CISCO-DIAMETER-BASE-PROTOCOL-MIB

File: CISCO-DIAMETER-BASE-PROTOCOL-MIB.mib (90565 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
INET-ADDRESS-MIB	SNMP-FRAMEWORK-MIB	CISCO-SMI

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
Counter32	Unsigned32	Gauge32
IpAddress	TimeTicks	NOTIFICATION-GROUP
MODULE-COMPLIANCE	OBJECT-GROUP	StorageType
TruthValue	RowStatus	InetAddress
InetAddressType	SnmpAdminString	ciscoExperiment

Defined Types

CdbpLocalIpAddrEntry
SEQUENCE
	cdbpLocalIpAddrIndex	Unsigned32
	cdbpLocalIpAddrType	InetAddressType
	cdbpLocalIpAddress	InetAddress

CdbpLocalApplEntry
SEQUENCE
	cdbpLocalApplIndex	Unsigned32
	cdbpLocalApplStorageType	StorageType
	cdbpLocalApplRowStatus	RowStatus

CdbpLocalVendorEntry
SEQUENCE
	cdbpLocalVendorIndex	Unsigned32
	cdbpLocalVendorId	INTEGER
	cdbpLocalVendorStorageType	StorageType
	cdbpLocalVendorRowStatus	RowStatus

CdbpAppAdvToPeerEntry
SEQUENCE
	cdbpAppAdvToPeerVendorId	Unsigned32
	cdbpAppAdvToPeerIndex	Unsigned32
	cdbpAppAdvToPeerServices	INTEGER
	cdbpAppAdvToPeerStorageType	StorageType
	cdbpAppAdvToPeerRowStatus	RowStatus

CdbpPeerEntry
SEQUENCE
	cdbpPeerIndex	Unsigned32
	cdbpPeerId	SnmpAdminString
	cdbpPeerPortConnect	Unsigned32
	cdbpPeerPortListen	Unsigned32
	cdbpPeerProtocol	INTEGER
	cdbpPeerSecurity	INTEGER
	cdbpPeerFirmwareRevision	Unsigned32
	cdbpPeerStorageType	StorageType
	cdbpPeerRowStatus	RowStatus

CdbpPeerIpAddrEntry
SEQUENCE
	cdbpPeerIpAddressIndex	Unsigned32
	cdbpPeerIpAddressType	InetAddressType
	cdbpPeerIpAddress	IpAddress

CdbpAppAdvFromPeerEntry
SEQUENCE
	cdbpAppAdvFromPeerVendorId	Unsigned32
	cdbpAppAdvFromPeerIndex	Unsigned32
	cdbpAppAdvFromPeerType	INTEGER

CdbpPeerVendorEntry
SEQUENCE
	cdbpPeerVendorIndex	Unsigned32
	cdbpPeerVendorId	INTEGER
	cdbpPeerVendorStorageType	StorageType
	cdbpPeerVendorRowStatus	RowStatus

CdbpPeerStatsEntry
SEQUENCE
	cdbpPeerStatsState	INTEGER
	cdbpPeerStatsStateDuration	TimeTicks
	cdbpPeerStatsLastDiscCause	INTEGER
	cdbpPeerStatsWhoInitDisconnect	INTEGER
	cdbpPeerStatsDWCurrentStatus	INTEGER
	cdbpPeerStatsTimeoutConnAtmpts	Counter32
	cdbpPeerStatsASRsIn	Counter32
	cdbpPeerStatsASRsOut	Counter32
	cdbpPeerStatsASAsIn	Counter32
	cdbpPeerStatsASAsOut	Counter32
	cdbpPeerStatsACRsIn	Counter32
	cdbpPeerStatsACRsOut	Counter32
	cdbpPeerStatsACAsIn	Counter32
	cdbpPeerStatsACAsOut	Counter32
	cdbpPeerStatsCERsIn	Counter32
	cdbpPeerStatsCERsOut	Counter32
	cdbpPeerStatsCEAsIn	Counter32
	cdbpPeerStatsCEAsOut	Counter32
	cdbpPeerStatsDWRsIn	Counter32
	cdbpPeerStatsDWRsOut	Counter32
	cdbpPeerStatsDWAsIn	Counter32
	cdbpPeerStatsDWAsOut	Counter32
	cdbpPeerStatsDPRsIn	Counter32
	cdbpPeerStatsDPRsOut	Counter32
	cdbpPeerStatsDPAsIn	Counter32
	cdbpPeerStatsDPAsOut	Counter32
	cdbpPeerStatsRARsIn	Counter32
	cdbpPeerStatsRARsOut	Counter32
	cdbpPeerStatsRAAsIn	Counter32
	cdbpPeerStatsRAAsOut	Counter32
	cdbpPeerStatsSTRsIn	Counter32
	cdbpPeerStatsSTRsOut	Counter32
	cdbpPeerStatsSTAsIn	Counter32
	cdbpPeerStatsSTAsOut	Counter32
	cdbpPeerStatsDWReqTimer	TimeTicks
	cdbpPeerStatsRedirectEvents	Counter32
	cdbpPeerStatsAccDupRequests	Counter32
	cdbpPeerStatsMalformedReqsts	Counter32
	cdbpPeerStatsAccsNotRecorded	Counter32
	cdbpPeerStatsAccRetrans	Counter32
	cdbpPeerStatsTotalRetrans	Counter32
	cdbpPeerStatsAccPendReqstsOut	Gauge32
	cdbpPeerStatsAccReqstsDropped	Counter32
	cdbpPeerStatsHByHDropMessages	Counter32
	cdbpPeerStatsEToEDupMessages	Counter32
	cdbpPeerStatsUnknownTypes	Counter32
	cdbpPeerStatsProtocolErrors	Counter32
	cdbpPeerStatsTransientFailures	Counter32
	cdbpPeerStatsPermanentFailures	Counter32
	cdbpPeerStatsTransportDown	Counter32

CdbpRealmKnownPeersEntry
SEQUENCE
	cdbpRealmKnownPeersIndex	Unsigned32
	cdbpRealmKnownPeers	Unsigned32
	cdbpRealmKnownPeersChosen	INTEGER

CdbpRealmMessageRouteEntry
SEQUENCE
	cdbpRealmMessageRouteIndex	Unsigned32
	cdbpRealmMessageRouteRealm	SnmpAdminString
	cdbpRealmMessageRouteApp	Unsigned32
	cdbpRealmMessageRouteType	INTEGER
	cdbpRealmMessageRouteAction	INTEGER
	cdbpRealmMessageRouteACRsIn	Counter32
	cdbpRealmMessageRouteACRsOut	Counter32
	cdbpRealmMessageRouteACAsIn	Counter32
	cdbpRealmMessageRouteACAsOut	Counter32
	cdbpRealmMessageRouteRARsIn	Counter32
	cdbpRealmMessageRouteRARsOut	Counter32
	cdbpRealmMessageRouteRAAsIn	Counter32
	cdbpRealmMessageRouteRAAsOut	Counter32
	cdbpRealmMessageRouteSTRsIn	Counter32
	cdbpRealmMessageRouteSTRsOut	Counter32
	cdbpRealmMessageRouteSTAsIn	Counter32
	cdbpRealmMessageRouteSTAsOut	Counter32
	cdbpRealmMessageRouteASRsIn	Counter32
	cdbpRealmMessageRouteASRsOut	Counter32
	cdbpRealmMessageRouteASAsIn	Counter32
	cdbpRealmMessageRouteASAsOut	Counter32
	cdbpRealmMessageRouteAccRetrans	Counter32
	cdbpRealmMessageRouteAccDupReqsts	Counter32
	cdbpRealmMessageRoutePendReqstsOut	Gauge32
	cdbpRealmMessageRouteReqstsDrop	Counter32

Defined Values

ciscoDiameterBasePMIB		1.3.6.1.4.1.9.10.133
The MIB module for entities implementing the Diameter Base Protocol. Initial Cisco'ized version of the IETF draft draft-zorn-dime-diameter-base-protocol-mib-00.txt.
MODULE-IDENTITY

ciscoDiameterBasePMIBNotifs		1.3.6.1.4.1.9.10.133.0
OBJECT IDENTIFIER

ciscoDiameterBasePMIBObjects		1.3.6.1.4.1.9.10.133.1
OBJECT IDENTIFIER

ciscoDiameterBasePMIBConform		1.3.6.1.4.1.9.10.133.2
OBJECT IDENTIFIER

cdbpLocalCfgs		1.3.6.1.4.1.9.10.133.1.1
OBJECT IDENTIFIER

cdbpLocalStats		1.3.6.1.4.1.9.10.133.1.2
OBJECT IDENTIFIER

cdbpPeerCfgs		1.3.6.1.4.1.9.10.133.1.3
OBJECT IDENTIFIER

cdbpPeerStats		1.3.6.1.4.1.9.10.133.1.4
OBJECT IDENTIFIER

cdbpRealmCfgs		1.3.6.1.4.1.9.10.133.1.5
OBJECT IDENTIFIER

cdbpRealmStats		1.3.6.1.4.1.9.10.133.1.6
OBJECT IDENTIFIER

cdbpTrapCfgs		1.3.6.1.4.1.9.10.133.1.7
OBJECT IDENTIFIER

ciscoDiaBaseProtEnableProtocolErrorNotif		1.3.6.1.4.1.9.10.133.1.7.1
Setting the value of this object to true(1) enables the ciscoDiaBaseProtProtocolErrorNotif notification.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ciscoDiaBaseProtProtocolErrorNotif		1.3.6.1.4.1.9.10.133.0.1
An ciscoDiaBaseProtProtocolErrorNotif notification is sent when both the following conditions are true: 1) the value of ciscoDiaBaseProtEnableProtocolErrorNotif is true(1) 2) the value of cdbpPeerStatsProtocolErrors changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.
Status: current	Access: read-write
NOTIFICATION-TYPE

ciscoDiaBaseProtEnableTransientFailureNotif		1.3.6.1.4.1.9.10.133.1.7.2
Setting the value of this object to true(1) enables the ciscoDiaBaseProtTransientFailureNotif notification.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ciscoDiaBaseProtTransientFailureNotif		1.3.6.1.4.1.9.10.133.0.2
An ciscoDiaBaseProtTransientFailureNotif notification is sent when both the following conditions are true: 1) the value of ciscoDiaBaseProtEnableTransientFailureNotif is true(1) 2) the value of cdbpPeerStatsTransientFailures changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.
Status: current	Access: read-write
NOTIFICATION-TYPE

ciscoDiaBaseProtEnablePermanentFailureNotif		1.3.6.1.4.1.9.10.133.1.7.3
Setting the value of this object to true(1) enables the ciscoDiaBaseProtPermanentFailureNotif notification.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ciscoDiaBaseProtPermanentFailureNotif		1.3.6.1.4.1.9.10.133.0.3
An ciscoDiaBaseProtPermanentFailureNotif notification is sent when both the following conditions are true: 1) the value of ciscoDiaBaseProtEnablePermanentFailureNotif is true(1) 2) the value of cdbpPeerStatsPermanentFailures changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.
Status: current	Access: read-write
NOTIFICATION-TYPE

ciscoDiaBaseProtEnablePeerConnectionDownNotif		1.3.6.1.4.1.9.10.133.1.7.4
Setting the value of this object to true(1) enables the ciscoDiaBaseProtPeerConnectionDownNotif notification.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ciscoDiaBaseProtPeerConnectionDownNotif		1.3.6.1.4.1.9.10.133.0.4
An ciscoDiaBaseProtPeerConnectionDownNotif notification is sent when both the following conditions are true: 1) the value of ciscoDiaBaseProtEnablePeerConnectionDownNotif is true(1) 2) cdbpPeerStatsState changes to closed(1). It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.
Status: current	Access: read-write
NOTIFICATION-TYPE

