BRI-OPT-MIB

File: BRI-OPT-MIB.mib (89147 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

Counter Gauge enterprises
OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

Cdx6500PPCTBRIPortEntry  
SEQUENCE    
  cdx6500BRICfgPortNumber INTEGER
  cdx6500BRICfgPortType INTEGER
  cdx6500BRICfgSwitchType DisplayString
  cdx6500BRICfgVmebug INTEGER
  cdx6500BRICfgTEI INTEGER

Cdx6500PPCTBRIX25ChanEntry  
SEQUENCE    
  cdx6500BRIX25ChanCfgPortNumber INTEGER
  cdx6500BRIX25ChanCfgChannelNum INTEGER
  cdx6500BRIX25ChanCfgChannelType INTEGER
  cdx6500BRIX25ChanCfgAccessType INTEGER
  cdx6500BRIX25ChanCfgTimeslot INTEGER
  cdx6500BRIX25ChanCfgSPID DisplayString
  cdx6500BRIX25ChanCfgISDNCallAcc INTEGER
  cdx6500BRIX25ChanCfgLocalSubsAddr DisplayString
  cdx6500BRIX25ChanCfgLocalSubsSubAddr DisplayString
  cdx6500BRIX25ChanCfgRateAdaption INTEGER
  cdx6500BRIX25ChanCfgProtocolType INTEGER
  cdx6500BRIX25ChanCfgLinkAddr INTEGER
  cdx6500BRIX25ChanCfgNumPVCChannels INTEGER
  cdx6500BRIX25ChanCfgStartPVCChanNum INTEGER
  cdx6500BRIX25ChanCfgBNumSVCChannels INTEGER
  cdx6500BRIX25ChanCfgStartSVCChanNum INTEGER
  cdx6500BRIX25ChanCfgInitialFrame INTEGER
  cdx6500BRIX25ChanCfgT1TransRetryTimer INTEGER
  cdx6500BRIX25ChanCfgT4PollTimer INTEGER
  cdx6500BRIX25ChanCfgBN2TransTries INTEGER
  cdx6500BRIX25ChanCfgFrameSeqCount INTEGER
  cdx6500BRIX25ChanCfgBKFrameWindow INTEGER
  cdx6500BRIX25ChanCfgPktSeqCount INTEGER
  cdx6500BRIX25ChanCfgBWPktWindow INTEGER
  cdx6500BRIX25ChanCfgBPPktSize INTEGER
  cdx6500BRIX25ChanCfgMaxNegoPktSize INTEGER
  cdx6500BRIX25ChanCfgDataQUpperThres INTEGER
  cdx6500BRIX25ChanCfgDataQLowerThres INTEGER
  cdx6500BRIX25ChanCfgRestartTimer INTEGER
  cdx6500BRIX25ChanCfgResetTimer INTEGER
  cdx6500BRIX25ChanCfgCallTimer INTEGER
  cdx6500BRIX25ChanCfgClearTimer INTEGER
  cdx6500BRIX25ChanCfgFacToDelFromOutbCalls DisplayString
  cdx6500BRIX25ChanCfgFacToAddToOutbCalls DisplayString
  cdx6500BRIX25ChanCfgFacToBarInOutbCalls DisplayString
  cdx6500BRIX25ChanCfgFacToBarInInbCalls DisplayString
  cdx6500BRIX25ChanCfgX25Options DisplayString
  cdx6500BRIX25ChanCfgNumRoutDgtInCallUsrData INTEGER
  cdx6500BRIX25ChanCfgNumPreAddrDgstrpOutgCalls INTEGER
  cdx6500BRIX25ChanCfgInDigitsToStrip INTEGER
  cdx6500BRIX25ChanCfgRestrictedConnDest DisplayString
  cdx6500BRIX25ChanCfgPortAddress DisplayString
  cdx6500BRIX25ChanCfgCUGMembership DisplayString
  cdx6500BRIX25ChanCfgBillingRecords INTEGER
  cdx6500BRIX25ChanCfgSubAddrSize INTEGER
  cdx6500BRIX25ChanCfgCallSecurity INTEGER
  cdx6500BRIX25ChanCfgProtectionLevel INTEGER
  cdx6500BRIX25ChanCfgReconnTimeout INTEGER
  cdx6500BRIX25ChanCfgReconnTriesLt INTEGER
  cdx6500BRIX25ChanCfgFacSubsCtl DisplayString
  cdx6500BRIX25ChanCfgAlarmPriority INTEGER
  cdx6500BRIX25ChanCfgChanTEI INTEGER
  cdx6500BRIX25ChanCfgX25NetworkType INTEGER
  cdx6500BRIX25ChanCfgDNumSVCChannels INTEGER
  cdx6500BRIX25ChanCfgDWPktWindow INTEGER
  cdx6500BRIX25ChanCfgDPPktSize INTEGER
  cdx6500BRIX25ChanCfgDKFrameWindow INTEGER
  cdx6500BRIX25ChanCfgDN2TransTries INTEGER
  cdx6500BRIX25ChanCfgT1Timer INTEGER
  cdx6500BRIX25ChanCfgT2Timer INTEGER
  cdx6500BRIX25ChanCfgLinkType INTEGER
  cdx6500BRIX25ChanCfgAddrTrans DisplayString

Cdx6500BRIPStatsTableEntry  
SEQUENCE    
  cdx6500BRIPStatPortNumber INTEGER
  cdx6500BRIPStatPortType INTEGER
  cdx6500BRIPStatPortStatus DisplayString
  cdx6500BRIPStatNumConfigChannels INTEGER
  cdx6500BRIPStatSwitchType DisplayString
  cdx6500BRIPStatTEI INTEGER
  cdx6500BRIPStatLastStatsReset DisplayString
  cdx6500BRIPStatCharsInTot Counter
  cdx6500BRIPStatCharsInPerSec INTEGER
  cdx6500BRIPStatCharsOutTot Counter
  cdx6500BRIPStatCharsOutPerSec INTEGER
  cdx6500BRIPStatFramesInTot Counter
  cdx6500BRIPStatFramesInPerSec INTEGER
  cdx6500BRIPStatFrameOutTot Counter
  cdx6500BRIPStatFrameOutPerSec INTEGER
  cdx6500BRIPStatAvFrameSzIn INTEGER
  cdx6500BRIPStatAvFrameSzOut INTEGER
  cdx6500BRIPStatPortUtilIn INTEGER
  cdx6500BRIPStatPortUtilOut INTEGER
  cdx6500BRIPStatPortUtilInMax INTEGER
  cdx6500BRIPStatPortUtilOutMax INTEGER

Cdx6500BRIChanStatsTableEntry  
SEQUENCE    
  cdx6500BRICStatsPortNumber INTEGER
  cdx6500BRICStatsChannelNum INTEGER
  cdx6500BRICStatsChannelType DisplayString
  cdx6500BRICStatsAccessType DisplayString
  cdx6500BRICStatsProtocolType DisplayString
  cdx6500BRICStatsCallState DisplayString
  cdx6500BRICStatsChannelStatus DisplayString
  cdx6500BRICStatsInCurCallAddr DisplayString
  cdx6500BRICStatsInCurCallSubAddr DisplayString
  cdx6500BRICStatsInAvConnTm DisplayString
  cdx6500BRICStatsInCurConnTm DisplayString
  cdx6500BRICStatsInMinConnTm DisplayString
  cdx6500BRICStatsInMaxConnTm DisplayString
  cdx6500BRICStatsInNumSuccCalls INTEGER
  cdx6500BRICStatsInNumFailCalls INTEGER
  cdx6500BRICStatsOutCurCallAddr DisplayString
  cdx6500BRICStatsOutCurCallSubAddr DisplayString
  cdx6500BRICStatsOutAvConnTm DisplayString
  cdx6500BRICStatsOutCurConnTm DisplayString
  cdx6500BRICStatsOutMinConnTm DisplayString
  cdx6500BRICStatsOutMaxConnTm DisplayString
  cdx6500BRICStatsOutNumSuccCalls INTEGER
  cdx6500BRICStatsOutNumFailCalls INTEGER
  cdx6500BRICStatsMaxSVC INTEGER
  cdx6500BRICStatsMaxPVC INTEGER
  cdx6500BRICStatsCurSVC INTEGER
  cdx6500BRICStatsCurPVC INTEGER
  cdx6500BRICStatsLastRepReasonCodes DisplayString
  cdx6500BRICStatsLastStatsReset DisplayString
  cdx6500BRICStatsCharsInTot Counter
  cdx6500BRICStatsCharsOutTot Counter
  cdx6500BRICStatsCharsInPerSec INTEGER
  cdx6500BRICStatsCharsOutPerSec INTEGER
  cdx6500BRICStatsPktsInTot Counter
  cdx6500BRICStatsPktsOutTot Counter
  cdx6500BRICStatsPktsInPerSec INTEGER
  cdx6500BRICStatsPktsOutPerSec INTEGER
  cdx6500BRICStatsFramesInTot Counter
  cdx6500BRICStatsFramesOutTot Counter
  cdx6500BRICStatsFramesInPerSec INTEGER
  cdx6500BRICStatsFramesOutPerSec INTEGER
  cdx6500BRICStatsInfoFramesIn Counter
  cdx6500BRICStatsInfoFramesOut Counter
  cdx6500BRICStatsRNRFramesIn Counter
  cdx6500BRICStatsRNRFramesOut Counter
  cdx6500BRICStatsSABMFramesIn Counter
  cdx6500BRICStatsSABMFramesOut Counter
  cdx6500BRICStatsDMFramesIn Counter
  cdx6500BRICStatsDMFramesOut Counter
  cdx6500BRICStatsRRFramesIn Counter
  cdx6500BRICStatsRRFramesOut Counter
  cdx6500BRICStatsREJFramesIn Counter
  cdx6500BRICStatsREJFramesOut Counter
  cdx6500BRICStatsDISCFramesIn Counter
  cdx6500BRICStatsDISCFramesOut Counter
  cdx6500BRICStatsUAFramesIn Counter
  cdx6500BRICStatsUAFramesOut Counter
  cdx6500BRICStatsFRMRFramesIn Counter
  cdx6500BRICStatsFRMRFramesOut Counter
  cdx6500BRICStatsDataPktsIn Counter
  cdx6500BRICStatsDataPktsOut Counter
  cdx6500BRICStatsRRPktsIn Counter
  cdx6500BRICStatsRRPktsOut Counter
  cdx6500BRICStatsRNRPktsIn Counter
  cdx6500BRICStatsRNRPktsOut Counter
  cdx6500BRICStatsRejPktsIn Counter
  cdx6500BRICStatsRejPktsOut Counter
  cdx6500BRICStatsCallReqPktsIn Counter
  cdx6500BRICStatsCallReqPktsOut Counter
  cdx6500BRICStatsCallAccPktsIn Counter
  cdx6500BRICStatsCallAccPktsOut Counter
  cdx6500BRICStatsClrReqPktsIn Counter
  cdx6500BRICStatsClrReqPktsOut Counter
  cdx6500BRICStatsClrConfPktsIn Counter
  cdx6500BRICStatsClrConfPktsOut Counter
  cdx6500BRICStatsIntReqPktsIn Counter
  cdx6500BRICStatsIntReqPktsOut Counter
  cdx6500BRICStatsIntConfPktsIn Counter
  cdx6500BRICStatsIntConfPktsOut Counter
  cdx6500BRICStatsRstReqPktsIn Counter
  cdx6500BRICStatsRstReqPktsOut Counter
  cdx6500BRICStatsRstConfPktsIn Counter
  cdx6500BRICStatsRstConfPktsOut Counter
  cdx6500BRICStatsRestartReqPktsIn Counter
  cdx6500BRICStatsRestartReqPktsOut Counter
  cdx6500BRICStatsRestartConfPktsIn Counter
  cdx6500BRICStatsRestartConfPktsOut Counter
  cdx6500BRICStatsTEI INTEGER
  cdx6500BRICStatsSAPI INTEGER
  cdx6500BRICStatsNetworkType DisplayString

Defined Values

codex 1.3.6.1.4.1.449
OBJECT IDENTIFIER    

cdxProductSpecific 1.3.6.1.4.1.449.2
OBJECT IDENTIFIER    

cdx6500 1.3.6.1.4.1.449.2.1
OBJECT IDENTIFIER    

cdx6500Configuration 1.3.6.1.4.1.449.2.1.2
OBJECT IDENTIFIER    

cdx6500CfgProtocolGroup 1.3.6.1.4.1.449.2.1.2.1
OBJECT IDENTIFIER    

cdx6500PCTPortProtocolGroup 1.3.6.1.4.1.449.2.1.2.1.1
OBJECT IDENTIFIER    

cdx6500Statistics 1.3.6.1.4.1.449.2.1.3
OBJECT IDENTIFIER    

cdx6500StatProtocolGroup 1.3.6.1.4.1.449.2.1.3.1
OBJECT IDENTIFIER    

cdx6500PSTPortProtocolGroup 1.3.6.1.4.1.449.2.1.3.1.1
OBJECT IDENTIFIER    

cdx6500PPCTISDN 1.3.6.1.4.1.449.2.1.2.1.1.26
OBJECT IDENTIFIER    

cdx6500PPCTBRIConfig 1.3.6.1.4.1.449.2.1.2.1.1.26.1
OBJECT IDENTIFIER    

cdx6500PPCTBRIPortTable 1.3.6.1.4.1.449.2.1.2.1.1.26.1.1
This table contains BRI Port configuration parameters
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500PPCTBRIPortEntry

cdx6500PPCTBRIPortEntry 1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1
Each PortEntry contains the configuration parameters for one BRI ISDN port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500PPCTBRIPortEntry  

cdx6500BRICfgPortNumber 1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1.1
Port number of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICfgPortType 1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1.2
The Port Type of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bri(40)  

cdx6500BRICfgSwitchType 1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1.3
Specifies switch type for the central office. VN4 - French VN4 standard 1TR6 - German switch standard BTNR - UK Standard ETSI - Euro-ISDN 5ESS - AT&T switch NI-1 - National ISDN version 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..24)  

cdx6500BRICfgVmebug 1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1.4
Engineering use only. Enable/disable the running of the OST VMEBUG debugger. NOTE: For this to work the flash must be loaded with the dbg_vmebug file. If the the dbg_vmebug file is not in flash this parameter will have no effect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

cdx6500BRICfgTEI 1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1.5
The range is 0..63,127. The range 0..63 indicate a static TEI provided by the Network subscribing. 127: TEI negotiated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500PPCTBRIChan 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2
OBJECT IDENTIFIER    

cdx6500PPCTBRIX25ChanTable 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1
This table contains BRI Channel configuration parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500PPCTBRIX25ChanEntry

cdx6500PPCTBRIX25ChanEntry 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1
Each ChanEntry contains the configuration parameters for one BRI ISDN channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500PPCTBRIX25ChanEntry  

cdx6500BRIX25ChanCfgPortNumber 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.1
The BRI port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRIX25ChanCfgChannelNum 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.2
Configured ISDN Channel Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

cdx6500BRIX25ChanCfgChannelType 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.3
ISDN channel type. bChannel - a full duplex, 56 or 64 Kbps channel. dChannel - a full duplex, 16 Kbps channel configured only for packet mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bChannel(3), dChannel(4)  

cdx6500BRIX25ChanCfgAccessType 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.4
permanent : Permanent BRI channels switched : Switched BRI channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER permanent(1), switched(2)  

cdx6500BRIX25ChanCfgTimeslot 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.5
Physical channel number for permanent switch type only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRIX25ChanCfgSPID 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.6
Service Profile Identifiers (SPID) is to define the services subscribed to by the ISDN device that is accessing the ISDN provider. This value is provided by your service provider.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..21)  

cdx6500BRIX25ChanCfgISDNCallAcc 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.7
Specifies the ISDN routing for a setup message coming from the network. allCalls : ISDN routing for all setup message coming from the network. addressOnly : ISDN routing for specified address only. addressSubaddress : ISDN routing for specified subaddress only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER allCalls(2), addressOnly(3), addressSubaddress(5)  

cdx6500BRIX25ChanCfgLocalSubsAddr 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.8
Specifies the local subscriber address which is provided by the service provider.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..36)  

cdx6500BRIX25ChanCfgLocalSubsSubAddr 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.9
Specifies the local subscriber subaddress which is provided by the service provider.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

cdx6500BRIX25ChanCfgRateAdaption 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.10
Rate adaption parameter for this channel. rate56k : Rate of 56 K rate64k : Rate of 64 K.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rate56k(1), rate64k(2)  

cdx6500BRIX25ChanCfgProtocolType 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.11
Specifies the protocol type run over ISDN B channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x25(2), fri(3)  

cdx6500BRIX25ChanCfgLinkAddr 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.12
The logical link address must be set to complementary values in devices at each end of the link: dte - link to have logical DTE address (A) dce - link to have logical DCE address (B)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dte(1), dce(2)  

cdx6500BRIX25ChanCfgNumPVCChannels 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.13
Number of logical channels used for Permanent Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consistent with needs. PVC connections must be configured in the PVC Table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

cdx6500BRIX25ChanCfgStartPVCChanNum 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.14
This is the starting logical channel number for the Permanent Virtual Circuits on this link. Not used if the number of PVCs = 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4095  

cdx6500BRIX25ChanCfgBNumSVCChannels 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.15
Number of logical channels used in Switched Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consistent with needs. This is a B-channel object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..512  

cdx6500BRIX25ChanCfgStartSVCChanNum 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.16
This is the starting logical channel number for the Switched Virtual Circuits on this link. Not used if the number of SVCs = 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4095  

cdx6500BRIX25ChanCfgInitialFrame 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.17
Specify the initial frame required by other end for link startup: none - do nothing (other end initiates link-up) sabm - send SABM disc - send DISC, then SABM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER sabm(1), disc(2), none(3)  

cdx6500BRIX25ChanCfgT1TransRetryTimer 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.18
T1 link retry timer value in tenths of a second (e.g. 30 = 3.0 seconds).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

cdx6500BRIX25ChanCfgT4PollTimer 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.19
This sets the time an idle link is probed for assurance of connection to the remote device. 0 - disable the timer X - X is in tenths of a second (e.g. 40 = 4.0 seconds) and must be set greater than T1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRIX25ChanCfgBN2TransTries 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.20
The maximum number of attempts allowed to complete a transmission. This is a B channel object
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..20  

cdx6500BRIX25ChanCfgFrameSeqCount 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.21
Port uses normal or extended frame sequence numbering: norm - normal sequencing (modulo 8) ext - extended sequencing (modulo 128)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER norm(1), ext(2)  

cdx6500BRIX25ChanCfgBKFrameWindow 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.22
Frame level window size must be set to the same value in devices at each end of the link. This is a B-channel object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

cdx6500BRIX25ChanCfgPktSeqCount 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.23
Port uses normal or extended packet level sequence numbers norm - normal sequencing (Modulo 8) ext - extended sequencing (Modulo 128) The value must be the same in devices at each end of the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER norm(1), ext(2)  

cdx6500BRIX25ChanCfgBWPktWindow 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.24
Packet level window size must be set to the same value in devices at each end of the link. This is a B-channel object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

cdx6500BRIX25ChanCfgBPPktSize 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.25
This is the maximum packet size used on X.25 links. For proper operation, the size must be the same in devices at each end of the link. This is a B-channel object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER s128(8), s256(9), s512(10), s1024(11)  

cdx6500BRIX25ChanCfgMaxNegoPktSize 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.26
This is the maximum negotiated packet size allowed for inbound and outbound calls on this X.25 link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER s128(8), s256(9), s512(10), s1024(11)  

cdx6500BRIX25ChanCfgDataQUpperThres 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.27
This is the maximum number of data packets a channel on this port will queue for transmission before invoking flow control to the attached channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 5..15  

cdx6500BRIX25ChanCfgDataQLowerThres 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.28
This is the number of data packets a channel on this port will have queued for transmission when it releases flow control to the attached channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

cdx6500BRIX25ChanCfgRestartTimer 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.29
Restart-Request timeout timer in seconds. If timer expires, request is sent again.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 5..255  

cdx6500BRIX25ChanCfgResetTimer 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.30
Reset-Request timeout timer in seconds. If timer expires, request is sent again.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 5..255  

cdx6500BRIX25ChanCfgCallTimer 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.31
Call-Request timeout timer in seconds. If timer expires, call is cleared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 5..255  

cdx6500BRIX25ChanCfgClearTimer 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.32
Clear-Request timeout timer in seconds. If timer expires, request is sent again.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 5..255  

cdx6500BRIX25ChanCfgFacToDelFromOutbCalls 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.33
Specify facilities deleted from an outbound call before it is forwarded: NONE - no facilities deleted THRO - delete throughput class negotiation NUI - delete network user identification CUG - delete closed user group Any combination of above specified by summing (e.g. THRO+NUI. . .).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(3..17)  

cdx6500BRIX25ChanCfgFacToAddToOutbCalls 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.34
Specify facilities added to an outbound call before it is forwarded: NONE - no facilities added REV - add reverse charging PACK - add packet size negotiation WIND - add window size negotiation Any combination of above specified by summing (e.g. PACK+WIND+. . .).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(3..18)  

cdx6500BRIX25ChanCfgFacToBarInOutbCalls 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.35
Specify facilities which, if present in an outbound call, will be blocked by the port: NONE - no facility blocked REV - bar reverse charging FAST - bar fast select BCUG - bar Bilateral Closed User Group DGRAM - bar datagram Any combination of above specified by summing (e.g. REV+FAST).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(3..24)  

cdx6500BRIX25ChanCfgFacToBarInInbCalls 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.36
Specify facilities which, if present in an inbound call, will be blocked by the port: NONE - no facility blocked BCUG - bar Bilateral Closed User Group DGRAM - bar datagram REV - bar Reverse Charging Any combination of above specified by summing (e.g. DGRAM+BCUG).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(3..19)  

cdx6500BRIX25ChanCfgX25Options 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.37
Select X.25 options as follows: NONE - no option specified 1980 - use X.25 1980 NUI - perform network user identification validation check PDN - connected to Public Data Network CUD - use call user data subaddressing IBAR - bar all calls coming in from X.25 port user OBAR - bar all calls going out to X.25 port user CBCK - allow routing inbound calls back out this port CUG - check closed user group; otherwise, CUG passes transparently CAUSE - pass cause, diagnostic, code in outbound packets HOLD - hold calls over link restart NRST - do not send restart packet on link-up BKUP - this is a backup port to be activated if other ports are down INL - inter-node link. Link goes to another 6500 device INLA - set with INL option when an X.25 link connection is to a 6500 node using 2.12.04 or earlier DELAY - Enable Delay and Path Trace on this link (link must be connected to Rel. 4.xx node) Any combination of above specified by summing (e.g. 1980+NUI+. . .).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(3..107)  

cdx6500BRIX25ChanCfgNumRoutDgtInCallUsrData 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.38
This specifies the number of routing digits in the call user data. It is used on X.25 links attached to a Public Data Network where the private network address is carried in the call user data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..12  

cdx6500BRIX25ChanCfgNumPreAddrDgstrpOutgCalls 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.39
For X.25 links connected to a Public Data Network, this parameter specifies the number of prefix digits to remove from the called address before forwarding the call to the PDN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..14  

cdx6500BRIX25ChanCfgInDigitsToStrip 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.40
For X.25 links connected to a Public Data Network, this parameter specifies the number of prefix digits to remove from the incoming calling address before forwarding the call from the PDN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

cdx6500BRIX25ChanCfgRestrictedConnDest 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.41
All calls entering this port will be routed to the destination specified in this parameter, irrespective of route selection table entries. For example, to route all calls to X.25 port 3, use X25-3. To route calls to SDLC port 2, station 4, use SDLC-2S4. Function is disabled for blank field.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

cdx6500BRIX25ChanCfgPortAddress 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.42
On X.25 links: If the X.25 Option REGO, REGSO or REGI is selected, this address is inserted into the calling address field of the outbound or inbound call packet. On MUX links: When a MUX channel makes a call, the subaddress of the channel is appended to this address and inserted into the calling address field of the call packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

cdx6500BRIX25ChanCfgCUGMembership 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.43
The port may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except double dash) and separated by a comma. ( e.g. 12,34,56,09,02,03 ). -- - No CUG Membership 00-99 - CUG Membership
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..23)  

cdx6500BRIX25ChanCfgBillingRecords 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.44
This controls whether billing (accounting) records will be created for calls on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

cdx6500BRIX25ChanCfgSubAddrSize 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.45
For ports connected to a Public Data Network, this parameter specifies the number of digits in the subaddress of an X.25 address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

cdx6500BRIX25ChanCfgCallSecurity 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.46
For ports used as V.25 bis or SW56K backup, this parameter specifies the type of call security to use prior to the link being detected up. disable - Disable will allow both incoming and outgoing calls. enable - Enable will allow ONLY outgoing calls. Incoming calls will be immediately terminated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

cdx6500BRIX25ChanCfgProtectionLevel 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.47
This specifies the level of data or connection protection which will be applied to calls to or from this port. The actual level for a call will be negotiated to the lesser of this level and the level configured for the other end of the call. none - No protection cpOnly - Connection protection only fullDcp - Full data and connection protection
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), cpOnly(2), fullDcp(3)  

cdx6500BRIX25ChanCfgReconnTimeout 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.48
This specifies the number of seconds that DCP on the originating side will wait between reconnection attempts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..128  

cdx6500BRIX25ChanCfgReconnTriesLt 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.49
This specifies the number of times that DCP on the originating side will attempt to reconnect before clearing the call. For0, it will not attempt to reconnect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..127  

cdx6500BRIX25ChanCfgFacSubsCtl 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.50
NONE - Subscription to facilities not enforced. FCN_ON - Flow Control Negotiation enabled. Packet and Window size negotiation facilities in an inbound call will be allowed. Packet and Window size facilities will always be included in outbound calls and call accepted/ connected when this parameter is set. FCN_OFF - Flow Control Negotiation disabled. Inbound calls containing Packet and Window size facilities will be cleared. Packet and Window size facilities will not be present in outbound calls and call accepted/connected when this parameter is set. TCN_ON - Throughput Class Negotiation enabled. The throughput class negotiation facility in an inbound call will be allowed. The throughput class negotiation facility will always be included in outbound calls and call accepted/connected when this parameter is set. The facility is passed onward to the destination in the call packet transparently and does not alter the handling of the SVC data within the node. TCN_OFF - Throughput Class Negotiation disabled. Inbound calls containing the throughput class negotiation facility will be cleared. The throughput class negotiation facility will not be present in outbound calls and call accepted/connected when this parameter is set. Some combinations of above options are allowed (e.g. FCNON+TCNON)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRIX25ChanCfgAlarmPriority 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.51
Specify the severity level of LINK UP and LINK DOWN alarms: network - Severity HIGH alarms will be generated access - Severity LOW alarms will be generated
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER network(1), access(2)  

cdx6500BRIX25ChanCfgChanTEI 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.52
Terminal Endpoint Identifier. Value is provided by the service provider.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..63  

cdx6500BRIX25ChanCfgX25NetworkType 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.53
Specifies the X.25 Network Type: Transpac, PSS, Datanet, Telenet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER transpac(1), telenet(2), pss(3), datanet(4)  

cdx6500BRIX25ChanCfgDNumSVCChannels 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.54
Specifies the number of logical SVC channels on this port. This is a D-channel object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

cdx6500BRIX25ChanCfgDWPktWindow 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.55
Specifies the default packet level window size when it is not negotiated for the individual call. The value must be the same for both ends of the link. This is a D-channel object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7  

cdx6500BRIX25ChanCfgDPPktSize 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.56
Specifies the maximum default packet size (in bytes) for inbound and outbound calls on the link. The value must be the same for both ends of the link. This is a D-channel object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER psize32(6), psize64(7), psize128(8), psize256(9)  

cdx6500BRIX25ChanCfgDKFrameWindow 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.57
Specifies the number of unacknowledged frames that can be outstanding. When there is a high link delay, set this parameter to a high value to improve throughput. The setting for this parameter should be the same for the devices on both ends of the link. This is a D-channel object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7  

cdx6500BRIX25ChanCfgDN2TransTries 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.58
Specifies the maximum number of times a frame is resent before disconnect. This is a D-channel object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..254  

cdx6500BRIX25ChanCfgT1Timer 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.59
Sets the T1 Retry Timer. The values are in tenths of a second. (30 = 3.0 seconds)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16383  

cdx6500BRIX25ChanCfgT2Timer 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.60
Sets the T2 timer. The values are in tenths of a second. (40 = 4.0 seconds)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16383  

cdx6500BRIX25ChanCfgLinkType 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.61
Engineering use only. Sets the link type: dChannel - Run over the D channel v24Dte - DTE on the V.24 port v24Dce - DCE on the V.24 port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dChannel(1), v24Dte(2), v24Dce(3)  

cdx6500BRIX25ChanCfgAddrTrans 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.62
Select any of the following address translation options NONE - no option specified Outbound Call Processing: DEDO - delete called address DEGO - delete calling address REGO - replace calling address with configured Port Address REGSO - replace calling address with configured Port Address plus Inbound Subaddress obtained from the Inbound Call Translation Table entry where Private Network Address matches the entire calling address INGO - replace calling address with configured Port Address and retain original calling subaddress SAGO - strip calling address, but retain subaddress Inbound Call Processing: INGI - replace calling address with configured Port Address and retain original calling subaddress REGI - replace calling address with configured Port Address SRGI - select route from the Calling Address Translation Table by replacing the called address with the Private Network Address where the Inbound Calling Address matches the beginning of the calling address Call Accept Processing: DADA - delete called address in inbound/outbound call accept DAGA - delete calling address in inbound/outbound call accept IADD - copy called and calling addresses from call request into outbound call accepted/connected Some of the options may be combined (e.g. DEDO + DEGO).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(3..107)  

cdx6500BRIStats 1.3.6.1.4.1.449.2.1.3.1.1.27
OBJECT IDENTIFIER    

cdx6500BRIPStatsTable 1.3.6.1.4.1.449.2.1.3.1.1.27.1
A table of BRI port statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500BRIPStatsTableEntry

cdx6500BRIPStatsTableEntry 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1
Each entry contains the statistics for a single BRI port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500BRIPStatsTableEntry  

cdx6500BRIPStatPortNumber 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.1
The port number of the BRI port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRIPStatPortType 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.2
The Port Type of the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bri(40)  

cdx6500BRIPStatPortStatus 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.3
Status of this port : Enabled - Port is enabled Disabled - Port is disabled Busyout - Port has been busied out Unknown - Port not recognized Init Failed - Port initialization failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(2..8)  

cdx6500BRIPStatNumConfigChannels 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.4
The number of configured channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

cdx6500BRIPStatSwitchType 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.5
Specifies switch type for the central office. VN4 : French VN4 standard 1TR6 : German switch standard BTNR : UK Standard ETSI : Euro-ISDN 5ESS : AT&T switch NI-1 : National ISDN version 1
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..23)  

cdx6500BRIPStatTEI 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.6
Terminal Endpoint Identifier. The range of values [0 - 63] indicate a static TEI provided by the Network subscribing. 127: TEI negotiated
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRIPStatLastStatsReset 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.7
Time when the statistics were last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRIPStatCharsInTot 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.8
Number of characters received since last node, port or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRIPStatCharsInPerSec 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.9
Average number of characters received per second since last node, port or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRIPStatCharsOutTot 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.10
Number of characters sent since last node, port or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRIPStatCharsOutPerSec 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.11
Average number of characters sent per second since last node, port or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRIPStatFramesInTot 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.12
Number of frames received since last node, port or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRIPStatFramesInPerSec 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.13
Average number of Frames received per second since last node, port or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRIPStatFrameOutTot 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.14
Number of frames sent since last node, port or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRIPStatFrameOutPerSec 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.15
Average number of Frames sent per second since last node, port or statistics reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRIPStatAvFrameSzIn 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.16
Average size of the frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRIPStatAvFrameSzOut 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.17
Average size of the frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRIPStatPortUtilIn 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.18
Current inbound port utilization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRIPStatPortUtilOut 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.19
Current outbound port utilization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRIPStatPortUtilInMax 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.20
Maximum inbound port utilization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRIPStatPortUtilOutMax 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.21
Maximum outbound port utilization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRIChanStatsTable 1.3.6.1.4.1.449.2.1.3.1.1.27.2
A table of BRI channel statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500BRIChanStatsTableEntry

cdx6500BRIChanStatsTableEntry 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1
Each entry contains the statistics for a single channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Cdx6500BRIChanStatsTableEntry  

cdx6500BRICStatsPortNumber 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.1
The BRI port number associated with the channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsChannelNum 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.2
The ISDN channel Number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

cdx6500BRICStatsChannelType 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.3
ISDN channel type. B Channel : a full duplex, 56 or 64 Kbps channel. D Channel : a full duplex, 16 Kbps channel configured only for packet mode. Unknown : unknown channel type .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsAccessType 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.4
Switched BRI channel type. Permanent channel type : not supported in this version Unknown : unknown access type .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsProtocolType 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.5
Specifies the protocol type such as X25, FRI. `Unknown' indicates unknown protocol type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsCallState 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.6
Call State: Disconnected - Call in Idle state Ringing - Trying to establish connection Connected - Call connected Disabled - Call disabled Congested - not supported Unknown - unknown state .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsChannelStatus 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.7
Disabled - Channel disabled. Enabled - Channel enabled. Busyout - Channel busyout Unknown - unknown status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsInCurCallAddr 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.8
The address for the current inbound ISDN call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsInCurCallSubAddr 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.9
The subaddress for the current ISDN call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsInAvConnTm 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.10
Average connection time for an inbound ISDN call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsInCurConnTm 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.11
Current connection time for an inbound ISDN call. current time - Time connection started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsInMinConnTm 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.12
Minimum connection time for an inbound ISDN call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsInMaxConnTm 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.13
Maximum connection time for an inbound ISDN call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsInNumSuccCalls 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.14
Total number of successful inbound calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsInNumFailCalls 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.15
Total number of unsuccessful inbound calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsOutCurCallAddr 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.16
The address of the current ISDN outbound call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsOutCurCallSubAddr 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.17
The subaddress of the current ISDN outbound call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsOutAvConnTm 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.18
Average connection time for an outbound call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsOutCurConnTm 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.19
Current connection time for an outbound call. Current time - Time connection started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsOutMinConnTm 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.20
Minimum connection time for an outbound call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsOutMaxConnTm 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.21
Maximum connection time for an outbound call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsOutNumSuccCalls 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.22
Total number of successful outbound calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsOutNumFailCalls 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.23
Total number of unsuccessful outbound calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsMaxSVC 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.24
Maximum number of async Switched Virtual Circuit channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsMaxPVC 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.25
Maximum number of async Permanent Virtual Circuit channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsCurSVC 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.26
Current number of async Switched Virtual Circuit channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsCurPVC 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.27
Current number of async Permament Virtual Circuit channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsLastRepReasonCodes 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.28
Last Reason codes returned from the network and Last Return code from Transparent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsLastStatsReset 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.29
Time when the node restarted or the stats reset by CTP command .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

cdx6500BRICStatsCharsInTot 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.30
Number of characters received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsCharsOutTot 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.31
Number of characters sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsCharsInPerSec 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.32
Average number of characters received per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsCharsOutPerSec 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.33
Average number of characters sent per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsPktsInTot 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.34
Number of packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsPktsOutTot 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.35
Number of packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsPktsInPerSec 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.36
Average number of packets received per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsPktsOutPerSec 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.37
Average number of packets sent per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsFramesInTot 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.38
Total number of frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsFramesOutTot 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.39
Total number of frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsFramesInPerSec 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.40
Average number of frames received per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsFramesOutPerSec 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.41
Average number of frames sent per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsInfoFramesIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.42
Number of Information frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsInfoFramesOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.43
Number of Information frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRNRFramesIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.44
Number of Receiver Not Ready (RNR) frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRNRFramesOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.45
Number of Receiver Not Ready (RNR) frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsSABMFramesIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.46
Number of Set Asynchronous Balanced Mode (SABM) frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsSABMFramesOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.47
Number of Set Asynchronous Balanced Mode (SABM) frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsDMFramesIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.48
Number of Disconnect Mode (DM) frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsDMFramesOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.49
Number of Disconnect Mode (DM) frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRRFramesIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.50
Number of Receiver Ready (RR) frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRRFramesOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.51
Number of Receiver Ready (RR) frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsREJFramesIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.52
Number of Reject (REJ) frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsREJFramesOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.53
Number of Reject (REJ) frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsDISCFramesIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.54
Number of Disconnect (DISC) frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsDISCFramesOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.55
Number of Disconnect (DISC) frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsUAFramesIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.56
Number of Unnumbered Acknowledgement (UA) frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsUAFramesOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.57
Number of Unnumbered Acknowledgement (UA) frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsFRMRFramesIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.58
Number of Frame Reject (FRMR) frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsFRMRFramesOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.59
Number of Frame Reject (FRMR) frames sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsDataPktsIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.60
Total Number of Data packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsDataPktsOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.61
Total Number of Data packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRRPktsIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.62
Total Number of Receiver Ready (RR) packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRRPktsOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.63
Total Number of Receiver Ready (RR) packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRNRPktsIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.64
Total Number of Receiver Not Ready (RNR) packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRNRPktsOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.65
Total Number of Receiver Not Ready (RNR) packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRejPktsIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.66
Total Number of Reject packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRejPktsOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.67
Total Number of Reject packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsCallReqPktsIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.68
Total Number of Call Request packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsCallReqPktsOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.69
Total Number of Call Request packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsCallAccPktsIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.70
Total Number of Call Accept packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsCallAccPktsOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.71
Total Number of Call Acceptt packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsClrReqPktsIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.72
Total Number of Clear Request packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsClrReqPktsOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.73
Total Number of Clear Request packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsClrConfPktsIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.74
Total Number of Clear Confirmation packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsClrConfPktsOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.75
Total Number of Clear Confirmation packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsIntReqPktsIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.76
Total Number of Interrupt Request packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsIntReqPktsOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.77
Total Number of Interrupt Request packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsIntConfPktsIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.78
Total Number of Interrupt Confirmation packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsIntConfPktsOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.79
Total Number of Interrupt Confirmation packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRstReqPktsIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.80
Total Number of Reset Request packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRstReqPktsOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.81
Total Number of Reset Request packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRstConfPktsIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.82
Total Number of Reset Confirmation packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRstConfPktsOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.83
Total Number of Reset Confirmation packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRestartReqPktsIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.84
Total Number of Restart Request packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRestartReqPktsOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.85
Total Number of Restart Request packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRestartConfPktsIn 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.86
Total Number of Restart Confirmation packets received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsRestartConfPktsOut 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.87
Total Number of Restart Confirmation packets sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

cdx6500BRICStatsTEI 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.88
Terminal Endpoint Identifier provided by the Network subscribing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsSAPI 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.89
Service Access Point Identifier. A value of 16 is reserved for Packet-mode communication on the D-channel using X.25 level 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

cdx6500BRICStatsNetworkType 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.90
Specifies the X.25 Network Type: Transpac, PSS, Datanet, Telenet, Unknown .
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString