ASM-PRIVATE-COMMIB

File: ASM-PRIVATE-COMMIB.mib (228348 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

Counter Gauge enterprises
IpAddress DisplayString OBJECT-TYPE

Defined Types

DisketteDrvIndex  
INTEGER a(1), b(2)    

DisketteDriveEntry  
SEQUENCE    
  disketteDrvIndex DisketteDrvIndex
  disketteDrvType INTEGER 0..5

HdControllerEntry  
SEQUENCE    
  hdCntrlNum INTEGER
  hdCntrlSlotNum INTEGER 1..12
  hdCntrlType INTEGER
  hdCntrlIoPort INTEGER
  hdCntrlIntr INTEGER 0..15
  hdCntrlDMA INTEGER 0..7
  hdCntrlModel DisplayString

DiskEntry  
SEQUENCE    
  diskNum INTEGER
  diskHdCntrlNum INTEGER
  diskHdCntrlSlotNum INTEGER 1..12
  diskId INTEGER 0..7
  diskSize INTEGER
  diskModel DisplayString
  diskType OCTET STRING Size(4)
  diskBusyRatio INTEGER
  averageDiskReadWriteTime INTEGER
  numberOfDiskTransfer INTEGER
  byteOfDiskTransfer INTEGER

NicControllerEntry  
SEQUENCE    
  nicCntrlNum INTEGER
  nicCntrlSlotNum INTEGER
  nicCntrlIoPort INTEGER
  nicCntrlDMA INTEGER 0..7
  nicCntrlIntr INTEGER 0..15
  nicCntrlSharedMem INTEGER
  nicCntrlModel DisplayString
  nicCntrlType DisplayString
  nicMACAddress DisplayString
  nicMediaType INTEGER
  nicInterfaceSpeed INTEGER

NWNicGenericCounter  
SEQUENCE    
  nwNicNumRcvPkts Gauge
  nwNicNumRcvBytes Gauge
  nwNicNumSndPkts Gauge
  nwNicNumSndBytes Gauge
  nwNicNoEcbCount Counter
  nwNicSndTooBigCnt Counter
  nwNicRcvPktOvlCnt Counter
  nwNicRcvPktTooBigCnt Counter
  nwNicRcvPktTooSmallCnt Counter
  nwNicRcvPktMiscErr Counter
  nwNicSndPktMiscErr Counter
  nwNicSndPktRetryCnt Counter
  nwNicChkSumErr Counter
  nwNicRcvMismatchCnt Counter
  nwNicAdapterRstCnt Counter

NWNicGenericThreshold  
SEQUENCE    
  nwNicNumRcvPktsThreshold INTEGER
  nwNicNumRcvBytesThreshold INTEGER
  nwNicNumSndPktsThreshold INTEGER
  nwNicNumSndBytesThreshold INTEGER
  nwNicNoEcbCountThreshold INTEGER
  nwNicSndTooBigCntThreshold INTEGER
  nwNicRcvPktOvlCntThreshold INTEGER
  nwNicRcvPktTooBigCntThreshold INTEGER
  nwNicRcvPktTooSmallCntThreshold INTEGER
  nwNicRcvPktMiscErrThreshold INTEGER
  nwNicSndPktMiscErrThreshold INTEGER
  nwNicSndPktRetryCntThreshold INTEGER
  nwNicChkSumErrThreshold INTEGER
  nwNicRcvMismatchCntThreshold INTEGER
  nwNicAdapterRstCntThreshold INTEGER

NWNicEthernetCounter  
SEQUENCE    
  nwNicSndOkSingleColliCnt Counter
  nwNicSndOkMultipleColliCnt Counter
  nwNicSndOkButDeferred Counter
  nwNicSndAbortLateColli Counter
  nwNicSndAbortExcessColli Counter
  nwNicSndAbortCarrierSense Counter
  nwNicSndAbortExcessDefer Counter
  nwNicRcvAbortFrameAlignment Counter

NWNicEthernetThreshold  
SEQUENCE    
  nwNicSndOkSingleColliCntThreshold INTEGER
  nwNicSndOkMultipleColliCntThreshold INTEGER
  nwNicSndOkButDeferredThreshold INTEGER
  nwNicSndAbortLateColliThreshold INTEGER
  nwNicSndAbortExcessColliThreshold INTEGER
  nwNicSndAbortCarrierSenseThreshold INTEGER
  nwNicSndAbortExcessDeferThreshold INTEGER
  nwNicRcvAbortFrameAlignmentThreshold INTEGER

NWNicTokenRingCounter  
SEQUENCE    
  nwNicACErrorCounter Counter
  nwNicAbortDelimiterCounter Counter
  nwNicBurstErrorCounter Counter
  nwNicFrameCopiedErrorCounter Counter
  nwNicFrequencyErrorCounter Counter
  nwNicInternalErrorCounter Counter
  nwNicLastRingStatus Counter
  nwNicLineErrorCounter Counter
  nwNicLostFrameCounter Counter
  nwNicTokenErrorCounter Counter

NWNicTokenRingThreshold  
SEQUENCE    
  nwNicACErrorCounterThreshold INTEGER
  nwNicAbortDelimiterCounterThreshold INTEGER
  nwNicBurstErrorCounterThreshold INTEGER
  nwNicFrameCopiedErrorCounterThreshold INTEGER
  nwNicFrequencyErrorCounterThreshold INTEGER
  nwNicInternalErrorCounterThreshold INTEGER
  nwNicLastRingStatusThreshold INTEGER
  nwNicLineErrorCounterThreshold INTEGER
  nwNicLostFrameCounterThreshold INTEGER
  nwNicTokenErrorCounterThreshold INTEGER

NTNicGenericCounter  
SEQUENCE    
  ntNicCntFrameXmitOk Counter
  ntNicCntFrameRcvOk Counter
  ntNicCntFrameXmitErr Counter
  ntNicCntFrameRcvErr Counter
  ntNicCntRcvFailNoBuf Counter
  ntNicCntDirByteXmit Counter
  ntNicCntDirPktXmit Counter
  ntNicCntMulCastByteXmit Counter
  ntNicCntMulCastPktXmit Counter
  ntNicCntBrdCastByteXmit Counter
  ntNicCntBrdCastPktXmit Counter
  ntNicCntDirByteRcv Counter
  ntNicCntDirPktRcv Counter
  ntNicCntMulCastByteRcv Counter
  ntNicCntMulCastPktRcv Counter
  ntNicCntBrdCastByteRcv Counter
  ntNicCntBrdCastPktRcv Counter
  ntNicCntFrameRcvCRCErr Counter
  ntNicXmitQueueLength INTEGER

NTNicGenericThreshold  
SEQUENCE    
  ntNicTldFrameXmitOk INTEGER
  ntNicTldFrameRcvOk INTEGER
  ntNicTldFrameXmitErr INTEGER
  ntNicTldFrameRcvErr INTEGER
  ntNicTldRcvFailNoBuf INTEGER
  ntNicTldDirByteXmit INTEGER
  ntNicTldDirPktXmit INTEGER
  ntNicTldMulCastByteXmit INTEGER
  ntNicTldMulCastPktXmit INTEGER
  ntNicTldBrdCastByteXmit INTEGER
  ntNicTldBrdCastPktXmit INTEGER
  ntNicTldDirByteRcv INTEGER
  ntNicTldDirPktRcv INTEGER
  ntNicTldMulCastByteRcv INTEGER
  ntNicTldMulCastPktRcv INTEGER
  ntNicTldBrdCastByteRcv INTEGER
  ntNicTldBrdCastPktRcv INTEGER
  ntNicTldFrameRcvCRCErr INTEGER
  ntNicTldXmitQueueLength INTEGER

NTNicEthernetCounter  
SEQUENCE    
  ntNicCntRcvFrameAlignErr Counter
  ntNicCntXmitOkOneCollision Counter
  ntNicCntXmitOkMoreCollision Counter
  ntNicCntXmitOkDeffered Counter
  ntNicCntXmitFailMaxCollision Counter
  ntNicCntRcvErrOverrun Counter
  ntNicCntXmitErrUnderrun Counter
  ntNicCntXmitHeartbeat Counter
  ntNicCntTimesCRSLost Counter
  ntNicCntXmitLateCollision Counter

NTNicEthernetThreshold  
SEQUENCE    
  ntNicTldRcvFrameAlignErr INTEGER
  ntNicTldXmitOkOneCollision INTEGER
  ntNicTldXmitOkMoreCollision INTEGER
  ntNicTldXmitOkDeffered INTEGER
  ntNicTldXmitFailMaxCollision INTEGER
  ntNicTldRcvErrOverrun INTEGER
  ntNicTldXmitErrUnderrun INTEGER
  ntNicTldXmitHeartbeat INTEGER
  ntNicTldTimesCRSLost INTEGER
  ntNicTldXmitLateCollision INTEGER

NTNicTokenRingCounter  
SEQUENCE    
  ntNicCntACError Counter
  ntNicCntAbortDelimiter Counter
  ntNicCntBurstError Counter
  ntNicCntFrameCopiedError Counter
  ntNicCntFrequencyError Counter
  ntNicCntInternalError Counter
  ntNicCntLastRingStatus INTEGER
  ntNicCntLineError Counter
  ntNicCntLostFrame Counter
  ntNicCntTokenError Counter

NTNicTokenRingThreshold  
SEQUENCE    
  ntNicTldACError INTEGER
  ntNicTldAbortDelimiter INTEGER
  ntNicTldBurstError INTEGER
  ntNicTldFrameCopiedError INTEGER
  ntNicTldFrequencyError INTEGER
  ntNicTldInternalError INTEGER
  ntNicTldLastRingStatus INTEGER
  ntNicTldLineError INTEGER
  ntNicTldLostFrame INTEGER
  ntNicTldTokenError INTEGER

SCONicGenericCounter  
SEQUENCE    
  scoNicNumRcvPkts Gauge
  scoNicNumRcvBytes Gauge
  scoNicNumSndPkts Gauge
  scoNicNumSndBytes Gauge
  scoNicFrameDef Counter
  scoNicCollisions Counter
  scoNicFrameColl Counter
  scoNicOFrameColl Counter
  scoNicXsColl Counter
  scoNicFrameNosr Counter
  scoNicNoResource Counter
  scoNicBadSum Counter
  scoNicAlign Counter
  scoNicBadLen Counter
  scoNicBadSap Counter
  scoNicMcastRjct Counter
  scoNicCarrier Counter
  scoNicBadCts Counter
  scoNicBadDma Counter
  scoNicTimeOuts Counter

SCONicGenericThreshold  
SEQUENCE    
  scoNicNumRcvPktsThreshold INTEGER
  scoNicNumRcvBytesThreshold INTEGER
  scoNicNumSndPktsThreshold INTEGER
  scoNicNumSndBytesThreshold INTEGER
  scoNicFrameDefThreshold INTEGER
  scoNicCollisionsThreshold INTEGER
  scoNicFrameCollThreshold INTEGER
  scoNicOFrameCollThreshold INTEGER
  scoNicXsCollThreshold INTEGER
  scoNicFrameNosrThreshold INTEGER
  scoNicNoResourceThreshold INTEGER
  scoNicBadSumThreshold INTEGER
  scoNicAlignThreshold INTEGER
  scoNicBadLenThreshold INTEGER
  scoNicBadSapThreshold INTEGER
  scoNicMcastRjctThreshold INTEGER
  scoNicCarrierThreshold INTEGER
  scoNicBadCtsThreshold INTEGER
  scoNicBadDmaThreshold INTEGER
  scoNicTimeOutsThreshold INTEGER

SysFSEntry  
SEQUENCE    
  sysFSNumber INTEGER
  sysFSName DisplayString
  totalFSSize INTEGER
  freeFSSize INTEGER
  usedFSSizeThreshold INTEGER
  totalFSinode INTEGER
  freeFSinode INTEGER
  sysFSType DisplayString
  sysFSMountTime DisplayString

SystemIrqsInfoEntry  
SEQUENCE    
  irqNumber INTEGER 0..15
  irqOccupiedDes DisplayString

SystemDmasInfoEntry  
SEQUENCE    
  dmaChannel INTEGER 0..7
  dmaOccupiedDes DisplayString

SystemIoPortsInfoEntry  
SEQUENCE    
  ioPortsIndex INTEGER
  ioPortsBeginValue INTEGER
  ioPortsEndValue INTEGER
  ioPortsOccupiedDes DisplayString

SlotsType  
INTEGER eisa(1), isa(3), pci(5)    

SystemSlotsInfoEntry  
SEQUENCE    
  slotsNumber INTEGER
  slotsType SlotsType
  slotsOccupiedDes DisplayString

MemoryEntry  
SEQUENCE    
  memSlots INTEGER 1..16
  simmType OCTET STRING Size(4)

SystemBaseMemInfoEntry  
SEQUENCE    
  baseMemIndex INTEGER
  baseMemAddr INTEGER
  baseMemLength INTEGER
  baseMemOccupiedDes DisplayString

ServerMgrContactInfoEntry  
SEQUENCE    
  serverMgrNumber INTEGER
  serverMgrName DisplayString
  serverMgrOffPhone DisplayString
  serverMgrOffAddr DisplayString
  serverMgrHomePhone DisplayString
  serverMgrHomeAddr DisplayString
  serverMgrPagerNum DisplayString
  serverMgrEmailAddr DisplayString

SysVolEntry  
SEQUENCE    
  sysVolNum INTEGER
  sysVolName DisplayString
  totalVolSize INTEGER
  freeVolSize INTEGER
  totalDirSize INTEGER
  freeDirSize INTEGER
  usedVolSizeThreshold INTEGER

SysPartitionEntry  
SEQUENCE    
  sysPartitionNum INTEGER
  partitionDiskNum INTEGER
  dataAreaSize INTEGER
  redirectionAreaSize INTEGER
  redirectedSize INTEGER
  partitionName DisplayString Size(0..64)

CpuInfo  
SEQUENCE    
  cpuNum INTEGER
  cpuUtilization INTEGER
  cpuSystemUtilization INTEGER
  cpuUserUtilization INTEGER
  cpuInterruptUtilization INTEGER

PiProcessorInfo  
SEQUENCE    
  piSocketDesignation DisplayString
  piProcessorType INTEGER
  piProcessorFamily INTEGER
  piProcessorManufacturer DisplayString
  piProcessorID OCTET STRING Size(8)
  piProcessorVersion DisplayString
  piVoltage INTEGER
  piExternalClock INTEGER
  piMaxSpeed INTEGER
  piCurrentSpeed INTEGER
  piStatus INTEGER
  piProcessorUpgrade INTEGER

MmMemoryModuleInfo  
SEQUENCE    
  mmSocketDesignation DisplayString
  mmBankConnections INTEGER
  mmCurrentSpeed INTEGER
  mmCurrentMemoryType INTEGER
  mmInstalledSize INTEGER
  mmEnabledSize INTEGER
  mmErrorStatus INTEGER

CiCacheInfo  
SEQUENCE    
  ciSocketDesignation DisplayString
  ciCacheConfiguration INTEGER
  ciMaximumCacheSize INTEGER
  ciInstalledSize INTEGER
  ciSupportedSRAMType INTEGER
  ciCurrentSRAMType INTEGER

PcPortConnectorInfo  
SEQUENCE    
  pcInternalReferenceDesignator DisplayString
  pcInternalConnectorType INTEGER
  pcExternalReferenceDesignator DisplayString
  pcExternalConnectorType INTEGER
  pcPortType INTEGER

SsSystemSlotInfo  
SEQUENCE    
  ssSlotDesignation DisplayString
  ssSlotType INTEGER
  ssSlotDataBusWidth INTEGER
  ssCurrentUsage INTEGER
  ssSlotLength INTEGER
  ssSlotID INTEGER
  ssSlotCharacteristics INTEGER

ObOnBoardDeviceInfo  
SEQUENCE    
  obDeviceType INTEGER
  obDescription DisplayString

OemStrings  
SEQUENCE    
  oemString DisplayString

SmEventLogEntry  
SEQUENCE    
  smLogTime DisplayString
  smLogType INTEGER
  smLogDescription DisplayString

IpAddresses  
SEQUENCE    
  ipAddress IpAddress

LoginUser  
SEQUENCE    
  loginUserName DisplayString
  loginTime DisplayString

DriverLoaded  
SEQUENCE    
  driverName DisplayString
  driverDescription DisplayString

PhysicalDiskPerf  
SEQUENCE    
  physicalDiskId INTEGER
  avgBytesPerRead INTEGER
  avgBytesPerWrite INTEGER
  avgBytesPerTransfer INTEGER
  avgSecPerRead INTEGER
  avgSecPerWrite INTEGER
  avgSecPerTransfer INTEGER
  diskReadBytesPerSec INTEGER
  diskWriteBytesPerSec INTEGER
  diskBytesPerSec INTEGER
  diskReadPerSec INTEGER
  diskWritePerSec INTEGER
  diskTransferPerSec INTEGER

LogicalDiskPerf  
SEQUENCE    
  logicalDiskId INTEGER
  lavgBytesPerRead INTEGER
  lavgBytesPerWrite INTEGER
  lavgBytesPerTransfer INTEGER
  lavgSecPerRead INTEGER
  lavgSecPerWrite INTEGER
  lavgSecPerTransfer INTEGER
  ldiskReadBytesPerSec INTEGER
  ldiskWriteBytesPerSec INTEGER
  ldiskBytesPerSec INTEGER
  ldiskReadPerSec INTEGER
  ldiskWritePerSec INTEGER
  ldiskTransferPerSec INTEGER

FanInfo  
SEQUENCE    
  fanLocation DisplayString
  fanStatus INTEGER

ThermometerInfo  
SEQUENCE    
  thermometerLocation DisplayString
  thermometerDegree INTEGER

VoltageInfo  
SEQUENCE    
  voltageLocation DisplayString
  currentVoltage INTEGER
  validVoltage INTEGER
  maxVoltage INTEGER
  minVoltage INTEGER

BusCounterInfo  
SEQUENCE    
  busCounterLocation DisplayString
  busUtilization INTEGER

TrapTargetInfo  
SEQUENCE    
  targetAddress DisplayString

RdmStatus  
INTEGER notExist(0), good(1), bad(2), disabled(3)    

EventNotification  
SEQUENCE    
  asmEventType INTEGER
  eventAction INTEGER
  eventProgram DisplayString Size(0..120)
  eventPager DisplayString Size(0..40)

Defined Values

acer 1.3.6.1.4.1.1050
OBJECT IDENTIFIER    

asm 1.3.6.1.4.1.1050.25
OBJECT IDENTIFIER    

storage 1.3.6.1.4.1.1050.25.1
OBJECT IDENTIFIER    

nic 1.3.6.1.4.1.1050.25.2
OBJECT IDENTIFIER    

systemBoard 1.3.6.1.4.1.1050.25.3
OBJECT IDENTIFIER    

serverEnvrm 1.3.6.1.4.1.1050.25.4
OBJECT IDENTIFIER    

asmsystem 1.3.6.1.4.1.1050.25.5
OBJECT IDENTIFIER    

asmalarm 1.3.6.1.4.1.1050.25.7
OBJECT IDENTIFIER    

nwNic 1.3.6.1.4.1.1050.25.2.3
OBJECT IDENTIFIER    

scoNic 1.3.6.1.4.1.1050.25.2.4
OBJECT IDENTIFIER    

ntNic 1.3.6.1.4.1.1050.25.2.5
OBJECT IDENTIFIER    

disketteDriveTable 1.3.6.1.4.1.1050.25.1.1
This entry is a table containing information about all diskette drives.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DisketteDriveEntry

disketteDriveEntry 1.3.6.1.4.1.1050.25.1.1.1
This entry contains information about each diskette drive.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisketteDriveEntry  

disketteDrvIndex 1.3.6.1.4.1.1050.25.1.1.1.1
This entry displays the diskette drive table index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisketteDrvIndex  

disketteDrvType 1.3.6.1.4.1.1050.25.1.1.1.2
This entry displays the diskette drive type: 0 = Not present 1 = 360K 5.25inch 2 = 1.2M 5.25inch 3 = 720K 3.5inch 4 = 1.44M 3.5inch 5 = 2.88M 3.5inch
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..5  

totalHdCntrlNum 1.3.6.1.4.1.1050.25.1.2
This entry displays the total number of hard disk controllers (HDC).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdControllerTable 1.3.6.1.4.1.1050.25.1.3
This entry is a table containing information about all HDCs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HdControllerEntry

hdControllerEntry 1.3.6.1.4.1.1050.25.1.3.1
This entry contains information about each HDC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HdControllerEntry  

hdCntrlNum 1.3.6.1.4.1.1050.25.1.3.1.1
This entry is an index to the HDC table starting at zero (0).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdCntrlSlotNum 1.3.6.1.4.1.1050.25.1.3.1.2
This entry shows the slot number occupied by the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

hdCntrlType 1.3.6.1.4.1.1050.25.1.3.1.4
This entry shows the HDC type: 0 = Unknown 1 = SCSI 2 = IDE
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdCntrlIoPort 1.3.6.1.4.1.1050.25.1.3.1.6
This entry shows the I/O port address occupied by the HDC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hdCntrlIntr 1.3.6.1.4.1.1050.25.1.3.1.7
This entry shows the interrupt number occupied by the HDC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

hdCntrlDMA 1.3.6.1.4.1.1050.25.1.3.1.9
This entry shows the DMA channel occupied by the HDC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

hdCntrlModel 1.3.6.1.4.1.1050.25.1.3.1.11
This entry shows the HDC model name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

totalDiskNum 1.3.6.1.4.1.1050.25.1.4
This entry displays the number of hard disks installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskTable 1.3.6.1.4.1.1050.25.1.5
This entry is a table containing information about all hard disks installed.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DiskEntry

diskEntry 1.3.6.1.4.1.1050.25.1.5.1
This entry contains information about each disk drive installed.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DiskEntry  

diskNum 1.3.6.1.4.1.1050.25.1.5.1.1
This entry is an index to the disk table starting at zero (0).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskHdCntrlNum 1.3.6.1.4.1.1050.25.1.5.1.2
This entry shows the HDC number (refer to hdCntrlNum) to which the disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskHdCntrlSlotNum 1.3.6.1.4.1.1050.25.1.5.1.3
This entry shows the slot number of the HDC (refer to hdCntrlSlotNum) to which the disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

diskId 1.3.6.1.4.1.1050.25.1.5.1.5
This entry displays disk IDs depending on each disk type. For example, with a SCSI disk installed, the value for this entry will represent a SCSI ID. IDE disks have two values: 0 refers to a master drive while 1 refers to a slave drive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

diskSize 1.3.6.1.4.1.1050.25.1.5.1.7
This entry shows the physical disk size in KB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskModel 1.3.6.1.4.1.1050.25.1.5.1.8
This entry shows the disk model.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

diskType 1.3.6.1.4.1.1050.25.1.5.1.10
This entry shows the disk type, i.e. SCSI, IDE or N/A.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

diskBusyRatio 1.3.6.1.4.1.1050.25.1.5.1.12
This entry shows the Disk Busy ratio (%).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

averageDiskReadWriteTime 1.3.6.1.4.1.1050.25.1.5.1.13
This entry shows the disk's average read/write time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfDiskTransfer 1.3.6.1.4.1.1050.25.1.5.1.14
This entry shows the number of disk transfers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

byteOfDiskTransfer 1.3.6.1.4.1.1050.25.1.5.1.15
This entry shows the total size of all disk transfers in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

deviceType 1.3.6.1.4.1.1050.25.1.5.1.16
This entry shows the device type. 0 : Unknown device 1 : Hard disk 2 : CD-ROM drive 3 : Tape drive
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

totalNicCntrlNum 1.3.6.1.4.1.1050.25.2.1
This entry displays the number of network interface controllers (NIC) installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

nicControllerTable 1.3.6.1.4.1.1050.25.2.2
This entry is a table containing information about all NICs installed.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NicControllerEntry

nicControllerEntry 1.3.6.1.4.1.1050.25.2.2.1
This entry contains generic information about each NIC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NicControllerEntry  

nicCntrlNum 1.3.6.1.4.1.1050.25.2.2.1.1
This entry is an index of the NIC table starting at 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nicCntrlSlotNum 1.3.6.1.4.1.1050.25.2.2.1.2
This entry shows the slot number occupied by the NIC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nicCntrlIoPort 1.3.6.1.4.1.1050.25.2.2.1.3
This entry shows the IO port occupied by the NIC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nicCntrlDMA 1.3.6.1.4.1.1050.25.2.2.1.4
This entry shows the DMA channel occupied by the NIC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

nicCntrlIntr 1.3.6.1.4.1.1050.25.2.2.1.5
This entry shows the interrupt number occupied by the NIC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

nicCntrlSharedMem 1.3.6.1.4.1.1050.25.2.2.1.6
This entry shows the shared memory address used by the NIC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nicCntrlModel 1.3.6.1.4.1.1050.25.2.2.1.8
This entry shows the NIC model.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nicCntrlType 1.3.6.1.4.1.1050.25.2.2.1.10
This entry shows the NIC type information such as Ethernet or Token Ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nicMACAddress 1.3.6.1.4.1.1050.25.2.2.1.11
This entry shows the NIC hardware's six-byte address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

nicMediaType 1.3.6.1.4.1.1050.25.2.2.1.12
This entry shows the NIC media type information: 1=Ethernet 2=Token-Ring
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

nicInterfaceSpeed 1.3.6.1.4.1.1050.25.2.2.1.13
This entry shows the NIC interface speed information in byte/sec
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

glbThldNicByte 1.3.6.1.4.1.1050.25.2.6
This entry is the global threshold setting for NIC received/transmitted bytes. Default is 100Mbps/8 = 12500000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

glbThldNicPacket 1.3.6.1.4.1.1050.25.2.7
This entry is the global threshold setting for NIC received/transmitted packets. Default is 100Mbps/8/50 = 250000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

glbThldNicFault 1.3.6.1.4.1.1050.25.2.8
This entry is the global threshold setting for NIC fault counters. Default is 0xFFFFFFFF, therefore, no SNMP traps will be sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicGenericCounterTable 1.3.6.1.4.1.1050.25.2.3.1
This entry is a table containing information about all groups of NetWare NIC generic counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NWNicGenericCounter

nwNicGenericCounter 1.3.6.1.4.1.1050.25.2.3.1.1
This entry contains information about each group of NetWare NIC generic counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NWNicGenericCounter  

nwNicNumRcvPkts 1.3.6.1.4.1.1050.25.2.3.1.1.1
This entry shows the number of received packets by the LAN card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nwNicNumRcvBytes 1.3.6.1.4.1.1050.25.2.3.1.1.2
This entry shows the number of received bytes by the LAN card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nwNicNumSndPkts 1.3.6.1.4.1.1050.25.2.3.1.1.3
This entry shows the number of sent packets from the LAN card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nwNicNumSndBytes 1.3.6.1.4.1.1050.25.2.3.1.1.4
This entry shows the number of sent bytes from the LAN card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

nwNicNoEcbCount 1.3.6.1.4.1.1050.25.2.3.1.1.5
This entry shows the No ECB Available Count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicSndTooBigCnt 1.3.6.1.4.1.1050.25.2.3.1.1.6
This entry shows the Send Packet Too Big Count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicRcvPktOvlCnt 1.3.6.1.4.1.1050.25.2.3.1.1.7
This entry shows the Receive Packet Overflow Count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicRcvPktTooBigCnt 1.3.6.1.4.1.1050.25.2.3.1.1.8
This entry shows the Receive Packet Too Big Count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicRcvPktTooSmallCnt 1.3.6.1.4.1.1050.25.2.3.1.1.9
This entry shows the Receive Packet Too Small Count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicRcvPktMiscErr 1.3.6.1.4.1.1050.25.2.3.1.1.10
This entry shows the Receive Packet Miscellaneous Errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicSndPktMiscErr 1.3.6.1.4.1.1050.25.2.3.1.1.11
This entry shows the Send Packet Miscellaneous Errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicSndPktRetryCnt 1.3.6.1.4.1.1050.25.2.3.1.1.12
This entry shows the Send Packet Retry Count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicChkSumErr 1.3.6.1.4.1.1050.25.2.3.1.1.13
This entry shows the Checksum Errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicRcvMismatchCnt 1.3.6.1.4.1.1050.25.2.3.1.1.14
This entry shows the Hardware Receive Mismatch Count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicAdapterRstCnt 1.3.6.1.4.1.1050.25.2.3.1.1.15
This entry shows the Adapter Reset Count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicGenericThresholdTable 1.3.6.1.4.1.1050.25.2.3.2
This entry is a table containing information about all groups of thresholds for NetWare NIC generic counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NWNicGenericThreshold

nwNicGenericThreshold 1.3.6.1.4.1.1050.25.2.3.2.1
This entry contains information about each group of thresholds for NetWare NIC generic counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NWNicGenericThreshold  

nwNicNumRcvPktsThreshold 1.3.6.1.4.1.1050.25.2.3.2.1.1
This entry shows the threshold setting of received packets by the LAN card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicNumRcvBytesThreshold 1.3.6.1.4.1.1050.25.2.3.2.1.2
This entry shows the threshold setting of received bytes by the LAN card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicNumSndPktsThreshold 1.3.6.1.4.1.1050.25.2.3.2.1.3
This entry shows the threshold setting of sent packets from the LAN card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicNumSndBytesThreshold 1.3.6.1.4.1.1050.25.2.3.2.1.4
This entry shows the threshold setting of sent bytes from the LAN card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicNoEcbCountThreshold 1.3.6.1.4.1.1050.25.2.3.2.1.5
This entry shows the threshold setting of No ECB Available Count.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicSndTooBigCntThreshold 1.3.6.1.4.1.1050.25.2.3.2.1.6
This entry shows the threshold setting of Send Packet Too Big Count.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicRcvPktOvlCntThreshold 1.3.6.1.4.1.1050.25.2.3.2.1.7
This entry shows the threshold setting of Receive Packet Overflow Count.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicRcvPktTooBigCntThreshold 1.3.6.1.4.1.1050.25.2.3.2.1.8
This entry shows the threshold setting of Receive Packet Too Big Count.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicRcvPktTooSmallCntThreshold 1.3.6.1.4.1.1050.25.2.3.2.1.9
This entry shows the threshold setting of Receive Packet Too Small Count.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicRcvPktMiscErrThreshold 1.3.6.1.4.1.1050.25.2.3.2.1.10
This entry shows the threshold setting of Receive Packet Miscellaneous Errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicSndPktMiscErrThreshold 1.3.6.1.4.1.1050.25.2.3.2.1.11
This entry shows the threshold setting of Send Packet Miscellaneous Errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicSndPktRetryCntThreshold 1.3.6.1.4.1.1050.25.2.3.2.1.12
This entry shows the threshold setting of Send Packet Retry Count.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicChkSumErrThreshold 1.3.6.1.4.1.1050.25.2.3.2.1.13
This entry shows the threshold setting of Checksum Errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicRcvMismatchCntThreshold 1.3.6.1.4.1.1050.25.2.3.2.1.14
This entry shows the threshold setting of Hardware Receive Mismatch Count.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicAdapterRstCntThreshold 1.3.6.1.4.1.1050.25.2.3.2.1.15
This entry shows the threshold setting of Adapter Reset Count.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicEthernetCounterTable 1.3.6.1.4.1.1050.25.2.3.3
This entry is a table containing information about all groups of NetWare NIC Ethernet counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NWNicEthernetCounter

nwNicEthernetCounter 1.3.6.1.4.1.1050.25.2.3.3.1
This entry contains information about each group of NetWare NIC Ethernet counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NWNicEthernetCounter  

nwNicSndOkSingleColliCnt 1.3.6.1.4.1.1050.25.2.3.3.1.1
This entry shows the Send OK Single Collision Count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicSndOkMultipleColliCnt 1.3.6.1.4.1.1050.25.2.3.3.1.2
This entry shows the Send OK Multiple Collision Count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicSndOkButDeferred 1.3.6.1.4.1.1050.25.2.3.3.1.3
This entry shows the Send OK But Deferred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicSndAbortLateColli 1.3.6.1.4.1.1050.25.2.3.3.1.4
This entry shows the Send Abort From Late Collision.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicSndAbortExcessColli 1.3.6.1.4.1.1050.25.2.3.3.1.5
This entry shows the Send Abort From Excess Collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicSndAbortCarrierSense 1.3.6.1.4.1.1050.25.2.3.3.1.6
This entry shows the Send Abort From Carrier Sense.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicSndAbortExcessDefer 1.3.6.1.4.1.1050.25.2.3.3.1.7
This entry shows the Send Abort From Excessive Deferral.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicRcvAbortFrameAlignment 1.3.6.1.4.1.1050.25.2.3.3.1.8
This entry shows the Receive Abort From Bad Frame Alignment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicEthernetThresholdTable 1.3.6.1.4.1.1050.25.2.3.4
This entry is a table containing information about all groups of thresholds for NetWare NIC Ethernet counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NWNicEthernetThreshold

nwNicEthernetThreshold 1.3.6.1.4.1.1050.25.2.3.4.1
This entry contains information about each group of thresholds for NetWare NIC Ethernet counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NWNicEthernetThreshold  

nwNicSndOkSingleColliCntThreshold 1.3.6.1.4.1.1050.25.2.3.4.1.1
This entry shows the threshold setting of Send OK Single Collision Count.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicSndOkMultipleColliCntThreshold 1.3.6.1.4.1.1050.25.2.3.4.1.2
This entry shows the threshold setting of Send OK Multiple Collision Count.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicSndOkButDeferredThreshold 1.3.6.1.4.1.1050.25.2.3.4.1.3
This entry shows the threshold setting of Send OK But Deferred.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicSndAbortLateColliThreshold 1.3.6.1.4.1.1050.25.2.3.4.1.4
This entry shows the threshold setting of Send Abort From Late Collision.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicSndAbortExcessColliThreshold 1.3.6.1.4.1.1050.25.2.3.4.1.5
This entry shows the threshold setting of Send Abort From Excess Collisions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicSndAbortCarrierSenseThreshold 1.3.6.1.4.1.1050.25.2.3.4.1.6
This entry shows the threshold setting of Send Abort From Carrier Sense.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicSndAbortExcessDeferThreshold 1.3.6.1.4.1.1050.25.2.3.4.1.7
This entry shows the threshold setting of Send Abort From Excessive Deferral.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicRcvAbortFrameAlignmentThreshold 1.3.6.1.4.1.1050.25.2.3.4.1.8
This entry shows the threshold setting of Receive Abort From Bad Frame Alignment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicTokenRingCounterTable 1.3.6.1.4.1.1050.25.2.3.5
This entry is a table containing information about all groups of NetWare NIC Token Ring counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NWNicTokenRingCounter

nwNicTokenRingCounter 1.3.6.1.4.1.1050.25.2.3.5.1
This entry contains information about each group of NetWare NIC Token Ring counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NWNicTokenRingCounter  

nwNicACErrorCounter 1.3.6.1.4.1.1050.25.2.3.5.1.1
This entry shows the ACErrorCounter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicAbortDelimiterCounter 1.3.6.1.4.1.1050.25.2.3.5.1.2
This entry shows the AbortDelimiterCounter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicBurstErrorCounter 1.3.6.1.4.1.1050.25.2.3.5.1.3
This entry shows the BurstErrorCounter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicFrameCopiedErrorCounter 1.3.6.1.4.1.1050.25.2.3.5.1.4
This entry shows the FrameCopiedErrorCounter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicFrequencyErrorCounter 1.3.6.1.4.1.1050.25.2.3.5.1.5
This entry shows the FrequencyErrorCounter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicInternalErrorCounter 1.3.6.1.4.1.1050.25.2.3.5.1.6
This entry shows the InternalErrorCounter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicLastRingStatus 1.3.6.1.4.1.1050.25.2.3.5.1.7
This entry shows the LastRingStatus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicLineErrorCounter 1.3.6.1.4.1.1050.25.2.3.5.1.8
This entry shows the LineErrorCounter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicLostFrameCounter 1.3.6.1.4.1.1050.25.2.3.5.1.9
This entry shows the LostFrameCounter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicTokenErrorCounter 1.3.6.1.4.1.1050.25.2.3.5.1.10
This entry shows the TokenErrorCounter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

nwNicTokenRingThresholdTable 1.3.6.1.4.1.1050.25.2.3.6
This entry is a table containing information about all groups of thresholds for NetWare NIC Token Ring counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NWNicTokenRingThreshold

nwNicTokenRingThreshold 1.3.6.1.4.1.1050.25.2.3.6.1
This entry contains information about each group of thresholds for NetWare NIC Token Ring counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NWNicTokenRingThreshold  

nwNicACErrorCounterThreshold 1.3.6.1.4.1.1050.25.2.3.6.1.1
This entry shows the threshold setting of ACErrorCounter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicAbortDelimiterCounterThreshold 1.3.6.1.4.1.1050.25.2.3.6.1.2
This entry shows the threshold setting of AbortDelimiterCounter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicBurstErrorCounterThreshold 1.3.6.1.4.1.1050.25.2.3.6.1.3
This entry shows the threshold setting of BurstErrorCounter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicFrameCopiedErrorCounterThreshold 1.3.6.1.4.1.1050.25.2.3.6.1.4
This entry shows the threshold setting of FrameCopiedErrorCounter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicFrequencyErrorCounterThreshold 1.3.6.1.4.1.1050.25.2.3.6.1.5
This entry shows the threshold setting of FrequencyErrorCounter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicInternalErrorCounterThreshold 1.3.6.1.4.1.1050.25.2.3.6.1.6
This entry shows the threshold setting of InternalErrorCounter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicLastRingStatusThreshold 1.3.6.1.4.1.1050.25.2.3.6.1.7
This entry shows the threshold setting of LastRingStatus.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicLineErrorCounterThreshold 1.3.6.1.4.1.1050.25.2.3.6.1.8
This entry shows the threshold setting of LineErrorCounter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicLostFrameCounterThreshold 1.3.6.1.4.1.1050.25.2.3.6.1.9
This entry shows the threshold setting of LostFrameCounter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

nwNicTokenErrorCounterThreshold 1.3.6.1.4.1.1050.25.2.3.6.1.10
This entry shows the threshold setting of TokenErrorCounter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicGenericCounterTable 1.3.6.1.4.1.1050.25.2.5.1
This entry is a table of Windows NT NIC generic counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NTNicGenericCounter

ntNicGenericCounter 1.3.6.1.4.1.1050.25.2.5.1.1
This entry contains information about each Windows NT NIC generic counter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NTNicGenericCounter  

ntNicCntFrameXmitOk 1.3.6.1.4.1.1050.25.2.5.1.1.1
This entry is the number of frames transmitted without errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntFrameRcvOk 1.3.6.1.4.1.1050.25.2.5.1.1.2
This entry is the number of frames the NIC received with no errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntFrameXmitErr 1.3.6.1.4.1.1050.25.2.5.1.1.3
This entry is the number of frames the NIC fails to transmit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntFrameRcvErr 1.3.6.1.4.1.1050.25.2.5.1.1.4
This entry is the number of frames the NIC receives but is abandoned due to errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntRcvFailNoBuf 1.3.6.1.4.1.1050.25.2.5.1.1.5
This entry is the number of frames the NIC cannot receive due to lack of buffer space.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntDirByteXmit 1.3.6.1.4.1.1050.25.2.5.1.1.6
This entry is the number of bytes in directed packets transmitted without errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntDirPktXmit 1.3.6.1.4.1.1050.25.2.5.1.1.7
This entry is the number of directed packets transmitted without errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntMulCastByteXmit 1.3.6.1.4.1.1050.25.2.5.1.1.8
This entry is the number of bytes in multicast packets transmitted without errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntMulCastPktXmit 1.3.6.1.4.1.1050.25.2.5.1.1.9
This entry is the number of multicast packets transmitted without errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntBrdCastByteXmit 1.3.6.1.4.1.1050.25.2.5.1.1.10
This entry is the number of bytes in broadcast packets transmitted without errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntBrdCastPktXmit 1.3.6.1.4.1.1050.25.2.5.1.1.11
This entry is the number of broadcast packets transmitted without errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntDirByteRcv 1.3.6.1.4.1.1050.25.2.5.1.1.12
This entry is the number of bytes in directed packets received without errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntDirPktRcv 1.3.6.1.4.1.1050.25.2.5.1.1.13
This entry is the number of directed packets received without errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntMulCastByteRcv 1.3.6.1.4.1.1050.25.2.5.1.1.14
This entry is the number of bytes in multicast packets received without errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntMulCastPktRcv 1.3.6.1.4.1.1050.25.2.5.1.1.15
This entry is the number of multicast packets received without errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntBrdCastByteRcv 1.3.6.1.4.1.1050.25.2.5.1.1.16
This entry is the number of bytes in broadcast packets received without errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntBrdCastPktRcv 1.3.6.1.4.1.1050.25.2.5.1.1.17
This entry is the number of broadcast packets received without errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntFrameRcvCRCErr 1.3.6.1.4.1.1050.25.2.5.1.1.18
This entry is the number of frames received with checksum errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicXmitQueueLength 1.3.6.1.4.1.1050.25.2.5.1.1.19
This entry is the number of packets the NIC driver queues for transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ntNicGenericThresholdTable 1.3.6.1.4.1.1050.25.2.5.2
This entry is a table of threshold values for Windows NT NIC generic counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NTNicGenericThreshold

ntNicGenericThreshold 1.3.6.1.4.1.1050.25.2.5.2.1
This entry contains the threshold value for each Windows NT NIC generic counter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NTNicGenericThreshold  

ntNicTldFrameXmitOk 1.3.6.1.4.1.1050.25.2.5.2.1.1
This entry is the threshold value of frames transmitted without errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldFrameRcvOk 1.3.6.1.4.1.1050.25.2.5.2.1.2
This entry is the threshold value of frames the NIC receives with no errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldFrameXmitErr 1.3.6.1.4.1.1050.25.2.5.2.1.3
This entry is the threshold value of frames the NIC fails to transmit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldFrameRcvErr 1.3.6.1.4.1.1050.25.2.5.2.1.4
This entry is the threshold value of frames the NIC receives but are abandoned due to errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldRcvFailNoBuf 1.3.6.1.4.1.1050.25.2.5.2.1.5
This entry is the threshold value of frames the NIC cannot receive due to lack of buffer space.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldDirByteXmit 1.3.6.1.4.1.1050.25.2.5.2.1.6
This entry is the threshold value of bytes in directed packets transmitted without errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldDirPktXmit 1.3.6.1.4.1.1050.25.2.5.2.1.7
This entry is the threshold value of directed packets transmitted without errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldMulCastByteXmit 1.3.6.1.4.1.1050.25.2.5.2.1.8
This entry is the threshold value of bytes in multicast packets transmitted without errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldMulCastPktXmit 1.3.6.1.4.1.1050.25.2.5.2.1.9
This entry is the threshold value of multicast packets transmitted without errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldBrdCastByteXmit 1.3.6.1.4.1.1050.25.2.5.2.1.10
This entry is the threshold value of bytes in broadcast packets transmitted without errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldBrdCastPktXmit 1.3.6.1.4.1.1050.25.2.5.2.1.11
This entry is the threshold value of broadcast packets transmitted without errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldDirByteRcv 1.3.6.1.4.1.1050.25.2.5.2.1.12
This entry is the threshold value of bytes in directed packets received without errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldDirPktRcv 1.3.6.1.4.1.1050.25.2.5.2.1.13
This entry is the threshold value of directed packets received without errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldMulCastByteRcv 1.3.6.1.4.1.1050.25.2.5.2.1.14
This entry is the threshold value of bytes in multicast packets received without errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldMulCastPktRcv 1.3.6.1.4.1.1050.25.2.5.2.1.15
This entry is the threshold value of multicast packets received without errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldBrdCastByteRcv 1.3.6.1.4.1.1050.25.2.5.2.1.16
This entry is the threshold value of bytes in broadcast packets received without errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldBrdCastPktRcv 1.3.6.1.4.1.1050.25.2.5.2.1.17
This entry is the threshold value of broadcast packets received without errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldFrameRcvCRCErr 1.3.6.1.4.1.1050.25.2.5.2.1.18
This entry is the threshold value of frames received with checksum errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldXmitQueueLength 1.3.6.1.4.1.1050.25.2.5.2.1.19
This entry is the threshold value of packets the NIC driver queues for transmission.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicEthernetCounterTable 1.3.6.1.4.1.1050.25.2.5.3
This entry is a table of Windows NT NIC Ethernet counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NTNicEthernetCounter

ntNicEthernetCounter 1.3.6.1.4.1.1050.25.2.5.3.1
This entry contains information about each Windows NT NIC Ethernet counter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NTNicEthernetCounter  

ntNicCntRcvFrameAlignErr 1.3.6.1.4.1.1050.25.2.5.3.1.1
This entry is the number of frames received with alignment errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntXmitOkOneCollision 1.3.6.1.4.1.1050.25.2.5.3.1.2
This entry is the number of frames successfully transmitted after exactly one collision.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntXmitOkMoreCollision 1.3.6.1.4.1.1050.25.2.5.3.1.3
This entry is the number of frames successfully transmitted after more than one collision.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntXmitOkDeffered 1.3.6.1.4.1.1050.25.2.5.3.1.4
This entry is the number of frames successfully transmitted after the NIC defers transmission at least once.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntXmitFailMaxCollision 1.3.6.1.4.1.1050.25.2.5.3.1.5
This entry is the number of frames not transmitted due to excessive collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntRcvErrOverrun 1.3.6.1.4.1.1050.25.2.5.3.1.6
This entry is the number of frames not received due to over-run errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntXmitErrUnderrun 1.3.6.1.4.1.1050.25.2.5.3.1.7
This entry is the number of frames not transmitted due to under-run errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntXmitHeartbeat 1.3.6.1.4.1.1050.25.2.5.3.1.8
This entry is the number of frames successfully transmitted without detection of the collision-detect heartbeat.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntTimesCRSLost 1.3.6.1.4.1.1050.25.2.5.3.1.9
This entry is the number of times the CRS signal has been lost during packet transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntXmitLateCollision 1.3.6.1.4.1.1050.25.2.5.3.1.10
This entry is the number of collisions detected after the normal window.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicEthernetThresholdTable 1.3.6.1.4.1.1050.25.2.5.4
This entry is a table of threshold values for Windows NT NIC Ethernet counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NTNicEthernetThreshold

ntNicEthernetThreshold 1.3.6.1.4.1.1050.25.2.5.4.1
This entry contains the threshold value for each Windows NT NIC Ethernet counter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NTNicEthernetThreshold  

ntNicTldRcvFrameAlignErr 1.3.6.1.4.1.1050.25.2.5.4.1.1
This entry is the threshold value of frames received with alignment errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldXmitOkOneCollision 1.3.6.1.4.1.1050.25.2.5.4.1.2
This entry is the threshold value of frames successfully transmitted after exactly one collision.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldXmitOkMoreCollision 1.3.6.1.4.1.1050.25.2.5.4.1.3
This entry is the threshold value of frames successfully transmitted after more than one collision.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldXmitOkDeffered 1.3.6.1.4.1.1050.25.2.5.4.1.4
This entry is the threshold value of frames successfully transmitted after the NIC defers transmission at least once.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldXmitFailMaxCollision 1.3.6.1.4.1.1050.25.2.5.4.1.5
This entry is the threshold value of frames not transmitted due to excessive collisions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldRcvErrOverrun 1.3.6.1.4.1.1050.25.2.5.4.1.6
This entry is the threshold value of frames not received due to over-run errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldXmitErrUnderrun 1.3.6.1.4.1.1050.25.2.5.4.1.7
This entry is the threshold value of frames not transmitted due to under-run errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldXmitHeartbeat 1.3.6.1.4.1.1050.25.2.5.4.1.8
This entry is the threshold value of frames successfully transmitted without detection of the collision-detect heartbeat.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldTimesCRSLost 1.3.6.1.4.1.1050.25.2.5.4.1.9
This entry is the threshold value for the number of times the CRS signal has been lost during packet transmission.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldXmitLateCollision 1.3.6.1.4.1.1050.25.2.5.4.1.10
This entry is the threshold value of collisions detected after the normal window.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTokenRingCounterTable 1.3.6.1.4.1.1050.25.2.5.5
This entry is a table of Windows NT NIC Token Ring counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NTNicTokenRingCounter

ntNicTokenRingCounter 1.3.6.1.4.1.1050.25.2.5.5.1
This entry contains information about each Windows NT NIC Token Ring counter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NTNicTokenRingCounter  

ntNicCntACError 1.3.6.1.4.1.1050.25.2.5.5.1.1
This entry is the number of frames with A/C errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntAbortDelimiter 1.3.6.1.4.1.1050.25.2.5.5.1.2
This entry is the number of abort delimiters transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntBurstError 1.3.6.1.4.1.1050.25.2.5.5.1.3
This entry is the number of frames containing five half bits with no transition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntFrameCopiedError 1.3.6.1.4.1.1050.25.2.5.5.1.4
This entry is the number of frames addressed to the network interface card that another NIC on the ring has also copied.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntFrequencyError 1.3.6.1.4.1.1050.25.2.5.5.1.5
This entry is the number of frequency errors on the ring.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntInternalError 1.3.6.1.4.1.1050.25.2.5.5.1.6
This entry is the number of internal errors the NIC has detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntLastRingStatus 1.3.6.1.4.1.1050.25.2.5.5.1.7
This entry is an NDIS_STATUS_RING_STATUS code indicates the last ring status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntLineError 1.3.6.1.4.1.1050.25.2.5.5.1.8
This entry is the number of frames with an invalid FCS or a code violation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntLostFrame 1.3.6.1.4.1.1050.25.2.5.5.1.9
This entry is the number of frames transmitted that have not circled the ring within the maximum ring latency.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicCntTokenError 1.3.6.1.4.1.1050.25.2.5.5.1.10
This entry is the number of times the NIC has been the active monitor and has had to recreate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

ntNicTokenRingThresholdTable 1.3.6.1.4.1.1050.25.2.5.6
This entry is a table of threshold values for Windows NT NIC Token Ring counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NTNicTokenRingThreshold

ntNicTokenRingThreshold 1.3.6.1.4.1.1050.25.2.5.6.1
This entry contains the threshold value for each Windows NT NIC Token Ring counter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NTNicTokenRingThreshold  

ntNicTldACError 1.3.6.1.4.1.1050.25.2.5.6.1.1
This entry is the threshold value of frames with A/C errors.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldAbortDelimiter 1.3.6.1.4.1.1050.25.2.5.6.1.2
This entry is the threshold value of abort delimiters transmitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldBurstError 1.3.6.1.4.1.1050.25.2.5.6.1.3
This entry is the threshold value of frames containing five half bits with no transition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldFrameCopiedError 1.3.6.1.4.1.1050.25.2.5.6.1.4
This entry is the threshold value of frames addressed to the network interface card that another NIC on the ring has also copied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldFrequencyError 1.3.6.1.4.1.1050.25.2.5.6.1.5
This entry is the threshold value of frequency errors on the ring.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldInternalError 1.3.6.1.4.1.1050.25.2.5.6.1.6
This entry is the threshold value of internal errors the NIC has detected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldLastRingStatus 1.3.6.1.4.1.1050.25.2.5.6.1.7
This entry is the threshold value of the last ring status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldLineError 1.3.6.1.4.1.1050.25.2.5.6.1.8
This entry is the threshold value of the number of frames with an invalid FCS or a code violation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldLostFrame 1.3.6.1.4.1.1050.25.2.5.6.1.9
This entry is the threshold value for the number of frames transmitted that have not circled the ring within the maximum ring latency.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ntNicTldTokenError 1.3.6.1.4.1.1050.25.2.5.6.1.10
This entry is the threshold value for the number of times the NIC has been the active monitor and has had to recreate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicGenericCounterTable 1.3.6.1.4.1.1050.25.2.4.1
This entry is a table of SCO NIC generic counters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SCONicGenericCounter

scoNicGenericCounter 1.3.6.1.4.1.1050.25.2.4.1.1
This entry contains information about each SCO NIC generic counter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SCONicGenericCounter  

scoNicNumRcvPkts 1.3.6.1.4.1.1050.25.2.4.1.1.1
This entry is the current number of received packets in this NIC card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

scoNicNumRcvBytes 1.3.6.1.4.1.1050.25.2.4.1.1.2
This entry is the current number of received bytes in this NIC card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

scoNicNumSndPkts 1.3.6.1.4.1.1050.25.2.4.1.1.3
This entry is the current number of sent packets in this NIC card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

scoNicNumSndBytes 1.3.6.1.4.1.1050.25.2.4.1.1.4
This entry is the current number of sent bytes in this NIC card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

scoNicFrameDef 1.3.6.1.4.1.1050.25.2.4.1.1.5
This entry is a variable that registers the number of frames deferred due to data link traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicCollisions 1.3.6.1.4.1.1050.25.2.4.1.1.6
This entry is a variable that registers the number of total collisions in transmitted frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicFrameColl 1.3.6.1.4.1.1050.25.2.4.1.1.7
This entry is a variable that registers the total collisions that occurred when a frame was being transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicOFrameColl 1.3.6.1.4.1.1050.25.2.4.1.1.8
This entry is a variable that registers the number of collisions that occurred when a frame was not being transmitted (out-of-frame collisions).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicXsColl 1.3.6.1.4.1.1050.25.2.4.1.1.9
This entry is a variable that registers the number of frames dropped due to excessive collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicFrameNosr 1.3.6.1.4.1.1050.25.2.4.1.1.10
This entry is a variable that registers the number of frames dropped due to allocb failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicNoResource 1.3.6.1.4.1.1050.25.2.4.1.1.11
This entry is the number of frames dropped due to no resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicBadSum 1.3.6.1.4.1.1050.25.2.4.1.1.12
This entry is a variable that registers the number of received frames with a bad checksum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicAlign 1.3.6.1.4.1.1050.25.2.4.1.1.13
This entry is a variable that registers the number of received frames with alignment errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicBadLen 1.3.6.1.4.1.1050.25.2.4.1.1.14
This entry is a variable that registers the number of received frames with a bad length.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicBadSap 1.3.6.1.4.1.1050.25.2.4.1.1.15
This entry is a variable that registers the number of frames received with no receiver above who desires to see those packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicMcastRjct 1.3.6.1.4.1.1050.25.2.4.1.1.16
This entry is a variable that registers the number of multicast frames received that were not in the multicast table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicCarrier 1.3.6.1.4.1.1050.25.2.4.1.1.17
This entry is a variable that registers the number of transmitted frames aborted due to carrier loss during transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicBadCts 1.3.6.1.4.1.1050.25.2.4.1.1.18
This entry is a variable that registers the number of transmitted frames aborted due to loss of the CTS signal during transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicBadDma 1.3.6.1.4.1.1050.25.2.4.1.1.19
This entry is a variable that registers the number of DMA over/under runs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicTimeOuts 1.3.6.1.4.1.1050.25.2.4.1.1.20
This entry is the number of device timeouts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

scoNicGenericThresholdTable 1.3.6.1.4.1.1050.25.2.4.2
This entry is a table of SCO NIC generic threshold values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SCONicGenericThreshold

scoNicGenericThreshold 1.3.6.1.4.1.1050.25.2.4.2.1
This entry is the threshold value for each SCO NIC generic counter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SCONicGenericThreshold  

scoNicNumRcvPktsThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.1
This entry is the current threshold value of received packets in this NIC card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicNumRcvBytesThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.2
This entry is the current threshold value of received bytes in this NIC card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicNumSndPktsThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.3
This entry is the current threshold value of sent packets in this NIC card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicNumSndBytesThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.4
This entry is the current threshold value of sent bytes in this NIC card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicFrameDefThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.5
This entry is the current threshold value for deferred frames.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicCollisionsThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.6
This entry is the current threshold value of total collisions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicFrameCollThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.7
This entry is the current threshold value of frames involved in a collision.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicOFrameCollThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.8
This entry is the current threshold value for out of frame collisions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicXsCollThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.9
This entry is the current threshold value of frames dropped due to excessive collisions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicFrameNosrThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.10
This entry is the current threshold value of frames dropped due to no streams.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicNoResourceThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.11
This entry is the current threshold value of frames dropped due to no resource.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicBadSumThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.12
This entry is the current threshold value of bad checksums received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicAlignThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.13
This entry is the current threshold value of bad alignment received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicBadLenThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.14
This entry is the current threshold value of bad length received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicBadSapThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.15
This entry is the current threshold value of bad SAP received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicMcastRjctThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.16
This entry is the current threshold value of multicast frames rejected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicCarrierThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.17
This entry is the current threshold value of errors due to lost carriers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicBadCtsThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.18
This entry is the current threshold value of errors due to lost CTS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicBadDmaThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.19
This entry is the current threshold value of DMA over/under runs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

scoNicTimeOutsThreshold 1.3.6.1.4.1.1050.25.2.4.2.1.20
This entry is the current threshold value for device timeouts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

totalSysFSNum 1.3.6.1.4.1.1050.25.4.53
This entry is the total number of SCO UNIX file systems.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysFSTable 1.3.6.1.4.1.1050.25.4.54
This entry is a table containing all SCO UNIX file system information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysFSEntry

sysFSEntry 1.3.6.1.4.1.1050.25.4.54.1
This entry contains information about each SCO UNIX file system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SysFSEntry  

sysFSNumber 1.3.6.1.4.1.1050.25.4.54.1.1
This entry is an index of file systems information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysFSName 1.3.6.1.4.1.1050.25.4.54.1.2
This entry is the file system name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

totalFSSize 1.3.6.1.4.1.1050.25.4.54.1.3
This entry is the total size of a file system in KB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

freeFSSize 1.3.6.1.4.1.1050.25.4.54.1.4
This entry is the current free size of a file system in KB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

usedFSSizeThreshold 1.3.6.1.4.1.1050.25.4.54.1.5
This entry is the threshold value (%) of the file system currently in use.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

totalFSinode 1.3.6.1.4.1.1050.25.4.54.1.6
This entry is the total inode counts of a file system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

freeFSinode 1.3.6.1.4.1.1050.25.4.54.1.7
This entry is the current free inode counts of a file system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysFSType 1.3.6.1.4.1.1050.25.4.54.1.8
This entry is the type of a file system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sysFSMountTime 1.3.6.1.4.1.1050.25.4.54.1.9
This entry is the mount time of a file system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

systemIrqsInfoTable 1.3.6.1.4.1.1050.25.3.1
This entry is a table containing IRQ numbers and the devices occupying each IRQ.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SystemIrqsInfoEntry

systemIrqsInfoEntry 1.3.6.1.4.1.1050.25.3.1.1
This entry contains information about each IRQ.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SystemIrqsInfoEntry  

irqNumber 1.3.6.1.4.1.1050.25.3.1.1.1
This entry is the IRQ number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

irqOccupiedDes 1.3.6.1.4.1.1050.25.3.1.1.2
This entry contains information about the device occupying the IRQ.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

systemDmasInfoTable 1.3.6.1.4.1.1050.25.3.2
This entry is a table containing DMA channels and the devices occupying each channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SystemDmasInfoEntry

systemDmasInfoEntry 1.3.6.1.4.1.1050.25.3.2.1
This entry contains information about each DMA channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SystemDmasInfoEntry  

dmaChannel 1.3.6.1.4.1.1050.25.3.2.1.1
This entry is the DMA channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

dmaOccupiedDes 1.3.6.1.4.1.1050.25.3.2.1.2
This entry contains information about the device occupying the DMA channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

totalIoPortsNum 1.3.6.1.4.1.1050.25.3.3
This entry shows the number of I/O ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

systemIoPortsInfoTable 1.3.6.1.4.1.1050.25.3.4
This entry is a table containing I/O port information and the devices occupying each port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SystemIoPortsInfoEntry

systemIoPortsInfoEntry 1.3.6.1.4.1.1050.25.3.4.1
This entry contains information about each I/O port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SystemIoPortsInfoEntry  

ioPortsIndex 1.3.6.1.4.1.1050.25.3.4.1.1
This entry is an index to the I/O port table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ioPortsBeginValue 1.3.6.1.4.1.1050.25.3.4.1.2
This entry shows the starting address of the I/O port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ioPortsEndValue 1.3.6.1.4.1.1050.25.3.4.1.3
This entry shows the ending address of the I/O port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ioPortsOccupiedDes 1.3.6.1.4.1.1050.25.3.4.1.4
This entry contains information about the I/O device occupying the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

systemSlotsInfoTable 1.3.6.1.4.1.1050.25.3.5
This entry is a table containing information about system slots.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SystemSlotsInfoEntry

systemSlotsInfoEntry 1.3.6.1.4.1.1050.25.3.5.1
This entry contains information about each system slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SystemSlotsInfoEntry  

slotsNumber 1.3.6.1.4.1.1050.25.3.5.1.1
This entry shows the slot number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slotsType 1.3.6.1.4.1.1050.25.3.5.1.2
This entry shows the slot type, EISA, ISA, or PCI. 0 = Unknown 1 = EISA 3 = ISA 5 = PCI
Status: mandatory Access: read-only
OBJECT-TYPE    
  SlotsType  

slotsOccupiedDes 1.3.6.1.4.1.1050.25.3.5.1.3
This entry shows the device installed on this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

totalMemSlotsNum 1.3.6.1.4.1.1050.25.3.6
This entry shows the number of SIMM slots.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

memoryTable 1.3.6.1.4.1.1050.25.3.7
This entry is a table containing system memory information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MemoryEntry

memoryEntry 1.3.6.1.4.1.1050.25.3.7.1
This entry contains information about each SIMM slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MemoryEntry  

memSlots 1.3.6.1.4.1.1050.25.3.7.1.1
This entry contains information about the memory module installed on the SIMM slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

simmType 1.3.6.1.4.1.1050.25.3.7.1.2
This entry shows the memory module size in MB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

systemBootControl 1.3.6.1.4.1.1050.25.3.11
This entry shows boot control information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

systemFloppyControl 1.3.6.1.4.1.1050.25.3.12
This entry shows diskette drive control information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

systemHddControl 1.3.6.1.4.1.1050.25.3.13
This entry shows hard disk control information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

totalBaseMemNum 1.3.6.1.4.1.1050.25.3.14
This entry shows the number of base memory blocks used by I/O devices.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

systemBaseMemTable 1.3.6.1.4.1.1050.25.3.15
This entry is a table containing information about base memory used by I/O devices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SystemBaseMemInfoEntry

systemBaseMemEntry 1.3.6.1.4.1.1050.25.3.15.1
This entry contains information about each base memory block.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SystemBaseMemInfoEntry  

baseMemIndex 1.3.6.1.4.1.1050.25.3.15.1.1
This entry is an index to the base memory table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

baseMemAddr 1.3.6.1.4.1.1050.25.3.15.1.2
This entry shows the starting address of the block of base memory used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

baseMemLength 1.3.6.1.4.1.1050.25.3.15.1.3
This entry shows the length of the block of base memory used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

baseMemOccupiedDes 1.3.6.1.4.1.1050.25.3.15.1.4
This entry contains a description of the device using the block of base memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

productName 1.3.6.1.4.1.1050.25.4.1
This entry shows the machine product name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

osVersion 1.3.6.1.4.1.1050.25.4.2
This entry shows information about the current operating system in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expanBusType 1.3.6.1.4.1.1050.25.4.3
This entry shows information about expansion slots. A system may contain one or more of the following types: ISA, EISA, PCI, VESA, etc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

processorType 1.3.6.1.4.1.1050.25.4.4
This entry shows the server's CPU information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

systemIntrlCache 1.3.6.1.4.1.1050.25.4.5
This entry shows the CPU's internal cache size in KB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

systemExtrlCache 1.3.6.1.4.1.1050.25.4.6
This shows the server's external cache size in KB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

systemTotalMemory 1.3.6.1.4.1.1050.25.4.7
This entry shows the system's total memory size in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

systemFreeMemory 1.3.6.1.4.1.1050.25.4.8
This entry shows the system's current free memory size in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

systemSerialPort1Info 1.3.6.1.4.1.1050.25.4.9
This entry contains information about the system's serial port 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

systemSerialPort2Info 1.3.6.1.4.1.1050.25.4.10
This entry contains information about the system's serial port 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

systemParallelPortInfo 1.3.6.1.4.1.1050.25.4.11
This entry contains information about the system's parallel port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

keyboardType 1.3.6.1.4.1.1050.25.4.12
This entry shows the system's keyboard type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

videoType 1.3.6.1.4.1.1050.25.4.13
This entry shows the system's display type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mouseType 1.3.6.1.4.1.1050.25.4.14
This entry shows the system's mouse type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sysBiosVer 1.3.6.1.4.1.1050.25.4.15
This entry shows the system BIOS version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

serverName 1.3.6.1.4.1.1050.25.4.16
This entry shows the server name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

serverUpTime 1.3.6.1.4.1.1050.25.4.17
This entry shows the amount of time the server has been running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

serverMgrContactInfoTable 1.3.6.1.4.1.1050.25.4.18
This entry is a table containing information about all server managers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ServerMgrContactInfoEntry

serverMgrContactInfoEntry 1.3.6.1.4.1.1050.25.4.18.1
This entry shows information about each server manager.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ServerMgrContactInfoEntry  

serverMgrNumber 1.3.6.1.4.1.1050.25.4.18.1.8
This entry is the server manager number starting from 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

serverMgrName 1.3.6.1.4.1.1050.25.4.18.1.1
This entry shows the server manager's name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

serverMgrOffPhone 1.3.6.1.4.1.1050.25.4.18.1.2
This entry shows the server manager's office phone number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

serverMgrOffAddr 1.3.6.1.4.1.1050.25.4.18.1.3
This entry shows the server manager's office address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

serverMgrHomePhone 1.3.6.1.4.1.1050.25.4.18.1.4
This entry shows the server manager's home phone number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

serverMgrHomeAddr 1.3.6.1.4.1.1050.25.4.18.1.5
This entry shows the server manager's home address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

serverMgrPagerNum 1.3.6.1.4.1.1050.25.4.18.1.6
This entry shows the server manager's pager number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

serverMgrEmailAddr 1.3.6.1.4.1.1050.25.4.18.1.7
This entry shows the server manager's email address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

serverLoc 1.3.6.1.4.1.1050.25.4.19
This entry shows the server's physical location.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

totalSysVolNum 1.3.6.1.4.1.1050.25.4.20
This entry shows the total number of system volumes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysVolTable 1.3.6.1.4.1.1050.25.4.21
This entry is a table containing information about all system volumes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysVolEntry

sysVolEntry 1.3.6.1.4.1.1050.25.4.21.1
This entry shows information about each system volume.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SysVolEntry  

sysVolNum 1.3.6.1.4.1.1050.25.4.21.1.1
This entry is the volume number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysVolName 1.3.6.1.4.1.1050.25.4.21.1.2
This entry shows the system volume name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

totalVolSize 1.3.6.1.4.1.1050.25.4.21.1.3
This entry shows the size of each system volume in KB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

freeVolSize 1.3.6.1.4.1.1050.25.4.21.1.4
This entry shows the current free size of a system volume in KB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

totalDirSize 1.3.6.1.4.1.1050.25.4.21.1.5
For NetWare, this entry shows the maximum number of directories that can be created in a system volume. For Windows NT, this entry shows the number of allocation units in a system volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

freeDirSize 1.3.6.1.4.1.1050.25.4.21.1.6
For NetWare, this entry shows the current number of directories that can still be created in a system volume. For Windows NT, this entry shows the current number of free allocation units in a system volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

usedVolSizeThreshold 1.3.6.1.4.1.1050.25.4.21.1.7
This entry shows the threshold setting (%) for a volume's usage.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

totalSysPartitionNum 1.3.6.1.4.1.1050.25.4.22
This entry shows the total number of NetWare partitions created in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysPartitionTable 1.3.6.1.4.1.1050.25.4.23
This entry is a table containing information about all NetWare partitions in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysPartitionEntry

sysPartitionEntry 1.3.6.1.4.1.1050.25.4.23.1
This entry contains information about each NetWare partition.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SysPartitionEntry  

sysPartitionNum 1.3.6.1.4.1.1050.25.4.23.1.1
This entry shows the system partition number assigned by the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

partitionDiskNum 1.3.6.1.4.1.1050.25.4.23.1.2
This entry shows the disk number from which this partition is created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dataAreaSize 1.3.6.1.4.1.1050.25.4.23.1.3
This entry shows the size of the partition's data area in sectors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

redirectionAreaSize 1.3.6.1.4.1.1050.25.4.23.1.4
This entry shows the size of the partition's redirection area in sectors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

redirectedSize 1.3.6.1.4.1.1050.25.4.23.1.5
This entry shows the number of sectors used in the partition's redirection area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

partitionName 1.3.6.1.4.1.1050.25.4.23.1.6
This entry shows the partition name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

softPollingInterval 1.3.6.1.4.1.1050.25.4.27
This entry shows the soft polling interval in seconds. By soft polling, it means that the Agent polls the system status (CPU Utilization, Memory Utilization, Volume Utilization and NIC Statistic Counters) based on a specified interval. Default is 1 second.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

glbThldVolUtil 1.3.6.1.4.1.1050.25.4.28
This entry shows the global threshold value (%) for volume or file system utilization. Default is 100%.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

numberOfCpu 1.3.6.1.4.1.1050.25.4.29
This entry shows the number of CPUs in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpuInfoTable 1.3.6.1.4.1.1050.25.4.30
This entry is a table containing information about all CPUs on the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CpuInfo

cpuInfo 1.3.6.1.4.1.1050.25.4.30.1
This entry shows information about each CPU.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CpuInfo  

cpuNum 1.3.6.1.4.1.1050.25.4.30.1.1
This entry shows the CPU number starting at 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpuUtilization 1.3.6.1.4.1.1050.25.4.30.1.2
This entry shows CPU utilization (%).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpuSystemUtilization 1.3.6.1.4.1.1050.25.4.30.1.9
This entry shows CPU utilization (%) by the operating system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpuUserUtilization 1.3.6.1.4.1.1050.25.4.30.1.10
This entry shows CPU utilization (%) by applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpuInterruptUtilization 1.3.6.1.4.1.1050.25.4.30.1.11
This entry shows CPU utilization (%) by the interrupt services.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmtStationAddrSignIn 1.3.6.1.4.1.1050.25.4.42
This entry is the sign-in IPX address of the management station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(11..12)  

mgmtStationAddrSignOut 1.3.6.1.4.1.1050.25.4.43
This entry is the sign-out IPX address of the management station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(10..12)  

serverTemp1Threshold 1.3.6.1.4.1.1050.25.4.44
This entry displays the first level threshold value for the system temperature. Values displayed have to be divided by ten (10) to show the temperature in degrees Celsius. For example, a reading of 305 means that the temperature is at 30.5 degrees Celsius.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

serverTemp2Threshold 1.3.6.1.4.1.1050.25.4.45
This entry displays the second level threshold value for the CPU temperature. Values displayed have to be divided by ten (10) to show the temperature in degrees Celsius. For example, a reading of 305 means that the temperature is at 30.5 degrees Celsius.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

serverCpuUtilizationThreshold 1.3.6.1.4.1.1050.25.4.46
This entry shows the threshold value (%) for the CPU utilization.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

hostIOBusUtilizationThreshold 1.3.6.1.4.1.1050.25.4.47
This entry displays the threshold value for bus utilization. Values displayed have to be divided by one hundred (100) to show the percentage of bus utilization. For example, a reading of 1234 means that bus utilization is at 12.34%.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

memoryUtilizedThreshold 1.3.6.1.4.1.1050.25.4.48
This entry shows the threshold value (%) for memory utilization.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

dmiInfo 1.3.6.1.4.1.1050.25.4.55
OBJECT IDENTIFIER    

biosVendor 1.3.6.1.4.1.1050.25.4.55.1
This entry displays the name of the BIOS vendor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

biosVersion 1.3.6.1.4.1.1050.25.4.55.2
This entry displays the BIOS version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

biosStartingAddressSegment 1.3.6.1.4.1.1050.25.4.55.3
This entry displays the segment location of the BIOS starting address, e.g. 0E800h.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

biosReleaseDate 1.3.6.1.4.1.1050.25.4.55.4
This entry displays the BIOS release date in mm/dd/yy format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

biosROMSize 1.3.6.1.4.1.1050.25.4.55.5
This entry displays the ROM size of the BIOS. Size is 64K*(n+1). 0=64K, 1=128K, 2=256K, etc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

biosCharacteristics1 1.3.6.1.4.1.1050.25.4.55.6
This entry displays the first 32 bits of BIOS characteristics. It defines which functions the BIOS supports. PCI, PCMCIA, Flash, etc. Bit 0 Reserved Bit 1 Reserved Bit 2 Unknown Bit 3 BIOS Characteristics Not Supported Bit 4 ISA is supported Bit 5 MCA is supported Bit 6 EISA is supported Bit 7 PCI is supported Bit 8 PCMCIA is supported Bit 9 Plug and Play is supported Bit 10 APM is supported Bit 11 BIOS is Upgradeable (Flash) Bit 12 BIOS shadowing is allowed Bit 13 VL-VESA is supported Bit 14 ESCD support is available Bit 15 Boot from CD is supported Bit 16 Selectable Boot is supported Bit 17 BIOS ROM is socketed Bit 18 Boot From PCMCIA is supported Bit 19 EDD (Enhanced Disk Drive) Specification is supported Bit 20 Int 13h - Japanese Floppy for NEC 9800 1.2mb (3.5 inch, 1k Bytes/Sector, 360 RPM) is supported Bit 21 Int 13h - Japanese Floppy for Toshiba 1.2mb (3.5 inch, 360 RPM) is supported Bit 22 Int 13h - 5.25 inch / 360 KB Floppy Services are supported Bit 23 Int 13h - 5.25 inch /1.2MB Floppy Services are supported Bit 24 Int 13h - 3.5 inch / 720 KB Floppy Services are supported Bit 25 Int 13h - 3.5 inch / 2.88 MB Floppy Services are supported Bit 26 Int 5h, Print Screen Service is supported Bit 27 Int 9h, 8042 Keyboard services are supported Bit 28 Int 14h, Serial Services are supported Bit 29 Int 17h, Printer Services are supported Bit 30 Int 10h, CGA Video Services are supported Bit 31 PC-98 Bits32:47 Reserved for BIOS Vendor Bits 48:63 Reserved for System Vendor
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

biosCharacteristics2 1.3.6.1.4.1.1050.25.4.55.7
This entry displays the second 32 bits of BIOS characteristics. It defines which functions the BIOS supports. PCI, PCMCIA, Flash, etc. Bit 0 Reserved Bit 1 Reserved Bit 2 Unknown Bit 3 BIOS Characteristics Not Supported Bit 4 ISA is supported Bit 5 MCA is supported Bit 6 EISA is supported Bit 7 PCI is supported Bit 8 PCMCIA is supported Bit 9 Plug and Play is supported Bit 10 APM is supported Bit 11 BIOS is Upgradeable (Flash) Bit 12 BIOS shadowing is allowed Bit 13 VL-VESA is supported Bit 14 ESCD support is available Bit 15 Boot from CD is supported Bit 16 Selectable Boot is supported Bit 17 BIOS ROM is socketed Bit 18 Boot From PCMCIA is supported Bit 19 EDD (Enhanced Disk Drive) Specification is supported Bit 20 Int 13h - Japanese Floppy for NEC 9800 1.2mb (3.5 inch, 1k Bytes/Sector, 360 RPM) is supported Bit 21 Int 13h - Japanese Floppy for Toshiba 1.2mb (3.5 inch, 360 RPM) is supported Bit 22 Int 13h - 5.25 inch / 360 KB Floppy Services are supported Bit 23 Int 13h - 5.25 inch /1.2MB Floppy Services are supported Bit 24 Int 13h - 3.5 inch / 720 KB Floppy Services are supported Bit 25 Int 13h - 3.5 inch / 2.88 MB Floppy Services are supported Bit 26 Int 5h, Print Screen Service is supported Bit 27 Int 9h, 8042 Keyboard services are supported Bit 28 Int 14h, Serial Services are supported Bit 29 Int 17h, Printer Services are supported Bit 30 Int 10h, CGA Video Services are supported Bit 31 PC-98 Bits32:47 Reserved for BIOS Vendor Bits 48:63 Reserved for System Vendor
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

siManufacturer 1.3.6.1.4.1.1050.25.4.55.8
This entry displays the manufacturer of this computer system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

siProductName 1.3.6.1.4.1.1050.25.4.55.9
This entry displays the name of this product.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

siVersion 1.3.6.1.4.1.1050.25.4.55.10
This entry displays the version number of this system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

siSerialNumber 1.3.6.1.4.1.1050.25.4.55.11
This entry displays the serial number of this system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

bbManufacturer 1.3.6.1.4.1.1050.25.4.55.12
This entry displays the base board manufacturer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

bbProductName 1.3.6.1.4.1.1050.25.4.55.13
This entry displays the base board product name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

bbVersion 1.3.6.1.4.1.1050.25.4.55.14
This entry displays the base board version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

bbSerialNumber 1.3.6.1.4.1.1050.25.4.55.15
This entry displays the base board serial number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mcErrorDetectingMethod 1.3.6.1.4.1.1050.25.4.55.16
This entry displays the supported error detection method of the memory controller. 01h : Other 02h : Unknown 03h : None 04h : 8-bit Parity 05h : 32-bit ECC 06h : 64-bit ECC 07h : 128-bit ECC
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mcErrorCorrectingCapability 1.3.6.1.4.1.1050.25.4.55.17
This entry displays the error correcting capability of the memory controller. Bit 0 : Other Bit 1 : Unknown Bit 2 : None Bit 3 : Single Bit Error Correcting Bit 4 : Double Bit Error Correcting Bit 5 : Error Scrubbing
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mcSupportedInterleave 1.3.6.1.4.1.1050.25.4.55.18
This entry displays the supported memory interleave of the memory controller. 01h : Other 02h : Unknown 03h : One Way Interleave 04h : Two Way Interleave 05h : Four Way Interleave 06h : Eight Way Interleave 07h : Sixteen Way Interleave
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mcCurrentInterleave 1.3.6.1.4.1.1050.25.4.55.19
This entry displays the current memory interleave of the memory controller. 01h : Other 02h : Unknown 03h : One Way Interleave 04h : Two Way Interleave 05h : Four Way Interleave 06h : Eight Way Interleave 07h : Sixteen Way Interleave
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mcMaximumMemoryModuleSize 1.3.6.1.4.1.1050.25.4.55.20
This entry displays the size of the largest memory module supported (per slot), specified as n, where 2^n is the maximum size in MB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mcSupportedSpeeds 1.3.6.1.4.1.1050.25.4.55.21
This entry displays the supported memory speeds of the memory controller. Bit 0 : Other Bit 1 : Unknown Bit 2 : 70ns Bit 3 : 60ns Bit 4 : 50ns Bit 5-15 : Reserved, must be zero
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mcSupportedMemoryTypes 1.3.6.1.4.1.1050.25.4.55.22
This entry displays the supported memory types of the memory controller. Bit 0 : Other Bit 1 : Unknown Bit 2 : Standard Bit 3 : Fast Page Mode Bit 4 : EDO Bit 5 : Parity Bit 6 : ECC Bit 7 : SIMM Bit 8 : DIMM Bit 9-15 : Reserved, must be zero
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mcMemoryModuleVoltage 1.3.6.1.4.1.1050.25.4.55.23
This entry describes the required voltages for each of the memory module sockets controlled by the controller: Bits 7:3 Reserved, must be zero Bit 2 2.9V Bit 1 3.3V Bit 0 5V NOTE: Setting of multiple bits indicates that sockets are configurable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mcNumberOfAssociatedMemorySlots 1.3.6.1.4.1.1050.25.4.55.24
This entry defines how many of the Memory Module Information blocks are controlled by the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

piNumberOfProcessorInfo 1.3.6.1.4.1.1050.25.4.55.25
This field shows the number of entries in the piProcessorInfoTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

piProcessorInfoTable 1.3.6.1.4.1.1050.25.4.55.52
This entry is a table containing information about all types of processors on the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PiProcessorInfo

piProcessorInfo 1.3.6.1.4.1.1050.25.4.55.52.1
This entry shows information about each processor.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PiProcessorInfo  

piSocketDesignation 1.3.6.1.4.1.1050.25.4.55.52.1.1
This entry displays the processor socket designation label on top of the base board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

piProcessorType 1.3.6.1.4.1.1050.25.4.55.52.1.2
This entry displays the processor type. 01H - other 02H - Unknown 03H - Central Processor 04H - Math Processor 05H - DSP Processor 06H - Video Processor
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

piProcessorFamily 1.3.6.1.4.1.1050.25.4.55.52.1.3
This entry displays the family to which this processor belongs to. 01H - other 02H - Unknown 03H - 8086 04H - 80286 05H - 80386 06H - 80486 07H - 8087 08H - 80287 09h - 80387 0AH - 80487 0BH - Pentium Family 0CH-11H - Reserved for specific Pentium versions 12H - M1 Family 13H-18H - Reserved for specific M1 versions 19H - K5 Family 1AH-1FH - Reserved for specific K5 versions 0CH - Future X86 Class CPUs 0DH - OverDrive Family
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

piProcessorManufacturer 1.3.6.1.4.1.1050.25.4.55.52.1.4
This entry displays the processor's manufacturer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

piProcessorID 1.3.6.1.4.1.1050.25.4.55.52.1.5
This entry displays specific information which describes the processor's features. For x86 class CPUs. the field's format depends on the processor's support of the CPUID instruction. If the instruction is supported, the processor ID field contains 2 DWORD-formatted values. The first(offsets 08h - 0Bh)is the EAX value returned by a CPUID instruction with input EAX set to 1; the second(offset 0Ch-0Fh) is the EDX value returned by that instruction. Otherwise, only the first 2 bytes of the processor ID field are significant and contain the contents of the DX register at CPU reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

piProcessorVersion 1.3.6.1.4.1.1050.25.4.55.52.1.6
This entry displays the processor version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

piVoltage 1.3.6.1.4.1.1050.25.4.55.52.1.7
This entry shows the processor's voltage requirement. Bits 7:4 Reserved, must be zero Bits 3:0 Voltage Capability. A Set bit indicates the voltage is supported. Bit 0 - 5V Bit 1 - 3.3V Bit 2 - 2.9V Bit 3 - Reserved, must be zero. Note: Setting of multiple bits indicates the socket is configurable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

piExternalClock 1.3.6.1.4.1.1050.25.4.55.52.1.8
This entry shows the processor's external clock frequency in MHz. If the value is unknown, the field is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

piMaxSpeed 1.3.6.1.4.1.1050.25.4.55.52.1.9
This entry shows the processor's maximum speed in MHz. If the value is unknown, the field is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

piCurrentSpeed 1.3.6.1.4.1.1050.25.4.55.52.1.10
This entry shows the processor's current speed in MHz. If the value is unknown, the field is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

piStatus 1.3.6.1.4.1.1050.25.4.55.52.1.11
This entry shows the status of this processor. Bit 6 CPU socket populated. 1 - CPU Socket Populated. 0 - CPU Socket Unpopulated. Bits 2:0 CPU Status 0h - Unknown 1h - CPU Enabled 2h - CPU disabled by user 3h - CPU disabled by system BIOS 4h - CPU is idle 5-6h Reserved 7h - Other
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

piProcessorUpgrade 1.3.6.1.4.1.1050.25.4.55.52.1.12
This entry shows the processor upgrade method. 01h - other 02h - unknown 03h - daughter board 04h - ZIF socket 05h - replaceable piggy back 06h - None 07h - LIF socket
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mmNumberOfMemoryModuleInfo 1.3.6.1.4.1.1050.25.4.55.26
This entry shows the number of entries in the mmMemoryModuleInfoTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mmMemoryModuleInfoTable 1.3.6.1.4.1.1050.25.4.55.53
This entry is a table containing information about all memory module sockets
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MmMemoryModuleInfo

mmMemoryModuleInfo 1.3.6.1.4.1.1050.25.4.55.53.1
This entry shows information about each memory module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MmMemoryModuleInfo  

mmSocketDesignation 1.3.6.1.4.1.1050.25.4.55.53.1.1
This entry shows the memory socket designation labels on top of the base board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mmBankConnections 1.3.6.1.4.1.1050.25.4.55.53.1.2
This entry shows the socket to which a memory module is installed. It is a single byte value, in this byte each nibble indicates a bank(RAS#) connection, 0xF means no connection. Example: If banks 1 & 3 (RAS# 1 & 3) were connected to a SIMM socket the byte for that socket would be 13h. If only bank 2 (RAS 2) were connected the byte for that socket would be 2Fh.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mmCurrentSpeed 1.3.6.1.4.1.1050.25.4.55.53.1.3
This entry shows the speed of the memory module, , in ns (e.g. 70d for a 70ns module). If the speed is unknown, the field is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mmCurrentMemoryType 1.3.6.1.4.1.1050.25.4.55.53.1.4
This entry shows the type of memory module currently installed: Bit 0 - other Bit 1 - unknown Bit 2 - Standard Bit 3 - Fast Page Mode Bit 4 - EDO Bit 5 - Parity Bit 6 - ECC Bit 7 - SIMM Bit 8 - DIMM Bit 9:15 Reserved, must be 0
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mmInstalledSize 1.3.6.1.4.1.1050.25.4.55.53.1.5
This entry shows the installed memory size. Bits 0 - 6 represent the size(n), where 2^n is the size in MB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mmEnabledSize 1.3.6.1.4.1.1050.25.4.55.53.1.6
This entry shows the enabled memory size. Bits 0 - 6 represent the size(n), where 2^n is the size in MB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mmErrorStatus 1.3.6.1.4.1.1050.25.4.55.53.1.7
This entry shows the memory error status. Bit 1 - Correctable errors received for the module Bit 0 - Uncorrectable errors received for the module
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ciNumberOfCacheInfo 1.3.6.1.4.1.1050.25.4.55.27
This field shows the number of entries in the ciCacheInfoTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ciCacheInfoTable 1.3.6.1.4.1.1050.25.4.55.54
This entry is a table containing information about CPU cache devices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CiCacheInfo

ciCacheInfo 1.3.6.1.4.1.1050.25.4.55.54.1
This entry shows information about each CPU cache device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CiCacheInfo  

ciSocketDesignation 1.3.6.1.4.1.1050.25.4.55.54.1.1
This entry shows the cache socket designation labels on top of the base board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ciCacheConfiguration 1.3.6.1.4.1.1050.25.4.55.54.1.2
This entry shows the configuration of this cache module. Bits 15:10 - Reserved, must be 0 Bits 9:8 - Operational Mode: 00b - Write through 01b - Write back 10b - Varies with memory address 11b - Unknown Bit 7 - Enabled/Disabled 1b - Enabled 0b - Disabled Bits 6:5 - Location 00b - Internal 01b - External 10b - Reserved 11b - Unknown Bit 4 - Reserved Bit 3 - Cache Socketed 1b - Socketed 0b - Not socketed Bits 2:0 - Cache Level
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ciMaximumCacheSize 1.3.6.1.4.1.1050.25.4.55.54.1.3
This entry shows the maximum cache size that can be installed. Bits 14:0 : Max. size in given granularity Bit 15 Granularity : 0 = 1K granularity 1 = 64K granularity
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ciInstalledSize 1.3.6.1.4.1.1050.25.4.55.54.1.4
This entry shows the installed cache size. Bits 14:0 : Max. size in given granularity Bit 15 Granularity : 0 = 1K granularity 1 = 64K granularity
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ciSupportedSRAMType 1.3.6.1.4.1.1050.25.4.55.54.1.5
This entry shows the supported SRAM type. Bit 0 - Other Bit 1 - Unknown Bit 2 - Nonburst Bit 3 - Burst Bit 4 - Pipeline Burst Bit 5 - Synchronous Bit 6 - Asynchronous Bits7:15 Reserved
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ciCurrentSRAMType 1.3.6.1.4.1.1050.25.4.55.54.1.6
This entry shows the current SRAM type. Bit 0 - Other Bit 1 - Unknown Bit 2 - Nonburst Bit 3 - Burst Bit 4 - Pipeline Burst Bit 5 - Synchronous Bit 6 - Asynchronous Bits7:15 Reserved
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pcNumberOfPortConnectorInfo 1.3.6.1.4.1.1050.25.4.55.28
This field shows the number of entries in the pcPortConnectorInfoTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pcPortConnectorInfoTable 1.3.6.1.4.1.1050.25.4.55.55
This entry is a table containing information about all port connectors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PcPortConnectorInfo

pcPortConnectorInfo 1.3.6.1.4.1.1050.25.4.55.55.1
This entry shows information about each port connector.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PcPortConnectorInfo  

pcInternalReferenceDesignator 1.3.6.1.4.1.1050.25.4.55.55.1.1
This entry shows the internal reference designation labels on top of the base board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

pcInternalConnectorType 1.3.6.1.4.1.1050.25.4.55.55.1.2
This entry shows the internal connector type. 00h - None 01h - Centronics 02h - Mini Centronics 03h - Proprietary 04h - DB25 pin male 05h - DB25 pin female 06h - DB15 pin male 07h - DB15 pin female 08h - DB9 pin male 09h - DB9 pin female 0Ah - RJ-11 0Bh - RJ-45 0Ch - 50 pin Mini SCSI 0Dh - Mini DIN 0Eh - Micro DIN 0Fh - PS/2 10h - Infrared 11h - HP-HIL 12h - Access BUS 13h - SSA SCSI 14h - Circular DIN-8 male 15h - Circular DIN-8 female 16h - On board IDE 17h - On board floppy 18h - 9 pin dual Inline 19h - 25 pin dual Inline 1Ah - 50 pin dual Inline 1Bh - 68 pin dual Inline 1Ch - On board sound input for CD-ROM 1Dh - Mini Centronics Type 14 1Eh - Mini Centronics Type 26 A0h - PC98 A1h - PC98 Hireso A2h - PC H98 A3h - PC98 Note A4h - PC 98 Full FFh - Other
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pcExternalReferenceDesignator 1.3.6.1.4.1.1050.25.4.55.55.1.3
This entry shows the external reference designation labels on top of the base board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

pcExternalConnectorType 1.3.6.1.4.1.1050.25.4.55.55.1.4
This entry shows the external connector type. 00h - None 01h - Centronics 02h - Mini Centronics 03h - Proprietary 04h - DB25 pin male 05h - DB25 pin female 06h - DB15 pin male 07h - DB15 pin female 08h - DB9 pin male 09h - DB9 pin female 0Ah - RJ-11 0Bh - RJ-45 0Ch - 50 pin Mini SCSI 0Dh - Mini DIN 0Eh - Micro DIN 0Fh - PS/2 10h - Infrared 11h - HP-HIL 12h - Access BUS 13h - SSA SCSI 14h - Circular DIN-8 male 15h - Circular DIN-8 female 16h - On board IDE 17h - On board floppy 18h - 9 pin dual Inline 19h - 25 pin dual Inline 1Ah - 50 pin dual Inline 1Bh - 68 pin dual Inline 1Ch - On board sound input for CD-ROM 1Dh - Mini Centronics Type 14 1Eh - Mini Centronics Type 26 A0h - PC98 A1h - PC98 Hireso A2h - PC H98 A3h - PC98 Note A4h - PC98 Full FFh - Other
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pcPortType 1.3.6.1.4.1.1050.25.4.55.55.1.5
This entry shows the port type 00h - None 01h - Parallel Port XT/AT Compatible 02h - Parallel Port PS/2 03h - Parallel Port ECP 04h - Parallel Port EPP 05h - Parallel Port ECP/EPP 06h - Serial Port XT/AT Compatible 07h - Serial Port 16450 Compatible 08h - Serial Port 16650 Compatible 09h - Serial Port 16650A Compatible 0Ah - SCSI Port 0Bh - MIDI Port 0Ch - Joy stick port 0Dh - Keyboard Port 0Eh - Mouse Port 0Fh - SSA SCSI 10h - USB 11h - FireWire 12h - PCMCIA Type I 13h - PCMCIA Type II 14h - PCMCIA Type III 15h - Cardbus 16h - Access Bus Port 17h - SCSI II 18h - SCSI Wide 19h - PC-98 1Ah - PC-98 Hireso 1Bh - OC-H98 A0h - 8251 Compatible A1h - 8251 FIFO Compatible FFh - Other
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ssNumberOfSystemSlotInfo 1.3.6.1.4.1.1050.25.4.55.29
This field shows the number of entries in ssSystemSlotInfoTable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ssSystemSlotInfoTable 1.3.6.1.4.1.1050.25.4.55.56
This entry is a table containing information about all system slots.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SsSystemSlotInfo

ssSystemSlotInfo 1.3.6.1.4.1.1050.25.4.55.56.1
This entry shows information about each system slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SsSystemSlotInfo  

ssSlotDesignation 1.3.6.1.4.1.1050.25.4.55.56.1.1
This entry shows the slot designation label on top of the base board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ssSlotType 1.3.6.1.4.1.1050.25.4.55.56.1.2
This entry shows the slot type. 01h - Other 02h - Unknown 03h - ISA 04h - MCA 05h - EISA 06h - PCI 07h - PCMCIA 08h - VL VESA 09h - Proprietary 0Ah - Processor Card Slot 0Bh - Proprietary Memory Card 0Ch - I/O Riser Card Slot 0Dh - NuBus 0Eh - PCI- 66MHz Capable A0h - PC98/C20 A1h - PC98/C24 A2h - PC98/E A3h - PC98/Local Bus A4h - PC98/Card
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ssSlotDataBusWidth 1.3.6.1.4.1.1050.25.4.55.56.1.3
This entry shows the width of the data bus. 01h - Other 02h - Unknown 03h - 8bit 04h - 16bit 05h - 32bit 06h - 64bit 07h - 128bit
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ssCurrentUsage 1.3.6.1.4.1.1050.25.4.55.56.1.4
This entry shows the current usage of this slot. 01h - Other 02h - Unknown 03h - Available 04h - In use
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ssSlotLength 1.3.6.1.4.1.1050.25.4.55.56.1.5
This entry shows the length of the slot. 01h - Other 02h - Unknown 03h - Half Length 04h - Full Length
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ssSlotID 1.3.6.1.4.1.1050.25.4.55.56.1.6
This entry shows the slot ID. MCA - Logical Micro Channel slot number EISA - Logical EISA slot number PCI - The value present in the slot number field of the PCI interrupt routing table entry that is associated with the slot. PCMCIA- Identifies the adapter number and socket number to be passed to PCMCIA socket services to identify this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ssSlotCharacteristics 1.3.6.1.4.1.1050.25.4.55.56.1.7
This entry shows the characteristics of this slot. Bit 0 - Unknown Bit 1 - Provide 5.0 Volts Bit 2 - Provide 3.3 Volts Bit 1 - Slot's opening is shared with another slot, e.g. PCI/EISA shared slot Bits 4:7 - Reserved
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

obNumberOfOnBoardDeviceInfo 1.3.6.1.4.1.1050.25.4.55.30
This field shows the number of entries in the obOnBoardDeviceInfoTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

obOnBoardDeviceInfoTable 1.3.6.1.4.1.1050.25.4.55.57
This entry is a table containing information about all on board devices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ObOnBoardDeviceInfo

obOnBoardDeviceInfo 1.3.6.1.4.1.1050.25.4.55.57.1
This entry shows information about each on board device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ObOnBoardDeviceInfo  

obDeviceType 1.3.6.1.4.1.1050.25.4.55.57.1.1
This entry shows the device type. 01H - Other 02H - Unknown 03H - Video 04H - SCSI 05H - Ethernet 06H - Token Ring 07H - Sound
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

obDescription 1.3.6.1.4.1.1050.25.4.55.57.1.2
This entry shows the description of the on board device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

oemNumberOfOEMString 1.3.6.1.4.1.1050.25.4.55.31
This field shows the number of entries in the oemStringTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

oemStringTable 1.3.6.1.4.1.1050.25.4.55.58
This entry is a table showing OEM defined strings.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OemStrings

oemStrings 1.3.6.1.4.1.1050.25.4.55.58.1
This entry shows information about each OEM string.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OemStrings  

oemString 1.3.6.1.4.1.1050.25.4.55.58.1.1
This entry is an individual OEM string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smNumberOfEventLog 1.3.6.1.4.1.1050.25.4.55.32
This field shows the number of entries in the smEventLogTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

smEventLogSupport 1.3.6.1.4.1.1050.25.4.55.33
This entry shows if BIOS supports System Event Log function: 0 = NO else = YES
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

smEventLogTotalSize 1.3.6.1.4.1.1050.25.4.55.34
This entry shows the total size of event log data area in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

smEventLogUsedSize 1.3.6.1.4.1.1050.25.4.55.35
This entry shows the used size of event log data area in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

smEventLogUtilizationThreshold 1.3.6.1.4.1.1050.25.4.55.36
This entry shows the threshold value (%) for event log data area utilization.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

smEventLogTable 1.3.6.1.4.1.1050.25.4.55.59
This entry is a table of event log entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SmEventLogEntry

smEventLogEntry 1.3.6.1.4.1.1050.25.4.55.59.1
This entry contains information about each logged event.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SmEventLogEntry  

smLogTime 1.3.6.1.4.1.1050.25.4.55.59.1.1
This entry shows the event log time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

smLogType 1.3.6.1.4.1.1050.25.4.55.59.1.2
This entry shows the event log type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

smLogDescription 1.3.6.1.4.1.1050.25.4.55.59.1.3
This entry shows the event log description.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

numberOfIPAddress 1.3.6.1.4.1.1050.25.4.56
This entry shows the number of IP addresses assigned to this server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ipAddressTable 1.3.6.1.4.1.1050.25.4.57
This entry is a table showing the IP addresses assigned to this server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpAddresses

ipAddresses 1.3.6.1.4.1.1050.25.4.57.1
This entry shows information about each IP address assigned to this server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddresses  

ipAddress 1.3.6.1.4.1.1050.25.4.57.1.1
This entry is the individual IP address assigned to this server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ipxAddress 1.3.6.1.4.1.1050.25.4.58
This entry is the internal IPX address assigned to this server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(10)  

numberOfLoginUser 1.3.6.1.4.1.1050.25.4.59
This field shows the number of entries in the loginUserTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

loginUserTable 1.3.6.1.4.1.1050.25.4.60
This entry is a table containing information about all logged in users.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LoginUser

loginUser 1.3.6.1.4.1.1050.25.4.60.1
This entry shows information about each logged in user.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LoginUser  

loginUserName 1.3.6.1.4.1.1050.25.4.60.1.1
This entry shows the logged in user's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

loginTime 1.3.6.1.4.1.1050.25.4.60.1.2
This entry shows the user's login time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

numberOfDriverLoaded 1.3.6.1.4.1.1050.25.4.61
This field shows the number of entries in the driverLoadedTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

driverLoadedTable 1.3.6.1.4.1.1050.25.4.62
This entry is a table containing information about all software (including drivers) currently running on the server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DriverLoaded

driverLoaded 1.3.6.1.4.1.1050.25.4.62.1
This entry contains information about each software running on the server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DriverLoaded  

driverName 1.3.6.1.4.1.1050.25.4.62.1.1
This entry shows the name of the software running on the server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

driverDescription 1.3.6.1.4.1.1050.25.4.62.1.2
This entry shows a description of the software running on the server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

performance 1.3.6.1.4.1.1050.25.4.63
OBJECT IDENTIFIER    

numberOfPageIn 1.3.6.1.4.1.1050.25.4.63.1
This entry shows the number of page-ins during the last sampling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

byteOfPageIn 1.3.6.1.4.1.1050.25.4.63.2
This entry shows the number of page-in bytes during the last sampling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfPageOut 1.3.6.1.4.1.1050.25.4.63.3
This entry shows the number of page-out during the last sampling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

byteOfPageOut 1.3.6.1.4.1.1050.25.4.63.4
This entry shows the number of page-out bytes during the last sampling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfPageFault 1.3.6.1.4.1.1050.25.4.63.5
This entry shows the total number of page-faults during the last sampling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskCacheReadHitRatio 1.3.6.1.4.1.1050.25.4.63.6
This entry shows the ratio of disk cache read hits in the last sampling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskCacheWriteHitRatio 1.3.6.1.4.1.1050.25.4.63.7
This entry shows the ratio of disk cache write hits in the last sampling
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfFreeMem 1.3.6.1.4.1.1050.25.4.63.8
This entry shows the number of 4KB pages available to user processes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfTotalSwap 1.3.6.1.4.1.1050.25.4.63.9
This entry shows the total number of physical disk (512-byte) blocks available for swapping and paging
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfFreeSwap 1.3.6.1.4.1.1050.25.4.63.10
This entry shows the free number of physical disk (512-byte) blocks available for swapping and paging
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfSwapIn 1.3.6.1.4.1.1050.25.4.63.11
This entry shows the number of transfers from swap into memory per second
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfSwapInPages 1.3.6.1.4.1.1050.25.4.63.12
This entry shows the number of 4KB pages transfers from swap into memory per second
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfSwapOut 1.3.6.1.4.1.1050.25.4.63.13
This entry shows the number of transfers from memory into swap per second. If this value is greater than zero, you may need to increase the amount of memory or reduce the number of buffers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfSwapOutPages 1.3.6.1.4.1.1050.25.4.63.14
This entry shows the number of 4KB pages transfers from memory into swap per second
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfContextSwitch 1.3.6.1.4.1.1050.25.4.63.15
This entry shows the number of context switch per second
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ntPerf 1.3.6.1.4.1.1050.25.4.65
OBJECT IDENTIFIER    

systemPerf 1.3.6.1.4.1.1050.25.4.65.1
OBJECT IDENTIFIER    

cachePerf 1.3.6.1.4.1.1050.25.4.65.2
OBJECT IDENTIFIER    

memoryPerf 1.3.6.1.4.1.1050.25.4.65.3
OBJECT IDENTIFIER    

physicalDiskPerfTbl 1.3.6.1.4.1.1050.25.4.65.5
This entry is a table containing the performance counters of physical disk drives.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PhysicalDiskPerf

logicalDiskPerfTbl 1.3.6.1.4.1.1050.25.4.65.6
This entry is a table containing the performance counters of logical disk drives.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LogicalDiskPerf

processorTime 1.3.6.1.4.1.1050.25.4.65.1.1
This entry is the average percentage of time all the processors on the system are busy to execute non-idle threads.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

privilegedTime 1.3.6.1.4.1.1050.25.4.65.1.2
This entry is the average percentage of time spent in Privileged mode by all processors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

userTime 1.3.6.1.4.1.1050.25.4.65.1.3
This entry is the average percentage of time spent in User mode by all processors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

interruptTime 1.3.6.1.4.1.1050.25.4.65.1.4
This entry is the average percentage of the Interrupt Time of all processors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

interruptsPerSec 1.3.6.1.4.1.1050.25.4.65.1.5
This entry is the hardware interrupts received and serviced by the system per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

contextSwitchesPerSec 1.3.6.1.4.1.1050.25.4.65.1.6
This entry is the context switches from one thread to another per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

exceptionDispatchesPerSec 1.3.6.1.4.1.1050.25.4.65.1.7
This entry is the exceptions dispatched by the system per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

systemCallsPerSec 1.3.6.1.4.1.1050.25.4.65.1.8
This entry is the calls to Windows NT system service routines per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fileControlOpsPerSec 1.3.6.1.4.1.1050.25.4.65.1.9
This entry is all file system operations that are neither reads nor writes per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fileControlBytesPerSec 1.3.6.1.4.1.1050.25.4.65.1.10
This entry is bytes transferred for all file system operations that are neither reads nor writes per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fileDataOpsPerSec 1.3.6.1.4.1.1050.25.4.65.1.11
This entry is the read and write operations to file system devices per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fileReadOpsPerSec 1.3.6.1.4.1.1050.25.4.65.1.12
This entry is the read operations of all the file system per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fileWriteOpsPerSec 1.3.6.1.4.1.1050.25.4.65.1.13
This entry is the number of write operations of all the file system per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fileReadBytesPerSec 1.3.6.1.4.1.1050.25.4.65.1.14
This entry is the bytes transferred for all the file system read operations per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fileWriteBytesPerSec 1.3.6.1.4.1.1050.25.4.65.1.15
This entry is the bytes transferred for all the file system write operations per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

copyReadsHitRatio 1.3.6.1.4.1.1050.25.4.65.2.1
This entry is the percentage of Cache Copy Read requests that hit the cache.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

copyReadsPerSec 1.3.6.1.4.1.1050.25.4.65.2.2
This entry is the number of copy reads per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dataMapHitRatio 1.3.6.1.4.1.1050.25.4.65.2.3
This entry is the percentage of Data Maps in the cache.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

dataMapsPerSec 1.3.6.1.4.1.1050.25.4.65.2.4
This entry is the frequency (per second) that a file system maps a page of a file into the cache to read the page.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dataFlushesPerSec 1.3.6.1.4.1.1050.25.4.65.2.5
This entry is the frequency (per second) that the cache has flushed its contents to disk. More than one page can be transferred on each flush operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dataFlushPagesPerSec 1.3.6.1.4.1.1050.25.4.65.2.6
This entry is the number of pages per second the cache has flushed to disk. More than one page can be transferred on each flush operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lazeWriteFlushesPerSec 1.3.6.1.4.1.1050.25.4.65.2.7
This entry is the frequency (per second) that the cache's Lazy Write thread has written to disk. More than one page can be transferred on each write operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lazeWritePagesPerSec 1.3.6.1.4.1.1050.25.4.65.2.8
This entry is the frequency (per second) the cache's Lazy Write thread has written to disk. More than one page can be transferred on a single disk write operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pageFaultsPerSec 1.3.6.1.4.1.1050.25.4.65.3.1
This entry is the number of page faults per second in the processor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

transitionFaultsPerSec 1.3.6.1.4.1.1050.25.4.65.3.2
This entry is the number of page faults resolved per second by recovering pages that were in transition. The pages were recovered without additional disk activity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

writeCopiesPerSec 1.3.6.1.4.1.1050.25.4.65.3.3
This entry is the number of page faults per second that have been satisfied by making a copy of a page when an attempt to write to the page is made.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pageReadPerSec 1.3.6.1.4.1.1050.25.4.65.3.4
This entry is the number of times the disk was read per second to retrieve pages of virtual memory necessary to resolve page faults. Multiple pages can be read during a disk read operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pageWritePerSec 1.3.6.1.4.1.1050.25.4.65.3.5
This entry is the number of times per second that pages have been written to the disk. Each such write operation may transfer a number of pages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pagesInputPerSec 1.3.6.1.4.1.1050.25.4.65.3.6
This entry is the number of pages read per second from the disk to resolve memory references to pages. This counter includes paging traffic on behalf of the system cache to access file data for applications.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pagesOutputPerSec 1.3.6.1.4.1.1050.25.4.65.3.7
This entry is the number of pages written to the disk per second because the pages have been modified in main memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

pagesPerSec 1.3.6.1.4.1.1050.25.4.65.3.8
This entry is the number of pages read from or written to the disk per second to resolve memory references to pages that were not in memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

systemCodeBytes 1.3.6.1.4.1.1050.25.4.65.3.9
This entry is the number of pagable bytes of System Code Total Bytes currently resident in core memory. There is another ~300k bytes of non-paged kernel code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

systemDriverBytes 1.3.6.1.4.1.1050.25.4.65.3.10
This entry is the number of pagable bytes of System Driver Total Bytes currently resident in core memory. There is another ~700k bytes of non-paged driver code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

physicalDiskPerf 1.3.6.1.4.1.1050.25.4.65.5.1
This entry contains information about each performance counter of a physical disk drive.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PhysicalDiskPerf  

physicalDiskId 1.3.6.1.4.1.1050.25.4.65.5.1.1
This entry is the index for physical disk drives starting from 1. A 0 value will report an average value of all physical disk drives.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

avgBytesPerRead 1.3.6.1.4.1.1050.25.4.65.5.1.2
This entry is the average number of bytes transferred from the disk during read operations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

avgBytesPerWrite 1.3.6.1.4.1.1050.25.4.65.5.1.3
This entry is the average number of bytes transferred to the disk during write operations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

avgBytesPerTransfer 1.3.6.1.4.1.1050.25.4.65.5.1.4
This entry is the average number of bytes transferred to or from the disk during write or read operations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

avgSecPerRead 1.3.6.1.4.1.1050.25.4.65.5.1.5
This entry is the average time in seconds of a read of data from the disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

avgSecPerWrite 1.3.6.1.4.1.1050.25.4.65.5.1.6
This entry is the average time in seconds of a write of data to the disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

avgSecPerTransfer 1.3.6.1.4.1.1050.25.4.65.5.1.7
This entry is the time in seconds of the average disk transfer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskReadBytesPerSec 1.3.6.1.4.1.1050.25.4.65.5.1.8
This entry is the number of bytes transferred from the disk during read operations per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskWriteBytesPerSec 1.3.6.1.4.1.1050.25.4.65.5.1.9
This entry is the number of bytes transferred to the disk during write operations per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskBytesPerSec 1.3.6.1.4.1.1050.25.4.65.5.1.10
This entry is the number of bytes transferred to or from the disk during write or read operations per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskReadPerSec 1.3.6.1.4.1.1050.25.4.65.5.1.11
This entry is the number of read operations on the disk per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskWritePerSec 1.3.6.1.4.1.1050.25.4.65.5.1.12
This entry is the number of write operations on the disk per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskTransferPerSec 1.3.6.1.4.1.1050.25.4.65.5.1.13
This entry is the number of read and write operations on the disk per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

logicalDiskPerf 1.3.6.1.4.1.1050.25.4.65.6.1
This entry contains information about each performance counter of a logical disk drive.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  LogicalDiskPerf  

logicalDiskId 1.3.6.1.4.1.1050.25.4.65.6.1.1
This entry is the index for logical disk drives starting from 1. A 0 value will report an average value of all physical disk drives.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lavgBytesPerRead 1.3.6.1.4.1.1050.25.4.65.6.1.2
This entry is the average number of bytes transferred from the disk during read operations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lavgBytesPerWrite 1.3.6.1.4.1.1050.25.4.65.6.1.3
This entry is the average number of bytes transferred to the disk during write operations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lavgBytesPerTransfer 1.3.6.1.4.1.1050.25.4.65.6.1.4
This entry is the average number of bytes transferred to or from the disk during write or read operations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lavgSecPerRead 1.3.6.1.4.1.1050.25.4.65.6.1.5
This entry is the average time in seconds of a read of data from the disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lavgSecPerWrite 1.3.6.1.4.1.1050.25.4.65.6.1.6
This entry is the average time in seconds of a write of data to the disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

lavgSecPerTransfer 1.3.6.1.4.1.1050.25.4.65.6.1.7
This entry is the time in seconds of the average disk transfer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ldiskReadBytesPerSec 1.3.6.1.4.1.1050.25.4.65.6.1.8
This entry is the number of bytes transferred from the disk during read operations per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ldiskWriteBytesPerSec 1.3.6.1.4.1.1050.25.4.65.6.1.9
This entry is the number of bytes transferred to the disk during write operations per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ldiskBytesPerSec 1.3.6.1.4.1.1050.25.4.65.6.1.10
This entry is the number of bytes transferred to or from the disk during write or read operations per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ldiskReadPerSec 1.3.6.1.4.1.1050.25.4.65.6.1.11
This entry is the number of read operations on the disk per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ldiskWritePerSec 1.3.6.1.4.1.1050.25.4.65.6.1.12
This entry is the number of write operations on the disk per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ldiskTransferPerSec 1.3.6.1.4.1.1050.25.4.65.6.1.13
This entry is the number of read and write operations on the disk per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

serverLocalTime 1.3.6.1.4.1.1050.25.4.66
This field shows the real local time on each server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

osType 1.3.6.1.4.1.1050.25.5.1
This entry displays the server's operating system: 0 = NetWare 1 = SCO UNIX 2 = Windows NT 3 = UnixWare
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER netWare(0), scoUnix(1), windowsNt(2), unixWare(3)  

asmHardware 1.3.6.1.4.1.1050.25.5.2
This shows whether or not the system supports ASM proprietary hardware: 0 = NO 1 = YES
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

asmDmiVersion 1.3.6.1.4.1.1050.25.5.3
This entry shows the Acer DMI BIOS version number: 0 = not supported 110 = version 1.1 200 = version 2.0
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

asmHW 1.3.6.1.4.1.1050.25.5.4
OBJECT IDENTIFIER    

numberOfFans 1.3.6.1.4.1.1050.25.5.4.1
This entry shows the number of fans installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfThermometers 1.3.6.1.4.1.1050.25.5.4.2
This entry shows the number of system thermometers installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfVoltages 1.3.6.1.4.1.1050.25.5.4.3
This entry shows the number of voltage sensors installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfBusCounters 1.3.6.1.4.1.1050.25.5.4.4
This entry shows the number of bus utilization counters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfCpuSlot 1.3.6.1.4.1.1050.25.5.4.10
This entry shows the number of CPU slots: 0 = unknown 1-8 = number of CPU slots.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

chassisIntrusion 1.3.6.1.4.1.1050.25.5.4.7
The status of chassis intrusion: -1 = Not supported, 0 = normal, 1 = abnormal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fuseStatus 1.3.6.1.4.1.1050.25.5.4.8
This entry displays the status of fuses. Each bit indicates separate status of one fuse, 1 is failed, 0 is noraml. If system has no fuse at all, the entry shows -1. bit0: Keyboard/Mouse fuse bit1: USB1 fuse bit2: USB2 fuse bit3: SCSI1 fuse bit4: SCSI2 fuse
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

redundantPowerSupplyStatus 1.3.6.1.4.1.1050.25.5.4.9
This entry displays the status of redundant power subsystem. If system has no such equipment installed, bit31 of this value will be set to 1. Bit 0: power supply 1 status, 1=OK Bit 1: power supply 2 status, 1=OK Bit 2: power supply 1 fan status, 1=OK Bit 3: power supply 2 fan status, 1=OK Bit 4: power supply 1 present, 1=YES Bit 5: power supply 2 present, 1=YES
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fanTable 1.3.6.1.4.1.1050.25.5.4.11
This entry is a table containing information about all fans.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FanInfo

fanInfo 1.3.6.1.4.1.1050.25.5.4.11.1
This entry contains information about each fan.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FanInfo  

fanLocation 1.3.6.1.4.1.1050.25.5.4.11.1.1
This entry shows the fan's location in the server system, e.g. 'CPU1', 'CPU2' or 'HOUSING'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanStatus 1.3.6.1.4.1.1050.25.5.4.11.1.2
This entry displays the fan's working status: 0=normal 1=abnormal. When the fan is not rotating or is not installed, the status will be considered abnormal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fanRPM 1.3.6.1.4.1.1050.25.5.4.11.1.3
This entry displays the fan's rotation speed in RPM. If the fan doesn't provide RPM information, the value will be -1.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

thermometerTable 1.3.6.1.4.1.1050.25.5.4.12
This entry is a table containing information about all system thermometers installed.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ThermometerInfo

thermometerInfo 1.3.6.1.4.1.1050.25.5.4.12.1
This entry contains information about each thermometer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ThermometerInfo  

thermometerLocation 1.3.6.1.4.1.1050.25.5.4.12.1.1
This entry shows the thermometer's location in the server system, e.g. 'CPU1', 'CPU2' or 'SYSTEM'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

thermometerDegree 1.3.6.1.4.1.1050.25.5.4.12.1.2
This entry displays the thermometer reading. Values displayed have to be divided by ten (10) to show the temperature in degrees Celsius. For example, a reading of 305 means that the temperature is at 30.5 degrees Celsius.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

voltageTable 1.3.6.1.4.1.1050.25.5.4.13
This entry is a table containing information about all voltage sensors installed.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VoltageInfo

voltageInfo 1.3.6.1.4.1.1050.25.5.4.13.1
This entry contains information about each voltage sensor.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VoltageInfo  

voltageLocation 1.3.6.1.4.1.1050.25.5.4.13.1.1
This entry shows the voltage sensor's location in the server system, e.g. 'CPU1', 'CPU2' or 'SYSTEM'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

currentVoltage 1.3.6.1.4.1.1050.25.5.4.13.1.2
This entry displays the current voltage reading in milli-volts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

validVoltage 1.3.6.1.4.1.1050.25.5.4.13.1.3
This entry displays the ideal voltage reading in milli-volts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

maxVoltage 1.3.6.1.4.1.1050.25.5.4.13.1.4
This entry displays the maximum safe operating voltage in milli-volts. If the voltage goes above this value, the system may not work properly.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

minVoltage 1.3.6.1.4.1.1050.25.5.4.13.1.5
This entry displays the minimum safe operating voltage in milli-volts. If the voltage goes below this value, the system may not work properly.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

busCounterTable 1.3.6.1.4.1.1050.25.5.4.14
This entry is a table containing information about all bus utilization counters installed.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BusCounterInfo

busCounterInfo 1.3.6.1.4.1.1050.25.5.4.14.1
This entry contains information about each bus utilization counter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BusCounterInfo  

busCounterLocation 1.3.6.1.4.1.1050.25.5.4.14.1.1
The system bus monitored by the counter e.g. 'PCI1', 'PCI2', 'EISA1' or 'EISA2'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

busUtilization 1.3.6.1.4.1.1050.25.5.4.14.1.2
This entry displays the bus utilization. Values displayed have to be divided by one hundred (100) to show the percentage of bus utilization. For example, a reading of 1234 means that bus utilization is at 12.34%.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cpuSlotStatus 1.3.6.1.4.1.1050.25.5.4.17
This entry is partitioned into nibbles, each shows status of one CPU slot: bit0: CPU is present bit1: CPU is enabled bit2: CPU error (IERR#, Thermtrip# issued).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

asmUPS 1.3.6.1.4.1.1050.25.5.4.5
This entry shows the UPS device condition: 1 = server with UPS device 0 = server without UPS device
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

asmUPSInfo 1.3.6.1.4.1.1050.25.5.4.15
OBJECT IDENTIFIER    

upsPower1Exist 1.3.6.1.4.1.1050.25.5.4.15.1
This entry shows the power supply condition: 1 = power supply #1 exists 0 = power supply #1 doesn't exist.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

upsPower2Exist 1.3.6.1.4.1.1050.25.5.4.15.2
This entry shows the power supply condition: 1 = power supply #2 exists 0 = power supply #2 doesn't exist.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

upsPower3Exist 1.3.6.1.4.1.1050.25.5.4.15.3
This entry shows the power supply condition: 1 = power supply #3 exists 0 = power supply #3 doesn't exist.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

upsPower1Status 1.3.6.1.4.1.1050.25.5.4.15.4
This entry shows the power supply condition: 0 = power supply #1 is abnormal 1 = power supply #1 is normal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

upsPower2Status 1.3.6.1.4.1.1050.25.5.4.15.5
This entry shows the power supply condition: 0 = power supply #2 is abnormal 1 = power supply #2 is normal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

upsPower3Status 1.3.6.1.4.1.1050.25.5.4.15.6
This entry shows the power supply condition: 0 = power supply #3 is abnormal 1 = power supply #3 is normal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

upsBatteryExist 1.3.6.1.4.1.1050.25.5.4.15.7
This entry shows the battery condition: 1 = battery exists 0 = battery doesn't exist.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

upsBatteryStatus 1.3.6.1.4.1.1050.25.5.4.15.8
This entry shows the power supply condition: 0 = power supply #3 is abnormal 1 = power supply #3 is normal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

upsACStatus 1.3.6.1.4.1.1050.25.5.4.15.9
This entry shows the AC power condition: 0 = AC power is abnormal 1 = AC power is normal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

upsFanStatus 1.3.6.1.4.1.1050.25.5.4.15.10
This entry shows the fan condition: 0 = power ups fan is abnormal 1 = power ups fan is normal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

asmAgentVersion 1.3.6.1.4.1.1050.25.5.5
This entry shows the ASM Agent version number: 120 = version 1.2, 200 = version 2.0, etc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

passwordProtected 1.3.6.1.4.1.1050.25.5.6
This entry shows if the ASM Agent requires password for SNMP Set: 1 = YES 0 = NO
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numberOfTrapTargets 1.3.6.1.4.1.1050.25.5.7
This entry shows the number of targets of SNMP Trap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

trapTargetTable 1.3.6.1.4.1.1050.25.5.8
This entry is a table containing information about all trap targets.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrapTargetInfo

trapTargetInfo 1.3.6.1.4.1.1050.25.5.8.1
This entry contains information about each trap target. Index starts at 0.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TrapTargetInfo  

targetAddress 1.3.6.1.4.1.1050.25.5.8.1.1
This entry shows the trap target's IP/IPX address in ASCII format. For example, 00ABCDEF:000000000001 for IPX 192.9.210.99 for IP
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rdmStatus 1.3.6.1.4.1.1050.25.5.9
This entry shows the status of RDM daughter board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RdmStatus  

healthStatus 1.3.6.1.4.1.1050.25.5.10
This entry shows the health status of system. Each bit indicates one health index
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4..8)  

fileTransferPortTCP 1.3.6.1.4.1.1050.25.5.11
TCP port of FTU deamon. -1=N/A
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fileTransferPortIPX 1.3.6.1.4.1.1050.25.5.12
IPX port of FTU deamon. -1=N/A
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fileCommand 1.3.6.1.4.1.1050.25.5.13
0 : Clear Event Log 1 : Update Asset Log 2 : Clear Statistics Log 3 : Start Statistics recording 4 : Stop Statistics recording
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER  

disableEventHandling 1.3.6.1.4.1.1050.25.5.14
If this object is set to non-zero, Agent won't handle any event and runs quietly.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

trapDescription 1.3.6.1.4.1.1050.25.7.1
This entry contains information about the last trap sent.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

eventNotificationTable 1.3.6.1.4.1.1050.25.7.2
This entry is a table containing all event notification settings.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EventNotification

eventNotification 1.3.6.1.4.1.1050.25.7.2.1
This entry contains information about each event notification setting.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  EventNotification  

asmEventType 1.3.6.1.4.1.1050.25.7.2.1.1
This entry shows the event type: 1 : Temperature Warning 2 : Temperature Critical 3 : ECC Memory 1-Bit-Error 4 : ECC Memory Multiple-Bit-Error 5 : Fan Stops 6 : Voltage Exceeds Safe Range 7 : CPU Utilization High 8 : BUS Utilization High 9 : Memory Utilization High 10: Volume or File System Utilization High 11: NIC Counters High
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

eventAction 1.3.6.1.4.1.1050.25.7.2.1.2
This entry describes the actions to be taken by the agent or station when a particular event occurs. Station Side: Bit 0 : Audio Alarm Bit 1 : Flash Title Bar Bit 2 : Warning Dialog Box Bit 3 : Pager Agent Side: Bit 16: Broadcasting a message to all login users Bit 17: Shutdown the server automatically. File system will first be flushed. Bit 19: Launch a user defined program
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

eventProgram 1.3.6.1.4.1.1050.25.7.2.1.3
This entry shows the command string used to launch a user defined program.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..120)  

eventPager 1.3.6.1.4.1.1050.25.7.2.1.4
This entry shows the pager string including telephone number and pager code.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

trapTemperatureWarning 1
The agent will send a trap of this type when temperatures exceed the first level threshold value.
TRAP-TYPE    

trapTemperatureCritical 2
The agent will send a trap of this type when temperatures exceed the second level threshold value.
TRAP-TYPE    

trapECC1BitError 3
The agent will send a trap of this type when an ECC 1-bit error occurs.
TRAP-TYPE    

trapECCMBitError 4
The agent will send a trap of this type when an ECC multiple-bit error occurs.
TRAP-TYPE    

trapFanStop 5
The agent will send a trap of this type when any fan stops functioning.
TRAP-TYPE    

trapVoltage 6
The agent will send a trap of this type when any voltage reading exceeds the safe operating range.
TRAP-TYPE    

trapCPUUtilization 7
The agent will send a trap of this type when percent CPU utilization exceeds the threshold value.
TRAP-TYPE    

trapBusUtilization 8
The agent will send a trap of this type when percent bus utilization exceeds the threshold value.
TRAP-TYPE    

trapMemoryUtilization 9
The agent will send a trap of this type when percent memory utilization exceeds the threshold value.
TRAP-TYPE    

trapVolumeUtilization 10
The agent will send a trap of this type when percent volume utilization exceeds the threshold value.
TRAP-TYPE    

trapNICCounter 11
The agent will send a trap of this type when any NIC statistical counter exceeds the threshold value.
TRAP-TYPE    

trapPSFail 12
The agent will send a trap of this type when any power supply fails.
TRAP-TYPE    

trapACFail 13
The agent will send a trap of this type when AC power fails.
TRAP-TYPE    

trapPowerFanFail 14
The agent will send a trap of this type when any power sub-system fan fails.
TRAP-TYPE    

trapBatteryFail 15
The agent will send a trap of this type when UPS battery fails.
TRAP-TYPE    

trapChassisIntrusion 16
The agent will send a trap of this type when chassis intrusion occurs.
TRAP-TYPE    

trapFuseFail 17
The agent will send a trap of this type when fuse failed.
TRAP-TYPE    

trapRPSFail 18
The agent will send a trap of this type when redundant power supply is failed.
TRAP-TYPE    

trapRPSFanFail 19
The agent will send a trap of this type when redundant power supply fan is failed.
TRAP-TYPE    

trapBiosEventLog 20
The agent will send a trap of this type when bios has new eventlog.
TRAP-TYPE    

trapBiosEventLogUtilization 21
The agent will send a trap of this type when bios eventlog utilization exceeds threshold.
TRAP-TYPE    

trapCPUAbnormal 22
The agent will send a trap of this type when CPU has internal error.
TRAP-TYPE    

trapAssetChange 23
The agent will send a trap of this type when asset is changed.
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor