BASEBRDD-MIB-MIB

File: BASEBRDD-MIB-MIB.mib (220798 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI HOST-RESOURCES-MIB
RFC-1215 RFC-1212 RFC1213-MIB
DMTF-DMI-MIB

Imported symbols

enterprises Gauge Counter
Counter64 InternationalDisplayString TRAP-TYPE
OBJECT-TYPE DisplayString Dmi-Date
Dmi-Integer64 dmiEventDateTime dmiCompId
dmiEventSeverity dmiEventStateKey dmiEventAssociatedGroup
dmiEventSystem dmiEventSubSystem

Defined Types

DmiCounter  
Counter    

DmiCounter64  
Counter64    

DmiGauge  
Gauge    

DmiInteger  
INTEGER    

DmiOctetstring  
OCTET STRING    

DmiDisplaystring  
DisplayString    

DmiCompId  
INTEGER    

DmiGroupId  
INTEGER    

SdMTFComponentID  
SEQUENCE    
  manufacturerAtt1 DmiDisplaystring
  productAtt2 DmiDisplaystring
  versionAtt3 DmiDisplaystring
  serialNumberAtt4 DmiDisplaystring
  installationAtt5 Dmi-Date
  verifyAtt6 DmiInteger

SdellTemperatureProbe  
SEQUENCE    
  dellTemperatureProbeState INTEGER
  tempParentIndexAtt1 DmiInteger
  tempIndexAtt2 DmiInteger
  tempTypeAtt3 DmiInteger
  tempStatusAtt4 DmiInteger
  tempReadingAtt5 DmiInteger
  tempMinWarnAtt6 DmiDisplaystring
  tempMaxWarnAtt7 DmiDisplaystring
  tempMinFailAtt8 DmiInteger
  tempMaxFailAtt9 DmiInteger
  tempLocationAtt10 DmiDisplaystring

SdellFanSensor  
SEQUENCE    
  dellFanSensorState INTEGER
  fansParentIndexAtt1 DmiInteger
  fansIndexAtt2 DmiInteger
  fansTypeAtt3 DmiInteger
  fansStatusAtt4 DmiInteger
  fansReadingAtt5 DmiInteger
  fansWarningMinAtt6 DmiDisplaystring
  fansMaxWarnAtt7 DmiDisplaystring
  fansMinFailAtt8 DmiInteger
  fansMaxFailAtt9 DmiInteger
  fansLocationAtt10 DmiDisplaystring

SdellVoltageProbe  
SEQUENCE    
  dellVoltageProbeState INTEGER
  voltParentIndexAtt1 DmiInteger
  voltIndexAtt2 DmiInteger
  voltTypeAtt3 DmiInteger
  voltStatusAtt4 DmiInteger
  voltReadingAtt5 DmiInteger
  voltMinWarnAtt6 DmiDisplaystring
  voltMaxWarnAtt7 DmiDisplaystring
  voltMinFailAtt8 DmiInteger
  voltMaxFailAtt9 DmiInteger
  voltLocationAtt10 DmiDisplaystring

SdellCurrentProbe  
SEQUENCE    
  dellCurrentProbeState INTEGER
  ampParentIndexAtt1 DmiInteger
  ampIndexAtt2 DmiInteger
  ampTypeAtt3 DmiInteger
  ampStatusAtt4 DmiInteger
  ampReadingAtt5 DmiInteger
  ampMinWarnAtt6 DmiDisplaystring
  ampMaxWarnAtt7 DmiDisplaystring
  ampMinFailAtt8 DmiInteger
  ampMaxFailAtt9 DmiInteger
  ampLocationAtt10 DmiDisplaystring

SdellRedundantPowerSupply  
SEQUENCE    
  dellRedundantPowerSupplyState INTEGER
  pwrSupplyParentIndexAtt1 DmiInteger
  pwrSupplyIndexAtt2 DmiInteger
  pwrSupplyTypeAtt3 DmiInteger
  pwrSupplyStatusAtt4 DmiInteger
  pwrSupplyOnlineAtt5 DmiDisplaystring
  pwrLocationAtt6 DmiDisplaystring

SdellGlobalPowerUnit  
SEQUENCE    
  dellGlobalPowerUnitState INTEGER
  pwrUnitStatusAtt1 DmiInteger
  pwrUnitGlobalLevelAtt2 DmiInteger
  pwrUnitGlobalMaxWarnAtt3 DmiDisplaystring
  pwrUnitLevel33vAtt4 DmiInteger
  pwrUnitMaxWarn33vAtt5 DmiDisplaystring
  pwrUnitLevel5vAtt6 DmiInteger
  pwrUnitMaxWarn5vAtt7 DmiDisplaystring
  pwrUnitLevel12vAtt8 DmiInteger
  pwrUnitMaxWarn12vAtt9 DmiDisplaystring
  pwrUnitUidAtt10 DmiDisplaystring
  pwrUnitIndexAtt11 DmiInteger

SdellSystemChassisExtension  
SEQUENCE    
  dellSystemChassisExtensionState INTEGER
  chassIndexAtt1 DmiInteger
  chassGlobStatusAtt2 DmiInteger
  chassTempStatusAtt3 DmiInteger
  chassTempProbesAtt4 DmiOctetstring
  chassFansStatusAtt5 DmiInteger
  chassFansProbesAtt6 DmiOctetstring
  chassVoltStatusAtt7 DmiInteger
  chassVoltProbesAtt8 DmiOctetstring
  chassAmpStatusAtt9 DmiInteger
  chassAmpProbesAtt10 DmiOctetstring
  chassPsStatusAtt11 DmiInteger
  chassPwrSuppliesAtt12 DmiOctetstring
  chassServiceTagAtt13 DmiDisplaystring
  chassUidAtt14 DmiDisplaystring
  chassBackPlaneUidAtt15 DmiDisplaystring
  chassIdentifyAtt16 DmiDisplaystring
  chassFanControlAtt17 DmiDisplaystring
  chassLEDConfigAtt18 DmiDisplaystring
  chassFaultClearAtt19 DmiDisplaystring
  chassThermalShutdownAtt20 DmiDisplaystring
  chassMemStatusAtt21 DmiInteger
  chassMemDevicesAtt22 DmiOctetstring

SdMTFPhysicalContainerGlobalTable  
SEQUENCE    
  dMTFPhysicalContainerGlobalTableState INTEGER
  containerOrChassisTypeAtt1 DmiInteger
  assetTagAtt2 DmiDisplaystring
  chassisLockPresentAtt3 DmiInteger
  bootupStateAtt4 DmiInteger
  powerStateAtt5 DmiInteger
  thermalStateAtt6 DmiInteger
  fRUGroupIndexAtt7 DmiInteger
  operationalGroupIndexAtt8 DmiInteger
  containerIndexAtt9 DmiInteger
  containerNameAtt10 DmiDisplaystring
  containerLocationAtt11 DmiDisplaystring
  containerSecurityStatusAtt12 DmiInteger

SdellSystemReset  
SEQUENCE    
  automaticCapabilitiesAtt1 DmiInteger
  automaticSettingsAtt2 DmiDisplaystring
  notificationNumberAtt3 DmiDisplaystring
  manualCapabilitiesAtt4 DmiInteger
  manualControlAtt5 DmiDisplaystring
  automaticSystemResetTimerAtt6 DmiDisplaystring

SdellEsmLog  
SEQUENCE    
  dellEsmLogState INTEGER
  esmLogIndexAtt1 DmiInteger
  esmLogDataAtt2 DmiDisplaystring

SdellPOSTLog  
SEQUENCE    
  dellPOSTLogState INTEGER
  postLogIndexAtt1 DmiInteger
  postLogDataAtt2 DmiOctetstring

SdellSecurity  
SEQUENCE    
  dellSecurityState INTEGER
  userIndexAtt1 DmiInteger
  userNameAtt2 DmiDisplaystring
  userControlAtt3 DmiDisplaystring
  requestAtt4 DmiDisplaystring

SdellDialup  
SEQUENCE    
  dialupCapabilityAtt1 DmiInteger
  callbackNumberAtt2 DmiDisplaystring

SdellFirmware  
SEQUENCE    
  dellFirmwareState INTEGER
  firmwareChassisIndexAtt1 DmiInteger
  firmwareIndexAtt2 DmiInteger
  firmwareTypeAtt3 DmiInteger
  firmwareVersionAtt4 DmiDisplaystring
  firmwareStatusAtt5 DmiInteger

SdMTFCoolingDevice  
SEQUENCE    
  dMTFCoolingDeviceState INTEGER
  coolingDeviceTableIndexAtt1 DmiInteger
  fRUGroupIndexAtt2 DmiInteger
  operationalGroupIndexAtt3 DmiInteger
  coolingUnitIndexAtt4 DmiInteger
  coolingDeviceTypeAtt5 DmiInteger
  temperatureProbeIndexAtt6 DmiInteger

SdMTFElectricalCurrentProbe  
SEQUENCE    
  dMTFElectricalCurrentProbeState INTEGER
  electricalCurrentProbeTableIndexAtt1 DmiInteger
  electricalCurrentProbeLocationAtt2 DmiInteger
  electricalCurrentProbeDescriptionAtt3 DmiDisplaystring
  electricalCurrentStatusAtt4 DmiInteger
  electricalCurrentProbeReadingAtt5 DmiInteger
  monitoredElectricalCurrentNominalReadingAtt6 DmiInteger
  monitoredElectricalCurrentNormalMaximumAtt7 DmiInteger
  monitoredElectricalCurrentNormalMinimumAtt8 DmiInteger
  electricalCurrentProbeMaximumAtt9 DmiInteger
  electricalCurrentProbeMinimumAtt10 DmiInteger
  electricalCurrentReadingLowerThresholdNonCriticalAtt11 DmiInteger
  electricalCurrentReadingUpperThresholdNonCriticalAtt12 DmiInteger
  electricalCurrentReadingLowerThresholdCriticalAtt13 DmiInteger
  currentReadingUpperThresholdCriticalAtt14 DmiInteger
  electricalCurrentReadingLowerThresholdNonRecoverabAtt15 DmiInteger
  electricalCurrentReadingUpperThresholdNonRecoverabAtt16 DmiInteger
  electricalCurrentProbeResolutionAtt17 DmiInteger
  electricalCurrentProbeToleranceAtt18 DmiInteger
  electricalCurrentProbeAccuracyAtt19 DmiInteger
  fRUGroupIndex-1Att20 DmiInteger
  operationalGroupIndex-1Att21 DmiInteger

SdMTFFRU  
SEQUENCE    
  dMTFFRUState INTEGER
  fRUIndexAtt1 DmiInteger
  deviceGroupIndexAtt2 DmiInteger
  descriptionAtt3 DmiDisplaystring
  manufacturerAtt4 DmiDisplaystring
  modelAtt5 DmiDisplaystring
  partNumberAtt6 DmiDisplaystring
  fRUSerialNumberAtt7 DmiDisplaystring
  revisionLevelAtt8 DmiDisplaystring
  warrantyStartDateAtt9 Dmi-Date
  warrantyDurationAtt10 DmiInteger
  supportPhoneNumberAtt11 DmiDisplaystring
  fRUInternetUniformResourceLocatorAtt12 DmiDisplaystring

SdMTFGeneralInformation  
SEQUENCE    
  systemNameAtt1 DmiDisplaystring
  systemLocationAtt2 DmiDisplaystring
  systemPrimaryUserNameAtt3 DmiDisplaystring
  systemPrimaryUserPhoneAtt4 DmiDisplaystring
  systemBootupTimeAtt5 Dmi-Date
  systemDateTimeAtt6 Dmi-Date

SdMTFMemoryArrayMappedAddresses  
SEQUENCE    
  dMTFMemoryArrayMappedAddressesState INTEGER
  memoryArrayMappedAddressesTableIndexAtt1 DmiInteger
  memoryArrayIndexAtt2 DmiInteger
  mappedRangeStartingAddressAtt3 DmiInteger
  mappedRangeEndingAddressAtt4 DmiInteger
  partitionIDAtt5 DmiInteger
  partitionWidthAtt6 DmiInteger
  operationalGroupIndexAtt7 DmiInteger

SdMTFMemoryDeviceMappedAddresses  
SEQUENCE    
  dMTFMemoryDeviceMappedAddressesState INTEGER
  memoryDeviceMappedAddressesTableIndexAtt1 DmiInteger
  memoryDeviceSetIDAtt2 DmiInteger
  partitionAtt3 DmiInteger
  mappedRangeStartingAddressAtt4 DmiInteger
  mappedRangeEndingAddressAtt5 DmiInteger
  partitionRowPositionAtt6 DmiInteger
  interleavePositionAtt7 DmiInteger
  dataDepthAtt8 DmiInteger

SdMTFMemoryDevice  
SEQUENCE    
  dMTFMemoryDeviceState INTEGER
  memoryDeviceTableIndexAtt1 DmiInteger
  memoryArrayIndexAtt2-1 DmiInteger
  deviceLocatorAtt3 DmiDisplaystring
  bankLocatorAtt4 DmiDisplaystring
  sizeAtt5 DmiInteger
  formFactorAtt6 DmiInteger
  totalWidthAtt7 DmiInteger
  dataWidthAtt8 DmiInteger
  memoryTypeAtt9 DmiInteger
  typeDetailAtt10 DmiInteger
  deviceSetAtt11 DmiInteger
  deviceErrorTypeAtt12 DmiInteger
  errorGranularityAtt13 DmiInteger
  lastErrorUpdateAtt14 DmiInteger
  errorOperationAtt15 DmiInteger
  errorDataSizeAtt16 DmiInteger
  errorDataAtt17 DmiOctetstring
  vendorSyndromeAtt18 DmiOctetstring
  deviceErrorAddressAtt19 DmiInteger
  arrayErrorAddressAtt20 DmiInteger
  errorResolutionAtt21 DmiInteger
  fRUGroupIndexAtt22 DmiInteger
  operationalGroupIndexAtt23 DmiInteger

SdMTFOperatingSystem  
SEQUENCE    
  dMTFOperatingSystemState INTEGER
  operatingSystemIndexAtt1 DmiInteger
  operatingSystemNameAtt2 DmiDisplaystring
  operatingSystemVersionAtt3 DmiDisplaystring
  primaryOperatingSystemAtt4 DmiInteger
  operatingSystemBootDeviceStorageTypeAtt5 DmiInteger
  operatingSystemBootDeviceIndexAtt6 DmiInteger
  operatingSystemBootPartitionIndexAtt7 DmiInteger
  operatingSystemDescriptionAtt8 DmiDisplaystring

SdMTFOperationalState  
SEQUENCE    
  dMTFOperationalStateState INTEGER
  operationalStateInstanceIndexAtt1 DmiInteger
  deviceGroupIndexAtt2-1 DmiInteger
  operationalStatusAtt3 DmiInteger
  usageStateAtt4 DmiInteger
  availabilityStatusAtt5 DmiInteger
  administrativeStateAtt6 DmiInteger
  fatalErrorCountAtt7 DmiCounter
  majorErrorCountAtt8 DmiCounter
  warningErrorCountAtt9 DmiCounter
  currentErrorStatusAtt10 DmiInteger
  devicePredictedFailureStatusAtt11 DmiInteger

SiNTELMIFTOMIB  
SEQUENCE    
  dellBaseBoardMIBAtt1 DmiDisplaystring
  mIBOIDAtt2 DmiDisplaystring
  disableTrapsAtt3 DmiInteger

SdMTFPowerSupply  
SEQUENCE    
  dMTFPowerSupplyState INTEGER
  powerSupplyIndexAtt1 DmiInteger
  fRUGroupIndexAtt2-1 DmiInteger
  operationalGroupIndexAtt3-1 DmiInteger
  powerUnitIndexAtt4 DmiInteger
  powerSupplyTypeAtt5 DmiInteger
  inputVoltageCapabilityDescriptionAtt6 DmiDisplaystring
  range1InputVoltageLowAtt7 DmiInteger
  range1InputVoltageHighAtt8 DmiInteger
  range1VoltageProbeIndexAtt9 DmiInteger
  range1ElectricalCurrentProbeIndexAtt10 DmiInteger
  range2InputVoltageLowAtt11 DmiInteger
  range2InputVoltageHighAtt12 DmiInteger
  range2VoltageProbeIndexAtt13 DmiInteger
  range2CurrentProbeIndexAtt14 DmiInteger
  activeInputVoltageRangeAtt15 DmiInteger
  inputVoltageRangeSwitchingAtt16 DmiInteger
  range1InputFrequencyLowAtt17 DmiInteger
  range1InputFrequencyHighAtt18 DmiInteger
  range2InputFrequencyLowAtt19 DmiInteger
  range2InputFrequencyHighAtt20 DmiInteger
  totalOutputPowerAtt21 DmiInteger

SdMTFPowerUnitGlobalTable  
SEQUENCE    
  dMTFPowerUnitGlobalTableState INTEGER
  powerUnitIndexAtt1 DmiInteger
  powerUnitRedundancyStatusAtt2 DmiInteger

