CISCO-ES-STACK-MIB

File: CISCO-ES-STACK-MIB.mib (82864 bytes)

Imported modules

RFC1155-SMI	RFC-1212	RFC1213-MIB
RFC-1215

Imported symbols

TimeTicks	IpAddress	Counter
Gauge	enterprises	OBJECT-TYPE
DisplayString	sysName	sysLocation
TRAP-TYPE

Defined Types

MacAddr
OCTET STRING	Size(6)

BridgeId
OCTET STRING	Size(8)

CiscoEsTrapRcvrEntry
SEQUENCE
	ciscoEsTrapRcvrIndex	INTEGER
	ciscoEsTrapRcvrStatus	INTEGER
	ciscoEsTrapRcvrIpAddress	IpAddress
	ciscoEsTrapRcvrComm	DisplayString
	ciscoEsTrapRcvrVLANs	OCTET STRING

CiscoEsStackEntry
SEQUENCE
	ciscoEsStackSwitchNumber	INTEGER
	ciscoEsStackSwitchAddr	MacAddr
	ciscoEsStackSwitchFwVersion	DisplayString
	ciscoEsStackSwitchHwVersion	DisplayString
	ciscoEsStackSwitchUptime	TimeTicks
	ciscoEsStackSwitchStatus	INTEGER
	ciscoEsStackSwitchTemperature	INTEGER
	ciscoEsStackSwitchMemory	INTEGER
	ciscoEsStackSwitchProbe	INTEGER
	ciscoEsStackSwitchProbeDirection	INTEGER
	ciscoEsStackSwitchFeatureStatus	INTEGER
	ciscoEsStackSwitchFeatureKey	INTEGER
	ciscoEsStackSwitchPorts	OCTET STRING
	ciscoEsStackSwitchAgingTime	INTEGER
	ciscoEsStackSwitchAgingLevel	INTEGER
	ciscoEsStackSwitchBufferOverruns	Counter
	ciscoEsStackSwitchSoftwareFrames	Counter
	ciscoEsStackSwitchInErrFrames	Counter
	ciscoEsStackSwitchInShortFrames	Counter
	ciscoEsStackSwitchInLongFrames	Counter
	ciscoEsStackSwitchInNoSpaceFrames	Counter
	ciscoEsStackSwitchOutTotalReqs	Counter
	ciscoEsStackSwitchOutTotalFrames	Counter
	ciscoEsStackSwitchOutDroppedFrames	Counter
	ciscoEsStackSwitchLongestHashChain	Gauge
	ciscoEsStackSwitchHashTableFulls	Counter
	ciscoEsStackSwitchId	OBJECT IDENTIFIER
	ciscoEsStackSwitchDplxCtrl	INTEGER

CiscoEsModEntry
SEQUENCE
	ciscoEsModSwitchNumber	INTEGER
	ciscoEsModNumber	INTEGER
	ciscoEsModState	INTEGER
	ciscoEsModType	INTEGER
	ciscoEsModRevision	INTEGER
	ciscoEsModNumPorts	INTEGER
	ciscoEsModUptime	TimeTicks

CiscoEsPortEntry
SEQUENCE
	ciscoEsPortSwitchNumber	INTEGER
	ciscoEsPortNumber	INTEGER
	ciscoEsPortModNumber	INTEGER
	ciscoEsPortIfIndex	INTEGER
	ciscoEsPortDuplex	INTEGER
	ciscoEsPortRcvLocalFrames	Counter
	ciscoEsPortForwardedFrames	Counter
	ciscoEsPortMostStations	Counter
	ciscoEsPortMaxStations	Counter
	ciscoEsPortSWHandledFrames	Counter
	ciscoEsPortLocalStations	Counter
	ciscoEsPortRemoteStations	Counter
	ciscoEsPortUnknownStaFrames	Counter
	ciscoEsPortResetStats	INTEGER
	ciscoEsPortResetTimer	TimeTicks
	ciscoEsPortResetAddrs	INTEGER
	ciscoEsPortInFrames	Counter
	ciscoEsPortOutFrames	Counter
	ciscoEsPortLongFrames	Counter
	ciscoEsPortShortFrames	Counter
	ciscoEsPortInBufOverflows	Counter
	ciscoEsPortOutBufOverflows	Counter
	ciscoEsPortRcvBcasts	Counter
	ciscoEsPortRcvMcasts	Counter
	ciscoEsPortSwitchedFrames	Counter
	ciscoEsPortInOctets	Counter
	ciscoEsPortOutOctets	Counter
	ciscoEsPortPktsInErrors	Counter
	ciscoEsPortLinkState	INTEGER
	ciscoEsPortOprStatus	INTEGER
	ciscoEsPortMdiMdix	INTEGER
	ciscoEsPortHashOverflows	Counter
	ciscoEsPortTableOverflows	Counter
	ciscoEsPortAddrAgingTime	INTEGER
	ciscoEsPortDemandAgingLevel	INTEGER
	ciscoEsPortCfgMode	INTEGER
	ciscoEsPortActiveMode	INTEGER
	ciscoEsPortErrThreshold	INTEGER
	ciscoEsPortLearningState	INTEGER
	ciscoEsPortRuntlessMode	INTEGER
	ciscoEsPortType	INTEGER
	ciscoEsPortCDPTimeToLive	INTEGER
	ciscoEsPortFastPort	INTEGER
	ciscoEsPortISLOperStatus	INTEGER
	ciscoEsPortISLAdminStatus	INTEGER

CiscoEsPortStnEntry
SEQUENCE
	ciscoEsPortStnSwitchNumber	INTEGER
	ciscoEsPortStnPortNum	INTEGER
	ciscoEsPortStnAddress	MacAddr
	ciscoEsPortStnLocation	INTEGER
	ciscoEsPortStnSrcFrames	Counter
	ciscoEsPortStnSrcBytes	Counter
	ciscoEsPortStnDestnFrames	Counter
	ciscoEsPortStnDestnBytes	Counter
	ciscoEsPortStnPortOfExit	OCTET STRING

CiscoEsOptPortStaEntry
SEQUENCE
	ciscoEsOptPortStaPos	INTEGER
	ciscoEsOptPortStaVal	OCTET STRING

CiscoEsVLANPortEntry
SEQUENCE
	ciscoEsVLANPortVLANNumber	INTEGER
	ciscoEsVLANPortSwitchNumber	INTEGER
	ciscoEsVLANPortPorts	OCTET STRING

CiscoEsVLANInfoEntry
SEQUENCE
	ciscoEsVLANInfoVLANNumber	INTEGER
	ciscoEsVLANInfoState	INTEGER
	ciscoEsVLANInfoName	DisplayString
	ciscoEsVLANInfoBaseAddr	MacAddr
	ciscoEsVLANInfoIfIndex	INTEGER
	ciscoEsVLANInfoIpState	INTEGER
	ciscoEsVLANInfoIpAddress	IpAddress
	ciscoEsVLANInfoIpSubnetMask	IpAddress
	ciscoEsVLANInfoIpDefaultGateway	IpAddress
	ciscoEsVLANInfoStp	INTEGER
	ciscoEsVLANInfoNumStations	Gauge
	ciscoEsVLANInfoMaxStations	INTEGER

CiscoEsVLANStpEntry
SEQUENCE
	ciscoEsVLANStpVLANIndex	INTEGER
	ciscoEsVLANStpPriority	INTEGER
	ciscoEsVLANStpTimeSinceTopologyChange	TimeTicks
	ciscoEsVLANStpTopChanges	Counter
	ciscoEsVLANStpDesignatedRoot	BridgeId
	ciscoEsVLANStpRootCost	INTEGER
	ciscoEsVLANStpRootPort	INTEGER
	ciscoEsVLANStpMaxAge	INTEGER
	ciscoEsVLANStpHelloTime	INTEGER
	ciscoEsVLANStpHoldTime	INTEGER
	ciscoEsVLANStpForwardDelay	INTEGER
	ciscoEsVLANStpBridgeMaxAge	INTEGER
	ciscoEsVLANStpBridgeHelloTime	INTEGER
	ciscoEsVLANStpBridgeForwardDelay	INTEGER

CiscoEsVLANStationEntry
SEQUENCE
	ciscoEsVLANStationVLANIndex	INTEGER
	ciscoEsVLANStationBoxNum	INTEGER
	ciscoEsVLANStationAddress	OCTET STRING
	ciscoEsVLANStationPort	INTEGER
	ciscoEsVLANStationTraffic	OCTET STRING

CiscoEsOptVLANStaEntry
SEQUENCE
	ciscoEsOptVLANStaPos	INTEGER
	ciscoEsOptVLANStaVal	OCTET STRING

CiscoEsECEntry
SEQUENCE
	ciscoEsECSwitchNumber	INTEGER
	ciscoEsECNumber	INTEGER
	ciscoEsECPorts	OCTET STRING

CiscoEsFilterEntry
SEQUENCE
	ciscoEsFilterSwitchNumber	INTEGER
	ciscoEsFilterStationAddress	MacAddr
	ciscoEsFilterType	INTEGER
	ciscoEsFilterPorts	OCTET STRING
	ciscoEsFilterMask	OCTET STRING
	ciscoEsFilterRemoteSwitch	INTEGER
	ciscoEsFilterRemotePort	INTEGER
	ciscoEsFilterStatus	INTEGER

CiscoEsRouterEntry
SEQUENCE
	ciscoEsRouterBox	INTEGER
	ciscoEsRouterPort	INTEGER
	ciscoEsRouterOpState	INTEGER
	ciscoEsRouterNetAddr	IpAddress
	ciscoEsRouterBoardId	INTEGER
	ciscoEsRouterRev	INTEGER

Defined Values

cisco		1.3.6.1.4.1.9
OBJECT IDENTIFIER

workgroup		1.3.6.1.4.1.9.5
OBJECT IDENTIFIER

esStack		1.3.6.1.4.1.9.5.14
OBJECT IDENTIFIER

ciscoEsMain		1.3.6.1.4.1.9.5.14.1
OBJECT IDENTIFIER

ciscoEsConfig		1.3.6.1.4.1.9.5.14.1.1
OBJECT IDENTIFIER

ciscoEsStack		1.3.6.1.4.1.9.5.14.2
OBJECT IDENTIFIER

ciscoEsModule		1.3.6.1.4.1.9.5.14.3
OBJECT IDENTIFIER

ciscoEsPort		1.3.6.1.4.1.9.5.14.4
OBJECT IDENTIFIER

ciscoEsDmns		1.3.6.1.4.1.9.5.14.5
OBJECT IDENTIFIER

ciscoEsEChannel		1.3.6.1.4.1.9.5.14.6
OBJECT IDENTIFIER

ciscoEsFilter		1.3.6.1.4.1.9.5.14.7
OBJECT IDENTIFIER

ciscoEsVLANs		1.3.6.1.4.1.9.5.14.8
OBJECT IDENTIFIER

ciscoEsRouter		1.3.6.1.4.1.9.5.14.9
OBJECT IDENTIFIER

ciscoEsIpAddr		1.3.6.1.4.1.9.5.14.1.1.1
The IP address of the current vlan.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ciscoEsNetMask		1.3.6.1.4.1.9.5.14.1.1.2
The subnet mask of the current vlan.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ciscoEsDefaultGateway		1.3.6.1.4.1.9.5.14.1.1.3
IP default gateway of the current vlan.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ciscoEsSysCurTime		1.3.6.1.4.1.9.5.14.1.1.4
Current time at the switch. To set the time use the format yyyy mm dd hh mm ss. All fields are required. Setting this object will reset the time in all the switches in the stack to the new value.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..128)

ciscoEsConfiguration		1.3.6.1.4.1.9.5.14.1.1.5
The stack configuration of the system. A system can exist in three possible configurations. 1. Stand alone mode where the system has only one switch and is not connected to any other switches. 2. Back to Back mode in which a pair of switches are connected back to back through Stack Port. 3. Matrix mode in which the stack has up to eight switches connected to a Matrix through the Stack Port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	stand-alone(1), back-to-back(2), prostack-matrix(3)

ciscoEsNumSwitches		1.3.6.1.4.1.9.5.14.1.1.6
Total number of switches in the stack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsStackStatus		1.3.6.1.4.1.9.5.14.1.1.7
Stack status indicates if the stack is going through the Stack Management Update protocol. Management stations should check this status if they receive a generr on a SET request for any of the stack wide attributes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	running(1), updating(2)

ciscoEsTftpServer		1.3.6.1.4.1.9.5.14.1.1.8
TFTP sever's IP address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ciscoEsTftpServerDomain		1.3.6.1.4.1.9.5.14.1.1.9
VLAN to which the server is connected.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..63

ciscoEsTftpFileLoc		1.3.6.1.4.1.9.5.14.1.1.10
Location of the binary file on the server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..256)

ciscoEsSetLock		1.3.6.1.4.1.9.5.14.1.1.11
This object has not been in use since 2.0 release and there are currently no plans to implement it as defined below. This object when set to the manager's IP address locks out every other manager from doing any SET operations. This lock out expires after a fixed interval of 5 minutes. The Manager holding the lock can renew the lock by doing SET on this object again before the timeout expires otherwise it will contend with other managers trying to lock. The IP Address value should match the IP address that the manager uses to generate the SET request.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ciscoEsProStackMatrixStatus		1.3.6.1.4.1.9.5.14.1.1.12
Active Matrix module in the stack. This object is set to none if the switch is not connected to a Matrix.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	primary(1), secondary(2), none(3), failed(4)

ciscoEsNumMatrixModules		1.3.6.1.4.1.9.5.14.1.1.13
Number of Matrix modules in the stack. This object is set to zero if the switch is not connected to a Matrix.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsLLPortDsbld		1.3.6.1.4.1.9.5.14.1.1.14
This OID is sent out along with the LINK_DOWN Trap only when the port is disabled due to the port security feature (learn and lock). Port could be disabled due to the discovery of invalid MAC address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1)

ciscoEsTrapRcvrTable		1.3.6.1.4.1.9.5.14.1.1.25
Trap Receiver Table for each vlan.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CiscoEsTrapRcvrEntry

ciscoEsTrapRcvrEntry		1.3.6.1.4.1.9.5.14.1.1.25.1
Definition of each row in the vlan specific trap receiver table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CiscoEsTrapRcvrEntry

ciscoEsTrapRcvrIndex		1.3.6.1.4.1.9.5.14.1.1.25.1.1
Trap receiver index for each entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..20

ciscoEsTrapRcvrStatus		1.3.6.1.4.1.9.5.14.1.1.25.1.2
Setting the value of this object to invalid(3) deletes the row from the table. The value invalid(3) should never be returned on a GET. Setting this value to create(4) causes a new row to be created if the row does not already exist. To create a new row set ciscoEsTrapRcvrStatus to create(4) and ciscoEsTrapRcvrIndex to any valid index which does not already exist. The value returned on GETs should be valid(2) or other(1), which is used to indicate any other condition.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), valid(2), invalid(3), create(4)

ciscoEsTrapRcvrIpAddress		1.3.6.1.4.1.9.5.14.1.1.25.1.3
IP address for an SNMP manager that is to receive the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ciscoEsTrapRcvrComm		1.3.6.1.4.1.9.5.14.1.1.25.1.4
Community string to use.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..16)

ciscoEsTrapRcvrVLANs		1.3.6.1.4.1.9.5.14.1.1.25.1.5
VLANs to which traps to this target are sent out on. Each octet within the value of this object specifies a set of eight vlans, with the first octet specifying vlans 0 through 7, the second octet specifying vlans 8 through 15, etc. Within each octet, the most significant bit represents the lowest numbered vlan, and the least significant bit represents the highest numbered vlan. Thus, each vlan of the stack is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is included in the set of ports; the vlan is not included if its bit has a value of '0'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(128)

ciscoEsStackTable		1.3.6.1.4.1.9.5.14.2.1
Stack information table. This table provides the current configuration of the stack. It also provides a mapping of Switch Numbers to their addresses. The Management Application is required to retrieve this table and verify its own view of the stack periodically and/or when it receives a trap indicating a change in the stack configuration.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CiscoEsStackEntry

ciscoEsStackEntry		1.3.6.1.4.1.9.5.14.2.1.1
Definition of each row in the Stack Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CiscoEsStackEntry

ciscoEsStackSwitchNumber		1.3.6.1.4.1.9.5.14.2.1.1.1
Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

ciscoEsStackSwitchAddr		1.3.6.1.4.1.9.5.14.2.1.1.2
Mac address of the switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	MacAddr

ciscoEsStackSwitchFwVersion		1.3.6.1.4.1.9.5.14.2.1.1.3
Version number for the firmware running on the switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..128)

ciscoEsStackSwitchHwVersion		1.3.6.1.4.1.9.5.14.2.1.1.4
Hardware version number for the switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..128)

ciscoEsStackSwitchUptime		1.3.6.1.4.1.9.5.14.2.1.1.6
Time ticks since the switch was last reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ciscoEsStackSwitchStatus		1.3.6.1.4.1.9.5.14.2.1.1.7
Operational status of the box. Setting this value to either coldReset (2) or warmReset (3) will cause cold start or warm start to occur after a specific time delay.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	running(1), coldReset(2), warmReset(3)

ciscoEsStackSwitchTemperature		1.3.6.1.4.1.9.5.14.2.1.1.8
Temperature status of each switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), toohigh(2), unknown(3)

ciscoEsStackSwitchMemory		1.3.6.1.4.1.9.5.14.2.1.1.9
Installed memory on the switch in MB.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsStackSwitchProbe		1.3.6.1.4.1.9.5.14.2.1.1.10
Port number to be monitored through the SwitchProbe. Setting this object to zero turns off SwitchProbe.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..32

ciscoEsStackSwitchProbeDirection		1.3.6.1.4.1.9.5.14.2.1.1.11
Direction of traffic to monitor on the SwitchProbe.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	transmit(1), receive(2), both(3), none(4)

ciscoEsStackSwitchFeatureStatus		1.3.6.1.4.1.9.5.14.2.1.1.12
This object indicates whether the switch is enabled to support enhanced features.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	standard(1), enhanced(2), unknown(3)

ciscoEsStackSwitchFeatureKey		1.3.6.1.4.1.9.5.14.2.1.1.13
Feature key to enable enhanced features.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ciscoEsStackSwitchPorts		1.3.6.1.4.1.9.5.14.2.1.1.14
A bit mask representing all the ports present in this switch. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

ciscoEsStackSwitchAgingTime		1.3.6.1.4.1.9.5.14.2.1.1.15
Aging time in minutes for the master address table entries on this switch.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..9999

ciscoEsStackSwitchAgingLevel		1.3.6.1.4.1.9.5.14.2.1.1.16
Threshold to demand age the master address table. All numbers refer to percentage of the address table. The only values accepted by the agent are 50,60,70,80,90 and 0. Setting the value to 0 disables demand aging.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..90

ciscoEsStackSwitchBufferOverruns		1.3.6.1.4.1.9.5.14.2.1.1.17
Number of times the switch was out of buffers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsStackSwitchSoftwareFrames		1.3.6.1.4.1.9.5.14.2.1.1.18
Total number of frames sent to the CPU on this switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsStackSwitchInErrFrames		1.3.6.1.4.1.9.5.14.2.1.1.19
Total number of frames in error on this switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsStackSwitchInShortFrames		1.3.6.1.4.1.9.5.14.2.1.1.20
Total number of frames which were too short received on this switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsStackSwitchInLongFrames		1.3.6.1.4.1.9.5.14.2.1.1.21
Total number of frames which were too long received on this switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsStackSwitchOutDroppedFrames		1.3.6.1.4.1.9.5.14.2.1.1.22
Total number of received frames dropped by switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsStackSwitchInNoSpaceFrames		1.3.6.1.4.1.9.5.14.2.1.1.23
Number of times incoming frames had to be dropped because of no more memory available.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsStackSwitchOutTotalReqs		1.3.6.1.4.1.9.5.14.2.1.1.24
Total number of requests made by the CPU to send out a frame.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsStackSwitchOutTotalFrames		1.3.6.1.4.1.9.5.14.2.1.1.25
Total number of frames sent out from this switch requested by the CPU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsStackSwitchLongestHashChain		1.3.6.1.4.1.9.5.14.2.1.1.26
The length of the longest hash chain in the CPU hash table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ciscoEsStackSwitchHashTableFulls		1.3.6.1.4.1.9.5.14.2.1.1.27
Total number of times the hash table was full when trying to add an entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsStackSwitchId		1.3.6.1.4.1.9.5.14.2.1.1.28
The switch Id used to uniquely identify the kind of the cisco ethernet switch.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

ciscoEsStackSwitchDplxCtrl		1.3.6.1.4.1.9.5.14.2.1.1.29
Control of setting the ports to full or half duplex.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	hardware(1), software(2)

ciscoEsModTable		1.3.6.1.4.1.9.5.14.3.1
Module configuration table. Each EtherSwitch the set of 10 MB Ports is considered as slot 1. Each additional card which plugs into the system is numbered based on where the card is plugged into.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CiscoEsModEntry

ciscoEsModEntry		1.3.6.1.4.1.9.5.14.3.1.1
Definition of each row in the Module Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CiscoEsModEntry

ciscoEsModSwitchNumber		1.3.6.1.4.1.9.5.14.3.1.1.1
Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

ciscoEsModNumber		1.3.6.1.4.1.9.5.14.3.1.1.2
The module number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

ciscoEsModState		1.3.6.1.4.1.9.5.14.3.1.1.3
The state indicates the current operational state of the module.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	nomodule(1), running(2), stopped(3), faulty(4)

ciscoEsModType		1.3.6.1.4.1.9.5.14.3.1.1.4
The type of module plugged in to the slot. Module type system (1) represents the mother board with the CPU and system memory. In RSM the system module always occupies slot 2. Module state none (6) represents a slot with no modules plugged in (indicated by ciscoEsModState).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	system(1), ws-X3004(2), ws-X3001(3), ws-X3005(4), ws-X3002(5), ws-X3013(6), ws-X3003(7), ws-X3006(8), unknown(9), none(10), ws-X3007-8(11), ws-X3009(12), ws-X3010(13), ws-X3011(14)

ciscoEsModRevision		1.3.6.1.4.1.9.5.14.3.1.1.5
The module revision number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsModNumPorts		1.3.6.1.4.1.9.5.14.3.1.1.6
Total number of ports in the module.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsModUptime		1.3.6.1.4.1.9.5.14.3.1.1.7
Time in 1/100 seconds since the module was last reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ciscoEsPortTable		1.3.6.1.4.1.9.5.14.4.1
A table of information about each port. For Cisco ports only the following Counters are valid: ciscoEsPortInFrames ciscoEsPortOutFrames ciscoEsPortInOctets ciscoEsPortOutOctets ciscoEsPortLongFrames ciscoEsPortShortFrames ciscoEsPortSWHandledFrames ciscoEsPortInBufOverflows ciscoEsPortOutBufOverflows ciscoEsPortPktsInErrors ciscoEsPortForwardedFrames All other Counters will return 0 for such ports.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CiscoEsPortEntry

ciscoEsPortEntry		1.3.6.1.4.1.9.5.14.4.1.1
Definition of rows in the port table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CiscoEsPortEntry

ciscoEsPortSwitchNumber		1.3.6.1.4.1.9.5.14.4.1.1.1
Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

ciscoEsPortNumber		1.3.6.1.4.1.9.5.14.4.1.1.2
A unique value for each port entry. The value corresponds the port number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..32

ciscoEsPortModNumber		1.3.6.1.4.1.9.5.14.4.1.1.3
Module number of the module that contains this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

ciscoEsPortIfIndex		1.3.6.1.4.1.9.5.14.4.1.1.4
A pointer to the entry in the ifTable corresponding to this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsPortDuplex		1.3.6.1.4.1.9.5.14.4.1.1.5
Indicates whether the port is jumper configured for full or half duplex operation. Note: internal connected ports are always halfDuplex(2).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	fullDuplex(1), halfDuplex(2)

ciscoEsPortRcvLocalFrames		1.3.6.1.4.1.9.5.14.4.1.1.6
Number of frames received where the destination is on this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortForwardedFrames		1.3.6.1.4.1.9.5.14.4.1.1.7
Number of frames received on this port and forwarded to another port or the system module for processing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortMostStations		1.3.6.1.4.1.9.5.14.4.1.1.8
Highest number of stations ever active at any time since the last reset of the switch as seen by this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortMaxStations		1.3.6.1.4.1.9.5.14.4.1.1.9
Maximum number of stations which the port can support simultaneously.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortSWHandledFrames		1.3.6.1.4.1.9.5.14.4.1.1.10
Number of Frames received on this port and delivered to the system module for processing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortLocalStations		1.3.6.1.4.1.9.5.14.4.1.1.11
Number of stations on this port which belong to the local segment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortRemoteStations		1.3.6.1.4.1.9.5.14.4.1.1.12
Number of stations on this port which belong to another segment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortUnknownStaFrames		1.3.6.1.4.1.9.5.14.4.1.1.13
Number of unicast frames received on this port and forwarded to the system module for processing because the source or destination station address is not in the port's forwarding table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortResetStats		1.3.6.1.4.1.9.5.14.4.1.1.14
Setting this object to reset(3) causes all traffic counters for this port to be set to zero. Also the value of ciscoEsPortResetTimer is set to zero.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), running(2), reset(3)

ciscoEsPortResetTimer		1.3.6.1.4.1.9.5.14.4.1.1.15
Time (in 100th second ticks) since the port counters were reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ciscoEsPortResetAddrs		1.3.6.1.4.1.9.5.14.4.1.1.16
Setting this object to reset(3) clears all address table entries for this port as well as setting all port traffic counters to zero and setting ciscoEsPortResetTimer to zero.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), running(2), reset(3)

ciscoEsPortInFrames		1.3.6.1.4.1.9.5.14.4.1.1.17
Total Number of Frames received on this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortOutFrames		1.3.6.1.4.1.9.5.14.4.1.1.18
Total Number of Frames transmitted by this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortLongFrames		1.3.6.1.4.1.9.5.14.4.1.1.19
Total Number of Frames received on this port which were too long.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortShortFrames		1.3.6.1.4.1.9.5.14.4.1.1.20
Total Number of Frames received on this port which were too short.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortInBufOverflows		1.3.6.1.4.1.9.5.14.4.1.1.21
Total Number of Frames received on this port which caused a receive buffer overflow.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortOutBufOverflows		1.3.6.1.4.1.9.5.14.4.1.1.22
Total Number of Frames which could not be transmitted from this port because of transmit buffer overflow.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortRcvBcasts		1.3.6.1.4.1.9.5.14.4.1.1.23
Number of Broadcast Frames received on this port without errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortRcvMcasts		1.3.6.1.4.1.9.5.14.4.1.1.24
Number of Multicast Frames received on this port without errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortSwitchedFrames		1.3.6.1.4.1.9.5.14.4.1.1.25
Number of frames switched on this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortInOctets		1.3.6.1.4.1.9.5.14.4.1.1.26
Total number of octets received through this port. This counter is the same as the ifInOctets counter in ifTable corresponding to this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortOutOctets		1.3.6.1.4.1.9.5.14.4.1.1.27
Total number of octets transmitted from this port. This counter is the same as the ifOutOctets counter in ifTable corresponding to this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortPktsInErrors		1.3.6.1.4.1.9.5.14.4.1.1.28
Total number of packets received or transmitted from this port and there was an error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortLinkState		1.3.6.1.4.1.9.5.14.4.1.1.29
Link state of the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

ciscoEsPortOprStatus		1.3.6.1.4.1.9.5.14.4.1.1.30
Operational status of the port. Failed is returned when the the port fails power-on diagnostic tests.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2), failed(3)

ciscoEsPortMdiMdix		1.3.6.1.4.1.9.5.14.4.1.1.31
Indicates whether the port is configured as MDI or MDIX or none (meaning not applicable). This object is also used to show the termination status for 10Base2 type ports.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	mdi(1), mdix(2), none(3), internal-term-on(4), internal-term-off(5)

ciscoEsPortHashOverflows		1.3.6.1.4.1.9.5.14.4.1.1.32
Number of times a hash bucket was full when trying to add an entry to the port address table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortTableOverflows		1.3.6.1.4.1.9.5.14.4.1.1.33
Number of times the address table was full when trying to add an entry to the port address table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortAddrAgingTime		1.3.6.1.4.1.9.5.14.4.1.1.34
Port level address aging time in minutes. Setting this object to zero disables address aging.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..9999

ciscoEsPortDemandAgingLevel		1.3.6.1.4.1.9.5.14.4.1.1.35
Threshold to demand age the port address table. All numbers refer to percentage of the address table. The only values accepted by the agent are 50,60,70,80,90 and 0. Setting the value to 0 disables demand aging.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..90

ciscoEsPortCfgMode		1.3.6.1.4.1.9.5.14.4.1.1.36
Set bridging mode for the port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ieee8021d(1), cutthru(2), auto(3)

ciscoEsPortActiveMode		1.3.6.1.4.1.9.5.14.4.1.1.37
Operational bridging mode for the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ieee8021d(1), cutthru(2), unknown(3)

ciscoEsPortErrThreshold		1.3.6.1.4.1.9.5.14.4.1.1.38
Threshold error rate when the port moves from cut-through to store and forward mode.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

ciscoEsPortLearningState		1.3.6.1.4.1.9.5.14.4.1.1.39
Configure learning state on this port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), disableSrcLearning(2), disableDstnLearning(3), disableLearning(4)

ciscoEsPortRuntlessMode		1.3.6.1.4.1.9.5.14.4.1.1.40
Turn on/off runtless filtering on this port. When this this mode is turned on, no runts will be forwarded.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	on(1), off(2)

ciscoEsPortType		1.3.6.1.4.1.9.5.14.4.1.1.41
Type of port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	type-10BaseT(1), type-StkPort(2), type-100BaseT(3), type-100BaseFx(4), type-10BaseT-4(5), type-10Base2(6), type-10BaseFL(7), type-ATM155(8), unknown(9), type-100VG-Fx(10), type-100VG-Tx(11), type-ISL-FX(12), type-ISL-TX(13), type-R2503(14)

ciscoEsPortCDPTimeToLive		1.3.6.1.4.1.9.5.14.4.1.1.42
The advertised time-to-live parameter on all CDP messages generated by this switch on this vlan.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

ciscoEsPortFastPort		1.3.6.1.4.1.9.5.14.4.1.1.43
Indicates whether the port is enable or disable for fast port support. When fast port is enable, port state will go to forwarding as soon as the link is up.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disable(1), enable(2)

ciscoEsPortISLOperStatus		1.3.6.1.4.1.9.5.14.4.1.1.44
The current operational mode for an ISL port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	trunking(1), non-trunking(2)

ciscoEsPortISLAdminStatus		1.3.6.1.4.1.9.5.14.4.1.1.45
Used to configure the DISL modes for an ISL trunk port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	on(1), off(2), desirable(3), auto(4)

ciscoEsPortStnTable		1.3.6.1.4.1.9.5.14.4.3
Port station table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CiscoEsPortStnEntry

ciscoEsPortStnEntry		1.3.6.1.4.1.9.5.14.4.3.1
Definition of the Conceptual row in the Port station table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CiscoEsPortStnEntry

ciscoEsPortStnSwitchNumber		1.3.6.1.4.1.9.5.14.4.3.1.1
Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

ciscoEsPortStnPortNum		1.3.6.1.4.1.9.5.14.4.3.1.2
Port number corresponding to this entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsPortStnAddress		1.3.6.1.4.1.9.5.14.4.3.1.3
Station MAC address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	MacAddr

ciscoEsPortStnLocation		1.3.6.1.4.1.9.5.14.4.3.1.4
Where the station is located.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	local(1), remote(2)

ciscoEsPortStnSrcFrames		1.3.6.1.4.1.9.5.14.4.3.1.5
Number of frames with this station as the source.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortStnSrcBytes		1.3.6.1.4.1.9.5.14.4.3.1.6
Number of Bytes with this station as the source.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortStnDestnFrames		1.3.6.1.4.1.9.5.14.4.3.1.7
Number of frames with this station as the destination.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortStnDestnBytes		1.3.6.1.4.1.9.5.14.4.3.1.8
Number of bytes with this station as the destination.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsPortStnPortOfExit		1.3.6.1.4.1.9.5.14.4.3.1.9
A bit string that identifies the ports that frames destined to this address are forwarded to when received on this port. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

ciscoEsOptPortStaTable		1.3.6.1.4.1.9.5.14.4.2
A table of station addresses known at an individual port. This table is designed to reduce the number of SNMP GETNEXT requests. This is done by packing many values into an octet string. (The maximum size frame should be used to return the result.) The instance returned for a GETNEXT is the value that identifies the last 'row' in the octet string. When the table is completely retrieved with one or more GETNEXTs, duplicate entries may be present, and entries may be skipped if the table is changing while being retrieved.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CiscoEsOptPortStaEntry

ciscoEsOptPortStaEntry		1.3.6.1.4.1.9.5.14.4.2.1
Definition of the rows in the optimized port station address table. Rows can not be created or deleted via SNMP requests.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CiscoEsOptPortStaEntry

ciscoEsOptPortStaPos		1.3.6.1.4.1.9.5.14.4.2.1.1
Third index for items in the optimized port station address table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ciscoEsOptPortStaVal		1.3.6.1.4.1.9.5.14.4.2.1.2
An OCTET STRING containing a multiple number of stations from a port station address table. Each entry is encoded in the following format: Station MAC address - 6 octets Location 1 - local 2 - remote - 1 octet Port of exit Mask - 4 octets Source Frame Count - 4 octets (integer in little endian) Destn Frame Count - 4 octets (integer in little endian) Source Byte Count - 4 octets (integer in little endian) Destn Byte Count - 4 octets (integer in little endian) The Port of exit mask is encoded in its raw form as stored in the switch. Octet 1 Bit position 7 6 5 4 3 2 1 0 Port Number 31 30 29 28 27 26 25 24 Octet 2 Bit position 7 6 5 4 3 2 1 0 Port Number 23 22 21 20 19 18 17 16 Octet 3 Bit position 7 6 5 4 3 2 1 0 Port Number 15 14 13 12 11 10 9 8 Octet 4 Bit position 7 6 5 4 3 2 1 0 Port Number 7 6 5 4 3 2 1 CPU
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ciscoEsVLANPortTable		1.3.6.1.4.1.9.5.14.8.1
VLAN configuration table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CiscoEsVLANPortEntry

ciscoEsVLANPortEntry		1.3.6.1.4.1.9.5.14.8.1.1
Definition of each row in the vlan Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CiscoEsVLANPortEntry

ciscoEsVLANPortVLANNumber		1.3.6.1.4.1.9.5.14.8.1.1.1
VLAN identifier for this row.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..63

ciscoEsVLANPortSwitchNumber		1.3.6.1.4.1.9.5.14.8.1.1.2
Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

ciscoEsVLANPortPorts		1.3.6.1.4.1.9.5.14.8.1.1.3
The set of ports in this switch which belong to this VLAN. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

ciscoEsVLANInfoTable		1.3.6.1.4.1.9.5.14.8.2
VLAN Information table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CiscoEsVLANInfoEntry

ciscoEsVLANInfoEntry		1.3.6.1.4.1.9.5.14.8.2.1
Definition of each row in the vlan Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CiscoEsVLANInfoEntry

ciscoEsVLANInfoVLANNumber		1.3.6.1.4.1.9.5.14.8.2.1.1
VLAN identifier for this row.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..63

ciscoEsVLANInfoState		1.3.6.1.4.1.9.5.14.8.2.1.2
Current state of the vlan. If a vlan has at least one port, it is considered active (1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

ciscoEsVLANInfoName		1.3.6.1.4.1.9.5.14.8.2.1.3
User defined name of the vlan.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ciscoEsVLANInfoBaseAddr		1.3.6.1.4.1.9.5.14.8.2.1.4
The MAC address assigned to this vlan. This address is the MAC address of the lowest numbered port in the vlan.
Status: mandatory	Access: read-only
OBJECT-TYPE
	MacAddr

ciscoEsVLANInfoIfIndex		1.3.6.1.4.1.9.5.14.8.2.1.5
The ifIndex of the interface entry corresponding to each vlan.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsVLANInfoIpState		1.3.6.1.4.1.9.5.14.8.2.1.6
IP configuration for this vlan.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), auto-bootp(2), always-bootp(3)

ciscoEsVLANInfoIpAddress		1.3.6.1.4.1.9.5.14.8.2.1.7
IP Address assigned to this vlan. Changes to the IP Address of the vlan to which the management station belongs cause loss of connectivity until the management station updates its information about the IP Address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ciscoEsVLANInfoIpSubnetMask		1.3.6.1.4.1.9.5.14.8.2.1.8
The subnet mask for this vlan.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ciscoEsVLANInfoIpDefaultGateway		1.3.6.1.4.1.9.5.14.8.2.1.9
The IP Address of the default gateway for this VLAN.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

ciscoEsVLANInfoStp		1.3.6.1.4.1.9.5.14.8.2.1.10
Turn Spanning tree on or off.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	on(1), off(2)

ciscoEsVLANInfoNumStations		1.3.6.1.4.1.9.5.14.8.2.1.11
Number of local stations (nodes) in the vlan.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ciscoEsVLANInfoMaxStations		1.3.6.1.4.1.9.5.14.8.2.1.12
Aggregate of the highest number of local stations (nodes) in the vlan calculated separately on each box.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsVLANStpTable		1.3.6.1.4.1.9.5.14.8.3
Spanning tree information table for each vlan.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CiscoEsVLANStpEntry

ciscoEsVLANStpEntry		1.3.6.1.4.1.9.5.14.8.3.1
Definition of each row in the vlan specific spanning tree information table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CiscoEsVLANStpEntry

ciscoEsVLANStpVLANIndex		1.3.6.1.4.1.9.5.14.8.3.1.1
Integer reference to the vlan number in the vlan table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..63

ciscoEsVLANStpPriority		1.3.6.1.4.1.9.5.14.8.3.1.2
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of ciscoEsVLANBaseBridgeAddress. The bridge ID corresponds to the particular instance of spanning tree running in this vlan
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

ciscoEsVLANStpTimeSinceTopologyChange		1.3.6.1.4.1.9.5.14.8.3.1.3
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ciscoEsVLANStpTopChanges		1.3.6.1.4.1.9.5.14.8.3.1.4
The total number of topology changes detected by this vlan since the management entity was last reset or initialized.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ciscoEsVLANStpDesignatedRoot		1.3.6.1.4.1.9.5.14.8.3.1.5
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this vlan.
Status: mandatory	Access: read-only
OBJECT-TYPE
	BridgeId

ciscoEsVLANStpRootCost		1.3.6.1.4.1.9.5.14.8.3.1.6
The cost of the path to the root as seen from this vlan.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsVLANStpRootPort		1.3.6.1.4.1.9.5.14.8.3.1.7
The port number of the port which offers the lowest cost path from this vlan to the root bridge.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsVLANStpMaxAge		1.3.6.1.4.1.9.5.14.8.3.1.8
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this vlan is currently using.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsVLANStpHelloTime		1.3.6.1.4.1.9.5.14.8.3.1.9
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this vlan is currently using.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsVLANStpHoldTime		1.3.6.1.4.1.9.5.14.8.3.1.10
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this vlan, in units of hundredths of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsVLANStpForwardDelay		1.3.6.1.4.1.9.5.14.8.3.1.11
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this vlan is currently using, in contrast to ciscoEsVLANStpBridgeForwardDelay which is the value that this vlan and all others would start using if/when this vlan were to become the root.]
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsVLANStpBridgeMaxAge		1.3.6.1.4.1.9.5.14.8.3.1.12
The value that all bridges use for MaxAge when this vlan is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of ciscoEsVLANStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	600..4000

ciscoEsVLANStpBridgeHelloTime		1.3.6.1.4.1.9.5.14.8.3.1.13
The value that all bridges use for HelloTime when this vlan is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	100..1000

ciscoEsVLANStpBridgeForwardDelay		1.3.6.1.4.1.9.5.14.8.3.1.14
The value that all bridges use for ForwardDelay when this vlan is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of ciscoEsVLANStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	400..3000

ciscoEsVLANStationTable		1.3.6.1.4.1.9.5.14.8.4
Stations seen in each vlan.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CiscoEsVLANStationEntry

ciscoEsVLANStationEntry		1.3.6.1.4.1.9.5.14.8.4.1
Definition of each row in the vlan specific station table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CiscoEsVLANStationEntry

ciscoEsVLANStationVLANIndex		1.3.6.1.4.1.9.5.14.8.4.1.1
Integer reference to the vlan number in the vlan table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..63

ciscoEsVLANStationBoxNum		1.3.6.1.4.1.9.5.14.8.4.1.2
Integer reference to the switch number on which the table entry resides.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

ciscoEsVLANStationAddress		1.3.6.1.4.1.9.5.14.8.4.1.3
The Station's MAC address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ciscoEsVLANStationPort		1.3.6.1.4.1.9.5.14.8.4.1.4
The source port for the Station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsVLANStationTraffic		1.3.6.1.4.1.9.5.14.8.4.1.5
A bit string that identifies with value of one of the ports that this station has generated traffic to or from. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

ciscoEsOptVLANStaTable		1.3.6.1.4.1.9.5.14.8.5
A table of station addresses known at an individual port. This table is designed to reduce the number of SNMP GETNEXT requests. This is done by packing many values into an octet string. (The maximum size frame should be used to return the result.) The instance returned for a GETNEXT is the value that identifies the last 'row' in the octet string. When the table is completely retrieved with one or more GETNEXTs, duplicate entries may be present, and entries may be skipped if the table is changing while being retrieved.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CiscoEsOptVLANStaEntry

ciscoEsOptVLANStaEntry		1.3.6.1.4.1.9.5.14.8.5.1
Definition of the rows in the optimized port station address table. Rows can not be created or deleted via SNMP requests.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CiscoEsOptVLANStaEntry

ciscoEsOptVLANStaPos		1.3.6.1.4.1.9.5.14.8.5.1.1
Third index for items in the optimized port station address table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ciscoEsOptVLANStaVal		1.3.6.1.4.1.9.5.14.8.5.1.2
An OCTET STRING containing a multiple number of stations from the vlan station address table. Each entry is encoded in the following format: Station MAC address - 6 octets Port of Entry - 1 octet Traffic Mask - 4 octets The traffic mask is encoded in its raw form as stored in the switch. Octet 1 Bit position 7 6 5 4 3 2 1 0 Port Number 31 30 29 28 27 26 25 24 Octet 2 Bit position 7 6 5 4 3 2 1 0 Port Number 23 22 21 20 19 18 17 16 Octet 3 Bit position 7 6 5 4 3 2 1 0 Port Number 15 14 13 12 11 10 9 8 Octet 4 Bit position 7 6 5 4 3 2 1 0 Port Number 7 6 5 4 3 2 1 CPU
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ciscoEsTransitedConfiguredVLANs		1.3.6.1.4.1.9.5.14.8.6
A string of octets containing one bit per VLAN in the management domain. The first octet corresponds to VLANs with VlanIndex 1 through 8; the second octet to VLANs 9 through 16; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. If the bit correspond to a VLAN is set to '1', then the VLAN is a configured transited VLAN on the local device. (Default VLANs which must transit the local device are always considered to be 'configured transited VLANs'.) Any attempt to set a bit string which has: more bits set than the local device can transit; or does not have all bits set corresponding to default VLANs which must transit the device; or set any bits corresponding to non-existant VLANs (VLANs whose IDs are not defined in the management domain) will be completely rejected as an illegal value.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(128)

ciscoEsTransitedVLANs		1.3.6.1.4.1.9.5.14.8.7
A string of octets containing one bit per VLAN in the management domain. The first octet corresponds to VLANs with VlanIndex 1 through 8; the second octet to VLANs 9 through 16; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. If the bit corresponding to a VLAN is set to '1', then the VLAN transits the local device either because it was configured to or because it was selected to automatically by the selection algorithm.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(128)

ciscoEsECTable		1.3.6.1.4.1.9.5.14.6.1
The EtherChannel table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CiscoEsECEntry

ciscoEsECEntry		1.3.6.1.4.1.9.5.14.6.1.1
Definition of each row in the EtherChannel table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CiscoEsECEntry

ciscoEsECSwitchNumber		1.3.6.1.4.1.9.5.14.6.1.1.1
Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

ciscoEsECNumber		1.3.6.1.4.1.9.5.14.6.1.1.2
The EtherChannel number for this row.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

ciscoEsECPorts		1.3.6.1.4.1.9.5.14.6.1.1.3
The set of ports in this switch which are active in this EtherChannel. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

ciscoEsFilterTable		1.3.6.1.4.1.9.5.14.7.1
Filters set up in the switch.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CiscoEsFilterEntry

ciscoEsFilterEntry		1.3.6.1.4.1.9.5.14.7.1.1
Definition of each row in the filter table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CiscoEsFilterEntry

ciscoEsFilterSwitchNumber		1.3.6.1.4.1.9.5.14.7.1.1.1
Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

ciscoEsFilterStationAddress		1.3.6.1.4.1.9.5.14.7.1.1.2
The destination MAC address in a frame to which this entry's filtering information applies.
Status: mandatory	Access: read-only
OBJECT-TYPE
	MacAddr

ciscoEsFilterType		1.3.6.1.4.1.9.5.14.7.1.1.3
There are two types of filters (i) source filters which act on the source address portion of a packet and (ii) destination filters which act on the destination address portion of a packet.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	source-filter(1), destination-filter(2)

ciscoEsFilterPorts		1.3.6.1.4.1.9.5.14.7.1.1.4
The set of ports to which this filter is applied. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

ciscoEsFilterMask		1.3.6.1.4.1.9.5.14.7.1.1.5
The filter mask for this station. The semantics of the filter mask depend on the type of filter. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

ciscoEsFilterRemoteSwitch		1.3.6.1.4.1.9.5.14.7.1.1.6
In case of destination filters you can specify a particular port in a remote box as the destination port for a given station address. A value of 0 indicates no remote switch is configured.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..8

ciscoEsFilterRemotePort		1.3.6.1.4.1.9.5.14.7.1.1.7
In case of destination filters you can specify a particular port in a remote box as the destination port for a given station address. A value of 0 indicates no remote ports assigned.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..29

ciscoEsFilterStatus		1.3.6.1.4.1.9.5.14.7.1.1.8
GET request always returns valid (1). Set this object to invalid (2) to delete an entry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	valid(1), invalid(2)

ciscoEsRouterTable		1.3.6.1.4.1.9.5.14.9.1
Router Port information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CiscoEsRouterEntry

ciscoEsRouterEntry		1.3.6.1.4.1.9.5.14.9.1.1
Definition of each row in the Router Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CiscoEsRouterEntry

ciscoEsRouterBox		1.3.6.1.4.1.9.5.14.9.1.1.1
Index into the router table row.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

ciscoEsRouterPort		1.3.6.1.4.1.9.5.14.9.1.1.2
Index into the router table column.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsRouterOpState		1.3.6.1.4.1.9.5.14.9.1.1.3
GET request returns up (1) down(2) for operation state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2), empty(3), unknown(4)

ciscoEsRouterNetAddr		1.3.6.1.4.1.9.5.14.9.1.1.4
The IP address of the router.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

ciscoEsRouterBoardId		1.3.6.1.4.1.9.5.14.9.1.1.5
The Board Id of the router.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsRouterRev		1.3.6.1.4.1.9.5.14.9.1.1.6
The Board Rev of the router.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ciscoEsStackCfgChange		1
This trap is generated when there is a change in the stack configuration i.e. when either a new switch is added to the stack or a switch leaves a stack. ciscoEsNumSwitches indicates the current number of switches which are part of the stack. The management station has to update its stack information according to the stack table.
TRAP-TYPE

ciscoEsStackProStackMatrixChange		2
This trap is generated when the stack switches over from primary to secondary Matrix or from secondary back to primary Matrix.
TRAP-TYPE

ciscoEsStackTempChange		1
This trap is generated when the temperature in a switch exceeds normal or returns to normal.
TRAP-TYPE

ciscoEsPortStrNFwdEntry		1
This trap is generated when a port automatically enters store and forward mode when the error rate exceeds the threshold.
TRAP-TYPE

ciscoEsVLANNewRoot		1
This trap is a vlan specific version of the newRoot trap as described in RFC1493. The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer immediately subsequent to its election. Implementation of this trap is optional.
TRAP-TYPE

ciscoEsVLANTopologyChange		2
This trap is a vlan specific version of the topologyChange trap as described in RFC1493. A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.
TRAP-TYPE

ciscoEsEtherChannelFailed		1
This trap is sent when one of the links in an EtherChannel fail. The variable ciscoEsECPorts contains the ports which are operational in the EtherChannel.
TRAP-TYPE