BDCOM-INTERFACES

File: BDCOM-INTERFACES.mib (52660 bytes)

Imported modules

RFC1155-SMI	RFC-1212	RFC1213-MIB
BDCOM-SMI

Imported symbols

Counter	OBJECT-TYPE	DisplayString
ifIndex	bdlocal

Defined Types

BdlifEntry
SEQUENCE
	bdlocIfHardType	DisplayString
	bdlocIfLineProt	INTEGER
	bdlocIfLastIn	INTEGER
	bdlocIfLastOut	INTEGER
	bdlocIfLastOutHang	INTEGER
	bdlocIfInBitsSec	INTEGER
	bdlocIfInPktsSec	INTEGER
	bdlocIfOutBitsSec	INTEGER
	bdlocIfOutPktsSec	INTEGER
	bdlocIfInRunts	INTEGER
	bdlocIfInGiants	INTEGER
	bdlocIfInCRC	INTEGER
	bdlocIfInFrame	INTEGER
	bdlocIfInOverrun	INTEGER
	bdlocIfInIgnored	INTEGER
	bdlocIfInAbort	INTEGER
	bdlocIfResets	INTEGER
	bdlocIfRestarts	INTEGER
	bdlocIfKeep	INTEGER
	bdlocIfReason	DisplayString
	bdlocIfCarTrans	INTEGER
	bdlocIfReliab	INTEGER
	bdlocIfDelay	INTEGER
	bdlocIfLoad	INTEGER
	bdlocIfCollisions	INTEGER
	bdlocIfInputQueueDrops	INTEGER
	bdlocIfOutputQueueDrops	INTEGER
	bdlocIfDescr	DisplayString
	bdlocIfSlowInPkts	Counter
	bdlocIfSlowOutPkts	Counter
	bdlocIfSlowInOctets	Counter
	bdlocIfSlowOutOctets	Counter
	bdlocIfFastInPkts	Counter
	bdlocIfFastOutPkts	Counter
	bdlocIfFastInOctets	Counter
	bdlocIfFastOutOctets	Counter
	bdlocIfotherInPkts	Counter
	bdlocIfotherOutPkts	Counter
	bdlocIfotherInOctets	Counter
	bdlocIfotherOutOctets	Counter
	bdlocIfipInPkts	Counter
	bdlocIfipOutPkts	Counter
	bdlocIfipInOctets	Counter
	bdlocIfipOutOctets	Counter
	bdlocIfdecnetInPkts	Counter
	bdlocIfdecnetOutPkts	Counter
	bdlocIfdecnetInOctets	Counter
	bdlocIfdecnetOutOctets	Counter
	bdlocIfxnsInPkts	Counter
	bdlocIfxnsOutPkts	Counter
	bdlocIfxnsInOctets	Counter
	bdlocIfxnsOutOctets	Counter
	bdlocIfclnsInPkts	Counter
	bdlocIfclnsOutPkts	Counter
	bdlocIfclnsInOctets	Counter
	bdlocIfclnsOutOctets	Counter
	bdlocIfappletalkInPkts	Counter
	bdlocIfappletalkOutPkts	Counter
	bdlocIfappletalkInOctets	Counter
	bdlocIfappletalkOutOctets	Counter
	bdlocIfnovellInPkts	Counter
	bdlocIfnovellOutPkts	Counter
	bdlocIfnovellInOctets	Counter
	bdlocIfnovellOutOctets	Counter
	bdlocIfapolloInPkts	Counter
	bdlocIfapolloOutPkts	Counter
	bdlocIfapolloInOctets	Counter
	bdlocIfapolloOutOctets	Counter
	bdlocIfvinesInPkts	Counter
	bdlocIfvinesOutPkts	Counter
	bdlocIfvinesInOctets	Counter
	bdlocIfvinesOutOctets	Counter
	bdlocIfbridgedInPkts	Counter
	bdlocIfbridgedOutPkts	Counter
	bdlocIfbridgedInOctets	Counter
	bdlocIfbridgedOutOctets	Counter
	bdlocIfsrbInPkts	Counter
	bdlocIfsrbOutPkts	Counter
	bdlocIfsrbInOctets	Counter
	bdlocIfsrbOutOctets	Counter
	bdlocIfchaosInPkts	Counter
	bdlocIfchaosOutPkts	Counter
	bdlocIfchaosInOctets	Counter
	bdlocIfchaosOutOctets	Counter
	bdlocIfpupInPkts	Counter
	bdlocIfpupOutPkts	Counter
	bdlocIfpupInOctets	Counter
	bdlocIfpupOutOctets	Counter
	bdlocIfmopInPkts	Counter
	bdlocIfmopOutPkts	Counter
	bdlocIfmopInOctets	Counter
	bdlocIfmopOutOctets	Counter
	bdlocIflanmanInPkts	Counter
	bdlocIflanmanOutPkts	Counter
	bdlocIflanmanInOctets	Counter
	bdlocIflanmanOutOctets	Counter
	bdlocIfstunInPkts	Counter
	bdlocIfstunOutPkts	Counter
	bdlocIfstunInOctets	Counter
	bdlocIfstunOutOctets	Counter
	bdlocIfspanInPkts	Counter
	bdlocIfspanOutPkts	Counter
	bdlocIfspanInOctets	Counter
	bdlocIfspanOutOctets	Counter
	bdlocIfarpInPkts	Counter
	bdlocIfarpOutPkts	Counter
	bdlocIfarpInOctets	Counter
	bdlocIfarpOutOctets	Counter
	bdlocIfprobeInPkts	Counter
	bdlocIfprobeOutPkts	Counter
	bdlocIfprobeInOctets	Counter
	bdlocIfprobeOutOctets	Counter
	bdlocIfDribbleInputs	Counter

BdLFSIPEntry
SEQUENCE
	bdlocIfFSIPIndex	INTEGER
	bdlocIfFSIPtype	INTEGER
	bdlocIfFSIPrts	INTEGER
	bdlocIfFSIPcts	INTEGER
	bdlocIfFSIPdtr	INTEGER
	bdlocIfFSIPdcd	INTEGER
	bdlocIfFSIPdsr	INTEGER
	bdlocIfFSIPrxClockrate	INTEGER
	bdlocIfFSIPrxClockrateHi	INTEGER
	bdlocIfFSIPportType	INTEGER

Defined Values

bdlinterfaces		1.3.6.1.4.1.3320.2.2
OBJECT IDENTIFIER

bdlifTable		1.3.6.1.4.1.3320.2.2.1
A list of interface entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		BdlifEntry

bdlifEntry		1.3.6.1.4.1.3320.2.2.1.1
A collection of additional objects in the BDCom interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	BdlifEntry

bdlocIfHardType		1.3.6.1.4.1.3320.2.2.1.1.1
Returns the type of interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

bdlocIfLineProt		1.3.6.1.4.1.3320.2.2.1.1.2
Boolean whether interface line protocol is up or not.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfLastIn		1.3.6.1.4.1.3320.2.2.1.1.3
Elapsed time in milliseconds since last line protocol input packet was received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfLastOut		1.3.6.1.4.1.3320.2.2.1.1.4
Elapsed time in milliseconds since last line protocol output packet was transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfLastOutHang		1.3.6.1.4.1.3320.2.2.1.1.5
Elapsed time in milliseconds since last line protocol output packet could not be successfully transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfInBitsSec		1.3.6.1.4.1.3320.2.2.1.1.6
Five minute exponentially-decayed moving average of input bits per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfInPktsSec		1.3.6.1.4.1.3320.2.2.1.1.7
Five minute exponentially-decayed moving average of input packets per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfOutBitsSec		1.3.6.1.4.1.3320.2.2.1.1.8
Five minute exponentially-decayed moving average of output bits per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfOutPktsSec		1.3.6.1.4.1.3320.2.2.1.1.9
Five minute exponentially-decayed moving average of output packets per second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfInRunts		1.3.6.1.4.1.3320.2.2.1.1.10
Number of packets input which were smaller then the allowable physical media permitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfInGiants		1.3.6.1.4.1.3320.2.2.1.1.11
Number of input packets which were larger then the physical media permitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfInCRC		1.3.6.1.4.1.3320.2.2.1.1.12
Number of input packets which had cyclic redundancy checksum errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfInFrame		1.3.6.1.4.1.3320.2.2.1.1.13
Number of input packet which were misaligned.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfInOverrun		1.3.6.1.4.1.3320.2.2.1.1.14
Count of input which arrived too quickly for the to hardware receive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfInIgnored		1.3.6.1.4.1.3320.2.2.1.1.15
Number of input packets which were simply ignored by this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfInAbort		1.3.6.1.4.1.3320.2.2.1.1.16
Number of input packets which were aborted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfResets		1.3.6.1.4.1.3320.2.2.1.1.17
Number of times the interface internally reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfRestarts		1.3.6.1.4.1.3320.2.2.1.1.18
Number of times interface needed to be completely restarted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfKeep		1.3.6.1.4.1.3320.2.2.1.1.19
Boolean whether keepalives are enabled on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfReason		1.3.6.1.4.1.3320.2.2.1.1.20
Reason for interface last status change.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

bdlocIfCarTrans		1.3.6.1.4.1.3320.2.2.1.1.21
Number of times interface saw the carrier signal transition.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfReliab		1.3.6.1.4.1.3320.2.2.1.1.22
The reliability of the interface. Used by IGRP.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfDelay		1.3.6.1.4.1.3320.2.2.1.1.23
The amount of delay in microseconds of the interface. Used by IGRP.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfLoad		1.3.6.1.4.1.3320.2.2.1.1.24
The loading factor of the interface. Used by IGRP.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfCollisions		1.3.6.1.4.1.3320.2.2.1.1.25
The number of output collisions detected on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfInputQueueDrops		1.3.6.1.4.1.3320.2.2.1.1.26
The number of packets dropped because the input queue was full.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfOutputQueueDrops		1.3.6.1.4.1.3320.2.2.1.1.27
The number of packets dropped because the output queue was full.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfDescr		1.3.6.1.4.1.3320.2.2.1.1.28
User configurable interface description.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

bdlocIfSlowInPkts		1.3.6.1.4.1.3320.2.2.1.1.30
Packet count for Inbound traffic routed with slow switching
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfSlowOutPkts		1.3.6.1.4.1.3320.2.2.1.1.31
Packet count for Outbound traffic routed with slow switching
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfSlowInOctets		1.3.6.1.4.1.3320.2.2.1.1.32
Octet count for Inbound traffic routed with slow switching
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfSlowOutOctets		1.3.6.1.4.1.3320.2.2.1.1.33
Octet count for Outbound traffic routed with slow switching
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfFastInPkts		1.3.6.1.4.1.3320.2.2.1.1.34
Packet count for Inbound traffic routed with fast switching
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfFastOutPkts		1.3.6.1.4.1.3320.2.2.1.1.35
Packet count for Outbound traffic routed with fast switching
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfFastInOctets		1.3.6.1.4.1.3320.2.2.1.1.36
Octet count for Inbound traffic routed with fast switching
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfFastOutOctets		1.3.6.1.4.1.3320.2.2.1.1.37
Octet count for Outbound traffic routed with fast switching
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfotherInPkts		1.3.6.1.4.1.3320.2.2.1.1.38
Other protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfotherOutPkts		1.3.6.1.4.1.3320.2.2.1.1.39
Other protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfotherInOctets		1.3.6.1.4.1.3320.2.2.1.1.40
Other protocol input octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfotherOutOctets		1.3.6.1.4.1.3320.2.2.1.1.41
Other protocol output octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfipInPkts		1.3.6.1.4.1.3320.2.2.1.1.42
ip protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfipOutPkts		1.3.6.1.4.1.3320.2.2.1.1.43
ip protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfipInOctets		1.3.6.1.4.1.3320.2.2.1.1.44
ip protocol input octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfipOutOctets		1.3.6.1.4.1.3320.2.2.1.1.45
ip protocol output octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfdecnetInPkts		1.3.6.1.4.1.3320.2.2.1.1.46
Decnet protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfdecnetOutPkts		1.3.6.1.4.1.3320.2.2.1.1.47
Decnet protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfdecnetInOctets		1.3.6.1.4.1.3320.2.2.1.1.48
Decnet protocol input byte count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfdecnetOutOctets		1.3.6.1.4.1.3320.2.2.1.1.49
Decnet protocol output byte count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfxnsInPkts		1.3.6.1.4.1.3320.2.2.1.1.50
XNS protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfxnsOutPkts		1.3.6.1.4.1.3320.2.2.1.1.51
XNS protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfxnsInOctets		1.3.6.1.4.1.3320.2.2.1.1.52
XNS protocol input byte count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfxnsOutOctets		1.3.6.1.4.1.3320.2.2.1.1.53
XNS protocol output byte count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfclnsInPkts		1.3.6.1.4.1.3320.2.2.1.1.54
CLNS protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfclnsOutPkts		1.3.6.1.4.1.3320.2.2.1.1.55
CLNS protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfclnsInOctets		1.3.6.1.4.1.3320.2.2.1.1.56
CLNS protocol input byte count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfclnsOutOctets		1.3.6.1.4.1.3320.2.2.1.1.57
CLNS protocol output byte count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfappletalkInPkts		1.3.6.1.4.1.3320.2.2.1.1.58
Appletalk protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfappletalkOutPkts		1.3.6.1.4.1.3320.2.2.1.1.59
Appletalk protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfappletalkInOctets		1.3.6.1.4.1.3320.2.2.1.1.60
Appletalk protocol input octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfappletalkOutOctets		1.3.6.1.4.1.3320.2.2.1.1.61
Appletalk protocol output octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfnovellInPkts		1.3.6.1.4.1.3320.2.2.1.1.62
Novell protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfnovellOutPkts		1.3.6.1.4.1.3320.2.2.1.1.63
Novell protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfnovellInOctets		1.3.6.1.4.1.3320.2.2.1.1.64
Novell protocol input octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfnovellOutOctets		1.3.6.1.4.1.3320.2.2.1.1.65
Novell protocol output octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfapolloInPkts		1.3.6.1.4.1.3320.2.2.1.1.66
Apollo protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfapolloOutPkts		1.3.6.1.4.1.3320.2.2.1.1.67
Apollo protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfapolloInOctets		1.3.6.1.4.1.3320.2.2.1.1.68
Apollo protocol input octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfapolloOutOctets		1.3.6.1.4.1.3320.2.2.1.1.69
Apollo protocol output octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfvinesInPkts		1.3.6.1.4.1.3320.2.2.1.1.70
Vines protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfvinesOutPkts		1.3.6.1.4.1.3320.2.2.1.1.71
Vines protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfvinesInOctets		1.3.6.1.4.1.3320.2.2.1.1.72
Vines protocol input octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfvinesOutOctets		1.3.6.1.4.1.3320.2.2.1.1.73
Vines protocol output octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfbridgedInPkts		1.3.6.1.4.1.3320.2.2.1.1.74
Bridged protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfbridgedOutPkts		1.3.6.1.4.1.3320.2.2.1.1.75
Bridged protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfbridgedInOctets		1.3.6.1.4.1.3320.2.2.1.1.76
Bridged protocol input octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfbridgedOutOctets		1.3.6.1.4.1.3320.2.2.1.1.77
Bridged protocol output octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfsrbInPkts		1.3.6.1.4.1.3320.2.2.1.1.78
SRB protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfsrbOutPkts		1.3.6.1.4.1.3320.2.2.1.1.79
SRB protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfsrbInOctets		1.3.6.1.4.1.3320.2.2.1.1.80
SRB protocol input octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfsrbOutOctets		1.3.6.1.4.1.3320.2.2.1.1.81
SRB protocol output octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfchaosInPkts		1.3.6.1.4.1.3320.2.2.1.1.82
Choas protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfchaosOutPkts		1.3.6.1.4.1.3320.2.2.1.1.83
Choas protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfchaosInOctets		1.3.6.1.4.1.3320.2.2.1.1.84
Choas protocol input octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfchaosOutOctets		1.3.6.1.4.1.3320.2.2.1.1.85
Choas protocol output octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfpupInPkts		1.3.6.1.4.1.3320.2.2.1.1.86
PUP protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfpupOutPkts		1.3.6.1.4.1.3320.2.2.1.1.87
PUP protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfpupInOctets		1.3.6.1.4.1.3320.2.2.1.1.88
PUP protocol input octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfpupOutOctets		1.3.6.1.4.1.3320.2.2.1.1.89
PUP protocol output octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfmopInPkts		1.3.6.1.4.1.3320.2.2.1.1.90
MOP protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfmopOutPkts		1.3.6.1.4.1.3320.2.2.1.1.91
MOP protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfmopInOctets		1.3.6.1.4.1.3320.2.2.1.1.92
MOP protocol input octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfmopOutOctets		1.3.6.1.4.1.3320.2.2.1.1.93
MOP protocol output octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIflanmanInPkts		1.3.6.1.4.1.3320.2.2.1.1.94
LanMan protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIflanmanOutPkts		1.3.6.1.4.1.3320.2.2.1.1.95
LanMan protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIflanmanInOctets		1.3.6.1.4.1.3320.2.2.1.1.96
LanMan protocol input octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIflanmanOutOctets		1.3.6.1.4.1.3320.2.2.1.1.97
LanMan protocol output octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfstunInPkts		1.3.6.1.4.1.3320.2.2.1.1.98
STUN protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfstunOutPkts		1.3.6.1.4.1.3320.2.2.1.1.99
STUN protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfstunInOctets		1.3.6.1.4.1.3320.2.2.1.1.100
STUN protocol input octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfstunOutOctets		1.3.6.1.4.1.3320.2.2.1.1.101
STUN protocol output octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfspanInPkts		1.3.6.1.4.1.3320.2.2.1.1.102
Spanning tree input protocol packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfspanOutPkts		1.3.6.1.4.1.3320.2.2.1.1.103
Spanning tree output protocol packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfspanInOctets		1.3.6.1.4.1.3320.2.2.1.1.104
Spanning tree input octet packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfspanOutOctets		1.3.6.1.4.1.3320.2.2.1.1.105
Spanning tree output octet packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfarpInPkts		1.3.6.1.4.1.3320.2.2.1.1.106
Arp protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfarpOutPkts		1.3.6.1.4.1.3320.2.2.1.1.107
Arp protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfarpInOctets		1.3.6.1.4.1.3320.2.2.1.1.108
Arp protocol input octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfarpOutOctets		1.3.6.1.4.1.3320.2.2.1.1.109
Arp protocol output octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfprobeInPkts		1.3.6.1.4.1.3320.2.2.1.1.110
Probe protocol input packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfprobeOutPkts		1.3.6.1.4.1.3320.2.2.1.1.111
Probe protocol output packet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfprobeInOctets		1.3.6.1.4.1.3320.2.2.1.1.112
Probe protocol input octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfprobeOutOctets		1.3.6.1.4.1.3320.2.2.1.1.113
Probe protocol output octet count
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlocIfDribbleInputs		1.3.6.1.4.1.3320.2.2.1.1.114
The number of good packets received with the dribble condition present
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

bdlFSIPTable		1.3.6.1.4.1.3320.2.2.2
A list of card entries for 4T, HSSI, Mx serial or FSIP.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		BdLFSIPEntry

bdlFSIPEntry		1.3.6.1.4.1.3320.2.2.2.1
A collection of objects specific to 4T, HSSI, Mx serial or FSIP.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	BdLFSIPEntry

bdlocIfFSIPIndex		1.3.6.1.4.1.3320.2.2.2.1.1
Interface index of this card corresponding to its ifIndex
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfFSIPtype		1.3.6.1.4.1.3320.2.2.2.1.2
Is this FSIP line DCE or DTE
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(1), dte(2), dce(3)

bdlocIfFSIPrts		1.3.6.1.4.1.3320.2.2.2.1.3
Is the RTS signal up or down
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(1), up(2), down(3)

bdlocIfFSIPcts		1.3.6.1.4.1.3320.2.2.2.1.4
Is the CTS signal up or down
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(1), up(2), down(3)

bdlocIfFSIPdtr		1.3.6.1.4.1.3320.2.2.2.1.5
Is the DTR signal up or down
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(1), up(2), down(3)

bdlocIfFSIPdcd		1.3.6.1.4.1.3320.2.2.2.1.6
Is the DCD signal up or down
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(1), up(2), down(3)

bdlocIfFSIPdsr		1.3.6.1.4.1.3320.2.2.2.1.7
Is the DSR signal up or down
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(1), up(2), down(3)

bdlocIfFSIPrxClockrate		1.3.6.1.4.1.3320.2.2.2.1.8
Received clock rate
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfFSIPrxClockrateHi		1.3.6.1.4.1.3320.2.2.2.1.9
Use when received clock rate is greater than 2^32 (gigabits).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

bdlocIfFSIPportType		1.3.6.1.4.1.3320.2.2.2.1.10
Cable Type of 4T, HSSI, Mx serial or FSIP
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noCable(1), rs232(2), rs422(3), rs423(4), v35(5), x21(6), rs449(7), rs530(8), hssi(9)