CAIUXOS

File: CAIUXOS.mib (181117 bytes)

Imported modules

RFC-1215 RFC1155-SMI RFC1213-MIB

Imported symbols

TRAP-TYPE OBJECT-TYPE Counter
Gauge enterprises DisplayString

Defined Types

UxsStatusCPUSequence  
SEQUENCE    
  uxsStatusCPUName DisplayString
  uxsStatusCPUUser INTEGER
  uxsStatusCPUSys INTEGER
  uxsStatusCPUIdle INTEGER
  uxsStatusCPUWIO INTEGER
  uxsStatusCPUAggStatus INTEGER
  uxsStatusCPUUsedValue INTEGER
  uxsStatusCPULagValue INTEGER
  uxsStatusCPULag INTEGER
  uxsStatusCPUWarn INTEGER
  uxsStatusCPUCrit INTEGER
  uxsStatusCPUMonitor INTEGER
  uxsStatusCPUStatus INTEGER
  uxsStatusCPULossAction INTEGER
  uxsStatusCPULossStatus INTEGER

UxsStatusSwapSequence  
SEQUENCE    
  uxsStatusSwapName DisplayString
  uxsStatusSwapAggStatus INTEGER
  uxsStatusSwapAvailable INTEGER
  uxsStatusSwapUsedValue INTEGER
  uxsStatusSwapLagValue INTEGER
  uxsStatusSwapLag INTEGER
  uxsStatusSwapWarnValue INTEGER
  uxsStatusSwapCritValue INTEGER
  uxsStatusSwapWarn INTEGER
  uxsStatusSwapCrit INTEGER
  uxsStatusSwapMonitor INTEGER
  uxsStatusSwapStatus INTEGER
  uxsStatusSwapLossAction INTEGER
  uxsStatusSwapLossStatus INTEGER

UxsStatusFSysSequence  
SEQUENCE    
  uxsStatusFSysName DisplayString
  uxsStatusFSysRelatedTo DisplayString
  uxsStatusFSysType DisplayString
  uxsStatusFSysStatus INTEGER
  uxsStatusFSysSpaceTotal INTEGER
  uxsStatusFSysSpaceValue INTEGER
  uxsStatusFSysSpaceWarnValue DisplayString
  uxsStatusFSysSpaceCritValue DisplayString
  uxsStatusFSysSpaceWarn DisplayString
  uxsStatusFSysSpaceCrit DisplayString
  uxsStatusFSysSpaceMonitor INTEGER
  uxsStatusFSysSpaceStatus INTEGER
  uxsStatusFSysSpaceDValue INTEGER
  uxsStatusFSysSpaceDWarnValue DisplayString
  uxsStatusFSysSpaceDCritValue DisplayString
  uxsStatusFSysSpaceDWarn DisplayString
  uxsStatusFSysSpaceDCrit DisplayString
  uxsStatusFSysSpaceDMonitor INTEGER
  uxsStatusFSysSpaceDStatus INTEGER
  uxsStatusFSysInodesTotal INTEGER
  uxsStatusFSysInodesValue INTEGER
  uxsStatusFSysInodesWarnValue DisplayString
  uxsStatusFSysInodesCritValue DisplayString
  uxsStatusFSysInodesWarn DisplayString
  uxsStatusFSysInodesCrit DisplayString
  uxsStatusFSysInodesMonitor INTEGER
  uxsStatusFSysInodesStatus INTEGER
  uxsStatusFSysInodesDValue INTEGER
  uxsStatusFSysInodesDWarnValue DisplayString
  uxsStatusFSysInodesDCritValue DisplayString
  uxsStatusFSysInodesDWarn DisplayString
  uxsStatusFSysInodesDCrit DisplayString
  uxsStatusFSysInodesDMonitor INTEGER
  uxsStatusFSysInodesDStatus INTEGER
  uxsStatusFSysMountedMonitor INTEGER
  uxsStatusFSysMountedStatus INTEGER
  uxsStatusFSysLossAction INTEGER
  uxsStatusFSysLossStatus INTEGER
  uxsStatusFSysRemove INTEGER

UxsStatusDiskSequence  
SEQUENCE    
  uxsStatusDiskName DisplayString
  uxsStatusDiskAggStatus INTEGER
  uxsStatusDiskTPutValue INTEGER
  uxsStatusDiskTPutWarn INTEGER
  uxsStatusDiskTPutCrit INTEGER
  uxsStatusDiskTPutMonitor INTEGER
  uxsStatusDiskTPutStatus INTEGER
  uxsStatusDiskLossAction INTEGER
  uxsStatusDiskLossStatus INTEGER
  uxsStatusDiskRemove INTEGER

UxsStatusFileSequence  
SEQUENCE    
  uxsStatusFileName DisplayString
  uxsStatusFileDesc DisplayString
  uxsStatusFileStatus INTEGER
  uxsStatusFileExist INTEGER
  uxsStatusFileExistMonitor INTEGER
  uxsStatusFileExistStatus INTEGER
  uxsStatusFileModTime INTEGER
  uxsStatusFileModTimeValue INTEGER
  uxsStatusFileModTimeMonitor INTEGER
  uxsStatusFileModTimeStatus INTEGER
  uxsStatusFileSizeValue INTEGER
  uxsStatusFileSizeWarn INTEGER
  uxsStatusFileSizeCrit INTEGER
  uxsStatusFileSizeMonitor INTEGER
  uxsStatusFileSizeStatus INTEGER
  uxsStatusFileSizeDValue INTEGER
  uxsStatusFileSizeDWarn INTEGER
  uxsStatusFileSizeDCrit INTEGER
  uxsStatusFileSizeDMonitor INTEGER
  uxsStatusFileSizeDStatus INTEGER
  uxsStatusFileRemove INTEGER

UxsStatusProcSequence  
SEQUENCE    
  uxsStatusProcName DisplayString
  uxsStatusProcPath DisplayString
  uxsStatusProcArgs DisplayString
  uxsStatusProcUsers DisplayString
  uxsStatusProcPIDs DisplayString
  uxsStatusProcStatus INTEGER
  uxsStatusProcInstValue INTEGER
  uxsStatusProcInstMin INTEGER
  uxsStatusProcInstMax INTEGER
  uxsStatusProcInstMonitor INTEGER
  uxsStatusProcInstStatus INTEGER
  uxsStatusProcChldValue INTEGER
  uxsStatusProcChldMin INTEGER
  uxsStatusProcChldMax INTEGER
  uxsStatusProcChldMonitor INTEGER
  uxsStatusProcChldStatus INTEGER
  uxsStatusProcSizeValue INTEGER
  uxsStatusProcSizeMin INTEGER
  uxsStatusProcSizeMax INTEGER
  uxsStatusProcSizeMonitor INTEGER
  uxsStatusProcSizeStatus INTEGER
  uxsStatusProcCPUValue INTEGER
  uxsStatusProcCPUWarn INTEGER
  uxsStatusProcCPUCrit INTEGER
  uxsStatusProcCPUMonitor INTEGER
  uxsStatusProcCPUStatus INTEGER
  uxsStatusProcRemove INTEGER

UxsStatusPrnSequence  
SEQUENCE    
  uxsStatusPrnName DisplayString
  uxsStatusPrnDesc DisplayString
  uxsStatusPrnAggStatus INTEGER
  uxsStatusPrnItemsValue INTEGER
  uxsStatusPrnItemsWarn INTEGER
  uxsStatusPrnItemsCrit INTEGER
  uxsStatusPrnItemsMonitor INTEGER
  uxsStatusPrnItemsStatus INTEGER
  uxsStatusPrnLossAction INTEGER
  uxsStatusPrnLossStatus INTEGER
  uxsStatusPrnRemove INTEGER

UxsStatusNetSequence  
SEQUENCE    
  uxsStatusNetName DisplayString
  uxsStatusNetIP DisplayString
  uxsStatusNetStatus INTEGER
  uxsStatusNetIPktValue INTEGER
  uxsStatusNetIPktWarn INTEGER
  uxsStatusNetIPktCrit INTEGER
  uxsStatusNetIPktMonitor INTEGER
  uxsStatusNetIPktStatus INTEGER
  uxsStatusNetIErrValue INTEGER
  uxsStatusNetIErrWarn INTEGER
  uxsStatusNetIErrCrit INTEGER
  uxsStatusNetIErrMonitor INTEGER
  uxsStatusNetIErrStatus INTEGER
  uxsStatusNetOPktValue INTEGER
  uxsStatusNetOPktWarn INTEGER
  uxsStatusNetOPktCrit INTEGER
  uxsStatusNetOPktMonitor INTEGER
  uxsStatusNetOPktStatus INTEGER
  uxsStatusNetOErrValue INTEGER
  uxsStatusNetOErrWarn INTEGER
  uxsStatusNetOErrCrit INTEGER
  uxsStatusNetOErrMonitor INTEGER
  uxsStatusNetOErrStatus INTEGER
  uxsStatusNetCollValue INTEGER
  uxsStatusNetCollWarn INTEGER
  uxsStatusNetCollCrit INTEGER
  uxsStatusNetCollMonitor INTEGER
  uxsStatusNetCollStatus INTEGER
  uxsStatusNetLossAction INTEGER
  uxsStatusNetLossStatus INTEGER

UxsStatusIPCMQSequence  
SEQUENCE    
  uxsStatusIPCMQID DisplayString
  uxsStatusIPCMQKey DisplayString
  uxsStatusIPCMQMode DisplayString
  uxsStatusIPCMQOwner DisplayString
  uxsStatusIPCMQGroup DisplayString
  uxsStatusIPCMQBytesAvailable INTEGER
  uxsStatusIPCMQBytesValue INTEGER
  uxsStatusIPCMQBytesLagValue INTEGER
  uxsStatusIPCMQBytesLag INTEGER
  uxsStatusIPCMQBytesWarnValue DisplayString
  uxsStatusIPCMQBytesCritValue DisplayString
  uxsStatusIPCMQBytesWarn DisplayString
  uxsStatusIPCMQBytesCrit DisplayString
  uxsStatusIPCMQBytesMonitor INTEGER
  uxsStatusIPCMQBytesStatus INTEGER

UxsAvailFSysSequence  
SEQUENCE    
  uxsAvailFSysName DisplayString
  uxsAvailFSysRelatedTo DisplayString
  uxsAvailFSysType DisplayString

UxsAvailDiskSequence  
SEQUENCE    
  uxsAvailDiskName DisplayString

UxsAvailPrnSequence  
SEQUENCE    
  uxsAvailPrnName DisplayString

UxsPollNetSequence  
SEQUENCE    
  uxsPollNetName DisplayString
  uxsPollNetIP DisplayString
  uxsPollNetIPktValue INTEGER
  uxsPollNetIErrValue INTEGER
  uxsPollNetOPktValue INTEGER
  uxsPollNetOErrValue INTEGER
  uxsPollNetCollValue INTEGER

UxsPollIPCSHMSequence  
SEQUENCE    
  uxsPollIPCSHMID DisplayString
  uxsPollIPCSHMKey DisplayString
  uxsPollIPCSHMMode DisplayString
  uxsPollIPCSHMOwner DisplayString
  uxsPollIPCSHMGroup DisplayString
  uxsPollIPCSHMMaxSize INTEGER
  uxsPollIPCSHMAttached INTEGER

UxsPollIPCSEMSequence  
SEQUENCE    
  uxsPollIPCSEMID DisplayString
  uxsPollIPCSEMKey DisplayString
  uxsPollIPCSEMMode DisplayString
  uxsPollIPCSEMOwner DisplayString
  uxsPollIPCSEMGroup DisplayString
  uxsPollIPCSEMMaxNums INTEGER

Defined Values

cai 1.3.6.1.4.1.791
OBJECT IDENTIFIER    

caiSysMgr 1.3.6.1.4.1.791.2
OBJECT IDENTIFIER    

agentWorks 1.3.6.1.4.1.791.2.9
OBJECT IDENTIFIER    

unix 1.3.6.1.4.1.791.2.9.4
OBJECT IDENTIFIER    

caiUxOs 1.3.6.1.4.1.791.2.9.4.5
OBJECT IDENTIFIER    

uxsConfigGroup 1.3.6.1.4.1.791.2.9.4.5.1
OBJECT IDENTIFIER    

uxsStatusGroup 1.3.6.1.4.1.791.2.9.4.5.2
OBJECT IDENTIFIER    

uxsAvailableGroup 1.3.6.1.4.1.791.2.9.4.5.3
OBJECT IDENTIFIER    

uxsPollGroup 1.3.6.1.4.1.791.2.9.4.5.4
OBJECT IDENTIFIER    

uxsConfigGeneralGroup 1.3.6.1.4.1.791.2.9.4.5.1.1
OBJECT IDENTIFIER    

uxsConfigSysGroup 1.3.6.1.4.1.791.2.9.4.5.1.2
OBJECT IDENTIFIER    

uxsConfigCPUGroup 1.3.6.1.4.1.791.2.9.4.5.1.3
OBJECT IDENTIFIER    

uxsConfigLoadGroup 1.3.6.1.4.1.791.2.9.4.5.1.4
OBJECT IDENTIFIER    

uxsConfigMemGroup 1.3.6.1.4.1.791.2.9.4.5.1.5
OBJECT IDENTIFIER    

uxsConfigSwapGroup 1.3.6.1.4.1.791.2.9.4.5.1.6
OBJECT IDENTIFIER    

uxsConfigFSysGroup 1.3.6.1.4.1.791.2.9.4.5.1.7
OBJECT IDENTIFIER    

uxsConfigDiskGroup 1.3.6.1.4.1.791.2.9.4.5.1.8
OBJECT IDENTIFIER    

uxsConfigFileGroup 1.3.6.1.4.1.791.2.9.4.5.1.9
OBJECT IDENTIFIER    

uxsConfigProcGroup 1.3.6.1.4.1.791.2.9.4.5.1.10
OBJECT IDENTIFIER    

uxsConfigPrnGroup 1.3.6.1.4.1.791.2.9.4.5.1.11
OBJECT IDENTIFIER    

uxsConfigNetGroup 1.3.6.1.4.1.791.2.9.4.5.1.12
OBJECT IDENTIFIER    

uxsConfigIPCGroup 1.3.6.1.4.1.791.2.9.4.5.1.13
OBJECT IDENTIFIER    

uxsStatusGeneralGroup 1.3.6.1.4.1.791.2.9.4.5.2.1
OBJECT IDENTIFIER    

uxsStatusCPUGroup 1.3.6.1.4.1.791.2.9.4.5.2.2
OBJECT IDENTIFIER    

uxsStatusLoadGroup 1.3.6.1.4.1.791.2.9.4.5.2.3
OBJECT IDENTIFIER    

uxsStatusMemGroup 1.3.6.1.4.1.791.2.9.4.5.2.4
OBJECT IDENTIFIER    

uxsStatusSwapGroup 1.3.6.1.4.1.791.2.9.4.5.2.5
OBJECT IDENTIFIER    

uxsStatusFSysGroup 1.3.6.1.4.1.791.2.9.4.5.2.6
OBJECT IDENTIFIER    

uxsStatusDiskGroup 1.3.6.1.4.1.791.2.9.4.5.2.7
OBJECT IDENTIFIER    

uxsStatusFileGroup 1.3.6.1.4.1.791.2.9.4.5.2.8
OBJECT IDENTIFIER    

uxsStatusProcGroup 1.3.6.1.4.1.791.2.9.4.5.2.9
OBJECT IDENTIFIER    

uxsStatusPrnGroup 1.3.6.1.4.1.791.2.9.4.5.2.10
OBJECT IDENTIFIER    

uxsStatusNetGroup 1.3.6.1.4.1.791.2.9.4.5.2.11
OBJECT IDENTIFIER    

uxsStatusIPCGroup 1.3.6.1.4.1.791.2.9.4.5.2.12
OBJECT IDENTIFIER    

uxsAvailFSysRefresh 1.3.6.1.4.1.791.2.9.4.5.3.1
&Set this value to refresh(2) to check the operating system for recently configured file systems. The user can not set the value to none(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

uxsAvailFSysTable 1.3.6.1.4.1.791.2.9.4.5.3.2
&The table containing a list of file systems that are currently known to the agent and are available for monitoring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UxsAvailFSysSequence

uxsAvailDiskRefresh 1.3.6.1.4.1.791.2.9.4.5.3.3
&Set this value to refresh(2) to check the operating system for recently configured physical disks. The user can not set the value to none(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

uxsAvailDiskTable 1.3.6.1.4.1.791.2.9.4.5.3.4
&The table containing a list of physical disks that are currently known to the agent and are available for monitoring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UxsAvailDiskSequence

uxsAvailPrnRefresh 1.3.6.1.4.1.791.2.9.4.5.3.5
&Set this value to refresh(2) to check the operating system for recently configured printers or printer queues. The user can not set the value to none(1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

uxsAvailPrnTable 1.3.6.1.4.1.791.2.9.4.5.3.6
&The table containing a list of printers and printer queues that are currently known to the agent and are available for monitoring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UxsAvailPrnSequence

uxsPollNetGroup 1.3.6.1.4.1.791.2.9.4.5.4.1
OBJECT IDENTIFIER    

uxsPollIPCGroup 1.3.6.1.4.1.791.2.9.4.5.4.2
OBJECT IDENTIFIER    

uxsConfigGeneralAgentVersion 1.3.6.1.4.1.791.2.9.4.5.1.1.1
&The version of the agent that is running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralColdStartTime 1.3.6.1.4.1.791.2.9.4.5.1.1.2
&The date/time the agent was started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralWarmStartTime 1.3.6.1.4.1.791.2.9.4.5.1.1.3
&The date/time that the agent was last reconfigured through the SNMP interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralCPUPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.4
&The last date/time that the CPU information was polled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralLoadPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.5
&The last date/time that the load average information was polled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralMemPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.6
&The last date/time that the real memory information was polled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralSwapPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.7
&The last date/time that the swap information was polled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralFSysPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.8
&The last date/time that the file system information was polled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralDiskPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.9
&The last date/time that the physical disk information was polled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralFilePollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.10
&The last date/time that the file information was polled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralProcPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.11
&The last date/time that the process information was polled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralPrnPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.12
&The last date/time that the printer queue information was polled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralNetPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.13
&The last date/time that the Network Interface was polled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigGeneralIPCPollTime 1.3.6.1.4.1.791.2.9.4.5.1.1.14
&The last date/time that the Inter Process Communication information was polled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigSysNodeName 1.3.6.1.4.1.791.2.9.4.5.1.2.1
&The name of the UNIX node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigSysSystemName 1.3.6.1.4.1.791.2.9.4.5.1.2.2
&The name of the operating system installed on the machine.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigSysRelease 1.3.6.1.4.1.791.2.9.4.5.1.2.3
&The release of the operating system installed on the machine.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigSysVersion 1.3.6.1.4.1.791.2.9.4.5.1.2.4
&The version of the operating system installed on the machine.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigSysHardware 1.3.6.1.4.1.791.2.9.4.5.1.2.5
&The name of the hardware type of the machine.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigSysBootTime 1.3.6.1.4.1.791.2.9.4.5.1.2.6
&The date/time the machine was booted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigSysRunLevel 1.3.6.1.4.1.791.2.9.4.5.1.2.7
&The run level of the machine at the time the agent started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsConfigCPUPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.3.1
&The time, in seconds, between the collections of the CPU information. Valid ranges: -1 (Suspended), 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigCPUPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.3.2
&Defines if the CPU information is collected. Valid values: disable(1) or use-polling-period(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigCPULag 1.3.6.1.4.1.791.2.9.4.5.1.3.3
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigCPUWarn 1.3.6.1.4.1.791.2.9.4.5.1.3.4
&The value for CPU usage, as a percentage, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than 99, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigCPUCrit 1.3.6.1.4.1.791.2.9.4.5.1.3.5
&The value for CPU usage, as a percentage, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than 100, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigCPUMonitor 1.3.6.1.4.1.791.2.9.4.5.1.3.6
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigCPULossAction 1.3.6.1.4.1.791.2.9.4.5.1.3.7
&Defines the action to take if the CPU is removed from the machine. Valid values: remove(1), up(2) or down(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsConfigLoadPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.4.1
&The time, in seconds, between the collections of the load average information. Valid ranges: -1 (Suspended), 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigLoadPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.4.2
&Defines whether the load average information is collected. Valid values: disable(1) or use-polling-period(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigMemPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.5.1
&The time, in seconds, between the collections of the real memory information. Valid ranges: -1 (Suspended), 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigMemPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.5.2
&Defines whether the real memory information is collected. Valid values: disable(1) or use-polling-period(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigSwapPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.6.1
&The time, in seconds, between the collections of the swap usage information. Valid ranges: -1 (Suspended), 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigSwapPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.6.2
&Defines whether the swap usage information is collected. Valid values: disable(1) or use-polling-period(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigSwapLag 1.3.6.1.4.1.791.2.9.4.5.1.6.3
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigSwapWarn 1.3.6.1.4.1.791.2.9.4.5.1.6.4
&The value for used swap space, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total swap - 1, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigSwapCrit 1.3.6.1.4.1.791.2.9.4.5.1.6.5
&The value for used swap space, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total swap, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigSwapMonitor 1.3.6.1.4.1.791.2.9.4.5.1.6.6
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigSwapLossAction 1.3.6.1.4.1.791.2.9.4.5.1.6.7
&Defines the action to take if the swap partition is removed from the machine. Valid values: remove(1), up(2) or down(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsConfigFSysPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.7.1
&The time, in seconds, between the collections of the file system information. Valid ranges: -1 (Suspended), 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigFSysPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.7.2
&Defines whether the file system information is collected. Valid values: disable(1) or use-polling-period(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigFSysSpaceWarn 1.3.6.1.4.1.791.2.9.4.5.1.7.3
&The value for file system space, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than file system size - 1, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysSpaceCrit 1.3.6.1.4.1.791.2.9.4.5.1.7.4
&The value for file system space, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than file system size, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysSpaceMonitor 1.3.6.1.4.1.791.2.9.4.5.1.7.5
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigFSysSpaceDWarn 1.3.6.1.4.1.791.2.9.4.5.1.7.6
&The value for file system delta space, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysSpaceDCrit 1.3.6.1.4.1.791.2.9.4.5.1.7.7
&The value for file system delta space, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysSpaceDMonitor 1.3.6.1.4.1.791.2.9.4.5.1.7.8
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigFSysInodesWarn 1.3.6.1.4.1.791.2.9.4.5.1.7.9
&The value for inodes, either as a percentage or absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total inodes - 1, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysInodesCrit 1.3.6.1.4.1.791.2.9.4.5.1.7.10
&The value for inodes, either as percentage or absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total inodes, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysInodesMonitor 1.3.6.1.4.1.791.2.9.4.5.1.7.11
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigFSysInodesDWarn 1.3.6.1.4.1.791.2.9.4.5.1.7.12
&The value for inodes delta, either as a percentage or absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysInodesDCrit 1.3.6.1.4.1.791.2.9.4.5.1.7.13
&The value for inodes delta, either as a percentage or absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysInodesDMonitor 1.3.6.1.4.1.791.2.9.4.5.1.7.14
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigFSysMountedMonitor 1.3.6.1.4.1.791.2.9.4.5.1.7.15
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsConfigFSysLossAction 1.3.6.1.4.1.791.2.9.4.5.1.7.16
&Defines the action to take if the file system is removed from the file system table. Valid values: remove(1), up(2) or down(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsConfigFSysNameAdd 1.3.6.1.4.1.791.2.9.4.5.1.7.17
&Defines the name of the file system watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFSysNameRemove 1.3.6.1.4.1.791.2.9.4.5.1.7.18
&Defines the name of the file system watcher to remove.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigDiskPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.8.1
&The time, in seconds, between the collections of the physical disk information. Valid ranges: -1 (Suspended), 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigDiskPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.8.2
&Defines whether the physical disk information is collected. Valid values: disable(1) or use-polling-period(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigDiskTPutWarn 1.3.6.1.4.1.791.2.9.4.5.1.8.3
&The value for physical disk throughput in kilobytes per second that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigDiskTPutCrit 1.3.6.1.4.1.791.2.9.4.5.1.8.4
&The value for physical disk throughput in kilobytes per second that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigDiskTPutMonitor 1.3.6.1.4.1.791.2.9.4.5.1.8.5
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigDiskLossAction 1.3.6.1.4.1.791.2.9.4.5.1.8.6
&Defines the action to take if the physical disk is removed from the machine. Valid values: remove(1), up(2) or down(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsConfigDiskNameAdd 1.3.6.1.4.1.791.2.9.4.5.1.8.7
&Defines the name of the physical disk watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigDiskNameRemove 1.3.6.1.4.1.791.2.9.4.5.1.8.8
&Defines the name of the physical disk watcher to remove.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFilePollInterval 1.3.6.1.4.1.791.2.9.4.5.1.9.1
&The time, in seconds, between the collections of the file information. Valid ranges: -1 (Suspended), 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigFilePollMethod 1.3.6.1.4.1.791.2.9.4.5.1.9.2
&Defines whether the file information is collected. Valid values: disable(1) or use-polling-period(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigFileDesc 1.3.6.1.4.1.791.2.9.4.5.1.9.3
&The description associated with the file watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFileExist 1.3.6.1.4.1.791.2.9.4.5.1.9.4
&The type of existence monitoring to apply to the file watcher. Valid values: should-exist(1) or should-not-exist(2)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

uxsConfigFileExistMonitor 1.3.6.1.4.1.791.2.9.4.5.1.9.5
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsConfigFileModTimeMonitor 1.3.6.1.4.1.791.2.9.4.5.1.9.6
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsConfigFileSizeWarn 1.3.6.1.4.1.791.2.9.4.5.1.9.7
&The value for file size, either as a percentage of the total or as an absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFileSizeCrit 1.3.6.1.4.1.791.2.9.4.5.1.9.8
&The value for file size, either as a percentage of the total or as an absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFileSizeMonitor 1.3.6.1.4.1.791.2.9.4.5.1.9.9
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigFileSizeDWarn 1.3.6.1.4.1.791.2.9.4.5.1.9.10
&The value for file size delta, either as a percentage of the total or as an absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFileSizeDCrit 1.3.6.1.4.1.791.2.9.4.5.1.9.11
&The value for file size delta, either as a percentage of the total or as an absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFileSizeDMonitor 1.3.6.1.4.1.791.2.9.4.5.1.9.12
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigFileNameAdd 1.3.6.1.4.1.791.2.9.4.5.1.9.13
&Defines the name of the file watcher to add.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigFileNameRemove 1.3.6.1.4.1.791.2.9.4.5.1.9.14
&Defines the name of the file watcher to remove.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigProcPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.10.1
&The time, in seconds, between the collections of the process information. Valid ranges: -1 (Suspended), 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigProcPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.10.2
&Defines whether the process information is collected. Valid values: disable(1) or use-polling-period(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigProcPath 1.3.6.1.4.1.791.2.9.4.5.1.10.3
&The path of the process to match. Valid values are a string with an optional * at the end of the string for wild card matching.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigProcArgs 1.3.6.1.4.1.791.2.9.4.5.1.10.4
&A section of the processes arguments to match.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigProcUsers 1.3.6.1.4.1.791.2.9.4.5.1.10.5
&List of users to match. Format details of the string are documented in the online help.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigProcInstMin 1.3.6.1.4.1.791.2.9.4.5.1.10.6
&Minimum number of instances expected to match the key. Valid values: -1, 0 or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigProcInstMax 1.3.6.1.4.1.791.2.9.4.5.1.10.7
&Maximum number of instances expected to match the key. Valid values: -1, 0 or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigProcInstMonitor 1.3.6.1.4.1.791.2.9.4.5.1.10.8
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsConfigProcChldMin 1.3.6.1.4.1.791.2.9.4.5.1.10.9
&Minimum number of children (based on lowest for all instances). Valid values: -1, 0 or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigProcChldMax 1.3.6.1.4.1.791.2.9.4.5.1.10.10
&Maximum number of children (based on highest for all instances). Valid values: -1, 0 or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigProcChldMonitor 1.3.6.1.4.1.791.2.9.4.5.1.10.11
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsConfigProcSizeMin 1.3.6.1.4.1.791.2.9.4.5.1.10.12
&Minimum size in kilobytes (based on lowest for all instances). Valid values: -1, 0 or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigProcSizeMax 1.3.6.1.4.1.791.2.9.4.5.1.10.13
&Maximum size in kilobytes (based on highest for all instances). Valid values: -1, 0 or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigProcSizeMonitor 1.3.6.1.4.1.791.2.9.4.5.1.10.14
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsConfigProcCPUWarn 1.3.6.1.4.1.791.2.9.4.5.1.10.15
&The percentage of used CPU that is considered a warning level for that resource. Valid ranges: Greater than 0, less than 100, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigProcCPUCrit 1.3.6.1.4.1.791.2.9.4.5.1.10.16
&The percentage of used CPU, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than or equal to 100, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigProcCPUMonitor 1.3.6.1.4.1.791.2.9.4.5.1.10.17
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigProcNameAdd 1.3.6.1.4.1.791.2.9.4.5.1.10.18
&The name of the process to monitor. Valid values are a string with an optional * at the end of the string for wild card matching. Note: Setting this attribute causes the watcher to be added.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigProcNameRemove 1.3.6.1.4.1.791.2.9.4.5.1.10.19
&The process name of the watcher to delete. Set this attribute with the other KEY fields. Setting this causes the delete action.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigProcNameSig 1.3.6.1.4.1.791.2.9.4.5.1.10.20
&The number of significant bytes that the agent uses for matching the process name against.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsConfigProcPathSig 1.3.6.1.4.1.791.2.9.4.5.1.10.21
&The number of significant bytes that the agent uses for matching the process path against.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsConfigProcArgsSig 1.3.6.1.4.1.791.2.9.4.5.1.10.22
&The number of significant bytes that the agent uses for matching the process arguments against.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsConfigPrnPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.11.1
&The time, in seconds, between the collections of the printer queue information. Valid ranges: -1 (Suspended), 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigPrnPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.11.2
&Defines whether the printer queue information is collected. Valid values: disable(1) or use-polling-period(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigPrnDesc 1.3.6.1.4.1.791.2.9.4.5.1.11.3
&Description of the printer queue watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigPrnItemsWarn 1.3.6.1.4.1.791.2.9.4.5.1.11.4
&The number of items on the printer queue that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigPrnItemsCrit 1.3.6.1.4.1.791.2.9.4.5.1.11.5
&The number of items on the printer queue that is considered a critical level for that resource. Valid ranges: Greater than 0, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigPrnItemsMonitor 1.3.6.1.4.1.791.2.9.4.5.1.11.6
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigPrnLossAction 1.3.6.1.4.1.791.2.9.4.5.1.11.7
&Defines the action to take if the printer queue configuration is removed from the machine. Valid values: remove(1), up(2) or down(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsConfigPrnNameAdd 1.3.6.1.4.1.791.2.9.4.5.1.11.8
&Setting this attribute causes a new watcher to be added for the printer queue name specified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigPrnNameRemove 1.3.6.1.4.1.791.2.9.4.5.1.11.9
&Setting this attribute causes the watcher with the printer queue name specified to be deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigNetPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.12.1
&The time, in seconds, between the collections of the Network Interface information. Valid ranges: -1 (Suspended), 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigNetPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.12.2
&Defines whether the Network Interface information is collected. Valid values: disable(1) or use-polling-period(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigNetIPktWarn 1.3.6.1.4.1.791.2.9.4.5.1.12.3
&The number of input packets per second that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigNetIPktCrit 1.3.6.1.4.1.791.2.9.4.5.1.12.4
&The number of input packets per second that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigNetIPktMonitor 1.3.6.1.4.1.791.2.9.4.5.1.12.5
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigNetIErrWarn 1.3.6.1.4.1.791.2.9.4.5.1.12.6
&The number of input errors per second that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigNetIErrCrit 1.3.6.1.4.1.791.2.9.4.5.1.12.7
&The number of input errors per second that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigNetIErrMonitor 1.3.6.1.4.1.791.2.9.4.5.1.12.8
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigNetOPktWarn 1.3.6.1.4.1.791.2.9.4.5.1.12.9
&The number of output packets per second that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigNetOPktCrit 1.3.6.1.4.1.791.2.9.4.5.1.12.10
&The number of output packets per second that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigNetOPktMonitor 1.3.6.1.4.1.791.2.9.4.5.1.12.11
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigNetOErrWarn 1.3.6.1.4.1.791.2.9.4.5.1.12.12
&The number of output errors per second that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigNetOErrCrit 1.3.6.1.4.1.791.2.9.4.5.1.12.13
&The number of output errors per second that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigNetOErrMonitor 1.3.6.1.4.1.791.2.9.4.5.1.12.14
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigNetCollWarn 1.3.6.1.4.1.791.2.9.4.5.1.12.15
&The number of collisions per second that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigNetCollCrit 1.3.6.1.4.1.791.2.9.4.5.1.12.16
&The number of collisions per second that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigNetCollMonitor 1.3.6.1.4.1.791.2.9.4.5.1.12.17
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsConfigNetLossAction 1.3.6.1.4.1.791.2.9.4.5.1.12.18
&Defines the action to take if the Network Interface is removed from the machine. Valid values: remove(1), up(2) or down(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsConfigIPCPollInterval 1.3.6.1.4.1.791.2.9.4.5.1.13.1
&The time, in seconds, between the collections of the Inter Process Communications information. Valid ranges: -1 (Suspended), 30 seconds or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigIPCPollMethod 1.3.6.1.4.1.791.2.9.4.5.1.13.2
&Defines whether the Inter Process Communications information is collected. Valid values: disable(1) or use-polling-period(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), use-polling-period(2)  

uxsConfigIPCMQBytesLag 1.3.6.1.4.1.791.2.9.4.5.1.13.3
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsConfigIPCMQBytesWarn 1.3.6.1.4.1.791.2.9.4.5.1.13.4
&The value for used message queue bytes that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigIPCMQBytesCrit 1.3.6.1.4.1.791.2.9.4.5.1.13.5
&The value for used message queue bytes that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsConfigIPCMQBytesMonitor 1.3.6.1.4.1.791.2.9.4.5.1.13.6
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusGeneralTotalCount 1.3.6.1.4.1.791.2.9.4.5.2.1.1
&Total number of resources that the agent is configured to monitor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralTotalWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.2
&Total number of the resources that the agent is configured to monitor that are in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralTotalCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.3
&Total number of the resources that the agent is configured to monitor that are in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralCPUCount 1.3.6.1.4.1.791.2.9.4.5.2.1.4
&The total number of this resource type that are being monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralCPUWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.5
&The total number of this resource type that are being monitored and are in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralCPUCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.6
&The total number of this resource type that are being monitored and are in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralLoadCount 1.3.6.1.4.1.791.2.9.4.5.2.1.7
&The total number of this resource type that are being monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralLoadWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.8
&The total number of this resource type that are being monitored and are in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralLoadCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.9
&The total number of this resource type that are being monitored and are in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralMemCount 1.3.6.1.4.1.791.2.9.4.5.2.1.10
&The total number of this resource type that are being monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralMemWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.11
&The total number of this resource type that are being monitored and are in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralMemCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.12
&The total number of this resource type that are being monitored and are in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralSwapCount 1.3.6.1.4.1.791.2.9.4.5.2.1.13
&The total number of this resource type that are being monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralSwapWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.14
&The total number of this resource type that are being monitored and are in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralSwapCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.15
&The total number of this resource type that are being monitored and are in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralFSysCount 1.3.6.1.4.1.791.2.9.4.5.2.1.16
&The total number of this resource type that are being monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralFSysWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.17
&The total number of this resource type that are being monitored and are in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralFSysCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.18
&The total number of this resource type that are being monitored and are in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralDiskCount 1.3.6.1.4.1.791.2.9.4.5.2.1.19
&The total number of this resource type that are being monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralDiskWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.20
&The total number of this resource type that are being monitored and are in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralDiskCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.21
&The total number of this resource type that are being monitored and are in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralFileCount 1.3.6.1.4.1.791.2.9.4.5.2.1.22
&The total number of this resource type that are being monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralFileWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.23
&The total number of this resource type that are being monitored and are in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralFileCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.24
&The total number of this resource type that are being monitored and are in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralProcCount 1.3.6.1.4.1.791.2.9.4.5.2.1.25
&The total number of this resource type that are being monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralProcWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.26
&The total number of this resource type that are being monitored and are in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralProcCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.27
&The total number of this resource type that are being monitored and are in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralPrnCount 1.3.6.1.4.1.791.2.9.4.5.2.1.28
&The total number of this resource type that are being monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralPrnWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.29
&The total number of this resource type that are being monitored and are in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralPrnCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.30
&The total number of this resource type that are being monitored and are in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralNetCount 1.3.6.1.4.1.791.2.9.4.5.2.1.31
&The total number of this resource type that are being monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralNetWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.32
&The total number of this resource type that are being monitored and are in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralNetCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.33
&The total number of this resource type that are being monitored and are in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralIPCCount 1.3.6.1.4.1.791.2.9.4.5.2.1.34
&The total number of this resource type that are being monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralIPCWarning 1.3.6.1.4.1.791.2.9.4.5.2.1.35
&The total number of this resource type that are being monitored and are in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusGeneralIPCCritical 1.3.6.1.4.1.791.2.9.4.5.2.1.36
&The total number of this resource type that are being monitored and are in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTotalName 1.3.6.1.4.1.791.2.9.4.5.2.2.1
&The name the agent gives for the total number of CPUs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusCPUTotalUser 1.3.6.1.4.1.791.2.9.4.5.2.2.2
&The percentage of time that the CPUs spent servicing user requests.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTotalSys 1.3.6.1.4.1.791.2.9.4.5.2.2.3
&The percentage of time that the CPUs spent servicing system requests.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTotalIdle 1.3.6.1.4.1.791.2.9.4.5.2.2.4
&The percentage of time that the CPUs were idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTotalWIO 1.3.6.1.4.1.791.2.9.4.5.2.2.5
&The percentage of time that the CPUs spent waiting for blocking I/O requests.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTotalUsedValue 1.3.6.1.4.1.791.2.9.4.5.2.2.6
&The total percentage of the CPUs' time that the processors were busy. i.e. 100 - idle%.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTotalLagValue 1.3.6.1.4.1.791.2.9.4.5.2.2.7
&The number of times that the threshold has been reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTotalLag 1.3.6.1.4.1.791.2.9.4.5.2.2.8
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTotalWarn 1.3.6.1.4.1.791.2.9.4.5.2.2.9
&The percentage of total CPU usage that is considered a warning level for that resource. Valid ranges: Greater than 0, less than 99, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusCPUTotalCrit 1.3.6.1.4.1.791.2.9.4.5.2.2.10
&The percentage of total CPU usage that is considered a critical level for that resource. Valid ranges: Greater than 1, less than 100, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusCPUTotalMonitor 1.3.6.1.4.1.791.2.9.4.5.2.2.11
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusCPUTotalStatus 1.3.6.1.4.1.791.2.9.4.5.2.2.12
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusCPUCount 1.3.6.1.4.1.791.2.9.4.5.2.2.13
&The number of CPU instances in the table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUTable 1.3.6.1.4.1.791.2.9.4.5.2.2.14
&The table of CPU instances.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusCPUSequence

uxsStatusCPUEntry 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1
&
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UxsStatusCPUSequence  

uxsStatusCPUName 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.1
&The name the agent gives the first CPU on which it gets details. No assumptions should be made about which slot the CPU is in from the CPU name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusCPUUser 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.2
&The percentage of time that the processor was doing user work.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUSys 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.3
&The percentage of time that the processor was doing system work.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUIdle 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.4
&The percentage of time that the processor was idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUWIO 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.5
&The percentage of time that the processor was waiting for I/O.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUAggStatus 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.6
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold, down(5) - The resource is in a down state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4), down(5)  

uxsStatusCPUUsedValue 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.7
&The percentage of time that the processor was busy. i.e. 100 - idle%.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusCPULagValue 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.8
&The number of times that the threshold has been reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusCPULag 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.9
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusCPUWarn 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.10
&The value for the CPU used percentage that is considered a warning level for that resource. Valid ranges: Greater than 0, less than 99, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusCPUCrit 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.11
&The value for the CPU used percentage that is considered a critical level for that resource. Valid ranges: Greater than 1, less than 100, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusCPUMonitor 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.12
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusCPUStatus 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.13
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusCPULossAction 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.14
&Defines the action to take if the CPU is removed from the machine. Valid values: remove(1), up(2) or down(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsStatusCPULossStatus 1.3.6.1.4.1.791.2.9.4.5.2.2.14.1.15
&The status relating to the existence of the object. Valid values: unknown(1), up(2) or down(3).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusLoad1MinValue 1.3.6.1.4.1.791.2.9.4.5.2.3.1
&The current 1 minute average value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad1MinWarn 1.3.6.1.4.1.791.2.9.4.5.2.3.2
&The value for load average that is considered a warning level for that resource. Valid ranges: Greater than 0.000000, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad1MinCrit 1.3.6.1.4.1.791.2.9.4.5.2.3.3
&The value for load average that is considered a critical level for that resource. Valid ranges: Greater than 0.000001, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad1MinMonitor 1.3.6.1.4.1.791.2.9.4.5.2.3.4
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusLoad1MinStatus 1.3.6.1.4.1.791.2.9.4.5.2.3.5
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusLoad5MinValue 1.3.6.1.4.1.791.2.9.4.5.2.3.6
&The current 5 minute average value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad5MinWarn 1.3.6.1.4.1.791.2.9.4.5.2.3.7
&The value for load average that is considered a warning level for that resource. Valid ranges: Greater than 0.000000, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad5MinCrit 1.3.6.1.4.1.791.2.9.4.5.2.3.8
&The value for load average that is considered a critical level for that resource. Valid ranges: Greater than 0.000001, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad5MinMonitor 1.3.6.1.4.1.791.2.9.4.5.2.3.9
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusLoad5MinStatus 1.3.6.1.4.1.791.2.9.4.5.2.3.10
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusLoad15MinValue 1.3.6.1.4.1.791.2.9.4.5.2.3.11
&The current 15 minute average value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad15MinWarn 1.3.6.1.4.1.791.2.9.4.5.2.3.12
&The value for load average that is considered a warning level for that resource. Valid ranges: Greater than 0.000000, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad15MinCrit 1.3.6.1.4.1.791.2.9.4.5.2.3.13
&The value for load average that is considered a critical level for that resource. Valid ranges: Greater than 0.000001, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusLoad15MinMonitor 1.3.6.1.4.1.791.2.9.4.5.2.3.14
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusLoad15MinStatus 1.3.6.1.4.1.791.2.9.4.5.2.3.15
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusMemTotal 1.3.6.1.4.1.791.2.9.4.5.2.4.1
&The total memory configured on the machine in kilobytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusMemValue 1.3.6.1.4.1.791.2.9.4.5.2.4.2
&The memory used by the machine in kilobytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusMemLagValue 1.3.6.1.4.1.791.2.9.4.5.2.4.3
&The number of times that the threshold has been reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusMemLag 1.3.6.1.4.1.791.2.9.4.5.2.4.4
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusMemWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.4.5
&The absolute value used for threshold calculation based on the configured warning value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusMemCritValue 1.3.6.1.4.1.791.2.9.4.5.2.4.6
&The absolute value used for threshold calculation based on the configured critical value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusMemWarn 1.3.6.1.4.1.791.2.9.4.5.2.4.7
&The value for used memory, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total memory - 1, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusMemCrit 1.3.6.1.4.1.791.2.9.4.5.2.4.8
&The value for used memory, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total memory, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusMemMonitor 1.3.6.1.4.1.791.2.9.4.5.2.4.9
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusMemStatus 1.3.6.1.4.1.791.2.9.4.5.2.4.10
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusSwapTotalName 1.3.6.1.4.1.791.2.9.4.5.2.5.1
&The name the agent gives the total swap information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapTotalAvailable 1.3.6.1.4.1.791.2.9.4.5.2.5.2
&The total amount of swap configured on the machine in kilobytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapTotalUsedValue 1.3.6.1.4.1.791.2.9.4.5.2.5.3
&The total amount of swap space in use on the machine in kilobytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapTotalLagValue 1.3.6.1.4.1.791.2.9.4.5.2.5.4
&The number of times that the threshold has been reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapTotalLag 1.3.6.1.4.1.791.2.9.4.5.2.5.5
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapTotalWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.5.6
&The absolute value used for threshold calculation based on the configured warning value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapTotalCritValue 1.3.6.1.4.1.791.2.9.4.5.2.5.7
&The absolute value used for threshold calculation based on the configured critical value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapTotalWarn 1.3.6.1.4.1.791.2.9.4.5.2.5.8
&The value for total swap space, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total swap space - 1, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapTotalCrit 1.3.6.1.4.1.791.2.9.4.5.2.5.9
&The value for total swap space, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total swap space, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapTotalMonitor 1.3.6.1.4.1.791.2.9.4.5.2.5.10
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusSwapTotalStatus 1.3.6.1.4.1.791.2.9.4.5.2.5.11
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusSwapCount 1.3.6.1.4.1.791.2.9.4.5.2.5.12
&Number of swap partitions in the swap table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapTable 1.3.6.1.4.1.791.2.9.4.5.2.5.13
&The table detailing the individual swap devices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusSwapSequence

uxsStatusSwapEntry 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1
&
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UxsStatusSwapSequence  

uxsStatusSwapName 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.1
&The name of the swap device that this watcher monitors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapAggStatus 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.2
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold, down(5) - The resource is in a down state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4), down(5)  

uxsStatusSwapAvailable 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.3
&The amount of swap configured on the device in kilobytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapUsedValue 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.4
&The amount of swap space in use on the device in kilobytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapLagValue 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.5
&The number of times that the threshold has been reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapLag 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.6
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusSwapWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.7
&The absolute value used for threshold calculation based on the configured warning value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapCritValue 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.8
&The absolute value used for threshold calculation based on the configured critical value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapWarn 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.9
&The value for device swap space, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than device swap space - 1, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapCrit 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.10
&The value for device swap space, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than device swap space, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusSwapMonitor 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.11
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusSwapStatus 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.12
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusSwapLossAction 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.13
&Defines the action to take if the swap file is removed from the machine. Valid values: remove(1), up(2) or down(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsStatusSwapLossStatus 1.3.6.1.4.1.791.2.9.4.5.2.5.13.1.14
&The status relating to the existence of the object. Valid values: unknown(1), up(2) or down(3).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusFSysCount 1.3.6.1.4.1.791.2.9.4.5.2.6.1
&The number of monitored file systems.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusFSysTable 1.3.6.1.4.1.791.2.9.4.5.2.6.2
&The table of monitored file systems.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusFSysSequence

uxsStatusFSysEntry 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1
&
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UxsStatusFSysSequence  

uxsStatusFSysName 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.1
&The file system mount name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysRelatedTo 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.2
&The device from which the file system is mounted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysType 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.3
&The type of the mounted file system. The value is platform dependent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysStatus 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.4
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold, down(5) - The resource is in a down state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4), down(5)  

uxsStatusFSysSpaceTotal 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.5
&The amount of space available on the file system in kilobytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusFSysSpaceValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.6
&The amount of space used on the file system in kilobytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusFSysSpaceWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.7
&The absolute value used for threshold calculation based on the configured warning value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceCritValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.8
&The absolute value used for threshold calculation based on the configured critical value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceWarn 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.9
&The value for used file system space, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total space - 1, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceCrit 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.10
&The value for used file system space, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total space, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceMonitor 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.11
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusFSysSpaceStatus 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.12
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusFSysSpaceDValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.13
&The difference of used space, in kilobytes, since the last poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusFSysSpaceDWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.14
&The absolute value used for threshold calculation based on the configured warning value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceDCritValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.15
&The absolute value used for threshold calculation based on the configured critical value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceDWarn 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.16
&The value for used file system space delta, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total space - 1, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceDCrit 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.17
&The value for used file system space delta, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total memory, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysSpaceDMonitor 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.18
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusFSysSpaceDStatus 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.19
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusFSysInodesTotal 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.20
&The amount of inodes configured on the file system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusFSysInodesValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.21
&The amount of used inodes on the file system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusFSysInodesWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.22
&The absolute value used for threshold calculation based on the configured warning value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesCritValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.23
&The absolute value used for threshold calculation based on the configured critical value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesWarn 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.24
&The value for inodes, either as a percentage or absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total inodes - 1, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesCrit 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.25
&The value for inodes, either as a percentage or absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total space, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesMonitor 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.26
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusFSysInodesStatus 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.27
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusFSysInodesDValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.28
&The difference in the number of used inodes since the last poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusFSysInodesDWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.29
&The absolute value used for threshold calculation based on the configured warning value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesDCritValue 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.30
&The absolute value used for threshold calculation based on the configured critical value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesDWarn 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.31
&The value for inodes delta, either as a percentage or absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total inodes - 1, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesDCrit 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.32
&The value for inodes delta, either as a percentage or absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total space, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusFSysInodesDMonitor 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.33
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusFSysInodesDStatus 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.34
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusFSysMountedMonitor 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.35
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsStatusFSysMountedStatus 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.36
&The mounted status of the device: unknown(1) - An error occurred collecting the file system information. up(2) - The file system is mounted, down(3) The file system is not mounted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusFSysLossAction 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.37
&Defines the action to take if the file system is removed from the file system table. Valid values: remove(1), up(2) or down(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsStatusFSysLossStatus 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.38
&The status relating to the existence of the object. Valid values: unknown(1), up(2) or down(3).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusFSysRemove 1.3.6.1.4.1.791.2.9.4.5.2.6.2.1.39
&Removes the file system watcher from the agent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

uxsStatusDiskCount 1.3.6.1.4.1.791.2.9.4.5.2.7.1
&The number of physical disks monitored by the agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusDiskTable 1.3.6.1.4.1.791.2.9.4.5.2.7.2
&The table of monitored physical disks.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusDiskSequence

uxsStatusDiskEntry 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1
&
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UxsStatusDiskSequence  

uxsStatusDiskName 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.1
&The device name of the physical disk that is being monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusDiskAggStatus 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.2
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold, down(5) - The resource is in a down state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4), down(5)  

uxsStatusDiskTPutValue 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.3
&The kilobytes in blocks per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusDiskTPutWarn 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.4
&The value for physical disk kilobytes per second throughput that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusDiskTPutCrit 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.5
&The value for physical disk kilobytes per second throughput that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusDiskTPutMonitor 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.6
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusDiskTPutStatus 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.7
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusDiskLossAction 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.8
&Defines the action to take if the physical disk is removed from the machine. Valid values: remove(1), up(2) or down(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsStatusDiskLossStatus 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.9
&The status relating to the existence of the object. Valid values: unknown(1), up(2) or down(3).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusDiskRemove 1.3.6.1.4.1.791.2.9.4.5.2.7.2.1.10
&Removes the physical disk watcher from the agent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

uxsStatusFileCount 1.3.6.1.4.1.791.2.9.4.5.2.8.1
&The number of file watchers configured for the agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusFileTable 1.3.6.1.4.1.791.2.9.4.5.2.8.2
&The table of file watchers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusFileSequence

uxsStatusFileEntry 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1
&
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UxsStatusFileSequence  

uxsStatusFileName 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.1
&The name of the file being monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusFileDesc 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.2
&The description of the watcher provided when the watcher was created.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusFileStatus 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.3
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold, down(5) - The resource is in a down state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4), down(5)  

uxsStatusFileExist 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.4
&The test to perform for file existence. Valid values: should-exist(1) or should-not-exist(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

uxsStatusFileExistMonitor 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.5
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsStatusFileExistStatus 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.6
&The status of the files existence based on the uxsStatusFileExist attribute.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusFileModTime 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.7
&The files last modified date and time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusFileModTimeValue 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.8
&The time the agent compares with for the file timestamp status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusFileModTimeMonitor 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.9
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsStatusFileModTimeStatus 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.10
&The status of the timestamp monitoring. unknown(1) - An error occurred collecting the data, up(2) - The timestamp is unchanged, down(3) - The timestamp has changed, reset(4) - Reset the uxsStatusFileModTimeValue to the files current timestamp and sets the status to OK.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3), reset(4)  

uxsStatusFileSizeValue 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.11
&The size of the file in kilobytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusFileSizeWarn 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.12
&The value for file size that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusFileSizeCrit 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.13
&The value for file size that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusFileSizeMonitor 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.14
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusFileSizeStatus 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.15
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusFileSizeDValue 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.16
&The difference in file size since the last poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusFileSizeDWarn 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.17
&The value for file size change that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusFileSizeDCrit 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.18
&The value for file size change that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusFileSizeDMonitor 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.19
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusFileSizeDStatus 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.20
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusFileRemove 1.3.6.1.4.1.791.2.9.4.5.2.8.2.1.21
&Removes the file watcher from the agent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

uxsStatusProcCount 1.3.6.1.4.1.791.2.9.4.5.2.9.1
&The count of the number of process watchers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusProcTable 1.3.6.1.4.1.791.2.9.4.5.2.9.2
&The table of process watchers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusProcSequence

uxsStatusProcEntry 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1
&
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UxsStatusProcSequence  

uxsStatusProcName 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.1
&The name of the process to monitor. Valid values are a string with an optional * at the end of the string for wild card matching.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusProcPath 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.2
&The path of the process to match. Valid values are a string with an optional * at the end of the string for wild card matching.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusProcArgs 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.3
&A section of the processes arguments to match.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusProcUsers 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.4
&List of users to match. Details format of the string are documented in the online help.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusProcStatus 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.5
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold, down(5) - The resource is in a down state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4), down(5)  

uxsStatusProcPIDs 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.6
&The list of process IDs that caused the watcher to be in a bad state. This string is limited to 256 characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusProcInstValue 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.7
&The current number of instances that match the key fields.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusProcInstMin 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.8
&Minimum number of instances expected to match the key. Valid values: -1, 0 or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusProcInstMax 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.9
&Maximum number of instances expected to match the key. Valid values: -1, 0 or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusProcInstMonitor 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.10
&Defines the level of monitoring for process instances. Valid values: do-not-monitor(1) or monitor(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsStatusProcInstStatus 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.11
&The current status of the resource: unknown(1) - An error occurred collecting the data, up(2) - The resource is within the monitoring parameters, down(3) - The resource is outside the monitoring parameters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusProcChldValue 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.12
&The number of children of the process. See the documentation for additional information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusProcChldMin 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.13
&Minimum number of children (based on lowest for all instances). Valid values: -1, 0 or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusProcChldMax 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.14
&Maximum number of children (based on highest for all instances). Valid values: -1, 0 or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusProcChldMonitor 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.15
&Defines the level of monitoring for the number of children of the process. Valid values: do-not-monitor(1) or monitor(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsStatusProcChldStatus 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.16
&The status of the number of children of the process: unknown(1) - An error occurred collecting the data, up(2) - The resource is within the monitoring parameters, down(3) - The resource is outside the monitoring parameters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusProcSizeValue 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.17
&The size of the process in kilobytes. See the documentation for rules for which match's value is displayed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusProcSizeMin 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.18
&Minimum size of the process in kilobytes (based on lowest for all instances). Valid values: -1, 0 or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusProcSizeMax 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.19
&Maximum size of the process in kilobytes (based on highest for all instances). Valid values: -1, 0 or greater.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusProcSizeMonitor 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.20
&Defines the level of monitoring for the size of the process. Valid values: do-not-monitor(1) or monitor(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsStatusProcSizeStatus 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.21
&The status of the process size. unknown(1) - An error occurred collecting the data, up(2) - The resource is within the monitoring parameters, down(3) - The resource is outside the monitoring parameters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusProcCPUValue 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.22
&The highest of all CPU (user and system time) usage since the last poll as a percentage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusProcCPUWarn 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.23
&The percentage of used CPU that is considered a warning level for that resource. Valid ranges: Greater than 0, less than 100, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusProcCPUCrit 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.24
&The percentage of used CPU that is considered a critical level for that resource. Valid ranges: Greater than 1, less than or equal to 100, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusProcCPUMonitor 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.25
&Defines the level of monitoring for used CPU. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusProcCPUStatus 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.26
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusProcRemove 1.3.6.1.4.1.791.2.9.4.5.2.9.2.1.27
&Removes the process watcher from the agent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

uxsStatusPrnCount 1.3.6.1.4.1.791.2.9.4.5.2.10.1
&The number of configured printer queue watchers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusPrnTable 1.3.6.1.4.1.791.2.9.4.5.2.10.2
&The table of printer queue watchers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusPrnSequence

uxsStatusPrnEntry 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1
&
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UxsStatusPrnSequence  

uxsStatusPrnName 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.1
&The name of the printer queue being monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusPrnAggStatus 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.2
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold, down(5) - The resource is in a down state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4), down(5)  

uxsStatusPrnDesc 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.3
&The description given to the printer queue watcher when it was added.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusPrnItemsValue 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.4
&The number of printer queue items on the queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusPrnItemsWarn 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.5
&The number of printer queue items that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusPrnItemsCrit 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.6
&The number of printer queue items that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusPrnItemsMonitor 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.7
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusPrnItemsStatus 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.8
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusPrnLossAction 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.9
&Defines the action to take if the printer queue configuration is removed from the machine. Valid values: remove(1), up(2) or down(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsStatusPrnLossStatus 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.10
&The status relating to the existence of the object. Valid values: unknown(1), up(2) or down(3).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusPrnRemove 1.3.6.1.4.1.791.2.9.4.5.2.10.2.1.11
&Removes the printer watcher from the agent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

uxsStatusNetTotalStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.1
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetTotalIPktValue 1.3.6.1.4.1.791.2.9.4.5.2.11.2
&The total number of input packets per second for all interfaces since the last poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalIPktWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.3
&The number of total input packets that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalIPktCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.4
&The number of total input packets that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalIPktMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.5
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetTotalIPktStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.6
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetTotalIErrValue 1.3.6.1.4.1.791.2.9.4.5.2.11.7
&The total number of input errors per second for all interfaces since the last poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalIErrWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.8
&The number of total input errors that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalIErrCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.9
&The number of total input errors that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalIErrMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.10
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetTotalIErrStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.11
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetTotalOPktValue 1.3.6.1.4.1.791.2.9.4.5.2.11.12
&The total number of output packets per second for all interfaces since the last poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalOPktWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.13
&The number of total output packets that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalOPktCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.14
&The number of total output packets that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalOPktMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.15
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetTotalOPktStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.16
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetTotalOErrValue 1.3.6.1.4.1.791.2.9.4.5.2.11.17
&The total number of output errors per second for all interfaces since the last poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalOErrWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.18
&The number of total output errors that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalOErrCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.19
&The number of total output errors that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalOErrMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.20
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetTotalOErrStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.21
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetTotalCollValue 1.3.6.1.4.1.791.2.9.4.5.2.11.22
&The total number of collisions per second for all interfaces since the last poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalCollWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.23
&The number of total collisions that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalCollCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.24
&The number of total collisions that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTotalCollMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.25
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetTotalCollStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.26
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetCount 1.3.6.1.4.1.791.2.9.4.5.2.11.27
&The number of network interfaces in the network table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusNetTable 1.3.6.1.4.1.791.2.9.4.5.2.11.28
&The network table containing the network interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusNetSequence

uxsStatusNetEntry 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1
&
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UxsStatusNetSequence  

uxsStatusNetName 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.1
&The name by which the network interface is known.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusNetIP 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.2
&The IP address of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusNetStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.3
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetIPktValue 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.4
&The number of input packets per second for the interface since the last poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusNetIPktWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.5
&The number of input packets that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetIPktCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.6
&The number of input packets that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetIPktMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.7
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetIPktStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.8
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetIErrValue 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.9
&The number of input errors per second for the interface since the last poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusNetIErrWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.10
&The number of input errors that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetIErrCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.11
&The number of input errors that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetIErrMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.12
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetIErrStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.13
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetOPktValue 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.14
&The number of output packets per second for the interface since the last poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusNetOPktWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.15
&The number of output packets that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetOPktCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.16
&The number of output packets that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetOPktMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.17
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetOPktStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.18
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetOErrValue 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.19
&The number of output errors per second for the interface since the last poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusNetOErrWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.20
&The number of output errors that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetOErrCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.21
&The number of output errors that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetOErrMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.22
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetOErrStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.23
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetCollValue 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.24
&The number of collisions per second for the interface since the last poll.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusNetCollWarn 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.25
&The number of collisions that is considered a warning level for that resource. Valid ranges: Greater than 0, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetCollCrit 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.26
&The number of collisions that is considered a critical level for that resource. Valid ranges: Greater than 1, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusNetCollMonitor 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.27
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusNetCollStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.28
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusNetLossAction 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.29
&Defines the action to take if the network interface is removed from the machine. Valid values: remove(1), up(2) or down(3).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down(3)  

uxsStatusNetLossStatus 1.3.6.1.4.1.791.2.9.4.5.2.11.28.1.30
&The status relating to the existence of the object. Valid values: unknown(1), up(2) or down(3).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

uxsStatusIPCSHMIDSAvailable 1.3.6.1.4.1.791.2.9.4.5.2.12.1
&The number of configured shared memory IDs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSHMIDSValue 1.3.6.1.4.1.791.2.9.4.5.2.12.2
&The number of shared memory IDs in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSHMIDSLagValue 1.3.6.1.4.1.791.2.9.4.5.2.12.3
&The number of times that the threshold has been reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSHMIDSLag 1.3.6.1.4.1.791.2.9.4.5.2.12.4
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSHMIDSWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.12.5
&The absolute value used for threshold calculation based on the configured warning value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSHMIDSCritValue 1.3.6.1.4.1.791.2.9.4.5.2.12.6
&The absolute value used for threshold calculation based on the configured critical value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSHMIDSWarn 1.3.6.1.4.1.791.2.9.4.5.2.12.7
&The value for used IDs, either as a percentage or absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total IDs - 1, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSHMIDSCrit 1.3.6.1.4.1.791.2.9.4.5.2.12.8
&The value for used IDs, either as a percentage or absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total IDs, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSHMIDSMonitor 1.3.6.1.4.1.791.2.9.4.5.2.12.9
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusIPCSHMIDSStatus 1.3.6.1.4.1.791.2.9.4.5.2.12.10
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusIPCSEMIDSAvailable 1.3.6.1.4.1.791.2.9.4.5.2.12.11
&The number of configured semaphore IDs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSEMIDSValue 1.3.6.1.4.1.791.2.9.4.5.2.12.12
&The number of semaphore IDs in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSEMIDSLagValue 1.3.6.1.4.1.791.2.9.4.5.2.12.13
&The number of times that the threshold has been reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSEMIDSLag 1.3.6.1.4.1.791.2.9.4.5.2.12.14
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCSEMIDSWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.12.15
&The absolute value used for threshold calculation based on the configured warning value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSEMIDSCritValue 1.3.6.1.4.1.791.2.9.4.5.2.12.16
&The absolute value used for threshold calculation based on the configured critical value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSEMIDSWarn 1.3.6.1.4.1.791.2.9.4.5.2.12.17
&The value for used IDs, either as a percentage or absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total IDs - 1, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSEMIDSCrit 1.3.6.1.4.1.791.2.9.4.5.2.12.18
&The value for used IDs, either as a percentage or absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total IDs, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCSEMIDSMonitor 1.3.6.1.4.1.791.2.9.4.5.2.12.19
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusIPCSEMIDSStatus 1.3.6.1.4.1.791.2.9.4.5.2.12.20
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusIPCMQIDSAvailable 1.3.6.1.4.1.791.2.9.4.5.2.12.21
&The number of configured message queue IDs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQIDSValue 1.3.6.1.4.1.791.2.9.4.5.2.12.22
&The number of message queue IDs in use.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQIDSLagValue 1.3.6.1.4.1.791.2.9.4.5.2.12.23
&The number of times that the threshold has been reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQIDSLag 1.3.6.1.4.1.791.2.9.4.5.2.12.24
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQIDSWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.12.25
&The absolute value used for threshold calculation based on the configured warning value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQIDSCritValue 1.3.6.1.4.1.791.2.9.4.5.2.12.26
&The absolute value used for threshold calculation based on the configured critical value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQIDSWarn 1.3.6.1.4.1.791.2.9.4.5.2.12.27
&The value for used IDs, either as a percentage or absolute value, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total IDs - 1, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQIDSCrit 1.3.6.1.4.1.791.2.9.4.5.2.12.28
&The value for used IDs, either as a percentage or absolute value, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total IDs, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQIDSMonitor 1.3.6.1.4.1.791.2.9.4.5.2.12.29
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusIPCMQIDSStatus 1.3.6.1.4.1.791.2.9.4.5.2.12.30
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsStatusIPCMQMonitor 1.3.6.1.4.1.791.2.9.4.5.2.12.31
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsStatusIPCMQCount 1.3.6.1.4.1.791.2.9.4.5.2.12.32
&The number of monitored message queues.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQTable 1.3.6.1.4.1.791.2.9.4.5.2.12.33
&The table of monitored message queues.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UxsStatusIPCMQSequence

uxsStatusIPCMQEntry 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1
&
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UxsStatusIPCMQSequence  

uxsStatusIPCMQID 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.1
&The message queue ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQKey 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.2
&The message queue key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQMode 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.3
&The message queue access rights.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQOwner 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.4
&The message queue owner.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQGroup 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.5
&The message queue group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQBytesAvailable 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.6
&The number of bytes available for messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQBytesValue 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.7
&The bytes used in the message queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQBytesLagValue 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.8
&The number of times that the threshold has been reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQBytesLag 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.9
&The number of times that the threshold has to be reached before the state changes. Valid range: Greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

uxsStatusIPCMQBytesWarnValue 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.10
&The absolute value used for threshold calculation based on the configured warning value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQBytesCritValue 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.12
&The absolute value used for threshold calculation based on the configured critical value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQBytesWarn 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.13
&The value for used message queue bytes, either as a percentage or in kilobytes, that is considered a warning level for that resource. Valid ranges: Greater than 0, less than total queue size - 1, not greater than or equal to the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQBytesCrit 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.14
&The value for used message queue bytes, either as a percentage or in kilobytes, that is considered a critical level for that resource. Valid ranges: Greater than 1, less than total Queue size, not less than or equal to the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

uxsStatusIPCMQBytesMonitor 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.15
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1), warning-only(2), critical-only(3) or both(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

uxsStatusIPCMQBytesStatus 1.3.6.1.4.1.791.2.9.4.5.2.12.33.1.16
&The current status of the resource: unknown(1) - An error occurred during data collection, ok(2) - The resource is within the defined limits, warning(3) - The resource has breached the warning threshold, critical(4) - The resource has breached the critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

uxsAvailFSysEntry 1.3.6.1.4.1.791.2.9.4.5.3.2.1
&
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UxsAvailFSysSequence  

uxsAvailFSysName 1.3.6.1.4.1.791.2.9.4.5.3.2.1.1
&The file system name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsAvailFSysRelatedTo 1.3.6.1.4.1.791.2.9.4.5.3.2.1.2
&The device to which the file system is related.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsAvailFSysType 1.3.6.1.4.1.791.2.9.4.5.3.2.1.3
&The type of the file system. Values are platform dependent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsAvailDiskEntry 1.3.6.1.4.1.791.2.9.4.5.3.4.1
&
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UxsAvailDiskSequence  

uxsAvailDiskName 1.3.6.1.4.1.791.2.9.4.5.3.4.1.1
&The device name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsAvailPrnEntry 1.3.6.1.4.1.791.2.9.4.5.3.6.1
&
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UxsAvailPrnSequence  

uxsAvailPrnName 1.3.6.1.4.1.791.2.9.4.5.3.6.1.1
&The local printer queue name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsPollNetTable 1.3.6.1.4.1.791.2.9.4.5.4.1.1
&The table of raw network statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UxsPollNetSequence

uxsPollNetEntry 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1
&
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UxsPollNetSequence  

uxsPollNetName 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1.1
&The name by which the network interface is known.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsPollNetIP 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1.2
&The IP address of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsPollNetIPktValue 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1.3
&The number of input packets since the machine started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsPollNetIErrValue 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1.4
&The number of input errors since the machine started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsPollNetOPktValue 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1.5
&The number of output packets since the machine started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsPollNetOErrValue 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1.6
&The number of output errors since the machine started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsPollNetCollValue 1.3.6.1.4.1.791.2.9.4.5.4.1.1.1.7
&The number of collisions since the machine started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsPollIPCSHMMonitor 1.3.6.1.4.1.791.2.9.4.5.4.2.1
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsPollIPCSHMCount 1.3.6.1.4.1.791.2.9.4.5.4.2.2
&The number of shared memory segments in the table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsPollIPCSHMTable 1.3.6.1.4.1.791.2.9.4.5.4.2.3
&The table of shared memory segments.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UxsPollIPCSHMSequence

uxsPollIPCSEMMonitor 1.3.6.1.4.1.791.2.9.4.5.4.2.4
&Defines the level of monitoring for the resource's status. Valid values: do-not-monitor(1) or monitor(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), monitor(2)  

uxsPollIPCSEMCount 1.3.6.1.4.1.791.2.9.4.5.4.2.5
&The number of semaphores in the table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsPollIPCSEMTable 1.3.6.1.4.1.791.2.9.4.5.4.2.6
&The table of semaphore information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UxsPollIPCSEMSequence

uxsPollIPCSHMEntry 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1
&
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UxsPollIPCSHMSequence  

uxsPollIPCSHMID 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1.1
&The shared memory ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSHMKey 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1.2
&The shared memory key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSHMMode 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1.3
&The shared memory access rights.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSHMOwner 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1.4
&The shared memory segment owner.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSHMGroup 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1.5
&The shared memory segments group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSHMMaxSize 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1.6
&The shared memory segment size.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsPollIPCSHMAttached 1.3.6.1.4.1.791.2.9.4.5.4.2.3.1.7
&The number of processes using the shared memory segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsPollIPCSEMEntry 1.3.6.1.4.1.791.2.9.4.5.4.2.6.1
&
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UxsPollIPCSEMSequence  

uxsPollIPCSEMID 1.3.6.1.4.1.791.2.9.4.5.4.2.6.1.1
&The semaphore ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSEMKey 1.3.6.1.4.1.791.2.9.4.5.4.2.6.1.2
&The semaphore key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSEMMode 1.3.6.1.4.1.791.2.9.4.5.4.2.6.1.3
&The semaphore access rights.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSEMOwner 1.3.6.1.4.1.791.2.9.4.5.4.2.6.1.4
&The semaphore owner.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSEMGroup 1.3.6.1.4.1.791.2.9.4.5.4.2.6.1.5
&The semaphore group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

uxsPollIPCSEMMaxNums 1.3.6.1.4.1.791.2.9.4.5.4.2.6.1.6
&The number of semaphores.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

uxsCPUTotalUnknown 10000
&
TRAP-TYPE    

uxsCPUTotalOK 10001
&
TRAP-TYPE    

uxsCPUTotalWarning 10002
&
TRAP-TYPE    

uxsCPUTotalCritical 10003
&
TRAP-TYPE    

uxsCPUUnknown 10990
&
TRAP-TYPE    

uxsCPUOK 10991
&
TRAP-TYPE    

uxsCPUWarning 10992
&
TRAP-TYPE    

uxsCPUCritical 10993
&
TRAP-TYPE    

uxsCPUDown 10995
&
TRAP-TYPE    

uxsCPUAdded 10996
&
TRAP-TYPE    

uxsCPUDeleted 10997
&
TRAP-TYPE    

uxsLoad1Unknown 11010
&
TRAP-TYPE    

uxsLoad1OK 11011
&
TRAP-TYPE    

uxsLoad1Warning 11012
&
TRAP-TYPE    

uxsLoad1Critical 11013
&
TRAP-TYPE    

uxsLoad5Unknown 11050
&
TRAP-TYPE    

uxsLoad5OK 11051
&
TRAP-TYPE    

uxsLoad5Warning 11052
&
TRAP-TYPE    

uxsLoad5Critical 11053
&
TRAP-TYPE    

uxsLoad15Unknown 11150
&
TRAP-TYPE    

uxsLoad15OK 11151
&
TRAP-TYPE    

uxsLoad15Warning 11152
&
TRAP-TYPE    

uxsLoad15Critical 11153
&
TRAP-TYPE    

uxsMemUnknown 12010
&
TRAP-TYPE    

uxsMemOK 12011
&
TRAP-TYPE    

uxsMemWarning 12012
&
TRAP-TYPE    

uxsMemCritical 12013
&
TRAP-TYPE    

uxsSwapTotalUnknown 13000
&
TRAP-TYPE    

uxsSwapTotalOK 13001
&
TRAP-TYPE    

uxsSwapTotalWarning 13002
&
TRAP-TYPE    

uxsSwapTotalCritical 13003
&
TRAP-TYPE    

uxsSwapUnknown 13990
&
TRAP-TYPE    

uxsSwapOK 13991
&
TRAP-TYPE    

uxsSwapWarning 13992
&
TRAP-TYPE    

uxsSwapCritical 13993
&
TRAP-TYPE    

uxsSwapDown 13995
&
TRAP-TYPE    

uxsSwapAdded 13996
&
TRAP-TYPE    

uxsSwapDeleted 13997
&
TRAP-TYPE    

uxsFSysUnknown 14980
&
TRAP-TYPE    

uxsFSysOK 14981
&
TRAP-TYPE    

uxsFSysWarning 14982
&
TRAP-TYPE    

uxsFSysCritical 14983
&
TRAP-TYPE    

uxsFSysDown 14985
&
TRAP-TYPE    

uxsFSysAdded 14986
&
TRAP-TYPE    

uxsFSysDeleted 14987
&
TRAP-TYPE    

uxsDiskUnknown 15980
&
TRAP-TYPE    

uxsDiskOK 15981
&
TRAP-TYPE    

uxsDiskWarning 15982
&
TRAP-TYPE    

uxsDiskCritical 15983
&
TRAP-TYPE    

uxsDiskDown 15985
&
TRAP-TYPE    

uxsDiskAdded 15986
&
TRAP-TYPE    

uxsDiskDeleted 15987
&
TRAP-TYPE    

uxsProcUnknown 16980
&
TRAP-TYPE    

uxsProcOK 16981
&
TRAP-TYPE    

uxsProcWarning 16982
&
TRAP-TYPE    

uxsProcCritical 16983
&
TRAP-TYPE    

uxsProcDown 16985
&
TRAP-TYPE    

uxsProcAdded 16986
&
TRAP-TYPE    

uxsProcDeleted 16987
&
TRAP-TYPE    

uxsFilesUnknown 17980
&
TRAP-TYPE    

uxsFilesOK 17981
&
TRAP-TYPE    

uxsFilesWarning 17982
&
TRAP-TYPE    

uxsFilesCritical 17983
&
TRAP-TYPE    

uxsFilesDown 17985
&
TRAP-TYPE    

uxsFilesAdded 17986
&
TRAP-TYPE    

uxsFilesDeleted 17987
&
TRAP-TYPE    

uxsPrnUnknown 18980
&
TRAP-TYPE    

uxsPrnOK 18981
&
TRAP-TYPE    

uxsPrnWarning 18982
&
TRAP-TYPE    

uxsPrnCritical 18983
&
TRAP-TYPE    

uxsPrnDown 18985
&
TRAP-TYPE    

uxsPrnAdded 18986
&
TRAP-TYPE    

uxsPrnDeleted 18987
&
TRAP-TYPE    

uxsNetTotalUnknown 19000
&
TRAP-TYPE    

uxsNetTotalOK 19001
&
TRAP-TYPE    

uxsNetTotalWarning 19002
&
TRAP-TYPE    

uxsNetTotalCritical 19003
&
TRAP-TYPE    

uxsNetUnknown 19990
&
TRAP-TYPE    

uxsNetOK 19991
&
TRAP-TYPE    

uxsNetWarning 19992
&
TRAP-TYPE    

uxsNetCritical 19993
&
TRAP-TYPE    

uxsNetDown 19995
&
TRAP-TYPE    

uxsNetAdded 19996
&
TRAP-TYPE    

uxsNetDeleted 19997
&
TRAP-TYPE    

uxsIPCSHMUnknown 20010
&
TRAP-TYPE    

uxsIPCSHMOK 20011
&
TRAP-TYPE    

uxsIPCSHMWarning 20012
&
TRAP-TYPE    

uxsIPCSHMCritical 20013
&
TRAP-TYPE    

uxsIPCSEMUnknown 20020
&
TRAP-TYPE    

uxsIPCSEMOK 20021
&
TRAP-TYPE    

uxsIPCSEMWarning 20022
&
TRAP-TYPE    

uxsIPCSEMCritical 20023
&
TRAP-TYPE    

uxsIPCMQUnknown 20030
&
TRAP-TYPE    

uxsIPCMQOK 20031
&
TRAP-TYPE    

uxsIPCMQWarning 20032
&
TRAP-TYPE    

uxsIPCMQCritical 20033
&
TRAP-TYPE    

uxsIPCMQSUnknown 20980
&
TRAP-TYPE    

uxsIPCMQSOK 20981
&
TRAP-TYPE    

uxsIPCMQSWarning 20982
&
TRAP-TYPE    

uxsIPCMQSCritical 20983
&
TRAP-TYPE    

uxsIPCMQSDown 20985
&
TRAP-TYPE    

uxsIPCMQSAdded 20986
&
TRAP-TYPE    

uxsIPCMQSDeleted 20987
&
TRAP-TYPE