including expansion slot) in this system. This table also contains information about each trunk (similar to Cisco's EtherChannel).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortEntry

portEntry 1.3.6.1.4.1.14823.2.3.2.3.1.1
An entry in the table, containing information about configuration in one switch port of the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortEntry  

portIndex 1.3.6.1.4.1.14823.2.3.2.3.1.1.1
This is defined as ifIndex in the IF-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

portName 1.3.6.1.4.1.14823.2.3.2.3.1.1.2
Indicates the port name. This is same as ifAlias in the IF-MIB (RFC2863 or later).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

portType 1.3.6.1.4.1.14823.2.3.2.3.1.1.3
Indicates the port type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), hundredBaseTX(2), hundredBaseFX(3), thousandBaseSX(4), thousandBaseLX(5), thousandBaseT(6), thousandBaseGBIC(7), thousandBaseMiniGBIC(8)  

portSpeedDpxCfg 1.3.6.1.4.1.14823.2.3.2.3.1.1.4
Indicates the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100Mbps and full duplex mode halfDuplex1000(6) - 1000Mbps and half duplex mode fullDuplex1000(7) - 1000Mbps and full duplex mode hundredBaseTX port can be set as halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) hundredBaseFX port can be set as halfDuplex100(4) fullDuplex100(5) thousandBaseSX port can be set as halfDuplex1000(6) fullDuplex1000(7) The actual operating speed and duplex of the port is given by portSpeedDpxStatus.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER reserved(1), halfDuplex10(2), fullDuplex10(3), halfDuplex100(4), fullDuplex100(5), halfDuplex1000(6), fullDuplex1000(7)  

portFlowCtrlCfg 1.3.6.1.4.1.14823.2.3.2.3.1.1.5
(1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, the port uses IEEE 802.3x flow control mechanism. If the port type is hundredBaseFX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, Flow control mechanism will not function. (2) Flow control mechanism is disabled. (3) Flow control mechanism is backPressure. when the port is in fullDuplex mode.This flow control mechanism will not function. (4) Flow control mechanism is IEEE 802.3x flow control. when the port is in halfDuplex mode.This flow control mechanism will not function. hundredBaseTX and thousandBaseSX port can be set as: enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4). hundredBaseFX port can be set as: enabled(1), disabled(2), backPressure(3). The actual flow control mechanism is used given by portFlowCtrlStatus.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4)  

portCapabilities 1.3.6.1.4.1.14823.2.3.2.3.1.1.6
Port capabilities.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER portCap10half(99), portCap10full(1), portCap100half(2), portCap100full(3), portCap1000half(4), portCap1000full(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), portCapSym(14), portCapFlowCtrl(15)  

portAutonegotiation 1.3.6.1.4.1.14823.2.3.2.3.1.1.7
Whether autonegotiation is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

portSpeedDpxStatus 1.3.6.1.4.1.14823.2.3.2.3.1.1.8
The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER error(1), halfDuplex10(2), fullDuplex10(3), halfDuplex100(4), fullDuplex100(5), halfDuplex1000(6), fullDuplex1000(7)  

portFlowCtrlStatus 1.3.6.1.4.1.14823.2.3.2.3.1.1.9
(2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER error(1), backPressure(2), dot3xFlowControl(3), none(4)  

transferType 1.3.6.1.4.1.14823.2.3.2.4.1
Type of file to transfer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ftp(1), tftp(2)  

fileType 1.3.6.1.4.1.14823.2.3.2.4.2
Type of file to transfer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER application(1), config(2), bootcode(3)  

srcFile 1.3.6.1.4.1.14823.2.3.2.4.3
The source file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

destFile 1.3.6.1.4.1.14823.2.3.2.4.4
The destination file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

fileServer 1.3.6.1.4.1.14823.2.3.2.4.5
The IP address of the TFTP server for transfer when a download is next requested via this MIB. This value is set to `0.0.0.0' when no IP address has been specified.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

userName 1.3.6.1.4.1.14823.2.3.2.4.6
The username specified for an FTP Transfer.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

password 1.3.6.1.4.1.14823.2.3.2.4.7
The password specified for an FTP Transfer.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

status 1.3.6.1.4.1.14823.2.3.2.4.8
The status of the transfer.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER running(1), success(2), failureGeneric(3), flashOpenError(10), flashMallocError(11), flashReadError(12), flashFtypeError(13), socketWriteError(20), protocolError(30)  

transferStart 1.3.6.1.4.1.14823.2.3.2.4.9
Set to go(1) to start a transfer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nothing(0), download(1), upload(2)  

restartOpCodeFile 1.3.6.1.4.1.14823.2.3.2.5.1
Name of op-code file for start-up.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

restartControl 1.3.6.1.4.1.14823.2.3.2.5.2
Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER running(1), warmBoot(2), coldBoot(3)  

netConfigIPAddress 1.3.6.1.4.1.14823.2.3.2.6.1
The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

netConfigSubnetMask 1.3.6.1.4.1.14823.2.3.2.6.2
The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

netConfigDefaultGateway 1.3.6.1.4.1.14823.2.3.2.6.3
The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

netConfigHttpState 1.3.6.1.4.1.14823.2.3.2.6.4
Whether HTTP is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

netConfigHttpPort 1.3.6.1.4.1.14823.2.3.2.6.5
The port number for HTTP. Default port number is 80.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1024..65535  

netConfigHttpsState 1.3.6.1.4.1.14823.2.3.2.6.6
Whether Secure HTTP is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

netConfigHttpsPort 1.3.6.1.4.1.14823.2.3.2.6.7
The port number for Secure HTTP. Default port number is 443.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1024..65535  

netConfigDHCPState 1.3.6.1.4.1.14823.2.3.2.6.8
Whether DHCP is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot11AuthenticationEntry 1.3.6.1.4.1.14823.2.3.2.7.1
OBJECT IDENTIFIER    

dot118021xState 1.3.6.1.4.1.14823.2.3.2.7.1.1
This attribute indicates that the Enterprise the state of the 802.1x authentication algorithm.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), supported(1), required(2)  

dot118021xBroadcastKeyRefreshRate 1.3.6.1.4.1.14823.2.3.2.7.1.2
The number (in minutes) between changing the broadcast key for 802.1x and WPA clients
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..1440  

dot118021xSessionKeyRefreshRate 1.3.6.1.4.1.14823.2.3.2.7.1.3
The number (in minutes) between changing session keys for 802.1x and WPA clients
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..1440  

dot118021xReauthenticationTimeout 1.3.6.1.4.1.14823.2.3.2.7.1.4
The number (in minutes) between forcing 802.1x clients to reauthenticate
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..1440  

dot11MACAuthenticationType 1.3.6.1.4.1.14823.2.3.2.7.1.5
This value indicates the type of mac authentication in use.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), local(1), radius(2)  

dot11AuthenticationServerTable 1.3.6.1.4.1.14823.2.3.2.7.2
Table of descriptive and status information about configuration of each authentication server.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11AuthenticationServerEntry

dot11AuthenticationServerEntry 1.3.6.1.4.1.14823.2.3.2.7.2.1
An entry in the table, containing information about configuration of one authentication server of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11AuthenticationServerEntry  

dot11AuthenticationServerIndex 1.3.6.1.4.1.14823.2.3.2.7.2.1.1
Index of the Authentication Server
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

dot11AuthenticationServer 1.3.6.1.4.1.14823.2.3.2.7.2.1.2
This value indicates the IP address of the authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dot11AuthenticationPort 1.3.6.1.4.1.14823.2.3.2.7.2.1.3
This value indicates the UDP Port used by the authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1024..65535  

dot11AuthenticationKey 1.3.6.1.4.1.14823.2.3.2.7.2.1.4
This value indicates the shared key used by the authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

dot11AuthenticationRetransmit 1.3.6.1.4.1.14823.2.3.2.7.2.1.5
This value indicates the retransmit timer length used by the authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..30  

dot11AuthenticationTimeout 1.3.6.1.4.1.14823.2.3.2.7.2.1.6
This value indicates the Timeout value(sec) used by the authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

dot11AuthenticationAcctPort 1.3.6.1.4.1.14823.2.3.2.7.2.1.7
The port number for radius server accounting.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1024..65535  

dot11AuthenticationAcctInterimUpdate 1.3.6.1.4.1.14823.2.3.2.7.2.1.8
This value indicates the Timeout value(sec) used by the radius server interim update.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 60..86400  

dot11AuthenticationMACAddressFormat 1.3.6.1.4.1.14823.2.3.2.7.2.1.9
This value indicates the MAC address format from Radius MAC authentication. no-delimiter format: aabbccddeeff single-dash format: aabbcc-ddeeff multi-dash format: aa-bb-cc-dd-ee-ff multi-colon format: aa:bb:cc:dd:ee:ff
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no-delimiter(1), single-dash(2), multi-dash(3), multi-colon(4)  

dot11AuthenticationVLANIDFormat 1.3.6.1.4.1.14823.2.3.2.7.2.1.10
This value indicates the VLAN ID format from Radius server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER hex(1), ascii(2)  

dot11MACAuthenticationFilter 1.3.6.1.4.1.14823.2.3.2.7.3
OBJECT IDENTIFIER    

dot11FilterDefault 1.3.6.1.4.1.14823.2.3.2.7.3.1
This value indicates the default access for local mac filters.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER allow(1), deny(2)  

dot11FilterTable 1.3.6.1.4.1.14823.2.3.2.7.3.2
Table of status information about each configured MAC Address Filtering Entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11FilterEntry

dot11FilterEntry 1.3.6.1.4.1.14823.2.3.2.7.3.2.1
An entry in the table, containing information about configuration in one radio of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11FilterEntry  

dot11FilterAddress 1.3.6.1.4.1.14823.2.3.2.7.3.2.1.1
This value indicates the MAC address of the filter entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

dot11FilterStatus 1.3.6.1.4.1.14823.2.3.2.7.3.2.1.2
This value indicates the Status of the filter entry. Ifallowed, the client is allowed access to the network. If disallowed, the no frames will be forwarded to the network from the client.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER allowed(30), denied(31), delete(32)  

dot11NotificationTree 1.3.6.1.4.1.14823.2.3.2.7.4
OBJECT IDENTIFIER    

dot11NotificationObjects 1.3.6.1.4.1.14823.2.3.2.7.4.1
OBJECT IDENTIFIER    

dot11MacAddr 1.3.6.1.4.1.14823.2.3.2.7.4.1.1
Mac Address of the affected interface, returned with traps only.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

dot11Station 1.3.6.1.4.1.14823.2.3.2.7.4.1.2
This attribute holds the MAC address of the wireless station
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

dot11RequestType 1.3.6.1.4.1.14823.2.3.2.7.4.1.3
This attribute defines the request type sent by the station. Value = 1: Unknown request type Value = 2: Association Request Value = 3: Re-association Request Value = 4: Authentication
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER unknown(1), association(2), reAssociation(3), authentication(4)  

dot11ReasonCode 1.3.6.1.4.1.14823.2.3.2.7.4.1.4
This attribute defines the reason for the failure of an operation. Value = 1: Invalid mode/state Value = 2: Station not authenticated. Value = 3: Internal error Value = 4: Out of sequence frame Value = 5: Un-supportd algorithm Value = 6: Invalid frame length Value = 7: WEP is required on the AP Value = 8: WEP not allowed Value = 9: Challenge text mismatch
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER invalidModeOrState(1), unAuthenticatedStation(2), internalError(3), outOfSequenceFrame(4), unsupportedAlgorithm(5), invalidFrameLngth(6), wepRequiredOnAP(7), wepNotAllowed(8), challengeTextMismatch(9)  

dot11ApIpAddress 1.3.6.1.4.1.14823.2.3.2.7.4.1.5
This value indicates the IP address of the Access Point
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

dot1xAuthenticatorMacAddr 1.3.6.1.4.1.14823.2.3.2.7.4.1.6
This attribute holds the MAC address of the authenticator for the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

dot11Notifications 1.3.6.1.4.1.14823.2.3.2.7.4.2
OBJECT IDENTIFIER    

dot11StationAssociation 1.3.6.1.4.1.14823.2.3.2.7.4.2.1
The associate notification shall be sent when a station successfully associates with the Access Point. The value of the notification shall include the MAC address of the station that has associated.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

dot11StationReAssociation 1.3.6.1.4.1.14823.2.3.2.7.4.2.2
The re-associate notification shall be sent when a station successfully re-associates with the Access Point. The value of the notification shall include the MAC address of the station that has associated.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

dot11StationAuthentication 1.3.6.1.4.1.14823.2.3.2.7.4.2.3
The authentication notification shall be sent when a station successfully authenticates with the Access Point. The value of the notification shall include the MAC address of the station that has authenticated.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

dot11StationRequestFail 1.3.6.1.4.1.14823.2.3.2.7.4.2.4
The station request fail shall be sent out when a station fails to associate / re-associate / authenticate with the Access Point. The notification shall include the MAC address of the station and the reason code for the failure.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

dot11InterfaceBFail 1.3.6.1.4.1.14823.2.3.2.7.4.2.5
The InterfaceBFail notification shall be sent out when 802.11b wireless interface has failed.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

dot11InterfaceAGFail 1.3.6.1.4.1.14823.2.3.2.7.4.2.6
The InterfaceAGFail notification shall be sent out when 802.11a/802.11g wireless interface has failed.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

dot1xMacAddrAuthSuccess 1.3.6.1.4.1.14823.2.3.2.7.4.2.7
The 802.1x MAC address authentication success notification shall be sent when a station successfully authenticates the MAC address with the RADIUS server. The value of the notification shall include the MAC address of the station that has authenticated.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

dot1xMacAddrAuthFail 1.3.6.1.4.1.14823.2.3.2.7.4.2.8
The 802.1x MAC address authentication failure notification shall be sent when a station fails to authenticate the MAC address with the RADIUS server. The value of the notification shall include the MAC address of the station that failed to authenticate.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

dot1xAuthNotInitiated 1.3.6.1.4.1.14823.2.3.2.7.4.2.9
The 802.1x authentication not initiated notification shall be sent when a station did not initiate 802.1x authentication with the RADIUS server. The value of the notification shall include the MAC address of the station that did not initiate 802.1x authentication.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

dot1xAuthSuccess 1.3.6.1.4.1.14823.2.3.2.7.4.2.10
The 802.1x authentication success notification shall be sent when a station successfully authenticates with the RADIUS server. The value of the notification shall include the MAC address of the station that has authenticated.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

dot1xAuthFail 1.3.6.1.4.1.14823.2.3.2.7.4.2.11
The 802.1x authentication failure notification shall be sent when a station fails to authenticate with the RADIUS server. The value of the notification shall include the MAC address of the station that failed to authenticate.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

localMacAddrAuthSuccess 1.3.6.1.4.1.14823.2.3.2.7.4.2.12
The Local MAC address authentication success notification shall be sent when a station successfully authenticates the MAC address with the database stored locally within the AP. The value of the notification shall include the MAC address of the station that has authenticated.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

localMacAddrAuthFail 1.3.6.1.4.1.14823.2.3.2.7.4.2.13
The Local MAC address authentication failure notification shall be sent when a station fails to authenticate the MAC address with the database stored locally within the AP. The value of the notification shall include the MAC address of the station that has authenticated.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

pppLogonFail 1.3.6.1.4.1.14823.2.3.2.7.4.2.14
The PPP Logon failure notification shall be sent out when the AP fails to login successfully to the PPP peer using the supplied username and password.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

iappStationRoamedFrom 1.3.6.1.4.1.14823.2.3.2.7.4.2.15
The IAPP Station Roamed-From Notification shall be sent out whenever a station roams from another Access Point (AP) to this AP. The notification shall include the MAC address of the station and the IP address of the old AP.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

iappStationRoamedTo 1.3.6.1.4.1.14823.2.3.2.7.4.2.16
The IAPP Station Roamed-To Notification shall be sent out whenever a station roams to another Access Point (AP) from this AP. The notification shall include the MAC address of the station and the IP address of the new AP.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

iappContextDataSent 1.3.6.1.4.1.14823.2.3.2.7.4.2.17
The IAPP Context Data Sent notification shall be sent out whenever the context data for a station has been sent to the new AP with which the station has associated. The notification shall include the MAC address of the station and the IP address of the new AP.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

dot1xSupplicantAuthenticated 1.3.6.1.4.1.14823.2.3.2.7.4.2.18
The notification shall be sent when the AP has successfully authenticated with the switch. The value of the notification shall include the MAC address of the switch (authenticator) that the AP has authenticated with.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

dot11AuthenticationSupplicantTable 1.3.6.1.4.1.14823.2.3.2.7.5
Table of descriptive and status information about configuration of supplicant
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11AuthenticationSupplicantEntry

dot11AuthenticationSupplicantEntry 1.3.6.1.4.1.14823.2.3.2.7.5.1
An entry in the table, containing information about configuration of one supplicant.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11AuthenticationSupplicantEntry  

dot118021xSuppIndex 1.3.6.1.4.1.14823.2.3.2.7.5.1.1
Index of the interface for which this supplicant is running. Currently only the ethernet interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

dot118021xSuppState 1.3.6.1.4.1.14823.2.3.2.7.5.1.2
This object is used to enable or disable the 802.1x supplicant.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

dot118021xSuppUser 1.3.6.1.4.1.14823.2.3.2.7.5.1.3
This value indicates the username for supplicant. If value is configured, will display ****. Else will display EMPTY.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

dot118021xSuppPasswd 1.3.6.1.4.1.14823.2.3.2.7.5.1.4
This value indicates the password for supplicant. If value is configured, will display ****. Else will display EMPTY.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

dot11VapAuthenticationTable 1.3.6.1.4.1.14823.2.3.2.7.6
Table of descriptive and status information about configuration of 8021x for each Vap.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11VapAuthenticationEntry

dot11VapAuthenticationEntry 1.3.6.1.4.1.14823.2.3.2.7.6.1
An entry in the table, containing information about configuration of 8021x for each Vap of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11VapAuthenticationEntry  

dot11Vap8021xIndex 1.3.6.1.4.1.14823.2.3.2.7.6.1.1
Index for configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

dot11Vap8021xState 1.3.6.1.4.1.14823.2.3.2.7.6.1.2
This attribute indicates that the Enterprise the state of the 802.1x authentication algorithm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), supported(1), required(2)  

dot11Vap8021xBroadcastKeyRefreshRate 1.3.6.1.4.1.14823.2.3.2.7.6.1.3
The number (in minutes) between changing the broadcast key for 802.1x and WPA clients
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1440  

dot11Vap8021xSessionKeyRefreshRate 1.3.6.1.4.1.14823.2.3.2.7.6.1.4
The number (in minutes) between changing session keys for 802.1x and WPA clients
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1440  

dot11Vap8021xReauthenticationTimeout 1.3.6.1.4.1.14823.2.3.2.7.6.1.5
The number (in minutes) between forcing 802.1x clients to reauthenticate
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1440  

dot11VapAuthMACAuthenticationType 1.3.6.1.4.1.14823.2.3.2.7.6.1.6
This value indicates the type of mac authentication in use.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), local(1), remote(2)  

dot11VapAuthMACAuthenticationTimeout 1.3.6.1.4.1.14823.2.3.2.7.6.1.7
The number (in minutes) between forcing Radius MAC to authenticate.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1440  

enterpriseApAdminUser 1.3.6.1.4.1.14823.2.3.2.8.1
This value indicates the username for management login.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(3..16)  

enterpriseApAdminPassword 1.3.6.1.4.1.14823.2.3.2.8.2
This value indicates the password for management login. The password length is betwen 3 and 16. 'Zero-length' indicates 'no password'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

enterpriseApVLANNativeId 1.3.6.1.4.1.14823.2.3.2.9.1
This value indicates the native VLAN id.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

enterpriseApVLANState 1.3.6.1.4.1.14823.2.3.2.9.2
This value indicates whether VLANs are enabled or disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApNativeVlanTable 1.3.6.1.4.1.14823.2.3.2.9.3
Table used to manage the Vlans for each wireless interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnterpriseApNativeVlanEntry

enterpriseApNativeVlanEntry 1.3.6.1.4.1.14823.2.3.2.9.3.1
An entry in the table, containing information about vlan configuration of one wireless interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  EnterpriseApNativeVlanEntry  

nativeVlanIfIndex 1.3.6.1.4.1.14823.2.3.2.9.3.1.1
Interface Index of the wireless interface for which the vlan is assigned to.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

nativeVlanSsidNumber 1.3.6.1.4.1.14823.2.3.2.9.3.1.2
Associated Number for Service Set Id (SSID) of the wireless interface for which the vlan is assigned to. Note: This is for future support of multiple SSIDs per radio interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32  

nativeVlanVlanId 1.3.6.1.4.1.14823.2.3.2.9.3.1.3
This value indicates the native VLAN id of the wireless interface associated with the if index and the SSID number(if it is not 0).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Integer32  

enterpriseApFilterControlInterClientSTAsCommun 1.3.6.1.4.1.14823.2.3.2.10.1
This value indicates the Inter Client STAs Communication Filter setting. disabled (1) To disable the Inter Client STAs Communication Filter PreventIntraVAPClient (2) To set filter to prevent intra VAP client communication PreventInterAndIntraVAPClient(3) To set filter to prevent inter and intra VAP client communication
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), preventIntraVAPClient(2), preventInterAndIntraVAPClient(3)  

enterpriseApFilterControlAPManage 1.3.6.1.4.1.14823.2.3.2.10.2
This value indicates the AP management filter setting.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApFilterControlEthernet 1.3.6.1.4.1.14823.2.3.2.10.3
This value indicates the ethernet filter setting.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApFilterProtocolTable 1.3.6.1.4.1.14823.2.3.2.10.4
Table of descriptive and status information about configuration of the filter protocol table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnterpriseApFilterProtocolEntry

enterpriseApFilterProtocolEntry 1.3.6.1.4.1.14823.2.3.2.10.4.1
An entry in the filter protocol table, containing information about configuration of one filter table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  EnterpriseApFilterProtocolEntry  

enterpriseApFilterProtocolIndex 1.3.6.1.4.1.14823.2.3.2.10.4.1.1
Index of the Protocol Filters.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

enterpriseApFilterProtocolName 1.3.6.1.4.1.14823.2.3.2.10.4.1.2
This value indicates the name of the protocol filter. One of the following: Aironet_DDP, Appletalk_ARP, ARP, Banyan, Berkeley_Trailer_Negotiation, CDP, DEC_LAT, DEC_MOP, DEC_MOP_Dump_Load, DEC_XNS, EAPOL, Enet_Config_Test, Ethertalk, IP, LAN_Test, NetBEUI, Novell_IPX(new), Novell_IPX(old), RARP, Telxon_TXP, X.25_Level3
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

enterpriseApFilterProtocolISODesignator 1.3.6.1.4.1.14823.2.3.2.10.4.1.3
This value indicates the name of the protocol filter.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

enterpriseApFilterProtocolState 1.3.6.1.4.1.14823.2.3.2.10.4.1.4
This value indicates whether the protocol filter is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApFilterUplinkPortMACAddrFilter 1.3.6.1.4.1.14823.2.3.2.10.5
OBJECT IDENTIFIER    

uplinkPortMACAddrFilterStatus 1.3.6.1.4.1.14823.2.3.2.10.5.1
This value indicates whether the Uplink Port MAC Address Filter Table is enabled or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disabled(2)  

uplinkPortMACAddrFilterAddMac 1.3.6.1.4.1.14823.2.3.2.10.5.2
To add mac address to Uplink Port MAC Address Filter Table. (Mac Address format: xx-xx-xx-xx-xx-xx or xx:xx:xx:xx:xx:xx)
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

uplinkPortMACAddrFilteringTable 1.3.6.1.4.1.14823.2.3.2.10.5.3
Table of descriptive and status information about configuration of the Uplink Port MAC Address Filter Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UplinkPortMACAddrFilteringEntry

uplinkPortMACAddrFilteringEntry 1.3.6.1.4.1.14823.2.3.2.10.5.3.1
An entry in Uplink Port MAC Address Filter Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  UplinkPortMACAddrFilteringEntry  

uplinkPortMacAddrIndex 1.3.6.1.4.1.14823.2.3.2.10.5.3.1.1
The index for Uplink Port MAC Address Filter Table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

uplinkPortMACAddr 1.3.6.1.4.1.14823.2.3.2.10.5.3.1.2
The MAC Address of wireless clients which allowed to communicate on subnet.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

deleteMacAddr 1.3.6.1.4.1.14823.2.3.2.10.5.3.1.3
To delete the MAC Address from Uplink Port MAC Address Filter Table. Delete(1) To start delete MAC address. Nothing(2) Nothing occur.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), nothing(2)  

enterpriseApSNTPState 1.3.6.1.4.1.14823.2.3.2.11.1
This value indicates whether SNTP is enabled or not. At least one of the SNTP servers must have a valid IP address before SNTP can be enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApSNTPPrimaryServer 1.3.6.1.4.1.14823.2.3.2.11.2
This value indicates the IP address of the primary SNTP server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

enterpriseApSNTPSecondaryServer 1.3.6.1.4.1.14823.2.3.2.11.3
This value indicates the IP address of the secondary SNTP server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

enterpriseApSNTPTimezone 1.3.6.1.4.1.14823.2.3.2.11.4
This value indicates which timezone to use.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enewetakKwajalein(0), midwayIsland(1), hawaii(2), alaska(3), pacific(4), arizona(5), mountain(6), central(7), mexicoCity(8), saskatchewan(9), bogota(10), eastern(11), indiana(12), atlantic(13), caracas(14), santiago(15), newfoundland(16), brasilia(17), buenos(18), midAtlantic(19), azores(20), casablanca(21), greenwichMeanTimeDublin(22), greenwichMeanTimeLisbon(23), amsterdam(24), stockhoim(25), bratislava(26), prague(27), paris(28), sofija(29), athens(30), bucharest(31), cairo(32), harare(33), helsinki(34), israel(35), baghdad(36), moscow(37), tehran(38), abuDhabi(39), vogograd(40), islamabad(41), almaty(42), bangkok(43), beijing(44), taipei(45), tokyo(46), brisbane(47), canberra(48), guam(49), hobart(50), magadan(51), fiji(52), wellington(53)  

enterpriseApSNTPDST 1.3.6.1.4.1.14823.2.3.2.11.5
This value indicates whether Daylight Savings Time is enabled or not.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApSNTPDSTStartMonth 1.3.6.1.4.1.14823.2.3.2.11.6
This value indicates the starting month for Daylight Savings Time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..12  

enterpriseApSNTPDSTStartDay 1.3.6.1.4.1.14823.2.3.2.11.7
This value indicates the starting day for Daylight Savings Time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..31  

enterpriseApSNTPDSTEndMonth 1.3.6.1.4.1.14823.2.3.2.11.8
This value indicates the ending month for Daylight Savings Time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..12  

enterpriseApSNTPDSTEndDay 1.3.6.1.4.1.14823.2.3.2.11.9
This value indicates the ending day for Daylight Savings Time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..31  

sntpNotificationTree 1.3.6.1.4.1.14823.2.3.2.11.10
OBJECT IDENTIFIER    

sntpNotificationObjects 1.3.6.1.4.1.14823.2.3.2.11.10.1
OBJECT IDENTIFIER    

sntpNotifications 1.3.6.1.4.1.14823.2.3.2.11.10.2
OBJECT IDENTIFIER    

sntpServerFail 1.3.6.1.4.1.14823.2.3.2.11.10.2.1
The sntpServerFail notification shall be sent when the AP fails to get time from the configured SNTP server.
Status: current Access: read-write
NOTIFICATION-TYPE    

enterpriseApDNSPrimaryServer 1.3.6.1.4.1.14823.2.3.2.12.1
This value indicates the IP address of the primary DNS server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

enterpriseApDNSSecondaryServer 1.3.6.1.4.1.14823.2.3.2.12.2
This value indicates the IP address of the secondary DNS server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

enterpriseApSyslogState 1.3.6.1.4.1.14823.2.3.2.13.1
This value indicates whether syslog is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApSyslogConsoleState 1.3.6.1.4.1.14823.2.3.2.13.2
This value indicates whether syslog console logging is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApSyslogLevel 1.3.6.1.4.1.14823.2.3.2.13.3
This value indicates the syslog logging level.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7)  

enterpriseApSyslogServerTable 1.3.6.1.4.1.14823.2.3.2.13.4
Table of descriptive and status information about configuration of each syslog server.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnterpriseApSyslogServerEntry

enterpriseApSyslogServerEntry 1.3.6.1.4.1.14823.2.3.2.13.4.1
An entry in the table, containing information about configuration of one syslog server of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  EnterpriseApSyslogServerEntry  

enterpriseApSyslogServerIndex 1.3.6.1.4.1.14823.2.3.2.13.4.1.1
Index of the Syslog Server
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

enterpriseApSyslogServerState 1.3.6.1.4.1.14823.2.3.2.13.4.1.2
This value indicates whether the syslog server is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApSyslogServerIPAddress 1.3.6.1.4.1.14823.2.3.2.13.4.1.3
This value indicates the IP address of the syslog server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

enterpriseApSyslogServerPort 1.3.6.1.4.1.14823.2.3.2.13.4.1.4
This value indicates the UDP Port used by the syslog server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1024..65535  

enterpriseApSecurityTable 1.3.6.1.4.1.14823.2.3.2.14.1
Table of descriptive and status information about configuration of each radio in terms of security settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnterpriseApSecurityEntry

enterpriseApSecurityEntry 1.3.6.1.4.1.14823.2.3.2.14.1.1
An entry in the table, containing information about configuration of one radio of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  EnterpriseApSecurityEntry  

enterpriseApSecurityIndex 1.3.6.1.4.1.14823.2.3.2.14.1.1.1
Radio Index for security settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

enterpriseApSecurityAuthType 1.3.6.1.4.1.14823.2.3.2.14.1.1.2
This value indicates the type of authentication in use for this radio interface. opensystem(0) Set authentication open sharedkey(1) Set authentication shared wpa(2) Set WPA Mode wpapsk(3) Set WPA-PSK Mode wpa-wpa2-mixed(4) Set WPA-WPA2-Mixed Mode wpawpa2pskmixed(5) Set WPA-WPA2 PSK Mixed Mode wpa2(6) Set WPA2 Mode wpa2psk(7) Set WPA2-PSK Mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER opensystem(0), sharedkey(1), wpa(2), wpapsk(3), wpawpa2mixed(4), wpawpa2pskmixed(5), wpa2(6), wpa2psk(7)  

enterpriseApSecuritySharedKeyLen 1.3.6.1.4.1.14823.2.3.2.14.1.1.3
This value indicates the shared key length for this radio interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), sixtyFour(1), oneHundredTwentyEight(2), oneHundredFiftyTwo(3)  

enterpriseApSecurityWPAMode 1.3.6.1.4.1.14823.2.3.2.14.1.1.4
This value indicates the state of WPA for this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER supported(0), required(1), disabled(2)  

enterpriseApSecurityWPAKeyType 1.3.6.1.4.1.14823.2.3.2.14.1.1.5
This value indicates the type of WPA Key Management in use for this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dot1x(0), presharedkey(1)  

enterpriseApSecurityWPACipher 1.3.6.1.4.1.14823.2.3.2.14.1.1.6
This value indicates the type of WPA Cipher in use for this radio interface.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER wep(0), tkip(1), aes(2)  

enterpriseApSecurityWPAPSKType 1.3.6.1.4.1.14823.2.3.2.14.1.1.7
This value indicates the type of WPA Pre Shared Key in use for this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER hex(0), alphanumeric(1)  

enterpriseApSecurityWPAPSK 1.3.6.1.4.1.14823.2.3.2.14.1.1.8
This value indicates WPA Pre Shared Key in use for this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..80)  

enterpriseApSecurityWEPKeyType 1.3.6.1.4.1.14823.2.3.2.14.1.1.9
This value indicates the type of WEP Key in use for this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER hexadecimal(0), alphanumeric(1)  

enterpriseApSecurityWEPEnabled 1.3.6.1.4.1.14823.2.3.2.14.1.1.10
This value indicates whether WEP is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

enterpriseApSecurityWPACipherSuite 1.3.6.1.4.1.14823.2.3.2.14.1.1.11
This value indicates the type of WPA Cipher Suite in use for this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER aes-ccmp(0), tkip(1), wep(2)  

enterpriseApSecurityWPAPreAuthentication 1.3.6.1.4.1.14823.2.3.2.14.1.1.12
Whether Pre-Authentication is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApSecurityWPAPmksaLifetime 1.3.6.1.4.1.14823.2.3.2.14.1.1.13
The number (in minutes) for Pmksa-Lifetime.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..14400  

enterpriseApSsh 1.3.6.1.4.1.14823.2.3.2.14.2
OBJECT IDENTIFIER    

enterpriseApSshServerEnabled 1.3.6.1.4.1.14823.2.3.2.14.2.1
This value indicates whether SSH server is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

enterpriseApSshServerPort 1.3.6.1.4.1.14823.2.3.2.14.2.2
This value indicates SSH server's port number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Integer32  

enterpriseApSshTelnetServerEnabled 1.3.6.1.4.1.14823.2.3.2.14.2.3
This value indicates whether telnet server is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

enterpriseApRadioTable 1.3.6.1.4.1.14823.2.3.2.15.1
Table of descriptive and status information about configuration of each radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnterpriseApRadioEntry

enterpriseApRadioEntry 1.3.6.1.4.1.14823.2.3.2.15.1.1
An entry in the table, containing information about configuration of one radio of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  EnterpriseApRadioEntry  

enterpriseApRadioIndex 1.3.6.1.4.1.14823.2.3.2.15.1.1.1
Radio Index for configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

enterpriseApRadioState 1.3.6.1.4.1.14823.2.3.2.15.1.1.2
This value indicates the state of the radio interface.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApRadioAutoChannel 1.3.6.1.4.1.14823.2.3.2.15.1.1.3
This value indicates whether auto channel selection is enabled or not for this radio interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApRadioTransmitPower 1.3.6.1.4.1.14823.2.3.2.15.1.1.4
This value indicates the transmit power for this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER min(0), eighth(1), quarter(2), half(3), full(4)  

enterpriseApRadioClosedSystem 1.3.6.1.4.1.14823.2.3.2.15.1.1.5
This value indicates whether closed system is enabled for this radio interface.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApRadioMaxAssoc 1.3.6.1.4.1.14823.2.3.2.15.1.1.6
This value indicates the max number of clients allowed on this radio interface.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 1..64  

enterpriseApRadioTransmitKey 1.3.6.1.4.1.14823.2.3.2.15.1.1.7
This value indicates default transmit key in use for this radio interface.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

enterpriseApRadioTurboMode 1.3.6.1.4.1.14823.2.3.2.15.1.1.8
This value indicates whether turbo mode is enabled for this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), static-turbo(2), dynamic-turbo(3)  

enterpriseApRadioDescription 1.3.6.1.4.1.14823.2.3.2.15.1.1.9
This value indicates the description for this radio interface.
Status: obsolete Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..80)  

enterpriseApRadioDataRate 1.3.6.1.4.1.14823.2.3.2.15.1.1.10
This value indicates the data rate for this radio interface. Radio interface A operates at 6, 9, 12, 18, 24, 36, 48, 54. Radio interface G operates all listed data rates. The auto setting will attempt to set the best data rate for the interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER oneMbps(1), twoMbps(2), fiveAndHalfMbps(5), sixMbps(6), nineMbps(9), elevenMbps(11), twelveMbps(12), eighteenMbps(18), twentyFourMbps(24), thirtySixMbps(36), fourtyEightMbps(48), fiftyFourMbps(54), auto(255)  

enterpriseApRadioGMode 1.3.6.1.4.1.14823.2.3.2.15.1.1.11
This value indicates the radio mode for the 802.11g radio. This setting is only valid for the 802.11g interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER bOnly(1), gOnly(2), bg(3)  

enterpriseApRadioAntennaMode 1.3.6.1.4.1.14823.2.3.2.15.1.1.12
This value indicates the antenna mode in use for the G-radio. The values are interpreted as follows: fixed(1) means use both built-in antennas, external(2) means use one external antenna on the right side. This setting is only valid for the 802.11g interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fixed(1), external(2)  

enterpriseApRadioAntennaId 1.3.6.1.4.1.14823.2.3.2.15.1.1.13
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

enterpriseApRadioAntennaControlMethod 1.3.6.1.4.1.14823.2.3.2.15.1.1.14
This value indicates the antenna control method for the radio index. Diversity(1) AP select the antenna automatically. Left (2) Use the left antenna. Right (3) Use the right antenna.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER diversity(1), left(2), right(3)  

enterpriseApRadioAntennaLocation 1.3.6.1.4.1.14823.2.3.2.15.1.1.15
This value indicates the location of antenna for each radio index.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER indoor(1), outdoor(2)  

enterpriseApRadioRogueApDetection 1.3.6.1.4.1.14823.2.3.2.15.1.1.16
The status of Rogue AP detection for each index. enabled(1) To set rogue Ap detection enabled. disabled(2) To set rogue Ap detection disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApRadioRogueApScanInterval 1.3.6.1.4.1.14823.2.3.2.15.1.1.17
This value indicates the interval between each rogue AP scan.(unit: minutes)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30..10080  

enterpriseApRadioRogueApScanDuration 1.3.6.1.4.1.14823.2.3.2.15.1.1.18
This value indicates the rogue AP scan duratoin.(unit: minutes)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 100..1000  

enterpriseApRadioRogueApScanNow 1.3.6.1.4.1.14823.2.3.2.15.1.1.19
To force Ap to do rogue AP scan right away. enabled(1) To do Rogue AP scan right now. disabled(2) To set rogue Ap.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApRadioMICMode 1.3.6.1.4.1.14823.2.3.2.15.1.1.21
This value indicates the MIC mode status for this radio index. software(1) To set MIC mode to software. hardware(2) To set MIC mode to hardware.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER software(1), hardware(2)  

enterpriseApRadioSuperMode 1.3.6.1.4.1.14823.2.3.2.15.1.1.22
This value indicates the super mode status for this radio index. enabled (1) To set super mode enabled. disabled(2) To set super mode disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApRadioBeaconInterval 1.3.6.1.4.1.14823.2.3.2.15.1.1.23
This value indicates the beacon interval for this radio index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 20..1000  

enterpriseApRadioDataBeaconRate 1.3.6.1.4.1.14823.2.3.2.15.1.1.24
This value indicates the data beacon rate for the radio index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

enterpriseApRadioChannel 1.3.6.1.4.1.14823.2.3.2.15.1.1.25
This valud indicates the radio channel for the radio index. set channel 42/50/58/152/160 for static turbo mode, set channel 40/48/56/153/161 for dynamic turbo mode, set channel 36/40/44/48/52/56/60/64/149/153/157/161/165 when turbo mode is disabled. The value '0' indicates the radio interface cannot be enable in current country code.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

enterpriseApRadioFragmentLength 1.3.6.1.4.1.14823.2.3.2.15.1.1.26
This value indicates the fragment length for the radio index.(unit: Byte)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 256..2346  

enterpriseApRadioRTSThreshold 1.3.6.1.4.1.14823.2.3.2.15.1.1.27
This value indicates the RTS Threshold for the radio index.(unit: Byte)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2347  

enterpriseApRadioAntennaGainReduction 1.3.6.1.4.1.14823.2.3.2.15.1.1.28
This value indicates the antenna gain reduction for the radio index.(unit: dB)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..29  

enterpriseApSNMPCommunityReadOnly 1.3.6.1.4.1.14823.2.3.2.16.1
The SNMP Read Only Community. The value if read, will only show ******.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

enterpriseApSNMPCommunityReadWrite 1.3.6.1.4.1.14823.2.3.2.16.2
The SNMP Read Write Community. The value if read, will only show *****.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

enterpriseApSNMPTrapDestinationTable 1.3.6.1.4.1.14823.2.3.2.16.3
Table of descriptive and status information about configuration of each trap receiving server.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnterpriseApSNMPTrapDestinationEntry

enterpriseApSNMPTrapDestinationEntry 1.3.6.1.4.1.14823.2.3.2.16.3.1
An entry in the table, containing information about configuration of one trap receiving server.
Status: current Access: not-accessible
OBJECT-TYPE    
  EnterpriseApSNMPTrapDestinationEntry  

enterpriseApSNMPTrapDestinationIndex 1.3.6.1.4.1.14823.2.3.2.16.3.1.1
Index of the Trap Destination Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4  

enterpriseApSNMPTrapDestinationCommunity 1.3.6.1.4.1.14823.2.3.2.16.3.1.2
The SNMP Trap Community
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

enterpriseApSNMPTrapDestinationIP 1.3.6.1.4.1.14823.2.3.2.16.3.1.3
The IP address of the trap receiving server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

enterpriseApSNMPTrapDestinationState 1.3.6.1.4.1.14823.2.3.2.16.3.1.4
This value indicates whether the trap receiving server is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApSNMPTrapFilters 1.3.6.1.4.1.14823.2.3.2.16.4
OBJECT IDENTIFIER    

sysSystemUpTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.1
This value indicates whether the sysSystemUp trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

sysSystemDownTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.2
This value indicates whether the sysSystemDowntrap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

sysRadiusServerChangedTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.3
This value indicates whether the sysRadiusServerChanged trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

sysConfigFileVersionChangedTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.4
This value indicates whether the sysConfigFileVersionChanged trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot11StationAssociationTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.5
This value indicates whether the dot11StationAssociation trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot11StationReAssociationTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.6
This value indicates whether the dot11StationReAssociation trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot11StationAuthenticationTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.7
This value indicates whether the dot11StationAuthentication trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot11StationRequestFailTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.8
This value indicates whether the dot11StationRequestFail trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot11InterfaceBFailTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.9
This value indicates whether the dot11InterfaceBFail trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot11InterfaceAGFailTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.10
This value indicates whether the dot11InterfaceAGFail trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot1xMacAddrAuthSuccessTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.11
This value indicates whether the dot1xMacAddrAuthSuccess trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot1xMacAddrAuthFailTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.12
This value indicates whether the dot1xMacAddrAuthFail trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot1xAuthNotInitiatedTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.13
This value indicates whether the dot1xAuthNotInitiated trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot1xAuthSuccessTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.14
This value indicates whether the dot1xAuthSuccess trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot1xAuthFailTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.15
This value indicates whether the dot1xAuthFail trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

localMacAddrAuthSuccessTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.16
This value indicates whether the localMacAddrAuthSuccess trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

localMacAddrAuthFailTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.17
This value indicates whether the localMacAddrAuthFail trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pppLogonFailTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.18
This value indicates whether the pppLogonFail trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

iappStationRoamedFromTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.19
This value indicates whether the iappStationRoamedFrom trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

iappStationRoamedToTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.20
This value indicates whether the iappStationRoamedTo trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

iappContextDataSentTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.21
This value indicates whether the iappContextDataSent trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

sntpServerFailTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.22
This value indicates whether the sntpServerFail trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot1xSuppAuthenticatedTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.23
This value indicates whether the dot1xSupplicantAuthenticated trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot11FailedTransmitsTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.24
This value indicates whether the dot11FailedTransmitsTrapEnabled trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot11AckFailuresTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.25
This value indicates whether the dot11AckFailuresTrapEnabled trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot11FcsErrorsTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.26
This value indicates whether the dot11FcsErrorsTrapEnabled trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

rogueAPDetectedTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.27
This value indicates whether the RogueAPDetectedTrapEnabled trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

possibleRogueAPDetectedTrapEnabled 1.3.6.1.4.1.14823.2.3.2.16.4.28
This value indicates whether the RogueAPDetectedTrapEnabled trap is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApSessionTable 1.3.6.1.4.1.14823.2.3.2.17.1
This table list all sessions (wireless stations) status
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnterpriseApSessionEntry

enterpriseApSessionEntry 1.3.6.1.4.1.14823.2.3.2.17.1.1
An entry in the table, containing information about status and statistics of the wireless station.
Status: current Access: not-accessible
OBJECT-TYPE    
  EnterpriseApSessionEntry  

enterpriseApSessionIfIndex 1.3.6.1.4.1.14823.2.3.2.17.1.1.1
Interface index for the radio this session is associated with.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

enterpriseApSessionStationAddres 1.3.6.1.4.1.14823.2.3.2.17.1.1.2
The unique MAC Address of the station for this session.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

enterpriseApSessionAuthenticated 1.3.6.1.4.1.14823.2.3.2.17.1.1.3
Whether the session is authenticated or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

enterpriseApSessionAssociated 1.3.6.1.4.1.14823.2.3.2.17.1.1.4
Whether the session is associated or not. It is rare case that not associated stations show up in the table.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

enterpriseApSessionIsForwarding 1.3.6.1.4.1.14823.2.3.2.17.1.1.5
Whether the AP is forwarding the client station traffic (higher level authentication)
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

enterpriseApSessionKeyType 1.3.6.1.4.1.14823.2.3.2.17.1.1.6
The encryption key type used by the station. Note that wpa-wep is not supported
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), staticWep(2), dynamicWep(3), wpaWep(4), wpaTkip(5), wpaAes(6)  

enterpriseApSessionAssociationId 1.3.6.1.4.1.14823.2.3.2.17.1.1.7
The internal association identify number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

enterpriseApSessionLastAuthenticatedTime 1.3.6.1.4.1.14823.2.3.2.17.1.1.8
This is the time in hundredths of a second last time the client is authenticated. Note that a session may be authenticated multiple times. The value is related to the system startup
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

enterpriseApSessionAssociatedTime 1.3.6.1.4.1.14823.2.3.2.17.1.1.9
This is the time in hundredths of a second since the client associated. The value is related to the system startup
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

enterpriseApSessionLastAssociatedTime 1.3.6.1.4.1.14823.2.3.2.17.1.1.10
This is the time in hundredths of a second when the client associated in last session. The value is related to the system startup
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

enterpriseApSessionLastDisassociatedTime 1.3.6.1.4.1.14823.2.3.2.17.1.1.11
This is the time in hundredths of a second when the client disassociated in last session. The value is related to the system startup
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

enterpriseApSessionTxPacketCount 1.3.6.1.4.1.14823.2.3.2.17.1.1.12
This is the number of packets transmitted from the client to the AP. It includes data, control and management packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

enterpriseApSessionRxPacketCount 1.3.6.1.4.1.14823.2.3.2.17.1.1.13
This is the number of unicast packets transmitted from the AP to the client. It includes data, control and management packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

enterpriseApSessionTxByteCount 1.3.6.1.4.1.14823.2.3.2.17.1.1.14
This is the number of bytes transmitted from the client to the AP. It includes the bytes of data, control and management packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

enterpriseApSessionRxByteCount 1.3.6.1.4.1.14823.2.3.2.17.1.1.15
This is the number of unicast bytes transmitted from the AP to the client. It includes the bytes of data, control and management packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

enterpriseAPVapRadioTable 1.3.6.1.4.1.14823.2.3.2.20.1
Table of descriptive and status information about configuration of each radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnterpriseAPVapRadioEntry

enterpriseAPVapRadioEntry 1.3.6.1.4.1.14823.2.3.2.20.1.1
An entry in the table, containing information about configuration of one radio of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  EnterpriseAPVapRadioEntry  

enterpriseAPVapRadioIndex 1.3.6.1.4.1.14823.2.3.2.20.1.1.1
Radio Index for configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

enterpriseAPVapRadioState 1.3.6.1.4.1.14823.2.3.2.20.1.1.2
This value indicates the state of the radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseAPVapRadioClosedSystem 1.3.6.1.4.1.14823.2.3.2.20.1.1.3
This value indicates whether closed system is enabled for this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseAPVapRadioMaxAssoc 1.3.6.1.4.1.14823.2.3.2.20.1.1.4
This value indicates the max number of clients allowed on this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..64  

enterpriseAPVapRadioTransmitKey 1.3.6.1.4.1.14823.2.3.2.20.1.1.5
This value indicates default transmit key in use for this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

enterpriseAPVapRadioDescription 1.3.6.1.4.1.14823.2.3.2.20.1.1.6
This value indicates the description for this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..80)  

enterpriseAPVapRadioAuthTimeoutInterval 1.3.6.1.4.1.14823.2.3.2.20.1.1.8
This value indicates the Authentication Timeout interval for this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..60  

enterpriseAPVapRadioAssocTimeoutInterval 1.3.6.1.4.1.14823.2.3.2.20.1.1.9
This value indicates the Association Timeout interval for this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..60  

enterpriseAPVapRadioWPA2PMKSALifeTime 1.3.6.1.4.1.14823.2.3.2.20.1.1.10
This value indicates the WPA2 PMSA Life Time for this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1440  

enterpriseApRadioWdsTable 1.3.6.1.4.1.14823.2.3.2.22.1
Table of configuration information for Wds for each Radio interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnterpriseApRadioWdsEntry

enterpriseApRadioWdsEntry 1.3.6.1.4.1.14823.2.3.2.22.1.1
An entry in the table, containing information about configuration of peer Bridging for one radio of the AP. The table is indexed by radio Index (corresponding to enterpriseApRadioTable). The table does not contain the radio index as a member of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EnterpriseApRadioWdsEntry  

wdsApRole 1.3.6.1.4.1.14823.2.3.2.22.1.1.1
This value indicates the role of the Ap for this radio, roleAp(1): AP operation. roleBridgeMaster(2): Root-Bridge mode. roleBridge(4): Bridge Mode. relay wireless traffic.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER roleAp(1), roleBridgeMaster(2), roleBridge(4)  

wdsChannelAutoSync 1.3.6.1.4.1.14823.2.3.2.22.1.1.3
This value indicates the states of channel auto synchronize for this radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wdsMasterSlaveMode 1.3.6.1.4.1.14823.2.3.2.22.1.1.4
This value indicates the Master/Slave mode for this radio. master (1) To set to master mode. slave (2) To set to slave mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER master(1), slave(2)  

enterpriseApRadioWdsPeerTable 1.3.6.1.4.1.14823.2.3.2.22.2
Table of configuration information for Wds Peers for each Radio interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnterpriseApRadioWdsPeerEntry

enterpriseApRadioWdsPeerEntry 1.3.6.1.4.1.14823.2.3.2.22.2.1
An entry in the table, containing information about configuration of peer Bridging for one radio of the AP. The table is indexed by radio Index (corresponding to enterpriseApRadioTable) and the peer index (Up to 8). The table does not contain the radio index as a member of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EnterpriseApRadioWdsPeerEntry  

wdsPeerIndex 1.3.6.1.4.1.14823.2.3.2.22.2.1.1
Peer Index for the radio interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

wdsPeerBssid 1.3.6.1.4.1.14823.2.3.2.22.2.1.2
The BSSID for this peer.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..6)  

enterpriseApWMMTable 1.3.6.1.4.1.14823.2.3.2.24.1
The table of WMM information for each radio interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnterpriseApWMMEntry

enterpriseApWMMEntry 1.3.6.1.4.1.14823.2.3.2.24.1.1
An entry of table, contains the WMM information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EnterpriseApWMMEntry  

enterpriseApWMMModeIndex 1.3.6.1.4.1.14823.2.3.2.24.1.1.1
Peer Index for the radio interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

enterpriseApWMMMode 1.3.6.1.4.1.14823.2.3.2.24.1.1.2
This value indicates the WMM mode for the radio interface. disabled(1) To set WMM mode disabled. support (2) To set WMM mode supported. required(3) To set WMM mode required.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), support(2), required(3)  

enterpriseApWMMAckPolicyTable 1.3.6.1.4.1.14823.2.3.2.24.2
The table of WMM Ack Policy information for each ac number on the radio interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnterpriseApWMMAckPolicyEntry

enterpriseApWMMAckPolicyEntry 1.3.6.1.4.1.14823.2.3.2.24.2.1
An entry of table, contains the WMM Ack Policy information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EnterpriseApWMMAckPolicyEntry  

enterpriseApWMMAckPolicyIndex 1.3.6.1.4.1.14823.2.3.2.24.2.1.1
The value indicates the AC number for each radio interface. 0 --> AC0 (Best Effect) 1 --> AC1 (Background) 2 --> AC2 (Video) 3 --> AC3 (Voice)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

enterpriseApWMMACKPolicy 1.3.6.1.4.1.14823.2.3.2.24.2.1.2
This value indicates WMM Ack Policy state of each ac number for the radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER acknowledge(1), noAcknowledge(2)  

enterpriseApWMMBSSParamTable 1.3.6.1.4.1.14823.2.3.2.24.3
The table of WMM BSS parameter information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnterpriseApWMMBSSParamEntry

enterpriseApWMMBSSParamEntry 1.3.6.1.4.1.14823.2.3.2.24.3.1
An entry of table, contains the WMM BSS parameter information for each ac number on the radio interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  EnterpriseApWMMBSSParamEntry  

enterpriseApWMMBSSParamIndex 1.3.6.1.4.1.14823.2.3.2.24.3.1.1
The value indicates the AC number for each radio interface. 0 --> AC0 (Best Effort) 1 --> AC1 (Background) 2 --> AC2 (Video) 3 --> AC3 (Voice)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

enterpriseApWMMBSSParamLogCwMin 1.3.6.1.4.1.14823.2.3.2.24.3.1.2
This value indicates the WMM BSS parameter logCwMin of AC number for the radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..15  

enterpriseApWMMBSSParamLogCwMax 1.3.6.1.4.1.14823.2.3.2.24.3.1.3
This value indicates the WMM BSS parameter logCwMax of each AC number for the radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..15  

enterpriseApWMMBSSParamAIFSN 1.3.6.1.4.1.14823.2.3.2.24.3.1.4
This value indicates the WMM BSS parameters AIFSN of each AC number for the radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..15  

enterpriseApWMMBSSParamTXOPLimit 1.3.6.1.4.1.14823.2.3.2.24.3.1.5
This value indicates the WMM BSS parameters TXOP Limit of each AC number for the radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

enterpriseApWMMBSSParamAdmissionCtrl 1.3.6.1.4.1.14823.2.3.2.24.3.1.6
This value indicates the BSS parameters Admission Control of each AC number for the radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ebabled(1), disabled(2)  

enterpriseApWMMAPParamTable 1.3.6.1.4.1.14823.2.3.2.24.4
The table of configuration information for WMM AP parameters for each ac number on the radio interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnterpriseApWMMAPParamEntry

enterpriseApWMMAPParamEntry 1.3.6.1.4.1.14823.2.3.2.24.4.1
An entry table, include the Ap parameter information for each ac numbers.
Status: current Access: not-accessible
OBJECT-TYPE    
  EnterpriseApWMMAPParamEntry  

enterpriseApWMMAPParamIndex 1.3.6.1.4.1.14823.2.3.2.24.4.1.1
The value indicates the AC number for each radio interface. 0 --> AC0 (Best Effort) 1 --> AC1 (Background) 2 --> AC2 (Video) 3 --> AC3 (Voice)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

enterpriseApWMMAPParamLogCwMin 1.3.6.1.4.1.14823.2.3.2.24.4.1.2
This value indicates the LogCwMin of AP parameter for each AC number on the radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..15  

enterpriseApWMMAPParamLogCwMax 1.3.6.1.4.1.14823.2.3.2.24.4.1.3
This value indicates the LogCwMax of AP parameter for each AC number on the radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..15  

enterpriseApWMMAPParamAIFSN 1.3.6.1.4.1.14823.2.3.2.24.4.1.4
This value indicates the AIFSN of AP parameter for each AC number on the radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..15  

enterpriseApWMMAPParamTXOPLimit 1.3.6.1.4.1.14823.2.3.2.24.4.1.5
This value indicates the TXOP Limit of AP parameter for each AC number on the radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

enterpriseApWMMAPParamAdmissionCtrl 1.3.6.1.4.1.14823.2.3.2.24.4.1.6
This value indicates the admission control of AP parameter for each AC number on the radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ebabled(1), disabled(2)  

enterpriseApSTPBridgeStatus 1.3.6.1.4.1.14823.2.3.2.25.1
This value indicates the STP bridge status for the radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

enterpriseApSTPBridgePriority 1.3.6.1.4.1.14823.2.3.2.25.2
This value indicates the STP bridge priority for the radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

enterpriseApSTPBridgeMaxAge 1.3.6.1.4.1.14823.2.3.2.25.3
This value indicates the STP bridge max age for the radio interface.(unit: second)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 6..40  

enterpriseApSTPHelloTime 1.3.6.1.4.1.14823.2.3.2.25.4
This value indicates the STP hello time for the radio interface.(unit: second)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..10  

enterpriseApSTPBridgeForwardingDelay 1.3.6.1.4.1.14823.2.3.2.25.5
This value indicates the STP forwarding delay for the radio interface.(unit: second)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 4..30  

enterpriseApSTPRadioInterface 1.3.6.1.4.1.14823.2.3.2.25.6
OBJECT IDENTIFIER    

enterpriseApSTPNodeTable 1.3.6.1.4.1.14823.2.3.2.25.6.1
The table of STP link Path Cost and link port priority information for each nodes on radio interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnterpriseApSTPNodeEntry

enterpriseApSTPNodeEntry 1.3.6.1.4.1.14823.2.3.2.25.6.1.1
An entry in a table, contain the link path cost and link port priroity information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EnterpriseApSTPNodeEntry  

enterpriseApSTPNodeIndex 1.3.6.1.4.1.14823.2.3.2.25.6.1.1.1
Peer Index for the nodes on the radio interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

enterpriseApSTPNodeLinkPathCost 1.3.6.1.4.1.14823.2.3.2.25.6.1.1.2
This value indicates the link path cost for the node on this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

enterpriseApSTPNodeLinkPortPriority 1.3.6.1.4.1.14823.2.3.2.25.6.1.1.3
This value indicates the link path cost for the node on this radio interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

enterpriseApSTPEthernetInterface 1.3.6.1.4.1.14823.2.3.2.25.7
OBJECT IDENTIFIER    

enterpriseApSTPEthernetLinkPathCost 1.3.6.1.4.1.14823.2.3.2.25.7.1
This value indicates link path cost for ethernet interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

enterpriseApSTPEthernetLinkPortPriority 1.3.6.1.4.1.14823.2.3.2.25.7.2
This value indicates link port prirorty for ethernet interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255