ciscoDiaBaseProtEnablePeerConnectionUpNotif		1.3.6.1.4.1.9.10.133.1.7.5
Setting the value of this object to true(1) enables the ciscoDiaBaseProtPeerConnectionUpNotif notification.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

ciscoDiaBaseProtPeerConnectionUpNotif		1.3.6.1.4.1.9.10.133.0.5
An ciscoDiaBaseProtPeerConnectionUpNotif notification is sent when both the following conditions are true: 1) the value of ciscoDiaBaseProtEnablePeerConnectionUpNotif is true(1) 2) the value of cdbpPeerStatsState changes to either rOpen(6)or iOpen(7). It can be utilized by an NMS to trigger logical/physical entity table maintenance polls.
Status: current	Access: read-write
NOTIFICATION-TYPE

cdbpLocalId		1.3.6.1.4.1.9.10.133.1.1.1
The implementation identification string for the Diameter software in use on the system, for example; 'diameterd'
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

cdbpLocalIpAddrTable		1.3.6.1.4.1.9.10.133.1.1.2
The table listing the Diameter local host's IP Addresses.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CdbpLocalIpAddrEntry

cdbpLocalIpAddrEntry		1.3.6.1.4.1.9.10.133.1.1.2.1
A row entry representing a Diameter local host IP Address.
Status: current	Access: not-accessible
OBJECT-TYPE
	CdbpLocalIpAddrEntry

cdbpLocalIpAddrIndex		1.3.6.1.4.1.9.10.133.1.1.2.1.1
A number uniquely identifying the number of IP Addresses supported by this Diameter host.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

cdbpLocalIpAddrType		1.3.6.1.4.1.9.10.133.1.1.2.1.2
The type of internet address stored in cdbpLocalIpAddress.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

cdbpLocalIpAddress		1.3.6.1.4.1.9.10.133.1.1.2.1.3
The IP-Address of the host, which is of the type specified in cdbpLocalIpAddrType.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

cdbpLocalTcpListenPort		1.3.6.1.4.1.9.10.133.1.1.3
This object represents Diameter TCP 'listen' port.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

cdbpLocalSctpListenPort		1.3.6.1.4.1.9.10.133.1.1.4
This object represents Diameter SCTP 'listen' port.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

cdbpLocalOriginHost		1.3.6.1.4.1.9.10.133.1.1.5
This object represents the Local Origin Host.
Status: current	Access: read-write
OBJECT-TYPE
	SnmpAdminString

cdbpLocalRealm		1.3.6.1.4.1.9.10.133.1.1.6
This object represents the Local Realm Name.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

cdbpRedundancyEnabled		1.3.6.1.4.1.9.10.133.1.1.7
This parameter indicates if cisco redundancy has been enabled, it is enabled if set to true and disabled if set to false.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

cdbpRedundancyInfraState		1.3.6.1.4.1.9.10.133.1.1.8
This parameter indicates the current state of cisco redundancy infrastructure state. rfUnknown(0) - unknown state rfDisabled(1) - RF is not functioning at this time rfInitialization(2) - co-ordinating init with platform rfNegotiation(3) - initial negotiation with peer to determine active-standby rfStandbyCold(4) - peer is active, we're cold rfStandbyConfig(5) - sync config from active to standby rfStandbyFileSys(6) - sync file sys from active to standby rfStandbyBulk(7) - clients bulk sync from active to standby rfStandbyHot(8) - standby ready-n-able to be active rfActiveFast(9) - immediate notification of standby going active rfActiveDrain(10) - drain queued messages from peer rfActivePreconfig(11) - active and before config rfActivePostconfig(12) - active and post config rfActive(13) - actively processing new calls rfActiveExtraload(14) - actively processing new calls extra resources other Processing is failed and I have extra load.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	rfUnknown(0), rfDisabled(1), rfInitialization(2), rfNegotiation(3), rfStandbyCold(4), rfStandbyConfig(5), rfStandbyFileSys(6), rfStandbyBulk(7), rfStandbyHot(8), rfActiveFast(9), rfActiveDrain(10), rfActivePreconfig(11), rfActivePostconfig(12), rfActive(13), rfActiveExtraload(14)

cdbpRedundancyLastSwitchover		1.3.6.1.4.1.9.10.133.1.1.9
This object represents the Last Switchover Time.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

cdbpLocalApplTable		1.3.6.1.4.1.9.10.133.1.1.10
The table listing the Diameter applications supported by this server.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CdbpLocalApplEntry

cdbpLocalApplEntry		1.3.6.1.4.1.9.10.133.1.1.10.1
A row entry representing a Diameter application on this server.
Status: current	Access: not-accessible
OBJECT-TYPE
	CdbpLocalApplEntry

cdbpLocalApplIndex		1.3.6.1.4.1.9.10.133.1.1.10.1.1
A number uniquely identifying a supported Diameter application. Upon reload, cdbpLocalApplIndex values may be changed.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

cdbpLocalApplStorageType		1.3.6.1.4.1.9.10.133.1.1.10.1.2
The storage type for this conceptual row. None of the columnar objects is writable when the conceptual row is permanent.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

cdbpLocalApplRowStatus		1.3.6.1.4.1.9.10.133.1.1.10.1.3
The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdsgStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdbpLocalApplIndex has been set. cdbpLocalApplIndex may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdbpLocalApplStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdbpLocalApplStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdbpLocalApplStatus equal to values other than active(1) will be destroyed after timeout (5 minutes).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

cdbpLocalVendorTable		1.3.6.1.4.1.9.10.133.1.1.11
The table listing the vendor IDs supported by local Diameter.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CdbpLocalVendorEntry

cdbpLocalVendorEntry		1.3.6.1.4.1.9.10.133.1.1.11.1
A row entry representing a vendor ID supported by local Diameter.
Status: current	Access: not-accessible
OBJECT-TYPE
	CdbpLocalVendorEntry

cdbpLocalVendorIndex		1.3.6.1.4.1.9.10.133.1.1.11.1.1
A number uniquely identifying the vendor ID supported by local Diameter. Upon reload, cdbpLocalVendorIndex values may be changed.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

cdbpLocalVendorId		1.3.6.1.4.1.9.10.133.1.1.11.1.2
The active vendor ID used for peer connections. diameterVendorIetf(0) - Diameter vendor id ietf diameterVendorCisco(9) - Diameter vendor id cisco diameterVendor3gpp(10415) - Diameter vendor id 3gpp diameterVendorVodafone(12645) - Diameter vendor id vodafone.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	diameterVendorIetf(0), diameterVendorCisco(9), diameterVendor3gpp(10415), diameterVendorVodafone(12645)

cdbpLocalVendorStorageType		1.3.6.1.4.1.9.10.133.1.1.11.1.3
The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

cdbpLocalVendorRowStatus		1.3.6.1.4.1.9.10.133.1.1.11.1.4
The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdbpLocalVendorRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdbpLocalVendorId has been set. cdbpLocalVendorId may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdbpLocalVendorRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdbpLocalVendorRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdbpLocalVendorRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

cdbpAppAdvToPeerTable		1.3.6.1.4.1.9.10.133.1.1.12
The table listing the applications advertised by this host to each peer and the types of service supported: accounting, authentication or both.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CdbpAppAdvToPeerEntry

cdbpAppAdvToPeerEntry		1.3.6.1.4.1.9.10.133.1.1.12.1
A row entry representing a discovered or configured Diameter peer server.
Status: current	Access: not-accessible
OBJECT-TYPE
	CdbpAppAdvToPeerEntry

cdbpAppAdvToPeerVendorId		1.3.6.1.4.1.9.10.133.1.1.12.1.1
The IANA Enterprise Code value assigned to the vendor of the Diameter device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

cdbpAppAdvToPeerIndex		1.3.6.1.4.1.9.10.133.1.1.12.1.2
A number uniquely identifying the Diameter applications advertised as supported by this host to each peer. Upon reload, cdbpAppAdvToPeerIndex values may be changed.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

cdbpAppAdvToPeerServices		1.3.6.1.4.1.9.10.133.1.1.12.1.3
The type of services supported for each application, accounting, authentication or both. acct(1) - accounting auth(2) - authentication both(3) - both accounting and authentication.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	acct(1), auth(2), both(3)

cdbpAppAdvToPeerStorageType		1.3.6.1.4.1.9.10.133.1.1.12.1.4
The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

cdbpAppAdvToPeerRowStatus		1.3.6.1.4.1.9.10.133.1.1.12.1.5
The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdbpAppAdvToPeerRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdbpAppAdvToPeerVendorId has been set. cdbpAppAdvToPeerVendorId may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdbpAppAdvToPeerRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdbpAppAdvToPeerRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdbpAppAdvToPeerRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

cdbpLocalStatsTotalPacketsIn		1.3.6.1.4.1.9.10.133.1.2.1
The total number of packets received by Diameter Base Protocol.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpLocalStatsTotalPacketsOut		1.3.6.1.4.1.9.10.133.1.2.2
The total number of packets transmitted by Diameter Base Protocol.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpLocalStatsTotalUpTime		1.3.6.1.4.1.9.10.133.1.2.3
This object represents the total time the Diameter server has been up until now.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

cdbpLocalResetTime		1.3.6.1.4.1.9.10.133.1.2.4
If the server keeps persistent state (e.g., a process) and supports a 'reset' operation (e.g., can be told to re-read configuration files), this value will be the time elapsed (in hundredths of a second) since the server was 'reset'. For software that does not have persistence or does not support a 'reset' operation, this value will be zero.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

cdbpLocalConfigReset		1.3.6.1.4.1.9.10.133.1.2.5
Status/action object to reinitialize any persistent server state. When set to reset(2), any persistent server state (such as a process) is reinitialized as if the server had just been started. This value will never be returned by a read operation. When read, one of the following values will be returned: other(1) - server in some unknown state. reset(2) - command to reinitialize server state. initializing(3) - server (re)initializing. running(4) - server currently running.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), reset(2), initializing(3), running(4)

cdbpPeerTable		1.3.6.1.4.1.9.10.133.1.3.1
The table listing information regarding the discovered or configured Diameter peer servers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CdbpPeerEntry

cdbpPeerEntry		1.3.6.1.4.1.9.10.133.1.3.1.1
A row entry representing a discovered or configured Diameter peer server.
Status: current	Access: not-accessible
OBJECT-TYPE
	CdbpPeerEntry

cdbpPeerIndex		1.3.6.1.4.1.9.10.133.1.3.1.1.1
A number uniquely identifying each Diameter peer with which the host server communicates. Upon reload, cdbpPeerIndex values may be changed.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

cdbpPeerId		1.3.6.1.4.1.9.10.133.1.3.1.1.2
The server identifier for the Diameter peer. It must be unique and non-empty.
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString

cdbpPeerPortConnect		1.3.6.1.4.1.9.10.133.1.3.1.1.3
The connection port this server used to connect to the Diameter peer. If there is no active connection, this value will be zero(0).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..65535

cdbpPeerPortListen		1.3.6.1.4.1.9.10.133.1.3.1.1.4
The port the server is listening on.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..65535

cdbpPeerProtocol		1.3.6.1.4.1.9.10.133.1.3.1.1.5
The transport protocol (tcp/sctp) the Diameter peer is using. tcp(1) - Transmission Control Protocol sctp(2) - Stream Control Transmission Protocol.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	tcp(1), sctp(2)

cdbpPeerSecurity		1.3.6.1.4.1.9.10.133.1.3.1.1.6
The security the Diameter peer is using. other(1) - Unknown Security Protocol. tls(2) - Transport Layer Security Protocol. ipsec(3) - Internet Protocol Security.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), tls(2), ipsec(3)

cdbpPeerFirmwareRevision		1.3.6.1.4.1.9.10.133.1.3.1.1.7
Firmware revision of peer. If no firmware revision, the revision of the Diameter software module may be reported instead.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..4294967295

cdbpPeerStorageType		1.3.6.1.4.1.9.10.133.1.3.1.1.8
The storage type for this conceptual row. Only cdbpPeerPortListen object is writable when the conceptual row is permanent.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

cdbpPeerRowStatus		1.3.6.1.4.1.9.10.133.1.3.1.1.9
The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdbpPeerRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdbpPeerId has been set. cdbpPeerId may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdbpPeerRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdbpPeerRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdbpPeerRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

cdbpPeerIpAddrTable		1.3.6.1.4.1.9.10.133.1.3.2
The table listing the Diameter server IP Addresses.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CdbpPeerIpAddrEntry

cdbpPeerIpAddrEntry		1.3.6.1.4.1.9.10.133.1.3.2.1
A row entry representing peer Diameter server IP Addresses.
Status: current	Access: not-accessible
OBJECT-TYPE
	CdbpPeerIpAddrEntry

cdbpPeerIpAddressIndex		1.3.6.1.4.1.9.10.133.1.3.2.1.1
A number uniquely identifying the number of IP Addresses supported by all Diameter peers.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

cdbpPeerIpAddressType		1.3.6.1.4.1.9.10.133.1.3.2.1.2
The type of address stored in diameterPeerIpAddress.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

cdbpPeerIpAddress		1.3.6.1.4.1.9.10.133.1.3.2.1.3
The active IP Address(es) used for connections.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

cdbpAppAdvFromPeerTable		1.3.6.1.4.1.9.10.133.1.3.3
The table listing the applications advertised by each peer to this host and the types of service supported: accounting, authentication or both.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CdbpAppAdvFromPeerEntry

cdbpAppAdvFromPeerEntry		1.3.6.1.4.1.9.10.133.1.3.3.1
A row entry representing a discovered or configured Diameter peer server.
Status: current	Access: not-accessible
OBJECT-TYPE
	CdbpAppAdvFromPeerEntry

cdbpAppAdvFromPeerVendorId		1.3.6.1.4.1.9.10.133.1.3.3.1.1
The IANA Enterprise Code value assigned to the vendor of the Diameter device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

cdbpAppAdvFromPeerIndex		1.3.6.1.4.1.9.10.133.1.3.3.1.2
A number uniquely identifying the applications advertised as supported from each Diameter peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

cdbpAppAdvFromPeerType		1.3.6.1.4.1.9.10.133.1.3.3.1.3
The type of services supported for each application, accounting, authentication or both. acct(1) - accounting auth(2) - authentication both(3) - both accounting and authentication.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	acct(1), auth(2), both(3)

cdbpPeerVendorTable		1.3.6.1.4.1.9.10.133.1.3.4
The table listing the Vendor IDs supported by the peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CdbpPeerVendorEntry

cdbpPeerVendorEntry		1.3.6.1.4.1.9.10.133.1.3.4.1
A row entry representing a Vendor ID supported by the peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	CdbpPeerVendorEntry

cdbpPeerVendorIndex		1.3.6.1.4.1.9.10.133.1.3.4.1.1
A number uniquely identifying the Vendor ID supported by the peer. Upon reload, cdbpPeerVendorIndex values may be changed.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

cdbpPeerVendorId		1.3.6.1.4.1.9.10.133.1.3.4.1.2
The active vendor ID used for peer connections. diameterVendorIetf(0) - Diameter vendor id ietf diameterVendorCisco(9) - Diameter vendor id cisco diameterVendor3gpp(10415) - Diameter vendor id 3gpp diameterVendorVodafone(12645) - Diameter vendor id vodafone.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	diameterVendorIetf(0), diameterVendorCisco(9), diameterVendor3gpp(10415), diameterVendorVodafone(12645)

cdbpPeerVendorStorageType		1.3.6.1.4.1.9.10.133.1.3.4.1.3
The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent.
Status: current	Access: read-create
OBJECT-TYPE
	StorageType

cdbpPeerVendorRowStatus		1.3.6.1.4.1.9.10.133.1.3.4.1.4
The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdbpPeerVendorRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdbpPeerVendorId has been set. Also, a newly created row cannot be made active until the corresponding 'cdbpPeerIndex' has been set. cdbpPeerVendorId may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdbpPeerVendorRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdbpPeerVendorRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdbpPeerVendorRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

cdbpPeerStatsTable		1.3.6.1.4.1.9.10.133.1.4.1
The table listing the Diameter peer statistics.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CdbpPeerStatsEntry

cdbpPeerStatsEntry		1.3.6.1.4.1.9.10.133.1.4.1.1
A row entry representing a Diameter peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	CdbpPeerStatsEntry

cdbpPeerStatsState		1.3.6.1.4.1.9.10.133.1.4.1.1.1
Connection state in the Peer State Machine of the peer with which this Diameter server is communicating. closed(1) - Connection closed with this peer. waitConnAck(2) - Waiting for an acknowledgment from this peer. waitICEA(3) - Waiting for a Capabilities-Exchange- Answer from this peer. elect(4) - When the peer and the server are both trying to bring up a connection with each other at the same time. An election process begins which determines which socket remains open. waitReturns(5) - Waiting for election returns. r-open(6) - Responder transport connection is used for communication. i-open(7) - Initiator transport connection is used for communication. closing(8) - Actively closing and doing cleanup.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	closed(1), waitConnAck(2), waitICEA(3), elect(4), waitReturns(5), rOpen(6), iOpen(7), closing(8)

cdbpPeerStatsStateDuration		1.3.6.1.4.1.9.10.133.1.4.1.1.2
This object represents the Peer state duration.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

cdbpPeerStatsLastDiscCause		1.3.6.1.4.1.9.10.133.1.4.1.1.3
The last cause for a peers disconnection. rebooting(1) - A scheduled reboot is imminent. busy(2) - The peer's internal resources are constrained, and it has determined that the transport connection needs to be shutdown. doNotWantToTalk(3) - The peer has determined that it does not see a need for the transport connection to exist, since it does not expect any messages to be exchanged in the foreseeable future. electionLost(4) - The peer has determined that it has lost the election process and has therefore disconnected the transport connection.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	rebooting(1), busy(2), doNotWantToTalk(3), election(4)

cdbpPeerStatsWhoInitDisconnect		1.3.6.1.4.1.9.10.133.1.4.1.1.4
Did the host or peer initiate the disconnect? host(1) - If this server initiated the disconnect. peer(2) - If the peer with which this server was connected initiated the disconnect.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	host(1), peer(2)

cdbpPeerStatsDWCurrentStatus		1.3.6.1.4.1.9.10.133.1.4.1.1.5
This object indicates the connection status. okay(1) - Indicates the connection is presumed working. suspect(2) - Indicates the connection is possibly congested or down. down(3) - The peer is no longer reachable, causing the transport connection to be shutdown. reopen(4) - Three watchdog messages are exchanged with accepted round trip times, and the connection to the peer is considered stabilized.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	okay(1), suspect(2), down(3), reopen(4)

cdbpPeerStatsTimeoutConnAtmpts		1.3.6.1.4.1.9.10.133.1.4.1.1.6
If there is no transport connection with a peer, this is the number of times the server attempts to connect to that peer. This is reset on disconnection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsASRsIn		1.3.6.1.4.1.9.10.133.1.4.1.1.7
Abort-Session-Request messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsASRsOut		1.3.6.1.4.1.9.10.133.1.4.1.1.8
Abort-Session-Request messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsASAsIn		1.3.6.1.4.1.9.10.133.1.4.1.1.9
Number of Abort-Session-Answer messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsASAsOut		1.3.6.1.4.1.9.10.133.1.4.1.1.10
Number of Abort-Session-Answer messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsACRsIn		1.3.6.1.4.1.9.10.133.1.4.1.1.11
Number of Accounting-Request messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsACRsOut		1.3.6.1.4.1.9.10.133.1.4.1.1.12
Number of Accounting-Request messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsACAsIn		1.3.6.1.4.1.9.10.133.1.4.1.1.13
Number of Accounting-Answer messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsACAsOut		1.3.6.1.4.1.9.10.133.1.4.1.1.14
Number of Accounting-Answer messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsCERsIn		1.3.6.1.4.1.9.10.133.1.4.1.1.15
Number of Capabilities-Exchange-Request messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsCERsOut		1.3.6.1.4.1.9.10.133.1.4.1.1.16
Number of Capabilities-Exchange-Request messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsCEAsIn		1.3.6.1.4.1.9.10.133.1.4.1.1.17
Number of Capabilities-Exchange-Answer messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsCEAsOut		1.3.6.1.4.1.9.10.133.1.4.1.1.18
Number of Capabilities-Exchange-Answer messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsDWRsIn		1.3.6.1.4.1.9.10.133.1.4.1.1.19
Number of Device-Watchdog-Request messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsDWRsOut		1.3.6.1.4.1.9.10.133.1.4.1.1.20
Number of Device-Watchdog-Request messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsDWAsIn		1.3.6.1.4.1.9.10.133.1.4.1.1.21
Number of Device-Watchdog-Answer messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsDWAsOut		1.3.6.1.4.1.9.10.133.1.4.1.1.22
Number of Device-Watchdog-Answer messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsDPRsIn		1.3.6.1.4.1.9.10.133.1.4.1.1.23
Number of Disconnect-Peer-Request messages received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsDPRsOut		1.3.6.1.4.1.9.10.133.1.4.1.1.24
Number of Disconnect-Peer-Request messages sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsDPAsIn		1.3.6.1.4.1.9.10.133.1.4.1.1.25
Number of Disconnect-Peer-Answer messages received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsDPAsOut		1.3.6.1.4.1.9.10.133.1.4.1.1.26
Number of Disconnect-Peer-Answer messages sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsRARsIn		1.3.6.1.4.1.9.10.133.1.4.1.1.27
Number of Re-Auth-Request messages received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsRARsOut		1.3.6.1.4.1.9.10.133.1.4.1.1.28
Number of Re-Auth-Request messages sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsRAAsIn		1.3.6.1.4.1.9.10.133.1.4.1.1.29
Number of Re-Auth-Answer messages received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsRAAsOut		1.3.6.1.4.1.9.10.133.1.4.1.1.30
Number of Re-Auth-Answer messages sent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsSTRsIn		1.3.6.1.4.1.9.10.133.1.4.1.1.31
Number of Session-Termination-Request messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsSTRsOut		1.3.6.1.4.1.9.10.133.1.4.1.1.32
Number of Session-Termination-Request messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsSTAsIn		1.3.6.1.4.1.9.10.133.1.4.1.1.33
Number of Session-Termination-Answer messages received from the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsSTAsOut		1.3.6.1.4.1.9.10.133.1.4.1.1.34
Number of Session-Termination-Answer messages sent to the peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsDWReqTimer		1.3.6.1.4.1.9.10.133.1.4.1.1.35
Device-Watchdog Request Timer, which is the interval between packets sent to peers.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

cdbpPeerStatsRedirectEvents		1.3.6.1.4.1.9.10.133.1.4.1.1.36
Redirect Event count, which is the number of redirects sent from a peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsAccDupRequests		1.3.6.1.4.1.9.10.133.1.4.1.1.37
The number of duplicate Diameter Accounting-Request packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsMalformedReqsts		1.3.6.1.4.1.9.10.133.1.4.1.1.38
The number of malformed Diameter packets received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsAccsNotRecorded		1.3.6.1.4.1.9.10.133.1.4.1.1.39
The number of Diameter Accounting-Request packets which were received and responded to but not recorded.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsAccRetrans		1.3.6.1.4.1.9.10.133.1.4.1.1.40
The number of Diameter Accounting-Request packets retransmitted to this Diameter server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsTotalRetrans		1.3.6.1.4.1.9.10.133.1.4.1.1.41
The number of Diameter packets retransmitted to this Diameter server, not to include Diameter Accounting-Request packets retransmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsAccPendReqstsOut		1.3.6.1.4.1.9.10.133.1.4.1.1.42
The number of Diameter Accounting-Request packets sent to this peer that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent to this server and decremented due to receipt of an Accounting-Response, a timeout or a retransmission.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

cdbpPeerStatsAccReqstsDropped		1.3.6.1.4.1.9.10.133.1.4.1.1.43
The number of Accounting-Requests to this server that have been dropped.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsHByHDropMessages		1.3.6.1.4.1.9.10.133.1.4.1.1.44
An answer message that is received with an unknown hop-by-hop identifier. Does not include accounting requests dropped.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsEToEDupMessages		1.3.6.1.4.1.9.10.133.1.4.1.1.45
Duplicate answer messages that are to be locally consumed. Does not include duplicate accounting requests received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsUnknownTypes		1.3.6.1.4.1.9.10.133.1.4.1.1.46
The number of Diameter packets of unknown type which were received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsProtocolErrors		1.3.6.1.4.1.9.10.133.1.4.1.1.47
This object represents the Number of protocol errors returned to peer, but not including redirects.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsTransientFailures		1.3.6.1.4.1.9.10.133.1.4.1.1.48
This object represents the transient failure count.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsPermanentFailures		1.3.6.1.4.1.9.10.133.1.4.1.1.49
This object represents the Number of permanent failures returned to peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpPeerStatsTransportDown		1.3.6.1.4.1.9.10.133.1.4.1.1.50
This object represents the Number of unexpected transport failures.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmKnownPeersTable		1.3.6.1.4.1.9.10.133.1.5.1
The table listing the Diameter realms and known peers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CdbpRealmKnownPeersEntry

cdbpRealmKnownPeersEntry		1.3.6.1.4.1.9.10.133.1.5.1.1
A row entry representing a Diameter realm and known peers.
Status: current	Access: not-accessible
OBJECT-TYPE
	CdbpRealmKnownPeersEntry

cdbpRealmKnownPeersIndex		1.3.6.1.4.1.9.10.133.1.5.1.1.1
A number uniquely identifying a peer known to this realm. Upon reload, cdbpRealmKnownPeersIndex values may be changed.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

cdbpRealmKnownPeers		1.3.6.1.4.1.9.10.133.1.5.1.1.2
The index of the peer this realm knows about. This is an ordered list, where the ordering signifies the order in which the peers are tried. Same as the cdbpPeerIndex
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..4294967295

cdbpRealmKnownPeersChosen		1.3.6.1.4.1.9.10.133.1.5.1.1.3
How the realm chooses which peer to send packets to. roundRobin(1) - The peer used for each transaction is selected based on the order in which peers are configured. loadBalance(2) - The peer used for each transaction is based on the load metric (maybe implementation dependent) of all peers defined for the realm, with the least loaded server selected first. firstPreferred(3) - The first defined server is always used for transactions unless failover occurs. mostRecentFirst(4) - The most recently used server is used first for each transaction.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	roundRobin(1), loadBalance(2), firstPreferred(3), mostRecentFirst(4), other(5)

cdbpRealmMessageRouteTable		1.3.6.1.4.1.9.10.133.1.6.1
The table listing the Diameter realm-based message route information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CdbpRealmMessageRouteEntry

cdbpRealmMessageRouteEntry		1.3.6.1.4.1.9.10.133.1.6.1.1
A row entry representing a Diameter realm based message route server.
Status: current	Access: not-accessible
OBJECT-TYPE
	CdbpRealmMessageRouteEntry

cdbpRealmMessageRouteIndex		1.3.6.1.4.1.9.10.133.1.6.1.1.1
A number uniquely identifying each realm.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	1..4294967295

cdbpRealmMessageRouteRealm		1.3.6.1.4.1.9.10.133.1.6.1.1.2
This object represents the realm name
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

cdbpRealmMessageRouteApp		1.3.6.1.4.1.9.10.133.1.6.1.1.3
Application id used to route packets to this realm.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..4294967295

cdbpRealmMessageRouteType		1.3.6.1.4.1.9.10.133.1.6.1.1.4
The types of service supported for each realm application: accounting, authentication or both. acct(1) - accounting auth(2) - authentication both(3) - both accounting and authentication.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	acct(1), auth(2), both(3)

cdbpRealmMessageRouteAction		1.3.6.1.4.1.9.10.133.1.6.1.1.5
The action is used to identify how a message should be treated based on the realm, application and type. local(1) - Diameter messages that resolve to a route entry with the Local Action set to Local can be satisfied locally, and do not need to be routed to another server. relay(2) - All Diameter messages that fall within this category MUST be routed to a next-hop server, without modifying any non-routing AVPs. proxy(3) - All Diameter messages that fall within this category MUST be routed to a next-hop server. redirect(4) - Diameter messages that fall within this category MUST have the identity of the home Diameter server(s) appended, and returned to the sender of the message.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	local(1), relay(2), proxy(3), redirect(4)

cdbpRealmMessageRouteACRsIn		1.3.6.1.4.1.9.10.133.1.6.1.1.6
Number of Accounting-Request messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteACRsOut		1.3.6.1.4.1.9.10.133.1.6.1.1.7
Number of Accounting-Request messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteACAsIn		1.3.6.1.4.1.9.10.133.1.6.1.1.8
Number of Accounting-Answer messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteACAsOut		1.3.6.1.4.1.9.10.133.1.6.1.1.9
Number of Accounting-Answer messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteRARsIn		1.3.6.1.4.1.9.10.133.1.6.1.1.10
Number of Re-Auth-Request messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteRARsOut		1.3.6.1.4.1.9.10.133.1.6.1.1.11
Number of Re-Auth-Request messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteRAAsIn		1.3.6.1.4.1.9.10.133.1.6.1.1.12
Number of Re-Auth-Answer messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteRAAsOut		1.3.6.1.4.1.9.10.133.1.6.1.1.13
Number of Re-Auth-Answer messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteSTRsIn		1.3.6.1.4.1.9.10.133.1.6.1.1.14
Number of Session-Termination-Request messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteSTRsOut		1.3.6.1.4.1.9.10.133.1.6.1.1.15
Number of Session-Termination-Request messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteSTAsIn		1.3.6.1.4.1.9.10.133.1.6.1.1.16
Number of Session-Termination-Answer messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteSTAsOut		1.3.6.1.4.1.9.10.133.1.6.1.1.17
Number of Session-Termination-Answer messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteASRsIn		1.3.6.1.4.1.9.10.133.1.6.1.1.18
Number of Abort-Session-Request messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteASRsOut		1.3.6.1.4.1.9.10.133.1.6.1.1.19
Number of Abort-Session-Request messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteASAsIn		1.3.6.1.4.1.9.10.133.1.6.1.1.20
Number of Abort-Session-Answer messages received from the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteASAsOut		1.3.6.1.4.1.9.10.133.1.6.1.1.21
Number of Abort-Session-Answer messages sent to the realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteAccRetrans		1.3.6.1.4.1.9.10.133.1.6.1.1.22
The number of Diameter accounting packets retransmitted to this realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRouteAccDupReqsts		1.3.6.1.4.1.9.10.133.1.6.1.1.23
The number of duplicate Diameter accounting packets sent to this realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

cdbpRealmMessageRoutePendReqstsOut		1.3.6.1.4.1.9.10.133.1.6.1.1.24
The number of Diameter Accounting-Request packets sent to this peer that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent to this server and decremented due to receipt of an Accounting-Response, a timeout or a retransmission.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

cdbpRealmMessageRouteReqstsDrop		1.3.6.1.4.1.9.10.133.1.6.1.1.25
The number of requests dropped by this realm.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

ciscoDiameterBasePMIBCompliances		1.3.6.1.4.1.9.10.133.2.1
OBJECT IDENTIFIER

ciscoDiameterBasePMIBGroups		1.3.6.1.4.1.9.10.133.2.2
OBJECT IDENTIFIER

ciscoDiameterBasePMIBCompliance		1.3.6.1.4.1.9.10.133.2.1.1
The compliance statement for Diameter Base Protocol entities.
Status: current	Access: read-only
MODULE-COMPLIANCE

ciscoDiameterBasePMIBLocalCfgGroup		1.3.6.1.4.1.9.10.133.2.2.1
A collection of objects providing configuration common to the server.
Status: current	Access: read-only
OBJECT-GROUP

ciscoDiameterBasePMIBPeerCfgGroup		1.3.6.1.4.1.9.10.133.2.2.2
A collection of objects providing configuration of the Diameter peers.
Status: current	Access: read-only
OBJECT-GROUP

ciscoDiameterBasePMIBPeerStatsGroup		1.3.6.1.4.1.9.10.133.2.2.3
A collection of objects providing statistics of the Diameter peers.
Status: current	Access: read-only
OBJECT-GROUP

ciscoDiameterBasePMIBNotificationsGroup		1.3.6.1.4.1.9.10.133.2.2.4
The set of notifications which an agent is required to implement.
Status: current	Access: read-only
NOTIFICATION-GROUP

ciscoDiameterBasePMIBTrapCfgGroup		1.3.6.1.4.1.9.10.133.2.2.5
A collection of objects providing configuration for base protocol notifications.
Status: current	Access: read-only
OBJECT-GROUP

ciscoDiameterBasePMIBLocalCfgSkippedGroup		1.3.6.1.4.1.9.10.133.2.2.6
A collection of objects providing configuration common to the server.
Status: current	Access: read-only
OBJECT-GROUP

ciscoDiameterBasePMIBLocalStatsSkippedGroup		1.3.6.1.4.1.9.10.133.2.2.7
A collection of objects providing statistics common to the server.
Status: current	Access: read-only
OBJECT-GROUP

ciscoDiameterBasePMIBPeerCfgSkippedGroup		1.3.6.1.4.1.9.10.133.2.2.8
A collection of objects providing configuration for Diameter peers.
Status: current	Access: read-only
OBJECT-GROUP

ciscoDiameterBasePMIBPeerStatsSkippedGroup		1.3.6.1.4.1.9.10.133.2.2.9
A collection of objects providing statistics of Diameter peers.
Status: current	Access: read-only
OBJECT-GROUP

ciscoDiameterBasePMIBRealmCfgSkippedGroup		1.3.6.1.4.1.9.10.133.2.2.10
A collection of objects providing configuration for realm message routing.
Status: current	Access: read-only
OBJECT-GROUP

ciscoDiameterBasePMIBRealmStatsSkippedGroup		1.3.6.1.4.1.9.10.133.2.2.11
A collection of objects providing statistics of realm message routing.
Status: current	Access: read-only
OBJECT-GROUP