BAY-STACK-SFF-MIB

File: BAY-STACK-SFF-MIB.mib (17078 bytes)

Imported modules

SNMPv2-SMI IF-MIB SYNOPTICS-ROOT-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY Integer32
InterfaceIndex bayStackMibs

Defined Types

BsDdiSfpEntry  
SEQUENCE    
  bsDdiSfpIfIndex InterfaceIndex
  bsDdiSfpCalibration INTEGER
  bsDdiSfpRxPowerMeasurement INTEGER
  bsDdiSfpTempValue Integer32
  bsDdiSfpTempLowAlarmThreshold Integer32
  bsDdiSfpTempLowWarnThreshold Integer32
  bsDdiSfpTempHighAlarmThreshold Integer32
  bsDdiSfpTempHighWarnThreshold Integer32
  bsDdiSfpVoltageValue Integer32
  bsDdiSfpVoltageLowAlarmThreshold Integer32
  bsDdiSfpVoltageLowWarnThreshold Integer32
  bsDdiSfpVoltageHighAlarmThreshold Integer32
  bsDdiSfpVoltageHighWarnThreshold Integer32
  bsDdiSfpBiasValue Integer32
  bsDdiSfpBiasLowAlarmThreshold Integer32
  bsDdiSfpBiasLowWarnThreshold Integer32
  bsDdiSfpBiasHighAlarmThreshold Integer32
  bsDdiSfpBiasHighWarnThreshold Integer32
  bsDdiSfpTxPowerValue Integer32
  bsDdiSfpTxPowerLowAlarmThreshold Integer32
  bsDdiSfpTxPowerLowWarnThreshold Integer32
  bsDdiSfpTxPowerHighAlarmThreshold Integer32
  bsDdiSfpTxPowerHighWarnThreshold Integer32
  bsDdiSfpRxPowerValue Integer32
  bsDdiSfpRxPowerLowAlarmThreshold Integer32
  bsDdiSfpRxPowerLowWarnThreshold Integer32
  bsDdiSfpRxPowerHighAlarmThreshold Integer32
  bsDdiSfpRxPowerHighWarnThreshold Integer32

Defined Values

bayStackDdiSfpMib 1.3.6.1.4.1.45.5.29
Avaya SFF MIB Copyright 2012 Avaya, Inc. All rights reserved. This Avaya SNMP Management Information Base Specification embodies Avaya's confidential and proprietary intellectual property. Avaya retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Avaya makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

bsDdiSfpNotifications 1.3.6.1.4.1.45.5.29.0
OBJECT IDENTIFIER    

bsDdiSfpObjects 1.3.6.1.4.1.45.5.29.1
OBJECT IDENTIFIER    

bsDdiSfpTable 1.3.6.1.4.1.45.5.29.1.2
This table contains information about DDI SFPs. Entries will exist in this table only for DDI SFP ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BsDdiSfpEntry

bsDdiSfpEntry 1.3.6.1.4.1.45.5.29.1.2.1
SFF interface settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  BsDdiSfpEntry  

bsDdiSfpIfIndex 1.3.6.1.4.1.45.5.29.1.2.1.1
Identifies the ifIndex of the SFF port.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

bsDdiSfpCalibration 1.3.6.1.4.1.45.5.29.1.2.1.2
This object indicates whether the actual values read from EEPROM internally within an implementation are already calibrated to the appropriate units (Volts, mA, dB, etc), or whether these values are first converted to appropriate units. The value external(2) indicates that the values as read from EEPROM must be converted. Note that this is only an indication of what happens internally within an implementation, and does not have any effect on the values of other columns in this table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

bsDdiSfpRxPowerMeasurement 1.3.6.1.4.1.45.5.29.1.2.1.3
This object indicates the measurement type used for the received power. A value of oma(1) indicates Optical Modulation Amplitude (OMA).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER oma(1), averagePower(2)  

bsDdiSfpTempValue 1.3.6.1.4.1.45.5.29.1.2.1.4
The actual temperature value, measured in 1/10000 Celsius.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1280000..1280000  

bsDdiSfpTempLowAlarmThreshold 1.3.6.1.4.1.45.5.29.1.2.1.5
The low alarm temperature threshold, measure in 1/10000 Celsius.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1280000..1280000  

bsDdiSfpTempLowWarnThreshold 1.3.6.1.4.1.45.5.29.1.2.1.6
The low warn temperature threshold, measure in 1/10000 Celsius.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1280000..1280000  

bsDdiSfpTempHighAlarmThreshold 1.3.6.1.4.1.45.5.29.1.2.1.7
The high alarm temperature threshold, measure in 1/10000 Celsius.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1280000..1280000  

bsDdiSfpTempHighWarnThreshold 1.3.6.1.4.1.45.5.29.1.2.1.8
The high warn temperature threshold, measure in 1/10000 Celsius.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1280000..1280000  

bsDdiSfpVoltageValue 1.3.6.1.4.1.45.5.29.1.2.1.9
The actual voltage value, measured in 1/10000 volts.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65500  

bsDdiSfpVoltageLowAlarmThreshold 1.3.6.1.4.1.45.5.29.1.2.1.10
The low alarm voltage threshold, measured in 1/10000 volts.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65500  

bsDdiSfpVoltageLowWarnThreshold 1.3.6.1.4.1.45.5.29.1.2.1.11
The low warn voltage threshold, measured in 1/10000 volts.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65500  

bsDdiSfpVoltageHighAlarmThreshold 1.3.6.1.4.1.45.5.29.1.2.1.12
The high alarm voltage threshold, measured in 1/10000 volts.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65500  

bsDdiSfpVoltageHighWarnThreshold 1.3.6.1.4.1.45.5.29.1.2.1.13
The high warn voltage threshold, measured in 1/10000 volts.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65500  

bsDdiSfpBiasValue 1.3.6.1.4.1.45.5.29.1.2.1.14
The actual bias value, measured in 1/10000 mA.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1280000  

bsDdiSfpBiasLowAlarmThreshold 1.3.6.1.4.1.45.5.29.1.2.1.15
The low alarm bias threshold, measured in 1/10000 mA.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1280000  

bsDdiSfpBiasLowWarnThreshold 1.3.6.1.4.1.45.5.29.1.2.1.16
The low warn bias threshold, measured in 1/10000 mA.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1280000  

bsDdiSfpBiasHighAlarmThreshold 1.3.6.1.4.1.45.5.29.1.2.1.17
The high alarm bias threshold, measured in 1/10000 mA.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1280000  

bsDdiSfpBiasHighWarnThreshold 1.3.6.1.4.1.45.5.29.1.2.1.18
The high warn bias threshold, measured in 1/10000 mA.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1280000  

bsDdiSfpTxPowerValue 1.3.6.1.4.1.45.5.29.1.2.1.19
The actual transmit power value, measured in 1/10000 dBm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -400000..83000  

bsDdiSfpTxPowerLowAlarmThreshold 1.3.6.1.4.1.45.5.29.1.2.1.20
The low alarm transmit power threshold, measured in 1/10000 dBm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -400000..83000  

bsDdiSfpTxPowerLowWarnThreshold 1.3.6.1.4.1.45.5.29.1.2.1.21
The low warn transmit power threshold, measured in 1/10000 dBm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -400000..83000  

bsDdiSfpTxPowerHighAlarmThreshold 1.3.6.1.4.1.45.5.29.1.2.1.22
The high alarm transmit power threshold, measured in 1/10000 dBm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -400000..83000  

bsDdiSfpTxPowerHighWarnThreshold 1.3.6.1.4.1.45.5.29.1.2.1.23
The high warn transmit power threshold, measured in 1/10000 dBm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -400000..83000  

bsDdiSfpRxPowerValue 1.3.6.1.4.1.45.5.29.1.2.1.24
The actual receive power value, measured in 1/10000 dBm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -400000..83000  

bsDdiSfpRxPowerLowAlarmThreshold 1.3.6.1.4.1.45.5.29.1.2.1.25
The low alarm receive power threshold, measured in 1/10000 dBm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -400000..83000  

bsDdiSfpRxPowerLowWarnThreshold 1.3.6.1.4.1.45.5.29.1.2.1.26
The low warn receive power threshold, measured in 1/10000 dBm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -400000..83000  

bsDdiSfpRxPowerHighAlarmThreshold 1.3.6.1.4.1.45.5.29.1.2.1.27
The high alarm receive power threshold, measured in 1/10000 dBm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -400000..83000  

bsDdiSfpRxPowerHighWarnThreshold 1.3.6.1.4.1.45.5.29.1.2.1.28
The high warn receive power threshold, measured in 1/10000 dBm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -400000..83000  

bsDdiSfpTempAlarm 1.3.6.1.4.1.45.5.29.0.1
This notification is generated when a transceiver's temperature reaches an alarm level.
Status: current Access: read-only
NOTIFICATION-TYPE    

bsDdiSfpTempWarn 1.3.6.1.4.1.45.5.29.0.2
This notification is generated when a transceiver's temperature reaches a warning level.
Status: current Access: read-only
NOTIFICATION-TYPE    

bsDdiSfpTempNormal 1.3.6.1.4.1.45.5.29.0.3
This notification is generated when a transceiver's temperature reaches normal operating level. The notification is triggered after the transceiver's temperature has reached a warning or alarm level and then returns to normal level.
Status: current Access: read-only
NOTIFICATION-TYPE    

bsDdiSfpVoltageAlarm 1.3.6.1.4.1.45.5.29.0.4
This notification is generated when a transceiver's voltage reaches an alarm level.
Status: current Access: read-only
NOTIFICATION-TYPE    

bsDdiSfpVoltageWarn 1.3.6.1.4.1.45.5.29.0.5
This notification is generated when a transceiver's voltage reaches a warning level.
Status: current Access: read-only
NOTIFICATION-TYPE    

bsDdiSfpVoltageNormal 1.3.6.1.4.1.45.5.29.0.6
This notification is generated when a transceiver's voltage reaches normal operating level. The notification is triggered after the transceiver's voltage has reached a warning or alarm level and then returns to normal level.
Status: current Access: read-only
NOTIFICATION-TYPE    

bsDdiSfpBiasAlarm 1.3.6.1.4.1.45.5.29.0.7
This notification is generated when a transceiver's bias reaches an alarm level.
Status: current Access: read-only
NOTIFICATION-TYPE    

bsDdiSfpBiasWarn 1.3.6.1.4.1.45.5.29.0.8
This notification is generated when a transceiver's bias reaches a warning level.
Status: current Access: read-only
NOTIFICATION-TYPE    

bsDdiSfpBiasNormal 1.3.6.1.4.1.45.5.29.0.9
This notification is generated when a transceiver's bias reaches normal operating level. The notification is triggered after the transceiver's bias has reached a warning or alarm level and then returns to normal level.
Status: current Access: read-only
NOTIFICATION-TYPE    

bsDdiSfpTxAlarm 1.3.6.1.4.1.45.5.29.0.10
This notification is generated when a transceiver's transmit power reaches an alarm level.
Status: current Access: read-only
NOTIFICATION-TYPE    

bsDdiSfpTxWarn 1.3.6.1.4.1.45.5.29.0.11
This notification is generated when a transceiver's transmit power reaches a warning level.
Status: current Access: read-only
NOTIFICATION-TYPE    

bsDdiSfpTxNormal 1.3.6.1.4.1.45.5.29.0.12
This notification is generated when a transceiver's transmit power reaches normal operating level. The notification is triggered after the transceiver's transmit power has reached a warning or alarm level and then returns to normal level.
Status: current Access: read-only
NOTIFICATION-TYPE    

bsDdiSfpRxAlarm 1.3.6.1.4.1.45.5.29.0.13
This notification is generated when a transceiver's receive power reaches an alarm level.
Status: current Access: read-only
NOTIFICATION-TYPE    

bsDdiSfpRxWarn 1.3.6.1.4.1.45.5.29.0.14
This notification is generated when a transceiver's receive power reaches a warning level.
Status: current Access: read-only
NOTIFICATION-TYPE    

bsDdiSfpRxNormal 1.3.6.1.4.1.45.5.29.0.15
This notification is generated when a transceiver's receive power reaches normal operating level. The notification is triggered after the transceiver's receive power has reached a warning or alarm level and then returns to normal level.
Status: current Access: read-only
NOTIFICATION-TYPE