CIENA-WS-NOTIFICATION-MIB

File: CIENA-WS-NOTIFICATION-MIB.mib (18354 bytes)

Imported modules

SNMPv2-SMI CIENA-WS-MIB SNMPv2-TC

Imported symbols

Unsigned32 MODULE-IDENTITY OBJECT-TYPE
NOTIFICATION-TYPE OBJECT-IDENTITY cienaWsNotifications
TEXTUAL-CONVENTION TruthValue

Defined Types

DisplayString32  
A UTF-8 string with a max length of 32 characters
TEXTUAL-CONVENTION    
  OCTET STRING Size(1..32)  

Defined Values

cienaWsNotificationMIB 1.3.6.1.4.1.1271.3.2.3
Notification definitions for Waveserver. Contains alarm notifications and link state defects.
MODULE-IDENTITY    

wsAlarmNotification 1.3.6.1.4.1.1271.3.2.11
Ciena Wavesever notification for an alarm raising or clearing
Status: current Access: read-only
NOTIFICATION-TYPE    

wsAlarmNotificationSiteId 1.3.6.1.4.1.1271.3.2.11.1
The system Site ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsAlarmNotificationGroupId 1.3.6.1.4.1.1271.3.2.11.2
The system Group ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsAlarmNotificationMemberId 1.3.6.1.4.1.1271.3.2.11.3
The system Member ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsAlarmNotificationInstanceId 1.3.6.1.4.1.1271.3.2.11.4
The alarm Instance ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

wsAlarmNotificationDateAndTime 1.3.6.1.4.1.1271.3.2.11.5
The local date and time when alarm was raised.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString32  

wsAlarmNotificationTableId 1.3.6.1.4.1.1271.3.2.11.6
The alarm table ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsAlarmNotificationSeverity 1.3.6.1.4.1.1271.3.2.11.7
The alarm severity.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cleared(1), critical(3), major(4), minor(5), warning(6), info(8)  

wsAlarmNotificationInstance 1.3.6.1.4.1.1271.3.2.11.8
The object instance the alarm is raised against.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString32  

wsAlarmNotificationDescription 1.3.6.1.4.1.1271.3.2.11.9
The alarm description.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString32  

wsAlarmNotificationActiveStatus 1.3.6.1.4.1.1271.3.2.11.10
The alarm active status.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

wsAlarmNotificationEntityType 1.3.6.1.4.1.1271.3.2.11.11
The alarm source entity type if applicable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), other(1), clientPort(2), linePort(3)  

wsLinkStateAlarmNotification 1.3.6.1.4.1.1271.3.2.12
Ciena Waveserver notification for line faults.
Status: current Access: read-only
NOTIFICATION-TYPE    

wsLinkStateAlarmNotificationSiteId 1.3.6.1.4.1.1271.3.2.12.1
The line fault site ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsLinkStateAlarmNotificationGroupId 1.3.6.1.4.1.1271.3.2.12.2
The system Group ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsLinkStateAlarmNotificationMemberId 1.3.6.1.4.1.1271.3.2.12.3
The system Member ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

wsLinkStateAlarmNotificationInstanceId 1.3.6.1.4.1.1271.3.2.12.4
The line fault instance ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

wsLinkStateAlarmNotificationDateAndTime 1.3.6.1.4.1.1271.3.2.12.5
The local date and time when alarm was raised.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString32  

wsLinkStateAlarmNotificationSeverity 1.3.6.1.4.1.1271.3.2.12.7
The alarm severity.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cleared(1), critical(3), major(4), minor(5), warning(6), info(8)  

wsLinkStateAlarmNotificationInstance 1.3.6.1.4.1.1271.3.2.12.8
The object instance the alarm is raised against.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString32  

wsLinkStateAlarmNotificationDescription 1.3.6.1.4.1.1271.3.2.12.9
The alarm description.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString32  

wsLinkStateAlarmNotificationPtpDefects 1.3.6.1.4.1.1271.3.2.12.10
Defects related to the physical termination point.
Status: current Access: read-only
OBJECT-IDENTITY    

wsLinkStateAlarmNotificationPtpRxLos 1.3.6.1.4.1.1271.3.2.12.10.1
PTP alarms for the link.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationPtpRxLol 1.3.6.1.4.1.1271.3.2.12.10.2
PTP alarms for the link.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationPtpTxLos 1.3.6.1.4.1.1271.3.2.12.10.3
PTP alarms for the link.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationPtpTxLol 1.3.6.1.4.1.1271.3.2.12.10.4
PTP alarms for the link.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationEthDefects 1.3.6.1.4.1.1271.3.2.12.11
Ethernet defects.
Status: current Access: read-only
OBJECT-IDENTITY    

wsLinkStateAlarmNotificationEthPcsHighBer 1.3.6.1.4.1.1271.3.2.12.11.1
Ethernet PCS high bit error rate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationEthPcsLoam 1.3.6.1.4.1.1271.3.2.12.11.2
Ethernet PCS loss of alignment marker.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationEthPcsLobl 1.3.6.1.4.1.1271.3.2.12.11.3
Ethernet PCS loss of block lock.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationEthRsLinkDown 1.3.6.1.4.1.1271.3.2.12.11.4
Ethernet RS link down.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationEthRsLf 1.3.6.1.4.1.1271.3.2.12.11.5
Ethernet RS local fault.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationEthRsRf 1.3.6.1.4.1.1271.3.2.12.11.6
Ethernet RS remote fault.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationEthFecLossSync 1.3.6.1.4.1.1271.3.2.12.11.7
Ethernet FEC loss of alignment marker.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationEthPmaSool 1.3.6.1.4.1.1271.3.2.12.11.8
Ethernet PMA serdes out of lock.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOtuDefects 1.3.6.1.4.1.1271.3.2.12.12
OTU layer defects.
Status: current Access: read-only
OBJECT-IDENTITY    

wsLinkStateAlarmNotificationOtuLoc 1.3.6.1.4.1.1271.3.2.12.12.1
OTU loss of clock.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOtuFreqOor 1.3.6.1.4.1.1271.3.2.12.12.2
OTU frequency out of range.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOtuLof 1.3.6.1.4.1.1271.3.2.12.12.3
OTU loss of frame.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOtuPreFecSf 1.3.6.1.4.1.1271.3.2.12.12.4
OTU pre-FEC signal fail.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOtuPreFecSd 1.3.6.1.4.1.1271.3.2.12.12.5
OTU pre-FEC signal degrade.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOtuLom 1.3.6.1.4.1.1271.3.2.12.12.6
OTU loss of multi-frame.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOtuBdi 1.3.6.1.4.1.1271.3.2.12.12.7
OTU backwards defect indicator.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOtuTtiMismatch 1.3.6.1.4.1.1271.3.2.12.12.8
OTU TTI mismatch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOduDefects 1.3.6.1.4.1.1271.3.2.12.13
ODU layer defects.
Status: current Access: read-only
OBJECT-IDENTITY    

wsLinkStateAlarmNotificationOduOci 1.3.6.1.4.1.1271.3.2.12.13.1
ODU open connection indication.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOduAis 1.3.6.1.4.1.1271.3.2.12.13.2
ODU alarm indicating signal.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOduLck 1.3.6.1.4.1.1271.3.2.12.13.3
ODU locked.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOduSf 1.3.6.1.4.1.1271.3.2.12.13.4
ODU signal fail.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOduSd 1.3.6.1.4.1.1271.3.2.12.13.5
ODU signal degrade.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOduTtiMismatch 1.3.6.1.4.1.1271.3.2.12.13.6
ODU TTI mismatch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOduBdi 1.3.6.1.4.1.1271.3.2.12.13.7
ODU backwards defect indicator.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOduPtiMismatch 1.3.6.1.4.1.1271.3.2.12.13.8
ODU payload type indicator mismatch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOduFeClientSf 1.3.6.1.4.1.1271.3.2.12.13.9
ODU far-end client signal fail.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationOduSkewOor 1.3.6.1.4.1.1271.3.2.12.13.10
ODU skew out of range.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

wsLinkStateAlarmNotificationEntityType 1.3.6.1.4.1.1271.3.2.12.14
The alarm source entity type if applicable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(0), other(1), clientPort(2), linePort(3)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor