BLADETYPE2-PHYSICAL-MIB
File:
BLADETYPE2-PHYSICAL-MIB.mib (138215 bytes)
Imported modules
Imported symbols
Defined Types
HotlinksCurCfgTriggerTableEntry |
|
SEQUENCE |
|
|
|
|
hotlinksCurCfgTriggerId |
Integer32 |
|
|
hotlinksCurCfgTriggerState |
INTEGER |
|
|
hotlinksCurCfgTriggerPreemptState |
INTEGER |
|
|
hotlinksCurCfgTriggerFdelay |
Integer32 |
|
|
hotlinksCurCfgTriggerMasterPort |
Integer32 |
|
|
hotlinksCurCfgTriggerMasterTrunk |
Integer32 |
|
|
hotlinksCurCfgTriggerBackupPort |
Integer32 |
|
|
hotlinksCurCfgTriggerBackupTrunk |
Integer32 |
|
HotlinksNewCfgTriggerTableEntry |
|
SEQUENCE |
|
|
|
|
hotlinksNewCfgTriggerId |
Integer32 |
|
|
hotlinksNewCfgTriggerState |
INTEGER |
|
|
hotlinksNewCfgTriggerPreemptState |
INTEGER |
|
|
hotlinksNewCfgTriggerFdelay |
Integer32 |
|
|
hotlinksNewCfgTriggerMasterPort |
Integer32 |
|
|
hotlinksNewCfgTriggerMasterTrunk |
Integer32 |
|
|
hotlinksNewCfgTriggerBackupPort |
Integer32 |
|
|
hotlinksNewCfgTriggerBackupTrunk |
Integer32 |
|
HotlinksStatsTriggerTableEntry |
|
SEQUENCE |
|
|
|
|
hotlinksStatsTriggerId |
Integer32 |
|
|
hotlinksStatsTriggerMasterActive |
Integer32 |
|
|
hotlinksStatsTriggerBackupActive |
Integer32 |
|
|
hotlinksStatsTriggerFdbUpdate |
Integer32 |
|
|
hotlinksStatsTriggerFdbFailed |
Integer32 |
|
HotlinksInfoTriggerTableEntry |
|
SEQUENCE |
|
|
|
|
hotlinksInfoTriggerId |
Integer32 |
|
|
hotlinksInfoTriggerState |
INTEGER |
|
|
hotlinksInfoTriggerPreemptState |
INTEGER |
|
|
hotlinksInfoTriggerFdelay |
Integer32 |
|
|
hotlinksInfoTriggerActive |
DisplayString |
|
VlanCurCfgTableEntry |
|
SEQUENCE |
|
|
|
|
vlanCurCfgVlanId |
Integer32 |
|
|
vlanCurCfgVlanName |
DisplayString |
|
|
vlanCurCfgPorts |
OCTET STRING |
|
|
vlanCurCfgState |
INTEGER |
|
|
vlanCurCfgStg |
Integer32 |
|
VlanNewCfgTableEntry |
|
SEQUENCE |
|
|
|
|
vlanNewCfgVlanId |
Integer32 |
|
|
vlanNewCfgVlanName |
DisplayString |
|
|
vlanNewCfgPorts |
OCTET STRING |
|
|
vlanNewCfgState |
INTEGER |
|
|
vlanNewCfgAddPort |
Integer32 |
|
|
vlanNewCfgRemovePort |
Integer32 |
|
|
vlanNewCfgDelete |
INTEGER |
|
|
vlanNewCfgStg |
Integer32 |
|
TrunkGroupCurCfgTableEntry |
|
SEQUENCE |
|
|
|
|
trunkGroupCurCfgIndex |
Integer32 |
|
|
trunkGroupCurCfgPorts |
OCTET STRING |
|
|
trunkGroupCurCfgState |
INTEGER |
|
TrunkGroupNewCfgTableEntry |
|
SEQUENCE |
|
|
|
|
trunkGroupNewCfgIndex |
Integer32 |
|
|
trunkGroupNewCfgPorts |
OCTET STRING |
|
|
trunkGroupNewCfgAddPort |
Integer32 |
|
|
trunkGroupNewCfgRemovePort |
Integer32 |
|
|
trunkGroupNewCfgState |
INTEGER |
|
|
trunkGroupNewCfgDelete |
INTEGER |
|
StgCurCfgTableEntry |
|
SEQUENCE |
|
|
|
|
stgCurCfgIndex |
Integer32 |
|
|
stgCurCfgState |
INTEGER |
|
|
stgCurCfgVlanBmap1 |
OCTET STRING |
|
|
stgCurCfgVlanBmap2 |
OCTET STRING |
|
|
stgCurCfgPriority |
INTEGER |
|
|
stgCurCfgBrgHelloTime |
INTEGER |
|
|
stgCurCfgBrgForwardDelay |
INTEGER |
|
|
stgCurCfgBrgMaxAge |
INTEGER |
|
|
stgCurCfgAgingTime |
INTEGER |
|
|
stgCurCfgVlanBmap |
OCTET STRING |
|
StgNewCfgTableEntry |
|
SEQUENCE |
|
|
|
|
stgNewCfgIndex |
Integer32 |
|
|
stgNewCfgState |
INTEGER |
|
|
stgNewCfgDefaultCfg |
INTEGER |
|
|
stgNewCfgAddVlan |
Integer32 |
|
|
stgNewCfgRemoveVlan |
Integer32 |
|
|
stgNewCfgVlanBmap1 |
OCTET STRING |
|
|
stgNewCfgVlanBmap2 |
OCTET STRING |
|
|
stgNewCfgPriority |
INTEGER |
|
|
stgNewCfgBrgHelloTime |
INTEGER |
|
|
stgNewCfgBrgForwardDelay |
INTEGER |
|
|
stgNewCfgBrgMaxAge |
INTEGER |
|
|
stgNewCfgAgingTime |
INTEGER |
|
|
stgNewCfgVlanBmap |
OCTET STRING |
|
StgCurCfgPortTableEntry |
|
SEQUENCE |
|
|
|
|
stgCurCfgStgIndex |
Integer32 |
|
|
stgCurCfgPortIndex |
Integer32 |
|
|
stgCurCfgPortState |
INTEGER |
|
|
stgCurCfgPortPriority |
INTEGER |
|
|
stgCurCfgPortPathCost |
INTEGER |
|
|
stgCurCfgPortLink |
INTEGER |
|
|
stgCurCfgPortEdge |
INTEGER |
|
|
stgCurCfgPortFastFwd |
INTEGER |
|
StgNewCfgPortTableEntry |
|
SEQUENCE |
|
|
|
|
stgNewCfgStgIndex |
Integer32 |
|
|
stgNewCfgPortIndex |
Integer32 |
|
|
stgNewCfgPortState |
INTEGER |
|
|
stgNewCfgPortPriority |
INTEGER |
|
|
stgNewCfgPortPathCost |
INTEGER |
|
|
stgNewCfgPortLink |
INTEGER |
|
|
stgNewCfgPortEdge |
INTEGER |
|
|
stgNewCfgPortFastFwd |
INTEGER |
|
MstCistCurCfgPortTableEntry |
|
SEQUENCE |
|
|
|
|
mstCistCurCfgPortIndex |
Integer32 |
|
|
mstCistCurCfgPortPriority |
INTEGER |
|
|
mstCistCurCfgPortPathCost |
INTEGER |
|
|
mstCistCurCfgPortLinkType |
INTEGER |
|
|
mstCistCurCfgPortEdge |
INTEGER |
|
|
mstCistCurCfgPortStpState |
INTEGER |
|
|
mstCistCurCfgPortHelloTime |
INTEGER |
|
MstCistNewCfgPortTableEntry |
|
SEQUENCE |
|
|
|
|
mstCistNewCfgPortIndex |
Integer32 |
|
|
mstCistNewCfgPortPriority |
INTEGER |
|
|
mstCistNewCfgPortPathCost |
INTEGER |
|
|
mstCistNewCfgPortLinkType |
INTEGER |
|
|
mstCistNewCfgPortEdge |
INTEGER |
|
|
mstCistNewCfgPortStpState |
INTEGER |
|
|
mstCistNewCfgPortHelloTime |
INTEGER |
|
PmCurCfgPortMonitorEntry |
|
SEQUENCE |
|
|
|
|
pmCurCfgPmirrMoniPortIndex |
Integer32 |
|
|
pmCurCfgPmirrMirrPortIndex |
Integer32 |
|
|
pmCurCfgPmirrDirection |
INTEGER |
|
PmNewCfgPortMonitorEntry |
|
SEQUENCE |
|
|
|
|
pmNewCfgPmirrMoniPortIndex |
Integer32 |
|
|
pmNewCfgPmirrMirrPortIndex |
Integer32 |
|
|
pmNewCfgPmirrDirection |
INTEGER |
|
|
pmNewCfgPmirrDelete |
INTEGER |
|
|
pmNewCfgPmonDelete |
INTEGER |
|
LacpCurPortCfgTableEntry |
|
SEQUENCE |
|
|
|
|
lacpCurPortCfgTableId |
Integer32 |
|
|
lacpCurPortState |
INTEGER |
|
|
lacpCurPortActorPortPriority |
INTEGER |
|
|
lacpCurPortActorAdminKey |
INTEGER |
|
LacpNewPortCfgTableEntry |
|
SEQUENCE |
|
|
|
|
lacpNewPortCfgTableId |
Integer32 |
|
|
lacpNewPortState |
INTEGER |
|
|
lacpNewPortActorPortPriority |
INTEGER |
|
|
lacpNewPortActorAdminKey |
INTEGER |
|
StgStatsPortTableEntry |
|
SEQUENCE |
|
|
|
|
stgStatsStpIndex |
Integer32 |
|
|
stgStatsPortIndex |
Integer32 |
|
|
stgStatsPortRcvCfgBpdus |
Counter32 |
|
|
stgStatsPortRcvTcnBpdus |
Counter32 |
|
|
stgStatsPortXmtCfgBpdus |
Counter32 |
|
|
stgStatsPortXmtTcnBpdus |
Counter32 |
|
LacpStatsTableEntry |
|
SEQUENCE |
|
|
|
|
lacpStatsIndex |
Integer32 |
|
|
lacpdusRx |
Integer32 |
|
|
markerpdusRx |
Integer32 |
|
|
markerresponsepdusRx |
Integer32 |
|
|
unknownRx |
Integer32 |
|
|
illegalRx |
Integer32 |
|
|
lacpdusTx |
Integer32 |
|
|
markerpdusTx |
Integer32 |
|
|
markerresponsepdusTx |
Integer32 |
|
FdbEntry |
|
SEQUENCE |
|
|
|
|
fdbMacAddr |
PhysAddress |
|
|
fdbVlan |
Integer32 |
|
|
fdbSrcPort |
Integer32 |
|
|
fdbSrcTrunk |
Integer32 |
|
|
fdbState |
INTEGER |
|
|
fdbRefSps |
DisplayString |
|
|
fdbLearnedPort |
Integer32 |
|
StpInfoTableEntry |
|
SEQUENCE |
|
|
|
|
stpInfoIndex |
Integer32 |
|
|
stpInfoState |
INTEGER |
|
|
stgInfoVlanBmap |
OCTET STRING |
|
|
stpInfoTimeSinceTopChange |
TimeTicks |
|
|
stpInfoTopChanges |
Counter32 |
|
|
stpInfoDesignatedRoot |
BridgeId |
|
|
stpInfoRootCost |
Integer32 |
|
|
stpInfoRootPort |
Integer32 |
|
|
stpInfoHelloTime |
Integer32 |
|
|
stpInfoMaxAge |
Integer32 |
|
|
stpInfoForwardDelay |
Integer32 |
|
|
stpInfoHoldTime |
Integer32 |
|
|
stpInfoBrgPriority |
INTEGER |
|
|
stpInfoBrgHelloTime |
INTEGER |
|
|
stpInfoBrgForwardDelay |
INTEGER |
|
|
stpInfoBrgMaxAge |
INTEGER |
|
|
stpInfoAgingTime |
INTEGER |
|
StpInfoPortTableEntry |
|
SEQUENCE |
|
|
|
|
stpInfoPortStpIndex |
Integer32 |
|
|
stpInfoPortIndex |
Integer32 |
|
|
stpInfoPortState |
INTEGER |
|
|
stpInfoPortDesignatedRoot |
BridgeId |
|
|
stpInfoPortDesignatedCost |
Integer32 |
|
|
stpInfoPortDesignatedBridge |
BridgeId |
|
|
stpInfoPortDesignatedPort |
OCTET STRING |
|
|
stpInfoPortForwardTransitions |
Counter32 |
|
|
stpInfoPortPathCost |
Integer32 |
|
CistInfoPortTableEntry |
|
SEQUENCE |
|
|
|
|
cistInfoPortIndex |
Integer32 |
|
|
cistInfoPortPriority |
Integer32 |
|
|
cistInfoPortPathCost |
Integer32 |
|
|
cistInfoPortState |
INTEGER |
|
|
cistInfoPortRole |
INTEGER |
|
|
cistInfoPortDesignatedBridge |
BridgeId |
|
|
cistInfoPortDesignatedPort |
OCTET STRING |
|
|
cistInfoPortLinkType |
INTEGER |
|
|
cistInfoPortHelloTime |
INTEGER |
|
LacpInfoPortTableEntry |
|
SEQUENCE |
|
|
|
|
lacpInfoPortIndex |
Integer32 |
|
|
lacpInfoPortSelected |
INTEGER |
|
|
lacpInfoPortNtt |
INTEGER |
|
|
lacpInfoPortReadyN |
INTEGER |
|
|
lacpInfoPortMoved |
INTEGER |
|
Dot1xCurCfgPortEntry |
|
SEQUENCE |
|
|
|
|
dot1xCurCfgPortIndex |
Integer32 |
|
|
dot1xCurCfgPortMode |
INTEGER |
|
|
dot1xCurCfgPortQtPeriod |
INTEGER |
|
|
dot1xCurCfgPortTxPeriod |
INTEGER |
|
|
dot1xCurCfgPortSupTmout |
INTEGER |
|
|
dot1xCurCfgPortSrvTmout |
INTEGER |
|
|
dot1xCurCfgPortMaxRq |
INTEGER |
|
|
dot1xCurCfgPortRaPeriod |
INTEGER |
|
|
dot1xCurCfgPortReAuth |
INTEGER |
|
Dot1xNewCfgPortEntry |
|
SEQUENCE |
|
|
|
|
dot1xNewCfgPortIndex |
Integer32 |
|
|
dot1xNewCfgPortMode |
INTEGER |
|
|
dot1xNewCfgPortQtPeriod |
INTEGER |
|
|
dot1xNewCfgPortTxPeriod |
INTEGER |
|
|
dot1xNewCfgPortSupTmout |
INTEGER |
|
|
dot1xNewCfgPortSrvTmout |
INTEGER |
|
|
dot1xNewCfgPortMaxRq |
INTEGER |
|
|
dot1xNewCfgPortRaPeriod |
INTEGER |
|
|
dot1xNewCfgPortReAuth |
INTEGER |
|
|
dot1xNewCfgPortDefault |
INTEGER |
|
|
dot1xNewCfgPortApplyGlobal |
INTEGER |
|
Dot1xInfoPortEntry |
|
SEQUENCE |
|
|
|
|
dot1xInfoPortIndex |
Integer32 |
|
|
dot1xInfoPortAuthMode |
INTEGER |
|
|
dot1xInfoPortAuthStatus |
INTEGER |
|
|
dot1xInfoPortCtrlDir |
INTEGER |
|
|
dot1xInfoPortAuthPAEState |
INTEGER |
|
|
dot1xInfoPortBackAuthState |
INTEGER |
|
FdbNewCfgStaticEntry |
|
SEQUENCE |
|
|
|
|
fdbNewCfgEntryIndex |
Integer32 |
|
|
fdbNewCfgAddVlan |
Integer32 |
|
|
fdbNewCfgAddPort |
Integer32 |
|
|
fdbNewCfgAddMac |
PhysAddress |
|
|
fdbNewCfgDelStaticEntry |
INTEGER |
|
Dot1pInfoPriorityCOSEntry |
|
SEQUENCE |
|
|
|
|
dot1pInfoPriorityIndex |
INTEGER |
|
|
dot1pInfoPriorityCOSQueue |
INTEGER |
|
|
dot1pInfoPriorityCOSWeight |
INTEGER |
|
Dot1pInfoPortEntry |
|
SEQUENCE |
|
|
|
|
dot1pInfoPortIndex |
Integer32 |
|
|
dot1pInfoPortPriority |
INTEGER |
|
|
dot1pInfoPortCOSq |
INTEGER |
|
|
dot1pInfoPortWeight |
INTEGER |
|
VlanInfoTableEntry |
|
SEQUENCE |
|
|
|
|
vlanInfoId |
INTEGER |
|
|
vlanInfoName |
DisplayString |
|
|
vlanInfoStatus |
INTEGER |
|
|
vlanInfoPorts |
OCTET STRING |
|
TrunkGroupInfoTableEntry |
|
SEQUENCE |
|
|
|
|
trunkGroupInfoIndex |
Integer32 |
|
|
trunkGroupInfoState |
INTEGER |
|
|
trunkGroupInfoPorts |
OCTET STRING |
|
Defined Values
layer2 |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2 |
The MIB module for the Layer 2 configuration, statistics and
information . |
MODULE-IDENTITY |
|
|
|
layer2Configs |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1 |
OBJECT IDENTIFIER |
|
|
|
layer2Stats |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2 |
OBJECT IDENTIFIER |
|
|
|
layer2Info |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3 |
OBJECT IDENTIFIER |
|
|
|
layer2Oper |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.4 |
OBJECT IDENTIFIER |
|
|
|
vlan |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1 |
OBJECT IDENTIFIER |
|
|
|
trunkgroup |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2 |
OBJECT IDENTIFIER |
|
|
|
stgCfg |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3 |
OBJECT IDENTIFIER |
|
|
|
mirroring |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4 |
OBJECT IDENTIFIER |
|
|
|
mstCfg |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5 |
OBJECT IDENTIFIER |
|
|
|
lacp |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6 |
OBJECT IDENTIFIER |
|
|
|
thash |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7 |
OBJECT IDENTIFIER |
|
|
|
l2GeneralCfg |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.8 |
OBJECT IDENTIFIER |
|
|
|
ufd |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9 |
OBJECT IDENTIFIER |
|
|
|
dot1x |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11 |
OBJECT IDENTIFIER |
|
|
|
fdb |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12 |
OBJECT IDENTIFIER |
|
|
|
hotlinksCfg |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14 |
OBJECT IDENTIFIER |
|
|
|
hotlinksCurCfgOnState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.1 |
Hot Links ON/OFF setting. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
hotlinksNewCfgOnState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.2 |
Hot Links ON/OFF settings. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
hotlinksCurCfgFdbUpdateState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.3 |
Enable/disable Hot Links FDB Update setting. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
hotlinksNewCfgFdbUpdateState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.4 |
Enable/disable Hot Links FDB Update setting. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
hotlinksMaxTriggerEntries |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.5 |
The maximum number of entries in the Hot Links Trigger Table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hotlinksCurCfgTriggerTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.6.1 |
A row in the Hot Links Trigger Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HotlinksCurCfgTriggerTableEntry |
|
|
hotlinksCurCfgTriggerState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.6.1.2 |
Enable/disable Trigger state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
hotlinksCurCfgTriggerPreemptState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.6.1.3 |
Enable/disable Preemption state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
hotlinksNewCfgTriggerTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.7.1 |
A row in the Hot Links Trigger Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HotlinksNewCfgTriggerTableEntry |
|
|
hotlinksNewCfgTriggerState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.7.1.2 |
Enable/disable Trigger state. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
hotlinksNewCfgTriggerPreemptState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.14.7.1.3 |
Enable/disable Preemption state. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
thashL2 |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7.1 |
OBJECT IDENTIFIER |
|
|
|
mirrPortMirr |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1 |
OBJECT IDENTIFIER |
|
|
|
mstGeneralCfg |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.1 |
OBJECT IDENTIFIER |
|
|
|
mstCistCfg |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2 |
OBJECT IDENTIFIER |
|
|
|
ufdGeneralCfg |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1 |
OBJECT IDENTIFIER |
|
|
|
fdbGeneralCfg |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.1 |
OBJECT IDENTIFIER |
|
|
|
fdbStats |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.1 |
OBJECT IDENTIFIER |
|
|
|
stpStats |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2 |
OBJECT IDENTIFIER |
|
|
|
lacpStats |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3 |
OBJECT IDENTIFIER |
|
|
|
ufdStats |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.4 |
OBJECT IDENTIFIER |
|
|
|
hotlinksStats |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.6 |
OBJECT IDENTIFIER |
|
|
|
hotlinksStatsTriggerTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.6.1.1 |
A row in the Hot Links Trigger Table Stats. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HotlinksStatsTriggerTableEntry |
|
|
cistInfo |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1 |
OBJECT IDENTIFIER |
|
|
|
fdbInfo |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2 |
OBJECT IDENTIFIER |
|
|
|
stpInfo |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3 |
OBJECT IDENTIFIER |
|
|
|
lacpInfo |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.4 |
OBJECT IDENTIFIER |
|
|
|
dot1xInfo |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5 |
OBJECT IDENTIFIER |
|
|
|
dot1pInfo |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6 |
OBJECT IDENTIFIER |
|
|
|
genInfo |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.7 |
OBJECT IDENTIFIER |
|
|
|
vlanInfo |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.8 |
OBJECT IDENTIFIER |
|
|
|
hotlinksInfo |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.10 |
OBJECT IDENTIFIER |
|
|
|
hotlinksInfoOnState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.10.1 |
Hot Links ON/OFF setting info. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
hotlinksInfoFdbUpdateState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.10.2 |
Enable/disable Hot Links FDB Update setting info. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
hotlinksInfoTriggerTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.10.3.1 |
A row in the Hot Links Trigger Table Info. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HotlinksInfoTriggerTableEntry |
|
|
hotlinksInfoTriggerState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.10.3.1.2 |
Enable/disable Trigger state info. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
hotlinksInfoTriggerPreemptState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.10.3.1.3 |
Enable/disable Preemption state info. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
vlanMaxEnt |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.1 |
The maximum number of rows in the VLAN configuration table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
vlanCurCfgTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.2.1 |
A row in the VLAN configuration table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VlanCurCfgTableEntry |
|
|
vlanCurCfgVlanId |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.2.1.1 |
The VLAN identifier. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
vlanCurCfgPorts |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.2.1.3 |
The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
vlanCurCfgState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.2.1.4 |
Enable or disable a VLAN |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(2), disabled(3) |
|
vlanCurCfgStg |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.2.1.6 |
The Spanning Tree Group for the VLAN. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
vlanNewCfgTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1 |
A row in the VLAN configuration table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VlanNewCfgTableEntry |
|
|
vlanNewCfgVlanId |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1.1 |
The VLAN identifier. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
vlanNewCfgPorts |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1.3 |
The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
vlanNewCfgState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1.4 |
Enable or disable a VLAN |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(2), disabled(3) |
|
vlanNewCfgAddPort |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1.5 |
The port to be added to the specified VLAN. A '0' value is
returned when read. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
vlanNewCfgRemovePort |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1.6 |
The port to be removed from the specified VLAN. A '0'
value is returned when read. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
vlanNewCfgDelete |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1.7 |
This is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), delete(2) |
|
vlanNewCfgStg |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.1.3.1.9 |
The Spanning Tree Group for the VLAN. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
trunkGroupTableMaxSize |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.1 |
The maximum number of entries in trunk group table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
trunkGroupCurCfgTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.2.1 |
A row in the trunk group configuration table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TrunkGroupCurCfgTableEntry |
|
|
trunkGroupCurCfgIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.2.1.1 |
The identifier of the trunk group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
trunkGroupCurCfgPorts |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.2.1.2 |
The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
trunkGroupCurCfgState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.2.1.3 |
Enable or disable a trunk group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
trunkGroupNewCfgTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.3.1 |
A row in the trunk group configuration table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TrunkGroupNewCfgTableEntry |
|
|
trunkGroupNewCfgIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.3.1.1 |
The identifier of the trunk group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
trunkGroupNewCfgPorts |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.3.1.2 |
The port list in the trunk group. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
trunkGroupNewCfgAddPort |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.3.1.3 |
The port to be added in the trunk group. When read, 0 is returned. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
trunkGroupNewCfgRemovePort |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.3.1.4 |
The port to be deleted from the trunk group. when read, 0
is returned. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
trunkGroupNewCfgState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.3.1.5 |
Enable or disable a trunk group. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
trunkGroupNewCfgDelete |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.2.3.1.6 |
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), delete(2) |
|
l2ThashCurCfgSmacState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7.1.1 |
Enable or disable smac hash. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
l2ThashNewCfgSmacState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7.1.2 |
Enable or disable smac hash. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
l2ThashCurCfgDmacState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7.1.3 |
Enable or disable dmac hash. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
l2ThashNewCfgDmacState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7.1.4 |
Enable or disable dmac hash. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
l2ThashCurCfgSipState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7.1.5 |
Enable or disable sip hash. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
l2ThashNewCfgSipState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7.1.6 |
Enable or disable sip hash. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
l2ThashCurCfgDipState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7.1.7 |
Enable or disable dip hash. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
l2ThashNewCfgDipState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.7.1.8 |
Enable or disable dip hash. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
stgCurCfgTable |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1 |
The table of Spanning Tree Group configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
StgCurCfgTableEntry |
|
stgCurCfgTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1 |
Information about a particular Spanning Tree Group configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
StgCurCfgTableEntry |
|
|
stgCurCfgIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.1 |
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stgCurCfgState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.2 |
Turn on of off Spanning Tree operation of a particular Spanning
Tree Group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
stgCurCfgVlanBmap1 |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.3 |
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 2048.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree |
Status: obsolete |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
stgCurCfgVlanBmap2 |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.4 |
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 2049 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 2057
|| ||
|| ||___ vlan 2056
|| |____ vlan 2055
|| . . .
||_________ vlan 2050
|__________ vlan 2049 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree |
Status: obsolete |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
stgCurCfgPriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.5 |
The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
stgCurCfgBrgHelloTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.6 |
The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..10 |
|
stgCurCfgBrgForwardDelay |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.7 |
The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
4..30 |
|
stgCurCfgBrgMaxAge |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.8 |
The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
6..40 |
|
stgCurCfgAgingTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.9 |
The timeout period in seconds for aging out dynamically learned
forwarding information. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
stgCurCfgVlanBmap |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.1.1.10 |
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4095.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..512) |
|
stgNewCfgTable |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2 |
The table of Spanning Tree Groups configuration in the new_config. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
StgNewCfgTableEntry |
|
stgNewCfgTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1 |
Information about a particular Spanning Tree Group configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
StgNewCfgTableEntry |
|
|
stgNewCfgIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.1 |
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stgNewCfgState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.2 |
Turn on of off Spanning Tree operation of a particular Spanning
Tree Group. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
stgNewCfgDefaultCfg |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.3 |
Setting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anything. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
default-config(1) |
|
stgNewCfgAddVlan |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.4 |
The vlan to be added to the specified Spanning Tree Group. A
'0' value is returned when read. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stgNewCfgRemoveVlan |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.5 |
The vlan to be removed from the specified Spanning Tree Group.
A '0' value is returned when read. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stgNewCfgVlanBmap1 |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.6 |
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 2048.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree |
Status: obsolete |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
stgNewCfgVlanBmap2 |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.7 |
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 2049 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 2057
|| ||
|| ||___ vlan 2056
|| |____ vlan 2055
|| . . .
||_________ vlan 2050
|__________ vlan 2049 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree |
Status: obsolete |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
stgNewCfgPriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.8 |
The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
stgNewCfgBrgHelloTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.9 |
The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..10 |
|
stgNewCfgBrgForwardDelay |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.10 |
The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
4..30 |
|
stgNewCfgBrgMaxAge |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.11 |
The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
6..40 |
|
stgNewCfgAgingTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.12 |
The timeout period in seconds for aging out dynamically learned
forwarding information. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
stgNewCfgVlanBmap |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.2.1.13 |
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4095.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..512) |
|
stgCurCfgPortTable |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3 |
The table of Spanning Tree Group port configuration in the
current_config. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
StgCurCfgPortTableEntry |
|
stgCurCfgPortTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1 |
Information about port configuration of a particular Spanning Tree
Group. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
StgCurCfgPortTableEntry |
|
|
stgCurCfgStgIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.1 |
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stgCurCfgPortIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.2 |
The port identifier of a particular Spanning Tree Group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stgCurCfgPortState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.3 |
Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
stgCurCfgPortPriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.4 |
The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
stgCurCfgPortPathCost |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.5 |
The contribution of this port to the path cost of paths towards the
spanning tree root which include this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
stgCurCfgPortLink |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.6 |
The type of the port link. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
auto(1), p2p(2), shared(3) |
|
stgCurCfgPortEdge |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.7 |
The state of port edge. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
stgCurCfgPortFastFwd |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.3.1.8 |
The state of port fast forwarding. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
stgNewCfgPortTable |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4 |
The table of Spanning Tree Group port configuration in the
new_config. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
StgNewCfgPortTableEntry |
|
stgNewCfgPortTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1 |
Information about port configuration of a particular Spanning Tree
Group. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
StgNewCfgPortTableEntry |
|
|
stgNewCfgStgIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.1 |
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stgNewCfgPortIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.2 |
The port identifier of a particular Spanning Tree Group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stgNewCfgPortState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.3 |
Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
stgNewCfgPortPriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.4 |
The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
stgNewCfgPortPathCost |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.5 |
The contribution of this port to the path cost of paths towards the
spanning tree root which include this port. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
stgNewCfgPortLink |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.6 |
The type of the port link. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
auto(1), p2p(2), shared(3) |
|
stgNewCfgPortEdge |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.7 |
The state of port edge. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
stgNewCfgPortFastFwd |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.3.4.1.8 |
The state of port fast forwarding. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
mstCurCfgState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.1.1 |
Enable or disable MSTP/RSTP |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(2), disabled(3) |
|
mstNewCfgState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.1.2 |
Enable or disable MSTP/RSTP |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(2), disabled(3) |
|
mstCurCfgRegionName |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.1.3 |
The Name for the Region's configuration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..32) |
|
mstNewCfgRegionName |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.1.4 |
The Name for the Region's configuration. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..32) |
|
mstCurCfgRegionVersion |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.1.5 |
Version of the MST Region. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
mstNewCfgRegionVersion |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.1.6 |
Version of the MST Region. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
mstCurCfgMaxHopCount |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.1.7 |
Indicates the maximum hop count value. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
4..60 |
|
mstNewCfgMaxHopCount |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.1.8 |
Indicates the maximum hop count value. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
4..60 |
|
mstCurCfgStpMode |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.1.9 |
The version of Spanning Tree Protocal the bridge is currently
running. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
mstp(1), rstp(2) |
|
mstNewCfgStpMode |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.1.10 |
The version of Spanning Tree Protocal the bridge is currently
running. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
mstp(1), rstp(2) |
|
mstCistDefaultCfg |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.1 |
Setting the value to default(1) will set the Multiple
Spanning Tree and member parameters to default. default(1) is
always returned when read, but it does not mean anything. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
default(1) |
|
mstCistCurCfgBridgePriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.2.1 |
The value of the writable portion of the Brigde Identifier comprising
of the first two octets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
mstCistNewCfgBridgePriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.2.2 |
The value of the writable portion of the Brigde Identifier comprising
of the first two octets. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
mstCistCurCfgBridgeMaxAge |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.2.5 |
The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
6..40 |
|
mstCistNewCfgBridgeMaxAge |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.2.6 |
The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
6..40 |
|
mstCistCurCfgBridgeForwardDelay |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.2.7 |
The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
4..30 |
|
mstCistNewCfgBridgeForwardDelay |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.2.8 |
The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
4..30 |
|
mstCistCurCfgVlanBmap |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.2.9 |
The vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the group |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..512) |
|
mstCistNewCfgVlanBmap |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.2.10 |
The vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the group |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..512) |
|
mstCistNewCfgAddVlan |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.2.11 |
The vlan to be added to the CIST Group. A
'0' value is returned when read. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
mstCistCurCfgPortTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1 |
Information about a particular CIST Port configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MstCistCurCfgPortTableEntry |
|
|
mstCistCurCfgPortIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1.1 |
The port number of the port for which this entry contains spanning
tree configuration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
mstCistCurCfgPortPriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1.2 |
The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..240 |
|
mstCistCurCfgPortPathCost |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1.3 |
The contribution of this port to the path cost of paths towards
the CIST Root which include this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..200000000 |
|
mstCistCurCfgPortLinkType |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1.4 |
The administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port should be treated as
having a shared media connection. A value of auto(1) indicates that
this port is considered to have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the MAC
entity is configured for full duplex operation, either through
auto-negotiation or by management means. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
auto(1), p2p(2), shared(3) |
|
mstCistCurCfgPortEdge |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1.5 |
The value of the Edge Port parameter. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
mstCistCurCfgPortStpState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1.6 |
Turn port's Spanning Tree on/off. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
mstCistCurCfgPortHelloTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.3.1.7 |
The amount of time between the transmission of Configuration Port
PDUs in seconds. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..10 |
|
mstCistNewCfgPortTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1 |
Information about a particular CIST Port configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MstCistNewCfgPortTableEntry |
|
|
mstCistNewCfgPortIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1.1 |
The port number of the port for which this entry contains spanning
tree configuration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
mstCistNewCfgPortPriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1.2 |
The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..240 |
|
mstCistNewCfgPortPathCost |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1.3 |
The contribution of this port to the path cost of paths towards
the CIST Root which include this port. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..200000000 |
|
mstCistNewCfgPortLinkType |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1.4 |
The administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port should be treated as
having a shared media connection. A value of auto(1) indicates that
this port is considered to have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the MAC
entity is configured for full duplex operation, either through
auto-negotiation or by management means. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
auto(1), p2p(2), shared(3) |
|
mstCistNewCfgPortEdge |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1.5 |
The value of the Edge Port parameter. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
mstCistNewCfgPortStpState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1.6 |
Turn port's Spanning Tree on/off. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
mstCistNewCfgPortHelloTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.5.2.4.1.7 |
The amount of time between the transmission of Configuration Port
PDUs in seconds. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..10 |
|
pmCurCfgPortMirrState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.1 |
The state of port-based port mirroring. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
pmNewCfgPortMirrState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.2 |
The state of port-based port mirroring. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
pmCurCfgPortMonitorEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.3.1 |
A row in the monitoring port table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PmCurCfgPortMonitorEntry |
|
|
pmCurCfgPmirrDirection |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.3.1.3 |
The type of traffic to be monitored with respect to the
mirrored port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
in(1), out(2), both(3) |
|
pmNewCfgPortMonitorEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.4.1 |
A row in the monitoring port table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PmNewCfgPortMonitorEntry |
|
|
pmNewCfgPmirrDirection |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.4.1.3 |
The type of traffic to be monitored with respect to the
mirrored port. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
in(1), out(2), both(3) |
|
pmNewCfgPmirrDelete |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.4.1.4 |
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), delete(2) |
|
pmNewCfgPmonDelete |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.4.1.4.1.10 |
Setting the value to delete(2) will delete the monitor
port. When read, other(1) is returned. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), delete(2) |
|
lacpCurSystemPriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.1 |
A 2-octet read-write value indicating the priority
value associated with the Actor's System ID. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
lacpNewSystemPriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.2 |
A 2-octet read-write value indicating the priority
value associated with the Actor's System ID. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
lacpCurSystemTimeoutTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.5 |
If a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
short(3), long(90) |
|
lacpNewSystemTimeoutTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.6 |
If a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
short(3), long(90) |
|
lacpCurPortCfgTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.7.1 |
A row in the LACP port configuration table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LacpCurPortCfgTableEntry |
|
|
lacpCurPortState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.7.1.2 |
LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(1), active(2), passive(3) |
|
lacpCurPortActorPortPriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.7.1.3 |
The priority value assigned to this Aggregation Port.
This 16-bit value is read-only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
lacpCurPortActorAdminKey |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.7.1.4 |
The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
lacpNewPortCfgTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.8.1 |
A row in the LACP port configuration table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LacpNewPortCfgTableEntry |
|
|
lacpNewPortState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.8.1.2 |
LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(1), active(2), passive(3) |
|
lacpNewPortActorPortPriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.8.1.3 |
The priority value assigned to this Aggregation Port.
This 16-bit value is read-write. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
lacpNewPortActorAdminKey |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.6.8.1.4 |
The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
upfastCurCfgState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.8.1 |
Enable or disable uplink fast |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
upfastNewCfgState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.8.2 |
Enable or disable uplink fast |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
updateCurCfgState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.8.3 |
UplinkFast station update rate: packets per second |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
10..200 |
|
updateNewCfgState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.8.4 |
UplinkFast station update rate: packets per second |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
10..200 |
|
fdbStatsCreates |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.1.1 |
Number of entries created in the Forwarding Database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
fdbStatsDeletes |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.1.2 |
Number of entries deleted from the Forwarding Database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
fdbStatsCurrent |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.1.3 |
Current number of entries in the Forwarding Database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
fdbStatsHiwat |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.1.4 |
Highest number of entries recorded at any given time in the
Forwarding Database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fdbStatsLookups |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.1.5 |
Number of entry lookups in the Forwarding Database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
fdbStatsLookupFails |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.1.6 |
Number of unsuccessful searches made in the Forwarding Database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
fdbStatsFinds |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.1.7 |
Number of searches in the Forwarding Database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
fdbStatsFindFails |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.1.8 |
Number of search failures in the Forwarding Database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
fdbStatsFindOrCreates |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.1.9 |
Number of entries found or created in the Forwarding Database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
fdbStatsOverflows |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.1.10 |
Number of entries overflowing the Forwarding Database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
stgStatsPortTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2.1.1 |
Statistics about port of a particular Spanning Tree Group. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
StgStatsPortTableEntry |
|
|
stgStatsStpIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2.1.1.1 |
The identifier of a particular Spanning Tree Group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stgStatsPortIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2.1.1.2 |
The port identifier of a particular Spanning Tree Group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stgStatsPortRcvCfgBpdus |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2.1.1.3 |
Number of Configuration BPDU's received on this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
stgStatsPortRcvTcnBpdus |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2.1.1.4 |
Number of TCN BPDU's received on this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
stgStatsPortXmtCfgBpdus |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2.1.1.5 |
Number of Configuration BPDU's trasmitted from the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
stgStatsPortXmtTcnBpdus |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.2.1.1.6 |
Number of TCN BPDU's trasmitted from the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
lacpStatsTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1 |
Lacp status info. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LacpStatsTableEntry |
|
|
lacpStatsIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.1 |
Index |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lacpdusRx |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.2 |
Valid LACPDUs received |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
markerpdusRx |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.3 |
Valid Marker PDUs received |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
markerresponsepdusRx |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.4 |
Valid Marker Rsp PDUs received |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
unknownRx |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.5 |
Unknown version/TLV type |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
illegalRx |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.6 |
Illegal subtype received |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lacpdusTx |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.7 |
LACPDUs transmitted |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
markerpdusTx |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.8 |
Market PDUs transmitted |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
markerresponsepdusTx |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.2.3.1.1.9 |
Marker Rsp PDUs transmitted |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fdbClear |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.1 |
Setting this value to clear(2) clears the entire master FDB. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ok(1), clear(2) |
|
fdbTable |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2 |
The table of FDB entries. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
FdbEntry |
|
fdbEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1 |
A row in the FDB table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FdbEntry |
|
|
fdbMacAddr |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1.1 |
The MAC address for the FDB entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
fdbVlan |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1.2 |
The VLAN ID for the FDB entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fdbSrcPort |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1.3 |
Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been learned but that the bridge does have some
forwarding/filtering information about this address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fdbState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1.4 |
The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(3) : the MAC address has been learned by the switch
flood(4) : the MAC address is a multicast destination address
trunk(6) : frames with this MAC address are forwarded to trunk
group
vir(7) : frames with this MAC address are forwarded for L3
processing |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), ignore(2), forward(3), flood(4), ffd(5), trunk(6), vir(7), vsr(8), vpr(9), other(10) |
|
fdbRefSps |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1.5 |
The referenced SPs associated with this FDB entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..32) |
|
fdbLearnedPort |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1.6 |
The learned port associated with this FDB entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fdbSrcTrunk |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.2.2.1.7 |
Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not associated with a trunk. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stpInfoTable |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1 |
The table of Spanning Tree Group information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
StpInfoTableEntry |
|
stpInfoTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1 |
Information about a particular Spanning Tree Group. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
StpInfoTableEntry |
|
|
stpInfoIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.1 |
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stpInfoState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.2 |
Turn on of off Spanning Tree operation of a particular Spanning
Tree Group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
stgInfoVlanBmap |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.3 |
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..512) |
|
stpInfoTimeSinceTopChange |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.4 |
The time (in hundredths of a second) since the last time a topology
change was detected by the bridge entity. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
stpInfoTopChanges |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.5 |
The total number of topology changes detected by this bridge since
the management entity was last reset or initialized. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
stpInfoDesignatedRoot |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.6 |
The bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value
is used as the Root Identifier parameter in all Configuration Bridge
PDUs originated by this node. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BridgeId |
|
|
stpInfoRootCost |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.7 |
The cost of the path to the root as seen from this bridge. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stpInfoRootPort |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.8 |
The port number of the port which offers the lowest cost path from
this bridge to the root bridge. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stpInfoMaxAge |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.9 |
The maximum age of Spanning Tree Protocol information learned from
the network on any port before it is discarded, in units of
hundredths of a second. This is the actual value that this bridge is
currently using. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stpInfoHelloTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.10 |
The amount of time between the transmission of Configuration bridge
PDUs by this node on any port when it is the root of the spanning
tree or trying to become so, in units of hundredths of a second.
This is the actual value that this bridge is currently using. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stpInfoForwardDelay |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.11 |
This time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the port
stays in each of the Listening and Learning states, which precede
the Forwarding state. This value is also used, when a topology
change has been detected and is underway, to age all dynamic entries
in the Forwarding Database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stpInfoHoldTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.12 |
This time value determines the interval length during which no more
than two Configuration bridge PDUs shall be transmitted by this node,
in units of hundredths of a second. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stpInfoBrgPriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.13 |
The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
stpInfoBrgHelloTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.14 |
The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..10 |
|
stpInfoBrgForwardDelay |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.15 |
The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
4..30 |
|
stpInfoBrgMaxAge |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.16 |
The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
6..40 |
|
stpInfoAgingTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.1.1.17 |
The timeout period in seconds for aging out dynamically learned
forwarding information. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
stpInfoPortTable |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2 |
The table of Spanning Tree Group port information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
StpInfoPortTableEntry |
|
stpInfoPortTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1 |
Information about port configuration for a particular Spanning Tree
Group. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
StpInfoPortTableEntry |
|
|
stpInfoPortStpIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.1 |
The identifier of a particular Spanning Tree Group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stpInfoPortIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.2 |
The port identifier of a particular Spanning Tree Group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stpInfoPortState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.3 |
The port's current state as defined by application of the Spanning
Tree Protocol. This state controls what action a port takes on
reception of a frame. If the bridge has detected a port that is
malfunctioning it will place that port into the broken(6) state.
For ports which are disabled, this object will have a value of
disabled(1). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6) |
|
stpInfoPortDesignatedRoot |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.4 |
The unique Bridge Identifier of the Bridge recorded as the Root in
the Configuration BPDUs transmitted by the Designated Bridge for the
segment to which the port is attached. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BridgeId |
|
|
stpInfoPortDesignatedCost |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.5 |
The path cost of the Designated Port of the segment connected to this
port. This value is compared to the Root Path Cost field in received
bridge PDUs. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
stpInfoPortDesignatedBridge |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.6 |
The Bridge Identifier of the bridge which this port considers to be
the Designated Bridge for this port's segment. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BridgeId |
|
|
stpInfoPortDesignatedPort |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.7 |
The Port Identifier of the port on the Designated Bridge for this
port's segment. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(2) |
|
stpInfoPortForwardTransitions |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.8 |
The number of times this port has transitioned from the Learning
state to the Forwarding state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
stpInfoPortPathCost |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.3.2.1.9 |
The path cost of the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cistRoot |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.1.1 |
The bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BridgeId |
|
|
cistRootPathCost |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.1.2 |
The cost of the path to the CIST Root as seen from this bridge. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cistRootPort |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.1.3 |
The Port Number of the Port which offers the lowest path cost from
this bridge to the CIST Root Bridge. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cistRootHelloTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.1.4 |
The amount of time between the transmission of Configuration bridge
PDUs in seconds. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cistRootMaxAge |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.1.5 |
The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cistRootForwardDelay |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.1.6 |
The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cistRegionalRoot |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.1.7 |
The bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BridgeId |
|
|
cistRegionalPathCost |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.1.8 |
The Cost of the path to the CIST Regional Root as seen from this
bridge. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cistBridgePriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.1.9 |
The value of the writable portion of the Brigde Identifier comprising
of the first two octets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
cistBridgeMaxAge |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.1.10 |
The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
6..40 |
|
cistBridgeForwardDelay |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.1.11 |
The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
4..30 |
|
cistMaxHopCount |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.1.12 |
Indicates the maximum hop count value. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
4..60 |
|
mstpDigest |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.1.13 |
The digest of the mstp. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..63) |
|
cistInfoPortTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1 |
Information about a particular CIST Port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CistInfoPortTableEntry |
|
|
cistInfoPortIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.1 |
The port number of the port for which this entry contains spanning
tree configuration. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cistInfoPortPriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.2 |
The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cistInfoPortPathCost |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.3 |
The contribution of this port to the path cost of paths towards
the CIST Root which include this port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cistInfoPortState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.4 |
Current state of the Port as defined by the Common
spanning tree protocol. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), discarding(2), learning(4), forwarding(5) |
|
cistInfoPortRole |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.5 |
Selected Port Role of the port for this spanning tree instance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), alternate(2), backup(3), root(4), designated(5), master(6), unknown(7) |
|
cistInfoPortDesignatedBridge |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.6 |
The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BridgeId |
|
|
cistInfoPortDesignatedPort |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.7 |
The Port identifier of the port on the Designated Bridge
for this port's segment. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(2) |
|
cistInfoPortLinkType |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.8 |
The point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port is being treated as
having a shared media connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
p2p(1), shared(2), unknown(3) |
|
cistInfoPortHelloTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.1.2.1.9 |
The amount of time between the transmission of Configuration Port
PDUs in seconds. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..10 |
|
lacpInfoPortTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.4.1.1 |
Information about a LACP port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LacpInfoPortTableEntry |
|
|
lacpInfoPortIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.4.1.1.1 |
The port identifier. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lacpInfoPortSelected |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.4.1.1.2 |
Selected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the selection logic has selected an appropriate Aggregator,
aggregation restrictions currently precent the port from being
enabled as part of the aggregation, and so the port is being held
in standby condition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
selected(1), unselected(2), standby(3) |
|
lacpInfoPortNtt |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.4.1.1.3 |
Need to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
true(1), false(2) |
|
lacpInfoPortReadyN |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.4.1.1.4 |
True value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
true(1), false(2) |
|
lacpInfoPortMoved |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.4.1.1.5 |
Port Moved flag is set to true if the receive machine for a port
is in the port_disabled state, and the combination of partner oper
system and partner oper port number in use by the port has been
used by received in an incoming LACPDU on a different port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
true(1), false(2) |
|
ufdCurCfgState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.1 |
Enable or disable UFD state |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
ufdNewCfgState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.2 |
Enable or disable UFD state |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
ufdCurCfgLtMPorts |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.3 |
The LtM port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtM
0 - The represented port does not belong to LtM |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
ufdNewCfgLtMPorts |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.4 |
The LtM port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtM
0 - The represented port does not belong to LtM |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
ufdCurCfgLtMTrunks |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.5 |
The LtM trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtM
0 - The represented trunk does not belong to LtM |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
ufdNewCfgLtMTrunks |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.6 |
The LtM trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtM
0 - The represented trunk does not belong to LtM |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
ufdCurCfgLtDPorts |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.7 |
The LtD port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtD
0 - The represented port does not belong to LtD |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
ufdNewCfgLtDPorts |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.8 |
The LtD port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtD
0 - The represented port does not belong to LtD |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
ufdCurCfgLtDTrunks |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.9 |
The LtD trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtD
0 - The represented trunk does not belong to LtD |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
ufdNewCfgLtDTrunks |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.10 |
The LtD trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtD
0 - The represented trunk does not belong to LtD |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
ufdNewCfgAddLtMPort |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.11 |
The port to be added to LtM. A '0' value is
returned when read. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ufdNewCfgRemoveLtMPort |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.12 |
The port to be removed from LtM. A '0'
value is returned when read. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ufdNewCfgAddLtMTrunk |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.13 |
The trunk to be added to LtM. A '0' value is
returned when read. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ufdNewCfgRemoveLtMTrunk |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.14 |
The trunk to be removed from LtM. A '0'
value is returned when read. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ufdNewCfgAddLtDPort |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.15 |
The port to be added to LtD. A '0' value is
returned when read. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ufdNewCfgRemoveLtDPort |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.16 |
The port to be removed from LtM. A '0'
value is returned when read. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ufdNewCfgAddLtDTrunk |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.17 |
The trunk to be added to LtM. A '0' value is
returned when read. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ufdNewCfgRemoveLtDTrunk |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.18 |
The trunk to be removed from LtD. A '0'
value is returned when read. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
ufdCurCfgGlobalState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.19 |
Current global Failover settings. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
ufdNewCfgGlobalState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.9.1.20 |
New global Failover settings. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
dot1xCurStatus |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.1 |
Dot1x status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(0), disable(1) |
|
dot1xNewStatus |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.2 |
Dot1x status |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(0), disable(1) |
|
dot1xCurCfgPortTable |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3 |
The table of 8021x configuration in the Current_config. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Dot1xCurCfgPortEntry |
|
dot1xCurCfgPortEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1 |
Information about 8021x Port Config |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Dot1xCurCfgPortEntry |
|
|
dot1xCurCfgPortIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.1 |
The 8021x Port number for which the table is related. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
dot1xCurCfgPortMode |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.2 |
Port authenticaton mode
forceUnauth(0),
auto(1),
forceAuth(2)
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
forceUnauth(0), auto(1), forceAuth(2) |
|
dot1xCurCfgPortQtPeriod |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.3 |
Quiet period (0-65535) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
dot1xCurCfgPortTxPeriod |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.4 |
Tx Period |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
dot1xCurCfgPortSupTmout |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.5 |
Supplicant timeout (1..65535) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
dot1xCurCfgPortSrvTmout |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.6 |
Server timeout (1..65535) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
dot1xCurCfgPortMaxRq |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.7 |
Maximum numer of requests (1..10) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..10 |
|
dot1xCurCfgPortRaPeriod |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.8 |
Reautentication period (0..604800) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..604800 |
|
dot1xCurCfgPortReAuth |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.3.1.9 |
ReAuthentication state
off(0),
on(1)
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(0), on(1) |
|
dot1xNewCfgPortEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1 |
Information about 8021x Port Config |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Dot1xNewCfgPortEntry |
|
|
dot1xNewCfgPortIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.1 |
The 8021x Port number for which the table is related. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
dot1xNewCfgPortMode |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.2 |
Port authentication mode
forceUnauth(0),
auto(1),
forceAuth(2) |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
forceUnauth(0), auto(1), forceAuth(2) |
|
dot1xNewCfgPortQtPeriod |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.3 |
Quiet period (0..65535) |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
dot1xNewCfgPortTxPeriod |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.4 |
Tx Period (1..65535) |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
dot1xNewCfgPortSupTmout |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.5 |
Supplicant Timeout (1..65535) |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
dot1xNewCfgPortSrvTmout |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.6 |
Server Timeout (1..65535) |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
dot1xNewCfgPortMaxRq |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.7 |
Maximum number of requests (1..10) |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..10 |
|
dot1xNewCfgPortRaPeriod |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.8 |
Reauthentication period (1..604800) |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..604800 |
|
dot1xNewCfgPortReAuth |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.9 |
Reauthentication state
off(0),
on(1) |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(0), on(1) |
|
dot1xNewCfgPortDefault |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.10 |
Port default settings |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(0), apply(1) |
|
dot1xNewCfgPortApplyGlobal |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.4.1.11 |
Apply Global config |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(0), apply(1) |
|
dot1xCurCfgGlobalMode |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.5.1 |
Autehtication Mode
forceUnauth(0),
auto(1),
forceAuth(2) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
forceUnauth(0), auto(1), forceAuth(2) |
|
dot1xCurCfgGlobalQtPeriod |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.5.2 |
Quiet period (0..65535) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
dot1xCurCfgGlobalTxPeriod |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.5.3 |
Tx period (1..65535) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
dot1xCurCfgGlobalSupTmout |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.5.4 |
Supplicant timeout (1..65535) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
dot1xCurCfgGlobalSrvTmout |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.5.5 |
Server timeout (1..65535) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
dot1xCurCfgGlobalMaxRq |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.5.6 |
Maximum number of requests (1..10) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..10 |
|
dot1xCurCfgGlobalRaPeriod |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.5.7 |
Reauthentication period (0..604800) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..604800 |
|
dot1xCurCfgGlobalReAuth |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.5.8 |
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(0), on(1) |
|
dot1xNewCfgGlobalMode |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.6.1 |
Authentication Mode |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
forceUnauth(0), auto(1), forceAuth(2) |
|
dot1xNewCfgGlobalQtPeriod |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.6.2 |
Quiet Period (0..65535) |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
dot1xNewCfgGlobalTxPeriod |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.6.3 |
Tx Period (1..65535) |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
dot1xNewCfgGlobalSupTmout |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.6.4 |
Supplicand timeout (1..65535) |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
dot1xNewCfgGlobalSrvTmout |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.6.5 |
Server timeout (1..65535) |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
dot1xNewCfgGlobalMaxRq |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.6.6 |
Maximum number of requests (1..10) |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..10 |
|
dot1xNewCfgGlobalRaPeriod |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.6.7 |
Reauthentication period (1..604800) |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..604800 |
|
dot1xNewCfgGlobalReAuth |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.11.6.8 |
Reauthentication status |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(0), on(1) |
|
dot1xInfoPortTable |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1 |
The table of 8021x configuration in the Current_config. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Dot1xInfoPortEntry |
|
dot1xInfoPortEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1.1 |
Information about 8021x Port Config |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Dot1xInfoPortEntry |
|
|
dot1xInfoPortIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1.1.1 |
The 8021x Port number for which the table is related. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
dot1xInfoPortAuthMode |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1.1.2 |
Authentication mode |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
forceUnauth(0), auto(1), forceAuth(2) |
|
dot1xInfoPortAuthStatus |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1.1.3 |
Authentication status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
authorized(0), unauthorized(1) |
|
dot1xInfoPortCtrlDir |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1.1.4 |
Controlled Directions |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
both(0), in(1) |
|
dot1xInfoPortAuthPAEState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1.1.5 |
Authenticator PAE State |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
initialize(0), disconnected(1), connecting(2), authenticating(3), authenticated(4), aborting(5), held(6), forceauth(7), forceunauth(8) |
|
dot1xInfoPortBackAuthState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.1.1.6 |
Backend authenticator PAE state |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
request(0), response(1), success(2), fail(3), timeout(4), idle(5), initialize(6) |
|
dot1xSystemCapability |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.2.1 |
System capability |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
authenticator(0), supplicant(1), authenticatorAndSupplicant(2), unknown(3) |
|
dot1xSystemStatus |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.2.2 |
System status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(0), disabled(1) |
|
dot1xSystemProtoVersion |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.5.2.3 |
Protocol version |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
fdbCurCfgAgingTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.1.1 |
Fdb current aging time |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fdbNewCfgAgingTime |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.1.2 |
Fdb new aging time. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fdbNewCfgStaticEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.2.1 |
A row in the fdb table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
FdbNewCfgStaticEntry |
|
|
fdbNewCfgEntryIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.2.1.1 |
The fdb entry index |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fdbNewCfgAddVlan |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.2.1.2 |
Add vlan for fdb entry index |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fdbNewCfgAddPort |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.2.1.3 |
The MAC address port number. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
fdbNewCfgAddMac |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.2.1.4 |
Add a fdb entry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
fdbNewCfgDelStaticEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.1.12.2.1.5 |
When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), delete(2) |
|
dot1pInfoPriorityCOSEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.1.1 |
Current information about 8021p priority to COS queue. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Dot1pInfoPriorityCOSEntry |
|
|
dot1pInfoPriorityIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.1.1.1 |
The 8021p priority for which the table is related. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
dot1pInfoPriorityCOSQueue |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.1.1.2 |
The 8021p priority COSq. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dot1pInfoPriorityCOSWeight |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.1.1.3 |
The 8021p priority weight. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dot1pInfoPortTable |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.2 |
The table of 8021p port priority configuration
in the Current_config. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Dot1pInfoPortEntry |
|
dot1pInfoPortEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.2.1 |
Information about 8021p Port Priority |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Dot1pInfoPortEntry |
|
|
dot1pInfoPortIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.2.1.1 |
The 8021p Port number for which the table is related. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
dot1pInfoPortPriority |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.2.1.2 |
The 8021p Port number for which the table is related. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dot1pInfoPortCOSq |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.2.1.3 |
The 8021p port COSq. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dot1pInfoPortWeight |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.6.2.1.4 |
The 8021p port weight. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
generalInfoStpUplinkFast |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.7.1 |
STP uplink fast mode |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
generalInfoUplinkFastRate |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.7.2 |
STP fast uplink rate. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vlanInfoTable |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.8.1 |
The table of VLAN information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VlanInfoTableEntry |
|
vlanInfoTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.8.1.1 |
Information about a particular VLAN. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VlanInfoTableEntry |
|
|
vlanInfoId |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.8.1.1.1 |
The VLAN identifier. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..4095 |
|
vlanInfoName |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.8.1.1.2 |
The VLAN name. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..32) |
|
vlanInfoStatus |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.8.1.1.3 |
Enable or disable, VLAN state information |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(2), disabled(3) |
|
vlanInfoPorts |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.8.1.1.4 |
The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
trunkGroupInfoTableEntry |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.9.1.1 |
A row in trunk group information table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TrunkGroupInfoTableEntry |
|
|
trunkGroupInfoIndex |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.9.1.1.1 |
The identifier of the trunk group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
trunkGroupInfoState |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.9.1.1.2 |
Trunk group state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
trunkGroupInfoPorts |
1.3.6.1.4.1.11.2.3.7.11.33.1.2.2.3.9.1.1.3 |
The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|