CISCO-BGP-POLICY-ACCOUNTING-MIB

File: CISCO-BGP-POLICY-ACCOUNTING-MIB.mib (7213 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF CISCO-SMI
IF-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter64 MODULE-COMPLIANCE OBJECT-GROUP
ciscoMgmt ifIndex

Defined Types

CbpAcctEntry  
SEQUENCE    
  cbpAcctTrafficIndex Integer32
  cbpAcctInPacketCount Counter64
  cbpAcctInOctetCount Counter64
  cbpAcctOutPacketCount Counter64
  cbpAcctOutOctetCount Counter64

Defined Values

ciscoBgpPolAcctMIB 1.3.6.1.4.1.9.9.148
BGP policy based accounting information
MODULE-IDENTITY    

ciscoBgpPolAcctMIBObjects 1.3.6.1.4.1.9.9.148.1
OBJECT IDENTIFIER    

cbpAcctTable 1.3.6.1.4.1.9.9.148.1.1
The cbpAcctTable provides statistics about ingress and egress traffic on an interface. This data could be used for purposes like billing.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CbpAcctEntry

cbpAcctEntry 1.3.6.1.4.1.9.9.148.1.1.1
Each cbpAcctEntry provides statistics for traffic of interest on an ingress and/or egress interfaces. The traffic of interest may be used for purposes like billing, and is referred to from here on in the MIB by the term 'traffic-type', which corresponds to cbpAcctTrafficIndex. Traffic-types are configured by the user on a per interface basis. The statistics include ingress packet counts, ingress octet counts, egress packet counts and egress octet counts. Entries are created when traffic-type is configured on an interface. Entries are deleted automatically when the user removes the corresponding traffic-type configuration from an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  CbpAcctEntry  

cbpAcctTrafficIndex 1.3.6.1.4.1.9.9.148.1.1.1.1
An integer value greater than 0, that uniquely identifies a traffic-type. The traffic-type has no intrinsic meaning. It just means the traffic coming into an interface can be differentiated into different types. It is up to the user to give meaning to and configure the various traffic-types on an interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

cbpAcctInPacketCount 1.3.6.1.4.1.9.9.148.1.1.1.2
The total number of packets received for a particular traffic-type on an interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cbpAcctInOctetCount 1.3.6.1.4.1.9.9.148.1.1.1.3
The total number of octets received for a particular traffic-type on an interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cbpAcctOutPacketCount 1.3.6.1.4.1.9.9.148.1.1.1.4
The total number of packets transmitted for a particular traffic-type on an interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cbpAcctOutOctetCount 1.3.6.1.4.1.9.9.148.1.1.1.5
The total number of octets transmitted for a particular traffic-type on an interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ciscoBgpPolAcctMIBConformance 1.3.6.1.4.1.9.9.148.3
OBJECT IDENTIFIER    

ciscoBgpPolAcctMIBCompliances 1.3.6.1.4.1.9.9.148.3.1
OBJECT IDENTIFIER    

ciscoBgpPolAcctMIBGroups 1.3.6.1.4.1.9.9.148.3.2
OBJECT IDENTIFIER    

ciscoBgpPolAcctMIBCompliance 1.3.6.1.4.1.9.9.148.3.1.1
The compliance statement for entities which implement this Cisco BGP-Policy Traffic Accounting MIB.
Status: deprecated Access: read-only
MODULE-COMPLIANCE    

ciscoBgpPolAcctMIBComplianceRev1 1.3.6.1.4.1.9.9.148.3.1.2
The compliance statement for entities which implement this Cisco BGP-Policy Traffic Accounting MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

cbpAcctTableGroup 1.3.6.1.4.1.9.9.148.3.2.1
A collection of objects providing customer traffic related parameters.
Status: deprecated Access: read-only
OBJECT-GROUP    

cbpAcctTableGroupRev1 1.3.6.1.4.1.9.9.148.3.2.2
A collection of objects providing customer traffic related parameters.
Status: current Access: read-only
OBJECT-GROUP