CHIPMODULE-MIB

File: CHIPMODULE-MIB.mib (185623 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

enterprises NetworkAddress IpAddress
Counter Gauge TimeTicks
DisplayString OBJECT-TYPE

Defined Types

Ol50nnMCTLModEntry  
SEQUENCE    
  ol50nnMCTLModSlotIndex INTEGER
  ol50nnMCTLModTempStatus INTEGER

Ol51nnMMGTModEntry  
SEQUENCE    
  ol51nnMMGTModSlotIndex INTEGER
  ol51nnMMGTModMasterPriority INTEGER
  ol51nnMMGTModMasterStatus INTEGER
  ol51nnMMGTModStationAddr OCTET STRING

Ol51nnMMGTPortEntry  
SEQUENCE    
  ol51nnMMGTPortSlotIndex INTEGER
  ol51nnMMGTPortIndex INTEGER
  ol51nnMMGTIpAddress IpAddress

Ol51nnMFIBModEntry  
SEQUENCE    
  ol51nnMFIBModSlotIndex INTEGER
  ol51nnMFIBModDipNetwork INTEGER
  ol51nnMFIBModLLW INTEGER
  ol51nnMFIBModDipLLW INTEGER

Ol51nnMFIBPortEntry  
SEQUENCE    
  ol51nnMFIBPortSlotIndex INTEGER
  ol51nnMFIBPortIndex INTEGER
  ol51nnMFIBPortAdminState INTEGER
  ol51nnMFIBPortBuddySlot INTEGER
  ol51nnMFIBPortBuddyPort INTEGER
  ol51nnMFIBPortDipAdminState INTEGER

Ol51nnMUTPModEntry  
SEQUENCE    
  ol51nnMUTPModSlotIndex INTEGER
  ol51nnMUTPModDipNetwork INTEGER
  ol51nnMUTPModCrossover INTEGER
  ol51nnMUTPModDipCrossover INTEGER
  ol51nnMUTPModFFL INTEGER
  ol51nnMUTPModDipFFL INTEGER

Ol51nnMUTPPortEntry  
SEQUENCE    
  ol51nnMUTPPortSlotIndex INTEGER
  ol51nnMUTPPortIndex INTEGER
  ol51nnMUTPPortAdminState INTEGER
  ol51nnMUTPPortBuddySlot INTEGER
  ol51nnMUTPPortBuddyPort INTEGER
  ol51nnMUTPPortDipAdminState INTEGER
  ol51nnMUTPPortLinkInteg INTEGER
  ol51nnMUTPPortDipLinkInteg INTEGER
  ol51nnMUTPPortSquelch INTEGER
  ol51nnMUTPPortDipSquelch INTEGER

Ol51nnMTPModEntry  
SEQUENCE    
  ol51nnMTPModSlotIndex INTEGER
  ol51nnMTPModDipNetwork INTEGER
  ol51nnMTPModCrossover INTEGER
  ol51nnMTPModDipCrossover INTEGER

Ol51nnMTPPortEntry  
SEQUENCE    
  ol51nnMTPPortSlotIndex INTEGER
  ol51nnMTPPortIndex INTEGER
  ol51nnMTPPortAdminState INTEGER
  ol51nnMTPPortBuddySlot INTEGER
  ol51nnMTPPortBuddyPort INTEGER
  ol51nnMTPPortDipAdminState INTEGER
  ol51nnMTPPortLinkInteg INTEGER
  ol51nnMTPPortDipLinkInteg INTEGER
  ol51nnMTPPortSquelch INTEGER
  ol51nnMTPPortDipSquelch INTEGER

Ol51nnMBNCModEntry  
SEQUENCE    
  ol51nnMBNCModSlotIndex INTEGER
  ol51nnMBNCModDipNetwork INTEGER

Ol51nnMBNCPortEntry  
SEQUENCE    
  ol51nnMBNCPortSlotIndex INTEGER
  ol51nnMBNCPortIndex INTEGER
  ol51nnMBNCPortDipAdminState INTEGER
  ol51nnMBNCPortDipTermination INTEGER
  ol51nnMBNCPortDipGround INTEGER

Ol51nnBEEModEntry  
SEQUENCE    
  ol51nnBEEModSlotIndex INTEGER
  ol51nnBEEModStationAddr OCTET STRING
  ol51nnBEEModProtocols DisplayString

Ol51nnBEEPortEntry  
SEQUENCE    
  ol51nnBEEPortSlotIndex INTEGER
  ol51nnBEEPortIndex INTEGER
  ol51nnBEEPortIpAddress IpAddress
  ol51nnBEEPortDipNetwork INTEGER
  ol51nnBEEPortDefNetwork INTEGER

Ol51nnRESModEntry  
SEQUENCE    
  ol51nnRESModSlotIndex INTEGER
  ol51nnRESModStationAddr OCTET STRING
  ol51nnRESModProtocols DisplayString

Ol51nnRESPortEntry  
SEQUENCE    
  ol51nnRESPortSlotIndex INTEGER
  ol51nnRESPortIndex INTEGER
  ol51nnRESPortIpAddress IpAddress
  ol51nnRESPortDipNetwork INTEGER
  ol51nnRESPortDefNetwork INTEGER

Ol51nnREEModEntry  
SEQUENCE    
  ol51nnREEModSlotIndex INTEGER
  ol51nnREEModStationAddr OCTET STRING
  ol51nnREEModProtocols DisplayString

Ol51nnREEPortEntry  
SEQUENCE    
  ol51nnREEPortSlotIndex INTEGER
  ol51nnREEPortIndex INTEGER
  ol51nnREEPortIpAddress IpAddress
  ol51nnREEPortDipNetwork INTEGER
  ol51nnREEPortDefNetwork INTEGER

Ol51nnMAUIFModEntry  
SEQUENCE    
  ol51nnMAUIFModSlotIndex INTEGER

Ol51nnMAUIFPortEntry  
SEQUENCE    
  ol51nnMAUIFPortSlotIndex INTEGER
  ol51nnMAUIFPortIndex INTEGER
  ol51nnMAUIFPortAdminState INTEGER
  ol51nnMAUIFPortBuddySlot INTEGER
  ol51nnMAUIFPortBuddyPort INTEGER
  ol51nnMAUIFPortDipAdminState INTEGER
  ol51nnMAUIFPortDipNetwork INTEGER

Ol51nnMAUIMModEntry  
SEQUENCE    
  ol51nnMAUIMModSlotIndex INTEGER

Ol51nnMAUIMPortEntry  
SEQUENCE    
  ol51nnMAUIMPortSlotIndex INTEGER
  ol51nnMAUIMPortIndex INTEGER
  ol51nnMAUIMPortAdminState INTEGER
  ol51nnMAUIMPortBuddySlot INTEGER
  ol51nnMAUIMPortBuddyPort INTEGER
  ol51nnMAUIMPortDipAdminState INTEGER
  ol51nnMAUIMPortDipNetwork INTEGER
  ol51nnMAUIMPortSQETest INTEGER
  ol51nnMAUIMPortDipSQETest INTEGER
  ol51nnMAUIMPortCollision INTEGER
  ol51nnMAUIMPortDipCollision INTEGER
  ol51nnMAUIMPortHalfStep INTEGER
  ol51nnMAUIMPortDipHalfStep INTEGER

Ol5208MTPModEntry  
SEQUENCE    
  ol5208MTPModSlotIndex INTEGER
  ol5208MTPModBypsAdminState INTEGER
  ol5208MTPModBypsOperState INTEGER
  ol5208MTPModDipCableImp INTEGER

Ol5208MTPPortEntry  
SEQUENCE    
  ol5208MTPPortSlotIndex INTEGER
  ol5208MTPPortIndex INTEGER
  ol5208MTPPortDipAdminState INTEGER
  ol5208MTPPortStationType INTEGER

Ol5208MTPTrunkEntry  
SEQUENCE    
  ol5208MTPTrunkSlotIndex INTEGER
  ol5208MTPTrunkIndex INTEGER
  ol5208MTPTrunkDipAdminState INTEGER
  ol5208MTPTrunkCableMon INTEGER
  ol5208MTPTrunkDipCableMon INTEGER
  ol5208MTPTrunkNetMapState INTEGER
  ol5208MTPTrunkExtBcnRecovery INTEGER

Ol51nnMFPModEntry  
SEQUENCE    
  ol51nnMFPModSlotIndex INTEGER

Ol51nnMFPPortEntry  
SEQUENCE    
  ol51nnMFPPortSlotIndex INTEGER
  ol51nnMFPPortIndex INTEGER
  ol51nnMFPPortAdminState INTEGER
  ol51nnMFPPortBuddySlot INTEGER
  ol51nnMFPPortBuddyPort INTEGER
  ol51nnMFPPortDipAdminState INTEGER
  ol51nnMFPPortDipNetwork INTEGER
  ol51nnMFPPortLLW INTEGER
  ol51nnMFPPortDipLLW INTEGER
  ol51nnMFPPortHipwr INTEGER
  ol51nnMFPPortDipHipwr INTEGER

Ol51nnMFBPModEntry  
SEQUENCE    
  ol51nnMFBPModSlotIndex INTEGER

Ol51nnMFBPPortEntry  
SEQUENCE    
  ol51nnMFBPPortSlotIndex INTEGER
  ol51nnMFBPPortIndex INTEGER
  ol51nnMFBPPortAdminState INTEGER
  ol51nnMFBPPortBuddySlot INTEGER
  ol51nnMFBPPortBuddyPort INTEGER
  ol51nnMFBPPortDipAdminState INTEGER
  ol51nnMFBPPortDipNetwork INTEGER
  ol51nnMFBPPortLLW INTEGER
  ol51nnMFBPPortDipLLW INTEGER
  ol51nnMFBPPortHipwr INTEGER
  ol51nnMFBPPortDipHipwr INTEGER

Ol51nnMTPLModEntry  
SEQUENCE    
  ol51nnMTPLModSlotIndex INTEGER
  ol51nnMTPLModDipNetwork INTEGER

Ol51nnMTPLPortEntry  
SEQUENCE    
  ol51nnMTPLPortSlotIndex INTEGER
  ol51nnMTPLPortIndex INTEGER
  ol51nnMTPLPortAdminState INTEGER
  ol51nnMTPLPortBuddySlot INTEGER
  ol51nnMTPLPortBuddyPort INTEGER
  ol51nnMTPLPortDipAdminState INTEGER
  ol51nnMTPLPortLinkInteg INTEGER
  ol51nnMTPLPortDipLinkInteg INTEGER
  ol51nnMTPLPortSquelch INTEGER
  ol51nnMTPLPortJabber INTEGER
  ol51nnMTPLPortDipJabber INTEGER

Ol51nnMTPPLModEntry  
SEQUENCE    
  ol51nnMTPPLModSlotIndex INTEGER

Ol51nnMTPPLPortEntry  
SEQUENCE    
  ol51nnMTPPLPortSlotIndex INTEGER
  ol51nnMTPPLPortIndex INTEGER
  ol51nnMTPPLPortAdminState INTEGER
  ol51nnMTPPLPortBuddySlot INTEGER
  ol51nnMTPPLPortBuddyPort INTEGER
  ol51nnMTPPLPortDipAdminState INTEGER
  ol51nnMTPPLPortDipNetwork INTEGER
  ol51nnMTPPLPortLinkInteg INTEGER
  ol51nnMTPPLPortDipLinkInteg INTEGER
  ol51nnMTPPLPortSquelch INTEGER
  ol51nnMTPPLPortJabber INTEGER
  ol51nnMTPPLPortDipJabber INTEGER

Ol52nnMTPModEntry  
SEQUENCE    
  ol52nnMTPModSlotIndex INTEGER
  ol52nnMTPModRingSpeed INTEGER
  ol52nnMTPModDipRingSpeed INTEGER
  ol52nnMTPModCableImp INTEGER
  ol52nnMTPModDipCableImp INTEGER

Ol52nnMTPPortEntry  
SEQUENCE    
  ol52nnMTPPortSlotIndex INTEGER
  ol52nnMTPPortIndex INTEGER
  ol52nnMTPPortDipAdminState INTEGER
  ol52nnMTPPortStationType INTEGER

Ol52nnMTPTrunkEntry  
SEQUENCE    
  ol52nnMTPTrunkSlotIndex INTEGER
  ol52nnMTPTrunkIndex INTEGER
  ol52nnMTPTrunkDipAdminState INTEGER

Ol52nnMFRModEntry  
SEQUENCE    
  ol52nnMFRModSlotIndex INTEGER
  ol52nnMFRModRingSpeed INTEGER
  ol52nnMFRModDipRingSpeed INTEGER

Ol52nnMFRPortEntry  
SEQUENCE    
  ol52nnMFRPortSlotIndex INTEGER
  ol52nnMFRPortIndex INTEGER
  ol52nnMFRPortDipAdminState INTEGER
  ol52nnMFRPortCableImp INTEGER
  ol52nnMFRPortStationType INTEGER

Ol52nnMFRTrunkEntry  
SEQUENCE    
  ol52nnMFRTrunkSlotIndex INTEGER
  ol52nnMFRTrunkIndex INTEGER
  ol52nnMFRTrunkDipAdminState INTEGER
  ol52nnMFRTrunkCableMon INTEGER
  ol52nnMFRTrunkDipCableMon INTEGER
  ol52nnMFRTrunkCompMode INTEGER
  ol52nnMFRTrunkDipCompMode INTEGER
  ol52nnMFRTrunkNetMapState INTEGER
  ol52nnMFRTrunkExtBcnRecovery INTEGER

Ol51nnMTSModEntry  
SEQUENCE    
  ol51nnMTSModSlotIndex INTEGER
  ol51nnMTSModProtocols DisplayString
  ol51nnMTSModIpAddress IpAddress
  ol51nnMTSModTCPPort INTEGER
  ol51nnMTSModStationAddr OCTET STRING
  ol51nnMTSModDipNetwork INTEGER
  ol51nnMTSModCPURev DisplayString

Ol51nnMTSPortEntry  
SEQUENCE    
  ol51nnMTSPortSlotIndex INTEGER
  ol51nnMTSPortIndex INTEGER
  ol51nnMTSPortAdminState INTEGER
  ol51nnMTSPortOperState INTEGER

Ol51nnMFLModEntry  
SEQUENCE    
  ol51nnMFLModSlotIndex INTEGER
  ol51nnMFLModDipNetwork INTEGER

Ol51nnMFLPortEntry  
SEQUENCE    
  ol51nnMFLPortSlotIndex INTEGER
  ol51nnMFLPortIndex INTEGER
  ol51nnMFLPortAdminState INTEGER
  ol51nnMFLPortBuddySlot INTEGER
  ol51nnMFLPortBuddyPort INTEGER
  ol51nnMFLPortDipAdminState INTEGER

Ol50nnMRCTLModEntry  
SEQUENCE    
  ol50nnMRCTLModSlotIndex INTEGER
  ol50nnMRCTLModOperState INTEGER
  ol50nnMRCTLModClockStatus INTEGER
  ol50nnMRCTLModTempStatus INTEGER

Ol51nnMFBModEntry  
SEQUENCE    
  ol51nnMFBModSlotIndex INTEGER
  ol51nnMFBModDipNetwork INTEGER
  ol51nnMFBModLLW INTEGER
  ol51nnMFBModDipLLW INTEGER

Ol51nnMFBPortEntry  
SEQUENCE    
  ol51nnMFBPortSlotIndex INTEGER
  ol51nnMFBPortIndex INTEGER
  ol51nnMFBPortAdminState INTEGER
  ol51nnMFBPortBuddySlot INTEGER
  ol51nnMFBPortBuddyPort INTEGER
  ol51nnMFBPortDipAdminState INTEGER

Ol53nnMFBMICModEntry  
SEQUENCE    
  ol53nnMFBMICModSlotIndex INTEGER
  ol53nnMFBMICModDownStreamModule INTEGER
  ol53nnMFBMICModUpStreamModule INTEGER
  ol53nnMFBMICModDownStreamOperPath INTEGER
  ol53nnMFBMICModUpStreamOperPath INTEGER
  ol53nnMFBMICModRingInfo OCTET STRING

Ol53nnMFBMICPortEntry  
SEQUENCE    
  ol53nnMFBMICPortSlotIndex INTEGER
  ol53nnMFBMICPortIndex INTEGER
  ol53nnMFBMICPortConfig INTEGER
  ol53nnMFBMICPortPcmState INTEGER
  ol53nnMFBMICPortConnectState INTEGER
  ol53nnMFBMICPortNeighbor INTEGER
  ol53nnMFBMICPortRemoteMACIndicated INTEGER
  ol53nnMFBMICPortBSFlag INTEGER
  ol53nnMFBMICPortPCWithhold INTEGER
  ol53nnMFBMICPortLerCondition INTEGER

Ol53nnMFBMICTrunkEntry  
SEQUENCE    
  ol53nnMFBMICTrunkSlotIndex INTEGER
  ol53nnMFBMICTrunkIndex INTEGER

Ol53nnMFIBSTModEntry  
SEQUENCE    
  ol53nnMFIBSTModSlotIndex INTEGER
  ol53nnMFIBSTModDownStreamModule INTEGER
  ol53nnMFIBSTModUpStreamModule INTEGER
  ol53nnMFIBSTModDownStreamOperPath INTEGER
  ol53nnMFIBSTModUpStreamOperPath INTEGER
  ol53nnMFIBSTModRingInfo OCTET STRING

Ol53nnMFIBSTPortEntry  
SEQUENCE    
  ol53nnMFIBSTPortSlotIndex INTEGER
  ol53nnMFIBSTPortIndex INTEGER
  ol53nnMFIBSTPortConfig INTEGER
  ol53nnMFIBSTPortPcmState INTEGER
  ol53nnMFIBSTPortConnectState INTEGER
  ol53nnMFIBSTPortNeighbor INTEGER
  ol53nnMFIBSTPortRemoteMACIndicated INTEGER
  ol53nnMFIBSTPortBSFlag INTEGER
  ol53nnMFIBSTPortPCWithhold INTEGER
  ol53nnMFIBSTPortLerCondition INTEGER

Ol53nnMFIBSTTrunkEntry  
SEQUENCE    
  ol53nnMFIBSTTrunkSlotIndex INTEGER
  ol53nnMFIBSTTrunkIndex INTEGER

Ol53nnMSTPModEntry  
SEQUENCE    
  ol53nnMSTPModSlotIndex INTEGER
  ol53nnMSTPModDownStreamModule INTEGER
  ol53nnMSTPModUpStreamModule INTEGER
  ol53nnMSTPModDownStreamOperPath INTEGER
  ol53nnMSTPModUpStreamOperPath INTEGER
  ol53nnMSTPModRingInfo OCTET STRING

Ol53nnMSTPPortEntry  
SEQUENCE    
  ol53nnMSTPPortSlotIndex INTEGER
  ol53nnMSTPPortIndex INTEGER
  ol53nnMSTPPortConfig INTEGER
  ol53nnMSTPPortPcmState INTEGER
  ol53nnMSTPPortConnectState INTEGER
  ol53nnMSTPPortNeighbor INTEGER
  ol53nnMSTPPortRemoteMACIndicated INTEGER
  ol53nnMSTPPortBSFlag INTEGER
  ol53nnMSTPPortPCWithhold INTEGER
  ol53nnMSTPPortLerCondition INTEGER
  ol53nnMSTPPortPersonality INTEGER

Ol53nnMSTPTrunkEntry  
SEQUENCE    
  ol53nnMSTPTrunkSlotIndex INTEGER
  ol53nnMSTPTrunkIndex INTEGER

Ol51nnMTPCLModEntry  
SEQUENCE    
  ol51nnMTPCLModSlotIndex INTEGER
  ol51nnMTPCLModMonitorConn INTEGER
  ol51nnMTPCLModConn1Network INTEGER
  ol51nnMTPCLModConn2Network INTEGER
  ol51nnMTPCLModConn1DipNetwork INTEGER
  ol51nnMTPCLModConn2DipNetwork INTEGER
  ol51nnMTPCLModAutoPartition INTEGER

Ol51nnMTPCLPortEntry  
SEQUENCE    
  ol51nnMTPCLPortSlotIndex INTEGER
  ol51nnMTPCLPortIndex INTEGER
  ol51nnMTPCLPortAdminState INTEGER
  ol51nnMTPCLPortBuddySlot INTEGER
  ol51nnMTPCLPortBuddyPort INTEGER
  ol51nnMTPCLPortDipAdminState INTEGER
  ol51nnMTPCLPortLinkInteg INTEGER
  ol51nnMTPCLPortDipLinkInteg INTEGER

Ol52nnBTTModEntry  
SEQUENCE    
  ol52nnBTTModSlotIndex INTEGER
  ol52nnBTTModBridgeType INTEGER
  ol52nnBTTModSoftwareVersion DisplayString
  ol52nnBTTModSRBridgeNo INTEGER
  ol52nnBTTModNetworkStatus INTEGER

Ol52nnBTTPortEntry  
SEQUENCE    
  ol52nnBTTPortSlotIndex INTEGER
  ol52nnBTTPortIndex INTEGER
  ol52nnBTTPortConnector INTEGER
  ol52nnBTTPortSTAPState INTEGER
  ol52nnBTTPortIpAddress IpAddress
  ol52nnBTTPortMACAddress OCTET STRING
  ol52nnBTTPortThroughput Gauge
  ol52nnBTTPortForwarding Gauge
  ol52nnBTTPortSRRingNo INTEGER
  ol52nnBTTPortRingSpeed INTEGER

Ol52nnBTTTrunkEntry  
SEQUENCE    
  ol52nnBTTTrunkSlotIndex INTEGER
  ol52nnBTTTrunkIndex INTEGER

Ol52nnMMGTModEntry  
SEQUENCE    
  ol52nnMMGTModSlotIndex INTEGER
  ol52nnMMGTModMasterPriority INTEGER
  ol52nnMMGTModMasterStatus INTEGER
  ol52nnMMGTModStationAddr OCTET STRING
  ol52nnMMGTModRingSpeed INTEGER
  ol52nnMMGTModNetworkStatus INTEGER

Ol52nnMMGTPortEntry  
SEQUENCE    
  ol52nnMMGTPortSlotIndex INTEGER
  ol52nnMMGTPortIndex INTEGER
  ol52nnMMGTPortIpAddress IpAddress

Ol52nnMMGTTrunkEntry  
SEQUENCE    
  ol52nnMMGTTrunkSlotIndex INTEGER
  ol52nnMMGTTrunkIndex INTEGER
  ol52nnMMGTTrunkCableMon INTEGER
  ol52nnMMGTTrunkNetMapState INTEGER
  ol52nnMMGTTrunkExtBcnRecovery INTEGER

Ol51nnIxModEntry  
SEQUENCE    
  ol51nnIxModSlotIndex INTEGER
  ol51nnIxModSwType INTEGER
  ol51nnIxModStationAddr OCTET STRING
  ol51nnIxModDipPromDefaults INTEGER
  ol51nnIxModProtocols DisplayString

Ol51nnIxPortEntry  
SEQUENCE    
  ol51nnIxPortSlotIndex INTEGER
  ol51nnIxPortIndex INTEGER
  ol51nnIxPortDipAdminState INTEGER
  ol51nnIxPortSTAPState INTEGER
  ol51nnIxPortIpAddress IpAddress
  ol51nnIxPortDipNetwork INTEGER
  ol51nnIxPortDefNetwork INTEGER

Ol53nnMMGTModEntry  
SEQUENCE    
  ol53nnMMGTModSlotIndex INTEGER
  ol53nnMMGTModMasterPriority INTEGER
  ol53nnMMGTModMasterStatus INTEGER
  ol53nnMMGTModStationAddr OCTET STRING
  ol53nnMMGTModIpAddress IpAddress
  ol53nnMMGTModDownStreamMAC OCTET STRING
  ol53nnMMGTModUpStreamMAC OCTET STRING
  ol53nnMMGTModfddiMACPath INTEGER
  ol53nnMMGTModDownStreamModule INTEGER
  ol53nnMMGTModUpStreamModule INTEGER
  ol53nnMMGTModDownStreamOperPath INTEGER
  ol53nnMMGTModUpStreamOperPath INTEGER
  ol53nnMMGTModRingInfo OCTET STRING

Ol53nnMMGTPortEntry  
SEQUENCE    
  ol53nnMMGTPortSlotIndex INTEGER
  ol53nnMMGTPortIndex INTEGER
  ol53nnMMGTPortConfig INTEGER
  ol53nnMMGTPortPcmState INTEGER
  ol53nnMMGTPortConnectState INTEGER
  ol53nnMMGTPortNeighbor INTEGER
  ol53nnMMGTPortRemoteMACIndicated INTEGER
  ol53nnMMGTPortBSFlag INTEGER
  ol53nnMMGTPortPCWithhold INTEGER
  ol53nnMMGTPortLerCondition INTEGER

Ol53nnMMGTTrunkEntry  
SEQUENCE    
  ol53nnMMGTTrunkSlotIndex INTEGER
  ol53nnMMGTTrunkIndex INTEGER

Ol50nnMHCTLModEntry  
SEQUENCE    
  ol50nnMHCTLModSlotIndex INTEGER
  ol50nnMHCTLModOperState INTEGER
  ol50nnMHCTLModClockStatus INTEGER
  ol50nnMHCTLModTempStatus INTEGER
  ol50nnMHCTLModPDBStatus INTEGER
  ol50nnMHCTLModDipCh1ActCol INTEGER
  ol50nnMHCTLModDipCh2ActCol INTEGER
  ol50nnMHCTLModDipCh3ActCol INTEGER

Defined Values

chipcom 1.3.6.1.4.1.49
OBJECT IDENTIFIER    

chipmib02 1.3.6.1.4.1.49.2
OBJECT IDENTIFIER    

chipGen 1.3.6.1.4.1.49.2.1
OBJECT IDENTIFIER    

chipEcho 1.3.6.1.4.1.49.2.2
OBJECT IDENTIFIER    

chipProducts 1.3.6.1.4.1.49.2.3
OBJECT IDENTIFIER    

chipExperiment 1.3.6.1.4.1.49.2.4
OBJECT IDENTIFIER    

chipTTY 1.3.6.1.4.1.49.2.5
OBJECT IDENTIFIER    

chipTFTP 1.3.6.1.4.1.49.2.6
OBJECT IDENTIFIER    

chipDownload 1.3.6.1.4.1.49.2.7
OBJECT IDENTIFIER    

online 1.3.6.1.4.1.49.2.3.1
OBJECT IDENTIFIER    

oebm 1.3.6.1.4.1.49.2.3.2
OBJECT IDENTIFIER    

midnight 1.3.6.1.4.1.49.2.3.3
OBJECT IDENTIFIER    

workGroupHub 1.3.6.1.4.1.49.2.3.4
OBJECT IDENTIFIER    

emm 1.3.6.1.4.1.49.2.3.5
OBJECT IDENTIFIER    

chipBridge 1.3.6.1.4.1.49.2.3.6
OBJECT IDENTIFIER    

trmm 1.3.6.1.4.1.49.2.3.7
OBJECT IDENTIFIER    

fmm 1.3.6.1.4.1.49.2.3.8
OBJECT IDENTIFIER    

focus1 1.3.6.1.4.1.49.2.3.9
OBJECT IDENTIFIER    

oeim 1.3.6.1.4.1.49.2.3.10
OBJECT IDENTIFIER    

chipExpTokenRing 1.3.6.1.4.1.49.2.4.1
OBJECT IDENTIFIER    

dot1dBridge 1.3.6.1.4.1.49.2.4.14
OBJECT IDENTIFIER    

dot5 1.3.6.1.4.1.49.2.4.1.1
OBJECT IDENTIFIER    

olAgents 1.3.6.1.4.1.49.2.3.1.1
OBJECT IDENTIFIER    

olConc 1.3.6.1.4.1.49.2.3.1.2
OBJECT IDENTIFIER    

olEnv 1.3.6.1.4.1.49.2.3.1.3
OBJECT IDENTIFIER    

olModules 1.3.6.1.4.1.49.2.3.1.4
OBJECT IDENTIFIER    

olNets 1.3.6.1.4.1.49.2.3.1.5
OBJECT IDENTIFIER    

olGroups 1.3.6.1.4.1.49.2.3.1.6
OBJECT IDENTIFIER    

olAlarm 1.3.6.1.4.1.49.2.3.1.7
OBJECT IDENTIFIER    

olSpecMods 1.3.6.1.4.1.49.2.3.1.4.4
OBJECT IDENTIFIER    

ol50nnMCTL 1.3.6.1.4.1.49.2.3.1.4.4.3
OBJECT IDENTIFIER    

ol51nnMMGT 1.3.6.1.4.1.49.2.3.1.4.4.4
OBJECT IDENTIFIER    

ol51nnMFIB 1.3.6.1.4.1.49.2.3.1.4.4.5
OBJECT IDENTIFIER    

ol51nnMUTP 1.3.6.1.4.1.49.2.3.1.4.4.6
OBJECT IDENTIFIER    

ol51nnMTP 1.3.6.1.4.1.49.2.3.1.4.4.7
OBJECT IDENTIFIER    

ol51nnMBNC 1.3.6.1.4.1.49.2.3.1.4.4.8
OBJECT IDENTIFIER    

ol51nnBEE 1.3.6.1.4.1.49.2.3.1.4.4.9
OBJECT IDENTIFIER    

ol51nnRES 1.3.6.1.4.1.49.2.3.1.4.4.10
OBJECT IDENTIFIER    

ol51nnREE 1.3.6.1.4.1.49.2.3.1.4.4.11
OBJECT IDENTIFIER    

ol51nnMAUIF 1.3.6.1.4.1.49.2.3.1.4.4.12
OBJECT IDENTIFIER    

ol51nnMAUIM 1.3.6.1.4.1.49.2.3.1.4.4.13
OBJECT IDENTIFIER    

ol5208MTP 1.3.6.1.4.1.49.2.3.1.4.4.14
OBJECT IDENTIFIER    

ol51nnMFP 1.3.6.1.4.1.49.2.3.1.4.4.15
OBJECT IDENTIFIER    

ol51nnMFBP 1.3.6.1.4.1.49.2.3.1.4.4.16
OBJECT IDENTIFIER    

ol51nnMTPL 1.3.6.1.4.1.49.2.3.1.4.4.17
OBJECT IDENTIFIER    

ol51nnMTPPL 1.3.6.1.4.1.49.2.3.1.4.4.18
OBJECT IDENTIFIER    

ol52nnMTP 1.3.6.1.4.1.49.2.3.1.4.4.19
OBJECT IDENTIFIER    

ol52nnMFR 1.3.6.1.4.1.49.2.3.1.4.4.20
OBJECT IDENTIFIER    

ol51nnMTS 1.3.6.1.4.1.49.2.3.1.4.4.21
OBJECT IDENTIFIER    

ol51nnMFL 1.3.6.1.4.1.49.2.3.1.4.4.22
OBJECT IDENTIFIER    

ol50nnMRCTL 1.3.6.1.4.1.49.2.3.1.4.4.23
OBJECT IDENTIFIER    

ol51nnMFB 1.3.6.1.4.1.49.2.3.1.4.4.24
OBJECT IDENTIFIER    

ol53nnMMGT 1.3.6.1.4.1.49.2.3.1.4.4.25
OBJECT IDENTIFIER    

ol53nnMFBMIC 1.3.6.1.4.1.49.2.3.1.4.4.26
OBJECT IDENTIFIER    

ol53nnMFIBST 1.3.6.1.4.1.49.2.3.1.4.4.27
OBJECT IDENTIFIER    

ol53nnMSTP 1.3.6.1.4.1.49.2.3.1.4.4.28
OBJECT IDENTIFIER    

ol51nnMTPCL 1.3.6.1.4.1.49.2.3.1.4.4.29
OBJECT IDENTIFIER    

ol52nnBTT 1.3.6.1.4.1.49.2.3.1.4.4.30
OBJECT IDENTIFIER    

ol51nnIx 1.3.6.1.4.1.49.2.3.1.4.4.31
OBJECT IDENTIFIER    

ol52nnMMGT 1.3.6.1.4.1.49.2.3.1.4.4.32
OBJECT IDENTIFIER    

ol50nnMHCTL 1.3.6.1.4.1.49.2.3.1.4.4.33
OBJECT IDENTIFIER    

olNet 1.3.6.1.4.1.49.2.3.1.5.1
OBJECT IDENTIFIER    

olEnet 1.3.6.1.4.1.49.2.3.1.5.2
OBJECT IDENTIFIER    

olTRnet 1.3.6.1.4.1.49.2.3.1.5.3
OBJECT IDENTIFIER    

olFDDInet 1.3.6.1.4.1.49.2.3.1.5.4
OBJECT IDENTIFIER    

hubSysGroup 1.3.6.1.4.1.49.2.3.4.1
OBJECT IDENTIFIER    

hardwareGroup 1.3.6.1.4.1.49.2.3.4.2
OBJECT IDENTIFIER    

softwareGroup 1.3.6.1.4.1.49.2.3.4.3
OBJECT IDENTIFIER    

hubGroup 1.3.6.1.4.1.49.2.3.4.4
OBJECT IDENTIFIER    

boardGroup 1.3.6.1.4.1.49.2.3.4.5
OBJECT IDENTIFIER    

portGroup 1.3.6.1.4.1.49.2.3.4.6
OBJECT IDENTIFIER    

alarmGroup 1.3.6.1.4.1.49.2.3.4.7
OBJECT IDENTIFIER    

olThresh 1.3.6.1.4.1.49.2.3.1.7.1
OBJECT IDENTIFIER    

olThreshControl 1.3.6.1.4.1.49.2.3.1.7.1.1
OBJECT IDENTIFIER    

ol50nnMCTLModTable 1.3.6.1.4.1.49.2.3.1.4.4.3.1
A table that contains information about each 50nnM-CTL in the concentrator. Note, current architecture will limit the number of instances to one per concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol50nnMCTLModEntry

ol50nnMCTLModEntry 1.3.6.1.4.1.49.2.3.1.4.4.3.1.1
A list of information for each 50nnM-CTL module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol50nnMCTLModEntry  

ol50nnMCTLModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.3.1.1.1
The slot number for this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol50nnMCTLModTempStatus 1.3.6.1.4.1.49.2.3.1.4.4.3.1.1.2
The temperature as detected by the probes on this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER okay(1), extremeTemp(2)  

ol51nnMMGTModTable 1.3.6.1.4.1.49.2.3.1.4.4.4.1
A table that contains module information about each 51nnM-MGT module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMMGTModEntry

ol51nnMMGTModEntry 1.3.6.1.4.1.49.2.3.1.4.4.4.1.1
A list of module information for each 51nnM-MGT module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMMGTModEntry  

ol51nnMMGTModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.4.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMMGTModMasterPriority 1.3.6.1.4.1.49.2.3.1.4.4.4.1.1.2
The mastership priority of this agent. Ten is the highest and one is the lowest. Priority is only used when an election occurs. Mastership is not preemptive unless the reset mastership command is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), three(3), four(4), five(5), six(6), seven(7), eight(8), nine(9), ten(10)  

ol51nnMMGTModMasterStatus 1.3.6.1.4.1.49.2.3.1.4.4.4.1.1.3
The mastership status of this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER master(1), non-master(2), electing(3)  

ol51nnMMGTModStationAddr 1.3.6.1.4.1.49.2.3.1.4.4.4.1.1.4
A 6 octet address that uniquely identifies this module. The station address is the mac address of port 1. Note that EMMs before v3.0 will have 00-00-00-00-00-00 as their station address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

ol51nnMMGTPortTable 1.3.6.1.4.1.49.2.3.1.4.4.4.2
A table of information that contains port-specific information for each port on each 51nnM-MGT module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMMGTPortEntry

ol51nnMMGTPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.4.2.1
A list of information about a specific port on a 51nnM-MGT module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMMGTPortEntry  

ol51nnMMGTPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.4.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMMGTPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.4.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMMGTIpAddress 1.3.6.1.4.1.49.2.3.1.4.4.4.2.1.3
The IP Address associated with this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ol51nnMFIBModTable 1.3.6.1.4.1.49.2.3.1.4.4.5.1
A table of module-specific information for each 51nnM-FIB module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMFIBModEntry

ol51nnMFIBModEntry 1.3.6.1.4.1.49.2.3.1.4.4.5.1.1
A list of module-specific information associated with a particular 51nnM-FIB module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMFIBModEntry  

ol51nnMFIBModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.5.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMFIBModDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.5.1.1.2
The network indicated by the module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnMFIBModLLW 1.3.6.1.4.1.49.2.3.1.4.4.5.1.1.3
The current state of this module's low light warning configuration. Enabling this feature causes the module to check for low light and to issue a warning if low light is present. Disabling low light has the advantage of faster redundancy switchover in the event of a port error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMFIBModDipLLW 1.3.6.1.4.1.49.2.3.1.4.4.5.1.1.4
The low light warning configuration indicated by this module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMFIBPortTable 1.3.6.1.4.1.49.2.3.1.4.4.5.2
A table of port-specific information for each port of each 51nnM-FIB module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMFIBPortEntry

ol51nnMFIBPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.5.2.1
A list of information about a specific port on a 51nnM-FIB module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMFIBPortEntry  

ol51nnMFIBPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMFIBPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMFIBPortAdminState 1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.3
The desired state of this port. Setting this port to be redundant with invalid settings of buddy slot and buddy port will return the genError error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4)  

ol51nnMFIBPortBuddySlot 1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.4
The slot index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMFIBPortBuddyPort 1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.5
The port index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMFIBPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.6
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4)  

ol51nnMUTPModTable 1.3.6.1.4.1.49.2.3.1.4.4.6.1
A list of module-specific information associated with a particular 51nnM-UTP module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMUTPModEntry

ol51nnMUTPModEntry 1.3.6.1.4.1.49.2.3.1.4.4.6.1.1
A module entry containing objects that describe the module level for that particular module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMUTPModEntry  

ol51nnMUTPModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMUTPModDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.2
The network indicated by the module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnMUTPModCrossover 1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.3
The current state of this module's crossover configuration. Setting this object to uncrossed(2) allows the last port to be used to connect to another repeater. Often this feature is used to connect one 10BASE-T module to another.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER crossed(1), uncrossed(2)  

ol51nnMUTPModDipCrossover 1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.4
The crossover configuration indicated by this module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER crossed(1), uncrossed(2)  

ol51nnMUTPModFFL 1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.5
The number of bits to store in the repeater's fifo buffer. See the module user's guide for more information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER eight-bits(1), seven-bits(2)  

ol51nnMUTPModDipFFL 1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.6
The fifo fill level as indicated by this module's dip switches.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER eight-bits(1), seven-bits(2)  

ol51nnMUTPPortTable 1.3.6.1.4.1.49.2.3.1.4.4.6.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMUTPPortEntry

ol51nnMUTPPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.6.2.1
A port entry containing objects that describe this port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMUTPPortEntry  

ol51nnMUTPPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMUTPPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMUTPPortAdminState 1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.3
The desired state of this port. Setting this port to be redundant with invalid settings of buddy slot and buddy port will return the genError error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4)  

ol51nnMUTPPortBuddySlot 1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.4
The slot index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMUTPPortBuddyPort 1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.5
The port index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMUTPPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.6
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMUTPPortLinkInteg 1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.7
The port's link integrity configuration. Enabling link integrity configures the port to conform to the link integrity feature as specified by 10BASE-T.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMUTPPortDipLinkInteg 1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.8
The link integrity configuration as indicated by this port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMUTPPortSquelch 1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.9
The port's squelch configuration. See the module's user's guide for more information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), low(2)  

ol51nnMUTPPortDipSquelch 1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.10
The port's squelch configuration as indicated by this port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), low(2)  

ol51nnMTPModTable 1.3.6.1.4.1.49.2.3.1.4.4.7.1
A table of module-specific information for each 51nnM-TP module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMTPModEntry

ol51nnMTPModEntry 1.3.6.1.4.1.49.2.3.1.4.4.7.1.1
A list of module-specific information about a specific 51nnM-TP module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMTPModEntry  

ol51nnMTPModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.7.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTPModDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.7.1.1.2
The network indicated by the module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnMTPModCrossover 1.3.6.1.4.1.49.2.3.1.4.4.7.1.1.3
The current state of this module's crossover configuration. Setting this object to uncrossed(2) allows the last port to be used to connect to another repeater. Often this feature is used to connect one 10BASE-T module to another.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER crossed(1), uncrossed(2)  

ol51nnMTPModDipCrossover 1.3.6.1.4.1.49.2.3.1.4.4.7.1.1.4
The crossover configuration indicated by this module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER crossed(1), uncrossed(2)  

ol51nnMTPPortTable 1.3.6.1.4.1.49.2.3.1.4.4.7.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMTPPortEntry

ol51nnMTPPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.7.2.1
A port entry containing objects that describe this port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMTPPortEntry  

ol51nnMTPPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTPPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTPPortAdminState 1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.3
The desired state of this port. Setting this port to be redundant with invalid settings of buddy slot and buddy port will return the genError error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4)  

ol51nnMTPPortBuddySlot 1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.4
The slot index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMTPPortBuddyPort 1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.5
The port index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMTPPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.6
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMTPPortLinkInteg 1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.7
The port's link integrity configuration. Enabling link integrity configures the port to conform to the link integrity feature as specified by 10BASE-T.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMTPPortDipLinkInteg 1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.8
The link integrity configuration as indicated by this port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMTPPortSquelch 1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.9
The port's squelch configuration. See the module's user's guide for more information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), low(2)  

ol51nnMTPPortDipSquelch 1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.10
The port's squelch configuration as indicated by this port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), low(2)  

ol51nnMBNCModTable 1.3.6.1.4.1.49.2.3.1.4.4.8.1
A list of module-specific information associated with a particular 51nnM-BNC module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMBNCModEntry

ol51nnMBNCModEntry 1.3.6.1.4.1.49.2.3.1.4.4.8.1.1
A module entry containing objects that describe the module level for that particular module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMBNCModEntry  

ol51nnMBNCModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.8.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMBNCModDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.8.1.1.2
The network indicated by the module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnMBNCPortTable 1.3.6.1.4.1.49.2.3.1.4.4.8.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMBNCPortEntry

ol51nnMBNCPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.8.2.1
A port entry containing objects that describe this port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMBNCPortEntry  

ol51nnMBNCPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.8.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMBNCPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.8.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMBNCPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.8.2.1.3
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMBNCPortDipTermination 1.3.6.1.4.1.49.2.3.1.4.4.8.2.1.4
The state of this port's termination as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER terminated(1), not-terminated(2)  

ol51nnMBNCPortDipGround 1.3.6.1.4.1.49.2.3.1.4.4.8.2.1.5
The state of this port's ground as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER grounded(1), not-grounded(2)  

ol51nnBEEModTable 1.3.6.1.4.1.49.2.3.1.4.4.9.1
A table of module-specific information for each 51nnB-EE module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnBEEModEntry

ol51nnBEEModEntry 1.3.6.1.4.1.49.2.3.1.4.4.9.1.1
A list of module-specific information about a specific 51nnB-EE module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnBEEModEntry  

ol51nnBEEModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.9.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnBEEModStationAddr 1.3.6.1.4.1.49.2.3.1.4.4.9.1.1.2
A 6 octet address that uniquely identifies this module. The station address is the mac address of port 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

ol51nnBEEModProtocols 1.3.6.1.4.1.49.2.3.1.4.4.9.1.1.3
A textual description of the protocols supported by this module
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ol51nnBEEPortTable 1.3.6.1.4.1.49.2.3.1.4.4.9.2
A table of port-specific for each port of each 51nnBEE module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnBEEPortEntry

ol51nnBEEPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.9.2.1
A list of port-specific informatoin about a specific 51nnB-EE port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnBEEPortEntry  

ol51nnBEEPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.9.2.1.1
The slot number for this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnBEEPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.9.2.1.2
The port number for this port within this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnBEEPortIpAddress 1.3.6.1.4.1.49.2.3.1.4.4.9.2.1.3
The IP Address associated with this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ol51nnBEEPortDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.9.2.1.4
The network for this port as specified by this port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), front-panel(5), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnBEEPortDefNetwork 1.3.6.1.4.1.49.2.3.1.4.4.9.2.1.5
The network for this port as specified by the OEBM's non-volatile storage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), front-panel(5), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnRESModTable 1.3.6.1.4.1.49.2.3.1.4.4.10.1
A table of module-specific information for each 51nnR-ES module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnRESModEntry

ol51nnRESModEntry 1.3.6.1.4.1.49.2.3.1.4.4.10.1.1
A list of module-specific information about a specific 51nnR-ES module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnRESModEntry  

ol51nnRESModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.10.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnRESModStationAddr 1.3.6.1.4.1.49.2.3.1.4.4.10.1.1.2
A 6 octet address that uniquely identifies this module. The station address is the mac address of port 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

ol51nnRESModProtocols 1.3.6.1.4.1.49.2.3.1.4.4.10.1.1.3
A textual description of the protocols supported by this module
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ol51nnRESPortTable 1.3.6.1.4.1.49.2.3.1.4.4.10.2
A table of port-specific for each port of each 51nnR-ES module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnRESPortEntry

ol51nnRESPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.10.2.1
A list of port-specific informatoin about a specific 51nnR-ES port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnRESPortEntry  

ol51nnRESPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.10.2.1.1
The slot number for this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnRESPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.10.2.1.2
The port number for this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnRESPortIpAddress 1.3.6.1.4.1.49.2.3.1.4.4.10.2.1.3
The IP Address associated with this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ol51nnRESPortDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.10.2.1.4
The network for this port as specified by this port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), front-panel(5), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnRESPortDefNetwork 1.3.6.1.4.1.49.2.3.1.4.4.10.2.1.5
The network for this port as specified by the OERM's non-volatile storage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), front-panel(5), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnREEModTable 1.3.6.1.4.1.49.2.3.1.4.4.11.1
A table of module-specific information for each 51nnR-EE module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnREEModEntry

ol51nnREEModEntry 1.3.6.1.4.1.49.2.3.1.4.4.11.1.1
A list of module-specific information about a specific 51nnR-EE module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnREEModEntry  

ol51nnREEModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.11.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnREEModStationAddr 1.3.6.1.4.1.49.2.3.1.4.4.11.1.1.2
A 6 octet address that uniquely identifies this module. The station address is the mac address of port 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

ol51nnREEModProtocols 1.3.6.1.4.1.49.2.3.1.4.4.11.1.1.3
A textual description of the protocols supported by this module
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ol51nnREEPortTable 1.3.6.1.4.1.49.2.3.1.4.4.11.2
A table of port-specific for each port of each 51nnR-EE module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnREEPortEntry

ol51nnREEPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.11.2.1
A list of port-specific informatoin about a specific 51nnR-EE port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnREEPortEntry  

ol51nnREEPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.11.2.1.1
The slot number for this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnREEPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.11.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnREEPortIpAddress 1.3.6.1.4.1.49.2.3.1.4.4.11.2.1.3
The IP Address associated with this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ol51nnREEPortDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.11.2.1.4
The network for this port as specified by this port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), front-panel(5), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnREEPortDefNetwork 1.3.6.1.4.1.49.2.3.1.4.4.11.2.1.5
The network for this port as specified by the OERM's non-volatile storage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), front-panel(5), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnMAUIFModTable 1.3.6.1.4.1.49.2.3.1.4.4.12.1
A list of module-specific information associated with a particular 51nnMAUIF module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMAUIFModEntry

ol51nnMAUIFModEntry 1.3.6.1.4.1.49.2.3.1.4.4.12.1.1
A list of module-specific information about a specific 51nnMAUIF module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMAUIFModEntry  

ol51nnMAUIFModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.12.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMAUIFPortTable 1.3.6.1.4.1.49.2.3.1.4.4.12.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMAUIFPortEntry

ol51nnMAUIFPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.12.2.1
A list of module-specific information about a specific 51nnM-AUIF port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMAUIFPortEntry  

ol51nnMAUIFPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMAUIFPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMAUIFPortAdminState 1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.3
The desired state of this port. Setting this port to be redundant with invalid settings of buddy slot and buddy port will return the genError error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4)  

ol51nnMAUIFPortBuddySlot 1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.4
The slot index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMAUIFPortBuddyPort 1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.5
The port index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMAUIFPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.6
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4)  

ol51nnMAUIFPortDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.7
The network indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnMAUIMModTable 1.3.6.1.4.1.49.2.3.1.4.4.13.1
A list of module-specific information associated with a particular 51nnM-AUIM module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMAUIMModEntry

ol51nnMAUIMModEntry 1.3.6.1.4.1.49.2.3.1.4.4.13.1.1
A list of module-specific information about a specific 51nnM-AUIM module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMAUIMModEntry  

ol51nnMAUIMModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.13.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMAUIMPortTable 1.3.6.1.4.1.49.2.3.1.4.4.13.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMAUIMPortEntry

ol51nnMAUIMPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.13.2.1
A list of module-specific information about a specific 51nnM-AUIM port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMAUIMPortEntry  

ol51nnMAUIMPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMAUIMPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMAUIMPortAdminState 1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.3
The desired state of this port. Setting this port to be redundant with invalid settings of buddy slot and buddy port will return the genError error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4)  

ol51nnMAUIMPortBuddySlot 1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.4
The slot index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMAUIMPortBuddyPort 1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.5
The port index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMAUIMPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.6
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMAUIMPortDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.7
The network indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnMAUIMPortSQETest 1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.8
The current SQE test configuration for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMAUIMPortDipSQETest 1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.9
The SQE test configuration for this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMAUIMPortCollision 1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.10
The current collision configuration for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), alternate(2)  

ol51nnMAUIMPortDipCollision 1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.11
The collision configuration for this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), alternate(2)  

ol51nnMAUIMPortHalfStep 1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.12
The current step configuration for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMAUIMPortDipHalfStep 1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.13
The step configuration for this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol5208MTPModTable 1.3.6.1.4.1.49.2.3.1.4.4.14.1
A list of module-specific information associated with a particular 5208M-TP module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol5208MTPModEntry

ol5208MTPModEntry 1.3.6.1.4.1.49.2.3.1.4.4.14.1.1
A description of the 5208M-TP module attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol5208MTPModEntry  

ol5208MTPModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.14.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol5208MTPModBypsAdminState 1.3.6.1.4.1.49.2.3.1.4.4.14.1.1.2
The desired state of this module with respect to the ring. Setting this attribute to bypass(2) will cause this module to be removed from the ring that passes through the module's ring in and ring out ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER insert(1), bypass(2)  

ol5208MTPModBypsOperState 1.3.6.1.4.1.49.2.3.1.4.4.14.1.1.3
The operational state of this module with respect to the ring. If this attribute is equal to bypass(2), then the module has been removed from the ring that passes through the module's ring in and ring out ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER insert(1), bypass(2)  

ol5208MTPModDipCableImp 1.3.6.1.4.1.49.2.3.1.4.4.14.1.1.4
The setting of this module's port impedance matching, with 100 ohm corresponding to unshielded twisted pair cabling and 150 ohm corresponding to shielded twisted pair cabling. This setting is valid for all ports on this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ohm100(1), ohm150(2)  

ol5208MTPPortTable 1.3.6.1.4.1.49.2.3.1.4.4.14.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol5208MTPPortEntry

ol5208MTPPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.14.2.1
A description of 5208M-TP port attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol5208MTPPortEntry  

ol5208MTPPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.14.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol5208MTPPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.14.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol5208MTPPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.14.2.1.3
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol5208MTPPortStationType 1.3.6.1.4.1.49.2.3.1.4.4.14.2.1.4
Determines whether the station connected to this port has a MAC address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mac-present(1), mac-not-present(2)  

ol5208MTPTrunkTable 1.3.6.1.4.1.49.2.3.1.4.4.14.3
A list of trunk-specific information about each trunk for this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol5208MTPTrunkEntry

ol5208MTPTrunkEntry 1.3.6.1.4.1.49.2.3.1.4.4.14.3.1
A description of 5208M-TP trunk attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol5208MTPTrunkEntry  

ol5208MTPTrunkSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olTrunkSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol5208MTPTrunkIndex 1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.2
The trunk number for this trunk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol5208MTPTrunkDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.3
The state of this trunk as indicated by the trunk's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol5208MTPTrunkCableMon 1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.4
The cable monitor configuration for this trunk.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), notApplicable(3)  

ol5208MTPTrunkDipCableMon 1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.5
The cable monitor configuration as indicated by this trunk's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), notApplicable(3)  

ol5208MTPTrunkNetMapState 1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.6
The map state of the copper ring-in trunk. This should be set to external for ring-in trunks which connect to external hubs. The mapping logic will not operate on trunks which are set to external. This prevents incorrect mapping which can occur when a module in one hub detects the mapping signal from another hub. This attribute only applies to copper ring-in trunks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notApplicable(1), internal(2), external(3)  

ol5208MTPTrunkExtBcnRecovery 1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.7
Indicates whether the trunk is connected to a segment that will perform beacon recovery. This should be set to exists(1) for trunks which connect to hubs which perform beacon recovery. This attribute is used to determine the fault domain when resolving a beaconing condition. The beacon recovery process will resolve beaconing on trunks with this attribute set to nonExists(2) before trunks with the attribute set to exists(1) are resolved. For backplane trunks, setting to a value other than notApplicable will return invalidData error. The default value is nonExists(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER exists(1), nonExists(2), notApplicable(3)  

ol51nnMFPModTable 1.3.6.1.4.1.49.2.3.1.4.4.15.1
A list of module-specific information associated with a particular 51nnM-FP module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMFPModEntry

ol51nnMFPModEntry 1.3.6.1.4.1.49.2.3.1.4.4.15.1.1
A list of module-specific information about a specific 51nnM-FP module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMFPModEntry  

ol51nnMFPModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.15.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMFPPortTable 1.3.6.1.4.1.49.2.3.1.4.4.15.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMFPPortEntry

ol51nnMFPPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.15.2.1
A list of module-specific information about a specific 51nnM-FP port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMFPPortEntry  

ol51nnMFPPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMFPPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMFPPortAdminState 1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.3
The desired state of this port. Setting this port to be redundant with invalid settings of buddy slot and buddy port will return the genError error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4)  

ol51nnMFPPortBuddySlot 1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.4
The slot index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMFPPortBuddyPort 1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.5
The port index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMFPPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.6
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4)  

ol51nnMFPPortDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.7
The network indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnMFPPortLLW 1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.8
The current low light warning configuration for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMFPPortDipLLW 1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.9
The low light warning configuration indicated by this module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMFPPortHipwr 1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.10
The current high power optic configuration for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMFPPortDipHipwr 1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.11
The high power optic configuration for this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMFBPModTable 1.3.6.1.4.1.49.2.3.1.4.4.16.1
A list of module-specific information associated with a particular 51nnM-FBP module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMFBPModEntry

ol51nnMFBPModEntry 1.3.6.1.4.1.49.2.3.1.4.4.16.1.1
A list of module-specific information about a specific 51nnM-FBP module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMFBPModEntry  

ol51nnMFBPModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.16.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMFBPPortTable 1.3.6.1.4.1.49.2.3.1.4.4.16.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMFBPPortEntry

ol51nnMFBPPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.16.2.1
A list of module-specific information about a specific 51nnM-FBP port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMFBPPortEntry  

ol51nnMFBPPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMFBPPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMFBPPortAdminState 1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.3
The desired state of this port. Setting this port to be redundant with invalid settings of buddy slot and buddy port will return the genError error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4)  

ol51nnMFBPPortBuddySlot 1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.4
The slot index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMFBPPortBuddyPort 1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.5
The port index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMFBPPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.6
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4)  

ol51nnMFBPPortDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.7
The network indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnMFBPPortLLW 1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.8
The current low light warning configuration for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMFBPPortDipLLW 1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.9
The low light warning configuration indicated by this module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMFBPPortHipwr 1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.10
The current high power optic configuration for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMFBPPortDipHipwr 1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.11
The high power optic configuration for this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMTPLModTable 1.3.6.1.4.1.49.2.3.1.4.4.17.1
A list of module-specific information associated with a particular 51nnM-TPL module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMTPLModEntry

ol51nnMTPLModEntry 1.3.6.1.4.1.49.2.3.1.4.4.17.1.1
A list of module-specific information about a specific 51nnM-TPL module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMTPLModEntry  

ol51nnMTPLModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.17.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTPLModDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.17.1.1.2
The network indicated by the module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnMTPLPortTable 1.3.6.1.4.1.49.2.3.1.4.4.17.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMTPLPortEntry

ol51nnMTPLPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.17.2.1
A list of module-specific information about a specific 51nnM-TPL port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMTPLPortEntry  

ol51nnMTPLPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTPLPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTPLPortAdminState 1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.3
The desired state of this port. Setting this port to be redundant or for remote diagnostics with invalid settings of buddy slot and buddy port will return the genError error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4), remote-diagnostics(8)  

ol51nnMTPLPortBuddySlot 1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.4
The slot index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port. If the port is configured for remote diagnostics, then this contains the slot index of the backup buddy port. To configure a port for remote diagnostics, the buddy's slot and port must be set to valid values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMTPLPortBuddyPort 1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.5
The port index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port. If the port is configured for remote diagnostics, then this contains the port index of the backup buddy port. To configure a port for remote diagnostics, the buddy's slot and port must be set to valid values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMTPLPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.6
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMTPLPortLinkInteg 1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.7
The current link integrity configuration for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMTPLPortDipLinkInteg 1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.8
The link integrity configuration as indicated by this module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMTPLPortSquelch 1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.9
The current squelch configuration for this port. See the module's user's guide for more information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), low(2)  

ol51nnMTPLPortJabber 1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.10
The current receive jabber configuration for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMTPLPortDipJabber 1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.11
The receive jabber configuration as indicated by this module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMTPPLModTable 1.3.6.1.4.1.49.2.3.1.4.4.18.1
A list of module-specific information about a specific 51nnM-TPPL module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMTPPLModEntry

ol51nnMTPPLModEntry 1.3.6.1.4.1.49.2.3.1.4.4.18.1.1
A list of module-specific information about a specific 51nnM-TPPL module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMTPPLModEntry  

ol51nnMTPPLModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.18.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTPPLPortTable 1.3.6.1.4.1.49.2.3.1.4.4.18.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMTPPLPortEntry

ol51nnMTPPLPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.18.2.1
A list of module-specific information about a specific 51nnM-TPPL port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMTPPLPortEntry  

ol51nnMTPPLPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTPPLPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTPPLPortAdminState 1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.3
The desired state of this port. Setting this port to be redundant or for remote diagnostics with invalid settings of buddy slot and buddy port will return the genError error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4), remote-diagnostics(8)  

ol51nnMTPPLPortBuddySlot 1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.4
The slot index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port. If the port is configured for remote diagnostics, then this contains the slot index of the backup buddy port. To configure a port for remote diagnostics, the buddy's slot and port must be set to valid values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMTPPLPortBuddyPort 1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.5
The port index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port. If the port is configured for remote diagnostics, then this contains the port index of the backup buddy port. To configure a port for remote diagnostics, the buddy's slot and port must be set to valid values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMTPPLPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.6
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMTPPLPortDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.7
The network indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnMTPPLPortLinkInteg 1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.8
The current link integrity configuration for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMTPPLPortDipLinkInteg 1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.9
The link integrity configuration as indicated by this module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMTPPLPortSquelch 1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.10
The current squelch configuration for this port. See the module's user's guide for more information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), low(2)  

ol51nnMTPPLPortJabber 1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.11
The current receive jabber configuration for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMTPPLPortDipJabber 1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.12
The receive jabber configuration as indicated by this module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol52nnMTPModTable 1.3.6.1.4.1.49.2.3.1.4.4.19.1
A list of module-specific information about a specific 52nnM-TP module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol52nnMTPModEntry

ol52nnMTPModEntry 1.3.6.1.4.1.49.2.3.1.4.4.19.1.1
A description of the 52nnM-TP module attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol52nnMTPModEntry  

ol52nnMTPModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.19.1.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olModSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMTPModRingSpeed 1.3.6.1.4.1.49.2.3.1.4.4.19.1.1.2
The ring's bandwidth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fourMegabit(1), sixteenMegabit(2)  

ol52nnMTPModDipRingSpeed 1.3.6.1.4.1.49.2.3.1.4.4.19.1.1.3
The dip switch setting for the ring's bandwidth.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fourMegabit(1), sixteenMegabit(2)  

ol52nnMTPModCableImp 1.3.6.1.4.1.49.2.3.1.4.4.19.1.1.4
The setting of this module's port impedance matching, with 100 ohm corresponding to unshielded twisted pair cabling and 150 ohm corresponding to shielded twisted pair cabling. This setting is valid for all ports on this module.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ohm100(1), ohm150(2)  

ol52nnMTPModDipCableImp 1.3.6.1.4.1.49.2.3.1.4.4.19.1.1.5
The dip switch setting for the module's port impedance matching.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ohm100(1), ohm150(2)  

ol52nnMTPPortTable 1.3.6.1.4.1.49.2.3.1.4.4.19.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol52nnMTPPortEntry

ol52nnMTPPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.19.2.1
A description of 52nnM-TP port attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol52nnMTPPortEntry  

ol52nnMTPPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.19.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMTPPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.19.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMTPPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.19.2.1.3
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol52nnMTPPortStationType 1.3.6.1.4.1.49.2.3.1.4.4.19.2.1.4
Determines whether the station connected to this port has a MAC address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mac-present(1), mac-not-present(2)  

ol52nnMTPTrunkTable 1.3.6.1.4.1.49.2.3.1.4.4.19.3
A list of trunk-specific information about each trunk for this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol52nnMTPTrunkEntry

ol52nnMTPTrunkEntry 1.3.6.1.4.1.49.2.3.1.4.4.19.3.1
A description of 52nnM-TP trunk attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol52nnMTPTrunkEntry  

ol52nnMTPTrunkSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.19.3.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olTrunkSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMTPTrunkIndex 1.3.6.1.4.1.49.2.3.1.4.4.19.3.1.2
The trunk number for this trunk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMTPTrunkDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.19.3.1.3
The state of this trunk as indicated by the trunk's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol52nnMFRModTable 1.3.6.1.4.1.49.2.3.1.4.4.20.1
A list of module-specific information about a specific 52nnM-FR module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol52nnMFRModEntry

ol52nnMFRModEntry 1.3.6.1.4.1.49.2.3.1.4.4.20.1.1
A description of the 52nnMFR module attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol52nnMFRModEntry  

ol52nnMFRModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.20.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMFRModRingSpeed 1.3.6.1.4.1.49.2.3.1.4.4.20.1.1.2
The ring's bandwidth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fourMegabit(1), sixteenMegabit(2)  

ol52nnMFRModDipRingSpeed 1.3.6.1.4.1.49.2.3.1.4.4.20.1.1.3
The dip switch setting for the ring's bandwidth.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fourMegabit(1), sixteenMegabit(2)  

ol52nnMFRPortTable 1.3.6.1.4.1.49.2.3.1.4.4.20.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol52nnMFRPortEntry

ol52nnMFRPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.20.2.1
A description of 52nnMFR port attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol52nnMFRPortEntry  

ol52nnMFRPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.20.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMFRPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.20.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMFRPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.20.2.1.3
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol52nnMFRPortCableImp 1.3.6.1.4.1.49.2.3.1.4.4.20.2.1.4
The setting of this port's impedance matching, with 100 ohm corresponding to unshielded twisted pair cabling and 150 ohm corresponding to shielded twisted pair cabling.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ohm100(1), ohm150(2)  

ol52nnMFRPortStationType 1.3.6.1.4.1.49.2.3.1.4.4.20.2.1.5
Determines whether the station connected to this port has a MAC address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mac-present(1), mac-not-present(2)  

ol52nnMFRTrunkTable 1.3.6.1.4.1.49.2.3.1.4.4.20.3
A list of trunk-specific information about each trunk for this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol52nnMFRTrunkEntry

ol52nnMFRTrunkEntry 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1
A description of 52nnMFR trunk attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol52nnMFRTrunkEntry  

ol52nnMFRTrunkSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olTrunkSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMFRTrunkIndex 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.2
The trunk number of this trunk.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMFRTrunkDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.3
The state of this trunk as indicated by the trunk's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol52nnMFRTrunkCableMon 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.4
The cable monitor configuration for this trunk. This does not apply to fiber trunks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), notApplicable(3)  

ol52nnMFRTrunkDipCableMon 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.5
The cable monitor configuration as indicated by this trunk's dip switches. This does not apply to fiber trunks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), notApplicable(3)  

ol52nnMFRTrunkCompMode 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.6
The compatibility mode for this trunk. This only applies to fiber trunks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), notApplicable(3)  

ol52nnMFRTrunkDipCompMode 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.7
The compatibility mode as indicated by this trunk's dip switches. This only applies to fiber trunks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), notApplicable(3)  

ol52nnMFRTrunkNetMapState 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.8
The map state of the copper ring-in trunk. This should be set to external for ring-in trunks which connect to external hubs. The mapping logic will not operate on trunks which are set to external. This prevents incorrect mapping which can occur when a module in one hub detects the mapping signal from another hub. This attribute only applies to copper ring-in trunks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notApplicable(1), internal(2), external(3)  

ol52nnMFRTrunkExtBcnRecovery 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.9
Indicates whether the trunk is connected to a segment that will perform beacon recovery. This should be set to exists(1) for trunks which connect to hubs which perform beacon recovery. This attribute is used to determine the fault domain when resolving a beaconing condition. The beacon recovery process will resolve beaconing on trunks with this attribute set to nonExists(2) before trunks with the attribute set to exists(1) are resolved. For backplane trunks, setting to a value other than notApplicable will return invalidData error. The default value is nonExists(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER exists(1), nonExists(2), notApplicable(3)  

ol51nnMTSModTable 1.3.6.1.4.1.49.2.3.1.4.4.21.1
A table of module-specific information for each 51nnM-TS module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMTSModEntry

ol51nnMTSModEntry 1.3.6.1.4.1.49.2.3.1.4.4.21.1.1
A list of module information for each 51nnMTS module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMTSModEntry  

ol51nnMTSModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTSModProtocols 1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.2
A textual description of the protocols supported by this module
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ol51nnMTSModIpAddress 1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.3
The IP Address of the terminal terver.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ol51nnMTSModTCPPort 1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.4
The TCP port number of the the terminal server's remote console port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTSModStationAddr 1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.5
A 6 octet address that uniquely identifies this module. The station address is the mac address of the terminal server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

ol51nnMTSModDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.6
The network indicated by the module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnMTSModCPURev 1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.7
The terminal server's CPU revision.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..10)  

ol51nnMTSPortTable 1.3.6.1.4.1.49.2.3.1.4.4.21.2
A table of information that contains port-specific information for each port on each 51nnMTS module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMTSPortEntry

ol51nnMTSPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.21.2.1
A list of information about a specific port on a 51nnMTS module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMTSPortEntry  

ol51nnMTSPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.21.2.1.1
The slot number for this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTSPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.21.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTSPortAdminState 1.3.6.1.4.1.49.2.3.1.4.4.21.2.1.3
The administrative state of this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), local(6), remote(7)  

ol51nnMTSPortOperState 1.3.6.1.4.1.49.2.3.1.4.4.21.2.1.4
The operational mode of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), local(2), connected(3)  

ol51nnMFLModTable 1.3.6.1.4.1.49.2.3.1.4.4.22.1
A table of module-specific information for each 51nnM-FL module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMFLModEntry

ol51nnMFLModEntry 1.3.6.1.4.1.49.2.3.1.4.4.22.1.1
A list of module-specific information associated with a particular 51nnM-FL module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMFLModEntry  

ol51nnMFLModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.22.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMFLModDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.22.1.1.2
The network indicated by the module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnMFLPortTable 1.3.6.1.4.1.49.2.3.1.4.4.22.2
A table of port-specific information for each port of each 51nnMFL module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMFLPortEntry

ol51nnMFLPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.22.2.1
A list of information about a specific port on a 51nnMFL module.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMFLPortEntry  

ol51nnMFLPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olPortSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMFLPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMFLPortAdminState 1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.3
The desired state of this port. Setting this port to be redundant with invalid settings of buddy slot and buddy port will return invalidData error. Remote Failure Signaling (RFS), is set on connected module port to permit transmit error detection on local port. Port must be set to be RFS when connected port is set to be redundant
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4), redundant-rfs(5)  

ol51nnMFLPortBuddySlot 1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.4
The slot index of the redundant port's buddy.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMFLPortBuddyPort 1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.5
The port index of the redundant port's buddy.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMFLPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.6
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4), redundant-rfs(5)  

ol50nnMRCTLModTable 1.3.6.1.4.1.49.2.3.1.4.4.23.1
A table that contains information about each 50nnMRCTL in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol50nnMRCTLModEntry

ol50nnMRCTLModEntry 1.3.6.1.4.1.49.2.3.1.4.4.23.1.1
A list of information for each 50nnMRCTL module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol50nnMRCTLModEntry  

ol50nnMRCTLModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.23.1.1.1
The slot number for this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol50nnMRCTLModOperState 1.3.6.1.4.1.49.2.3.1.4.4.23.1.1.2
The operational state of the 50nnMRCTL module. Specifically, this is an indicator of whether the 50nnMRCTL module is providing clock signals to the backplane. An active 50nnMRCTL module provides clock signals to the backplane while a standby 50nnMRCTL module does not. Note that only one 50nnMRCTL module will be active at any given time; all other 50nnMRCTL modules in the concentrator will be in standby mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), standby(2)  

ol50nnMRCTLModClockStatus 1.3.6.1.4.1.49.2.3.1.4.4.23.1.1.3
The current status of the on-board clocks on this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER okay(1), faulty(2)  

ol50nnMRCTLModTempStatus 1.3.6.1.4.1.49.2.3.1.4.4.23.1.1.4
The temperature as detected by the probe on this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER okay(1), extremeTemp(2)  

ol51nnMFBModTable 1.3.6.1.4.1.49.2.3.1.4.4.24.1
A list of module-specific information associated with a particular 51nnM-FB module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMFBModEntry

ol51nnMFBModEntry 1.3.6.1.4.1.49.2.3.1.4.4.24.1.1
A list of module-specific information about a specific 51nnM-FB module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMFBModEntry  

ol51nnMFBModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.24.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMFBModDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.24.1.1.2
The network indicated by the module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnMFBModLLW 1.3.6.1.4.1.49.2.3.1.4.4.24.1.1.3
The current state of this module's low light warning configuration. Enabling this feature causes the module to check for low light and to issue a warning if low light is present. Disabling low light has the advantage of faster redundancy switchover in the event of a port error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMFBModDipLLW 1.3.6.1.4.1.49.2.3.1.4.4.24.1.1.4
The low light warning configuration indicated by this module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMFBPortTable 1.3.6.1.4.1.49.2.3.1.4.4.24.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMFBPortEntry

ol51nnMFBPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.24.2.1
A list of module-specific information about a specific 51nnM-FB port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMFBPortEntry  

ol51nnMFBPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMFBPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMFBPortAdminState 1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.3
The desired state of this port. Setting this port to be redundant with invalid settings of buddy slot and buddy port will return the genError error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4)  

ol51nnMFBPortBuddySlot 1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.4
The slot index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMFBPortBuddyPort 1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.5
The port index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMFBPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.6
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol53nnMFBMICModTable 1.3.6.1.4.1.49.2.3.1.4.4.26.1
A list of module attributes that apply to this model. To access an ol53nnMFBMICModTable entry, the ol53nnMFBMICModSlotIndex attribute is used.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol53nnMFBMICModEntry

ol53nnMFBMICModEntry 1.3.6.1.4.1.49.2.3.1.4.4.26.1.1
A list of module-specific information about a specific 53nnM-FBMIC module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol53nnMFBMICModEntry  

ol53nnMFBMICModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olModSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMFBMICModDownStreamModule 1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.2
Down stream slot (transmit to)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

ol53nnMFBMICModUpStreamModule 1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.3
Up stream slot (receve from)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

ol53nnMFBMICModDownStreamOperPath 1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.4
Transmit DBA (debug only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), fddi-path-1(24), fddi-path-2(25), fddi-path-3(26), fddi-path-4(27), fddi-path-5(28), fddi-path-6(29), fddi-path-7(30), fddi-path-8(31)  

ol53nnMFBMICModUpStreamOperPath 1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.5
Receive DBA (debug only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), fddi-path-1(24), fddi-path-2(25), fddi-path-3(26), fddi-path-4(27), fddi-path-5(28), fddi-path-6(29), fddi-path-7(30), fddi-path-8(31)  

ol53nnMFBMICModRingInfo 1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.6
An array which is indexed by DBA number. Each element contains the slot number (1..16) which is assigned to transmit on this DBA. (debug only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..8)  

ol53nnMFBMICPortTable 1.3.6.1.4.1.49.2.3.1.4.4.26.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol53nnMFBMICPortEntry

ol53nnMFBMICPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.26.2.1
A list of module-specific information about a specific 53nnM-FBMIC port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol53nnMFBMICPortEntry  

ol53nnMFBMICPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olPortSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMFBMICPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.2
A unique value that identifies a particular port within this module. Its value ranges between 1 and olModPortNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olPortIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMFBMICPortConfig 1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.3
Specifies the FDDI port type. If the port is on an FPM, the only allowed values are slave(3), and master(4). In addition, there can only be one active slave port on any concentrator FDDI network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER slave(3), master(4)  

ol53nnMFBMICPortPcmState 1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.4
(refer to ANSI SMT 9.6.2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pc0(1), pc1(2), pc2(3), pc3(4), pc4(5), pc5(6), pc6(7), pc7(8), pc8(9), pc9(10)  

ol53nnMFBMICPortConnectState 1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.5
An indication of the connect state of this PORT. Basically, this gives a higher level view of the state of the connection by grouping PCM states and the PC-Withhold flag state. The supported values and their corresponding PCM states and PC-Withhold condition, when relevant, are: disabled: (PC0:Off, PC9:Maint) connecting: (PC1(Break) || PC3 (Connect) || PC4(next) || PC5 (Signal) || PC6(Join) || PC7 (Verify)) && (PC_Withhold = None) standby: (PC_Withhold != None) active: (PC2:Trace || PC8:Active)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), connecting(2), standby(3), active(4)  

ol53nnMFBMICPortNeighbor 1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.6
The type (PC_Neighbor) of the remote PORT that is determined in PC_Signaling in R_Val (1,2) (refer to ANSI SMT 9.6.3.2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER a(1), b(2), slave(3), master(4), unknown(5)  

ol53nnMFBMICPortRemoteMACIndicated 1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.7
The indication, in PC-Signaling that the remote partner intends to place a MAC in the output token PATH of this PORT. Signaled as R_Val (9) (refer to ANSI SMT 9.6.3.2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

ol53nnMFBMICPortBSFlag 1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.8
The Break State, BS_Flag (refer to ANSI SMT 9.4.3.4).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

ol53nnMFBMICPortPCWithhold 1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.9
PC_Withhold, (refer to ANSI SMT 9.4.1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), m-m(2), other(3)  

ol53nnMFBMICPortLerCondition 1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.10
This variable is set to true whenever LerEstimate is less than or equal to LerAlarm (the larger the number the smaller the value).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bad(1), okay(2)  

ol53nnMFBMICTrunkTable 1.3.6.1.4.1.49.2.3.1.4.4.26.3
FDDI module specific trunk table variables. At present there are none.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol53nnMFBMICTrunkEntry

ol53nnMFBMICTrunkEntry 1.3.6.1.4.1.49.2.3.1.4.4.26.3.1
A description of 53nnM-FBMIC trunk attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol53nnMFBMICTrunkEntry  

ol53nnMFBMICTrunkSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.26.3.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olTrunkSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMFBMICTrunkIndex 1.3.6.1.4.1.49.2.3.1.4.4.26.3.1.2
A unique value that identifies a particular trunk within this module. Its value ranges between 1 and olModTrunkNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olTrunkIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMFIBSTModTable 1.3.6.1.4.1.49.2.3.1.4.4.27.1
A list of module attributes that apply to this model. To access an ol53nnMFIBSTModTable entry, the ol53nnMFIBSTModSlotIndex attribute is used.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol53nnMFIBSTModEntry

ol53nnMFIBSTModEntry 1.3.6.1.4.1.49.2.3.1.4.4.27.1.1
A list of module-specific information about a specific 53nnM-FIBST module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol53nnMFIBSTModEntry  

ol53nnMFIBSTModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olModSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMFIBSTModDownStreamModule 1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.2
Down stream slot (transmit to)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

ol53nnMFIBSTModUpStreamModule 1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.3
Up stream slot (receve from)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

ol53nnMFIBSTModDownStreamOperPath 1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.4
Transmit DBA (debug only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), fddi-path-1(24), fddi-path-2(25), fddi-path-3(26), fddi-path-4(27), fddi-path-5(28), fddi-path-6(29), fddi-path-7(30), fddi-path-8(31)  

ol53nnMFIBSTModUpStreamOperPath 1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.5
Receive DBA (debug only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), fddi-path-1(24), fddi-path-2(25), fddi-path-3(26), fddi-path-4(27), fddi-path-5(28), fddi-path-6(29), fddi-path-7(30), fddi-path-8(31)  

ol53nnMFIBSTModRingInfo 1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.6
An array which is indexed by DBA number. Each element contains the slot number (1..16) which is assigned to transmit on this DBA. (debug only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..8)  

ol53nnMFIBSTPortTable 1.3.6.1.4.1.49.2.3.1.4.4.27.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol53nnMFIBSTPortEntry

ol53nnMFIBSTPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.27.2.1
A list of module-specific information about a specific 53nnM-FIBST port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol53nnMFIBSTPortEntry  

ol53nnMFIBSTPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olPortSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMFIBSTPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.2
A unique value that identifies a particular port within this module. Its value ranges between 1 and olModPortNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olPortIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMFIBSTPortConfig 1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.3
Specifies the FDDI port type. If the port is on an FPM, the only allowed values are slave(3) and master(4). In addition, there can only be one active slave port on any concentrator FDDI network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER slave(3), master(4)  

ol53nnMFIBSTPortPcmState 1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.4
(refer to ANSI SMT 9.6.2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pc0(1), pc1(2), pc2(3), pc3(4), pc4(5), pc5(6), pc6(7), pc7(8), pc8(9), pc9(10)  

ol53nnMFIBSTPortConnectState 1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.5
An indication of the connect state of this PORT. Basically, this gives a higher level view of the state of the connection by grouping PCM states and the PC-Withhold flag state. The supported values and their corresponding PCM states and PC-Withhold condition, when relevant, are: disabled: (PC0:Off, PC9:Maint) connecting: (PC1(Break) || PC3 (Connect) || PC4(next) || PC5 (Signal) || PC6(Join) || PC7 (Verify)) && (PC_Withhold = None) standby: (PC_Withhold != None) active: (PC2:Trace || PC8:Active)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), connecting(2), standby(3), active(4)  

ol53nnMFIBSTPortNeighbor 1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.6
The type (PC_Neighbor) of the remote PORT that is determined in PC_Signaling in R_Val (1,2) (refer to ANSI SMT 9.6.3.2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER a(1), b(2), slave(3), master(4), unknown(5)  

ol53nnMFIBSTPortRemoteMACIndicated 1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.7
The indication, in PC-Signaling that the remote partner intends to place a MAC in the output token PATH of this PORT. Signaled as R_Val (9) (refer to ANSI SMT 9.6.3.2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

ol53nnMFIBSTPortBSFlag 1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.8
The Break State, BS_Flag (refer to ANSI SMT 9.4.3.4).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

ol53nnMFIBSTPortPCWithhold 1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.9
PC_Withhold, (refer to ANSI SMT 9.4.1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), m-m(2), other(3)  

ol53nnMFIBSTPortLerCondition 1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.10
This variable is set to true whenever LerEstimate is less than or equal to LerAlarm (the larger the number the smaller the value).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bad(1), okay(2)  

ol53nnMFIBSTTrunkTable 1.3.6.1.4.1.49.2.3.1.4.4.27.3
FDDI module specific trunk table variables. At present there are none.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol53nnMFIBSTTrunkEntry

ol53nnMFIBSTTrunkEntry 1.3.6.1.4.1.49.2.3.1.4.4.27.3.1
A description of 53nnM-FIBST trunk attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol53nnMFIBSTTrunkEntry  

ol53nnMFIBSTTrunkSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.27.3.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olTrunkSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMFIBSTTrunkIndex 1.3.6.1.4.1.49.2.3.1.4.4.27.3.1.2
A unique value that identifies a particular trunk within this module. Its value ranges between 1 and olModTrunkNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olTrunkIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMSTPModTable 1.3.6.1.4.1.49.2.3.1.4.4.28.1
A list of module attributes that apply to this model. To access an ol53nnMSTPModTable entry, the ol53nnMSTPModSlotIndex attribute is used.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol53nnMSTPModEntry

ol53nnMSTPModEntry 1.3.6.1.4.1.49.2.3.1.4.4.28.1.1
A list of module-specific information about a specific 53nnM-FIBSTP module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol53nnMSTPModEntry  

ol53nnMSTPModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olModSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMSTPModDownStreamModule 1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.2
Down stream slot (transmit to)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

ol53nnMSTPModUpStreamModule 1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.3
Down stream slot (receve from)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

ol53nnMSTPModDownStreamOperPath 1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.4
transmit DBA (debug only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), fddi-path-1(24), fddi-path-2(25), fddi-path-3(26), fddi-path-4(27), fddi-path-5(28), fddi-path-6(29), fddi-path-7(30), fddi-path-8(31)  

ol53nnMSTPModUpStreamOperPath 1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.5
receive DBA (debug only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), fddi-path-1(24), fddi-path-2(25), fddi-path-3(26), fddi-path-4(27), fddi-path-5(28), fddi-path-6(29), fddi-path-7(30), fddi-path-8(31)  

ol53nnMSTPModRingInfo 1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.6
An array which is indexed by DBA number. Each element contains the slot number (1..16) which is assigned to transmit on this DBA. (debug only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..8)  

ol53nnMSTPPortTable 1.3.6.1.4.1.49.2.3.1.4.4.28.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol53nnMSTPPortEntry

ol53nnMSTPPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.28.2.1
A list of module-specific information about a specific 53nnM-STP port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol53nnMSTPPortEntry  

ol53nnMSTPPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olPortSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMSTPPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.2
A unique value that identifies a particular port within this module. Its value ranges between 1 and olModPortNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olPortIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMSTPPortConfig 1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.3
Specifies the FDDI port type. If the port is on an FPM, the only allowed values are slave(3) and master(4). In addition, there can only be one active slave port on any concentrator FDDI network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER slave(3), master(4)  

ol53nnMSTPPortPcmState 1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.4
(refer to ANSI SMT 9.6.2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pc0(1), pc1(2), pc2(3), pc3(4), pc4(5), pc5(6), pc6(7), pc7(8), pc8(9), pc9(10)  

ol53nnMSTPPortConnectState 1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.5
An indication of the connect state of this PORT. Basically, this gives a higher level view of the state of the connection by grouping PCM states and the PC-Withhold flag state. The supported values and their corresponding PCM states and PC-Withhold condition, when relevant, are: disabled: (PC0:Off, PC9:Maint) connecting: (PC1(Break) || PC3 (Connect) || PC4(next) || PC5 (Signal) || PC6(Join) || PC7 (Verify)) && (PC_Withhold = None) standby: (PC_Withhold != None) active: (PC2:Trace || PC8:Active)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), connecting(2), standby(3), active(4)  

ol53nnMSTPPortNeighbor 1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.6
The type (PC_Neighbor) of the remote PORT that is determined in PC_Signaling in R_Val (1,2) (refer to ANSI SMT 9.6.3.2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER a(1), b(2), slave(3), master(4), unknown(5)  

ol53nnMSTPPortRemoteMACIndicated 1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.7
The indication, in PC-Signaling that the remote partner intends to place a MAC in the output token PATH of this PORT. Signaled as R_Val (9) (refer to ANSI SMT 9.6.3.2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

ol53nnMSTPPortBSFlag 1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.8
The Break State, BS_Flag (refer to ANSI SMT 9.4.3.4).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

ol53nnMSTPPortPCWithhold 1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.9
PC_Withhold, (refer to ANSI SMT 9.4.1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), m-m(2), other(3)  

ol53nnMSTPPortLerCondition 1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.10
This variable is set to true whenever LerEstimate is less than or equal to LerAlarm (the larger the number the smaller the value).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bad(1), okay(2)  

ol53nnMSTPPortPersonality 1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.11
Specifies the physical signaling used by the port, the only valid values are sddi(3) and tpddi(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sddi(1), tpddi(2)  

ol53nnMSTPTrunkTable 1.3.6.1.4.1.49.2.3.1.4.4.28.3
FDDI module specific trunk table variables. At present there are none.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol53nnMSTPTrunkEntry

ol53nnMSTPTrunkEntry 1.3.6.1.4.1.49.2.3.1.4.4.28.3.1
A description of 53nnM-STP trunk attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol53nnMSTPTrunkEntry  

ol53nnMSTPTrunkSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.28.3.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olTrunkSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMSTPTrunkIndex 1.3.6.1.4.1.49.2.3.1.4.4.28.3.1.2
A unique value that identifies a particular trunk within this module. Its value ranges between 1 and olModTrunkNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olTrunkIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTPCLModTable 1.3.6.1.4.1.49.2.3.1.4.4.29.1
A list of module-specific information about a specific 51nnM-TPCL module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMTPCLModEntry

ol51nnMTPCLModEntry 1.3.6.1.4.1.49.2.3.1.4.4.29.1.1
A list of module-specific information about a specific 51nnM-TPCL module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMTPCLModEntry  

ol51nnMTPCLModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTPCLModMonitorConn 1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.2
When both connectors are on the same network: Setting this object to connector-1 allows the EMM to monitor the port statistics of port 1-12 on a per-port basis, and the port statistics of port 13-24 are summed and are reported through port 13. Setting this object to connector-2 allows the EMM to monitor the port statistics of port 12-24 on a per-port basis, and the port statistics of port 1-12 are summed and are reported through port 13. Note: when the 2 connectors are on different networks, setting this object to the value connector-1 or connector-2 will not have any effect. The port counters will be cleared whenever the value of this object is changed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER connector-1(1), connector-2(2)  

ol51nnMTPCLModConn1Network 1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.3
The network that this connector is attached to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernet-1(6), ethernet-2(7), ethernet-3(8), isolated-1(21), isolated-2(22)  

ol51nnMTPCLModConn2Network 1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.4
The network that this connector is attached to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernet-1(6), ethernet-2(7), ethernet-3(8), isolated-1(21), isolated-2(22)  

ol51nnMTPCLModConn1DipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.5
The network indicated by the connector dip switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ethernet-1(6), ethernet-2(7), ethernet-3(8), isolated-1(21), isolated-2(22)  

ol51nnMTPCLModConn2DipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.6
The network indicated by the connector dip switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ethernet-1(6), ethernet-2(7), ethernet-3(8), isolated-1(21), isolated-2(22)  

ol51nnMTPCLModAutoPartition 1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.7
This object holds the consecutive collision count limit value. The module goes into the auto-partition mode whenever the consecutive collision count exceeds the consecutive collision limit count.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER collisions-31(1), collisions-63(2), collisions-127(3), collisions-255(4)  

ol51nnMTPCLPortTable 1.3.6.1.4.1.49.2.3.1.4.4.29.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnMTPCLPortEntry

ol51nnMTPCLPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.29.2.1
A list of module-specific information about a specific 51nnM-TPCL port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnMTPCLPortEntry  

ol51nnMTPCLPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTPCLPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnMTPCLPortAdminState 1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.3
The desired state of this port. Setting this port to be redundant or for remote diagnostics with invalid settings of buddy slot and buddy port will return the genError error.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), redundant-primary(3), redundant-backup(4), remote-diagnostics(8)  

ol51nnMTPCLPortBuddySlot 1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.4
The slot index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port. If the port is configured for remote diagnostics, then this contains the slot index of the backup buddy port. To configure a port for remote diagnostics, the buddy's slot and port must be set to valid values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMTPCLPortBuddyPort 1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.5
The port index of the redundant port's buddy. To set a port to be redundant, the buddy's slot and port must be set to valid values. The buddy is automatically set to be redundant to this port. If the port is configured for remote diagnostics, then this contains the port index of the backup buddy port. To configure a port for remote diagnostics, the buddy's slot and port must be set to valid values.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

ol51nnMTPCLPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.6
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMTPCLPortLinkInteg 1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.7
The current link integrity configuration for this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnMTPCLPortDipLinkInteg 1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.8
The link integrity configuration as indicated by this dip switch.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol52nnBTTModTable 1.3.6.1.4.1.49.2.3.1.4.4.30.1
A table of module-specific information for each 52nnB-TT module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol52nnBTTModEntry

ol52nnBTTModEntry 1.3.6.1.4.1.49.2.3.1.4.4.30.1.1
A list of module-specific information about a specific 52nnB-TT module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol52nnBTTModEntry  

ol52nnBTTModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.30.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnBTTModBridgeType 1.3.6.1.4.1.49.2.3.1.4.4.30.1.1.2
Whether the bridge is a source-routing bridge or a source-routing-transparent bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bridge-type-sr(1), bridge-type-srt(2)  

ol52nnBTTModSoftwareVersion 1.3.6.1.4.1.49.2.3.1.4.4.30.1.1.3
The version number of the software loaded into the module's flash chips.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..10)  

ol52nnBTTModSRBridgeNo 1.3.6.1.4.1.49.2.3.1.4.4.30.1.1.4
The module's source routing bridge number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnBTTModNetworkStatus 1.3.6.1.4.1.49.2.3.1.4.4.30.1.1.5
The status of the ring containing this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER okay(1), closed(2), beaconing(3)  

ol52nnBTTPortTable 1.3.6.1.4.1.49.2.3.1.4.4.30.2
A table of port-specific for each port of each 52nnB-TT module i the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol52nnBTTPortEntry

ol52nnBTTPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.30.2.1
A list of port-specific information about a specific 52nnB-TT port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol52nnBTTPortEntry  

ol52nnBTTPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.1
The slot number for this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnBTTPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.2
The port number for this port within this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnBTTPortConnector 1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.3
The port connector. Notice that setting port connector available only for the front pannel port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER backPlane(1), rj45(8), db-9(10)  

ol52nnBTTPortSTAPState 1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.4
The port connector. Notice that setting port connector available only for the front pannel port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), off(6)  

ol52nnBTTPortIpAddress 1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.5
The IP address associated with this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ol52nnBTTPortMACAddress 1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.6
A 6 octet address that uniquely identifies this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

ol52nnBTTPortThroughput 1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.7
Port throughput measured in Kbytes per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

ol52nnBTTPortForwarding 1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.8
Port forwarding rate measured in frames per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

ol52nnBTTPortSRRingNo 1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.9
The port's source routing ring number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnBTTPortRingSpeed 1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.10
The ring's bandwidth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fourMegabit(1), sixteenMegabit(2)  

ol52nnBTTTrunkTable 1.3.6.1.4.1.49.2.3.1.4.4.30.3
A table that contains trunk-specific information for each trunk on each 52nnB-TT in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol52nnBTTTrunkEntry

ol52nnBTTTrunkEntry 1.3.6.1.4.1.49.2.3.1.4.4.30.3.1
A list of information about a specific Trunk on a 52nnB-TT module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol52nnBTTTrunkEntry  

ol52nnBTTTrunkSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.30.3.1.1
The slot number of this module. Its value ranges between 1 and olConcNumSlots.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnBTTTrunkIndex 1.3.6.1.4.1.49.2.3.1.4.4.30.3.1.2
The trunk number of this module. Its value ranges between 1 and olModNumTrunks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMMGTModTable 1.3.6.1.4.1.49.2.3.1.4.4.32.1
A table that contains module information about each 52nnM-MGT in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol52nnMMGTModEntry

ol52nnMMGTModEntry 1.3.6.1.4.1.49.2.3.1.4.4.32.1.1
A list of module information for each 52nnM-MGT in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol52nnMMGTModEntry  

ol52nnMMGTModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.1
The slot number of this module. Its value ranges between 1 and olConcNumSlots.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMMGTModMasterPriority 1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.2
The mastership priority of this agent. Ten is the highest and one is the lowest. Priority is only used when an election occurs. Mastership is not preemptive unless the reset mastership command is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), three(3), four(4), five(5), six(6), seven(7), eight(8), nine(9), ten(10)  

ol52nnMMGTModMasterStatus 1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.3
The mastership status of this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER master(1), non-master(2), electing(3)  

ol52nnMMGTModStationAddr 1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.4
A 6 octet address that uniquely identifies this module. The station address is the MAC address of port 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ol52nnMMGTModRingSpeed 1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.5
The ring's bandwidth.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fourMegabit(1), sixteenMegabit(2)  

ol52nnMMGTModNetworkStatus 1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.6
The status of the ring containing this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER okay(1), closed(2), beaconing(3)  

ol52nnMMGTPortTable 1.3.6.1.4.1.49.2.3.1.4.4.32.2
A table that contains port-specific information for each port on each 52nnM-MGT in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol52nnMMGTPortEntry

ol52nnMMGTPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.32.2.1
A list of information about a specific port on a 52nnM-MGT module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol52nnMMGTPortEntry  

ol52nnMMGTPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.32.2.1.1
The slot number of this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMMGTPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.32.2.1.2
The port number of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMMGTPortIpAddress 1.3.6.1.4.1.49.2.3.1.4.4.32.2.1.3
The IP address associated with this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ol52nnMMGTTrunkTable 1.3.6.1.4.1.49.2.3.1.4.4.32.3
A table that contains trunk-specific information for each trunk on each 52nnM-MGT in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol52nnMMGTTrunkEntry

ol52nnMMGTTrunkEntry 1.3.6.1.4.1.49.2.3.1.4.4.32.3.1
A list of information about a specific Trunk on a 52nnM-MGT module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol52nnMMGTTrunkEntry  

ol52nnMMGTTrunkSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.32.3.1.1
The slot number of this module. Its value ranges between 1 and olConcNumSlots.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMMGTTrunkIndex 1.3.6.1.4.1.49.2.3.1.4.4.32.3.1.2
The slot number of this module. Its value ranges between 1 and olModNumTrunks.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol52nnMMGTTrunkCableMon 1.3.6.1.4.1.49.2.3.1.4.4.32.3.1.3
The cable monitor configuration for this trunk.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), notApplicable(3)  

ol52nnMMGTTrunkNetMapState 1.3.6.1.4.1.49.2.3.1.4.4.32.3.1.4
The map state of the copper ring-in trunk. This should be set to external for ring-in trunks which connect to external hubs. The mapping logic will not operate on trunks which are set to external. This prevents incorrect mapping which can occur when a module in one hub detects the mapping signal from another hub. This attribute only applies to copper ring-in trunks.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER notApplicable(1), internal(2), external(3)  

ol52nnMMGTTrunkExtBcnRecovery 1.3.6.1.4.1.49.2.3.1.4.4.32.3.1.5
Indicates whether the trunk is connected to a segment that will perform beacon recovery. This should be set to exists(1) for trunks which connect to hubs which perform beacon recovery. This attribute is used to determine the fault domain when resolving a beaconing condition. The beacon recovery process will resolve beaconing on trunks with this attribute set to nonExists(2) before trunks with the attribute set to exists(1) are resolved. For backplane trunks, setting to a value other than notApplicable will return invalidData error. The default value is nonExists(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER exists(1), nonExists(2), notApplicable(3)  

ol51nnIxModTable 1.3.6.1.4.1.49.2.3.1.4.4.31.1
A table of module-specific information for each 51nnI-x module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnIxModEntry

ol51nnIxModEntry 1.3.6.1.4.1.49.2.3.1.4.4.31.1.1
A list of module-specific information about a specific 51nnI-x module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnIxModEntry  

ol51nnIxModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.31.1.1.1
The slot number of this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnIxModSwType 1.3.6.1.4.1.49.2.3.1.4.4.31.1.1.2
The software currently loaded and executing has the module operating as a Bridge, Switch or Router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bridge(1), switch(2), router(3)  

ol51nnIxModStationAddr 1.3.6.1.4.1.49.2.3.1.4.4.31.1.1.3
A 6 octet address that uniquely identifies this module. The station address is the mac address of port 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

ol51nnIxModDipPromDefaults 1.3.6.1.4.1.49.2.3.1.4.4.31.1.1.4
The current module configuration with respect to default PROM values as specified by dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

ol51nnIxModProtocols 1.3.6.1.4.1.49.2.3.1.4.4.31.1.1.5
A textual description of the protocols supported by this module
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ol51nnIxPortTable 1.3.6.1.4.1.49.2.3.1.4.4.31.2
A table of port-specific information for each port of each 51nnI-x module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol51nnIxPortEntry

ol51nnIxPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.31.2.1
A list of port-specific information about a specific 51nnI-x port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol51nnIxPortEntry  

ol51nnIxPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.1
The slot number for this port's module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnIxPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.2
The port number for this port within this slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol51nnIxPortDipAdminState 1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.3
The state of this port as indicated by the port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol51nnIxPortSTAPState 1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.4
The current IEEE 802.1d Spanning Tree Algorithm and Protocol state (STAP) of this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), off(6), unknown(7)  

ol51nnIxPortIpAddress 1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.5
The IP Address associated with this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

ol51nnIxPortDipNetwork 1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.6
The network for this port as specified by this port's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), front-panel(5), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol51nnIxPortDefNetwork 1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.7
The network for this port as specified by the OEIM's non-volatile storage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), front-panel(5), ethernet-1(6), ethernet-2(7), ethernet-3(8)  

ol53nnMMGTModTable 1.3.6.1.4.1.49.2.3.1.4.4.25.1
A list of module attributes that apply to this model. To access an ol53nnMMGTModTable entry, the ol53nnMMGTModSlotIndex attribute is used.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol53nnMMGTModEntry

ol53nnMMGTModEntry 1.3.6.1.4.1.49.2.3.1.4.4.25.1.1
A list of module-specific information about a specific 53nnM-MGT module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol53nnMMGTModEntry  

ol53nnMMGTModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olModSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMMGTModMasterPriority 1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.2
The mastership priority of this agent. Ten is the highest and one is the lowest. Priority is only used when an election occurs. Mastership is not preemptive unless the reset mastership command is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), three(3), four(4), five(5), six(6), seven(7), eight(8), nine(9), ten(10)  

ol53nnMMGTModMasterStatus 1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.3
The mastership status of this agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER master(1), non-master(2), electing(3)  

ol53nnMMGTModStationAddr 1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.4
A 6 octet address that uniquely identifies this module. The station address is the MAC address of port 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

ol53nnMMGTModIpAddress 1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.5
The IP address associated with this module.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ol53nnMMGTModDownStreamMAC 1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.6
Down stream MAC
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

ol53nnMMGTModUpStreamMAC 1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.7
Up stream MAC
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

ol53nnMMGTModfddiMACPath 1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.8
The FDDI path which should be inserted into the MAC
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER primary(1), secondary(2)  

ol53nnMMGTModDownStreamModule 1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.9
Down stream slot (transmit to)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

ol53nnMMGTModUpStreamModule 1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.10
Up stream slot (receve from)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

ol53nnMMGTModDownStreamOperPath 1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.11
Transmit DBA (debug only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), fddi-path-1(24), fddi-path-2(25), fddi-path-3(26), fddi-path-4(27), fddi-path-5(28), fddi-path-6(29), fddi-path-7(30), fddi-path-8(31)  

ol53nnMMGTModUpStreamOperPath 1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.12
Receive DBA (debug only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER isolated(2), fddi-path-1(24), fddi-path-2(25), fddi-path-3(26), fddi-path-4(27), fddi-path-5(28), fddi-path-6(29), fddi-path-7(30), fddi-path-8(31)  

ol53nnMMGTModRingInfo 1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.13
An array which is indexed by DBA number. Each element contains the slot number (1..16) which is assigned to transmit on this DBA. (debug only)
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..8)  

ol53nnMMGTPortTable 1.3.6.1.4.1.49.2.3.1.4.4.25.2
A table of port-specific information for each port of this module type.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol53nnMMGTPortEntry

ol53nnMMGTPortEntry 1.3.6.1.4.1.49.2.3.1.4.4.25.2.1
A list of module-specific information about a specific 53nnM-MGT port in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol53nnMMGTPortEntry  

ol53nnMMGTPortSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olPortSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMMGTPortIndex 1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.2
A unique value that identifies a particular port within this module. Its value ranges between 1 and olModPortNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olPortIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMMGTPortConfig 1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.3
Specifies the FDDI port type (a or b).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER a(1), b(2)  

ol53nnMMGTPortPcmState 1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.4
(refer to ANSI SMT 9.6.2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pc0(1), pc1(2), pc2(3), pc3(4), pc4(5), pc5(6), pc6(7), pc7(8), pc8(9), pc9(10)  

ol53nnMMGTPortConnectState 1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.5
An indication of the connect state of this PORT. Basically, this gives a higher level view of the state of the connection by grouping PCM states and the PC-Withhold flag state. The supported values and their corresponding PCM states and PC-Withhold condition, when relevant, are: disabled: (PC0:Off, PC9:Maint) connecting: (PC1(Break) || PC3 (Connect) || PC4(next) || PC5 (Signal) || PC6(Join) || PC7 (Verify)) && (PC_Withhold = None) standby: (PC_Withhold != None) active: (PC2:Trace || PC8:Active)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), connecting(2), standby(3), active(4)  

ol53nnMMGTPortNeighbor 1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.6
The type (PC_Neighbor) of the remote PORT that is determined in PC_Signaling in R_Val (1,2) (refer to ANSI SMT 9.6.3.2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER a(1), b(2), slave(3), master(4), unknown(5)  

ol53nnMMGTPortRemoteMACIndicated 1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.7
The indication, in PC-Signaling that the remote partner intends to place a MAC in the output token PATH of this PORT. Signaled as R_Val (9) (refer to ANSI SMT 9.6.3.2).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

ol53nnMMGTPortBSFlag 1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.8
The Break State, BS_Flag (refer to ANSI SMT 9.4.3.4).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

ol53nnMMGTPortPCWithhold 1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.9
PC_Withhold, (refer to ANSI SMT 9.4.1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), m-m(2), other(3)  

ol53nnMMGTPortLerCondition 1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.10
This variable is set to true whenever LerEstimate is less than or equal to LerAlarm (the larger the number the smaller the value).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bad(1), okay(2)  

ol53nnMMGTTrunkTable 1.3.6.1.4.1.49.2.3.1.4.4.25.3
FDDI module specific trunk table variables. At present there are none.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol53nnMMGTTrunkEntry

ol53nnMMGTTrunkEntry 1.3.6.1.4.1.49.2.3.1.4.4.25.3.1
A description of 53nnM-MGT trunk attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol53nnMMGTTrunkEntry  

ol53nnMMGTTrunkSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.25.3.1.1
A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olTrunkSlotIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol53nnMMGTTrunkIndex 1.3.6.1.4.1.49.2.3.1.4.4.25.3.1.2
A unique value that identifies a particular trunk within this module. Its value ranges between 1 and olModTrunkNumber. The module identified by a particular value of this index is the same module as indentified by the same value of olTrunkIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol50nnMHCTLModTable 1.3.6.1.4.1.49.2.3.1.4.4.33.1
A table that contains information about each 50nnM-HCTL in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ol50nnMHCTLModEntry

ol50nnMHCTLModEntry 1.3.6.1.4.1.49.2.3.1.4.4.33.1.1
A list of information for each 50nnM-HCTL module in the concentrator.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Ol50nnMHCTLModEntry  

ol50nnMHCTLModSlotIndex 1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.1
The slot number for this module. The value should be 7.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

ol50nnMHCTLModOperState 1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.2
The operational state of the 50nnM-HCTL module. Specifically, this is an indicator of whether the 50nnM-HCTL module is providing clock signals to the backplane. An active 50nnM-HCTL module provides clock signals to the backplane while a standby 50nnM-HCTL module does not. Note that only one 50nnM-HCTL module will be active at any given time; all other 50nnM-HCTL/ 50nnMRCTL modules in the concentrator will be in standby mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), standby(2)  

ol50nnMHCTLModClockStatus 1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.3
The current status of the on-board clocks on this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER okay(1), faulty(2)  

ol50nnMHCTLModTempStatus 1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.4
The temperature as detected by the probe on this module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER okay(1), extremeTemp(2)  

ol50nnMHCTLModPDBStatus 1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.5
Indicates whether this 6-slot concentrator contains a power distribution board that supports powersupply redundancy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER present(1), notPresent(2)  

ol50nnMHCTLModDipCh1ActCol 1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.6
The Ethernet channel 1 activity/collision LED configuration as indicated by this module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol50nnMHCTLModDipCh2ActCol 1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.7
The Ethernet channel 2 activity/collision LED configuration as indicated by this module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ol50nnMHCTLModDipCh3ActCol 1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.8
The Ethernet channel 3 activity/collision LED configuration as indicated by this module's dip switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)