CIENA-CES-DHCPV6-CLIENT-MIB

File: CIENA-CES-DHCPV6-CLIENT-MIB.mib (76296 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC INET-ADDRESS-MIB
CIENA-TC CIENA-SMI

Imported symbols

Integer32 Counter32 Gauge32
OBJECT-TYPE MODULE-IDENTITY Unsigned32
DisplayString RowStatus InetAddressType
InetAddress CienaGlobalState CienaStatsClear
cienaCesConfig cienaCesNotifications

Defined Types

CienaCesDhcpv6ClientOptionEntry  
SEQUENCE    
  cienaCesDhcpv6OptionCodeIndex Integer32
  cienaCesDhcpv6OptionDesc DisplayString
  cienaCesDhcpv6OptionCode Integer32
  cienaCesDhcpv6OptionState CienaGlobalState

CienaCesDhcpv6ClientSessEntry  
SEQUENCE    
  cienaCesDhcpv6ClientSessMgmtIntfIndex Integer32
  cienaCesDhcpv6ClientSessState INTEGER
  cienaCesDhcpv6ClientSessAutoConfigState INTEGER
  cienaCesDhcpv6ClientSessUpTime Integer32
  cienaCesDhcpv6ClientSessPrefLifetime Integer32
  cienaCesDhcpv6ClientSessValidLifetime Integer32
  cienaCesDhcpv6ClientSessLeaseExpire Integer32
  cienaCesDhcpv6ClientSessClientId DisplayString
  cienaCesDhcpv6ClientSessServerIpAddrType InetAddressType
  cienaCesDhcpv6ClientSessServerIpAddr InetAddress
  cienaCesDhcpv6ClientSessServerId DisplayString
  cienaCesDhcpv6ClientSessT1Time Integer32
  cienaCesDhcpv6ClientSessT2Time Integer32

CienaCesDhcpv6ClientSessStatsEntry  
SEQUENCE    
  cienaCesDhcpv6ClientSessStatsMgmtIntfIndex Integer32
  cienaCesDhcpv6ClientSessStatsClear CienaStatsClear
  cienaCesDhcpv6ClientSessStatsPktsRx Gauge32
  cienaCesDhcpv6ClientSessStatsReply Gauge32
  cienaCesDhcpv6ClientSessStatsAdvert Gauge32
  cienaCesDhcpv6ClientSessStatsRecfg Gauge32
  cienaCesDhcpv6ClientSessStatsInvalid Gauge32
  cienaCesDhcpv6ClientSessStatsPktsTx Gauge32
  cienaCesDhcpv6ClientSessStatsSolicit Gauge32
  cienaCesDhcpv6ClientSessStatsRequest Gauge32
  cienaCesDhcpv6ClientSessStatsConfirm Gauge32
  cienaCesDhcpv6ClientSessStatsRenew Gauge32
  cienaCesDhcpv6ClientSessStatsRebind Gauge32
  cienaCesDhcpv6ClientSessStatsInfoReq Gauge32
  cienaCesDhcpv6ClientSessStatsRelease Gauge32
  cienaCesDhcpv6ClientSessStatsDecline Gauge32
  cienaCesDhcpv6ClientSessStatsTxFail Gauge32

CienaCesDhcpV6LdraStateEntry  
SEQUENCE    
  cienaCesDhcpv6LdraVlan Integer32
  cienaCesDhcpv6LdraAdminState CienaGlobalState
  cienaCesDhcpv6LdraOperState CienaGlobalState
  cienaCesDhcpv6LdraRowStatus RowStatus

CienaCesDhcpV6LdraTrustEntry  
SEQUENCE    
  cienaCesDhcpv6LdraPort Integer32
  cienaCesDhcpv6LdraTrustMode INTEGER

CienaCesDhcpV6LdraStatsEntry  
SEQUENCE    
  cienaCesDhcpv6LdraPktsForRelay Counter32
  cienaCesDhcpv6LdraRelayedClient Counter32
  cienaCesDhcpv6LdraRelayedServer Counter32
  cienaCesDhcpv6LdraUntrustedClientPortPktsRx Counter32
  cienaCesDhcpv6LdraUntrustedServerPortPktsRx Counter32
  cienaCesDhcpv6LdraFailedValidationPktDrop Counter32
  cienaCesDhcpv6LdraInvalidConfigPktDrop Counter32
  cienaCesDhcpv6LdraExceededHopCountPktDrop Counter32
  cienaCesDhcpv6LdraExceedMTUPktDrop Counter32
  cienaCesDhcpv6LdraNoTrustedServerPktDrop Counter32
  cienaCesDhcpv6LdraNoTrustedClientPktDrop Counter32
  cienaCesDhcpv6LdraIPv6FragBadExtHdrPktDrop Counter32
  cienaCesDhcpv6LdraGeneralErrors Counter32
  cienaCesDhcpv6LdraStatsClear CienaStatsClear

CienaCesDhcpV6LdraIntidStringEntry  
SEQUENCE    
  cienaCesDhcpv6LdraIntidStringPort Integer32
  cienaCesDhcpv6LdraIntidString DisplayString
  cienaCesDhcpv6LdraIntidStringRowStatus RowStatus

CienaCesDhcpV6LdraRidStringEntry  
SEQUENCE    
  cienaCesDhcpv6LdraRidStringPort Integer32
  cienaCesDhcpv6LdraRidString DisplayString
  cienaCesDhcpv6LdraRidStringRowStatus RowStatus

CienaCesDhcpV6LdraExtTrustEntry  
SEQUENCE    
  cienaCesDhcpv6LdraExtPortState INTEGER
  cienaCesDhcpv6LdraExtTrustMode INTEGER

CienaCesDhcpV6LdraVsStateEntry  
SEQUENCE    
  cienaCesDhcpv6LdraVsVlan Integer32
  cienaCesDhcpv6LdraVsName DisplayString
  cienaCesDhcpv6LdraVsAdminState CienaGlobalState
  cienaCesDhcpv6LdraVsOperState CienaGlobalState
  cienaCesDhcpv6LdraVsRowStatus RowStatus

CienaCesDhcpV6LdraVsTrustEntry  
SEQUENCE    
  cienaCesDhcpv6LdraVsPort Integer32
  cienaCesDhcpv6LdraVsSubVlan Integer32
  cienaCesDhcpv6LdraVsPortState INTEGER
  cienaCesDhcpv6LdraVsTrustMode INTEGER

CienaCesDhcpV6LdraVsStatsEntry  
SEQUENCE    
  cienaCesDhcpv6LdraVsPktsForRelay Counter32
  cienaCesDhcpv6LdraVsRelayedClient Counter32
  cienaCesDhcpv6LdraVsRelayedServer Counter32
  cienaCesDhcpv6LdraVsUntrustedClientPortPktsRx Counter32
  cienaCesDhcpv6LdraVsUntrustedServerPortPktsRx Counter32
  cienaCesDhcpv6LdraVsFailedValidationPktDrop Counter32
  cienaCesDhcpv6LdraVsInvalidConfigPktDrop Counter32
  cienaCesDhcpv6LdraVsExceededHopCountPktDrop Counter32
  cienaCesDhcpv6LdraVsExceedMTUPktDrop Counter32
  cienaCesDhcpv6LdraVsNoTrustedServerPktDrop Counter32
  cienaCesDhcpv6LdraVsNoTrustedClientPktDrop Counter32
  cienaCesDhcpv6LdraVsIPv6FragBadExtHdrPktDrop Counter32
  cienaCesDhcpv6LdraVsGeneralErrors Counter32
  cienaCesDhcpv6LdraVsStatsClear CienaStatsClear

CienaCesDhcpV6LdraVsIntidStringEntry  
SEQUENCE    
  cienaCesDhcpv6LdraVsIntidString DisplayString
  cienaCesDhcpv6LdraVsIntidStringRowStatus RowStatus

CienaCesDhcpV6LdraVsRidStringEntry  
SEQUENCE    
  cienaCesDhcpv6LdraVsRidString DisplayString
  cienaCesDhcpv6LdraVsRidStringRowStatus RowStatus

CienaCesDhcpV6LdraMplsStateEntry  
SEQUENCE    
  cienaCesDhcpv6LdraMplsId Unsigned32
  cienaCesDhcpv6LdraMplsName DisplayString
  cienaCesDhcpv6LdraMplsAdminState CienaGlobalState
  cienaCesDhcpv6LdraMplsOperState CienaGlobalState
  cienaCesDhcpv6LdraMplsRowStatus RowStatus

CienaCesDhcpV6LdraMplsTrustEntry  
SEQUENCE    
  cienaCesDhcpv6LdraMplsInterface Unsigned32
  cienaCesDhcpv6LdraMplsVcName DisplayString
  cienaCesDhcpv6LdraMplsInterfaceState INTEGER
  cienaCesDhcpv6LdraMplsTrustMode INTEGER

CienaCesDhcpV6LdraMplsStatsEntry  
SEQUENCE    
  cienaCesDhcpv6LdraMplsPktsForRelay Counter32
  cienaCesDhcpv6LdraMplsRelayedClient Counter32
  cienaCesDhcpv6LdraMplsRelayedServer Counter32
  cienaCesDhcpv6LdraMplsUntrustedClientInterfacePktsRx Counter32
  cienaCesDhcpv6LdraMplsUntrustedServerInterfacePktsRx Counter32
  cienaCesDhcpv6LdraMplsFailedValidationPktDrop Counter32
  cienaCesDhcpv6LdraMplsInvalidConfigPktDrop Counter32
  cienaCesDhcpv6LdraMplsExceededHopCountPktDrop Counter32
  cienaCesDhcpv6LdraMplsExceedMTUPktDrop Counter32
  cienaCesDhcpv6LdraMplsNoTrustedServerPktDrop Counter32
  cienaCesDhcpv6LdraMplsNoTrustedClientPktDrop Counter32
  cienaCesDhcpv6LdraMplsIPv6FragBadExtHdrPktDrop Counter32
  cienaCesDhcpv6LdraMplsGeneralErrors Counter32
  cienaCesDhcpv6LdraMplsStatsClear CienaStatsClear

CienaCesDhcpV6LdraMplsIntidStringEntry  
SEQUENCE    
  cienaCesDhcpv6LdraMplsIntidString DisplayString
  cienaCesDhcpv6LdraMplsIntidStringRowStatus RowStatus

CienaCesDhcpV6LdraMplsRidStringEntry  
SEQUENCE    
  cienaCesDhcpv6LdraMplsRidString DisplayString
  cienaCesDhcpv6LdraMplsRidStringRowStatus RowStatus

Defined Values

cienaCesDhcpv6ClientMIB 1.3.6.1.4.1.1271.2.1.30
The MIB module to manage DHCPv6 client on Ciena CES products.
MODULE-IDENTITY    

cienaCesDhcpv6ClientMIBObjects 1.3.6.1.4.1.1271.2.1.30.1
OBJECT IDENTIFIER    

cienaCesDhcpv6Client 1.3.6.1.4.1.1271.2.1.30.1.1
OBJECT IDENTIFIER    

cienaCesDhcpv6RelayAgent 1.3.6.1.4.1.1271.2.1.30.1.2
OBJECT IDENTIFIER    

cienaCesDhcpv6RelayAgentGlobalAttrs 1.3.6.1.4.1.1271.2.1.30.1.2.1
OBJECT IDENTIFIER    

cienaCesDhcpv6ClientMIBNotificationPrefix 1.3.6.1.4.1.1271.2.2.30
OBJECT IDENTIFIER    

cienaCesDhcpv6ClientMIBNotifications 1.3.6.1.4.1.1271.2.2.30.0
OBJECT IDENTIFIER    

cienaCesDhcpv6ClientMIBConformance 1.3.6.1.4.1.1271.2.1.30.2
OBJECT IDENTIFIER    

cienaCesDhcpv6ClientMIBCompliances 1.3.6.1.4.1.1271.2.1.30.2.1
OBJECT IDENTIFIER    

cienaCesDhcpv6ClientMIBGroups 1.3.6.1.4.1.1271.2.1.30.2.2
OBJECT IDENTIFIER    

cienaCesDhcpv6AdminState 1.3.6.1.4.1.1271.2.1.30.1.1.1
This object indicates if the DHCPv6 client is administratively enabled.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesDhcpv6IfName 1.3.6.1.4.1.1271.2.1.30.1.1.2
The interface associated with the DHCPV6 client.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

cienaCesDhcpv6RapidCommitState 1.3.6.1.4.1.1271.2.1.30.1.1.3
This object indicates if rapid commit option is enabled on the DHCPv6 client.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesDhcpv6PrefLifetimeReq 1.3.6.1.4.1.1271.2.1.30.1.1.5
The requested preferred lifetime for the IPv6 address expressed in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

cienaCesDhcpv6ValidLifetimeReq 1.3.6.1.4.1.1271.2.1.30.1.1.6
The requested valid lifetime for the IPv6 address expressed in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

cienaCesDhcpv6ClientOptionTable 1.3.6.1.4.1.1271.2.1.30.1.1.7
List of options supported by the DHCPv6 client.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpv6ClientOptionEntry

cienaCesDhcpv6ClientOptionEntry 1.3.6.1.4.1.1271.2.1.30.1.1.7.1
An entry containing list of options supported by DHCPv6 client.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpv6ClientOptionEntry  

cienaCesDhcpv6OptionCodeIndex 1.3.6.1.4.1.1271.2.1.30.1.1.7.1.1
Specifies the index used for this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

cienaCesDhcpv6OptionDesc 1.3.6.1.4.1.1271.2.1.30.1.1.7.1.2
Specifies the description for the given DHCPv6 option code.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesDhcpv6OptionCode 1.3.6.1.4.1.1271.2.1.30.1.1.7.1.3
Specifies the option code specified by RFC specification.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

cienaCesDhcpv6OptionState 1.3.6.1.4.1.1271.2.1.30.1.1.7.1.4
Specifies if the given option is enabled/disabled.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesDhcpv6ClientSessTable 1.3.6.1.4.1.1271.2.1.30.1.1.8
List of active DHCPv6 client sessions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpv6ClientSessEntry

cienaCesDhcpv6ClientSessEntry 1.3.6.1.4.1.1271.2.1.30.1.1.8.1
An entry in the cienaCesDhcpv6ClientSessTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpv6ClientSessEntry  

cienaCesDhcpv6ClientSessMgmtIntfIndex 1.3.6.1.4.1.1271.2.1.30.1.1.8.1.1
The mgmt interface index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

cienaCesDhcpv6ClientSessState 1.3.6.1.4.1.1271.2.1.30.1.1.8.1.2
The DHCPv6 client state of this session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), init(2), bound(3), renewing(4), rebinding(5), solicit(6), request(7), reconfigure(8), unknown(99)  

cienaCesDhcpv6ClientSessAutoConfigState 1.3.6.1.4.1.1271.2.1.30.1.1.8.1.3
The DHCPv6 autoconfiguration state of this session set by the router advertisement.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), stateless(2), stateful(3), unknown(99)  

cienaCesDhcpv6ClientSessUpTime 1.3.6.1.4.1.1271.2.1.30.1.1.8.1.4
The total length of time that this session has had active lease(s).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cienaCesDhcpv6ClientSessPrefLifetime 1.3.6.1.4.1.1271.2.1.30.1.1.8.1.5
The preferred lifetime in seconds of the current lease.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cienaCesDhcpv6ClientSessValidLifetime 1.3.6.1.4.1.1271.2.1.30.1.1.8.1.6
The valid lifetime in seconds of the current lease.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cienaCesDhcpv6ClientSessLeaseExpire 1.3.6.1.4.1.1271.2.1.30.1.1.8.1.7
The remaining seconds until the current lease expires.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cienaCesDhcpv6ClientSessClientId 1.3.6.1.4.1.1271.2.1.30.1.1.8.1.8
The full 'client ID' value associated with this lease.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesDhcpv6ClientSessServerIpAddrType 1.3.6.1.4.1.1271.2.1.30.1.1.8.1.9
The IP address type (IPv6) of the server from which this lease was obtained.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

cienaCesDhcpv6ClientSessServerIpAddr 1.3.6.1.4.1.1271.2.1.30.1.1.8.1.10
The IP address of the server from which this lease was obtained.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

cienaCesDhcpv6ClientSessServerId 1.3.6.1.4.1.1271.2.1.30.1.1.8.1.11
The full 'server ID' value associated with this lease.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesDhcpv6ClientSessT1Time 1.3.6.1.4.1.1271.2.1.30.1.1.8.1.12
The lease renewal (T1) time in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cienaCesDhcpv6ClientSessT2Time 1.3.6.1.4.1.1271.2.1.30.1.1.8.1.13
The lease rebind (T2) time in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cienaCesDhcpv6ClientSessStatsTable 1.3.6.1.4.1.1271.2.1.30.1.1.9
The (conceptual) table listing the statistics for DHCPv6 per interface
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpv6ClientSessStatsEntry

cienaCesDhcpv6ClientSessStatsEntry 1.3.6.1.4.1.1271.2.1.30.1.1.9.1
An entry (conceptual row) in the cienaCesDhcpv6ClientSessStatsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpv6ClientSessStatsEntry  

cienaCesDhcpv6ClientSessStatsMgmtIntfIndex 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.1
The mgmt interface index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

cienaCesDhcpv6ClientSessStatsClear 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.2
This object clears the DHCPv6 session statistics.
Status: current Access: read-write
OBJECT-TYPE    
  CienaStatsClear  

cienaCesDhcpv6ClientSessStatsPktsRx 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.3
The number of DHCPv6 packets received by the client.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesDhcpv6ClientSessStatsReply 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.4
The number of DHCPv6 reply messages received by the client.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesDhcpv6ClientSessStatsAdvert 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.5
The number of DHCPv6 advertise messages received by the client.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesDhcpv6ClientSessStatsRecfg 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.6
The number of DHCPv6 reconfigure messages received by the client.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesDhcpv6ClientSessStatsInvalid 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.7
The number of DHCPv6 invalid messages received by the client.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesDhcpv6ClientSessStatsPktsTx 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.8
The number of DHCPv6 messages sent by the client.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesDhcpv6ClientSessStatsSolicit 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.9
The number of DHCPv6 solicit messages sent by the client.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesDhcpv6ClientSessStatsRequest 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.10
The number of DHCPv6 request messages sent by the client.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesDhcpv6ClientSessStatsConfirm 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.11
The number of DHCPv6 confirm messages sent by the client.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesDhcpv6ClientSessStatsRenew 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.12
The number of DHCPv6 renew messages sent by the client.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesDhcpv6ClientSessStatsRebind 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.13
The number of DHCPv6 rebind messages sent by the client.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesDhcpv6ClientSessStatsInfoReq 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.14
The number of DHCPv6 information request messages sent by the client.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesDhcpv6ClientSessStatsRelease 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.15
The number of DHCPv6 release messages sent by the client.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesDhcpv6ClientSessStatsDecline 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.16
The number of DHCPv6 decline messages sent by the client.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesDhcpv6ClientSessStatsTxFail 1.3.6.1.4.1.1271.2.1.30.1.1.9.1.17
The number of DHCPv6 messages the client was unable to send.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cienaCesDhcpv6LdraState 1.3.6.1.4.1.1271.2.1.30.1.2.1.1
Specifies the global state of the Lightweight DHCPv6 Relay Agent.
Status: current Access: read-write
OBJECT-TYPE    
  CienaGlobalState  

cienaCesDhcpv6LdraInterfaceId 1.3.6.1.4.1.1271.2.1.30.1.2.1.2
Specifies the type of data to use in the InterfaceID option of LDRA messages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER slotAndPort(1), slotAndPortAndVlan(2), intidString(3)  

cienaCesDhcpv6LdraRemoteId 1.3.6.1.4.1.1271.2.1.30.1.2.1.3
Specifies the type of data to use in the RemoteID option of LDRA messages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER macAddress(1), hostName(2), ridString(3)  

cienaCesDhcpv6LdraRemoteIdOption 1.3.6.1.4.1.1271.2.1.30.1.2.1.4
If on, the RemoteID option will be added to client messages being relayed by LDRA.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesDhcpv6LdraRemoteIdEnterpriseNo 1.3.6.1.4.1.1271.2.1.30.1.2.1.5
If the RemoteID option is on, this value will be used as the Enterprise Number in the RemoteID option field. Uses Broadband Forum value 3561 as default
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4294967295  

cienaCesDhcpv6LdraForward 1.3.6.1.4.1.1271.2.1.30.1.2.1.6
This object specifies the number of DHCPv6 packets forwarded rather than relayed. These are valid DHCPv6 frames that don't have a defined relay.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraRelayed 1.3.6.1.4.1.1271.2.1.30.1.2.1.7
This object specifies the number of DHCPv6 packets processed by the LDRA and not dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraDropped 1.3.6.1.4.1.1271.2.1.30.1.2.1.8
This object specifies the number of DHCPv6 packets processed by the LDRA and dropped. Inspect the detailed statistics on each relay for more details related to dropped packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraGlobalStatsClear 1.3.6.1.4.1.1271.2.1.30.1.2.1.9
This object when set to 'clear(1)', clears the global DHCPv6 LDRA stats.
Status: current Access: read-write
OBJECT-TYPE    
  CienaStatsClear  

cienaCesDhcpv6LdraNotForRelay 1.3.6.1.4.1.1271.2.1.30.1.2.1.10
This object specifies the number of DHCPv6 packets passed to the relay, but were determined to not belong to the relay. The packets are dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraStateTable 1.3.6.1.4.1.1271.2.1.30.1.2.2
Table allows changing configuration of DHCPv6 LDRA functionality for each cienaCesDhcpv6LdraVlan.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraStateEntry

cienaCesDhcpv6LdraStateEntry 1.3.6.1.4.1.1271.2.1.30.1.2.2.1
Entry in the table to configure DHCPv6 LDRA functionality.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraStateEntry  

cienaCesDhcpv6LdraVlan 1.3.6.1.4.1.1271.2.1.30.1.2.2.1.1
This object specifies the VLAN on which DHCPv6 LDRA is configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..24576  

cienaCesDhcpv6LdraAdminState 1.3.6.1.4.1.1271.2.1.30.1.2.2.1.2
This object allows the user to disable or enable DHCPv6 LDRA functionality on the given VLAN specified by cienaCesDhcpv6LdraVlan.
Status: current Access: read-create
OBJECT-TYPE    
  CienaGlobalState  

cienaCesDhcpv6LdraOperState 1.3.6.1.4.1.1271.2.1.30.1.2.2.1.3
This object shows the operational status of the DHCPv6 LDRA on given VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesDhcpv6LdraRowStatus 1.3.6.1.4.1.1271.2.1.30.1.2.2.1.4
Set this object to 'Destroy' to terminate DHCPv6 LDRA Relaying on the VLAN specified by cienaCesDhcpv6LdraVlan. Set this object to 'CreateAndGo' to enable DHCPv6 LDRA Relaying on the VLAN specified by cienaCesDhcpv6LdraVlan.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cienaCesDhcpv6LdraTrustTable 1.3.6.1.4.1.1271.2.1.30.1.2.3
This table is used to specify the slot / ports and VLANs that the DHCPv6 LDRA can trust. This table has been deprecated in favor of the cienaCesDhcpv6LdraExtTrustTable which adds a column for port status.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraTrustEntry

cienaCesDhcpv6LdraTrustEntry 1.3.6.1.4.1.1271.2.1.30.1.2.3.1
Each entry in this table is used to specify the slot / port and VLAN to be trusted.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraTrustEntry  

cienaCesDhcpv6LdraPort 1.3.6.1.4.1.1271.2.1.30.1.2.3.1.1
This object is used as an index in the table and is used to specify the port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

cienaCesDhcpv6LdraTrustMode 1.3.6.1.4.1.1271.2.1.30.1.2.3.1.2
This object is used to set the port as client trusted, server trusted or not trusted. Note that the client(1) mode is deprecated. That value will never be returned. Setting that value will set the mode to clientTrust(2) instead.
Status: deprecated Access: read-create
OBJECT-TYPE    
  INTEGER client(1), clientTrust(2), serverTrust(3), dualRoleTrust(4), unTrust(5)  

cienaCesDhcpv6LdraStatsTable 1.3.6.1.4.1.1271.2.1.30.1.2.4
Table to display L2 statistics for each cienaCesDhcpv6LdraVlan.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraStatsEntry

cienaCesDhcpv6LdraStatsEntry 1.3.6.1.4.1.1271.2.1.30.1.2.4.1
Entry in the table to display LDRA stats.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraStatsEntry  

cienaCesDhcpv6LdraPktsForRelay 1.3.6.1.4.1.1271.2.1.30.1.2.4.1.1
This object specifies the number of packets sent to this relay process.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraRelayedClient 1.3.6.1.4.1.1271.2.1.30.1.2.4.1.2
This object specifies the number of client sourced DHCPv6 packets relayed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraRelayedServer 1.3.6.1.4.1.1271.2.1.30.1.2.4.1.3
This object specifies the number of server sourced DHCPv6 packets relayed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraUntrustedClientPortPktsRx 1.3.6.1.4.1.1271.2.1.30.1.2.4.1.4
This object specifies the number of client DHCPv6 packets dropped because they were received on untrusted client ports.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraUntrustedServerPortPktsRx 1.3.6.1.4.1.1271.2.1.30.1.2.4.1.5
This object specifies the number of server DHCPv6 packets dropped because they were received on untrusted server ports.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraFailedValidationPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.4.1.6
This object specifies the number of DHCPv6 packets dropped due to failed validation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraInvalidConfigPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.4.1.7
This object specifies the number of DHCPv6 packets dropped due to LDRA configuration issues.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraExceededHopCountPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.4.1.8
This object specifies the number of DHCPv6 packets dropped due to hop count in the packet exceeding hop count the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraExceedMTUPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.4.1.9
This object specifies the number of DHCPv6 packets dropped because the new relay frame size would exceed the MTU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraNoTrustedServerPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.4.1.10
This object specifies the number of DHCPv6 packets dropped because there are no server trusted ports configured.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraNoTrustedClientPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.4.1.11
This object specifies the number of DHCPv6 packets dropped because there are no client trusted ports configured.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraIPv6FragBadExtHdrPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.4.1.12
This object specifies the number of DHCPv6 packets dropped due to IPv6 packet extension headers that could not be processed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraGeneralErrors 1.3.6.1.4.1.1271.2.1.30.1.2.4.1.13
This object specifies the number of DHCPv6 packets dropped due to unclassified errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraStatsClear 1.3.6.1.4.1.1271.2.1.30.1.2.4.1.14
This object when set to 'true', clears DHCPv6 LDRA stats for given VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  CienaStatsClear  

cienaCesDhcpv6LdraIntidStringTable 1.3.6.1.4.1.1271.2.1.30.1.2.5
This table is used to specify CID strings for slot / ports and VLANs that the DHCP relay agent can specify in Option 82 CID information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraIntidStringEntry

cienaCesDhcpv6LdraIntidStringEntry 1.3.6.1.4.1.1271.2.1.30.1.2.5.1
Each entry in this table is used to specify an interface id string for slot / port and VLAN combinations.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraIntidStringEntry  

cienaCesDhcpv6LdraIntidStringPort 1.3.6.1.4.1.1271.2.1.30.1.2.5.1.1
This object is used as an index in the table and is used to specify the port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

cienaCesDhcpv6LdraIntidString 1.3.6.1.4.1.1271.2.1.30.1.2.5.1.2
This object is used to get and set the IntID string for the port.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..64)  

cienaCesDhcpv6LdraIntidStringRowStatus 1.3.6.1.4.1.1271.2.1.30.1.2.5.1.3
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table set this object to 'createAndGo'. To delete a row in this table set this object to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cienaCesDhcpv6LdraRidStringTable 1.3.6.1.4.1.1271.2.1.30.1.2.6
This table is used to specify RID strings for slot / ports and VLANs that the DHCP relay agent can specify in Option 82 RID information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraRidStringEntry

cienaCesDhcpv6LdraRidStringEntry 1.3.6.1.4.1.1271.2.1.30.1.2.6.1
Each entry in this table is used to specify an RID string for slot / port and VLAN combinations.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraRidStringEntry  

cienaCesDhcpv6LdraRidStringPort 1.3.6.1.4.1.1271.2.1.30.1.2.6.1.1
This MIB object is used as an index in the table and is used to specify the port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

cienaCesDhcpv6LdraRidString 1.3.6.1.4.1.1271.2.1.30.1.2.6.1.2
This MIB object is used to get and set the RID string for the port.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..64)  

cienaCesDhcpv6LdraRidStringRowStatus 1.3.6.1.4.1.1271.2.1.30.1.2.6.1.3
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table set this object to 'createAndGo'. To delete a row in this table set this object to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cienaCesDhcpv6LdraExtTrustTable 1.3.6.1.4.1.1271.2.1.30.1.2.7
This table is used to specify the ports and VLANs that the DHCPv6 LDRA can trust. This table is the same as cienaCesDhcpv6LdraTrustTable with the addition of a column for the port status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraExtTrustEntry

cienaCesDhcpv6LdraExtTrustEntry 1.3.6.1.4.1.1271.2.1.30.1.2.7.1
Each entry in this table is used to specify the port and VLAN to be trusted.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraExtTrustEntry  

cienaCesDhcpv6LdraExtPortState 1.3.6.1.4.1.1271.2.1.30.1.2.7.1.1
This object reports whether the specified port is active or inactive.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

cienaCesDhcpv6LdraExtTrustMode 1.3.6.1.4.1.1271.2.1.30.1.2.7.1.2
This object is used to set the port as client trusted, server trusted or not trusted. Note that the client(1) mode is deprecated. That value will never be returned. Setting that value will set the mode to clientTrust(2) instead.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER client(1), clientTrust(2), serverTrust(3), dualRoleTrust(4), unTrust(5)  

cienaCesDhcpv6LdraVsStateTable 1.3.6.1.4.1.1271.2.1.30.1.2.8
Table allows changing configuration of DHCPv6 LDRA functionality for each VS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraVsStateEntry

cienaCesDhcpv6LdraVsStateEntry 1.3.6.1.4.1.1271.2.1.30.1.2.8.1
Entry in the table to configure DHCPv6 LDRA functionality.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraVsStateEntry  

cienaCesDhcpv6LdraVsVlan 1.3.6.1.4.1.1271.2.1.30.1.2.8.1.1
This object specifies the VS VLAN on which the DHCPv6 LDRA is configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..24576  

cienaCesDhcpv6LdraVsName 1.3.6.1.4.1.1271.2.1.30.1.2.8.1.2
This object shows the name of the VS VLAN on which the DHCPv6 LDRA is configured.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesDhcpv6LdraVsAdminState 1.3.6.1.4.1.1271.2.1.30.1.2.8.1.3
This object allows the user to disable or enable DHCPv6 LDRA functionality on the given VS VLAN specified by cienaCesDhcpv6LdraVsVlan.
Status: current Access: read-create
OBJECT-TYPE    
  CienaGlobalState  

cienaCesDhcpv6LdraVsOperState 1.3.6.1.4.1.1271.2.1.30.1.2.8.1.4
This object shows the operational status of the DHCPv6 LDRA on the given VS VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesDhcpv6LdraVsRowStatus 1.3.6.1.4.1.1271.2.1.30.1.2.8.1.5
Set this object to 'Destroy' to terminate DHCPv6 LDRA Relaying on the VS VLAN specified by cienaCesDhcpv6LdraVsVlan. Set this object to 'CreateAndGo' to enable DHCPv6 LDRA Relaying on the VS VLAN specified by cienaCesDhcpv6LdraVsVlan.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cienaCesDhcpv6LdraVsTrustTable 1.3.6.1.4.1.1271.2.1.30.1.2.9
This table is used to specify the VLANs, ports and sub-VLANs that the DHCPv6 LDRA can trust.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraVsTrustEntry

cienaCesDhcpv6LdraVsTrustEntry 1.3.6.1.4.1.1271.2.1.30.1.2.9.1
Each entry in this table is used to specify the VLAN, port and sub-VLAN to be trusted.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraVsTrustEntry  

cienaCesDhcpv6LdraVsPort 1.3.6.1.4.1.1271.2.1.30.1.2.9.1.1
This object is used as an index in the table and is used to specify the VS port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

cienaCesDhcpv6LdraVsSubVlan 1.3.6.1.4.1.1271.2.1.30.1.2.9.1.2
This object specifies the sub-VLAN on which the DHCPv6 LDRA is configured. Note that the special value 0 means that no sub-VLAN is associated with this particular trust entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..24576  

cienaCesDhcpv6LdraVsPortState 1.3.6.1.4.1.1271.2.1.30.1.2.9.1.3
This object reports whether the specified port and sub-VLAN is active or inactive.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

cienaCesDhcpv6LdraVsTrustMode 1.3.6.1.4.1.1271.2.1.30.1.2.9.1.4
This object is used to set the port and sub-VLAN as client trusted, server trusted or not trusted. Note that the client(1) mode is deprecated. That value will never be returned. Setting that value will set the mode to clientTrust(2) instead.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER client(1), clientTrust(2), serverTrust(3), dualRoleTrust(4), unTrust(5)  

cienaCesDhcpv6LdraVsStatsTable 1.3.6.1.4.1.1271.2.1.30.1.2.10
Table to display VS statistics for each VS LDRA.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraVsStatsEntry

cienaCesDhcpv6LdraVsStatsEntry 1.3.6.1.4.1.1271.2.1.30.1.2.10.1
Entry in the table to display VS LDRA statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraVsStatsEntry  

cienaCesDhcpv6LdraVsPktsForRelay 1.3.6.1.4.1.1271.2.1.30.1.2.10.1.1
This object specifies the number of packets sent to this relay process.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraVsRelayedClient 1.3.6.1.4.1.1271.2.1.30.1.2.10.1.2
This object specifies the number of client sourced DHCPv6 packets relayed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraVsRelayedServer 1.3.6.1.4.1.1271.2.1.30.1.2.10.1.3
This object specifies the number of server sourced DHCPv6 packets relayed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraVsUntrustedClientPortPktsRx 1.3.6.1.4.1.1271.2.1.30.1.2.10.1.4
This object specifies the number of client DHCPv6 packets dropped because they were received on untrusted client ports.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraVsUntrustedServerPortPktsRx 1.3.6.1.4.1.1271.2.1.30.1.2.10.1.5
This object specifies the number of server DHCPv6 packets dropped because they were received on untrusted server ports.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraVsFailedValidationPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.10.1.6
This object specifies the number of DHCPv6 packets dropped due to failed validation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraVsInvalidConfigPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.10.1.7
This object specifies the number of DHCPv6 packets dropped due to LDRA configuration issues.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraVsExceededHopCountPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.10.1.8
This object specifies the number of DHCPv6 packets dropped due to hop count in the packet exceeding hop count the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraVsExceedMTUPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.10.1.9
This object specifies the number of DHCPv6 packets dropped because the new relay frame size would exceed the MTU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraVsNoTrustedServerPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.10.1.10
This object specifies the number of DHCPv6 packets dropped because there are no server trusted ports configured.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraVsNoTrustedClientPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.10.1.11
This object specifies the number of DHCPv6 packets dropped because there are no client trusted ports configured.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraVsIPv6FragBadExtHdrPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.10.1.12
This object specifies the number of DHCPv6 packets dropped due to IPv6 packet extension headers that could not be processed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraVsGeneralErrors 1.3.6.1.4.1.1271.2.1.30.1.2.10.1.13
This object reports the number of DHCPv6 packets dropped due to unclassified errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraVsStatsClear 1.3.6.1.4.1.1271.2.1.30.1.2.10.1.14
This object when set to 'true', clears DHCPv6 LDRA stats for given VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  CienaStatsClear  

cienaCesDhcpv6LdraVsIntidStringTable 1.3.6.1.4.1.1271.2.1.30.1.2.11
This table is used to specify CID strings for VS ports and VLANs that the LDRA can specify in Option 82 CID information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraVsIntidStringEntry

cienaCesDhcpv6LdraVsIntidStringEntry 1.3.6.1.4.1.1271.2.1.30.1.2.11.1
Each entry in this table is used to specify an interface ID string for VS port and VLAN combinations.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraVsIntidStringEntry  

cienaCesDhcpv6LdraVsIntidString 1.3.6.1.4.1.1271.2.1.30.1.2.11.1.1
This object is used to get and set the IntID string for the port.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..64)  

cienaCesDhcpv6LdraVsIntidStringRowStatus 1.3.6.1.4.1.1271.2.1.30.1.2.11.1.2
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table set this object to 'createAndGo'. To delete a row in this table set this object to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cienaCesDhcpv6LdraVsRidStringTable 1.3.6.1.4.1.1271.2.1.30.1.2.12
This table is used to specify RID strings for VS ports and VLANs that the DHCPv6 LDRA can specify in Option 82 RID information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraVsRidStringEntry

cienaCesDhcpv6LdraVsRidStringEntry 1.3.6.1.4.1.1271.2.1.30.1.2.12.1
Each entry in this table is used to specify an RID string for VS port and VLAN combinations.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraVsRidStringEntry  

cienaCesDhcpv6LdraVsRidString 1.3.6.1.4.1.1271.2.1.30.1.2.12.1.1
This MIB object is used to get and set the RID string for the port.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..64)  

cienaCesDhcpv6LdraVsRidStringRowStatus 1.3.6.1.4.1.1271.2.1.30.1.2.12.1.2
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table set this object to 'createAndGo'. To delete a row in this table set this object to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cienaCesDhcpv6LdraMplsStateTable 1.3.6.1.4.1.1271.2.1.30.1.2.13
Table allows changing configuration of DHCPv6 LDRA functionality for each MPLS VS.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraMplsStateEntry

cienaCesDhcpv6LdraMplsStateEntry 1.3.6.1.4.1.1271.2.1.30.1.2.13.1
Entry in the table to configure DHCPv6 LDRA functionality.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraMplsStateEntry  

cienaCesDhcpv6LdraMplsId 1.3.6.1.4.1.1271.2.1.30.1.2.13.1.1
This object specifies the MPLS VS on which DHCPv6 LDRA is configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..1677215  

cienaCesDhcpv6LdraMplsName 1.3.6.1.4.1.1271.2.1.30.1.2.13.1.2
This object shows the name of the MPLS VS on which DHCPv6 LDRA is configured.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesDhcpv6LdraMplsAdminState 1.3.6.1.4.1.1271.2.1.30.1.2.13.1.3
This object allows the user to disable or enable DHCPv6 LDRA functionality on the given MPLS VS specified by cienaCesDhcpv6LdraMplsId.
Status: current Access: read-create
OBJECT-TYPE    
  CienaGlobalState  

cienaCesDhcpv6LdraMplsOperState 1.3.6.1.4.1.1271.2.1.30.1.2.13.1.4
This object shows the operational status of the DHCPv6 LDRA on the given MPLS VS.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesDhcpv6LdraMplsRowStatus 1.3.6.1.4.1.1271.2.1.30.1.2.13.1.5
Set this object to 'Destroy' to terminate DHCPv6 LDRA Relaying on the MPLS VS specified by cienaCesDhcpv6LdraMplsId. Set this object to 'CreateAndGo' to enable DHCPv6 LDRA Relaying on the MPLS VS specified by cienaCesDhcpv6LdraMplsId.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cienaCesDhcpv6LdraMplsTrustTable 1.3.6.1.4.1.1271.2.1.30.1.2.14
This table is used to specify the MPLS VSs and interfaces that the DHCPv6 LDRA can trust.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraMplsTrustEntry

cienaCesDhcpv6LdraMplsTrustEntry 1.3.6.1.4.1.1271.2.1.30.1.2.14.1
Each entry in this table is used to specify the MPLS VS and interface to be trusted.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraMplsTrustEntry  

cienaCesDhcpv6LdraMplsInterface 1.3.6.1.4.1.1271.2.1.30.1.2.14.1.1
This object is used as an index in the table and is used to specify the MPLS interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967295  

cienaCesDhcpv6LdraMplsVcName 1.3.6.1.4.1.1271.2.1.30.1.2.14.1.2
This object shows the name of the MPLS VC.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesDhcpv6LdraMplsInterfaceState 1.3.6.1.4.1.1271.2.1.30.1.2.14.1.3
This object reports whether the specified interface is active or inactive.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

cienaCesDhcpv6LdraMplsTrustMode 1.3.6.1.4.1.1271.2.1.30.1.2.14.1.4
This object is used to set the interface as client trusted, server trusted or not trusted. Note that the client(1) mode is deprecated. That value will never be returned. Setting that value will set the mode to clientTrust(2) instead.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER client(1), clientTrust(2), serverTrust(3), dualRoleTrust(4), unTrust(5)  

cienaCesDhcpv6LdraMplsStatsTable 1.3.6.1.4.1.1271.2.1.30.1.2.15
Table to display MPLS statistics for each MPLS LDRA.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraMplsStatsEntry

cienaCesDhcpv6LdraMplsStatsEntry 1.3.6.1.4.1.1271.2.1.30.1.2.15.1
Entry in the table to display MPLS LDRA statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraMplsStatsEntry  

cienaCesDhcpv6LdraMplsPktsForRelay 1.3.6.1.4.1.1271.2.1.30.1.2.15.1.1
This object specifies the number of packets sent to this relay process.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraMplsRelayedClient 1.3.6.1.4.1.1271.2.1.30.1.2.15.1.2
This object specifies the number of client sourced DHCPv6 packets relayed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraMplsRelayedServer 1.3.6.1.4.1.1271.2.1.30.1.2.15.1.3
This object specifies the number of server sourced DHCPv6 packets relayed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraMplsUntrustedClientInterfacePktsRx 1.3.6.1.4.1.1271.2.1.30.1.2.15.1.4
This object specifies the number of client DHCPv6 packets dropped because they were received on untrusted client interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraMplsUntrustedServerInterfacePktsRx 1.3.6.1.4.1.1271.2.1.30.1.2.15.1.5
This object specifies the number of server DHCPv6 packets dropped because they were received on untrusted server interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraMplsFailedValidationPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.15.1.6
This object specifies the number of DHCPv6 packets dropped due to failed validation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraMplsInvalidConfigPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.15.1.7
This object specifies the number of DHCPv6 packets dropped due to LDRA configuration issues.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraMplsExceededHopCountPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.15.1.8
This object specifies the number of DHCPv6 packets dropped due to hop count in the packet exceeding hop count the limit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraMplsExceedMTUPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.15.1.9
This object specifies the number of DHCPv6 packets dropped because the new relay frame size would exceed the MTU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraMplsNoTrustedServerPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.15.1.10
This object specifies the number of DHCPv6 packets dropped because there are no server trusted interfaces configured.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraMplsNoTrustedClientPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.15.1.11
This object specifies the number of DHCPv6 packets dropped because there are no client trusted interfaces configured.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraMplsIPv6FragBadExtHdrPktDrop 1.3.6.1.4.1.1271.2.1.30.1.2.15.1.12
This object specifies the number of DHCPv6 packets dropped due to IPv6 packet extension headers that could not be processed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraMplsGeneralErrors 1.3.6.1.4.1.1271.2.1.30.1.2.15.1.13
This object specifies the number of DHCPv6 packets dropped due to unclassified errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesDhcpv6LdraMplsStatsClear 1.3.6.1.4.1.1271.2.1.30.1.2.15.1.14
This object when set to 'true', clears DHCPv6 LDRA stats for given VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  CienaStatsClear  

cienaCesDhcpv6LdraMplsIntidStringTable 1.3.6.1.4.1.1271.2.1.30.1.2.16
This table is used to specify interface ID strings for MPLS VSs and interfaces that the DHCPv6 LDRA can specify in Option 82 CID information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraMplsIntidStringEntry

cienaCesDhcpv6LdraMplsIntidStringEntry 1.3.6.1.4.1.1271.2.1.30.1.2.16.1
Each entry in this table is used to specify an interface ID string for MPLS VS and interface combinations.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraMplsIntidStringEntry  

cienaCesDhcpv6LdraMplsIntidString 1.3.6.1.4.1.1271.2.1.30.1.2.16.1.1
This object is used to get and set the IntID string for the interface.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..64)  

cienaCesDhcpv6LdraMplsIntidStringRowStatus 1.3.6.1.4.1.1271.2.1.30.1.2.16.1.2
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table set this object to 'createAndGo'. To delete a row in this table set this object to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cienaCesDhcpv6LdraMplsRidStringTable 1.3.6.1.4.1.1271.2.1.30.1.2.17
This table is used to specify RID strings for MPLS VSs and interfaces that the DHCPv6 LDRA can specify in Option 82 RID information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesDhcpV6LdraMplsRidStringEntry

cienaCesDhcpv6LdraMplsRidStringEntry 1.3.6.1.4.1.1271.2.1.30.1.2.17.1
Each entry in this table is used to specify an RID string for MPLS VS and interface combinations.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesDhcpV6LdraMplsRidStringEntry  

cienaCesDhcpv6LdraMplsRidString 1.3.6.1.4.1.1271.2.1.30.1.2.17.1.1
This MIB object is used to get and set the RID string for the interface.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..64)  

cienaCesDhcpv6LdraMplsRidStringRowStatus 1.3.6.1.4.1.1271.2.1.30.1.2.17.1.2
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table set this object to 'createAndGo'. To delete a row in this table set this object to 'destroy'.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor