ARUBAWIRED-RPVST-MIB

File: ARUBAWIRED-RPVST-MIB.mib (48608 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
Q-BRIDGE-MIB ARUBAWIRED-NETWORKING-OID IF-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE TimeTicks
Counter32 NOTIFICATION-TYPE Integer32
DateAndTime DisplayString MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP VlanIndex
wndFeatures InterfaceIndex TruthValue
MacAddress TEXTUAL-CONVENTION

Defined Types

PointToPoint  
forceTrue: This value indicates that the administrator requires the MAC to be treated as if it is connected to a point-to-point LAN segment, regardless of any indications to the contrary that are generated by the MAC entity. forceFalse: This value indicates that the administrator requires the MAC to be treated as if it is connected to a non-point-to-point LAN segment, regardless of any indications to the contrary that are generated by the MAC entity. auto: This value indicates that the administrator requires the point-to-point status of the MAC to be determined in accordance with the specific MAC procedures defined in 6.5.
TEXTUAL-CONVENTION    
  INTEGER forceTrue(1), forceFalse(2), auto(3)  

ArubaWiredRpvstVlanEntry  
SEQUENCE    
  arubaWiredRpvstVlanId VlanIndex
  arubaWiredRpvstVlanHelloTime Integer32
  arubaWiredRpvstVlanForwardDelay Integer32
  arubaWiredRpvstVlanMaxAge Integer32
  arubaWiredRpvstVlanPriority Integer32
  arubaWiredRpvstVlanRoot INTEGER
  arubaWiredRpvstVlanRpvstAdminStatus INTEGER
  arubaWiredRpvstVlanResetCounters TruthValue
  arubaWiredRpvstVlanOperHelloTime Integer32
  arubaWiredRpvstVlanRootPriority Integer32
  arubaWiredRpvstVlanRootPort InterfaceIndex
  arubaWiredRpvstVlanRootPathCost Integer32
  arubaWiredRpvstVlanRootMacAddress MacAddress
  arubaWiredRpvstVlanRootChangeCounter Counter32
  arubaWiredRpvstVlanTimeSinceLastTopoChange TimeTicks
  arubaWiredRpvstVlanTopoChangeCount Counter32
  arubaWiredRpvstVlanSendTopoChangeCtrl TruthValue
  arubaWiredRpvstVlanLogPortStateTransitions TruthValue

ArubaWiredRpvstPortEntry  
SEQUENCE    
  arubaWiredRpvstPortIndex InterfaceIndex
  arubaWiredRpvstPortAdminEdge TruthValue
  arubaWiredRpvstPortAdminPointToPoint PointToPoint
  arubaWiredRpvstPortAutoEdge TruthValue
  arubaWiredRpvstPortBpduFiltering TruthValue
  arubaWiredRpvstPortRestrictedTcn TruthValue
  arubaWiredRpvstPortRootGuard TruthValue
  arubaWiredRpvstPortLoopGuard TruthValue
  arubaWiredRpvstPortBpduProtection TruthValue

ArubaWiredRpvstPortVlanEntry  
SEQUENCE    
  arubaWiredRpvstPortVlanId VlanIndex
  arubaWiredRpvstPortVlanIndex InterfaceIndex
  arubaWiredRpvstPortVlanPathCost Integer32
  arubaWiredRpvstPortVlanPriority Integer32
  arubaWiredRpvstPortVlanResetCounters TruthValue
  arubaWiredRpvstPortVlanRole INTEGER
  arubaWiredRpvstPortVlanState INTEGER
  arubaWiredRpvstPortVlanDesigBridge MacAddress
  arubaWiredRpvstPortVlanOperPointToPoint TruthValue
  arubaWiredRpvstPortVlanOperEdge TruthValue
  arubaWiredRpvstPortVlanInconsistencyReason INTEGER

ArubaWiredRpvstNotificationEntry  
SEQUENCE    
  arubaWiredRpvstPortName DisplayString
  arubaWiredRpvstVlanIndex Integer32
  arubaWiredRpvstPortVlanErrantBpduRxCount Integer32
  arubaWiredRpvstErrantBpduSrcMac MacAddress
  arubaWiredRpvstSuperiorBpduSrcPort DisplayString
  arubaWiredRpvstSuperiorBpduSrcMac MacAddress
  arubaWiredRpvstErrantBpduDetector INTEGER
  arubaWiredRpvstDesignatedPort DisplayString
  arubaWiredRpvstOldPortRole DisplayString
  arubaWiredRpvstNewPortRole DisplayString
  arubaWiredRpvstTopoChangeTime DateAndTime
  arubaWiredRpvstPreviousRootBridgeID DisplayString
  arubaWiredRpvstNewRootBridgeID DisplayString
  arubaWiredRpvstRootBridgeChangeTimeStamp DateAndTime
  arubaWiredRpvstId Integer32

Defined Values

arubaWiredRpvstMIB 1.3.6.1.4.1.47196.4.1.1.3.5
This MIB module for Rapid Per VLAN Spanning Tree(RPVST).
MODULE-IDENTITY    

arubaWiredRpvstNotifications 1.3.6.1.4.1.47196.4.1.1.3.5.0
OBJECT IDENTIFIER    

arubaWiredRpvstObjects 1.3.6.1.4.1.47196.4.1.1.3.5.1
OBJECT IDENTIFIER    

arubaWiredRpvstConformance 1.3.6.1.4.1.47196.4.1.1.3.5.2
OBJECT IDENTIFIER    

arubaWiredRpvstGeneralGroup 1.3.6.1.4.1.47196.4.1.1.3.5.1.1
OBJECT IDENTIFIER    

arubaWiredRpvstResetCounters 1.3.6.1.4.1.47196.4.1.1.3.5.1.1.1
Setting this object to true(1) will reset all the RPVST counters. Setting this to false(2) is no operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstExtendedSystemID 1.3.6.1.4.1.47196.4.1.1.3.5.1.1.2
Creates a unique bridge identifier for each VLAN by adding the VLAN ID (vid) value to the priority field of the bridge identifier in every RPVST BPDU. Indicates whether Extended System ID feature is enabled or not.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstIgnorePVIDInconsistency 1.3.6.1.4.1.47196.4.1.1.3.5.1.1.3
Setting this object to True(1) will enable RPVST to run on mismatched PVID links.Once set it will apply to all RPVST instances
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstPathCostMode 1.3.6.1.4.1.47196.4.1.1.3.5.1.1.4
arubaWiredRpvstPathCostMode controls which pathcost mode to use. A device can function in one of the 3 modes defined below. pathCost8021d - The device calculates the default path cost for ports based on IEEE 802.1d. pathCost8021t - The device calculates the default path cost for ports based on IEEE 802.1t. proprietary -The device calculates the default path cost for ports based on the proprietary standard. Link Speed Vs Pathcost Table ---------------------------------------------------------- |Link speed| Pathcost in | Pathcost in | Pathcost in | | | IEEE802.1d | IEEE 802.1t | private standard| ---------------------------------------------------------- | 10 Mbps | 100 | 2,000,000 | 100 | ---------------------------------------------------------- | 100 Mbps | 10 | 200,000 | 19 | ---------------------------------------------------------- | 1000 Mbps| 4 | 20,000 | 4 | ---------------------------------------------------------- | 10 Gbps | 1 | 2,000 | 2 | ----------------------------------------------------------
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pathCost8021d(1), pathCost8021t(2), proprietary(3)  

arubaWiredRpvstVlanTable 1.3.6.1.4.1.47196.4.1.1.3.5.1.2
Information describing the RPVST configuration and statistics of the VLANs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArubaWiredRpvstVlanEntry

arubaWiredRpvstVlanEntry 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1
Information describing the RPVST configuration and statistics of each of the VLANs.
Status: current Access: not-accessible
OBJECT-TYPE    
  ArubaWiredRpvstVlanEntry  

arubaWiredRpvstVlanId 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.1
A VLAN ID to uniquely identify the entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanIndex  

arubaWiredRpvstVlanHelloTime 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.2
The amount of time between the transmission of configuration BPDUs by this node on any port in this VLAN when it is root of the spanning tree, or trying to become so for this VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 2..10  

arubaWiredRpvstVlanForwardDelay 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.3
The amount of time between transitioning from listening to learning and learning to forwarding by this node on any port when it is acting as a root for this VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 4..30  

arubaWiredRpvstVlanMaxAge 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.4
The maximum age of RPVST information learned from the network on any port before it is discarded.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 6..40  

arubaWiredRpvstVlanPriority 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.5
The value of the write-able portion of the Bridge ID (i.e., the first two octets of the (8 octet long) Bridge ID). The other (last) 6 octets of the Bridge ID are given by the value dot1dBridgeBaseAddress.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

arubaWiredRpvstVlanRoot 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.6
To explicitly configure this switch to be primary/secondary root for this VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), primary(1), secondary(2)  

arubaWiredRpvstVlanRpvstAdminStatus 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.7
To enable/disable RPVST on the VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

arubaWiredRpvstVlanResetCounters 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.8
Setting this object to true(1) will reset the RPVST counters for this VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstVlanOperHelloTime 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.9
The amount of time between the transmission of BPDUs by this node on any port in this VLAN when it is root of the spanning tree, or trying to become so for this VLAN. This is the actual value that this bridge is using.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..10  

arubaWiredRpvstVlanRootPriority 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.10
The priority of root bridge in this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

arubaWiredRpvstVlanRootPort 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.11
The root port for this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

arubaWiredRpvstVlanRootPathCost 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.12
The path cost to the Root from this bridge in this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..200000000  

arubaWiredRpvstVlanRootMacAddress 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.13
MAC address of the Root in this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

arubaWiredRpvstVlanRootChangeCounter 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.14
The number of times the root has changed for this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

arubaWiredRpvstVlanTimeSinceLastTopoChange 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.15
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity for this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

arubaWiredRpvstVlanTopoChangeCount 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.16
The total number of topology changes detected by this bridge in this VLAN since the management entity was last reset or initialized.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

arubaWiredRpvstVlanSendTopoChangeCtrl 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.17
Setting this object to true(1) will enable sending of SNMP notifications for all topology change events on this VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstVlanLogPortStateTransitions 1.3.6.1.4.1.47196.4.1.1.3.5.1.2.1.18
Setting this object to true(1) will enable event logging of PVST port state transitions for this VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstPortTable 1.3.6.1.4.1.47196.4.1.1.3.5.1.3
Information describing the RPVST specific configuration and statistics of the ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArubaWiredRpvstPortEntry

arubaWiredRpvstPortEntry 1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1
Information describing the RPVST specific configuration and statistics of the ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  ArubaWiredRpvstPortEntry  

arubaWiredRpvstPortIndex 1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.1
The port ifIndex
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

arubaWiredRpvstPortAdminEdge 1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.2
The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port. Note that even when this object's value is true(1), the arubaWiredRpvstOperEdgePort can be false(2) if a BPDU has been received.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstPortAdminPointToPoint 1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.3
Refer the PointToPoint textual-convention.
Status: current Access: read-write
OBJECT-TYPE    
  PointToPoint  

arubaWiredRpvstPortAutoEdge 1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.4
It is used by the Bridge detection state machine for the automatic identification of edge ports.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstPortBpduFiltering 1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.5
This value indicates whether or not BPDUs need to be filtered on this port and BPDU filter option forces a port to always stay in the forwarding state and be excluded from standard STP operation. If the value is true(1) the received BPDUs will be dropped and no BPDUs will be transmitted on the port. If the value is false (2) the BPDUs will be processed as usual.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstPortRestrictedTcn 1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.6
This value indicates whether or not to propagate topology changes to other ports. true(1) causes the port not to propagate topology changes to other ports.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstPortRootGuard 1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.7
Setting this object to true(1) forces port to not to be selected as root port even if this port has the least path cost to the root.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstPortLoopGuard 1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.8
Setting this object to true(1) causes the non-designated port to go into the STP loop inconsistent state instead of the forwarding state. In the loop-inconsistent state, the port prevents data traffic through the link, therefore avoiding the loop creation. When BPDUs again are received on the inconsistent port, it resumes normal STP operation automatically.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstPortBpduProtection 1.3.6.1.4.1.47196.4.1.1.3.5.1.3.1.9
Setting this true (1) indicates that no BPDUs are expected to be received on this port. At the reception of BPDUs the BPDU protection mechanism will disable this port and port will transition into BPDU Error state.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstPortVlanTable 1.3.6.1.4.1.47196.4.1.1.3.5.1.4
Information describing the RPVST configuration and statistics of the ports in the given VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArubaWiredRpvstPortVlanEntry

arubaWiredRpvstPortVlanEntry 1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1
Information describing the RPVST configuration and statistics of the ports in the given VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  ArubaWiredRpvstPortVlanEntry  

arubaWiredRpvstPortVlanId 1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.1
A VLAN ID to uniquely identify the entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanIndex  

arubaWiredRpvstPortVlanIndex 1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.2
The port ifIndex
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

arubaWiredRpvstPortVlanPathCost 1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.3
The contribution of this port to the path cost of paths towards the root which include this port. auto(0)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..200000000  

arubaWiredRpvstPortVlanPriority 1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.4
The value of the port priority field that is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

arubaWiredRpvstPortVlanResetCounters 1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.5
Setting this object to true(1) will reset the RPVST counters for this port-vlan pair. Get on this object will always return false(2)
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstPortVlanRole 1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.6
Role played by the port in a given VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER root(1), alternate(2), designated(3), backup(4), master(5), disabled(6)  

arubaWiredRpvstPortVlanState 1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.7
The port's current state. This state controls what action a port takes on reception of a frame.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6), bpduError(7), loopInconsistent(8), pvidInconsistent(9), rootGuard(10)  

arubaWiredRpvstPortVlanDesigBridge 1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.8
The Bridge Identifier of the bridge that this port considers to be the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

arubaWiredRpvstPortVlanOperPointToPoint 1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.9
true : This value indicates that the MAC is connected to a point-to-point LAN segment; i.e., there is at most one other system attached to the LAN segment. false: This value indicates that the MAC is connected to a non-point-to-point LAN segment; i.e., there can be more than one other system attached to the LAN segment.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstPortVlanOperEdge 1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.10
The operational status of the edge port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

arubaWiredRpvstPortVlanInconsistencyReason 1.3.6.1.4.1.47196.4.1.1.3.5.1.4.1.11
The reason for which port is blocked by spanning tree protection function.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER rootProtected(1), loopProtected(2), inconsistentPvidProtected(3)  

arubaWiredRpvstNotificationTable 1.3.6.1.4.1.47196.4.1.1.3.5.1.5
Information describing the Rpvst configuration and statistics of the Ports and Vlans.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArubaWiredRpvstNotificationEntry

arubaWiredRpvstNotificationEntry 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1
Information describing the Rpvst events for trap generation.
Status: current Access: not-accessible
OBJECT-TYPE    
  ArubaWiredRpvstNotificationEntry  

arubaWiredRpvstPortName 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.1
Port name
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString Size(0..20)  

arubaWiredRpvstVlanIndex 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.2
VLAN ID
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 0..4097  

arubaWiredRpvstPortVlanErrantBpduRxCount 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.3
The number of BPDUs received on a BPDU-filtering or BPDU-protected enabled port.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 0..2147483647  

arubaWiredRpvstErrantBpduSrcMac 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.4
The source MAC address of the port sending Errant BPDU.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

arubaWiredRpvstSuperiorBpduSrcPort 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.5
The name of the port sending superior BPDU
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString Size(0..20)  

arubaWiredRpvstSuperiorBpduSrcMac 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.6
The MacAddress of the port sending superior BPDU
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress  

arubaWiredRpvstErrantBpduDetector 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.7
The identifier of the feature generating Errant BPDU trap.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER bpduFilter(1), bpduProtection(2)  

arubaWiredRpvstDesignatedPort 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.8
Designated Port of the Bridge.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString Size(0..20)  

arubaWiredRpvstOldPortRole 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.9
Old Port state
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString Size(0..20)  

arubaWiredRpvstNewPortRole 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.10
new port state
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString Size(0..20)  

arubaWiredRpvstTopoChangeTime 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.11
Topology change time
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DateAndTime  

arubaWiredRpvstPreviousRootBridgeID 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.12
Bridge ID of the previous Root. Bridge Id consists of priority and MAC address.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString Size(0..20)  

arubaWiredRpvstNewRootBridgeID 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.13
Bridge ID of the new Root. Bridge Id consists of priority and MAC address.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString Size(0..20)  

arubaWiredRpvstRootBridgeChangeTimeStamp 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.14
Time when the root changed
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DateAndTime  

arubaWiredRpvstId 1.3.6.1.4.1.47196.4.1.1.3.5.1.5.1.15
VLAN ID
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4097  

arubaWiredRpvstErrantBpduReceived 1.3.6.1.4.1.47196.4.1.1.3.5.0.1
This Trap is generated when an unexpected (errant) BPDU has been received on a port.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

arubaWiredRpvstNewRoot 1.3.6.1.4.1.47196.4.1.1.3.5.0.2
Trap generated when sending agent has become the new root of spanning Tree for the specified VLAN; the notification is sent by a bridge soon after its election as the new root.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

arubaWiredRpvstRootGuardInconsistency 1.3.6.1.4.1.47196.4.1.1.3.5.0.3
Trap generated when a Root Guard feature enabled port receives superior BPDUs on its interface for a given instance.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

arubaWiredRpvstLoopGuardInconsistency 1.3.6.1.4.1.47196.4.1.1.3.5.0.4
Trap generated when a Loop Guard feature enabled port receives superior BPDUs on its interface for a given instance.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

arubaWiredRpvstTopologyChange 1.3.6.1.4.1.47196.4.1.1.3.5.0.5
Trap is generated when a Topology Change is detected in the specified VLAN.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

arubaWiredRpvstGroups 1.3.6.1.4.1.47196.4.1.1.3.5.2.1
OBJECT IDENTIFIER    

arubaWiredRpvstCompliances 1.3.6.1.4.1.47196.4.1.1.3.5.2.2
OBJECT IDENTIFIER    

arubaWiredRpvstCompliance1 1.3.6.1.4.1.47196.4.1.1.3.5.2.2.1
The compliance statement
Status: current Access: not-accessible
MODULE-COMPLIANCE    

arubaWiredRpvstCompliance2 1.3.6.1.4.1.47196.4.1.1.3.5.2.2.2
The compliance statement
Status: current Access: not-accessible
MODULE-COMPLIANCE    

arubaWiredRpvstNotificationCompliance 1.3.6.1.4.1.47196.4.1.1.3.5.2.2.3
The compliance statement for Rpvst extension notifications.
Status: current Access: not-accessible
MODULE-COMPLIANCE    

arubaWiredRpvstGroup 1.3.6.1.4.1.47196.4.1.1.3.5.2.1.1
These objects are used for managing/monitoring RPVST global parameters.
Status: current Access: not-accessible
OBJECT-GROUP    

arubaWiredRpvstVlanGroup 1.3.6.1.4.1.47196.4.1.1.3.5.2.1.2
These objects are used for managing/monitoring RPVST VLAN parameters.
Status: current Access: not-accessible
OBJECT-GROUP    

arubaWiredRpvstPortVlanGroup 1.3.6.1.4.1.47196.4.1.1.3.5.2.1.3
These objects are used for managing/monitoring RPVST port parameters for the VLANs.
Status: current Access: not-accessible
OBJECT-GROUP    

arubaWiredRpvstPortGroup 1.3.6.1.4.1.47196.4.1.1.3.5.2.1.4
These objects are used for managing/monitoring RPVST port parameters
Status: current Access: not-accessible
OBJECT-GROUP    

arubaWiredRpvstPvst1 1.3.6.1.4.1.47196.4.1.1.3.5.2.1.5
Group of object added part of pvst1.
Status: current Access: not-accessible
OBJECT-GROUP    

arubaWiredRpvstNotificationObjectGrp 1.3.6.1.4.1.47196.4.1.1.3.5.2.1.6
Group of objects required for notifications.
Status: current Access: not-accessible
OBJECT-GROUP    

arubaWiredRpvstNotificationGroup 1.3.6.1.4.1.47196.4.1.1.3.5.2.1.7
Group of notifications.
Status: current Access: not-accessible
NOTIFICATION-GROUP