BAS-IP-FORWARD-MIB

File: BAS-IP-FORWARD-MIB.mib (15542 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC BAS-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE IpAddress
Integer32 Gauge32 RowStatus
basAliasCidr BasChassisId BasSlotId
BasInterfaceId BasLogicalPortId

Defined Types

BasCidrEntry  
SEQUENCE    
  basIpCidrRouteNumber Gauge32
  basCidrChassis BasChassisId
  basCidrSlot BasSlotId
  basCidrIf BasInterfaceId
  basCidrLPort BasLogicalPortId

BasIpCidrRouteEntry  
SEQUENCE    
  basIpCidrRouteDest IpAddress
  basIpCidrRouteMask IpAddress
  basIpCidrRouteTos Integer32
  basIpCidrRouteNextHop IpAddress
  basIpCidrRouteIfIndex Integer32
  basIpCidrRouteType INTEGER
  basIpCidrRouteProto INTEGER
  basIpCidrRouteAge Integer32
  basIpCidrRouteInfo OBJECT IDENTIFIER
  basIpCidrRouteNextHopAS Integer32
  basIpCidrRouteMetric1 Integer32
  basIpCidrRouteMetric2 Integer32
  basIpCidrRouteMetric3 Integer32
  basIpCidrRouteMetric4 Integer32
  basIpCidrRouteMetric5 Integer32
  basIpCidrRouteStatus RowStatus
  basIpCidrRouteChassis BasChassisId
  basIpCidrRouteSlot BasSlotId
  basIpCidrRouteIf BasInterfaceId
  basIpCidrRouteLPort BasLogicalPortId

Defined Values

basIpForward 1.3.6.1.4.1.3493.2.7.5.1
This module defines the MIB objects for a Broadband Access System IP Forwarding component.
MODULE-IDENTITY    

basCidrObjects 1.3.6.1.4.1.3493.2.7.5.2
OBJECT IDENTIFIER    

basCidrTable 1.3.6.1.4.1.3493.2.7.5.2.1
A list of Route Server forwarding table distribution mechanism statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasCidrEntry

basCidrEntry 1.3.6.1.4.1.3493.2.7.5.2.1.1
Objects for the CIDR mib.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasCidrEntry  

basIpCidrRouteNumber 1.3.6.1.4.1.3493.2.7.5.2.1.1.3
The number of current ipCidrRouteTable entries that are not invalid.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

basCidrChassis 1.3.6.1.4.1.3493.2.7.5.2.1.1.4
The BAS Chassis ID of the Route Server.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasChassisId  

basCidrSlot 1.3.6.1.4.1.3493.2.7.5.2.1.1.5
The BAS Slot ID of the Route Server.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasSlotId  

basCidrIf 1.3.6.1.4.1.3493.2.7.5.2.1.1.6
The BAS interface ID of the Route Server.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasInterfaceId  

basCidrLPort 1.3.6.1.4.1.3493.2.7.5.2.1.1.7
The BAS logical port ID of the Route Server.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasLogicalPortId  

basIpCidrRouteTable 1.3.6.1.4.1.3493.2.7.5.2.4
This entity's IP Routing table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasIpCidrRouteEntry

basIpCidrRouteEntry 1.3.6.1.4.1.3493.2.7.5.2.4.1
A particular route to a particular destina- tion, under a particular policy.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasIpCidrRouteEntry  

basIpCidrRouteDest 1.3.6.1.4.1.3493.2.7.5.2.4.1.1
The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteMask object is not equal to x.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

basIpCidrRouteMask 1.3.6.1.4.1.3493.2.7.5.2.4.1.2
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipCidrRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipCidrRouteMask by reference to the IP Ad- dress Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteDest object is not equal to ipCidrRoute- Dest.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

basIpCidrRouteTos 1.3.6.1.4.1.3493.2.7.5.2.4.1.3
The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

basIpCidrRouteNextHop 1.3.6.1.4.1.3493.2.7.5.2.4.1.4
On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

basIpCidrRouteIfIndex 1.3.6.1.4.1.3493.2.7.5.2.4.1.5
The ifIndex value which identifies the local interface through which the next hop of this route should be reached.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

basIpCidrRouteType 1.3.6.1.4.1.3493.2.7.5.2.4.1.6
The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes which do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally. reject (2) refers to a route which, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), reject(2), local(3), remote(4)  

basIpCidrRouteProto 1.3.6.1.4.1.3493.2.7.5.2.4.1.7
The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), isIs(9), esIs(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14), idpr(15), ciscoEigrp(16)  

basIpCidrRouteAge 1.3.6.1.4.1.3493.2.7.5.2.4.1.8
The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

basIpCidrRouteInfo 1.3.6.1.4.1.3493.2.7.5.2.4.1.9
A reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the route's ipCidrRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identif- ier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value.
Status: current Access: read-create
OBJECT-TYPE    
  OBJECT IDENTIFIER  

basIpCidrRouteNextHopAS 1.3.6.1.4.1.3493.2.7.5.2.4.1.10
The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant its value should be set to zero.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

basIpCidrRouteMetric1 1.3.6.1.4.1.3493.2.7.5.2.4.1.11
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

basIpCidrRouteMetric2 1.3.6.1.4.1.3493.2.7.5.2.4.1.12
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

basIpCidrRouteMetric3 1.3.6.1.4.1.3493.2.7.5.2.4.1.13
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

basIpCidrRouteMetric4 1.3.6.1.4.1.3493.2.7.5.2.4.1.14
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

basIpCidrRouteMetric5 1.3.6.1.4.1.3493.2.7.5.2.4.1.15
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

basIpCidrRouteStatus 1.3.6.1.4.1.3493.2.7.5.2.4.1.16
The row status variable, used according to row installation and removal conventions.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

basIpCidrRouteChassis 1.3.6.1.4.1.3493.2.7.5.2.4.1.17
The BAS Chassis ID of the Route Server.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasChassisId  

basIpCidrRouteSlot 1.3.6.1.4.1.3493.2.7.5.2.4.1.18
The BAS Slot ID of the Route Server.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasSlotId  

basIpCidrRouteIf 1.3.6.1.4.1.3493.2.7.5.2.4.1.19
The BAS interface ID of the Route Server.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasInterfaceId  

basIpCidrRouteLPort 1.3.6.1.4.1.3493.2.7.5.2.4.1.20
The BAS logical port ID of the Route Server.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasLogicalPortId