ASCEND-MIBATMSIG-MIB

File: ASCEND-MIBATMSIG-MIB.mib (17033 bytes)

Imported modules

ASCEND-MIB

RFC1155-SMI

RFC-1212

Imported symbols

configuration

IpAddress

OBJECT-TYPE

Defined Types

DisplayString
OCTET STRING

MibatmIntfSigParamsEntry
SEQUENCE
	atmIntfSigParams-Shelf-o	INTEGER
	atmIntfSigParams-Slot-o	INTEGER
	atmIntfSigParams-Item-o	INTEGER
	atmIntfSigParams-LogicalItem-o	INTEGER
	atmIntfSigParams-Address-PhysicalAddress-Shelf	INTEGER
	atmIntfSigParams-Address-PhysicalAddress-Slot	INTEGER
	atmIntfSigParams-Address-PhysicalAddress-ItemNumber	INTEGER
	atmIntfSigParams-Address-LogicalItem	INTEGER
	atmIntfSigParams-Q2931Options-MaxRestart	INTEGER
	atmIntfSigParams-Q2931Options-MaxStatenq	INTEGER
	atmIntfSigParams-Q2931Options-T301Ms	INTEGER
	atmIntfSigParams-Q2931Options-T303Ms	INTEGER
	atmIntfSigParams-Q2931Options-T306Ms	INTEGER
	atmIntfSigParams-Q2931Options-T308Ms	INTEGER
	atmIntfSigParams-Q2931Options-T309Ms	INTEGER
	atmIntfSigParams-Q2931Options-T310Ms	INTEGER
	atmIntfSigParams-Q2931Options-T313Ms	INTEGER
	atmIntfSigParams-Q2931Options-T316Ms	INTEGER
	atmIntfSigParams-Q2931Options-T317Ms	INTEGER
	atmIntfSigParams-Q2931Options-T322Ms	INTEGER
	atmIntfSigParams-Q2931Options-T331Ms	INTEGER
	atmIntfSigParams-Q2931Options-T333Ms	INTEGER
	atmIntfSigParams-Q2931Options-T397Ms	INTEGER
	atmIntfSigParams-Q2931Options-T398Ms	INTEGER
	atmIntfSigParams-Q2931Options-T399Ms	INTEGER
	atmIntfSigParams-Q2931Options-SaalRetryMs	INTEGER
	atmIntfSigParams-Q2931Options-T303NumReties	INTEGER
	atmIntfSigParams-Q2931Options-T308NumRetries	INTEGER
	atmIntfSigParams-Q2931Options-T316NumRetries	INTEGER
	atmIntfSigParams-Q2931Options-T322NumRetries	INTEGER
	atmIntfSigParams-Q2931Options-T331NumRetries	INTEGER
	atmIntfSigParams-Q2931Options-AssignVpiVci	INTEGER
	atmIntfSigParams-QsaalOptions-WindowSize	INTEGER
	atmIntfSigParams-QsaalOptions-MaxCc	INTEGER
	atmIntfSigParams-QsaalOptions-MaxPd	INTEGER
	atmIntfSigParams-QsaalOptions-MaxStat	INTEGER
	atmIntfSigParams-QsaalOptions-TccMs	INTEGER
	atmIntfSigParams-QsaalOptions-TpollMs	INTEGER
	atmIntfSigParams-QsaalOptions-TkeepaliveMs	INTEGER
	atmIntfSigParams-QsaalOptions-TnoresponseMs	INTEGER
	atmIntfSigParams-QsaalOptions-TidleMs	INTEGER
	atmIntfSigParams-QsaalOptions-PollAfterRetransmission	INTEGER
	atmIntfSigParams-QsaalOptions-RepeatUstat	INTEGER
	atmIntfSigParams-QsaalOptions-UstatRspToPoll	INTEGER
	atmIntfSigParams-Action-o	INTEGER

Defined Values

mibatmIntfSigParams		1.3.6.1.4.1.529.23.52
OBJECT IDENTIFIER

mibatmIntfSigParamsTable		1.3.6.1.4.1.529.23.52.1
A list of mibatmIntfSigParams profile entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MibatmIntfSigParamsEntry

mibatmIntfSigParamsEntry		1.3.6.1.4.1.529.23.52.1.1
A mibatmIntfSigParams entry containing objects that maps to the parameters of mibatmIntfSigParams profile.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MibatmIntfSigParamsEntry

atmIntfSigParams-Shelf-o		1.3.6.1.4.1.529.23.52.1.1.1
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Slot-o		1.3.6.1.4.1.529.23.52.1.1.2
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Item-o		1.3.6.1.4.1.529.23.52.1.1.3
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIntfSigParams-LogicalItem-o		1.3.6.1.4.1.529.23.52.1.1.4
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Address-PhysicalAddress-Shelf		1.3.6.1.4.1.529.23.52.1.1.5
The number of the shelf that the addressed physical device resides on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)

atmIntfSigParams-Address-PhysicalAddress-Slot		1.3.6.1.4.1.529.23.52.1.1.6
The number of the slot that the addressed physical device resides on.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)

atmIntfSigParams-Address-PhysicalAddress-ItemNumber		1.3.6.1.4.1.529.23.52.1.1.7
A number that specifies an addressable entity within the context of shelf and slot.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Address-LogicalItem		1.3.6.1.4.1.529.23.52.1.1.8
A number that specifies an addressable logical entity within the context of a physical address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-MaxRestart		1.3.6.1.4.1.529.23.52.1.1.9
Maximum number of unacknowledged tx RESTART.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-MaxStatenq		1.3.6.1.4.1.529.23.52.1.1.10
Maximum number of unacknowledged tx STATUS ENQ.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T301Ms		1.3.6.1.4.1.529.23.52.1.1.11
Timer (in msec) for alerting supervision function. This timer is started on receipt of ALERT in Call received/delivered state and stopped when CONNECT is received.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T303Ms		1.3.6.1.4.1.529.23.52.1.1.12
Timer (in msec) for a response after SETUP is sent. This timer is stopped when the CONNECT, CALL PROCEEDING, or RELEASE COMPLETE is received.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T306Ms		1.3.6.1.4.1.529.23.52.1.1.13
Timer (in msec) for a RELEASE_COMPLETE to be received after a release has been sent.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T308Ms		1.3.6.1.4.1.529.23.52.1.1.14
Timer (in msec) for a response after RELEASE is sent. This is a release indication timer. This timer is started when the RELEASE message is sent and normally is stopped when the RELEASE or RELEASE COMPLETE is received.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T309Ms		1.3.6.1.4.1.529.23.52.1.1.15
Timer (in msec) for Q.SAAL to reconnect. After this time, calls are dropped. When set to 0, a default value based on an ATM signaling protocol will be used.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T310Ms		1.3.6.1.4.1.529.23.52.1.1.16
Timer (in msec) for a response after SETUP is received. Also called the CALL PROCEEDING timer.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T313Ms		1.3.6.1.4.1.529.23.52.1.1.17
Timer (in msec) for a response after CONNECT is sent. Also called the connect request timer. It is started when the CONNECT is sent and stopped when the CONNECT ACKNOWLEDGE is recieved.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T316Ms		1.3.6.1.4.1.529.23.52.1.1.18
Timer (in msec) for a response after RESTART is sent. Also called the restart request timer. It is started when the RESTART is sent and stopped when the RESTART ACKNOWLEDGE is recieved.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T317Ms		1.3.6.1.4.1.529.23.52.1.1.19
Timer (in msec) for internal clearing of call references. This timer is started as a result of a restart and cleared when all the internal call references are cleared. Should be less than the the likely value of T316 of the peer.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T322Ms		1.3.6.1.4.1.529.23.52.1.1.20
Timer (in msec) for a response after STATUS ENQ is sent.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T331Ms		1.3.6.1.4.1.529.23.52.1.1.21
Timer (in msec) for internal clearing of call references.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T333Ms		1.3.6.1.4.1.529.23.52.1.1.22
Timer (in msec) for internal clearing of call references.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T397Ms		1.3.6.1.4.1.529.23.52.1.1.23
Timer (in msec) for internal clearing of call references.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T398Ms		1.3.6.1.4.1.529.23.52.1.1.24
Timer (in msec) for receipt of a response to a DROP PARTY that was sent.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T399Ms		1.3.6.1.4.1.529.23.52.1.1.25
Timer (in msec) for receipt of a response to an ADD PARTY that was sent.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-SaalRetryMs		1.3.6.1.4.1.529.23.52.1.1.26
Timer value for retrying AAL_ESTABLISH messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T303NumReties		1.3.6.1.4.1.529.23.52.1.1.27
Number of times SETUP could be resent in case of T303 timer expiry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T308NumRetries		1.3.6.1.4.1.529.23.52.1.1.28
Number of times RELEASE could be sent in case of T308 timer expiry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T316NumRetries		1.3.6.1.4.1.529.23.52.1.1.29
Number of times RESTART could be sent in case RESTART ACK is not received withinn T316 timer expiry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T322NumRetries		1.3.6.1.4.1.529.23.52.1.1.30
Number of times STAT ENQ could be sent before a response is received within the T322 timer expiry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-T331NumRetries		1.3.6.1.4.1.529.23.52.1.1.31
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-Q2931Options-AssignVpiVci		1.3.6.1.4.1.529.23.52.1.1.32
In the case of UNI4.0 and PNNI this parameter specifies who assigns the VPI/VCI. TRUE will allow the local stack and FALSE will let the partner stack to assign.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

atmIntfSigParams-QsaalOptions-WindowSize		1.3.6.1.4.1.529.23.52.1.1.33
Q.SAAL window size
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-QsaalOptions-MaxCc		1.3.6.1.4.1.529.23.52.1.1.34
Maximum number of control PDU (BGN, END, RESYNC) retransmissions.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-QsaalOptions-MaxPd		1.3.6.1.4.1.529.23.52.1.1.35
Maximum number of Sequenced data PDU's between poll.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-QsaalOptions-MaxStat		1.3.6.1.4.1.529.23.52.1.1.36
Maximum length of STAT PDU.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-QsaalOptions-TccMs		1.3.6.1.4.1.529.23.52.1.1.37
Retry time (in msec) for control PDU's(BGN, END, RESYNC).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-QsaalOptions-TpollMs		1.3.6.1.4.1.529.23.52.1.1.38
Poll sent (in msec) when active. When set to 0, a default value based on an ATM signaling protocol will be used.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-QsaalOptions-TkeepaliveMs		1.3.6.1.4.1.529.23.52.1.1.39
Poll sent (in msec) when in transient state. When set to 0, a default value based on an ATM signaling protocol will be used.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-QsaalOptions-TnoresponseMs		1.3.6.1.4.1.529.23.52.1.1.40
STAT received at least this period(in msec). When set to 0, a default value based on an ATM signaling protocol will be used.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-QsaalOptions-TidleMs		1.3.6.1.4.1.529.23.52.1.1.41
Poll sent (in msec) when idle -- UNI 3.1, only.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIntfSigParams-QsaalOptions-PollAfterRetransmission		1.3.6.1.4.1.529.23.52.1.1.42
Specifies after retransmitting PDUs whether a POLL must be sent before sending any further PDUs.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

atmIntfSigParams-QsaalOptions-RepeatUstat		1.3.6.1.4.1.529.23.52.1.1.43
Specifies whether two USTAT messages should be sent each time it is required to be sent.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

atmIntfSigParams-QsaalOptions-UstatRspToPoll		1.3.6.1.4.1.529.23.52.1.1.44
Specifies whether a USTAT should be sent in response to a POLL indicating an out of sequence PDU.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

atmIntfSigParams-Action-o		1.3.6.1.4.1.529.23.52.1.1.45
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	noAction(1), createProfile(2), deleteProfile(3)