AVENTAIL-SYSTEM-HEALTH-MIB

File: AVENTAIL-SYSTEM-HEALTH-MIB.mib (8068 bytes)

Imported modules

AVENTAIL-MIB SNMPv2-SMI

Imported symbols

aventail OBJECT-TYPE Integer32
NOTIFICATION-TYPE enterprises MODULE-IDENTITY

Defined Values

aventailSystemHealth 1.3.6.1.4.1.4331.2
This Aventail MIB provides System Health Info
MODULE-IDENTITY    

authenticatedUsers 1.3.6.1.4.1.4331.2.1
OBJECT IDENTIFIER    

connectionUtilization 1.3.6.1.4.1.4331.2.2
OBJECT IDENTIFIER    

cpuUtilization 1.3.6.1.4.1.4331.2.3
The current CPU percent utilization of the sum of \ CPUs on the single node.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

memoryTotalUtilization 1.3.6.1.4.1.4331.2.4
OBJECT IDENTIFIER    

ramUtilization 1.3.6.1.4.1.4331.2.4.1
The current virtual memory (RAM ) percentage being utilized.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

swapUtilization 1.3.6.1.4.1.4331.2.4.2
The current virtual memory (Swap) percentage being utilized.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

bandwidthUtilization 1.3.6.1.4.1.4331.2.5
OBJECT IDENTIFIER    

cpuCapacityWarning 1.3.6.1.4.1.4331.2.6
The heuristically determined percentage of cpu capacity \ utilization of a single node system has exceeded the 90% \ of the cpu capacity. This capacity is the cpuCapacityUtilization \ for single node systems.
Status: current Access: read-only
NOTIFICATION-TYPE    

memoryCapacityWarning 1.3.6.1.4.1.4331.2.7
The heuristically determined percentage of memory \ capacity utilization of a single node system has exceeded \ the 90% of the memory capacity. This capacity is the \ memoryCapacityUtilization for single node systems.
Status: current Access: read-only
NOTIFICATION-TYPE    

userLimitWarning 1.3.6.1.4.1.4331.2.8
Notification is generated if the concurrent number \ of authenticated users on single node system has reached \ the 90 % of the license capacity limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

currentlyLoggedIn 1.3.6.1.4.1.4331.2.1.1
Number of currently authenticated users serviced \ by AVPN , EW & NG
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

peakLoggedIn 1.3.6.1.4.1.4331.2.1.2
The maximum number of concurrent users \ serviced by AVPN , EW & NG this \ system has had since the last reset interval; \ where the reset interval is 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

maximumlicensedUsers 1.3.6.1.4.1.4331.2.1.3
The maximum number of concurrent users \ this system is licensed for.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

currentConnections 1.3.6.1.4.1.4331.2.2.1
The number concurrent connections being \ serviced by AVPN , EW & NG.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

peakConnections 1.3.6.1.4.1.4331.2.2.2
The maximum number of concurrent connections \ serviced by AVPN , EW & NG, this system has had \ since the last reset interval; where reset interval is 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

internalInterfaceCurrentThroughput 1.3.6.1.4.1.4331.2.5.1
The current SSL VPN throughput in Mega bits per \ second as measured on the internal interface of the node \ since the last reset interval; where reset interval is 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

internalInterfacePeakThroughput 1.3.6.1.4.1.4331.2.5.2
The peak SSL VPN InternalInterface throughput in Mega \ bits per second since the last reset interval; \ where reset interval is 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

externalInterfaceCurrentThroughput 1.3.6.1.4.1.4331.2.5.3
The current SSL VPN throughput in Mega bits per second \ as measured on the external interface of the node since \ the last reset interval; where reset interval is 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

externalInterfacePeakThroughput 1.3.6.1.4.1.4331.2.5.4
The peak SSL VPN ExternalInterface throughput in \ Mega bits per second since the last reset interval; \ where reset interval is 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

clusterlInterfaceCurrentThroughput 1.3.6.1.4.1.4331.2.5.5
The current SSL VPN ClusterInterface throughput in \ Mega bits per second since the last reset interval; \ where reset interval is 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

clusterInterfacePeakThroughput 1.3.6.1.4.1.4331.2.5.6
The peak SSL VPN ClusterInterface throughput in \ Mega bits per second since the last reset interval; \ where reset interval is 24 hours.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

logUtilization 1.3.6.1.4.1.4331.2.9
Percent of log file partition being utilized
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

logCapacityWarning 1.3.6.1.4.1.4331.2.100
The percentage of log file disk space of a single \ node system has exceeded the 90% of the total \ capacity.
Status: current Access: read-only
NOTIFICATION-TYPE    

userLimitReached 1.3.6.1.4.1.4331.2.102
The concurrent number of authenticated users on \ a single node system has reached \ the current license capacity limit for authorized users. \ This capacity is the currentlyLoggedIn on the single node systems.
Status: current Access: read-only
NOTIFICATION-TYPE    

userLimitExceeded 1.3.6.1.4.1.4331.2.103
The concurrent number of authenticated users on\ a single node system has \ reached the maximum of the license capacity limit \ taking into account grace count for authorized users. \ This capacity is the currentlyLoggedIn on the single node systems.
Status: current Access: read-only
NOTIFICATION-TYPE