BLADETYPE2-NETWORK-MIB

File: BLADETYPE2-NETWORK-MIB.mib (295695 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC HP-SWITCH-PL-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter32 Gauge32 IpAddress
Unsigned32 DisplayString PhysAddress
hpSwitchBladeType2-Mgmt

Defined Types

IpCurCfgIntfEntry  
SEQUENCE    
  ipCurCfgIntfIndex Integer32
  ipCurCfgIntfAddr IpAddress
  ipCurCfgIntfMask IpAddress
  ipCurCfgIntfBroadcast IpAddress
  ipCurCfgIntfVlan INTEGER
  ipCurCfgIntfState INTEGER
  ipCurCfgIntfBootpRelay INTEGER

IpNewCfgIntfEntry  
SEQUENCE    
  ipNewCfgIntfIndex Integer32
  ipNewCfgIntfAddr IpAddress
  ipNewCfgIntfMask IpAddress
  ipNewCfgIntfBroadcast IpAddress
  ipNewCfgIntfVlan INTEGER
  ipNewCfgIntfState INTEGER
  ipNewCfgIntfDelete INTEGER
  ipNewCfgIntfBootpRelay INTEGER

IpCurCfgGwEntry  
SEQUENCE    
  ipCurCfgGwIndex Integer32
  ipCurCfgGwAddr IpAddress
  ipCurCfgGwInterval INTEGER
  ipCurCfgGwRetry INTEGER
  ipCurCfgGwArp INTEGER
  ipCurCfgGwState INTEGER

IpNewCfgGwEntry  
SEQUENCE    
  ipNewCfgGwIndex Integer32
  ipNewCfgGwAddr IpAddress
  ipNewCfgGwInterval INTEGER
  ipNewCfgGwRetry INTEGER
  ipNewCfgGwState INTEGER
  ipNewCfgGwArp INTEGER
  ipNewCfgGwDelete INTEGER

IpCurCfgStaticRouteEntry  
SEQUENCE    
  ipCurCfgStaticRouteIndx Integer32
  ipCurCfgStaticRouteDestIp IpAddress
  ipCurCfgStaticRouteMask IpAddress
  ipCurCfgStaticRouteGateway IpAddress
  ipCurCfgStaticRouteInterface Integer32

IpNewCfgStaticRouteEntry  
SEQUENCE    
  ipNewCfgStaticRouteIndx Integer32
  ipNewCfgStaticRouteDestIp IpAddress
  ipNewCfgStaticRouteMask IpAddress
  ipNewCfgStaticRouteGateway IpAddress
  ipNewCfgStaticRouteAction INTEGER
  ipNewCfgStaticRouteInterface Integer32

RipCurCfgIntfEntry  
SEQUENCE    
  ripCurCfgIntfIndex INTEGER
  ripCurCfgIntfVersion INTEGER
  ripCurCfgIntfSupply INTEGER
  ripCurCfgIntfListen INTEGER
  ripCurCfgIntfDefault INTEGER
  ripCurCfgIntfTrigUpdate INTEGER
  ripCurCfgIntfMcastUpdate INTEGER
  ripCurCfgIntfPoisonReverse INTEGER
  ripCurCfgIntfState INTEGER
  ripCurCfgIntfMetric INTEGER
  ripCurCfgIntfAuth INTEGER
  ripCurCfgIntfKey DisplayString
  ripCurCfgIntfSplitHorizon INTEGER

RipNewCfgIntfEntry  
SEQUENCE    
  ripNewCfgIntfIndex INTEGER
  ripNewCfgIntfVersion INTEGER
  ripNewCfgIntfSupply INTEGER
  ripNewCfgIntfListen INTEGER
  ripNewCfgIntfDefault INTEGER
  ripNewCfgIntfTrigUpdate INTEGER
  ripNewCfgIntfMcastUpdate INTEGER
  ripNewCfgIntfPoisonReverse INTEGER
  ripNewCfgIntfState INTEGER
  ripNewCfgIntfMetric INTEGER
  ripNewCfgIntfAuth INTEGER
  ripNewCfgIntfKey DisplayString
  ripNewCfgIntfSplitHorizon INTEGER

IpCurCfgStaticArpEntry  
SEQUENCE    
  ipCurCfgStaticArpIndx Integer32
  ipCurCfgStaticArpIp IpAddress
  ipCurCfgStaticArpMAC PhysAddress
  ipCurCfgStaticArpVlan INTEGER
  ipCurCfgStaticArpPort Integer32

IpNewCfgStaticArpEntry  
SEQUENCE    
  ipNewCfgStaticArpIndx Integer32
  ipNewCfgStaticArpIp IpAddress
  ipNewCfgStaticArpMAC PhysAddress
  ipNewCfgStaticArpVlan INTEGER
  ipNewCfgStaticArpPort Integer32
  ipNewCfgStaticArpAction INTEGER

VrrpCurCfgVirtRtrTableEntry  
SEQUENCE    
  vrrpCurCfgVirtRtrIndx Integer32
  vrrpCurCfgVirtRtrID INTEGER
  vrrpCurCfgVirtRtrAddr IpAddress
  vrrpCurCfgVirtRtrIfIndex Integer32
  vrrpCurCfgVirtRtrInterval INTEGER
  vrrpCurCfgVirtRtrPriority INTEGER
  vrrpCurCfgVirtRtrPreempt INTEGER
  vrrpCurCfgVirtRtrState INTEGER
  vrrpCurCfgVirtRtrSharing INTEGER
  vrrpCurCfgVirtRtrTckVirtRtr INTEGER
  vrrpCurCfgVirtRtrTckIpIntf INTEGER
  vrrpCurCfgVirtRtrTckVlanPort INTEGER
  vrrpCurCfgVirtRtrTckL4Port INTEGER
  vrrpCurCfgVirtRtrTckRServer INTEGER
  vrrpCurCfgVirtRtrTckHsrp INTEGER
  vrrpCurCfgVirtRtrTckHsrv INTEGER

VrrpNewCfgVirtRtrTableEntry  
SEQUENCE    
  vrrpNewCfgVirtRtrIndx Integer32
  vrrpNewCfgVirtRtrID INTEGER
  vrrpNewCfgVirtRtrAddr IpAddress
  vrrpNewCfgVirtRtrIfIndex Integer32
  vrrpNewCfgVirtRtrInterval INTEGER
  vrrpNewCfgVirtRtrPriority INTEGER
  vrrpNewCfgVirtRtrPreempt INTEGER
  vrrpNewCfgVirtRtrState INTEGER
  vrrpNewCfgVirtRtrDelete INTEGER
  vrrpNewCfgVirtRtrSharing INTEGER
  vrrpNewCfgVirtRtrTckVirtRtr INTEGER
  vrrpNewCfgVirtRtrTckIpIntf INTEGER
  vrrpNewCfgVirtRtrTckVlanPort INTEGER
  vrrpNewCfgVirtRtrTckL4Port INTEGER
  vrrpNewCfgVirtRtrTckRServer INTEGER
  vrrpNewCfgVirtRtrTckHsrp INTEGER
  vrrpNewCfgVirtRtrTckHsrv INTEGER

VrrpCurCfgIfTableEntry  
SEQUENCE    
  vrrpCurCfgIfIndx Integer32
  vrrpCurCfgIfAuthType INTEGER
  vrrpCurCfgIfPasswd DisplayString

VrrpNewCfgIfTableEntry  
SEQUENCE    
  vrrpNewCfgIfIndx Integer32
  vrrpNewCfgIfAuthType INTEGER
  vrrpNewCfgIfPasswd DisplayString
  vrrpNewCfgIfDelete INTEGER

VrrpCurCfgVirtRtrGrpTableEntry  
SEQUENCE    
  vrrpCurCfgVirtRtrGrpIndx Integer32
  vrrpCurCfgVirtRtrGrpID INTEGER
  vrrpCurCfgVirtRtrGrpIfIndex Integer32
  vrrpCurCfgVirtRtrGrpInterval INTEGER
  vrrpCurCfgVirtRtrGrpPriority INTEGER
  vrrpCurCfgVirtRtrGrpPreempt INTEGER
  vrrpCurCfgVirtRtrGrpState INTEGER
  vrrpCurCfgVirtRtrGrpSharing INTEGER
  vrrpCurCfgVirtRtrGrpTckVirtRtr INTEGER
  vrrpCurCfgVirtRtrGrpTckIpIntf INTEGER
  vrrpCurCfgVirtRtrGrpTckVlanPort INTEGER
  vrrpCurCfgVirtRtrGrpTckL4Port INTEGER
  vrrpCurCfgVirtRtrGrpTckRServer INTEGER
  vrrpCurCfgVirtRtrGrpTckHsrp INTEGER
  vrrpCurCfgVirtRtrGrpTckHsrv INTEGER

VrrpNewCfgVirtRtrGrpTableEntry  
SEQUENCE    
  vrrpNewCfgVirtRtrGrpIndx Integer32
  vrrpNewCfgVirtRtrGrpID INTEGER
  vrrpNewCfgVirtRtrGrpIfIndex Integer32
  vrrpNewCfgVirtRtrGrpInterval INTEGER
  vrrpNewCfgVirtRtrGrpPriority INTEGER
  vrrpNewCfgVirtRtrGrpPreempt INTEGER
  vrrpNewCfgVirtRtrGrpState INTEGER
  vrrpNewCfgVirtRtrGrpDelete INTEGER
  vrrpNewCfgVirtRtrGrpSharing INTEGER
  vrrpNewCfgVirtRtrGrpTckVirtRtr INTEGER
  vrrpNewCfgVirtRtrGrpTckIpIntf INTEGER
  vrrpNewCfgVirtRtrGrpTckVlanPort INTEGER
  vrrpNewCfgVirtRtrGrpTckL4Port INTEGER
  vrrpNewCfgVirtRtrGrpTckRServer INTEGER
  vrrpNewCfgVirtRtrGrpTckHsrp INTEGER
  vrrpNewCfgVirtRtrGrpTckHsrv INTEGER

IpCurCfgNwfEntry  
SEQUENCE    
  ipCurCfgNwfIndex Integer32
  ipCurCfgNwfAddr IpAddress
  ipCurCfgNwfMask IpAddress
  ipCurCfgNwfState INTEGER

IpNewCfgNwfEntry  
SEQUENCE    
  ipNewCfgNwfIndex Integer32
  ipNewCfgNwfAddr IpAddress
  ipNewCfgNwfMask IpAddress
  ipNewCfgNwfState INTEGER
  ipNewCfgNwfDelete INTEGER

IpCurCfgRmapEntry  
SEQUENCE    
  ipCurCfgRmapIndex Integer32
  ipCurCfgRmapLp Unsigned32
  ipCurCfgRmapMetric Unsigned32
  ipCurCfgRmapPrec INTEGER
  ipCurCfgRmapWeight INTEGER
  ipCurCfgRmapState INTEGER
  ipCurCfgRmapMetricType INTEGER
  ipCurCfgRmapAp DisplayString

IpNewCfgRmapEntry  
SEQUENCE    
  ipNewCfgRmapIndex Integer32
  ipNewCfgRmapLp Unsigned32
  ipNewCfgRmapMetric Unsigned32
  ipNewCfgRmapPrec INTEGER
  ipNewCfgRmapWeight INTEGER
  ipNewCfgRmapState INTEGER
  ipNewCfgRmapAp DisplayString
  ipNewCfgRmapMetricType INTEGER
  ipNewCfgRmapDelete INTEGER

IpCurCfgAlistEntry  
SEQUENCE    
  ipCurCfgAlistRmapIndex Integer32
  ipCurCfgAlistIndex Integer32
  ipCurCfgAlistNwf INTEGER
  ipCurCfgAlistMetric Unsigned32
  ipCurCfgAlistAction INTEGER
  ipCurCfgAlistState INTEGER

IpNewCfgAlistEntry  
SEQUENCE    
  ipNewCfgAlistRmapIndex Integer32
  ipNewCfgAlistIndex Integer32
  ipNewCfgAlistNwf INTEGER
  ipNewCfgAlistMetric Unsigned32
  ipNewCfgAlistAction INTEGER
  ipNewCfgAlistState INTEGER
  ipNewCfgAlistDelete INTEGER

IpCurCfgAspathEntry  
SEQUENCE    
  ipCurCfgAspathRmapIndex Integer32
  ipCurCfgAspathIndex Integer32
  ipCurCfgAspathAS INTEGER
  ipCurCfgAspathAction INTEGER
  ipCurCfgAspathState INTEGER

IpNewCfgAspathEntry  
SEQUENCE    
  ipNewCfgAspathRmapIndex Integer32
  ipNewCfgAspathIndex Integer32
  ipNewCfgAspathAS INTEGER
  ipNewCfgAspathAction INTEGER
  ipNewCfgAspathState INTEGER
  ipNewCfgAspathDelete INTEGER

OspfCurCfgAreaEntry  
SEQUENCE    
  ospfCurCfgAreaIndex Integer32
  ospfCurCfgAreaId IpAddress
  ospfCurCfgAreaSpfInterval INTEGER
  ospfCurCfgAreaAuthType INTEGER
  ospfCurCfgAreaType INTEGER
  ospfCurCfgAreaMetric INTEGER
  ospfCurCfgAreaStatus INTEGER

OspfNewCfgAreaEntry  
SEQUENCE    
  ospfNewCfgAreaIndex Integer32
  ospfNewCfgAreaId IpAddress
  ospfNewCfgAreaSpfInterval INTEGER
  ospfNewCfgAreaAuthType INTEGER
  ospfNewCfgAreaType INTEGER
  ospfNewCfgAreaMetric INTEGER
  ospfNewCfgAreaStatus INTEGER
  ospfNewCfgAreaDelete INTEGER

OspfCurCfgHostEntry  
SEQUENCE    
  ospfCurCfgHostIndex Integer32
  ospfCurCfgHostIpAddr IpAddress
  ospfCurCfgHostAreaIndex Integer32
  ospfCurCfgHostCost INTEGER
  ospfCurCfgHostState INTEGER

OspfNewCfgHostEntry  
SEQUENCE    
  ospfNewCfgHostIndex Integer32
  ospfNewCfgHostIpAddr IpAddress
  ospfNewCfgHostAreaIndex Integer32
  ospfNewCfgHostCost INTEGER
  ospfNewCfgHostState INTEGER
  ospfNewCfgHostDelete INTEGER

OspfCurCfgMdkeyEntry  
SEQUENCE    
  ospfCurCfgMdkeyIndex Integer32
  ospfCurCfgMdkeyKey DisplayString

OspfNewCfgMdkeyEntry  
SEQUENCE    
  ospfNewCfgMdkeyIndex Integer32
  ospfNewCfgMdkeyKey DisplayString
  ospfNewCfgMdkeyDelete INTEGER

OspfCurCfgIntfEntry  
SEQUENCE    
  ospfCurCfgIntfIndex Integer32
  ospfCurCfgIntfId IpAddress
  ospfCurCfgIntfArea INTEGER
  ospfCurCfgIntfMdkey INTEGER
  ospfCurCfgIntfCost INTEGER
  ospfCurCfgIntfPrio INTEGER
  ospfCurCfgIntfHello INTEGER
  ospfCurCfgIntfDead INTEGER
  ospfCurCfgIntfTrans INTEGER
  ospfCurCfgIntfRetra INTEGER
  ospfCurCfgIntfAuthKey DisplayString
  ospfCurCfgIntfStatus INTEGER

OspfNewCfgIntfEntry  
SEQUENCE    
  ospfNewCfgIntfIndex Integer32
  ospfNewCfgIntfId IpAddress
  ospfNewCfgIntfArea INTEGER
  ospfNewCfgIntfMdkey INTEGER
  ospfNewCfgIntfCost INTEGER
  ospfNewCfgIntfPrio INTEGER
  ospfNewCfgIntfHello INTEGER
  ospfNewCfgIntfDead INTEGER
  ospfNewCfgIntfTrans INTEGER
  ospfNewCfgIntfRetra INTEGER
  ospfNewCfgIntfAuthKey DisplayString
  ospfNewCfgIntfStatus INTEGER
  ospfNewCfgIntfDelete INTEGER

OspfCurCfgVirtIntfEntry  
SEQUENCE    
  ospfCurCfgVirtIntfIndex Integer32
  ospfCurCfgVirtIntfAreaId INTEGER
  ospfCurCfgVirtIntfNbr IpAddress
  ospfCurCfgVirtIntfMdkey INTEGER
  ospfCurCfgVirtIntfHello INTEGER
  ospfCurCfgVirtIntfDead INTEGER
  ospfCurCfgVirtIntfTrans INTEGER
  ospfCurCfgVirtIntfRetra INTEGER
  ospfCurCfgVirtIntfAuthKey DisplayString
  ospfCurCfgVirtIntfStatus INTEGER

OspfNewCfgVirtIntfEntry  
SEQUENCE    
  ospfNewCfgVirtIntfIndex Integer32
  ospfNewCfgVirtIntfAreaId INTEGER
  ospfNewCfgVirtIntfNbr IpAddress
  ospfNewCfgVirtIntfMdkey INTEGER
  ospfNewCfgVirtIntfHello INTEGER
  ospfNewCfgVirtIntfDead INTEGER
  ospfNewCfgVirtIntfTrans INTEGER
  ospfNewCfgVirtIntfRetra INTEGER
  ospfNewCfgVirtIntfAuthKey DisplayString
  ospfNewCfgVirtIntfStatus INTEGER
  ospfNewCfgVirtIntfDelete INTEGER

OspfCurCfgRangeEntry  
SEQUENCE    
  ospfCurCfgRangeIndex Integer32
  ospfCurCfgRangeAddr IpAddress
  ospfCurCfgRangeMask IpAddress
  ospfCurCfgRangeAreaIndex Integer32
  ospfCurCfgRangeHideState INTEGER
  ospfCurCfgRangeState INTEGER

OspfNewCfgRangeEntry  
SEQUENCE    
  ospfNewCfgRangeIndex Integer32
  ospfNewCfgRangeAddr IpAddress
  ospfNewCfgRangeMask IpAddress
  ospfNewCfgRangeAreaIndex Integer32
  ospfNewCfgRangeHideState INTEGER
  ospfNewCfgRangeState INTEGER
  ospfNewCfgRangeDelete INTEGER

IgmpStaticMrtrCurCfgTableEntry  
SEQUENCE    
  igmpStaticMrtrCurCfgIndx Integer32
  igmpStaticMrtrCurCfgPortId Integer32
  igmpStaticMrtrCurCfgVlanId Integer32
  igmpStaticMrtrCurCfgVersion INTEGER

IgmpStaticMrtrNewCfgTableEntry  
SEQUENCE    
  igmpStaticMrtrNewCfgIndx Integer32
  igmpStaticMrtrNewCfgPortId Integer32
  igmpStaticMrtrNewCfgVlanId Integer32
  igmpStaticMrtrNewCfgVersion INTEGER
  igmpStaticMrtrNewCfgDelete INTEGER

IgmpFltCurCfgTableEntry  
SEQUENCE    
  igmpFltCurCfgIndx Integer32
  igmpFltCurCfgMcastIp1 IpAddress
  igmpFltCurCfgMcastIp2 IpAddress
  igmpFltCurCfgAction INTEGER
  igmpFltCurCfgState INTEGER

IgmpFltNewCfgTableEntry  
SEQUENCE    
  igmpFltNewCfgIndx Integer32
  igmpFltNewCfgMcastIp1 IpAddress
  igmpFltNewCfgMcastIp2 IpAddress
  igmpFltNewCfgAction INTEGER
  igmpFltNewCfgState INTEGER
  igmpFltNewCfgDelete INTEGER

IgmpFltCurCfgPortTableEntry  
SEQUENCE    
  igmpFltCurCfgPortIndx Integer32
  igmpFltCurCfgPortState INTEGER
  igmpFltCurCfgPortFiltBmap OCTET STRING

IgmpFltNewCfgPortTableEntry  
SEQUENCE    
  igmpFltNewCfgPortIndx Integer32
  igmpFltNewCfgPortState INTEGER
  igmpFltNewCfgPortFiltBmap OCTET STRING
  igmpFltNewCfgPortAddFiltRule Integer32
  igmpFltNewCfgPortRemFiltRule Integer32

IfStatsEntry  
SEQUENCE    
  ifStatsIndex Integer32
  ifClearStats INTEGER

OspfAreaRxTxStatsEntry  
SEQUENCE    
  ospfAreaRxTxIndex Integer32
  ospfAreaRxPkts Counter32
  ospfAreaTxPkts Counter32
  ospfAreaRxHello Counter32
  ospfAreaTxHello Counter32
  ospfAreaRxDatabase Counter32
  ospfAreaTxDatabase Counter32
  ospfAreaRxlsReqs Counter32
  ospfAreaTxlsReqs Counter32
  ospfAreaRxlsAcks Counter32
  ospfAreaTxlsAcks Counter32
  ospfAreaRxlsUpdates Counter32
  ospfAreaTxlsUpdates Counter32

OspfAreaNbrChangeStatsEntry  
SEQUENCE    
  ospfAreaNbrIndex Integer32
  ospfAreaNbrhello Counter32
  ospfAreaNbrStart Counter32
  ospfAreaNbrAdjointOk Counter32
  ospfAreaNbrNegotiationDone Counter32
  ospfAreaNbrExchangeDone Counter32
  ospfAreaNbrBadRequests Counter32
  ospfAreaNbrBadSequence Counter32
  ospfAreaNbrLoadingDone Counter32
  ospfAreaNbrN1way Counter32
  ospfAreaNbrRstAd Counter32
  ospfAreaNbrDown Counter32
  ospfAreaNbrN2way Counter32

OspfAreaChangeStatsEntry  
SEQUENCE    
  ospfAreaIntfIndex Integer32
  ospfAreaIntfHello Counter32
  ospfAreaIntfDown Counter32
  ospfAreaIntfLoop Counter32
  ospfAreaIntfUnloop Counter32
  ospfAreaIntfWaitTimer Counter32
  ospfAreaIntfBackup Counter32
  ospfAreaIntfNbrChange Counter32

OspfAreaErrorStatsEntry  
SEQUENCE    
  ospfAreaErrIndex Integer32
  ospfAreaErrAuthFailure Counter32
  ospfAreaErrNetmaskMismatch Counter32
  ospfAreaErrHelloMismatch Counter32
  ospfAreaErrDeadMismatch Counter32
  ospfAreaErrOptionsMismatch Counter32
  ospfAreaErrUnknownNbr Counter32

OspfIntfRxTxStatsEntry  
SEQUENCE    
  ospfIntfRxTxIndex Integer32
  ospfIntfRxPkts Counter32
  ospfIntfTxPkts Counter32
  ospfIntfRxHello Counter32
  ospfIntfTxHello Counter32
  ospfIntfRxDatabase Counter32
  ospfIntfTxDatabase Counter32
  ospfIntfRxlsReqs Counter32
  ospfIntfTxlsReqs Counter32
  ospfIntfRxlsAcks Counter32
  ospfIntfTxlsAcks Counter32
  ospfIntfRxlsUpdates Counter32
  ospfIntfTxlsUpdates Counter32

OspfIntfNbrChangeStatsEntry  
SEQUENCE    
  ospfIntfNbrIndex Integer32
  ospfIntfNbrhello Counter32
  ospfIntfNbrStart Counter32
  ospfIntfNbrAdjointOk Counter32
  ospfIntfNbrNegotiationDone Counter32
  ospfIntfNbrExchangeDone Counter32
  ospfIntfNbrBadRequests Counter32
  ospfIntfNbrBadSequence Counter32
  ospfIntfNbrLoadingDone Counter32
  ospfIntfNbrN1way Counter32
  ospfIntfNbrRstAd Counter32
  ospfIntfNbrDown Counter32
  ospfIntfNbrN2way Counter32

OspfIntfChangeStatsEntry  
SEQUENCE    
  ospfIntfIndex Integer32
  ospfIntfHello Counter32
  ospfIntfDown Counter32
  ospfIntfLoop Counter32
  ospfIntfUnloop Counter32
  ospfIntfWaitTimer Counter32
  ospfIntfBackup Counter32
  ospfIntfNbrChange Counter32

OspfIntfErrorStatsEntry  
SEQUENCE    
  ospfIntfErrIndex Integer32
  ospfIntfErrAuthFailure Counter32
  ospfIntfErrNetmaskMismatch Counter32
  ospfIntfErrHelloMismatch Counter32
  ospfIntfErrDeadMismatch Counter32
  ospfIntfErrOptionsMismatch Counter32
  ospfIntfErrUnknownNbr Counter32

IgmpSnoopStatsEntry  
SEQUENCE    
  igmpSnoopVlanIndex Integer32
  rxIgmpValidPkts Counter32
  rxIgmpInvalidPkts Counter32
  rxIgmpGenQueries Counter32
  rxIgmpGrpSpecificQueries Counter32
  rxIgmpLeaves Counter32
  rxIgmpReports Counter32
  txIgmpGrpSpecificQueries Counter32
  txIgmpReports Counter32
  txIgmpLeaves Counter32
  igmpClearVlanStats INTEGER

IpRouteInfoEntry  
SEQUENCE    
  ipRouteInfoIndx Integer32
  ipRouteInfoDestIp IpAddress
  ipRouteInfoMask IpAddress
  ipRouteInfoGateway IpAddress
  ipRouteInfoTag INTEGER
  ipRouteInfoType INTEGER
  ipRouteInfoInterface Integer32
  ipRouteInfoMetric Integer32

AgArpInfoEntry  
SEQUENCE    
  arpInfoDestIp IpAddress
  arpInfoMacAddr PhysAddress
  arpInfoVLAN Integer32
  arpInfoSrcPort Integer32
  arpInfoRefPorts Integer32
  arpInfoFlag INTEGER

IgmpInfoEntry  
SEQUENCE    
  igmpInfoIndex Integer32
  igmpInfoGroupId IpAddress
  igmpInfoVlanId Integer32
  igmpInfoVersion INTEGER
  igmpInfoPortNum Integer32
  igmpInfoExpires DisplayString

IgmpMrtrInfoEntry  
SEQUENCE    
  igmpMrtrInfoIndex Integer32
  igmpMrtrInfoVlanId Integer32
  igmpMrtrInfoPortId Integer32
  igmpMrtrInfoVersion Integer32
  igmpMrtrInfoExpires DisplayString
  igmpMrtrInfoMrt Integer32

RipInfoIntfEntry  
SEQUENCE    
  ripInfoIntfIndex Integer32
  ripInfoIntfVersion INTEGER
  ripInfoIntfAddress IpAddress
  ripInfoIntfState INTEGER
  ripInfoIntfListen INTEGER
  ripInfoIntfTrigUpdate INTEGER
  ripInfoIntfMcastUpdate INTEGER
  ripInfoIntfPoisonReverse INTEGER
  ripInfoIntfSupply INTEGER
  ripInfoIntfMetric INTEGER
  ripInfoIntfAuth INTEGER
  ripInfoIntfKey DisplayString
  ripInfoIntfDefault INTEGER

IntfInfoEntry  
SEQUENCE    
  intfInfoIndex Integer32
  intfInfoAddr DisplayString
  intfInfoNetMask DisplayString
  intfInfoBcastAddr DisplayString
  intfInfoVlan Integer32
  intfInfoStatus INTEGER

GatewayInfoEntry  
SEQUENCE    
  gatewayInfoIndex Integer32
  gatewayInfoAddr IpAddress
  gatewayInfoStatus INTEGER

IpInfoNwfEntry  
SEQUENCE    
  ipInfoNwfIndex Integer32
  ipInfoNwfAddr IpAddress
  ipInfoNwfMask IpAddress
  ipInfoNwfState INTEGER

IpInfoRmapEntry  
SEQUENCE    
  ipInfoRmapIndex Integer32
  ipInfoRmapLp Unsigned32
  ipInfoRmapMetric Unsigned32
  ipInfoRmapPrec INTEGER
  ipInfoRmapWeight INTEGER
  ipInfoRmapState INTEGER
  ipInfoRmapAp DisplayString
  ipInfoRmapMetricType INTEGER

IpOspfAreaInfoEntry  
SEQUENCE    
  ipOspfAreaInfoIndex Integer32
  ipOspfAreaInfoId IpAddress
  ipOspfAreaInfoSpfInterval INTEGER
  ipOspfAreaInfoAuthType INTEGER
  ipOspfAreaInfoType INTEGER
  ipOspfAreaInfoMetric INTEGER
  ipOspfAreaInfoStatus INTEGER

IpOspfRangeInfoEntry  
SEQUENCE    
  ipOspfRangeInfoIndex Integer32
  ipOspfRangeInfoAddr IpAddress
  ipOspfRangeInfoMask IpAddress
  ipOspfRangeInfoAreaIndex Integer32
  ipOspfRangeInfoHideState INTEGER
  ipOspfRangeInfoState INTEGER

IpOspfIntfInfoEntry  
SEQUENCE    
  ipOspfIntfInfoIndex Integer32
  ipOspfIntfInfoId IpAddress
  ipOspfIntfInfoArea INTEGER
  ipOspfIntfInfoMdkey INTEGER
  ipOspfIntfInfoCost INTEGER
  ipOspfIntfInfoPrio INTEGER
  ipOspfIntfInfoHello INTEGER
  ipOspfIntfInfoDead INTEGER
  ipOspfIntfInfoTrans INTEGER
  ipOspfIntfInfoRetra INTEGER
  ipOspfIntfInfoAuthKey DisplayString
  ipOspfIntfInfoStatus INTEGER

IpOspfVirtIntfInfoEntry  
SEQUENCE    
  ipOspfVirtIntfInfoIndex Integer32
  ipOspfVirtIntfInfoAreaId INTEGER
  ipOspfVirtIntfInfoNbr IpAddress
  ipOspfVirtIntfInfoMdkey INTEGER
  ipOspfVirtIntfInfoHello INTEGER
  ipOspfVirtIntfInfoDead INTEGER
  ipOspfVirtIntfInfoTrans INTEGER
  ipOspfVirtIntfInfoRetra INTEGER
  ipOspfVirtIntfInfoAuthKey DisplayString
  ipOspfVirtIntfInfoStatus INTEGER

IpOspfHostInfoEntry  
SEQUENCE    
  ipOspfHostInfoIndex Integer32
  ipOspfHostInfoIpAddr IpAddress
  ipOspfHostInfoAreaIndex Integer32
  ipOspfHostInfoCost Integer32
  ipOspfHostInfoState INTEGER

IpOspfMd5keyInfoEntry  
SEQUENCE    
  ipOspfMd5keyInfoIndex Integer32
  ipOspfMd5keyInfoKey DisplayString

VrrpInfoVirtRtrTableEntry  
SEQUENCE    
  vrrpInfoVirtRtrIndex Integer32
  vrrpInfoVirtRtrConfig INTEGER
  vrrpInfoVirtRtrID INTEGER
  vrrpInfoVirtRtrAddr IpAddress
  vrrpInfoVirtRtrIfIndex Integer32
  vrrpInfoVirtRtrOwnership INTEGER
  vrrpInfoVirtRtrPriority INTEGER
  vrrpInfoVirtRtrState INTEGER
  vrrpInfoVirtRtrServer INTEGER
  vrrpInfoVirtRtrProxy INTEGER

OspfAreaInfoEntry  
SEQUENCE    
  ospfAreaInfoIndex Integer32
  ospfAreaInfoId IpAddress
  ospfAreaInfoStatus INTEGER
  ospfTotalNumberOfInterfaces Integer32
  ospfNumberOfInterfacesUp Integer32
  ospfAreaInfoAuthType INTEGER
  ospfAreaInfoSPF Integer32
  ospfNumberOfLsdbEntries Integer32
  ospfAreaInfoAreaBorderRouter Integer32
  ospfAreaInfoASBoundaryRouter Integer32
  ospfAreaInfoTotalNeighbours Integer32

OspfIntfInfoEntry  
SEQUENCE    
  ospfIfInfoIndex Integer32
  ospfIfInfoIpAddress IpAddress
  ospfIfInfoArea INTEGER
  ospfIfInfoAdminStatus INTEGER
  ospfIfInfoRouterID IpAddress
  ospfIfInfoState INTEGER
  ospfIfInfoPriority INTEGER
  ospfIfInfoDesignatedRouterID IpAddress
  ospfIfInfoDesignatedRouterIpAddress IpAddress
  ospfIfInfoBackupDesignatedRouterID IpAddress
  ospfIfInfoBackupDesignatedRouterIpAddress IpAddress
  ospfIfInfoHello INTEGER
  ospfIfInfoDead INTEGER
  ospfIfInfoWait Integer32
  ospfIfInfoRetransmit INTEGER
  ospfIfInfoTransitDelay INTEGER
  ospfIfInfoTotalNeighbours Integer32
  ospfIfInfoEvents Integer32
  ospfIfInfoAuthType INTEGER

OspfIfNbrEntry  
SEQUENCE    
  ospfIfNbrIntfIndex Integer32
  ospfIfNbrIpAddr IpAddress
  ospfIfNbrPriority Integer32
  ospfIfNbrState INTEGER
  ospfIfNbrDesignatedRtr IpAddress
  ospfIfNbrBackupDesignatedRtr IpAddress
  ospfIfNbrIpAddress IpAddress

VrrpOperVirtRtrEntry  
SEQUENCE    
  vrrpOperVirtRtrIndex Integer32
  vrrpOperVirtRtrBackup INTEGER

Defined Values

layer3 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3
The MIB module for the Layer 3 configuration, statistics and information .
MODULE-IDENTITY    

layer3Configs 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1
OBJECT IDENTIFIER    

layer3Stats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2
OBJECT IDENTIFIER    

layer3Info 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3
OBJECT IDENTIFIER    

layer3Oper 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.4
OBJECT IDENTIFIER    

ipInterfaceCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1
OBJECT IDENTIFIER    

ipGatewayCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2
OBJECT IDENTIFIER    

ipStaticRouteCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3
OBJECT IDENTIFIER    

ipForwardCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.4
OBJECT IDENTIFIER    

ripCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5
OBJECT IDENTIFIER    

vrrpCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6
OBJECT IDENTIFIER    

arpCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7
OBJECT IDENTIFIER    

ipBootpCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8
OBJECT IDENTIFIER    

dnsCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.9
OBJECT IDENTIFIER    

ipNwfCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10
OBJECT IDENTIFIER    

ipRmapCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11
OBJECT IDENTIFIER    

ospfCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13
OBJECT IDENTIFIER    

ipGeneralCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.14
OBJECT IDENTIFIER    

igmpCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15
OBJECT IDENTIFIER    

rip2Cfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18
OBJECT IDENTIFIER    

ripStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.1
OBJECT IDENTIFIER    

arpStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.2
OBJECT IDENTIFIER    

routeStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.3
OBJECT IDENTIFIER    

vrrpStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4
OBJECT IDENTIFIER    

ospfStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5
OBJECT IDENTIFIER    

clearStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.6
OBJECT IDENTIFIER    

igmpStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7
OBJECT IDENTIFIER    

rip2Stats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13
OBJECT IDENTIFIER    

dnsStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.14
OBJECT IDENTIFIER    

geal3Stats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.15
OBJECT IDENTIFIER    

ipRoutingInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1
OBJECT IDENTIFIER    

arpInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2
OBJECT IDENTIFIER    

vrrpInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3
OBJECT IDENTIFIER    

ospfInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4
OBJECT IDENTIFIER    

igmpInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5
OBJECT IDENTIFIER    

rip2Info 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7
OBJECT IDENTIFIER    

ipInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8
OBJECT IDENTIFIER    

vrrpOper 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.4.1
OBJECT IDENTIFIER    

ipInterfaceTableMax 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.1
The maximum number of rows in the IP interface table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2
The table of IP interface configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCurCfgIntfEntry

ipCurCfgIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1
A row in the Ip interface table
Status: current Access: not-accessible
OBJECT-TYPE    
  IpCurCfgIntfEntry  

ipCurCfgIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1.1
The interface number for which the IP information is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgIntfAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1.2
The IP address of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgIntfMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1.3
The subnet mask of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgIntfBroadcast 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1.4
The broadcast address of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgIntfVlan 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1.5
The VLAN associated with the interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4095  

ipCurCfgIntfState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1.6
The state of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipCurCfgIntfBootpRelay 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.2.1.7
Enable/disable BOOTP relay.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipNewCfgIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3
The table of interface configuration in the New Configuration Block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpNewCfgIntfEntry

ipNewCfgIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1
A row in the Ip interface table
Status: current Access: not-accessible
OBJECT-TYPE    
  IpNewCfgIntfEntry  

ipNewCfgIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.1
The interface number for which the IP information is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipNewCfgIntfAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.2
The IP address of the interface.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipNewCfgIntfMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.3
The subnet mask of the interface.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipNewCfgIntfBroadcast 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.4
The broadcast address of the interface.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipNewCfgIntfVlan 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.5
The VLAN associated with the interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..4095  

ipNewCfgIntfState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.6
The state of the interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipNewCfgIntfDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.7
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipNewCfgIntfBootpRelay 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.1.3.1.8
Enable/disable BOOTP relay.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipGatewayTableMax 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.3
The maximum number of rows in the IP gateway table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgGwTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4
The table of gateways in the Current configuration Block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCurCfgGwEntry

ipCurCfgGwEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4.1
A row in the Ip gateway table
Status: current Access: not-accessible
OBJECT-TYPE    
  IpCurCfgGwEntry  

ipCurCfgGwIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4.1.1
The gateway number for which the information is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgGwAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4.1.2
The IP address of the default gateway.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgGwInterval 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4.1.3
The interval between ping attempts.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..60  

ipCurCfgGwRetry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4.1.4
The number of failed attempts to declare the default gateway DOWN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..120  

ipCurCfgGwState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4.1.5
The state of the default gateway.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipCurCfgGwArp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.4.1.6
The state of ARP only health checks.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipNewCfgGwTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5
The table of gateway configuration in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpNewCfgGwEntry

ipNewCfgGwEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1
A row in the Ip default gateway table
Status: current Access: not-accessible
OBJECT-TYPE    
  IpNewCfgGwEntry  

ipNewCfgGwIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1.1
The gateway number for which the information is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipNewCfgGwAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1.2
The IP address of the default gateway.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipNewCfgGwInterval 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1.3
The interval in seconds between ping attempts.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..60  

ipNewCfgGwRetry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1.4
The number of failed attempts to declare the default gateway DOWN.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..120  

ipNewCfgGwState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1.5
The state of the default gateway.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipNewCfgGwDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1.6
When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipNewCfgGwArp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.2.5.1.7
The state of the ARP only health checks.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipStaticRouteTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.1
The maximum number of rows in the Static Route table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgStaticRouteTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.2
The table of static routes in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCurCfgStaticRouteEntry

ipCurCfgStaticRouteEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.2.1
A row in the static IP route table
Status: current Access: not-accessible
OBJECT-TYPE    
  IpCurCfgStaticRouteEntry  

ipCurCfgStaticRouteIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.2.1.1
The index of the static routing table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgStaticRouteDestIp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.2.1.2
The destination IP address of this route.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgStaticRouteMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.2.1.3
The destination IP address of this route.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgStaticRouteGateway 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.2.1.4
The destination IP address of this route.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgStaticRouteInterface 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.2.1.5
The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipNewCfgStaticRouteTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3
The table of static routes in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpNewCfgStaticRouteEntry

ipNewCfgStaticRouteEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3.1
A row in the static IP route table
Status: current Access: not-accessible
OBJECT-TYPE    
  IpNewCfgStaticRouteEntry  

ipNewCfgStaticRouteIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3.1.1
The index of the static routing table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipNewCfgStaticRouteDestIp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3.1.2
The destination IP address of this route.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipNewCfgStaticRouteMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3.1.3
The subnet mask of this route.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipNewCfgStaticRouteGateway 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3.1.4
The IP address of the gateway for this route.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipNewCfgStaticRouteAction 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3.1.5
When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipNewCfgStaticRouteInterface 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.3.3.1.6
The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

ripCurCfgSupply 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.1
Enable or disable supplying route updates.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripNewCfgSupply 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.2
Enable or disable supplying route updates.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripCurCfgListen 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.3
Enable or disable listening to route updates.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripNewCfgListen 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.4
Enable or disable listening to route updates.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripCurCfgDefListen 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.5
Enable or disable listening to default routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripNewCfgDefListen 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.6
Enable or disable listening to default routes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripCurCfgStaticSupply 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.7
Enable or disable supplying static route updates.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripNewCfgStaticSupply 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.8
Enable or disable supplying static route updates.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripCurCfgUpdatePeriod 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.9
Update Period in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..120  

ripNewCfgUpdatePeriod 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.10
Update period in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..120  

ripCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.11
RIP global state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(2), off(3)  

ripNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.12
Globally turn RIP on or off.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

ripCurCfgPoisonReverse 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.13
RIP poison reverse.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripNewCfgPoisonReverse 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.14
RIP poison reverse.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripCurCfgSplitHorizon 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.15
RIP split horizon.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripNewCfgSplitHorizon 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.16
RIP split horizon.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripCurCfgIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1
The table of RIP on IP interface configuration in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RipCurCfgIntfEntry

ripCurCfgIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1
Information about RIP on IP interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  RipCurCfgIntfEntry  

ripCurCfgIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.1
The interface number for which the RIP information is related.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ripCurCfgIntfVersion 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.2
RIP version.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ripVersion1(1), ripVersion2(2)  

ripCurCfgIntfSupply 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.3
Enable or disable supplying route updates.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripCurCfgIntfListen 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.4
Enable or disable listening to route updates.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripCurCfgIntfDefault 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.5
Specifies what RIP does with default routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER both(1), listen(2), supply(3), none(4)  

ripCurCfgIntfTrigUpdate 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.6
Enable or disable tirggered updates.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripCurCfgIntfMcastUpdate 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.7
Enable or disable multicast updates.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripCurCfgIntfPoisonReverse 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.8
RIP poison reverse.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripCurCfgIntfState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.9
Enable or disable RIP protocol.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripCurCfgIntfMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.10
RIP route metric for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

ripCurCfgIntfAuth 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.11
Enable or disable RIP update authorization with a simple plain text password.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), password(2)  

ripCurCfgIntfKey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.12
RIP update authencation password.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

ripCurCfgIntfSplitHorizon 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.13
RIP split horizon.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripNewCfgIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2
The table of RIP on IP interface configuration in the new_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RipNewCfgIntfEntry

ripNewCfgIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1
Information about RIP on IP interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  RipNewCfgIntfEntry  

ripNewCfgIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.1
The interface number for which the RIP information is related.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ripNewCfgIntfVersion 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.2
RIP version.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ripVersion1(1), ripVersion2(2)  

ripNewCfgIntfSupply 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.3
Enable or disable supplying route updates.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripNewCfgIntfListen 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.4
Enable or disable listening to route updates.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripNewCfgIntfDefault 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.5
Specifies what RIP does with default routes. The default routes action could be set to listen/supply/both/none.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER both(1), listen(2), supply(3), none(4)  

ripNewCfgIntfTrigUpdate 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.6
Enable or disable tirggered updates.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripNewCfgIntfMcastUpdate 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.7
Enable or disable multicast updates.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripNewCfgIntfPoisonReverse 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.8
RIP poison reverse.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripNewCfgIntfState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.9
Enable or disable RIP protocol.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripNewCfgIntfMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.10
RIP route metric for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

ripNewCfgIntfAuth 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.11
Enable or disable RIP update authorization with a simple plain text password.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), password(2)  

ripNewCfgIntfKey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.12
RIP update authencation password.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

ripNewCfgIntfSplitHorizon 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.2.1.13
RIP split horizon.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ripGeneral 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.3
OBJECT IDENTIFIER    

rip2CurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.3.1
RIP global state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

rip2NewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.3.2
Globally turn RIP on or off.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

rip2CurCfgUpdatePeriod 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.3.3
Update Period in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..120  

rip2NewCfgUpdatePeriod 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.3.4
Update Period in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..120  

ripRouteRedistribution 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4
OBJECT IDENTIFIER    

ripRedistributeStatic 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.1
OBJECT IDENTIFIER    

ripCurCfgStaticMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.1.1
The metric to be assigned to static routes. A value of 0 indicates none.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

ripNewCfgStaticMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.1.2
The metric to be assigned to static routes. A value of 0 indicates none.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

ripCurCfgStaticOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.1.5
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ripNewCfgStaticOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.1.6
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ripNewCfgStaticAddOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.1.7
The route map to be add into out-rmap list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ripNewCfgStaticRemoveOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.1.8
The route map to be removed from out-rmap list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ripRedistributeFixed 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.4
OBJECT IDENTIFIER    

ripCurCfgFixedMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.4.1
The export metric for fixed routes. A value of 0 indicates none
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

ripNewCfgFixedMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.4.2
The export metric for fixed routes. A value of 0 indicates none
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

ripCurCfgFixedOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.4.5
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ripNewCfgFixedOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.4.6
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ripNewCfgFixedAddOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.4.7
The route map to be add into out-rmap list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ripNewCfgFixedRemoveOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.4.8
The route map to be removed from out-rmap list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ripRedistributeOspf 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.5
OBJECT IDENTIFIER    

ripCurCfgOspfMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.5.1
The export metric for RIP routes. A value of 0 indicates none
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

ripNewCfgOspfMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.5.2
The export metric for RIP routes. A value of 0 indicates none
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

ripCurCfgOspfOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.5.5
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ripNewCfgOspfOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.5.6
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ripNewCfgOspfAddOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.5.7
The route map to be add into out-rmap list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ripNewCfgOspfRemoveOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.5.8
The route map to be removed from out-rmap list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ripRedistributeEospf 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.6
OBJECT IDENTIFIER    

ripCurCfgEospfMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.6.1
The export metric for RIP routes. A value of 0 indicates none
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

ripNewCfgEospfMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.6.2
The export metric for RIP routes. A value of 0 indicates none
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

ripCurCfgEospfOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.6.5
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ripNewCfgEospfOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.6.6
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ripNewCfgEospfAddOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.6.7
The route map to be add into out-rmap list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ripNewCfgEospfRemoveOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.4.6.8
The route map to be removed from out-rmap list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ipFwdGeneralCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.4.1
OBJECT IDENTIFIER    

ipFwdCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.4.1.1
IP forwarding global state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(2), off(3)  

ipFwdNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.4.1.2
IP forwarding global state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(2), off(3)  

ipFwdCurCfgDirectedBcast 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.4.1.3
Enable or disable forwarding directed broadcasts.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipFwdNewCfgDirectedBcast 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.4.1.4
Enable or disable forwarding directed broadcasts.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

arpCurCfgReARPPeriod 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.1
Re-ARP Period in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 2..120  

arpNewCfgReARPPeriod 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.2
Re-ARP Period in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 2..120  

ipStaticArpTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.3
The maximum number of rows in the Static ARP table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..128  

ipCurCfgStaticArpTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.4
The table of static ARPs in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCurCfgStaticArpEntry

ipCurCfgStaticArpEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.4.1
A row in the static ARP table
Status: current Access: not-accessible
OBJECT-TYPE    
  IpCurCfgStaticArpEntry  

ipCurCfgStaticArpIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.4.1.1
The index of the static ARP table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgStaticArpIp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.4.1.2
The IP address for the ARP entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgStaticArpMAC 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.4.1.3
The MAC address for the ARP entry.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

ipCurCfgStaticArpVlan 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.4.1.4
The VLAN for the ARP entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4090  

ipCurCfgStaticArpPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.4.1.5
The port for the ARP entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipNewCfgStaticArpTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5
The table of static ARPs in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpNewCfgStaticArpEntry

ipNewCfgStaticArpEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5.1
A row in the static ARP table
Status: current Access: not-accessible
OBJECT-TYPE    
  IpNewCfgStaticArpEntry  

ipNewCfgStaticArpIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5.1.1
The index of the static ARP table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipNewCfgStaticArpIp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5.1.2
The IP address for the ARP entry.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipNewCfgStaticArpMAC 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5.1.3
The MAC address for the ARP entry.
Status: current Access: read-create
OBJECT-TYPE    
  PhysAddress  

ipNewCfgStaticArpVlan 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5.1.4
The VLAN for the ARP entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..4090  

ipNewCfgStaticArpPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5.1.5
The port for the ARP entry.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

ipNewCfgStaticArpAction 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.7.5.1.6
When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipCurCfgBootpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.1
The IP address of BOOTP server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipNewCfgBootpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.2
The IP address of BOOTP server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipCurCfgBootpAddr2 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.3
The IP address of second BOOTP server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipNewCfgBootpAddr2 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.4
The IP address of second BOOTP server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipCurCfgBootpState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.5
The state of BOOTP relay.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipNewCfgBootpState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.6
The state of BOOTP relay.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipCurCfgDhcpOpt82State 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.7
The state of DHCP relay agent information.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipNewCfgDhcpOpt82State 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.8.8
The state of DHCP relay agent information.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vrrpGeneral 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1
OBJECT IDENTIFIER    

vrrpCurCfgGenState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.1
Enable or disable VRRP operation globally.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgGenState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.2
Enable or disable VRRP operation globally.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgGenTckVirtRtrInc 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.3
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..254  

vrrpNewCfgGenTckVirtRtrInc 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.4
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

vrrpCurCfgGenTckIpIntfInc 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.5
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..254  

vrrpNewCfgGenTckIpIntfInc 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.6
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

vrrpCurCfgGenTckVlanPortInc 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.7
The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..254  

vrrpNewCfgGenTckVlanPortInc 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.8
The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

vrrpCurCfgGenTckL4PortInc 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.9
The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as a VRRP virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..254  

vrrpNewCfgGenTckL4PortInc 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.10
The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as a VRRP virtual router.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

vrrpCurCfgGenTckRServerInc 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.11
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a VRRP virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..254  

vrrpNewCfgGenTckRServerInc 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.12
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a VRRP virtual router.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

vrrpCurCfgGenTckHsrpInc 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.13
The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..254  

vrrpNewCfgGenTckHsrpInc 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.14
The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

vrrpCurCfgGenHotstandby 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.15
Enable or disable hotstandby processing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgGenHotstandby 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.16
Enable or disable hotstandby processing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgGenTckHsrvInc 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.17
The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements by VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..254  

vrrpNewCfgGenTckHsrvInc 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.1.18
The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements by VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

vrrpVirtRtrTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.2
The maximum number of entries in VRRP virtual router table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vrrpCurCfgVirtRtrTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3
The table of VRRP virtual routers configuration in current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpCurCfgVirtRtrTableEntry

vrrpCurCfgVirtRtrTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1
Information about a VRRP virtual router.
Status: current Access: not-accessible
OBJECT-TYPE    
  VrrpCurCfgVirtRtrTableEntry  

vrrpCurCfgVirtRtrIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.1
The VRRP virtual router table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vrrpCurCfgVirtRtrID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.2
The VRRP virtual router identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

vrrpCurCfgVirtRtrAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.3
The VRRP virtual router IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vrrpCurCfgVirtRtrIfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.4
The IfIndex that the VRRP virtual router is representing.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vrrpCurCfgVirtRtrInterval 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.5
The time interval between VRRP advertisements in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

vrrpCurCfgVirtRtrPriority 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.6
The priority value to be used by the specified VRRP virtual routers.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

vrrpCurCfgVirtRtrPreempt 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.7
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.8
Enable or disable the VRRP virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrSharing 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.9
Enable or disable load sharing of non-master virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrTckVirtRtr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.10
Enable or disable tracking other virtual routers for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrTckIpIntf 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.11
Enable or disable tracking other router interfaces for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrTckVlanPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.12
Enable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrTckL4Port 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.13
Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrTckRServer 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.14
Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrTckHsrp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.15
Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrTckHsrv 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.3.1.16
Enable or disable tracking HSRP advertisements by VLAN for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4
The table of VRRP virtual routers configuration in current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpNewCfgVirtRtrTableEntry

vrrpNewCfgVirtRtrTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1
Information about a VRRP virtual router.
Status: current Access: not-accessible
OBJECT-TYPE    
  VrrpNewCfgVirtRtrTableEntry  

vrrpNewCfgVirtRtrIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.1
The VRRP virtual router table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vrrpNewCfgVirtRtrID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.2
The VRRP virtual router identifier.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

vrrpNewCfgVirtRtrAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.3
The VRRP virtual router IP address.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vrrpNewCfgVirtRtrIfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.4
The IfIndex that the VRRP virtual router is representing.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

vrrpNewCfgVirtRtrInterval 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.5
The time interval between VRRP advertisements in seconds.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..255  

vrrpNewCfgVirtRtrPriority 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.6
The priority value to be used by the specified VRRP virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..254  

vrrpNewCfgVirtRtrPreempt 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.7
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.8
Enable or disable the VRRP virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.9
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

vrrpNewCfgVirtRtrSharing 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.10
Enable or disable load sharing of non-master virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTckVirtRtr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.11
Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTckIpIntf 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.12
Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTckVlanPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.13
Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTckL4Port 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.14
Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTckRServer 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.15
Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTckHsrp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.16
Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrTckHsrv 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.4.1.17
Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpIfTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.5
The maximum number of entries in VRRP interface table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vrrpCurCfgIfTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.6
The table of VRRP interface configuration in current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpCurCfgIfTableEntry

vrrpCurCfgIfTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.6.1
Information about a VRRP interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  VrrpCurCfgIfTableEntry  

vrrpCurCfgIfIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.6.1.1
The VRRP interface index. This is eqivalent to IfIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vrrpCurCfgIfAuthType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.6.1.2
Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpCurCfgIfPasswd for authentication.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), simple-text-password(2)  

vrrpCurCfgIfPasswd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.6.1.3
The password for authentication.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..7)  

vrrpNewCfgIfTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.7
The table of VRRP interface configuration in current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpNewCfgIfTableEntry

vrrpNewCfgIfTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.7.1
Information about a VRRP interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  VrrpNewCfgIfTableEntry  

vrrpNewCfgIfIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.7.1.1
The VRRP interface index. This is eqivalent to IfIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vrrpNewCfgIfAuthType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.7.1.2
Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpNewCfgIfPasswd for authentication.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), simple-text-password(2)  

vrrpNewCfgIfPasswd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.7.1.3
The password for authentication.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..7)  

vrrpNewCfgIfDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.7.1.4
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

vrrpVirtRtrGrpTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.8
The maximum number of entries in VRRP Group table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vrrpCurCfgVirtRtrGrpTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9
The table of VRRP virtual router group in current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpCurCfgVirtRtrGrpTableEntry

vrrpCurCfgVirtRtrGrpTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1
Information about a VRRP failover virtual router.
Status: current Access: not-accessible
OBJECT-TYPE    
  VrrpCurCfgVirtRtrGrpTableEntry  

vrrpCurCfgVirtRtrGrpIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.1
The VRRP virtual router table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vrrpCurCfgVirtRtrGrpID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.2
The VRRP virtual router identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

vrrpCurCfgVirtRtrGrpIfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.3
The IfIndex that the VRRP virtual router is representing.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vrrpCurCfgVirtRtrGrpInterval 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.4
The time interval between VRRP advertisements in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

vrrpCurCfgVirtRtrGrpPriority 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.5
The priority value to be used by the specified VRRP virtual routers.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

vrrpCurCfgVirtRtrGrpPreempt 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.6
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.7
Enable or disable the VRRP virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpSharing 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.8
Enable or disable load sharing of non-master virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpTckVirtRtr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.9
Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpTckIpIntf 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.10
Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpTckVlanPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.11
Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpTckL4Port 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.12
Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpTckRServer 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.13
Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpTckHsrp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.14
Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpCurCfgVirtRtrGrpTckHsrv 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.9.1.15
Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10
The table of VRRP virtual router group configuration in new_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpNewCfgVirtRtrGrpTableEntry

vrrpNewCfgVirtRtrGrpTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1
Information about a VRRP failover virtual router.
Status: current Access: not-accessible
OBJECT-TYPE    
  VrrpNewCfgVirtRtrGrpTableEntry  

vrrpNewCfgVirtRtrGrpIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.1
The VRRP virtual router table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vrrpNewCfgVirtRtrGrpID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.2
The VRRP virtual router identifier.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..255  

vrrpNewCfgVirtRtrGrpIfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.3
The IfIndex that the VRRP virtual router is representing.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

vrrpNewCfgVirtRtrGrpInterval 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.4
The time interval between VRRP advertisements in seconds.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..255  

vrrpNewCfgVirtRtrGrpPriority 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.5
The priority value to be used by the specified VRRP virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..254  

vrrpNewCfgVirtRtrGrpPreempt 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.6
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.7
Enable or disable the VRRP virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.8
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

vrrpNewCfgVirtRtrGrpSharing 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.9
Enable or disable load sharing of non-master virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTckVirtRtr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.10
Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTckIpIntf 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.11
Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTckVlanPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.12
Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTckL4Port 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.13
Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTckRServer 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.14
Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTckHsrp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.15
Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpNewCfgVirtRtrGrpTckHsrv 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.6.10.1.16
Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dnsCurCfgPrimaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.9.1
The DNS primary IP address in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

dnsNewCfgPrimaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.9.2
The DNS primary IP address in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dnsCurCfgSecondaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.9.3
The DNS primary IP address in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

dnsNewCfgSecondaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.9.4
The DNS primary IP address in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dnsCurCfgDomainName 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.9.5
The DNS doamin name in the current_configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..191)  

dnsNewCfgDomainName 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.9.6
The DNS doamin name in the new_configuration block.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..191)  

ipNwfTableMax 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.1
The maximum number of rows in the IP network filter table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgNwfTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.2
The table of IP network filter configuration in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCurCfgNwfEntry

ipCurCfgNwfEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.2.1
Information about an IP network filter.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpCurCfgNwfEntry  

ipCurCfgNwfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.2.1.1
The netowrk filter number for which the NWF is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgNwfAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.2.1.2
The IP address of the network filter.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgNwfMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.2.1.3
The subnet mask of the network filter.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipCurCfgNwfState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.2.1.4
Enable or disable the network filter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipNewCfgNwfTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.3
The table of IP network filter configuration in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpNewCfgNwfEntry

ipNewCfgNwfEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.3.1
Information about an IP network filter.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpNewCfgNwfEntry  

ipNewCfgNwfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.3.1.1
The netowrk filter number for which the NWF is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipNewCfgNwfAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.3.1.2
The IP address of the network filter.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipNewCfgNwfMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.3.1.3
The subnet mask of the network filter.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ipNewCfgNwfState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.3.1.4
Enable or disable the network filter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipNewCfgNwfDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.10.3.1.5
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipRmapTableMax 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.1
The maximum number of rows in the IP route map table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgRmapTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2
The table of IP route map configuration in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCurCfgRmapEntry

ipCurCfgRmapEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1
Information about an IP route map.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpCurCfgRmapEntry  

ipCurCfgRmapIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.1
The route map number for which the RMAP is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgRmapLp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.2
The local-preference of the route map. 4294967295 means none
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

ipCurCfgRmapMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.3
The metric of the route map. 4294967295 means none
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

ipCurCfgRmapPrec 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.4
The precedence of the route map.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

ipCurCfgRmapWeight 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.5
The weight of the route map. 65535 means none
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

ipCurCfgRmapState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.6
Enable or disable the route map.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipCurCfgRmapAp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.7
The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is: [][ ]
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..18)  

ipCurCfgRmapMetricType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.2.1.8
The OSPF metric-type of the matched route.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ipNewCfgRmapTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3
The table of IP route map configuration in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpNewCfgRmapEntry

ipNewCfgRmapEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1
Information about an IP route map.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpNewCfgRmapEntry  

ipNewCfgRmapIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.1
The route map number for which the RMAP is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipNewCfgRmapLp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.2
The local-preference of the route map. 4294967295 means none
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

ipNewCfgRmapMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.3
The metric of the route map. 4294967295 means none
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

ipNewCfgRmapPrec 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.4
The precedence of the route map.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..255  

ipNewCfgRmapWeight 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.5
The weight of the route map. 65535 means none
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

ipNewCfgRmapState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.6
Enable or disable the route map.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipNewCfgRmapAp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.7
The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is: [][ ]
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..18)  

ipNewCfgRmapMetricType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.8
The OSPF metric-type of the matched route.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ipNewCfgRmapDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.3.1.9
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipAlistTableMax 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.4
The maximum number of rows in the IP route map table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgAlistTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5
The table of IP route map access list configuration in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCurCfgAlistEntry

ipCurCfgAlistEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5.1
Information about an IP route map.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpCurCfgAlistEntry  

ipCurCfgAlistRmapIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5.1.1
The route map number for which the RMAP is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgAlistIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5.1.2
The access list number for which the access list is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgAlistNwf 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5.1.3
The network filter number of the route map access list. 0 means none
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..256  

ipCurCfgAlistMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5.1.4
The metric of the route map access list. 4294967295 means none
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

ipCurCfgAlistAction 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5.1.5
Action of the route map access list.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

ipCurCfgAlistState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.5.1.6
Enable or disable the route map access list.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipNewCfgAlistTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6
The table of IP route map access list configuration in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpNewCfgAlistEntry

ipNewCfgAlistEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1
Information about an IP route map.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpNewCfgAlistEntry  

ipNewCfgAlistRmapIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1.1
The route map number for which the RMAP is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipNewCfgAlistIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1.2
The access list number for which the access list is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipNewCfgAlistNwf 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1.3
The network filter number of the route map access list. 0 means none
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..256  

ipNewCfgAlistMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1.4
The metric of the route map access list. 4294967295 means none
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

ipNewCfgAlistAction 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1.5
Action of the route map access list.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

ipNewCfgAlistState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1.6
Enable or disable the route map access list.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipNewCfgAlistDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.6.1.7
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ipAspathTableMax 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.7
The maximum number of rows in the IP route map table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgAspathTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.8
The table of IP route map access path configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpCurCfgAspathEntry

ipCurCfgAspathEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.8.1
Information about an IP route map.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpCurCfgAspathEntry  

ipCurCfgAspathRmapIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.8.1.1
The route map number for which the RMAP is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgAspathIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.8.1.2
The access path number for which the access list is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipCurCfgAspathAS 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.8.1.3
The AS number of the route map access path. 0 means none
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

ipCurCfgAspathAction 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.8.1.4
Action of the route map access path.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

ipCurCfgAspathState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.8.1.5
Enable or disable the route map access path.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipNewCfgAspathTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9
The table of IP route map access path configuration
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpNewCfgAspathEntry

ipNewCfgAspathEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9.1
Information about an IP route map.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpNewCfgAspathEntry  

ipNewCfgAspathRmapIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9.1.1
The route map number for which the RMAP is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipNewCfgAspathIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9.1.2
The access path number for which the access list is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipNewCfgAspathAS 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9.1.3
The AS number of the route map access path. 0 means none
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

ipNewCfgAspathAction 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9.1.4
Action of the route map access path.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

ipNewCfgAspathState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9.1.5
Enable or disable the route map access path.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipNewCfgAspathDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.11.9.1.6
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ospfGeneral 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1
OBJECT IDENTIFIER    

ospfCurCfgDefaultRouteMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.1
Specify the metric to be assigned.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

ospfNewCfgDefaultRouteMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.2
Specify the metric to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

ospfCurCfgDefaultRouteMetricType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.3
Specify the AS External metric type to be assigned.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ospfNewCfgDefaultRouteMetricType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.4
Specify the AS External metric type to be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ospfIntfTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.5
The maximum number of rows in the OSPF Interface table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfAreaTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.6
The maximum number of rows in the OSPF Area table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfRangeTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.7
The maximum number of rows in the OSPF Range table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfVirtIntfTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.8
The maximum number of rows in the OSPF Virtual Interface table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfHostTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.9
The maximum number of rows in the OSPF Host table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.10
OSPF global state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

ospfNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.1.11
Globally turn OSPF on or off.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

ospfCurCfgAreaTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2
The table of OSPF Area configuration in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfCurCfgAreaEntry

ospfCurCfgAreaEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1
Information about a OSPF area.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfCurCfgAreaEntry  

ospfCurCfgAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1.1
The OSPF area number for which the OSPF area table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfCurCfgAreaId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1.2
The IP Address of the OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfCurCfgAreaSpfInterval 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1.3
The SPF interval for the OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

ospfCurCfgAreaAuthType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1.4
Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), password(2), md5(3)  

ospfCurCfgAreaType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1.5
Type of Area. transit(0) stub(1) nssa(2)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER transit(0), stub(1), nssa(2)  

ospfCurCfgAreaMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1.6
Metric (1-65535)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ospfCurCfgAreaStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.2.1.7
Status disabled(0) enabled(1)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

ospfNewCfgAreaTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3
The table of OSPF Area configuration in the new_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfNewCfgAreaEntry

ospfNewCfgAreaEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1
Information about a OSPF area.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfNewCfgAreaEntry  

ospfNewCfgAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.1
The OSPF area number for which the OSPF area table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfNewCfgAreaId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.2
The IP Address of the OSPF area.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ospfNewCfgAreaSpfInterval 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.3
The SPF interval for the OSPF area.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

ospfNewCfgAreaAuthType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.4
Type of authentication being used. none(1) - no authentication password(2) - use password. md5(3) - use MD5 authentication.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), password(2), md5(3)  

ospfNewCfgAreaType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.5
Type of Area. transit(0) stub(1) nssa(2)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER transit(0), stub(1), nssa(2)  

ospfNewCfgAreaMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.6
Metric (1-65535)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

ospfNewCfgAreaStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.7
Status disabled(0) enabled(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

ospfNewCfgAreaDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.3.1.8
Delete the area no(0), yes(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

ospfCurCfgHostTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.12
The table of OSPF Host configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfCurCfgHostEntry

ospfCurCfgHostEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.12.1
Information about a OSPF host.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfCurCfgHostEntry  

ospfCurCfgHostIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.12.1.1
The OSPF host number for which the OSPF host table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfCurCfgHostIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.12.1.2
The IP Address of the OSPF host.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfCurCfgHostAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.12.1.3
The area index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfCurCfgHostCost 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.12.1.4
The cost of the OSPF host.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ospfCurCfgHostState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.12.1.5
Enable or disable an OSPF Host
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ospfNewCfgHostTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13
The table of OSPF Host configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfNewCfgHostEntry

ospfNewCfgHostEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13.1
Information about a OSPF host.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfNewCfgHostEntry  

ospfNewCfgHostIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13.1.1
The OSPF host number for which the OSPF host table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfNewCfgHostIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13.1.2
The IP Address of the OSPF host.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ospfNewCfgHostAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13.1.3
The OSPF area index.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

ospfNewCfgHostCost 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13.1.4
The cost of the OSPF host.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

ospfNewCfgHostState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13.1.5
Enable or disable an OSPF Host
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ospfNewCfgHostDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.13.1.6
Delete the OSPF host: no(0), yes(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

ospfMdkeyTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.11
The maximum number of rows in the OSPF Mdkey table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfCurCfgMdkeyTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.5
The table of OSPF MD5 keys in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfCurCfgMdkeyEntry

ospfCurCfgMdkeyEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.5.1
Information about an OSPF MD keys table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfCurCfgMdkeyEntry  

ospfCurCfgMdkeyIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.5.1.1
The OSPF MD5 Key number for which the OSPF MdKey table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfCurCfgMdkeyKey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.5.1.2
The character string representing the MD5 Key.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

ospfNewCfgMdkeyTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.6
The table of OSPF MD5 keys in the new_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfNewCfgMdkeyEntry

ospfNewCfgMdkeyEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.6.1
Information about an OSPF MD keys table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfNewCfgMdkeyEntry  

ospfNewCfgMdkeyIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.6.1.1
The OSPF MD5 Key number for which the OSPF MdKey table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfNewCfgMdkeyKey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.6.1.2
The character string representing the MD5 Key.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..16)  

ospfNewCfgMdkeyDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.6.1.3
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ospfCurCfgIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7
The table of OSPF Interface configuration in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfCurCfgIntfEntry

ospfCurCfgIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1
Information about an OSPF Interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfCurCfgIntfEntry  

ospfCurCfgIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.1
The OSPF Interface number for which the OSPF Interface table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfCurCfgIntfId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.2
The IP Address of the OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfCurCfgIntfArea 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.3
The index of the area that the interface belongs
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

ospfCurCfgIntfMdkey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.4
The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

ospfCurCfgIntfCost 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.5
Interface cost
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ospfCurCfgIntfPrio 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.6
Interface router priority
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

ospfCurCfgIntfHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.7
Hello interval
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ospfCurCfgIntfDead 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.8
Dead interval
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ospfCurCfgIntfTrans 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.9
Transit delay
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3600  

ospfCurCfgIntfRetra 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.10
Retransmit interval
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3600  

ospfCurCfgIntfAuthKey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.11
Authentication Key
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

ospfCurCfgIntfStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.7.1.12
Status of the interface disabled(0), enabled(1)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

ospfNewCfgIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8
The table of OSPF Interface configuration in the new_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfNewCfgIntfEntry

ospfNewCfgIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1
Information about an OSPF Interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfNewCfgIntfEntry  

ospfNewCfgIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.1
The OSPF Interface number for which the OSPF Interface table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfNewCfgIntfId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.2
The IP Address of the OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfNewCfgIntfArea 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.3
The index of the area that the interface belongs (0..2)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..2  

ospfNewCfgIntfMdkey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.4
The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

ospfNewCfgIntfCost 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.5
Interface cost(1..65535)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

ospfNewCfgIntfPrio 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.6
Interface router priority(0..255)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

ospfNewCfgIntfHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.7
Hello interval(1..65535)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

ospfNewCfgIntfDead 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.8
Dead interval(1..65535)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

ospfNewCfgIntfTrans 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.9
Transit delay(1..3600)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..3600  

ospfNewCfgIntfRetra 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.10
Retransmit interval(1..3600)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..3600  

ospfNewCfgIntfAuthKey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.11
Authentication Key
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..8)  

ospfNewCfgIntfStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.12
Status of the interface disabled(0), enabled(1)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

ospfNewCfgIntfDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.8.1.13
Delete the interface other(0), delete(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(0), delete(1)  

ospfCurCfgVirtIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9
The table of OSPF Virtual Interface configuration in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfCurCfgVirtIntfEntry

ospfCurCfgVirtIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1
Information about an OSPF virtual Interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfCurCfgVirtIntfEntry  

ospfCurCfgVirtIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.1
The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfCurCfgVirtIntfAreaId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.2
The index of the OSPF area to which this virtual interface belongs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

ospfCurCfgVirtIntfNbr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.3
The IP Address of the OSPF neighbor for this virtual interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfCurCfgVirtIntfMdkey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.4
The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

ospfCurCfgVirtIntfHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.5
Hello interval
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ospfCurCfgVirtIntfDead 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.6
Dead interval
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ospfCurCfgVirtIntfTrans 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.7
Transit delay
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3600  

ospfCurCfgVirtIntfRetra 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.8
Retransmit interval
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3600  

ospfCurCfgVirtIntfAuthKey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.9
Authentication Key
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

ospfCurCfgVirtIntfStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.9.1.10
Status disabled(0), enabled(1)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

ospfNewCfgVirtIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10
The table of OSPF Virtual Interface configuration in the new_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfNewCfgVirtIntfEntry

ospfNewCfgVirtIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1
Information about an OSPF virtual Interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfNewCfgVirtIntfEntry  

ospfNewCfgVirtIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.1
The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfNewCfgVirtIntfAreaId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.2
The index of the OSPF area to which this virtual interface belongs.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..2  

ospfNewCfgVirtIntfNbr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.3
The IP Address of the OSPF neighbor for this virtual interface.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ospfNewCfgVirtIntfMdkey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.4
The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

ospfNewCfgVirtIntfHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.5
Hello interval(1..65535)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

ospfNewCfgVirtIntfDead 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.6
Dead interval(1..65535)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..65535  

ospfNewCfgVirtIntfTrans 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.7
Transit dela(1..3600)y
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..3600  

ospfNewCfgVirtIntfRetra 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.8
Retransmit interval(1..3600)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..3600  

ospfNewCfgVirtIntfAuthKey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.9
Authentication Key SIZE(0..8)
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..8)  

ospfNewCfgVirtIntfStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.10
Status disabled(0), enabled(1)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

ospfNewCfgVirtIntfDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.10.1.11
Delete other(0), delete(1)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(0), delete(1)  

ospfCurCfgRangeTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14
The table of OSPF summary range in the current configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfCurCfgRangeEntry

ospfCurCfgRangeEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14.1
Information about an OSPF summary range.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfCurCfgRangeEntry  

ospfCurCfgRangeIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14.1.1
The range number for which the OSPF summary range table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfCurCfgRangeAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14.1.2
The IP Address of the range.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfCurCfgRangeMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14.1.3
The mask of the range.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfCurCfgRangeAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14.1.4
The area index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfCurCfgRangeHideState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14.1.5
The state of the hide range.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ospfCurCfgRangeState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.14.1.6
The state of the range.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ospfNewCfgRangeTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15
The table of OSPF summary range in the new configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfNewCfgRangeEntry

ospfNewCfgRangeEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1
Information about an OSPF summary range.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfNewCfgRangeEntry  

ospfNewCfgRangeIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1.1
The range number for which the OSPF summary range table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfNewCfgRangeAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1.2
The IP Address of the range.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ospfNewCfgRangeMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1.3
The mask of the range.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

ospfNewCfgRangeAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1.4
The area index.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

ospfNewCfgRangeHideState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1.5
The state of the hide range.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ospfNewCfgRangeState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1.6
The state of the range.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ospfNewCfgRangeDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.15.1.7
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

ospfRouteRedistribution 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4
OBJECT IDENTIFIER    

ospfRedistributeStatic 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1
OBJECT IDENTIFIER    

ospfCurCfgStaticMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.1
The metric to be assigned to static routes. A value of 0 indicates none.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

ospfNewCfgStaticMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.2
The metric to be assigned to static routes. A value of 0 indicates none.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

ospfCurCfgStaticMetricType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.3
The AS External metric type for static routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ospfNewCfgStaticMetricType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.4
The AS External metric type for static routes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ospfCurCfgStaticOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.5
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ospfNewCfgStaticOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.6
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ospfNewCfgStaticAddOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.7
The route map to be add into out-rmap list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ospfNewCfgStaticRemoveOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.1.8
The route map to be removed from out-rmap list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ospfRedistributeFixed 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4
OBJECT IDENTIFIER    

ospfCurCfgFixedMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.1
The export metric for fixed routes. A value of 0 indicates none
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

ospfNewCfgFixedMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.2
The export metric for fixed routes. A value of 0 indicates none
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

ospfCurCfgFixedMetricType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.3
The AS External metric type for fixed routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ospfNewCfgFixedMetricType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.4
The AS External metric type for fixed routes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ospfCurCfgFixedOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.5
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ospfNewCfgFixedOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.6
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ospfNewCfgFixedAddOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.7
The route map to be add into out-rmap list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ospfNewCfgFixedRemoveOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.4.8
The route map to be removed from out-rmap list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ospfRedistributeRip 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5
OBJECT IDENTIFIER    

ospfCurCfgRipMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.1
The export metric for RIP routes. A value of 0 indicates none
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

ospfNewCfgRipMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.2
The export metric for RIP routes. A value of 0 indicates none
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..16777215  

ospfCurCfgRipMetricType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.3
The AS External metric type for RIP routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ospfNewCfgRipMetricType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.4
The AS External metric type for RIP routes.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ospfCurCfgRipOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.5
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ospfNewCfgRipOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.6
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ospfNewCfgRipAddOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.7
The route map to be add into out-rmap list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ospfNewCfgRipRemoveOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.8
The route map to be removed from out-rmap list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ipCurCfgRouterID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.14.1
The router ID of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipNewCfgRouterID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.14.2
The router ID of the switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

igmpCurCfgOnOff 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.1
Globally turn IGMP On/Off.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

igmpNewCfgOnOff 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.2
Globally turn IGMP On/Off.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

igmpSnoopCfgGen 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3
OBJECT IDENTIFIER    

igmpStaticMrtrCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4
OBJECT IDENTIFIER    

igmpFilterCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5
OBJECT IDENTIFIER    

igmpSnoopCfg 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1
OBJECT IDENTIFIER    

igmpSnoopCurCfgTimeout 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.1
Set IGMP Report timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpSnoopNewCfgTimeout 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.2
Set IGMP Report timeout.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

igmpSnoopCurCfgMrto 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.3
The value of multicast router timeout in the current config.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpSnoopNewCfgMrto 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.4
The value of multicast router timeout in the new config.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

igmpSnoopNewCfgVlanFastlvAdd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.12
The VLAN to be added to fastleave vlan list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

igmpSnoopNewCfgVlanFastlvRem 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.13
The VLAN to be removed from fastleave vlan list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

igmpSnoopCurCfgVlanFastlvBmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.14
The fastlv enabled vlans present in the in vlan map list. The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has fastlv enabled 0 - The represented vlan does not have fastlv enabled.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

igmpSnoopNewCfgVlanFastlvBmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.15
The fastlv enabled vlans present in the in vlan map list. The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has fastlv enabled 0 - The represented vlan does not have fastlv enabled.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

igmpSnoopCurCfgRobust 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.16
The value of expected packet loss on subnet in the current config.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpSnoopNewCfgRobust 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.17
The value of expected packet loss on subnet in the new config.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

igmpSnoopNewCfgVlanAdd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.18
The VLAN to be added to snooping vlan list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

igmpSnoopNewCfgVlanRem 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.19
The VLAN to be removed from snooping vlan list. When read, 0 is returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

igmpSnoopNewCfgVlanClear 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.20
Removing ALL Snooping Vlans.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), ok(2)  

igmpSnoopCurCfgVlanBmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.21
The snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

igmpSnoopNewCfgVlanBmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.22
The snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

igmpSnoopCurCfgQInterval 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.23
IGMP Query Interval of current config.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpSnoopNewCfgQInterval 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.24
IGMP Query Interval of new config.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

igmpSnoopCurCfgSrcIp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.25
The source ip for GSQ proxy in current config.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

igmpSnoopNewCfgSrcIp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.26
The source ip for GSQ proxy in new config.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

igmpSnoopCurCfgAggrEnaDis 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.27
Enable/Disable of IGMP Report aggregation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

igmpSnoopNewCfgAggrEnaDis 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.28
Enable/Disable of IGMP Report aggregation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

igmpStaticMrtrCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.1
The IGMP Static Multicast Router table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpStaticMrtrCurCfgTableEntry

igmpStaticMrtrCurCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.1.1
A row in the Static Multicast Router table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IgmpStaticMrtrCurCfgTableEntry  

igmpStaticMrtrCurCfgIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.1.1.1
The IGMP Multicast Router table port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpStaticMrtrCurCfgPortId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.1.1.2
The IGMP Multicast Router port in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpStaticMrtrCurCfgVlanId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.1.1.3
The IGMP Multicast Router port in the current configuration block.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpStaticMrtrCurCfgVersion 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.1.1.4
The IGMP version of the IGMP Static Multicast Router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER version1(1), version2(2)  

igmpStaticMrtrNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.2
The IGMP Static Multicast Router table in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpStaticMrtrNewCfgTableEntry

igmpStaticMrtrNewCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.2.1
A row in the Static Multicast Router table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IgmpStaticMrtrNewCfgTableEntry  

igmpStaticMrtrNewCfgIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.2.1.1
The IGMP Multicast Router table port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpStaticMrtrNewCfgPortId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.2.1.2
The IGMP Multicast Router port in the new configuration block.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

igmpStaticMrtrNewCfgVlanId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.2.1.3
The IGMP Multicast Router port in the new configuration block.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

igmpStaticMrtrNewCfgVersion 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.2.1.4
The IGMP version of the IGMP Static Multicast Router.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER version1(1), version2(2)  

igmpStaticMrtrNewCfgDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.4.2.1.5
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

igmpFltCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.1
The IGMP filtering table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpFltCurCfgTableEntry

igmpFltCurCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.1.1
A row in the filtering table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IgmpFltCurCfgTableEntry  

igmpFltCurCfgIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.1.1.1
The IGMP filter table index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpFltCurCfgMcastIp1 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.1.1.2
Range1 Multicast IP address to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

igmpFltCurCfgMcastIp2 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.1.1.3
Range2 Multicast IP address to be filtered.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

igmpFltCurCfgAction 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.1.1.4
The action for the IGMP filtering rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER allow(1), deny(2)  

igmpFltCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.1.1.5
The state of this IGMP filtering rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

igmpFltNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2
The IGMP filtering table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpFltNewCfgTableEntry

igmpFltNewCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2.1
A row in the filtering table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IgmpFltNewCfgTableEntry  

igmpFltNewCfgIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2.1.1
The IGMP filter table index.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

igmpFltNewCfgMcastIp1 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2.1.2
Range1 Multicast source IP address to be filtered.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

igmpFltNewCfgMcastIp2 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2.1.3
Range2 Multicast source IP address to be filtered.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

igmpFltNewCfgAction 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2.1.4
The action for the IGMP filtering rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER allow(1), deny(2)  

igmpFltNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2.1.5
The state of this IGMP filtering rule.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

igmpFltNewCfgDelete 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.2.1.6
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

igmpFltCurCfgPortTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.3
The IGMP filtering port table in the current configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpFltCurCfgPortTableEntry

igmpFltCurCfgPortTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.3.1
A row in the IGMP filtering port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IgmpFltCurCfgPortTableEntry  

igmpFltCurCfgPortIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.3.1.1
The port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpFltCurCfgPortState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.3.1.2
Enable or disable IGMP filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

igmpFltCurCfgPortFiltBmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.3.1.3
The IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to igmpFltCurCfgTable) where x : 1 - The represented IGMP filter rule applied to the port 0 - The represented IGMP filter rule not applied to the port
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

igmpFltNewCfgPortTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.4
The IGMP filtering port table in the new configuration block.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpFltNewCfgPortTableEntry

igmpFltNewCfgPortTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.4.1
A row in the IGMP filtering port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IgmpFltNewCfgPortTableEntry  

igmpFltNewCfgPortIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.4.1.1
The port index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpFltNewCfgPortState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.4.1.2
Enable or disable IGMP filtering.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

igmpFltNewCfgPortFiltBmap 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.4.1.3
The IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltNewCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

igmpFltNewCfgPortAddFiltRule 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.4.1.4
This is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be added to the port. The range of the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the value '0' is returned always.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

igmpFltNewCfgPortRemFiltRule 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.4.1.5
This is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be removed from the port. The range of the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the value '0' is returned always.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

igmpFltCurCfgEnaDis 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.5
Enable/Disable of IGMP Filtering.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

igmpFltNewCfgEnaDis 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.5.6
Enable/Disable of IGMP Filtering.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ripStatInPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.1.1
The total number of good RIP packets recieved.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatOutPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.1.2
The total number of RIP packets transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatInErrorPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.1.3
The total number of error RIP packets recieved.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatRoutesAgedOut 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.1.4
The total number of RIP routes which have aged out.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatInPackets 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.1
The total number of RIP packets recieved.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatOutPackets 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.2
The total number of RIP packets transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatInRequestPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.3
The total number of RIP requests recieved.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatInResponsePkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.4
The total number of RIP response recieved.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatOutRequestPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.5
The total number of RIP requests transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatOutResponsePkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.6
The total number of RIP responses transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatRouteTimeout 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.7
The total number of RIP route timeouts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatInBadSizePkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.8
The total number of bad size RIP packets recieved.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatInBadVersion 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.9
The total number of RIP bad versions recieved.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatInBadZeros 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.10
The total number of RIP bad zeros recieved.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatInBadSourcePort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.11
The total number of RIP bad source port recieved.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatInBadSourceIP 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.12
The total number of RIP bad source IP recieved.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripStatInSelfRcvPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.13.13
The total number of RIP packets from self received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dnsStatInGoodDnsRequests 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.14.1
The total number of good DNS request packets received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dnsStatOutDnsRequests 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.14.2
The total number of DNS request packets
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dnsStatInBadDnsRequests 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.14.3
The total number of bad DNS request packets received
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

maxL3TableSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.15.1
Max L3 table size
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

noL3EntriesUsed 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.15.2
Number of L3 entries used
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

maxLpmTableSize 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.15.3
Max LPM table size
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

noLpmEntriesUsed 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.15.4
Number of LPM entries used
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

maxBlockInLpmTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.15.5
Max number of blocks in LPM table
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

noBlocksUsedInLpmTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.15.6
Number of blocks used in LPM table
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arpStatEntries 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.2.1
The current number of ARP entries.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

arpStatHighWater 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.2.2
The highest number of ARP entries.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

arpStatMaxEntries 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.2.3
The maximum number of ARP entries.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

routeStatEntries 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.3.1
The current number of IP routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

routeStatHighWater 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.3.2
The highest number of IP routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

routeStatMaxEntries 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.3.3
The maximum number of IP routes.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

vrrpStatInAdvers 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.1
The number of good VRRP advertisements which are received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vrrpStatOutAdvers 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.2
The number of good VRRP advertisements which are transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vrrpStatOutBadAdvers 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.3
The number of bad VRRP advertisements which are received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vrrpStatBadVersion 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.4
The number of bad VRRP version adv which are received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vrrpStatBadAddress 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.5
The number of bad VRRP addres adv which are received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vrrpStatBadPassword 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.6
The number of bad VRRP advertisements which are received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vrrpStatBadVrid 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.7
The number of bad VRRP version ID adv which are received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vrrpStatBadData 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.8
The number of bad VRRP advertisements which are received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vrrpStatBadInterval 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.4.9
The number of bad VRRP iutervals which are received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ipClearStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.6.1
Setting this to clear(1) results in clearing the IP statistics.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), ok(2)  

ifStatsTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.6.2
The table of Interface Statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IfStatsEntry

ifStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.6.2.1
IP Interface statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  IfStatsEntry  

ifStatsIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.6.2.1.1
The index of the IP interface for which these statistics apply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ifClearStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.6.2.1.2
Setting this to clear(1) results in clearing the statistics for this IP interface (if) stats.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), ok(2)  

igmpClearAllStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.2
Setting this to clear(1) results in clearing the IGMP statistics.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), ok(2)  

ospfGeneralStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1
OBJECT IDENTIFIER    

ospfCumRxTxStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1
OBJECT IDENTIFIER    

ospfCumNbrChangeStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2
OBJECT IDENTIFIER    

ospfCumIntfChangeStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3
OBJECT IDENTIFIER    

ospfTimersKickOffStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4
OBJECT IDENTIFIER    

ospfArea 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2
OBJECT IDENTIFIER    

ospfAreaRxTxStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1
The table of OSPF Area Rx/Tx Statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfAreaRxTxStatsEntry

ospfAreaRxTxStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1
Rx Tx packet Statistics about a OSPF area.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfAreaRxTxStatsEntry  

ospfAreaRxTxIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.1
The index of the ospf Area for which these statistics apply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfAreaRxPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.2
The total number of OSPF packets received in this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaTxPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.3
The total number of OSPF packets transmitted in this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaRxHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.4
The total number of Hello packets received in this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaTxHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.5
The total number of Hello packets transmitted in this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaRxDatabase 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.6
The total number of Database Description packets transmitted for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaTxDatabase 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.7
The total number of Database Description packets transmitted for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaRxlsReqs 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.8
The total number of Link State Request packets received for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaTxlsReqs 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.9
The total number of Link State Request packets transmitted for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaRxlsAcks 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.10
The total number of Link State Acknowledgement packets received for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaTxlsAcks 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.11
The total number of Link State Acknowledgement packets transmitted for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaRxlsUpdates 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.12
The total number of Link State Update packets received for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaTxlsUpdates 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.1.1.13
The total number of Link State Update packets transmitted for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaNbrChangeStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2
The table of OSPF Area Neighbour Statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfAreaNbrChangeStatsEntry

ospfAreaNbrChangeStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1
Area Neighbour Change Statistics about a OSPF area.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfAreaNbrChangeStatsEntry  

ospfAreaNbrIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.1
The index of the ospf Area for which these statistics apply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfAreaNbrhello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.2
The total number of Hello packets received from neighbours in this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaNbrStart 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.3
The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaNbrAdjointOk 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.4
The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaNbrNegotiationDone 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.5
The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaNbrExchangeDone 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.6
The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaNbrBadRequests 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.7
The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaNbrBadSequence 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.8
The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaNbrLoadingDone 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.9
The total number of link state updates received for all out-of-date portions of the database in this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaNbrN1way 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.10
The total number of Hello packets received from neighbours, in which this router is not mentioned in this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaNbrRstAd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.11
The total number of times the Neighbour adjacency has been reset across this OPSF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaNbrDown 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.12
The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) in this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaNbrN2way 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.2.1.13
The total number of Hello packets received from neighbours, in which this router is mentioned in this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaChangeStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3
The table of OSPF Area Change Statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfAreaChangeStatsEntry

ospfAreaChangeStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1
Area Change Statistics about a OSPF area.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfAreaChangeStatsEntry  

ospfAreaIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.1
The index of the OSPF Area for which these statistics apply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfAreaIntfHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.2
The total number of Hello packets sent on this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaIntfDown 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.3
The total number of interfaces down in this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaIntfLoop 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.4
The total number of interfaces no longer connected to the attatched network in this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaIntfUnloop 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.5
The total number of interfaces connected to the attatched network in this OSPF area..
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaIntfWaitTimer 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.6
The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaIntfBackup 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.7
The total number of Backup Designated Routers on the attatched network for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaIntfNbrChange 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.3.1.8
The total number of changes in the set of bidirectional neighbours associated with the interface in this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaErrorStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4
The table of OSPF Area Error Statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfAreaErrorStatsEntry

ospfAreaErrorStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1
Error Statistics for an OSPF area.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfAreaErrorStatsEntry  

ospfAreaErrIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1.1
The index of the OSPF Area for which these statistics apply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfAreaErrAuthFailure 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1.2
The total number of packets received with a wrong password in this area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaErrNetmaskMismatch 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1.3
The total number of packets received with a wrong netmask in this area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaErrHelloMismatch 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1.4
The total number of packets received with a different hello interval in this area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaErrDeadMismatch 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1.5
The total number of packets received with a different dead interval in this area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaErrOptionsMismatch 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1.6
The total number of packets received with a different options in this area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfAreaErrUnknownNbr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.2.4.1.7
The total number of packets received from an unknown neighbor in this area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfInterface 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3
OBJECT IDENTIFIER    

ospfIntfRxTxStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1
The table of OSPF Interface Rx/Tx packet Statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfIntfRxTxStatsEntry

ospfIntfRxTxStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1
OSPF interface Rx/Tx packet statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfIntfRxTxStatsEntry  

ospfIntfRxTxIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.1
The OSPF interface for which these statistics apply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfIntfRxPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.2
The total number of OSPF packets received for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfTxPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.3
The total number of OSPF packets transmitted for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfRxHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.4
The total number of Hello packets received for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfTxHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.5
The total number of Hello packets transmitted for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfRxDatabase 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.6
The total number of Database Description packets received for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfTxDatabase 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.7
The total number of Database Description packets transmitted for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfRxlsReqs 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.8
The total number of Link State Request packets received for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfTxlsReqs 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.9
The total number of Link State Request packets transmitted for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfRxlsAcks 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.10
The total number of Link State Acknowledgement packets received for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfTxlsAcks 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.11
The total number of Link State Acknowledgement packets transmitted for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfRxlsUpdates 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.12
The total number of Link State Update packets received for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfTxlsUpdates 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.1.1.13
The total number of Link State Update packets transmitted for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfNbrChangeStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2
The table of OSPF Interface Neighbour change Statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfIntfNbrChangeStatsEntry

ospfIntfNbrChangeStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1
OSPF interface Neighbour Change statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfIntfNbrChangeStatsEntry  

ospfIntfNbrIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.1
The index of the OSPF Interface for which these statistics apply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfIntfNbrhello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.2
The total number of Hello packets received from neighbours in this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfNbrStart 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.3
The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfNbrAdjointOk 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.4
The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfNbrNegotiationDone 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.5
The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfNbrExchangeDone 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.6
The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfNbrBadRequests 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.7
The total number of Link State Requests which have been received for a link state advertisement not contained in the database for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfNbrBadSequence 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.8
The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfNbrLoadingDone 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.9
The total number of link state updates received for all out-of-date portions of the database for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfNbrN1way 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.10
The total number of Hello packets received from neighbours, in which this router is not mentioned for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfNbrRstAd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.11
The sum total number of times the Neighbour adjacency has been reset on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfNbrDown 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.12
The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfNbrN2way 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.2.1.13
The total number of Hello packets received from neighbours, in which this router is mentioned for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfChangeStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3
The table of OSPF Interface change Statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfIntfChangeStatsEntry

ospfIntfChangeStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1
OSPF interface Change statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfIntfChangeStatsEntry  

ospfIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.1
The index of the OSPF Interface for which these statistics apply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfIntfHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.2
The total number of Hello packets sent by this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfDown 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.3
The total number of times the interface was down.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfLoop 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.4
The total number of times the interface was no longer connected to the attatched network.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfUnloop 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.5
The total number of times the interface, connected back to the attatched network.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfWaitTimer 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.6
The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfBackup 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.7
The total number of Backup Designated Routers on the attatched network for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfNbrChange 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.3.1.8
The total number of changes in the set of bidirectional neighbours associated with the interface for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfErrorStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4
The table of OSPF Interface Error Statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfIntfErrorStatsEntry

ospfIntfErrorStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1
Error Statistics for an OSPF area.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfIntfErrorStatsEntry  

ospfIntfErrIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1.1
The index of the OSPF Intf for which these statistics apply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfIntfErrAuthFailure 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1.2
The total number of packets received with a wrong password in this area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfErrNetmaskMismatch 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1.3
The total number of packets received with a wrong netmask in this area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfErrHelloMismatch 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1.4
The total number of packets received with a different hello interval in this area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfErrDeadMismatch 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1.5
The total number of packets received with a different dead interval in this area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfErrOptionsMismatch 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1.6
The total number of packets received with a different options in this area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfIntfErrUnknownNbr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.3.4.1.7
The total number of packets received from an unknown neighbor in this area.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumRxPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.1
The sum total of all OSPF packets received on all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumTxPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.2
The sum total of all OSPF packets transmitted on all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumRxHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.3
The sum total of all Hello packets received on all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumTxHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.4
The sum total of all Hello packets transmitted on all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumRxDatabase 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.5
The sum total of all Database Description packets received on all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumTxDatabase 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.6
The sum total of all Database Description packets transmitted on all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumRxlsReqs 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.7
The sum total of all Link State Request packets received on all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumTxlsReqs 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.8
The sum total of all Link State Request packets transmitted on all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumRxlsAcks 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.9
The sum total of all Link State Acknowledgement packets received on all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumTxlsAcks 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.10
The sum total of all Link State Acknowledgement packets transmitted on all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumRxlsUpdates 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.11
The sum total of all Link State Update packets received on all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumTxlsUpdates 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.1.12
The sum total of all Link State Update packets transmitted on all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumNbrhello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.1
The sum total of all Hello packets received from neighbours on all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumNbrStart 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.2
The sum total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) across all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumNbrAdjointOk 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.3
The sum total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour across all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumNbrNegotiationDone 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.4
The sum total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, across all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumNbrExchangeDone 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.5
The sum total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, across all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumNbrBadRequests 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.6
The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across all interfaces and OSPF areas.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumNbrBadSequence 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.7
The sum total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumNbrLoadingDone 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.8
The sum total number of link state updates received for all out-of-date portions of the database across all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumNbrN1way 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.9
The sum total number of Hello packets received from neighbours, in which this router is not mentioned across all OSPF interfaces and areas.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumNbrRstAd 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.10
The sum total number of times the Neighbour adjacency has been reset across all OPSF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumNbrDown 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.11
The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) across all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumNbrN2way 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.2.12
The sum total number of Hello packets received from neighbours, in which this router is mentioned across all OSPF interfaces and areas.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumIntfHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3.1
The sum total number of Hello packets sent on all interfaces and areas
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumIntfDown 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3.2
The sum total number of interfaces down in all OSPF areas.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumIntfLoop 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3.3
The sum total of interfaces no longer connected to the attatched network across all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumIntfUnloop 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3.4
The sum total number of interfaces, connected to the attatched network in all OSPF areas.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumIntfWaitTimer 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3.5
The sum total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) across all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumIntfBackup 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3.6
The sum total number of Backup Designated Routers on the attatched network for all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfCumIntfNbrChange 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.3.7
The sum total number of changes in the set of bidirectional neighbours associated with any interface across all OSPF areas.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfTmrsKckOffHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4.1
The sum total number of times the Hello timer has been fired (which triggers the send of a Hello packet) across all OPSF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfTmrsKckOffRetransmit 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4.2
The sum total number of times the Retransmit timer has been fired across all OPSF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfTmrsKckOffLsaLock 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4.3
The sum total number of times the Lsa Lock timer has been fired across all OSPF areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfTmrsKckOffLsaAck 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4.4
The sum total number of times the Lsa Ack timer has been fired across all ospf areas and interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfTmrsKckOffDbage 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4.5
The total number of times the Dbage has been fired.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfTmrsKckOffSummary 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4.6
The total number of times the Summary timer has been fired.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfTmrsKckOffAseExport 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.5.1.4.7
The total number of times the ASE Export timer has been fired.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

igmpSnoopStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1
The table of OSPF Interface Error Statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpSnoopStatsEntry

igmpSnoopStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1
Statistics for IGMP Snooping.
Status: current Access: not-accessible
OBJECT-TYPE    
  IgmpSnoopStatsEntry  

igmpSnoopVlanIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.1
The index of the VLAN for which these statistics apply.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rxIgmpValidPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.2
The total number of valid IGMP packets received on this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxIgmpInvalidPkts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.3
The total number of invalid IGMP packets received on this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxIgmpGenQueries 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.4
The total number of IGMP General Query packets received on this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxIgmpGrpSpecificQueries 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.5
The total number of IGMP Group Specific Query packets received on this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxIgmpLeaves 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.6
The total number of IGMP Leave packets received on this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rxIgmpReports 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.7
The total number of IGMP Report packets received on this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txIgmpGrpSpecificQueries 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.8
The total number of IGMP Group Specific Query packets transmitted on this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txIgmpReports 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.9
The total number of IGMP Report packets transmitted on this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

txIgmpLeaves 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.10
The total number of IGMP Leave packets transmitted on this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

igmpClearVlanStats 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.2.7.1.1.11
Setting this to clear(1) results in clearing the statistics for this snooping VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), ok(2)  

ipRouteInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1
The table of run-time IP routes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpRouteInfoEntry

ipRouteInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1
A row in the run-time IP route table
Status: current Access: not-accessible
OBJECT-TYPE    
  IpRouteInfoEntry  

ipRouteInfoIndx 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.1
The index of this route table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipRouteInfoDestIp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.2
The destination IP address of this route.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipRouteInfoMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.3
The destination IP mask of this route.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipRouteInfoGateway 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.4
The next-hop router address for this route.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipRouteInfoTag 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.5
The tag-type for this route.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fixed(1), static(2), addr(3), rip(4), broadcast(5), martian(6), multicast(7), vip(8), bgp(9), ospf(10), none(11)  

ipRouteInfoType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.6
The type of the route.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER indirect(1), direct(2), local(3), broadcast(4), martian(5), multicast(6), other(7)  

ipRouteInfoInterface 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.7
The interface number for which the destination address is applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipRouteInfoMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.1.1.8
The metric of this route.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

routeTableClear 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.1.2
Setting this value to clear(2) clears the route table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), clear(2)  

arpInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1
The table of ARP entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgArpInfoEntry

arpInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1.1
A row in the ARP table
Status: current Access: not-accessible
OBJECT-TYPE    
  AgArpInfoEntry  

arpInfoDestIp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1.1.1
The destination IP address of the ARP entry.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

arpInfoMacAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1.1.2
The MAC address for the ARP entry.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

arpInfoVLAN 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1.1.3
The VLAN identifier for the ARP entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arpInfoSrcPort 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1.1.4
The port number on which this entry's equivalence is effective.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arpInfoRefPorts 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1.1.5
The rference ports associated with this ARP entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

arpInfoFlag 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.1.1.6
The flag associated with this ARP entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER clear(1), unresolved(2), permanent(3), indirect(4)  

arpCacheClear 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.2.2
Setting this value to clear(2) clears the ARP cache.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), clear(2)  

igmpInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1
The table of IGMP group membership information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpInfoEntry

igmpInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1.1
Information about an IGMP group member .
Status: current Access: not-accessible
OBJECT-TYPE    
  IgmpInfoEntry  

igmpInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1.1.1
The igmp group number for which the IGMP info table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpInfoGroupId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1.1.2
The IP address of the IGMP group.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

igmpInfoVlanId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1.1.3
The VLAN ID for this IGMP group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpInfoVersion 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1.1.5
The Version of IGMP host.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER v3(1), v2(2), v1(3)  

igmpInfoPortNum 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1.1.6
The Version of IGMP host.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpInfoExpires 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.1.1.7
The expiration time for this host.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

igmpMrtrInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2
The table of IGMP mrouters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpMrtrInfoEntry

igmpMrtrInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2.1
Information about an IGMP mrouter.
Status: current Access: not-accessible
OBJECT-TYPE    
  IgmpMrtrInfoEntry  

igmpMrtrInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2.1.1
The mrouter number for which the IGMP mrouter info table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpMrtrInfoVlanId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2.1.2
The VLAN ID on which this IGMP mrouter is attached.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpMrtrInfoPortId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2.1.3
The port on which this IGMP mrouter is attached.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpMrtrInfoVersion 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2.1.4
The version of this IGMP mrouter.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

igmpMrtrInfoExpires 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2.1.5
The expiration time for this mrouter.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

igmpMrtrInfoMrt 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.5.2.1.6
The Maximum Query Response time of this IGMP mrouter.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rip2GeneralInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.1
OBJECT IDENTIFIER    

ripInfoState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.1.1
RIP global state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

ripInfoUpdatePeriod 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.1.2
Update Period in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..120  

rip2InfoIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2
The information table of RIP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RipInfoIntfEntry

ripInfoIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1
Information about RIP on IP interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  RipInfoIntfEntry  

ripInfoIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.1
The interface number for which the RIP information is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ripInfoIntfVersion 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.2
RIP version.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ripVersion1(1), ripVersion2(2)  

ripInfoIntfAddress 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.3
The interface address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ripInfoIntfState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.4
The status of RIP protocol.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripInfoIntfListen 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.5
The status of listening to route updates.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripInfoIntfTrigUpdate 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.6
The status of triggered updates.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripInfoIntfMcastUpdate 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.7
The status of multicast updates.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripInfoIntfPoisonReverse 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.8
The status of RIP poison reverse.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripInfoIntfSupply 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.9
The status of supplying route updates.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ripInfoIntfMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.10
RIP route metric for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

ripInfoIntfAuth 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.11
The type of Authentication used on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), password(2)  

ripInfoIntfKey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.12
RIP update authentication password.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

ripInfoIntfDefault 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.7.2.1.13
Specifies what RIP does with default routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER both(1), listen(2), supply(3), none(4)  

ipInfoRouterID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.1
Router ID information.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipIntfInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2
The table of IP interface information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IntfInfoEntry

intfInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2.1
A row in IP interface information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IntfInfoEntry  

intfInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2.1.1
The interface number for which the information is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

intfInfoAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2.1.2
The IP address of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

intfInfoNetMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2.1.3
The subnet mask of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

intfInfoBcastAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2.1.4
The broadcast address of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

intfInfoVlan 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2.1.5
The VLAN number for this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

intfInfoStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.2.1.6
The status of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), disabled(3)  

gatewayInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.3
The table containing information for the default gateways.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GatewayInfoEntry

gatewayInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.3.1
A row in the gateway information table
Status: current Access: not-accessible
OBJECT-TYPE    
  GatewayInfoEntry  

gatewayInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.3.1.1
The gateway number for which the information is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gatewayInfoAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.3.1.2
The IP address of the default gateway.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

gatewayInfoStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.3.1.4
The status of the default gateway.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), failed(2)  

ipInfoBootpRelayState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.4
The state of BOOTP relay.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipInfoBootpRelayAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.5
The IP address of BOOTP server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipInfoBootpRelayAddr2 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.6
The IP address of second BOOTP server.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipInfoFwdState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.7
IP forwarding global state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

ipInfoFwdDirectedBcast 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.8
The state of forwarding directed broadcasts.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipInfoNwfTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.9
The table of IP network filter information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpInfoNwfEntry

ipInfoNwfEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.9.1
A row in the IP network filter information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpInfoNwfEntry  

ipInfoNwfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.9.1.1
The netowrk filter number for which the NWF is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipInfoNwfAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.9.1.2
The IP address of the network filter.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipInfoNwfMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.9.1.3
The subnet mask of the network filter.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipInfoNwfState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.9.1.4
The state of the network filter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipInfoRmapTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10
The table of IP route map information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpInfoRmapEntry

ipInfoRmapEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1
Information about an IP route map.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpInfoRmapEntry  

ipInfoRmapIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.1
The route map number for which the RMAP is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipInfoRmapLp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.2
The local-preference of the route map. 4294967295 means none
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

ipInfoRmapMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.3
The metric of the route map. 4294967295 means none
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

ipInfoRmapPrec 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.4
The precedence of the route map.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

ipInfoRmapWeight 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.5
The weight of the route map. 65535 means none
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

ipInfoRmapState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.6
Enable or disable the route map.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipInfoRmapAp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.7
The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is: [][ ]
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..18)  

ipInfoRmapMetricType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.10.1.8
The OSPF metric-type of the matched route.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ipOspfInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11
OBJECT IDENTIFIER    

ipOspfInfoState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.1
OSPF global state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

ipOspfInfoDefaultRouteMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.2
The metric to be assigned.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

ipOspfInfoDefaultRouteMetricType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.3
The AS External metric type to be assigned.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ipOspfInfoRouterID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.4
The router ID of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipOspfInfoLsdbLimit 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.5
The LSDB limit for external LSA.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2000  

ipOspfAreaInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6
The table of OSPF Area Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpOspfAreaInfoEntry

ipOspfAreaInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1
Information about a OSPF area.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpOspfAreaInfoEntry  

ipOspfAreaInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1.1
The OSPF area number for which the OSPF area table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipOspfAreaInfoId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1.2
The IP Address of the OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipOspfAreaInfoSpfInterval 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1.3
The SPF interval for the OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

ipOspfAreaInfoAuthType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1.4
Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), password(2), md5(3)  

ipOspfAreaInfoType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1.5
Type of Area. transit(0) stub(1) nssa(2)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER transit(0), stub(1), nssa(2)  

ipOspfAreaInfoMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1.6
Metric (1-65535)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ipOspfAreaInfoStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.6.1.7
Status disabled(0) enabled(1)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

ipOspfRangeInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7
The table of OSPF summary range information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpOspfRangeInfoEntry

ipOspfRangeInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7.1
Information about an OSPF summary range.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpOspfRangeInfoEntry  

ipOspfRangeInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7.1.1
The range number for which the OSPF summary range table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipOspfRangeInfoAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7.1.2
The IP Address of the range.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipOspfRangeInfoMask 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7.1.3
The mask of the range.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipOspfRangeInfoAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7.1.4
The area index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipOspfRangeInfoHideState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7.1.5
The state of the hide range.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipOspfRangeInfoState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.7.1.6
The state of the range.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipOspfIntfInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8
The table of OSPF Interface Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpOspfIntfInfoEntry

ipOspfIntfInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1
Information about an OSPF Interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpOspfIntfInfoEntry  

ipOspfIntfInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.1
The OSPF Interface number for which the OSPF Interface table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipOspfIntfInfoId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.2
The IP Address of the OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipOspfIntfInfoArea 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.3
The index of the area that the interface belongs
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

ipOspfIntfInfoMdkey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.4
The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

ipOspfIntfInfoCost 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.5
Interface cost
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ipOspfIntfInfoPrio 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.6
Interface router priority
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

ipOspfIntfInfoHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.7
Hello interval
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ipOspfIntfInfoDead 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.8
Dead interval
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ipOspfIntfInfoTrans 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.9
Transit delay
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3600  

ipOspfIntfInfoRetra 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.10
Retransmit interval
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3600  

ipOspfIntfInfoAuthKey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.11
Authentication Key
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

ipOspfIntfInfoStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.8.1.12
Status of the interface disabled(0), enabled(1)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

ipOspfVirtIntfInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9
The table of OSPF Virtual Interface Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpOspfVirtIntfInfoEntry

ipOspfVirtIntfInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1
Information about an OSPF virtual Interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpOspfVirtIntfInfoEntry  

ipOspfVirtIntfInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.1
The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipOspfVirtIntfInfoAreaId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.2
The index of the OSPF area to which this virtual interface belongs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

ipOspfVirtIntfInfoNbr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.3
The IP Address of the OSPF neighbor for this virtual interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipOspfVirtIntfInfoMdkey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.4
The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

ipOspfVirtIntfInfoHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.5
Hello interval
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ipOspfVirtIntfInfoDead 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.6
Dead interval
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ipOspfVirtIntfInfoTrans 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.7
Transit delay
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3600  

ipOspfVirtIntfInfoRetra 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.8
Retransmit interval
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3600  

ipOspfVirtIntfInfoAuthKey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.9
Authentication Key
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..8)  

ipOspfVirtIntfInfoStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.9.1.10
Status disabled(0), enabled(1)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

ipOspfHostInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.10
The table of OSPF Host Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpOspfHostInfoEntry

ipOspfHostInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.10.1
Information about a OSPF host.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpOspfHostInfoEntry  

ipOspfHostInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.10.1.1
The OSPF host number for which the OSPF host table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipOspfHostInfoIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.10.1.2
The IP Address of the OSPF host.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipOspfHostInfoAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.10.1.3
The area index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipOspfHostInfoCost 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.10.1.4
The cost of the corresponding host.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipOspfHostInfoState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.10.1.5
Enable or disable an OSPF Host
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

ipOspfRedistributeInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11
OBJECT IDENTIFIER    

ipOspfRedistributeStaticInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.1
OBJECT IDENTIFIER    

ipOspfRedistributeStaticInfoMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.1.1
The metric to be assigned to static routes. A value of 0 indicates none.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

ipOspfRedistributeStaticInfoMetricType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.1.2
The AS External metric type for static routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ipOspfRedistributeStaticInfoOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.1.3
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipOspfRedistributeFixedInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.2
OBJECT IDENTIFIER    

ipOspfRedistributeFixedInfoMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.2.1
The export metric for fixed routes. A value of 0 indicates none
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

ipOspfRedistributeFixedInfoMetricType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.2.2
The AS External metric type for fixed routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ipOspfRedistributeFixedInfoOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.2.3
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipOspfRedistributeRipInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.3
OBJECT IDENTIFIER    

ipOspfRedistributeRipInfoMetric 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.3.1
The export metric for RIP routes. A value of 0 indicates none
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..16777215  

ipOspfRedistributeRipInfoMetricType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.3.2
The AS External metric type for RIP routes.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), type1(2), type2(3)  

ipOspfRedistributeRipInfoOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.11.3.3
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipOspfMd5keyInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.12
The table of OSPF MD5 keys Information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpOspfMd5keyInfoEntry

ipOspfMd5keyInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.12.1
Information about an OSPF MD keys table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpOspfMd5keyInfoEntry  

ipOspfMd5keyInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.12.1.1
The OSPF MD5 Key number for which the OSPF MdKey table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ipOspfMd5keyInfoKey 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.8.11.12.1.2
The character string representing the MD5 Key.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..16)  

vrrpInfoVirtRtrTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1
The table of VRRP virtual router run-time information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpInfoVirtRtrTableEntry

vrrpInfoVirtRtrTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1
The run-time information about a VRRP virtual router.
Status: current Access: not-accessible
OBJECT-TYPE    
  VrrpInfoVirtRtrTableEntry  

vrrpInfoVirtRtrIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.1
The VRRP virtual router index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vrrpInfoVirtRtrConfig 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.2
The status of the VRRP virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vrrpInfoVirtRtrID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.3
The VRRP virtual router identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

vrrpInfoVirtRtrAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.4
The VRRP virtual router IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vrrpInfoVirtRtrIfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.5
The IfIndex that the VRRP virtual router is representing.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vrrpInfoVirtRtrPriority 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.6
The priority value to be used by the specified VRRP virtual routers.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

vrrpInfoVirtRtrState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.7
The VRRP virtual router state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER init(1), master(2), backup(3)  

vrrpInfoVirtRtrOwnership 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.8
The VRRP virtual router ownership status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER owner(1), renter(2)  

vrrpInfoVirtRtrServer 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.9
The VRRP server state identifies virtual routers that support Layer 4 services.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

vrrpInfoVirtRtrProxy 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.3.1.1.10
The VRRP proxy state identifies virtual proxy routers.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ospfGeneralInfo 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1
OBJECT IDENTIFIER    

ospfVersion 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.1
OSPF version.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ospfVersion1(1), ospfVersion2(2)  

ospfRouterID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.2
The router ID of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfStartTime 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.3
The time when ospf has been started.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfProcessUptime 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.4
The time since ospf has been started.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ospfLsTypesSupported 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.5
The Link State Types that are supported.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfAreaBorderRouter 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.6
Area Border Router Role.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ospfAreaBoundaryRouter 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.7
Area Boundary Router Role.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ospfExternalLsa 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.8
The number of external LSAs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfIntfCountForRouter 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.9
The number of interfaces for this router.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfVlinkCountForRouter 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.10
The number of virtual links for this router.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfNewLsaReceived 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.11
The number of new LSAs reveived.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfTotalLsaOriginated 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.12
The number of LSAs originated.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfTotalNumberOfLsdbEntries 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.13
Total number of entries in the Link State Database.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfTotalNeighbours 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.14
The total number of OSPF neighbours.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfNbrInInitState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.15
The number of neighbours in the initial state of exchange.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfNbrInExchState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.16
The number of neighbours in the exchange state.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfNbrInFullState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.17
The number of neighbours in the Full state of exchange.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfTotalAreas 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.18
The Total number of areas.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfTotalTransitAreas 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.19
The Total number of Transit areas.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfTotalNssaAreas 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.1.20
The Total number of NSSA areas.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfAreaInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2
The table of OSPF Area information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfAreaInfoEntry

ospfAreaInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1
Information about a OSPF area.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfAreaInfoEntry  

ospfAreaInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.1
The OSPF area number for which the OSPF info table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfAreaInfoId 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.2
The IP address of the OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfAreaInfoStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.3
Area Status: disabled(0), enabled(1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

ospfTotalNumberOfInterfaces 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.4
The total number of interfaces for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfNumberOfInterfacesUp 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.5
The number of interfaces UP in area.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfAreaInfoAuthType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.6
Type of authentication being used: none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), password(2), md5(3)  

ospfAreaInfoSPF 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.7
The number of times SPF ran.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfNumberOfLsdbEntries 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.8
The number of Link State Database entries for this OSPF area.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfAreaInfoAreaBorderRouter 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.9
The Area Border Router count.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfAreaInfoASBoundaryRouter 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.10
The AS Boundary Router count.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfAreaInfoTotalNeighbours 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.2.1.11
The total number of OSPF neighbors.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfIntfInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3
The table of OSPF Interface information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfIntfInfoEntry

ospfIntfInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1
Information about a OSPF interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfIntfInfoEntry  

ospfIfInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.1
The OSPF interface number for which the OSPF info table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfIfInfoIpAddress 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.2
The IP address of the OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfIfInfoArea 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.3
The index of the area that the interface belongs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

ospfIfInfoAdminStatus 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.4
Admin Status of the interface: down(0), up(1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(0), up(1)  

ospfIfInfoRouterID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.5
The router ID of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfIfInfoState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.6
The state of the interface: Down(0), Loopback(1), Waiting(2), P to P(3), DR(4), BackuDR(5), DR Other(6).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(0), loopback(1), waiting(2), ptop(3), dr(4), backupdr(5), drother(6)  

ospfIfInfoPriority 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.7
Interface router priority
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

ospfIfInfoDesignatedRouterID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.8
The OSPF Designated Router ID for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfIfInfoDesignatedRouterIpAddress 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.9
The OSPF Designated Router IP Address for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfIfInfoBackupDesignatedRouterID 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.10
The OSPF Backup Designated Router ID for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfIfInfoBackupDesignatedRouterIpAddress 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.11
The OSPF Backup Designated Router Ip Address for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfIfInfoHello 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.12
The hello timer for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ospfIfInfoDead 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.13
The dead timer for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ospfIfInfoWait 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.14
The OSPF Wait interval for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfIfInfoRetransmit 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.15
The retransmit interval for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3600  

ospfIfInfoTransitDelay 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.16
The transit delay for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..3600  

ospfIfInfoTotalNeighbours 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.17
The total number of neighbours for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfIfInfoEvents 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.18
The total number of events for this OSPF interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfIfInfoAuthType 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.3.1.19
Type of authentication being used: none(1) - no authentication, password(2) - use password
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), password(1)  

ospfIfNbrTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5
The table of OSPF Interface Neighbor information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OspfIfNbrEntry

ospfIfNbrEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1
Information about a OSPF interface, neighbor pair.
Status: current Access: not-accessible
OBJECT-TYPE    
  OspfIfNbrEntry  

ospfIfNbrIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1.1
The OSPF Interface number for which this Interface/Nbr table is related.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfIfNbrIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1.2
The OSPF Neighbor ID .
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfIfNbrPriority 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1.3
The priority of the OSPF neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ospfIfNbrState 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1.4
The state of the OSPF neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(1), attempt(2), init(3), twoway(4), exStart(5), exchange(6), loading(7), full(8)  

ospfIfNbrDesignatedRtr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1.5
The IP Address of the Designated Router for this OSPF Neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfIfNbrBackupDesignatedRtr 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1.6
The IP Address of the backup designated Router for this OSPF Neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ospfIfNbrIpAddress 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.3.4.5.1.7
The IP Address of the OSPF Neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vrrpOperVirtRtrTable 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.4.1.1
An entry in the table of virtual routers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrrpOperVirtRtrEntry

vrrpOperVirtRtrEntry 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.4.1.1.1
A row in the vrrpOperVirtRtrTable
Status: current Access: not-accessible
OBJECT-TYPE    
  VrrpOperVirtRtrEntry  

vrrpOperVirtRtrIndex 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.4.1.1.1.1
The index for the VRRP virtual router.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vrrpOperVirtRtrBackup 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.4.1.1.1.2
When set to a value of 'backup(2)' it forces the specified master virtual router into backup mode. 'ok(1)' is returned when the object os read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), backup(2)  

vrrpOperVirtRtrGroupBackup 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.4.1.2
When set to a value of 'backup(2)' it forces the specified master virtual router group into backup mode. 'ok(1)' is returned when the object os read.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), backup(2)