ARRIS-C3-MAC-MIB

File: ARRIS-C3-MAC-MIB.mib (44918 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	IF-MIB
DOCS-IF-MIB	ARRIS-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Unsigned32
Integer32	TEXTUAL-CONVENTION	TimeInterval
RowStatus	TruthValue	DisplayString
ifIndex	TenthdBmV	TenthdB
cmtsC3

Defined Types

DocsisMacType
Indicates the DOCSIS Channel Type.
TEXTUAL-CONVENTION
	INTEGER	docsis(1), euroDocsis(2), mixed(3), custom(4)

DcxMACCmtsMacEntry
SEQUENCE
	dcxMACCmtsMacMode	DocsisMacType
	dcxMACCableAdvanceType	INTEGER
	dcxMACPlantLength	Unsigned32
	dcxMACFlapAgingTime	Unsigned32
	dcxMACFlapInsertTime	Unsigned32
	dcxMACFlapMissThresh	Unsigned32
	dcxMACFlapListSize	Unsigned32
	dcxMACCmOfflineAgingTime	Unsigned32
	dcxMACUccMaxFailedAttempts	Unsigned32

DcxMACDownstreamChannelEntry
SEQUENCE
	dcxMACDownChannelMacMode	DocsisMacType
	dcxMACDownChannelUpconverter	INTEGER
	dcxMACDownChannelIfFrequency	Integer32
	dcxMACDownChannelWirelessMode	INTEGER
	dcxMACDownChannelSymbolRate	Integer32
	dcxMACDownChannelAlpha	Integer32

DcxMACUpstreamChannelEntry
SEQUENCE
	dcxMACUpChannelMacMode	DocsisMacType
	dcxMACUpChannelAmpAttenuation	TenthdBmV
	dcxMACUpChannelIngressCancellation	INTEGER
	dcxMACUpChannelGroupId	Unsigned32
	dcxMACUpChannelShortPollInterval	TimeInterval
	dcxMACUpChannelPeriodicPollInterval	TimeInterval
	dcxMACUpChannelInputPowerMode	INTEGER
	dcxMACUpChannelPower	TenthdBmV
	dcxMACUpChannelPlantLength	Unsigned32
	dcxMACUpChannelMaxCmMapProcTime	Unsigned32
	dcxMACUpChannelConcatenation	TruthValue
	dcxMACUpChannelSpMgtTriggerIndex	Unsigned32
	dcxMACUpChannelLowPowerOffset	TenthdBmV
	dcxMACUpChannelHighPowerOffset	TenthdBmV
	dcxMACUpChannelLogSnrAveTimeconstant	Unsigned32
	dcxMACUpChannelImpulseMitigation	INTEGER
	dcxMACUpChannelRngPreambleGuardSymbols	Unsigned32
	dcxMACUpChannelNrngPreambleGuardSymbols	Unsigned32
	dcxMACUpChannelExtendedFrequencyErrorDetect	INTEGER
	dcxMACUpChannelLogC3SnrTimeconstant	Unsigned32
	dcxMACUpChannelSignalNoise	TenthdB
	dcxMACUpChannelSafeConfig	TruthValue
	dcxMACUpChannelInitialRangingDelay	Unsigned32

DcxMACUpstreamGroupEntry
SEQUENCE
	dcxMACUpstreamGroupId	Unsigned32
	dcxMACUpstreamGroupName	OCTET STRING
	dcxMACUpstreamGroupLoadBalancing	INTEGER
	dcxMACUpstreamGroupFrequencyIndex	Unsigned32
	dcxMACUpstreamGroupSpMgtTriggerIndex	Unsigned32
	dcxMACUpstreamGroupStatus	RowStatus

DcxMACUpstreamFrequencyEntry
SEQUENCE
	dcxMACUpstreamFrequencyIndex	Unsigned32
	dcxMACUpstreamFrequencyRegion	Unsigned32
	dcxMACUpstreamFrequencyStart	Integer32
	dcxMACUpstreamFrequencyStop	Integer32
	dcxMACUpstreamFrequencyStatus	RowStatus

DcxMACSpectralMgtTriggerEntry
SEQUENCE
	dcxMACSpMgtTriggerIndex	Unsigned32
	dcxMACSpMgtTriggerNumber	Unsigned32
	dcxMACSpMgtTriggerType	Integer32
	dcxMACSpMgtTriggerAction	Unsigned32
	dcxMACSpMgtTriggerParam1	Integer32
	dcxMACSpMgtTriggerParam2	Integer32
	dcxMACSpMgtTriggerParam3	Integer32
	dcxMACSpMgtTriggerParam4	Integer32
	dcxMACSpMgtTriggerParam5	Integer32
	dcxMACSpMgtTriggerParam6	Integer32
	dcxMACSpMgtTriggerParam7	Integer32
	dcxMACSpMgtTriggerParam8	Integer32
	dcxMACSpMgtTriggerStatus	RowStatus

DcxMACSpectralMgtActionEntry
SEQUENCE
	dcxMACSpMgtActionIndex	Unsigned32
	dcxMACSpMgtActionType	Integer32
	dcxMACSpMgtActionParam1	Integer32
	dcxMACSpMgtActionParam2	Integer32
	dcxMACSpMgtActionParam3	Integer32
	dcxMACSpMgtActionParam4	Integer32
	dcxMACSpMgtActionParam5	Integer32
	dcxMACSpMgtActionParam6	Integer32
	dcxMACSpMgtActionParam7	Integer32
	dcxMACSpMgtActionParam8	Integer32
	dcxMACSpMgtActionStatus	RowStatus

DcxMACSharedSecretEntry
SEQUENCE
	dcxMACSharedSecretId	Integer32
	dcxMACSharedSecretStr	DisplayString
	dcxMACSharedSecretStatus	RowStatus

Defined Values

cmtsC3MACMIB		1.3.6.1.4.1.4115.1.4.3.6
This MIB manages the MAC software on the Cadant C3 CMTS.
MODULE-IDENTITY

dcxMACObjects		1.3.6.1.4.1.4115.1.4.3.6.1
OBJECT IDENTIFIER

dcxMACCmtsMacTable		1.3.6.1.4.1.4115.1.4.3.6.1.1
Additional columns for docsIfCmtsMacTable. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DcxMACCmtsMacEntry

dcxMACCmtsMacEntry		1.3.6.1.4.1.4115.1.4.3.6.1.1.1
dcxMACCmtsMacEntry
Status: current	Access: not-accessible
OBJECT-TYPE
	DcxMACCmtsMacEntry

dcxMACCmtsMacMode		1.3.6.1.4.1.4115.1.4.3.6.1.1.1.1
Indicates the mode in which the MAC is operating. A read to this value may return any of the modes defined by DocsisMacType. Only the modes docsis, euroDocsis and mixed may be written. When set to docsis or euroDocsis, all downstream and upstream channels in this MAC domain will be configured in DOCSIS or EuroDOCSIS mode respectively. When set to mixed, the downstream channels will be configured in DOCSIS and the upstream channels will be running in EuroDOCSIS mode. The value custom will be returned in a read operation if any of the underlying channels has been reconfigured in such a way that the MAC can not be described a docsis, euroDocsis or mixed.
Status: current	Access: read-write
OBJECT-TYPE
	DocsisMacType

dcxMACCableAdvanceType		1.3.6.1.4.1.4115.1.4.3.6.1.1.1.2
Cable Map Advance Type - 0 for Static, 1 for Dynamic.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	static(0), dynamic(1)

dcxMACPlantLength		1.3.6.1.4.1.4115.1.4.3.6.1.1.1.3
Cable Plant Length (1-way) in kilometers.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..161

dcxMACFlapAgingTime		1.3.6.1.4.1.4115.1.4.3.6.1.1.1.4
Cable Flap List Aging Time in seconds.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..864000

dcxMACFlapInsertTime		1.3.6.1.4.1.4115.1.4.3.6.1.1.1.5
Cable Flap List Insertion Time threshold in seconds.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..86400

dcxMACFlapMissThresh		1.3.6.1.4.1.4115.1.4.3.6.1.1.1.6
Cable Flap List Miss Threshold in misses.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..12

dcxMACFlapListSize		1.3.6.1.4.1.4115.1.4.3.6.1.1.1.8
Cable Flap List Maximum Number of Entries.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..6000

dcxMACCmOfflineAgingTime		1.3.6.1.4.1.4115.1.4.3.6.1.1.1.9
Cable modem offline aging time in seconds. Minimum value is 1 hour. Maximum time before aging a modem is 10 days. Default value is 24 hours.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	3600..864000

dcxMACUccMaxFailedAttempts		1.3.6.1.4.1.4115.1.4.3.6.1.1.1.10
Maximum number of consecutive failed channel change attempts that a modem is allowed before the CMTS decides to no longer use the modem for load balancing purposes. If a modem successfully completes a channel change before the maximum number of attempts is reached, the number of consecutive failed attempts for the modem is reset. A value of 0 indicates no limit.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

dcxMACDownstreamChannelTable		1.3.6.1.4.1.4115.1.4.3.6.1.2
Additional columns for docsIfDownstreamChannelTable. An entry in this table exists for each ifEntry with an ifType of docsCableDownstream(128).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DcxMACDownstreamChannelEntry

dcxMACDownstreamChannelEntry		1.3.6.1.4.1.4115.1.4.3.6.1.2.1
dcxMACDownstreamChannelEntry
Status: current	Access: not-accessible
OBJECT-TYPE
	DcxMACDownstreamChannelEntry

dcxMACDownChannelMacMode		1.3.6.1.4.1.4115.1.4.3.6.1.2.1.1
Configures the downstream to DOCSIS or EuroDOCSIS. When dcxMACDownChannelWirelessMode is disabled, changes to this will impact the downstream annex type, modulation, symbol rate and interleaver. When wireless mode is enabled, only the annex type and interleaver will be changed.
Status: current	Access: read-write
OBJECT-TYPE
	DocsisMacType

dcxMACDownChannelUpconverter		1.3.6.1.4.1.4115.1.4.3.6.1.2.1.2
Controls whether or not the internal upconverter is used. If set to internal, the downstream IF frequency will operate in read-only mode and will be configured internally by the CMTS based on the downstream channel configuration. If set to external, the IF frequency may be programmed to set the frequency supplied to an external upconverter via the IF output. In this mode, the downstream RF frequency and power will both return 0 when read.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	internal(1), external(2)

dcxMACDownChannelIfFrequency		1.3.6.1.4.1.4115.1.4.3.6.1.2.1.3
The IF frequency output by the modulator for this channel.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	10000000..60000000

dcxMACDownChannelWirelessMode		1.3.6.1.4.1.4115.1.4.3.6.1.2.1.4
Enabling this mode allows non-standard downstream modulations and symbol rates to be configured which are suitable when using the CMTS in a wireless application. Changes to dcxMACDownChannelMacMode when wireless mode is active will only impact the downstream annex type and interleaver settings. Modulation and symbol rates will only be affected when wireless mode is disabled. Disabling wireless mode will reset any non-standard modulation and symbol rates settings in order to restore a standard DOCSIS or EuroDOCSIS downstream. If a set to active fails, a license may be required to activate the feature.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

dcxMACDownChannelSymbolRate		1.3.6.1.4.1.4115.1.4.3.6.1.2.1.5
Sets the downstream symbol rate.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1250000..6952000

dcxMACDownChannelAlpha		1.3.6.1.4.1.4115.1.4.3.6.1.2.1.6
The percentage of excess bandwidth for the channel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

dcxMACUpstreamChannelTable		1.3.6.1.4.1.4115.1.4.3.6.1.3
Additional columns for docsIfUpstreamChannelTable. An entry in this table exists for each ifEntry with an ifType of docsCableUpstream(129).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DcxMACUpstreamChannelEntry

dcxMACUpstreamChannelEntry		1.3.6.1.4.1.4115.1.4.3.6.1.3.1
dcxMACUpstreamChannelEntry
Status: current	Access: not-accessible
OBJECT-TYPE
	DcxMACUpstreamChannelEntry

dcxMACUpChannelMacMode		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.1
Indicates the mode in which this upstream is operating. A read or write to this may consist only of the values docsis or euroDocsis.
Status: current	Access: read-write
OBJECT-TYPE
	DocsisMacType

dcxMACUpChannelAmpAttenuation		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.2
The amplifier attenuation level for this logical channel.
Status: current	Access: read-write
OBJECT-TYPE
	TenthdBmV

dcxMACUpChannelIngressCancellation		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.3
Sets the ingress noise cancellation mode for this logical channel. Not all modes may be valid for a given logical channel configuration or hardware.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), tdmaOnly(2), scdmaSec(3), scdmaInc1(4), scdmaInc2(5)

dcxMACUpChannelGroupId		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.4
The group ID for this logical channel used to associate it with other upsteams on the same physical network. The group ID is an index into the dcxMACUpstreamGroupTable which defines common parameters for grouped upsteams. Upstreams do not have to be grouped and there may be more than one group on the same physical network. Spatially diverse upstreams should not have the same group ID.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

dcxMACUpChannelShortPollInterval		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.5
The short interval for initial unicast maintanance on this logical channel.
Status: current	Access: read-write
OBJECT-TYPE
	TimeInterval	1..100

dcxMACUpChannelPeriodicPollInterval		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.6
The periodic station maintanance interval on this logical channel.
Status: current	Access: read-write
OBJECT-TYPE
	TimeInterval	100..10000

dcxMACUpChannelInputPowerMode		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.7
The receiver input power mode for this logical channel. In fixed mode the input power to the demodulator will remain fixed across symbol rate changes. In automatic mode the demodulator may vary the input power for optimal performance.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	fixed(1), automatic(2)

dcxMACUpChannelPower		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.8
The nominal receiver input power for this logical channel.
Status: current	Access: read-write
OBJECT-TYPE
	TenthdBmV

dcxMACUpChannelPlantLength		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.9
The cable length in km to the most distant CM on this logical upstream.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..320

dcxMACUpChannelMaxCmMapProcTime		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.10
The maximum time in microseconds allowed for modems on this logical channel to process the Upstream Bandwidth Allocation MAP.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..1000000

dcxMACUpChannelConcatenation		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.11
Enables or disables the use of packet concatenation by Cable Modems on this logical channel.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

dcxMACUpChannelSpMgtTriggerIndex		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.12
An index into spectral management trigger table, identical to dcxMACSpMgtTriggerIndex in that table. All entries with the same value of dcxMACSpMgtTriggerIndex form a trigger group all assigned to the same logical upstream channel or group. Returns 0 if there are no triggers assigned to this logical channel.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..255

dcxMACUpChannelLowPowerOffset		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.13
The maximum power offset of a burst below the nominal input power to the CMTS that will not cause a RNG-RSP with status continue. Valid range is from -10 dBmV to -1 dBmV in 1 dB increments.
Status: current	Access: read-write
OBJECT-TYPE
	TenthdBmV	-100..-10

dcxMACUpChannelHighPowerOffset		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.14
The maximum power offset of a burst above the nominal input power to the CMTS that will not cause a RNG-RSP with status continue. Valid range is from +1 dBmV to +10 dBmV in 1 dB increments.
Status: current	Access: read-write
OBJECT-TYPE
	TenthdBmV	10..100

dcxMACUpChannelLogSnrAveTimeconstant		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.15
The averaging timeconstant used to calculate the per-logical channel MIB variable docsIfSigQSignalNoise. The averaging uses a logarithmic scale, so that the actual timeconstant used is 2^X, where X is the value configured for this object. Increasing the value of X increases the degree to which the SNR results are averaged over time, and reduces the sensitivity of the reported channel SNR to local oscillations in signal quality. Averaging can effectively be disabled by setting this object to 0
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	0..10

dcxMACUpChannelImpulseMitigation		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.16
Enables or disables impulse noise mitigation for this logical channel.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

dcxMACUpChannelRngPreambleGuardSymbols		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.17
Number of guard symbols before the preamble pilot pattern for ranging bursts. Guard symbols may help the receiver to mitigate the effects of ISI and\or help with the detection of bursts with an early arrival time
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

dcxMACUpChannelNrngPreambleGuardSymbols		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.18
Number of guard symbols before the preamble pilot pattern for non-ranging bursts. Guard symbols may help the receiver to mitigate the effects of ISI and\or help with the detection of bursts with an early arrival time
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

dcxMACUpChannelExtendedFrequencyErrorDetect		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.19
Offsets in carrier frequency in the modem are corrected by the CMTS during ranging. Typically most if not all off the frequency error is removed in the initial ranging response with incremental changes removed during periodic ranging. If large frequency offsets are expected during initial or periodic ranging, this value may be configured to provide extended frequency offset detection and correction.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), initialRanging(1), periodicRanging(2), allRanging(3)

dcxMACUpChannelLogC3SnrTimeconstant		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.20
The averaging timeconstant used to calculate the per-logical channel MIB variable dcxMACUpChannelSignalNoise. The averaging uses a logarithmic scale, so that the actual timeconstant used is 2^X, where X is the value configured for this object. Increasing the value of X increases the degree to which the SNR results are averaged over time, and reduces the sensitivity of the reported channel SNR to local oscillations in signal quality. Averaging can effectively be disabled by setting this object to 0
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

dcxMACUpChannelSignalNoise		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.21
A measurement of the average signal/noise ratio for the logical upstream. The averaging may be controlled using the dcxMACUpChannelLogC3SnrTimeconstant variable
Status: current	Access: read-only
OBJECT-TYPE
	TenthdB

dcxMACUpChannelSafeConfig		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.22
If true, MIB SETs which would cause this logical channel to go offline will return a failure
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

dcxMACUpChannelInitialRangingDelay		1.3.6.1.4.1.4115.1.4.3.6.1.3.1.23
The number of extra microseconds to allow in a broadcast IUC3 grant to compensate for modems that perform initial ranging later than expected.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	300..3000

dcxMACUpstreamGroupTable		1.3.6.1.4.1.4115.1.4.3.6.1.4
Entries containing definitions for group IDs that can be associated with an upstream channel.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DcxMACUpstreamGroupEntry

dcxMACUpstreamGroupEntry		1.3.6.1.4.1.4115.1.4.3.6.1.4.1
dcxMACUpstreamGroupEntry
Status: current	Access: not-accessible
OBJECT-TYPE
	DcxMACUpstreamGroupEntry

dcxMACUpstreamGroupId		1.3.6.1.4.1.4115.1.4.3.6.1.4.1.1
The ID for this group.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..255

dcxMACUpstreamGroupName		1.3.6.1.4.1.4115.1.4.3.6.1.4.1.2
The name associated with this group
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..63)

dcxMACUpstreamGroupLoadBalancing		1.3.6.1.4.1.4115.1.4.3.6.1.4.1.3
Configures upstream load balancing for the group. Options are: none, initialNumeric, periodic. If set to none, no load balancing will be performed. If set to initialNumeric, the CMTS may redirect modems to other active upstream channels in the same group by setting the upstream channel ID override in the RNG-RSP at any time up to the point where the modem successfully completes periodic ranging. Once a modem has completed ranging it must be reset before it may be moved to another upstream. The modems in a group will be distributed evenly and numerically across the active channels in the group. When a modems performs initial ranging, it will be sent to the upsteam with the least number of active modems if the number of active modems on the current upsteam is greater than the average number of modems per upsteam in the group. All channels are treated equally when calculating loads. If a modem fails to range on the desired channel following a ranging overide, it will be allowed to remain on the channel on which it next performs initial ranging. If set to periodic, modems will be numerically distributed during initial ranging and then selectively moved after registration using UCC. Periodic load balancing will attempt to distribute the modems to maintain even bandwidth utilization across the channels in a group.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(1), initialNumeric(2), periodic(3)

dcxMACUpstreamGroupFrequencyIndex		1.3.6.1.4.1.4115.1.4.3.6.1.4.1.4
An index into upstream frequency table, identical to dcxMACUpstreamFrequencyIndex in that table. All entries with the same value of dcxMACUpstreamFrequencyIndex form a spectral frequency group all assigned to the same upstream group. Returns 0 if there are no triggers assigned to this group.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

dcxMACUpstreamGroupSpMgtTriggerIndex		1.3.6.1.4.1.4115.1.4.3.6.1.4.1.5
An index into spectral management trigger table, identical to dcxMACSpMgtTriggerIndex in that table. All entries with the same value of dcxMACSpMgtTriggerIndex form a trigger group all assigned to the same upstream group or channel. Returns 0 if there are no triggers assigned to this group.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

dcxMACUpstreamGroupStatus		1.3.6.1.4.1.4115.1.4.3.6.1.4.1.6
Used to create rows in this table
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

dcxMACUpstreamFrequencyTable		1.3.6.1.4.1.4115.1.4.3.6.1.5
Describes the upstream spectrum available for use by one or more upstream groups. Entries are grouped by dcxMACUpstreamFrequencyIndex, with each group assigned to one or more upstream groups.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DcxMACUpstreamFrequencyEntry

dcxMACUpstreamFrequencyEntry		1.3.6.1.4.1.4115.1.4.3.6.1.5.1
Describes a single contiguous region of upstream spectrum, available for use by one or more upstream spectral groups.
Status: current	Access: not-accessible
OBJECT-TYPE
	DcxMACUpstreamFrequencyEntry

dcxMACUpstreamFrequencyIndex		1.3.6.1.4.1.4115.1.4.3.6.1.5.1.1
An index into the upstream frequency table representing a group of spectral regions, all associated with the same upstream spectral group.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..255

dcxMACUpstreamFrequencyRegion		1.3.6.1.4.1.4115.1.4.3.6.1.5.1.2
An index into the upstream frequency table which, when grouped with other frequency regions with the same frequency index fully describe the upstream frequency spectrum available for use by a given spectral group.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..255

dcxMACUpstreamFrequencyStart		1.3.6.1.4.1.4115.1.4.3.6.1.5.1.3
The start frequency for this upstream spectral region.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACUpstreamFrequencyStop		1.3.6.1.4.1.4115.1.4.3.6.1.5.1.4
The stop frequency for this upstream spectral region.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACUpstreamFrequencyStatus		1.3.6.1.4.1.4115.1.4.3.6.1.5.1.5
Used to create entries in this table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

dcxMACSpectralMgtObjects		1.3.6.1.4.1.4115.1.4.3.6.1.6
OBJECT IDENTIFIER

dcxMACSpectralMgtTriggerTable		1.3.6.1.4.1.4115.1.4.3.6.1.6.1
Describes the spectral management triggers assigned to one or more upstream groups or channels. Entries are grouped by dcxMACSpMgtTriggerIndex, with each group assigned to one or more upstream channels or groups.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DcxMACSpectralMgtTriggerEntry

dcxMACSpectralMgtTriggerEntry		1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1
Describes a single spectral management trigger, available for use by one or more upstream channels or spectral groups.
Status: current	Access: not-accessible
OBJECT-TYPE
	DcxMACSpectralMgtTriggerEntry

dcxMACSpMgtTriggerIndex		1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.1
An index into the spectral managment trigger table representing a group of triggers, all assigned to the same upstream channel or spectral group.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..255

dcxMACSpMgtTriggerNumber		1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.2
An index into the spectral managment trigger table which, when grouped with other triggers with the same trigger index fully describe the spectral mangement triggers assigned to the same upstream channel or spectral group.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..255

dcxMACSpMgtTriggerType		1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.3
Identifies the trigger type represented by this entry.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtTriggerAction		1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.4
An index into the spectral management action table, identical to dcxMACSpMgtActionIndex in that table, identifying the action to take if this trigger is invoked. Returns 0 if there is no action associated with this trigger.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..255

dcxMACSpMgtTriggerParam1		1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.5
Parameter dependent on trigger type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtTriggerParam2		1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.6
Parameter dependent on trigger type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtTriggerParam3		1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.7
Parameter dependent on trigger type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtTriggerParam4		1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.8
Parameter dependent on trigger type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtTriggerParam5		1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.9
Parameter dependent on trigger type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtTriggerParam6		1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.10
Parameter dependent on trigger type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtTriggerParam7		1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.11
Parameter dependent on trigger type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtTriggerParam8		1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.12
Parameter dependent on trigger type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtTriggerStatus		1.3.6.1.4.1.4115.1.4.3.6.1.6.1.1.13
Used to create and control the status of entries in this table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

dcxMACSpectralMgtActionTable		1.3.6.1.4.1.4115.1.4.3.6.1.6.2
Describes the spectral management actions assigned to one or more spectral managment triggers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DcxMACSpectralMgtActionEntry

dcxMACSpectralMgtActionEntry		1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1
Describes a single spectral management action, assigned to one or more spectral management triggers.
Status: current	Access: not-accessible
OBJECT-TYPE
	DcxMACSpectralMgtActionEntry

dcxMACSpMgtActionIndex		1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.1
An index into the spectral managment actions table used to assign actions to spectral management triggers.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..255

dcxMACSpMgtActionType		1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.2
Identifies the action type represented by this entry.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtActionParam1		1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.3
Parameter dependent on action type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtActionParam2		1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.4
Parameter dependent on action type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtActionParam3		1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.5
Parameter dependent on action type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtActionParam4		1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.6
Parameter dependent on action type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtActionParam5		1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.7
Parameter dependent on action type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtActionParam6		1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.8
Parameter dependent on action type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtActionParam7		1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.9
Parameter dependent on action type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtActionParam8		1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.10
Parameter dependent on action type.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

dcxMACSpMgtActionStatus		1.3.6.1.4.1.4115.1.4.3.6.1.6.2.1.11
Used to create and control the status of entries in this table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

dcxMACSharedSecretTable		1.3.6.1.4.1.4115.1.4.3.6.1.7
Set up shared secrets for this DOCSIS MAC Interface
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		DcxMACSharedSecretEntry

dcxMACSharedSecretEntry		1.3.6.1.4.1.4115.1.4.3.6.1.7.1
dcxMACSharedSecretEntry
Status: current	Access: not-accessible
OBJECT-TYPE
	DcxMACSharedSecretEntry

dcxMACSharedSecretId		1.3.6.1.4.1.4115.1.4.3.6.1.7.1.1
ID for the associated shared secret.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..16

dcxMACSharedSecretStr		1.3.6.1.4.1.4115.1.4.3.6.1.7.1.2
This is the shared secret itself, which is considered write-only. It can be SET but when a GET operation is performed the value is not returned.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

dcxMACSharedSecretStatus		1.3.6.1.4.1.4115.1.4.3.6.1.7.1.3
Row status.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus