ArrayManager-MIB

File: ArrayManager-MIB.mib (283130 bytes)

Imported modules

RFC-1212 RFC-1215 RFC1155-SMI
RFC1213-MIB

Imported symbols

OBJECT-TYPE TRAP-TYPE enterprises
DisplayString

Defined Types

ProviderEntry  
SEQUENCE    
  providerNumber INTEGER
  providerName DisplayString
  providerStatus INTEGER
  providerVersion DisplayString

ControllerEntry  
SEQUENCE    
  controllerNumber INTEGER
  controllerName DisplayString
  controllerVendor DisplayString
  controllerType INTEGER
  controllerState INTEGER
  controllerSeverity INTEGER
  controllerRebuildRateInPercent INTEGER
  controllerFWVersion DisplayString
  controllerCacheSizeInMB INTEGER
  controllerCacheSizeInBytes INTEGER
  controllerPhysicalDeviceCount INTEGER
  controllerLogicalDeviceCount INTEGER
  controllerPartnerStatus DisplayString
  controllerHostPortCount INTEGER
  controllerMemorySizeInMB INTEGER
  controllerMemorySizeInBytes INTEGER
  controllerDriveChannelCount INTEGER
  controllerFaultTolerant INTEGER
  controllerC0Port0WWN DisplayString
  controllerC0Port0Name DisplayString
  controllerC0Port0ID INTEGER
  controllerC0Target INTEGER
  controllerC0Channel INTEGER
  controllerC0OSController DisplayString
  controllerC0BatteryState INTEGER
  controllerC1Port0WWN DisplayString
  controllerC1Port0Name DisplayString
  controllerC1Port0ID INTEGER
  controllerC1Target INTEGER
  controllerC1Channel INTEGER
  controllerC1OSController INTEGER
  controllerC1BatteryState INTEGER
  controllerNodeWWN DisplayString
  controllerC0Port1WWN DisplayString
  controllerC1Port1WWN DisplayString
  controllerBatteryChargeCount INTEGER

ChannelEntry  
SEQUENCE    
  channelNumber INTEGER
  channelName DisplayString
  channelState INTEGER
  channelSeverity INTEGER
  channelTermination INTEGER
  channelSCSIID INTEGER

EnclosureEntry  
SEQUENCE    
  enclosureNumber INTEGER
  enclosureName DisplayString
  enclosureVendor DisplayString
  enclosureState INTEGER
  enclosureSeverity INTEGER
  enclosureID INTEGER
  enclosureProcessorVersion DisplayString
  enclosureServiceTag DisplayString
  enclosureAssetTag DisplayString
  enclosureAssetName DisplayString
  enclosureSplitBusPartNumber DisplayString
  enclosureProductID DisplayString
  enclosureKernelVersion DisplayString
  enclosureESM1PartNumber DisplayString
  enclosureESM2PartNumber DisplayString
  enclosureType INTEGER
  enclosureProcessor2Version DisplayString
  enclosureConfig INTEGER
  enclosureChannelNumber INTEGER
  enclosureAlarm INTEGER
  enclosureBackplanePartNumber DisplayString
  enclosureSCSIID INTEGER

ArrayDiskEntry  
SEQUENCE    
  arrayDiskNumber INTEGER
  arrayDiskName DisplayString
  arrayDiskVendor DisplayString
  arrayDiskState INTEGER
  arrayDiskSeverity INTEGER
  arrayDiskProductID DisplayString
  arrayDiskSerialNo DisplayString
  arrayDiskRevision DisplayString
  arrayDiskEnclosureID DisplayString
  arrayDiskChannel INTEGER
  arrayDiskLengthInMB INTEGER
  arrayDiskLengthInBytes INTEGER
  arrayDiskLargestContiguousFreeSpaceInMB INTEGER
  arrayDiskLargestContiguousFreeSpaceInBytes INTEGER
  arrayDiskTargetID INTEGER
  arrayDiskLunID INTEGER
  arrayDiskUsedSpaceInMB INTEGER
  arrayDiskUsedSpaceInBytes INTEGER
  arrayDiskFreeSpaceInMB INTEGER
  arrayDiskFreeSpaceInBytes INTEGER
  arrayDiskBusType INTEGER
  arrayDiskSpareState INTEGER

ArrayDiskEnclosureConnectionEntry  
SEQUENCE    
  arrayDiskEnclosureConnectionNumber INTEGER
  arrayDiskEnclosureConnectionArrayDiskName DisplayString
  arrayDiskEnclosureConnectionArrayDiskNumber INTEGER
  arrayDiskEnclosureConnectionEnclosureName DisplayString
  arrayDiskEnclosureConnectionEnclosureNumber INTEGER
  arrayDiskEnclosureConnectionControllerName DisplayString
  arrayDiskEnclosureConnectionControllerNumber INTEGER

ArrayDiskChannelConnectionEntry  
SEQUENCE    
  arrayDiskChannelConnectionNumber INTEGER
  arrayDiskChannelConnectionArrayDiskName DisplayString
  arrayDiskChannelConnectionArrayDiskNumber INTEGER
  arrayDiskChannelConnectionChannelName DisplayString
  arrayDiskChannelConnectionChannelNumber INTEGER
  arrayDiskChannelConnectionControllerName DisplayString
  arrayDiskChannelConnectionControllerNumber INTEGER

FanEntry  
SEQUENCE    
  fanNumber INTEGER
  fanName DisplayString
  fanVendor DisplayString
  fanState INTEGER
  fanSeverity INTEGER
  fanProbeUnit DisplayString
  fanProbeMinWarning DisplayString
  fanProbeMinCritical DisplayString
  fanProbeMaxWarning DisplayString
  fanProbeMaxCritical DisplayString
  fanProbeCurrValue DisplayString
  fan1PartNumber DisplayString
  fan2PartNumber DisplayString

FanConnectionEntry  
SEQUENCE    
  fanConnectionNumber INTEGER
  fanConnectionFanName DisplayString
  fanConnectionFanNumber INTEGER
  fanConnectionEnclosureName DisplayString
  fanConnectionEnclosureNumber INTEGER

PowersupplyEntry  
SEQUENCE    
  powersupplyNumber INTEGER
  powersupplyName DisplayString
  powersupplyVendor DisplayString
  powersupplyState INTEGER
  powersupplySeverity INTEGER
  powersupply1PartNumber DisplayString
  powersupply2PartNumber DisplayString

PowersupplyConnectionEntry  
SEQUENCE    
  powersupplyConnectionNumber INTEGER
  powersupplyConnectionPowersupplyName DisplayString
  powersupplyConnectionPowersupplyNumber INTEGER
  powersupplyConnectionEnclosureName DisplayString
  powersupplyConnectionEnclosureNumber INTEGER

TemperatureEntry  
SEQUENCE    
  temperatureNumber INTEGER
  temperatureName DisplayString
  temperatureVendor DisplayString
  temperatureState INTEGER
  temperatureSeverity INTEGER
  temperatureProbeUnit DisplayString
  temperatureProbeMinWarning INTEGER
  temperatureProbeMinCritical INTEGER
  temperatureProbeMaxWarning INTEGER
  temperatureProbeMaxCritical INTEGER
  temperatureProbeCurValue INTEGER

TemperatureConnectionEntry  
SEQUENCE    
  temperatureConnectionNumber INTEGER
  temperatureConnectionTemperatureName DisplayString
  temperatureConnectionTemperatureNumber INTEGER
  temperatureConnectionEnclosureName DisplayString
  temperatureConnectionEnclosureNumber INTEGER

EnclosureManagementModuleEntry  
SEQUENCE    
  enclosureManagementModuleNumber INTEGER
  enclosureManagementModuleName DisplayString
  enclosureManagementModuleVendor DisplayString
  enclosureManagementModuleState INTEGER
  enclosureManagementModuleSeverity INTEGER
  enclosureManagementModulePartNumber DisplayString
  enclosureManagementModuleType INTEGER
  enclosureManagementModuleFWVersion DisplayString
  enclosureManagementModuleMaxSpeed DisplayString

EnclosureManagementModuleConnectionEntry  
SEQUENCE    
  enclosureManagementModuleConnectionNumber INTEGER
  enclosureManagementModuleConnectionEMMName DisplayString
  enclosureManagementModuleConnectionEMMNumber INTEGER
  enclosureManagementModuleConnectionEnclosureName DisplayString
  enclosureManagementModuleConnectionEnclosureNumber INTEGER

VirtualDiskEntry  
SEQUENCE    
  virtualDiskNumber INTEGER
  virtualDiskName DisplayString
  virtualDiskDeviceName DisplayString
  virtualDiskState INTEGER
  virtualDiskSeverity INTEGER
  virtualDiskLengthInMB INTEGER
  virtualDiskLengthInBytes INTEGER
  virtualDiskFreeSpaceInMB INTEGER
  virtualDiskFreeSpaceInBytes INTEGER
  virtualDiskWritePolicy INTEGER
  virtualDiskReadPolicy INTEGER
  virtualDiskCachePolicy INTEGER
  virtualDiskLayout INTEGER
  virtualDiskCurStripeSizeInMB INTEGER
  virtualDiskCurStripeSizeInBytes INTEGER
  virtualDiskChannel INTEGER
  virtualDiskTargetID INTEGER
  virtualDiskLunID INTEGER

DiskEntry  
SEQUENCE    
  diskNumber INTEGER
  diskName DisplayString
  diskVirtualDiskDeviceName DisplayString
  diskState INTEGER
  diskSeverity INTEGER
  diskLdmDeviceType INTEGER
  diskDgName DisplayString
  diskLengthInMB INTEGER
  diskLengthInBytes INTEGER
  diskFreeSpaceInMB INTEGER
  diskFreeSpaceInBytes INTEGER
  diskAdapter DisplayString
  diskPort INTEGER
  diskTargetID INTEGER
  diskLunID INTEGER
  diskVendor DisplayString

ArrayDiskLogicalConnectionEntry  
SEQUENCE    
  arrayDiskLogicalConnectionNumber INTEGER
  arrayDiskLogicalConnectionArrayDiskName DisplayString
  arrayDiskLogicalConnectionArrayDiskNumber INTEGER
  arrayDiskLogicalConnectionVirtualDiskName DisplayString
  arrayDiskLogicalConnectionVirtualDiskNumber INTEGER
  arrayDiskLogicalConnectionDiskName DisplayString
  arrayDiskLogicalConnectionDiskNumber INTEGER

SubDiskEntry  
SEQUENCE    
  subDiskNumber INTEGER
  subDiskName DisplayString
  subDiskState INTEGER
  subDiskSeverity INTEGER
  subDiskLengthInMB INTEGER
  subDiskLengthInBytes INTEGER

PartitionEntry  
SEQUENCE    
  partitionNumber INTEGER
  partitionName DisplayString
  partitionState INTEGER
  partitionSeverity INTEGER
  partitionLengthInMB INTEGER
  partitionLengthInBytes INTEGER
  partitionLdmVolumeType INTEGER

ExtendedPartitionEntry  
SEQUENCE    
  extendedPartitionNumber INTEGER
  extendedPartitionName DisplayString
  extendedPartitionState INTEGER
  extendedPartitionSeverity INTEGER

VolumeEntry  
SEQUENCE    
  volumeNumber INTEGER
  volumeDriveLetter DisplayString
  volumeState INTEGER
  volumeSeverity INTEGER
  volumeLdmVolumeType INTEGER
  volumeLabel DisplayString
  volumeFSType DisplayString
  volumeLengthInMB INTEGER
  volumeLengthInBytes INTEGER
  volumeFreeSpaceInMB INTEGER
  volumeFreeSpaceInBytes INTEGER

PlexEntry  
SEQUENCE    
  plexNumber INTEGER
  plexName DisplayString
  plexStripeWidthInMB INTEGER
  plexStripeWidthInBytes INTEGER
  plexColumns INTEGER
  plexLayout INTEGER

BasicDiskExtendedConnectionEntry  
SEQUENCE    
  basicDiskExtendedConnectionNumber INTEGER
  basicDiskExtendedConnectionArrayDiskName DisplayString
  basicDiskExtendedConnectionArrayDiskNumber INTEGER
  basicDiskExtendedConnectionVirtualDiskName DisplayString
  basicDiskExtendedConnectionVirtualDiskNumber INTEGER
  basicDiskExtendedConnectionDiskName DisplayString
  basicDiskExtendedConnectionDiskNumber INTEGER
  basicDiskExtendedConnectionExtendedPartitionName DisplayString
  basicDiskExtendedConnectionExtendedPartitionNumber INTEGER
  basicDiskExtendedConnectionPartitionName DisplayString
  basicDiskExtendedConnectionPartitionNumber INTEGER
  basicDiskExtendedConnectionVolumeDriveLetter DisplayString
  basicDiskExtendedConnectionVolumeNumber INTEGER

BasicDiskNonExtendedConnectionEntry  
SEQUENCE    
  basicDiskNonExtendedConnectionNumber INTEGER
  basicDiskNonExtendedConnectionArrayDiskName DisplayString
  basicDiskNonExtendedConnectionArrayDiskNumber INTEGER
  basicDiskNonExtendedConnectionVirtualDiskName DisplayString
  basicDiskNonExtendedConnectionVirtualDiskNumber INTEGER
  basicDiskNonExtendedConnectionDiskName DisplayString
  basicDiskNonExtendedConnectionDiskNumber INTEGER
  basicDiskNonExtendedConnectionPartitionName DisplayString
  basicDiskNonExtendedConnectionPartitionNumber INTEGER
  basicDiskNonExtendedConnectionVolumeDriveLetter DisplayString
  basicDiskNonExtendedConnectionVolumeNumber INTEGER

DynamicDiskConnectionEntry  
SEQUENCE    
  dynamicDiskConnectionNumber INTEGER
  dynamicDiskConnectionArrayDiskName DisplayString
  dynamicDiskConnectionArrayDiskNumber INTEGER
  dynamicDiskConnectionVirtualDiskName DisplayString
  dynamicDiskConnectionVirtualDiskNumber INTEGER
  dynamicDiskConnectionDiskName DisplayString
  dynamicDiskConnectionDiskNumber INTEGER
  dynamicDiskConnectionSubDiskName DisplayString
  dynamicDiskConnectionSubDiskNumber INTEGER
  dynamicDiskConnectionPlexName DisplayString
  dynamicDiskConnectionPlexNumber INTEGER
  dynamicDiskConnectionVolumeDriveLetter DisplayString
  dynamicDiskConnectionVolumeNumber INTEGER

Defined Values

dell 1.3.6.1.4.1.674
OBJECT IDENTIFIER    

storage 1.3.6.1.4.1.674.10893
OBJECT IDENTIFIER    

software 1.3.6.1.4.1.674.10893.1
OBJECT IDENTIFIER    

arrayManager 1.3.6.1.4.1.674.10893.1.1
OBJECT IDENTIFIER    

arrayMgrSoftwareVersion 1.3.6.1.4.1.674.10893.1.1.1
Version information for the Dell OpenManage Array Manager software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

arrayMgrGlobalStatus 1.3.6.1.4.1.674.10893.1.1.2
Global health information for the subsystem managed by the Dell Array Manager software. This global status is customized for HP OpenView. Other applications should refer to the agentSystemGlobalStatus entry in the globalData object group. Possible values: 1: Critical 2: Warning 3: Normal 4: Unknown
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER critical(1), warning(2), normal(3), unknown(4)  

arrayMgrSoftwareManufacturer 1.3.6.1.4.1.674.10893.1.1.3
Manufacturer information for the Dell Array Manager software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

arrayMgrSoftwareProduct 1.3.6.1.4.1.674.10893.1.1.4
Product information for the Dell Array Manager software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..64)  

arrayMgrSoftwareDescription 1.3.6.1.4.1.674.10893.1.1.5
Product Description for the Dell Array Manager software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..128)  

arrayMgrInfo 1.3.6.1.4.1.674.10893.1.1.100
OBJECT IDENTIFIER    

arrayMgrDisplayName 1.3.6.1.4.1.674.10893.1.1.100.1
Name of this agent for display purposes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayMgrDescription 1.3.6.1.4.1.674.10893.1.1.100.2
A short description of this agent such as .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayMgrAgentVendor 1.3.6.1.4.1.674.10893.1.1.100.3
The name of the agent software manufacturer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayMgrAgentVersion 1.3.6.1.4.1.674.10893.1.1.100.4
Version information for the Dell OpenManage Array Manager software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

globalData 1.3.6.1.4.1.674.10893.1.1.110
OBJECT IDENTIFIER    

agentSystemGlobalStatus 1.3.6.1.4.1.674.10893.1.1.110.1
Global health information for the subsystem managed by the Dell Array Manager software. This global status should be used by applications other than HP OpenView. HP OpenView should refer to the arrayMgrGlobalStatus in the root level object group. This is a rollup for the entire agent including any monitored devices. The status is intended to give initiative to a snmp monitor to get further data when this status is abnormal. Possible values: 1: Normal 2: Warning 3: Non-critical Error 4: Failure 5: Unknown
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), warning(2), nonCriticalError(3), failure(4), unknown(5)  

agentLastGlobalStatus 1.3.6.1.4.1.674.10893.1.1.110.2
The the previous global status of the system managed by the Dell Array Manager software. Possible values: 1: Normal 2: Warning 3: Non-critical Error 4: Failure 5: Unknown
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), warning(2), nonCriticalError(3), failure(4), unknown(5)  

agentTimeStamp 1.3.6.1.4.1.674.10893.1.1.110.3
The last time that the agent values have been updated. Universal time in sec since UTC 1/1/70.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

agentGetTimeout 1.3.6.1.4.1.674.10893.1.1.110.4
Suggested timeout value in milliseconds for how long the SNMP getter should wait while attempting to poll the SNMP agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10000  

agentModifiers 1.3.6.1.4.1.674.10893.1.1.110.5
Agent functional modifiers, when set the modifier is active. Bit definitions: Bit 3: agent in debug mode. All other bits are product specific
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10000  

agentRefreshRate 1.3.6.1.4.1.674.10893.1.1.110.6
Rate in seconds at which the agent cached data is being updated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10000  

agentHostname 1.3.6.1.4.1.674.10893.1.1.110.7
The fully qualified network hostname of the host where the agent is running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

agentIPAddress 1.3.6.1.4.1.674.10893.1.1.110.8
The IP Address of the host where the agent is running and at which the SNMP agent can be contacted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

agentSoftwareStatus 1.3.6.1.4.1.674.10893.1.1.110.9
Status of the Array Manager Database service software. 1: Database Up - Communication with the database is possible for SNMP queries. 2: Database Down - Communication with the database is not possible for SNMP queries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER databaseUp(1), databaseDown(2)  

agentAmSnmpVersion 1.3.6.1.4.1.674.10893.1.1.110.10
Version of the Array Manager SNMP extension agent for Windows, SNMP provider for Netware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

agentAmMibVersion 1.3.6.1.4.1.674.10893.1.1.110.11
Version of the Array Manager MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

providerData 1.3.6.1.4.1.674.10893.1.1.120
OBJECT IDENTIFIER    

providerTable 1.3.6.1.4.1.674.10893.1.1.120.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ProviderEntry

providerEntry 1.3.6.1.4.1.674.10893.1.1.120.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ProviderEntry  

providerNumber 1.3.6.1.4.1.674.10893.1.1.120.1.1.1
Instance number of this provider entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

providerName 1.3.6.1.4.1.674.10893.1.1.120.1.1.2
The name of the module that supports either a family of devices or a set of functions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

providerStatus 1.3.6.1.4.1.674.10893.1.1.120.1.1.3
The status of this provider. 1: Loaded 2: Failed 3: Unknown
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), failed(2), unknown(3)  

providerVersion 1.3.6.1.4.1.674.10893.1.1.120.1.1.4
This version and build number of the provider module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

physicalDevices 1.3.6.1.4.1.674.10893.1.1.130
OBJECT IDENTIFIER    

controllerTable 1.3.6.1.4.1.674.10893.1.1.130.1
A table of managed RAID controllers. The number of entries is related to number of RAID controllers discovered in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ControllerEntry

controllerEntry 1.3.6.1.4.1.674.10893.1.1.130.1.1
An entry in the table of RAID controllers. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ControllerEntry  

controllerNumber 1.3.6.1.4.1.674.10893.1.1.130.1.1.1
Instance number of this controller entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

controllerName 1.3.6.1.4.1.674.10893.1.1.130.1.1.2
The name of the contoller in this subsystem as represented in Array Manager. Includes the controller type and instance. For example: Perc3/QC 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerVendor 1.3.6.1.4.1.674.10893.1.1.130.1.1.3
The controller's (re)seller's name. For Dell controllers this will = Dell.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerType 1.3.6.1.4.1.674.10893.1.1.130.1.1.4
The type of this controller: 1: SCSI 2: PV660F 3: PV662F 4: IDE (Integrated/Intelligent Drive Electronics)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER scsi(1), pv660F(2), pv662F(3), ide(4)  

controllerState 1.3.6.1.4.1.674.10893.1.1.130.1.1.5
The status of this controller's subsystem (which includes any devices connected to it.) Possible states: 0: Unknown 1: Ready 2: Failed 3: Online 4: Offline 6: Degraded
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), offline(4), degraded(6)  

controllerSeverity 1.3.6.1.4.1.674.10893.1.1.130.1.1.6
Seriousness of the controller state. Possible values: 0: OK 1: Warning 2: Error 3: Failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

controllerRebuildRateInPercent 1.3.6.1.4.1.674.10893.1.1.130.1.1.7
The percent of the compute cycles dedicated to rebuilding failed array disks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

controllerFWVersion 1.3.6.1.4.1.674.10893.1.1.130.1.1.8
The controller's current firmware version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerCacheSizeInMB 1.3.6.1.4.1.674.10893.1.1.130.1.1.9
The controller's current amount of cache memory in megabytes. If this size is 0, it is less than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerCacheSizeInBytes 1.3.6.1.4.1.674.10893.1.1.130.1.1.10
The controller's current amount of cache memory that is less than a megabyte. This combined with the controllerCacheSizeInMB will be the total amount of memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerPhysicalDeviceCount 1.3.6.1.4.1.674.10893.1.1.130.1.1.11
Number of physical devices on the controller channel including both disks and the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerLogicalDeviceCount 1.3.6.1.4.1.674.10893.1.1.130.1.1.12
Number of virtual disks on the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerPartnerStatus 1.3.6.1.4.1.674.10893.1.1.130.1.1.13
Indicates availability of the redundant controller in a redundant configuration. Booting: Controller is powering up. OK: Controller is in fully redundant status. Inserted: Controller is there, but not acting as a partner. Kill Partner Command Received: Failed: UnknownStatus: SCSI Comm Failure:
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerHostPortCount 1.3.6.1.4.1.674.10893.1.1.130.1.1.14
The number of host ports on this controller. Host Port: An active fibre port connected to an arbitrated loop. The port may be opened by an initiator on the loop and process i/o requests.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerMemorySizeInMB 1.3.6.1.4.1.674.10893.1.1.130.1.1.15
Size of memory in megabytes on the controller. If this size is 0, it is less than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerMemorySizeInBytes 1.3.6.1.4.1.674.10893.1.1.130.1.1.16
Size of memory on the controller that is less than a megabyte. This combined with the controllerMemorySizeInMB will be the total size of the memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerDriveChannelCount 1.3.6.1.4.1.674.10893.1.1.130.1.1.17
The number of redundant drive channels for the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

controllerFaultTolerant 1.3.6.1.4.1.674.10893.1.1.130.1.1.18
Indicates whether the controller is enabled to be fault tolerant. 0: no 1: yes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1)  

controllerC0Port0WWN 1.3.6.1.4.1.674.10893.1.1.130.1.1.19
World Wide name for the first port on controller 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerC0Port0Name 1.3.6.1.4.1.674.10893.1.1.130.1.1.20
The unique value/name assigned to the controller's first active port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerC0Port0ID 1.3.6.1.4.1.674.10893.1.1.130.1.1.21
The controller's preferred host port/loopid as specified by controller option 'hard loop id' for its first port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerC0Target 1.3.6.1.4.1.674.10893.1.1.130.1.1.22
The controller in slot 0 (it should always be the master controller.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerC0Channel 1.3.6.1.4.1.674.10893.1.1.130.1.1.23
Channel number of the controller's first port. Channel: A path for the transfer of data and controller information between the host or the physical disk drives and the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerC0OSController 1.3.6.1.4.1.674.10893.1.1.130.1.1.24
Manufacturer's identification of controller on first port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerC0BatteryState 1.3.6.1.4.1.674.10893.1.1.130.1.1.25
Current state of battery on the controller's first port. Possible values: 0: Unknown 1: OK (present and operational) 2: Failed (cannot hold charge or cannot be recharged) 7: Reconditioning (PV660 Only) 9: High 10: Low 12: Charging 21: Missing (Adaptec Only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), failed(2), reconditioning(7), high(9), low(10), charging(12), missing(21)  

controllerC1Port0WWN 1.3.6.1.4.1.674.10893.1.1.130.1.1.26
World Wide name for the first port on controller 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerC1Port0Name 1.3.6.1.4.1.674.10893.1.1.130.1.1.27
The unique value/name assigned to the controller's second active port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerC1Port0ID 1.3.6.1.4.1.674.10893.1.1.130.1.1.28
The controller's preferred host port/loopid as specified by controller option 'hard loop id' for its second port. (Value of 255 = C1 controller not there)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerC1Target 1.3.6.1.4.1.674.10893.1.1.130.1.1.29
The controller in slot 1. (Value of 255 = controller not there)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerC1Channel 1.3.6.1.4.1.674.10893.1.1.130.1.1.30
Channel number of the controller's second port. Channel: A path for the transfer of data and controller information between the host or the physical disk drives and the controller. (Value of 255 = controller not there)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerC1OSController 1.3.6.1.4.1.674.10893.1.1.130.1.1.31
Manufacturer's identification of controller on second port. (Value of 255 = controller not there)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

controllerC1BatteryState 1.3.6.1.4.1.674.10893.1.1.130.1.1.32
Current state of battery on the controller's second port. Possible values: 0: Unknown 1: OK (present and operational) 2: Failed (cannot hold charge or cannot be recharged) 7: Reconditioning (PV660 Only) 9: High 10: Low 12: Charging 21: Missing (Adaptec Only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ok(1), failed(2), reconditioning(7), high(9), low(10), charging(12), missing(21)  

controllerNodeWWN 1.3.6.1.4.1.674.10893.1.1.130.1.1.33
Used as the node name for the storage subsystem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerC0Port1WWN 1.3.6.1.4.1.674.10893.1.1.130.1.1.34
World Wide name for the second port on controller 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerC1Port1WWN 1.3.6.1.4.1.674.10893.1.1.130.1.1.35
World Wide name for the second port on controller 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

controllerBatteryChargeCount 1.3.6.1.4.1.674.10893.1.1.130.1.1.36
The number of charges that have been applied to the battery on this controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

channelTable 1.3.6.1.4.1.674.10893.1.1.130.2
A table of controller channels. The number of entries is related to number of channels supported in a RAID controllers. Perc2 RAID controller supports a max of 4 channels per controller. The maximum number of entries is implementation dependent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ChannelEntry

channelEntry 1.3.6.1.4.1.674.10893.1.1.130.2.1
An entry in the channel table. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ChannelEntry  

channelNumber 1.3.6.1.4.1.674.10893.1.1.130.2.1.1
Instance number of this channel entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

channelName 1.3.6.1.4.1.674.10893.1.1.130.2.1.2
The name of the channel as represented in Array Manager. The name will include the word channel and the instance. For example: Channel 1
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

channelState 1.3.6.1.4.1.674.10893.1.1.130.2.1.3
The current state of this channel. Possible states: 0: Unknown 1: Ready - The I/O has resumed. 2: Failed 3: Online 4: Offline - The I/O has paused. 6: Degraded
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), offline(4), degraded(6)  

channelSeverity 1.3.6.1.4.1.674.10893.1.1.130.2.1.4
Seriousness of the channel state. Possible values: 0: OK 1: Warning 2: Error 3: Failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

channelTermination 1.3.6.1.4.1.674.10893.1.1.130.2.1.5
The type of SCSI termination on this channel. Termination is required for proper operation of this channel. 1: Wide Termination (16 bit) 2: Narrow Termination (8 bit) 3: Not Terminated
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER wide(1), narrow(2), notTerminated(3)  

channelSCSIID 1.3.6.1.4.1.674.10893.1.1.130.2.1.6
The SCSI ID of the controller to which the channel belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

enclosureTable 1.3.6.1.4.1.674.10893.1.1.130.3
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnclosureEntry

enclosureEntry 1.3.6.1.4.1.674.10893.1.1.130.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  EnclosureEntry  

enclosureNumber 1.3.6.1.4.1.674.10893.1.1.130.3.1.1
Instance number of the enclosure entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

enclosureName 1.3.6.1.4.1.674.10893.1.1.130.3.1.2
The enclosure's name as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureVendor 1.3.6.1.4.1.674.10893.1.1.130.3.1.3
The enclosure's (re)seller's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureState 1.3.6.1.4.1.674.10893.1.1.130.3.1.4
The state of the controller. Possible states: 0 : Unknown 1 : Ready 2 : Failed 3 : Online 4 : Offline 6 : Degraded 55: Communication Lost
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), offline(4), degraded(6), commLost(55)  

enclosureSeverity 1.3.6.1.4.1.674.10893.1.1.130.3.1.5
Seriousness of the enclosure state. Possible values: 0: OK 1: Warning 2: Error 3: Failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER warining(1), error(2), failure(3)  

enclosureID 1.3.6.1.4.1.674.10893.1.1.130.3.1.6
For fibre channel - The number of the enclosure in the subsystem. For SCSI - The SCSI address of the processor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

enclosureProcessorVersion 1.3.6.1.4.1.674.10893.1.1.130.3.1.7
Firmware version of the enclosure's processor. For Fibre Channel only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureServiceTag 1.3.6.1.4.1.674.10893.1.1.130.3.1.8
Enclosure identification used when consulting customer support.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureAssetTag 1.3.6.1.4.1.674.10893.1.1.130.3.1.9
Customer definable asset tag for the enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureAssetName 1.3.6.1.4.1.674.10893.1.1.130.3.1.10
Customer definable asset name of the enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureSplitBusPartNumber 1.3.6.1.4.1.674.10893.1.1.130.3.1.11
The enclosure's split bus part number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureProductID 1.3.6.1.4.1.674.10893.1.1.130.3.1.12
The enclosure's product identification. This also corresponds to the enclosure type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureKernelVersion 1.3.6.1.4.1.674.10893.1.1.130.3.1.13
The version of the enclosure's kernel (Dell PV200S, PV201S, PV210S, and PV211S only.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureESM1PartNumber 1.3.6.1.4.1.674.10893.1.1.130.3.1.14
This entry is obsolete.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureESM2PartNumber 1.3.6.1.4.1.674.10893.1.1.130.3.1.15
This entry is obsolete.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureType 1.3.6.1.4.1.674.10893.1.1.130.3.1.16
The type of this enclosure. Possible values: 1: Internal 2: Dell PV200S (PV201S) 3: Dell PV210S (PV211S) 4: Dell PV220S (PV221S) 5: Dell PV660F 6: Dell PV224F 7: Dell PV660F / PV224F
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(1), dELLPV200SPV201S(2), dELLPV210SPV211S(3), dELLPV220SPV221S(4), dELLPV660F(5), dELLPV224F(6), dELLPV660F224F(7)  

enclosureProcessor2Version 1.3.6.1.4.1.674.10893.1.1.130.3.1.17
This entry is obsolete.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureConfig 1.3.6.1.4.1.674.10893.1.1.130.3.1.18
The current configuration of the enclosure's backplane. Possible values: 1: Joined 2: Split Bus 3: Clustered
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER joined(1), splitBus(2), clustered(3)  

enclosureChannelNumber 1.3.6.1.4.1.674.10893.1.1.130.3.1.19
The channel number, or bus, to which the enclosure is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

enclosureAlarm 1.3.6.1.4.1.674.10893.1.1.130.3.1.20
The current status of the enclosure's alarm (PV220S, and PV221S only.) Possible values: 1: Off 2: On
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

enclosureBackplanePartNumber 1.3.6.1.4.1.674.10893.1.1.130.3.1.21
The part number of the enclosure's backplane.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureSCSIID 1.3.6.1.4.1.674.10893.1.1.130.3.1.22
The SCSI ID of the controller to which this enclosure is attached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskTable 1.3.6.1.4.1.674.10893.1.1.130.4
A table of managed Array Disks. The number of entries is related to number of Array Disks discovered in the system. The maximum number of entries is implementation dependent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArrayDiskEntry

arrayDiskEntry 1.3.6.1.4.1.674.10893.1.1.130.4.1
An entry in the Array Disk table . A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArrayDiskEntry  

arrayDiskNumber 1.3.6.1.4.1.674.10893.1.1.130.4.1.1
Instance number of this array disk entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000000000  

arrayDiskName 1.3.6.1.4.1.674.10893.1.1.130.4.1.2
The name of the array disk as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskVendor 1.3.6.1.4.1.674.10893.1.1.130.4.1.3
The array disk's (re)seller's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskState 1.3.6.1.4.1.674.10893.1.1.130.4.1.4
The current state of the array disk. Possible states: 0: Unknown 1: Ready - Available for use, but no RAID configuration has been assigned. 2: Failed - Not operational. 3: Online - Operational. RAID configuration has been assigned. 4: Offline - The drive is not available to the RAID controller. 6: Degraded - Refers to a fault-tolerant array/virtual disk that has a failed disk. 7: Recovering - Refers to state of recovering from bad blocks on disks. 11: Removed - Indicates that array disk has been removed. 15: Resynching - Indicates one of the following types of disk operations: Transform Type, Reconfiguration, and Check Consistency. 24: Rebuild 25: No Media - CD-ROM or removable disk has no media. 26: Formatting - In the process of formatting. 28: Diagnostics - Diagnostics are running. 35: Initializing: Applies only to virtual disks on PERC, PERC 2/SC, and PERC 2/DC controllers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), offline(4), degraded(6), recovering(7), removed(11), resynching(15), rebuild(24), noMedia(25), formatting(26), diagnostics(28), initializing(35)  

arrayDiskSeverity 1.3.6.1.4.1.674.10893.1.1.130.4.1.5
Severity of the array disk state. Possible values: 0: OK 1: Warning 2: Error 3: Failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

arrayDiskProductID 1.3.6.1.4.1.674.10893.1.1.130.4.1.6
The model number of the array disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskSerialNo 1.3.6.1.4.1.674.10893.1.1.130.4.1.7
The array disk's unique identification number from the manufacturer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskRevision 1.3.6.1.4.1.674.10893.1.1.130.4.1.8
The firmware version of the array disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskEnclosureID 1.3.6.1.4.1.674.10893.1.1.130.4.1.9
The SCSI ID of the enclosure processor to which this array disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskChannel 1.3.6.1.4.1.674.10893.1.1.130.4.1.10
The bus to which this array disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskLengthInMB 1.3.6.1.4.1.674.10893.1.1.130.4.1.11
The size in megabytes of the array disk. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskLengthInBytes 1.3.6.1.4.1.674.10893.1.1.130.4.1.12
The size of the array disk in bytes that is less than a megabyte. This size plus the arrayDiskLengthInMB is the total size of the array disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskLargestContiguousFreeSpaceInMB 1.3.6.1.4.1.674.10893.1.1.130.4.1.13
The size in megabytes of the largest contiguous free space on the array disk. If this size is 0, it is less than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskLargestContiguousFreeSpaceInBytes 1.3.6.1.4.1.674.10893.1.1.130.4.1.14
The size of the largest contiguouis free space on this array disk in bytes that is less than a megabyte. This size plus the arrayDiskLargestContiguousFreeSpaceInMB is the total size of the largest contiguous free space on the array disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskTargetID 1.3.6.1.4.1.674.10893.1.1.130.4.1.15
The SCSI target ID which this array disk is assigned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

arrayDiskLunID 1.3.6.1.4.1.674.10893.1.1.130.4.1.16
The array disk's logical unit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskUsedSpaceInMB 1.3.6.1.4.1.674.10893.1.1.130.4.1.17
The amount in megabytes of the used space on the array disk. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskUsedSpaceInBytes 1.3.6.1.4.1.674.10893.1.1.130.4.1.18
The size in bytes of the used space on the array disk that is smaller than a megabyte. This size plus the arrayDiskUsedSpaceInMB is the total amount of used space on the array disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskFreeSpaceInMB 1.3.6.1.4.1.674.10893.1.1.130.4.1.19
The amount in megabytes of the free space on the array disk. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskFreeSpaceInBytes 1.3.6.1.4.1.674.10893.1.1.130.4.1.20
The size in bytes of the free space on the array disk that is smaller than a megabyte. This size plus the arrayDiskFreeSpaceInMB is the total amount of free space on the array disk.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

arrayDiskBusType 1.3.6.1.4.1.674.10893.1.1.130.4.1.21
The bus type of the array disk. Possible values: 1: SCSI 2: IDE 3: Fibre Channel 4: SSA 6: USB
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER scsi(1), ide(2), fibre(3), ssa(4), usb(6)  

arrayDiskSpareState 1.3.6.1.4.1.674.10893.1.1.130.4.1.22
The status of the array disk as a spare. Possible states: 1: disk is a member of a virtual disk 2: disk is a member of a disk group 3: disk is a global hot spare 4: disk is a dedicated hot spare
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER memberVD(1), memberDG(2), globalHotSpare(3), dedicatedHotSpare(4)  

arrayDiskEnclosureConnectionTable 1.3.6.1.4.1.674.10893.1.1.130.5
A table of the connections between array disks, their enclosure, and their associated controller. For each object in the table, its object number corresponds to an instance number in the appropriate MIB table for that object where all of the object properties can be found.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArrayDiskEnclosureConnectionEntry

arrayDiskEnclosureConnectionEntry 1.3.6.1.4.1.674.10893.1.1.130.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArrayDiskEnclosureConnectionEntry  

arrayDiskEnclosureConnectionNumber 1.3.6.1.4.1.674.10893.1.1.130.5.1.1
Instance number of this array disk connection entry. This table shows the array disk to SCSI or Fibre Channel enclosure relationship.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000000000  

arrayDiskEnclosureConnectionArrayDiskName 1.3.6.1.4.1.674.10893.1.1.130.5.1.2
The name of the array disk in this connection as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskEnclosureConnectionArrayDiskNumber 1.3.6.1.4.1.674.10893.1.1.130.5.1.3
The instance number of the array disk in the arrayDiskTable in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskEnclosureConnectionEnclosureName 1.3.6.1.4.1.674.10893.1.1.130.5.1.4
The name of the enclosure as represented in Array Manager to which this array disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskEnclosureConnectionEnclosureNumber 1.3.6.1.4.1.674.10893.1.1.130.5.1.5
The instance number in the enclosureTable of the enclosure to which this array disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskEnclosureConnectionControllerName 1.3.6.1.4.1.674.10893.1.1.130.5.1.6
The name of the controller as represented in Array Manager to which this array disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskEnclosureConnectionControllerNumber 1.3.6.1.4.1.674.10893.1.1.130.5.1.7
The instance number in the controllerTable of the controller to which this array disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskChannelConnectionTable 1.3.6.1.4.1.674.10893.1.1.130.6
A table of the connections between array disks, their channel, and their associated controller. For each object in the table, its object number corresponds to an instance number in the appropriate MIB table for that object where all of the object properties can be found.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArrayDiskChannelConnectionEntry

arrayDiskChannelConnectionEntry 1.3.6.1.4.1.674.10893.1.1.130.6.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArrayDiskChannelConnectionEntry  

arrayDiskChannelConnectionNumber 1.3.6.1.4.1.674.10893.1.1.130.6.1.1
Instance number of this array disk connection entry. This table shows the array disk to SCSI channel relationship. There is no enclosure service processor associated with these array disks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000000000  

arrayDiskChannelConnectionArrayDiskName 1.3.6.1.4.1.674.10893.1.1.130.6.1.2
The name of the array disk in this connection as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskChannelConnectionArrayDiskNumber 1.3.6.1.4.1.674.10893.1.1.130.6.1.3
The instance number of the array disk in the arrayDiskTable in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskChannelConnectionChannelName 1.3.6.1.4.1.674.10893.1.1.130.6.1.4
The name of the channel as represented in Array Manager to which is array disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskChannelConnectionChannelNumber 1.3.6.1.4.1.674.10893.1.1.130.6.1.5
The instance number of the channel in the channelTable to which this array disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskChannelConnectionControllerName 1.3.6.1.4.1.674.10893.1.1.130.6.1.6
The name of the controller as represented in Array Manager to which this array disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskChannelConnectionControllerNumber 1.3.6.1.4.1.674.10893.1.1.130.6.1.7
The instance number in the controllerTable of the controller to which this array disk is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fanTable 1.3.6.1.4.1.674.10893.1.1.130.7
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FanEntry

fanEntry 1.3.6.1.4.1.674.10893.1.1.130.7.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FanEntry  

fanNumber 1.3.6.1.4.1.674.10893.1.1.130.7.1.1
Instance number of this fan entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000000000  

fanName 1.3.6.1.4.1.674.10893.1.1.130.7.1.2
The fan's name as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanVendor 1.3.6.1.4.1.674.10893.1.1.130.7.1.3
The fan's (re)seller's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanState 1.3.6.1.4.1.674.10893.1.1.130.7.1.4
Current state of the fan. Possible states: 0 : Unknown 1 : Ready 2 : Failed 3 : Online 4 : Offline 6 : Degraded 55: Communication Lost
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), degraded(6), removed(11), commLost(55)  

fanSeverity 1.3.6.1.4.1.674.10893.1.1.130.7.1.5
Seiousness of the fan state. Possible values: 0: OK 1: Warning 2: Error 3: Failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

fanProbeUnit 1.3.6.1.4.1.674.10893.1.1.130.7.1.6
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanProbeMinWarning 1.3.6.1.4.1.674.10893.1.1.130.7.1.7
The minimum value that will force the fan into a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanProbeMinCritical 1.3.6.1.4.1.674.10893.1.1.130.7.1.8
The minimum value that will force the fan into an error state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanProbeMaxWarning 1.3.6.1.4.1.674.10893.1.1.130.7.1.9
The maximum value that will force the fan into a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanProbeMaxCritical 1.3.6.1.4.1.674.10893.1.1.130.7.1.10
The maximum value that will force the fan into an error state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanProbeCurrValue 1.3.6.1.4.1.674.10893.1.1.130.7.1.11
The current speed of the fan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fan1PartNumber 1.3.6.1.4.1.674.10893.1.1.130.7.1.12
The part number of the fan in the enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fan2PartNumber 1.3.6.1.4.1.674.10893.1.1.130.7.1.13
This entry is obsolete.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanConnectionTable 1.3.6.1.4.1.674.10893.1.1.130.8
A table of the connections between each fan on the managed node and its enclosure. Each enclosure number in the table corresponds to that enclosure instance in the Enclosure Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FanConnectionEntry

fanConnectionEntry 1.3.6.1.4.1.674.10893.1.1.130.8.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FanConnectionEntry  

fanConnectionNumber 1.3.6.1.4.1.674.10893.1.1.130.8.1.1
Instance number of this fan connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

fanConnectionFanName 1.3.6.1.4.1.674.10893.1.1.130.8.1.2
The name of the fan in this connection as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanConnectionFanNumber 1.3.6.1.4.1.674.10893.1.1.130.8.1.3
The instance number of the fan in the fanTable in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

fanConnectionEnclosureName 1.3.6.1.4.1.674.10893.1.1.130.8.1.4
The name of the enclosure as represented in Array Manager to which this fan belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

fanConnectionEnclosureNumber 1.3.6.1.4.1.674.10893.1.1.130.8.1.5
The instance number of the enclosure in the enclosureTable to which this fan belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

powersupplyTable 1.3.6.1.4.1.674.10893.1.1.130.9
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PowersupplyEntry

powersupplyEntry 1.3.6.1.4.1.674.10893.1.1.130.9.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PowersupplyEntry  

powersupplyNumber 1.3.6.1.4.1.674.10893.1.1.130.9.1.1
Instance number of this powersupply entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

powersupplyName 1.3.6.1.4.1.674.10893.1.1.130.9.1.2
The power supply's name as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

powersupplyVendor 1.3.6.1.4.1.674.10893.1.1.130.9.1.3
The power supply's (re)seller's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

powersupplyState 1.3.6.1.4.1.674.10893.1.1.130.9.1.4
Current state of the power supply. Possible states: 0 : Unknown 1 : Ready 2 : Failed 55: Communication Lost
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), commLost(55)  

powersupplySeverity 1.3.6.1.4.1.674.10893.1.1.130.9.1.5
Seriousness of the power supply state. Possible values: 0: OK 1: Warning 2: Error 3: Failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

powersupply1PartNumber 1.3.6.1.4.1.674.10893.1.1.130.9.1.6
The part number of the power supply of the enclosure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

powersupply2PartNumber 1.3.6.1.4.1.674.10893.1.1.130.9.1.7
This entry is obsolete.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

powersupplyConnectionTable 1.3.6.1.4.1.674.10893.1.1.130.10
A table of the connections between each power supply on the managed node and its enclosure. Each enclosure number in the table corresponds to that enclosure instance in the Enclosure Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PowersupplyConnectionEntry

powersupplyConnectionEntry 1.3.6.1.4.1.674.10893.1.1.130.10.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PowersupplyConnectionEntry  

powersupplyConnectionNumber 1.3.6.1.4.1.674.10893.1.1.130.10.1.1
Instance number of this powersupply connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

powersupplyConnectionPowersupplyName 1.3.6.1.4.1.674.10893.1.1.130.10.1.2
The name of the power supply in this connection as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

powersupplyConnectionPowersupplyNumber 1.3.6.1.4.1.674.10893.1.1.130.10.1.3
This instance number in the powersupplyTable of the power supply in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

powersupplyConnectionEnclosureName 1.3.6.1.4.1.674.10893.1.1.130.10.1.4
The name of the enclosure to which this power supply is connected as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

powersupplyConnectionEnclosureNumber 1.3.6.1.4.1.674.10893.1.1.130.10.1.5
The instance number of the enclosure in the enclosureTable to which this power supply is connected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

temperatureTable 1.3.6.1.4.1.674.10893.1.1.130.11
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TemperatureEntry

temperatureEntry 1.3.6.1.4.1.674.10893.1.1.130.11.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TemperatureEntry  

temperatureNumber 1.3.6.1.4.1.674.10893.1.1.130.11.1.1
Instance number of this temperature probe entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

temperatureName 1.3.6.1.4.1.674.10893.1.1.130.11.1.2
Name of this temperature probe as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

temperatureVendor 1.3.6.1.4.1.674.10893.1.1.130.11.1.3
Temperature probe's (re)seller's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

temperatureState 1.3.6.1.4.1.674.10893.1.1.130.11.1.4
Current state of this temperature probe. Possible states: 0 : Unknown 1 : Ready 2 : Failed 4 : Offline 6 : Degraded 55: Communication Lost
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), offline(4), degraded(6), commLost(55)  

temperatureSeverity 1.3.6.1.4.1.674.10893.1.1.130.11.1.5
Seriousness of the temperature probe state. Possible values: 0: OK 1: Warning 2: Error 3: Failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

temperatureProbeUnit 1.3.6.1.4.1.674.10893.1.1.130.11.1.6
The units that will be used to display temperatures for this temperature probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

temperatureProbeMinWarning 1.3.6.1.4.1.674.10893.1.1.130.11.1.7
The minimum temperature that will force the probe into a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

temperatureProbeMinCritical 1.3.6.1.4.1.674.10893.1.1.130.11.1.8
The minimum temperature that will force the probe into an error state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

temperatureProbeMaxWarning 1.3.6.1.4.1.674.10893.1.1.130.11.1.9
The maximum temperature that will force the probe into a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

temperatureProbeMaxCritical 1.3.6.1.4.1.674.10893.1.1.130.11.1.10
The maximum temperature that will force the probe into an error state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

temperatureProbeCurValue 1.3.6.1.4.1.674.10893.1.1.130.11.1.11
The current temperature of this probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

temperatureConnectionTable 1.3.6.1.4.1.674.10893.1.1.130.12
A table of the connections between each temperature probe on the managed node and its enclosure. Each enclosure number in the table corresponds to that enclosure instance in the Enclosure Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TemperatureConnectionEntry

temperatureConnectionEntry 1.3.6.1.4.1.674.10893.1.1.130.12.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TemperatureConnectionEntry  

temperatureConnectionNumber 1.3.6.1.4.1.674.10893.1.1.130.12.1.1
Instance number of this temperature probe connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

temperatureConnectionTemperatureName 1.3.6.1.4.1.674.10893.1.1.130.12.1.2
The name of the temperature probe in this connection as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

temperatureConnectionTemperatureNumber 1.3.6.1.4.1.674.10893.1.1.130.12.1.3
The instance number in the temperatureTable of the temperature probe in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

temperatureConnectionEnclosureName 1.3.6.1.4.1.674.10893.1.1.130.12.1.4
The name of the enclosure as represented in Array Manager to which this temperature probe belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

temperatureConnectionEnclosureNumber 1.3.6.1.4.1.674.10893.1.1.130.12.1.5
The instance number of the enclosure in the enclosureTable to which this temperature probe belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

enclosureManagementModuleTable 1.3.6.1.4.1.674.10893.1.1.130.13
A table of managed Enclosure Memory Modules. The number of entries is related to number of Enclosure Memory Modules discovered in the system. The maximum number of entries is implementation dependent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnclosureManagementModuleEntry

enclosureManagementModuleEntry 1.3.6.1.4.1.674.10893.1.1.130.13.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  EnclosureManagementModuleEntry  

enclosureManagementModuleNumber 1.3.6.1.4.1.674.10893.1.1.130.13.1.1
Instance number of this enclosure memory module entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

enclosureManagementModuleName 1.3.6.1.4.1.674.10893.1.1.130.13.1.2
Name of this enclosure memory module as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleVendor 1.3.6.1.4.1.674.10893.1.1.130.13.1.3
The management module's (re)seller's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleState 1.3.6.1.4.1.674.10893.1.1.130.13.1.4
The state of the enclosure management module. Possible states: 0 : Unknown 1 : Ready 2 : Failed 3 : Online 4 : Offline 6 : Degraded 55: Communication Lost
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), offline(4), degraded(6), commLost(55)  

enclosureManagementModuleSeverity 1.3.6.1.4.1.674.10893.1.1.130.13.1.5
Seriousness of the enclosure management module state. Possible values: 0: OK 1: Warning 2: Error 3: Failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

enclosureManagementModulePartNumber 1.3.6.1.4.1.674.10893.1.1.130.13.1.6
The part number of the enclosure memory module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleType 1.3.6.1.4.1.674.10893.1.1.130.13.1.7
The type of the enclosure management module. Possible values: 0: Unknown 1: EMM 2: Termination Card
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER eMM(1), terminationCard(2)  

enclosureManagementModuleFWVersion 1.3.6.1.4.1.674.10893.1.1.130.13.1.8
Firmware version of the enclosure memory module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleMaxSpeed 1.3.6.1.4.1.674.10893.1.1.130.13.1.9
The maximum bus speed of the enclosure management module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleConnectionTable 1.3.6.1.4.1.674.10893.1.1.130.14
A table of the connections between each enclosure management module on the managed node and its enclosure. Each enclosure number in the table corresponds to that enclosure instance in the Enclosure Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EnclosureManagementModuleConnectionEntry

enclosureManagementModuleConnectionEntry 1.3.6.1.4.1.674.10893.1.1.130.14.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  EnclosureManagementModuleConnectionEntry  

enclosureManagementModuleConnectionNumber 1.3.6.1.4.1.674.10893.1.1.130.14.1.1
Instance number of this enclosure management module connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

enclosureManagementModuleConnectionEMMName 1.3.6.1.4.1.674.10893.1.1.130.14.1.2
The name of the enclosure management module in this connection as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleConnectionEMMNumber 1.3.6.1.4.1.674.10893.1.1.130.14.1.3
The instance number of the enclosure management module in the enclosureManagementModuleTable in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

enclosureManagementModuleConnectionEnclosureName 1.3.6.1.4.1.674.10893.1.1.130.14.1.4
The name of the enclosure as represented in Array Manager to which this enclosure management module belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureManagementModuleConnectionEnclosureNumber 1.3.6.1.4.1.674.10893.1.1.130.14.1.5
The instance number of the enclosure in the enclosureTable to which this enclosure management module belongs
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

logicalDevices 1.3.6.1.4.1.674.10893.1.1.140
OBJECT IDENTIFIER    

virtualDiskTable 1.3.6.1.4.1.674.10893.1.1.140.1
A table of managed Virtual Disks. The number of entries is related to number of Virtual Disks discovered in the system. The maximum number of entries is implementation dependent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VirtualDiskEntry

virtualDiskEntry 1.3.6.1.4.1.674.10893.1.1.140.1.1
An entry in the Virtual Disk table. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VirtualDiskEntry  

virtualDiskNumber 1.3.6.1.4.1.674.10893.1.1.140.1.1.1
Instance number of this virtual disk entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..100000000  

virtualDiskName 1.3.6.1.4.1.674.10893.1.1.140.1.1.2
The virtual disk's label generated by the provider or entered by the user.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

virtualDiskDeviceName 1.3.6.1.4.1.674.10893.1.1.140.1.1.3
Device name used by this virtual disk's member disks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

virtualDiskState 1.3.6.1.4.1.674.10893.1.1.140.1.1.4
The current state of this virtual disk. Possible states: 0: Unknown 1: Ready - The disk is accessible and has no known problems. 2: Failed - Access has been lost to the data or is about to be lost. 3: Online 4: Offline - The disk is not accessible. The disk may be corrupted or intermittently unavailable. 6: Degraded - The data on the virtual disk is no longer fault tolerant because one of the underlying disks is not online. 15: Resynching 24: Rebuilding 26: Formatting 35: Initializing
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), offline(4), degraded(6), verifying(7), resynching(15), failedRedundancy(18), rebuilding(24), formatting(26), initializing(35)  

virtualDiskSeverity 1.3.6.1.4.1.674.10893.1.1.140.1.1.5
Seriousness of the virtual disk state. Possible values: 0: OK 1: Warning 2: Error 3: Failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

virtualDiskLengthInMB 1.3.6.1.4.1.674.10893.1.1.140.1.1.6
The size of this virtual disk in megabytes. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskLengthInBytes 1.3.6.1.4.1.674.10893.1.1.140.1.1.7
The portion of the virtual disk in bytes that is smaller than a megabyte. This size plus the virtualDiskLengthInMB is the total size of the virtual disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskFreeSpaceInMB 1.3.6.1.4.1.674.10893.1.1.140.1.1.8
Amount of free space in megabytes on virtual disk. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskFreeSpaceInBytes 1.3.6.1.4.1.674.10893.1.1.140.1.1.9
The portion of the free space on the virtual disk in bytes that is smaller than a megabyte. This size plus the virtualDiskFreeSpaceInMB is the total free space on the virtual disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskWritePolicy 1.3.6.1.4.1.674.10893.1.1.140.1.1.10
Indicates whether the controller's write cache will be used when writing to a virtual disk. Possible values: 1: Enabled - Write Back 2: Disabled - Write Through
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

virtualDiskReadPolicy 1.3.6.1.4.1.674.10893.1.1.140.1.1.11
Indicates whether the controller's read cache will be used when reading from a virtual disk. Note: Virtual Disks on a PV660F do not have a read cache policy. Possible values: 1: Enabled - Read Ahead 2: Disabled - No Read Ahead 3: Adaptive Read Ahead
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), adaptiveReadAhead(3)  

virtualDiskCachePolicy 1.3.6.1.4.1.674.10893.1.1.140.1.1.12
Indicates whether the controller's cache is used when reading from or writing to a virtual disk. Possible values: 1: Direct I/O 2: Cached I/O
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER directIO(1), cachedIO(2)  

virtualDiskLayout 1.3.6.1.4.1.674.10893.1.1.140.1.1.13
The virtual disk's RAID type. Possible values: 1: Concatenated 2: Raid-0 3: Raid-1 4: Raid-2 5: Raid-3 6: Raid-4 7: Raid-5 8: Raid-6 9: Raid-7 10: Raid-10 11: Raid-30 12: Raid-50 13: Add Spares 14: Delete Logical 15: Transform Logical 18: Raid-0-plus-1 (0+1)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER concatenated(1), raid-0(2), raid-1(3), raid-2(4), raid-3(5), raid-4(6), raid-5(7), raid-6(8), raid-7(9), raid-10(10), raid-30(11), raid-50(12), addSpares(13), deleteLogical(14), transformLogical(15), raid-0-plus-1(18)  

virtualDiskCurStripeSizeInMB 1.3.6.1.4.1.674.10893.1.1.140.1.1.14
The stripe size of this virtual disk in megabytes. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskCurStripeSizeInBytes 1.3.6.1.4.1.674.10893.1.1.140.1.1.15
The portion of the stripe size in bytes that is smaller than a megabyte. This size plus the virtualDiskCurStripeSizeInMB is the total stripe size on the virtual disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskChannel 1.3.6.1.4.1.674.10893.1.1.140.1.1.16
The virtual disk's channel number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskTargetID 1.3.6.1.4.1.674.10893.1.1.140.1.1.17
The virtual disk's target ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

virtualDiskLunID 1.3.6.1.4.1.674.10893.1.1.140.1.1.18
The virtual disk's LUN ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskTable 1.3.6.1.4.1.674.10893.1.1.140.2
A table of managed disks that are a member of a Virtual Disk. The number of entries is related to the number of online array disks discovered in the system. The maximum number of entries is implementation dependent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DiskEntry

diskEntry 1.3.6.1.4.1.674.10893.1.1.140.2.1
An entry in the Member Disk table. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DiskEntry  

diskNumber 1.3.6.1.4.1.674.10893.1.1.140.2.1.1
Instance number of the disk entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000000000  

diskName 1.3.6.1.4.1.674.10893.1.1.140.2.1.2
The disk's name as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

diskVirtualDiskDeviceName 1.3.6.1.4.1.674.10893.1.1.140.2.1.3
Device name of the virtual disk that includes this disk. This is used to link the Disk to its virtual disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

diskState 1.3.6.1.4.1.674.10893.1.1.140.2.1.4
The current state of the Disk. Possible states: 0: Unknown 1: Ready 2: Failed 3: Online - The disk is accessible and has no known problems. 4: Offline 6: Degraded 24: Rebuild 25: No Media 40: Not Ready
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), offline(4), degraded(6), rebuild(24), noMedia(25), notReady(40)  

diskSeverity 1.3.6.1.4.1.674.10893.1.1.140.2.1.5
Seriousness of the disk state. Possible values: 0: OK 1: Warning 2: Error 3: Failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

diskLdmDeviceType 1.3.6.1.4.1.674.10893.1.1.140.2.1.6
The disk's LDM device type. Possible values: 1: Dynamic 2: Removable 3: CD-ROM 4: Basic 5: Basic with no signature 6: OEM 7: DVD
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(1), removable(2), cd-rom(3), basic(4), basicNoSignature(5), oem(6), dvd(7)  

diskDgName 1.3.6.1.4.1.674.10893.1.1.140.2.1.7
The name identifying the disk type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

diskLengthInMB 1.3.6.1.4.1.674.10893.1.1.140.2.1.8
Length of the disk in megabytes. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskLengthInBytes 1.3.6.1.4.1.674.10893.1.1.140.2.1.9
The portion in bytes of the disk length that is less than a megabyte. This size plus the diskLengthInMB is the total length of the disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskFreeSpaceInMB 1.3.6.1.4.1.674.10893.1.1.140.2.1.10
The amount of free space on this disk in megabytes. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskFreeSpaceInBytes 1.3.6.1.4.1.674.10893.1.1.140.2.1.11
The portion in bytes of the disk free space that is less than a megabyte. This size plus the diskFreeSpaceInMB is the total free space on the disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskAdapter 1.3.6.1.4.1.674.10893.1.1.140.2.1.12
The name of the controller to which the device(s) represented by this disk object are connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

diskPort 1.3.6.1.4.1.674.10893.1.1.140.2.1.13
The disk's port number as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskTargetID 1.3.6.1.4.1.674.10893.1.1.140.2.1.14
The disk's target ID as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskLunID 1.3.6.1.4.1.674.10893.1.1.140.2.1.15
The disk's LUN ID as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diskVendor 1.3.6.1.4.1.674.10893.1.1.140.2.1.16
The disk's (re)seller's name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskLogicalConnectionTable 1.3.6.1.4.1.674.10893.1.1.140.3
A table of the connections between array disks, the virtual disk to which they belong, and their associated logical disk. For each object in the table, its object number corresponds to an instance number in the appropriate MIB table for that object where all of the object properties can be found.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArrayDiskLogicalConnectionEntry

arrayDiskLogicalConnectionEntry 1.3.6.1.4.1.674.10893.1.1.140.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArrayDiskLogicalConnectionEntry  

arrayDiskLogicalConnectionNumber 1.3.6.1.4.1.674.10893.1.1.140.3.1.1
Instance number of this array disk logical connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000000000  

arrayDiskLogicalConnectionArrayDiskName 1.3.6.1.4.1.674.10893.1.1.140.3.1.2
The name of the array disk in this logical connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskLogicalConnectionArrayDiskNumber 1.3.6.1.4.1.674.10893.1.1.140.3.1.3
The instance number of the array disk in this logical connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskLogicalConnectionVirtualDiskName 1.3.6.1.4.1.674.10893.1.1.140.3.1.4
The name of the virtual disk to which this array disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskLogicalConnectionVirtualDiskNumber 1.3.6.1.4.1.674.10893.1.1.140.3.1.5
The instance number of the virtual disk to which this array disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arrayDiskLogicalConnectionDiskName 1.3.6.1.4.1.674.10893.1.1.140.3.1.6
The name of the disk group to with this array disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskLogicalConnectionDiskNumber 1.3.6.1.4.1.674.10893.1.1.140.3.1.7
This instance number of the disk group to with this array disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

subDiskTable 1.3.6.1.4.1.674.10893.1.1.140.4
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SubDiskEntry

subDiskEntry 1.3.6.1.4.1.674.10893.1.1.140.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SubDiskEntry  

subDiskNumber 1.3.6.1.4.1.674.10893.1.1.140.4.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000000  

subDiskName 1.3.6.1.4.1.674.10893.1.1.140.4.1.2
The name identifying this sub-disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

subDiskState 1.3.6.1.4.1.674.10893.1.1.140.4.1.3
The current state of the sub-disk. Possible states: 0: Unknown 1: Ready 2: Failed 3: Online - The disk is accessible and has no known problems. 4: Offline 6: Degraded
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), offline(4), degraded(6)  

subDiskSeverity 1.3.6.1.4.1.674.10893.1.1.140.4.1.4
Severity of the sub-disk state. Possible values: 0: OK 1: Warning 2: Error 3: Failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

subDiskLengthInMB 1.3.6.1.4.1.674.10893.1.1.140.4.1.5
Length of the sub-disk in megabytes. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

subDiskLengthInBytes 1.3.6.1.4.1.674.10893.1.1.140.4.1.6
The portion in bytes of the sub-disk length that is less than a megabyte. This size plus the subDiskLengthInMB is the total length of the sub-disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

partitionTable 1.3.6.1.4.1.674.10893.1.1.140.5
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PartitionEntry

partitionEntry 1.3.6.1.4.1.674.10893.1.1.140.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PartitionEntry  

partitionNumber 1.3.6.1.4.1.674.10893.1.1.140.5.1.1
Instance number of the partition entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

partitionName 1.3.6.1.4.1.674.10893.1.1.140.5.1.2
The partition's name as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

partitionState 1.3.6.1.4.1.674.10893.1.1.140.5.1.3
The state of the partition. Possible states: 0: Unknown 1: Ready 2: Failed 3: Online 6: Degraded
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), degraded(6)  

partitionSeverity 1.3.6.1.4.1.674.10893.1.1.140.5.1.4
Severity of the partition state. Possible values: 0: OK 1: Warning 2: Error 3: Failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

partitionLengthInMB 1.3.6.1.4.1.674.10893.1.1.140.5.1.5
The length of the partition in megabytes. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

partitionLengthInBytes 1.3.6.1.4.1.674.10893.1.1.140.5.1.6
The portion of the partition length that is less than a megabyte. This size plus the partitionLengthInMB is the total length of the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

partitionLdmVolumeType 1.3.6.1.4.1.674.10893.1.1.140.5.1.7
The partition's LDM volume type. Possible values: 1: Basic - standard DOS/Windows disk signature 2: Extended 3: Logical 4: CD ROM 5: Simple 6: Stripe 7: Mirror 8: Raid5 9: Span 10: Dynamic - upgraded disk
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER basic(1), extended(2), logical(3), cdrom(4), simple(5), stripe(6), mirror(7), raid5(8), span(9), dynamic(10)  

extendedPartitionTable 1.3.6.1.4.1.674.10893.1.1.140.6
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ExtendedPartitionEntry

extendedPartitionEntry 1.3.6.1.4.1.674.10893.1.1.140.6.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ExtendedPartitionEntry  

extendedPartitionNumber 1.3.6.1.4.1.674.10893.1.1.140.6.1.1
The instance number of this extended partition entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000000  

extendedPartitionName 1.3.6.1.4.1.674.10893.1.1.140.6.1.2
The name of this extended partition as represented in Array Manager
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

extendedPartitionState 1.3.6.1.4.1.674.10893.1.1.140.6.1.3
The current state of the extended partition. Possible states: 0: Unknown 1: Ready 2: Failed 3: Online 6: Degraded
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), degraded(6)  

extendedPartitionSeverity 1.3.6.1.4.1.674.10893.1.1.140.6.1.4
Seriousness of the extended partition state. Possible values: 0: OK 1: Warning 2: Error 3: Failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failure(3)  

volumeTable 1.3.6.1.4.1.674.10893.1.1.140.7
A table of volumes that are recognized by the operating system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VolumeEntry

volumeEntry 1.3.6.1.4.1.674.10893.1.1.140.7.1
An entry in the volume table. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VolumeEntry  

volumeNumber 1.3.6.1.4.1.674.10893.1.1.140.7.1.1
Instance number of the volume entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

volumeDriveLetter 1.3.6.1.4.1.674.10893.1.1.140.7.1.2
The volume's path (or drive letter) according to the operating system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..255)  

volumeState 1.3.6.1.4.1.674.10893.1.1.140.7.1.3
The volume's current state. Possible states: 0: Unknown 1: Ready - The volume is accessible and has no known problems. 2: Failed - The volume cannot be started automatically. 3: Online 4: Offline 6: Degraded 18: Failed Redundancy - The data on the volume is no longer fault tolerant because one of the underlying disks is not online. 25: No Media 26: Formatting - The volume is being formatted using the specifications you chose for formatting. ?: Initializing - The volume is being initialized. ?: Resynching - The volume's mirrors are being resynchronized so that both mirrors contain identical data. ?: Regenerating - Data and parity are being regenerated for the RAID-5 volume. ?: Failed Redundancy (At Risk) - The data on the volume is no longer fault tolerant, and I/O errors have been detected on the underlying disk ?: No Media - No media has been inserted into the CD-ROM or removable drive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), failed(2), online(3), offline(4), degraded(6), failedRedundancy(18), noMedia(25), formatting(26)  

volumeSeverity 1.3.6.1.4.1.674.10893.1.1.140.7.1.4
The severity of the volume. Possible values: 0: OK 1: Warining 2: Error 3: Failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER warning(1), error(2), failrue(3)  

volumeLdmVolumeType 1.3.6.1.4.1.674.10893.1.1.140.7.1.5
The volume's LMD volume type. Possible values: 1: Basic - standard DOS/Windows disk signature 2: Extended 3: Logical 4: CD ROM 5: Simple 6: Stripe 7: Mirror 8: Raid5 9: Span 10: Dynamic
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER basic(1), extended(2), logical(3), cd-rom(4), simple(5), stripe(6), mirrror(7), raid5(8), span(9), dynamic(10)  

volumeLabel 1.3.6.1.4.1.674.10893.1.1.140.7.1.6
The user definable label for this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

volumeFSType 1.3.6.1.4.1.674.10893.1.1.140.7.1.7
The volume's operating system file system type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

volumeLengthInMB 1.3.6.1.4.1.674.10893.1.1.140.7.1.8
The size of the volume in megabytes. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeLengthInBytes 1.3.6.1.4.1.674.10893.1.1.140.7.1.9
The portion in bytes of the volume that is smaller than a megabyte. This size plus the volumeLengthInMB is the total length of the volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeFreeSpaceInMB 1.3.6.1.4.1.674.10893.1.1.140.7.1.10
The amount of free space on the volume in megabytes. If this size if 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeFreeSpaceInBytes 1.3.6.1.4.1.674.10893.1.1.140.7.1.11
The portion in bytes of the free space on the volume that is smaller than a megabyte. This size plus the volumeFreeSpaceInMB is the total length of the volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

plexTable 1.3.6.1.4.1.674.10893.1.1.140.8
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PlexEntry

plexEntry 1.3.6.1.4.1.674.10893.1.1.140.8.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PlexEntry  

plexNumber 1.3.6.1.4.1.674.10893.1.1.140.8.1.1
Instance number of the plex entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

plexName 1.3.6.1.4.1.674.10893.1.1.140.8.1.2
The name identifying this plex as represented in Array Manager.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

plexStripeWidthInMB 1.3.6.1.4.1.674.10893.1.1.140.8.1.3
The width of the plex stripe in megabytes. If this size is 0, it is smaller than a megabyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

plexStripeWidthInBytes 1.3.6.1.4.1.674.10893.1.1.140.8.1.4
The portion in bytes of the plex stripe that is smaller than a megabyte. This size plus the plexStripeWidthInMB is the total size of the stripe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

plexColumns 1.3.6.1.4.1.674.10893.1.1.140.8.1.5
The number of columns in one plex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

plexLayout 1.3.6.1.4.1.674.10893.1.1.140.8.1.6
The type of RAID of this plex. Possible values: 1: Striped Subdisks 2: Concatenated Subdisks 3: RAID layout
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER stripedSubdisks(1), concatenatedSubdisks(2), raidLayout(3)  

basicDiskExtendedConnectionTable 1.3.6.1.4.1.674.10893.1.1.140.9
A table of the connections between array disks, the virtual disk to which they belong, their associated logical basic disk, extended partition, partition and volume. For each object in the table, its object number corresponds to an instance number in the appropriate MIB table for that object where all of the object properties can be found.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasicDiskExtendedConnectionEntry

basicDiskExtendedConnectionEntry 1.3.6.1.4.1.674.10893.1.1.140.9.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BasicDiskExtendedConnectionEntry  

basicDiskExtendedConnectionNumber 1.3.6.1.4.1.674.10893.1.1.140.9.1.1
Instance number of this basic disk connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000000  

basicDiskExtendedConnectionArrayDiskName 1.3.6.1.4.1.674.10893.1.1.140.9.1.2
The name of an array disk that is part of the basic disk in this connection table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

basicDiskExtendedConnectionArrayDiskNumber 1.3.6.1.4.1.674.10893.1.1.140.9.1.3
The instance number in the arrayDiskTable of the array disk in this basic disk connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

basicDiskExtendedConnectionVirtualDiskName 1.3.6.1.4.1.674.10893.1.1.140.9.1.4
The name of the virtual disk that is part of the basic disk in this connection table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

basicDiskExtendedConnectionVirtualDiskNumber 1.3.6.1.4.1.674.10893.1.1.140.9.1.5
The instance number in the virtualDiskTable of this virtual disk that is part of the basic disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

basicDiskExtendedConnectionDiskName 1.3.6.1.4.1.674.10893.1.1.140.9.1.6
The name of the basic disk in this connection table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

basicDiskExtendedConnectionDiskNumber 1.3.6.1.4.1.674.10893.1.1.140.9.1.7
The instance number in the diskTable of the disk in this conneciton table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

basicDiskExtendedConnectionExtendedPartitionName 1.3.6.1.4.1.674.10893.1.1.140.9.1.8
The name of the extended partition that is part of the basic disk in this connection table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

basicDiskExtendedConnectionExtendedPartitionNumber 1.3.6.1.4.1.674.10893.1.1.140.9.1.9
The instance number in the extendedPartitionTable of this extended partition that is part of the basic disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

basicDiskExtendedConnectionPartitionName 1.3.6.1.4.1.674.10893.1.1.140.9.1.10
The name of the partition that is part of the basic disk in this connection table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

basicDiskExtendedConnectionPartitionNumber 1.3.6.1.4.1.674.10893.1.1.140.9.1.11
The instance number in the partitionTable of this partition that is part of the basic disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

basicDiskExtendedConnectionVolumeDriveLetter 1.3.6.1.4.1.674.10893.1.1.140.9.1.12
The path (or drive letter) of the volume to which this basic disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

basicDiskExtendedConnectionVolumeNumber 1.3.6.1.4.1.674.10893.1.1.140.9.1.13
The instance number in the volumeTable of the volume to which this basic disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

basicDiskNonExtendedConnectionTable 1.3.6.1.4.1.674.10893.1.1.140.10
A table of the connections between array disks, the virtual disk to which they belong, their associated logical basic disk, partition and volume. For each object in the table, its object number corresponds to an instance number in the appropriate MIB table for that object where all of the object properties can be found.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasicDiskNonExtendedConnectionEntry

basicDiskNonExtendedConnectionEntry 1.3.6.1.4.1.674.10893.1.1.140.10.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BasicDiskNonExtendedConnectionEntry  

basicDiskNonExtendedConnectionNumber 1.3.6.1.4.1.674.10893.1.1.140.10.1.1
Instance number of this basic disk connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1000000  

basicDiskNonExtendedConnectionArrayDiskName 1.3.6.1.4.1.674.10893.1.1.140.10.1.2
The name of an array disk that is part of the basic disk in this connection table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

basicDiskNonExtendedConnectionArrayDiskNumber 1.3.6.1.4.1.674.10893.1.1.140.10.1.3
The instance number in the arrayDiskTable of the array disk in this basic disk connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

basicDiskNonExtendedConnectionVirtualDiskName 1.3.6.1.4.1.674.10893.1.1.140.10.1.4
The name of the virtual disk that is part of the basic disk in this connection table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

basicDiskNonExtendedConnectionVirtualDiskNumber 1.3.6.1.4.1.674.10893.1.1.140.10.1.5
The instance number in the virtualDiskTable of this virtual disk that is part of the basic disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

basicDiskNonExtendedConnectionDiskName 1.3.6.1.4.1.674.10893.1.1.140.10.1.6
The name of the basic disk in this connection table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

basicDiskNonExtendedConnectionDiskNumber 1.3.6.1.4.1.674.10893.1.1.140.10.1.7
The instance number in the diskTable of the disk in this conneciton table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

basicDiskNonExtendedConnectionPartitionName 1.3.6.1.4.1.674.10893.1.1.140.10.1.8
The name of the partition that is part of the basic disk in this connection table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

basicDiskNonExtendedConnectionPartitionNumber 1.3.6.1.4.1.674.10893.1.1.140.10.1.9
The instance number in the partitionTable of this partition that is part of the basic disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

basicDiskNonExtendedConnectionVolumeDriveLetter 1.3.6.1.4.1.674.10893.1.1.140.10.1.10
The path (or drive letter) of the volume to which this basic disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

basicDiskNonExtendedConnectionVolumeNumber 1.3.6.1.4.1.674.10893.1.1.140.10.1.11
The instance number in the volumeTable of the volume to which this basic disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dynamicDiskConnectionTable 1.3.6.1.4.1.674.10893.1.1.140.11
A table of the connections between array disks, the virtual disk to which they belong, their associated logical dynamic disk, sub-disk, plex and volume. For each object in the table, its object number corresponds to an instance number in the appropriate MIB table for that object where all of the object properties can be found.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DynamicDiskConnectionEntry

dynamicDiskConnectionEntry 1.3.6.1.4.1.674.10893.1.1.140.11.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DynamicDiskConnectionEntry  

dynamicDiskConnectionNumber 1.3.6.1.4.1.674.10893.1.1.140.11.1.1
Instance number of this dynamic disk connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

dynamicDiskConnectionArrayDiskName 1.3.6.1.4.1.674.10893.1.1.140.11.1.2
The name of an array disk that is part of the dynamic disk in this connection table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dynamicDiskConnectionArrayDiskNumber 1.3.6.1.4.1.674.10893.1.1.140.11.1.3
The instance number in the arrayDiskTable of the array disk in this dynamic disk connection entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dynamicDiskConnectionVirtualDiskName 1.3.6.1.4.1.674.10893.1.1.140.11.1.4
The name of the virtual disk that is part of the dynamic disk in this connection table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dynamicDiskConnectionVirtualDiskNumber 1.3.6.1.4.1.674.10893.1.1.140.11.1.5
The instance number in the virtualDiskTable of this virtual disk that is part of the dynamic disk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dynamicDiskConnectionDiskName 1.3.6.1.4.1.674.10893.1.1.140.11.1.6
The name of the dynamic disk in this connection table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dynamicDiskConnectionDiskNumber 1.3.6.1.4.1.674.10893.1.1.140.11.1.7
The instance number in the diskTable of the disk in this conneciton table entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dynamicDiskConnectionSubDiskName 1.3.6.1.4.1.674.10893.1.1.140.11.1.8
The name of the dynamic sub-disk in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dynamicDiskConnectionSubDiskNumber 1.3.6.1.4.1.674.10893.1.1.140.11.1.9
The instance number in the subDiskTable of the dynamic sub-disk in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dynamicDiskConnectionPlexName 1.3.6.1.4.1.674.10893.1.1.140.11.1.10
The name of the plex to which this dynamic disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dynamicDiskConnectionPlexNumber 1.3.6.1.4.1.674.10893.1.1.140.11.1.11
The instance number in the plexTable of the plex to which this dynamic disk belongs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

dynamicDiskConnectionVolumeDriveLetter 1.3.6.1.4.1.674.10893.1.1.140.11.1.12
The path (or drive letter) of the volume to which this dynamic disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

dynamicDiskConnectionVolumeNumber 1.3.6.1.4.1.674.10893.1.1.140.11.1.13
The instance number of the volume to which this dynamic disk belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

aryMgrEvts 1.3.6.1.4.1.674.10893.1.1.200
OBJECT IDENTIFIER    

controllerNameEv 1.3.6.1.4.1.674.10893.1.1.200.201
Controller Name for which trap is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..64)  

channelNumberEv 1.3.6.1.4.1.674.10893.1.1.200.202
Channel Number for which trap is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

targetIDEv 1.3.6.1.4.1.674.10893.1.1.200.203
SCSI ID of the device for which trap is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

virtualDiskNameEv 1.3.6.1.4.1.674.10893.1.1.200.204
Virtual Disk for which trap is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..64)  

arrayDiskNameEv 1.3.6.1.4.1.674.10893.1.1.200.205
Array Disk for which trap is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..64)  

oldVDConfigEv 1.3.6.1.4.1.674.10893.1.1.200.206
Current Virtual Disk configuration for which trap is generated
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..128)  

newVDConfigEv 1.3.6.1.4.1.674.10893.1.1.200.207
New Virtual Disk configuration for which trap is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..128)  

enclosureNumberEv 1.3.6.1.4.1.674.10893.1.1.200.208
Enclosure Number for which trap is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

unitNumberEv 1.3.6.1.4.1.674.10893.1.1.200.209
Unit Number for which trap is generated. (Fan, Power Supply, Temperature Probe)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

enclosureNameEv 1.3.6.1.4.1.674.10893.1.1.200.210
Enclosure Name for which trap is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

unitNameEv 1.3.6.1.4.1.674.10893.1.1.200.211
Unit Number for which trap is generated. (Fan, Power Supply, Temperature Probe)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

timeEv 1.3.6.1.4.1.674.10893.1.1.200.212
Amount of time specified in the trap message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeNameEv 1.3.6.1.4.1.674.10893.1.1.200.213
Volume Drive Letter for which trap is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

enclosureUnitNamesEv 1.3.6.1.4.1.674.10893.1.1.200.214
Combination of the enclosure name and unit number for which trap is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

virtualDiskNameNewEv 1.3.6.1.4.1.674.10893.1.1.200.215
New name of the virtual disk for which trap is generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

device1NameEv 1.3.6.1.4.1.674.10893.1.1.200.216
Name of the device for which trap is generated. Note: The device type contained in this generic variable could change for different occurrences of a trap.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

senseKeyEv 1.3.6.1.4.1.674.10893.1.1.200.217
Sense Key data for this trap in hexidecimal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

senseCodeEv 1.3.6.1.4.1.674.10893.1.1.200.218
Sense Code data for this trap in hexidecimal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

senseQualifierEv 1.3.6.1.4.1.674.10893.1.1.200.219
Sense Qualifier data for this trap in hexidecimal.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

eMMFWVersion0Ev 1.3.6.1.4.1.674.10893.1.1.200.220
Firmware version for EMM 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

eMMFWVersion1Ev 1.3.6.1.4.1.674.10893.1.1.200.221
Firmware version for EMM 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

rebuildRateEv 1.3.6.1.4.1.674.10893.1.1.200.222
New rebuild rate for controller in this event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

arrayDiskFailed 500
%s, %s failed.
TRAP-TYPE    

arrayDiskRemoved 501
%s, %s removed.
TRAP-TYPE    

arrayDiskOffline 502
%s, %s offline.
TRAP-TYPE    

arrayDiskDegraded 503
%s, %s degraded.
TRAP-TYPE    

arrayDiskInserted 504
%s, %s inserted.
TRAP-TYPE    

virtualDiskCreated 505
%s, virtual disk (%s) created.
TRAP-TYPE    

virtualDiskDeleted 506
%s, virtual disk (%s) deleted.
TRAP-TYPE    

virtualDiskConfigChanged 507
%s, virtual disk (%s) configuration changed from %s to %s
TRAP-TYPE    

virtualDiskFailed 508
%s, virtual disk (%s) failed.
TRAP-TYPE    

virtualDiskDegraded 509
%s, virtual disk (%s) degraded.
TRAP-TYPE    

vdFailedRedundancy 510
%s, virtual disk (%s) is no longer redundant.
TRAP-TYPE    

checkConsistencyStarted 520
%s, virtual disk (%s) check consistency started.
TRAP-TYPE    

vdFormatStarted 521
%s, virtual disk (%s) format started.
TRAP-TYPE    

adFormatStarted 522
%s, %s format started.
TRAP-TYPE    

vdInitializeStarted 523
%s, virtual disk (%s) initialization started.
TRAP-TYPE    

adInitializeStarted 524
%s, %s initialize started.
TRAP-TYPE    

vdReconfigStarted 525
%s, virtual disk (%s) reconfiguration from %s stripe size to %s stripe size started.
TRAP-TYPE    

vdRebuildStarted 526
%s, virtual disk (%s) rebuild started.
TRAP-TYPE    

adRebuildStarted 527
%s, %s rebuild started.
TRAP-TYPE    

adDiagStarted 528
%s, %s diagnostics started.
TRAP-TYPE    

checkConsistencyCancelled 529
%s, virtual disk (%s) consistency check cancelled.
TRAP-TYPE    

vdFormatCancelled 530
%s, virtual disk (%s) format cancelled.
TRAP-TYPE    

adFormatCancelled 531
%s, %s format cancelled.
TRAP-TYPE    

vdInitializeCancelled 532
%s, virtual disk (%s) initialization cancelled.
TRAP-TYPE    

adInitializeCancelled 533
%s, %s initialize cancelled.
TRAP-TYPE    

vdReconfigCancelled 534
%s, virtual disk (%s) reconfiguration cancelled.
TRAP-TYPE    

vdRebuildCancelled 535
%s, virtual disk (%s) rebuild cancelled.
TRAP-TYPE    

adRebuildCancelled 536
%s, %s rebuild cancelled.
TRAP-TYPE    

adDiagCancelled 537
%s, %s diagnostics cancelled.
TRAP-TYPE    

checkConsistencyFailed 538
%s, virtual disk (%s) consistency check failed.
TRAP-TYPE    

vdFormatFailed 539
%s, virtual disk (%s) format failed.
TRAP-TYPE    

adFormatFailed 540
%s, %s format failed.
TRAP-TYPE    

vdInitializeFailed 541
%s, virtual disk (%s) initialization failed.
TRAP-TYPE    

adInitializeFailed 542
%s, %s initialize failed.
TRAP-TYPE    

vdReconfigFailed 543
%s, virtual disk (%s) reconfiguration failed.
TRAP-TYPE    

vdRebuildFailed 544
%s, virtual disk (%s) rebuild failed.
TRAP-TYPE    

adRebuildFailed 545
%s, %s rebuild failed.
TRAP-TYPE    

adDiagFailed 546
%s, %s diagnostics failed.
TRAP-TYPE    

checkConsistencyCompleted 547
%s, virtual disk (%s) consistency check completed.
TRAP-TYPE    

vdFormatCompleted 548
%s, virtual disk (%s) format completed.
TRAP-TYPE    

adFormatCompleted 549
%s, %s format completed.
TRAP-TYPE    

vdInitializeCompleted 550
%s, virtual disk (%s) initialization completed.
TRAP-TYPE    

adInitializeCompleted 551
%s, %s initialize completed.
TRAP-TYPE    

vdReconfigCompleted 552
%s, virtual disk (%s) reconfiguration completed.
TRAP-TYPE    

vdRebuildCompleted 553
%s, virtual disk (%s) rebuild completed.
TRAP-TYPE    

adRebuildCompleted 554
%s, %s rebuild completed.
TRAP-TYPE    

adDiagCompleted 555
%s, %s diagnostics completed.
TRAP-TYPE    

percPredictiveFailure 570
%s, %s reported predictive failure. If this disk is part of a redundant virtual disk, select the 'Offline' option and then replace the disk. Then configure a hot spare and it will start the rebuild automatically. If this disk is a hot spare, select the 'Prepare to Remove' option and then replace the disk. If this disk is part of a non-redundant disk, you should back-up your data immediately. If the disk fails, you will not be able to recover the data.
TRAP-TYPE    

percSCSISenseData 571
%s, %s SCSI sense failure. If this disk is part of a redundant virtual disk, select the 'Offline' option and then replace the disk. Then configure a hot spare and it will start the rebuild automatically. If this disk is a hot spare, select the 'Prepare to Remove' option and then replace the disk. If this disk is part of a non-redundant disk, you should back-up your data immediately. If the disk fails, you will not be able to recover the data.
TRAP-TYPE    

percPauseIO 572
%s, Channel %s I/O paused, I/O will automatically resume after the allotted time (%d seconds).
TRAP-TYPE    

percResumeIO 573
%s, Channel %s I/O resumed.
TRAP-TYPE    

percHotSpareAssign 574
%s, assigned %s as Hot Spare.
TRAP-TYPE    

percHotSpareUnAssign 575
%s, unassigned %s as Hot Spare.
TRAP-TYPE    

cntrlBatteryNeedsReconditioning 579
%s battery needs reconditioning.
TRAP-TYPE    

cntrlBatteryLow 580
%s battery low.
TRAP-TYPE    

cntrlBatteryRecondition 581
%s battery is reconditioning.
TRAP-TYPE    

cntrlBatteryReconComplete 582
%s battery reconditioning completed.
TRAP-TYPE    

cntrlPauseIO 583
%s I/O paused, I/O will automatically resume after the allotted time.
TRAP-TYPE    

cntrlResumeIO 584
%s I/O resumed.
TRAP-TYPE    

perc2SmartFPTExceeded 585
%s SMART:FPT_EXCEEDED on %s.
TRAP-TYPE    

perc2SmartConfigChange 586
%s SMART configuration change on %s.
TRAP-TYPE    

perc2SmartWarning 587
%s SMART warning on %s.
TRAP-TYPE    

perc2SmartWarningTemp 588
%s SMART warning temperature on %s.
TRAP-TYPE    

perc2SmartWarningDegraded 589
%s SMART warning degraded on %s.
TRAP-TYPE    

perc2SmartFPTExceededTest 590
%s, On %s the failure prediction threshold exceeded due to test-No action needed.
TRAP-TYPE    

enclosureAlertTempWarnMax 591
%s, %s has exceded the maximum warning threshold.
TRAP-TYPE    

enclosureAlertTempWarnMin 592
%s, %s has dropped below the minimum warning threshold.
TRAP-TYPE    

enclosureAlertTempErrMax 593
%s, %s has exceded the maximum error threshold.
TRAP-TYPE    

enclosureAlertTempErrMin 594
%s, %s has dropped below the minimum error threshold.
TRAP-TYPE    

enclosureGenericFailed 595
%s, %s failed.
TRAP-TYPE    

enclosureGenericOffline 596
%s, %s is offline.
TRAP-TYPE    

enclosureGenericUnknown 597
%s, %s is in an unknown state.
TRAP-TYPE    

enclosureGenericWarning 598
%s, %s is in a warning state.
TRAP-TYPE    

enclosureGenericDegraded 600
%s, %s is degraded.
TRAP-TYPE    

alertShutdownEnclosure 602
%s, %s Shutting down.
TRAP-TYPE    

alertShutdownServer 603
%s, %s Shutting down the server.
TRAP-TYPE    

alertPausedCheckConsistency 604
%s, Virtual Disk (%s) consistency check paused.
TRAP-TYPE    

alertResumedCheckConsistency 605
%s, Virtual Disk (%s) consistency check resumed.
TRAP-TYPE    

alertVirtualDiskSplitMirror 606
%s, Virtual Disk (%s) split mirror.
TRAP-TYPE    

alertVirtualDiskUnmirror 607
%s, Virtual Disk (%s) unmirrored.
TRAP-TYPE    

alertRenameVirtualDisk 608
%s, %s renamed to %s.
TRAP-TYPE    

alertGenericReady 609
%s, %s is in a ready state.
TRAP-TYPE    

alertCommTimeout 610
%s, %s SES communication timeout.
TRAP-TYPE    

alertCommFailure 611
%s, %s SES communication lost.
TRAP-TYPE    

alertCommRestored 612
%s, %s SES communication restored.
TRAP-TYPE    

genericEvent-DATABASE-UP 650
Communication with the Array Manager database is now possible.
TRAP-TYPE    

genericEvent-DATABASE-DOWN 651
Communication with the Array Manager database is NOT possible.
TRAP-TYPE    

alertMegalibTimeout 668
%s Array Manager has lost communication with this RAID controller and subsystem.
TRAP-TYPE    

alertScsiSenseFormatFail 670
%s, %s Sense Key = %s, Sense Code = %s, Sense Qualifier = %s A format unit operation was interrupted prior to completion.
TRAP-TYPE    

alertScsiSenseSectorReassign 671
%s, %s Sense Key = %s, Sense Code = %s, Sense Qualifier = %s If this disk is part of a non-redundant virtual disk, the data for this block cannot be recovered.
TRAP-TYPE    

alertEmmFwMismatch 672
%s, %s EMMfirmware mismatch (%s / %s.) This is an unsupported configuration. Please download the firmware to this enclosure again to correct this condition.
TRAP-TYPE    

alertConserveCacheModeEnable 673
%s, %s conservative cache mode enabled.
TRAP-TYPE    

alertConserveCacheModeDisable 674
%s, %s conservative cache mode disabled.
TRAP-TYPE    

alertEnclosureFwDownload 675
%s, %s firmware version %s downloaded successfully.
TRAP-TYPE    

alertEnclosureAlarmEnable 676
%s, %s alarm enabled.
TRAP-TYPE    

alertEnclosureAlarmDisable 677
%s, %s alarm disabled.
TRAP-TYPE    

alertControllerAlarmEnable 678
%s, %s alarm enabled.
TRAP-TYPE    

alertControllerAlarmDisable 679
%s, %s alarm disabled.
TRAP-TYPE    

alertControllerRebuildRate 680
%s, rebuild rate changed to %s.
TRAP-TYPE    

alertArrayDiskForcedOnline 681
%s, %s forced online.
TRAP-TYPE    

alertArrayDiskForcedOffline 682
%s, %s forced offline.
TRAP-TYPE    

alertTaskBGI 683
%s, virtual disk %s background initialization started.
TRAP-TYPE    

alertCancelBGI 684
%s, virtual disk %s background initialization cancelled.
TRAP-TYPE    

alertFailBGI 685
%s, virtual disk %s background initialization failed.
TRAP-TYPE    

alertCompleteBGI 686
%s, virtual disk %s background initialization completed.
TRAP-TYPE    

enclosureGenericNotInstalled 687
%s, %s is not installed.
TRAP-TYPE    

pv660fEvent-PHYSDEV-ONLINE 700
A hard disk has been placed online.
TRAP-TYPE    

pv660fEvent-PHYSDEV-HOTSPARE 701
A hard disk added as hot spare.
TRAP-TYPE    

pv660fEvent-PHYSDEV-HARD-ERROR 702
Hard disk error found.
TRAP-TYPE    

pv660fEvent-PHYSDEV-PFA 703
Hard disk PFA condition found, this disk may fail soon.
TRAP-TYPE    

pv660fEvent-PHYSDEV-AUTO-REBUILD-START 704
An automatic rebuild has started.
TRAP-TYPE    

pv660fEvent-PHYSDEV-MANUAL-REBUILD-START 705
A rebuild has started.
TRAP-TYPE    

pv660fEvent-PHYSDEV-REBUILD-DONE 706
Rebuild is over.
TRAP-TYPE    

pv660fEvent-PHYSDEV-REBUILD-CANCELED 707
Rebuild is cancelled.
TRAP-TYPE    

pv660fEvent-PHYSDEV-REBUILD-ERROR 708
Rebuild stopped with error.
TRAP-TYPE    

pv660fEvent-PHYSDEV-REBUILD-NEWDEV-FAILED 709
Rebuild stopped with error. New device failed.
TRAP-TYPE    

pv660fEvent-PHYSDEV-REBUILD-SYSDEV-FAILED 710
Rebuild stopped because logical drive failed.
TRAP-TYPE    

pv660fEvent-PHYSDEV-DEAD 711
A hard disk has failed.
TRAP-TYPE    

pv660fEvent-PHYSDEV-FOUND 712
A new hard disk has been found.
TRAP-TYPE    

pv660fEvent-PHYSDEV-GONE 713
A hard disk has been removed.
TRAP-TYPE    

pv660fEvent-PHYSDEV-UNCONFIGURED 714
A previously configured disk is now available.
TRAP-TYPE    

pv660fEvent-PHYSDEV-EXPANDCAPACITY-START 715
Expand Capacity Started.
TRAP-TYPE    

pv660fEvent-PHYSDEV-EXPANDCAPACITY-DONE 716
Expand Capacity Completed.
TRAP-TYPE    

pv660fEvent-PHYSDEV-EXPANDCAPACITY-ERROR 717
Expand Capacity Stopped with error.
TRAP-TYPE    

pv660fEvent-PHYSDEV-COMMAND-TIMEOUT 718
SCSI command timeout on hard device.
TRAP-TYPE    

pv660fEvent-PHYSDEV-COMMAND-ABORT 719
SCSI command abort on hard disk.
TRAP-TYPE    

pv660fEvent-PHYSDEV-COMMAND-RETRIED 720
SCSI command retried on hard disk.
TRAP-TYPE    

pv660fEvent-PHYSDEV-PARITY-ERROR 721
Parity error found.
TRAP-TYPE    

pv660fEvent-PHYSDEV-SOFT-ERROR 722
Soft error found.
TRAP-TYPE    

pv660fEvent-PHYSDEV-MISC-ERROR 723
Misc error found.
TRAP-TYPE    

pv660fEvent-PHYSDEV-RESET 724
SCSI device reset.
TRAP-TYPE    

pv660fEvent-PHYSDEV-ACTIVESPARE 725
Active spare found.-
TRAP-TYPE    

pv660fEvent-PHYSDEV-WARMSPARE 726
Warm spare found.-
TRAP-TYPE    

pv660fEvent-PHYSDEV-REQSENSE 727
Request Sense Data available.
TRAP-TYPE    

pv660fEvent-PHYSDEV-INIT-STARTED 728
Initialization started.
TRAP-TYPE    

pv660fEvent-PHYSDEV-INIT-DONE 729
Initialization completed.
TRAP-TYPE    

pv660fEvent-PHYSDEV-INIT-FAILED 730
Initialization failed.
TRAP-TYPE    

pv660fEvent-PHYSDEV-INIT-CANCELED 731
Initialization canceled.
TRAP-TYPE    

pv660fEvent-PHYSDEV-WRITEREC-DEAD 732
A hard disk failed because write recovery failed.
TRAP-TYPE    

pv660fEvent-PHYSDEV-RESET-DEAD 733
A hard disk failed because SCSI bus reset failed.
TRAP-TYPE    

pv660fEvent-PHYSDEV-DBLCC-DEAD 734
A hard disk failed because double check condition occured.
TRAP-TYPE    

pv660fEvent-PHYSDEV-REMOVED-DEAD 735
A hard disk failed because device is missing.
TRAP-TYPE    

pv660fEvent-PHYSDEV-GROSSERR-DEAD 736
A hard disk failed because of gross error on SCSI processor.
TRAP-TYPE    

pv660fEvent-PHYSDEV-BADTAG-DEAD 737
A hard disk failed because of bad tag from the device.
TRAP-TYPE    

pv660fEvent-PHYSDEV-SCSITMO-DEAD 738
A hard disk failed because command to the device timed out.
TRAP-TYPE    

pv660fEvent-PHYSDEV-SYSRESET-DEAD 739
A hard disk failed because of the system reset.
TRAP-TYPE    

pv660fEvent-PHYSDEV-BSYPAR-DEAD 740
A hard disk failed because of busy status or parity error.
TRAP-TYPE    

pv660fEvent-PHYSDEV-BYCMD-DEAD 741
A hard disk set to failed state by host.
TRAP-TYPE    

pv660fEvent-PHYSDEV-SELTMO-DEAD 742
A hard disk failed because access to the device met with a selection time out.
TRAP-TYPE    

pv660fEvent-PHYSDEV-SEQERR-DEAD 743
A hard disk failed because of a sequence error in the SCSI bus phase handling.
TRAP-TYPE    

pv660fEvent-PHYSDEV-UNKNOWNSTS-DEAD 744
A hard disk failed because device returned an unknown status.
TRAP-TYPE    

pv660fEvent-PHYSDEV-NOTRDY-DEAD 745
A hard disk failed because device is not ready.
TRAP-TYPE    

pv660fEvent-PHYSDEV-MISSING-DEAD 746
A hard disk failed because device was not found on start up.
TRAP-TYPE    

pv660fEvent-PHYSDEV-CODWRFAIL-DEAD 747
A hard disk failed because write operation of the 'Configuration On Disk' failed.
TRAP-TYPE    

pv660fEvent-PHYSDEV-BDTWRFAIL-DEAD 748
A hard disk failed because write operation of 'Bad Data Table' failed.
TRAP-TYPE    

pv660fEvent-PHYSDEV-OFFLINE 749
Physical device status changed to offline.
TRAP-TYPE    

pv660fEvent-PHYSDEV-STANDBY 750
Physical device status changed to Hot Spare.
TRAP-TYPE    

pv660fEvent-PHYSDEV-REBUILD 751
Physical device status changed to rebuild.
TRAP-TYPE    

pv660fEvent-PHYSDEV-ID-MISMATCH 752
Physical device ID did not match.
TRAP-TYPE    

pv660fEvent-PHYSDEV-FAILED-START 753
Physical device failed to start.
TRAP-TYPE    

pv660fEvent-PHYSDEV-OFFSET-SET 754
Physical device negotiated different offset than config.
TRAP-TYPE    

pv660fEvent-PHYSDEV-SET-BUS-WIDTH 755
Physical device negotiated different bus width than config.
TRAP-TYPE    

pv660fEvent-PHYSDEV-MISSING-ONSTARTUP 756
Physical drive missing on startup.
TRAP-TYPE    

pv660fEvent-PHYSDEV-REBUILD-START-FAILED 757
Rebuild startup failed due to lower disk capacity.
TRAP-TYPE    

pv660fEvent-PHYSDEV-MOVING-TO-OTHER-CHN 758
Physical drive is switching from a channel to the other channel.
TRAP-TYPE    

pv660fEvent-PHYSDEV-OFFLINE-DEVICE-MADE-ONLINE 759
Temporary-Dead physical drive is automatically made online.
TRAP-TYPE    

pv660fEvent-PHYSDEV-STANDBY-REBUILD-START 760
A standby rebuild has started.
TRAP-TYPE    

pv660fEvent-FIBREDEV-LOOPID-SOFTADDR-OCCURRED 761
Device Loop Id Conflict (Soft Addressing) Detected.
TRAP-TYPE    

pv660fEvent-SYSDEV-CHECK-START 762
Consistency check is started.
TRAP-TYPE    

pv660fEvent-SYSDEV-CHECK-DONE 763
Consistency check is finished.
TRAP-TYPE    

pv660fEvent-SYSDEV-CHECK-CANCELED 764
Consistency check is cancelled.
TRAP-TYPE    

pv660fEvent-SYSDEV-CHECK-ERROR 765
Consistency check on logical drive error.
TRAP-TYPE    

pv660fEvent-SYSDEV-CHECK-SYSDEV-FAILED 766
Consistency check on logical drive failed.
TRAP-TYPE    

pv660fEvent-SYSDEV-CHECK-PHYSDEV-FAILED 767
Consistency check failed due to physical device failure.
TRAP-TYPE    

pv660fEvent-SYSDEV-OFFLINE 768
Logical drive has been made offline.
TRAP-TYPE    

pv660fEvent-SYSDEV-CRITICAL 769
Logical drive is critical.
TRAP-TYPE    

pv660fEvent-SYSDEV-ONLINE 770
Logical drive has been placed online.
TRAP-TYPE    

pv660fEvent-SYSDEV-AUTO-REBUILD-START 771
An automatic rebuild has started on logical drive.
TRAP-TYPE    

pv660fEvent-SYSDEV-MANUAL-REBUILD-START 772
A manual rebuild has started on logical drive.
TRAP-TYPE    

pv660fEvent-SYSDEV-REBUILD-DONE 773
Rebuild on logical drive is over.
TRAP-TYPE    

pv660fEvent-SYSDEV-REBUILD-CANCELED 774
Rebuild on logical drive is cancelled.
TRAP-TYPE    

pv660fEvent-SYSDEV-REBUILD-ERROR 775
Rebuild stopped with error.
TRAP-TYPE    

pv660fEvent-SYSDEV-REBUILD-NEWDEV-FAILED 776
Rebuild stopped with error. New device failed.
TRAP-TYPE    

pv660fEvent-SYSDEV-REBUILD-SYSDEV-FAILED 777
Rebuild stopped because logical drive failed.
TRAP-TYPE    

pv660fEvent-SYSDEV-INIT-STARTED 778
Logical drive initialization started.
TRAP-TYPE    

pv660fEvent-SYSDEV-INIT-DONE 779
Logical drive initialization done.
TRAP-TYPE    

pv660fEvent-SYSDEV-INIT-CANCELED 780
Logical drive initialization cancelled.
TRAP-TYPE    

pv660fEvent-SYSDEV-INIT-FAILED 781
Logical drive initialization failed.
TRAP-TYPE    

pv660fEvent-SYSDEV-FOUND 782
A logical drive has been found.
TRAP-TYPE    

pv660fEvent-SYSDEV-GONE 783
A logical drive has been deleted.
TRAP-TYPE    

pv660fEvent-SYSDEV-EXPANDCAPACITY-START 784
Expand Capacity Started.
TRAP-TYPE    

pv660fEvent-SYSDEV-EXPANDCAPACITY-DONE 785
Expand Capacity Completed.
TRAP-TYPE    

pv660fEvent-SYSDEV-EXPANDCAPACITY-ERROR 786
Expand Capacity stopped with error.
TRAP-TYPE    

pv660fEvent-SYSDEV-BADBLOCK 787
Bad Blocks found.
TRAP-TYPE    

pv660fEvent-SYSDEV-SIZECHANGED 788
System drive size changed.
TRAP-TYPE    

pv660fEvent-SYSDEV-TYPECHANGED 789
System drive type changed.
TRAP-TYPE    

pv660fEvent-SYSDEV-BADDATABLOCK 790
Bad data blocks found. Possible data loss.
TRAP-TYPE    

pv660fEvent-SYSDEV-WR-LUN-MAP 791
System drive LUN mapping has been written to config.
TRAP-TYPE    

pv660fEvent-SYSDEV-DATAREAD-FROM-BLOCK-IN-BDT 792
Attempt to read data from block that is marked in Bad Data Table
TRAP-TYPE    

pv660fEvent-SYSDEV-DATA-FOR-BLOCK-LOST 793
Data for Disk Block has been lost due to Logical Drive problem
TRAP-TYPE    

pv660fEvent-SYSDEV-OFFLINE-DEVICE-MADE-AVAILABLE-WITH-DATALOSS 794
Temporary-Offline RAID5/RAID3 array is available to the user again with the possibility of data loss in the array.
TRAP-TYPE    

pv660fEvent-SYSDEV-OFFLINE-DEVICE-MADE-AVAILABLE 795
Temporary-Offline RAID0+1/RAID1/RAID0/JBOD array is available to the user again.
TRAP-TYPE    

pv660fEvent-SYSDEV-STANDBY-REBUILD-START 796
An standby rebuild has started on logical drive.
TRAP-TYPE    

pv660fEvent-FMTFAN-FAILED 797
Fan failure.
TRAP-TYPE    

pv660fEvent-FMTFAN-OK 798
Fan has been restored.
TRAP-TYPE    

pv660fEvent-AEMI-FAN-FAILED 799
Fan failure.
TRAP-TYPE    

pv660fEvent-FMTFAN-NOTPRESENT 800
Storage cabinet fan is not present.
TRAP-TYPE    

pv660fEvent-FMTPOWER-FAILED 801
Power supply failure.
TRAP-TYPE    

pv660fEvent-FMTPOWER-OK 802
Power supply has been restored.
TRAP-TYPE    

pv660fEvent-AEMI-PWR-SUPPLY-FAILED 803
Power supply failure.
TRAP-TYPE    

pv660fEvent-FMTPOWER-NOTPRESENT 804
Storage cabinet power supply is not present.
TRAP-TYPE    

pv660fEvent-FMTHEAT-BAD 805
Over temperature. Temperature is above 70 degrees Celsius.
TRAP-TYPE    

pv660fEvent-FMTHEAT-CRITICAL 806
Temperature is above 50 degrees Celsius.
TRAP-TYPE    

pv660fEvent-FMTHEAT-OK 807
Normal temperature has been restored.
TRAP-TYPE    

pv660fEvent-AEMI-OVER-TEMPERATURE 808
Over temperature.
TRAP-TYPE    

pv660fEvent-FMTHEAT-NOTPRESENT 809
Storage cabinet temperature sensor is not present.
TRAP-TYPE    

pv660fEvent-FMTSTWK-FAILED 810
Storage Works enclosure reported failure state.
TRAP-TYPE    

pv660fEvent-FMTSTWK-CRITICAL 811
Storage Works enclosure reported critical state.
TRAP-TYPE    

pv660fEvent-FMTSTWK-OK 812
Storage Works enclosure reported normal state.
TRAP-TYPE    

pv660fEvent-FMT-UPS-DISABLED 813
Uninterruptible Power Supply Disabled.
TRAP-TYPE    

pv660fEvent-FMT-UPS-AC-FAIL 814
Uninterruptible Power Supply AC Failed.
TRAP-TYPE    

pv660fEvent-FMT-UPS-BAT-LOW 815
Uninterruptible Power Supply Battery Low.
TRAP-TYPE    

pv660fEvent-FMT-UPS-FAILED 816
Uninterruptible Power Supply Failed.
TRAP-TYPE    

pv660fEvent-FMT-UPS-OK 817
Uninterruptible Power Supply Normal.
TRAP-TYPE    

pv660fEvent-ENCLFAN-FAILED 818
Fan failure.
TRAP-TYPE    

pv660fEvent-ENCLFAN-OK 819
Fan has been restored.
TRAP-TYPE    

pv660fEvent-ENCLFAN-NOTPRESENT 820
Fan is not present.
TRAP-TYPE    

pv660fEvent-ENCLPOWER-FAILED 821
Power supply failure.
TRAP-TYPE    

pv660fEvent-ENCLPOWER-OK 822
Power supply has been restored.
TRAP-TYPE    

pv660fEvent-ENCLPOWER-NOTPRESENT 823
Power supply is not present.
TRAP-TYPE    

pv660fEvent-ENCLHEAT-BAD 824
Temperature is over safe limit. Failure imminent.
TRAP-TYPE    

pv660fEvent-ENCLHEAT-CRITICAL 825
Temperature is above working limit.
TRAP-TYPE    

pv660fEvent-ENCLHEAT-OK 826
Normal temperature has been restored.
TRAP-TYPE    

pv660fEvent-ENCLHEAT-NOTPRESENT 827
Temperature sensor is not present.
TRAP-TYPE    

pv660fEvent-ENCLACCESS-CRITICAL 828
Enclosure access critical.
TRAP-TYPE    

pv660fEvent-ENCLACCESS-OK 829
Enclosure access has been restored.
TRAP-TYPE    

pv660fEvent-ENCLACCESS-OFFLINE 830
Enclosure access is offline.
TRAP-TYPE    

pv660fEvent-ENCLSES-SOFTADDR-OCCURRED 831
Enclosure Soft Addressing Detected.
TRAP-TYPE    

pv660fEvent-ENCLACCESS-READY 832
Enclosure services ready
TRAP-TYPE    

pv660fEvent-ENCLHEAT-UNKNOWN 833
Access to temperature sensor has been lost.
TRAP-TYPE    

pv660fEvent-ENCLPOWER-UNKNOWN 834
Access to power supply status information has been lost.
TRAP-TYPE    

pv660fEvent-ENCLFAN-UNKNOWN 835
Access to fan status information has been lost.
TRAP-TYPE    

pv660fEvent-SYSTEM-STARTED 836
Array management server software started successfully.
TRAP-TYPE    

pv660fEvent-CTLDEV-WRITEBACK-ERROR 837
Write back error.
TRAP-TYPE    

pv660fEvent-CTLDEV-STATE-TABLE-FULL 838
Internal log structures getting full,PLEASE SHUTDOWN AND RESET THE SYSTEM IN THE NEAR FUTURE.
TRAP-TYPE    

pv660fEvent-CTLDEV-DEAD 839
Controller is dead. System is disconnecting from this controller.
TRAP-TYPE    

pv660fEvent-CTLDEV-RESET 840
Controller has been reset.
TRAP-TYPE    

pv660fEvent-CTLDEV-FOUND 841
Controller is found.
TRAP-TYPE    

pv660fEvent-CTLDEV-GONE 842
Controller is gone. System is disconnecting from this controller.
TRAP-TYPE    

pv660fEvent-CTLDEV-BBU-FOUND 843
BBU Present.
TRAP-TYPE    

pv660fEvent-CTLDEV-BBU-POWER-LOW 844
BBU Power Low.
TRAP-TYPE    

pv660fEvent-CTLDEV-BBU-POWER-OK 845
BBU Power OK.
TRAP-TYPE    

pv660fEvent-CTLDEV-POWER-OFF 846
Controller is powered off.
TRAP-TYPE    

pv660fEvent-CTLDEV-POWER-ON 847
Controller powered on
TRAP-TYPE    

pv660fEvent-CTLDEV-ONLINE 848
Controller is online.
TRAP-TYPE    

pv660fEvent-CTLDEV-OFFLINE 849
Controller is offline.
TRAP-TYPE    

pv660fEvent-CTLDEV-CRITICAL 850
Controller's partner is gone, controller is in failover mode now.
TRAP-TYPE    

pv660fEvent-CTLDEV-BBU-RECOND-START 851
BBU reconditioning is started.
TRAP-TYPE    

pv660fEvent-CTLDEV-BBU-RECOND-DONE 852
BBU reconditioning is finished.
TRAP-TYPE    

pv660fEvent-CTLDEV-BBU-RECOND-ABORT 853
BBU reconditioning is canceled.
TRAP-TYPE    

pv660fEvent-CTLDEV-INSTALLATION-ABORTED 854
Installation aborted.
TRAP-TYPE    

pv660fEvent-CTLDEV-FIRMWARE-MISMATCH 855
Controller firmware mismatch.
TRAP-TYPE    

pv660fEvent-CTLDEV-BBU-NORESPONSE 856
BBU removed.
TRAP-TYPE    

pv660fEvent-CTLDEV-WARM-BOOT-ERROR 857
WARM BOOT failed.
TRAP-TYPE    

pv660fEvent-CTLDEV-CONSERV-CACHE-MODE 858
Controller entered Conservative Cache Mode.
TRAP-TYPE    

pv660fEvent-CTLDEV-NORMAL-CACHE-MODE 859
Controller entered Normal Cache Mode.
TRAP-TYPE    

pv660fEvent-CTLDEV-DEV-START-CMPLT 860
Controller Device Start Complete.
TRAP-TYPE    

pv660fEvent-CTLDEV-SOFT-ECC-CORRECTED 861
Soft ECC error Corrected.
TRAP-TYPE    

pv660fEvent-CTLDEV-HARD-ECC-CORRECTED 862
Hard ECC error Corrected.
TRAP-TYPE    

pv660fEvent-CTLDEV-BBU-RECOND-NEEDED 863
BBU Recondition Suggested.
TRAP-TYPE    

pv660fEvent-CTLDEV-REMOVED-PTNR 864
Controller's Partner Has Been Removed.
TRAP-TYPE    

pv660fEvent-CTLDEV-BBU-OUT-OF-SERVICE 865
BBU out of service.
TRAP-TYPE    

pv660fEvent-CTLDEV-UPDATE-PTNR-STATUS 866
Updated partner's status.
TRAP-TYPE    

pv660fEvent-CTLDEV-RELINQUISH-PTNR 867
Relinquished partner.
TRAP-TYPE    

pv660fEvent-CTLDEV-INSERTED-PTNR 868
Inserted Partner.
TRAP-TYPE    

pv660fEvent-CTLDEV-DUAL-ENABLED 869
Dual Controllers Enabled.
TRAP-TYPE    

pv660fEvent-CTLDEV-KILL-PTNR 870
Killed Partner.
TRAP-TYPE    

pv660fEvent-CTLDEV-NEXUS 871
Dual Controllers entered Nexus.
TRAP-TYPE    

pv660fEvent-CTLDEV-BAD-BOOTROM-IMAGE 872
Controller Boot ROM Image needs to be reloaded.
TRAP-TYPE    

pv660fEvent-CTLDEV-BAD-MAC-ADDRESS 873
Controller is using default non-unique world-wide name.
TRAP-TYPE    

pv660fEvent-CTLDEV-MIRROR-RACE-RECOVERY-FAILED 874
Mirror Race recovery failed.
TRAP-TYPE    

pv660fEvent-CTLDEV-MIRROR-CRITICAL-DRIVE 875
Mirror Race on critical drive.
TRAP-TYPE    

pv660fEvent-SYSTEM-STARTED-NEW 876
System started.-
TRAP-TYPE    

pv660fEvent-SYSTEM-SIZE-TABLE-FULL 877
Size table full.
TRAP-TYPE    

pv660fEvent-SYSTEM-USER-LOGGED-IN 878
User logged in.
TRAP-TYPE    

pv660fEvent-SYSTEM-USER-LOGGED-OUT 879
User logged out.-
TRAP-TYPE    

pv660fEvent-SYSTEM-ALIVE 880
Server alive.
TRAP-TYPE    

pv660fEvent-SYSTEM-DEAD 881
Lost connection to server, or server is down.
TRAP-TYPE    

pv660fEvent-AUTOBOOT-CHANGED 882
Automatic reboot count has changed.
TRAP-TYPE    

pv660fEvent-CHANNEL-FAILED 883
Channel Failed.
TRAP-TYPE    

pv660fEvent-CHANNEL-OK 884
Channel Online.
TRAP-TYPE    

pv660fEvent-CHANNEL-SCSI-BUS-DEAD 885
Back End SCSI Bus Dead.
TRAP-TYPE    

pv660fEvent-CHANNEL-SCSI-BUS-ALIVE 886
Back End SCSI Bus Alive.
TRAP-TYPE    

pv660fEvent-CHANNEL-FIBER-DEAD 887
Back End Fibre Dead.
TRAP-TYPE    

pv660fEvent-CHANNEL-FIBER-ALIVE 888
Back End Fibre Alive.
TRAP-TYPE    

pv660fEvent-LOG-EMPTY 889
Event Log Empty.
TRAP-TYPE    

pv660fEvent-LOG-OUT-SYNC 890
Event Log Entries Lost.
TRAP-TYPE    

pv660fEvent-LOG-REQUEST-SENSE 891
Request Sense
TRAP-TYPE    

pv660fEvent-LOG-SET-RTC 892
Set Real Time Clock.
TRAP-TYPE    

pv660fEvent-CFG-NEW 893
New Configuration Received.
TRAP-TYPE    

pv660fEvent-CFG-CLEAR 894
Configuration Cleared.
TRAP-TYPE    

pv660fEvent-CFG-INVALID 895
Configuration Invalid.
TRAP-TYPE    

pv660fEvent-CFG-COD-ACCESS-ERROR 896
Configuration On Disk Access Error.
TRAP-TYPE    

pv660fEvent-CFG-COD-CONVERTED 897
Configuration On Disk Converted.
TRAP-TYPE    

pv660fEvent-CFG-COD-IMPORT-FAILED 898
Configuration On Disk Import Failed.
TRAP-TYPE    

pv660fEvent-DEBUG-DUMP-GENERATED 899
A Debug Dump exists on this system.
TRAP-TYPE    

pv660fEvent-DEBUG-DUMP-GENERATED-PARTNER 900
A Debug Dump exists on this system.
TRAP-TYPE    

pv660fEvent-FATAL-HANG 901
Internal Controller is in the hung state.
TRAP-TYPE    

pv660fEvent-FATAL-BRKP 902
Internal Controller has encountered a Firmware breakpoint.
TRAP-TYPE    

pv660fEvent-I960-HW-ERR 903
Internal Controller has encountered i960 processor specific error.
TRAP-TYPE    

pv660fEvent-SARM-HW-ERR 904
Internal Controller has encountered Strong-ARM processor specific error
TRAP-TYPE    

pv660fEvent-SYSDEV-BG-INIT-STARTED 905
Logical drive background initialization started.
TRAP-TYPE    

pv660fEvent-SYSDEV-BG-INIT-STOPPED 906
Logical drive background initialization stopped.
TRAP-TYPE    

pv660fEvent-SYSDEV-BG-INIT-PAUSED 907
Logical drive background initialization paused.
TRAP-TYPE    

pv660fEvent-SYSDEV-BG-INIT-RESTARTED 908
Logical drive background initialization restarted.
TRAP-TYPE    

pv660fEvent-SYSDEV-BG-INIT-FAILED 909
Logical drive background initialization failed.
TRAP-TYPE    

pv660fEvent-SYSDEV-BG-INIT-COMPLETED 910
Logical drive background initialization completed.
TRAP-TYPE    

pv660fEvent-CTLDEV-BBU-CALIBRATE-START 911
BBU calibration cycle started.
TRAP-TYPE    

pv660fEvent-CTLDEV-BBU-CALIBRATE-DONE 912
BBU calibration cycle finished.
TRAP-TYPE    

pv660fEvent-CTLDEV-BBU-CALIBRATE-ABORT 913
BBU calibration cycle is canceled.
TRAP-TYPE    

pv660fEvent-CTLDEV-BBU-NO-BATTERY 914
BBU battery not present.
TRAP-TYPE    

pv660fEvent-SYSDEV-BBULOW-POSSIBLE-DATA-LOSS 915
Low battery charge level. Logical drive may have lost data.
TRAP-TYPE    

pv660fEvent-CTLDEV-IN-CLUSTER 916
Controller connected to cluster.
TRAP-TYPE    

pv660fEvent-CTLDEV-NOT-IN-CLUSTER 917
Controller disconnected from cluster.
TRAP-TYPE    

pv660fEvent-CTLDEV-IMPROPERLY-SHUTDOWN 918
Controller improperly shutdown! Data may have been lost.
TRAP-TYPE    

pv660fEvent-CTLDEV-AUTOMATIC-FLASH-STARTED 919
Dual Active Automatic Flash of Replacement Controller.
TRAP-TYPE    

pv660fEvent-CTLDEV-NEGOTIATION-FAILED-JUMPERS 920
Dual Active Negotiation failed jumpers.
TRAP-TYPE    

pv660fEvent-CTLDEV-NEGOTIATION-SAME-ID 921
Dual Active Negotiation failed ID's.
TRAP-TYPE    

pv660fEvent-CTLDEV-NEGOTIATION-BOARD-TYPE 922
Dual Active Negotiation failed board types.
TRAP-TYPE    

pv660fEvent-CTLDEV-NEGOTIATION-DISK-CHANNELS 923
Dual Active Negotiation failed disk channels.
TRAP-TYPE    

pv660fEvent-CTLDEV-NEGOTIATION-HOST-CHANNELS 924
Dual Active Negotiation failed host ports.
TRAP-TYPE    

pv660fEvent-CTLDEV-NEGOTIATION-MEMORY-SIZE 925
Dual Active Negotiation failed memory size.
TRAP-TYPE    

pv660fEvent-CTLDEV-NEGOTIATION-CACHE-SIZE 926
Dual Active Negotiation failed cache memory size.
TRAP-TYPE    

pv660fEvent-PHYSDEV-HOT-SPARE-SMALLER 927
Hot spare replaced with a smaller capacity drive.
TRAP-TYPE    

pv660fEvent-SES-ERR 980
Controller failed, SES not operational. This trap is similar to 981 but may occur for older firmware versions.
TRAP-TYPE    

pv660fEvent-ENC-SES-ERR 981
Unable to get enclosure status. Doing a PV660F Subsystem rescan may resolve this problem. This trap is similar to 980 but may occur for more recent firmware versions.
TRAP-TYPE    

fsysPro-DISK-CAPACITY-WARNING 10804
Free disk space has reached warning threshold on volume %s.
TRAP-TYPE    

fsysPro-DISK-CAPACITY-ERROR 10805
Free disk space has reached error threshold on volume %s.
TRAP-TYPE