BIANCA-BOX-ISDN-MIB

File: BIANCA-BOX-ISDN-MIB.mib (63347 bytes)

Imported modules

RFC1155-SMI SNMPv2-TC

Imported symbols

TimeTicks Counter DisplayString
OBJECT-TYPE

Defined Types

Date  
INTEGER    

HexValue  
INTEGER    

IsdnIfEntry  
SEQUENCE    
  isdnIfIndex INTEGER
  isdnIfDescription DisplayString
  isdnIfLayer1State INTEGER
  isdnIfBchannelControl INTEGER
  isdnIfActivationRequest INTEGER
  isdnIfMode INTEGER
  isdnIfTimerT3 INTEGER
  isdnIfUsePowerDetector INTEGER
  isdnIfNumberOfChannels INTEGER
  isdnIfTimeouts Counter
  isdnIfActivates Counter
  isdnIfDeactivates Counter
  isdnIfSlips Counter
  isdnIfAutoconfigState INTEGER
  isdnIfAutoconfig INTEGER

IsdnChEntry  
SEQUENCE    
  isdnChIsdnIfIndex INTEGER
  isdnChNumber INTEGER
  isdnChState INTEGER
  isdnChThroughput INTEGER
  isdnChType INTEGER
  isdnChBundle INTEGER
  isdnChReceivedPackets Counter
  isdnChReceivedOctets Counter
  isdnChReceivedErrors Counter
  isdnChTransmitPackets Counter
  isdnChTransmitOctets Counter
  isdnChTransmitErrors Counter

IsdnStkEntry  
SEQUENCE    
  isdnStkNumber INTEGER
  isdnStkIsdnIfIndex INTEGER
  isdnStkProtocolProfile INTEGER
  isdnStkConfiguration INTEGER
  isdnStkSPID DisplayString
  isdnStkTeiProc INTEGER
  isdnStkTeiValue INTEGER
  isdnStkClearAllCalls INTEGER
  isdnStkStatus INTEGER
  isdnStkLayer2State INTEGER
  isdnStkBchannels INTEGER
  isdnStkDialOutPrefix DisplayString

IsdnCallEntry  
SEQUENCE    
  isdnCallStkNumber INTEGER
  isdnCallType INTEGER
  isdnCallReference INTEGER
  isdnCallAge TimeTicks
  isdnCallState INTEGER
  isdnCallIsdnIfIndex INTEGER
  isdnCallChannel INTEGER
  isdnCallDspItem INTEGER
  isdnCallRemoteNumber DisplayString
  isdnCallRemoteSubaddress OCTET STRING
  isdnCallLocalNumber DisplayString
  isdnCallLocalSubaddress OCTET STRING
  isdnCallServiceIndicator INTEGER
  isdnCallAddInfo INTEGER
  isdnCallBC OCTET STRING
  isdnCallLLC OCTET STRING
  isdnCallHLC OCTET STRING
  isdnCallCharge INTEGER
  isdnCallReceivedPackets Counter
  isdnCallReceivedOctets Counter
  isdnCallReceivedErrors Counter
  isdnCallTransmitPackets Counter
  isdnCallTransmitOctets Counter
  isdnCallTransmitErrors Counter
  isdnCallChargeInfo DisplayString
  isdnCallScreening INTEGER
  isdnCallInfo DisplayString

IsdnDispatchEntry  
SEQUENCE    
  isdnDspStkNumber INTEGER
  isdnDspLocalNumber DisplayString
  isdnDspLocalSubaddress OCTET STRING
  isdnDspItem INTEGER
  isdnDspBearer INTEGER
  isdnDspSlot INTEGER
  isdnDspUnit INTEGER
  isdnDspDirection INTEGER
  isdnDspMode INTEGER
  isdnDspUserName DisplayString

IsdnDChanX31Entry  
SEQUENCE    
  isdnX31IsdnIfIndex INTEGER
  isdnX31TeiProc INTEGER
  isdnX31TeiValue INTEGER
  isdnX31AssignedTo INTEGER

IsdnCallHistoryEntry  
SEQUENCE    
  isdnCallHistoryStkNumber INTEGER
  isdnCallHistoryType INTEGER
  isdnCallHistoryTime Date
  isdnCallHistoryDuration INTEGER
  isdnCallHistoryIsdnIfIndex INTEGER
  isdnCallHistoryChannel INTEGER
  isdnCallHistoryDspItem INTEGER
  isdnCallHistoryRemoteNumber DisplayString
  isdnCallHistoryRemoteSubaddress OCTET STRING
  isdnCallHistoryLocalNumber DisplayString
  isdnCallHistoryLocalSubaddress OCTET STRING
  isdnCallHistoryServiceIndicator INTEGER
  isdnCallHistoryAddInfo INTEGER
  isdnCallHistoryBC OCTET STRING
  isdnCallHistoryLLC OCTET STRING
  isdnCallHistoryHLC OCTET STRING
  isdnCallHistoryCharge INTEGER
  isdnCallHistory1TR6Cause HexValue
  isdnCallHistoryDSS1Cause HexValue
  isdnCallHistoryLocalCause INTEGER
  isdnCallHistoryChargeInfo DisplayString
  isdnCallHistoryScreening INTEGER
  isdnCallHistoryInfo DisplayString
  isdnCallHistoryReceivedPackets Counter
  isdnCallHistoryReceivedOctets Counter
  isdnCallHistoryReceivedErrors Counter
  isdnCallHistoryTransmitPackets Counter
  isdnCallHistoryTransmitOctets Counter
  isdnCallHistoryTransmitErrors Counter

IsdnloginAllowEntry  
SEQUENCE    
  isdnloginAllowStkNumber INTEGER -1..31
  isdnloginAllowRemoteNumber DisplayString
  isdnloginAllowRemoteSubaddress OCTET STRING
  isdnloginAllowScreening INTEGER

IsdnCreditsEntry  
SEQUENCE    
  isdnCreditsSubsysNumber INTEGER
  isdnCreditsSurveillance INTEGER
  isdnCreditsMeasuretime INTEGER
  isdnCreditsMaxInCon INTEGER
  isdnCreditsMaxOutCon INTEGER
  isdnCreditsMaxCharge INTEGER
  isdnCreditsMaxInDuration INTEGER
  isdnCreditsMaxOutDuration INTEGER
  isdnCreditsTimeleft INTEGER
  isdnCreditsCurrentInCon INTEGER
  isdnCreditsCurrentOutCon INTEGER
  isdnCreditsTotalInCon INTEGER
  isdnCreditsTotalOutCon INTEGER
  isdnCreditsTotalMaxCon INTEGER
  isdnCreditsTotalCharge INTEGER
  isdnCreditsTotalInDuration INTEGER
  isdnCreditsTotalOutDuration INTEGER
  isdnCreditsMaxCurrentInCon INTEGER
  isdnCreditsMaxCurrentOutCon INTEGER
  isdnCreditsMaxCurrentCon INTEGER

Defined Values

org 1.3
OBJECT IDENTIFIER    

dod 1.3.6
OBJECT IDENTIFIER    

internet 1.3.6.1
OBJECT IDENTIFIER    

private 1.3.6.1.4
OBJECT IDENTIFIER    

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

bintec 1.3.6.1.4.1.272
OBJECT IDENTIFIER    

bibo 1.3.6.1.4.1.272.4
OBJECT IDENTIFIER    

isdn 1.3.6.1.4.1.272.4.2
OBJECT IDENTIFIER    

isdnIfTable 1.3.6.1.4.1.272.4.2.1
The isdnIfTable contains information relating to the interfaces found on the system. Each entry corresponds to a connected ISDN interface (BRI or PRI). Entries can only be added or deleted by the system. Creating entries: Entries are created by the system only when a new BRI or PRI module is installed. Deleting entries: Entries are removed by the system after the appropriate BRI or PRI module is removed.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnIfEntry

isdnIfEntry 1.3.6.1.4.1.272.4.2.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnIfEntry  

isdnIfIndex 1.3.6.1.4.1.272.4.2.1.1.1
Unique index of the basic or primary rate interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnIfDescription 1.3.6.1.4.1.272.4.2.1.1.2
Textual description of the basic rate interface including its slot and number (e.g. bri2-0 means slot 2, unit 0).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

isdnIfLayer1State 1.3.6.1.4.1.272.4.2.1.1.3
The ISDN physical layer state according to I.430 f1(1) = inactive; f2(2) = sensing; f3(3) = deactivated; f4(4) = awaiting signal; f5(5) = identifying input; f6(6) = synchronized; f7(7) = activated; f8(8) = lost framing; g1(9) = deactive; g2(10) = pending activation; g3(11) = active; g4(12) = pending deactivation
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER f1(1), f2(2), f3(3), f4(4), f5(5), f6(6), f7(7), f8(8), g1(9), g2(10), g3(11), g4(12)  

isdnIfBchannelControl 1.3.6.1.4.1.272.4.2.1.1.4
B-channels are controlled by a call control protocol in the D-channel. Otherwise they may be used as permanent links.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER uncontrolled(1), controlled(2)  

isdnIfActivationRequest 1.3.6.1.4.1.272.4.2.1.1.5
When this object is set to 'activate' the BRICK will start an activation sequence of ISDN-Layer1 of the basic rate interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nooperation(1), activate(2)  

isdnIfMode 1.3.6.1.4.1.272.4.2.1.1.6
Specifies the mode of the interface. TE or NT Mode will be set for ISDN interfaces without PABX control. For PRI both NT (network termination) and TE (terminal equipment) modes are supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER te(1), nt(2), pabx-terminal(3), pabx-trunk(4), pabx-tie(5)  

isdnIfTimerT3 1.3.6.1.4.1.272.4.2.1.1.7
Value of Timer T3 in milliseconds.T3 is started whenever ISDNLayer-1 is activated (i.e. Activation Request is started).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnIfUsePowerDetector 1.3.6.1.4.1.272.4.2.1.1.8
Use the PS1 Power Detector to control the layer 1 automaton.This object is only valid for basic rate interfaces.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER use(1), dontuse(2)  

isdnIfNumberOfChannels 1.3.6.1.4.1.272.4.2.1.1.9
Number of Channels including the D channel, that are available on this ISDN Interface (3 = BRI, 31 = PRI).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..31  

isdnIfTimeouts 1.3.6.1.4.1.272.4.2.1.1.10
Number of timeouts of T3 during lifetime of the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnIfActivates 1.3.6.1.4.1.272.4.2.1.1.11
Number of successful activation cycles during lifetime of the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnIfDeactivates 1.3.6.1.4.1.272.4.2.1.1.12
Number of deactivations during lifetime of the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnIfAutoconfigState 1.3.6.1.4.1.272.4.2.1.1.13
Start auto configuration on this ISDN Interface. Auto configuration is a mechanism to automatically detect the attributes of an ISDN interface. This can be done at boot time (if isdnIfAutoConfig is set to 'on') or by manually setting this field to 'start'. Refer to Chapter 3 on Features and Methods.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER start(1), running(2), done(3)  

isdnIfAutoconfig 1.3.6.1.4.1.272.4.2.1.1.14
Start Autoconfiguration on this ISDN interface at bootup.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

isdnChTable 1.3.6.1.4.1.272.4.2.2
The isdnChTable contains information for each physical B or D channel on the system. The entries contain information regarding the configuration of the channel and various statistical data for active connections. Only the system can add entries to this table. Creating entries: Entries are created by the system when a new interface appears in the isdnIfTable; when a new BRI or PRI module is installed. Deleting entries: Are not possible.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnChEntry

isdnChEntry 1.3.6.1.4.1.272.4.2.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnChEntry  

isdnChIsdnIfIndex 1.3.6.1.4.1.272.4.2.2.1.1
Unique index of an Interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnChNumber 1.3.6.1.4.1.272.4.2.2.1.2
The channel number. 0 is D-channel, 1..2 are the B- channels of a BRI module, and 1..31 are the B-channels of a PRI module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnChState 1.3.6.1.4.1.272.4.2.2.1.3
Status of the Channel controlled either by the call control protocol or the physical state of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-connected(1), connected(2)  

isdnChType 1.3.6.1.4.1.272.4.2.2.1.4
Type of Channel.Setting this object to one of the leased values creates a new entry in the ifTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dialup(1), leased-dte(2), leased-dce(3), loopback(6), not-available(7)  

isdnChBundle 1.3.6.1.4.1.272.4.2.2.1.5
Index of the bundle to aggregate multiple Channels to one interface. Not valid in dialup mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

isdnChThroughput 1.3.6.1.4.1.272.4.2.2.1.6
Throughput of the channel in bits/second (64000 for B-channels, 16000 for BRI D-Channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnChReceivedPackets 1.3.6.1.4.1.272.4.2.2.1.7
Count of received valid HDLC Frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnChReceivedOctets 1.3.6.1.4.1.272.4.2.2.1.8
Count of received valid HDLC bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnChReceivedErrors 1.3.6.1.4.1.272.4.2.2.1.9
Count of received valid errors (can be detected by HDLC-Checksum-Errors).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnChTransmitPackets 1.3.6.1.4.1.272.4.2.2.1.10
Count of received valid HDLC Frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnChTransmitOctets 1.3.6.1.4.1.272.4.2.2.1.11
Count of received valid HDLC Frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnChTransmitErrors 1.3.6.1.4.1.272.4.2.2.1.12
Count of transmitted valid HDLC errors. Can occur when the transmitter can not be reloaded fast enough when transmitting large packets. This should only happen when the system is over encumbered.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnStkTable 1.3.6.1.4.1.272.4.2.3
The isdnStkTable contains information for each ISDN protocol stack currently configured on the system. Entries are normally created by the system at boot time, during the auto configuration process, but can also be added manually. Creating entries: Entries are created by the system during the ISDN auto configuration procedure at boot time (see Chapter 3). Entries can also be created by assigning a value to the Number and isdnIfNumber objects. Deleting entries: Entries can be removed by assigning the value 'delete' to the ProtocolProfile object.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnStkEntry

isdnStkEntry 1.3.6.1.4.1.272.4.2.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnStkEntry  

isdnStkNumber 1.3.6.1.4.1.272.4.2.3.1.1
Unique number of an ISDN stack (0..n). This number can be used in the isdnDispatchTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

isdnStkIsdnIfIndex 1.3.6.1.4.1.272.4.2.3.1.3
The index of the ISDN interface. The isdnIfTable lists all available ISDN interfaces.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnStkProtocolProfile 1.3.6.1.4.1.272.4.2.3.1.4
The protocol for the D channel. Assigning `delete' to this object has the effect of removing the entry from this table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), permanent(2), d1tr6(3), dss1(4), ni1(5), not-used(6), ess5(7), dms100(8), ins64(9)  

isdnStkConfiguration 1.3.6.1.4.1.272.4.2.3.1.5
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER point-to-multipoint(1), point-to-point(2)  

isdnStkSPID 1.3.6.1.4.1.272.4.2.3.1.6
The service profile identifier; only required for the national ISDN1 protocol in North America.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

isdnStkTeiProc 1.3.6.1.4.1.272.4.2.3.1.7
The Tei procedure used. Note that for point-to-point configurations this object should be set to fixed(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), fixed(2)  

isdnStkTeiValue 1.3.6.1.4.1.272.4.2.3.1.8
The Tei value. Note that for point-to-point configurations this object should be 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1..126  

isdnStkClearAllCalls 1.3.6.1.4.1.272.4.2.3.1.22
Setting this value to clear(2) will force all current connections on this stack to terminate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no-operation(1), clear(2)  

isdnStkStatus 1.3.6.1.4.1.272.4.2.3.1.23
Shows the status of this ISDN stack. If auto configuration was successful for this stack, this object will be loaded(1). If this stack is not loaded, ISDN calls are not possible.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER loaded(1), not-loaded(2)  

isdnStkLayer2State 1.3.6.1.4.1.272.4.2.3.1.24
Shows the current state of Layer2. To allow ISDN connections, the state established(4) must be assigned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER tei-unassigned(1), tei-assigned(2), aw-est(3), established(4)  

isdnStkBchannels 1.3.6.1.4.1.272.4.2.3.1.25
Number of B channels that correspond to that stack.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..31  

isdnStkDialOutPrefix 1.3.6.1.4.1.272.4.2.3.1.26
Prefix for PABX dialout. This entry is added to a dialing number provided by the calling site via PPP negotiation (LCP Callback Option / PPP Bandwith Alllocation Protocol).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

isdnCallTable 1.3.6.1.4.1.272.4.2.4
The isdnCallTable displays all currently active ISDN calls (incoming and outgoing). Only the system can add or remove entries to this table. Creating entries: Entries are added when an outgoing call is made or when an incoming call is connected. Deleting entries: Entries are removed once the respective call is disconnected.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnCallEntry

isdnCallEntry 1.3.6.1.4.1.272.4.2.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnCallEntry  

isdnCallStkNumber 1.3.6.1.4.1.272.4.2.4.1.1
The number of the ISDN-Stack, this call is going through. Refer to the isdnStkTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

isdnCallType 1.3.6.1.4.1.272.4.2.4.1.2
The direction of the call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2)  

isdnCallReference 1.3.6.1.4.1.272.4.2.4.1.3
The corresponding Call-Reference Value on the ISDN D-channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnCallAge 1.3.6.1.4.1.272.4.2.4.1.4
The age of the call. For outgoing calls, the time since the call began, or for incoming calls, the time since the call was received. The format is in hh:mm:ss.00.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

isdnCallState 1.3.6.1.4.1.272.4.2.4.1.5
The state of the call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER null(1), c-initiated(2), ovl-send(3), oc-procd(4), c-deliverd(5), c-present(7), c-recvd(8), ic-procd(10), active(11), discon-req(12), discon-ind(13), suspd-req(16), resum-req(18), ovl-recv(26)  

isdnCallIsdnIfIndex 1.3.6.1.4.1.272.4.2.4.1.6
The corresponding ISDN interface that is used for this call. Refer to the isdnIfTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnCallChannel 1.3.6.1.4.1.272.4.2.4.1.7
The corresponding B-channel on this ISDN interface. Refer to the isdnIfTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

isdnCallDspItem 1.3.6.1.4.1.272.4.2.4.1.8
The item to or from which this call is connected. For any routing tasks (IP, IPX, X.25, bridging, ...) the ppp(1) item is used. For the isdnlogin program, login(2) is used. For CAPI 1.1 programs, the items eaz0(48) .. eaz9(57) are used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ppp(1), login(2), undefined(10), ppp-64k(11), ppp-56k(12), ppp-modem(13), ppp-dovb(14), ppp-v110-1200(15), ppp-v110-2400(16), ppp-v110-4800(17), ppp-v110-9600(18), ppp-v110-14400(19), ppp-v110-19200(20), ppp-v110-38400(21), ppp-x75(22), extern(24), pots(25), ppp-modem-profile-1(26), ppp-modem-profile-2(27), ppp-modem-profile-3(28), ppp-modem-profile-4(29), ppp-modem-profile-5(30), ppp-modem-profile-6(31), ppp-modem-profile-7(32), ppp-modem-profile-8(33), eaz0(48), eaz1(49), eaz2(50), eaz3(51), eaz4(52), eaz5(53), eaz6(54), eaz7(55), eaz8(56), eaz9(57), x25-pad(58)  

isdnCallRemoteNumber 1.3.6.1.4.1.272.4.2.4.1.9
The ISDN number that was called (for outgoing calls) or was calling (for incoming calls).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

isdnCallRemoteSubaddress 1.3.6.1.4.1.272.4.2.4.1.10
The subaddress of the remote number. The subaddress is coded in NSAP format as octets. See isdnCallRemoteNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

isdnCallLocalNumber 1.3.6.1.4.1.272.4.2.4.1.11
The calling party number that was sent (with the outgoing call) or was received (with incoming calls). Refer to the isdnStkTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

isdnCallLocalSubaddress 1.3.6.1.4.1.272.4.2.4.1.12
The subaddress of the calling party number. See isdnCallRLocalNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

isdnCallServiceIndicator 1.3.6.1.4.1.272.4.2.4.1.13
Service indicator that was sent on the ISDN D-channel when the call was established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER telephony(1), ab-services(2), x21-services(3), fax-group4(4), btx(5), data-transfer(7), x25-services(8), facsimile64(9), mixed-mode(10), telecontrol(13), graphics-phone(14), teletex(15), video-phone(16)  

isdnCallAddInfo 1.3.6.1.4.1.272.4.2.4.1.14
Additional information that was sent on the ISDN D-channel when the call was established. Only sent/received when using the 1TR6 protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

isdnCallBC 1.3.6.1.4.1.272.4.2.4.1.15
Bearer Capability that was sent on the ISDN D-channel when the call was established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

isdnCallLLC 1.3.6.1.4.1.272.4.2.4.1.16
Low Layer Capability that was sent on the ISDN D-channel when the call was established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

isdnCallHLC 1.3.6.1.4.1.272.4.2.4.1.17
The number of charging ticks received since this connection was established. Actual charges can be computed by multiplying this value with the unit price (e.g. .12 DM in Germany). If you aren't receiving charging information for outgoing calls, verify with your local ISDN provider to make sure this option is being provided/is available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

isdnCallCharge 1.3.6.1.4.1.272.4.2.4.1.18
This object contains the charge for this call either as units or as 1/1000 of the respective currency. Which type of information is choosen, depends on the information provided by the ISDN service provide. See also ChargeInfo for textual information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnCallReceivedPackets 1.3.6.1.4.1.272.4.2.4.1.19
Count of received valid HDLC Frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnCallReceivedOctets 1.3.6.1.4.1.272.4.2.4.1.20
Count of received valid HDLC Octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnCallReceivedErrors 1.3.6.1.4.1.272.4.2.4.1.21
Count of received invalid HDLC Frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnCallTransmitPackets 1.3.6.1.4.1.272.4.2.4.1.22
Count of transmitted HDLC Frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnCallTransmitOctets 1.3.6.1.4.1.272.4.2.4.1.23
Count of transmitted Octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnCallTransmitErrors 1.3.6.1.4.1.272.4.2.4.1.24
Count of transmit errors (Collision, TX underrun).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnCallChargeInfo 1.3.6.1.4.1.272.4.2.4.1.25
Textual information of charge, i.e. 0.12 DM or 3 units
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

isdnCallScreening 1.3.6.1.4.1.272.4.2.4.1.26
Screening Indicator of the calling party number of incoming calls. The calling partys number (CPN) may be assigned either by the user placing the call or by the telephone switching station. If the CPN was assigned by the user the switching station may optionally verify the address. indicator: CPN assigned: verification: `user' by user none `user-verified' by user verification successful `user-failed' by user verification failed `network' by network none
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER user(1), user-verified(2), user-failed(3), network(4), undefined(5)  

isdnCallInfo 1.3.6.1.4.1.272.4.2.4.1.27
Additional information to identify the call
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

isdnDispatchTable 1.3.6.1.4.1.272.4.2.5
The isdnDispatchTable is the central distribution center for all incoming ISDN connections. Incoming ISDN connections are `dispatched' to a service (isdnDspItem) based on the calling party's number sent over the ISDN. Creating entries: Entries can be created by assigning a value to both the isdnDspStkNumber and isdnDspItem objects within one operation. Deleting entries: Entries are removed by setting the isdnDspItem to 'delete'.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnDispatchEntry

isdnDispatchEntry 1.3.6.1.4.1.272.4.2.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnDispatchEntry  

isdnDspStkNumber 1.3.6.1.4.1.272.4.2.5.1.1
The ISDN stack number for this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1..31  

isdnDspItem 1.3.6.1.4.1.272.4.2.5.1.2
The item to connect this call to. Routing tasks (IP, IPX, X.25, bridging, ...) should use the ppp(1). For the isdnlogin program use the login(2) item. For CAPI 1.1 programs, use items eaz0(48) .. eaz9(57).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ppp(1), login(2), delete(10), ppp-64k(11), ppp-56k(12), ppp-modem(13), ppp-dovb(14), ppp-v110-1200(15), ppp-v110-2400(16), ppp-v110-4800(17), ppp-v110-9600(18), ppp-v110-14400(19), ppp-v110-19200(20), ppp-v110-38400(21), ppp-x75(22), extern(24), pots(25), ppp-modem-profile-1(26), ppp-modem-profile-2(27), ppp-modem-profile-3(28), ppp-modem-profile-4(29), ppp-modem-profile-5(30), ppp-modem-profile-6(31), ppp-modem-profile-7(32), ppp-modem-profile-8(33), eaz0(48), eaz1(49), eaz2(50), eaz3(51), eaz4(52), eaz5(53), eaz6(54), eaz7(55), eaz8(56), eaz9(57), x25-pad(58), capi2(59)  

isdnDspLocalNumber 1.3.6.1.4.1.272.4.2.5.1.3
If the Called Party Number of the incoming call on the specified ISDN stack matches this value, the call is dispatched to the defined item. For outgoing calls from this item, the local number is sent as the Calling Party Number. Note: The matching of isdnDspLocalNumber value is done from right to left based on the number of digits in isdnDspLocalNumber. For example: if isdnDspLocalNumber is set to 124 then an incoming Called Party Number of 6501124 would match while one with 650024 would not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

isdnDspLocalSubaddress 1.3.6.1.4.1.272.4.2.5.1.4
If the Called Party Subaddress of the incoming call on the specified ISDN stack matches this value, the call is dispatched to the defined item. For outgoing calls from this item, the local subaddress is sent as the Calling Party Subaddress. Note: The matching of isdnDspLocalSubaddress values is done by comparing the entire string of numbers in the Called Party Subaddress field. For example: if issdnDspLocalSubaddress is set to 072522 then only calls with an incoming Called Party Subaddress of 072522 would match, i.e. one with 522 would not match.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

isdnDspBearer 1.3.6.1.4.1.272.4.2.5.1.5
The isdnDspBearer is used for dispatching different types of calls
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER any(1), data(2), voice(3)  

isdnDspSlot 1.3.6.1.4.1.272.4.2.5.1.6
Identification number of the used slot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

isdnDspUnit 1.3.6.1.4.1.272.4.2.5.1.7
Identification number of the used unit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

isdnDspDirection 1.3.6.1.4.1.272.4.2.5.1.8
Specifies whether the entry is to be used for outgoing calls, incoming calls or both.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2), both(3)  

isdnDspMode 1.3.6.1.4.1.272.4.2.5.1.9
This object specifies the matching direction for incoming calls. When set to right-to-left, the rightmost digits of the called address of an incoming call are compared against the LocalNumber. This is useful for normal basic rate interfaces without DDI, because only few last digits have to be specified to be unique. When set to left-to-right, the leftmost digits of an incoming call are compared against the LocalNumber. Only the latter mode may be used for direct dialing in (DDI).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER right-to-left(1), left-to-right(2)  

isdnDspUserName 1.3.6.1.4.1.272.4.2.5.1.10
The name of the user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

isdnDChanX31Table 1.3.6.1.4.1.272.4.2.6
The isdnDChanX31Table contains information for the X.31 stack for each available ISDN D-channel. This information is mainly used for X.25 packet-switching functions but can be used for CAPI applications. The table is initialized during the auto configure process. By default the system polls each D-channel for an assigned TEI (terminal endpoint identifier). Creating entries: Entries can be added by assigning a new value (valid IfIndex) to isdnX31IsdnIfIndex. Deleting entries: Entries are removed by assigning 'delete' to the approprate isdnX31IsdnAssignedTo object.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnDChanX31Entry

isdnDChanX31Entry 1.3.6.1.4.1.272.4.2.6.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnDChanX31Entry  

isdnX31IsdnIfIndex 1.3.6.1.4.1.272.4.2.6.1.1
The corresponding ISDN interface that is used for this call. Refer to the isdnIfTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnX31TeiProc 1.3.6.1.4.1.272.4.2.6.1.2
The procedure used for polling of TEI (terminal end-point identifiers) values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), fixed(2)  

isdnX31TeiValue 1.3.6.1.4.1.272.4.2.6.1.3
The TEI value for this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1..126  

isdnX31AssignedTo 1.3.6.1.4.1.272.4.2.6.1.5
The service this TEI value is assigned to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER packet-switch(1), capi-default(2), capi(3), delete(4)  

isdnAccountingTemplate 1.3.6.1.4.1.272.4.2.7
Specifies the format of accounting messages sent by the syslog protocol. The format can consist of any order of the following variables. Tag Meaning %S Date the connection opened; in DD.MM.YY format. %s Time the connection was established: in HH:MM:SS format %R Date the connection closed; in DD.MM.YY format. %r Time the connection was closed: in HH:MM:SS format. %d The duration of the connection in seconds. %D Call identification: internal/external, ID, slot/unit (PABX only) %P Call classification: Private/Business, project number (PABX only) %y Total number of bytes received over the connection. %Y Total number of bytes sent over the connection. %g Total packets received over the connection %G Total packets sent over the connection. %c Total number of charging units (value) incurred for the connection. %C Total number of charging units (string) incurred for the connection. %n The call's direction; either incoming (I) or outgoing (O). %Z The local address (Calling or Called party's number, see %n). %z The local subaddress (Calling or Called party's number, see %n). %T The remote address (Calling or Called party's number %n). %t The remote subaddress (Calling or Called party's number %n). %i Service indicator and additional information for the call. %b Bearer capability for the call. %l Low layer capability for the call. %h High layer capability for the call. %u DSS1 error cause, if applicable. %U 1tr6 error cause, if applicable. %L Local (internal) error cause. %F Call reference (internal). %e Calling extension (for call assiciation; PABX only) %I Information about the subsystem the call was given to. The default accounting template setting contains the following tags: %S,%s,%r,%d,%y,%Y,%g,%G,%C,%n,%Z,%T,%i,%u,%L,%I. This template produces accounting messages similar to the following. ISDN:18.08.1997,13:53:19,13:53:34,12,1096,1875,33,33,1Units,O,2,091196730,7/0,9F,0
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

isdnCallHistoryTable 1.3.6.1.4.1.272.4.2.8
The isdnCallHistoryTable contains information pertaining to the last 20 ISDN calls made, since the last system startup. Each call that appears in the isdnCallTable, will have its information stored here (temporarily), once it disconnects. Creating entries: Entries are added by the system once a call is disconnected. Deleting entries: Entries are removed by the system. The table is designed as a circular queue (or FIFO); the most calls are stored at inx 19 with older calls rolling off the top of the table at inx 00.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnCallHistoryEntry

isdnCallHistoryEntry 1.3.6.1.4.1.272.4.2.8.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnCallEntry  

isdnCallHistoryStkNumber 1.3.6.1.4.1.272.4.2.8.1.1
The number of the ISDN-Stack, this call went through.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

isdnCallHistoryType 1.3.6.1.4.1.272.4.2.8.1.2
The direction of the call, incoming or outgoing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2)  

isdnCallHistoryTime 1.3.6.1.4.1.272.4.2.8.1.3
The time the call was received (incoming) or was placed (outgoing).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Date  

isdnCallHistoryDuration 1.3.6.1.4.1.272.4.2.8.1.4
The duration of the call in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnCallHistoryIsdnIfIndex 1.3.6.1.4.1.272.4.2.8.1.5
The corresponding ISDN interface that this call used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnCallHistoryChannel 1.3.6.1.4.1.272.4.2.8.1.6
The corresponding B-channel on this ISDN interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

isdnCallHistoryDspItem 1.3.6.1.4.1.272.4.2.8.1.7
The item this call was connected to. Routing tasks (IP, IPX, X.25, bridging, ...) use ppp(1). The isdnlogin program uses login(2). CAPI 1.1 programs, use the items eaz0(48) .. eaz9(57) are used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ppp(1), login(2), undefined(10), ppp-64k(11), ppp-56k(12), ppp-modem(13), ppp-dovb(14), ppp-v110-1200(15), ppp-v110-2400(16), ppp-v110-4800(17), ppp-v110-9600(18), ppp-v110-14400(19), ppp-v110-19200(20), ppp-v110-38400(21), ppp-x75(22), extern(24), pots(25), ppp-modem-profile-1(26), ppp-modem-profile-2(27), ppp-modem-profile-3(28), ppp-modem-profile-4(29), ppp-modem-profile-5(30), ppp-modem-profile-6(31), ppp-modem-profile-7(32), ppp-modem-profile-8(33), eaz0(48), eaz1(49), eaz2(50), eaz3(51), eaz4(52), eaz5(53), eaz6(54), eaz7(55), eaz8(56), eaz9(57), x25-pad(58)  

isdnCallHistoryRemoteNumber 1.3.6.1.4.1.272.4.2.8.1.8
The ISDN number that was called (for outgoing calls) or was calling (for incoming calls).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

isdnCallHistoryRemoteSubaddress 1.3.6.1.4.1.272.4.2.8.1.9
The subaddress of the remote number. See isdnCall- HistoryRemoteNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

isdnCallHistoryLocalNumber 1.3.6.1.4.1.272.4.2.8.1.10
The calling party number that was sent (with the outgoing call) or was received (with incoming calls).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

isdnCallHistoryLocalSubaddress 1.3.6.1.4.1.272.4.2.8.1.11
The subaddress of the calling party number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

isdnCallHistoryServiceIndicator 1.3.6.1.4.1.272.4.2.8.1.12
Service indicator that was sent on the ISDN D-channel when the call was established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER telephony(1), ab-services(2), x21-services(3), fax-group4(4), btx(5), data-transfer(7), x25-services(8), facsimile64(9), mixed-mode(10), telecontrol(13), graphics-phone(14), teletex(15), video-phone(16)  

isdnCallHistoryAddInfo 1.3.6.1.4.1.272.4.2.8.1.13
Additional information that was sent on the ISDN D-channel when the call was established. Only sent/received when using the 1TR6 protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

isdnCallHistoryBC 1.3.6.1.4.1.272.4.2.8.1.14
Bearer Capability that was sent on the ISDN D-channel when the call was established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

isdnCallHistoryLLC 1.3.6.1.4.1.272.4.2.8.1.15
Low Layer Capability that was sent on the ISDN D-channel when the call was established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

isdnCallHistoryHLC 1.3.6.1.4.1.272.4.2.8.1.16
High Layer Capability that was sent on the ISDN D-channel when the call was established.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

isdnCallHistoryCharge 1.3.6.1.4.1.272.4.2.8.1.17
The number of charging ticks received for this connection. Actual charges can be computed by multiplying this value with the unit price, e.g. .12 DM in Germany. If you aren't receiving charging information for outgoing calls, verify with your local ISDN provider to make sure this option being provided/is available. As an option, this Object may contain the charge measured in 1/1000 of the respective currency. See also ChargeInfo for textual information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnCallHistoryDSS1Cause 1.3.6.1.4.1.272.4.2.8.1.18
ISDN error condition reported by the DSS1 protocol, for Euro ISDN. See Appendix C in the User's Guide.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexValue  

isdnCallHistory1TR6Cause 1.3.6.1.4.1.272.4.2.8.1.19
ISDN error condition reported by the 1TR6 protocol, for National ISDN in Germany. See Appendix C in the User's Guide.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexValue  

isdnCallHistoryLocalCause 1.3.6.1.4.1.272.4.2.8.1.20
ISDN error condition reported by the system locally. See Appendix C in the User's Guide.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknownprim(1), outstate(2), iemissing(3), ienotallowed(4), look(5), nolink(6), nocallref(7), nomem(8), notready(9), busy(10), chanbusy(11), l3timer(12), l3restart(13), l3error(14), l1error(15), nocontrl(16)  

isdnCallHistoryChargeInfo 1.3.6.1.4.1.272.4.2.8.1.21
Textual information of charge, i.e. 0.12 DM or 3 units
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

isdnCallHistoryScreening 1.3.6.1.4.1.272.4.2.8.1.22
Screening Indicator of the calling party number of incoming calls. The calling partys number (CPN) may be assigned either by the user placing the call or by the telephone switching station. If the CPN was assigned by the user the switching station may optionally verify the address. indicator: CPN assigned: verification: `user' by user none `user-verified' by user verification successful `user-failed' by user verification failed `network' by network none
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER user(1), user-verified(2), user-failed(3), network(4), undefined(5)  

isdnCallHistoryInfo 1.3.6.1.4.1.272.4.2.8.1.23
Additional information to identify the call
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

isdnCallHistoryReceivedPackets 1.3.6.1.4.1.272.4.2.8.1.24
Count of received valid HDLC Frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnCallHistoryReceivedOctets 1.3.6.1.4.1.272.4.2.8.1.25
Count of received valid HDLC Octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnCallHistoryReceivedErrors 1.3.6.1.4.1.272.4.2.8.1.26
Count of received invalid HDLC Frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnCallHistoryTransmitPackets 1.3.6.1.4.1.272.4.2.8.1.27
Count of transmitted HDLC Frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnCallHistoryTransmitOctets 1.3.6.1.4.1.272.4.2.8.1.28
Count of transmitted Octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnCallHistoryTransmitErrors 1.3.6.1.4.1.272.4.2.8.1.29
Count of transmit errors (Collision, TX underrun).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

isdnLoginOnPPPDispatch 1.3.6.1.4.1.272.4.2.9
Allows or disallows incoming ISDN calls (with an ISDN service indicator of 'telephony'), to be connected to the isdnlogin daemon even though the call has a matching service in the isdnDispatchTable (isdnDspItem). These calls must be initiated using isdnlogin telephony.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER allow(1), disallow(2)  

isdnHistoryMaxEntries 1.3.6.1.4.1.272.4.2.10
Maximum number of isdnCallHistory entries in memory.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

isdnloginAllowTable 1.3.6.1.4.1.272.4.2.11
The isdnloginAllowTable contains information about the ISDN partners that are allowed to login to the BRICK via the isdnlogin service. ISDN callers are identified by their calling partner number. Incoming isdnlogin requests can be restricted to single ISDN stacks. If this table is empty all calls given to the isdnlogind, are accepted. (Note that the isdnDispatchTable is consulted first.) Creating entries: Entries are created by assigning a value to the isdnloginAllowStkNumber object. Deleting entries: An entry can be removed by assigning the value `delete' to its isdnloginAllowScreening object.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnloginAllowEntry

isdnloginAllowEntry 1.3.6.1.4.1.272.4.2.11.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnloginAllowEntry  

isdnloginAllowStkNumber 1.3.6.1.4.1.272.4.2.11.1.1
The number of the ISDN stack, that accepts incoming isdnlogin calls. Refer to the isdnStkTable. The value `-1' matches all available stacks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1..31  

isdnloginAllowRemoteNumber 1.3.6.1.4.1.272.4.2.11.1.2
The number of the ISDN partner that is allowed to login via isdnlogin through the corresponding ISDN Stack. The wildcards '*', '?', '[', ']', '{', '}' may be used. See isdnCallRemoteNumber.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

isdnloginAllowRemoteSubaddress 1.3.6.1.4.1.272.4.2.11.1.3
The subaddress of the remote number. The subaddress is coded in NSAP format as octets. See isdnloginAllowRemoteNumber.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

isdnloginAllowScreening 1.3.6.1.4.1.272.4.2.11.1.4
The screening indicator of the calling party number (CPN). The isdnloginAllowScreening field can be used to gauge the `trustworthiness' of the CPN field (see isdnCallScreening). Indicators are ordered from highest to lowest as follows: indicator: CPN assigned: verification: `network' by network none `user-verified' by user verification successful `user' by user none `user-failed' by user verification failed Set this field to `dont-care' to accept all calls. Set this field to `delete' to delete this entry. Otherwise calls are accepted only if the screening indicator matches or is higher than the set value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER user(1), user-verified(2), user-failed(3), network(4), dont-care(5), delete(6)  

isdnCreditsTable 1.3.6.1.4.1.272.4.2.12
The isdnCreditsTable contains informations about current used resources and maximum allowed resources for each during a specified interval subsystem. Creating entries: Entries are added by the system during startup. Deleting entries: Is not possible.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IsdnCreditsEntry

isdnCreditsEntry 1.3.6.1.4.1.272.4.2.12.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IsdnCreditsEntry  

isdnCreditsSubsysNumber 1.3.6.1.4.1.272.4.2.12.1.1
Type of Subsystem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ppp(1), capi(2), isdnlogin(3), pots(4), doorintercom(5)  

isdnCreditsSurveillance 1.3.6.1.4.1.272.4.2.12.1.2
Surveillance on or off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

isdnCreditsMeasuretime 1.3.6.1.4.1.272.4.2.12.1.3
Time of one observation interval in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnCreditsMaxInCon 1.3.6.1.4.1.272.4.2.12.1.4
Maximum number of allowed incoming connections during the observation interval. -1 disables this limit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnCreditsMaxOutCon 1.3.6.1.4.1.272.4.2.12.1.5
Maximum number of allowed outgoing connections during the observation interval. -1 disables this limit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnCreditsMaxCharge 1.3.6.1.4.1.272.4.2.12.1.6
Maximum allowed charge amount during the observation interval. -1 disables this limit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnCreditsMaxInDuration 1.3.6.1.4.1.272.4.2.12.1.7
Maximum connect time for incoming connections in seconds during the observation interval. -1 disables this limit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnCreditsMaxOutDuration 1.3.6.1.4.1.272.4.2.12.1.8
Maximum connect time for outgoing connections in seconds during the observation interval. -1 disables this limit
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnCreditsTimeleft 1.3.6.1.4.1.272.4.2.12.1.9
Time in seconds left in current interval. Writing to Timeleft will restart the observation interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnCreditsCurrentInCon 1.3.6.1.4.1.272.4.2.12.1.10
Current number of incoming connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnCreditsCurrentOutCon 1.3.6.1.4.1.272.4.2.12.1.11
Current number of outgoing connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnCreditsTotalInCon 1.3.6.1.4.1.272.4.2.12.1.12
Total count of incoming connections during the observation interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnCreditsTotalOutCon 1.3.6.1.4.1.272.4.2.12.1.13
Total count of outgoing connections during the observation interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnCreditsTotalMaxCon 1.3.6.1.4.1.272.4.2.12.1.14
Maximum number of simultaniously established connections during the observation interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnCreditsTotalCharge 1.3.6.1.4.1.272.4.2.12.1.15
Total accounted charge during the observation interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnCreditsTotalInDuration 1.3.6.1.4.1.272.4.2.12.1.16
Total connect time of incoming connections during the observation interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnCreditsTotalOutDuration 1.3.6.1.4.1.272.4.2.12.1.17
Total connect time of outgoing connections during the observation interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

isdnCreditsMaxCurrentInCon 1.3.6.1.4.1.272.4.2.12.1.18
Maximum number of currently allowed incoming connections. -1 disables this limit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnCreditsMaxCurrentOutCon 1.3.6.1.4.1.272.4.2.12.1.19
Maximum number of currently allowed outgoing connections. -1 disables this limit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnCreditsMaxCurrentCon 1.3.6.1.4.1.272.4.2.12.1.20
Maximum number of currently allowed connections in both directions. -1 disables this limit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

isdnIfSlips 1.3.6.1.4.1.272.4.2.1.1.21
Slip conditions detected since startup. Flags that the frequency of receive clock is different than frequency of internal system clock.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter