ASCEND-MIBATMPORT-MIB

File: ASCEND-MIBATMPORT-MIB.mib (15517 bytes)

Imported modules

ASCEND-MIB

RFC1155-SMI

RFC-1212

Imported symbols

configuration

IpAddress

OBJECT-TYPE

Defined Types

DisplayString
OCTET STRING

MibatmIntfConfProfileEntry
SEQUENCE
	atmIntfConfProfile-Shelf-o	INTEGER
	atmIntfConfProfile-Slot-o	INTEGER
	atmIntfConfProfile-Item-o	INTEGER
	atmIntfConfProfile-LogicalItem-o	INTEGER
	atmIntfConfProfile-Address-PhysicalAddress-Shelf	INTEGER
	atmIntfConfProfile-Address-PhysicalAddress-Slot	INTEGER
	atmIntfConfProfile-Address-PhysicalAddress-ItemNumber	INTEGER
	atmIntfConfProfile-Address-LogicalItem	INTEGER
	atmIntfConfProfile-BaseConfig-MaxVpcs	INTEGER
	atmIntfConfProfile-BaseConfig-MaxVccs	INTEGER
	atmIntfConfProfile-BaseConfig-MaxActiveVpiBits	INTEGER
	atmIntfConfProfile-BaseConfig-MaxActiveVciBits	INTEGER
	atmIntfConfProfile-BaseConfig-IlmiVpi	INTEGER
	atmIntfConfProfile-BaseConfig-IlmiVci	INTEGER
	atmIntfConfProfile-BaseConfig-NeighborIpAddress	IpAddress
	atmIntfConfProfile-BaseConfig-NeighborName	DisplayString
	atmIntfConfProfile-BaseConfig-SubscAtmAddress	DisplayString
	atmIntfConfProfile-ExtensionConfig-ConfigType	INTEGER
	atmIntfConfProfile-ExtensionConfig-ConfigSide	INTEGER
	atmIntfConfProfile-ExtensionConfig-IlmiAdminStatus	INTEGER
	atmIntfConfProfile-ExtensionConfig-IlmiConnectivity	INTEGER
	atmIntfConfProfile-ExtensionConfig-ConnEstabInterval	INTEGER
	atmIntfConfProfile-ExtensionConfig-LossDetectInterval	INTEGER
	atmIntfConfProfile-ExtensionConfig-PollInactFactor	INTEGER
	atmIntfConfProfile-ExtensionConfig-DeviceType	INTEGER
	atmIntfConfProfile-ExtensionConfig-MaxSwitchedVpcVpi	INTEGER
	atmIntfConfProfile-ExtensionConfig-MaxSwitchedVccVpi	INTEGER
	atmIntfConfProfile-ExtensionConfig-MinSwitchedVccVci	INTEGER
	atmIntfConfProfile-ExtensionConfig-SigVccRxQosName	DisplayString
	atmIntfConfProfile-ExtensionConfig-SigVccTxQosName	DisplayString
	atmIntfConfProfile-ExtensionConfig-PvcFailureTrapEnabled	INTEGER
	atmIntfConfProfile-ExtensionConfig-PvcFailureIntvl	INTEGER
	atmIntfConfProfile-Action-o	INTEGER

Defined Values

mibatmIntfConfProfile		4.1.529.23.51
OBJECT IDENTIFIER

mibatmIntfConfProfileTable		4.1.529.23.51.1
A list of mibatmIntfConfProfile profile entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MibatmIntfConfProfileEntry

mibatmIntfConfProfileEntry		4.1.529.23.51.1.1
A mibatmIntfConfProfile entry containing objects that maps to the parameters of mibatmIntfConfProfile profile.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MibatmIntfConfProfileEntry

atmIntfConfProfile-Shelf-o		4.1.529.23.51.1.1.1
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-Slot-o		4.1.529.23.51.1.1.2
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-Item-o		4.1.529.23.51.1.1.3
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-LogicalItem-o		4.1.529.23.51.1.1.4
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-Address-PhysicalAddress-Shelf		4.1.529.23.51.1.1.5
The number of the shelf that the addressed physical device resides on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)

atmIntfConfProfile-Address-PhysicalAddress-Slot		4.1.529.23.51.1.1.6
The number of the slot that the addressed physical device resides on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)

atmIntfConfProfile-Address-PhysicalAddress-ItemNumber		4.1.529.23.51.1.1.7
A number that specifies an addressable entity within the context of shelf and slot.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-Address-LogicalItem		4.1.529.23.51.1.1.8
A number that specifies an addressable logical entity within the context of a physical address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-BaseConfig-MaxVpcs		4.1.529.23.51.1.1.9
The maximum number of VPCs (PVPCs/SVPCs) supported at this ATM interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-BaseConfig-MaxVccs		4.1.529.23.51.1.1.10
The maximum number of VCCs (PVCCs/SVCCs) supported at this ATM interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-BaseConfig-MaxActiveVpiBits		4.1.529.23.51.1.1.11
The maximum number of active VPI bits configured for use at this ATM interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-BaseConfig-MaxActiveVciBits		4.1.529.23.51.1.1.12
The maximum number of active VCI bits configured for use at this ATM interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-BaseConfig-IlmiVpi		4.1.529.23.51.1.1.13
The VPI value of the ILMI VCC at this ATM interface. If ilmi-vpi and ilmi-vci are both zero ILMI is not supported at this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-BaseConfig-IlmiVci		4.1.529.23.51.1.1.14
The VCI value of the ILMI VCC at this ATM interface. If ilmi-vpi and ilmi-vci are both zero ILMI is not supported at this interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-BaseConfig-NeighborIpAddress		4.1.529.23.51.1.1.15
The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

atmIntfConfProfile-BaseConfig-NeighborName		4.1.529.23.51.1.1.16
The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

atmIntfConfProfile-BaseConfig-SubscAtmAddress		4.1.529.23.51.1.1.17
The identifier assigned by a service provider to the network side of public network UNI. If this interface has no assigned service provider address, then atmInterfaceSubscrAddress is an octet string of zero length.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

atmIntfConfProfile-ExtensionConfig-ConfigType		4.1.529.23.51.1.1.18
The type of connection setup procedures configured for the ATM interface. Setting this variable to a value of 'other' is not allowed. Default value: autoConfig.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	atmfAutoConfig(3), atmfPnni1dot0(11), atmfUniPvcOnly(13)

atmIntfConfProfile-ExtensionConfig-ConfigSide		4.1.529.23.51.1.1.19
The configured role of the managed entity as one side of the ATM interface. This value does not apply when the object atmIntfConfigType is set to `autoConfig',`atmfPnni1Dot0', or `atmfBici2Dot0'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(2), user(3), network(4)

atmIntfConfProfile-ExtensionConfig-IlmiAdminStatus		4.1.529.23.51.1.1.20
Following ILMI components will be enabled on this port only if ilmi-admin-status is set to YES - ilmiAddressRegistration, - ilmiConnectivity, - ilmiPvcPvpMgmt, - ilmiSigVccParamNegotiation
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

atmIntfConfProfile-ExtensionConfig-IlmiConnectivity		4.1.529.23.51.1.1.33
ILMI Connectivity enabled on this port if set to YES
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

atmIntfConfProfile-ExtensionConfig-ConnEstabInterval		4.1.529.23.51.1.1.21
The amount of time S (in seconds ) between successive transmissions of ILMI messages on this interface for the purpose of detecting establishment of ILMI connectivity.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-ExtensionConfig-LossDetectInterval		4.1.529.23.51.1.1.22
The amount of time T ( in seconds ) between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The distinguished value zero disables ILMI connectivity procedures on this interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-ExtensionConfig-PollInactFactor		4.1.529.23.51.1.1.23
The number K of consecutive polls on this interface for which no ILMI response message is received before ILMI connectivity is declared lost.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-ExtensionConfig-DeviceType		4.1.529.23.51.1.1.24
Specifies whether this end of the interface is advertised in ILMI as a device of the `public' or `private' type.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(2), public(3), private(4)

atmIntfConfProfile-ExtensionConfig-MaxSwitchedVpcVpi		4.1.529.23.51.1.1.25
The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual path connections.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-ExtensionConfig-MaxSwitchedVccVpi		4.1.529.23.51.1.1.26
The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual channel connections.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-ExtensionConfig-MinSwitchedVccVci		4.1.529.23.51.1.1.27
The minimum VCI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual channel connections.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-ExtensionConfig-SigVccRxQosName		4.1.529.23.51.1.1.28
The signalling VCC QOS parameters for the receive direction.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

atmIntfConfProfile-ExtensionConfig-SigVccTxQosName		4.1.529.23.51.1.1.29
The signalling VCC QOS parameters for the transmit direction.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

atmIntfConfProfile-ExtensionConfig-PvcFailureTrapEnabled		4.1.529.23.51.1.1.30
Allows the generation of traps in response to PVCL or PVPL failures on this interface. Default = FALSE
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

atmIntfConfProfile-ExtensionConfig-PvcFailureIntvl		4.1.529.23.51.1.1.31
The minimum interval between the sending of atmIntfPvcFailuresTrap notifications for this interface, Default = 30 seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfConfProfile-Action-o		4.1.529.23.51.1.1.32
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	noAction(1), createProfile(2), deleteProfile(3)