BROTHER-MIB

File: BROTHER-MIB.mib (290458 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB SNMPv2-TC
RFC-1212 IPV6-TC

Imported symbols

enterprises IpAddress Counter
DisplayString DateAndTime OBJECT-TYPE
Ipv6Address

Defined Types

BrOneTouchDialEntry  
SEQUENCE    
  brOneTouchDialIndex INTEGER
  brOneTouchDialData OCTET STRING

BrSpeedDialEntry  
SEQUENCE    
  brSpeedDialIndex INTEGER
  brSpeedDialData OCTET STRING

BrTrayPriorityEntry  
SEQUENCE    
  brTrayPriorityIndex INTEGER
  brTrayPriorityMember OCTET STRING

BrCarbonCopyEntry  
SEQUENCE    
  brCarbonCopyIndex INTEGER
  brCarbonCopyTray INTEGER
  brCarbonCopyMacro INTEGER
  brCarbonCopyMacroID INTEGER

BrPrtMailboxProtectEntry  
SEQUENCE    
  brPrtMailboxProtectIndex INTEGER
  brPrtMailboxProtect INTEGER

BrPrtAvoidMailboxFullEntry  
SEQUENCE    
  brPrtAvoidMailboxFullIndex INTEGER
  brPrtAvoidMailboxFull INTEGER

BrErrorHistoryEntry  
SEQUENCE    
  brErrorHistoryIndex INTEGER
  brErrorHistoryDescription OCTET STRING

BrCommunicationErrorHistoryEntry  
SEQUENCE    
  brCommunicationErrorHistoryIndex INTEGER
  brCommunicationErrorHistoryDescription OCTET STRING

BrPrintPagesEntry  
SEQUENCE    
  brPrintPagesIndex INTEGER
  brPrintPagesPaperSize INTEGER
  brPrintPages Counter

BrPrintPagesMediaPlaceEntry  
SEQUENCE    
  brPrintPagesMediaPlaceIndex INTEGER
  brPrintPagesMediaPlaceType INTEGER
  brPrintPagesMediaPlaceCounter Counter

BrPrintPagesFuncEntry  
SEQUENCE    
  brPrintPagesFuncIndex INTEGER
  brPrintPagesFuncType INTEGER
  brPrintPagesFuncCounter Counter

BrPrintPagesPaperTypeEntry  
SEQUENCE    
  brPrintPagesPaperTypeIndex INTEGER
  brPrintPagesPaperTypeType INTEGER
  brPrintPagesPaperTypeCounter Counter

BrCapabilityOrientationEntry  
SEQUENCE    
  brCapabilityOrientationIndex INTEGER
  brCapabilityOrientationName DisplayString

BrCapabilityPaperEntry  
SEQUENCE    
  brCapabilityPaperIndex INTEGER
  brCapabilityPaperName DisplayString

BrCapabilityMediatypeEntry  
SEQUENCE    
  brCapabilityMediatypeIndex INTEGER
  brCapabilityMediatypeName DisplayString

BrCapabilityResolutionEntry  
SEQUENCE    
  brCapabilityResolutionIndex INTEGER
  brCapabilityResolution INTEGER

BrPfKitEntry  
SEQUENCE    
  brPfKitIndex INTEGER
  brPfKitType INTEGER
  brPfKitCount Counter

BrScanCountEntry  
SEQUENCE    
  brScanCountIndex INTEGER
  brScanCountType INTEGER
  brScanCountCounter Counter

BrNotificationEntry  
SEQUENCE    
  brNotificationIndex INTEGER
  brNotificationAddress OCTET STRING
  brNotificationStatusGroup INTEGER
  brNotificationShowURLInfo INTEGER
  brNotificationErrorRule OCTET STRING
  brNotificationRestoration INTEGER

BrNotificationRuleEntry  
SEQUENCE    
  brNotificationRuleIndex INTEGER
  brNotificationStatusID INTEGER
  brNotificationMainRule INTEGER
  brNotificationRuleValue INTEGER

BrPJLInfoOptionsEntry  
SEQUENCE    
  brPJLInfoOptionsIndex INTEGER
  brPJLInfoOptions OCTET STRING

BrPJLInfoIntrayconfigEntry  
SEQUENCE    
  brPJLInfoIntrayconfigIndex INTEGER
  brPJLInfoIntrayconfig OCTET STRING

BrPJLInfoOuttrayconfigEntry  
SEQUENCE    
  brPJLInfoOuttrayconfigIndex INTEGER
  brPJLInfoOuttrayconfig OCTET STRING

BrPJLInfoDXconfigEntry  
SEQUENCE    
  brPJLInfoDXconfigIndex INTEGER
  brPJLInfoDXconfig OCTET STRING

BrPJLInfoStorageconfigEntry  
SEQUENCE    
  brPJLInfoStorageconfigIndex INTEGER
  brPJLInfoStorageconfig OCTET STRING

BrEmailReportsEntry  
SEQUENCE    
  brEmailReportsIndex INTEGER
  brEmailReportsAddress OCTET STRING
  brEmailReportsFrequency INTEGER
  brEmailReportsTime OCTET STRING
  brEmailReportsWeek INTEGER
  brEmailReportsDate INTEGER
  brEmailReportsSendReportNow INTEGER
  brEmailReportsSendReportatPowerOn INTEGER
  brEmailReportsNoRTCFrequency INTEGER
  brEmailReportsReportFormat INTEGER

BrpsPortInfoEntry  
SEQUENCE    
  brpsPortIndex INTEGER
  brpsPortName DisplayString
  brpsPortType INTEGER
  brpsPortStatus INTEGER
  brpsPortStatusString DisplayString
  brpsPortProtocol INTEGER
  brpsPortQueueSize INTEGER
  brpsPortDescriptionString DisplayString
  brpsPortInfoString DisplayString
  brpsPortHTTPExtensions INTEGER
  brpsPortSNMPExtensions INTEGER
  brpsPortAttribute DisplayString
  brpsPortBinaryMode INTEGER
  brpsPortInhibitDatagramSupport INTEGER

BrpsServiceInfoEntry  
SEQUENCE    
  brpsServiceIndex INTEGER
  brpsServiceName DisplayString
  brpsServicePort INTEGER
  brpsServiceFilter INTEGER
  brpsServiceBOT INTEGER
  brpsServiceEOT INTEGER
  brpsServiceMatch INTEGER
  brpsServiceReplace INTEGER
  brpsServiceTCPPort INTEGER
  brpsServiceNDSTree DisplayString
  brpsServiceNDSContext OCTET STRING
  brpsServiceVines DisplayString
  brpsServiceObsolete INTEGER
  brpsServiceNetwareServerCount INTEGER
  brpsServiceReceiveOnly INTEGER
  brpsServiceTCPQueued INTEGER
  brpsServiceProtocolLAT INTEGER
  brpsServiceProtocolTCPIP INTEGER
  brpsServiceProtocolNetware INTEGER
  brpsServiceProtocolAppleTalk INTEGER
  brpsServiceProtocolBanyan INTEGER
  brpsServiceProtocolDLC INTEGER
  brpsServiceProtocolNetBEUI INTEGER
  brpsServiceNetwareServerMode INTEGER
  brpsServiceNetwareRemotePrinterNum INTEGER
  brpsServiceProtocolIPP INTEGER
  brpsServiceAppleTalkType DisplayString

BrpsServiceStringInfoEntry  
SEQUENCE    
  brpsServiceStringIndex INTEGER
  brpsServiceString DisplayString

BrpsTCPIPAccessEntry  
SEQUENCE    
  brpsTCPIPAccessIndex INTEGER
  brpsTCPIPAccessNodeAddress IpAddress
  brpsTCPIPAccessSubnetMask IpAddress

BrpsNetwareServerEntry  
SEQUENCE    
  brpsNetwareServerIndex INTEGER
  brpsNetwareServerName DisplayString

BrProxyServerInfoEntry  
SEQUENCE    
  brProxyServerInfoIndex INTEGER
  brProxyServerType INTEGER
  brProxyServerName OCTET STRING
  brProxyServerPort INTEGER

BrSNMPTrapEntry  
SEQUENCE    
  brSNMPTrapIndex INTEGER
  brTCPIPServerAddress IpAddress

BrpsWLanCapabilityEncryptModeEntry  
SEQUENCE    
  brpsWLanCapabilityEncryptModeIndex INTEGER
  brpsWLanCapabilityEncryptModeType INTEGER
  brpsWLanCapabilityEncryptModeDescription OCTET STRING
  brpsWLanCapabilityEncryptModeSupported INTEGER

BrpsWLanCapabilityAuthModeEntry  
SEQUENCE    
  brpsWLanCapabilitAuthModeIndex INTEGER
  brpsWLanCapabilityAuthModeType INTEGER
  brpsWLanCapabilityAuthModeDescription OCTET STRING
  brpsWLanCapabilityAuthModeSupported INTEGER

BrpsWLanCapabilityAuthEAPEntry  
SEQUENCE    
  brpsWLanCapabilityAuthEAPIndex INTEGER
  brpsWLanCapabilityAuthEAPType INTEGER
  brpsWLanCapabilityAuthEAPDescription OCTET STRING
  brpsWLanCapabilityAuthEAPSupported INTEGER
  brpsWLanCapabilityAuthEAPSupportAuthentication INTEGER
  brpsWLanCapabilityAuthEAPSupportEncryption INTEGER

BrpsAvailableWLanEntry  
SEQUENCE    
  brpsAvailableWLanIndex INTEGER
  brpsAvailableWLanName OCTET STRING
  brpsAvailableWLanMode INTEGER
  brpsAvailableWLanCommMode INTEGER
  brpsAvailableWLanChannel INTEGER
  brpsAvailableWLanPowerLevel INTEGER
  brpsAvailableWLanAuthMode INTEGER
  brpsAvailableWLanEncryptMode INTEGER

BrpsWLanWepKeyEntry  
SEQUENCE    
  brpsWLanWepKeyIndex INTEGER
  brpsWLanWepKeySize INTEGER
  brpsWLanWepKeyType INTEGER
  brpsWLanWepKey OCTET STRING

BrMultiIFConfigureEntry  
SEQUENCE    
  brMultiIFConfigureIndex INTEGER
  brMultiIFType INTEGER
  brMultiIFDescription DisplayString
  brMultiIFNodeName OCTET STRING
  brMultiIFInterfaceEnable INTEGER
  brMultiIFEnetMode INTEGER
  brMultiIFHardwareType INTEGER
  brMultiIFNodeType OCTET STRING
  brMultiIFInterfaceEnableImmediate INTEGER

BrMultiIFDNSEntry  
SEQUENCE    
  brMultiIFTCPIPDNSIPSetup INTEGER
  brMultiIFPrimaryDNSIPAddress IpAddress
  brMultiIFSecondaryDNSIPAddress IpAddress
  brMultiIFTCPIPConnectTime INTEGER

BrMultiIFControlEntry  
SEQUENCE    
  brMultiIFSetDefault INTEGER

BrMultiIFServiceEntry  
SEQUENCE    
  brMultiIFServiceCount INTEGER
  brMultiIFServiceStringLimit INTEGER
  brMultiIFServiceStringCount INTEGER
  brMultiIFServiceFilterCount INTEGER

BrMultiIFServiceInfoEntry  
SEQUENCE    
  brMultiIFServiceIndex INTEGER
  brMultiIFServiceName DisplayString
  brMultiIFServicePort INTEGER
  brMultiIFServiceFilter INTEGER
  brMultiIFServiceBOT INTEGER
  brMultiIFServiceEOT INTEGER
  brMultiIFServiceMatch INTEGER
  brMultiIFServiceReplace INTEGER
  brMultiIFServiceTCPPort INTEGER
  brMultiIFServiceNDSTree DisplayString
  brMultiIFServiceNDSContext OCTET STRING
  brMultiIFServiceVines DisplayString
  brMultiIFServiceObsolete INTEGER
  brMultiIFServiceNetwareServerCount INTEGER
  brMultiIFServiceReceiveOnly INTEGER
  brMultiIFServiceTCPQueued INTEGER
  brMultiIFServiceProtocolLAT INTEGER
  brMultiIFServiceProtocolTCPIP INTEGER
  brMultiIFServiceProtocolNetware INTEGER
  brMultiIFServiceProtocolAppleTalk INTEGER
  brMultiIFServiceProtocolBanyan INTEGER
  brMultiIFServiceProtocolDLC INTEGER
  brMultiIFServiceProtocolNetBEUI INTEGER
  brMultiIFServiceNetwareServerMode INTEGER
  brMultiIFServiceNetwareRemotePrinterNum INTEGER
  brMultiIFServiceProtocolIPP INTEGER
  brMultiIFServiceAppleTalkType DisplayString

BrMultiIFServiceStringInfoEntry  
SEQUENCE    
  brMultiIFServiceStringIndex INTEGER
  brMultiIFServiceString DisplayString

BrMultiIFTCPIPEntry  
SEQUENCE    
  brMultiIFTCPIPAddress IpAddress
  brMultiIFTCPIPSubnetMask IpAddress
  brMultiIFTCPIPGateway IpAddress
  brMultiIFTCPIPMethod INTEGER
  brMultiIFTCPIPUpdate OCTET STRING
  brMultiIFTCPIPTimeout INTEGER
  brMultiIFTCPIPBootTries INTEGER
  brMultiIFTCPIPRARPNoSubnet INTEGER
  brMultiIFTCPIPRARPNoGateway INTEGER
  brMultiIFTCPIPUseMethod INTEGER
  brMultiIFTCPIPMethodServer IpAddress

BrMultiIFNetBIOSEntry  
SEQUENCE    
  brMultiIFNetBIOSIPMethod INTEGER
  brMultiIFTCPIPNetBIOSPrimaryWINSAddr IpAddress
  brMultiIFTCPIPNetBIOSSecondaryWINSAddr IpAddress
  brMultiIFNetBEUIDomain DisplayString

BrMultiIFAPIPAEntry  
SEQUENCE    
  brMultiIFAPIPASupported INTEGER
  brMultiIFAPIPAEnable INTEGER

BrMultiIFLAAEntry  
SEQUENCE    
  brMultiIFLAASupported INTEGER
  brMultiIFLAAMacAddress OCTET STRING

BrMultiIFIPv6AddressCountEntry  
SEQUENCE    
  brMultiIFIPv6AddressCount INTEGER

BrMultiIFIPv6AddressEntry  
SEQUENCE    
  brMultiIFIPv6AddressIndex INTEGER
  brMultiIFIPv6Address Ipv6Address
  brMultiIFIPv6UseMethod INTEGER
  brMultiIFIPv6MethodServer DisplayString

BrMultiIFIPv6StaticAddressCountEntry  
SEQUENCE    
  brMultiIFIPv6StaticAddressCount INTEGER

BrMultiIFIPv6StaticAddressEntry  
SEQUENCE    
  brMultiIFIPv6StaticAddressIndex INTEGER
  brMultiIFIPv6StaticAddressEnable INTEGER
  brMultiIFIPv6StaticAddress Ipv6Address
  brMultiIFIPv6StaticAddressPrefixLength INTEGER

BrMultiIFDNSIPv6AddressEntry  
SEQUENCE    
  brMultiIFPrimaryDNSIPv6Address Ipv6Address
  brMultiIFSecondaryDNSIPv6Address Ipv6Address

BrMultiIFWebServicesEntry  
SEQUENCE    
  brMultiIFWebServicesName DisplayString
  brMultiIFWebServicesInstanceID INTEGER
  brMultiIFWebServicesMetadataVersion INTEGER

BrLdapServerInfoEntry  
SEQUENCE    
  brLdapServerInfoIndex INTEGER
  brLdapServerName DisplayString
  brLdapServerPort INTEGER
  brLdapServerAuth INTEGER
  brLdapServerUserDN OCTET STRING
  brLdapServerPassword OCTET STRING
  brLdapServerPasswordSet INTEGER
  brLdapServerBaseDN OCTET STRING
  brLdapServerAttrEMail DisplayString
  brLdapServerAttrFAXNumber DisplayString
  brLdapServerAttrDetail1 DisplayString
  brLdapServerAttrDetail2 DisplayString
  brLdapServerAttrDetail3 DisplayString
  brLdapServerAttrDetail4 DisplayString
  brLdapServerAttrDetailEnable1 INTEGER
  brLdapServerAttrDetailEnable2 INTEGER
  brLdapServerAttrDetailEnable3 INTEGER
  brLdapServerAttrDetailEnable4 INTEGER
  brLdapKerberosServerName DisplayString
  brLdapKerberosServerPort INTEGER

BrLdapServerAttrNameEntry  
SEQUENCE    
  brLdapServerAttrNameIndex INTEGER
  brLdapServerAttrName DisplayString

BrFuncLockPublicEntry  
SEQUENCE    
  brFuncLockPublicFuncIndex INTEGER
  brFuncLockPublicFuncMember INTEGER
  brFuncLockPublicFuncSupported INTEGER
  brFuncLockPublicFuncEnable INTEGER

BrFuncLockUserEntry  
SEQUENCE    
  brFuncLockUserIndex INTEGER
  brFuncLockUserName DisplayString
  brFuncLockUserPassword DisplayString

BrFuncLockUserFuncEntry  
SEQUENCE    
  brFuncLockUserFuncIndex INTEGER
  brFuncLockUserFuncMember INTEGER
  brFuncLockUserFuncSupported INTEGER
  brFuncLockUserFuncEnable INTEGER

BrPJLInfoFirmwareUpdateconfigEntry  
SEQUENCE    
  brPJLInfoFirmwareUpdateconfigIndex INTEGER
  brPJLInfoFirmwareUpdateconfig OCTET STRING

BrFirmwareUpdateKeywordEntry  
SEQUENCE    
  brFirmwareUpdateKeywordIndex INTEGER
  brFirmwareUpdateKeyword OCTET STRING

BrFuncLockUserPrintPageEntry  
SEQUENCE    
  brFuncLockUserPrintPageCountMono INTEGER
  brFuncLockUserPrintPageCountColor INTEGER
  brFuncLockUserPrintPageIndex INTEGER
  brFuncLockUserPrintPageLimitEnable INTEGER
  brFuncLockUserPrintPageMax INTEGER
  brFuncLockUserPrintPageCountMonoLast INTEGER
  brFuncLockUserPrintPageCountColorLast INTEGER

BrFuncLockPcLoginNameEntry  
SEQUENCE    
  brFuncLockPcLoginNameAuthIndex INTEGER
  brFuncLockPcLoginName OCTET STRING
  brFuncLockPcLoginNameAuthID INTEGER

Defined Values

brother 1.3.6.1.4.1.2435
OBJECT IDENTIFIER    

nm 1.3.6.1.4.1.2435.2
OBJECT IDENTIFIER    

system 1.3.6.1.4.1.2435.2.3
OBJECT IDENTIFIER    

interface 1.3.6.1.4.1.2435.2.4
OBJECT IDENTIFIER    

net-peripheral 1.3.6.1.4.1.2435.2.3.9
OBJECT IDENTIFIER    

net-printer 1.3.6.1.4.1.2435.2.3.9.1
OBJECT IDENTIFIER    

net-MFP 1.3.6.1.4.1.2435.2.3.9.2
OBJECT IDENTIFIER    

netPML 1.3.6.1.4.1.2435.2.3.9.4
OBJECT IDENTIFIER    

generalDeviceStatus 1.3.6.1.4.1.2435.2.3.9.1.1
OBJECT IDENTIFIER    

fax-setup 1.3.6.1.4.1.2435.2.3.9.2.1
OBJECT IDENTIFIER    

scanner-setup 1.3.6.1.4.1.2435.2.3.9.2.11
OBJECT IDENTIFIER    

mfpCapability 1.3.6.1.4.1.2435.2.3.9.2.101
OBJECT IDENTIFIER    

mfpgeneral-setup 1.3.6.1.4.1.2435.2.3.9.2.111
OBJECT IDENTIFIER    

netPMLmgmt 1.3.6.1.4.1.2435.2.3.9.4.2
OBJECT IDENTIFIER    

status 1.3.6.1.4.1.2435.2.3.9.1.1.2
OBJECT IDENTIFIER    

autodial 1.3.6.1.4.1.2435.2.3.9.2.1.1
OBJECT IDENTIFIER    

fax-general 1.3.6.1.4.1.2435.2.3.9.2.1.2
OBJECT IDENTIFIER    

onetouchDial 1.3.6.1.4.1.2435.2.3.9.2.1.1.1
OBJECT IDENTIFIER    

speedDial 1.3.6.1.4.1.2435.2.3.9.2.1.1.2
OBJECT IDENTIFIER    

scanToInfo 1.3.6.1.4.1.2435.2.3.9.2.11.1
OBJECT IDENTIFIER    

mcGeneral 1.3.6.1.4.1.2435.2.3.9.2.101.1
OBJECT IDENTIFIER    

mcFax 1.3.6.1.4.1.2435.2.3.9.2.101.2
OBJECT IDENTIFIER    

mcScanner 1.3.6.1.4.1.2435.2.3.9.2.101.3
OBJECT IDENTIFIER    

mcgRemoteSetup 1.3.6.1.4.1.2435.2.3.9.2.101.1.11
OBJECT IDENTIFIER    

mcfGeneral 1.3.6.1.4.1.2435.2.3.9.2.101.2.1
OBJECT IDENTIFIER    

mcfNetFaxShare 1.3.6.1.4.1.2435.2.3.9.2.101.2.11
OBJECT IDENTIFIER    

mcfNetPcFaxRx 1.3.6.1.4.1.2435.2.3.9.2.101.2.12
OBJECT IDENTIFIER    

mcfFaxInfomation 1.3.6.1.4.1.2435.2.3.9.2.101.2.101
OBJECT IDENTIFIER    

mcsNetScanner 1.3.6.1.4.1.2435.2.3.9.2.101.3.11
OBJECT IDENTIFIER    

mcsNetSKy 1.3.6.1.4.1.2435.2.3.9.2.101.3.12
OBJECT IDENTIFIER    

tonerlow 1.3.6.1.4.1.2435.2.3.9.1.1.2.10
OBJECT IDENTIFIER    

device 1.3.6.1.4.1.2435.2.3.9.4.2.1
OBJECT IDENTIFIER    

destination-subsystem1 1.3.6.1.4.1.2435.2.3.9.4.2.1.1
OBJECT IDENTIFIER    

sleep 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.1
OBJECT IDENTIFIER    

autoc 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.2
OBJECT IDENTIFIER    

simm 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4
OBJECT IDENTIFIER    

specification 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1
OBJECT IDENTIFIER    

simmkind0 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.1
OBJECT IDENTIFIER    

simmkind1 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.2
OBJECT IDENTIFIER    

simmkind2 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.3
OBJECT IDENTIFIER    

simmkind3 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.4
OBJECT IDENTIFIER    

bio1-explanation 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.3
OBJECT IDENTIFIER    

determined 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.3.1
OBJECT IDENTIFIER    

destination-subsystem2 1.3.6.1.4.1.2435.2.3.9.4.2.1.2
OBJECT IDENTIFIER    

printerjob 1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1
OBJECT IDENTIFIER    

jobend 1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1.1
OBJECT IDENTIFIER    

destination-subsystem3 1.3.6.1.4.1.2435.2.3.9.4.2.1.3
OBJECT IDENTIFIER    

prt-setup 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3
OBJECT IDENTIFIER    

prt-condition 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1
OBJECT IDENTIFIER    

destination-subsystem4 1.3.6.1.4.1.2435.2.3.9.4.2.1.4
OBJECT IDENTIFIER    


prt-density 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.1
OBJECT IDENTIFIER    

status-prt-eng 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.2
OBJECT IDENTIFIER    

tray 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3
OBJECT IDENTIFIER    

economy 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.6
OBJECT IDENTIFIER    

manual 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.1
OBJECT IDENTIFIER    

traysize 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3
OBJECT IDENTIFIER    

mp 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.1
OBJECT IDENTIFIER    

cassette 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.2
OBJECT IDENTIFIER    

cassette2 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.3
OBJECT IDENTIFIER    

cassette3 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.4
OBJECT IDENTIFIER    

cassette4 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.5
OBJECT IDENTIFIER    

brorg 1.3.6.1.4.1.2435.2.3.9.4.2.1.5
OBJECT IDENTIFIER    

printersetup 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1
OBJECT IDENTIFIER    

pagesetup 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2
OBJECT IDENTIFIER    

fontsetup 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3
OBJECT IDENTIFIER    

controlpanel 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4
OBJECT IDENTIFIER    

printerinfomation 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5
OBJECT IDENTIFIER    

printerstatus 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.6
OBJECT IDENTIFIER    

secret 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7
OBJECT IDENTIFIER    

adminsetting 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8
OBJECT IDENTIFIER    

general 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1
OBJECT IDENTIFIER    

advanced 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2
OBJECT IDENTIFIER    

mail 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3
OBJECT IDENTIFIER    

finisher 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.4
OBJECT IDENTIFIER    

catch-tray 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.5
OBJECT IDENTIFIER    

autoff 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.7
OBJECT IDENTIFIER    

buzzer 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22
OBJECT IDENTIFIER    

smallPaperSize 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51
OBJECT IDENTIFIER    

trayPriority 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52
OBJECT IDENTIFIER    

carbonCopy 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53
OBJECT IDENTIFIER    

mediaFix 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54
OBJECT IDENTIFIER    

directprint 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60
OBJECT IDENTIFIER    

pictbridge 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61
OBJECT IDENTIFIER    

colorcorrection 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62
OBJECT IDENTIFIER    

pcl 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1
OBJECT IDENTIFIER    

ps 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2
OBJECT IDENTIFIER    

gl 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3
OBJECT IDENTIFIER    

epson 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4
OBJECT IDENTIFIER    

ibm 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5
OBJECT IDENTIFIER    

margin-p 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1
OBJECT IDENTIFIER    

auto-p 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2
OBJECT IDENTIFIER    

pen1 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.1
OBJECT IDENTIFIER    

pen2 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.2
OBJECT IDENTIFIER    

pen3 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.3
OBJECT IDENTIFIER    

pen4 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.4
OBJECT IDENTIFIER    

pen5 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.5
OBJECT IDENTIFIER    

pen6 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.6
OBJECT IDENTIFIER    

margin-e 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1
OBJECT IDENTIFIER    

auto-e 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.2
OBJECT IDENTIFIER    

margin-i 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1
OBJECT IDENTIFIER    

auto-i 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2
OBJECT IDENTIFIER    

reset 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.1
OBJECT IDENTIFIER    

test 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2
OBJECT IDENTIFIER    

panellock 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3
OBJECT IDENTIFIER    

key 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4
OBJECT IDENTIFIER    

panelinfo 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5
OBJECT IDENTIFIER    

version 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.3
OBJECT IDENTIFIER    

errorHistory 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51
OBJECT IDENTIFIER    

printPages 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52
OBJECT IDENTIFIER    

capability 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53
OBJECT IDENTIFIER    

countinfo 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54
OBJECT IDENTIFIER    

copies 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.1
OBJECT IDENTIFIER    

orientation 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2
OBJECT IDENTIFIER    

paper 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3
OBJECT IDENTIFIER    

mediatype 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4
OBJECT IDENTIFIER    

resolution 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5
OBJECT IDENTIFIER    

pfkit 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1
OBJECT IDENTIFIER    

scancount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2
OBJECT IDENTIFIER    

clockfunction 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1
OBJECT IDENTIFIER    

npCard 1.3.6.1.4.1.2435.2.4.3
OBJECT IDENTIFIER    

npSys 1.3.6.1.4.1.2435.2.4.3.1
OBJECT IDENTIFIER    

npConfig 1.3.6.1.4.1.2435.2.4.3.1.1
OBJECT IDENTIFIER    

adminCapa 1.3.6.1.4.1.2435.2.4.3.1.99
OBJECT IDENTIFIER    

userSetting 1.3.6.1.4.1.2435.2.4.3.1.100
OBJECT IDENTIFIER    

verify 1.3.6.1.4.1.2435.2.4.3.1.101
OBJECT IDENTIFIER    

npTcp 1.3.6.1.4.1.2435.2.4.3.6
OBJECT IDENTIFIER    

lpd 1.3.6.1.4.1.2435.2.4.3.6.99
OBJECT IDENTIFIER    


npCtl 1.3.6.1.4.1.2435.2.4.3.7
OBJECT IDENTIFIER    

etherN 1.3.6.1.4.1.2435.2.4.3.7.99
OBJECT IDENTIFIER    

eNet 1.3.6.1.4.1.2435.2.4.3.7.99.1
OBJECT IDENTIFIER    

npPort 1.3.6.1.4.1.2435.2.4.3.13
OBJECT IDENTIFIER    

funa 1.3.6.1.4.1.2435.2.4.3.13.10
OBJECT IDENTIFIER    

npSet 1.3.6.1.4.1.2435.2.4.3.99
OBJECT IDENTIFIER    

dns 1.3.6.1.4.1.2435.2.4.3.99.1
OBJECT IDENTIFIER    

pushstatus 1.3.6.1.4.1.2435.2.4.3.99.2
OBJECT IDENTIFIER    

pjl 1.3.6.1.4.1.2435.2.4.3.99.3
OBJECT IDENTIFIER    

eMailReports 1.3.6.1.4.1.2435.2.4.3.99.4
OBJECT IDENTIFIER    

pjlinfo 1.3.6.1.4.1.2435.2.4.3.99.3.1
OBJECT IDENTIFIER    

priadmin 1.3.6.1.4.1.2435.2.4.3.99.2.2
OBJECT IDENTIFIER    

secadmin 1.3.6.1.4.1.2435.2.4.3.99.2.3
OBJECT IDENTIFIER    

brnetConfig 1.3.6.1.4.1.2435.2.4.3.1240
OBJECT IDENTIFIER    

brconfig 1.3.6.1.4.1.2435.2.4.3.1240.1
OBJECT IDENTIFIER    

brcontrol 1.3.6.1.4.1.2435.2.4.3.1240.2
OBJECT IDENTIFIER    

brport 1.3.6.1.4.1.2435.2.4.3.1240.3
OBJECT IDENTIFIER    

brservice 1.3.6.1.4.1.2435.2.4.3.1240.4
OBJECT IDENTIFIER    

brprotocol 1.3.6.1.4.1.2435.2.4.3.1240.5
OBJECT IDENTIFIER    

brfirmware 1.3.6.1.4.1.2435.2.4.3.1240.6
OBJECT IDENTIFIER    

brlat 1.3.6.1.4.1.2435.2.4.3.1240.5.1
OBJECT IDENTIFIER    

brtcpip 1.3.6.1.4.1.2435.2.4.3.1240.5.2
OBJECT IDENTIFIER    

brnetware 1.3.6.1.4.1.2435.2.4.3.1240.5.3
OBJECT IDENTIFIER    

brappletalk 1.3.6.1.4.1.2435.2.4.3.1240.5.4
OBJECT IDENTIFIER    

brbanyan 1.3.6.1.4.1.2435.2.4.3.1240.5.5
OBJECT IDENTIFIER    

bremail 1.3.6.1.4.1.2435.2.4.3.1240.5.6
OBJECT IDENTIFIER    

brdlc 1.3.6.1.4.1.2435.2.4.3.1240.5.7
OBJECT IDENTIFIER    

brnetbeui 1.3.6.1.4.1.2435.2.4.3.1240.5.8
OBJECT IDENTIFIER    

bripp 1.3.6.1.4.1.2435.2.4.3.1240.5.9
OBJECT IDENTIFIER    

brntsend 1.3.6.1.4.1.2435.2.4.3.1240.5.10
OBJECT IDENTIFIER    

brnetConfigOpt 1.3.6.1.4.1.2435.2.4.3.2435
OBJECT IDENTIFIER    

broriginalprotocol 1.3.6.1.4.1.2435.2.4.3.2435.5
OBJECT IDENTIFIER    

broriginaltcpip 1.3.6.1.4.1.2435.2.4.3.2435.5.2
OBJECT IDENTIFIER    

broriginalftp 1.3.6.1.4.1.2435.2.4.3.2435.5.10
OBJECT IDENTIFIER    

broriginalupnp 1.3.6.1.4.1.2435.2.4.3.2435.5.11
OBJECT IDENTIFIER    

broriginalapipa 1.3.6.1.4.1.2435.2.4.3.2435.5.12
OBJECT IDENTIFIER    

broriginalmdns 1.3.6.1.4.1.2435.2.4.3.2435.5.13
OBJECT IDENTIFIER    

broriginalLAA 1.3.6.1.4.1.2435.2.4.3.2435.5.14
OBJECT IDENTIFIER    

broriginalIPv6 1.3.6.1.4.1.2435.2.4.3.2435.5.15
OBJECT IDENTIFIER    

broriginaltelnet 1.3.6.1.4.1.2435.2.4.3.2435.5.16
OBJECT IDENTIFIER    

broriginalEWS 1.3.6.1.4.1.2435.2.4.3.2435.5.17
OBJECT IDENTIFIER    

broriginalSNMP 1.3.6.1.4.1.2435.2.4.3.2435.5.18
OBJECT IDENTIFIER    

broriginalldap 1.3.6.1.4.1.2435.2.4.3.2435.5.19
OBJECT IDENTIFIER    

broriginalTFTP 1.3.6.1.4.1.2435.2.4.3.2435.5.20
OBJECT IDENTIFIER    

broriginalHTTPS 1.3.6.1.4.1.2435.2.4.3.2435.5.21
OBJECT IDENTIFIER    

broriginalLPD 1.3.6.1.4.1.2435.2.4.3.2435.5.22
OBJECT IDENTIFIER    

broriginalRawPort 1.3.6.1.4.1.2435.2.4.3.2435.5.23
OBJECT IDENTIFIER    

broriginalLLTD 1.3.6.1.4.1.2435.2.4.3.2435.5.24
OBJECT IDENTIFIER    

broriginalWebServices 1.3.6.1.4.1.2435.2.4.3.2435.5.25
OBJECT IDENTIFIER    

broriginalLLMNR 1.3.6.1.4.1.2435.2.4.3.2435.5.26
OBJECT IDENTIFIER    

broriginalSecurity 1.3.6.1.4.1.2435.2.4.3.2435.5.100
OBJECT IDENTIFIER    

broriginalinternetsetting 1.3.6.1.4.1.2435.2.4.3.2435.10
OBJECT IDENTIFIER    

broriginalproxy 1.3.6.1.4.1.2435.2.4.3.2435.10.1
OBJECT IDENTIFIER    

broriginalOtherSetting 1.3.6.1.4.1.2435.2.4.3.2435.20
OBJECT IDENTIFIER    

broriginalJobTermination 1.3.6.1.4.1.2435.2.4.3.2435.20.1
OBJECT IDENTIFIER    

broriginalSNMPTrap 1.3.6.1.4.1.2435.2.4.3.2435.20.2
OBJECT IDENTIFIER    

broriginalLegacy 1.3.6.1.4.1.2435.2.4.3.2435.20.3
OBJECT IDENTIFIER    

brSecurityGeneralStatus 1.3.6.1.4.1.2435.2.4.3.2435.5.100.1
OBJECT IDENTIFIER    

brSecurityGeneralSetup 1.3.6.1.4.1.2435.2.4.3.2435.5.100.2
OBJECT IDENTIFIER    

brSecurityDeviceNegotiation 1.3.6.1.4.1.2435.2.4.3.2435.5.100.10
OBJECT IDENTIFIER    

wireless 1.3.6.1.4.1.2435.2.4.3.100
OBJECT IDENTIFIER    

wlInfo 1.3.6.1.4.1.2435.2.4.3.100.1
OBJECT IDENTIFIER    

wlCapability 1.3.6.1.4.1.2435.2.4.3.100.1.1
OBJECT IDENTIFIER    

wlGeneralInfo 1.3.6.1.4.1.2435.2.4.3.100.1.2
OBJECT IDENTIFIER    

wlNetSearch 1.3.6.1.4.1.2435.2.4.3.100.1.11
OBJECT IDENTIFIER    

wlAOSS 1.3.6.1.4.1.2435.2.4.3.100.1.12
OBJECT IDENTIFIER    

wlSES 1.3.6.1.4.1.2435.2.4.3.100.1.13
OBJECT IDENTIFIER    

wlWPS 1.3.6.1.4.1.2435.2.4.3.100.1.14
OBJECT IDENTIFIER    

wlSetup 1.3.6.1.4.1.2435.2.4.3.100.11
OBJECT IDENTIFIER    

wlGeneral 1.3.6.1.4.1.2435.2.4.3.100.11.1
OBJECT IDENTIFIER    

wlAdvanced 1.3.6.1.4.1.2435.2.4.3.100.11.5
OBJECT IDENTIFIER    

wlAssociate 1.3.6.1.4.1.2435.2.4.3.100.11.11
OBJECT IDENTIFIER    

wlWEP 1.3.6.1.4.1.2435.2.4.3.100.11.11.101
OBJECT IDENTIFIER    

wlWPA 1.3.6.1.4.1.2435.2.4.3.100.11.11.102
OBJECT IDENTIFIER    

wlTKIP 1.3.6.1.4.1.2435.2.4.3.100.11.11.103
OBJECT IDENTIFIER    

wlLEAP 1.3.6.1.4.1.2435.2.4.3.100.11.11.104
OBJECT IDENTIFIER    

wlStatus 1.3.6.1.4.1.2435.2.4.3.100.21
OBJECT IDENTIFIER    

wlGeneralStatus 1.3.6.1.4.1.2435.2.4.3.100.21.1
OBJECT IDENTIFIER    

npMultiCards 1.3.6.1.4.1.2435.2.4.4
OBJECT IDENTIFIER    

npMultiIFSet 1.3.6.1.4.1.2435.2.4.4.99
OBJECT IDENTIFIER    

brMultiIFdns 1.3.6.1.4.1.2435.2.4.4.99.1
OBJECT IDENTIFIER    

brnetMultiIFConfig 1.3.6.1.4.1.2435.2.4.4.1240
OBJECT IDENTIFIER    

brMultiIFconfig 1.3.6.1.4.1.2435.2.4.4.1240.1
OBJECT IDENTIFIER    

brMultiIFcontrol 1.3.6.1.4.1.2435.2.4.4.1240.2
OBJECT IDENTIFIER    

brMultiIFservice 1.3.6.1.4.1.2435.2.4.4.1240.4
OBJECT IDENTIFIER    

brMultiIFprotocol 1.3.6.1.4.1.2435.2.4.4.1240.5
OBJECT IDENTIFIER    

brMultiIFtcpip 1.3.6.1.4.1.2435.2.4.4.1240.5.2
OBJECT IDENTIFIER    

brMultiIFnetbeui 1.3.6.1.4.1.2435.2.4.4.1240.5.8
OBJECT IDENTIFIER    

brMultiIForiginalapipa 1.3.6.1.4.1.2435.2.4.4.1240.5.12
OBJECT IDENTIFIER    

brMultiIForiginalLAA 1.3.6.1.4.1.2435.2.4.4.1240.5.14
OBJECT IDENTIFIER    

brMultiIForiginalIPv6 1.3.6.1.4.1.2435.2.4.4.1240.5.15
OBJECT IDENTIFIER    

brMultiIForiginalWebServices 1.3.6.1.4.1.2435.2.4.4.1240.5.16
OBJECT IDENTIFIER    

funclock 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63
OBJECT IDENTIFIER    

broriginalKerberos 1.3.6.1.4.1.2435.2.4.3.2435.5.27
OBJECT IDENTIFIER    

broriginalCIFS 1.3.6.1.4.1.2435.2.4.3.2435.5.28
OBJECT IDENTIFIER    

broriginalSNTP 1.3.6.1.4.1.2435.2.4.3.2435.5.29
OBJECT IDENTIFIER    

firmwareupdatekeyword 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55
OBJECT IDENTIFIER    

autocountreset 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31
OBJECT IDENTIFIER    

wlSimpleWizard 1.3.6.1.4.1.2435.2.4.3.100.1.15
OBJECT IDENTIFIER    

brJamPlace 1.3.6.1.4.1.2435.2.3.9.1.1.2.9
Location of JAM. 0:No Jam 1:Jam Trays 2:Jam Inside 3:Jam Rear 4:Jam Duplex unit
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

brToner1Low 1.3.6.1.4.1.2435.2.3.9.1.1.2.10.1
Black Toner status. 0:Toner Full 1:Toner Low 2:No Toner Cartridge 3:Toner Empty
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

brToner2Low 1.3.6.1.4.1.2435.2.3.9.1.1.2.10.2
Cyan Toner status. 0:Toner Ready 1:Toner Low 2:No Toner Cartridge 3:Toner Empty
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

brToner3Low 1.3.6.1.4.1.2435.2.3.9.1.1.2.10.3
Magenta Toner status. 0:Toner Ready 1:Toner Low 2:No Toner Cartridge 3:Toner Empty
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

brToner4Low 1.3.6.1.4.1.2435.2.3.9.1.1.2.10.4
Yellow Toner status. 0:Toner Ready 1:Toner Low 2:No Toner Cartridge 3:Toner Empty
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

brieee1284id 1.3.6.1.4.1.2435.2.3.9.1.1.7
IEEE1284 device ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brttt1 1.3.6.1.4.1.2435.2.3.9.1.1.10
unused
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

brOneTouchDialCount 1.3.6.1.4.1.2435.2.3.9.2.1.1.1.1
Maximum number of One touch dial.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brOneTouchDialTable 1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2
This table represents One touch dial.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrOneTouchDialEntry

brOneTouchDialEntry 1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2.1
A row in the OneTouchDial table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrOneTouchDialEntry  

brOneTouchDialIndex 1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2.1.1
The One touch dial number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brOneTouchDialData 1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2.1.2
The One Touch dial data.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brSpeedDialCount 1.3.6.1.4.1.2435.2.3.9.2.1.1.2.1
Maximum number of Speed dial.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brSpeedDialTable 1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2
This table represents Speed dial.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrSpeedDialEntry

brSpeedDialEntry 1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2.1
A row in the speedDial table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrSpeedDialEntry  

brSpeedDialIndex 1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2.1.1
The Speed dial number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brSpeedDialData 1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2.1.2
The Speed dial Data.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brDialDataAllClear 1.3.6.1.4.1.2435.2.3.9.2.1.1.3
Clear the all data of Onetouch dial and Speed dial.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

brFaxReceiveMode 1.3.6.1.4.1.2435.2.3.9.2.1.2.1
Fax Receive Mode 0:Auto 1:Manual 2:FaxTel 3:TAD
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brRingDelayCount 1.3.6.1.4.1.2435.2.3.9.2.1.2.2
Ring Delay Count
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4  

brOwnFaxNumber 1.3.6.1.4.1.2435.2.3.9.2.1.2.3
Own Fax Number
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brRegisterKeyInfo 1.3.6.1.4.1.2435.2.3.9.2.11.1.1
Add the ScanTo information. If device receives GET request, device should reply fix value TRUE(writable), FALSE(not writable) to the client.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brUnRegisterKeyInfo 1.3.6.1.4.1.2435.2.3.9.2.11.1.2
Remove the ScanTo information. If device receives GET request, device should reply fix value TRUE (writable), FALSE (not writable) to the client.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brNetSKeyReceiverAddress 1.3.6.1.4.1.2435.2.3.9.2.11.1.5
IP Address or the name of the S-Key Receiver.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

brNetRemoteSetUpSupported 1.3.6.1.4.1.2435.2.3.9.2.101.1.11.1
0 indicates the Net Remote Setup function is not supported. 1 indicates the Net Remote Setup function is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brNetRemoteSetUpEnable 1.3.6.1.4.1.2435.2.3.9.2.101.1.11.2
0 indicates the Net Remote Setup is not enabled. 1 indicates that the Net Remote Setup is enabled. Writing a non-zero value will enable the Net Remote Setup if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brFaxSupported 1.3.6.1.4.1.2435.2.3.9.2.101.2.1.1
0 indicates the Fax function is not supported. 1 indicates the Fax function is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brIFaxSupported 1.3.6.1.4.1.2435.2.3.9.2.101.2.1.3
0 indicates the IFax function is not supported. 1 indicates the IFax function is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brNetFaxShareSupported 1.3.6.1.4.1.2435.2.3.9.2.101.2.11.1
0 indicates the Net Fax Share is not supported. 1 indicates the Net Fax Share is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brNetFaxShareEnable 1.3.6.1.4.1.2435.2.3.9.2.101.2.11.2
0 indicates the Net Fax Share is not enabled. 1 indicates that the Net Fax Share is enabled. Writing a non-zero value will enable the Net Fax Share if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brNetPcFaxRxSupported 1.3.6.1.4.1.2435.2.3.9.2.101.2.12.1
0 indicates the Net PC Fax Rx is not supported. 1 indicates the Net PC Fax Rx is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brNetPcFaxRxEnable 1.3.6.1.4.1.2435.2.3.9.2.101.2.12.2
0 indicates the Net PC Fax Rx is not enabled. 1 indicates that the Net PC Fax Rx is enabled. Writing a non-zero value will enable the Net PC Fax Rx if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brNetRegisterPcFaxInfo 1.3.6.1.4.1.2435.2.3.9.2.101.2.12.3
Add the PcFax information. If device receives GET request, device should reply fix value TRUE(writable), FALSE(not writable) to the client.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brPhoneNumberLastFax 1.3.6.1.4.1.2435.2.3.9.2.101.2.101.1
Phone Number of Last Fax
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

brPagesSentLastFax 1.3.6.1.4.1.2435.2.3.9.2.101.2.101.2
Pages Sent in Last Fax
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

brTimestampLastFax 1.3.6.1.4.1.2435.2.3.9.2.101.2.101.3
Timestamp of Last Fax
Status: mandatory Access: read-only
OBJECT-TYPE    
  DateAndTime  

brFaxHeaderInfo 1.3.6.1.4.1.2435.2.3.9.2.101.2.101.4
Fax Header Infomation
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..50)  

brNetScannerSupported 1.3.6.1.4.1.2435.2.3.9.2.101.3.11.1
0 indicates the Net Scanner is not supported. 1 indicates the Net Scanner is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brNetScannerEnable 1.3.6.1.4.1.2435.2.3.9.2.101.3.11.2
0 indicates the Net Scanner is not enabled. 1 indicates that the Net Scanner is enabled. Writing a non-zero value will enable the Net Scanner if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brNetSKeySupported 1.3.6.1.4.1.2435.2.3.9.2.101.3.12.1
0 indicates the Net S-Key is not supported. 1 indicates the Net S-Key is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brNetSKeyEnable 1.3.6.1.4.1.2435.2.3.9.2.101.3.12.2
0 indicates the Net S-Key is not enabled. 1 indicates that the Net S-Key is enabled. Writing a non-zero value will enable the Net S-Key if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brServiceMode 1.3.6.1.4.1.2435.2.3.9.2.111.1
Service Mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brLockMode 1.3.6.1.4.1.2435.2.3.9.2.111.2
Lock Mode 0:normal 1:Customer 2:Lock
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brActivityReportSetting 1.3.6.1.4.1.2435.2.3.9.2.111.3
Activity Report Setting 0:off 1:every 1hour 3:every 3hour 6:every 6hour 12:every 12hour 24:every 24hour 48:every 2day 96:every 4day 240:every Sunday 241:every Monday 242:every Tueseday 243:every Wednesday 244:every Thurseday 245:every Friday 246:every Saturday 255:interval 50FAX
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brpowerstime 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.1.1
PowerSave Timeout value. 1 to 2147483647 (sec)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

brautocont 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.2.7
Auto Continue. 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brsimmtype0 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.1.4
SIMM type on slot0. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brsimmsize0 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.1.5
SIMM size on slot0
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brsimmtype1 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.2.4
SIMM type on slot1. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brsimmsize1 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.2.5
SIMM size on slot1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brsimmtype2 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.3.4
SIMM type on slot2. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brsimmsize2 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.3.5
SIMM size on slot2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brsimmtype3 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.4.4
SIMM type on slot3. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brsimmsize3 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.4.5
SIMM type on slot3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brTBD1 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.3.1.4
unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

brtimeout 1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1.1.1
Job Timeout. 1 to 2147483647(sec)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

brTBD2 1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1.1.5
unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

brpersonality 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.1
Printer Emulation setting. 1:PCL 2:HPGL 4:PS 5:AUTO 6:IBM 7:EPSON 8:HBP
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER pcl(1), hpgl(2), ps(4), auto(5), ibm(6), epson(7), hbp(8)  

brorientation 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.2
Default Paper Orientation. 1:portrait 2:landscape
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4  

brcopies 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.4
Default Copy Pages. 1-999 pages
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..999  

brTBD3 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.6
unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

brresolution 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.8
Default Resolution. 300, 600 or 1200dpi
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1200  

brpageprotect 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.10
Page Protect mode 1:Off 3:Auto 4:Letter 5:Legal 6:A4
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..6  

brlines 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.11
lines per page. 5-128
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..128  

brpaper 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.13
Default Paper size. -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM (ANY) 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 920:3x5(inches) 921:Envelopes Y4 922:Largest envelopes of the West 923:A5L 924:B6JIS 925:16K195x270 926:16K184x260 927:197x273 999:Other 1000:No Casette 1001:Auto
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), prc16k195x270(925), a5l(923), b6JIS(924), prc16k184x260(926), prc16k197x273(927), auto(1001)  

brpapertype 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.22
Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 1nd (default) Tray PaperType
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brpapertype2 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.23
Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 2nd Tray PaperType
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brpapertypeMP 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.26
Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 1nd (default) Tray PaperType
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brdensity 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.1.5
Print Density. -15..15
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -15..15  

brmanualfeed 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.1.4
Manualfeed mode. 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brmpsize 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.1.1
MP Tray paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922)  

brtray1size 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.2.1
Tray1 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922)  

brtray2size 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.3.1
Tray2 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922)  

brtray3size 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.4.1
Tray3 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922)  

brtray4size 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.5.1
Tray4 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922)  

brret 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.6.5
HRC mode. 1:Off 2:Bright 3:Medium 4:Dark
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4  

breconomode 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.6.7
Toner Save mode. 100:Off 0:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

brPrtGeneralEmulationTimeout 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.1
Emulation Timeout. 1- 99(sec)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..99  

brPrtGeneralFeeder 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.2
Default Feeder mode. 0:Auto 1:MP Tray 2:Tray1 3:Tray2 4:Tray3 5:Tray4
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5  

brPrtGeneralPowerSave 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.3
Power Save mode. 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPrtGeneralBuzzer 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.4
Buzzer. 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPrtGeneralColor 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.5
Default Color mode 1:Monochrome 2:Color 3:Auto
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

brPrtGeneralDuplex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.6
Duplex mode 1:Off(Simplex) 2:On(Duplex)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPrtGeneralBinding 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.7
Binding type 3:Short Edge 2:Long Edge
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

brPrtAdvancedPriority 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.1
FX/XL Priority. 1:IBM XL 2:EPSON FX
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPrtAdvancedUseMPTrayFirst 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.2
MP Tray First 1:No 2:Yes
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPrtAdvancedMPTrayFeed 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.3
MP Tray feed mode. 1:Single 2:Continuous
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPrtAdvancedXOffset 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.4
X Offset. -500 to +500 pixel(600dpi)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -500..500  

brPrtAdvancedYOffset 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.5
Y Offset. -500 to +500 pixel(600dpi)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -500..500  

brPrtAdvancedImageCompression 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.6
Image Compression mode. 0:Auto 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPrtAdvancedAutoFormFeed 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.7.1
Auto Formfeed mode. 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPrtAdvancedAutoTimeout 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.7.2
Auto Formfeed timeout. 1-99 (sec)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..99  

brPrtAdvancedFFSuppress 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.8
FF Suppress mode. 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPrtAdvancedTonerLowPrint 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.9
Print mode on Toner Low. 1:Stop 2:Continue
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPrtAdvancedPrintDensity 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.10
Print Density. 1-15
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

brPrtAdvancedInputBuffer 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.11
Input Buffer size. 1-15 blocks
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

brPrtAdvancedLanguage 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.12
1:ENGLISH 2:DANISH 3:DUTCH 4:FINNISH 5:FRENCH 6:GERMAN 7:ITALIAN 8:NORWEGIAN 9:PORTUGUESE 10:SWEDISH 11:SPANISH 12:TURKISH 13:POLISH 14:JAPANESE 15:RUSSIAN 16:CZECH 17:HUNGARIAN 18:ROMANIAN 19:BULGARIAN 20:SLOVAKIAN 21:CHINESE 22:BRAZIL
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER english(1), danish(2), dutch(3), finish(4), french(5), german(6), italian(7), norwegian(8), portuguse(9), swedish(10), spanish(11), turkish(12), polish(13), japanese(14), russian(15), czech(16), hungarian(17), romanian(18), bulgarian(19), slovakian(20), chinese(21), brazil(22)  

brSecurePrintRAMSizeMax 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.13
The Max of Secure print RAM Size
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

brSecurePrintRAMSize 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.14
Secure print RAM Size
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

brPrtAdvancedJamRecovery 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.15
Jam recovery setting
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

brPrtAdvancedSleepIndication 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.16
By enabling the Dimmed option, the status LED is dimmed while the printer is in sleep mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), dimmed(2)  

brPrtAdvancedDestination 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.17
Destination
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER standardOutputTray(1), oct(2), octStack(3)  

brPrtAdvancedLowerLCD 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.18
Lower LCD
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nonePage(1), counter(2), jobName(3)  

brPrtAdvancedAutoOnline 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.19
Auto Online
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

brPrtAdvancedButtonRepeat 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.20
Button Repeat. 0.1-2.0
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..20  

brPrtAdvancedMessageScroll 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.21
Message Scroll. 1-10
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..20  

brPrtAdvancedLCDDensity 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.23
LCDDensity
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brPrtAdvancedErrorBuzzer 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22.1
Error Buzzer
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), normal(2), special(3)  

brPrtAdvancedPanelBuzzer 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22.2
Panel Buzzer
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

brPrtAdvancedBuzzerVolume 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22.3
Buzzer Volume
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER high(1), low(2)  

brSmallPaperSizeMP 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.1
MP Tray Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), noCasette(1000)  

brSmallPaperSize1 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.2
Tray1 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), noCasette(1000)  

brSmallPaperSize2 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.3
Tray2 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), noCasette(1000)  

brSmallPaperSize3 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.4
Tray3 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), noCasette(1000)  

brSmallPaperSize4 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.5
Tray4 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), noCasette(1000)  

brPrtAdvancedTrayPriority 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.1
The value of brTrayPriorityIndex corresponding to the default setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brTrayPriorityCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.2
Maximum number of TrayPriority INDEX.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brTrayPriorityTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3
This table represents TrayPriority setting.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrTrayPriorityEntry

brTrayPriorityEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3.1
A row in the TrayPriority table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrTrayPriorityEntry  

brTrayPriorityIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

brTrayPriorityMember 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3.1.2
The TrayPriority member data. Format: valulen(1byte), value(valulen byte)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brCarbonCopyMode 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.1
Carbon Copy mode setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2), auto(3), parallel(4)  

brCarbonCopies 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.2
The copies setting of Carbon Copy function.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brCarbonCopyTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10
This table represents CarbonCopy setting.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrCarbonCopyEntry

brCarbonCopyEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1
A row in the CarbonCopy table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrCarbonCopyEntry  

brCarbonCopyIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brCarbonCopyTray 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.2
Copy Tray setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tray1(1), tray2(2), tray3(3), tray4(4), mpTray(10), auto(11)  

brCarbonCopyMacro 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.3
Carbon Copy Macro Setting
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

brCarbonCopyMacroID 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.4
Carbon Copy Macro ID Setting
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brMediaFixTray1 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.1
Media Fix setting for tray1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), regular(2), thick(3), thicker(4), transparency(5), thin(6), bond(7), envelopes(8), envThick(9), envThin(10), recycled(11)  

brMediaFixTray2 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.2
Media Fix setting for tray2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), regular(2), thick(3), thicker(4), transparency(5), thin(6), bond(7), envelopes(8), envThick(9), envThin(10), recycled(11)  

brMediaFixTray3 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.3
Media Fix setting for tray3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), regular(2), thick(3), thicker(4), transparency(5), thin(6), bond(7), envelopes(8), envThick(9), envThin(10), recycled(11)  

brMediaFixTray4 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.4
Media Fix setting for tray4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), regular(2), thick(3), thicker(4), transparency(5), thin(6), bond(7), envelopes(8), envThick(9), envThin(10), recycled(11)  

brMediaFixMP 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.10
Media Fix setting for MPtray.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), regular(2), thick(3), thicker(4), transparency(5), thin(6), bond(7), envelopes(8), envThick(9), envThin(10), recycled(11)  

brDirectPrintPaperSize 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.1
Default Paper size. -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM (ANY) 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 920:3x5(inches) 921:Envelopes Y4 922:Largest envelopes of the West 923:A5L 924:B6JIS 925:16K195x270 926:16k184x260 927:16k197x273
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), a5l(923), b6jis(924), prc16k195x270(925), prc16k184x260(926), prc16k197x273(927)  

brDirectPrintMediaType 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.2
Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 1nd (default) Tray PaperType
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brDirectPrintMultipulPage 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brDirectPrintOrientation 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brDirectPrintCollate 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.5
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brDirectPrintOutputColor 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.6
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brDirectPrintPrintQuality 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.7
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brDirectPrintPdfOption 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.8
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brDirectPrintSetting 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.9
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brDirectPrintPdfThumbnailType 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.10
PDF Thumbnail Type 1:AlternativeImage 2:ReductionImage
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER alternativeImage(1), reductionImage(2)  

brPictBridgePaperSize 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.1
Default Paper size. -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM (ANY) 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 920:3x5(inches) 921:Envelopes Y4 922:Largest envelopes of the West
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922)  

brPictBridgeOrientation 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brPictBridgeDateTime 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brPictBridgeFileName 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brPictBridgePrintQuality 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.5
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brPictBridgePrintSetting 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.6
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brColorCalibration 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brColorCalibrationReset 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brAutoRegistRegistrate 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brAutoRegistSetInterval 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brRegistrationPrintChart 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.5
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brRegistrationXMagentaLeft 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.6
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brRegistrationXMagentaRight 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.7
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brRegistrationXCyanLeft 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.8
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brRegistrationXCyanRight 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.9
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brRegistrationXYellowLeft 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.10
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brRegistrationXYellowRight 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.11
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brRegistrationYMagenta 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.12
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brRegistrationYCyan 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.13
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brRegistrationYYellow 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.14
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brPrtMailbox 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.1
Mailbox Installed of not
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPrtMailboxOutbin 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.4
Outbin
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..110  

brPrtMailboxProtectGroup 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.5
Mailbox Protect
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..99  

brPrtAvoidMailboxFullGroup 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.6
Avoid Mailbox Full
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brPrtMailboxProtectTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2
unused
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrPrtMailboxProtectEntry

brPrtMailboxProtectEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2.1
unused
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrPrtMailboxProtectEntry  

brPrtMailboxProtectIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2.1.1
unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

brPrtMailboxProtect 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2.1.2
unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPrtAvoidMailboxFullTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3
unused
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrPrtAvoidMailboxFullEntry

brPrtAvoidMailboxFullEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3.1
unused
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrPrtAvoidMailboxFullEntry  

brPrtAvoidMailboxFullIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3.1.1
unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

brPrtAvoidMailboxFull 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3.1.2
unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPrtFinisher 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.4.1
Finisher type 0:no finisher 1:FS5050 2:FS5100
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

brPrtCatchTray 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.5.1
catch tray Installed or not
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

brPagePCLLeftMargin 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.1
PCL LeftMargin 1270N :0-145 2400Ce :0-176
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brPagePCLRightMargin 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.2
PCL RightMargin 1270N :10-155 2400Ce :10-186
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brPagePCLTopMargin 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.3
PCL TopMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..200  

brPagePCLBottomMargin 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.4
PCL BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..200  

brPagePCLLines 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.5
PCL Form Line 5-128
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..128  

brPagePCLAutoLF 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.1
PCL AutoLF 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPagePCLAutoCR 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.2
PCL AutoCR 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPagePCLAutoWrap 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.3
PCL AutoWrap 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPagePCLAutoSkip 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.4
PCL AutoSkip 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPagePSPrintPSError 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2.1
PrintPSError 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

brPagePSKeepPCLFonts 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2.2
KeepPCLFonts 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

brPagePSCAPTsetting 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2.3
PS CAPT setting 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

brPageGLPen1Size 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.1.1
GL PenSize 1-16
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16  

brPageGLPen1GrayLevel 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.1.2
GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100%
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5  

brPageGLPen2Size 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.2.1
GL PenSize 1-16
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16  

brPageGLPen2GrayLevel 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.2.2
GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100%
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5  

brPageGLPen3Size 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.3.1
GL PenSize 1-16
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16  

brPageGLPen3GrayLevel 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.3.2
GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100%
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5  

brPageGLPen4Size 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.4.1
GL PenSize 1-16
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16  

brPageGLPen4GrayLevel 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.4.2
GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100%
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5  

brPageGLPen5Size 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.5.1
GL PenSize 1-16
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16  

brPageGLPen5GrayLevel 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.5.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5  

brPageGLPen6Size 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.6.1
GL PenSize 1-16
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16  

brPageGLPen6GrayLevel 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.6.2
GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100%
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5  

brPageEPSONLeftMargin 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.1
EPSON LeftMargin 1270N :0-145 2400Ce :0-176
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brPageEPSONRightMargin 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.2
EPSON RightMargin 1270N :10-155 2400Ce :10-186
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brPageEPSONTopMargin 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.3
EPSON TopMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..200  

brPageEPSONBottomMargin 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.4
EPSON BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..200  

brPageEPSONLines 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.5
EPSON Form Line 5-128
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..128  

brPageEPSONAutoLF 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.2.1
EPSON AutoLF 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPageEPSONAutoMask 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.2.5
EPSON AutoMask 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPageIBMLeftMargin 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.1
IBM LeftMargin 1270N :0-145 2400Ce :0-176
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brPageIBMRightMargin 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.2
IBM LeftMargin 1270N :10-155 2400Ce :10-186
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brPageIBMTopMargin 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.3
IBM BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..200  

brPageIBMBottomMargin 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.4
IBM BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..200  

brPageIBMLines 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.5
IBM Form Line 5-128
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..128  

brPageIBMAutoLF 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2.1
IBM AutoLF 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPageIBMAutoCR 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2.2
IBM AutoCR 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brPageIBMAutoMask 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2.5
IBM AutoMask 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brFontName 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.1
unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..99999  

brFontPointSize 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.2
unused(400-99975)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 4..99999  

brFontPitch 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.3
unused(44-9999)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..9999  

brFontSymbolSet 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.4
unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..99999  

brPanelResetUser 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.1.1
User Reset
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

brPanelResetFactory 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.1.2
Factory Reset
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

brPanelTestConfiguration 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.1
Print Config page
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

brPanelTestFontList 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.2
Print Fonts list
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

brPanelTestTestPage 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.3
Print Test page
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

brPanelTestDemoPage 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.4
Print Demo page 0:Enable Print Demo page 1:Disable Print Demo page
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

brPanelLockPasswd 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.1
unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

brPanelLock 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.2
The state of panel lock
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

brPanelLockOn 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.3
Panel Lock by setting a password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brPanelLockOff 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.4
Panel Lock is canceled by inputting a password..
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brPanelKeyOnline 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.1
Press Online Key
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brPanelKeyFormFeed 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.2
Press FormFeed Key
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brPanelKeyContinue 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.3
Press Countinue Key
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brPanelKeyMode 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.4
unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brPanelKeyGo 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.5
Press Go Key
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brPanelKeyJobCancel 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.6
Press JobCancel Key
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brPanelKeyReprint 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.7
Press Reprint Key
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brPanelKeySecure 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.8
Press SecurePrint Key
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brLCDMode1 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.1
LCD Display Mode. 1:fix 2:blink 3:scroll
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fix(1), blink(2), scroll(3), blinkScroll(4)  

brLCDString1 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.2
LCD Display String of first line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brLCDMode2 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.3
LCD Display Mode. 1:fix 2:blink 3:scroll
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fix(1), blink(2), scroll(3)  

brLCDString2 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.4
LCD Display String of second line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brLCDString16fix 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.5
LCD Display String of 16fix.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

brBackLightColor 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.6
LCD Display Mode. 0:Off 1:Green 2:Orange 3:Red
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER green(1), orange(2), red(3), notsupport(255)  

brLCDMode3 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.7
LCD Display Mode. 1:fix 2:blink 3:scroll
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fix(1), blink(2), scroll(3), blinkScroll(4)  

brLCDString3 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.8
LCD Display String of first line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brLCDMode4 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.9
LCD Display Mode. 1:fix 2:blink 3:scroll
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fix(1), blink(2), scroll(3), blinkScroll(4)  

brLCDString4 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.10
LCD Display String of first line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brLCDMode5 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.11
LCD Display Mode. 1:fix 2:blink 3:scroll
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fix(1), blink(2), scroll(3), blinkScroll(4)  

brLCDString5 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.12
LCD Display String of first line.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brLCDContrast 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.13
This value adjusts the contrast of the LCD Display.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brInfoSerialNumber 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.1
Serial number of printer
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brInfoType 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.2
unused
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

brInfoUpperMIBVer 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.3.1
unused (upper digit of the MIB version)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

brInfoLowerMIBVer 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.3.2
unused (lower digit of the MIB version)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

brInfoStatus 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.4
Status message ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

brInfoNetVerUpStatus 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.5
unused
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

brInfoPrinterUStatus 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.6
Status ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brInfoPConSupported 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.7
BRPCon support 0:not supported 1:supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brInfoMaintenance 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.8
Maintenance info.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brInfoModelNumber 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.9
Printer Model ID 4:2400Ce 5:3400CN 6:3260 8:2460 9:2600cn 11:3450cn 13:am 14:zlhe 15:zl2 16:jigen 17:aml 18:l4c 19: ALL 20: AL LED 21: AL LCD 22: HL-4040CN 23: ALL China 24: HL-4050CDN/HL-4070CDW 25: ALL2 101:ZL MFC FB type 102:ZL MFC Normal type 103:BH MFC Nornal type 104:BH MFC FB type 105:ZL MFC with HS 106:BH MFC with HS 107: ZL2FB 108: BHL2MFC 109: BHL2FB 110: ZL2MFC 111: Mini2 112: Mini2 ADF 113: BH3FB 114: BH3MFC 115: ALL-MFC 116: ALL-FB 117: SLow4C 118: mini2eColorLCD, 119: mini2eColorLCD ADF 120: AL-FB 121: DCP540 122: DCP750 123: MFC440 124: MFC665 125: MFC850 126: MFC860 127: MFC5460 128: MFC5860 129: DCP6150 130: DCP6260 131: MFC6460 132: MFC6860 133: DCP770 134: MFC480 135: AC-FB CIS 136: AC-FB CCD 137: MFC7440 138: MFC7840 139: MFC5490 140: MFC5890 141: MFC6490 142: DCP6690 143: MFC6890 144: DCP585 145: MFC490 146: MFC790 147: MFC990 148: MFC930
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hl2400ce(4), hl3400CN(5), hl3260(6), hl2460(8), hl2600cn(9), hl3450cn(11), am(13), zlhe(14), zl2(15), jigen(16), aml(17), l4c(18), all(19), alLedModel(20), alLcdModel(21), hl4040(22), allchn(23), hl4050hl4070(24), all2(25), zlfb(101), zl(102), bh(103), bhfb(104), zlhs(105), bhhs(106), zl2fb(107), bhl2mfc(108), bhl2fb(109), zl2mfc(110), mini2(111), mini2adf(112), bh3fb(113), bh3mfc(114), allmfc(115), allfb(116), slow4c(117), mini2eColorLCD(118), mini2eColorLCDADF(119), alfb(120), dcp540(121), dcp750(122), mfc440(123), mfc665(124), mfc850(125), mfc860(126), mfc5460(127), mfc5860(128), dcp6150(129), dcp6260(130), dcp6460(131), dcp6860(132), dcp770(133), mfc480(134), acfbCIS(135), acfbCCD(136), mfc7440(137), mfc7840(138), mfc5490(139), mfc5890(140), mfc6490(141), dcp6690(142), mfc6890(143), dcp585(144), mfc490(145), mfc790(146), mfc990(147), mfc930(148)  

brInfoCounter 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.10
Page counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brInfoNextCare 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.11
Remaining life info.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brInfoHDDSlot1 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.12
Card Slot1 status 1:complete 2:IO error 3:memory error 4:not found 5:no device 6:no file(format)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..6  

brInfoHDDSlot2 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.13
Card Slot2 status 1:complete 2:IO error 3:memory error 4:not found 5:no device 6:no file(format)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..6  

brInfoHDDInternal 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.14
Internal HDD info. 1:complete 2:IO error 3:memory error 4:not found 5:no device 6:no file(format)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..6  

brInfoHDDSize 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.15
unused
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brInfoSolutionsCenterURL 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.16
Brother Solutions Center's URL
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

brInfoDeviceRomVersion 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.17
The device rom version
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

brInfoCoverage 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.18
Coverage info.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brInfoEstimatedPagesRemaining 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.19
Estimated pages remaining info.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

brInfoReplaceCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.20
Replace count info.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brInfoJamCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.21
Jam count info.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brInfoJamCountClear 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.22
Jam count Clear.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brInfoReplaceTime 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.23
Replace count time info.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brInfoDeviceSubRomVersion 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.24
The PCL/PS ROM Version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brErrorHistoryCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.1
Maximum number of Error History.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brErrorHistoryTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2
This table represents Error History.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrErrorHistoryEntry

brErrorHistoryEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2.1
A row in the ErrorHistory table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrErrorHistoryEntry  

brErrorHistoryIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2.1.1
A unique value for the error history.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brErrorHistoryDescription 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2.1.2
The ErrorHistory Description.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brErrorHistoryAllClear 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.3
All clear Error History.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brCommunicationErrorHistoryCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.11
Maximum number of Communication Error History.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brCommunicationErrorHistoryTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12
This table represents Communication Error History.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrCommunicationErrorHistoryEntry

brCommunicationErrorHistoryEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12.1
A row in the Communication ErrorHistory table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrCommunicationErrorHistoryEntry  

brCommunicationErrorHistoryIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12.1.1
A unique value for the Communication error history.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brCommunicationErrorHistoryDescription 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12.1.2
The Communication Error History Description.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brPrintPagesTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1
This table represents Print Pages.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrPrintPagesEntry

brPrintPagesEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1
A row in the PrintPages table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrPrintPagesEntry  

brPrintPagesIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1.1
A unique value for the print pages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brPrintPagesPaperSize 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1.2
The paper size of print pages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER executive(1), letter(2), legal(3), a6(24), a5(25), a4(26), a3ISO(27), b5JIS(45), b4JIS(46), monarch(80), com10(81), dl(90), c5(91), b6(99), b5(100), ledger(890), a3PLUS(891), letterShortEdge(892), a4ShortEdge(893), a4LONG(894), executiveShortEdge(895), b5ISOShortEdge(896), custom(897), a4Letter(898), b5Executive(899), envelopes(900), dll(901), hagaki(902), folio(903), organaizerJ(904), organaizerK(905), organaizerL(906), organaizerM(907), userdefined(908), legalA4Long(909), b6A5A6(910), detectsensor(911), inches3x5(920), envelopesY4(921), largestEnvelopesTheWest(922), otherPage(999), b6JIS(924)  

brPrintPages 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1.3
The count of Print pages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

brPrintPagesMediaPlaceTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11
This table represents Print Pages of Media Place.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrPrintPagesMediaPlaceEntry

brPrintPagesMediaPlaceEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1
A row in the PrintPages Media Place table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrPrintPagesMediaPlaceEntry  

brPrintPagesMediaPlaceIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1.1
A unique value for the print pages of media place.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brPrintPagesMediaPlaceType 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1.2
The place of media.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER face(1), back(2)  

brPrintPagesMediaPlaceCounter 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1.3
The count of Print pages of media place.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

brPrintPagesFuncTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21
This table represents Print Pages of each function.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrPrintPagesFuncEntry

brPrintPagesFuncEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1
A row in the PrintPages Func table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrPrintPagesFuncEntry  

brPrintPagesFuncIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1.1
A unique value for the print pages of each function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brPrintPagesFuncType 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1.2
The kind of function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pcPrinttotal(1), faxtotal(2), copytotal(3), copycolor(4), pcPrintcolor(5), faxcolor(6), pcPrintmono(7), faxmono(8), copymono(9)  

brPrintPagesFuncCounter 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1.3
The count of Print pages of the function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

brPrintPagesPaperTypeTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31
This table represents Print Pages of Paper Type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrPrintPagesPaperTypeEntry

brPrintPagesPaperTypeEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1
A row in the PrintPages Paper Type table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrPrintPagesPaperTypeEntry  

brPrintPagesPaperTypeIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1.1
A unique value for the print pages of paper type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32767  

brPrintPagesPaperTypeType 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1.2
The type of paper.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER regularthinrecycled(12), transparency(3), thickthickerbond(13), envelopesenvthickenvthin(14)  

brPrintPagesPaperTypeCounter 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1.3
The count of Print pages of paper type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

brCapabilityCopiesMax 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.1.1
The maximum value of copies
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brCapabilityCopiesMin 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.1.2
The minimum value of copies
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brCapabilityOrientationCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.1
The number of support of orientation
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brCapabilityOrientationTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2
This table represents capability of orientation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrCapabilityOrientationEntry

brCapabilityOrientationEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2.1
A row in the capability of orientation table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrCapabilityOrientationEntry  

brCapabilityOrientationIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2.1.1
A unique value for the capability of orientation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brCapabilityOrientationName 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2.1.2
The name of orientation currently supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

brCapabilityPaperCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.1
The number of kinds of the paper currently supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brCapabilityPaperTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2
This table represents capability of paper.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrCapabilityPaperEntry

brCapabilityPaperEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2.1
A row in the capability of paper table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrCapabilityPaperEntry  

brCapabilityPaperIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2.1.1
A unique value for the capability of paper.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brCapabilityPaperName 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2.1.2
The name of paper currently supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

brCapabilityMediatypeCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.1
The number of kinds of the mediatype currently supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brCapabilityMediatypeTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2
This table represents capability of mediatype.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrCapabilityMediatypeEntry

brCapabilityMediatypeEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2.1
A row in the capability of mediatype table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrCapabilityMediatypeEntry  

brCapabilityMediatypeIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2.1.1
A unique value for the capability of mediatype.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brCapabilityMediatypeName 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2.1.2
The name of mediatype currently supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

brCapabilityResolutionCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.1
The number of kinds of the resolution currently supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brCapabilityResolutionTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2
This table represents capability of resolution.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrCapabilityResolutionEntry

brCapabilityResolutionEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2.1
A row in the capability of resolution table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrCapabilityResolutionEntry  

brCapabilityResolutionIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2.1.1
A unique value for the capability of resolution.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brCapabilityResolution 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2.1.2
The value of resolution currently supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brPfKitIndexCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.1
Maximum number of PF kit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brPfKitTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2
This table represents PF kit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrPfKitEntry

brPfKitEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1
A row in the PfKit table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrPfKitEntry  

brPfKitIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1.1
A unique value for the PF kit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brPfKitType 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1.2
The PF kit ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pfkit1(1), pfkit2(2), pfkit3(3), pfkit4(4), pfkitmp(10), pfkitdx(20)  

brPfKitCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1.3
Counter of the PF kit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

brScanCountIndexCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.1
Maximum number of Scan place.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brScanCountTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2
This table represents scan count.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrScanCountEntry

brScanCountEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1
A row in the ScanCount table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrScanCountEntry  

brScanCountIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1.1
A unique value for the scan count place.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brScanCountType 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1.2
The scan place ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER adf(1), fb(2), adfdx(3)  

brScanCountCounter 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1.3
Counter of the scan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

brStatusSleep 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.6.1
Sleeping status 0:ready 1:sleep
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

brSecretMPRetry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.1
unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brSecretReprint 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.2
Secret Reprint mode 0:Off 111:On 222:Job
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brFontSetting 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.3
Font Setting 0:Brother Font 1:Agfa Font
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brFontSwitchOn 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.4
Switch of Agfa Font On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..999999  

brFontSwitchOff 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.5
Switch of Agfa Font Off
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..999999  

brClockFuncTimeStyle 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.1
Time format 0:YMD 1:MDY 2:DMY
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brClockFuncSummerTime 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.2
Summer time 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brClockFuncTimeZone 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.3
TimeZone
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -24..24  

brClockFuncZoneSet 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.4
TimeZone enable 1:Off 2:On
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brFindPort 1.3.6.1.4.1.2435.2.4.3.13.10.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

brFindTime 1.3.6.1.4.1.2435.2.4.3.13.10.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brAdminCapability 1.3.6.1.4.1.2435.2.4.3.1.99.1
AdminCapability
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brUserPasswordVerify 1.3.6.1.4.1.2435.2.4.3.1.100.1
Submit the print server's user password for verification. An error will be returned if the password is incorrect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

brUserPassword 1.3.6.1.4.1.2435.2.4.3.1.100.2
Set the print server's user password value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

brpsVerifyPhysAddress 1.3.6.1.4.1.2435.2.4.3.1.101.1
For verify physical address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

brBasicSettingConfigured 1.3.6.1.4.1.2435.2.4.3.1.1.1
This value indicates that the basic setting is configured or not. The condition entry of this value is model dependent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unconfigured(1), configured(2)  

brLPDBannerPage 1.3.6.1.4.1.2435.2.4.3.6.99.1.1
LPR banner page 0: disabled. 1: enabled. 2: force to print.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brENetModeSupported 1.3.6.1.4.1.2435.2.4.3.7.99.1.1
ENet Mode 0:not supported 1:supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brENetMode 1.3.6.1.4.1.2435.2.4.3.7.99.1.2
ENet Mode 0:Auto 1:FD100B 2:100Base 3:FD10B 4:10BASE
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brDNSSupported 1.3.6.1.4.1.2435.2.4.3.99.1.1
DNS resolver 0:not supported 1:supported This is the obsolete MIB that is not currently used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brPrimaryDNSIP 1.3.6.1.4.1.2435.2.4.3.99.1.2
Primary DNS IP Address. This is the obsolete MIB that is not currently used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brSecondaryDNSIP 1.3.6.1.4.1.2435.2.4.3.99.1.3
Secondary DNS IP Address This is the obsolete MIB that is not currently used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brDNSIPSetup 1.3.6.1.4.1.2435.2.4.3.99.1.4
DNS mode 1:static 2:auto
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER static(1), auto(2)  

brTCPIPConnectTime 1.3.6.1.4.1.2435.2.4.3.99.1.5
TCP/IP connect time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brAdvancedDNSSupported 1.3.6.1.4.1.2435.2.4.3.99.1.6
DNS resolver 0:not supported 1:supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brPrimaryDNSIPAddress 1.3.6.1.4.1.2435.2.4.3.99.1.7
Primary DNS IP Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brSecondaryDNSIPAddress 1.3.6.1.4.1.2435.2.4.3.99.1.8
Secondary DNS IP Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brPOP3ServerName 1.3.6.1.4.1.2435.2.4.3.99.1.9
The FQDN name of the POP3 server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

brSMTPServerName 1.3.6.1.4.1.2435.2.4.3.99.1.10
The FQDN name of the SMTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

brPushStatusSupported 1.3.6.1.4.1.2435.2.4.3.99.2.1
Notification 0:not supported 1:supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brPriMailAddress 1.3.6.1.4.1.2435.2.4.3.99.2.2.1
Primary Mail Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brPriError 1.3.6.1.4.1.2435.2.4.3.99.2.2.2
Primary Error
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

brSecMailAddress 1.3.6.1.4.1.2435.2.4.3.99.2.3.1
Secondary Mail Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brSecError 1.3.6.1.4.1.2435.2.4.3.99.2.3.2
Secondary Error
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

brNotificationCount 1.3.6.1.4.1.2435.2.4.3.99.2.4
Maximum number of Notification Method.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..127  

brNotificationTable 1.3.6.1.4.1.2435.2.4.3.99.2.5
This table represents Notification Method.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrNotificationEntry

brNotificationEntry 1.3.6.1.4.1.2435.2.4.3.99.2.5.1
A row in the Notification table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrNotificationEntry  

brNotificationIndex 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brNotificationAddress 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.2
The Notification Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brNotificationStatusGroup 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.3
The Notification Status group
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brNotificationShowURLInfo 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.4
The setting of show URL infomation at Notification mail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brNotificationErrorRule 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.5
The setting of sending requirements for Notification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brNotificationRestoration 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.6
The setting of Restoration Notification mail
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

brPrintersEmailaddress 1.3.6.1.4.1.2435.2.4.3.99.2.6
The Printers Email Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brNotificationVersion 1.3.6.1.4.1.2435.2.4.3.99.2.7
The version of Notification
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brShowIPAddressInfo 1.3.6.1.4.1.2435.2.4.3.99.2.8
The setting of show IP address infomation at Notification mail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

brNotificationRuleTable 1.3.6.1.4.1.2435.2.4.3.99.2.50
This table represents Notification Method.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrNotificationRuleEntry

brNotificationRuleEntry 1.3.6.1.4.1.2435.2.4.3.99.2.50.1
A row in the Notification rule table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrNotificationRuleEntry  

brNotificationRuleIndex 1.3.6.1.4.1.2435.2.4.3.99.2.50.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brNotificationStatusID 1.3.6.1.4.1.2435.2.4.3.99.2.50.1.2
The Notification Status group ID
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER coverOpen(1), jam(2), tonerLow(3), tonerEmpty(4), userConsumableWarning(5), userConsumableError(6), servicemanConsumableWarning(7), servicemanConsumableError(8), changeDrum(9), memoryFull(10), inputMediaError(11), outputFull(12), notInstalled(13), machineError(14), otherErrors(15)  

brNotificationMainRule 1.3.6.1.4.1.2435.2.4.3.99.2.50.1.3
The main rule of Notification setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), everytime(2), times(3), minutes(4)  

brNotificationRuleValue 1.3.6.1.4.1.2435.2.4.3.99.2.50.1.4
The value of Notification setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brPJLInfoOptionsTable 1.3.6.1.4.1.2435.2.4.3.99.3.1.1
This table represents PJLInfoOptions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrPJLInfoOptionsEntry

brPJLInfoOptionsEntry 1.3.6.1.4.1.2435.2.4.3.99.3.1.1.1
A row in the PJLInfoOptions table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrPJLInfoOptionsEntry  

brPJLInfoOptionsIndex 1.3.6.1.4.1.2435.2.4.3.99.3.1.1.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brPJLInfoOptions 1.3.6.1.4.1.2435.2.4.3.99.3.1.1.1.2
The PJLInfoOptions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

brPJLInfoIntrayconfigTable 1.3.6.1.4.1.2435.2.4.3.99.3.1.2
This table represents PJLInfoIntrayconfig.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrPJLInfoIntrayconfigEntry

brPJLInfoIntrayconfigEntry 1.3.6.1.4.1.2435.2.4.3.99.3.1.2.1
A row in the PJLInfoIntrayconfig table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrPJLInfoIntrayconfigEntry  

brPJLInfoIntrayconfigIndex 1.3.6.1.4.1.2435.2.4.3.99.3.1.2.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brPJLInfoIntrayconfig 1.3.6.1.4.1.2435.2.4.3.99.3.1.2.1.2
The PJLInfoIntrayconfig.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

brPJLInfoOuttrayconfigTable 1.3.6.1.4.1.2435.2.4.3.99.3.1.3
This table represents PJLInfoOuttrayconfig.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrPJLInfoOuttrayconfigEntry

brPJLInfoOuttrayconfigEntry 1.3.6.1.4.1.2435.2.4.3.99.3.1.3.1
A row in the PJLInfoOuttrayconfig table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrPJLInfoOuttrayconfigEntry  

brPJLInfoOuttrayconfigIndex 1.3.6.1.4.1.2435.2.4.3.99.3.1.3.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brPJLInfoOuttrayconfig 1.3.6.1.4.1.2435.2.4.3.99.3.1.3.1.2
The PJLInfoOuttrayconfig.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

brPJLInfoDXconfigTable 1.3.6.1.4.1.2435.2.4.3.99.3.1.4
This table represents PJLInfoDXconfig.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrPJLInfoDXconfigEntry

brPJLInfoDXconfigEntry 1.3.6.1.4.1.2435.2.4.3.99.3.1.4.1
A row in the PJLInfoDXconfig table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrPJLInfoDXconfigEntry  

brPJLInfoDXconfigIndex 1.3.6.1.4.1.2435.2.4.3.99.3.1.4.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brPJLInfoDXconfig 1.3.6.1.4.1.2435.2.4.3.99.3.1.4.1.2
The PJLInfoDXconfig.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

brPJLInfoStorageconfigTable 1.3.6.1.4.1.2435.2.4.3.99.3.1.5
This table represents PJLInfoStorageconfig.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrPJLInfoStorageconfigEntry

brPJLInfoStorageconfigEntry 1.3.6.1.4.1.2435.2.4.3.99.3.1.5.1
A row in the PJLInfoStorageconfig table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrPJLInfoStorageconfigEntry  

brPJLInfoStorageconfigIndex 1.3.6.1.4.1.2435.2.4.3.99.3.1.5.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brPJLInfoStorageconfig 1.3.6.1.4.1.2435.2.4.3.99.3.1.5.1.2
The PJLInfoStorageconfig.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

brEmailReportsSupported 1.3.6.1.4.1.2435.2.4.3.99.4.1
E-mail reports 0:not supported 1:supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brEmailReportsCount 1.3.6.1.4.1.2435.2.4.3.99.4.2
The number of Administrator for E-mail reports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brEmailReportsTable 1.3.6.1.4.1.2435.2.4.3.99.4.11
This table represents E-mail reports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrEmailReportsEntry

brEmailReportsEntry 1.3.6.1.4.1.2435.2.4.3.99.4.11.1
A row in the BrEmailReportsEntry table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrEmailReportsEntry  

brEmailReportsIndex 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

brEmailReportsAddress 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.2
The E-mail address of Administrator for E-mail reports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..60)  

brEmailReportsFrequency 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.3
The frequency of sending E-mail reports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER daily(1), weekly(2), monthly(3)  

brEmailReportsTime 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.4
The time setting for E-mail reports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brEmailReportsWeek 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.5
The setting of day of the week for E-mail reports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sunday(1), monday(2), tuesday(3), wednesday(4), thursday(5), friday(6), saturday(7)  

brEmailReportsDate 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.6
The setting of day for E-mail reports when real time clock exists.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..31  

brEmailReportsSendReportNow 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.7
The setting of Send Report Now function for E-mail reports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

brEmailReportsSendReportatPowerOn 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.8
The setting of Send Report at PowerOn for E-mail reports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

brEmailReportsNoRTCFrequency 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.9
The setting of day for E-mail reports when real time clock does not exists.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..30  

brEmailReportsReportFormat 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.10
The setting of ReportFormat for E-mail reports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER plaintext(1), xml(2)  

brpsNodeName 1.3.6.1.4.1.2435.2.4.3.1240.1.1
The node name of this print server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

brpsSerialNumber 1.3.6.1.4.1.2435.2.4.3.1240.1.2
The serial number of this print server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

brpsHardwareType 1.3.6.1.4.1.2435.2.4.3.1240.1.3
Hardware type of the print server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

brpsMainRevision 1.3.6.1.4.1.2435.2.4.3.1240.1.4
Revision level of the Print Server firmware suitable for display. This object may be read but not written.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..5)  

brpsBootRevision 1.3.6.1.4.1.2435.2.4.3.1240.1.5
Revision level of the boot firmware (if applicable) suitable for display. This object may be read but not written.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..5)  

brpsPasswordVerify 1.3.6.1.4.1.2435.2.4.3.1240.1.6
Submit the print server's password for verification. An error will be returned if the password is incorrect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

brpsPassword 1.3.6.1.4.1.2435.2.4.3.1240.1.7
Set the print server's password value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

brpsMIBVersion 1.3.6.1.4.1.2435.2.4.3.1240.1.8
Revision level of the private MIB implemented by the device. For example: 1.0 This object may be read but not written.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..5)  

brpsOEMString 1.3.6.1.4.1.2435.2.4.3.1240.1.9
OEM string setting for the print server. This object may be read but not written.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(3)  

brpsMIBMajor 1.3.6.1.4.1.2435.2.4.3.1240.1.10
MIB major version number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..9  

brpsMIBMinor 1.3.6.1.4.1.2435.2.4.3.1240.1.11
MIB minor version number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..99  

brSupportedInfo 1.3.6.1.4.1.2435.2.4.3.1240.1.200
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

brpsServerDescription 1.3.6.1.4.1.2435.2.4.3.1240.1.12
Product name of print server. For example: NC-3100h This object may be read but not written.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

brpsEnetMode 1.3.6.1.4.1.2435.2.4.3.1240.1.13
Ethernet type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4  

brpsFlashROMSize 1.3.6.1.4.1.2435.2.4.3.1240.1.14
Flash ROM Size of print server (MBytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

brpsSNMPGetCommunity 1.3.6.1.4.1.2435.2.4.3.1240.1.15
SNMP Get Community Name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

brpsSNMPJetAdmin 1.3.6.1.4.1.2435.2.4.3.1240.1.16
0 indicates the JetAdmin compatibility mode is not enabled. 1 indicates JetAdmin compatibility mode is enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsSNMPSetCommunity1 1.3.6.1.4.1.2435.2.4.3.1240.1.17
SNMP Set Community Name #1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

brpsSNMPSetCommunity2 1.3.6.1.4.1.2435.2.4.3.1240.1.18
SNMP Set Community Name #2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

brpsTestPage 1.3.6.1.4.1.2435.2.4.3.1240.2.1
Setting any value generates a test page on all ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

brpsSetDefault 1.3.6.1.4.1.2435.2.4.3.1240.2.2
Setting the value 5AA5h (23205) resets all parameters to their factory default value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

brpsReset 1.3.6.1.4.1.2435.2.4.3.1240.2.3
Setting the value 55AAh (21930) causes the print server to perform a soft reset.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

brpsProtectModeEnable 1.3.6.1.4.1.2435.2.4.3.1240.2.4
0 indicates the protect mode is not enabled. 1 indicates protect mode is enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsProtectPassword 1.3.6.1.4.1.2435.2.4.3.1240.2.5
protect password.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

brpsPortCount 1.3.6.1.4.1.2435.2.4.3.1240.3.1
Number of ports on this print server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32  

brpsPortInfoTable 1.3.6.1.4.1.2435.2.4.3.1240.3.2
This table represents the attributes of a port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrpsPortInfoEntry

brpsPortInfoEntry 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1
A row in the port table. Rows cannot be created or deleted via direct SNMP operations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrpsPortInfoEntry  

brpsPortIndex 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.1
The port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

brpsPortName 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.2
The port name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

brpsPortType 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.3
Type of port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER parallel(1), serial(2)  

brpsPortStatus 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.4
The port status as a 32 bit integer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

brpsPortStatusString 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.5
The port status description. Reflects the printer's front panel display on internal print server interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

brpsPortProtocol 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.6
Protocol currently printing on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..12  

brpsPortQueueSize 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.7
Number of protocols waiting to print on this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsPortDescriptionString 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.8
The port description. Reflects the device ID of the printer connected to the port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..50)  

brpsPortInfoString 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.9
The port status information. More information about the port status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..255)  

brpsPortHTTPExtensions 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.10
0 indicates the printer on this port does not support HTTP, 1 indicates that the printer does support HTTP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsPortSNMPExtensions 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.11
0 indicates the printer on this port does not support SNMP, 1 indicates that the printer does support SNMP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsPortAttribute 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.12
Port attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

brpsPortBinaryMode 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.13
Port binary mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

brpsPortInhibitDatagramSupport 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.14
0 indicates the inhibit datagram is not supported. 1 indicates the inhibit datagram is supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsServiceCount 1.3.6.1.4.1.2435.2.4.3.1240.4.1
Number of services on this print server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

brpsServiceInfoTable 1.3.6.1.4.1.2435.2.4.3.1240.4.2
This table represents the attributes of a service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrpsServiceInfoEntry

brpsServiceInfoEntry 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1
A row in the services table. Rows cannot be created or deleted via direct SNMP operations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrpsServiceInfoEntry  

brpsServiceIndex 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.1
The service number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

brpsServiceName 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.2
The service name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

brpsServicePort 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.3
The port number assigned to this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

brpsServiceFilter 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.4
Filter number assigned to this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brpsServiceBOT 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.5
Beginning of text string number assigned to this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brpsServiceEOT 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.6
End of text string number assigned to this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brpsServiceMatch 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.7
Match string number assigned to this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brpsServiceReplace 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.8
Replace string number assigned to this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brpsServiceTCPPort 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.9
TCP Port number assigned to this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

brpsServiceNDSTree 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.10
The NDS Tree.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..48)  

brpsServiceNDSContext 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.11
The NDS Context in Unicode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

brpsServiceVines 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.12
The Vines StreetTalk name for this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..48)  

brpsServiceObsolete 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.13
Obsolete parameter that is no longer used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..127  

brpsServiceNetwareServerCount 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.14
The number of Netware servers enabled on this service. Modifying the value will truncate the server list to the specified number of servers. If the value set is greater than the number of servers currently on the list, then the list will be unchanged.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..127  

brpsServiceReceiveOnly 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.15
When enabled, the service will only receive data, any printer responses will be discarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsServiceTCPQueued 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.16
When enabled, the raw TCP connections to the port will be queued while waiting for the port to become available
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsServiceProtocolLAT 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.17
When enabled, the LAT protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsServiceProtocolTCPIP 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.18
When enabled, the TCP/IP protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsServiceProtocolNetware 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.19
When enabled, the Netware protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsServiceProtocolAppleTalk 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.20
When enabled, the AppleTalk protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsServiceProtocolBanyan 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.21
When enabled, the Banyan protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsServiceProtocolDLC 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.22
When enabled, the DLC protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsServiceProtocolNetBEUI 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.23
When enabled, the NetBEUI protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsServiceNetwareServerMode 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.24
Netware mode for this service. 0 = Queue Server, 1 = Remote Printer
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsServiceNetwareRemotePrinterNum 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.25
Remote Printer Number for this service
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brpsServiceProtocolIPP 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.26
When enabled, the IPP protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsServiceAppleTalkType 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.27
AppleTalk type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

brpsServiceStringLimit 1.3.6.1.4.1.2435.2.4.3.1240.4.3
Maximum number of service strings supported by the print server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..127  

brpsServiceStringInfoTable 1.3.6.1.4.1.2435.2.4.3.1240.4.4
This table represents the service BOT/EOT/MATCH/REPLACE strings defined.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrpsServiceStringInfoEntry

brpsServiceStringInfoEntry 1.3.6.1.4.1.2435.2.4.3.1240.4.4.1
A row in the service string table. Rows cannot be created or deleted via direct SNMP operations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrpsServiceStringInfoEntry  

brpsServiceStringIndex 1.3.6.1.4.1.2435.2.4.3.1240.4.4.1.1
The string number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

brpsServiceString 1.3.6.1.4.1.2435.2.4.3.1240.4.4.1.2
The character string definition suitable for displaying.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

brpsServiceStringCount 1.3.6.1.4.1.2435.2.4.3.1240.4.5
Number of service strings currently defined on the print server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsServiceFilterCount 1.3.6.1.4.1.2435.2.4.3.1240.4.6
Number of service filters implemented by the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsLATSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.1.1
0 indicates the LAT protocol is not supported. 1 indicates LAT support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsLATEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.1.2
0 indicates the LAT protocol is not enabled. 1 indicates that the LAT protocol is enabled. Writing a non-zero value will enable the LAT protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsLATCircuitTimer 1.3.6.1.4.1.2435.2.4.3.1240.5.1.3
Minimum time (in milliseconds) between transmissions to the host. The default of 10 normally provides the best performance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..499  

brpsLATKeepAliveTimer 1.3.6.1.4.1.2435.2.4.3.1240.5.1.4
How often in seconds a packet is transmitted to keep a connection alive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..60000  

brpsLATReceiveBufferMax 1.3.6.1.4.1.2435.2.4.3.1240.5.1.5
LAT receive buffer max size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5  

brpsLATTransmitBufferMax 1.3.6.1.4.1.2435.2.4.3.1240.5.1.6
LAT transmit buffer max size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5  

brpsLATTimeout 1.3.6.1.4.1.2435.2.4.3.1240.5.1.7
LAT inactivity timeout (sec).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..499  

brpsLATGroup 1.3.6.1.4.1.2435.2.4.3.1240.5.1.8
LAT group membership (mm-[nn]).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..7)  

brpsTCPIPSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.2.1
0 indicates the TCP/IP protocol is not supported. 1 indicates TCP/IP support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsTCPIPEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.2.2
0 indicates the TCP/IP protocol is not enabled. 1 indicates that the TCP/IP protocol is enabled. Writing a non-zero value will enable the TCP/IP protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsTCPIPAddress 1.3.6.1.4.1.2435.2.4.3.1240.5.2.3
IP Address assigned to the print server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brpsTCPIPSubnetMask 1.3.6.1.4.1.2435.2.4.3.1240.5.2.4
Subnet mask assigned to the print server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brpsTCPIPGateway 1.3.6.1.4.1.2435.2.4.3.1240.5.2.5
Gateway/Router address assigned to the print server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brpsTCPIPMethod 1.3.6.1.4.1.2435.2.4.3.1240.5.2.6
Method used to determine the IP Address. AUTO tries all protocols. STATIC uses the configured address. DHCP, BOOTP, and RARP use only that protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

brpsTCPIPTimeout 1.3.6.1.4.1.2435.2.4.3.1240.5.2.7
Timeout used for LPD connections.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

brpsTCPIPBootTries 1.3.6.1.4.1.2435.2.4.3.1240.5.2.8
Number of attempts to use BOOTP, RARP, and DHCP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

brpsTCPIPMaxWindow 1.3.6.1.4.1.2435.2.4.3.1240.5.2.9
Maximum window size for TCP connections. Due to resource limitations setting the window to values greater than 10240 is not recommended.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1500..65535  

brpsTCPIPRARPNoSubnet 1.3.6.1.4.1.2435.2.4.3.1240.5.2.10
If enabled, do not set the subnet mask based on the RARP response.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsTCPIPRARPNoGateway 1.3.6.1.4.1.2435.2.4.3.1240.5.2.11
If enabled, do not set the gateway/router address based on the RARP response.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsTCPIPUpdate 1.3.6.1.4.1.2435.2.4.3.1240.5.2.12
Hardware MAC address to be updated. This value is write only. Will read back as zeros.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

brpsTCPIPBanner 1.3.6.1.4.1.2435.2.4.3.1240.5.2.13
0 indicates the LPR banner print is not enabled. 1 indicates that the LPR banner print is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsTCPIPFastTimeoutEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.2.14
0 indicates the fast timeout is not enabled. 1 indicates that the fast timeout is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsTCPIPLPRRetryEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.2.15
0 indicates the LPR print retry is not enabled. 1 indicates that the LPR print retry is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsTCPIPUseMethod 1.3.6.1.4.1.2435.2.4.3.1240.5.2.16
Method type that used set up TCP/IP configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

brpsTCPIPMethodServer 1.3.6.1.4.1.2435.2.4.3.1240.5.2.17
If TCP/IP configuration is setted up by any protocol server, this entry indicates the IP address of the server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brpsTCPIPAccessTable 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18
This table represents the list of IP address of node that has parmittion for access.Up to 16 Netware addresses can be enabled.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrpsTCPIPAccessEntry

brpsTCPIPAccessEntry 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1
A row in the TCP/IP access table. Rows cannot be created or deleted via direct SNMP operations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrpsTCPIPAccessEntry  

brpsTCPIPAccessIndex 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1.1
The TCP/IP access table's index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

brpsTCPIPAccessNodeAddress 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1.2
IP address of node that has parmittion for access.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brpsTCPIPAccessSubnetMask 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1.3
Subnet mask of node that has parmittion for access.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brpsAdvancedTCPIPAccessSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.2.19
0 indicates the Advanced TCP/IP Access is not supported. 1 indicates Advanced TCP/IP Access support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsAdvancedTCPIPAccessEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.2.20
0 indicates the Advanced TCP/IP Access is not enabled. 1 indicates that the Advanced TCP/IP Access is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsAdvancedTCPIPAccessAdministratorIPAddress 1.3.6.1.4.1.2435.2.4.3.1240.5.2.21
Administrator IPAddress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brpsAdvancedTCPIPAccessSetting 1.3.6.1.4.1.2435.2.4.3.1240.5.2.22
0 indicates the Advanced TCP/IP Access is reject. 1 indicates that the Advanced TCP/IP Access is Accept.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsNetwareSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.3.1
0 indicates the Netware protocol is not supported. 1 indicates Netware support is implemented by the firmware. 2 indicates that Netware NEST NDS support is implemented by the firmware.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

brpsNetwareEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.3.2
0 indicates the Netware protocol is not enabled. 1 indicates that the Netware protocol is enabled. Writing a non-zero value will enable the Netware protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsNetwareFrameType 1.3.6.1.4.1.2435.2.4.3.1240.5.3.3
The frame type to be used as follows: 0 = Automatic, 1 = Ethernet 802.3, 2 = Ethernet II, 3 = Ethernet 802.2, 4 = Ethernet SNAP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4  

brpsNetwarePollFreq 1.3.6.1.4.1.2435.2.4.3.1240.5.3.4
File server polling frequency in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..60  

brpsNetwareAdvFreq 1.3.6.1.4.1.2435.2.4.3.1240.5.3.5
Print server advertising frequency in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..210  

brpsNetwarePassword 1.3.6.1.4.1.2435.2.4.3.1240.5.3.6
The Netware login password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

brpsNetwareRestart 1.3.6.1.4.1.2435.2.4.3.1240.5.3.7
Setting any value will restart the Netware protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsNetwareServerTable 1.3.6.1.4.1.2435.2.4.3.1240.5.3.8
This table represents the list of enabled Netware servers. Up to 16 Netware servers can be enabled. If the service is configured for remote printer mode, then only the first enabled server is used and it should specify a print server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrpsNetwareServerEntry

brpsNetwareServerEntry 1.3.6.1.4.1.2435.2.4.3.1240.5.3.8.1
A row in the Netware server table. Rows cannot be created or deleted via direct SNMP operations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrpsNetwareServerEntry  

brpsNetwareServerIndex 1.3.6.1.4.1.2435.2.4.3.1240.5.3.8.1.1
The Netware server number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

brpsNetwareServerName 1.3.6.1.4.1.2435.2.4.3.1240.5.3.8.1.2
The Netware server name. Specifies a print server if the service is in remote printer mode, or a file server if the service is in queue server mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..48)  

brpsNetwarePasswordSet 1.3.6.1.4.1.2435.2.4.3.1240.5.3.9
Returns 1 if the Netware login password is set, 0 if not set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsNDSSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.3.10
0 indicates NDS is not supported. 1 indicates NDS is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsNetwareEtherIINetInfo 1.3.6.1.4.1.2435.2.4.3.1240.5.3.11
Ethernet II network information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

brpsNetwareEtherIICount 1.3.6.1.4.1.2435.2.4.3.1240.5.3.12
Ethernet II network counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsNetware8022NetInfo 1.3.6.1.4.1.2435.2.4.3.1240.5.3.13
IEEE 802.2 network information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

brpsNetware8022Count 1.3.6.1.4.1.2435.2.4.3.1240.5.3.14
IEEE 802.2 network counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsNetware8023NetInfo 1.3.6.1.4.1.2435.2.4.3.1240.5.3.15
IEEE 802.3 network information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

brpsNetware8023Count 1.3.6.1.4.1.2435.2.4.3.1240.5.3.16
IEEE 802.3 network information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsNetwareSNAPNetInfo 1.3.6.1.4.1.2435.2.4.3.1240.5.3.17
SNAP network information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

brpsNetwareSNAPCount 1.3.6.1.4.1.2435.2.4.3.1240.5.3.18
SNAP network count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsNetwareServicingServerName 1.3.6.1.4.1.2435.2.4.3.1240.5.3.19
Netware server name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..48)  

brpsNetwareServicingQueueName 1.3.6.1.4.1.2435.2.4.3.1240.5.3.20
Netware queue name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..48)  

brpsNetwareServicingServerCount 1.3.6.1.4.1.2435.2.4.3.1240.5.3.21
Number of netware servers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

brpsNetwareServicingQueueCount 1.3.6.1.4.1.2435.2.4.3.1240.5.3.22
Number of netware queues.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

brpsNetwarePrintJob 1.3.6.1.4.1.2435.2.4.3.1240.5.3.23
Number of netware print job.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsAppleTalkSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.4.1
0 indicates the AppleTalk protocol is not supported. 1 indicates AppleTalk support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsAppleTalkEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.4.2
0 indicates the AppleTalk protocol is not enabled. 1 indicates that the AppleTalk protocol is enabled. Writing a non-zero value will enable the AppleTalk protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsAppleTalkZone 1.3.6.1.4.1.2435.2.4.3.1240.5.4.3
The AppleTalk zone the print server belongs to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

brpsAppleTalkPrintJob 1.3.6.1.4.1.2435.2.4.3.1240.5.4.4
Counter of AppleTalk print job.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsAppleTalkReadByte 1.3.6.1.4.1.2435.2.4.3.1240.5.4.5
Counter of read bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsAppleTalkWriteByte 1.3.6.1.4.1.2435.2.4.3.1240.5.4.6
Counter of write bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsAppleTalkReadError 1.3.6.1.4.1.2435.2.4.3.1240.5.4.7
Counter of read error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsAppleTalkWriteError 1.3.6.1.4.1.2435.2.4.3.1240.5.4.8
Counter of write error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsBanyanSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.5.1
0 indicates the Banyan protocol is not supported. 1 indicates Banyan support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsBanyanEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.5.2
0 indicates the Banyan protocol is not enabled. 1 indicates that the Banyan protocol is enabled. Writing a non-zero value will enable the Banyan protocol if is is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsBanyanLoginName 1.3.6.1.4.1.2435.2.4.3.1240.5.5.3
The Banyan login name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

brpsBanyanPassword 1.3.6.1.4.1.2435.2.4.3.1240.5.5.4
The Banyan login password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

brpsBanyanHopCount 1.3.6.1.4.1.2435.2.4.3.1240.5.5.5
Number of hops between the print server and the Banyan file server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

brpsBanyanTimeout 1.3.6.1.4.1.2435.2.4.3.1240.5.5.6
Timeout in seconds for a Banyan print job.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

brpsBanyanPasswordSet 1.3.6.1.4.1.2435.2.4.3.1240.5.5.7
Returns 1 if the Banyan login password is set, 0 if not set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsBanyanIPNetworkID1 1.3.6.1.4.1.2435.2.4.3.1240.5.5.8
IP Network ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

brpsBanyanIPNetworkID2 1.3.6.1.4.1.2435.2.4.3.1240.5.5.9
IP Network ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

brpsBanyanRouter1 1.3.6.1.4.1.2435.2.4.3.1240.5.5.10
Router ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

brpsBanyanRouter2 1.3.6.1.4.1.2435.2.4.3.1240.5.5.11
Router ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

brpsBanyanIPPacket 1.3.6.1.4.1.2435.2.4.3.1240.5.5.12
Counter of IP Packet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsBanyanErrorCS 1.3.6.1.4.1.2435.2.4.3.1240.5.5.13
Counter of CS error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsBanyanErrorPT 1.3.6.1.4.1.2435.2.4.3.1240.5.5.14
Counter of PT error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsBanyanErrorLE 1.3.6.1.4.1.2435.2.4.3.1240.5.5.15
Counter of LE error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsBanyanPrintServerStatus 1.3.6.1.4.1.2435.2.4.3.1240.5.5.16
Banyan print server status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

brpsBanyanServerAddress1 1.3.6.1.4.1.2435.2.4.3.1240.5.5.17
Banyan server address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

brpsBanyanServerAddress2 1.3.6.1.4.1.2435.2.4.3.1240.5.5.18
Banyan server address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

brpsBanyanIPCConnectionInformation 1.3.6.1.4.1.2435.2.4.3.1240.5.5.19
IPC connection information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

brpsBanyanIPCSequenceError 1.3.6.1.4.1.2435.2.4.3.1240.5.5.20
IPC sequence error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsBanyanIPCListen 1.3.6.1.4.1.2435.2.4.3.1240.5.5.21
IPC listen.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

brpsBanyanSPPConnectionInformation 1.3.6.1.4.1.2435.2.4.3.1240.5.5.22
SPP connection information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

brpsBanyanSPPSequenceError 1.3.6.1.4.1.2435.2.4.3.1240.5.5.23
SPP sequence error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsBanyanSPPListen 1.3.6.1.4.1.2435.2.4.3.1240.5.5.24
SPP listen.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

brpsEmailSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.6.1
0 indicates the POP3/SMTP email protocols are not supported. 1 indicates email support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsEmailEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.6.2
0 indicates the POP3/SMTP email protocols are not enabled. 1 indicates that the email protocols are enabled. Writing a non-zero value will enable the email protocols if they are supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsPOP3Address 1.3.6.1.4.1.2435.2.4.3.1240.5.6.3
The IP Address of the POP3 server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brpsSMTPAddress 1.3.6.1.4.1.2435.2.4.3.1240.5.6.4
The IP Address of the SMTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brpsPOP3Name 1.3.6.1.4.1.2435.2.4.3.1240.5.6.5
The POP3 mailbox name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

brpsPOP3Password 1.3.6.1.4.1.2435.2.4.3.1240.5.6.6
The POP3 mailbox password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

brpsPOP3PollFreq 1.3.6.1.4.1.2435.2.4.3.1240.5.6.7
The POP3 polling frequency in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..32767  

brpsPOP3Timeout 1.3.6.1.4.1.2435.2.4.3.1240.5.6.8
The POP3 timeout in minutes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..32767  

brpsPOP3PasswordSet 1.3.6.1.4.1.2435.2.4.3.1240.5.6.9
Returns 1 if the POP3 password is set, 0 if not set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsPOP3TotalMessage 1.3.6.1.4.1.2435.2.4.3.1240.5.6.10
Counter of POP3 message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsPOP3TotalConnect 1.3.6.1.4.1.2435.2.4.3.1240.5.6.11
Counter of POP3 connect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsPOP3TotalConnectFailure 1.3.6.1.4.1.2435.2.4.3.1240.5.6.12
Counter of POP3 connect error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsPOP3TotalConnectionLost 1.3.6.1.4.1.2435.2.4.3.1240.5.6.13
Counter of POP3 connection lost.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsPOP3TotalUserFailure 1.3.6.1.4.1.2435.2.4.3.1240.5.6.14
Counter of POP3 user error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsPOP3TotalPasswordFailure 1.3.6.1.4.1.2435.2.4.3.1240.5.6.15
Counter of POP3 pass error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsPOP3TotalIOError 1.3.6.1.4.1.2435.2.4.3.1240.5.6.16
Counter of POP3 I/O error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsSMTPTotalMessage 1.3.6.1.4.1.2435.2.4.3.1240.5.6.17
Counter of SMTP message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsSMTPTotalConnect 1.3.6.1.4.1.2435.2.4.3.1240.5.6.18
Counter of SMTP connect.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsSMTPTotalConnectFailure 1.3.6.1.4.1.2435.2.4.3.1240.5.6.19
Counter of SMTP connect error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsSMTPTotalRecvFromFailure 1.3.6.1.4.1.2435.2.4.3.1240.5.6.20
Counter of SMTP recvfrom error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsSMTPTotalSendToFailure 1.3.6.1.4.1.2435.2.4.3.1240.5.6.21
Counter of SMTP recvfrom error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsPOP3Supported 1.3.6.1.4.1.2435.2.4.3.1240.5.6.101
0 indicates the POP3 protocol is not supported. 1 indicates the POP3 protocol is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsSMTPServerAuthMethod 1.3.6.1.4.1.2435.2.4.3.1240.5.6.102
0 indicates the user is not authenticated to the SMTP Server. 1 indicates the user is authenticated to the SMTP Server using SMTP-AUTH. 2 indicates the user is authenticated to the SMTP Server using POP before SMTP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brpsSMTPAUTHUsername 1.3.6.1.4.1.2435.2.4.3.1240.5.6.103
The username of SMTP server's account.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..60)  

brpsSMTPAUTHPassword 1.3.6.1.4.1.2435.2.4.3.1240.5.6.104
The password of SMTP server's account.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

brpsSMTPAUTHPasswordSet 1.3.6.1.4.1.2435.2.4.3.1240.5.6.105
Returns 1 if the SMTP server login password is set, 0 if not set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsSmtpAUTHTimeout 1.3.6.1.4.1.2435.2.4.3.1240.5.6.106
The SMTP-AUTH timeout in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..32767  

brpsPOPbeforeSMTPWait 1.3.6.1.4.1.2435.2.4.3.1240.5.6.107
The wait time in mili seconds between POP logging in and SMTP sending.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

brpsAPOPEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.6.108
0 indicates the APOP is not enabled. 1 indicates the APOP is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsSMTPEnhancedAuthSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.6.150
Bit0 indicates 'no authentication'. Bit1 indicates 'SMTP-AUTH'. Bit2 indicates 'POP before SMTP'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

brpsAPOPSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.6.151
0 indicates the APOP is not supported. 1 indicates the APOP is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsEmailSendTestSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.6.152
0 indicates the Email Sending Test is not supported. 1 indicates the Email Sending Test is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsEmailRecvTestSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.6.153
0 indicates the Email Receiving Test is not supported. 1 indicates the Email Receiving Test is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsChangeSMTPPortSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.6.154
0 indicates to change the SMTP port number is not supported. 1 indicates to change the SMTP port number is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsSMTPPortNumber 1.3.6.1.4.1.2435.2.4.3.1240.5.6.155
The port number of connection to SMTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

brpsChangePOP3PortSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.6.156
0 indicates to change the POP3 port number is not supported. 1 indicates to change the POP3 port number is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsPOP3PortNumber 1.3.6.1.4.1.2435.2.4.3.1240.5.6.157
The port number of connection to POP3 server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

brpsTmpSMTPServerName 1.3.6.1.4.1.2435.2.4.3.1240.5.6.170
Temporary Setting for Email Sending Test. The FQDN name of the SMTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

brpsTmpSMTPServerAuthMethod 1.3.6.1.4.1.2435.2.4.3.1240.5.6.171
Temporary Setting for Email Sending Test. 0 indicates the user is not authenticated to the SMTP Server. 1 indicates the user is authenticated to the SMTP Server using SMTP-AUTH. 2 indicates the user is authenticated to the SMTP Server using POP before SMTP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brpsTmpSMTPAUTHUsername 1.3.6.1.4.1.2435.2.4.3.1240.5.6.172
Temporary Setting for Email Sending Test. The username of SMTP server's account.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..60)  

brpsTmpSMTPAUTHPassword 1.3.6.1.4.1.2435.2.4.3.1240.5.6.173
Temporary Setting for Email Sending Test. The password of SMTP server's account.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

brpsTmpPOP3ServerName 1.3.6.1.4.1.2435.2.4.3.1240.5.6.174
Temporary Setting for Email Sending/Receiving Test. The FQDN name of the POP3 server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

brpsTmpPOP3Name 1.3.6.1.4.1.2435.2.4.3.1240.5.6.175
Temporary Setting for Email Sending/Receiving Test. The POP3 mailbox name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

brpsTmpPOP3Password 1.3.6.1.4.1.2435.2.4.3.1240.5.6.176
Temporary Setting for Email Sending/Receiving Test. The POP3 mailbox password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

brpsTmpPrintersEmailaddress 1.3.6.1.4.1.2435.2.4.3.1240.5.6.177
Temporary Setting for Email Sending Test. The Printers Email Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brpsTmpAPOPEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.6.178
Temporary Setting for Email Sending/Receiving Test. 0 indicates the APOP is not enabled. 1 indicates the APOP is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsTmpSMTPAUTHPasswordModified 1.3.6.1.4.1.2435.2.4.3.1240.5.6.179
0 indicates the SMTP server password is not modified. 1 indicates the SMTP server password is modified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsTmpPOP3PasswordModified 1.3.6.1.4.1.2435.2.4.3.1240.5.6.180
0 indicates the POP3 server password is not modified. 1 indicates the POP3 server password is modified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsTmpSMTPPortNumber 1.3.6.1.4.1.2435.2.4.3.1240.5.6.181
Temporary Setting for Email Sending Test. The port number of connection to SMTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

brpsTmpPOP3PortNumber 1.3.6.1.4.1.2435.2.4.3.1240.5.6.182
Temporary Setting for Email Sending/Receiving Test. The port number of connection to POP3 server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

brpsEmailSendTestMail 1.3.6.1.4.1.2435.2.4.3.1240.5.6.200
0 indicates the testmail is not sended at Email Sending Test. 1 indicates the testmail is sended at Email Sending Test.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsEmailTestDestinationAddress 1.3.6.1.4.1.2435.2.4.3.1240.5.6.201
The destination Email Address of Email Sending Test.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..80)  

brpsEmailSendTestCall 1.3.6.1.4.1.2435.2.4.3.1240.5.6.210
0 indicates the Email Sending Test is not called on. ('READY') 1 indicates the Email Sending Test is called on. ('START') 2 indicates the Email Sending Test is canceled. ('CANCEL')
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brpsEmailRecvTestCall 1.3.6.1.4.1.2435.2.4.3.1240.5.6.211
0 indicates the Email Receiving Test is not called on. ('READY') 1 indicates the Email Receiving Test is called. ('START') 2 indicates the Email Receiving Test is canceled. ('CANCEL')
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brpsEmailSendRecvTestCall 1.3.6.1.4.1.2435.2.4.3.1240.5.6.212
0 indicates the Email Sending and Receiving Test is not called on. ('READY') 1 indicates the Email Sending and Receiving Test is called. ('START') 2 indicates the Email Sending and Receiving Test is canceled. ('CANCEL')
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

brpsEmailTestResult 1.3.6.1.4.1.2435.2.4.3.1240.5.6.220
This Value is divided into 15-8bit and 7-0bit. 15-8bit indicates Email Sending Test's Result. 7-0bit indicates Email Receiving Test's Result. (However, the value from 0x00 to 0x04 is only set to 7-0bit.) 0x00 indicates the Email Test is not running. 0x01 indicates the Email Test is running. ('BUSY') 0x02 indicates the Email Test is canceled.('CANCELED') 0x03 indicates the Email Test is Locked by another Email Test process.(LOCKED) 0x04 indicates the Email Test is not executed. -- unused 0x10 indicates the Status 'Fatal Error is occurred during Email Testing'. 0x20 indicates the Status 'Invalid value is set in SMTP Server Address'. 0x21 indicates the Status 'Invalid value is set in SMTP-AUTH Account Name'. 0x22 indicates the Status 'Invalid value is set in SMTP-AUTH Password'. 0x30 indicates the Status 'Invalid value is set in POP3 Server Address'. 0x31 indicates the Status 'Invalid value is set in POP3 Account Name'. 0x32 indicates the Status 'Invalid value is set in POP3 Account Password'. 0x40 indicates the Status 'Invalid value is set in POP3 Printer E-mail Address'. 0x41 indicates the Status 'Invalid value is set in Destination E-mail Address'. 0x50 indicates the Status 'Sending OK'. 0x51 indicates the Status 'Cannot locate SMTP server'. 0x52 indicates the Status 'Cannot connect to SMTP server'. 0x53 indicates the Status 'Cannot authenticate with SMTP server by using method'. 0x54 indicates the Status 'Authentication failure in SMTP server'. 0x55 indicates the Status 'Email Sending Timeout' -- unused 0x60 indicates the Status 'Receiving OK'. 0x61 indicates the Status 'Cannot locate POP3 server'. 0x62 indicates the Status 'Cannot connect to POP3 server'. 0x63 indicates the Status 'Authentication failure in POP3 server'. 0x64 indicates the Status 'Cannot authenticate with POP3 server by using method'. 0x65 indicates the Status 'Email Receiving Timeout' -- unused 0x66 indicates the Email Test is Locked by another Email process. 0x70 indicates the Status 'Cannot resolve the host name (DNS Error)'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

brpsPOP3TotalAPOPFailure 1.3.6.1.4.1.2435.2.4.3.1240.5.6.221
Counter of POP3 APOP error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsDLCSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.7.1
0 indicates the DLC protocol is not supported. 1 indicates DLC support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsDLCEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.7.2
0 indicates the DLC protocol is not enabled. 1 indicates that the DLC protocol is enabled. Writing a non-zero value will enable the DLC protocol if is is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsDLCPrintStatus 1.3.6.1.4.1.2435.2.4.3.1240.5.7.3
DLC print status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

brpsDLCLLCState 1.3.6.1.4.1.2435.2.4.3.1240.5.7.4
LLC status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsDLCLLCConnectHost 1.3.6.1.4.1.2435.2.4.3.1240.5.7.5
LLC connected host name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

brpsDLCLLCLastIFrame 1.3.6.1.4.1.2435.2.4.3.1240.5.7.6
LLC last valid I-frame.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsDLCLLCRecvPacket 1.3.6.1.4.1.2435.2.4.3.1240.5.7.7
Counter of LLC receive packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

brpsDLCLLCPortStatus 1.3.6.1.4.1.2435.2.4.3.1240.5.7.8
Port status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

brpsIPPSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.9.1
0 indicates the IPP protocol is not supported. 1 indicates IPP support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsIPPEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.9.2
0 indicates the IPP protocol is not enabled. 1 indicates that the IPP protocol is enabled. Writing a non-zero value will enable the IPP protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brIPPRegularPortEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.9.3
0 indicates that the IPP regular port is not enabled. 1 indicates that the IPP regular port is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brIPPSSLPortEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.9.4
0 indicates that the IPP SSL port is not enabled. 1 indicates that the IPP SSL port is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brIPPOriginalPortEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.9.5
0 indicates that the IPP original port is not enableed. 1 indicates that the IPP original port is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsNtSendSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.10.1
0 indicates the NtSend protocol is not supported. 1 indicates NtSend support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsNtSendEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.10.2
0 indicates the NtSend protocol is not enabled. 1 indicates that the NtSend protocol is enabled. Writing a non-zero value will enable the NtSend protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsFirmwareIPAddress 1.3.6.1.4.1.2435.2.4.3.1240.6.1
The IP address of the host from which to TFTP GET the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brpsFirmwareHost 1.3.6.1.4.1.2435.2.4.3.1240.6.2
The Netware server name from which to fetch the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

brpsFirmwareFile 1.3.6.1.4.1.2435.2.4.3.1240.6.3
The firmware file to be reloaded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

brpsFirmwareReload 1.3.6.1.4.1.2435.2.4.3.1240.6.4
Setting a value of 0x5A will cause the print server to begin attempts to reload the firmware within 5 seconds. Further attempts to read or modify the configuration are not recommended until after the firmware has been reloaded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsFirmwareDescription 1.3.6.1.4.1.2435.2.4.3.1240.6.5
Firmware version and date.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

brpsFirmwareXModem 1.3.6.1.4.1.2435.2.4.3.1240.6.6
Set 1 execute XMODEM mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsFirmwareAdvancedAddressSupported 1.3.6.1.4.1.2435.2.4.3.1240.6.7
0 indicates the Firmware Advanced Address is not supported. 1 indicates Firmware Advanced Address support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsFirmwareAdvancedAddress 1.3.6.1.4.1.2435.2.4.3.1240.6.8
The address of the host from which to TFTP GET the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

brpsNetBEUISupported 1.3.6.1.4.1.2435.2.4.3.1240.5.8.1
0 indicates the NetBEUI protocol is not supported. 1 indicates NetBEUI support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsNetBEUIEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.8.2
0 indicates the NetBEUI protocol is not enabled. 1 indicates that the NetBEUI protocol is enabled. Writing a non-zero value will enable the NetBEUI protocol if is is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsNetBEUIDomain 1.3.6.1.4.1.2435.2.4.3.1240.5.8.3
The NetBEUI domain name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

brpsNetBIOSIPSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.8.4
0 indicates the NetBIOS IP protocol is not supported. 1 indicates NetBIOS IP support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsNetBIOSIPEnable 1.3.6.1.4.1.2435.2.4.3.1240.5.8.5
0 indicates the NetBIOS IP protocol is not enabled. 1 indicates that the NetBIOS IP protocol is enabled. Writing a non-zero value will enable the NetBIOS IP protocol if is is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsNetBIOSIPMethod 1.3.6.1.4.1.2435.2.4.3.1240.5.8.6
Method used to determine the IP Address of the WINS server. AUTO tries all protocols (currently only DHCP is tried). STATIC uses the configured address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brpsNetBIOSPrimaryWINSAddr 1.3.6.1.4.1.2435.2.4.3.1240.5.8.7
The IP Address of the primary WINS server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brpsNetBIOSSecondaryWINSAddr 1.3.6.1.4.1.2435.2.4.3.1240.5.8.8
The IP Address of the secondary WINS server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brpsNetBIOSPrintingSupported 1.3.6.1.4.1.2435.2.4.3.1240.5.8.101
0 indicates the NetBIOS IP protocol printing is not supported. 1 indicates the NetBIOS IP protocol printing is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brLPDType 1.3.6.1.4.1.2435.2.4.3.2435.5.2.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

brFTPSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.10.1
0 indicates the FTP protocol is not supported. 1 indicates FTP support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brFTPEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.10.2
0 indicates the FTP protocol is not enabled. 1 indicates that the FTP protocol is enabled. Writing a non-zero value will enable the FTP protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brUPnPSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.11.1
0 indicates the UPnP protocol is not supported. 1 indicates UPnP support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brUPnPEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.11.2
0 indicates the UPnP protocol is not enabled. 1 indicates that the UPnP protocol is enabled. Writing a non-zero value will enable the UPnP protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brAPIPASupported 1.3.6.1.4.1.2435.2.4.3.2435.5.12.1
0 indicates the APIPA protocol is not supported. 1 indicates APIPA support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brAPIPAEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.12.2
0 indicates the APIPA protocol is not enabled. 1 indicates that the APIPA protocol is enabled. Writing a non-zero value will enable the APIPA protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brmDNSSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.13.1
0 indicates the mDNS protocol is not supported. 1 indicates mDNS support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brmDNSEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.13.2
0 indicates the mDNS protocol is not enabled. 1 indicates that the mDNS protocol is enabled. Writing a non-zero value will enable the mDNS protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brmDNSPrinterName 1.3.6.1.4.1.2435.2.4.3.2435.5.13.3
mDNS Service Name
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

brLAASupported 1.3.6.1.4.1.2435.2.4.3.2435.5.14.1
This value indicate if the locally administered addressing is supported. 0: Not Supported 1: Supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brLAAMacAddress 1.3.6.1.4.1.2435.2.4.3.2435.5.14.2
A locally administered address (LAA) that replaces the factory-assigned MAC address (UAA: universally administered address). If this setting is all-zero address (i.e. 6 bytes of zeros), the factory-assigned MAC address is used as the MAC address of the device. The LAA address must start with X2, X6, XA, or XE, where X is any hexadecimal digit 0 to F.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

brIPv6Supported 1.3.6.1.4.1.2435.2.4.3.2435.5.15.1
0 indicates the IPv6 protocol is not supported. 1 indicates IPv6 support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brIPv6Enable 1.3.6.1.4.1.2435.2.4.3.2435.5.15.2
0 indicates the IPv6 protocol is not enabled. 1 indicates that the IPv6 protocol is enabled. Writing a non-zero value will enable the IPv6 protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brIPv6Priority 1.3.6.1.4.1.2435.2.4.3.2435.5.15.3
0 indicates the IPv6 protocol is low priority. 1 indicates that the IPv6 protocol is high priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brtelnetSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.16.1
0 indicates the telnet protocol is not supported. 1 indicates telnet support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brtelnetEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.16.2
0 indicates the telnet protocol is not enabled. 1 indicates that the telnet protocol is enabled. Writing a non-zero value will enable the telnet protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brEWSSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.17.1
0 indicates the EWS protocol is not supported. 1 indicates EWS support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brEWSEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.17.2
0 indicates the EWS protocol is not enabled. 1 indicates that the EWS protocol is enabled. Writing a non-zero value will enable the EWS protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brEWSRegularPortEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.17.3
0 indicates that the EWS regular port is not enabled. 1 indicates that the EWS regular port is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brEWSSSLPortEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.17.4
0 indicates that the EWS SSL port is not enabled. 1 indicates that the EWS SSL port is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brSNMPSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.18.1
0 indicates the SNMP protocol is not supported. 1 indicates SNMP support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brSNMPEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.18.2
0 indicates the SNMP protocol is not enabled. 1 indicates that the SNMP protocol is enabled. Writing a non-zero value will enable the SNMP protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brTFTPSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.20.1
0 indicates the TFTP protocol is not supported. 1 indicates TFTP support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brTFTPEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.20.2
0 indicates the TFTP protocol is not enabled. 1 indicates that the TFTP protocol is enabled. Writing a non-zero value will enable the TFTP protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brHTTPSSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.21.1
0 indicates the HTTPS/IPPS protocol is not supported. 1 indicates HTTPS/IPPS support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brHTTPSEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.21.2
0 indicates the HTTPS/IPPS protocol is not enabled. 1 indicates that the HTTPS/IPPS protocol is enabled. Writing a non-zero value will enable the HTTPS/IPPS protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brLPDSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.22.1
0 indicates the LPD protocol is not supported. 1 indicates LPD support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brLPDEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.22.2
0 indicates the LPD protocol is not enabled. 1 indicates that the LPD protocol is enabled. Writing a non-zero value will enable the LPD protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brRawPortSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.23.1
0 indicates the RawPort protocol is not supported. 1 indicates RawPort support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brRawPortEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.23.2
0 indicates the RawPort protocol is not enabled. 1 indicates that the RawPort protocol is enabled. Writing a non-zero value will enable the RawPort protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brLLTDSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.24.1
0 indicates the LLTD protocol is not supported. 1 indicates LLTD support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brLLTDEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.24.2
0 indicates the LLTD protocol is not enabled. 1 indicates that the LLTD protocol is enabled. Writing a non-zero value will enable the LLTD protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brWebServicesSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.25.1
0 indicates the WebServices protocol is not supported. 1 indicates WebServices support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brWebServicesEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.25.2
0 indicates the WebServices protocol is not enabled. 1 indicates that the WebServices protocol is enabled. Writing a non-zero value will enable the WebServices protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brWebServicesRegularPortEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.25.3
0 indicates that the WebServices regular port is not enabled. 1 indicates that the WebServices regular port is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brWebServicesSSLPortEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.25.4
0 indicates that the WebServices SSL port is not enabled. 1 indicates that the WebServices SSL port is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brLLMNREnable 1.3.6.1.4.1.2435.2.4.3.2435.5.26.1
0 indicates the LLMNR protocol is not enabled. 1 indicates that the LLMNR protocol is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brProxySupported 1.3.6.1.4.1.2435.2.4.3.2435.10.1.1
0 indicates the Proxy is not supported. 1 indicates Proxy is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brProxyEnable 1.3.6.1.4.1.2435.2.4.3.2435.10.1.2
0 indicates the Proxy is not enabled. 1 indicates that the Proxy is enabled. Writing a non-zero value will enable the Proxy if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brProxyBypassServer 1.3.6.1.4.1.2435.2.4.3.2435.10.1.3
on(2) indicates the bypass proxy server for local addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

brProxyServerCount 1.3.6.1.4.1.2435.2.4.3.2435.10.1.11
Maximum number of Proxy Server INDEX.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brProxyServerInfoTable 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12
This table represents Proxy Server Info.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrProxyServerInfoEntry

brProxyServerInfoEntry 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1
A row in the ProxyServerInfo table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrProxyServerInfoEntry  

brProxyServerInfoIndex 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

brProxyServerType 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.2
The Proxy server ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER http(1), secure(2), ftp(3), gopher(4), socks(5)  

brProxyServerName 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.3
The Proxy server name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..80)  

brProxyServerPort 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.4
The Proxy server port number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

brJobTerminationSupported 1.3.6.1.4.1.2435.2.4.3.2435.20.1.1
0 indicates the Job termination setting is not supported. 1 indicates the Job termination setting is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brJobTerminationEnable 1.3.6.1.4.1.2435.2.4.3.2435.20.1.2
0 indicates the Job termination setting is not enabled. 1 indicates the Job termination setting is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brSNMPTrapTable 1.3.6.1.4.1.2435.2.4.3.2435.20.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrSNMPTrapEntry

brSNMPTrapEntry 1.3.6.1.4.1.2435.2.4.3.2435.20.2.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrSNMPTrapEntry  

brSNMPTrapIndex 1.3.6.1.4.1.2435.2.4.3.2435.20.2.1.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

brTCPIPServerAddress 1.3.6.1.4.1.2435.2.4.3.2435.20.2.1.1.2
The Destination IP Address for SNMP Trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brLegacyCompatible 1.3.6.1.4.1.2435.2.4.3.2435.20.3.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brDeviceNegotiationEncryptVer 1.3.6.1.4.1.2435.2.4.3.2435.5.100.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsServerCertificateNum 1.3.6.1.4.1.2435.2.4.3.2435.5.100.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brDeviceNegotiationGetChallenge 1.3.6.1.4.1.2435.2.4.3.2435.5.100.10.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(20)  

brDeviceNegotiationConfirmPassword 1.3.6.1.4.1.2435.2.4.3.2435.5.100.10.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(60)  

brDeviceNegotiationChangePassword 1.3.6.1.4.1.2435.2.4.3.2435.5.100.10.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(48)  

brpsWLanDot11Supported 1.3.6.1.4.1.2435.2.4.3.100.1.1.1
Flags per bit. 802.11a bit1=1 802.11b bit2=1 802.11g bit3=1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsWLanAvailableChannel 1.3.6.1.4.1.2435.2.4.3.100.1.1.2
The available channel list.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brpsWLanCapabilityEncryptModeCount 1.3.6.1.4.1.2435.2.4.3.100.1.1.3
index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsWLanCapabilityEncryptModeTable 1.3.6.1.4.1.2435.2.4.3.100.1.1.4
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrpsWLanCapabilityEncryptModeEntry

brpsWLanCapabilityEncryptModeEntry 1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrpsWLanCapabilityEncryptModeEntry  

brpsWLanCapabilityEncryptModeIndex 1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.1
index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

brpsWLanCapabilityEncryptModeType 1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.2
Encrypt Mode Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), wep(2), tkip(3), aes(4), ckip(5)  

brpsWLanCapabilityEncryptModeDescription 1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.3
Encrypt Mode description
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brpsWLanCapabilityEncryptModeSupported 1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.4
0: Not Supported 1: Supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsWLanCapabilityAuthModeCount 1.3.6.1.4.1.2435.2.4.3.100.1.1.5
index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsWLanCapabilityAuthModeTable 1.3.6.1.4.1.2435.2.4.3.100.1.1.6
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrpsWLanCapabilityAuthModeEntry

brpsWLanCapabilityAuthModeEntry 1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrpsWLanCapabilityAuthModeEntry  

brpsWLanCapabilitAuthModeIndex 1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.1
index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

brpsWLanCapabilityAuthModeType 1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.2
Auth Mode Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER opensystem(1), shardkey(2), wpa-psk(3), wpa-none(4), wpa(5), wpa2(6), leap(7), eapfast-none(8), eapfast-mschapv2(9), eapfast-gtc(10), eapfast-tls(11), wpa2-psk(12)  

brpsWLanCapabilityAuthModeDescription 1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.3
Auth Mode description
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brpsWLanCapabilityAuthModeSupported 1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.4
0: Not Supported 1: Supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsWLanCapabilityAuthEAPCount 1.3.6.1.4.1.2435.2.4.3.100.1.1.7
index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsWLanCapabilityAuthEAPTable 1.3.6.1.4.1.2435.2.4.3.100.1.1.8
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrpsWLanCapabilityAuthEAPEntry

brpsWLanCapabilityAuthEAPEntry 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrpsWLanCapabilityAuthEAPEntry  

brpsWLanCapabilityAuthEAPIndex 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.1
index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brpsWLanCapabilityAuthEAPType 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.2
Auth EAP Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER eap-md5(1), eap-tls(2), eap-ttls(3), peap(4), leap(5), eapfast-none(6), eapfast-mschapv2(7), eapfast-gtc(8), eapfast-tls(9)  

brpsWLanCapabilityAuthEAPDescription 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.3
Auth EAP description
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brpsWLanCapabilityAuthEAPSupported 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.4
0: Not Supported 1: Supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsWLanDestination 1.3.6.1.4.1.2435.2.4.3.100.1.2.1
The destination of this NIC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsWLanTransmitLevel 1.3.6.1.4.1.2435.2.4.3.100.1.2.2
The level of the transmitting power.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsPit3WLanTestStatus 1.3.6.1.4.1.2435.2.4.3.100.1.2.3
The test status of pit3 for WLAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsWLanNetSearchSupported 1.3.6.1.4.1.2435.2.4.3.100.1.11.1
0 indicates the Wireless network serch function is not supported. 1 indicates the Wireless network serch function is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsAvailableWLanScan 1.3.6.1.4.1.2435.2.4.3.100.1.11.2
Read: unsupported(1), supported(2) Set: = <1:Start | 2:Start w/ option>[;;[;]]
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brpsAvailableWLanScanWaitTime 1.3.6.1.4.1.2435.2.4.3.100.1.11.3
Scan Wait Time
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsAvailableWLanCount 1.3.6.1.4.1.2435.2.4.3.100.1.11.10
Available wireless LAN count.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsAvailableWLanTable 1.3.6.1.4.1.2435.2.4.3.100.1.11.11
This table represents Available Wireless LAN Info.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrpsAvailableWLanEntry

brpsAvailableWLanEntry 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1
A row in the brpsAvailableWLanTable table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrpsAvailableWLanEntry  

brpsAvailableWLanIndex 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

brpsAvailableWLanName 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.2
The available wireless LAN name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

brpsAvailableWLanMode 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.3
The available wireless LAN mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dot11b-gAuto(1), dot11b(2), dot11g(3)  

brpsAvailableWLanCommMode 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.4
The available wireless LAN communication mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER accesPoint(1), adhoc-Wi-Fi(2)  

brpsAvailableWLanChannel 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.5
The available wireless LAN channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsAvailableWLanPowerLevel 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.6
The available wireless LAN power level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsAvailableWLanAuthMode 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.7
The available wireless LAN authentication mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), active(2)  

brpsAvailableWLanEncryptMode 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.8
The available wireless LAN encryption mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), active(2), wep(3), tkip(4)  

brpsWLanAOSSSupported 1.3.6.1.4.1.2435.2.4.3.100.1.12.1
0 indicates AOSS is not supported. 1 indicates AOSS is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsWLanAOSSIsRunnning 1.3.6.1.4.1.2435.2.4.3.100.1.12.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsWLanSESSupported 1.3.6.1.4.1.2435.2.4.3.100.1.13.1
0 indicates SES is not supported. 1 indicates SES is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsWLanWPSSupported 1.3.6.1.4.1.2435.2.4.3.100.1.14.1
0 indicates WPS is not supported. 1 indicates WPS is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsWLanWPSResult 1.3.6.1.4.1.2435.2.4.3.100.1.14.2
0 indicates WPS is successful. 1 indicates WPS is not successful. -1 indicates WPS is being set up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..1  

brpsWLanAPSetupMode 1.3.6.1.4.1.2435.2.4.3.100.11.1.1
AP setup mode status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER false(1), true(2)  

brpsWLanMode 1.3.6.1.4.1.2435.2.4.3.100.11.1.2
Wireless LAN mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dot11b-gAuto(1), dot11b(2), dot11g(3), dot11g-turbo(4)  

brpsWLanName 1.3.6.1.4.1.2435.2.4.3.100.11.1.3
The SSID setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

brpsWLanCommMode 1.3.6.1.4.1.2435.2.4.3.100.11.1.4
Wireless LAN communication mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER infrastructure(1), ad-Hoc-WiFi(2), ad-Hoc(3)  

brpsWLanChannel 1.3.6.1.4.1.2435.2.4.3.100.11.1.5
Wireless LAN channel setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brpsWLanCtsMode 1.3.6.1.4.1.2435.2.4.3.100.11.5.1
Wireless LAN CTS mode setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), always(2), none(3)  

brpsWLanCtsRate 1.3.6.1.4.1.2435.2.4.3.100.11.5.2
Wireless LAN CTS rate setting. However, the unit is 1/10.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

brpsWLanCtsType 1.3.6.1.4.1.2435.2.4.3.100.11.5.3
Wireless LAN CTS type setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER only(1), rts-cts(2)  

brpsWLanRtsCtsThreshold 1.3.6.1.4.1.2435.2.4.3.100.11.5.4
Wireless LAN RTS/CTS threshold setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 256..2346  

brpsWLanLengthThreshold 1.3.6.1.4.1.2435.2.4.3.100.11.5.5
Wireless LAN length threshold setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 256..2346  

brpsWLanDataRetry 1.3.6.1.4.1.2435.2.4.3.100.11.5.6
Wireless LAN DATA retyr setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

brpsWLanTransmitPowerSetting 1.3.6.1.4.1.2435.2.4.3.100.11.5.7
Wireless LAN transmit power setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER full(1), half(2), quarter(3), one-eighth(4), minimum(5), off(6)  

brpsWLanDeviceType 1.3.6.1.4.1.2435.2.4.3.100.11.5.8
Wireless LAN operation mode setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER stationMode(1), accessPointMode(2)  

brpsWLanEncryptMode 1.3.6.1.4.1.2435.2.4.3.100.11.11.1
Wireless LAN encrypt mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), wep(2), tkip(3), aes(4)  

brpsWLanAuthMode 1.3.6.1.4.1.2435.2.4.3.100.11.11.11
Wireless LAN authenticate mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER openSystem(1), sharedKey(2), wpa-psk(3), wpa-none(4), wpa(5), wpa2(6), leap(7), eapfast-none(8), eapfast-mschapv2(9), eapfast-gtc(10), eapfast-tls(11), wpa2-psk(12)  

brpsWLanAuthEAP 1.3.6.1.4.1.2435.2.4.3.100.11.11.12
Wireless LAN authenticate EAP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER eapMD5(1), eapTLS(2), eapTTLS(3), peap(4), leap(5), eapfast-none(6), eapfast-mschapv2(7), eapfast-gtc(8), eapfast-tls(9)  

brpsWLanAuthUserID 1.3.6.1.4.1.2435.2.4.3.100.11.11.13
Wireless LAN authenticate user ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

brpsWLanAuthUserPass 1.3.6.1.4.1.2435.2.4.3.100.11.11.14
Wireless LAN authenticate user password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

brpsWLanAssociate 1.3.6.1.4.1.2435.2.4.3.100.11.11.21
Wireless LAN associate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER update(1), print(2), test(3), applyonly(4), simplewizard(5)  

brpsWLanAssociateTestResult 1.3.6.1.4.1.2435.2.4.3.100.11.11.22
Wireless LAN associate test result. 0 indicates cleared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER linkOK(1), noSuchWLan(2), invalidWLanNetKey(3), invalidAuthUserID(4), invalidAuthUserPass(5)  

brpsWLanAssociateResult 1.3.6.1.4.1.2435.2.4.3.100.11.11.23
Wireless LAN associate result. 0 indicates cleared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER linkOK(1), noSuchWLan(2), invalidWLanNetKey(3), invalidAuthUserID(4), invalidAuthUserPass(5)  

brpsWLanAssociateTestSupported 1.3.6.1.4.1.2435.2.4.3.100.11.11.24
0 indicates the Wireless network Associate Test function is not supported. 1 indicates the Wireless network Associate Test function is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsWLanWepKeyDefaultIndex 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.1
The value of brpsWLanWepKeyIndex corresponding to the default setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brpsWLanWepKeyTable 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11
This table represents WEP KEY Info.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrpsWLanWepKeyEntry

brpsWLanWepKeyEntry 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1
A row in the brpsWLanWepKeyTable table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrpsWLanWepKeyEntry  

brpsWLanWepKeyIndex 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

brpsWLanWepKeySize 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.2
The WEP KEY size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER size40(1), size104(2)  

brpsWLanWepKeyType 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.3
The WEP KEY type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER hex(1), ascii(2)  

brpsWLanWepKey 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.4
The WEP KEY.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brpsWLanNetworkKey 1.3.6.1.4.1.2435.2.4.3.100.11.11.102.1
The WPA-PSK.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brpsWLanTKIPChangeInterval 1.3.6.1.4.1.2435.2.4.3.100.11.11.103.1
TKIP Interval (s)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brpsWLanLEAPTimeout 1.3.6.1.4.1.2435.2.4.3.100.11.11.104.1
Leap timeout (s)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brpsWLanOperatingMode 1.3.6.1.4.1.2435.2.4.3.100.21.1.1
The mode which is actually operating. off(0), dot11a(1), dot11b(2), dot11g(3)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsWLanRSSLevel 1.3.6.1.4.1.2435.2.4.3.100.21.1.2
Wireless LAN RSS Level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..5  

brpsWLanCommSpeed 1.3.6.1.4.1.2435.2.4.3.100.21.1.3
Wireless LAN communication speed. However, the unit is 1/10.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

brpsWLanOperatingChannel 1.3.6.1.4.1.2435.2.4.3.100.21.1.4
Wireless LAN operating channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsWLanOperatingName 1.3.6.1.4.1.2435.2.4.3.100.21.1.5
Wireless LAN operating SSID Name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brpsWLanOperatingCommMode 1.3.6.1.4.1.2435.2.4.3.100.21.1.6
Wireless LAN operating communication mode. off(0), infrastructure(1), ad-Hoc-WiFi(2), ad-Hoc(3)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsWLanOperatingEncryptMode 1.3.6.1.4.1.2435.2.4.3.100.21.1.7
Wireless LAN operating encrypt mode. off(0), none(1), wep(2), tkip(3), aes(4), ckip(5)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsWLanOperatingAuthMode 1.3.6.1.4.1.2435.2.4.3.100.21.1.8
Wireless LAN operating authenticate mode. off(0), openSystem(1), sharedKey(2), wpa-psk(3), wpa-none(4), wpa(5), wpa2(6), leap(7), eapfast-none(8), eapfast-mschapv2(9), eapfast-gtc(10), eapfast-tls(11), wpa2-psk(12)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brpsWLanOperatingWepKeyDefaultIndex 1.3.6.1.4.1.2435.2.4.3.100.21.1.9
Wireless LAN operating WepKeyDefaultIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brMultiIFSupported 1.3.6.1.4.1.2435.2.4.4.1240.1.1
0 indicates the Multi Interface is not supported. 1 indicates Multi Interface is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFActiveIF 1.3.6.1.4.1.2435.2.4.4.1240.1.2
1 LAN 2 Wireless LAN 3 Both
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lan(1), wirelesslan(2), both(3)  

brMultiIFAllSetDefault 1.3.6.1.4.1.2435.2.4.4.1240.1.3
Setting the value resets all parameters to their factory default value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

brMultiIFCount 1.3.6.1.4.1.2435.2.4.4.1240.1.4
MultiIF Count
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brMultiIFConfigureTable 1.3.6.1.4.1.2435.2.4.4.1240.1.5
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFConfigureEntry

brMultiIFConfigureEntry 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFConfigureEntry  

brMultiIFConfigureIndex 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

brMultiIFType 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.2
Interface Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lan(1), wirelesslan(2)  

brMultiIFDescription 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.3
Interface Description
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

brMultiIFNodeName 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.4
An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brMultiIFInterfaceEnable 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.5
0 indicates the Interfase is not enabled. 1 indicates the Interfase is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFEnetMode 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.6
Ethernet type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4  

brMultiIFHardwareType 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.7
Hardware type of the print server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

brMultiIFNodeType 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.8
A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

brMultiIFInterfaceEnableImmediate 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.9
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFPrimaryInterface 1.3.6.1.4.1.2435.2.4.4.1240.1.6
Primary Interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brMultiIFInterfaceInformation 1.3.6.1.4.1.2435.2.4.4.1240.1.7
0bit Auto 1bit manual 2bit enable both 3bit disable both
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brMultiIFDNSTable 1.3.6.1.4.1.2435.2.4.4.99.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFDNSEntry

brMultiIFDNSEntry 1.3.6.1.4.1.2435.2.4.4.99.1.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFDNSEntry  

brMultiIFTCPIPDNSIPSetup 1.3.6.1.4.1.2435.2.4.4.99.1.1.1.1
DNS mode 1:static 2:auto
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER static(1), auto(2)  

brMultiIFPrimaryDNSIPAddress 1.3.6.1.4.1.2435.2.4.4.99.1.1.1.2
Primary DNS IP Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brMultiIFSecondaryDNSIPAddress 1.3.6.1.4.1.2435.2.4.4.99.1.1.1.3
Secondary DNS IP Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brMultiIFTCPIPConnectTime 1.3.6.1.4.1.2435.2.4.4.99.1.1.1.4
TCP/IP connect time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brMultiIFControlTable 1.3.6.1.4.1.2435.2.4.4.1240.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFControlEntry

brMultiIFControlEntry 1.3.6.1.4.1.2435.2.4.4.1240.2.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFControlEntry  

brMultiIFSetDefault 1.3.6.1.4.1.2435.2.4.4.1240.2.1.1.1
Setting the value resets all parameters to their factory default value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

brMultiIFServiceTable 1.3.6.1.4.1.2435.2.4.4.1240.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFServiceEntry

brMultiIFServiceEntry 1.3.6.1.4.1.2435.2.4.4.1240.4.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFServiceEntry  

brMultiIFServiceCount 1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.1
Number of services on this print server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..128  

brMultiIFServiceStringLimit 1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.2
Maximum number of service strings supported by the print server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..127  

brMultiIFServiceStringCount 1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.3
Number of service strings currently defined on the print server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brMultiIFServiceFilterCount 1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.4
Number of service filters implemented by the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brMultiIFServiceInfoTable 1.3.6.1.4.1.2435.2.4.4.1240.4.2
This table represents the attributes of a service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFServiceInfoEntry

brMultiIFServiceInfoEntry 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1
A row in the services table. Rows cannot be created or deleted via direct SNMP operations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFServiceInfoEntry  

brMultiIFServiceIndex 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.1
The service number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

brMultiIFServiceName 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.2
The service name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

brMultiIFServicePort 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.3
The port number assigned to this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

brMultiIFServiceFilter 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.4
Filter number assigned to this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brMultiIFServiceBOT 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.5
Beginning of text string number assigned to this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brMultiIFServiceEOT 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.6
End of text string number assigned to this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brMultiIFServiceMatch 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.7
Match string number assigned to this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brMultiIFServiceReplace 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.8
Replace string number assigned to this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brMultiIFServiceTCPPort 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.9
TCP Port number assigned to this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

brMultiIFServiceNDSTree 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.10
The NDS Tree.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..48)  

brMultiIFServiceNDSContext 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.11
The NDS Context in Unicode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

brMultiIFServiceVines 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.12
The Vines StreetTalk name for this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..48)  

brMultiIFServiceObsolete 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.13
Obsolete parameter that is no longer used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..127  

brMultiIFServiceNetwareServerCount 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.14
The number of Netware servers enabled on this service. Modifying the value will truncate the server list to the specified number of servers. If the value set is greater than the number of servers currently on the list, then the list will be unchanged.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..127  

brMultiIFServiceReceiveOnly 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.15
When enabled, the service will only receive data, any printer responses will be discarded.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFServiceTCPQueued 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.16
When enabled, the raw TCP connections to the port will be queued while waiting for the port to become available
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFServiceProtocolLAT 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.17
When enabled, the LAT protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFServiceProtocolTCPIP 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.18
When enabled, the TCP/IP protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFServiceProtocolNetware 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.19
When enabled, the Netware protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFServiceProtocolAppleTalk 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.20
When enabled, the AppleTalk protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFServiceProtocolBanyan 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.21
When enabled, the Banyan protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFServiceProtocolDLC 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.22
When enabled, the DLC protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFServiceProtocolNetBEUI 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.23
When enabled, the NetBEUI protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFServiceNetwareServerMode 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.24
Netware mode for this service. 0 = Queue Server, 1 = Remote Printer
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFServiceNetwareRemotePrinterNum 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.25
Remote Printer Number for this service
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

brMultiIFServiceProtocolIPP 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.26
When enabled, the IPP protocol will be available on this service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFServiceAppleTalkType 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.27
AppleTalk type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

brMultiIFServiceStringInfoTable 1.3.6.1.4.1.2435.2.4.4.1240.4.3
This table represents the service BOT/EOT/MATCH/REPLACE strings defined.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFServiceStringInfoEntry

brMultiIFServiceStringInfoEntry 1.3.6.1.4.1.2435.2.4.4.1240.4.3.1
A row in the service string table. Rows cannot be created or deleted via direct SNMP operations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFServiceStringInfoEntry  

brMultiIFServiceStringIndex 1.3.6.1.4.1.2435.2.4.4.1240.4.3.1.1
The string number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

brMultiIFServiceString 1.3.6.1.4.1.2435.2.4.4.1240.4.3.1.2
The character string definition suitable for displaying.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

brMultiIFTCPIPTable 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFTCPIPEntry

brMultiIFTCPIPEntry 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFTCPIPEntry  

brMultiIFTCPIPAddress 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.1
IP Address assigned to the print server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brMultiIFTCPIPSubnetMask 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.2
Subnet mask assigned to the print server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brMultiIFTCPIPGateway 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.3
Gateway/Router address assigned to the print server
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brMultiIFTCPIPMethod 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.4
Method used to determine the IP Address. AUTO tries all protocols. STATIC uses the configured address. DHCP, BOOTP, and RARP use only that protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

brMultiIFTCPIPUpdate 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.5
Hardware MAC address to be updated. This value is write only. Will read back as zeros.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

brMultiIFTCPIPTimeout 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.6
Timeout used for LPD connections.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

brMultiIFTCPIPBootTries 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.7
Number of attempts to use BOOTP, RARP, and DHCP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

brMultiIFTCPIPRARPNoSubnet 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.8
If enabled, do not set the subnet mask based on the RARP response.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFTCPIPRARPNoGateway 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.9
If enabled, do not set the gateway/router address based on the RARP response.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFTCPIPUseMethod 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.10
Method type that used set up TCP/IP configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

brMultiIFTCPIPMethodServer 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.11
If TCP/IP configuration is setted up by any protocol server, this entry indicates the IP address of the server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brMultiIFNetBIOSTable 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFNetBIOSEntry

brMultiIFNetBIOSEntry 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFNetBIOSEntry  

brMultiIFNetBIOSIPMethod 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.1
Method used to determine the IP Address of the WINS server. AUTO tries all protocols (currently only DHCP is tried). STATIC uses the configured address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFTCPIPNetBIOSPrimaryWINSAddr 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.2
The IP Address of the primary WINS server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brMultiIFTCPIPNetBIOSSecondaryWINSAddr 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.3
The IP Address of the secondary WINS server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

brMultiIFNetBEUIDomain 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.4
The NetBEUI domain name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..15)  

brMultiIFAPIPATable 1.3.6.1.4.1.2435.2.4.4.1240.5.12.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFAPIPAEntry

brMultiIFAPIPAEntry 1.3.6.1.4.1.2435.2.4.4.1240.5.12.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFAPIPAEntry  

brMultiIFAPIPASupported 1.3.6.1.4.1.2435.2.4.4.1240.5.12.1.1.1
0 indicates the APIPA protocol is not supported. 1 indicates APIPA support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFAPIPAEnable 1.3.6.1.4.1.2435.2.4.4.1240.5.12.1.1.2
0 indicates the APIPA protocol is not enabled. 1 indicates that the APIPA protocol is enabled. Writing a non-zero value will enable the APIPA protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFLAATable 1.3.6.1.4.1.2435.2.4.4.1240.5.14.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFLAAEntry

brMultiIFLAAEntry 1.3.6.1.4.1.2435.2.4.4.1240.5.14.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFLAAEntry  

brMultiIFLAASupported 1.3.6.1.4.1.2435.2.4.4.1240.5.14.1.1.1
This value indicate if the locally administered addressing is supported. 0: Not Supported 1: Supported
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brMultiIFLAAMacAddress 1.3.6.1.4.1.2435.2.4.4.1240.5.14.1.1.2
A locally administered address (LAA) that replaces the factory-assigned MAC address (UAA: universally administered address). If this setting is all-zero address (i.e. 6 bytes of zeros), the factory-assigned MAC address is used as the MAC address of the device. The LAA address must start with X2, X6, XA, or XE, where X is any hexadecimal digit 0 to F.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

brMultiIFIPv6AddressCountTable 1.3.6.1.4.1.2435.2.4.4.1240.5.15.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFIPv6AddressCountEntry

brMultiIFIPv6AddressCountEntry 1.3.6.1.4.1.2435.2.4.4.1240.5.15.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFIPv6AddressCountEntry  

brMultiIFIPv6AddressCount 1.3.6.1.4.1.2435.2.4.4.1240.5.15.1.1.1
IPv6Address Counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brMultiIFIPv6AddressTable 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFIPv6AddressEntry

brMultiIFIPv6AddressEntry 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFIPv6AddressEntry  

brMultiIFIPv6AddressIndex 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.1
index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

brMultiIFIPv6Address 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  Ipv6Address  

brMultiIFIPv6UseMethod 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.3
Method type that used set up TCP/IP configuration. 0: Unknown (Information not supported) 1: Manually 2: DHCPv6 3: Stateless Address Auto-configuration 4: Reserved 5: Link Local
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

brMultiIFIPv6MethodServer 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.4
If TCP/IP configuration is setted up by any protocol server, this entry indicates the IP address of the server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

brMultiIFIPv6StaticAddressCountTable 1.3.6.1.4.1.2435.2.4.4.1240.5.15.3
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFIPv6StaticAddressCountEntry

brMultiIFIPv6StaticAddressCountEntry 1.3.6.1.4.1.2435.2.4.4.1240.5.15.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFIPv6StaticAddressCountEntry  

brMultiIFIPv6StaticAddressCount 1.3.6.1.4.1.2435.2.4.4.1240.5.15.3.1.1
IPv6StaticAddress Counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brMultiIFIPv6StaticAddressTable 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFIPv6StaticAddressEntry

brMultiIFIPv6StaticAddressEntry 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFIPv6StaticAddressEntry  

brMultiIFIPv6StaticAddressIndex 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.1
index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

brMultiIFIPv6StaticAddressEnable 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.2
index
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brMultiIFIPv6StaticAddress 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.3
IPv6 Static Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  Ipv6Address  

brMultiIFIPv6StaticAddressPrefixLength 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.4
IPv6Address Prefix Length
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brMultiIFDNSIPv6AddressTable 1.3.6.1.4.1.2435.2.4.4.1240.5.15.5
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFDNSIPv6AddressEntry

brMultiIFDNSIPv6AddressEntry 1.3.6.1.4.1.2435.2.4.4.1240.5.15.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFDNSIPv6AddressEntry  

brMultiIFPrimaryDNSIPv6Address 1.3.6.1.4.1.2435.2.4.4.1240.5.15.5.1.1
Primary DNS IPv6 Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  Ipv6Address  

brMultiIFSecondaryDNSIPv6Address 1.3.6.1.4.1.2435.2.4.4.1240.5.15.5.1.2
Secondary DNS IPv6 Address
Status: mandatory Access: read-write
OBJECT-TYPE    
  Ipv6Address  

brMultiIFWebServicesTable 1.3.6.1.4.1.2435.2.4.4.1240.5.16.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrMultiIFWebServicesEntry

brMultiIFWebServicesEntry 1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrMultiIFWebServicesEntry  

brMultiIFWebServicesName 1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

brMultiIFWebServicesInstanceID 1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

brMultiIFWebServicesMetadataVersion 1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

brLdapSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.19.1
0 indicates the LDAP client is not supported. 1 indicates the LDAP client is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brLdapEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.19.2
0 indicates the LDAP client is not enabled. 1 indicates that the LDAP client is enabled. Writing a non-zero value will enable the Ldap if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brLdapTimeout 1.3.6.1.4.1.2435.2.4.3.2435.5.19.3
timeout value (sec) for LDAP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32767  

brLdapTimeoutSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.19.4
0 indicates the LDAP timeout is not supported. 1 indicates the LDAP timeout is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brLdapServerCount 1.3.6.1.4.1.2435.2.4.3.2435.5.19.11
Maximum number of LDAP Server INDEX.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brLdapServerInfoTable 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12
This table represents LDAP Server Info.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrLdapServerInfoEntry

brLdapServerInfoEntry 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1
A row in the LdapServerInfo table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrLdapServerInfoEntry  

brLdapServerInfoIndex 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brLdapServerName 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.2
The LDAP server name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

brLdapServerPort 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.3
The LDAP server port number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

brLdapServerAuth 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.4
The LDAP server authentication method.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER anonymous(1), simple(2), kerberos(3)  

brLdapServerUserDN 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.5
The LDAP server user DN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

brLdapServerPassword 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.6
The LDAP server password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

brLdapServerPasswordSet 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.7
Returns 1 if the LDAP server password is set, 0 if not set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brLdapServerBaseDN 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.8
The LDAP server base DN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

brLdapServerAttrEMail 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.10
The LDAP server attribute or e-mail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

brLdapServerAttrFAXNumber 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.11
The LDAP server attribute or facsimile telephone number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

brLdapServerAttrDetail1 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.12
The LDAP server attribute or detail 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

brLdapServerAttrDetail2 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.13
The LDAP server attribute or detail 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

brLdapServerAttrDetail3 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.14
The LDAP server attribute or detail 3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

brLdapServerAttrDetail4 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.15
The LDAP server attribute or detail 4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

brLdapServerAttrDetailEnable1 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.16
Enable flag of the LDAP server attribute of detail 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brLdapServerAttrDetailEnable2 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.17
Enable flag of the LDAP server attribute of detail 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brLdapServerAttrDetailEnable3 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.18
Enable flag of the LDAP server attribute of detail 3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brLdapServerAttrDetailEnable4 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.19
Enable flag of the LDAP server attribute of detail 4.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brLdapServerAttrNameCount 1.3.6.1.4.1.2435.2.4.3.2435.5.19.21
Maximum number of LDAP Server Attribute of name INDEX.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brLdapServerAttrNameTable 1.3.6.1.4.1.2435.2.4.3.2435.5.19.22
This table represents LDAP Server Attribute of name.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrLdapServerAttrNameEntry

brLdapServerAttrNameEntry 1.3.6.1.4.1.2435.2.4.3.2435.5.19.22.1
A row in the LdapServerAttributeName table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrLdapServerAttrNameEntry  

brLdapServerAttrNameIndex 1.3.6.1.4.1.2435.2.4.3.2435.5.19.22.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

brLdapServerAttrName 1.3.6.1.4.1.2435.2.4.3.2435.5.19.22.1.2
The LDAP server attribute of name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

brLdapSetDefault 1.3.6.1.4.1.2435.2.4.3.2435.5.19.99
Setting the value resets all LDAP parameters to their factory default value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

brFuncLockSettingInit 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.1
Init Function Lock Setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brFuncLockAdminPassword 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.2
Get or Set the administrator password of Function Lock.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

brFuncLock 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.3
Get or Set the status of Function Lock.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2  

brFuncLockPublicFuncCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.4
Return the number of functions to be locked on the public mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

brFuncLockUserCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.6
Return the number of users to be locked on function lock.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

brFuncLockUserTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrFuncLockUserEntry

brFuncLockPublicTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrFuncLockPublicEntry

brFuncLockPublicEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrFuncLockPublicEntry  

brFuncLockUserEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrFuncLockUserEntry  

brFuncLockPublicFuncIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.1
Return the index value of functions to be locked on the public mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

brFuncLockPublicFuncMember 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.2
Return the member of functions to be locked on the public mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER copycolor(1), copybr(2), faxtx(3), faxrx(4), scan(5), print(6), pcc(7)  

brFuncLockPublicFuncSupported 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.3
Return the status of availableness of functions to be locked on the public mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brFuncLockPublicFuncEnable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.4
Get of Set the status of functions on the public mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brFuncLockUserIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1.1
Return the index value of users to be locked on function lock.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

brFuncLockUserName 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1.2
Get or Set the user name of function lock.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

brFuncLockUserPassword 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1.3
Get or Set the user password of function lock.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

brFuncLockUserFuncCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.8
Return the number of users to be locked on the function lock.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

brFuncLockUserFuncTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrFuncLockUserFuncEntry

brFuncLockUserFuncEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrFuncLockUserFuncEntry  

brFuncLockUserFuncIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.1
Return the index value of users to be locked on user mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

brFuncLockUserFuncMember 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.2
Return the function numbers to be locked on user mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER copycolor(1), copybr(2), faxtx(3), faxrx(4), scan(5), print(6), pcc(7)  

brFuncLockUserFuncSupported 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.3
Return the availableness of function to be locked on user mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brFuncLockUserFuncEnable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.4
Get or Set the lock status on the user mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brFuncLockSetting 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.10
Write the all information of function lock.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brNetRemoteSetUpFileFormat 1.3.6.1.4.1.2435.2.3.9.2.101.1.11.3
It is a file format of the Net Remote Setup function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rms(1), rmd(2), rmsrmd(3)  

brInfoAlertVersion 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.25
It indicates the version that prtAlertLocation is implemented correctly.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brInfoBlackPrint 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.26
It indicates black only print enable/disable info 0: disable 1: enable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brpsWLanCapabilityAuthEAPSupportAuthentication 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.5
put supported authentication protocol as bit. 1bit:802.1X 2bit:WPA 3bit:WPA2 4bit:CCKM
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

brpsWLanCapabilityAuthEAPSupportEncryption 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.6
put supported encryption as bit. 1bit:WEP 2bit:CKIP 3bit:TKIP 4bit:AES
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

brLdapKerberosServerName 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.20
The Kerberos server name for LDAP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

brLdapKerberosServerPort 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.21
The Kerberos server port number for LDAP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

brKerberosSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.27.1
0 indicates the Kerberos protocol is not supported. 1 indicates Kerberos support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brCIFSSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.28.1
0 indicates the CIFS protocol is not supported. 1 indicates CIFS support is implemented by the firmware
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brCIFSEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.28.2
0 indicates the CIFS protocol is not enabled. 1 indicates that the CIFS protocol is enabled. Writing a non-zero value will enable the CIFS protocol if it is supported by the firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brSNMPV3Supported 1.3.6.1.4.1.2435.2.4.3.2435.5.18.10
0 indicates SNMPv3 is not supported. 1 indicates SNMPv3 is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brSNMPCommMode 1.3.6.1.4.1.2435.2.4.3.2435.5.18.11
1 indicates v1/v2c read-write access is enable. 2 indicates v3 read-write access is enable. 3 indicates v1/v2c read-only access and v3 read-write access is enable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..3  

brSNMPV3UserName 1.3.6.1.4.1.2435.2.4.3.2435.5.18.12
The username of SNMPv3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

brSNMPV3KeyType 1.3.6.1.4.1.2435.2.4.3.2435.5.18.13
1 indicates that the key type of SNMPv3 is ASCII. 2 indicates that the key type of SNMPv3 is HEX
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2  

brSNMPV3AuthKey 1.3.6.1.4.1.2435.2.4.3.2435.5.18.14
The authentication key of SNMPv3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

brSNMPV3AuthPassword 1.3.6.1.4.1.2435.2.4.3.2435.5.18.15
The authentication password of SNMPv3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..16)  

brSNMPV3PrivKey 1.3.6.1.4.1.2435.2.4.3.2435.5.18.16
The privacy key of SNMPv3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

brSNMPV3PrivPassword 1.3.6.1.4.1.2435.2.4.3.2435.5.18.17
The privacy password of SNMPv3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..16)  

brSNMPV3ContextName 1.3.6.1.4.1.2435.2.4.3.2435.5.18.18
The contextname of SNMPv3.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

brSNTPCSupported 1.3.6.1.4.1.2435.2.4.3.2435.5.29.1
0 indicates the SNTP is not supported. 1 indicates SNTP is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brSNTPCEnable 1.3.6.1.4.1.2435.2.4.3.2435.5.29.2
0 indicates the SNTP is not disabled. 1 indicates that the SNTP is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brSNTPCSyncMethod 1.3.6.1.4.1.2435.2.4.3.2435.5.29.4
1 indicates Synchronous Method is AUTO. 2 indicates Synchronous Method is STATIC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2  

brSNTPCIntervalMin 1.3.6.1.4.1.2435.2.4.3.2435.5.29.5
The minimum value of synchronous interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..168  

brSNTPCInterval 1.3.6.1.4.1.2435.2.4.3.2435.5.29.6
The synchronous interval is used for synchronous method INTERVAL.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..168  

brSNTPCSyncResult 1.3.6.1.4.1.2435.2.4.3.2435.5.29.7
The result of the last checking time. 1: Success 2: Synchronizing 3: Failed 4: Not yet checking
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

brSNTPCPrimaryServerName 1.3.6.1.4.1.2435.2.4.3.2435.5.29.8
The primary server name of SNTP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

brSNTPCPrimaryServerPort 1.3.6.1.4.1.2435.2.4.3.2435.5.29.9
The port number of primary SNTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

brSNTPCSecondaryServerName 1.3.6.1.4.1.2435.2.4.3.2435.5.29.10
The secondary server name of SNTP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

brSNTPCSecondaryServerPort 1.3.6.1.4.1.2435.2.4.3.2435.5.29.11
The port number of secondary SNTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

brSNTPCServerMethod 1.3.6.1.4.1.2435.2.4.3.2435.5.29.3
1 indicates SNTP Server Method is AUTO. 2 indicates SNTP Server Method is STATIC. 3 indicates SNTP Server Method is PRESET.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..3  

brPJLInfoFirmwareUpdateconfigTable 1.3.6.1.4.1.2435.2.4.3.99.3.1.6
This table represents PJLInfoFirmwareUpdateconfig.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrPJLInfoFirmwareUpdateconfigEntry

brPJLInfoFirmwareUpdateconfigEntry 1.3.6.1.4.1.2435.2.4.3.99.3.1.6.1
A row in the PJLInfoFirmwareUpdateconfig table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrPJLInfoFirmwareUpdateconfigEntry  

brPJLInfoFirmwareUpdateconfigIndex 1.3.6.1.4.1.2435.2.4.3.99.3.1.6.1.1
The number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

brPJLInfoFirmwareUpdateconfig 1.3.6.1.4.1.2435.2.4.3.99.3.1.6.1.2
The PJLInfoFirmwareUpdateconfig.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

brFirmwareUpdateKeywordCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.1
The number of Firmware for update the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

brFirmwareUpdateKeywordTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2
The table represents the number of Firmware for Update.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrFirmwareUpdateKeywordEntry

brFirmwareUpdateKeywordEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2.1
A row in the FirmwareUpdateKeyword table. Rows cannot be created or deleted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrFirmwareUpdateKeywordEntry  

brFirmwareUpdateKeywordIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

brFirmwareUpdateKeyword 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2.1.2
The keyword for firemware update the device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

brFuncLockUserPrintPageCounterReset 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.20
Reset all user's counter of Color/Mono print page.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..0  

brFuncLockPublicPrintLimitEnable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.21
This MIB represents Enable/Disable of print limit setting for public user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brFuncLockPublicPrintPageMax 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.22
The Maximum of print limited for public user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..999999  

brFuncLockUserPrintPageTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrFuncLockUserPrintPageEntry

brFuncLockUserPrintPageEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrFuncLockUserPrintPageEntry  

brFuncLockUserPrintPageCountMono 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.3
The Counter of Monochrome Print Page for user.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..999999  

brFuncLockUserPrintPageCountColor 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.4
The counter of color print page for user.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..999999  

brFuncLockPublicPrintPageCountColor 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.24
The counter of color print page for public user.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..999999  

brFuncLockPcLoginNameAuthEnable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.26
This MIB represents Enable/Disable of PC Login Authentication setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brFuncLockPcLoginNameAuthCount 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.27
The number of PC Login Name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

brFuncLockPcLoginNameTable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrFuncLockPcLoginNameEntry

brFuncLockPcLoginNameEntry 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrFuncLockPcLoginNameEntry  

brFuncLockPcLoginNameAuthIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..50  

brFuncLockPcLoginName 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1.2
The PC Login Name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

brFuncLockPcLoginNameAuthID 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1.3
PC Login ID for PC Login name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..25  

brFuncLockPublicPrintPageCountMono 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.23
The counter of monochrome print page.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..999999  

brFuncLockUserPrintPageIndex 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

brFuncLockUserPrintPageLimitEnable 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.2
The Maximum of Print Page setting for user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

brFuncLockUserPrintPageMax 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.5
The Maximum of print limited for user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..999999  

brFuncLockPublicPrintPageCountMonoLast 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.29
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..999999  

brFuncLockPublicPrintPageCountColorLast 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.30
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..999999  

brFuncLockUserPrintPageCountMonoLast 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.6
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..999999  

brFuncLockUserPrintPageCountColorLast 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.7
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..999999  

brFuncLockAutoCountResetFrequency 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

brFuncLockAutoCountResetTime 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2..2)  

brFuncLockAutoCountResetWeek 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..7  

brFuncLockAutoCountResetDate 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..31  

brWlanSimpleWizardSupported 1.3.6.1.4.1.2435.2.4.3.100.1.15.1
WLAN Simple Wizard support information. 0 indicates Simple Wizard is not supported. 1 indicates Simple Wizard is supported.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

brWlanSimpleWizardPassword 1.3.6.1.4.1.2435.2.4.3.100.1.15.2
Simple Wizard Password. Max size 64
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor