ARRIS-CER-VIDEO-MIB

File: ARRIS-CER-VIDEO-MIB.mib (142543 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
CADANT-TC INET-ADDRESS-MIB IF-MIB
CADANT-CMTS-EQUIPMENT-MIB ARRIS-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Counter64 Counter32 Gauge32
IpAddress Integer32 NOTIFICATION-TYPE
TEXTUAL-CONVENTION TruthValue RowStatus
DisplayString TimeStamp DateAndTime
OBJECT-GROUP MODULE-COMPLIANCE InetAddressIPv4or6
AdminState InetAddressType InetAddress
ifIndex InterfaceIndex InterfaceIndexOrZero
trapCounter trapSeverity arrisE6Cer

Defined Types

CerTransportStreamIndex  
An identifier that uniquely identifies an MPEG Transport Stream in the E6000 MPEG Manager. This could represent an incoming or outgoing TS, or could represent an SPTS or MPTS.
TEXTUAL-CONVENTION    
  Unsigned32 1..1073741823  

CerElementaryStreamType  
A convenient type definition for MPEG Elementary Stream Type values.
TEXTUAL-CONVENTION    
  Integer32 1..255  

CerDescriptorTag  
A convenient type definition for MPEG Descriptor Tags values.
TEXTUAL-CONVENTION    
  Integer32 1..255  

CerDescriptorIndex  
An identifier that uniquely identifies an MPEG Descriptor within a given Program or Elementary Stream.
TEXTUAL-CONVENTION    
  Integer32 1..65535  

CerDescriptorBuffer  
A buffer that contains MPEG Descriptor data.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0..255)  

CerPID  
A convenient type definition for MPEG PID values.
TEXTUAL-CONVENTION    
  Integer32 0..8191  

CerProgram  
A convenient type definition for MPEG Program Number values.
TEXTUAL-CONVENTION    
  Unsigned32  

CerPidType  
A convenient type definition for PID - whether PSI or ES. PSI - the typical program defined by PAT & PMT tables ES - a stream that contains only PIDs with not references to PAT/PMT tables (si-stream) ghost - neither of the above, an unreferenced PID.
TEXTUAL-CONVENTION    
  INTEGER es(1), psi(2), ghost(3)  

CerTransportStreamStatus  
A convenient type definition for MPEG transport stream status states. These can be as follows active - currently passing video traffic blocked - no video passing currently, the stream is blocked inactive - not passing ANY traffic - used for statically configured streams
TEXTUAL-CONVENTION    
  INTEGER active(1), timingOut(2), inactive(3)  

CerProgStatus  
A convenient type definition for MPEG Program status states. These can be as follows active - currently passing video traffic timedOut - No video passing currently, in transition from active to inactive states inactive - not passing ANY traffic - used for statically configured programs
TEXTUAL-CONVENTION    
  INTEGER active(1), timingOut(2), inactive(3)  

CerTransportStreamDirection  
A convenient type definition for the direction of a Transport Stream incoming - the Transport Stream is being received by the E6000, typically over IP outgoing - the Transport Stream is being generated by the E6000 and sent to a QAM.
TEXTUAL-CONVENTION    
  INTEGER incoming(1), outgoing(2)  

CerVirtualEdgeIndexType  
A convenient type definition for the index associated with a Virtual Edge instance.
TEXTUAL-CONVENTION    
  Integer32 0..8  

CerServiceGroupNameIndexType  
A convenient type definition for the index associated with a video Service Group instance.
TEXTUAL-CONVENTION    
  Integer32 1..65535  

CerIeqQamType  
The Type of IEQ QAM channel: vod - Video On Demand sdv - Switched Digital Video linear - Broadcast video vodsdv - VOD or SDV
TEXTUAL-CONVENTION    
  INTEGER vod(1), sdv(2), linear(3), vodsdv(4)  

CerUdpPortMapType  
Defines the type of dataplane UDP port mapping used by a Virtual Edge as one of the following map8x8 - Static map: Upper 8 bits of UDP port determines the channel; lower 8 bits, the program number. map10x6 - Static map: Upper 10 bits of UDP port determines the channel; lower 6 bits, the program number. session - Mapping determined via ERM non-multicast session-based messages.
TEXTUAL-CONVENTION    
  INTEGER map8x8(1), map10x6(2), session(3)  

CerStreamType  
Defines the type of stream in the UdpIpStream table static - Either a static UDP port map or manual map of a single port (future). dynamic - Set up via a message from a Session ERM. redundant - Redundant dynamic input stream set up via a message from a Session ERM (future).
TEXTUAL-CONVENTION    
  INTEGER static(1), dynamic(2), redundant(3)  

CerPerChanEnable  
A convenient type definition for per-channel feature configuration. These can be as follows enabled - the feature is enabled for this channel disabled - the feature is disabled for this channel global - the feature has no per-channel value, but uses the current global setting.
TEXTUAL-CONVENTION    
  INTEGER enabled(1), disabled(2), global(3)  

CerMulticastType  
A convenient type definition for the multicast type for SDV/broadcast.
TEXTUAL-CONVENTION    
  INTEGER pim(1), igmp(2), none(3)  

CerErmProtocolType  
A convenient type definition for which type of protocol to use for communication with an ERM. ngod - Comcast Next Generation on Demand 2.0 protocol rpc - TWC Remote Procedure Call protocol rmi - CableLabs Remote Management Interface protocol none - No ERM will be used (e.g., manually configured table-based VOD only)
TEXTUAL-CONVENTION    
  INTEGER ngod(1), rpc(2), rmi(3), none(4)  

CerVideoQamStreamEntry  
SEQUENCE    
  cervQamTransportStreamID Unsigned32
  cervQamTsMibIndex CerTransportStreamIndex
  cervQamPatInterval Unsigned32
  cervQamPmtInterval Unsigned32
  cervQamOverSubscriptionRecoveryEnabled CerPerChanEnable
  cervQamPreEncDetect CerPerChanEnable
  cervQamOnProgConflictDropOld CerPerChanEnable
  cervQamServiceGroupName OCTET STRING
  cervQamServiceGroupIndex Unsigned32
  cervQamVeqIndex CerVirtualEdgeIndexType
  cervQamUdpBasePort Unsigned32
  cervQamJitterDepth Integer32
  cervQamUdpPortOffset Unsigned32
  cervQamClearCounters TruthValue
  cervQamSubtype CerIeqQamType

CerVideoQamStreamStateEntry  
SEQUENCE    
  cervQamTotalPatsTx Counter32
  cervQamTotalProgramsTx Counter32
  cervQamCurrentProgramsTx Gauge32
  cervQamPeakProgramsTx Gauge32
  cervQamStreamStatus CerTransportStreamStatus
  cervQamTimeActivated TimeStamp
  cervQamTimeActive Unsigned32
  cervQamTimeDeactivated TimeStamp
  cervQamOverSubscribed TruthValue
  cervQamCurrentBandwidth Gauge32
  cervQamPeakBandwidth Gauge32

CerVideoReplicaChanEntry  
SEQUENCE    
  cervReplicaSourceIfIndex InterfaceIndex
  cervReplicatedIfIndex InterfaceIndex
  cervReplicaRowStatus RowStatus

CerveServiceGroupEntry  
SEQUENCE    
  cerveServiceGroupSlot Unsigned32
  cerveServiceGroupConnector Unsigned32
  cerveServiceGroupName OCTET STRING
  cerveServiceGroupIndex Unsigned32

CerVideoUdpIpStreamEntry  
SEQUENCE    
  cervUdpIpDestIpAddr InetAddressIPv4or6
  cervUdpIpDestUdpPort Unsigned32
  cervUdpIpSrcIpAddr InetAddressIPv4or6
  cervUdpIpStreamStatus CerTransportStreamStatus
  cervUdpIpTsMibIndex CerTransportStreamIndex
  cervUdpIpActiveQamIfIndex InterfaceIndexOrZero
  cervUdpIpTimeActivated TimeStamp
  cervUdpIpTimeActive Unsigned32
  cervUdpIpTimeDeactivated TimeStamp
  cervUdpIpPacketCount Counter64
  cervUdpIpBadSyncCount Counter32
  cervUdpIpChanContainer Unsigned32
  cervUdpIpPidPassthruEnable TruthValue
  cervUdpIpAddrType InetAddressType
  cervUdpIpStreamType CerStreamType

CerVideoStreamEntry  
SEQUENCE    
  cervStreamDirectionIndex CerTransportStreamDirection
  cervStreamTsMibIndex CerTransportStreamIndex
  cervStreamPatVersion Unsigned32
  cervStreamTsID Unsigned32
  cervStreamProgramCount Gauge32
  cervStreamPatCurrTimeCreated TimeStamp
  cervStreamPatCurrTimeActive Unsigned32
  cervStreamPatPrevTimeCreated TimeStamp
  cervStreamProgramFilteredCount Gauge32
  cervStreamPidCount Gauge32
  cervStreamTspCount Counter64
  cervStreamDroppedTspCount Counter32

CerVideoStreamProgramEntry  
SEQUENCE    
  cervStreamProgTsMibIndex CerTransportStreamIndex
  cervStreamProgIndex CerProgram
  cervStreamProgPmtVersion Unsigned32
  cervStreamProgPmtPid CerPID
  cervStreamProgEcmPid CerPID
  cervStreamProgPcrPid CerPID
  cervStreamProgEsCount Gauge32
  cervStreamProgDescCount Gauge32
  cervStreamPmtCurrTimeCreated TimeStamp
  cervStreamPmtCurrTimeActive Unsigned32
  cervStreamPmtPrevTimeCreated TimeStamp
  cervStreamProgBitrate Unsigned32
  cervStreamProgPidFilteredCnt Gauge32
  cervStreamProgContinuityErrCnt Counter32

CerVideoStreamEsEntry  
SEQUENCE    
  cervStreamEsTsMibIndex CerTransportStreamIndex
  cervStreamEsProgIndex CerProgram
  cervStreamEsPidIndex CerPID
  cervStreamEsType CerElementaryStreamType
  cervStreamEsDescCount Gauge32
  cervStreamEsContinuityErrCnt Counter32
  cervStreamEsTspCount Counter32

CerVideoStreamDataEsEntry  
SEQUENCE    
  cervStreamDataEsTsMibIndex CerTransportStreamIndex
  cervStreamDataEsPidIndex CerPID
  cervStreamDataEsIsGhostPid TruthValue
  cervStreamDataEsForwarding TruthValue
  cervStreamDataEsContinuityErrCnt Counter32

CerVideoStreamDescEntry  
SEQUENCE    
  cervStreamDescTsMibIndex CerTransportStreamIndex
  cervStreamDescPidIndex CerPID
  cervStreamDescIndex CerDescriptorIndex
  cervStreamDescTag CerDescriptorTag
  cervStreamDescLen Integer32
  cervStreamDescData CerDescriptorBuffer

CerVideoQamJitterStatusEntry  
SEQUENCE    
  cervQamJitterStatusIfIndex InterfaceIndex
  cervQamJitterStatusProgNumber CerProgram
  cervQamJitterStatusCurrStatus INTEGER
  cervQamJitterStatusUnderflowCnt Counter32
  cervQamJitterStatusOverflowCnt Counter32
  cervQamJitterStatusBufLength Gauge32
  cervQamJitterStatusPcrJitter Gauge32
  cervQamJitterStatusPcrCnt Counter32
  cervQamJitterStatusPcrDiscontinuityCnt Counter32
  cervQamJitterStatusBufDepth Unsigned32

CerVideoProgRemapEntry  
SEQUENCE    
  cervProgRemapTsMibIndex CerTransportStreamIndex
  cervProgRemapInProgIndex CerProgram
  cervProgRemapActiveQamIfIndex InterfaceIndex
  cervProgRemapOutProg CerProgram
  cervProgRemapTimeActivated TimeStamp
  cervProgRemapTimeActive Unsigned32

CerVideoPidRemapEntry  
SEQUENCE    
  cervPidRemapTsMibIndex CerTransportStreamIndex
  cervPidRemapInPidIndex CerPID
  cervPidRemapActiveQamIfIndex InterfaceIndex
  cervPidRemapOutPid CerPID
  cervPidRemapActivePidType CerPidType
  cervPidRemapTimeActivated TimeStamp
  cervPidRemapTimeActive Unsigned32

CerVideoLookupTsMibIndexToIfIndexEntry  
SEQUENCE    
  cervLookupTsIndexIfIndex InterfaceIndex

CerVideoLookupQamTsMibIndexToInTsMibIndexEntry  
SEQUENCE    
  cervLookupInTsMibIndex CerTransportStreamIndex

CerVideoLookupTsMibIndexToUdpIpEntry  
SEQUENCE    
  cervLookupTsMibIndexUdpPort Unsigned32
  cervLookupTsMibIndexIpAddrDest InetAddressIPv4or6
  cervLookupTsMibIndexIpAddrSrc InetAddressIPv4or6
  cervLookupTsMibIndexAddrType InetAddressType
  cervLookupTsMibIndexVe CerVirtualEdgeIndexType

CerVirtualEdgeEntry  
SEQUENCE    
  cerveIndex CerVirtualEdgeIndexType
  cerveName DisplayString
  cervePortMap CerUdpPortMapType
  cerveSzIndex Unsigned32
  cerveGlobal TruthValue
  cerveAdminState AdminState
  cerveRowStatus RowStatus

CerveStatusEntry  
SEQUENCE    
  cerveStatusDroppedPkts Counter32
  cerveStatusBlockedPkts Counter32
  cerveStatusFragmentedPkts Counter32
  cerveStatusOperStatus INTEGER

CerveErmSrvDiscEntry  
SEQUENCE    
  cerveErmSrvDiscErmIndex Integer32
  cerveErmSrvDiscComponentName DisplayString
  cerveErmSrvDiscAdminState AdminState
  cerveErmSrvDiscControlIpAddr InetAddressIPv4or6
  cerveErmSrvDiscAddrType InetAddressType
  cerveErmSrvDiscControlIfIndex InterfaceIndexOrZero
  cerveErmSrvDiscRowStatus RowStatus

CerveErmD6StatEntry  
SEQUENCE    
  cerveErmD6StatTcpConnSuccess Counter32
  cerveErmD6StatTcpConnFail Counter32
  cerveErmD6StatVrepEstablishTime TimeStamp
  cerveErmD6StatVrepOpenSent Counter32
  cerveErmD6StatVrepOpenRcvd Counter32
  cerveErmD6StatUpdsSent Counter32
  cerveErmD6StatUpdsRcvd Counter32
  cerveErmD6StatVrepKeepAliveSent Counter32
  cerveErmD6StatVrepKeepAliveRcvd Counter32
  cerveErmD6StatRemoteSzName DisplayString
  cerveErmD6StatRemoteCompName DisplayString
  cerveErmD6StatRemoteVrepId Unsigned32
  cerveErmD6StatRemoteVrepVersion Unsigned32
  cerveErmD6StatRemoteVrepRoutes Gauge32
  cerveErmD6StatRemoteHoldTime Unsigned32
  cerveErmD6StatVrepStatus INTEGER

CerveDataAddrMapEntry  
SEQUENCE    
  cerveDataAddrMapIpAddr InetAddressIPv4or6
  cerveDataAddrMapAddrType InetAddressType
  cerveDataAddrMapIfIndex InterfaceIndexOrZero
  cerveDataAddrMapEdgeInputGrp DisplayString
  cerveDataAddrMapErmInputPort Unsigned32
  cerveDataAddrMapRowStatus RowStatus

CerveInputPortEntry  
SEQUENCE    
  cerveInputPortErmInputPort Unsigned32
  cerveInputPortIpAddr InetAddressIPv4or6
  cerveInputPortAddrType InetAddressType

CerveUdpPortMapEntry  
SEQUENCE    
  cerveUdpPortMapUdpBasePort Unsigned32
  cerveUdpPortMapQamIfIndex InterfaceIndex

CerveBandwidthEntry  
SEQUENCE    
  cerveBandIpAddr InetAddressIPv4or6
  cerveBandIfIndex InterfaceIndex
  cerveBandAllocation Unsigned32
  cerveBandAddrType InetAddressType
  cerveBandRowStatus RowStatus

CerveUdpBlockedPortEntry  
SEQUENCE    
  cerveUdpBlockedPortIpAddr InetAddressIPv4or6
  cerveUdpBlockedPortLowPort Unsigned32
  cerveUdpBlockedPortHighPort Unsigned32
  cerveUdpBlockedPortAddrType InetAddressType
  cerveUdpBlockedPortRowStatus RowStatus

CerErmSrvDiscEntry  
SEQUENCE    
  cerErmSrvDiscIndex Integer32
  cerErmSrvDiscName DisplayString
  cerErmSrvDiscDescription DisplayString
  cerErmSrvDiscAddrType InetAddressType
  cerErmSrvDiscRemoteIpAddr InetAddress
  cerErmSrvDiscRemoteFqdnIpAddr InetAddressIPv4or6
  cerErmSrvDiscPort Unsigned32
  cerErmSrvDiscHoldTime Unsigned32
  cerErmSrvDiscKeepAliveTime Unsigned32
  cerErmSrvDiscBwInterval Unsigned32
  cerErmSrvDiscBwThreshold Unsigned32
  cerErmSrvDiscCost Unsigned32
  cerErmSrvDiscConnRetryTimeout Unsigned32
  cerErmSrvDiscRowStatus RowStatus

CerStreamingZoneEntry  
SEQUENCE    
  cervSzIndex Unsigned32
  cervSzQamNetworkId Unsigned32
  cervSzName OCTET STRING
  cervSzVpmeSdIndex Unsigned32
  cervSzRowStatus RowStatus

CerVideoCountsEntry  
SEQUENCE    
  cerVideoCountsCardId Integer32
  cerVideoCountsBadSyncPkts Counter32
  cerVideoCountsDroppedPkts Counter32
  cerVideoCountsFragments Counter32

Defined Values

cerMpegVideoMIB 1.3.6.1.4.1.4115.1.9.1.1
This MIB manages the MPEG / VIDEO software on the Arris CER.
MODULE-IDENTITY    

cerVideoObjects 1.3.6.1.4.1.4115.1.9.1.1.1
OBJECT IDENTIFIER    

cerVideoControlGroup 1.3.6.1.4.1.4115.1.9.1.1.1.1
OBJECT IDENTIFIER    

cervControlPatInterval 1.3.6.1.4.1.4115.1.9.1.1.1.1.1
Retransmission interval for PAT tables in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 50..2000  

cervControlPmtInterval 1.3.6.1.4.1.4115.1.9.1.1.1.1.2
Retransmission interval for PMT tables in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 50..2000  

cervControlUnicastTimeoutInterval 1.3.6.1.4.1.4115.1.9.1.1.1.1.3
The unicast (VOD) TS timeout interval in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..65  

cervControlMaxProgramsPerQamChannel 1.3.6.1.4.1.4115.1.9.1.1.1.1.4
Max number of programs per channel. Without this parameter, with 8:8 port mapping, the maximum port value allowed would be 255. Since we can fit at least 10 SD programs on a video channel, should not allow setting below 10. The legal program number range for OTS program numbers is 1 to cervControlMaxProgramsPerQamChannel.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..31  

cervControlOverSubscriptionRecovery 1.3.6.1.4.1.4115.1.9.1.1.1.1.5
If this is set to TRUE, then the E6000 will attempt to recover automatically from a QAM-overscribed condition by shutting down active programs selectively. It selects which programs to shut down by order of most recently activated, checks the new bitrates, then continues to shutdown more programs as neccessary untill the total bandwidth fits within the QAM available bandwidth.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cervControlDuplicateTsidCheck 1.3.6.1.4.1.4115.1.9.1.1.1.1.6
If this is set to never, then the E6000 disablse detection of duplicate TSIDs, allowing any pair of channels to use the same value. If it is set to streamingZone, the E6000 will check that TSIDs are unique within streaming zones. If set to serviceGroup, it will check that TSIDs are unique within service groups.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER streamingZone(1), serviceGroup(2), never(3)  

cervControlPreEncDetect 1.3.6.1.4.1.4115.1.9.1.1.1.1.7
If this is set to TRUE, then the E6000 will detect pre-encrypted streams, and will avoid re-encrypting the traffic when forwarding it downstream.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cervControlOnProgConflictDropOld 1.3.6.1.4.1.4115.1.9.1.1.1.1.8
If this is set to FALSE, if a new stream from a different source IP address maps to the same output QAM channel and program number as an existing stream, the E6000 will drop the newer stream and forward the older stream. If it is TRUE then the older stream will be blocked, and the newer one will be forwarded.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cervControlDefaultJitter 1.3.6.1.4.1.4115.1.9.1.1.1.1.9
The default jitter buffer depth for a channel in milliseconds. Zero means do not compensate for jitter (i.e., send immediately).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..500  

cervControlUdpPortOffset 1.3.6.1.4.1.4115.1.9.1.1.1.1.10
The low UDP port number in the block of 256 UDP ports assigned to a channel. cervControlUdpPortOffset plus cervControlMaxProgramsPerQamChannel must be less than 257.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

cervErmProtocol 1.3.6.1.4.1.4115.1.9.1.1.1.1.11
The type of ERM protocol for ERM communications. Must be configured before configuring ERM parameters.
Status: current Access: read-write
OBJECT-TYPE    
  CerErmProtocolType  

cervStaticVodPidRemapScheme 1.3.6.1.4.1.4115.1.9.1.1.1.1.12
The type of PID remapping scheme to use to static (table-based) VOD. Session-based VOD is only allowed to use dynamic remapping.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER atsc(1), dynamic(2)  

cerVideoQamStreamTable 1.3.6.1.4.1.4115.1.9.1.1.1.2
This table stores MPEG Video related data on a per QAM channel basis. Rows in this table are auto-created when a row of type dchannelVideo is created in the portTable. It is autodeleted when the row in the portTable is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoQamStreamEntry

cerVideoQamStreamEntry 1.3.6.1.4.1.4115.1.9.1.1.1.2.1
Video QAM channel configuration parameters
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoQamStreamEntry  

cervQamTransportStreamID 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.1
The MPEG transport_stream_id used when transmitting PAT tables on this QAM channel. All QAM streams in the same streaming zone must have a unique TSID value, unless cervControlAllowTsidDuplication is set to true. A unique value is auto-populated when the row is created, although the value may be explicitly written to a different, unique value (with the SZ) at a later time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

cervQamTsMibIndex 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.2
The index of the outgoing Transport Stream on this QAM channel.
Status: current Access: read-only
OBJECT-TYPE    
  CerTransportStreamIndex  

cervQamPatInterval 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.3
Retransmission interval for PAT tables in milliseconds. A value of zero means use the global value.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 50..2000  

cervQamPmtInterval 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.4
Retransmission interval for PMT tables in milliseconds. A value of zero means use the global value.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 50..2000  

cervQamOverSubscriptionRecoveryEnabled 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.5
If this is set to enabled, then the E6000 will attempt to recover automatically from a QAM-overscribed condition by shutting down active programs selectively. It selects which programs to shut down by order of most recently activated, checks the new bitrates, then continues to shutdown more programs as neccessary untill the total bandwidth fits within the QAM available bandwidth. If set to disabled, packets are discarded randomly. If set to global, then the current value of cervControlOverSubscriptionRecovery is used.
Status: current Access: read-write
OBJECT-TYPE    
  CerPerChanEnable  

cervQamPreEncDetect 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.6
If this is set to enabled, then the E6000 will detect Motorola pre-encrypted streams, and will avoid re-encrypting the traffic when forwarding it downstream. If set to global, then the current value of cervControlPreEncDetect is used.
Status: current Access: read-write
OBJECT-TYPE    
  CerPerChanEnable  

cervQamOnProgConflictDropOld 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.7
If this is set to enabled, if a new stream from a different source IP address maps to the same output QAM channel and program number as an existing stream, the newer stream will be forwarded, and the older stream will be blocked. If set to disabled, then the newer stream will be blocked, and the older, existing one will be forwarded. If set to global, then the current value of cervControlOnProgConflictDropOld is used.
Status: current Access: read-write
OBJECT-TYPE    
  CerPerChanEnable  

cervQamServiceGroupName 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.8
The name of the Service Group that this QAM channel is assigned to. A null string means the channel is not assigned to any Service Group.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

cervQamServiceGroupIndex 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.9
The index for the Service Group, required for session-based ERMs. Zero means the channel is not assigned to a service group.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

cervQamVeqIndex 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.10
The index of the Virtual Edge that this QAM channel is assigned to. This value must be provided when the row is created and cannot be updated.
Status: current Access: read-write
OBJECT-TYPE    
  CerVirtualEdgeIndexType  

cervQamUdpBasePort 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.11
This attribute is only used when cervePortMap is set to 8x8 or 10x6. The start of the UDP port range is assigned to this QAM channel for the purposes of routing video traffic to it. There will be 256 ports assigned when using 8x8, or 64 when using 10x6 port mapping scheme. The lowest port number in each block is not used in the port map. Only the 8x8 mapping scheme is currently supported. Setting this value auto-populates a corresponding row in cerveUdpPortMapTable and, when the value is changed in an existing row, deletes the row in cerveUdpPortMapTable for the old value. The UDP block starting with zero is not usable; zero means no block is assigned.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

cervQamJitterDepth 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.12
The setting for jitter-buffer depth in milliseconds for video program streams on this channel. Can be set to a small value to reduce latency through the box, or set to a higher value to compensate for more jitter in the input video stream. Uses the global value cervControlDefaultJitter when the value is -1
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1..500  

cervQamUdpPortOffset 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.13
The offset in the 256 UDP port block for the lowest numbered UDP port mapped to this channel. cervQamUdpPortOffset plus cervControlMaxProgramsPerQamChannel must be less than 257. Zero means uses the current global value cervControlUdpPortOffset.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..246  

cervQamClearCounters 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.14
Always reads as false. Setting it to true clears all IEQ video counters related to this DS channel. Setting it to false has no effect.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cervQamSubtype 1.3.6.1.4.1.4115.1.9.1.1.1.2.1.15
The type(s) of Ieq traffic to be carried over this QAM channel. Used for reporting config to ERM session managers. Linear is not yet supported. Channels cannot be used for video if the subtype is none.
Status: current Access: read-write
OBJECT-TYPE    
  CerIeqQamType  

cerVideoQamStreamStateTable 1.3.6.1.4.1.4115.1.9.1.1.1.3
This table provides MPEG Video status on a per QAM channel basis. Rows in this table are auto-created when a row of type dchannelVod, dchannelSdv, or dchannelBroadcast is created in the portTable. It is autodeleted when the row in the portTable is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoQamStreamStateEntry

cerVideoQamStreamStateEntry 1.3.6.1.4.1.4115.1.9.1.1.1.3.1
Video QAM channel status
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoQamStreamStateEntry  

cervQamTotalPatsTx 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.1
The total number of unique PAT Tables that have been generated for this QAM channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cervQamTotalProgramsTx 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.2
The accumulated number of Programs transmitted on this QAM channel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cervQamCurrentProgramsTx 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.3
The number of Programs currently being transmitted on this QAM channel.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cervQamPeakProgramsTx 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.4
The peak number of Programs transmitted since the channel was activated.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cervQamStreamStatus 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.5
Current status of this QAM Transport stream
Status: current Access: read-only
OBJECT-TYPE    
  CerTransportStreamStatus  

cervQamTimeActivated 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.6
The value of sysUpTime when this stream was last activated. Zero if not-applicable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

cervQamTimeActive 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.7
The total time that MPEG stream has been active.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cervQamTimeDeactivated 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.8
The value of sysUpTime when this stream was last deactivated. Zero if not-known.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

cervQamOverSubscribed 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.9
Indicates if the bandwidth of this QAM is currently over-subscribed (receiving more packets than can be transmitted). If the QAM is currently over-subscribed, some programs will suffer packet-loss. The affected programs are identified in the cerQamProgramPcrBufferTable.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cervQamCurrentBandwidth 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.10
For table-based VOD,the current bandwidth in use. For Session-based VOD and SDV, the total requested bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cervQamPeakBandwidth 1.3.6.1.4.1.4115.1.9.1.1.1.3.1.11
For table-based VOD,the peak bandwidth in use since the channel was activated. For session-based VOD and SDV, the peak requested bandwidth since the channel was activated.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cerVideoReplicaChanTable 1.3.6.1.4.1.4115.1.9.1.1.1.4
This Table contains one row for each replicated channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoReplicaChanEntry

cerVideoReplicaChanEntry 1.3.6.1.4.1.4115.1.9.1.1.1.4.1
Video replicated channel configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoReplicaChanEntry  

cervReplicaSourceIfIndex 1.3.6.1.4.1.4115.1.9.1.1.1.4.1.1
The ifIndex of the source (base) video channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

cervReplicatedIfIndex 1.3.6.1.4.1.4115.1.9.1.1.1.4.1.2
The ifIndex of the replicated channel associated with this source video channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

cervReplicaRowStatus 1.3.6.1.4.1.4115.1.9.1.1.1.4.1.3
The RowStatus for controlling entries in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cerveServiceGroupTable 1.3.6.1.4.1.4115.1.9.1.1.1.5
This table contains a mapping, per VE, of RF connectors to SG names.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerveServiceGroupEntry

cerveServiceGroupEntry 1.3.6.1.4.1.4115.1.9.1.1.1.5.1
Video service group configuration. A row in this table is created when the first channel on an RF connector is assigned to a SG. All channels on the same RF port (i.e., same slot and connector) and in the same VE must have the same SG name.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerveServiceGroupEntry  

cerveServiceGroupSlot 1.3.6.1.4.1.4115.1.9.1.1.1.5.1.2
The card slot plus one of the channel in this service group.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..6 | 9..14  

cerveServiceGroupConnector 1.3.6.1.4.1.4115.1.9.1.1.1.5.1.3
The DS connector number plus one of the channel in this service group. Only 1..8 is legal for first generation DCAM.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..16  

cerveServiceGroupName 1.3.6.1.4.1.4115.1.9.1.1.1.5.1.4
The name of the video Service Group.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

cerveServiceGroupIndex 1.3.6.1.4.1.4115.1.9.1.1.1.5.1.5
The index number for the SG, required for session-based ERMs. Set by assigning a SG index to a channel on this RF connector.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cerVideoUdpIpStreamTable 1.3.6.1.4.1.4115.1.9.1.1.1.7
This table displays the current incoming Transport Streams that are to be forwarded to an active QAM channel. Only streams being forwarded are in this table. Entries contain a reference to either a specific QAM channel or to a channel-container. While not needed for uniqueness, the VE index is a key to allow us to easily find all streams in a VE.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoUdpIpStreamEntry

cerVideoUdpIpStreamEntry 1.3.6.1.4.1.4115.1.9.1.1.1.7.1
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoUdpIpStreamEntry  

cervUdpIpDestIpAddr 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.2
The DEST IP address of the incoming TS being mapped to the specified QAM Channel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressIPv4or6  

cervUdpIpDestUdpPort 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.3
The destination UDP Port of the incoming TS being mapped to the specified QAM Channel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cervUdpIpSrcIpAddr 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.4
The SRC IP address of the incoming TS being mapped to the specified QAM Channel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressIPv4or6  

cervUdpIpStreamStatus 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.5
The status of this stream.
Status: current Access: read-only
OBJECT-TYPE    
  CerTransportStreamStatus  

cervUdpIpTsMibIndex 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.6
The index of the entry in the cerVideoStreamTable corresponding to this table entry.
Status: current Access: read-only
OBJECT-TYPE    
  CerTransportStreamIndex  

cervUdpIpActiveQamIfIndex 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.7
The ifIndex of the table-based QAM channel that this stream is currently mapped to. This is zero if the input stream is session-based and therefore is mapped to a channel container. Only one of cervUdpIpActiveQamIfIndex and cervUdpIpChanContainer are set for any single input stream.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

cervUdpIpTimeActivated 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.8
The value of sysUpTime when this stream was last activated. Zero if not-applicable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

cervUdpIpTimeActive 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.9
The total time that the stream has been active.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cervUdpIpTimeDeactivated 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.10
The value of sysUpTime when this stream was last deactivated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

cervUdpIpPacketCount 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.11
The number of UDP packets received for this stream.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cervUdpIpBadSyncCount 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.12
The number of ingress MPEG frames (TSPs)without the MPEG Sync byte. Since there can be multiple MPEG frames per UDP packet, this count could be higher than cervUdpIpPacketCount.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cervUdpIpChanContainer 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.13
The channel container for this session-based input stream. This is zero if the input stream is mapped using table-based VOD. Only one of cervUdpIpActiveQamIfIndex and cervUdpIpChanContainer is set for any single input stream.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

cervUdpIpPidPassthruEnable 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.14
Whether or not to remap the PIDs in this stream. True means no remap.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cervUdpIpAddrType 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.15
Type of IP address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

cervUdpIpStreamType 1.3.6.1.4.1.4115.1.9.1.1.1.7.1.16
If dynamic, then a message to the session ERM is needed if the stream fails.
Status: current Access: read-only
OBJECT-TYPE    
  CerStreamType  

cerVideoStreamTable 1.3.6.1.4.1.4115.1.9.1.1.1.8
This table stores basic information on all Transport Streams in the E6000. It covers both incoming and outgoing ones. The MPEG Manager automatically creates any entry in this table when it detects a new incoming TS or begins to generate a new outgoing TS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoStreamEntry

cerVideoStreamEntry 1.3.6.1.4.1.4115.1.9.1.1.1.8.1
Video stream status table
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoStreamEntry  

cervStreamDirectionIndex 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.1
The direction of this Transport Stream.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerTransportStreamDirection  

cervStreamTsMibIndex 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.2
The unique index that identifies the Transport Stream within the E6000.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerTransportStreamIndex  

cervStreamPatVersion 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.3
The version number of the current PAT Table for this Transport Stream.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cervStreamTsID 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.4
The MPEG transport_stream_id in the PAT tables on this Transport Stream.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cervStreamProgramCount 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.5
The number of Programs currently in this Transport Stream.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cervStreamPatCurrTimeCreated 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.6
The value of sysUpTime when the current PAT was created. Zero if not-applicable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

cervStreamPatCurrTimeActive 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.7
The total time the current PAT has been active.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cervStreamPatPrevTimeCreated 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.8
The value of sysUpTime when the predecessor of this PAT was created. Zero if not-known.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

cervStreamProgramFilteredCount 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.9
The number of Programs currently being filtered from this Transport Stream.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cervStreamPidCount 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.10
The total number of PIDs used by this Transport Stream. It is the sum of all Program cervStreamProgEsCount + PMT PIDs + ECM PIDs (if present) + PCR PIDs (if different) + ghost PIDs (if present).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cervStreamTspCount 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.11
The total number of MPEG Transport Stream Packets sent/received on this stream.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cervStreamDroppedTspCount 1.3.6.1.4.1.4115.1.9.1.1.1.8.1.12
The total number of MPEG Transport Stream Packets dropped on this stream.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerVideoStreamProgramTable 1.3.6.1.4.1.4115.1.9.1.1.1.9
This table stores basic information for each Program in each Transport Stream known to the E6000. Each entry in cerVideoStreamTable will have at least one entry in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoStreamProgramEntry

cerVideoStreamProgramEntry 1.3.6.1.4.1.4115.1.9.1.1.1.9.1
Video program status table
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoStreamProgramEntry  

cervStreamProgTsMibIndex 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.1
The unique index that identifies the Transport Stream containing this Program.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerTransportStreamIndex  

cervStreamProgIndex 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.2
The Program Number for this program within the associated Transport Stream.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CerProgram  

cervStreamProgPmtVersion 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.3
The version number of the current PMT Table for this Program.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cervStreamProgPmtPid 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.4
The MPEG PID used for the PMT Table for this Program.
Status: current Access: read-only
OBJECT-TYPE    
  CerPID  

cervStreamProgEcmPid 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.5
The MPEG PID used to for the ECM Table for this Program. This is set to 0 in the program is unencrypted.
Status: current Access: read-only
OBJECT-TYPE    
  CerPID  

cervStreamProgPcrPid 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.6
The MPEG PID used to for the PCR for this Program.
Status: current Access: read-only
OBJECT-TYPE    
  CerPID  

cervStreamProgEsCount 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.7
The number of Elementary Streams currently in this Program.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cervStreamProgDescCount 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.8
The number of Descriptors in the PMT 'first_loop' for this Program.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cervStreamPmtCurrTimeCreated 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.9
The value of sysUpTime when the current PMT was created. Zero if not-applicable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

cervStreamPmtCurrTimeActive 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.10
The total time the current PMT has been active.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cervStreamPmtPrevTimeCreated 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.11
The value of sysUpTime when the predecessor of this PMT was created. Zero if not-known.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

cervStreamProgBitrate 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.12
The bitate in Kbps, of this Program. This may have a value of 0 if the bitrate is not known.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cervStreamProgPidFilteredCnt 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.13
The number of PIDs currently being filtered from this Program.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cervStreamProgContinuityErrCnt 1.3.6.1.4.1.4115.1.9.1.1.1.9.1.14
The continuity-counter errors seen on PIDs in this Program
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerVideoStreamEsTable 1.3.6.1.4.1.4115.1.9.1.1.1.10
This table stores basic information for each Elementary Stream in each Transport Stream known to the E6000. Each entry in cerVideoProgTable will have at least one entry in this table. These entries are created automatically as the E6000 processes PMT table entries for each Elementary Stream in a Program
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoStreamEsEntry

cerVideoStreamEsEntry 1.3.6.1.4.1.4115.1.9.1.1.1.10.1
Elementary stream status table
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoStreamEsEntry  

cervStreamEsTsMibIndex 1.3.6.1.4.1.4115.1.9.1.1.1.10.1.1
The unique index that identifies the Transport Stream containing this Program.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerTransportStreamIndex  

cervStreamEsProgIndex 1.3.6.1.4.1.4115.1.9.1.1.1.10.1.2
The Program Number for the program containing this ES.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerProgram  

cervStreamEsPidIndex 1.3.6.1.4.1.4115.1.9.1.1.1.10.1.3
The MPEG PID used for this Elementary Stream.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerPID  

cervStreamEsType 1.3.6.1.4.1.4115.1.9.1.1.1.10.1.4
The type of this Elementary Streams.
Status: current Access: read-only
OBJECT-TYPE    
  CerElementaryStreamType  

cervStreamEsDescCount 1.3.6.1.4.1.4115.1.9.1.1.1.10.1.5
The number of Descriptors in the PMT 'second_loop' for this Elementary Stream.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cervStreamEsContinuityErrCnt 1.3.6.1.4.1.4115.1.9.1.1.1.10.1.6
The continuity-counter errors seen on this PID.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cervStreamEsTspCount 1.3.6.1.4.1.4115.1.9.1.1.1.10.1.7
The number of MPEG frames (TSPs) seen on this PID.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerVideoStreamDataEsTable 1.3.6.1.4.1.4115.1.9.1.1.1.11
This table stores basic information for each data-only Elementary Stream in each Transport Stream known to the E6000. For is one row for each ghost-pid, whether or not it is being forwarded.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoStreamDataEsEntry

cerVideoStreamDataEsEntry 1.3.6.1.4.1.4115.1.9.1.1.1.11.1
Data-only Elementary stream status table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoStreamDataEsEntry  

cervStreamDataEsTsMibIndex 1.3.6.1.4.1.4115.1.9.1.1.1.11.1.1
The unique index that identifies the Transport Stream containing this Program.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerTransportStreamIndex  

cervStreamDataEsPidIndex 1.3.6.1.4.1.4115.1.9.1.1.1.11.1.2
The MPEG PID used for this Elementary Stream.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerPID  

cervStreamDataEsIsGhostPid 1.3.6.1.4.1.4115.1.9.1.1.1.11.1.3
True if this is a ghost PID. False if it is an si-stream PID (not supported yet).
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cervStreamDataEsForwarding 1.3.6.1.4.1.4115.1.9.1.1.1.11.1.4
True is we are forwarding this PID. False if we are dropping it.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cervStreamDataEsContinuityErrCnt 1.3.6.1.4.1.4115.1.9.1.1.1.11.1.5
The continuity-counter errors seen on this PID.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerVideoStreamDescTable 1.3.6.1.4.1.4115.1.9.1.1.1.12
This table stores MPEG Descriptors for each Elementary Stream and Program known to the E6000. The PMT PID is used to index Program Descriptors while the Elementary Stream PID is used when indexing ES Descriptors.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoStreamDescEntry

cerVideoStreamDescEntry 1.3.6.1.4.1.4115.1.9.1.1.1.12.1
Video stream descriptor table
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoStreamDescEntry  

cervStreamDescTsMibIndex 1.3.6.1.4.1.4115.1.9.1.1.1.12.1.1
The unique index that identifies the Transport Stream containing this Descriptor.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerTransportStreamIndex  

cervStreamDescPidIndex 1.3.6.1.4.1.4115.1.9.1.1.1.12.1.2
The MPEG PID used for this Elementary Stream.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerPID  

cervStreamDescIndex 1.3.6.1.4.1.4115.1.9.1.1.1.12.1.3
The Descriptor index.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerDescriptorIndex  

cervStreamDescTag 1.3.6.1.4.1.4115.1.9.1.1.1.12.1.4
The Descriptor tag.
Status: current Access: read-only
OBJECT-TYPE    
  CerDescriptorTag  

cervStreamDescLen 1.3.6.1.4.1.4115.1.9.1.1.1.12.1.5
The Descriptor length.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

cervStreamDescData 1.3.6.1.4.1.4115.1.9.1.1.1.12.1.6
The Descriptor data.
Status: current Access: read-only
OBJECT-TYPE    
  CerDescriptorBuffer  

cerVideoQamJitterStatusTable 1.3.6.1.4.1.4115.1.9.1.1.1.13
This Table contains status information about the QAM dejitter buffers on a per-program basis. Entries in this table only persist for the life-time of the active programs, and are created & deleted on the fly as programs are shutdown & restarted.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoQamJitterStatusEntry

cerVideoQamJitterStatusEntry 1.3.6.1.4.1.4115.1.9.1.1.1.13.1
Video Qam Jitter Status table
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoQamJitterStatusEntry  

cervQamJitterStatusIfIndex 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.1
The ifIndex of the QAM channel associated with this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

cervQamJitterStatusProgNumber 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.2
The output program number associated with this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerProgram  

cervQamJitterStatusCurrStatus 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.3
The status of the jitter buffer for this program. idle - waiting for input TS packets init - transmitting TS packets at nominal rate, not locked to incoming PCR active - normal passing traffic, locked to incoming PCR freeRunning - normal passing traffic, no PCR to lock to
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), init(2), active(3), freeRunning(4)  

cervQamJitterStatusUnderflowCnt 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.4
Number of times the jitter buffer has underflowed during the lifetime of this program.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cervQamJitterStatusOverflowCnt 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.5
Number of times the jitter buffer has overflowed during the lifetime of this program.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cervQamJitterStatusBufLength 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.6
The current size of the jitter buffer for this program in milliseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cervQamJitterStatusPcrJitter 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.7
The estimate of the current network jitter.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cervQamJitterStatusPcrCnt 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.8
The total number of PCR samples processed in this program.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cervQamJitterStatusPcrDiscontinuityCnt 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.9
The total number of PCR discontinuities observed in this program.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cervQamJitterStatusBufDepth 1.3.6.1.4.1.4115.1.9.1.1.1.13.1.10
The initial jitter-buffer depth in milliseconds for this program stream. May have been dynamically set via R6 NGOD interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..500  

cerVideoProgRemapTable 1.3.6.1.4.1.4115.1.9.1.1.1.14
This table displays the active Program mappings for Transport Streams. It is indexed using udp/ip/ip/inProg/qamIfIndex to support multiple output programs for each input program.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoProgRemapEntry

cerVideoProgRemapEntry 1.3.6.1.4.1.4115.1.9.1.1.1.14.1
Program to transport stream mapping table
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoProgRemapEntry  

cervProgRemapTsMibIndex 1.3.6.1.4.1.4115.1.9.1.1.1.14.1.1
The TS Mib Index of the incoming TS.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerTransportStreamIndex  

cervProgRemapInProgIndex 1.3.6.1.4.1.4115.1.9.1.1.1.14.1.2
The incoming Program value related to this Program remapping.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerProgram  

cervProgRemapActiveQamIfIndex 1.3.6.1.4.1.4115.1.9.1.1.1.14.1.3
The ifIndex of the QAM channel that this Program remapping applies to.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

cervProgRemapOutProg 1.3.6.1.4.1.4115.1.9.1.1.1.14.1.4
The output Program value related to this Program mapping rule.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerProgram  

cervProgRemapTimeActivated 1.3.6.1.4.1.4115.1.9.1.1.1.14.1.5
The value of sysUpTime when this Program was last activated. Zero if not-applicable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

cervProgRemapTimeActive 1.3.6.1.4.1.4115.1.9.1.1.1.14.1.6
The total time that the Program has been active.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cerVideoPidRemapTable 1.3.6.1.4.1.4115.1.9.1.1.1.15
This table displays the active PID mappings for Transport Streams. It is indexed using udp/ip/ip/inPid/qamIfIndex to support multiple output programs for each input program.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoPidRemapEntry

cerVideoPidRemapEntry 1.3.6.1.4.1.4115.1.9.1.1.1.15.1
PID to transport stream mapping table
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoPidRemapEntry  

cervPidRemapTsMibIndex 1.3.6.1.4.1.4115.1.9.1.1.1.15.1.1
The TS Mib Index of the incoming TS.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerTransportStreamIndex  

cervPidRemapInPidIndex 1.3.6.1.4.1.4115.1.9.1.1.1.15.1.2
The incoming PID value related to this PID remapping.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerPID  

cervPidRemapActiveQamIfIndex 1.3.6.1.4.1.4115.1.9.1.1.1.15.1.3
The ifIndex of the QAM channel that this PID remapping applies to.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

cervPidRemapOutPid 1.3.6.1.4.1.4115.1.9.1.1.1.15.1.4
The output PID value related to this PID mapping rule.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerPID  

cervPidRemapActivePidType 1.3.6.1.4.1.4115.1.9.1.1.1.15.1.5
The type of PID whether PSI or Elementary stream.
Status: current Access: read-only
OBJECT-TYPE    
  CerPidType  

cervPidRemapTimeActivated 1.3.6.1.4.1.4115.1.9.1.1.1.15.1.6
The value of sysUpTime when this PID was last activated. Zero if not-applicable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

cervPidRemapTimeActive 1.3.6.1.4.1.4115.1.9.1.1.1.15.1.7
The total time that the PID has been active.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cerVideoLookupTsMibIndexToIfIndexTable 1.3.6.1.4.1.4115.1.9.1.1.1.17
This table maps the TsIndex of an outgoing Transport Stream on a QAM channel to the ifIndex for that channel. The Transport Stream is assumed to be an 'outgoing' one.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoLookupTsMibIndexToIfIndexEntry

cerVideoLookupTsMibIndexToIfIndexEntry 1.3.6.1.4.1.4115.1.9.1.1.1.17.1
TSID to QAM channel mapping table
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoLookupTsMibIndexToIfIndexEntry  

cervLookupTsIndexIfIndex 1.3.6.1.4.1.4115.1.9.1.1.1.17.1.1
The ifIndex for the QAM channel transmitting this TransportStreamIndex.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

cerVideoLookupQamTsMibIndexToInTsMibIndexTable 1.3.6.1.4.1.4115.1.9.1.1.1.18
This table maps the TransportStreamIndex of a Transport Stream on a QAM channel to the corresponding incoming TransportStreamIndexes. cervTsMibIndex - an outgoing Transport Stream cervInTsMibIndex - the corresponding incoming Transport Stream.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoLookupQamTsMibIndexToInTsMibIndexEntry

cerVideoLookupQamTsMibIndexToInTsMibIndexEntry 1.3.6.1.4.1.4115.1.9.1.1.1.18.1
TSID to incoming transport stream mapping table
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoLookupQamTsMibIndexToInTsMibIndexEntry  

cervLookupInTsMibIndex 1.3.6.1.4.1.4115.1.9.1.1.1.18.1.1
MIB TsIndex for an incoming transport stream(IP).
Status: current Access: read-only
OBJECT-TYPE    
  CerTransportStreamIndex  

cerVideoLookupTsMibIndexToUdpIpTable 1.3.6.1.4.1.4115.1.9.1.1.1.19
This table maps the TransportStreamIndex of an incoming Transport Stream to the IP address and UDP port for that Transport Stream.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoLookupTsMibIndexToUdpIpEntry

cerVideoLookupTsMibIndexToUdpIpEntry 1.3.6.1.4.1.4115.1.9.1.1.1.19.1
TSID to IP address and port mapping table
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoLookupTsMibIndexToUdpIpEntry  

cervLookupTsMibIndexUdpPort 1.3.6.1.4.1.4115.1.9.1.1.1.19.1.1
The UDP receiving the Transport Stream for TransportStreamIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cervLookupTsMibIndexIpAddrDest 1.3.6.1.4.1.4115.1.9.1.1.1.19.1.2
The DEST IP address receiving the Transport Stream for TransportStreamIndex.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv4or6  

cervLookupTsMibIndexIpAddrSrc 1.3.6.1.4.1.4115.1.9.1.1.1.19.1.3
The SRC IP address receiving the Transport Stream for TransportStreamIndex.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv4or6  

cervLookupTsMibIndexAddrType 1.3.6.1.4.1.4115.1.9.1.1.1.19.1.4
Type of IP address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

cervLookupTsMibIndexVe 1.3.6.1.4.1.4115.1.9.1.1.1.19.1.5
The VE for this TsMibIndex.
Status: current Access: read-only
OBJECT-TYPE    
  CerVirtualEdgeIndexType  

cerVirtualEdgeTable 1.3.6.1.4.1.4115.1.9.1.1.1.20
This table stores parameters for each Virtual Edge video object.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVirtualEdgeEntry

cerVirtualEdgeEntry 1.3.6.1.4.1.4115.1.9.1.1.1.20.1
Virtual Edge configuration parameter table
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVirtualEdgeEntry  

cerveIndex 1.3.6.1.4.1.4115.1.9.1.1.1.20.1.1
The index of the Virtual Edge. Although not officially supported, allow a VE for each of 12 DCAMs.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CerVirtualEdgeIndexType  

cerveName 1.3.6.1.4.1.4115.1.9.1.1.1.20.1.2
This is the name of the Virtual Edge.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

cervePortMap 1.3.6.1.4.1.4115.1.9.1.1.1.20.1.3
Only 8x8 and session is currently supported. Ignored for sdv-only channels. Manual mapping, where individual streams manually configured to map to channela in this VE are forwarded, may in the future be supported in addition to those allowed by this element.
Status: current Access: read-create
OBJECT-TYPE    
  CerUdpPortMapType  

cerveSzIndex 1.3.6.1.4.1.4115.1.9.1.1.1.20.1.4
Index of Streaming Zone used by this Virtual Edge. Multiple Virtual Edges may have the same SZ. Zero means unassigned.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..7  

cerveGlobal 1.3.6.1.4.1.4115.1.9.1.1.1.20.1.5
Whether or not this VE spans all DCAMs. Can only be set when the row is created.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

cerveAdminState 1.3.6.1.4.1.4115.1.9.1.1.1.20.1.6
Setting the VE AdminState to down blocks all video traffic to all video channels in the VE. It also takes down any ERM connection to the VE. It does not change the channel state of the channels in the VE.
Status: current Access: read-create
OBJECT-TYPE    
  AdminState  

cerveRowStatus 1.3.6.1.4.1.4115.1.9.1.1.1.20.1.7
The RowStatus for controlling entries in this table. Allowed values are createAndGo, destroy, and active.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cerveStatusTable 1.3.6.1.4.1.4115.1.9.1.1.1.21
This table stores statistics for each Virtual Edge video object.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerveStatusEntry

cerveStatusEntry 1.3.6.1.4.1.4115.1.9.1.1.1.21.1
Virtual Edge statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerveStatusEntry  

cerveStatusDroppedPkts 1.3.6.1.4.1.4115.1.9.1.1.1.21.1.2
Number of incoming UDP packets to one of this VE's data plane addresses whose DPORT was not currently valid and was therefore dropped by the NPU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerveStatusBlockedPkts 1.3.6.1.4.1.4115.1.9.1.1.1.21.1.3
Number of incoming UDP packets whose DPORT was in the valid subrange, but whose DPORT was on the blocked list, so the packet was dropped by the NPU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerveStatusFragmentedPkts 1.3.6.1.4.1.4115.1.9.1.1.1.21.1.4
Number of incoming UDP packets with a valid DIP and DPORT, but were dropped by the NPU because they were fragmented.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerveStatusOperStatus 1.3.6.1.4.1.4115.1.9.1.1.1.21.1.7
Whether the VE is operationally IS or OOS. It is IS if any channel in the VE is IS.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER is(1), oos(2)  

cerveErmSrvDiscTable 1.3.6.1.4.1.4115.1.9.1.1.1.22
This table stores parameters for each Virtual Edge video ERM object, if defined.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerveErmSrvDiscEntry

cerveErmSrvDiscEntry 1.3.6.1.4.1.4115.1.9.1.1.1.22.1
Virtual Edge ERM configuration parameter table
Status: current Access: not-accessible
OBJECT-TYPE    
  CerveErmSrvDiscEntry  

cerveErmSrvDiscErmIndex 1.3.6.1.4.1.4115.1.9.1.1.1.22.1.2
This is the ERM used for this Virtual Edge. Multiple VEs may use same ERM. Zero means unassigned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7  

cerveErmSrvDiscComponentName 1.3.6.1.4.1.4115.1.9.1.1.1.22.1.3
The ERM component name used on the service discovery interface, which is unique per VE.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..64)  

cerveErmSrvDiscAdminState 1.3.6.1.4.1.4115.1.9.1.1.1.22.1.4
Whether or not the VE servicediscovery interface is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  AdminState  

cerveErmSrvDiscControlIpAddr 1.3.6.1.4.1.4115.1.9.1.1.1.22.1.5
This is the source loopback address used when communicating with the ERM and for receiving messages from the ERM.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressIPv4or6  

cerveErmSrvDiscAddrType 1.3.6.1.4.1.4115.1.9.1.1.1.22.1.6
Type of IP address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

cerveErmSrvDiscControlIfIndex 1.3.6.1.4.1.4115.1.9.1.1.1.22.1.7
The ifIndex of the loopback interface for communicating with an ERM.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

cerveErmSrvDiscRowStatus 1.3.6.1.4.1.4115.1.9.1.1.1.22.1.8
The RowStatus for controlling entries in this table. Allowed values are createAndGo, destroy, and active.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cerveErmD6StatTable 1.3.6.1.4.1.4115.1.9.1.1.1.23
This table stores ERM NGOD D6 statistics for each Virtual Edge video object. A row in this table is autocreated when a row in the cerveErmSvcDiscTable is Created and cervErmProtocol is set to ngod. Another status table would be added in the future when we support cervErmProtocol nmi.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerveErmD6StatEntry

cerveErmD6StatEntry 1.3.6.1.4.1.4115.1.9.1.1.1.23.1
Virtual Edge ERM statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerveErmD6StatEntry  

cerveErmD6StatTcpConnSuccess 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.2
Number of successful TCP connections to ERM.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerveErmD6StatTcpConnFail 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.3
Number of failed attempts to create a TCP connection to the ERM.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerveErmD6StatVrepEstablishTime 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.4
Timestamp when last VREP Establish state was reached with ERM.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

cerveErmD6StatVrepOpenSent 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.5
Number of VREP OPEN messages sent to ERM
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerveErmD6StatVrepOpenRcvd 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.6
Number of VREP OPEN messages received from ERM
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerveErmD6StatUpdsSent 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.7
Number of VREP UPDATE messages sent to ERM.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerveErmD6StatUpdsRcvd 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.8
Number of VREP UPDATE messages received from ERM.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerveErmD6StatVrepKeepAliveSent 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.9
Number of Keep Alive messages sent to ERM.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerveErmD6StatVrepKeepAliveRcvd 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.10
Number of Keep Alive messages received from ERM.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerveErmD6StatRemoteSzName 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.11
Contains the Streaming Zone name from the ERM.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cerveErmD6StatRemoteCompName 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.12
Contains the component name from the ERM.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cerveErmD6StatRemoteVrepId 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.13
Contains VREP ID at the ERM.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cerveErmD6StatRemoteVrepVersion 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.14
Contains VREP version at the ERM.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cerveErmD6StatRemoteVrepRoutes 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.15
Contains the number of active routes from the ERM for this VE.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cerveErmD6StatRemoteHoldTime 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.16
Contains VREP/DRRP hold-time in seconds from the ERM for connection timeout. Zero means do not time-out.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

cerveErmD6StatVrepStatus 1.3.6.1.4.1.4115.1.9.1.1.1.23.1.17
The current state of the VREP state machine (the D6 TCP connection to the ERM).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6)  

cerveDataAddrMapTable 1.3.6.1.4.1.4115.1.9.1.1.1.24
This table contains the data plane addresses for the VE objects.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerveDataAddrMapEntry

cerveDataAddrMapEntry 1.3.6.1.4.1.4115.1.9.1.1.1.24.1
Dataplane IP addresses to virtual edge mapping table
Status: current Access: not-accessible
OBJECT-TYPE    
  CerveDataAddrMapEntry  

cerveDataAddrMapIpAddr 1.3.6.1.4.1.4115.1.9.1.1.1.24.1.2
This a data plane address for the VE. All UDP packets to this address are port-mapped.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressIPv4or6  

cerveDataAddrMapAddrType 1.3.6.1.4.1.4115.1.9.1.1.1.24.1.3
Type of IP address.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

cerveDataAddrMapIfIndex 1.3.6.1.4.1.4115.1.9.1.1.1.24.1.4
The ifIndex of the loopback interface used to assign the dataplane address.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

cerveDataAddrMapEdgeInputGrp 1.3.6.1.4.1.4115.1.9.1.1.1.24.1.5
The edge input group for reporting to RAMSDEN.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

cerveDataAddrMapErmInputPort 1.3.6.1.4.1.4115.1.9.1.1.1.24.1.6
The input port number used by the ERM for session-based VOD port mapping. Zero means no value is set.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..6  

cerveDataAddrMapRowStatus 1.3.6.1.4.1.4115.1.9.1.1.1.24.1.7
The RowStatus for controlling entries in this table. Allowed values are createAndGo, destroy, and active.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cerveInputPortTable 1.3.6.1.4.1.4115.1.9.1.1.1.25
This table maps the session-based VOD input port number to a dataplane address.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerveInputPortEntry

cerveInputPortEntry 1.3.6.1.4.1.4115.1.9.1.1.1.25.1
Input port number to a dataplane address mapping table
Status: current Access: not-accessible
OBJECT-TYPE    
  CerveInputPortEntry  

cerveInputPortErmInputPort 1.3.6.1.4.1.4115.1.9.1.1.1.25.1.2
The input port number used by the ERM for session-based VOD port mapping. Zero means no value is set.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..20  

cerveInputPortIpAddr 1.3.6.1.4.1.4115.1.9.1.1.1.25.1.3
This a data plane address for the VE. All UDP packets to this address are port-mapped.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv4or6  

cerveInputPortAddrType 1.3.6.1.4.1.4115.1.9.1.1.1.25.1.4
Type of IP address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

cerveUdpPortMapTable 1.3.6.1.4.1.4115.1.9.1.1.1.26
This table contains the blocks of UDP ports in a VE that are currently mapped to a Qam channel. This table is only used when cervePortMap is set to 8x8 or 10x6.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerveUdpPortMapEntry

cerveUdpPortMapEntry 1.3.6.1.4.1.4115.1.9.1.1.1.26.1
UDP port to QAM channel mapping table
Status: current Access: not-accessible
OBJECT-TYPE    
  CerveUdpPortMapEntry  

cerveUdpPortMapUdpBasePort 1.3.6.1.4.1.4115.1.9.1.1.1.26.1.2
This is the lowest port number in the block of UDP ports mapped to this QAM channel. The total number of UDP ports in this block depends on the type of port map used for this VE; if the map is type map8x8, then there are 256 ports in the block and the upper eight bits are the UDP block ID. If it is type type map10x6, then there are 64 ports in the block, and the upper six bits are the block ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..65535  

cerveUdpPortMapQamIfIndex 1.3.6.1.4.1.4115.1.9.1.1.1.26.1.3
This is the ifIndex of the QAM channel to which this block of UDP ports maps. Is unique among all rows in the table.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

cerveBandwidthTable 1.3.6.1.4.1.4115.1.9.1.1.1.27
This table describes the bandwidth on NSI links belonging to this virtual edge (for reporting To an ERM).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerveBandwidthEntry

cerveBandwidthEntry 1.3.6.1.4.1.4115.1.9.1.1.1.27.1
Bandwidth allocation configuration for a virtual edge
Status: current Access: not-accessible
OBJECT-TYPE    
  CerveBandwidthEntry  

cerveBandIpAddr 1.3.6.1.4.1.4115.1.9.1.1.1.27.1.2
This a data plane address for the Virtual Edge being assigned this bandwidth. Must be an address already assigned to the VE.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressIPv4or6  

cerveBandIfIndex 1.3.6.1.4.1.4115.1.9.1.1.1.27.1.3
This is the ifIndex of the ethernet or link-aggregate interface for the interface whose bandwidth is being assigned to this VE.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

cerveBandAllocation 1.3.6.1.4.1.4115.1.9.1.1.1.27.1.4
The amount of bandwidth in Kbps of the NSI interface to be reported for the VE over the service discovery ERM connection.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..100000000  

cerveBandAddrType 1.3.6.1.4.1.4115.1.9.1.1.1.27.1.5
Type of IP address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

cerveBandRowStatus 1.3.6.1.4.1.4115.1.9.1.1.1.27.1.6
The RowStatus for controlling entries in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cerveUdpBlockedPortTable 1.3.6.1.4.1.4115.1.9.1.1.1.28
A row in this table contains the a range of one or more UDP ports, where any ingress UDP stream with a port in this range to any of the VE dataplane addresses must be dropped. This table only applies to table-based VOD streams.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerveUdpBlockedPortEntry

cerveUdpBlockedPortEntry 1.3.6.1.4.1.4115.1.9.1.1.1.28.1
Blocked UDP port mapping for a virtual edge
Status: current Access: not-accessible
OBJECT-TYPE    
  CerveUdpBlockedPortEntry  

cerveUdpBlockedPortIpAddr 1.3.6.1.4.1.4115.1.9.1.1.1.28.1.2
This a data plane address for the Virtual Edge where the UDP is being blocked. Must be an address already assigned to the VE or 0.0.0.0, which means that the port is blocked for every VE dataplane address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressIPv4or6  

cerveUdpBlockedPortLowPort 1.3.6.1.4.1.4115.1.9.1.1.1.28.1.3
This is the low port number to be blocked for the VE.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

cerveUdpBlockedPortHighPort 1.3.6.1.4.1.4115.1.9.1.1.1.28.1.4
This is the high port number to be blocked. Is same as low port if only a one port range.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..65535  

cerveUdpBlockedPortAddrType 1.3.6.1.4.1.4115.1.9.1.1.1.28.1.5
Type of IP address.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

cerveUdpBlockedPortRowStatus 1.3.6.1.4.1.4115.1.9.1.1.1.28.1.6
The RowStatus for controlling entries in this table. Allowed values are createAndGo, destroy, and active.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cerErmSrvDiscTable 1.3.6.1.4.1.4115.1.9.1.1.1.29
This table describes the configuration parameters associated with remote Edge Resource Manager (ERM) devices. Use of multiple entries within this table enables the logical separation of the Cer to multiple ERMs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerErmSrvDiscEntry

cerErmSrvDiscEntry 1.3.6.1.4.1.4115.1.9.1.1.1.29.1
An entry corresponds to an individual ERM configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerErmSrvDiscEntry  

cerErmSrvDiscIndex 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.1
Index of ERM configuration entry.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 1..7  

cerErmSrvDiscName 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.2
Name of ERM configuration entry.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

cerErmSrvDiscDescription 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.3
Contains text description of the ERM configuration.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

cerErmSrvDiscAddrType 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.4
Type of IP address.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

cerErmSrvDiscRemoteIpAddr 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.5
The ERM remote address. An IPv4 address or hostname is acceptable as an address.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

cerErmSrvDiscRemoteFqdnIpAddr 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.6
The IP address for an FQDN in cerErmRemoteIpName. This is 0.0.0.0 if cerErmSrvDiscRemoteIpAddr is an IPv4 address.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressIPv4or6  

cerErmSrvDiscPort 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.7
Contains TCP port value used for DRRP listener/connections.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1024..65535  

cerErmSrvDiscHoldTime 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.8
Contains VREP/DRRP hold-time in seconds for connection timeout
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 4..65535  

cerErmSrvDiscKeepAliveTime 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.9
Contains VREP/DRRP interval in seconds for sending keep-alive messages. Must be less than cerErmHoldTime.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 3..65535  

cerErmSrvDiscBwInterval 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.10
Interval in seconds to send AvailableBandwidth UDPATE messages. Zero means no reporting of bandwidth.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

cerErmSrvDiscBwThreshold 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.11
Change in bandwith utilisation in Kbps required to trigger an AvailableBandwidth UDPATE messages.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 50..65535  

cerErmSrvDiscCost 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.12
Cost to advertise in VREP OPEN message.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

cerErmSrvDiscConnRetryTimeout 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.13
The maximum time to wait before retrying establishing the ERM connection.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 30..600  

cerErmSrvDiscRowStatus 1.3.6.1.4.1.4115.1.9.1.1.1.29.1.14
The values that control the creation/deletion of ERMs on the CER.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cerStreamingZoneTable 1.3.6.1.4.1.4115.1.9.1.1.1.30
Table mapping a streaming zone index to a streaming zone name. Duplicate TSIDs must be in different SZs. Each VE is in one SZ.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerStreamingZoneEntry

cerStreamingZoneEntry 1.3.6.1.4.1.4115.1.9.1.1.1.30.1
Table mapping a streaming zone index to a streaming zone name.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerStreamingZoneEntry  

cervSzIndex 1.3.6.1.4.1.4115.1.9.1.1.1.30.1.1
MIB Index for a streaming zone.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..7  

cervSzQamNetworkId 1.3.6.1.4.1.4115.1.9.1.1.1.30.1.2
Network ID for a streaming zone. Must be unique for all streaming zones. Zero means not set.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

cervSzName 1.3.6.1.4.1.4115.1.9.1.1.1.30.1.3
Configured name of the streaming zone.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

cervSzVpmeSdIndex 1.3.6.1.4.1.4115.1.9.1.1.1.30.1.4
The security-domain instance number uniquely identifies the VPME instance for the E6000. Zero means no SD is assigned.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..7  

cervSzRowStatus 1.3.6.1.4.1.4115.1.9.1.1.1.30.1.5
The values that control the creation/deletion of streaming zones on the CER.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cerVideoCountsTable 1.3.6.1.4.1.4115.1.9.1.1.1.31
This table stores IEQ video counts for each DCAM.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CerVideoCountsEntry

cerVideoCountsEntry 1.3.6.1.4.1.4115.1.9.1.1.1.31.1
IEQ Video counts per DCAM.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerVideoCountsEntry  

cerVideoCountsCardId 1.3.6.1.4.1.4115.1.9.1.1.1.31.1.1
This the slot number of DCAM doing the counts.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..6 | 9..14  

cerVideoCountsBadSyncPkts 1.3.6.1.4.1.4115.1.9.1.1.1.31.1.2
Number of incoming port-mapped UDP packets dropped because of not containing valid MPEG.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerVideoCountsDroppedPkts 1.3.6.1.4.1.4115.1.9.1.1.1.31.1.3
Number of valid incoming MPEG packets that were were dropped by the DCAM because of a program number conflict, oversubscription condition, or MPTS pass-thru conflict.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerVideoCountsFragments 1.3.6.1.4.1.4115.1.9.1.1.1.31.1.4
Number of multicast packet fragments dropped in the DCAM.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cerVideoTrapsInfo 1.3.6.1.4.1.4115.1.9.1.1.1.32
OBJECT IDENTIFIER    

cerVideoStatus 1.3.6.1.4.1.4115.1.9.1.1.1.32.1
ERM connection status of E6000.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6)  

cerVideoErrorStr 1.3.6.1.4.1.4115.1.9.1.1.1.32.2
Description of error encountered on the ERM interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString Size(0..100)  

cerVideoNotifs 1.3.6.1.4.1.4115.1.9.1.1.1.33
OBJECT IDENTIFIER    

cerVideoTraps 1.3.6.1.4.1.4115.1.9.1.1.1.33.0
OBJECT IDENTIFIER    

cerVideoSrvDiscErmConnection 1.3.6.1.4.1.4115.1.9.1.1.1.33.0.1
This trap is sent when the Service Discovery ERM connection fails. This can occur for a number of reasons, the Virtual Edge may not be able to successfully establish the connection, the OPEN message negotiation may fail, the ERM may closed the connection, the Hold Time may expire, a NOTIFICATION message may be received, etc.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cerVideoStreamFailure 1.3.6.1.4.1.4115.1.9.1.1.1.33.0.2
This trap is sent when the E6000 detects a problem with the incoming video stream. This can be a problem parsing a PAT or PMT in the stream, a jitter buffer underflow or overflow, non-MPEG data on the stream.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cerVideoServiceFailure 1.3.6.1.4.1.4115.1.9.1.1.1.33.0.3
This trap is sent when the E6000 detects a problem with forwarding an incoming stream to a QAM channel. This can be as a result of the UDP port being blocked, there is no matching UDP port on an IS QAM channel, the potential of creating a program number conflict on the QAM channel, the program number limit has been reached on the QAM channel, etc.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cerVideoQamOversubscription 1.3.6.1.4.1.4115.1.9.1.1.1.33.0.4
This trap is sent when the E6000 detects oversubscription on a QAM channel and has taken corrective action.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE