CISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB

File: CISCO-LWAPP-DOT11-CLIENT-CCXV5-REPORTING-MIB.mib (77018 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
CISCO-LWAPP-DOT11-CLIENT-MIB	CISCO-TC	CISCO-SMI
CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Unsigned32
IpAddress	Integer32	MODULE-COMPLIANCE
OBJECT-GROUP	DisplayString	TEXTUAL-CONVENTION
MacAddress	cldcClientMacAddress	ciscoLwappDot11ClientCcxMIBObjects
CvE164Address	ciscoMgmt	CiscoLwappDot11ClientReqStatus
CiscoLwappDot11ClientSSId	CiscoLwappDot11ClientAuthMethod	CiscoLwappDot11ClientEAPMethod
CiscoLwappDot11ClientKeyMgmtMethod	CiscoLwappDot11ClientEncryptionMethod	CiscoLwappDot11ClientCredentialType
CiscoLwappDot11ClientPowerSaveMode	CiscoLwappDot11ClientTxPowerMode	CiscoLwappDot11ClientRadioType

Defined Types

CldccManufacturerInfoEntry
SEQUENCE
	cldccManufacturerInfoStatus	CiscoLwappDot11ClientReqStatus
	cldccManufacturerInfoOUI	OCTET STRING
	cldccManufacturerInfoID	DisplayString
	cldccManufacturerInfoModel	DisplayString
	cldccManufacturerInfoSerialNum	DisplayString
	cldccManufacturerInfoRadioType	DisplayString
	cldccManufacturerInfoMacAddress	MacAddress
	cldccManufacturerInfoAntennaType	INTEGER
	cldccManufacturerInfoAntennaGain	Unsigned32

CldccManuRxSensEntry
SEQUENCE
	cldccManuRxSensRadioIndex	Unsigned32
	cldccManuRxSensRadioDataRateIndex	Unsigned32
	cldccManuRxSensRadioType	CiscoLwappDot11ClientRadioType
	cldccManuRxSensRadioDataRate	Unsigned32
	cldccManuRxSensMinRssi	Integer32
	cldccManuRxSensMaxRssi	Integer32

CldccCapabilityEntry
SEQUENCE
	cldccCapabilityStatus	CiscoLwappDot11ClientReqStatus
	cldccCapabilityRadioType	DisplayString
	cldccServiceCapability	DisplayString

CldccCapabilityChannelsEntry
SEQUENCE
	cldccCapabilityRadioIndex	Unsigned32
	cldccCapabilityChRadioType	CiscoLwappDot11ClientRadioType
	cldccCapabilityRadioChannels	DisplayString

CldccCapabilityTxPowerEntry
SEQUENCE
	cldccCapabilityTxPowerIndex	Unsigned32
	cldccCapabilityTxPowerRadioType	CiscoLwappDot11ClientRadioType
	cldccCapabilityTxPowerMode	INTEGER
	cldccCapabilityTxPower	OCTET STRING

CldccCapabilityDataRateEntry
SEQUENCE
	cldccCapabilityDataRateIndex	Unsigned32
	cldccCapabilityDataRateRadioType	CiscoLwappDot11ClientRadioType
	cldccCapabilityDataRates	DisplayString

CldccOperParamsEntry
SEQUENCE
	cldccOperParamsStatus	CiscoLwappDot11ClientReqStatus
	cldccOperParamsRadioType	DisplayString
	cldccOperParamsSSId	CiscoLwappDot11ClientSSId
	cldccOperParamsDeviceName	DisplayString
	cldccOperParamsDeviceType	INTEGER
	cldccOperParamsOSId	DisplayString
	cldccOperParamsOSVersion	DisplayString
	cldccOperParamsIpAddressMode	INTEGER
	cldccOperParamsIpv4Address	IpAddress
	cldccOperParamsIpv4SubnetMask	IpAddress
	cldccOperParamsIpv6Address	OCTET STRING
	cldccOperParamsIpv6SubnetMask	OCTET STRING
	cldccOperParamsDefaultGateway	IpAddress
	cldccOperParamsEntPhone	CvE164Address
	cldccOperParamsCellPhone	CvE164Address
	cldccOperParamsFirmwareVersion	DisplayString
	cldccOperParamsDriverVersion	DisplayString
	cldccOperParamsPowerSaveMode	CiscoLwappDot11ClientPowerSaveMode
	cldccOperParamsAuthMethod	CiscoLwappDot11ClientAuthMethod
	cldccOperParamsKeyMgmtMethod	CiscoLwappDot11ClientKeyMgmtMethod
	cldccOperParamsEncrMethod	CiscoLwappDot11ClientEncryptionMethod
	cldccOperParamsDot1xSecurity	DisplayString
	cldccOperParamsSysName	DisplayString
	cldccOperParamsLocalization	DisplayString

CldccOperParamsDNSEntry
SEQUENCE
	cldccOperParamsDNSServerIndex	Unsigned32
	cldccOperParamsDNSServerAddress	IpAddress

CldccOperParamsWINSEntry
SEQUENCE
	cldccOperParamsWINSServerIndex	Unsigned32
	cldccOperParamsWINSServerAddress	IpAddress

CldccOperChannelsEntry
SEQUENCE
	cldccOperRadioIndex	Unsigned32
	cldccOperRadioType	CiscoLwappDot11ClientRadioType
	cldccOperRadioChannels	DisplayString

CldccOperTxPowerEntry
SEQUENCE
	cldccOperTxPowerIndex	Unsigned32
	cldccOperTxPowerRadioType	CiscoLwappDot11ClientRadioType
	cldccOperTxPowerMode	INTEGER
	cldccOperTxPower	OCTET STRING

CldccOperDataRateEntry
SEQUENCE
	cldccOperDataRateIndex	Unsigned32
	cldccOperDataRateRadioType	CiscoLwappDot11ClientRadioType
	cldccOperDataRates	DisplayString

CldccProfileReqEntry
SEQUENCE
	cldccProfileReqNumProfiles	Integer32
	cldccProfileReqCurrentProfile	DisplayString
	cldccProfileReqReportingStatus	CiscoLwappDot11ClientReqStatus

CldccProfileEntry
SEQUENCE
	cldccProfileIndex	Unsigned32
	cldccProfileName	DisplayString
	cldccProfileSSId	CiscoLwappDot11ClientSSId
	cldccProfileAuthMethod	CiscoLwappDot11ClientAuthMethod
	cldccProfileKeyMgmtMethod	CiscoLwappDot11ClientKeyMgmtMethod
	cldccProfileEncrMethod	CiscoLwappDot11ClientEncryptionMethod
	cldccProfileDot1xSecurity	DisplayString
	cldccProfilePowerSaveMode	CiscoLwappDot11ClientPowerSaveMode
	cldccProfileRadioType	DisplayString
	cldccProfileProprietaryOptionName	DisplayString
	cldccProfileProprietaryOptionValue	DisplayString

CldccProfileAPEntry
SEQUENCE
	cldccProfilePreferredAPIndex	Unsigned32
	cldccProfilePreferredAP	MacAddress

CldccProfileTxPowerEntry
SEQUENCE
	cldccProfileTxPowerIndex	Unsigned32
	cldccProfileTxPowerRadioType	CiscoLwappDot11ClientRadioType
	cldccProfileTxPowerMode	INTEGER
	cldccProfileTxPower	OCTET STRING

CldccProfileChannelEntry
SEQUENCE
	cldccProfileChannelIndex	Unsigned32
	cldccProfileChRadioType	CiscoLwappDot11ClientRadioType
	cldccProfileChannels	DisplayString

CldccProfileDataRateEntry
SEQUENCE
	cldccProfileDataRateIndex	Unsigned32
	cldccProfileDataRateRadioType	CiscoLwappDot11ClientRadioType
	cldccProfileDataRates	DisplayString

CldccProfileRadioOptionsEntry
SEQUENCE
	cldccProfileRadioOptionIndex	INTEGER
	cldccProfileRadioOptionsRadioType	CiscoLwappDot11ClientRadioType
	cldccProfilePreambleType	INTEGER
	cldccProfileCCAMethod	INTEGER
	cldccProfileDataRetries	Integer32
	cldccProfileFragmentThreshold	Integer32

Defined Values

ciscoLwappDot11ClientCCXv5ReportingMIB		1.3.6.1.4.1.9.9.599.3.4
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about the CCXv5 clients that the controller is aware of. This configuration and status information pertaining to the client is termed as Client Reporting. Client Reporting is a mechanism used by a client and AP for the purpose of exchanging client information. Once a client has associated with the network, the associated AP may send the client a Client Report Request frame at any time. This frame identifies what type of information is desired from the client. For all CCXv5 clients, client reporting is organized into 4 major categories: Client Profile Information Client Manufacturer Information Client Operational Parameter Information Client Capability Information Client Profile is for retrieving information about the configuration on the client. Manufacturer Information is for retreiving data about the wireless adaptor in use. Operating parameters is for retrieving the details of the clients current operational modes Client Capabilities is for retrieving information about the client's capabilities. This mib defines the attributes for all of the above 4 categories. GLOSSARY Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node, Mobile Station(Ms) and client are used interchangeably. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol. [3] Cisco Compatible Extensions for WLAN Devices Version 5.0.11
MODULE-IDENTITY

ciscoLwappDot11ClientCCXv5ReportingMIBObjects		1.3.6.1.4.1.9.9.599.3.4.1
OBJECT IDENTIFIER

ciscoLwappDot11ClientCCXv5ReportingMIBConform		1.3.6.1.4.1.9.9.599.3.4.2
OBJECT IDENTIFIER

ciscoClientCcxManuReporting		1.3.6.1.4.1.9.9.599.3.4.1.1
OBJECT IDENTIFIER

ciscoClientCcxOperReporting		1.3.6.1.4.1.9.9.599.3.4.1.2
OBJECT IDENTIFIER

ciscoClientCcxProfileReporting		1.3.6.1.4.1.9.9.599.3.4.1.3
OBJECT IDENTIFIER

ciscoClientCcxCapabilityReporting		1.3.6.1.4.1.9.9.599.3.4.1.4
OBJECT IDENTIFIER

cldccManufacturerInfoTable		1.3.6.1.4.1.9.9.599.3.4.1.1.1
This table contains information about the Manufacturer Information for each client. An entry is added to this table automatically when a CCX version 5 or higher client associates to an AP managed by the controller. Similarly, the entry is removed from the controller when the client disassociates from the AP. While a client is associated, if a management station wishes to retrieve the manufacturer information from the client again, it can do so by setting the cldccManufacturerInfoStatus to initiate (1).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccManufacturerInfoEntry

cldccManufacturerInfoEntry		1.3.6.1.4.1.9.9.599.3.4.1.1.1.1
There is an entry in the table for each client identified by the client mac address.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccManufacturerInfoEntry

cldccManufacturerInfoStatus		1.3.6.1.4.1.9.9.599.3.4.1.1.1.1.1
This field indicates the status of current request. To trigger a request to the client to get the manufacturer information, this attribute is set to initiate(1). Once the request is triggered, the agent will set the value to inProgress(2). Based on the progress of the request, this is later updated to sucess(3), failure(4) or requestNotProcessedByClient(5). If a request has not been triggered explicitly by setting this attribute to initiate, then this field returns the status of the last request.
Status: current	Access: read-write
OBJECT-TYPE
	CiscoLwappDot11ClientReqStatus

cldccManufacturerInfoOUI		1.3.6.1.4.1.9.9.599.3.4.1.1.1.1.2
This field contains the IEEE assigned organizational unique identifier, i.e. the first 3 bytes of the MAC address of the wireless network connected device.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(3)

cldccManufacturerInfoID		1.3.6.1.4.1.9.9.599.3.4.1.1.1.1.3
This field contains the manufacturer identifier of the wireless network adaptor.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

cldccManufacturerInfoModel		1.3.6.1.4.1.9.9.599.3.4.1.1.1.1.4
This field contains a string identifying the model of the wireless network adaptor
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

cldccManufacturerInfoSerialNum		1.3.6.1.4.1.9.9.599.3.4.1.1.1.1.5
This field contains a string identifying the serial number of the wireless network adaptor.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

cldccManufacturerInfoRadioType		1.3.6.1.4.1.9.9.599.3.4.1.1.1.1.6
This is the radio type of the client.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccManufacturerInfoMacAddress		1.3.6.1.4.1.9.9.599.3.4.1.1.1.1.7
This field contains the mac address assigned to the client.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

cldccManufacturerInfoAntennaType		1.3.6.1.4.1.9.9.599.3.4.1.1.1.1.8
This field specifies the type of antenna connected to the wireless network adaptor. The different possible values are: omniDirectionalCollinear - this is a collinear omni-directional antenna. An omni directional antenna is an antenna system which radiates power uniformly in all directions. omniDirectionalDiversity - this is a diversity omni-directional antenna. omniDirectionalOther - this is an omni-directional antenna which is not collinear or diversity. directionalYagi - this indicates Yagi directional antenna. directionalPanel - this specifies a directional Panel type antenna. directionalSector - this indicates a directional Sector type antenna. directionalOther - this indicates a directional antenna which is not Yagi, Panel or Sector type. unknown - this indicates that the antenna type is unknown.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	omniDirectionalCollinear(0), omniDirectionalDiversity(1), omniDirectionalOther(2), directionalYagi(3), directionalPanel(4), directionalSector(5), directionalOther(6), unknown(7)

cldccManufacturerInfoAntennaGain		1.3.6.1.4.1.9.9.599.3.4.1.1.1.1.9
This field contains the peak gain in dbi of the antenna for directional antennas and the average gain in dBi for omni-directional antennas connected to the wireless network adaptor. The gain is in multiples of 0.5 dBm. An integer value 4 means 4 x 0.5 = 2 dBm of gain.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..40

cldccManuRxSensTable		1.3.6.1.4.1.9.9.599.3.4.1.1.2
This table contains information about the recevier sensitivity per radio for each client.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccManuRxSensEntry

cldccManuRxSensEntry		1.3.6.1.4.1.9.9.599.3.4.1.1.2.1
There is an entry in the table for each DNS Server configured on the client.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccManuRxSensEntry

cldccManuRxSensRadioIndex		1.3.6.1.4.1.9.9.599.3.4.1.1.2.1.1
This field contains a sequence number for the radios configured on a client.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccManuRxSensRadioDataRateIndex		1.3.6.1.4.1.9.9.599.3.4.1.1.2.1.2
This field contains a sequence number for the data rates radios configured on a client.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccManuRxSensRadioType		1.3.6.1.4.1.9.9.599.3.4.1.1.2.1.3
This field indicates the radio type for the radio
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientRadioType

cldccManuRxSensRadioDataRate		1.3.6.1.4.1.9.9.599.3.4.1.1.2.1.4
This field contains the data rate for a particular radio configured on a client.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cldccManuRxSensMinRssi		1.3.6.1.4.1.9.9.599.3.4.1.1.2.1.5
This field contains the min rssi for a data rate for a particular radio configured on a client.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

cldccManuRxSensMaxRssi		1.3.6.1.4.1.9.9.599.3.4.1.1.2.1.6
This field contains the max rssi for a data rate for a particular radio configured on a client.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

cldccCapabilityTable		1.3.6.1.4.1.9.9.599.3.4.1.4.1
This table contains information about the capabilities for each client. An entry is added to this table automatically when a CCX version 5 or higher client associates to an AP managed by the controller. Similarly, the entry is removed from the controller when the client disassociates from the AP. While a client is associated, if a management station wishes to retrieve the capability information from the client again, it can do so by setting the cldccCapabilityStatus to initiate (1).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccCapabilityEntry

cldccCapabilityEntry		1.3.6.1.4.1.9.9.599.3.4.1.4.1.1
There is an entry in the table for each entry identified by the client mac address.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccCapabilityEntry

cldccCapabilityStatus		1.3.6.1.4.1.9.9.599.3.4.1.4.1.1.1
This field indicates the status of current request. To trigger a request to the client to get the capability information, this attribute is set to initiate(1). Once the request is triggered, the agent will set the value to inProgress(2). Based on the progress of the request, this is later updated to sucess(3), failure(4) or requestNotProcessedByClient(5). If a request has not been triggered explicitly by setting this attribute to initiate, then this field returns the status of the last request.
Status: current	Access: read-write
OBJECT-TYPE
	CiscoLwappDot11ClientReqStatus

cldccCapabilityRadioType		1.3.6.1.4.1.9.9.599.3.4.1.4.1.1.2
This is the radio type of the client. This reports all of the radio types of which the wireless network adaptor is capable
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccServiceCapability		1.3.6.1.4.1.9.9.599.3.4.1.4.1.1.4
This field is a bit field that indicates the type of services available when using the wireless network adaptor. A bit value of 1 indicates that the service is supported and a bit value of 0 means either the service is not supported or it is unknown if the service is supported. The different types of services are: voice, uni-directional video, bi-directional video and GPS location services.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccCapabilityChannelsTable		1.3.6.1.4.1.9.9.599.3.4.1.4.2
This table contains information about the recevier sensitivity per radio for each client.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccCapabilityChannelsEntry

cldccCapabilityChannelsEntry		1.3.6.1.4.1.9.9.599.3.4.1.4.2.1
There is an entry in the table for each radio configured on the client.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccCapabilityChannelsEntry

cldccCapabilityRadioIndex		1.3.6.1.4.1.9.9.599.3.4.1.4.2.1.1
This field contains a sequence number for the radios configured on a client.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccCapabilityChRadioType		1.3.6.1.4.1.9.9.599.3.4.1.4.2.1.2
This field indicates the radio type for the radio
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientRadioType

cldccCapabilityRadioChannels		1.3.6.1.4.1.9.9.599.3.4.1.4.2.1.3
This field contains a list of 1 or more comma separated radio channel numbers that this client is capable of communicating on.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccCapabilityTxPowerTable		1.3.6.1.4.1.9.9.599.3.4.1.4.3
This table contains information about the Tx power mode values for each client for which the transmit power mode (as indicated by cldccCapabilityTxPowerMode) is fixed. An entry is added to this table automatically when a CCX version 5 or higher client associates to an AP managed by the controller and its power mode is fixed. Similarly, the entry is removed from the controller when the client disassociates from the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccCapabilityTxPowerEntry

cldccCapabilityTxPowerEntry		1.3.6.1.4.1.9.9.599.3.4.1.4.3.1
There is an entry in the table for each of the client Tx Power values if the client's power mode is fixed. Each entry is identified by the client mac address and an index for the power value.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccCapabilityTxPowerEntry

cldccCapabilityTxPowerIndex		1.3.6.1.4.1.9.9.599.3.4.1.4.3.1.1
This is an index for the different Tx power values that a client is capable of supporting.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccCapabilityTxPowerRadioType		1.3.6.1.4.1.9.9.599.3.4.1.4.3.1.2
This field indicates the radio type of the client.
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientRadioType

cldccCapabilityTxPowerMode		1.3.6.1.4.1.9.9.599.3.4.1.4.3.1.3
This field identifies the transmit power mode of the client STA. The Tx Power mode can be either fixed or automatic. Tx Power Mode values for the client can be retrieved from the cldccCapabilityTxPowerTable if the power mode is fixed. If the power mode is automatic, then there are no entries in the cldccCapabilityTxPowerTable for this client.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	fixed(0), automatic(1)

cldccCapabilityTxPower		1.3.6.1.4.1.9.9.599.3.4.1.4.3.1.4
This field contains the Tx power levels supported by a client.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

cldccCapabilityDataRateTable		1.3.6.1.4.1.9.9.599.3.4.1.4.4
This table contains information about the Tx power mode values for each client for which the transmit power mode (as indicated by cldccCapabilityTxPowerMode) is fixed. An entry is added to this table automatically when a CCX version 5 or higher client associates to an AP managed by the controller and its power mode is fixed. Similarly, the entry is removed from the controller when the client disassociates from the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccCapabilityDataRateEntry

cldccCapabilityDataRateEntry		1.3.6.1.4.1.9.9.599.3.4.1.4.4.1
There is an entry in the table for each of the client Tx Power values if the client's power mode is fixed. Each entry is identified by the client mac address and an index for the power value.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccCapabilityDataRateEntry

cldccCapabilityDataRateIndex		1.3.6.1.4.1.9.9.599.3.4.1.4.4.1.1
This is an index for the different data rate values that a client is capable of supporting.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccCapabilityDataRateRadioType		1.3.6.1.4.1.9.9.599.3.4.1.4.4.1.2
This field indicates the radio type for the radio
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientRadioType

cldccCapabilityDataRates		1.3.6.1.4.1.9.9.599.3.4.1.4.4.1.3
This field contains the data rates for a particular radio.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

cldccOperParamsTable		1.3.6.1.4.1.9.9.599.3.4.1.2.1
This table contains information about the operational parameters for each client. An entry is added to this table automatically when a CCX version 5 or higher client associates to an AP managed by the controller. Similarly, the entry is removed from the controller when the client disassociates from the AP. At any point in time, while a client is associated, if a management station wishes to retrieve the current operational information from the client, it should do so by setting the cldccOperParamsStatus to initiate (1).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccOperParamsEntry

cldccOperParamsEntry		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1
There is an entry in the table for each client identified by the client mac address.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccOperParamsEntry

cldccOperParamsStatus		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.1
This field indicates the status of current request. To trigger a request to the client to get the operational information, this attribute is set to initiate(1). Once the request is triggered, the agent will set the value to inProgress(2). Based on the progress of the request, this is later updated to sucess(3), failure(4) or requestNotProcessedByClient(5). If a request has not been triggered explicitly by setting this attribute to initiate, then this field returns the status of the last request.
Status: current	Access: read-write
OBJECT-TYPE
	CiscoLwappDot11ClientReqStatus

cldccOperParamsRadioType		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.2
This field indicates the radio type of the client.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccOperParamsSSId		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.7
This field specifies the SSId being used by the client.
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientSSId

cldccOperParamsDeviceName		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.8
This field contains the device name assigned to the wireless network adaptor by the operating system, e.g., WLAN Connection 1.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccOperParamsDeviceType		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.9
This field indicates what type of device is the client. The different types of devices are: laptop - the client machine is a laptop pc - the client machine is a PC pda - this indicates a Personal Digital Assistant dot11MobilePhone - this indicates an 802.11 mobile phone dualModePhone - this indicates a dual mode phone wgb - this indicates a work group bridge scanner - this indicates a scanner tabletPc - this indicates a tablet type of PC printer - this indicates a printer projector - this indicates a projector videoConfSystem - this indicates a Videe Conferencing System camera - this indicates a camera gamingSystem - this indicates a gaming system dot11DeskPhone - this indicates an 802.11 desk phone cashRegister - this indicates a cash register radioTag - this indicates a radio tag rfidSensor - this indicates a radio sensor server - this indicates a server type of device appSpecific - this indicates that the device is application specific unknown - this indicates that the client type is unknown.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	laptop(0), pc(1), pda(2), dot11MobilePhone(3), dualModePhone(4), wgb(5), scanner(6), tabletPc(7), printer(8), projector(9), videoConfSystem(10), camera(11), gamingSystem(12), dot11DeskPhone(13), cashRegister(14), radioTag(15), rfidSensor(16), server(17), appSpecific(18), unknown(255)

cldccOperParamsOSId		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.10
This field identifies the operating system using the wireless network adaptor.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccOperParamsOSVersion		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.11
This field identifies the version of operating system using the wireless network adaptor.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccOperParamsIpAddressMode		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.12
This field indicates how the ip address was assigned to the client - ie. was the address assigned statically or via dhcp.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	static(0), dhcp(1)

cldccOperParamsIpv4Address		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.13
This field identifies the ipv4 address assigned to the client.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

cldccOperParamsIpv4SubnetMask		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.14
This field identifies the ipv4 subnet mask assigned to the client.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

cldccOperParamsIpv6Address		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.15
This field contains the ip v6 address assigned to the client.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..16)

cldccOperParamsIpv6SubnetMask		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.16
This field contains the mask for the ip address assigned to the client.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..16)

cldccOperParamsDefaultGateway		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.17
This field specifies the default gateway chosen for the client.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

cldccOperParamsEntPhone		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.18
This field specifies the enterprise phone number for the client.
Status: current	Access: read-only
OBJECT-TYPE
	CvE164Address

cldccOperParamsCellPhone		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.19
This field specifies the cell phone number for the client.
Status: current	Access: read-only
OBJECT-TYPE
	CvE164Address

cldccOperParamsFirmwareVersion		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.20
This field contains the string identifying the version of firmware currently installed on the client.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccOperParamsDriverVersion		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.21
This field contains the string identifying the driver version of firmware currently installed on the client.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccOperParamsPowerSaveMode		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.22
This is the type of power save mode configured on the client.
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientPowerSaveMode

cldccOperParamsAuthMethod		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.23
This field indicates the authentication method currently used by the client.
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientAuthMethod

cldccOperParamsKeyMgmtMethod		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.25
This field indicates the key management method currently used by the client.
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientKeyMgmtMethod

cldccOperParamsEncrMethod		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.26
This field indicates the encryption method currently used by the client.
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientEncryptionMethod

cldccOperParamsDot1xSecurity		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.27
This field indicates the 802.1x security parameters currently configured for the client.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccOperParamsSysName		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.28
This field contains the name of the client device. This field contains the system name assigned by the operating system to the host device incorporating the wireless network adaptor, e.g., linux-box or XP-laptop-37
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccOperParamsLocalization		1.3.6.1.4.1.9.9.599.3.4.1.2.1.1.29
This field contains the localization information of the client device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccOperParamsDNSTable		1.3.6.1.4.1.9.9.599.3.4.1.2.2
This table contains information about the DNS Servers currently configured for each client. Entries are added to this table automatically once the associated client's operational parameters are retrieved using the cldccOperParamsTable. Entries are removed automatically when the client is disassociated.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccOperParamsDNSEntry

cldccOperParamsDNSEntry		1.3.6.1.4.1.9.9.599.3.4.1.2.2.1
There is an entry in the table for each DNS Server configured on the client.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccOperParamsDNSEntry

cldccOperParamsDNSServerIndex		1.3.6.1.4.1.9.9.599.3.4.1.2.2.1.1
This field contains a sequence number for the DNS servers configured on a client.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccOperParamsDNSServerAddress		1.3.6.1.4.1.9.9.599.3.4.1.2.2.1.2
This field contains the ip address of a DNS server
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

cldccOperParamsWINSTable		1.3.6.1.4.1.9.9.599.3.4.1.2.3
This table contains information about the WINS Servers currently configured for each client. Entries are added to this table automatically once the associated client's operational parameters are retrieved using the cldccOperParamsTable. Entries are removed automatically when the client is disassociated.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccOperParamsWINSEntry

cldccOperParamsWINSEntry		1.3.6.1.4.1.9.9.599.3.4.1.2.3.1
There is an entry in the table for each WINS Server configured on the client.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccOperParamsWINSEntry

cldccOperParamsWINSServerIndex		1.3.6.1.4.1.9.9.599.3.4.1.2.3.1.1
This field contains a sequence number for the WINS servers configured on a client.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccOperParamsWINSServerAddress		1.3.6.1.4.1.9.9.599.3.4.1.2.3.1.2
This field contains the ip address of a WINS server configured for the client.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

cldccOperChannelsTable		1.3.6.1.4.1.9.9.599.3.4.1.2.4
This table contains information about the recevier sensitivity per radio for each client.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccOperChannelsEntry

cldccOperChannelsEntry		1.3.6.1.4.1.9.9.599.3.4.1.2.4.1
There is an entry in the table for each radio configured on the client.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccOperChannelsEntry

cldccOperRadioIndex		1.3.6.1.4.1.9.9.599.3.4.1.2.4.1.1
This field contains a sequence number for the radios configured on a client.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccOperRadioType		1.3.6.1.4.1.9.9.599.3.4.1.2.4.1.2
This field indicates the radio type for the radio
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientRadioType

cldccOperRadioChannels		1.3.6.1.4.1.9.9.599.3.4.1.2.4.1.3
This field contains a list of 1 or more comma separated radio channel numbers that this client is communicating on.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

cldccOperTxPowerTable		1.3.6.1.4.1.9.9.599.3.4.1.2.5
This table contains information about the Tx power mode values for each client for which the transmit power mode (as indicated by cldccCapabilityTxPowerMode) is fixed. An entry is added to this table automatically when a CCX version 5 or higher client associates to an AP managed by the controller and its power mode is fixed. Similarly, the entry is removed from the controller when the client disassociates from the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccOperTxPowerEntry

cldccOperTxPowerEntry		1.3.6.1.4.1.9.9.599.3.4.1.2.5.1
There is an entry in the table for each of the client Tx Power values if the client's power mode is fixed. Each entry is identified by the client mac address and an index for the power value.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccOperTxPowerEntry

cldccOperTxPowerIndex		1.3.6.1.4.1.9.9.599.3.4.1.2.5.1.1
This is an index for the different Tx power values that a client is capable of supporting.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccOperTxPowerRadioType		1.3.6.1.4.1.9.9.599.3.4.1.2.5.1.2
This field indicates the radio type for the radio
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientRadioType

cldccOperTxPowerMode		1.3.6.1.4.1.9.9.599.3.4.1.2.5.1.3
This field identifies the transmit power mode of the client STA. The Tx Power mode can be either fixed or automatic. Tx Power Mode values for the client can be retrieved from the cldccCapabilityTxPowerTable if the power mode is fixed. If the power mode is automatic, then there are no entries in the cldccCapabilityTxPowerTable for this client.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	fixed(0), automatic(1)

cldccOperTxPower		1.3.6.1.4.1.9.9.599.3.4.1.2.5.1.4
This field contains the Tx power levels supported by a client.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

cldccOperDataRateTable		1.3.6.1.4.1.9.9.599.3.4.1.2.6
This table contains information about the Tx power mode values for each client for which the transmit power mode (as indicated by cldccCapabilityTxPowerMode) is fixed. An entry is added to this table automatically when a CCX version 5 or higher client associates to an AP managed by the controller and its power mode is fixed. Similarly, the entry is removed from the controller when the client disassociates from the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccOperDataRateEntry

cldccOperDataRateEntry		1.3.6.1.4.1.9.9.599.3.4.1.2.6.1
There is an entry in the table for each of the client Tx Power values if the client's power mode is fixed. Each entry is identified by the client mac address and an index for the power value.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccOperDataRateEntry

cldccOperDataRateIndex		1.3.6.1.4.1.9.9.599.3.4.1.2.6.1.1
This is an index for the different data rate values that a client is capable of supporting.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccOperDataRateRadioType		1.3.6.1.4.1.9.9.599.3.4.1.2.6.1.2
This field indicates the radio type for the radio
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientRadioType

cldccOperDataRates		1.3.6.1.4.1.9.9.599.3.4.1.2.6.1.3
This field contains the data rates for a particular radio.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

cldccProfileReqTable		1.3.6.1.4.1.9.9.599.3.4.1.3.1
For each CCX Version 5 or higher, this table contains information about the number of profiles configured on the client and the current profile. An entry is added to this table automatically when a CCX version 5 or higher client associates to an AP managed by the controller. Similarly, the entry is removed from the controller when the client disassociates from the AP. At any point in time, while a client is associated, if a management station wishes to retrieve the current profile information from the client, it should do so by setting the cldccProfileReqReportingStatus to initiate (1).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccProfileReqEntry

cldccProfileReqEntry		1.3.6.1.4.1.9.9.599.3.4.1.3.1.1
There is an entry in the table for each client identified by client mac address.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccProfileReqEntry

cldccProfileReqNumProfiles		1.3.6.1.4.1.9.9.599.3.4.1.3.1.1.1
This is the number of profiles that have been configured on the client.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..32

cldccProfileReqCurrentProfile		1.3.6.1.4.1.9.9.599.3.4.1.3.1.1.2
This is the name of the profile which is currently active on the client. Details of this profile can be fetched from the clProfileTable.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..100)

cldccProfileReqReportingStatus		1.3.6.1.4.1.9.9.599.3.4.1.3.1.1.3
This field indicates the status of profile request. To trigger a request to the client to get the profile information, this attribute is set to initiate(1). Once the request is triggered, the agent will set the value to inProgress(2). Based on the progress of the request, this is later updated to sucess(3), failure(4) or requestNotProcessedByClient(5). If a request has not been triggered explicitly by setting this attribute to initiate, then this field returns the status of the last request. For individual profile details look at the clProfile table.
Status: current	Access: read-write
OBJECT-TYPE
	CiscoLwappDot11ClientReqStatus

cldccProfileTable		1.3.6.1.4.1.9.9.599.3.4.1.3.2
This table contains information about the profiles configured on the client. Entries are added to this table automatically once the associated client's profile parameters are retrieved using the cldccProfileReqTable. Entries are removed automatically when the client is disassociated.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccProfileEntry

cldccProfileEntry		1.3.6.1.4.1.9.9.599.3.4.1.3.2.1
There is an entry in the table for each profile identified by the profile number configured on each client.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccProfileEntry

cldccProfileIndex		1.3.6.1.4.1.9.9.599.3.4.1.3.2.1.1
This field contains a profile number for the profile configured on a client. This is the index of the profile.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccProfileName		1.3.6.1.4.1.9.9.599.3.4.1.3.2.1.2
This is the name of the profile.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..100)

cldccProfileSSId		1.3.6.1.4.1.9.9.599.3.4.1.3.2.1.4
This is the Service Set Identifier for this profile.
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientSSId

cldccProfileAuthMethod		1.3.6.1.4.1.9.9.599.3.4.1.3.2.1.5
This is the authentication method used by this profile.
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientAuthMethod

cldccProfileKeyMgmtMethod		1.3.6.1.4.1.9.9.599.3.4.1.3.2.1.6
This is the key management method used by this profile.
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientKeyMgmtMethod

cldccProfileEncrMethod		1.3.6.1.4.1.9.9.599.3.4.1.3.2.1.7
This is the encryption method used by this profile.
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientEncryptionMethod

cldccProfileDot1xSecurity		1.3.6.1.4.1.9.9.599.3.4.1.3.2.1.8
This indicates how the credentials are configured for this profile.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccProfilePowerSaveMode		1.3.6.1.4.1.9.9.599.3.4.1.3.2.1.9
This is the type of power save mode configured on the wireless network adaptor for this profile.
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientPowerSaveMode

cldccProfileRadioType		1.3.6.1.4.1.9.9.599.3.4.1.3.2.1.10
This is the radio type configured for this profile.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccProfileProprietaryOptionName		1.3.6.1.4.1.9.9.599.3.4.1.3.2.1.11
This field contains an optional proprietary option used by the client.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccProfileProprietaryOptionValue		1.3.6.1.4.1.9.9.599.3.4.1.3.2.1.12
This field contains the value of the optional proprietary option used by the client.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..100)

cldccProfileAPTable		1.3.6.1.4.1.9.9.599.3.4.1.3.3
This table contains information about the preferred APs for a profile configured on the client. Entries are added to this table automatically once the associated client's profile parameters are retrieved using the cldccProfileReqTable. Entries are removed automatically when the client is disassociated.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccProfileAPEntry

cldccProfileAPEntry		1.3.6.1.4.1.9.9.599.3.4.1.3.3.1
For each of a client's profiles, there could be multiple preferred APs configured. So, each preferred AP is identified by client mac, profile number and AP number.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccProfileAPEntry

cldccProfilePreferredAPIndex		1.3.6.1.4.1.9.9.599.3.4.1.3.3.1.1
This is a sequence number for the preferred AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccProfilePreferredAP		1.3.6.1.4.1.9.9.599.3.4.1.3.3.1.2
This is the BSSID of any preferred access point to be used by the wireless network adaptor.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

cldccProfileTxPowerTable		1.3.6.1.4.1.9.9.599.3.4.1.3.4
This table contains information about the Tx power values for each client for each of the profiles. Entries are added to this table automatically once the associated client's profile parameters are retrieved using the cldccProfileReqTable. Entries are removed automatically when the client is disassociated.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccProfileTxPowerEntry

cldccProfileTxPowerEntry		1.3.6.1.4.1.9.9.599.3.4.1.3.4.1
For each of a client's profiles, there could be multiple Tx power values configured. So, each power value is identified by client mac, profile number and power index.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccProfileTxPowerEntry

cldccProfileTxPowerIndex		1.3.6.1.4.1.9.9.599.3.4.1.3.4.1.1
This is an index for the different Tx power values that a profile on the client is capable of supporting.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccProfileTxPowerRadioType		1.3.6.1.4.1.9.9.599.3.4.1.3.4.1.2
This field indicates the radio type for the radio
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientRadioType

cldccProfileTxPowerMode		1.3.6.1.4.1.9.9.599.3.4.1.3.4.1.3
This field identifies the transmit power mode of the client STA. The Tx Power mode can be either fixed or automatic. Tx Power Mode values for the client can be retrieved from the cldccCapabilityTxPowerTable if the power mode is fixed. If the power mode is automatic, then there are no entries in the cldccCapabilityTxPowerTable for this client.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	fixed(0), automatic(1)

cldccProfileTxPower		1.3.6.1.4.1.9.9.599.3.4.1.3.4.1.4
This field contains the Tx power levels supported by a client.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

cldccProfileChannelTable		1.3.6.1.4.1.9.9.599.3.4.1.3.5
This table contains information about the radio channels for a profile configured on the client.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccProfileChannelEntry

cldccProfileChannelEntry		1.3.6.1.4.1.9.9.599.3.4.1.3.5.1
There is an entry in the table for each profile identified by the profile number.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccProfileChannelEntry

cldccProfileChannelIndex		1.3.6.1.4.1.9.9.599.3.4.1.3.5.1.1
This is a sequence number for the radio types.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccProfileChRadioType		1.3.6.1.4.1.9.9.599.3.4.1.3.5.1.2
These are the radio type for the profile.
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientRadioType

cldccProfileChannels		1.3.6.1.4.1.9.9.599.3.4.1.3.5.1.3
This field contains a list of 1 or more comma separated radio channel numbers that this profile is configured to communicate on.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

cldccProfileDataRateTable		1.3.6.1.4.1.9.9.599.3.4.1.3.6
This table contains information about the Tx power mode values for each client for which the transmit power mode (as indicated by cldccProfileTxPowerMode) is fixed. An entry is added to this table automatically when a CCX version 5 or higher client associates to an AP managed by the controller and its power mode is fixed. Similarly, the entry is removed from the controller when the client disassociates from the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccProfileDataRateEntry

cldccProfileDataRateEntry		1.3.6.1.4.1.9.9.599.3.4.1.3.6.1
There is an entry in the table for each of the client Tx Power values if the client's power mode is fixed. Each entry is identified by the client mac address and an index for the power value.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccProfileDataRateEntry

cldccProfileDataRateIndex		1.3.6.1.4.1.9.9.599.3.4.1.3.6.1.1
This is an index for the different data rate values that a client is capable of supporting.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

cldccProfileDataRateRadioType		1.3.6.1.4.1.9.9.599.3.4.1.3.6.1.2
This field indicates the radio type for the radio
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientRadioType

cldccProfileDataRates		1.3.6.1.4.1.9.9.599.3.4.1.3.6.1.3
This field contains the data rates for a particular radio.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

cldccProfileRadioOptionsTable		1.3.6.1.4.1.9.9.599.3.4.1.3.7
This table contains information about the radio options of the profiles configured on the client.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CldccProfileRadioOptionsEntry

cldccProfileRadioOptionsEntry		1.3.6.1.4.1.9.9.599.3.4.1.3.7.1
There is an entry in the table for each radio per profile identified by the profile number and radio channel.
Status: current	Access: not-accessible
OBJECT-TYPE
	CldccProfileRadioOptionsEntry

cldccProfileRadioOptionIndex		1.3.6.1.4.1.9.9.599.3.4.1.3.7.1.1
This is the radio type index configured for this radio for profile.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..10

cldccProfileRadioOptionsRadioType		1.3.6.1.4.1.9.9.599.3.4.1.3.7.1.2
This field indicates the radio type for the radio
Status: current	Access: read-only
OBJECT-TYPE
	CiscoLwappDot11ClientRadioType

cldccProfilePreambleType		1.3.6.1.4.1.9.9.599.3.4.1.3.7.1.3
This is the radio preamble type configured for this radio for profile.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	short(0), long(1), unknown(255)

cldccProfileCCAMethod		1.3.6.1.4.1.9.9.599.3.4.1.3.7.1.4
This field identifies the clear channel assessment method configured for this profile.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	energyDetect(0), carrierDetect(1), energyCarrierDetect(2), unknown(255)

cldccProfileDataRetries		1.3.6.1.4.1.9.9.599.3.4.1.3.7.1.5
This field identifies the max number of data retries for the wireless network adaptor.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..10

cldccProfileFragmentThreshold		1.3.6.1.4.1.9.9.599.3.4.1.3.7.1.6
This field identifies the fragment threshold for the wireless network adaptor.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	256..2346