C-PRODUCT-DS3-MIB

File: C-PRODUCT-DS3-MIB.mib (8414 bytes)

Imported modules

C-PRODUCT-GROUP-MIB C-PRODUCT-BASE-MIB RFC1155-SMI
RFC-1212

Imported symbols

ds3card portSlot portNumber
TimeAndDate Gauge OBJECT-TYPE

Defined Types

Ds3PortEntry  
SEQUENCE    
  ds3PortLoopbackType INTEGER
  ds3PortLboLength INTEGER
  ds3PortPeakRate INTEGER
  ds3PortFraming INTEGER
  ds3PortCellMap INTEGER
  ds3PortScramble INTEGER
  ds3PortTiming INTEGER
  ds3PortPlcpTiming INTEGER
  ds3PortCtxTiming INTEGER
  ds3PortFeacLoopback INTEGER
  ds3PortLineRate INTEGER

Ds3PortStatsEntry  
SEQUENCE    
  ds3PortRxCells Gauge
  ds3PortTxCells Gauge
  ds3PortIdleUnassignedCells Gauge
  ds3PortHCSErrorCells Gauge
  ds3PortResetTimeDate TimeAndDate
  ds3PortResetStats INTEGER
  ds3PortUtilRxCells INTEGER
  ds3PortUtilTxCells INTEGER

Ds3PortClearStatsEntry  
SEQUENCE    
  ds3PortResetPMData INTEGER

Defined Values

ds3Port 1.3.6.1.4.1.43.1.12.1.1.11.1
OBJECT IDENTIFIER    

ds3PortStats 1.3.6.1.4.1.43.1.12.1.1.11.2
OBJECT IDENTIFIER    

ds3PortClearStats 1.3.6.1.4.1.43.1.12.1.1.11.3
OBJECT IDENTIFIER    

ds3PortTable 1.3.6.1.4.1.43.1.12.1.1.11.1.1
The DS3 port information table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ds3PortEntry

ds3PortEntry 1.3.6.1.4.1.43.1.12.1.1.11.1.1.1
Information about a DS3 port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ds3PortEntry  

ds3PortLoopbackType 1.3.6.1.4.1.43.1.12.1.1.11.1.1.1.1
Loopback type of the DS3 port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), networkLine(2), localCard(3), networkCard(4)  

ds3PortLboLength 1.3.6.1.4.1.43.1.12.1.1.11.1.1.1.2
Cable length for the DS3 port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER lessThan255(1), moreThan255(2)  

ds3PortPeakRate 1.3.6.1.4.1.43.1.12.1.1.11.1.1.1.3
Peak data transfer rate of the DS3 port. Unit: Mbps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 5..41  

ds3PortFraming 1.3.6.1.4.1.43.1.12.1.1.11.1.1.1.4
Cbit or M23 framing for the DS3 port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cbit(1), m23(2)  

ds3PortCellMap 1.3.6.1.4.1.43.1.12.1.1.11.1.1.1.5
ATM cell mapping for the DS3 port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), plcp(2)  

ds3PortScramble 1.3.6.1.4.1.43.1.12.1.1.11.1.1.1.6
ATM payload scrambling for the DS3 port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds3PortTiming 1.3.6.1.4.1.43.1.12.1.1.11.1.1.1.7
DS3 timing source.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER loop(1), system(2)  

ds3PortPlcpTiming 1.3.6.1.4.1.43.1.12.1.1.11.1.1.1.8
PLCP timing source for the DS3 port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ds3Timing(1), systemClock(2)  

ds3PortCtxTiming 1.3.6.1.4.1.43.1.12.1.1.11.1.1.1.9
CTX timing source from the DS3 port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER plcpClock(1), ds3rxClock(2)  

ds3PortFeacLoopback 1.3.6.1.4.1.43.1.12.1.1.11.1.1.1.10
FEAC loopback for the DS3 port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

ds3PortLineRate 1.3.6.1.4.1.43.1.12.1.1.11.1.1.1.11
Physical Line data transfer rate of the DS3 port. Unit: CPS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ds3PortStatsTable 1.3.6.1.4.1.43.1.12.1.1.11.2.1
The DS3 port stats information table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ds3PortStatsEntry

ds3PortStatsEntry 1.3.6.1.4.1.43.1.12.1.1.11.2.1.1
Information about a DS3 port stats.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ds3PortStatsEntry  

ds3PortRxCells 1.3.6.1.4.1.43.1.12.1.1.11.2.1.1.1
The counter associated with the received cells, encountered on the ATM interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

ds3PortTxCells 1.3.6.1.4.1.43.1.12.1.1.11.2.1.1.2
The counter associated with the transmitted cells, encountered on the ATM interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

ds3PortIdleUnassignedCells 1.3.6.1.4.1.43.1.12.1.1.11.2.1.1.3
The counter associated with the idle/unassigned cells, encountered on the ATM interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

ds3PortHCSErrorCells 1.3.6.1.4.1.43.1.12.1.1.11.2.1.1.4
The counter associated with the HCS errored cells, encountered on the ATM interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

ds3PortResetTimeDate 1.3.6.1.4.1.43.1.12.1.1.11.2.1.1.5
The reset time and date of ATM stats on this ATM interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeAndDate  

ds3PortResetStats 1.3.6.1.4.1.43.1.12.1.1.11.2.1.1.6
This field is used to reset the atm statistics for the ds3 port. If a get is performed on this command, the result will always be zero
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER reset(1)  

ds3PortUtilRxCells 1.3.6.1.4.1.43.1.12.1.1.11.2.1.1.7
The Utilization of received Cell is calculated as received cells divided by Line Rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ds3PortUtilTxCells 1.3.6.1.4.1.43.1.12.1.1.11.2.1.1.8
The Utilization of transmitted Cell is calculated as transmitted cells divided by Line Rate.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ds3PortClearStatsTable 1.3.6.1.4.1.43.1.12.1.1.11.3.1
This table is used to reset the performance monitoring data for ds3 port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ds3PortClearStatsEntry

ds3PortClearStatsEntry 1.3.6.1.4.1.43.1.12.1.1.11.3.1.1
Information about a DS3 port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ds3PortClearStatsEntry  

ds3PortResetPMData 1.3.6.1.4.1.43.1.12.1.1.11.3.1.1.1
This field is used to reset the performance monitoring data for the ds3 port. If a get is performed on this command, the result will always be zero
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER reset(1)