AtiL2-MIB

File: AtiL2-MIB.mib (118114 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1215
RFC-1212

Imported symbols

enterprises Counter IpAddress
TimeTicks DisplayString TRAP-TYPE
OBJECT-TYPE

Defined Types

MacAddress  
OCTET STRING Size(6)    

BridgeId  
OCTET STRING Size(8)    

Timeout  
INTEGER    

AtiL2NwMgrEntry  
SEQUENCE    
  atiL2NwMgrIndex INTEGER
  atiL2NwMgrIpAddr IpAddress

AtiL2deviceEntry  
SEQUENCE    
  atiL2deviceIndex INTEGER
  atiL2deviceDescr DisplayString
  atiL2deviceProductType INTEGER
  atiL2devicePortCount INTEGER
  atiL2deviceSecurityConfig INTEGER
  atiL2deviceSecurityAction INTEGER
  atiL2deviceDebugAvailableBytes INTEGER
  atiL2deviceMDA1Type INTEGER
  atiL2deviceMDA2Type INTEGER
  atiL2deviceReset INTEGER

AtiL2EthMonStatsEntry  
SEQUENCE    
  atiL2EthMonModuleId INTEGER
  atiL2EthMonRxGoodFrames Counter
  atiL2EthMonTxGoodFrames Counter
  atiL2EthMonTxTotalBytes Counter
  atiL2EthMonTxDeferred Counter
  atiL2EthMonTxCollisions Counter
  atiL2EthMonTxBroadcastFrames Counter
  atiL2EthMonTxMulticastFrames Counter
  atiL2EthMonRxOverruns Counter

AtiL2EthPortMonStatsEntry  
SEQUENCE    
  atiL2EthPortMonModuleId INTEGER
  atiL2EthPortMonPortId INTEGER
  atiL2EthPortMonRxGoodFrames Counter
  atiL2EthPortMonTxGoodFrames Counter
  atiL2EthPortMonTxTotalBytes Counter
  atiL2EthPortMonTxDeferred Counter
  atiL2EthPortMonTxCollisions Counter
  atiL2EthPortMonTxBroadcastFrames Counter
  atiL2EthPortMonTxMulticastFrames Counter
  atiL2EthPortMonRxOverruns Counter

AtiL2EthErrStatsEntry  
SEQUENCE    
  atiL2EthErrModuleId INTEGER
  atiL2EthErrorCRC Counter
  atiL2EthErrorAlignment Counter
  atiL2EthErrorRxBadFrames Counter
  atiL2EthErrorLateCollisions Counter
  atiL2EthErrorTxTotal Counter

AtiL2EthPortErrStatsEntry  
SEQUENCE    
  atiL2EthPortErrModuleId INTEGER
  atiL2EthPortErrPortId INTEGER
  atiL2EthPortErrorCRC Counter
  atiL2EthPortErrorAlignment Counter
  atiL2EthPortErrorRxBadFrames Counter
  atiL2EthPortErrorLateCollisions Counter
  atiL2EthPortErrorTxTotal Counter

AtiL2DevicePortEntry  
SEQUENCE    
  atiL2DeviceId INTEGER
  atiL2DevicePortNumber INTEGER
  atiL2DevicePortName DisplayString
  atiL2DevicePortAutosenseOrHalfDuplex INTEGER
  atiL2DevicePortLinkState INTEGER
  atiL2DevicePortDuplexStatus INTEGER
  atiL2DevicePortSpeed INTEGER
  atiL2DevicePortState INTEGER
  atiL2DevicePortTransmitPacingConfig INTEGER
  atiL2DevicePortSTPConfig INTEGER
  atiL2DevicePortBridgeid INTEGER
  atiL2DevicePortSTPCost INTEGER
  atiL2DevicePortSTPPriority INTEGER
  atiL2DevicePortFlowControlEnable INTEGER
  atiL2DevicePortBackPressureEnable INTEGER
  atiL2DevicePortVlanTagPriorityConfig INTEGER
  atiL2DevicePortQOSPriorityConfig INTEGER

AtiL2BasicVlanEntry  
SEQUENCE    
  atiL2BeVlanIndex INTEGER
  atiL2BeVlanName DisplayString
  atiL2BeVlanTagId INTEGER
  atiL2BeVlanModule1UntaggedPorts DisplayString
  atiL2BeVlanModule1TaggedPorts DisplayString
  atiL2BeVlanModule2UntaggedPorts DisplayString
  atiL2BeVlanModule2TaggedPorts DisplayString
  atiL2BeVlanModule3UntaggedPorts DisplayString
  atiL2BeVlanModule3TaggedPorts DisplayString
  atiL2BeVlanModule4UntaggedPorts DisplayString
  atiL2BeVlanModule4TaggedPorts DisplayString
  atiL2BeVlanModule5UntaggedPorts DisplayString
  atiL2BeVlanModule5TaggedPorts DisplayString
  atiL2BeVlanModule6UntaggedPorts DisplayString
  atiL2BeVlanModule6TaggedPorts DisplayString
  atiL2BeVlanModule7UntaggedPorts DisplayString
  atiL2BeVlanModule7TaggedPorts DisplayString
  atiL2BeVlanModule8UntaggedPorts DisplayString
  atiL2BeVlanModule8TaggedPorts DisplayString
  atiL2BeVlanRowStatus INTEGER

AtiL2Port2VlanEntry  
SEQUENCE    
  atiL2PvModuleId INTEGER
  atiL2PvPortNumber INTEGER
  atiL2PvVlanName DisplayString

AtiIfExtnEntry  
SEQUENCE    
  atiIfExtnIndex INTEGER
  atiIfExtnModuleId INTEGER
  atiIfExtnPort INTEGER

AtiL2BrBaseEntry  
SEQUENCE    
  atiL2BrBaseLanId INTEGER
  atiL2BrBaseBridgeAddress MacAddress
  atiL2BrBaseNumPorts INTEGER
  atiL2BrBaseType INTEGER

AtiL2BrBasePortEntry  
SEQUENCE    
  atiL2BrBasePortLanId INTEGER
  atiL2BrBasePort INTEGER
  atiL2BrBasePortIfIndex INTEGER
  atiL2BrBasePortCircuit OBJECT IDENTIFIER
  atiL2BrBasePortDelayExceededDiscards Counter
  atiL2BrBasePortMtuExceededDiscards Counter

AtiL2BrStpEntry  
SEQUENCE    
  atiL2BrStpLanId INTEGER
  atiL2BrStpProtocolSpecification INTEGER
  atiL2BrStpPriority INTEGER
  atiL2BrStpTimeSinceTopologyChange TimeTicks
  atiL2BrStpTopChanges Counter
  atiL2BrStpDesignatedRoot BridgeId
  atiL2BrStpRootCost INTEGER
  atiL2BrStpRootPort INTEGER
  atiL2BrStpMaxAge Timeout
  atiL2BrStpHelloTime Timeout
  atiL2BrStpHoldTime INTEGER
  atiL2BrStpForwardDelay Timeout
  atiL2BrStpBridgeMaxAge Timeout
  atiL2BrStpBridgeHelloTime Timeout
  atiL2BrStpBridgeForwardDelay Timeout

AtiL2BrStpPortEntry  
SEQUENCE    
  atiL2BrStpPortLanId INTEGER
  atiL2BrStpPort INTEGER
  atiL2BrStpPortPriority INTEGER
  atiL2BrStpPortState INTEGER
  atiL2BrStpPortEnable INTEGER
  atiL2BrStpPortPathCost INTEGER
  atiL2BrStpPortDesignatedRoot BridgeId
  atiL2BrStpPortDesignatedCost INTEGER
  atiL2BrStpPortDesignatedBridge BridgeId
  atiL2BrStpPortDesignatedPort OCTET STRING
  atiL2BrStpPortForwardTransitions Counter

AtiL2BrTpEntry  
SEQUENCE    
  atiL2BrTpLanId INTEGER
  atiL2BrTpLearnedEntryDiscards Counter
  atiL2BrTpAgingTime INTEGER

AtiL2BrTpFdbEntry  
SEQUENCE    
  atiL2BrTpFdbLanId INTEGER
  atiL2BrTpFdbAddress MacAddress
  atiL2BrTpFdbPort INTEGER
  atiL2BrTpFdbStatus INTEGER

AtiL2BrTpPortEntry  
SEQUENCE    
  atiL2BrTpPortLanId INTEGER
  atiL2BrTpPort INTEGER
  atiL2BrTpPortMaxInfo INTEGER
  atiL2BrTpPortInFrames Counter
  atiL2BrTpPortOutFrames Counter
  atiL2BrTpPortInDiscards Counter

AtiL2TrafficMappingEntry  
SEQUENCE    
  atiL2TrafficClassIndex INTEGER
  atiL2PriorityQueue INTEGER

Defined Values

alliedTelesyn 1.3.6.1.4.1.207
OBJECT IDENTIFIER    

atiProduct 1.3.6.1.4.1.207.1
OBJECT IDENTIFIER    

swhub 1.3.6.1.4.1.207.1.4
OBJECT IDENTIFIER    

at-8324 1.3.6.1.4.1.207.1.4.37
OBJECT IDENTIFIER    

at-8124XL-V2 1.3.6.1.4.1.207.1.4.52
OBJECT IDENTIFIER    

at-8326GB 1.3.6.1.4.1.207.1.4.72
OBJECT IDENTIFIER    

at-9410GB 1.3.6.1.4.1.207.1.4.73
OBJECT IDENTIFIER    

at-8350GB 1.3.6.1.4.1.207.1.4.74
OBJECT IDENTIFIER    

at-8316F 1.3.6.1.4.1.207.1.4.77
OBJECT IDENTIFIER    

mibObject 1.3.6.1.4.1.207.8
OBJECT IDENTIFIER    

atiL2Mib 1.3.6.1.4.1.207.8.33
OBJECT IDENTIFIER    

atiL2GlobalGroup 1.3.6.1.4.1.207.8.33.1
OBJECT IDENTIFIER    

atiL2IpGroup 1.3.6.1.4.1.207.8.33.2
OBJECT IDENTIFIER    

atiL2NMGroup 1.3.6.1.4.1.207.8.33.3
OBJECT IDENTIFIER    

atiL2DHCPGroup 1.3.6.1.4.1.207.8.33.4
OBJECT IDENTIFIER    

atiL2DeviceGroup 1.3.6.1.4.1.207.8.33.5
OBJECT IDENTIFIER    

atiL2EthernetStatsGroup 1.3.6.1.4.1.207.8.33.6
OBJECT IDENTIFIER    

atiL2DevicePortConfigGroup 1.3.6.1.4.1.207.8.33.7
OBJECT IDENTIFIER    

atiL2VlanConfigGroup 1.3.6.1.4.1.207.8.33.8
OBJECT IDENTIFIER    

atiL2IfExt 1.3.6.1.4.1.207.8.33.9
OBJECT IDENTIFIER    

atiL2BridgeMib 1.3.6.1.4.1.207.8.33.10
OBJECT IDENTIFIER    

atiL2BrBase 1.3.6.1.4.1.207.8.33.10.1
OBJECT IDENTIFIER    

atiL2BrStp 1.3.6.1.4.1.207.8.33.10.2
OBJECT IDENTIFIER    

atiL2BrTp 1.3.6.1.4.1.207.8.33.10.3
OBJECT IDENTIFIER    

atiL2TrapAttrGroup 1.3.6.1.4.1.207.8.33.11
OBJECT IDENTIFIER    

atiL2QOSConfigGroup 1.3.6.1.4.1.207.8.33.12
OBJECT IDENTIFIER    

atiL2SwProduct 1.3.6.1.4.1.207.8.33.1.1
Identifies the software product the device is running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

atiL2SwVersion 1.3.6.1.4.1.207.8.33.1.2
Identifies the version number of the present release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

atiL2Reset 1.3.6.1.4.1.207.8.33.1.3
Object use to reset all the Modules globally.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER switch-no-reset(1), switch-reset(2)  

atiL2MirroringSourceModule 1.3.6.1.4.1.207.8.33.1.4
This is the mirror source module number. If the atiL2EthConfigMirrorState is Enabled then the mirror source module/port data gets routed to the mirror destination module/port. Both transmitted and recieved source activity is mirrored to the destination. This arrangement is to put an RMON Probe on the destination port to probe the traffic on the Source port. This object will return a '0' if the MirrorState is not enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

atiL2MirroringSourcePort 1.3.6.1.4.1.207.8.33.1.5
This is the Source port number for which there is another mirror port.If the atiL2EthConfigMirrorState is Enabled then the mirror portgets routed with all the packets going in and out of Source port. This arrangement is to put an RMON Probe on mirrored port to Probe the traffic on the Source port. One of the port is dedicated to this so that for any port as source port, this dedicated port can be a mirrored port. This object will return a '0' if the MirrorState is not enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

atiL2MirroringDestinationModule 1.3.6.1.4.1.207.8.33.1.6
This is the mirror destination module number. If the atiL2EthConfigMirrorState is Enabled then the mirror source module/port data gets routed to the mirror destination module/port. Both transmitted and recieved source activity is mirrored to the destination. This arrangement is to put an RMON Probe on the destination port to probe the traffic on the Source port. This object will return a '0' if the MirrorState is not enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

atiL2MirroringDestinationPort 1.3.6.1.4.1.207.8.33.1.7
This is the Destination port number for which there is another mirror port.If the atiL2EthConfigMirrorState is Enabled then,the mirror portgets routed with all the packets going in and out of Destination port. This arrangement is to put an RMON Probe on mirrored port to Probe the traffic on the Destination port. One of the port is dedicated to this so that for any port as destination port, this dedicated port can be a mirrored port. This object will return a '0' if the MirrorState is not enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

atiL2MirrorState 1.3.6.1.4.1.207.8.33.1.8
if the state of Mirroring is enabled by selecting one of the two values , then the Mirroring explained above works. If disabled, port operation works normally. No Traffic gets routed from MirroringSourcePort to Destination Mirrored Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER receive-and-transmit(1), disabled(2)  

atiL2IGMPState 1.3.6.1.4.1.207.8.33.1.9
This attribute allows an administrative request to configure IGMP
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

atiL2DeviceNumber 1.3.6.1.4.1.207.8.33.1.10
The total number of devices in the stack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2CurrentIpAddress 1.3.6.1.4.1.207.8.33.2.1
The Current IP address is the one which is currently used and is obtained dynamically through one of the protocols interaction.( DHCP or Bootp.) This address is NULL if the Address is Statically configured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

atiL2ConfiguredIpAddress 1.3.6.1.4.1.207.8.33.2.2
The Configured IP address of the device. This is the address configured through Network or Local Omega.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

atiL2ConfiguredSubnetMask 1.3.6.1.4.1.207.8.33.2.3
The Configured Subnet Mask of the device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

atiL2ConfiguredRouter 1.3.6.1.4.1.207.8.33.2.4
The Configured Gateway/Router address of the device
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

atiL2IPAddressStatus 1.3.6.1.4.1.207.8.33.2.5
The IP Address can be obtained/configured by any of the above different ways. This object specifies how IP address currently on the switch Box, was configured/obtained.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER from-dhcp(1), from-bootp(2), from-psuedoip(3), from-Omega(4)  

atiL2DNServer 1.3.6.1.4.1.207.8.33.2.6
The Configured DNS Server address of the device
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

atiL2DefaultDomainName 1.3.6.1.4.1.207.8.33.2.7
This Object defines the Default Domain where this switch can be belong to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

atiL2NwMgrTable 1.3.6.1.4.1.207.8.33.3.1
A list of SNMP Trap Manager stations Entries. The number of entries is given by the switchNwMgrTotal mib object.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2NwMgrEntry

atiL2NwMgrEntry 1.3.6.1.4.1.207.8.33.3.1.1
Trap receipt Manager Entry containing ipaddress of the configured NMS's to which Traps are sent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2NwMgrEntry  

atiL2NwMgrIndex 1.3.6.1.4.1.207.8.33.3.1.1.1
The Index of the Managers Ip address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

atiL2NwMgrIpAddr 1.3.6.1.4.1.207.8.33.3.1.1.2
The IP Address of the NMS host configured.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

atiL2DHCPSysGroup 1.3.6.1.4.1.207.8.33.4.1
OBJECT IDENTIFIER    

atiL2DHCPTimerGroup 1.3.6.1.4.1.207.8.33.4.2
OBJECT IDENTIFIER    

atiL2DHCPCurrentDHCPClientAddress 1.3.6.1.4.1.207.8.33.4.1.1
Current IP address of the client. To start with,it might be null. This is filled by the server when sending a DHCPOFFER and the client uses the most comfortable offer from offers sent by different DHCP servers. A DHCPREQUEST packet is sent with the Client address agreed upon to the selected server ( Broadcast). Server Acks back this packet which is where Client/Server moves to the Bound state. Once reached into Bound state, the client address is made the official address on the client.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

atiL2DHCPSubnetMask 1.3.6.1.4.1.207.8.33.4.1.2
When the client/server reaches the BOUND state, this is one of the parameters set by the server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

atiL2DHCPCurrentRelayAgentAddress 1.3.6.1.4.1.207.8.33.4.1.3
The IP address of the DHCP relay Agent on the same subnet. Normally there will be no DHCP server on each of the subnet and this Relay Agent will act in sending server across the subnets. There might not be any relay agent. This depends on the network Toplogy like where is the DHCP server and DHCP client.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

atiL2DHCPNextDHCPServerAddress 1.3.6.1.4.1.207.8.33.4.1.4
The IP address of the next DHCP server to be used during bootstrap. This address is sent by the DHCP server in the messages DHCPOFFER, DHCPACK,DHCPNACK.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

atiL2DHCPLeaseTimer 1.3.6.1.4.1.207.8.33.4.2.1
When the client/server reaches the BOUND state, this is one of the parameters set by the server. The lease time period in seconds for the DHCP client for using IP address on lease from the server. At the end of 50% of this timer a renewal request is sent by the client . This is the next Object atiL2DHCPReacquisitionTimer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

atiL2DHCPReacquisitionTimer 1.3.6.1.4.1.207.8.33.4.2.2
When the client/server reaches the BOUND state, this is one of the parameters set by the server. Mentioned in RFC2131 4.4.5 as T1, this renewal time period in secs for the DHCP client is for using IP address on lease from the server Once the Reacquisition Timer period in secs after the lease period is reached, the client sends a DHCPREQUEST to the DHCP server requesting for renewal of the lease. Default would be 50% of the Lease timer which is represeneted by the above object. The client moves from BOUND to RENEW state once the DHCPREQUEST is sent after time T1 secs is passed from the start of to release time. T1 is always less than T2 ( see below for 'T2') which is less than the lease Timer period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

atiL2DHCPExpirationTimer 1.3.6.1.4.1.207.8.33.4.2.3
When the client/server reaches the BOUND state, this is one of the parameters set by the server. Mentioned in RFC2131 4.4.5 as T2,this Expiration time period in secs is the time period in secs during which DHCP has gone through the BOUND->RENEWAL state. After T1 secs and when the state machine reaches T2 secs, ( T1 < T2 < lease period), DHCP client sends another DHCPREQUEST to the server asking the server to renew the lease for the IP parameters. By default it would be 87.5% of the Lease timer .If there is DHCPACK then the DHCP client moves from REBIND to BOUND. Else it moves to INIT state where it starts all over again sending a request for DHCPDISCOVER.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

atiL2deviceTable 1.3.6.1.4.1.207.8.33.5.1
The table contains the mapping of all devices in the chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2deviceEntry

atiL2deviceEntry 1.3.6.1.4.1.207.8.33.5.1.1
The device entry in the DeviceTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2deviceEntry  

atiL2deviceIndex 1.3.6.1.4.1.207.8.33.5.1.1.2
The Slot number in the chassis where the device is installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

atiL2deviceDescr 1.3.6.1.4.1.207.8.33.5.1.1.3
A textual description of the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

atiL2deviceProductType 1.3.6.1.4.1.207.8.33.5.1.1.4
This object will return Product Type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER at-8324(1), at-8316F(2), at-8124XL-V2(3), at-8326GB(4), at-9410GB(5), at-8350GB(6), other(20)  

atiL2devicePortCount 1.3.6.1.4.1.207.8.33.5.1.1.5
The number of ports contained within the device. Valid range is 1-32. Within each device, the ports are uniquely numbered in the range from 1 to maxportCapacity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1024  

atiL2deviceSecurityConfig 1.3.6.1.4.1.207.8.33.5.1.1.6
Security feature configuration Object.The Security disable would let the device carry on the learn-new-address-as-it-comes-in mode as usual.When security is enabled-with-learning-locked, the learning of new address is stopped and the addresses locked in the device is used as the security Database. If an address comes in which is not present in the Device Security Database, then any of the atiL2SecurityAction Configured is triggered. When limited-enabled is selected, a per-port atiL2PortSecurityNumberOfAddresses specify the max number of MACs to be learned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enabled-with-learning-locked(2), limited-enabled(3)  

atiL2deviceSecurityAction 1.3.6.1.4.1.207.8.33.5.1.1.7
Security Action to be carried when the atiL2SecurityConfig is enabled-with-learning-locked or limted-enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER send-trap-only(1), disable-port-only(2), disable-port-and-send-trap(3), do-nothing(4)  

atiL2deviceDebugAvailableBytes 1.3.6.1.4.1.207.8.33.5.1.1.8
This is strictly for Debug reason and this object should not be believed as the correct number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2deviceMDA1Type 1.3.6.1.4.1.207.8.33.5.1.1.9
This object returns the MDA type of the Uplink port. The values of 1 and 2 are the only one present in 81XX. 82XX has all the values supported. This object returns the MDA type of the Uplink Port named 'A'. It returns 'none' if a 'A' MDA slot is not installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ten-100rj45-mii(1), hundredfiber-mii(2), oneGb-rj45(3), oneGb-Fiber(4), none(5)  

atiL2deviceMDA2Type 1.3.6.1.4.1.207.8.33.5.1.1.10
This Object is supported in 81XX 82XX product lines. The values of 1 and 2 are the only one present in 81XX. 82XX has all the values supported. This object returns the MDA type of the Uplink Port named 'B'. It returns 'none' if a 'B' MDA slot is not installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ten-100rj45-mii(1), hundredfiber-mii(2), oneGb-rj45(3), oneGb-Fiber(4), none(5)  

atiL2deviceReset 1.3.6.1.4.1.207.8.33.5.1.1.11
Setting this object to 'switch-reset' will cause the switch to perform a hardware reset within approximately 4-6 seconds. Setting this object to 'switch-no-reset will have no effect. The value 'no-reset' will be returned whenever this object is retrieved.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER switch-no-reset(1), switch-reset(2)  

atiL2EthMonStatsGroup 1.3.6.1.4.1.207.8.33.6.1
OBJECT IDENTIFIER    

atiL2EthErrStatsGroup 1.3.6.1.4.1.207.8.33.6.2
OBJECT IDENTIFIER    

atiL2EthMonStatsTable 1.3.6.1.4.1.207.8.33.6.1.1
A list of statistics entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2EthMonStatsEntry

atiL2EthMonStatsEntry 1.3.6.1.4.1.207.8.33.6.1.1.1
A collection of statistics kept for a particular port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2EthMonStatsEntry  

atiL2EthMonModuleId 1.3.6.1.4.1.207.8.33.6.1.1.1.1
This Object Identifies the Module Id for which the Statistics is collected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2EthMonRxGoodFrames 1.3.6.1.4.1.207.8.33.6.1.1.1.2
The total number of Good Frames received on this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthMonTxGoodFrames 1.3.6.1.4.1.207.8.33.6.1.1.1.3
The total number of Good Frames Transmitted by this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthMonTxTotalBytes 1.3.6.1.4.1.207.8.33.6.1.1.1.4
The total number of Bytes transmitted from this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthMonTxDeferred 1.3.6.1.4.1.207.8.33.6.1.1.1.5
This is the count of first time Transmission attempt which failed on an interface due to medium being busy.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthMonTxCollisions 1.3.6.1.4.1.207.8.33.6.1.1.1.6
The total number of collisions while switching on an interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthMonTxBroadcastFrames 1.3.6.1.4.1.207.8.33.6.1.1.1.7
The total number of Transmit Broadcast Frames while switching on an interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthMonTxMulticastFrames 1.3.6.1.4.1.207.8.33.6.1.1.1.8
The total number of Transmit Multicast while switching on an interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthMonRxOverruns 1.3.6.1.4.1.207.8.33.6.1.1.1.9
The total number of Recieved Overrun Frames while switching on an interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthPortMonStatsTable 1.3.6.1.4.1.207.8.33.6.1.2
A list of statistics entries per Port on a Module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2EthPortMonStatsEntry

atiL2EthPortMonStatsEntry 1.3.6.1.4.1.207.8.33.6.1.2.1
A collection of statistics kept for a particular port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2EthPortMonStatsEntry  

atiL2EthPortMonModuleId 1.3.6.1.4.1.207.8.33.6.1.2.1.1
This Object Identifies the Module Id for which the Statistics is collected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2EthPortMonPortId 1.3.6.1.4.1.207.8.33.6.1.2.1.2
This Object Identifies the Port on the Module recognised by EthMonPortModuleId for which the Statistics is collected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2EthPortMonRxGoodFrames 1.3.6.1.4.1.207.8.33.6.1.2.1.3
The total number of Good Frames received on this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthPortMonTxGoodFrames 1.3.6.1.4.1.207.8.33.6.1.2.1.4
The total number of Good Frames Transmitted by this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthPortMonTxTotalBytes 1.3.6.1.4.1.207.8.33.6.1.2.1.5
The total number of Bytes transmitted from this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthPortMonTxDeferred 1.3.6.1.4.1.207.8.33.6.1.2.1.6
This is the count of first time Transmission attempt which failed on an interface due to medium being busy.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthPortMonTxCollisions 1.3.6.1.4.1.207.8.33.6.1.2.1.7
The total number of collisions while switching on an interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthPortMonTxBroadcastFrames 1.3.6.1.4.1.207.8.33.6.1.2.1.8
The total number of Transmit Broadcast Frames on this port and Module while switching on an interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthPortMonTxMulticastFrames 1.3.6.1.4.1.207.8.33.6.1.2.1.9
The total number of Transmit Multicast on this port and Module while switching on an interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthPortMonRxOverruns 1.3.6.1.4.1.207.8.33.6.1.2.1.10
The total number of Recieved Overrun Frames on this port and Module while switching on an interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthErrStatsTable 1.3.6.1.4.1.207.8.33.6.2.1
A list of statistics entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2EthErrStatsEntry

atiL2EthErrorStatsEntry 1.3.6.1.4.1.207.8.33.6.2.1.1
A collection of statistics kept for a particular port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2EthErrStatsEntry  

atiL2EthErrModuleId 1.3.6.1.4.1.207.8.33.6.2.1.1.1
This Object Identifies the Module Id for which the Statistics is collected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2EthErrorCRC 1.3.6.1.4.1.207.8.33.6.2.1.1.2
The total number of CRC errors on received packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthErrorAlignment 1.3.6.1.4.1.207.8.33.6.2.1.1.3
The total number of packets received that has alignment errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthErrorRxBadFrames 1.3.6.1.4.1.207.8.33.6.2.1.1.4
The counter is incremented when a bad frame was received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthErrorLateCollisions 1.3.6.1.4.1.207.8.33.6.2.1.1.5
This object counts the number of times the collison was detected in the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthErrorTxTotal 1.3.6.1.4.1.207.8.33.6.2.1.1.6
Total number of error resulted from transfer operations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthPortErrStatsTable 1.3.6.1.4.1.207.8.33.6.2.2
A list of statistics entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2EthPortErrStatsEntry

atiL2EthPortErrorStatsEntry 1.3.6.1.4.1.207.8.33.6.2.2.1
A collection of statistics kept for a particular port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2EthPortErrStatsEntry  

atiL2EthPortErrModuleId 1.3.6.1.4.1.207.8.33.6.2.2.1.1
This Object Identifies the Module Id for which the Statistics is collected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2EthPortErrPortId 1.3.6.1.4.1.207.8.33.6.2.2.1.2
This Object Identifies the Port on the Module recognised by the above Object for which the Statistics is collected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2EthPortErrorCRC 1.3.6.1.4.1.207.8.33.6.2.2.1.3
The total number of CRC errors on received packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthPortErrorAlignment 1.3.6.1.4.1.207.8.33.6.2.2.1.4
The total number of packets received that has alignment errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthPortErrorRxBadFrames 1.3.6.1.4.1.207.8.33.6.2.2.1.5
The counter is incremented when a bad frame was received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthPortErrorLateCollisions 1.3.6.1.4.1.207.8.33.6.2.2.1.6
This object counts the number of times the collison was detected in the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2EthPortErrorTxTotal 1.3.6.1.4.1.207.8.33.6.2.2.1.7
Total number of error resulted from transfer operations.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2DevicePortTable 1.3.6.1.4.1.207.8.33.7.1
Table of basic port configuration information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2DevicePortEntry

atiL2DevicePortEntry 1.3.6.1.4.1.207.8.33.7.1.1
An entry in the port config table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2DevicePortEntry  

atiL2DeviceId 1.3.6.1.4.1.207.8.33.7.1.1.1
This object identifies the Module Id of the switch Stack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2DevicePortNumber 1.3.6.1.4.1.207.8.33.7.1.1.2
This object identifies the Port on atiL2ModuleId of the switch Stack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2DevicePortName 1.3.6.1.4.1.207.8.33.7.1.1.3
This attribute associates a user defined string name with the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

atiL2DevicePortAutosenseOrHalfDuplex 1.3.6.1.4.1.207.8.33.7.1.1.4
This attribute allows an administrative request to configure whether this port can Autosense or Force the Half Duplex or Full Duplex on different Port Speeds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER portAutoSense(1), forceHalfDuplex-10M(2), forceHalfDuplex-100M(3), forceFullDuplex-10M(4), forceFullDuplex-100M(5), forceHalfDuplex-1G(6), forceFullDuplex-1G(7)  

atiL2DevicePortLinkState 1.3.6.1.4.1.207.8.33.7.1.1.5
This attribute allows an administrative request to read the status of link state on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER online(1), offline(2)  

atiL2DevicePortDuplexStatus 1.3.6.1.4.1.207.8.33.7.1.1.6
This attribute allows an administrative request to read the status of Duplex on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fullDuplex(1), halfDuplex(2), autosense(3)  

atiL2DevicePortSpeed 1.3.6.1.4.1.207.8.33.7.1.1.7
This attribute allows an administrative request to read or write the speed of this port. This Object is valid only for 10/100Mbits and gigaBits ports. The only gigabit port that can be set is that of AT-A14 and it's values can be either 2 or 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tenMBits(1), hundredMBits(2), gigaBits(3), unknown(4)  

atiL2DevicePortState 1.3.6.1.4.1.207.8.33.7.1.1.8
This attribute allows an administrative request to disable or enable communications on this port.It also responds with the status of the port .Except enabled(1) and disabled(2), all values are read-only status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), blocking(3), listening(4), learning(5)  

atiL2DevicePortTransmitPacingConfig 1.3.6.1.4.1.207.8.33.7.1.1.9
This Object is supported on at36XX product line Only. This attribute allows the transmit Pacing to be enabled or disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

atiL2DevicePortSTPConfig 1.3.6.1.4.1.207.8.33.7.1.1.10
This attribute allows a bridging Mode to be configured with either Spanning Tree enabled or disabled. When Spanning tree is enabled, make sure that this port is belonging to a valid Bridge_id. Spanning Tree is enabled only when a valid Bridge_id is set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

atiL2DevicePortBridgeid 1.3.6.1.4.1.207.8.33.7.1.1.11
The Bridge to which this port belongs to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..64  

atiL2DevicePortSTPCost 1.3.6.1.4.1.207.8.33.7.1.1.12
The Cost of the Spanning Tree Protocol.This object is valid only when STP is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

atiL2DevicePortSTPPriority 1.3.6.1.4.1.207.8.33.7.1.1.13
The Priority of the spanning Tree Protocol. This object is valid when STP is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

atiL2DevicePortFlowControlEnable 1.3.6.1.4.1.207.8.33.7.1.1.14
This per-port attribute describes whether the port identified has flow Control Enabled or not. Flow Control on Full Duplex and Half Duplex is detected and automatically, flow control accordingly is taken care of. By Default, Flow Control is Disabled.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

atiL2DevicePortBackPressureEnable 1.3.6.1.4.1.207.8.33.7.1.1.15
This per-port attribute describes whether the port identified has Back Pressure Enabled or not. By Default, Back Pressure is Disabled.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

atiL2DevicePortVlanTagPriorityConfig 1.3.6.1.4.1.207.8.33.7.1.1.16
This per-port attribute allows the configuration of the Tag Priority to be Override or Use the Tag Priority. By Default, all ports use Vlan Tag priority.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER use-vlan-priority(1), override-vlan-priority(2)  

atiL2DevicePortQOSPriorityConfig 1.3.6.1.4.1.207.8.33.7.1.1.17
This per-port attribute is applicable only to at-8324, at-8124XL-V2 and at-8316 and it allows for the configuration of the Priority of the port to be high or Low. In a switch environment, Ports with high Priority and traffic from and to the ports get more priority when compared with those with normal priority. By Default, all ports have Normal Priority.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER high-priority(1), normal-priority(2)  

atiL2BasicVlanTable 1.3.6.1.4.1.207.8.33.8.1
Table of Virtual LAN configured.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2BasicVlanEntry

atiL2BasicVlanEntry 1.3.6.1.4.1.207.8.33.8.1.1
An entry in the table, containing VLAN information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2BasicVlanEntry  

atiL2BeVlanIndex 1.3.6.1.4.1.207.8.33.8.1.1.1
This object identifies the VLAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

atiL2BeVlanName 1.3.6.1.4.1.207.8.33.8.1.1.2
This attribute associates a user defined string with the Virtual LAN. To configure a new VLAN, do 'set' operation on this object with the VLAN name. To delete a VLAN, do 'set' operation with string '*', where is the module number (1..8) from which the delete request is being sent. If a vlan is being created or modified, before configuring any of the objects in this row, set atiL2VlanStatus to 'under-construction' and once configured with all the information, set the same object to operational. This step is not required when deleting a vlan.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

atiL2BeVlanTagId 1.3.6.1.4.1.207.8.33.8.1.1.3
This object configures the VId in the Tag Information header in accordance with 802.1q spec. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4095  

atiL2BeVlanModule1UntaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.4
This Object builds the Output Ports on the Module that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12..15,18-22,26'. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanModule1TaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.5
This Object builds the Output Ports on the Module atiL2BeVlanModuleId that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12'. Please select the Module by setting the atiL2BeVlanModuleId with the Module Id and then set the port mask. If this is not set, by default this will be set to 1. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanModule2UntaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.6
This Object builds the Output Ports on the Module atiL2BeVlanModuleId that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12'. Please select the Module by setting the atiL2BeVlanModuleId with the Module Id and then set the port mask. If this is not set, by default this will be set to 1. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanModule2TaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.7
This Object builds the Output Ports on the Module atiL2BeVlanModuleId that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12'. Please select the Module by setting the atiL2BeVlanModuleId with the Module Id and then set the port mask. If this is not set, by default this will be set to 1. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanModule3UntaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.8
This Object builds the Output Ports on the Module atiL2BeVlanModuleId that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12'. Please select the Module by setting the atiL2BeVlanModuleId with the Module Id and then set the port mask. If this is not set, by default this will be set to 1. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanModule3TaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.9
This Object builds the Output Ports on the Module atiL2BeVlanModuleId that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12'. Please select the Module by setting the atiL2BeVlanModuleId with the Module Id and then set the port mask. If this is not set, by default this will be set to 1. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanModule4UntaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.10
This Object builds the Output Ports on the Module atiL2BeVlanModuleId that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12'. Please select the Module by setting the atiL2BeVlanModuleId with the Module Id and then set the port mask. If this is not set, by default this will be set to 1. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanModule4TaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.11
This Object builds the Output Ports on the Module atiL2BeVlanModuleId that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12'. Please select the Module by setting the atiL2BeVlanModuleId with the Module Id and then set the port mask. If this is not set, by default this will be set to 1. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanModule5UntaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.12
This Object builds the Output Ports on the Module atiL2BeVlanModuleId that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12'. Please select the Module by setting the atiL2BeVlanModuleId with the Module Id and then set the port mask. If this is not set, by default this will be set to 1. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanModule5TaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.13
This Object builds the Output Ports on the Module atiL2BeVlanModuleId that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12'. Please select the Module by setting the atiL2BeVlanModuleId with the Module Id and then set the port mask. If this is not set, by default this will be set to 1. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanModule6UntaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.14
This Object builds the Output Ports on the Module atiL2BeVlanModuleId that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12'. Please select the Module by setting the atiL2BeVlanModuleId with the Module Id and then set the port mask. If this is not set, by default this will be set to 1. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanModule6TaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.15
This Object builds the Output Ports on the Module atiL2BeVlanModuleId that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12'. Please select the Module by setting the atiL2BeVlanModuleId with the Module Id and then set the port mask. If this is not set, by default this will be set to 1. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanModule7UntaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.16
This Object builds the Output Ports on the Module atiL2BeVlanModuleId that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12'. Please select the Module by setting the atiL2BeVlanModuleId with the Module Id and then set the port mask. If this is not set, by default this will be set to 1. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanModule7TaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.17
This Object builds the Output Ports on the Module atiL2BeVlanModuleId that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12'. Please select the Module by setting the atiL2BeVlanModuleId with the Module Id and then set the port mask. If this is not set, by default this will be set to 1. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanModule8UntaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.18
This Object builds the Output Ports on the Module atiL2BeVlanModuleId that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12'. Please select the Module by setting the atiL2BeVlanModuleId with the Module Id and then set the port mask. If this is not set, by default this will be set to 1. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanModule8TaggedPorts 1.3.6.1.4.1.207.8.33.8.1.1.19
This Object builds the Output Ports on the Module atiL2BeVlanModuleId that participate in the Vlan with the atiL2BeVlanName. The Format of the input string would be like '1,2,5,7,12'. Please select the Module by setting the atiL2BeVlanModuleId with the Module Id and then set the port mask. If this is not set, by default this will be set to 1. Before configuring any of the objects in this row , set the atiL2VlanStatus to 'under-construction' and once configured with all the information, please set the same object to operational.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2BeVlanRowStatus 1.3.6.1.4.1.207.8.33.8.1.1.20
This object is used to create or modify a vlan. The user should first set this object to under-construction. After the vlan name, the tag Id and the ports belonging to the vlan are configured/modified, this object should be set to operational. If it is not set to operational, the whole row will be lost and the vlan will not be configured in the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), operational(2), under-construction(3), not-operational(4)  

atiL2Port2VlanTable 1.3.6.1.4.1.207.8.33.8.2
Table of per port Virtual LAN configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2Port2VlanEntry

atiL2Port2VlanEntry 1.3.6.1.4.1.207.8.33.8.2.1
An entry in the table, containing per port VLAN information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2Port2VlanEntry  

atiL2PvModuleId 1.3.6.1.4.1.207.8.33.8.2.1.1
This object identifies the Module Id on the switching Stack.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2PvPortNumber 1.3.6.1.4.1.207.8.33.8.2.1.2
This object identifies the port on the Module atiL2PvModuleId .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2PvVlanName 1.3.6.1.4.1.207.8.33.8.2.1.3
This attribute associates a user defined string with the Virtual LAN. This Object is the same as atiL2BeVlanName. Please make sure to give the same string as atiL2BeVlanName.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

atiL2IfExtensions 1.3.6.1.4.1.207.8.33.9.1
OBJECT IDENTIFIER    

atiIfExtnTable 1.3.6.1.4.1.207.8.33.9.1.1
A list of interface entries. The number of entries is given by the value of ifNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiIfExtnEntry

atiIfExtnEntry 1.3.6.1.4.1.207.8.33.9.1.1.1
An interface entry containing objects at the subnetwork layer and below for a particular interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiIfExtnEntry  

atiIfExtnIndex 1.3.6.1.4.1.207.8.33.9.1.1.1.1
A unique value for each interface corresponding to the ifIndex value for the same interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..256  

atiIfExtnModuleId 1.3.6.1.4.1.207.8.33.9.1.1.1.2
The unit number associated with this particular interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

atiIfExtnPort 1.3.6.1.4.1.207.8.33.9.1.1.1.3
The port number within a unit or slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

atiL2BrBaseTable 1.3.6.1.4.1.207.8.33.10.1.1
Table of basic bridge information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2BrBaseEntry

atiL2BrBaseEntry 1.3.6.1.4.1.207.8.33.10.1.1.1
An entry in the atiL2BrBaseTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2BrBaseEntry  

atiL2BrBaseLanId 1.3.6.1.4.1.207.8.33.10.1.1.1.1
This object uniquely identifies the lan or Virtual lan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2BrBaseBridgeAddress 1.3.6.1.4.1.207.8.33.10.1.1.1.2
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with atiL2BrStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

atiL2BrBaseNumPorts 1.3.6.1.4.1.207.8.33.10.1.1.1.3
The number of ports controlled by this bridging entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2BrBaseType 1.3.6.1.4.1.207.8.33.10.1.1.1.4
Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), transparent-only(2), sourceroute-only(3), srt(4)  

atiL2BrBasePortTable 1.3.6.1.4.1.207.8.33.10.1.4
A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2BrBasePortEntry

atiL2BrBasePortEntry 1.3.6.1.4.1.207.8.33.10.1.4.1
A list of information for each port of the bridge.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2BrBasePortEntry  

atiL2BrBasePortLanId 1.3.6.1.4.1.207.8.33.10.1.4.1.1
This object uniquely identifies the lan or Virtual lan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2BrBasePort 1.3.6.1.4.1.207.8.33.10.1.4.1.2
The port number of the port for which this entry contains bridge management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

atiL2BrBasePortIfIndex 1.3.6.1.4.1.207.8.33.10.1.4.1.3
The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2BrBasePortCircuit 1.3.6.1.4.1.207.8.33.10.1.4.1.4
For a port which (potentially) has the same value of atiL2BrBasePortIfIndex as another port on the same bridge, this object contains the name of an object instance unique to this port. For example, in the case where multiple ports correspond one- to-one with multiple X.25 virtual circuits, this value might identify an (e.g., the first) object instance associated with the X.25 virtual circuit corresponding to this port. For a port which has a unique value of atiL2BrBasePortIfIndex, this object can have the value { 0 0 }.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atiL2BrBasePortDelayExceededDiscards 1.3.6.1.4.1.207.8.33.10.1.4.1.5
The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2BrBasePortMtuExceededDiscards 1.3.6.1.4.1.207.8.33.10.1.4.1.6
The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2BrStpTable 1.3.6.1.4.1.207.8.33.10.2.1
Table of bridge spanning tree information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2BrStpEntry

atiL2BrStpEntry 1.3.6.1.4.1.207.8.33.10.2.1.1
An entry in the atiL2BrStpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2BrStpEntry  

atiL2BrStpLanId 1.3.6.1.4.1.207.8.33.10.2.1.1.1
This object uniquely identifies the lan or Virtual lan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2BrStpProtocolSpecification 1.3.6.1.4.1.207.8.33.10.2.1.1.2
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), decLb100(2), ieee8021d(3)  

atiL2BrStpPriority 1.3.6.1.4.1.207.8.33.10.2.1.1.3
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of atiL2BrBaseBridgeAddress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

atiL2BrStpTimeSinceTopologyChange 1.3.6.1.4.1.207.8.33.10.2.1.1.4
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

atiL2BrStpTopChanges 1.3.6.1.4.1.207.8.33.10.2.1.1.5
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2BrStpDesignatedRoot 1.3.6.1.4.1.207.8.33.10.2.1.1.6
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

atiL2BrStpRootCost 1.3.6.1.4.1.207.8.33.10.2.1.1.7
The cost of the path to the root as seen from this bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2BrStpRootPort 1.3.6.1.4.1.207.8.33.10.2.1.1.8
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2BrStpMaxAge 1.3.6.1.4.1.207.8.33.10.2.1.1.9
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Timeout  

atiL2BrStpHelloTime 1.3.6.1.4.1.207.8.33.10.2.1.1.10
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Timeout  

atiL2BrStpHoldTime 1.3.6.1.4.1.207.8.33.10.2.1.1.11
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2BrStpForwardDelay 1.3.6.1.4.1.207.8.33.10.2.1.1.12
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to atiL2BrStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
Status: mandatory Access: read-only
OBJECT-TYPE    
  Timeout  

atiL2BrStpBridgeMaxAge 1.3.6.1.4.1.207.8.33.10.2.1.1.13
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of atiL2BrStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Timeout 600..4000  

atiL2BrStpBridgeHelloTime 1.3.6.1.4.1.207.8.33.10.2.1.1.14
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Timeout 100..1000  

atiL2BrStpBridgeForwardDelay 1.3.6.1.4.1.207.8.33.10.2.1.1.15
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of atiL2BrStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Timeout 400..3000  

atiL2BrStpPortTable 1.3.6.1.4.1.207.8.33.10.2.15
A table that contains port-specific information for the Spanning Tree Protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2BrStpPortEntry

atiL2BrStpPortEntry 1.3.6.1.4.1.207.8.33.10.2.15.1
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2BrStpPortEntry  

atiL2BrStpPortLanId 1.3.6.1.4.1.207.8.33.10.2.15.1.1
This object uniquely identifies the lan or Virtual lan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2BrStpPort 1.3.6.1.4.1.207.8.33.10.2.15.1.2
The port number of the port for which this entry contains Spanning Tree Protocol management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

atiL2BrStpPortPriority 1.3.6.1.4.1.207.8.33.10.2.15.1.3
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of atiL2BrStpPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

atiL2BrStpPortState 1.3.6.1.4.1.207.8.33.10.2.15.1.4
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see atiL2BrStpPortEnable), this object will have a value of disabled(1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

atiL2BrStpPortEnable 1.3.6.1.4.1.207.8.33.10.2.15.1.5
The enabled/disabled status of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

atiL2BrStpPortPathCost 1.3.6.1.4.1.207.8.33.10.2.15.1.6
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

atiL2BrStpPortDesignatedRoot 1.3.6.1.4.1.207.8.33.10.2.15.1.7
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

atiL2BrStpPortDesignatedCost 1.3.6.1.4.1.207.8.33.10.2.15.1.8
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2BrStpPortDesignatedBridge 1.3.6.1.4.1.207.8.33.10.2.15.1.9
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

atiL2BrStpPortDesignatedPort 1.3.6.1.4.1.207.8.33.10.2.15.1.10
The Port Identifier of the port on the Designated Bridge for this port's segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

atiL2BrStpPortForwardTransitions 1.3.6.1.4.1.207.8.33.10.2.15.1.11
The number of times this port has transitioned from the Learning state to the Forwarding state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2BrTpTable 1.3.6.1.4.1.207.8.33.10.3.1
Table of transparent bridging information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2BrTpEntry

atiL2BrTpEntry 1.3.6.1.4.1.207.8.33.10.3.1.1
An entry in the atiL2BrTpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2BrTpEntry  

atiL2BrTpLanId 1.3.6.1.4.1.207.8.33.10.3.1.1.1
This object uniquely identifies the lan or Virtual lan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2BrTpLearnedEntryDiscards 1.3.6.1.4.1.207.8.33.10.3.1.1.2
The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2BrTpAgingTime 1.3.6.1.4.1.207.8.33.10.3.1.1.3
The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..1000000  

atiL2BrTpFdbTable 1.3.6.1.4.1.207.8.33.10.3.3
A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2BrTpFdbEntry

atiL2BrTpFdbEntry 1.3.6.1.4.1.207.8.33.10.3.3.1
Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2BrTpFdbEntry  

atiL2BrTpFdbLanId 1.3.6.1.4.1.207.8.33.10.3.3.1.1
This object uniquely identifies the lan or Virtual lan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2BrTpFdbAddress 1.3.6.1.4.1.207.8.33.10.3.3.1.2
A unicast MAC address for which the bridge has forwarding and/or filtering information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

atiL2BrTpFdbPort 1.3.6.1.4.1.207.8.33.10.3.3.1.3
Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of atiL2BrTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address . Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of atiL2BrTpFdbStatus is not learned(3).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2BrTpFdbStatus 1.3.6.1.4.1.207.8.33.10.3.3.1.4
The status of this entry. The meanings of the values are: inactive(1) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. active(2) : the value of the corresponding instance of atiL2BrTpFdbPort was active, and is being used. other(3) : none of the following. This would include the case where some other MIB object (not the corresponding instance of atiL2BrTpFdbPort ) is being used to determine if and how frames addressed to the value of the corresponding instance of atiL2BrTpFdbAddress are being forwarded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2), other(3)  

atiL2BrTpPortTable 1.3.6.1.4.1.207.8.33.10.3.4
A table that contains information about every port that is associated with this transparent bridge.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2BrTpPortEntry

atiL2BrTpPortEntry 1.3.6.1.4.1.207.8.33.10.3.4.1
A list of information for each port of a transparent bridge.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2BrTpPortEntry  

atiL2BrTpPortLanId 1.3.6.1.4.1.207.8.33.10.3.4.1.1
This object uniquely identifies the lan or Virtual lan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2BrTpPort 1.3.6.1.4.1.207.8.33.10.3.4.1.2
The port number of the port for which this entry contains Transparent bridging management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

atiL2BrTpPortMaxInfo 1.3.6.1.4.1.207.8.33.10.3.4.1.3
The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

atiL2BrTpPortInFrames 1.3.6.1.4.1.207.8.33.10.3.4.1.4
The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2BrTpPortOutFrames 1.3.6.1.4.1.207.8.33.10.3.4.1.5
The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2BrTpPortInDiscards 1.3.6.1.4.1.207.8.33.10.3.4.1.6
Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

atiL2TrapAttrModuleId 1.3.6.1.4.1.207.8.33.11.1
This attribute is the Module Numver used when Traps pertinent to Module is sent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..8  

atiL2TrapAttrPortId 1.3.6.1.4.1.207.8.33.11.2
This attribute is the Port Number used when Traps pertinent to Ports are sent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

newRoot 101
The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer immediately subsequent to its election. Implementation of this trap is optional.
TRAP-TYPE    

topologyChange 102
A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.
TRAP-TYPE    

atiL2FanStopTrap 103
A Trap sent from the Module defined by the varable above when a fan from that Module stops.
TRAP-TYPE    

atiL2TemperatureAbnormalTrap 104
A Trap sent from the Module defined by the varable above when temperature of the Module is abnormal.
TRAP-TYPE    

atiL2PowerSupplyOutage 105
A Trap sent from the Module defined by the varable above when one of the power supply goes down.
TRAP-TYPE    

atiL2IntruderAlert 106
A Trap sent from the specified module and specified port when an intruder has been detected.
TRAP-TYPE    

atiL2QOSStatus 1.3.6.1.4.1.207.8.33.12.1
If the QOS status is enabled, then QOS packets will be assigned to high or low priority queue. If it is disabled, packets works normally.(Applicable only to at-8326GB, at-9410GB and at-8350GB)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

atiL2TrafficMappingTable 1.3.6.1.4.1.207.8.33.12.2
It contains the mapping of all traffic classes and their priority assignments.(Applicable only to at-8326GB, at-9410GB and at-8350GB)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtiL2TrafficMappingEntry

atiL2TrafficMappingEntry 1.3.6.1.4.1.207.8.33.12.2.1
Each entry maps a traffic class to the priority queue to be used for it's packets. (Applicable only to at-8326GB, at-9410GB and at-8350GB)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtiL2TrafficMappingEntry  

atiL2TrafficClassIndex 1.3.6.1.4.1.207.8.33.12.2.1.1
The Index of the traffic class. It is obtained from the packet format.(Applicable only to at-8326GB, at-9410GB and at-8350GB)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

atiL2PriorityQueue 1.3.6.1.4.1.207.8.33.12.2.1.2
The priority queue to be used to forward packets. (Applicable only to at-8326GB, at-9410GB and at-8350GB)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER highest(0), lowest(1)