BICC-TrmSvr

File: BICC-TrmSvr.mib (191527 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB

Imported symbols

enterprises Counter IpAddress
TimeTicks OBJECT-TYPE DisplayString

Defined Types

Character  
INTEGER 0..255    

DisplayChar  
INTEGER 32..126    

LtGroupList  
OCTET STRING    

VPortEntry  
SEQUENCE    
  vPortIndex INTEGER
  vPortType INTEGER
  vPortName DisplayString
  vPortUserName DisplayString
  vPortState INTEGER
  vPortLogout INTEGER
  vPortActiveSessions INTEGER
  vPortCurrSessNumber INTEGER
  vPortCurrSessProt OBJECT IDENTIFIER
  vPortAccess INTEGER
  vPortVirtualEnable INTEGER
  vPortVirtualString OCTET STRING
  vPortSessionLimit INTEGER
  vPortProfile DisplayString
  vPortQueueing INTEGER
  vPortPasswordEnable INTEGER
  vPortTacacsEnable INTEGER
  vPortSecurity INTEGER
  vPortGroups LtGroupList
  vPortBreakMode INTEGER
  vPortBackSwitch Character
  vPortForwSwitch Character
  vPortLocalSwitch Character
  vPortPrefSvc DisplayString
  vPortPrefNode DisplayString
  vPortPrefPort DisplayString
  vPortPrefMode INTEGER
  vPortAutoConnect INTEGER
  vPortPrompt DisplayString
  vPortInactiveLogout INTEGER
  vPortAutoPrompt INTEGER
  vPortBroadcastEnable INTEGER
  vPortInterrupts INTEGER
  vPortMessageCodes INTEGER
  vPortVerification INTEGER
  vPortDialup INTEGER
  vPortRemoteModify INTEGER
  vPortAbsoluteLogout INTEGER
  vPortIOflush INTEGER
  vPortLogoutMsgEnable INTEGER
  vPortScreenType INTEGER
  vPortFlowType INTEGER
  vPortInFlowState INTEGER
  vPortOutFlowState INTEGER
  vPortCTSstate INTEGER
  vPortDSRstate INTEGER
  vPortDCDstate INTEGER
  vPortDTRstate INTEGER
  vPortRIstate INTEGER
  vPortRTSstate INTEGER
  vPortSpeed INTEGER
  vPortCharSize INTEGER
  vPortParityType INTEGER
  vPortAutobaud INTEGER
  vPortModemControl INTEGER
  vPortDSRlogout INTEGER
  vPortRing INTEGER
  vPortDTRwait INTEGER
  vPortSignalCheckEnable INTEGER
  vPortHandshake INTEGER
  vPortRcvChars Counter
  vPortTrnChars Counter
  vPortFrameErrs Counter
  vPortOverrunErrs Counter
  vPortParityErrs Counter
  vPortCharsDropped Counter

VSvcEntry  
SEQUENCE    
  vSvcName DisplayString
  vSvcPorts OCTET STRING
  vSvcIdent DisplayString
  vSvcRating INTEGER
  vSvcLtEnable INTEGER
  vSvcTelEnable INTEGER
  vSvcLprEnable INTEGER
  vSvcRawEnable INTEGER
  vSvcVirtualEnable INTEGER
  vSvcVirtualText OCTET STRING
  vSvcConnectEnable INTEGER
  vSvcPassword DisplayString
  vSvcQueueEnable INTEGER
  vSvcIpAddr IpAddress
  vSvcTcpPort INTEGER
  vSvcProfile DisplayString
  vSvcStatus INTEGER

VProfEntry  
SEQUENCE    
  vProfName DisplayString
  vProfDomain DisplayString
  vProfConcatenate INTEGER
  vProfPermHostOnly INTEGER
  vProfTcpPort INTEGER
  vProfTcpTimeout INTEGER
  vProfTcpKeepalive INTEGER
  vProfIpTTL INTEGER
  vProfIpPrecedence INTEGER
  vProfTermType DisplayString
  vProfCrToNet OCTET STRING
  vProfCrFromTerm OCTET STRING
  vProfPadChar Character
  vProfPadLength INTEGER
  vProfEndRecord Character
  vProfNop Character
  vProfDataMark Character
  vProfBreak Character
  vProfIntProcess Character
  vProfAbortOutput Character
  vProfAttention Character
  vProfEraseChar Character
  vProfEraseLine Character
  vProfGoAhead Character
  vProfNullPass INTEGER
  vProfLocalEcho INTEGER
  vProfRemoteEcho INTEGER
  vProfLocalBinary INTEGER
  vProfRemoteBinary INTEGER
  vProfStatus INTEGER

VSecEntry  
SEQUENCE    
  vSecIndex INTEGER
  vSecAddress IpAddress
  vSecMask IpAddress
  vSecGroups LtGroupList
  vSecStatus INTEGER

VHostEntry  
SEQUENCE    
  vHostHostname DisplayString
  vHostAddress IpAddress
  vHostTTL INTEGER
  vHostStatus INTEGER

VNsEntry  
SEQUENCE    
  vNsAddress IpAddress
  vNsHostname DisplayString
  vNsTTL TimeTicks
  vNsStatus INTEGER

VTacEntry  
SEQUENCE    
  vTacAddress IpAddress
  vTacHostname DisplayString
  vTacStatus INTEGER

VTelSessEntry  
SEQUENCE    
  vTelSessPortIndex INTEGER
  vTelSessIndex INTEGER
  vTelSessOrigin INTEGER
  vTelSessState INTEGER
  vTelSessDisconnect INTEGER
  vTelSessLocalAddr IpAddress
  vTelSessLocalTcpPort INTEGER
  vTelSessRemAddr IpAddress
  vTelSessRemTcpPort INTEGER
  vTelSessCrToNet OCTET STRING
  vTelSessCrFromTerm OCTET STRING
  vTelSessPadChar Character
  vTelSessPadLength INTEGER
  vTelSessUserTimeout INTEGER
  vTelSessKeepalive INTEGER
  vTelSessIpTTL INTEGER
  vTelSessIpPrecedence INTEGER
  vTelSessEndRecord Character
  vTelSessNop Character
  vTelSessDataMark Character
  vTelSessBreak Character
  vTelSessIntProcess Character
  vTelSessAbortOutput Character
  vTelSessAttention Character
  vTelSessEraseChar Character
  vTelSessEraseLine Character
  vTelSessGoAhead Character
  vTelSessNullPass INTEGER
  vTelSessTermType DisplayString
  vTelSessLocalEcho INTEGER
  vTelSessRemoteEcho INTEGER
  vTelSessLocalBinary INTEGER
  vTelSessRemoteBinary INTEGER

VRlogSessEntry  
SEQUENCE    
  vRlogSessPortIndex INTEGER
  vRlogSessIndex INTEGER
  vRlogSessOrigin INTEGER
  vRlogSessState INTEGER
  vRlogSessDisconnect INTEGER
  vRlogSessLocalAddr IpAddress
  vRlogSessLocalTcpPort INTEGER
  vRlogSessRemAddr IpAddress
  vRlogSessRemTcpPort INTEGER
  vRlogSessTermType DisplayString

VLtSessEntry  
SEQUENCE    
  vLtSessPortIndex INTEGER
  vLtSessIndex INTEGER
  vLtSessOrigin INTEGER
  vLtSessState INTEGER
  vLtSessDisconnect INTEGER
  vLtSessSvcName DisplayString
  vLtSessNodeName DisplayString
  vLtSessDestName DisplayString

VQueEntry  
SEQUENCE    
  vQueEntryNumber INTEGER
  vQueSvcName DisplayString
  vQueNodeName DisplayString
  vQuePortName DisplayString
  vQueStatus INTEGER

VSnmpTrapDestEntry  
SEQUENCE    
  vSnmpTrapDestAddr IpAddress
  vSnmpTrapDestCommunity INTEGER
  vSnmpTrapDestColdEnable INTEGER
  vSnmpTrapDestAuthEnable INTEGER
  vSnmpTrapDestStatus INTEGER

Defined Values

bicc 1.3.6.1.4.1.170
OBJECT IDENTIFIER    

bdn 1.3.6.1.4.1.170.1
OBJECT IDENTIFIER    

devices 1.3.6.1.4.1.170.1.1
OBJECT IDENTIFIER    

terminal-server 1.3.6.1.4.1.170.1.1.2
OBJECT IDENTIFIER    

port 1.3.6.1.4.1.170.1.1.2.1
OBJECT IDENTIFIER    

server 1.3.6.1.4.1.170.1.1.2.2
OBJECT IDENTIFIER    

service 1.3.6.1.4.1.170.1.1.2.3
OBJECT IDENTIFIER    

slot 1.3.6.1.4.1.170.1.1.2.4
OBJECT IDENTIFIER    

serverAdmin 1.3.6.1.4.1.170.1.1.2.5
OBJECT IDENTIFIER    

serverMibs 1.3.6.1.4.1.170.1.1.2.6
OBJECT IDENTIFIER    

serverDevice 1.3.6.1.4.1.170.1.1.2.5.1
OBJECT IDENTIFIER    

vcpServerDevice 1.3.6.1.4.1.170.1.1.2.5.1.1
OBJECT IDENTIFIER    

serverProtocol 1.3.6.1.4.1.170.1.1.2.5.2
OBJECT IDENTIFIER    

protNone 1.3.6.1.4.1.170.1.1.2.5.2.1
OBJECT IDENTIFIER    

protTelnet 1.3.6.1.4.1.170.1.1.2.5.2.2
OBJECT IDENTIFIER    

protRlogin 1.3.6.1.4.1.170.1.1.2.5.2.3
OBJECT IDENTIFIER    

protLt 1.3.6.1.4.1.170.1.1.2.5.2.4
OBJECT IDENTIFIER    

vcpServerMib 1.3.6.1.4.1.170.1.1.2.6.1
OBJECT IDENTIFIER    

vcpSystem 1.3.6.1.4.1.170.1.1.2.6.1.1
OBJECT IDENTIFIER    

vcpPort 1.3.6.1.4.1.170.1.1.2.6.1.2
OBJECT IDENTIFIER    

vcpService 1.3.6.1.4.1.170.1.1.2.6.1.3
OBJECT IDENTIFIER    

vcpProfile 1.3.6.1.4.1.170.1.1.2.6.1.4
OBJECT IDENTIFIER    

vcpIpSecurity 1.3.6.1.4.1.170.1.1.2.6.1.5
OBJECT IDENTIFIER    

vcpHostname 1.3.6.1.4.1.170.1.1.2.6.1.6
OBJECT IDENTIFIER    

vcpNameserver 1.3.6.1.4.1.170.1.1.2.6.1.7
OBJECT IDENTIFIER    

vcpTacacs 1.3.6.1.4.1.170.1.1.2.6.1.8
OBJECT IDENTIFIER    

vcpIp 1.3.6.1.4.1.170.1.1.2.6.1.9
OBJECT IDENTIFIER    

vcpArp 1.3.6.1.4.1.170.1.1.2.6.1.10
OBJECT IDENTIFIER    

vcpTcp 1.3.6.1.4.1.170.1.1.2.6.1.11
OBJECT IDENTIFIER    

vcpTelnet 1.3.6.1.4.1.170.1.1.2.6.1.12
OBJECT IDENTIFIER    

vcpRlogin 1.3.6.1.4.1.170.1.1.2.6.1.13
OBJECT IDENTIFIER    

vcpLt 1.3.6.1.4.1.170.1.1.2.6.1.14
OBJECT IDENTIFIER    

vcpQueue 1.3.6.1.4.1.170.1.1.2.6.1.15
OBJECT IDENTIFIER    

vcpSnmp 1.3.6.1.4.1.170.1.1.2.6.1.16
OBJECT IDENTIFIER    

vSysIdentifier 1.3.6.1.4.1.170.1.1.2.6.1.1.1
A unique identifier of the server type. The OID is one of those found under { serverDevice }, such as { vcpServerDevice }.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

vSysReboot 1.3.6.1.4.1.170.1.1.2.6.1.1.2
A control to reinitialize the server. In response to a get-request or get-next-request, the agent always returns 'ready(1)' as the value. Setting the value to 'execute(2)' causes the server to reboot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

vSysLtGroupStatus 1.3.6.1.4.1.170.1.1.2.6.1.1.3
An integer indicating whether the vcpLt group is implemented on this particular unit. That entire group has a status of optional, as some software configurations executing in a server unit may not implement the group. For example, the group is not implemented in a unit which is configured without the Lat-compatible protocol, and in this case the value of vSysLtGroupStatus is absent(2). This variable gives management stations an easy way to determine whether the group is implemented in the particular unit being managed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER present(1), absent(2)  

vSysPrimaryBoot 1.3.6.1.4.1.170.1.1.2.6.1.1.4
The primary boot method of the server. This boot method is attempted first on system re-initialization.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rom(1), mop(2), bootp(3), tftp(4), card(5)  

vSysSecondaryBoot 1.3.6.1.4.1.170.1.1.2.6.1.1.5
The secondary boot method of the server. This boot method is attempted on system re-initialization when the primary boot method fails.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rom(1), mop(2), bootp(3), tftp(4), card(5), none(6)  

vSysBootFilePath 1.3.6.1.4.1.170.1.1.2.6.1.1.6
The pathname on the remote boot host of the server's boot file for boot through TFTP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

vSysBootFileName 1.3.6.1.4.1.170.1.1.2.6.1.1.7
The filename of the server's boot file for boot through MOP, TFTP, or Card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..9)  

vSysBootServer 1.3.6.1.4.1.170.1.1.2.6.1.1.8
The IP address of the boot server for boot through TFTP or BOOTP. A value of '0.0.0.0' (on read or write) indicates that no boot server is defined.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vSysRemoteBoot 1.3.6.1.4.1.170.1.1.2.6.1.1.9
Indicates whether this server will supply system software as a boot image for remote servers when they request a network boot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vSysEtherType 1.3.6.1.4.1.170.1.1.2.6.1.1.10
Selects the operating ethernet interface. 'autoSelect(1)' indicates that the server will automatically select an interface by identifying that interface showing network activity. Note that the server must be rebooted before a change in the value of this variable actually takes effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER autoSelect(1), thinWire(2), thickWire(3), tenBaseT(4)  

vSysBroadband 1.3.6.1.4.1.170.1.1.2.6.1.1.11
Determines whether or not the server is configured to interface with with broadband network tranceivers. Note that the server must be rebooted before a change in the value of this variable actually takes effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vSysPasswordLimit 1.3.6.1.4.1.170.1.1.2.6.1.1.12
Determines the number of times the server will allow a user to mistype a local password, either to login to a port or connect to a local service, before refusing the login attempt. The value 0 indicates infinite password attempts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..250  

vSysPrivPassword 1.3.6.1.4.1.170.1.1.2.6.1.1.13
The password required for users to enter privileged mode, and have access to privileged commands. Note that on a set-request, the new value is automatically converted to upper-case, as is the user password input.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..6)  

vSysMaintenancePassword 1.3.6.1.4.1.170.1.1.2.6.1.1.14
The password required for access to the server remote console port through the MOP network protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8)  

vPortBroadcast 1.3.6.1.4.1.170.1.1.2.6.1.2.1
Determines whether or not port users may broadcast text directly to other ports, using the local 'BROADCAST' command.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortInactivityTimer 1.3.6.1.4.1.170.1.1.2.6.1.2.2
The number of minutes that may pass with no port activity before that port is automatically logged out, if the port's inactivity logout feature is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..120  

vPortAbsoluteTimer 1.3.6.1.4.1.170.1.1.2.6.1.2.3
The number of minutes that may pass with no port activity before that port is automatically logged out, if the port's absolute logout feature is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1439  

vPortLock 1.3.6.1.4.1.170.1.1.2.6.1.2.4
Determines whether or not the server will allow a user to lock a port using the local 'LOCK' command.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortLoginPassword 1.3.6.1.4.1.170.1.1.2.6.1.2.5
The password required for users to login ports with vPortPasswordEnable = 'enabled(1)'. On a set-request the agent converts lower case ASCII characters to upper case for this object, because the user's password input is also converted before comparison.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..6)  

vPortConsoleIndex 1.3.6.1.4.1.170.1.1.2.6.1.2.6
The value of vPortIndex for the port which is serving as the local console port. Abnormal event messages are automatically directed to the local console port. A value of 0 indicates that console messages are disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vPortFailover 1.3.6.1.4.1.170.1.1.2.6.1.2.7
Determines whether or not the port failover feature is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortSignalCheck 1.3.6.1.4.1.170.1.1.2.6.1.2.8
Determines whether or not the port signal check feature can be enabled for individual ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortLoginMsgEnable 1.3.6.1.4.1.170.1.1.2.6.1.2.9
Determines whether or not the server prints an introductory login message to the user when the user completes a login to a port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortBreakDuration 1.3.6.1.4.1.170.1.1.2.6.1.2.10
Determines the length, in milliseconds, of a BREAK when transmitted from a physical port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..200  

vPortXoffMark 1.3.6.1.4.1.170.1.1.2.6.1.2.11
Determines the number of free bytes in a port input buffer at which point the port will XOFF the attached device. When set, the new value will not take effect until the server is re-initialized.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..510  

vPortXonMark 1.3.6.1.4.1.170.1.1.2.6.1.2.12
Determines the number of used bytes in a port input buffer at which point the port will XON the attached device. When set, the new value will not take effect until the server is re-initialized.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..510  

vPortNumber 1.3.6.1.4.1.170.1.1.2.6.1.2.13
An integer indicating the number of entries in vPortTable. This value cannot change from one re-initialization of the unit to the next re-initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vPortTable 1.3.6.1.4.1.170.1.1.2.6.1.2.14
A list of port entries. The number of entries is given by the value of vPortNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VPortEntry

vPortEntry 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1
Status and parameter values for a port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VPortEntry  

vPortIndex 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.1
A unique value for each port. Its value ranges between 1 and the value of vPortNumber. The value for each port will remain constant at least from one re-initialization of the unit's network management system to the next re-initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vPortType 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.2
An integer indicating the type of the port. Virtual ports should be considered communication channels to their particular interface. For example, a virtualX25(7) port is a channel to an X.25 interface for establishing connections to/from that interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), physicalRS-232(2), physicalRS-423(3), physicalModem(4), physicalLCDPanel(5), virtualConsole(6), virtualNPT(7), virtualX25(8), virtual3270(9)  

vPortName 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.3
A textual name for the port. This name is used in LAT-compatible session start requests, where a device can request to be connected to a port with a given name. On a set-request the agent converts lower case ASCII characters to upper case for this object. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..16)  

vPortUserName 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.4
The textual username typed in by the user who logged into the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

vPortState 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.5
The current operational state of the port. 'idle(2)' indicates that the port has no sessions and is logged out. 'local(3)' indicates that the port is currently in local server mode, although suspended sessions may exist on the port. 'connecting(4)' indicates that the server is attempting to connect the port to a session. 'connected(5) indicates that the port is currently connected to a protocol session. 'locked(6)' indicates that the port has been locked by a local LOCK command and is awaiting the unlock password. 'serial-interface(7)' indicates that the port is acting as an interface for a serial link controlled by SLIP, PPP, etc.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), idle(2), local(3), connecting(4), connected(5), locked(6), serial-interface(7)  

vPortLogout 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.6
A control to logout a port. In response to a get-request or get-next-request, the agent always returns 'ready(1)' as the value. Setting the value to 'execute(2)' causes all sessions on the port to be disconnected and the port is returned to idle state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

vPortActiveSessions 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.7
The number of presently active sessions on the port, whether current or suspended.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vPortCurrSessNumber 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.8
The reference number of the port's current session. There is a unique non-zero reference number for each session on a port. The reference number stays constant for the life of the session. It can be used in conjunction with vPortIndex to index into the appropriate session table for retrieval of session information (vTelSessTable, vLtSessTable, or vRlogSessTable). If there are no sessions on the port, or if none of them is current, this object will have the value 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vPortCurrSessProt 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.9
An identifier of which higher-level protocol the current port session is running over. The possibilities are { protNone } (for no current session, or unknown), { protTelnet }, { protRlogin }, or { protLt }.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

vPortAccess 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.10
An indication of the allowed types of access to the port. 'local(1)' indicates that the port can only carry sessions initiated by it. 'remote(2)' indicates that the port can only accept connections initiated by another entity. 'dynamic(3)' indicates that the port can both initiate sessions and accept connections initiated by another entity. 'none(4)' indicates that the port can not pass any characters, and can neither initiate nor accept connections. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local(1), remote(2), dynamic(3), none(4)  

vPortVirtualEnable 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.11
An indication of the current setting of the port's virtual characteristic. This parameter affects the port's actions when connections are established. Refer to the user manual for a complete description of this parameter. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortVirtualString 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.12
An indication of the current setting of the port's virtual text string. This parameter affects the port's actions when connections are established. Refer to the user manual for a complete description of this parameter. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..112)  

vPortSessionLimit 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.13
The maximum number of simultaneous sessions allowed on the port. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..10  

vPortProfile 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.14
The name of the profile in use for the port. The profile contains session parameter information for Telnet and Rlogin. When the port initiates a Telnet or Rlogin session, the parameters to be used for that session are taken from the port's profile. vPortProfilename can be used to index into the profile table and retrieve/modify the relevant parameters. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

vPortQueueing 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.15
An indication of whether the LAT-compatible protocol will request session queueing when attempting to establish a session initiated at this port. If queueing is requested, a remote node will queue the connection request in the case of resource failures and accept the session when it is able. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortPasswordEnable 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.16
An indication of whether the system password must be entered to login to the port. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortTacacsEnable 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.17
An indication of whether the username and password entered at login must be verified by a Tacacs server before port access is permitted. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortSecurityEnable 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.18
An indication of whether the port security feature is enabled. Ports for which security is enabled are allowed to execute only a limited subset of the available local commands. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortGroups 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.19
Indicates which LAT-compatible groups are authorized and currently enabled on the port. There are 256 possible LAT-compatible groups (0-255). Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  LtGroupList  

vPortBreakMode 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.20
An indication of how a BREAK is interpreted when received at the port as input. 'local(1)' indicates that a received BREAK causes any current session to be suspended and the port returned to local mode. If there is no current session, the BREAK causes any port output in progress to be aborted. 'remote(2)' indicates that a received BREAK is passed through the current session to the other side via a protocol-specific mechanism. If there is no current session, the BREAK causes any port output in progress to be aborted. 'disabled(3)' indicates that all received BREAKs are ignored. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local(1), remote(2), disabled(3)  

vPortBackSwitch 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.21
A 'hot' key which, when received at the port's input, causes the current session to be changed to the immediately preceding session (from session 3 to session 2, for example). A value of 0 means that no backwards switch is in effect. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vPortForwSwitch 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.22
A 'hot' key which, when received at the port's input, causes the current session to be changed to the next numerical session (from session 3 to session 4, for example). A value of 0 means that no forwards switch is in effect. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vPortLocalSwitch 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.23
A 'hot' key which, when received at the port's input, forces the port to suspend any current session and return to local mode. If no current session exists, any port output currently in progress is aborted. A value of 0 means that no local switch is in effect. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vPortPrefSvc 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.24
A string defining the port's preferred service. A user at the port does not need to specify the service name (or node address) to connect to the service, he simply executes the connect command. Alternately, the port may connect to this service immediately upon being logged in from an idle state. The exact mode of operation depends on the setting of vPortPrefMode. A zero-length value for this object means that no preferred service is in effect. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

vPortPrefNode 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.25
A string defining the node name for the port's preferred service. Multiple LAT-compatible nodes may offer the same service name. This object defines which node is the preferred choice for the port. A zero-length value for this object means that no preferred node is in effect. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

vPortPrefPort 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.26
A string defining the port name for the port's preferred service. For LAT-compatible services this string identifies the LAT-compatible port name of the desired destination. For IP hosts this string defines the desired TCP port number. A zero-length value means that no preferred port is in effect. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

vPortPrefMode 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.27
An indication of the mode of preferred service connection. 'preferred(2)' indicates the 'preferred' mode of connection. In this mode users may break back to local mode by means of the BREAK key or a defined local switch. 'dedicated(3)' indicates that the port cannot function in local mode at all. It is dedicated to the specified service. Once the service connection is broken, the port is logged out. When the port is logged in, it immediately connects to the dedicated service. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dedicated(1), preferred(2)  

vPortAutoConnect 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.28
A port characteristic which, when enabled, causes the port to automatically attempt to re-establish any connection which is abnormally terminated, such as by network media failure. If a preferred service is also defined, the port will automatically attempt connection to the preferred service upon login. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortPrompt 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.29
The prompt string for the port when it is in local mode. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

vPortInactiveLogout 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.30
A port characteristic which, when enabled, causes the port to automatically become logged out if it has no active sessions and no data has been received or transmitted at the port for the duration of the vSysInactivityTimer. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortAutoPrompt 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.31
A port characteristic which, when enabled, causes the LAT-compatible service prompt to appear at the port immediately upon connecting to a LAT-compatible service. Many LAT-compatible services do not supply a prompt until a carriage return is encountered. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortBroadcastEnable 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.32
A port characteristic which, when enabled, allows characters broadcast from other server ports to appear at the port. If disabled, such broadcasts are not permitted to the particular port. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortInterrupts 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.33
A port characteristic which, when enabled, allows a remote connection to the port to be interrupted by a local user by means of the BREAK key. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortMessageCodes 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.34
A port characteristic which, when enabled, causes a message code reference number to be generated along with any port status or error messages. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortVerification 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.35
A port characteristic which, when enabled, causes a status message to appear on each connection attempt by the port. The status message indicates success or failure of the connection and provides the session number of the newly established session. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortDialup 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.36
A port characteristic which, when enabled, causes the server to identify that the port is configured for modem dial-in service when it connects to a LAT-compatible service. This may cause the service to initiate any security features it chooses to verify the authority or source of the connecting user. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortRemoteModify 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.37
A port characteristic which, when enabled, causes the server to allow modification of local port parameters (speed, character size, parity, etc.) from the remote end of the connection through protocol-specific means. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortAbsoluteLogout 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.38
A port characteristic which, when enabled, causes the port to automatically become logged out if no data has been received or transmitted at the port for the duration of the vSysAbsoluteTimer, regardless of the presence of suspended sessions on the port. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortIOflush 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.39
A port characteristic which, when enabled, causes the server to automatically flush the port's output buffer when the port becomes logged out. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortLogoutMsgEnable 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.40
A port characteristic which, when enabled, causes the port to print a message whenever it becomes logged out. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vPortScreenType 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.41
A port characteristic which determines the type of output device connected to the port, and therefore determines the output data formatting used for server configuration and statistics screens. 'ansi(1)' indicates that ANSI-compatible screen formatting sequences may be used. 'softcopy(2)' specifies that VT-100 screen formatting sequences may be used. 'hardcopy(3)' indicates that no screen-formatting sequences may be used. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ansi(1), softcopy(2), hardcopy(3)  

vPortFlowType 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.42
The port's type of flow control. 'none(1)' indicates that no flow control is in effect. 'xonXoff(2)' indicates software flow control by recognizing XON and XOFF characters. 'hardware(3)' indicates flow control delegated to the lower level, for example a parallel port. 'ctsRts(4)' and 'dsrDtr(5)' are specific to ports with vPortType = 'physicalRS-232(2) or 'physicalRS-423(3)'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), xonXoff(2), hardware(3), ctsRts(4), dsrDtr(5)  

vPortInFlowState 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.43
The current operational state of input flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicates flow not allowed. 'go' indicates flow allowed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), unknown(2), stop(3), go(4)  

vPortOutFlowState 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.44
The current operational state of output flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicates flow not allowed. 'go' indicates flow allowed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), unknown(2), stop(3), go(4)  

vPortCTSstate 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.45
The current state of the port's CLEAR-TO-SEND input. 'none(1)' indicates that the port has no CTS input. 'unknown(4)' indicates that the state of the input signal is unavailable to this software level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), on(2), off(3), unknown(4)  

vPortDSRstate 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.46
The current state of the port's DATA-SET-READY input. 'none(1)' indicates that the port has no DSR input. 'unknown(4)' indicates that the state of the input signal is unavailable to this software level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), on(2), off(3), unknown(4)  

vPortDCDstate 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.47
The current state of the port's DATA-CARRIER-DETECT input. 'none(1)' indicates that the port has no DCD input. 'unknown(4)' indicates that the state of the input signal is unavailable to this software level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), on(2), off(3), unknown(4)  

vPortDTRstate 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.48
The current state of the port's DATA-TERMINAL-READY output. 'none(1)' indicates that the port has no DTR output. 'unknown(4)' indicates that the state of the output signal is unavailable to this software level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), on(2), off(3), unknown(4)  

vPortRIstate 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.49
The current state of the port's RING-INDICATOR input. 'none(1)' indicates that the port has no RI input. 'unknown(4)' indicates that the state of the input signal is unavailable to this software level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), on(2), off(3), unknown(4)  

vPortRTSstate 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.50
The current state of the port's REQUEST-TO-SEND output. 'none(1)' indicates that the port has no RTS output. 'unknown(4)' indicates that the state of the output signal is unavailable to this software level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), on(2), off(3), unknown(4)  

vPortSpeed 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.51
The serial baud rate of the port. 'none(1)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), baud110(2), baud300(3), baud600(4), baud1200(5), baud2400(6), baud4800(7), baud9600(8), baud14400(9), baud19200(10), baud28800(11), baud38400(12), baud57600(13)  

vPortCharSize 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.52
The size of serial characters transmitted/received at the port, excluding parity and stop bits. 'none(1)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), seven-bits(2), eight-bits(3)  

vPortParityType 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.53
The type of parity used for serial transmission and reception of characters at the port. 'not-applicable(1)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-applicable(1), none(2), even(3), odd(4), mark(5), space(6)  

vPortAutobaud 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.54
Indicates whether the port will automatically attempt to autobaud to an external serial device after being logged out. 'not-applicable(3)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), not-applicable(3)  

vPortModemControl 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.55
Indicates whether the port modem control characteristic is enabled. When enabled, a physical serial port will not function unless modem signals are asserted, and the port's DTR output is dropped for 5 seconds each time the port gets logged out. 'not-applicable(3)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), not-applicable(3)  

vPortDSRlogout 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.56
Indicates whether the port DSRlogout characteristic is enabled. When enabled, a physical serial port will automatically be logged out when the DSR input is dropped. 'not-applicable(3)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), not-applicable(3)  

vPortRing 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.57
Indicates whether the port ring characteristic is enabled. When enabled, a physical serial port will raise and lower its RTS output and wait for the DSR input to be raised before accepting a remote connection request. 'not-applicable(3)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), not-applicable(3)  

vPortDTRwait 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.58
Indicates whether the port DTRwait characteristic is enabled. When enabled, a physical serial port will delay asserting its DTR and RTS outputs until the RI input signal is asserted. 'not-applicable(3)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), not-applicable(3)  

vPortSignalCheckEnable 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.59
Indicates whether the port signal check characteristic is enabled. When enabled, a physical serial port will check for the assertion of the DSR input signal before accepting a remote connection request. 'not-applicable(3)' indicates that the port is not a physical serial port. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), not-applicable(3)  

vPortHandshake 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.60
On some server units the physical serial ports have connectors which do not allow both the CTS and RI input signals. This object indicates how the input signal is to be interpreted. 'not-applicable(3)' indicates that the port is not a physical serial port, or that the serial port can accept both the CTS and RI input signals. The agent will accept any valid value on a set-request for such ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER signalCTS(1), signalRI(2), not-applicable(3)  

vPortRcvChars 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.61
Total number of characters detected as input from the port since system re-initialization, including locally-processed input, and input sent to all sessions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vPortTrnChars 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.62
Total number of characters detected as output from the port since system re-initialization, including locally-creating output, and output received from all sessions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vPortFrameErrs 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.63
Total number of received characters which were rejected because a framing error was detected. This counter only applies to physical serial ports. The value 0 will be returned for all other ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vPortOverrunErrs 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.64
Total number of received characters which were rejected for lack of character FIFO space on the serial communication controller. This counter only applies to physical serial ports. The value 0 will be returned for all other ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vPortParityErrs 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.65
Total number of received characters which were rejected because a parity error was detected. This counter only applies to physical serial ports. The value 0 will be returned for all other ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vPortCharsDropped 1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.66
Total number of received characters which were rejected for any reason not covered in other objects, for example lack of input buffer space. This counter only applies to physical serial ports. The value 0 will be returned for all other ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

vSvcRatingMode 1.3.6.1.4.1.170.1.1.2.6.1.3.1
Determines the method of computation for the rating of local services. 'scaled(2)' indicates that an algorithm is used where the rating is scaled to be between 0 and 255. 'unScaled(1)' indicates that the service rating is equal to the number of available service ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER scaled(1), unScaled(2)  

vSvcCurrNumber 1.3.6.1.4.1.170.1.1.2.6.1.3.2
An integer indicating the current number of entries in vSvcTable. This object is not constant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vSvcTable 1.3.6.1.4.1.170.1.1.2.6.1.3.3
A list of service entries. The number of entries is given by the value of vSvcCurrNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VSvcEntry

vSvcEntry 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1
Status and parameter values for a service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VSvcEntry  

vSvcName 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.1
A string which identifies the service uniquely among all other local services configured in the unit. This name is transmitted as part of the unit's LAT-compatible multicast messages. On a set-request the string is automatically converted to upper-case, as lower-case service names are not allowed on the server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..16)  

vSvcPorts 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.2
A 32-byte string which represents a bit map of which server ports are enabled for the service. Each server port is represented by one bit in the 32 bytes. If the bit is turned on, the corresponding server port is enabled for the service. The least significant bit of each byte represents the lowest of the ports for that byte. For example, port 1 (port with vPortIndex = 1) is represented by the least significant bit of the first byte, and port 16 (port with vPortIndex = 16) is represented by the most significant bit of the second byte, etc. Note that 32 bytes allows for up to 256 ports. For servers configured with less than 256 ports, all bits above the highest port number must always be zero. Note also that ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' cannot be enabled on a service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(32)  

vSvcIdent 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.3
A locally-administered identification string which is associated with the service and is transmitted as part of the unit's LAT-compatible multicast messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

vSvcRating 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.4
An integer indicating the ability for connections to this service to be accepted by the server. The higher the value, the more able the server is to accept connections to this service. A very low value indicates that the resources for this service are close to exhausted. The most dominant factor for determining the service rating is the number of idle ports which are enabled for the service. If a service has no idle ports enabled, its rating is zero. This number is transmitted as part of the unit's LAT-compatible multicast messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

vSvcLtEnable 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.5
Indicates whether the server will accept connections to this service over the LAT-compatible protocol. 'disabled(2)' indicates that LAT-compatible connections will not be accepted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vSvcTelEnable 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.6
Indicates whether the server will accept connections to this service over the Telnet protocol. 'disabled(2)' indicates that Telnet connections will not be accepted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vSvcLprEnable 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.7
Indicates whether the server will accept connections to this service over the LPR line printer protocol. 'disabled(2)' indicates that LPR connections will not be accepted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vSvcRawEnable 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.8
If enabled(1), indicates that the server will not interpret Telnet interesting characters when a Telnet connection is established to the service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vSvcVirtualEnable 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.9
Indicates whether the virtual characteristic is enabled or not on this service. Refer to the user manual for more information on the service virtual characteristic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vSvcVirtualText 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.10
Defines the virtual text string for this service. Refer to the user manual for more information on the function of the service virtual text string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..112)  

vSvcConnectEnable 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.11
Indicates whether connections are presently being accepted for this service or not. It is a way of temporarily turning off the service without deleting it from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vSvcPassword 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.12
Defines the password that must be correctly supplied before a session to this service can be established. a zero-length value indicates that no password must be supplied. Note that on a set-request, the new value is automatically converted to upper-case, as is the user password input.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..6)  

vSvcQueueEnable 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.13
Indicates whether or not the server will queue connection requests to the service if it is unavailable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vSvcIpAddr 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.14
Indicates the only IP address upon which the service will carry TCP sessions. This is used when the server has multiple IP addresses and it is desired that the service only respond to connection requests on one of those addresses. A value of 0.0.0.0 indicates that any of the server's IP addresses can be used to connect to this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vSvcTcpPort 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.15
Indicates the TCP port on which this service accepts TCP connections. A value of zero normally means that no TCP port has been assigned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

vSvcProfile 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.16
Indicates the profile entry in the vProfTable which is used to determine Telnet parameters when a Telnet connection is accepted to the service. A zero-length value indicates that only default profile parameter values will be used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

vSvcStatus 1.3.6.1.4.1.170.1.1.2.6.1.3.3.1.17
The current status of this service entry. Setting this object to the value invalid(2) has the effect of deleting the entry from the service table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

vProfCurrNumber 1.3.6.1.4.1.170.1.1.2.6.1.4.1
An integer indicating the current number of entries in vProfTable. This object is not constant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vProfTable 1.3.6.1.4.1.170.1.1.2.6.1.4.2
A list of profile entries. The number of entries is given by the value of vProfCurrNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VProfEntry

vProfEntry 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1
Parameter values for a profile entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VProfEntry  

vProfName 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.1
A unique string value for each profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..16)  

vProfDomain 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.2
A domain name extension that may be appended to a user-specified hostname with which the user wishes to start a session. For example, if the user's port profile has a vProfDomain of 'dss.com', and the user attempts to start a session to the specified host 'pluto,' the server will first attempt to resolve the hostname 'pluto,' and if this is unsuccessful it will then attempt to resolve the hostname 'pluto.dss.com.' This automatic appending of domain extension is only attempted if the value of vProfConcatenate is 'enabled(1).' A zero-length value indicates that no extension is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..63)  

vProfConcatenate 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.3
An indication of whether the server will append the value of vProfDomain to a user-specified hostname when the user wishes to start a session to the host (see vProfDomain). 'enabled(1)' indicates that the server will attempt to resolve the concatenated hostname if the unconcatenated hostname cannot be resolved to an IP address. 'disabled(2)' indicates that the server will not attempt the hostname concatenization.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vProfPermHostOnly 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.4
An indication of whether the server will attempt to resolve a user-specified hostname through the network nameserver protocol for ports with this profile. 'disabled(1)' indicates that the server will automatically attempt to resolve an unknown user-specified hostname. 'enabled(2)' indicates that if the user-specified hostname is not already in the hostname table, the server will not attempt to resolve it through the nameserver protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vProfTcpPort 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.5
The default remote TCP port to which the server will attempt to connect when a user starts a Telnet/Rlogin session on a port with this profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

vProfTcpTimeout 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.6
The maximum number of seconds TCP will wait for an acknowledgement before terminating the session.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

vProfTcpKeepalive 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.7
The number of seconds that the sessions intiated with this profile may remain idle (no characters transmitted or recieved) before a TCP keepalive message is generated. A value of 0 indicates that keepalive messages are never generated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

vProfIpTTL 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.8
The value of the IP time to live on packets transmitted for sessions initiated with this profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

vProfIpPrecedence 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.9
The value of the IP precedence on packets transmitted for sessions initiated with this profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

vProfTermType 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.10
The terminal type that Telnet/Rlogin will attempt to negotiate with the remote node for sessions initiated with this profile. A zero-length value indicates that no terminal type is negotiated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

vProfCrToNet 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.11
The character sequence which is sent by Telnet to the remote node to indicate a carriage return in the data stream for sessions initiated with this profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..2)  

vProfCrFromTerm 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.12
The local character sequence which, when delivered to Telnet for transmission, is interpreted as a carriage return and translated to the sequence indicated by vProfCrToNet for sessions initiated with this profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..2)  

vProfPadChar 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.13
The character used by the local Telnet implementation to pad transmitted data immediately following a carriage return for sessions initiated with this profile. A value of 0 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vProfPadLength 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.14
The number of pad characters inserted into the data stream by the local Telnet implementation immediately following a carriage return for sessions initiated with this profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

vProfEndRecord 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.15
The local character which, when delivered to Telnet for transmission, is interpreted as an end-of-record character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vProfNop 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.16
The local character which, when delivered to Telnet for transmission, is interpreted as a no-op character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vProfDataMark 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.17
The local character which, when delivered to Telnet for transmission, is interpreted as a data mark character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vProfBreak 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.18
The local character which, when delivered to Telnet for transmission, is interpreted as a break character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vProfIntProcess 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.19
The local character which, when delivered to Telnet for transmission, is interpreted as the interrupt process character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vProfAbortOutput 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.20
The local character which, when delivered to Telnet for transmission, is interpreted as the abort output character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vProfAttention 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.21
The local character which, when delivered to Telnet for transmission, is interpreted as the attention character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vProfEraseChar 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.22
The local character which, when delivered to Telnet for transmission, is interpreted as the backspace character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vProfEraseLine 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.23
The local character which, when delivered to Telnet for transmission, is interpreted as the erase line character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vProfGoAhead 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.24
The local character which, when delivered to Telnet for transmission, is interpreted as the go ahead character and translated to the appropriate Telnet control function for sessions initiated with this profile. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vProfNullPass 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.25
When enabled, null characters received by Telnet immediately following carriage return characters are passed through the data stream untouched. When disabled, these padding null characters are removed from the received data stream. This applies to sessions initiated with this profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vProfLocalEcho 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.26
Determines how the local Telnet entity negotiates the local echo option with the remote Telnet entity for sessions initiated with this profile. 'attempt(1)' indicates the the local Telnet entity actively attempts to enable the option. 'refuse(2)' indicates that the local Telnet entity will refuse to enable the option even when requested by the remote entity. 'allow(3) indicates that the local Telnet entity will not actively attempt to enable the option, but will enable the option when requested by the remote entity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER attempt(1), refuse(2), allow(3)  

vProfRemoteEcho 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.27
Determines how the local Telnet entity negotiates the remote echo option with the remote Telnet entity for sessions initiated with this profile. 'attempt(1)' indicates the the local Telnet entity actively attempts to enable the option. 'refuse(2)' indicates that the local Telnet entity will refuse to enable the option even when requested by the remote entity. 'allow(3) indicates that the local Telnet entity will not actively attempt to enable the option, but will enable the option when requested by the remote entity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER attempt(1), refuse(2), allow(3)  

vProfLocalBinary 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.28
Determines how the local Telnet entity negotiates the local binary option with the remote Telnet entity for sessions initiated with this profile. 'attempt(1)' indicates the the local Telnet entity actively attempts to enable the option. 'refuse(2)' indicates that the local Telnet entity will refuse to enable the option even when requested by the remote entity. 'allow(3) indicates that the local Telnet entity will not actively attempt to enable the option, but will enable the option when requested by the remote entity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER attempt(1), refuse(2), allow(3)  

vProfRemoteBinary 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.29
Determines how the local Telnet entity negotiates the remote binary option with the remote Telnet entity for sessions initiated with this profile. 'attempt(1)' indicates the the local Telnet entity actively attempts to enable the option. 'refuse(2)' indicates that the local Telnet entity will refuse to enable the option even when requested by the remote entity. 'allow(3) indicates that the local Telnet entity will not actively attempt to enable the option, but will enable the option when requested by the remote entity.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER attempt(1), refuse(2), allow(3)  

vProfStatus 1.3.6.1.4.1.170.1.1.2.6.1.4.2.1.30
The current status of this profile entry. Setting this object to the value invalid(2) has the effect of deleting the entry from the profile table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

vSecEnable 1.3.6.1.4.1.170.1.1.2.6.1.5.1
Determines whether or not the server's IP security feature is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vSecCurrNumber 1.3.6.1.4.1.170.1.1.2.6.1.5.2
An integer indicating the current number of entries in vSecTable. This object is not constant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vSecTable 1.3.6.1.4.1.170.1.1.2.6.1.5.3
A list of security entries. The number of entries is given by the value of vSecCurrNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VSecEntry

vSecEntry 1.3.6.1.4.1.170.1.1.2.6.1.5.3.1
Parameter values for a security entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VSecEntry  

vSecIndex 1.3.6.1.4.1.170.1.1.2.6.1.5.3.1.1
A unique value for each security entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

vSecAddress 1.3.6.1.4.1.170.1.1.2.6.1.5.3.1.2
The target address of the IP security entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vSecMask 1.3.6.1.4.1.170.1.1.2.6.1.5.3.1.3
A mask which is applied to vSecAddress to determine its significant bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vSecGroups 1.3.6.1.4.1.170.1.1.2.6.1.5.3.1.4
A set of group numbers which determines which security entries are in use on which ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  LtGroupList  

vSecStatus 1.3.6.1.4.1.170.1.1.2.6.1.5.3.1.5
The current status of this security entry. Setting this object to the value invalid(2) has the effect of deleting the entry from the security table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

vHostCurrNumber 1.3.6.1.4.1.170.1.1.2.6.1.6.1
An integer indicating the current number of entries in vHostTable. This object is not constant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vHostTable 1.3.6.1.4.1.170.1.1.2.6.1.6.2
A list of hostname entries. The number of entries is given by the value of vHostCurrNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VHostEntry

vHostEntry 1.3.6.1.4.1.170.1.1.2.6.1.6.2.1
Parameter and status values for a hostname entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VHostEntry  

vHostHostname 1.3.6.1.4.1.170.1.1.2.6.1.6.2.1.1
The hostname of the host. Note that if the value of vNsAllowLowerCase is 'disabled(2)', then on a set-request the specified hostname is automatically converted to upper case.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

vHostAddress 1.3.6.1.4.1.170.1.1.2.6.1.6.2.1.2
The IP address of the host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vHostTTL 1.3.6.1.4.1.170.1.1.2.6.1.6.2.1.3
The time to live (in seconds) of this entry in the host table. If the entry has been dynamically created by the nameserver protocol, the TTL will be a non-zero value indicating its remaining lifetime. Upon expiration of the TTL the entry is automatically deleted from the table. If the entry was created by a network administrator, the entry is considered 'permanent' and the value of its vHostTTL will be 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vHostStatus 1.3.6.1.4.1.170.1.1.2.6.1.6.2.1.4
The desired status of this host entry. Setting this object to the value 'invalid(2)' indicates that the entry is desired to be deleted from the host table. Only permanent entries will be deleted (entries for which the value of vHostTTL is 0). Dynamic entries are only deleted upon expiration of their vHostTTL or upon system re-initialization.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

vNsRequestMode 1.3.6.1.4.1.170.1.1.2.6.1.7.1
The current mode of network hostname resolution. 'recursive(1)' indicates that the server sends recursive-type requests to network nameservers. 'nonRecursive(2)' indicates that the server does not send recursive-type nameserver requests.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER recursive(1), nonRecursive(2)  

vNsAllowLowerCase 1.3.6.1.4.1.170.1.1.2.6.1.7.2
Determines whether the nameserver resolver will automatically convert user-specified hostnames to upper case before attempting to resolve them. 'disabled(2)' indicates that automatic conversion to upper case will take place.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vNsCurrNumber 1.3.6.1.4.1.170.1.1.2.6.1.7.3
An integer indicating the current number of entries in vNsTable. This object is not constant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vNsTable 1.3.6.1.4.1.170.1.1.2.6.1.7.4
A list of nameserver entries. The number of entries is given by the value of vNsCurrNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VNsEntry

vNsEntry 1.3.6.1.4.1.170.1.1.2.6.1.7.4.1
Parameter values for a nameserver entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VNsEntry  

vNsAddress 1.3.6.1.4.1.170.1.1.2.6.1.7.4.1.1
The IP address of the nameserver host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vNsHostname 1.3.6.1.4.1.170.1.1.2.6.1.7.4.1.2
The resolved hostname of the nameserver host A zero- length value indicates that the hostname is unknown at the present time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

vNsTTL 1.3.6.1.4.1.170.1.1.2.6.1.7.4.1.3
The time to live (in seconds) of this entry in the nameserver table. If the entry has been dynamically created by the nameserver protocol, the TTL will be a non-zero value indicating its remaining lifetime. Upon expiration of the TTL the entry is automatically deleted from the table. If the entry was created by a network administrator, the entry is considered 'permanent' and the value of its vNsTTL will be 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vNsStatus 1.3.6.1.4.1.170.1.1.2.6.1.7.4.1.4
The status of this nameserver entry. Setting this object to the value 'invalid(2)' has the effect of deleting the entry from the nameserver table. Dynamic entries are also automatically deleted upon expiration of their vNsTTL or upon system re-initialization.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

vTacServerCurrNumber 1.3.6.1.4.1.170.1.1.2.6.1.8.1
An integer indicating the current number of entries in vTacTable. This object is not constant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vTacTable 1.3.6.1.4.1.170.1.1.2.6.1.8.2
A list of Tacacs server entries. The number of entries is given by the value of vTacServerCurrNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VTacEntry

vTacEntry 1.3.6.1.4.1.170.1.1.2.6.1.8.2.1
Parameter values for a Tacacs server entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VTacEntry  

vTacAddress 1.3.6.1.4.1.170.1.1.2.6.1.8.2.1.1
The IP address of the Tacacs server host.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vTacHostname 1.3.6.1.4.1.170.1.1.2.6.1.8.2.1.2
The resolved hostname of the Tacacs server host. If the hostname is currently unknown, a zero-length value is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

vTacStatus 1.3.6.1.4.1.170.1.1.2.6.1.8.2.1.3
The current status of this Tacacs server entry. Setting this object to the value invalid(2) has the effect of deleting the entry from the Tacacs server table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

vIpBcastAddr 1.3.6.1.4.1.170.1.1.2.6.1.9.1
The IP address to be used for IP limited broadcasts originating from this unit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vIpMaxAddr 1.3.6.1.4.1.170.1.1.2.6.1.9.2
An integer indicating the maximum number of IP addresses that can be simultaneously assigned to this unit, totaling over all interfaces. Note that the server must be rebooted before a change in the value of this variable actually takes effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 8..64  

vIpMaxHostHashEntries 1.3.6.1.4.1.170.1.1.2.6.1.9.3
An integer indicating the number of buckets in the host route hash table. Note that the server must be rebooted before a change in the value of this variable actually takes effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER size-11(1), size-13(2), size-17(3), size-19(4), size-23(5), size-29(6), size-31(7), size-37(8), size-41(9), size-43(10), size-47(11), size-49(12), size-53(13), size-59(14), size-61(15), size-67(16)  

vIpMaxNetHashEntries 1.3.6.1.4.1.170.1.1.2.6.1.9.4
An integer indicating the number of buckets in the network route hash table. Note that the server must be rebooted before a change in the value of this variable actually takes effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER size-11(1), size-13(2), size-17(3), size-19(4), size-23(5), size-29(6), size-31(7), size-37(8), size-41(9), size-43(10), size-47(11), size-49(12), size-53(13), size-59(14), size-61(15), size-67(16)  

vIpMaxInterfaces 1.3.6.1.4.1.170.1.1.2.6.1.9.5
An integer indicating the maximum number of IP interfaces of all types that can be configured on the unit. Note that the server must be rebooted before a change in the value of this variable actually takes effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..128  

vIpMaxRoutes 1.3.6.1.4.1.170.1.1.2.6.1.9.6
An integer indicating the maximum number of entries in the unit's route table. Note that the server must be rebooted before a change in the value of this variable actually takes effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..128  

vArpMaxEntries 1.3.6.1.4.1.170.1.1.2.6.1.10.1
An integer indicating the maximum number of entries in the unit's ARP table. Note that the server must be rebooted before a change in the value of this variable actually takes effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..128  

vArpRetryTimeout 1.3.6.1.4.1.170.1.1.2.6.1.10.2
An integer indicating the number of seconds between ARP retransmit attempts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..30  

vArpRetryMax 1.3.6.1.4.1.170.1.1.2.6.1.10.3
An integer indicating the maximum number of ARP retransmit attempts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..10  

vArpConfirmTimer 1.3.6.1.4.1.170.1.1.2.6.1.10.4
An integer indicating the number of seconds between confirmations of an ARP entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..300  

vArpIdleTimeout 1.3.6.1.4.1.170.1.1.2.6.1.10.5
An integer indicating the number of seconds that a non-permanent ARP entry can go unused before it is deleted from the table. A non-permanent entry is one which was entered into the table by the ARP protocol rather than manually entered by a network administrator.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 60..1800  

vTcpIpPrecedence 1.3.6.1.4.1.170.1.1.2.6.1.11.1
An integer indicating the value of the IP precedence that the TCP layer will request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

vTcpSendQSize 1.3.6.1.4.1.170.1.1.2.6.1.11.2
An integer indicating the maximum number of data bytes that will be queued for transmission by the TCP protocol layer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..8192  

vTcpRcvWinSize 1.3.6.1.4.1.170.1.1.2.6.1.11.3
An integer indicating the TCP receive window size in bytes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 128..8192  

vTcpSegSize 1.3.6.1.4.1.170.1.1.2.6.1.11.4
An integer indicating the TCP segment size in bytes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 64..511  

vTcpTimerInterval 1.3.6.1.4.1.170.1.1.2.6.1.11.5
An integer indicating the resolution (in 1/100 s) of all timer values used by TCP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..200  

vTcpChecksumEnable 1.3.6.1.4.1.170.1.1.2.6.1.11.6
An integer indicating whether TCP checksums are enabled for all TCP connections.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vTelCourierEnable 1.3.6.1.4.1.170.1.1.2.6.1.12.1
Determines whether or not the Telnet courier feature is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vTelCourierText 1.3.6.1.4.1.170.1.1.2.6.1.12.2
Defines the text which is tranmsitted for the Telnet courier feature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

vTelSessCurrNumber 1.3.6.1.4.1.170.1.1.2.6.1.12.3
An integer indicating the current number of entries in vTelSessTable. This object is not constant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vTelSessTable 1.3.6.1.4.1.170.1.1.2.6.1.12.4
A list of Telnet session entries. The number of entries is given by the value of vTelSessCurrNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VTelSessEntry

vTelSessEntry 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1
Parameter and status values for a Telnet session entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VTelSessEntry  

vTelSessPortIndex 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.1
The value of vPortIndex for the port to which this session belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vTelSessIndex 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.2
The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential. Session indexes may be reused for different ports. For example, port 1 and port 3 may both have a session 2 at the same time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vTelSessOrigin 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.3
The session's source of establishment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), network(2), local(3)  

vTelSessState 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.4
The current state of the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER starting(1), running(2), stopping(3)  

vTelSessDisconnect 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.5
A control to terminate the session. In response to a get-request or get-next-request, the agent always returns 'ready(1)' as the value. Setting the value to 'execute(2)' causes termination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

vTelSessLocalAddr 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.6
The local IP address for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vTelSessLocalTcpPort 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.7
The local TCP port number for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

vTelSessRemAddr 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.8
The remote IP address for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vTelSessRemTcpPort 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.9
The remote TCP port number for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

vTelSessCrToNet 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.10
The character sequence which is sent to the remote node of the session to indicate a carriage return in the data stream.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..2)  

vTelSessCrFromTerm 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.11
The local character sequence which, when delivered to Telnet for transmission, is interpreted as a carriage return and translated to the sequence indicated by vTelSessCrToNet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..2)  

vTelSessPadChar 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.12
The character used by the local Telnet implementation to pad transmitted data immediately following a carriage return. A value of 0 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vTelSessPadLength 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.13
The number of pad characters inserted into the data stream by the local Telnet implementation immediately following a carriage return.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

vTelSessUserTimeout 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.14
The maximum number of seconds Telnet instructs TCP to wait for an acknowledgement before terminating the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

vTelSessKeepalive 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.15
The number of seconds that the session may remain idle (no characters transmitted or recieved) before a TCP keepalive message is generated. A value of 0 indicates that keepalive messages are never generated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

vTelSessIpTTL 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.16
The value of the IP time to live on packets transmitted for this session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

vTelSessIpPrecedence 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.17
The value of the IP precedence on packets transmitted for this session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

vTelSessEndRecord 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.18
The local character which, when delivered to Telnet for transmission, is interpreted as an end-of-record character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vTelSessNop 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.19
The local character which, when delivered to Telnet for transmission, is interpreted as a no-op character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vTelSessDataMark 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.20
The local character which, when delivered to Telnet for transmission, is interpreted as a data mark character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vTelSessBreak 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.21
The local character which, when delivered to Telnet for transmission, is interpreted as a break character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vTelSessIntProcess 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.22
The local character which, when delivered to Telnet for transmission, is interpreted as the interrupt process character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vTelSessAbortOutput 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.23
The local character which, when delivered to Telnet for transmission, is interpreted as the abort output character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vTelSessAttention 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.24
The local character which, when delivered to Telnet for transmission, is interpreted as the attention character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vTelSessEraseChar 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.25
The local character which, when delivered to Telnet for transmission, is interpreted as the backspace character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vTelSessEraseLine 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.26
The local character which, when delivered to Telnet for transmission, is interpreted as the erase line character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vTelSessGoAhead 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.27
The local character which, when delivered to Telnet for transmission, is interpreted as the go ahead character and translated to the appropriate Telnet control function. A value of 255 indicates that the character is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Character  

vTelSessNullPass 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.28
When enabled, null characters received by Telnet immediately following carriage return characters are passed through the data stream untouched. When disabled, these padding null characters are removed from the received data stream.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vTelSessTermType 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.29
A text string indicating the currently negotiated terminal type for the session. A zero-length value indicates no terminal type has been negotiated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

vTelSessLocalEcho 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.30
When enabled, the local Telnet will perform local echoing of all data delivered to it for transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vTelSessRemoteEcho 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.31
When enabled, the remote Telnet will perform echoing of all received network data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vTelSessLocalBinary 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.32
When enabled, the local Telnet will transmit data in binary mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vTelSessRemoteBinary 1.3.6.1.4.1.170.1.1.2.6.1.12.4.1.33
When enabled, the remote Telnet will transmit data in binary mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vRlogSessCurrNumber 1.3.6.1.4.1.170.1.1.2.6.1.13.1
An integer indicating the current number of entries in vRlogSessTable. This object is not constant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vRlogSessTable 1.3.6.1.4.1.170.1.1.2.6.1.13.2
A list of Rlogin session entries. The number of entries is given by the value of vRlogSessCurrNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VRlogSessEntry

vRlogSessEntry 1.3.6.1.4.1.170.1.1.2.6.1.13.2.1
Parameter and status values for a Rlogin session entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VRlogSessEntry  

vRlogSessPortIndex 1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.1
The value of vPortIndex for the port to which this session belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vRlogSessIndex 1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.2
The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential. Session indexes may be reused for different ports. For example, port 1 and port 3 may both have a session 2 at the same time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vRlogSessOrigin 1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.3
The session's source of establishment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), network(2), local(3)  

vRlogSessState 1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.4
The current state of the session.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER starting(1), running(2), stopping(3)  

vRlogSessDisconnect 1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.5
A control to terminate the session. In response to a get-request or get-next-request, the agent always returns 'ready(1)' as the value. Setting the value to 'execute(2)' causes termination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

vRlogSessLocalAddr 1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.6
The local IP address for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vRlogSessLocalTcpPort 1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.7
The local TCP port number for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

vRlogSessRemAddr 1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.8
The remote IP address for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vRlogSessRemTcpPort 1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.9
The remote TCP port number for this session. This object supplies part of the necessary index information to locate the corresponding session in the MIB II TcpConnTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

vRlogSessTermType 1.3.6.1.4.1.170.1.1.2.6.1.13.2.1.10
A text string indicating the currently negotiated terminal type for the session. A zero-length value indicates no terminal type has been negotiated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

vLtNodeName 1.3.6.1.4.1.170.1.1.2.6.1.14.1
The LAT-compatible node name for this unit. This name is transmitted as part of the node's LAT-compatible multicast messages.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..16)  

vLtNodeID 1.3.6.1.4.1.170.1.1.2.6.1.14.2
The LAT-compatible identification string for this server. This string is transmitted as part of the agent's LAT-compatible multicast messages.
Status: optional Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..40)  

vLtNodeGroups 1.3.6.1.4.1.170.1.1.2.6.1.14.3
A bit string indicating the LAT-compatible groups which are transmitted as part of the node's LAT-compatible multicast messages.
Status: optional Access: read-write
OBJECT-TYPE    
  LtGroupList  

vLtNumber 1.3.6.1.4.1.170.1.1.2.6.1.14.4
An integer indicating the LAT-compatible number that is tranmsitted as part of the node's LAT-compatible multicast messages.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

vLtMcastEnable 1.3.6.1.4.1.170.1.1.2.6.1.14.5
An integer indicating whether the unit's LAT-compatible periodic multicast is enabled or not. If enabled, the unit will transmit one LAT-compatible multicast message every vLtMcastTimer seconds if it has any local services to announce.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vLtMcastTimer 1.3.6.1.4.1.170.1.1.2.6.1.14.6
An integer indicating the unit's multicast timer value in seconds. If multicasts are enabled, the unit will transmit one LAT-compatible multicast message every vLtMcastTimer seconds if it has any local services to announce.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER 10..180  

vLtCktTimer 1.3.6.1.4.1.170.1.1.2.6.1.14.7
An integer indicating the unit's circuit timer value in milliseconds. For circuits on which the unit is the master, circuit data is collected for transmission once every circuit timer interval.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER 1..200  

vLtKeepaliveTimer 1.3.6.1.4.1.170.1.1.2.6.1.14.8
An integer indicating the unit's keepalive timer value in seconds. For circuits on which the unit is the master, a keepalive message is transmitted once every keepalive timer interval if the circuit is otherwise idle.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER 10..180  

vLtMaxRetran 1.3.6.1.4.1.170.1.1.2.6.1.14.9
An integer indicating the maximum number of times the unit will attempt to retransmit LAT-compatible messages.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER 4..120  

vLtSlotPerCkt 1.3.6.1.4.1.170.1.1.2.6.1.14.10
An integer indicating the maximum number of slots per circuit that the unit can support. This effectively limits the number of sessions the unit can maintain with any other node on a single circuit.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

vLtMaxNodes 1.3.6.1.4.1.170.1.1.2.6.1.14.11
An integer indicating the maximum number of LAT-compatible nodes about which the unit will maintain information necessary for session establishment. When the unit receives LAT-compatible multicasts, it enters the pertinent information into its internal node table. This object indicates the maximum number of entries in the node table.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER 16..1024  

vLtMaxSvcs 1.3.6.1.4.1.170.1.1.2.6.1.14.12
An integer indicating the maximum number of LAT-compatible services about which the unit will maintain information necessary for session establishment. When the unit receives LAT-compatible multicasts, it enters the pertinent information into its internal service table. This object indicates the size of the service table.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER 16..2048  

vLtMaxCkts 1.3.6.1.4.1.170.1.1.2.6.1.14.13
An integer indicating the maximum number of simultaneous active LAT-compatible circuits. In effect this object governs the maximum number of LAT-compatible nodes with which the unit can maintain simultaneous connections.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER 4..128  

vLtSessCurrNumber 1.3.6.1.4.1.170.1.1.2.6.1.14.14
An integer indicating the current number of entries in vLtSessTable. This object is not constant.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

vLtSessTable 1.3.6.1.4.1.170.1.1.2.6.1.14.15
A list of LAT-compatible session entries. The number of entries is given by the value of vLtSessCurrNumber.
Status: optional Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VLtSessEntry

vLtSessEntry 1.3.6.1.4.1.170.1.1.2.6.1.14.15.1
Parameter and status values for a LAT-compatible session entry.
Status: optional Access: not-accessible
OBJECT-TYPE    
  VLtSessEntry  

vLtSessPortIndex 1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.1
The value of vPortIndex for the port to which this session belongs.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

vLtSessIndex 1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.2
The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential. Session indexes may be reused for different ports. For example, port 1 and port 3 may both have a session 2 at the same time.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER  

vLtSessOrigin 1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.3
The session's source of establishment. 'network(2)' indicates that a remote node has started this session. 'local(3)' indicates that the session was started by the agent port given by vLtSessPortIndex. 'remote-port(4)' indicates that the session is local between two server ports, and the port given by vLtSessPortIndex was not the initiator of the session.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), network(2), local(3), remote-port(4)  

vLtSessState 1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.4
The current state of the session.
Status: optional Access: read-only
OBJECT-TYPE    
  INTEGER starting(1), running(2), stopping(3)  

vLtSessDisconnect 1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.5
A control to terminate the session. In response to a get-request or get-next-request, the agent always returns 'ready(1)' as the value. Setting the value to 'execute(2)' causes termination.
Status: optional Access: read-write
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

vLtSessSvcName 1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.6
A (readable) text string indicating the name of the LAT-compatible remote service. A zero-length value indicates that the remote service for this session is unknown.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

vLtSessNodeName 1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.7
A (readable) text string indicating the name of the LAT-compatible remote node. A zero-length value indicates that the remote node for this session is unknown.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

vLtSessDestName 1.3.6.1.4.1.170.1.1.2.6.1.14.15.1.8
A (readable) text string indicating the name of the LAT-compatible remote destination port. A zero-length value indicates that the remote port name for this session is unknown.
Status: optional Access: read-only
OBJECT-TYPE    
  DisplayString  

vLtTotalRcvPkts 1.3.6.1.4.1.170.1.1.2.6.1.14.16
A count of the total number of LAT-compatible messages received and processed by the unit.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

vLtTotalTrnPkts 1.3.6.1.4.1.170.1.1.2.6.1.14.17
A count of the total number of LAT-compatible messages transmitted by the unit.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

vLtTotalRetranPkts 1.3.6.1.4.1.170.1.1.2.6.1.14.18
A count of the total number of LAT-compatible messages retransmited.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

vLtRcvCorruptPkts 1.3.6.1.4.1.170.1.1.2.6.1.14.19
A count of the total number of LAT-compatible station packets recieved which were found to be invalid or corrupted.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

vLtRcvCorruptMcasts 1.3.6.1.4.1.170.1.1.2.6.1.14.20
A count of the total number of LAT-compatible multicast packets recieved which were found to be invalid or corrupted.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

vLtRcvDuplicatePkts 1.3.6.1.4.1.170.1.1.2.6.1.14.21
A count of the total number of LAT-compatible messages received which had already been acknowledged by the unit.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

vLtReqAccepted 1.3.6.1.4.1.170.1.1.2.6.1.14.22
A count of the total number of remote connection requests which were received and accepted by the unit.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

vLtReqRejected 1.3.6.1.4.1.170.1.1.2.6.1.14.23
A count of the total number of remote connection requests which were received and rejected by the unit.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

vLtTotalNodeDiscards 1.3.6.1.4.1.170.1.1.2.6.1.14.24
A count of the total number of LAT-compatible nodes that the unit has not been able to insert into its internal node table, due to resource failures.
Status: optional Access: read-only
OBJECT-TYPE    
  Counter  

vQueMaxEntries 1.3.6.1.4.1.170.1.1.2.6.1.15.1
An integer indicating the maximum number of queued connection requests. This governs the maximum value that vQueCurrNumber can take.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 4..128  

vQueCurrNumber 1.3.6.1.4.1.170.1.1.2.6.1.15.2
An integer indicating the current number of entries in vQueTable. This object is not constant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vQueTable 1.3.6.1.4.1.170.1.1.2.6.1.15.3
A list of queue entries. The number of entries is given by the value of vQueCurrNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VQueEntry

vQueEntry 1.3.6.1.4.1.170.1.1.2.6.1.15.3.1
Parameter and status values for a queue entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VQueEntry  

vQueEntryNumber 1.3.6.1.4.1.170.1.1.2.6.1.15.3.1.1
A unique identifier for the queue entry. Entry numbers may be re-used, but there will never be two simultaneous queue entries with the same value of vQueEntryNumber.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

vQueSvcName 1.3.6.1.4.1.170.1.1.2.6.1.15.3.1.2
The name of the service for which this queue entry is awating connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vQueNodeName 1.3.6.1.4.1.170.1.1.2.6.1.15.3.1.3
The name of the remote node with which the connection will take place.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vQuePortName 1.3.6.1.4.1.170.1.1.2.6.1.15.3.1.4
The name of the port with which the connection will take place.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vQueStatus 1.3.6.1.4.1.170.1.1.2.6.1.15.3.1.5
The current status of the queue entry. Setting the value of this object to 'invalid(2)' has the effect of deleting the queue entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

vSnmpReadCommunity 1.3.6.1.4.1.170.1.1.2.6.1.16.1
A current community name in use by the agent for which get-requests and getnext-requests are permitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..10)  

vSnmpWriteCommunity 1.3.6.1.4.1.170.1.1.2.6.1.16.2
A current community name in use by the agent for which the set-request is permitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..10)  

vSnmpReadWriteCommunity 1.3.6.1.4.1.170.1.1.2.6.1.16.3
A current community name in use by the agent for which set-requests, get-requests, and getnext-requests are permitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..10)  

vSnmpWriteEnable 1.3.6.1.4.1.170.1.1.2.6.1.16.4
An integer which indicates whether SET requests are permitted from any management station. This flag overrides use of the WRITE or READWRITE community names. Thus, if this object has the value disabled(2), no SET requests are permitted regardless of community name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vSnmpTrapDestCurrNumber 1.3.6.1.4.1.170.1.1.2.6.1.16.5
An integer indicating the current number of entries in vSnmpTrapDestTable. This object is not constant.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vSnmpTrapDestTable 1.3.6.1.4.1.170.1.1.2.6.1.16.6
A list of destination management stations to which this agent will address certain generated trap messages. The number of entries is given by the value of vSnmpTrapDestCurrNumber.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VSnmpTrapDestEntry

vSnmpTrapDestEntry 1.3.6.1.4.1.170.1.1.2.6.1.16.6.1
Parameter and status values for a SNMP trap destination entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VSnmpTrapDestEntry  

vSnmpTrapDestAddr 1.3.6.1.4.1.170.1.1.2.6.1.16.6.1.1
The IP address of this trap destination node.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

vSnmpTrapDestCommunity 1.3.6.1.4.1.170.1.1.2.6.1.16.6.1.2
Indication of which of the three locally maintained community names will be used in trap messages addressed to this trap destination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER read(1), write(2), readwrite(3)  

vSnmpTrapDestColdEnable 1.3.6.1.4.1.170.1.1.2.6.1.16.6.1.3
An indication of whether trap messages of the 'cold-start' type will be sent to this trap destination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vSnmpTrapDestAuthEnable 1.3.6.1.4.1.170.1.1.2.6.1.16.6.1.4
An indication of whether trap messages of the 'authentication-failure' type will be sent to this trap destination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vSnmpTrapDestStatus 1.3.6.1.4.1.170.1.1.2.6.1.16.6.1.5
The current status of the trap destination entry. Setting this object to the value 'invalid(2)' has the effect of deleting the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)