SdMTFProcessor  
SEQUENCE    
  dMTFProcessorState INTEGER
  processorIndexAtt1 DmiInteger
  processorTypeAtt2 DmiInteger
  processorFamilyAtt3 DmiInteger
  processorVersionInformationAtt4 DmiDisplaystring
  maximumSpeedAtt5 DmiInteger
  currentSpeedAtt6 DmiInteger
  processorUpgradeAtt7 DmiInteger
  fRUGroupIndexAtt8 DmiInteger
  operationalGroupIndexAtt9 DmiInteger
  level1CacheIndexAtt10 DmiInteger
  level2CacheIndexAtt11 DmiInteger
  level3CacheIndexAtt12 DmiInteger

SdMTFSerialPorts  
SEQUENCE    
  dMTFSerialPortsState INTEGER
  serialPortIndexAtt1 DmiInteger
  serialBaseIOAddressAtt2 Dmi-Integer64
  iRQUsedAtt3 DmiInteger
  logicalNameAtt4 DmiDisplaystring
  connectorTypeAtt5 DmiInteger
  maximumSpeedAtt6 DmiInteger
  serialPortCapabilitiesAtt7 DmiInteger
  operationalGroupIndexAtt8-1 DmiInteger
  serialPortSecuritySettingsAtt9 DmiInteger

SdMTFSystemBIOS  
SEQUENCE    
  dMTFSystemBIOSState INTEGER
  bIOSIndexAtt1 DmiInteger
  bIOSManufacturerAtt2 DmiDisplaystring
  bIOSVersionAtt3 DmiDisplaystring
  bIOSROMSizeAtt4 DmiInteger
  bIOSStartingAddressAtt5 Dmi-Integer64
  bIOSEndingAddressAtt6 Dmi-Integer64
  bIOSLoaderVersionAtt7 DmiDisplaystring
  bIOSReleaseDateAtt8 Dmi-Date
  primaryBIOSAtt9 DmiInteger

SdMTFSystemCache  
SEQUENCE    
  dMTFSystemCacheState INTEGER
  systemCacheIndexAtt1 DmiInteger
  systemCacheLevelAtt2 DmiInteger
  systemCacheSpeedAtt3 DmiInteger
  systemCacheSizeAtt4 DmiInteger
  systemCacheWritePolicyAtt5 DmiInteger
  systemCacheErrorCorrectionAtt6 DmiInteger
  fRUGroupIndexAtt7-1 DmiInteger
  operationalGroupIndexAtt8-2 DmiInteger
  systemCacheTypeAtt9 DmiInteger
  lineSizeAtt10 DmiInteger
  volatilityAtt11 DmiInteger
  replacementPolicyAtt12 DmiInteger
  readPolicyAtt13 DmiInteger
  flushTimerAtt14 DmiInteger
  associativityAtt15 DmiInteger

SdMTFSystemHardwareSecurity  
SEQUENCE    
  powerOnPasswordStatusAtt1 DmiInteger
  keyboardPasswordStatusAtt2 DmiInteger
  administratorPasswordStatisAtt3 DmiInteger
  frontPanelResetStatusAtt4 DmiInteger

SdMTFSystemPowerControls  
SEQUENCE    
  powerControlRequestAtt1 DmiInteger
  timedPowerOnAvailableAtt2 DmiInteger
  timeToNextScheduledPowerOnAtt3 DmiInteger

SdMTFSystemResourceDMAInfo  
SEQUENCE    
  dMTFSystemResourceDMAInfoState INTEGER
  systemResourceDMAInfoIndexAtt1 DmiInteger
  dMATransferWidthAtt2 DmiInteger
  dMAAddressSizeAtt3 DmiInteger
  dMAMaximumTransferSizeAtt4 DmiInteger
  dMATransferPreferenceAtt5 DmiInteger
  busMasterAtt6 DmiInteger
  byteModeAtt7 DmiInteger
  wordModeAtt8 DmiInteger
  channelTimingAtt9 DmiInteger
  typeCTimingAtt10 DmiInteger

SdMTFSystemResourceDeviceInfo  
SEQUENCE    
  dMTFSystemResourceDeviceInfoState INTEGER
  resourceUserAtt1 DmiInteger
  deviceIDAtt2 DmiInteger
  deviceSerialNumberAtt3 DmiInteger
  logicalDeviceIDClassCodeAtt4 DmiInteger
  deviceFlagsAtt5 DmiInteger
  deviceNumberAtt6 DmiInteger
  functionNumberAtt7 DmiInteger
  busTypeAtt8 DmiInteger
  cMReservedAtt9 DmiInteger

SdMTFSystemResourceIOInfo  
SEQUENCE    
  dMTFSystemResourceIOInfoState INTEGER
  systemResourceIOInfoIndexAtt1 DmiInteger
  iODecodeAtt2 DmiInteger

SdMTFSystemResourceIRQInfo  
SEQUENCE    
  dMTFSystemResourceIRQInfoState INTEGER
  systemResourceIRQInfoIndexAtt1 DmiInteger
  triggerTypeAtt2 DmiInteger
  triggerLevelAtt3 DmiInteger

SdMTFSystemResourceMemoryInfo  
SEQUENCE    
  dMTFSystemResourceMemoryInfoState INTEGER
  systemResourceMemoryInfoIndexAtt1 DmiInteger
  iSAPCMCIARangeDescriptorAtt2 DmiInteger
  eISARangeDescriptorAtt3 DmiInteger
  decodeSupportAtt4 DmiInteger
  cacheableAtt5 DmiInteger
  cacheTypeAtt6 DmiInteger
  readWriteAtt7 DmiInteger

SdMTFSystemResources2  
SEQUENCE    
  dMTFSystemResources2State INTEGER
  systemResourcesIndexAtt1 DmiInteger
  resourceUserAtt2 DmiInteger
  resourceSetAtt3 DmiInteger
  resourceAssignmentAtt4 DmiInteger
  resourceTypeAtt5 DmiInteger
  resourceNumberAtt6 DmiInteger
  resourceInfoIDAtt7 DmiInteger
  startAddressAtt8 Dmi-Integer64
  endAddressAtt9 Dmi-Integer64
  resourceSizeAtt10 DmiInteger
  baseAlignmentAtt11 DmiInteger
  shareableAtt12 DmiInteger
  sharedAtt13 DmiInteger

SdMTFSystemSlots  
SEQUENCE    
  dMTFSystemSlotsState INTEGER
  slotIndexAtt1 DmiInteger
  slotTypeAtt2 Dmi-Integer64
  slotWidthAtt3 DmiInteger
  currentUsageAtt4 DmiInteger
  slotDescriptionAtt5 DmiDisplaystring
  slotCategoryAtt6 DmiInteger
  virtualSlotAtt7 DmiInteger
  resourceUserIDAtt8 DmiInteger

SdMTFTemperatureProbe  
SEQUENCE    
  dMTFTemperatureProbeState INTEGER
  temperatureProbeTableIndexAtt1 DmiInteger
  temperatureProbeLocationAtt2 DmiInteger
  temperatureProbeDescriptionAtt3 DmiDisplaystring
  temperatureStatusAtt4 DmiInteger
  temperatureProbeTemperatureReadingAtt5 DmiInteger
  monitoredTemperatureNominalReadingAtt6 DmiInteger
  monitoredTemperatureNormalMaximumAtt7 DmiInteger
  monitoredTemperatureNormalMinimumAtt8 DmiInteger
  temperatureProbeMaximumAtt9 DmiInteger
  temperatureProbeMinimumAtt10 DmiInteger
  temperatureReadingLowerThresholdNonCriticalAtt11 DmiInteger
  temperatureReadingUpperThresholdNonCriticalAtt12 DmiInteger
  temperatureReadingLowerThresholdCriticalAtt13 DmiInteger
  temperatureReadingUpperThresholdCriticalAtt14 DmiInteger
  temperatureReadingLowerThresholdNonRecoverableAtt15 DmiInteger
  temperatureReadingUpperThresholdNonRecoverableAtt16 DmiInteger
  temperatureProbeResolutionAtt17 DmiInteger
  temperatureProbeToleranceAtt18 DmiInteger
  temperatureProbeAccuracyAtt19 DmiInteger
  fRUGroupIndexAtt20-1 DmiInteger
  operationalGroupIndexAtt21-1 DmiInteger

SdMTFVoltageProbe  
SEQUENCE    
  dMTFVoltageProbeState INTEGER
  voltageProbeIndexAtt1 DmiInteger
  voltageProbeLocationAtt2 DmiInteger
  voltageProbeDescriptionAtt3 DmiDisplaystring
  voltageStatusAtt4 DmiInteger
  voltageProbeVoltageLevelAtt5 DmiInteger
  monitoredVoltageNominalLevelAtt6 DmiInteger
  monitoredVoltageNormalMaximumAtt7 DmiInteger
  monitoredVoltageNormalMinimumAtt8 DmiInteger
  voltageProbeMaximumAtt9 DmiInteger
  voltageProbeMinimumAtt10 DmiInteger
  voltageLevelLowerThresholdNonCriticalAtt11 DmiInteger
  voltageLevelUpperThresholdNonCriticalAtt12 DmiInteger
  voltageLevelLowerThresholdCriticalAtt13 DmiInteger
  voltageLevelUpperThresholdCriticalAtt14 DmiInteger
  voltageLevelLowerThresholdNonRecoverableAtt15 DmiInteger
  voltageLevelUpperThresholdNonRecoverableAtt16 DmiInteger
  voltageProbeResolutionAtt17 DmiInteger
  voltageProbeToleranceAtt18 DmiInteger
  voltageProbeAccuracyAtt19 DmiInteger
  fRUGroupIndexAtt20-2 DmiInteger
  operationalGroupIndexAtt21-2 DmiInteger

SdMTFPhysicalMemoryArray  
SEQUENCE    
  dMTFPhysicalMemoryArrayState INTEGER
  memoryArrayTableIndexAtt1 DmiInteger
  memoryArrayLocationAtt2 DmiInteger
  memoryArrayUseAtt3 DmiInteger
  maximumMemoryCapacityAtt4 DmiInteger
  numberOfMemoryDeviceSocketsAtt5 DmiInteger
  numberOfMemoryDeviceSocketsUsedAtt6 DmiInteger
  memoryErrorCorrectionAtt7 DmiInteger
  arrayErrorTypeAtt8 DmiInteger
  lastErrorUpdateAtt9 DmiInteger
  errorOperationAtt10 DmiInteger
  errorDataSizeAtt11 DmiInteger
  errorDataAtt12 DmiOctetstring
  vendorSyndromeAtt13 DmiOctetstring
  errorAddressAtt14 Dmi-Integer64
  errorResolutionAtt15 DmiInteger
  fRUGroupIndexAtt16 DmiInteger
  operationalGroupIndexAtt17 DmiInteger

SdMTFParallelPorts  
SEQUENCE    
  dMTFParallelPortsState INTEGER
  parallelPortIndexAtt1 DmiInteger
  parallelBaseIOAddressAtt2 Dmi-Integer64
  iRQUsedAtt3-1 DmiInteger
  logicalNameAtt4-1 DmiDisplaystring
  connectorTypeAtt5-1 DmiInteger
  connectorPinoutAtt6 DmiInteger
  dMASupportAtt7 DmiInteger
  parallelPortCapabilitiesAtt8 DmiInteger
  operationalGroupIndexAtt9-1 DmiInteger
  parallelPortSecuritySettingsAtt10 DmiInteger

SdELLSystemsManagementSoftware  
SEQUENCE    
  productAtt1 DmiDisplaystring
  versionAtt2 DmiDisplaystring
  buildNumberAtt3 DmiInteger
  descriptionAtt4 DmiDisplaystring
  supportedProtocolsAtt5 DmiInteger
  preferredProtocolAtt6 DmiInteger
  dMIRPCTypesAtt7 DmiDisplaystring

SdELLSystemsSummaryInformation  
SEQUENCE    
  operatingSystemAtt1 DmiInteger
  systemClassAtt2 DmiInteger

SdellMemoryPrefailure  
SEQUENCE    
  dellMemoryPrefailureState INTEGER
  memoryDeviceIndexAtt1 DmiInteger
  resetMemoryDeviceErrorCountAndPrefailureStatusAtt2 DmiInteger

Defined Values

dmtf 1.3.6.1.4.1.412
OBJECT IDENTIFIER    

dmtfStdMifs 1.3.6.1.4.1.412.2
OBJECT IDENTIFIER    

dmtfDynOids 1.3.6.1.4.1.412.3
OBJECT IDENTIFIER    

dmtfServiceLayerMIF 1.3.6.1.4.1.412.2.1
OBJECT IDENTIFIER    

dMTFComponentIDTable 1.3.6.1.4.1.412.2.1.1
This group defines the attributes common to all components. This group is required.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFComponentID

dMTFComponentIDEntry 1.3.6.1.4.1.412.2.1.1.1
This group defines the attributes common to all components. This group is required.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFComponentID  

manufacturerAtt1 1.3.6.1.4.1.412.2.1.1.1.1
Manufacturer of this system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

productAtt2 1.3.6.1.4.1.412.2.1.1.1.2
Product name for this system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

versionAtt3 1.3.6.1.4.1.412.2.1.1.1.3
Version number of this system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

serialNumberAtt4 1.3.6.1.4.1.412.2.1.1.1.4
Serial number for this system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

installationAtt5 1.3.6.1.4.1.412.2.1.1.1.5
The time and date when this component was installed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Dmi-Date  

verifyAtt6 1.3.6.1.4.1.412.2.1.1.1.6
A code that provides a level of verification that the component is still installed and working.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER anErrorOccurredCheckStatusCode(0), thisComponentDoesNotExist(1), verificationIsNotSupported(2), reserved(3), thisComponentExistsButTheFunctionalityIsUntested(4), thisComponentExistsButTheFunctionalityIsUnknown(5), thisComponentExistsAndIsNotFunctioningCorrectly(6), thisComponentExistsAndIsFunctioningCorrectly(7)  

dell 1.3.6.1.4.1.674
OBJECT IDENTIFIER    

server2 1.3.6.1.4.1.674.10891
OBJECT IDENTIFIER    

dellTemperatureProbeTable 1.3.6.1.4.1.674.10891.300
This group defines the attributes for the temperature probes this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdellTemperatureProbe

dellTemperatureProbeEntry 1.3.6.1.4.1.674.10891.300.1
This group defines the attributes for the temperature probes this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdellTemperatureProbe  

dellTemperatureProbeState 1.3.6.1.4.1.674.10891.300.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

tempParentIndexAtt1 1.3.6.1.4.1.674.10891.300.1.1
An index into the chassis table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

tempIndexAtt2 1.3.6.1.4.1.674.10891.300.1.2
index into this temperature probe table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

tempTypeAtt3 1.3.6.1.4.1.674.10891.300.1.3
Defines the type of the temperature probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), tMC(3), tVM(4), eSM(5), backplane(6), harrierBackplane(7)  

tempStatusAtt4 1.3.6.1.4.1.674.10891.300.1.4
Current status of the temperature probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

tempReadingAtt5 1.3.6.1.4.1.674.10891.300.1.5
The reading of the temperature probe in tenths of degrees.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

tempMinWarnAtt6 1.3.6.1.4.1.674.10891.300.1.6
The lower warning threshold for the temperature probe set by the user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

tempMaxWarnAtt7 1.3.6.1.4.1.674.10891.300.1.7
The upper warning threshold for the temperature probe set by the user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

tempMinFailAtt8 1.3.6.1.4.1.674.10891.300.1.8
The lower failure threshold for the temperature probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

tempMaxFailAtt9 1.3.6.1.4.1.674.10891.300.1.9
The upper failure threshold for the temperature probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

tempLocationAtt10 1.3.6.1.4.1.674.10891.300.1.10
The location of this temperature probe within the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

dellFanSensorTable 1.3.6.1.4.1.674.10891.301
This group defines the attributes for the fan probes this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdellFanSensor

dellFanSensorEntry 1.3.6.1.4.1.674.10891.301.1
This group defines the attributes for the fan probes this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdellFanSensor  

dellFanSensorState 1.3.6.1.4.1.674.10891.301.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

fansParentIndexAtt1 1.3.6.1.4.1.674.10891.301.1.1
An index into the chassis table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

fansIndexAtt2 1.3.6.1.4.1.674.10891.301.1.2
index into this fan probe table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

fansTypeAtt3 1.3.6.1.4.1.674.10891.301.1.3
Defines the type of the fan probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), boolean(3), rPM(4)  

fansStatusAtt4 1.3.6.1.4.1.674.10891.301.1.4
Current status of the fan probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

fansReadingAtt5 1.3.6.1.4.1.674.10891.301.1.5
The reading of the fan probe in RPM (or boolean).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

fansWarningMinAtt6 1.3.6.1.4.1.674.10891.301.1.6
The lower warning threshold for the fan probe set by the user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

fansMaxWarnAtt7 1.3.6.1.4.1.674.10891.301.1.7
The upper warning threshold for the fan probe set by the user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

fansMinFailAtt8 1.3.6.1.4.1.674.10891.301.1.8
The lower failure threshold for the fan probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

fansMaxFailAtt9 1.3.6.1.4.1.674.10891.301.1.9
The upper failure threshold for the fan probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

fansLocationAtt10 1.3.6.1.4.1.674.10891.301.1.10
The location of this fan probe within the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

dellVoltageProbeTable 1.3.6.1.4.1.674.10891.302
The Voltage group contains the data on all the voltage probes in a system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdellVoltageProbe

dellVoltageProbeEntry 1.3.6.1.4.1.674.10891.302.1
The Voltage group contains the data on all the voltage probes in a system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdellVoltageProbe  

dellVoltageProbeState 1.3.6.1.4.1.674.10891.302.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

voltParentIndexAtt1 1.3.6.1.4.1.674.10891.302.1.1
The chassis this voltage probe is connected to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

voltIndexAtt2 1.3.6.1.4.1.674.10891.302.1.2
the index of the voltage probe within the chassis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

voltTypeAtt3 1.3.6.1.4.1.674.10891.302.1.3
The type of voltage probe
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), v33(3), v33-1(4), v5(5), v5-1(6), v12(7), v12-1(8), v15(9), core(10)  

voltStatusAtt4 1.3.6.1.4.1.674.10891.302.1.4
Status of the voltage probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

voltReadingAtt5 1.3.6.1.4.1.674.10891.302.1.5
Current reading of the voltage probe, in millivolts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

voltMinWarnAtt6 1.3.6.1.4.1.674.10891.302.1.6
lower warning threshold value for this voltage probe.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

voltMaxWarnAtt7 1.3.6.1.4.1.674.10891.302.1.7
upper warning threshold value for this voltage probe.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

voltMinFailAtt8 1.3.6.1.4.1.674.10891.302.1.8
lower failure threshold value for this voltage probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

voltMaxFailAtt9 1.3.6.1.4.1.674.10891.302.1.9
upper failure threshold value for this voltage probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

voltLocationAtt10 1.3.6.1.4.1.674.10891.302.1.10
the location of this voltage probe within the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

dellCurrentProbeTable 1.3.6.1.4.1.674.10891.303
The Current group contains the data on all the Current probes in a system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdellCurrentProbe

dellCurrentProbeEntry 1.3.6.1.4.1.674.10891.303.1
The Current group contains the data on all the Current probes in a system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdellCurrentProbe  

dellCurrentProbeState 1.3.6.1.4.1.674.10891.303.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

ampParentIndexAtt1 1.3.6.1.4.1.674.10891.303.1.1
The chassis this current probe is connected to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

ampIndexAtt2 1.3.6.1.4.1.674.10891.303.1.2
the index of the current probe within the chassis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

ampTypeAtt3 1.3.6.1.4.1.674.10891.303.1.3
The type of current probe
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), v33(3), v33(4), v5(5), v5(6), v12(7), v12(8)  

ampStatusAtt4 1.3.6.1.4.1.674.10891.303.1.4
Status of the current probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

ampReadingAtt5 1.3.6.1.4.1.674.10891.303.1.5
Current reading of the current probe in milliamps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

ampMinWarnAtt6 1.3.6.1.4.1.674.10891.303.1.6
lower warning threshold value for this current probe.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

ampMaxWarnAtt7 1.3.6.1.4.1.674.10891.303.1.7
upper warning threshold value for this current probe.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

ampMinFailAtt8 1.3.6.1.4.1.674.10891.303.1.8
lower failure threshold value for this current probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

ampMaxFailAtt9 1.3.6.1.4.1.674.10891.303.1.9
upper failure threshold value for this current probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

ampLocationAtt10 1.3.6.1.4.1.674.10891.303.1.10
the location of this current probe within the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

dellRedundantPowerSupplyTable 1.3.6.1.4.1.674.10891.304
The Power Supply group contains the data on all the redundant power supplies in a system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdellRedundantPowerSupply

dellRedundantPowerSupplyEntry 1.3.6.1.4.1.674.10891.304.1
The Power Supply group contains the data on all the redundant power supplies in a system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdellRedundantPowerSupply  

dellRedundantPowerSupplyState 1.3.6.1.4.1.674.10891.304.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

pwrSupplyParentIndexAtt1 1.3.6.1.4.1.674.10891.304.1.1
The chassis this power supply is connected to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

pwrSupplyIndexAtt2 1.3.6.1.4.1.674.10891.304.1.2
The index within the chassis of this power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

pwrSupplyTypeAtt3 1.3.6.1.4.1.674.10891.304.1.3
The type of power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), pSPB(3), x230W(4), x500W(5), x700W(6), x320W(7), x275W(8)  

pwrSupplyStatusAtt4 1.3.6.1.4.1.674.10891.304.1.4
The current status of this power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

pwrSupplyOnlineAtt5 1.3.6.1.4.1.674.10891.304.1.5
The current online status of this power supply. Setting this value to FALSE will turn off the power supply, setting it to TRUE will turn on the power supply.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

pwrLocationAtt6 1.3.6.1.4.1.674.10891.304.1.6
the location of this power supply within the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

dellGlobalPowerUnitTable 1.3.6.1.4.1.674.10891.305
This group contains the global status for the power supplies in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdellGlobalPowerUnit

dellGlobalPowerUnitEntry 1.3.6.1.4.1.674.10891.305.1
This group contains the global status for the power supplies in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdellGlobalPowerUnit  

dellGlobalPowerUnitState 1.3.6.1.4.1.674.10891.305.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

pwrUnitStatusAtt1 1.3.6.1.4.1.674.10891.305.1.1
The current redundancy status of the power unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), notApplicableUnitNotRedundant(3), offline(4), fullyRedundant(5), degradedRedundancy(6), redundancyLost(7)  

pwrUnitGlobalLevelAtt2 1.3.6.1.4.1.674.10891.305.1.2
The current global power level usage, in percent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

pwrUnitGlobalMaxWarnAtt3 1.3.6.1.4.1.674.10891.305.1.3
Warning threshold, in percent
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

pwrUnitLevel33vAtt4 1.3.6.1.4.1.674.10891.305.1.4
The current 3.3v power level usage, in percent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

pwrUnitMaxWarn33vAtt5 1.3.6.1.4.1.674.10891.305.1.5
Warning threshold, in percent
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

pwrUnitLevel5vAtt6 1.3.6.1.4.1.674.10891.305.1.6
The current 5v power level usage, in percent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

pwrUnitMaxWarn5vAtt7 1.3.6.1.4.1.674.10891.305.1.7
Warning threshold, in percent
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

pwrUnitLevel12vAtt8 1.3.6.1.4.1.674.10891.305.1.8
The current 12v power level usage, in percent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

pwrUnitMaxWarn12vAtt9 1.3.6.1.4.1.674.10891.305.1.9
Warning threshold, in percent
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

pwrUnitUidAtt10 1.3.6.1.4.1.674.10891.305.1.10
The unique ID for this power supply unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

pwrUnitIndexAtt11 1.3.6.1.4.1.674.10891.305.1.11
The index into the power supply unit table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dellSystemChassisExtensionTable 1.3.6.1.4.1.674.10891.306
Global status of devices in chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdellSystemChassisExtension

dellSystemChassisExtensionEntry 1.3.6.1.4.1.674.10891.306.1
Global status of devices in chassis.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdellSystemChassisExtension  

dellSystemChassisExtensionState 1.3.6.1.4.1.674.10891.306.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

chassIndexAtt1 1.3.6.1.4.1.674.10891.306.1.1
Physical container index
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

chassGlobStatusAtt2 1.3.6.1.4.1.674.10891.306.1.2
Global status of all devices in chassis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

chassTempStatusAtt3 1.3.6.1.4.1.674.10891.306.1.3
Global status of temperature probes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

chassTempProbesAtt4 1.3.6.1.4.1.674.10891.306.1.4
This contains the statuses of all temp probes in the system, one probe per octet. The value of each octet is the value of the status field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiOctetstring  

chassFansStatusAtt5 1.3.6.1.4.1.674.10891.306.1.5
Global status of fan sensors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

chassFansProbesAtt6 1.3.6.1.4.1.674.10891.306.1.6
This contains the statuses of all fan probes in the system, one probe per octet. The value of each octet is the value of the status field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiOctetstring  

chassVoltStatusAtt7 1.3.6.1.4.1.674.10891.306.1.7
Global status of voltage probes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

chassVoltProbesAtt8 1.3.6.1.4.1.674.10891.306.1.8
This contains the statuses of all volt probes in the system, one probe per octet. The value of each octet is the value of the status field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiOctetstring  

chassAmpStatusAtt9 1.3.6.1.4.1.674.10891.306.1.9
Global status of current probes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

chassAmpProbesAtt10 1.3.6.1.4.1.674.10891.306.1.10
This contains the statuses of all amp probes in the system, one probe per octet. The value of each octet is the value of the status field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiOctetstring  

chassPsStatusAtt11 1.3.6.1.4.1.674.10891.306.1.11
Global status of power supplies.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

chassPwrSuppliesAtt12 1.3.6.1.4.1.674.10891.306.1.12
This contains the statuses of all power supplies in the system, one probe per octet. The value of each octet is the value of the status field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiOctetstring  

chassServiceTagAtt13 1.3.6.1.4.1.674.10891.306.1.13
This is the service tag for this chassis, if it exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

chassUidAtt14 1.3.6.1.4.1.674.10891.306.1.14
This is the Unique ID for this chassis, if it exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

chassBackPlaneUidAtt15 1.3.6.1.4.1.674.10891.306.1.15
This is the Unique ID for the backplane in this chassis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

chassIdentifyAtt16 1.3.6.1.4.1.674.10891.306.1.16
This attribute is used to visually identify a disk pod or other chassis by causing its lights to flash. Setting this value to non-zero turns on the identify, setting it back to zero turns it off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

chassFanControlAtt17 1.3.6.1.4.1.674.10891.306.1.17
This attribute is used to control the fan speed in a chassis. If the value is 0, then fan control is notavailable. A value of 2 indicates maximum cooling. Avalue of 1 indicates minimize fan noise (and speed).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

chassLEDConfigAtt18 1.3.6.1.4.1.674.10891.306.1.18
This attribute is used to configure which fault conditionscause the fault LED to flash. If the value is 0, thenthis feature is not available. A value of 16 indicatesflash for failure conditions. A value of 8 indicatesfla h for failure and warning conditions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

chassFaultClearAtt19 1.3.6.1.4.1.674.10891.306.1.19
This attribute is used to clear the hard drive fault LED.If this value is non-zero, then it is available. Writingany value to this attribut will clear the hard drive faultLED.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

chassThermalShutdownAtt20 1.3.6.1.4.1.674.10891.306.1.20
This attribute is used to enable thermal shutdown of a chassis. If the value is -1, then thermal shutdown is notenabled. A value of 5 will shutdown on failures, a value of 4will shutdown on failures and warnings.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

chassMemStatusAtt21 1.3.6.1.4.1.674.10891.306.1.21
Global status of Memory Devices.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

chassMemDevicesAtt22 1.3.6.1.4.1.674.10891.306.1.22
This contains the statuses of all memory devices in the system, one device per octet. The value of each octet is the value of the status field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiOctetstring  

dmtfSystemsMIF 1.3.6.1.4.1.412.2.4
OBJECT IDENTIFIER    

dMTFPhysicalContainerGlobalTableTable 1.3.6.1.4.1.412.2.4.63
This group of attributes describes the fields in a row ofthe Physical Container Global Table. This table lists all of the containers (e.g. chassis, sub-chassis, etc.) included within the component whose structure is being described
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFPhysicalContainerGlobalTable

dMTFPhysicalContainerGlobalTableEntry 1.3.6.1.4.1.412.2.4.63.1
This group of attributes describes the fields in a row ofthe Physical Container Global Table. This table lists all of the containers (e.g. chassis, sub-chassis, etc.) included within the component whose structure is being described
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFPhysicalContainerGlobalTable  

dMTFPhysicalContainerGlobalTableState 1.3.6.1.4.1.412.2.4.63.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

containerOrChassisTypeAtt1 1.3.6.1.4.1.412.2.4.63.1.1
The type of container or chassis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), desktop(3), lowProfileDesktop(4), pizzaBox(5), miniTower(6), tower(7), portable(8), lapTop(9), notebook(10), handHeld(11), dockingStation(12), allInOne(13), subNotebook(14), spaceSaving(15), lunchBox(16), mainSystemChassis(17), expansionChassis(18), subChassis(19), busExpansionChassis(20), peripheralChassis(21), rAIDChassis(22), rackMountChassis(23), sealedCasePC(24)  

assetTagAtt2 1.3.6.1.4.1.412.2.4.63.1.2
The Container asset tag string. This asset tag string is writeable by the system administrator.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

chassisLockPresentAtt3 1.3.6.1.4.1.412.2.4.63.1.3
If true, a chassis lock is present on the Container.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

bootupStateAtt4 1.3.6.1.4.1.412.2.4.63.1.4
The current state of this system when it booted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), warning(4), critical(5), nonRecoverable-1(6)  

powerStateAtt5 1.3.6.1.4.1.412.2.4.63.1.5
The current state of the power supply or battery(s) for this system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), warning(4), critical(5), nonRecoverable(6)  

thermalStateAtt6 1.3.6.1.4.1.412.2.4.63.1.6
The current thermal state of this Container.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), warning(4), critical(5), nonRecoverable(6)  

fRUGroupIndexAtt7 1.3.6.1.4.1.412.2.4.63.1.7
If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operationalGroupIndexAtt8 1.3.6.1.4.1.412.2.4.63.1.8
The index into the Operational State table for this device if applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

containerIndexAtt9 1.3.6.1.4.1.412.2.4.63.1.9
A unique index for the Physical Container in Physical Container Global Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

containerNameAtt10 1.3.6.1.4.1.412.2.4.63.1.10
This is any 64-octet long name that the user or system administr tor wishes to give this specific physical container.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

containerLocationAtt11 1.3.6.1.4.1.412.2.4.63.1.11
This attribute is a string name for the location of the containe . This attribute is Read-Write and may be set to any appropriate value by the user. The string may be 128 octets long.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

containerSecurityStatusAtt12 1.3.6.1.4.1.412.2.4.63.1.12
This attribute describes whether the Container is physically secure or not. This includes the state of the door lock, or the boot devices or the keyboard or mouse.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), noSecurityBreachDetected(3), containerSecurityBreachAttempted(4), containerSecurityBreached(5)  

dellSystemResetTable 1.3.6.1.4.1.674.10891.312
This group defines whether System Control functions are availabl and enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdellSystemReset

dellSystemResetEntry 1.3.6.1.4.1.674.10891.312.1
This group defines whether System Control functions are availabl and enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdellSystemReset  

automaticCapabilitiesAtt1 1.3.6.1.4.1.674.10891.312.1.1
Indicates which Automatic Capabilities are available for the current operating system. Encoding is as follows: 0x1 = Supports Reboot 0x2 = Supports Power Cycle 0x4 = Supports Notification 0x8 = Supports Configurable Timer If value is nonzero, Watchdog is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

automaticSettingsAtt2 1.3.6.1.4.1.674.10891.312.1.2
Indicates which Automatic Settings are enabled by the user. Encoding is as follows: 0x1 = Enabled w/ Reboot 0x2 = Enabled w/ Power Cycle 0x4 = Enabled w/ Notification If value is nonzero, Watchdog is Enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

notificationNumberAtt3 1.3.6.1.4.1.674.10891.312.1.3
The number to dial when the watchdog timer elapses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

manualCapabilitiesAtt4 1.3.6.1.4.1.674.10891.312.1.4
Describes which system reset actions may occur.Bit encodings: 0x1 = Reboot 0x2 = Power Off 0x4 = Power Cycle 0x8 = Shutdown OS
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

manualControlAtt5 1.3.6.1.4.1.674.10891.312.1.5
Setting this value will immediately perform one of the following functions. Encoding as follows: Bit encoding: 0x1 = Reboot 0x2 = Power Off 0x4 = Power Cycle 0x8 = Shutdown OS
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

automaticSystemResetTimerAtt6 1.3.6.1.4.1.674.10891.312.1.6
Automatic System Reset Timer in seconds. Minimum value is 20 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

dellEsmLogTable 1.3.6.1.4.1.674.10891.307
ESM Event Log.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdellEsmLog

dellEsmLogEntry 1.3.6.1.4.1.674.10891.307.1
ESM Event Log.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdellEsmLog  

dellEsmLogState 1.3.6.1.4.1.674.10891.307.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

esmLogIndexAtt1 1.3.6.1.4.1.674.10891.307.1.1
KEY: The index to this log.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

esmLogDataAtt2 1.3.6.1.4.1.674.10891.307.1.2
The event log data for the ESM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

dellPOSTLogTable 1.3.6.1.4.1.674.10891.308
POST Codes Event Log.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdellPOSTLog

dellPOSTLogEntry 1.3.6.1.4.1.674.10891.308.1
POST Codes Event Log.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdellPOSTLog  

dellPOSTLogState 1.3.6.1.4.1.674.10891.308.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

postLogIndexAtt1 1.3.6.1.4.1.674.10891.308.1.1
KEY: The index into the post log.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

postLogDataAtt2 1.3.6.1.4.1.674.10891.308.1.2
The event log data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiOctetstring  

dellSecurityTable 1.3.6.1.4.1.674.10891.309
Security Group - contains user database: Used by both DSA and Baseboard components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdellSecurity

dellSecurityEntry 1.3.6.1.4.1.674.10891.309.1
Security Group - contains user database: Used by both DSA and Baseboard components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdellSecurity  

dellSecurityState 1.3.6.1.4.1.674.10891.309.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

userIndexAtt1 1.3.6.1.4.1.674.10891.309.1.1
Keyed ID for this group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

userNameAtt2 1.3.6.1.4.1.674.10891.309.1.2
User name. First user name is 'create', allows creation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

userControlAtt3 1.3.6.1.4.1.674.10891.309.1.3
User control. Used for creating/deleting/editing users.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

requestAtt4 1.3.6.1.4.1.674.10891.309.1.4
Request field used for sets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

dellDialupTable 1.3.6.1.4.1.674.10891.310
Dialup Control - contains information used by the ESM dialup interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdellDialup

dellDialupEntry 1.3.6.1.4.1.674.10891.310.1
Dialup Control - contains information used by the ESM dialup interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdellDialup  

dialupCapabilityAtt1 1.3.6.1.4.1.674.10891.310.1.1
Specifies if this system supports dialup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

callbackNumberAtt2 1.3.6.1.4.1.674.10891.310.1.2
The number to callback when a dialup connection is established.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

dellFirmwareTable 1.3.6.1.4.1.674.10891.311
Firmware Information - Contains version/status of firmware.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdellFirmware

dellFirmwareEntry 1.3.6.1.4.1.674.10891.311.1
Firmware Information - Contains version/status of firmware.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdellFirmware  

dellFirmwareState 1.3.6.1.4.1.674.10891.311.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

firmwareChassisIndexAtt1 1.3.6.1.4.1.674.10891.311.1.1
Firmware chassis index
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

firmwareIndexAtt2 1.3.6.1.4.1.674.10891.311.1.2
Index into the firmware information table
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

firmwareTypeAtt3 1.3.6.1.4.1.674.10891.311.1.3
The type of this firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), unknown(2), bIOS(3), eSM(4), pSPB(5), backplane(6)  

firmwareVersionAtt4 1.3.6.1.4.1.674.10891.311.1.4
Version level of this firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

firmwareStatusAtt5 1.3.6.1.4.1.674.10891.311.1.5
Current status of this firmware, if applicable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

dMTFCoolingDeviceTable 1.3.6.1.4.1.412.2.4.17
This group defines various attributes for cooling devices in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFCoolingDevice

dMTFCoolingDeviceEntry 1.3.6.1.4.1.412.2.4.17.1
This group defines various attributes for cooling devices in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFCoolingDevice  

dMTFCoolingDeviceState 1.3.6.1.4.1.412.2.4.17.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

coolingDeviceTableIndexAtt1 1.3.6.1.4.1.412.2.4.17.1.1
An index into the cooling device table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

fRUGroupIndexAtt2 1.3.6.1.4.1.412.2.4.17.1.2
If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operationalGroupIndexAtt3 1.3.6.1.4.1.412.2.4.17.1.3
The index into the Operational State table for this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

coolingUnitIndexAtt4 1.3.6.1.4.1.412.2.4.17.1.4
This is the ID of the Cooling Unit (logical cooling device) of which this Cooling Device is a part. This value matches up with the Cooling Unit Table Index attribute defined in the Cooling Unit Global Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

coolingDeviceTypeAtt5 1.3.6.1.4.1.412.2.4.17.1.5
The type of Cooling Device that this is e.g. Fan, Heat Pipe, etc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), fan(3), centrifugalBlower(4), chipFan(5), cabinetFan(6), powerSupplyFan(7), heatPipe(8), integratedRefrigeration(9), activeCooling(32), passiveCooling(33)  

temperatureProbeIndexAtt6 1.3.6.1.4.1.412.2.4.17.1.6
Index into the Temperature Probe table identifying the temperatu e probe monitoring this cooling device. 0 indicates no probe provided.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dMTFElectricalCurrentProbeTable 1.3.6.1.4.1.412.2.4.55
This group defines the attributes for the current probes in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFElectricalCurrentProbe

dMTFElectricalCurrentProbeEntry 1.3.6.1.4.1.412.2.4.55.1
This group defines the attributes for the current probes in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFElectricalCurrentProbe  

dMTFElectricalCurrentProbeState 1.3.6.1.4.1.412.2.4.55.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

electricalCurrentProbeTableIndexAtt1 1.3.6.1.4.1.412.2.4.55.1.1
Index into this electrical current probe table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

electricalCurrentProbeLocationAtt2 1.3.6.1.4.1.412.2.4.55.1.2
Identifies the physical location of the electrical current probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), processor(3), disk(4), peripheralBay(5), sMBMaster(6), motherboard(7), memoryModule(8), processorModule(9), powerUnit(10), addInCard(11)  

electricalCurrentProbeDescriptionAtt3 1.3.6.1.4.1.412.2.4.55.1.3
Additional descriptive information about the electrical current probe or probe's location.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

electricalCurrentStatusAtt4 1.3.6.1.4.1.412.2.4.55.1.4
Defines the status of the electrical current monitored by this electrical current probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

electricalCurrentProbeReadingAtt5 1.3.6.1.4.1.412.2.4.55.1.5
The present electrical current reading of this probe in milliamp . 0x8000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

monitoredElectricalCurrentNominalReadingAtt6 1.3.6.1.4.1.412.2.4.55.1.6
The nominal electrical current reading of the current monitored by this probe in milliamps. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

monitoredElectricalCurrentNormalMaximumAtt7 1.3.6.1.4.1.412.2.4.55.1.7
The normal maximum electrical current reading of the current monitored by this probe in milliamps. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

monitoredElectricalCurrentNormalMinimumAtt8 1.3.6.1.4.1.412.2.4.55.1.8
The normal minimum electrical current reading of the current monitored by this probe in milliamps. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

electricalCurrentProbeMaximumAtt9 1.3.6.1.4.1.412.2.4.55.1.9
The maximum electrical current reading specified to be readable by this probe in milliamps. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

electricalCurrentProbeMinimumAtt10 1.3.6.1.4.1.412.2.4.55.1.10
The minimum electrical current reading specified to be readable by this probe in milliamps. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

electricalCurrentReadingLowerThresholdNonCriticalAtt11 1.3.6.1.4.1.412.2.4.55.1.11
The lower non-critical threshold for the electrical current reading set by the user, in milliamps. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

electricalCurrentReadingUpperThresholdNonCriticalAtt12 1.3.6.1.4.1.412.2.4.55.1.12
The upper non-critical threshold for the electrical current reading, in milliamps. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

electricalCurrentReadingLowerThresholdCriticalAtt13 1.3.6.1.4.1.412.2.4.55.1.13
The lower critical threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

currentReadingUpperThresholdCriticalAtt14 1.3.6.1.4.1.412.2.4.55.1.14
The upper critical threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

electricalCurrentReadingLowerThresholdNonRecoverabAtt15 1.3.6.1.4.1.412.2.4.55.1.15
The lower non-recoverable threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

electricalCurrentReadingUpperThresholdNonRecoverabAtt16 1.3.6.1.4.1.412.2.4.55.1.16
The upper non-recoverable threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

electricalCurrentProbeResolutionAtt17 1.3.6.1.4.1.412.2.4.55.1.17
The resolution for the reading from this electrical current probe, in tenths of milliamps. '0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

electricalCurrentProbeToleranceAtt18 1.3.6.1.4.1.412.2.4.55.1.18
The tolerance for the reading from this electrical current probe, in plus/minus milliamps. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

electricalCurrentProbeAccuracyAtt19 1.3.6.1.4.1.412.2.4.55.1.19
The accuracy for the reading from this electrical current probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

fRUGroupIndexAtt20 1.3.6.1.4.1.412.2.4.55.1.20
Index into the FRU table
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operationalGroupIndexAtt21 1.3.6.1.4.1.412.2.4.55.1.21
Index into the Operational State table
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dMTFFRUTable 1.3.6.1.4.1.412.2.4.29
A Field Replaceable Unit (FRU), is defined as a hardware component which is designed to be separately removable for replacement or repair. For the purposes of this definition, a motherboard and a fixed hard disk are FRUs, whereas a fixed hard disk platter or a chip fixed in place on the motherboard are not FRUs since they are not designed to be separately removable. Each instance within the FRU table should contain the device group and instance data for the associated hardware component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFFRU

dMTFFRUEntry 1.3.6.1.4.1.412.2.4.29.1
A Field Replaceable Unit (FRU), is defined as a hardware component which is designed to be separately removable for replacement or repair. For the purposes of this definition, a motherboard and a fixed hard disk are FRUs, whereas a fixed hard disk platter or a chip fixed in place on the motherboard are not FRUs since they are not designed to be separately removable. Each instance within the FRU table should contain the device group and instance data for the associated hardware component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFFRU  

dMTFFRUState 1.3.6.1.4.1.412.2.4.29.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

fRUIndexAtt1 1.3.6.1.4.1.412.2.4.29.1.1
The index into the Field Replaceable Unit table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

deviceGroupIndexAtt2 1.3.6.1.4.1.412.2.4.29.1.2
The group ID of the group referencing this Field Replaceable Unit instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

descriptionAtt3 1.3.6.1.4.1.412.2.4.29.1.3
A clear description of this Field Replaceable Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

manufacturerAtt4 1.3.6.1.4.1.412.2.4.29.1.4
The name of the company manufacturing or providing this Field Replaceable Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

modelAtt5 1.3.6.1.4.1.412.2.4.29.1.5
The manufacturer's model number for this Field Replaceable Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

partNumberAtt6 1.3.6.1.4.1.412.2.4.29.1.6
A part number by which a replacement part can be ordered for this Field Replaceable Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

fRUSerialNumberAtt7 1.3.6.1.4.1.412.2.4.29.1.7
The manufacturer's serial number for this Field Replaceable Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

revisionLevelAtt8 1.3.6.1.4.1.412.2.4.29.1.8
The revision level of this Field Replaceable Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

warrantyStartDateAtt9 1.3.6.1.4.1.412.2.4.29.1.9
The start date of the service warranty for this Field Replaceabl Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Dmi-Date  

warrantyDurationAtt10 1.3.6.1.4.1.412.2.4.29.1.10
The total duration of this Field Replaceable Unit warranty in months.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

supportPhoneNumberAtt11 1.3.6.1.4.1.412.2.4.29.1.11
The phone number(s) for support for this Field Replaceable Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

fRUInternetUniformResourceLocatorAtt12 1.3.6.1.4.1.412.2.4.29.1.12
The Internet Uniform Resource Locator string that can be used through a World Wide Web browser to obtain further information about this FRU
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

dMTFGeneralInformationTable 1.3.6.1.4.1.412.2.4.1
This group defines general information about this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFGeneralInformation

dMTFGeneralInformationEntry 1.3.6.1.4.1.412.2.4.1.1
This group defines general information about this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFGeneralInformation  

systemNameAtt1 1.3.6.1.4.1.412.2.4.1.1.1
A name to identify this system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

systemLocationAtt2 1.3.6.1.4.1.412.2.4.1.1.2
The physical location of this system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

systemPrimaryUserNameAtt3 1.3.6.1.4.1.412.2.4.1.1.3
The name of the primary user or owner of this system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

systemPrimaryUserPhoneAtt4 1.3.6.1.4.1.412.2.4.1.1.4
The phone number of the primary user of this system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiDisplaystring  

systemBootupTimeAtt5 1.3.6.1.4.1.412.2.4.1.1.5
The time at which the system was last booted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Dmi-Date  

systemDateTimeAtt6 1.3.6.1.4.1.412.2.4.1.1.6
The actual system date and time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Dmi-Date  

dMTFMemoryArrayMappedAddressesTable 1.3.6.1.4.1.412.2.4.34
This table presents ranges of physical addresses that are mapped to a given Memory Array.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFMemoryArrayMappedAddresses

dMTFMemoryArrayMappedAddressesEntry 1.3.6.1.4.1.412.2.4.34.1
This table presents ranges of physical addresses that are mapped to a given Memory Array.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFMemoryArrayMappedAddresses  

dMTFMemoryArrayMappedAddressesState 1.3.6.1.4.1.412.2.4.34.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

memoryArrayMappedAddressesTableIndexAtt1 1.3.6.1.4.1.412.2.4.34.1.1
A unique number that identifies this row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

memoryArrayIndexAtt2 1.3.6.1.4.1.412.2.4.34.1.2
The ID of the Memory Array that this address range is mapped to. Multiple address ranges may be mapped to a Memory Array.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

mappedRangeStartingAddressAtt3 1.3.6.1.4.1.412.2.4.34.1.3
The physical starting address, in kilobytes, of a range of memory mapped to the specified Memory Array. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

mappedRangeEndingAddressAtt4 1.3.6.1.4.1.412.2.4.34.1.4
The physical ending address of the last kilobyte of a range of addresses mapped to the specified Memory Array. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

partitionIDAtt5 1.3.6.1.4.1.412.2.4.34.1.5
Identifies a Memory Partition associated with the Memory Array specified by Memory Array Table Index. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

partitionWidthAtt6 1.3.6.1.4.1.412.2.4.34.1.6
The number of Memory Devices that form a single row of memory for the partition. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operationalGroupIndexAtt7 1.3.6.1.4.1.412.2.4.34.1.7
The index into the Operational State Table for this Memory Range. Generally, there will be a 1:1 correspondence between a mapped range and a partition. In which case, the Operational State will be for the partition as well. In the case that there is more than one mapped range for a partion, it will be necessary to check the Operational State entries for each range to determine the overall status of the partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dMTFMemoryDeviceMappedAddressesTable 1.3.6.1.4.1.412.2.4.36
This table presents ranges of physical addresses that are mapped to a given Memory Device Set.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFMemoryDeviceMappedAddresses

dMTFMemoryDeviceMappedAddressesEntry 1.3.6.1.4.1.412.2.4.36.1
This table presents ranges of physical addresses that are mapped to a given Memory Device Set.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFMemoryDeviceMappedAddresses  

dMTFMemoryDeviceMappedAddressesState 1.3.6.1.4.1.412.2.4.36.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

memoryDeviceMappedAddressesTableIndexAtt1 1.3.6.1.4.1.412.2.4.36.1.1
A unique number that identifies this row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

memoryDeviceSetIDAtt2 1.3.6.1.4.1.412.2.4.36.1.2
The row in the Memory Device table that this address range is for. This matches with a Memory Device Table Index. There may be multiple rows in Memory Device Mapped addresses for a single Memory Device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

partitionAtt3 1.3.6.1.4.1.412.2.4.36.1.3
Identifies the Memory partition in the Memory Array Mapped Addresses table that this Memory Device is part of. Partition number should be positive. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

mappedRangeStartingAddressAtt4 1.3.6.1.4.1.412.2.4.36.1.4
The physical starting address, in kilobytes, of a range of memory mapped to the specified Memory Device set. The address is specified relative to the bus that the device is connected to. 0x80000000 denotes 'unknown .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

mappedRangeEndingAddressAtt5 1.3.6.1.4.1.412.2.4.36.1.5
The physical ending address of the last kilobyte of a range of addresses mapped to the specified Memory Device. The address is specified relative to the bus that the device is connected to. 0x80000000 denotes 'unknown .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

partitionRowPositionAtt6 1.3.6.1.4.1.412.2.4.36.1.6
This specifies the position of the device in a row of the partition. For example, if it takes two 8-bit memory devices to form a 16-bit row, then a value of '2'in this attribute means the device is the second device. 0 is an invalid return value. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

interleavePositionAtt7 1.3.6.1.4.1.412.2.4.36.1.7
The position of this device in an interleave. 0 indicates non-interleaved. 1 indicates the first position 2 the second, and so on. For example, in a 2:1 interleave, a value of '1' would indicate the device is in the 'even' position, in a 4:1 interleave this would be the first of four possible positions). 0x80000000 denotes 'unknown' or'unsupported'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dataDepthAtt8 1.3.6.1.4.1.412.2.4.36.1.8
The maximum number of consecutive rows accessed from this device in a single interleaved transfer. For example, if a device transfers two rows each time it is read, its Interleaved Data Depth would be 2. If that device is 2:1 interleaved and in Interleave Position '1', then the rows mapped to that device would be rows 1,2,5,6,9,10, etc. If the device is not part of an interleave, this value should be 0. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dMTFMemoryDeviceTable 1.3.6.1.4.1.412.2.4.35
This group presents information about individual memory devices in the system. A memory device can be a SIMM, a SIPP, or a single chip, or an entire card-based on the resolution to which a memory error can be determined and whether the device is replaceable as a unit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFMemoryDevice

dMTFMemoryDeviceEntry 1.3.6.1.4.1.412.2.4.35.1
This group presents information about individual memory devices in the system. A memory device can be a SIMM, a SIPP, or a single chip, or an entire card-based on the resolution to which a memory error can be determined and whether the device is replaceable as a unit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFMemoryDevice  

dMTFMemoryDeviceState 1.3.6.1.4.1.412.2.4.35.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

memoryDeviceTableIndexAtt1 1.3.6.1.4.1.412.2.4.35.1.1
A unique number that identifies this row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

memoryArrayIndexAtt2-1 1.3.6.1.4.1.412.2.4.35.1.2
The ID of the Memory Array that this Memory Device is a part of.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

deviceLocatorAtt3 1.3.6.1.4.1.412.2.4.35.1.3
A string identifying the physically labeled socket or board position where the memory device is located. Eg. 'SIMM 3' or 'IC12'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

bankLocatorAtt4 1.3.6.1.4.1.412.2.4.35.1.4
A string identifying the physically labeled bank where the memory device is located. Eg. 'Bank 0' or 'A'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

sizeAtt5 1.3.6.1.4.1.412.2.4.35.1.5
Size of this memory device, in bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

formFactorAtt6 1.3.6.1.4.1.412.2.4.35.1.6
Implementation form factor for this memory device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), sIMM(3), sIP(4), chip(5), dIP(6), zIP(7), proprietaryCard(8), dIMM(9), tSOP(10), rowOfChips(11)  

totalWidthAtt7 1.3.6.1.4.1.412.2.4.35.1.7
Total width of this memory device, including check or error correction bits, in bits. If there are no error correction bits, the value in this attribute should match that specified in Data Width. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dataWidthAtt8 1.3.6.1.4.1.412.2.4.35.1.8
Data width of this memory device, in bits. A data width of 0 and a Total Width of 8 would indicate that the device is solely being used to provide eight error correction bits. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

memoryTypeAtt9 1.3.6.1.4.1.412.2.4.35.1.9
Type of memory used in this memory device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), dRAM(3), eDRAM(4), vRAM(5), sRAM(6), rAM(7), rOM(8), fLASH(9), eEPROM(10), fEPROM(11), ePROM(12)  

typeDetailAtt10 1.3.6.1.4.1.412.2.4.35.1.10
Additional detail on the device type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), fastPaged(3), staticColumn(4), pseudoStatic(5), rAMBUS(6), synchronous(7), cMOS(8), eDO(9), windowDRAM(10), cacheDRAM(11), nonVolatile(12)  

deviceSetAtt11 1.3.6.1.4.1.412.2.4.35.1.11
This attribute is used to identify when the Memory Device is one of a set of Memory Devices that must be populated with all devices of the same type and size, and which set the device belongs to. For example, when one SIMM belongs to a set of four. 0 indicates the Memory Device isn't part of a set. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

deviceErrorTypeAtt12 1.3.6.1.4.1.412.2.4.35.1.12
The type of error that is associated with the current status reported in Operational State for this Memory Device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), badRead(4), parityError(5), singleBitError(6), doubleBitError(7), multiBitError(8), nibbleError(9), checksumError(10), cRCError(11), correctedSingleBitError(12), correctedError(13), uncorrectableError(14)  

errorGranularityAtt13 1.3.6.1.4.1.412.2.4.35.1.13
Specifies whether the current error's location can be resolved to the partition or device level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), deviceLevel(3), memoryPartitionLevel(4)  

lastErrorUpdateAtt14 1.3.6.1.4.1.412.2.4.35.1.14
System state during which the last error update was collected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), noUpdateSinceLastInstrumentationStart(3), updatedFromInformationObtainedPriorToInstrumentati(4), updatedDuringInstrumentationRunTime(5)  

errorOperationAtt15 1.3.6.1.4.1.412.2.4.35.1.15
The memory access operation that caused the current error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), read(3), write(4), partialWrite(5)  

errorDataSizeAtt16 1.3.6.1.4.1.412.2.4.35.1.16
The size of the data transfer that caused the error,in bits. Zero indicates no error, 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

errorDataAtt17 1.3.6.1.4.1.412.2.4.35.1.17
Data captured during the erroneous Memory Array access. The data occupies the first n bytes of the octet string required to hold 'Error Data Size' bits of the data. Data is stored least-significant byte first.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiOctetstring  

vendorSyndromeAtt18 1.3.6.1.4.1.412.2.4.35.1.18
Vendor-specific syndrome or CRC data associated with the erroneous access.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiOctetstring  

deviceErrorAddressAtt19 1.3.6.1.4.1.412.2.4.35.1.19
Physical address of the error relative to the start of the device, in bytes. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

arrayErrorAddressAtt20 1.3.6.1.4.1.412.2.4.35.1.20
Physical address of the kilobyte where the error is located, relative to the bus for the Memory Array. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

errorResolutionAtt21 1.3.6.1.4.1.412.2.4.35.1.21
Range in bytes that the error can be determined to be within,whe an Error Address is given. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

fRUGroupIndexAtt22 1.3.6.1.4.1.412.2.4.35.1.22
If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operationalGroupIndexAtt23 1.3.6.1.4.1.412.2.4.35.1.23
The index into the Operational State Table for this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dMTFOperatingSystemTable 1.3.6.1.4.1.412.2.4.2
This group defines general information about operating systems installed on this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFOperatingSystem

dMTFOperatingSystemEntry 1.3.6.1.4.1.412.2.4.2.1
This group defines general information about operating systems installed on this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFOperatingSystem  

dMTFOperatingSystemState 1.3.6.1.4.1.412.2.4.2.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

operatingSystemIndexAtt1 1.3.6.1.4.1.412.2.4.2.1.1
The index into the operating system table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operatingSystemNameAtt2 1.3.6.1.4.1.412.2.4.2.1.2
The name of this operating system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

operatingSystemVersionAtt3 1.3.6.1.4.1.412.2.4.2.1.3
The version number of this operating system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

primaryOperatingSystemAtt4 1.3.6.1.4.1.412.2.4.2.1.4
If true, this is the primary operating system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

operatingSystemBootDeviceStorageTypeAtt5 1.3.6.1.4.1.412.2.4.2.1.5
An index into the Disks Table to indicate the device from which this operating system was booted. To fully access the Disks Table, this index must be combined with the attribute Boot Device Index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), hardDisk(3), floppyDisk(4), opticalROM(5), opticalWORM(6), opticalRW(7), compactDisk(8), flashDisk(9), bernoulli(10), opticalFloppyDisk(11)  

operatingSystemBootDeviceIndexAtt6 1.3.6.1.4.1.412.2.4.2.1.6
An index into the Disks Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operatingSystemBootPartitionIndexAtt7 1.3.6.1.4.1.412.2.4.2.1.7
An index into the Partition table indicating the partition from which this operating system booted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operatingSystemDescriptionAtt8 1.3.6.1.4.1.412.2.4.2.1.8
A description of this operating system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

dMTFOperationalStateTable 1.3.6.1.4.1.412.2.4.30
This group provides the operational state, usage, and availabili y status,and administrative state indicators for specific Device Group instances
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFOperationalState

dMTFOperationalStateEntry 1.3.6.1.4.1.412.2.4.30.1
This group provides the operational state, usage, and availabili y status,and administrative state indicators for specific Device Group instances
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFOperationalState  

dMTFOperationalStateState 1.3.6.1.4.1.412.2.4.30.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

operationalStateInstanceIndexAtt1 1.3.6.1.4.1.412.2.4.30.1.1
The Index into the Operational State table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

deviceGroupIndexAtt2-1 1.3.6.1.4.1.412.2.4.30.1.2
The group ID of the group referencing this instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operationalStatusAtt3 1.3.6.1.4.1.412.2.4.30.1.3
The operational status of the Device Group instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), enabled(3), disabled(4), notApplicable(5)  

usageStateAtt4 1.3.6.1.4.1.412.2.4.30.1.4
The usage state of the Device Group instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), idle(3), active(4), busy(5), notApplicable(6)  

availabilityStatusAtt5 1.3.6.1.4.1.412.2.4.30.1.5
The availability status of the Device Group instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), running(3), warning(4), inTest(5), notApplicable(6), powerOff(7), offLine(8), offDuty(9), degraded(10), notInstalled(11), installError(12), powerSave(13)  

administrativeStateAtt6 1.3.6.1.4.1.412.2.4.30.1.6
The administrative state of the Device Group instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), locked(3), unlocked(4), notApplicable(5), shuttingDown(6)  

fatalErrorCountAtt7 1.3.6.1.4.1.412.2.4.30.1.7
The accumulated Fatal or Non-recoverable error count for this Device Group instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiCounter  

majorErrorCountAtt8 1.3.6.1.4.1.412.2.4.30.1.8
The accumulated Major or Critical error count for this Device Group instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiCounter  

warningErrorCountAtt9 1.3.6.1.4.1.412.2.4.30.1.9
The accumulated Warning or Non-Critical error count for this Device Group instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiCounter  

currentErrorStatusAtt10 1.3.6.1.4.1.412.2.4.30.1.10
This attribute presents the current error status for this Device Group instance. The most critical error status in effect should be presented. I.e. if a part of the Device Group instance is 'Critical', while other status is 'Non-critical' then the status'Critical' should be reported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

devicePredictedFailureStatusAtt11 1.3.6.1.4.1.412.2.4.30.1.11
Enumeration describing the current Device Predicted Failure Status (e.g.: the S.M.A.R.T. status of the device).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), notSupportedByThisDevice(3), noFailurePredictedByTheDevice(4), deviceFailurePredictedByTheDevice(5), mediaFailurePredictedByTheDevice(6)  

dmiDynOid386845712 1.3.6.1.4.1.412.3.386845712
OBJECT IDENTIFIER    

dmiDynOid73111109 1.3.6.1.4.1.412.3.386845712.73111109
OBJECT IDENTIFIER    

dmiDynOid3922453424 1.3.6.1.4.1.412.3.386845712.73111109.0
OBJECT IDENTIFIER    

iNTELMIFTOMIBTable 1.3.6.1.4.1.412.3.386845712.73111109.0.1737102472
This group maps the DMI attributes to SNMP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SiNTELMIFTOMIB

iNTELMIFTOMIBEntry 1.3.6.1.4.1.412.3.386845712.73111109.0.1737102472.1
This group maps the DMI attributes to SNMP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SiNTELMIFTOMIB  

dellBaseBoardMIBAtt1 1.3.6.1.4.1.412.3.386845712.73111109.0.1737102472.1.1
The MIB name that defines this MIF
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

mIBOIDAtt2 1.3.6.1.4.1.412.3.386845712.73111109.0.1737102472.1.2
The MIB OID that corresponds to this MIF
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

disableTrapsAtt3 1.3.6.1.4.1.412.3.386845712.73111109.0.1737102472.1.3
Setting this value to 1 disables trap generation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dMTFPowerSupplyTable 1.3.6.1.4.1.412.2.4.16
This group defines various attributes for power supplies in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFPowerSupply

dMTFPowerSupplyEntry 1.3.6.1.4.1.412.2.4.16.1
This group defines various attributes for power supplies in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFPowerSupply  

dMTFPowerSupplyState 1.3.6.1.4.1.412.2.4.16.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

powerSupplyIndexAtt1 1.3.6.1.4.1.412.2.4.16.1.1
The index number of the current power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

fRUGroupIndexAtt2-1 1.3.6.1.4.1.412.2.4.16.1.2
If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operationalGroupIndexAtt3-1 1.3.6.1.4.1.412.2.4.16.1.3
The index into the Operational State table for this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

powerUnitIndexAtt4 1.3.6.1.4.1.412.2.4.16.1.4
This is the ID of the Power Unit (logical power supply) to which this Power Supply belongs. This value matches up with the Power Unit Table Index attribute defined in the Power Unit Global Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

powerSupplyTypeAtt5 1.3.6.1.4.1.412.2.4.16.1.5
This attribute describes the type of Power Supply, e.g. Linear, Switching, Battery, etc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), linear(3), switching(4), battery(5), uPS(6), converter(7), regulator(8)  

inputVoltageCapabilityDescriptionAtt6 1.3.6.1.4.1.412.2.4.16.1.6
An expanded description of the Input Voltage Capability for this Power Supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

range1InputVoltageLowAtt7 1.3.6.1.4.1.412.2.4.16.1.7
The low voltage of Input Voltage Range 1 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

range1InputVoltageHighAtt8 1.3.6.1.4.1.412.2.4.16.1.8
The high voltage of Input Voltage Range 1 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

range1VoltageProbeIndexAtt9 1.3.6.1.4.1.412.2.4.16.1.9
Index into the Voltage Probe table identifying the voltage probe monitoring this input range. 0 indicates no probe provided.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

range1ElectricalCurrentProbeIndexAtt10 1.3.6.1.4.1.412.2.4.16.1.10
Index into the Elelctrical Current Probe table identifying the Electrical current probe monitoring this input range. 0 indicates no probe provided.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

range2InputVoltageLowAtt11 1.3.6.1.4.1.412.2.4.16.1.11
The low voltage of Input Voltage Range 2 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

range2InputVoltageHighAtt12 1.3.6.1.4.1.412.2.4.16.1.12
The high voltage of Input Voltage Range 2 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

range2VoltageProbeIndexAtt13 1.3.6.1.4.1.412.2.4.16.1.13
Index into the Voltage Probe table identifying the voltage probe monitoring this input range. 0 indicates no probe provided.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

range2CurrentProbeIndexAtt14 1.3.6.1.4.1.412.2.4.16.1.14
Index into the Current Probe table identifying the current probe monitoring this input range. 0 indicates no probe provided.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

activeInputVoltageRangeAtt15 1.3.6.1.4.1.412.2.4.16.1.15
The value of this attribute indicates which input voltage range of this Power Supply is currently active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), range1(3), range2(4), both(5)  

inputVoltageRangeSwitchingAtt16 1.3.6.1.4.1.412.2.4.16.1.16
This attribute describes the kind of input voltage range switching that is implemented in this power supply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), manual(3), autoswitch(4), wideRange(5), notApplicable(6)  

range1InputFrequencyLowAtt17 1.3.6.1.4.1.412.2.4.16.1.17
The frequency at the low end of this power supply's Input Frequency Range 1. A value of zero implies DC. A value of 0x80000000 denotes 'unknown'
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

range1InputFrequencyHighAtt18 1.3.6.1.4.1.412.2.4.16.1.18
The frequency at the high end of this power supply's Input Frequency Range 1. A value of zero implies DC. A value of 0x80000000 denotes 'unknown'
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

range2InputFrequencyLowAtt19 1.3.6.1.4.1.412.2.4.16.1.19
The frequency at the low end of this power supply's Input Frequency Range 2. A value of zero implies DC. A value of 0x80000000 denotes 'unknown'
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

range2InputFrequencyHighAtt20 1.3.6.1.4.1.412.2.4.16.1.20
The frequency at the high end of this power supply's Input Frequency Range 2. A value of zero implies DC. A value of 0x80000000 denotes 'unknown'
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

totalOutputPowerAtt21 1.3.6.1.4.1.412.2.4.16.1.21
This attribute value represents the total output power of this power supply in milliWatts. 0x80000000 denotes 'unknown'
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dMTFPowerUnitGlobalTableTable 1.3.6.1.4.1.412.2.4.66
This global table describes all of the Power Units in this system component. The unique index of each Power Unit is the key into this table. A Power Unit is composed of potentially more than one Power Supply in a redundant configuration. Individual power supplies are described in the 'Power Supply' standard group. In that group, each individual power supply entry will point to a Power Unit in this table by using the index of the row in this table that describes the Power Unit. If a Power Unit is redunda
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFPowerUnitGlobalTable

dMTFPowerUnitGlobalTableEntry 1.3.6.1.4.1.412.2.4.66.1
This global table describes all of the Power Units in this system component. The unique index of each Power Unit is the key into this table. A Power Unit is composed of potentially more than one Power Supply in a redundant configuration. Individual power supplies are described in the 'Power Supply' standard group. In that group, each individual power supply entry will point to a Power Unit in this table by using the index of the row in this table that describes the Power Unit. If a Power Unit is redunda
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFPowerUnitGlobalTable  

dMTFPowerUnitGlobalTableState 1.3.6.1.4.1.412.2.4.66.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

powerUnitIndexAtt1 1.3.6.1.4.1.412.2.4.66.1.1
The unique index given to each Power Unit being described by this table. This unique index is the key into this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

powerUnitRedundancyStatusAtt2 1.3.6.1.4.1.412.2.4.66.1.2
Gives the redundancy status of the Power Unit. 'Fully Redundant means that all of the configured redundancy is still available; 'Degraded Redundancy' means that some failures have been experienced but some reduced amount of redundancy is still available; 'Redundancy Lost' means that a sufficie t number of failures have been experienced that no redundancy is available and the next failure experienced within the Power Unit will cause overall Power Unit failure.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), notApplicableUnitNotRedundant-1(3), offline(4), fullyRedundant-1(5), degradedRedundancy(6), redundancyLost(7)  

dMTFProcessorTable 1.3.6.1.4.1.412.2.4.5
This group defines the attributes for each and every processor installed in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFProcessor

dMTFProcessorEntry 1.3.6.1.4.1.412.2.4.5.1
This group defines the attributes for each and every processor installed in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFProcessor  

dMTFProcessorState 1.3.6.1.4.1.412.2.4.5.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

processorIndexAtt1 1.3.6.1.4.1.412.2.4.5.1.1
An index into the processor table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

processorTypeAtt2 1.3.6.1.4.1.412.2.4.5.1.2
The type of processor currently in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), centralProcessor(3), mathProcessor(4), dSPProcessor(5), videoProcessor(6)  

processorFamilyAtt3 1.3.6.1.4.1.412.2.4.5.1.3
The family of processors to which this processor belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), x8086(3), x80286(4), x80386(5), x80486(6), x8087(7), x80287(8), x80387(9), x80487(10), pentiumFamily(11), pentiumPro(12), pentiumII(13), pentiumMMX(14), celeron(15), xeon(16), m1Family(18), m2Family(19), k5Family(25), k6Family(26), powerPCFamily(32), powerPC601(33), powerPC603(34), powerPC603-1(35), powerPC604(36), alphaFamily(48), mIPSFamily(64), sPARCFamily(80), x68040(96), x68xxxFamily(97), x68000(98), x68010(99), x68020(100), x68030(101), hobbitFamily(112), weitek(128), pARISCFamily(144), v30Family(160)  

processorVersionInformationAtt4 1.3.6.1.4.1.412.2.4.5.1.4
The version number or string for this processor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

maximumSpeedAtt5 1.3.6.1.4.1.412.2.4.5.1.5
The maximum processor speed supported by this system in MHz.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

currentSpeedAtt6 1.3.6.1.4.1.412.2.4.5.1.6
The current speed (in MHz) of this processor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

processorUpgradeAtt7 1.3.6.1.4.1.412.2.4.5.1.7
The method by which this processor can be upgraded, if upgrades are supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), daughterBoard(3), zIFSocket(4), replacementPiggyBack(5), none(6), lIFSocket(7), slot1(8), slot2(9)  

fRUGroupIndexAtt8 1.3.6.1.4.1.412.2.4.5.1.8
If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operationalGroupIndexAtt9 1.3.6.1.4.1.412.2.4.5.1.9
The index into the Operational State Table for this device if applicable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

level1CacheIndexAtt10 1.3.6.1.4.1.412.2.4.5.1.10
An index into the System Cache table that identifies the entry that describes the L1 cache for this processor. If more than one processor points to the same cache entry this means they share that cache.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

level2CacheIndexAtt11 1.3.6.1.4.1.412.2.4.5.1.11
An index into the System Cache table that identifies the entry that describes the L2 cache for this processor If more than one processor points to the same cache entry this means they share that cache.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

level3CacheIndexAtt12 1.3.6.1.4.1.412.2.4.5.1.12
An index into the System Cache table that identifies the entry that describes the L3 cache for this processor. If more than one processor points to the same cache entry this means they share that cache.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dMTFSerialPortsTable 1.3.6.1.4.1.412.2.4.11
This group defines the attributes for serial ports in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFSerialPorts

dMTFSerialPortsEntry 1.3.6.1.4.1.412.2.4.11.1
This group defines the attributes for serial ports in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFSerialPorts  

dMTFSerialPortsState 1.3.6.1.4.1.412.2.4.11.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

serialPortIndexAtt1 1.3.6.1.4.1.412.2.4.11.1.1
An index into the serial ports table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

serialBaseIOAddressAtt2 1.3.6.1.4.1.412.2.4.11.1.2
Base I/O address for this serial port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Dmi-Integer64  

iRQUsedAtt3 1.3.6.1.4.1.412.2.4.11.1.3
IRQ number that is being used by this serial port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

logicalNameAtt4 1.3.6.1.4.1.412.2.4.11.1.4
The logical name of this serial port under this operating environment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

connectorTypeAtt5 1.3.6.1.4.1.412.2.4.11.1.5
The connector used to interface with the I/O device on this serial port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), dB9PinMale(3), dB9PinFemale(4), dB25PinMale(5), dB25PinFemale(6), rJ11(7), rJ45(8), proprietary(9), circularDIN8Male(10), circularDIN8Female(11), miniCentronicsType14(160), miniCentronicsType26(161)  

maximumSpeedAtt6 1.3.6.1.4.1.412.2.4.11.1.6
Maximum transfer speed of the device on this serial port in bits per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

serialPortCapabilitiesAtt7 1.3.6.1.4.1.412.2.4.11.1.7
The capabilities of this Serial port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), xTATCompatible(3), x16450Compatible(4), x16550Compatible(5), x16550ACompatible(6), x8251Compatible(160), x8251FIFOCompatible(161)  

operationalGroupIndexAtt8-1 1.3.6.1.4.1.412.2.4.11.1.8
The index into the Operational State Table for this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

serialPortSecuritySettingsAtt9 1.3.6.1.4.1.412.2.4.11.1.9
Attribute describing the current hardware security settings on this device
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), none(3), externalInterfaceLockedOut(4), externalInterfaceEnabled(5), bootBypass(6)  

dMTFSystemBIOSTable 1.3.6.1.4.1.412.2.4.3
This group defines the attributes for the System BIOS.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFSystemBIOS

dMTFSystemBIOSEntry 1.3.6.1.4.1.412.2.4.3.1
This group defines the attributes for the System BIOS.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFSystemBIOS  

dMTFSystemBIOSState 1.3.6.1.4.1.412.2.4.3.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

bIOSIndexAtt1 1.3.6.1.4.1.412.2.4.3.1.1
The index into the system BIOS table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

bIOSManufacturerAtt2 1.3.6.1.4.1.412.2.4.3.1.2
The name of the company that wrote this System BIOS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

bIOSVersionAtt3 1.3.6.1.4.1.412.2.4.3.1.3
The version number or version string of this BIOS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

bIOSROMSizeAtt4 1.3.6.1.4.1.412.2.4.3.1.4
The physical size of this BIOS ROM device in kilobytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

bIOSStartingAddressAtt5 1.3.6.1.4.1.412.2.4.3.1.5
The starting physical address for the memory which the BIOS occupies.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Dmi-Integer64  

bIOSEndingAddressAtt6 1.3.6.1.4.1.412.2.4.3.1.6
The ending physical address for the memory which the BIOS occupies.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Dmi-Integer64  

bIOSLoaderVersionAtt7 1.3.6.1.4.1.412.2.4.3.1.7
The BIOS flash loader version number or string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

bIOSReleaseDateAtt8 1.3.6.1.4.1.412.2.4.3.1.8
The BIOS release date.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Dmi-Date  

primaryBIOSAtt9 1.3.6.1.4.1.412.2.4.3.1.9
If true, this is the primary System BIOS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

dMTFSystemCacheTable 1.3.6.1.4.1.412.2.4.9
This group defines the attributes for different System Caches installed in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFSystemCache

dMTFSystemCacheEntry 1.3.6.1.4.1.412.2.4.9.1
This group defines the attributes for different System Caches installed in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFSystemCache  

dMTFSystemCacheState 1.3.6.1.4.1.412.2.4.9.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

systemCacheIndexAtt1 1.3.6.1.4.1.412.2.4.9.1.1
An index into the System Cache table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

systemCacheLevelAtt2 1.3.6.1.4.1.412.2.4.9.1.2
Is this the primary System Cache, or a subsidiary cache?
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), primary(3), secondary(4), tertiary(5)  

systemCacheSpeedAtt3 1.3.6.1.4.1.412.2.4.9.1.3
The speed of this System Cache module in nanoseconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

systemCacheSizeAtt4 1.3.6.1.4.1.412.2.4.9.1.4
The size of this System Cache module in kilobytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

systemCacheWritePolicyAtt5 1.3.6.1.4.1.412.2.4.9.1.5
Is this a write-back or a write-through cache?
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), writeBack(3), writeThrough(4), variesWithAddress(5)  

systemCacheErrorCorrectionAtt6 1.3.6.1.4.1.412.2.4.9.1.6
The error correction scheme supported by this cache component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), none(3), parity(4), singleBitECC(5), multiBitECC(6)  

fRUGroupIndexAtt7-1 1.3.6.1.4.1.412.2.4.9.1.7
If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operationalGroupIndexAtt8-2 1.3.6.1.4.1.412.2.4.9.1.8
The index into the Operational State Table for this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

systemCacheTypeAtt9 1.3.6.1.4.1.412.2.4.9.1.9
This defines the system cache type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), instruction(3), data(4), unified(5)  

lineSizeAtt10 1.3.6.1.4.1.412.2.4.9.1.10
The size, in bytes, of a single cache bucket or line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

volatilityAtt11 1.3.6.1.4.1.412.2.4.9.1.11
This defines the volatility of the cache.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), temporaryVolatile(3), volatile(4), permanentNonVolatile(5), temporaryNonVolatile(6), uPSNonVolatile(7)  

replacementPolicyAtt12 1.3.6.1.4.1.412.2.4.9.1.12
The algorithm used by the cache to determine which cache lines or buckets should be re-used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), leastRecentlyUsedLRU(3), firstInFirstOutFIFO(4), lastInFirstOutLIFO(5), leastFrequentlyUsedLFU(6), mostFrequentlyUsedMFU(7)  

readPolicyAtt13 1.3.6.1.4.1.412.2.4.9.1.13
The policy that shall be employed by the cache for handling read requests.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), read(3), readAhead(4), readAndReadAhead(5)  

flushTimerAtt14 1.3.6.1.4.1.412.2.4.9.1.14
The maximum amount of time, in seconds, dirty lines or buckets may remain in the cache before they are flushed. A value of zero indicated that a cache flush is not controlled by a flushing timer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

associativityAtt15 1.3.6.1.4.1.412.2.4.9.1.15
This defines the system cache associativity (direct-mapped, 2-way, 4-way, etc).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), directMapped(3), x2WaySetAssociative(4), x4WaySetAssociative(5), fullyAssociative(6)  

dMTFSystemHardwareSecurityTable 1.3.6.1.4.1.412.2.4.49
This group describes the system-wide hardware security settings.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFSystemHardwareSecurity

dMTFSystemHardwareSecurityEntry 1.3.6.1.4.1.412.2.4.49.1
This group describes the system-wide hardware security settings.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFSystemHardwareSecurity  

powerOnPasswordStatusAtt1 1.3.6.1.4.1.412.2.4.49.1.1
The current power-on password setting on the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), disabled(3), enabled(4), notImplemented(5)  

keyboardPasswordStatusAtt2 1.3.6.1.4.1.412.2.4.49.1.2
The current keyboard password setting on the system
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), disabled(3), enabled(4), notImplemented(5)  

administratorPasswordStatisAtt3 1.3.6.1.4.1.412.2.4.49.1.3
The current administrator password setting on the system. This password is required to make hardware configuration changes to the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), disabled(3), enabled(4), notImplemented(5)  

frontPanelResetStatusAtt4 1.3.6.1.4.1.412.2.4.49.1.4
The present status of the front panel reset button capability. If Enabled, the machine can be reset via the front panel reset button. If Disabled, the reset button, if available, is inoperative.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), disabled(3), enabled(4), notImplemented(5)  

dMTFSystemPowerControlsTable 1.3.6.1.4.1.412.2.4.51
This group defines attributes for controlling the main power supply to the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFSystemPowerControls

dMTFSystemPowerControlsEntry 1.3.6.1.4.1.412.2.4.51.1
This group defines attributes for controlling the main power supply to the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFSystemPowerControls  

powerControlRequestAtt1 1.3.6.1.4.1.412.2.4.51.1.1
Reading the value of this attribute gives the value of the last valid power control request that was written into it. Writing a valid value into it causes the appropriate power control action to be executed immediately. Writing an invalid or unimplemented value causes no change.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER other(1), unknown(2), powerOff(3), powerOffThenOnAgain(4), enterStandbyMode(5), enterSuspendMode(6), enterHibernationMode(7)  

timedPowerOnAvailableAtt2 1.3.6.1.4.1.412.2.4.51.1.2
Defines whether a timed power-on facility is available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1), unknown(2)  

timeToNextScheduledPowerOnAtt3 1.3.6.1.4.1.412.2.4.51.1.3
The number of seconds until the next timed power-on is scheduled to occur. A value of 0 means that if the system is powered off, no automatic timed poweron will occur. A value of 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

dMTFSystemResourceDMAInfoTable 1.3.6.1.4.1.412.2.4.42
This group presents additional information about DMA resources that have been defined in the System Resources table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFSystemResourceDMAInfo

dMTFSystemResourceDMAInfoEntry 1.3.6.1.4.1.412.2.4.42.1
This group presents additional information about DMA resources that have been defined in the System Resources table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFSystemResourceDMAInfo  

dMTFSystemResourceDMAInfoState 1.3.6.1.4.1.412.2.4.42.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

systemResourceDMAInfoIndexAtt1 1.3.6.1.4.1.412.2.4.42.1.1
A number the uniquely identifies rows in this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dMATransferWidthAtt2 1.3.6.1.4.1.412.2.4.42.1.2
Width of DMA transfers supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), x8Bit(3), x8And16Bit(4), x16Bit(5), x32Bit(6), x64Bit(7), x128Bit(8)  

dMAAddressSizeAtt3 1.3.6.1.4.1.412.2.4.42.1.3
The width of the DMA address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), x8Bit(3), x16Bit(5), x32Bit(6), x64Bit(7)  

dMAMaximumTransferSizeAtt4 1.3.6.1.4.1.412.2.4.42.1.4
The maximum number of bytes that can be transferred by this DMA Channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dMATransferPreferenceAtt5 1.3.6.1.4.1.412.2.4.42.1.5
DMA transfer type preference.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), x8Bit(3), x8And16Bit(4), x16Bit(5), x32Bit(6), x64Bit(7)  

busMasterAtt6 1.3.6.1.4.1.412.2.4.42.1.6
Indicates whether the device is using DMA is a bus master.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), logicalDeviceIsNotABusMaster(3), logicalDeviceIsABusMaster(4)  

byteModeAtt7 1.3.6.1.4.1.412.2.4.42.1.7
Indicates whether DMA may execute in 'count by byte' mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), dMAMayNotExecuteInCountByByteMode(3), dMAMayExecuteInCountByByteMode(4)  

wordModeAtt8 1.3.6.1.4.1.412.2.4.42.1.8
Indicates whether DMA may execute in 'count by word' mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), dMAMayNotExecuteInCountByWordMode(3), dMAMayExecuteInCountByWordMode(4)  

channelTimingAtt9 1.3.6.1.4.1.412.2.4.42.1.9
DMA channel speed support.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), iSACompatible(3), typeA(4), typeB(5), typeF(6)  

typeCTimingAtt10 1.3.6.1.4.1.412.2.4.42.1.10
Indicates whether C type (burst) timing is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), iSACompatible(3), cTypeTimingIsNotSupported(4), cTypeTimingIsSupported(5)  

dMTFSystemResourceDeviceInfoTable 1.3.6.1.4.1.412.2.4.38
This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFSystemResourceDeviceInfo

dMTFSystemResourceDeviceInfoEntry 1.3.6.1.4.1.412.2.4.38.1
This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFSystemResourceDeviceInfo  

dMTFSystemResourceDeviceInfoState 1.3.6.1.4.1.412.2.4.38.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

resourceUserAtt1 1.3.6.1.4.1.412.2.4.38.1.1
A number that uniquely identifies this device. This number may be derived from the 'device number' that is assigned by 'Plug N Play', or may be uniquely assigned by the component instrumentation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

deviceIDAtt2 1.3.6.1.4.1.412.2.4.38.1.2
Physical Device ID from Config manager info. Equal to the CISTPL-MANFID field for PCMCIA devices. 0xFFFFFFFF = Unknown
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

deviceSerialNumberAtt3 1.3.6.1.4.1.412.2.4.38.1.3
Device Serial Number from Config manager info. 0 = Undefined
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

logicalDeviceIDClassCodeAtt4 1.3.6.1.4.1.412.2.4.38.1.4
Logical device ID for PnP ISA devices, Class code for PCI devices, CISTPL-FUNCID for PCMCIA devices. 0xFFFFFFFF = Undefined, 0 = reserved
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

deviceFlagsAtt5 1.3.6.1.4.1.412.2.4.38.1.5
Device flags from config manager info. Bit 0: 1 = device has been initialized, Bit 1: 1 = device is enabled, Bit 2: 1 = device config has been locked, Bit 3: 1 = device has temporary config resources assigned, Bit 4: 1 = device is reconfigurable
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

deviceNumberAtt6 1.3.6.1.4.1.412.2.4.38.1.6
Device Number for PCI Devices, Logical Device number for PnP Devices. 0 otherwise.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

functionNumberAtt7 1.3.6.1.4.1.412.2.4.38.1.7
Function Number for PCI & EISA Devices. 0 otherwise.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

busTypeAtt8 1.3.6.1.4.1.412.2.4.38.1.8
Bus number (0-255) for PCI Devices, Slot number for EISA and PnP Devices, Card logical socket number for PCMCIA devices. Zero otherwise.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

cMReservedAtt9 1.3.6.1.4.1.412.2.4.38.1.9
Data from the Reserved field of the Configuration Manager bus access structure, or 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dMTFSystemResourceIOInfoTable 1.3.6.1.4.1.412.2.4.40
This group presents additional information about I/O resources that have been defined in the System Resources table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFSystemResourceIOInfo

dMTFSystemResourceIOInfoEntry 1.3.6.1.4.1.412.2.4.40.1
This group presents additional information about I/O resources that have been defined in the System Resources table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFSystemResourceIOInfo  

dMTFSystemResourceIOInfoState 1.3.6.1.4.1.412.2.4.40.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

systemResourceIOInfoIndexAtt1 1.3.6.1.4.1.412.2.4.40.1.1
A number the uniquely identifies rows in this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

iODecodeAtt2 1.3.6.1.4.1.412.2.4.40.1.2
Number of bits used for I/O decode
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), x10Bits(3), x16Bits(4)  

dMTFSystemResourceIRQInfoTable 1.3.6.1.4.1.412.2.4.41
This group presents additional information about I/O resources that have been defined in the System Resources table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFSystemResourceIRQInfo

dMTFSystemResourceIRQInfoEntry 1.3.6.1.4.1.412.2.4.41.1
This group presents additional information about I/O resources that have been defined in the System Resources table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFSystemResourceIRQInfo  

dMTFSystemResourceIRQInfoState 1.3.6.1.4.1.412.2.4.41.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

systemResourceIRQInfoIndexAtt1 1.3.6.1.4.1.412.2.4.41.1.1
A number the uniquely identifies rows in this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

triggerTypeAtt2 1.3.6.1.4.1.412.2.4.41.1.2
The trigger type for this interrupt.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), level(3), edge(4)  

triggerLevelAtt3 1.3.6.1.4.1.412.2.4.41.1.3
The trigger level for this interrupt.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), activeLow(3), activeHigh(4)  

dMTFSystemResourceMemoryInfoTable 1.3.6.1.4.1.412.2.4.39
This group presents additional information about memory resource that have been defined in the System Resources table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFSystemResourceMemoryInfo

dMTFSystemResourceMemoryInfoEntry 1.3.6.1.4.1.412.2.4.39.1
This group presents additional information about memory resource that have been defined in the System Resources table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFSystemResourceMemoryInfo  

dMTFSystemResourceMemoryInfoState 1.3.6.1.4.1.412.2.4.39.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

systemResourceMemoryInfoIndexAtt1 1.3.6.1.4.1.412.2.4.39.1.1
A number the uniquely identifies rows in this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

iSAPCMCIARangeDescriptorAtt2 1.3.6.1.4.1.412.2.4.39.1.2
For PnP ISA/PCMCIA memory range descriptor compatibility.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), x8BitMemoryOnly(3), x16BitMemoryOnly(4), x8And16BitMemorySupported(5), x32BitMemoryOnly(6)  

eISARangeDescriptorAtt3 1.3.6.1.4.1.412.2.4.39.1.3
For PnP EISA memory range descriptor compatibility.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), x8BitMemoryOnly(3), x16BitMemoryOnly(4), x8And16BitMemorySupported(5), x32BitMemoryOnly(6)  

decodeSupportAtt4 1.3.6.1.4.1.412.2.4.39.1.4
For PnP memory range descriptor compatibility.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), decodeSupportsHighAddress(3), decodeSupportsRangeLength(4)  

cacheableAtt5 1.3.6.1.4.1.412.2.4.39.1.5
Indicates whether it is allowable for this memory range to be cached or not.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1), unknown(2)  

cacheTypeAtt6 1.3.6.1.4.1.412.2.4.39.1.6
Indicates Cache Type that is compatible with this resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), writeBack-1(3), writeThrough-1(4)  

readWriteAtt7 1.3.6.1.4.1.412.2.4.39.1.7
Indicates the read-write accessibility of this memory resource.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), rOMReadOnly(3), rAMReadwrite(4)  

dMTFSystemResources2Table 1.3.6.1.4.1.412.2.4.37
This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFSystemResources2

dMTFSystemResources2Entry 1.3.6.1.4.1.412.2.4.37.1
This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFSystemResources2  

dMTFSystemResources2State 1.3.6.1.4.1.412.2.4.37.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

systemResourcesIndexAtt1 1.3.6.1.4.1.412.2.4.37.1.1
A number that uniquely identifies the rows in this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

resourceUserAtt2 1.3.6.1.4.1.412.2.4.37.1.2
A unique number for each different 'resource user' that has resources specified in this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

resourceSetAtt3 1.3.6.1.4.1.412.2.4.37.1.3
A number used as the ID of a set of Memory, I/O, DMA and/or INT resources for the resource user.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

resourceAssignmentAtt4 1.3.6.1.4.1.412.2.4.37.1.4
Describes the state of the assignment of this set of resources. (Note: This value must be the same for all resources within a given set.)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), allocated(3), assignable(4), temporaryAssignment(5)  

resourceTypeAtt5 1.3.6.1.4.1.412.2.4.37.1.5
The type of resource described by this row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), memory(3), iO(4), iRQ(5), dMA(6)  

resourceNumberAtt6 1.3.6.1.4.1.412.2.4.37.1.6
DMA or IRQ number - 0 for Memory and I/O ranges. This is the interrupt or DMA number relative to the bus that the interrupt is sourced from.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

resourceInfoIDAtt7 1.3.6.1.4.1.412.2.4.37.1.7
ID of the row in the 'Info' table for this type of system resource. E.g. if this Resource Type is 'I/O' then this would be an index into the 'System Resource I/O Info' table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

startAddressAtt8 1.3.6.1.4.1.412.2.4.37.1.8
Starting physical address for this memory range, or the minimum base address if this attribute is being used to describe a programmable range. 0 for IRQ and DMA resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Dmi-Integer64  

endAddressAtt9 1.3.6.1.4.1.412.2.4.37.1.9
Ending physical address (address of last byte) for this memory range, or the maximum configurable base address if this attribute is being used to describe a programmable range. 0 for IRQ and DMA resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Dmi-Integer64  

resourceSizeAtt10 1.3.6.1.4.1.412.2.4.37.1.10
jNumber of consecutive bytes that a memory or I/O resource consumes. 0 for IRQ and DMA resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

baseAlignmentAtt11 1.3.6.1.4.1.412.2.4.37.1.11
Alignment of Start Address, in bytes. Indicates the granularity of the increments in which a programmable range can be set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

shareableAtt12 1.3.6.1.4.1.412.2.4.37.1.12
Indicates whether the resource is shareable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1), unknown(2)  

sharedAtt13 1.3.6.1.4.1.412.2.4.37.1.13
Indicates whether this resource, or a portion of this resource, is shared with another device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1), unknown(2)  

dMTFSystemSlotsTable 1.3.6.1.4.1.412.2.4.18
This group defines the attributes for the different system expansion slots supported in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFSystemSlots

dMTFSystemSlotsEntry 1.3.6.1.4.1.412.2.4.18.1
This group defines the attributes for the different system expansion slots supported in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFSystemSlots  

dMTFSystemSlotsState 1.3.6.1.4.1.412.2.4.18.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

slotIndexAtt1 1.3.6.1.4.1.412.2.4.18.1.1
An index into the system slot table. This is the hardware ID number for each expansion slot, whether it is occupied or not (starting with 1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

slotTypeAtt2 1.3.6.1.4.1.412.2.4.18.1.2
The bus type supported in this slot. This is a bit field with the following definitions: Bit 0 (2^0), if 1, it is a long-length card; if 0, it is a short-length card, Bit 1 (2^1) if set, indicates ISA, Bit 2 (2^2) indicates EISA, Bit 3 (2^3) indicates MCA, Bit 4 (2^4) indicates PCI, Bit 5 (2^5) indicates VL, Bit 6 (2^6) indicates PCMCIA, Bit 7 (2^7) refers to NuBus, Bit 8 (2^8) indicates PC-98/C20, Bit 9 (2^9) indicates PC-98/C24, Bit 10 (2^10) indicates PC-98/E, Bit 11 (2^
Status: mandatory Access: read-only
OBJECT-TYPE    
  Dmi-Integer64  

slotWidthAtt3 1.3.6.1.4.1.412.2.4.18.1.3
The maximum bus width of cards accepted in this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), x8BitCard(3), x16BitCard(4), x32BitCard(5), x64BitCard(6), x128BitCard(7)  

currentUsageAtt4 1.3.6.1.4.1.412.2.4.18.1.4
Is this slot is currently in use?
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), available(3), inUse(4)  

slotDescriptionAtt5 1.3.6.1.4.1.412.2.4.18.1.5
The card currently occupying this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

slotCategoryAtt6 1.3.6.1.4.1.412.2.4.18.1.6
The word 'slot' is used to refer to bus slots. The last case (motherboard) refers to situations where a functional element is integrated onto, say, a motherboard and connects to a bus without a connector. It still takes up an expansion site on the bus but this is termed a 'virtual slot' as opposed to a physical slot (see the attribute 'Virtual Slot'). Virtual slots are in effect permanently occupied expansion sites. This attribute establishes which category of physical slot this table entry is defining.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), busConnector(3), pCMCIASlot(4), motherboard(5)  

virtualSlotAtt7 1.3.6.1.4.1.412.2.4.18.1.7
This attribute indicates whether this is a 'virtual slot' or not. A 'virtual slot' is an expansion site that is permanently occupied because of the level of integration of an expandable component. An example of a virtual slot is an I/O bus position taken up by a LAN controller that is integrated onto a motherboard. A slot with the 'Slot Category' of Motherboard is typically a Virtual Slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1), unknown(2)  

resourceUserIDAtt8 1.3.6.1.4.1.412.2.4.18.1.8
Value used to locate the rows in the System Resources 2 table for the resources associated with this slot or expansion site. 0 = 'unspecified .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dMTFTemperatureProbeTable 1.3.6.1.4.1.412.2.4.54
This group defines the attributes for the temperature probes in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFTemperatureProbe

dMTFTemperatureProbeEntry 1.3.6.1.4.1.412.2.4.54.1
This group defines the attributes for the temperature probes in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFTemperatureProbe  

dMTFTemperatureProbeState 1.3.6.1.4.1.412.2.4.54.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

temperatureProbeTableIndexAtt1 1.3.6.1.4.1.412.2.4.54.1.1
Index into this temperature probe table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

temperatureProbeLocationAtt2 1.3.6.1.4.1.412.2.4.54.1.2
Identifies the physical location of the temperature probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), processor(3), disk(4), peripheralBay(5), sMBMaster(6), motherboard(7), memoryModule(8), processorModule(9), powerUnit(10), addInCard(11)  

temperatureProbeDescriptionAtt3 1.3.6.1.4.1.412.2.4.54.1.3
Additional descriptive information about the temperature probe or probe's location.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

temperatureStatusAtt4 1.3.6.1.4.1.412.2.4.54.1.4
Defines the status of the temperature monitored by this temperat re probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

temperatureProbeTemperatureReadingAtt5 1.3.6.1.4.1.412.2.4.54.1.5
The present temperature reading of this temperature probe in 1/10th degrees C. 0x8000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

monitoredTemperatureNominalReadingAtt6 1.3.6.1.4.1.412.2.4.54.1.6
The nominal temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

monitoredTemperatureNormalMaximumAtt7 1.3.6.1.4.1.412.2.4.54.1.7
The normal maximum temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

monitoredTemperatureNormalMinimumAtt8 1.3.6.1.4.1.412.2.4.54.1.8
The normal minimum temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

temperatureProbeMaximumAtt9 1.3.6.1.4.1.412.2.4.54.1.9
The maximum temperature reading specified to be readable by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

temperatureProbeMinimumAtt10 1.3.6.1.4.1.412.2.4.54.1.10
The minimum temperature reading specified to be readable by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

temperatureReadingLowerThresholdNonCriticalAtt11 1.3.6.1.4.1.412.2.4.54.1.11
The lower non-critical threshold for the temperature reading set by the user, in 1/10th degrees C. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

temperatureReadingUpperThresholdNonCriticalAtt12 1.3.6.1.4.1.412.2.4.54.1.12
The upper non-critical threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

temperatureReadingLowerThresholdCriticalAtt13 1.3.6.1.4.1.412.2.4.54.1.13
The lower critical threshold for the temperature probe, in 1/10 degrees C. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

temperatureReadingUpperThresholdCriticalAtt14 1.3.6.1.4.1.412.2.4.54.1.14
The upper critical threshold for the temperature probe, in /10th degrees C. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

temperatureReadingLowerThresholdNonRecoverableAtt15 1.3.6.1.4.1.412.2.4.54.1.15
The lower non-recoverable threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

temperatureReadingUpperThresholdNonRecoverableAtt16 1.3.6.1.4.1.412.2.4.54.1.16
The upper non-recoverable threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

temperatureProbeResolutionAtt17 1.3.6.1.4.1.412.2.4.54.1.17
The resolution for the reading from this temperature probe, in tenths of 1/10th degrees C. '0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

temperatureProbeToleranceAtt18 1.3.6.1.4.1.412.2.4.54.1.18
The tolerance for the reading from this temperature probe, in plus/minus 1/10 degrees C. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

temperatureProbeAccuracyAtt19 1.3.6.1.4.1.412.2.4.54.1.19
The accuracy for the reading from this temperature probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown' or'unsupport d'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

fRUGroupIndexAtt20-1 1.3.6.1.4.1.412.2.4.54.1.20
Index into the FRU table. A value of -1 indicates that this device is not an FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operationalGroupIndexAtt21-1 1.3.6.1.4.1.412.2.4.54.1.21
Index into the Operational State table
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dMTFVoltageProbeTable 1.3.6.1.4.1.412.2.4.53
This group defines the attributes for the voltage probes in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFVoltageProbe

dMTFVoltageProbeEntry 1.3.6.1.4.1.412.2.4.53.1
This group defines the attributes for the voltage probes in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFVoltageProbe  

dMTFVoltageProbeState 1.3.6.1.4.1.412.2.4.53.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

voltageProbeIndexAtt1 1.3.6.1.4.1.412.2.4.53.1.1
Index into this voltage probe table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

voltageProbeLocationAtt2 1.3.6.1.4.1.412.2.4.53.1.2
Identifies the physical location of the voltage probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), processor(3), disk(4), peripheralBay(5), systemManagementModule(6), motherboard(7), memoryModule(8), processorModule(9), powerUnit(10), addInCard(11)  

voltageProbeDescriptionAtt3 1.3.6.1.4.1.412.2.4.53.1.3
Additional descriptive information about the voltage probe or probe's location.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

voltageStatusAtt4 1.3.6.1.4.1.412.2.4.53.1.4
Defines the status of the voltage monitored by this voltage probe.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6)  

voltageProbeVoltageLevelAtt5 1.3.6.1.4.1.412.2.4.53.1.5
The current voltage level of this voltage probe in millivolts. 0x8000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

monitoredVoltageNominalLevelAtt6 1.3.6.1.4.1.412.2.4.53.1.6
The nominal voltage level of the voltage monitored by this probe in millivolts. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

monitoredVoltageNormalMaximumAtt7 1.3.6.1.4.1.412.2.4.53.1.7
The normal maximum voltage level of the voltage monitored by this probe in millivolts. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

monitoredVoltageNormalMinimumAtt8 1.3.6.1.4.1.412.2.4.53.1.8
The normal minimum voltage level of the voltage monitored by this probe in millivolts. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

voltageProbeMaximumAtt9 1.3.6.1.4.1.412.2.4.53.1.9
The maximum voltage level specified to be readable by this probe in millivolts. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

voltageProbeMinimumAtt10 1.3.6.1.4.1.412.2.4.53.1.10
The minimum voltage level specified to be readable by this probe in millivolts. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

voltageLevelLowerThresholdNonCriticalAtt11 1.3.6.1.4.1.412.2.4.53.1.11
The lower non-critical threshold for the voltage level set by the user, in millivolts. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

voltageLevelUpperThresholdNonCriticalAtt12 1.3.6.1.4.1.412.2.4.53.1.12
The upper non-critical threshold for the voltage probe, in millivolts. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

voltageLevelLowerThresholdCriticalAtt13 1.3.6.1.4.1.412.2.4.53.1.13
The lower critical threshold for the voltage probe, in millivolt . 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

voltageLevelUpperThresholdCriticalAtt14 1.3.6.1.4.1.412.2.4.53.1.14
The upper critical threshold for the voltage probe, in millivolt . 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

voltageLevelLowerThresholdNonRecoverableAtt15 1.3.6.1.4.1.412.2.4.53.1.15
The lower non-recoverable threshold for the voltage probe, in millivolts. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

voltageLevelUpperThresholdNonRecoverableAtt16 1.3.6.1.4.1.412.2.4.53.1.16
The upper non-recoverable threshold for the voltage probe, in millivolts. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

voltageProbeResolutionAtt17 1.3.6.1.4.1.412.2.4.53.1.17
The resolution for the reading from this voltage probe, in tenths of millivolts. '0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

voltageProbeToleranceAtt18 1.3.6.1.4.1.412.2.4.53.1.18
The tolerance for the reading from this voltage probe, in plus/minus millivolts. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

voltageProbeAccuracyAtt19 1.3.6.1.4.1.412.2.4.53.1.19
The accuracy for the reading from this voltage probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

fRUGroupIndexAtt20-2 1.3.6.1.4.1.412.2.4.53.1.20
Index into the FRU table
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operationalGroupIndexAtt21-2 1.3.6.1.4.1.412.2.4.53.1.21
Index into the Operational State table
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dMTFPhysicalMemoryArrayTable 1.3.6.1.4.1.412.2.4.33
This group represents an array of physical memory as a collectio of one or more Memory Devices associated in sets and partitions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFPhysicalMemoryArray

dMTFPhysicalMemoryArrayEntry 1.3.6.1.4.1.412.2.4.33.1
This group represents an array of physical memory as a collectio of one or more Memory Devices associated in sets and partitions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFPhysicalMemoryArray  

dMTFPhysicalMemoryArrayState 1.3.6.1.4.1.412.2.4.33.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

memoryArrayTableIndexAtt1 1.3.6.1.4.1.412.2.4.33.1.1
A unique number that identifies this row.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

memoryArrayLocationAtt2 1.3.6.1.4.1.412.2.4.33.1.2
The physical location of the Memory Array, whether on the system board or an add-on board.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), systemBoardOrMotherboard(3), iSAAddOnCard(4), eISAAddOnCard(5), pCIAddOnCard(6), mCAAddOnCard(7), pCMCIAAddOnCard(8), proprietaryAddOnCard(9), nuBus(16), pC98C20AddOnCard(160), pC98C24AddOnCard(161), pC98EAddOnCard(162), pC98LocalBusAddOnCard(163), pC98CardSlotAddOnCard(164)  

memoryArrayUseAtt3 1.3.6.1.4.1.412.2.4.33.1.3
What this Memory Array is used for.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), systemMemory(3), videoMemory(4), flashMemory(5), nonVolatileRAM(6), cacheMemory(7)  

maximumMemoryCapacityAtt4 1.3.6.1.4.1.412.2.4.33.1.4
The maximum memory capacity, in kilobytes, on this array. 0x80000000denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

numberOfMemoryDeviceSocketsAtt5 1.3.6.1.4.1.412.2.4.33.1.5
The number of SIMM slots or sockets available for Memory Devices in this array. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

numberOfMemoryDeviceSocketsUsedAtt6 1.3.6.1.4.1.412.2.4.33.1.6
The number of SIMM slots or sockets in use for Memory Devices in this array. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

memoryErrorCorrectionAtt7 1.3.6.1.4.1.412.2.4.33.1.7
The main hardware error correction or detection method supported by this Memory Array.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), none(3), parity(4), singleBitECC(5), multiBitECC(6), cRC(7)  

arrayErrorTypeAtt8 1.3.6.1.4.1.412.2.4.33.1.8
The type of error that is associated with the current status reported in Operational State for this Memory Array.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), oK(3), badRead(4), parityError(5), singleBitError(6), doubleBitError(7), multiBitError(8), nibbleError(9), checksumError(10), cRCError(11), correctedSingleBitError(12), correctedError(13), uncorrectableError(14)  

lastErrorUpdateAtt9 1.3.6.1.4.1.412.2.4.33.1.9
System state during which last error status was collected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), noUpdateSinceLastInstrumentationStart(3), updatedFromInformationObtainedPriorToInstrumentati(4), updatedDuringInstrumentationRunTime(5)  

errorOperationAtt10 1.3.6.1.4.1.412.2.4.33.1.10
The memory access operation that caused the current error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), read(3), write(4), partialWrite(5)  

errorDataSizeAtt11 1.3.6.1.4.1.412.2.4.33.1.11
The size of the data transfer that caused the error, in bits. Zero indicates no error, 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

errorDataAtt12 1.3.6.1.4.1.412.2.4.33.1.12
Data captured during the erroneous Memory Array access. The data occupy the first n bytes of the octet string required to hold 'Error Data Size' bits of the data. Data are stored least-significant byte first.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiOctetstring  

vendorSyndromeAtt13 1.3.6.1.4.1.412.2.4.33.1.13
Vendor-specific syndrome or CRC data associated with the erroneous access.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiOctetstring  

errorAddressAtt14 1.3.6.1.4.1.412.2.4.33.1.14
Physical address of the error based on the addressing of the bus that the Memory Array is connected to. 0x8000 0000 0000 0000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Dmi-Integer64  

errorResolutionAtt15 1.3.6.1.4.1.412.2.4.33.1.15
Range in bytes that the error can be determined to be within, when an Error Address is given. 0x80000000 denotes 'unknown'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

fRUGroupIndexAtt16 1.3.6.1.4.1.412.2.4.33.1.16
If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operationalGroupIndexAtt17 1.3.6.1.4.1.412.2.4.33.1.17
The index into the Operational State Table for this Memory Array. The Operational State row is used to hold the overall error count and error status for this array.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

dMTFParallelPortsTable 1.3.6.1.4.1.412.2.4.10
This group defines the attributes for parallel ports in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdMTFParallelPorts

dMTFParallelPortsEntry 1.3.6.1.4.1.412.2.4.10.1
This group defines the attributes for parallel ports in this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdMTFParallelPorts  

dMTFParallelPortsState 1.3.6.1.4.1.412.2.4.10.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

parallelPortIndexAtt1 1.3.6.1.4.1.412.2.4.10.1.1
An index into the parallel ports table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

parallelBaseIOAddressAtt2 1.3.6.1.4.1.412.2.4.10.1.2
Base I/O address for this parallel port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Dmi-Integer64  

iRQUsedAtt3-1 1.3.6.1.4.1.412.2.4.10.1.3
IRQ number that is being used by this parallel port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

logicalNameAtt4-1 1.3.6.1.4.1.412.2.4.10.1.4
The logical name of the I/O device on this parallel port, under this operating environment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

connectorTypeAtt5-1 1.3.6.1.4.1.412.2.4.10.1.5
The connector used to interface with the I/O device on this parallel port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), dB25Female(3), dB25Male(4), centronics(5), miniCentronics(6), proprietary(7), centronics14(160), dB36Female(161), miniCentronics20(162)  

connectorPinoutAtt6 1.3.6.1.4.1.412.2.4.10.1.6
The pinout used by the I/O device on this parallel port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), xTAT(3), pS2(4), iEEE1284(5), proprietary(6), pC98(160), pC98Hireso(161), pCH98(162), pC98Note(163), pC98Full(164)  

dMASupportAtt7 1.3.6.1.4.1.412.2.4.10.1.7
If true, DMA is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

parallelPortCapabilitiesAtt8 1.3.6.1.4.1.412.2.4.10.1.8
Capabilities of this parallel port. This is a bit field mask with the bits defined as follows: Bit 0 (2^0) set = XT/AT compatible, Bit 1 (2^1) set = PS/2 compatible, Bit 2 (2^2) set = ECP, Bit 3 (2^3) set = EPP, Bit 4 (2^4) set = PC-98, Bit 5 (2^5) set = PC-98-Hireso, Bit 6 (2^6) set = PC-H98
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

operationalGroupIndexAtt9-1 1.3.6.1.4.1.412.2.4.10.1.9
The index into the Operational State Table for this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

parallelPortSecuritySettingsAtt10 1.3.6.1.4.1.412.2.4.10.1.10
Attribute describing the current hardware security settings on this device
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), none(3), externalInterfaceLockedOut(4), externalInterfaceEnabled(5), bootBypass(6)  

dELLSystemsManagementSoftwareTable 1.3.6.1.4.1.674.10891.400
This group defines the attributes of the management software which instruments this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdELLSystemsManagementSoftware

dELLSystemsManagementSoftwareEntry 1.3.6.1.4.1.674.10891.400.1
This group defines the attributes of the management software which instruments this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdELLSystemsManagementSoftware  

productAtt1 1.3.6.1.4.1.674.10891.400.1.1
The name of the Systems Management Software product that instruments this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

versionAtt2 1.3.6.1.4.1.674.10891.400.1.2
The version for the Systems Management Software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

buildNumberAtt3 1.3.6.1.4.1.674.10891.400.1.3
The build number of this Systems Management Software product.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

descriptionAtt4 1.3.6.1.4.1.674.10891.400.1.4
A description of this Systems Management Software product.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

supportedProtocolsAtt5 1.3.6.1.4.1.674.10891.400.1.5
This is a bit map field which is used to list protocols which can be used to access the systems management information. This is a bit map where a value of 1 indicates that the protocol is supported. Values are based on the Protocol-Type enum. Mappers will be listed in this list, but not as preferred protocols.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

preferredProtocolAtt6 1.3.6.1.4.1.674.10891.400.1.6
This is a field which is used to indicate which protocol is the preferred method for gathering management information. This is value is set by the instrumentation based on performance and features of protocols available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER sNMP(1), dMIRPC(2), cIMOM(4)  

dMIRPCTypesAtt7 1.3.6.1.4.1.674.10891.400.1.7
This field describes the RPC type, if any, for instance DCE:ncac -ip-tcp or ONC:tcpip. A semi-colon may seperate multiple supports, such as DCE:ncasn-ip-tcp;ONC:tcpip. This field should be empty if DMI RPC is not supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiDisplaystring  

dELLSystemsSummaryInformationTable 1.3.6.1.4.1.674.10891.402
This group provides minimal summarization information about a system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdELLSystemsSummaryInformation

dELLSystemsSummaryInformationEntry 1.3.6.1.4.1.674.10891.402.1
This group provides minimal summarization information about a system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdELLSystemsSummaryInformation  

operatingSystemAtt1 1.3.6.1.4.1.674.10891.402.1.1
This is the operating system which is installed and running on the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), windowsNT(3), windows9x(4), iBMOS2(5), sCOUNIX(6), netware(7)  

systemClassAtt2 1.3.6.1.4.1.674.10891.402.1.2
This is the system type which is installed and running the instrumentation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), unknown(2), workstation(3), server(4), desktop(5), portable(6), netPC(7)  

dellMemoryPrefailureTable 1.3.6.1.4.1.674.10891.403
This group provides information about a memory prefailure condition described in the operational state of the memory device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SdellMemoryPrefailure

dellMemoryPrefailureEntry 1.3.6.1.4.1.674.10891.403.1
This group provides information about a memory prefailure condition described in the operational state of the memory device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SdellMemoryPrefailure  

dellMemoryPrefailureState 1.3.6.1.4.1.674.10891.403.1.0
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

memoryDeviceIndexAtt1 1.3.6.1.4.1.674.10891.403.1.1
This is the index into the memory device table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DmiInteger  

resetMemoryDeviceErrorCountAndPrefailureStatusAtt2 1.3.6.1.4.1.674.10891.403.1.2
Writing a non-zero value to this field will reset the memory device prefailure status and error count.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DmiInteger  

dellTemperatureProbeEvSys 1.3.6.1.4.1.674.10891.300.6
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dellTemperatureProbeEvSub 1.3.6.1.4.1.674.10891.300.7
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dellTemperatureProbeEvSol 1.3.6.1.4.1.674.10891.300.8
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(1), unknown(2)  

dellTemperatureProbeEvt1 1
coolingDeviceStatusChange
TRAP-TYPE    

dellFanSensorEvSys 1.3.6.1.4.1.674.10891.301.6
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dellFanSensorEvSub 1.3.6.1.4.1.674.10891.301.7
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dellFanSensorEvSol 1.3.6.1.4.1.674.10891.301.8
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(1), unknown(2)  

dellFanSensorEvt1 1
coolingDeviceStatusChange
TRAP-TYPE    

dellVoltageProbeEvSys 1.3.6.1.4.1.674.10891.302.6
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dellVoltageProbeEvSub 1.3.6.1.4.1.674.10891.302.7
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dellVoltageProbeEvSol 1.3.6.1.4.1.674.10891.302.8
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(1), unknown(2)  

dellVoltageProbeEvt1 1
powerSupplyStatusChange
TRAP-TYPE    

dellCurrentProbeEvSys 1.3.6.1.4.1.674.10891.303.6
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dellCurrentProbeEvSub 1.3.6.1.4.1.674.10891.303.7
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dellCurrentProbeEvSol 1.3.6.1.4.1.674.10891.303.8
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(1), unknown(2)  

dellCurrentProbeEvt1 1
powerSupplyStatusChange
TRAP-TYPE    

dellGlobalPowerUnitEvSys 1.3.6.1.4.1.674.10891.305.6
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dellGlobalPowerUnitEvSub 1.3.6.1.4.1.674.10891.305.7
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dellGlobalPowerUnitEvSol 1.3.6.1.4.1.674.10891.305.8
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(1), unknown(2)  

dellGlobalPowerUnitEvt1 1
powerSupplyRedundancyChange
TRAP-TYPE    

dellGlobalPowerUnitEvt2 2
powerSupplyStatusChange
TRAP-TYPE    

dellSystemChassisExtensionEvSys 1.3.6.1.4.1.674.10891.306.6
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dellSystemChassisExtensionEvSub 1.3.6.1.4.1.674.10891.306.7
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dellSystemChassisExtensionEvSol 1.3.6.1.4.1.674.10891.306.8
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(1), unknown(2)  

dellSystemChassisExtensionEvt1 1
memoryECCError
TRAP-TYPE    

dMTFPhysicalContainerGlobalTableEvSys 1.3.6.1.4.1.412.2.4.63.6
The major functional aspect of the product causing the fault.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dMTFPhysicalContainerGlobalTableEvSub 1.3.6.1.4.1.412.2.4.63.7
The minor functional aspect of the product causing the fault.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dMTFPhysicalContainerGlobalTableEvt1 1
securitySettingsChange
TRAP-TYPE    

dMTFPhysicalContainerGlobalTableEvt2 2
powerSupplyStatusChange
TRAP-TYPE    

dMTFPhysicalContainerGlobalTableEvt3 3
coolingDeviceStatusChange
TRAP-TYPE    

dMTFPhysicalContainerGlobalTableEvt4 4
physicalDeviceStatusChange
TRAP-TYPE    

dMTFPhysicalContainerGlobalTableEvt5 5
logicalDeviceStatusChange
TRAP-TYPE    

dMTFPhysicalContainerGlobalTableEvt6 6
containerSecurityBreach
TRAP-TYPE    

dMTFPhysicalContainerGlobalTableEvt7 7
configurationError
TRAP-TYPE    

dellSystemResetEvSys 1.3.6.1.4.1.674.10891.312.6
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dellSystemResetEvSub 1.3.6.1.4.1.674.10891.312.7
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dellSystemResetEvSol 1.3.6.1.4.1.674.10891.312.8
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(1), unknown(2)  

dellSystemResetEvt1 1
systemUp
TRAP-TYPE    

dMTFCoolingDeviceEvSys 1.3.6.1.4.1.412.2.4.17.6
The major functional aspect of the product causing the fault.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dMTFCoolingDeviceEvSub 1.3.6.1.4.1.412.2.4.17.7
The minor functional aspect of the product causing the fault.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dMTFCoolingDeviceEvt1 1
coolingDeviceStatusChange
TRAP-TYPE    

dMTFCoolingDeviceEvt2 2
temperatureFault
TRAP-TYPE    

dMTFElectricalCurrentProbeEvSys 1.3.6.1.4.1.412.2.4.55.6
The major functional aspect of the product causing the fault.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dMTFElectricalCurrentProbeEvSub 1.3.6.1.4.1.412.2.4.55.7
The minor functional aspect of the product causing the fault.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dMTFElectricalCurrentProbeEvt1 1
powerSupplyStatusChange
TRAP-TYPE    

dMTFElectricalCurrentProbeEvt2 2
coolingDeviceStatusChange
TRAP-TYPE    

dMTFPhysicalMemoryArrayEvSys 1.3.6.1.4.1.412.2.4.33.6
The major functional aspect of the product causing the fault.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dMTFPhysicalMemoryArrayEvSub 1.3.6.1.4.1.412.2.4.33.7
The minor functional aspect of the product causing the fault.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dMTFPhysicalMemoryArrayEvt1 1
memoryError
TRAP-TYPE    

dMTFPhysicalMemoryArrayEvt2 2
initializationFailure
TRAP-TYPE    

dMTFPowerSupplyEvSys 1.3.6.1.4.1.412.2.4.16.6
The major functional aspect of the product causing the fault.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dMTFPowerSupplyEvSub 1.3.6.1.4.1.412.2.4.16.7
The minor functional aspect of the product causing the fault.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dMTFPowerSupplyEvt1 1
powerSupplyStatusChange
TRAP-TYPE    

dMTFPowerSupplyEvt2 2
powerControlRequest
TRAP-TYPE    

dMTFTemperatureProbeEvSys 1.3.6.1.4.1.412.2.4.54.6
The major functional aspect of the product causing the fault.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dMTFTemperatureProbeEvSub 1.3.6.1.4.1.412.2.4.54.7
The minor functional aspect of the product causing the fault.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dMTFTemperatureProbeEvt1 1
coolingDeviceStatusChange
TRAP-TYPE    

dMTFVoltageProbeEvSys 1.3.6.1.4.1.412.2.4.53.6
The major functional aspect of the product causing the fault.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dMTFVoltageProbeEvSub 1.3.6.1.4.1.412.2.4.53.7
The minor functional aspect of the product causing the fault.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER other(0), unknown(1)  

dMTFVoltageProbeEvt1 1
powerSupplyStatusChange
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor