CISCO-CIRCUIT-INTERFACE-MIB

File: CISCO-CIRCUIT-INTERFACE-MIB.mib (5760 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
SNMP-FRAMEWORK-MIB	IF-MIB	CISCO-SMI

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	RowStatus
MODULE-COMPLIANCE	OBJECT-GROUP	SnmpAdminString
ifIndex	ciscoMgmt

Defined Types

CciDescriptionEntry
SEQUENCE
	cciDescr	SnmpAdminString
	cciStatus	RowStatus

Defined Values

ciscoCircuitInterfaceMIB		1.3.6.1.4.1.9.9.160
The MIB module to configure the circuit description for an interface. The circuit description can be used to describe and identify circuits on interfaces like ATM, frame-relay etc.
MODULE-IDENTITY

ciscoCircuitInterfaceMIBObjects		1.3.6.1.4.1.9.9.160.1
OBJECT IDENTIFIER

cciDescription		1.3.6.1.4.1.9.9.160.1.1
OBJECT IDENTIFIER

cciDescriptionTable		1.3.6.1.4.1.9.9.160.1.1.1
This table contains a circuit description to identify circuit based interfaces like ATM, Frame-Relay etc. The circuit description could be used for example, to correlate performance statistics associated with the corresponding interfaces.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CciDescriptionEntry

cciDescriptionEntry		1.3.6.1.4.1.9.9.160.1.1.1.1
Each cciDescriptionEntry contains the circuit description for a particular circuit based interface. The entry is identified by the ifIndex which would typically correspond to circuit based interfaces. Interfaces with ifType equal to atm(37), frameRelay(32) frameRelayService(44) are some examples. Entries can only be created by management station action. Entries can be deleted by setting the cciStatus object to destroy(6). The agent will delete any cciEntry if the corresponding ifEntry is deleted. Entries are not maintained in any kind of NV-storage, and will not be recreated by the agent after a reboot.
Status: current	Access: not-accessible
OBJECT-TYPE
	CciDescriptionEntry

cciDescr		1.3.6.1.4.1.9.9.160.1.1.1.1.1
The circuit description of the interface. It has no default value.
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString	Size(0..255)

cciStatus		1.3.6.1.4.1.9.9.160.1.1.1.1.2
The row status object, but with restricted values. Only two values are allowed for this object: createAndGo(4) and destroy(6). The row is created by specifying the value for cciDescr and setting this object to createAndGo(4). If the row creation is succesfull, the cciStatus would be active(1). In the active(1) state, the cciDescr can be modifed. The row is deleted by setting this object to destroy(6).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

ciscoCircuitInterfaceMIBConformance		1.3.6.1.4.1.9.9.160.3
OBJECT IDENTIFIER

ciscoCircuitInterfaceMIBCompliances		1.3.6.1.4.1.9.9.160.3.1
OBJECT IDENTIFIER

ciscoCircuitInterfaceMIBGroups		1.3.6.1.4.1.9.9.160.3.2
OBJECT IDENTIFIER

ciscoCircuitInterfaceMIBCompliance		1.3.6.1.4.1.9.9.160.3.1.1
The compliance statement for Cisco agents which implement the Cisco Circuit Interface MIB.
Status: current	Access: read-create
MODULE-COMPLIANCE

ciscoCircuitInterfaceGroup		1.3.6.1.4.1.9.9.160.3.2.1
The Cisco Circuit Interface MIB objects.
Status: current	Access: read-create
OBJECT-GROUP

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor