CISCO-MEDIA-QUALITY-MIB

File: CISCO-MEDIA-QUALITY-MIB.mib (108240 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
DIAL-CONTROL-MIB SNMP-FRAMEWORK-MIB CISCO-DIAL-CONTROL-MIB
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Integer32 Unsigned32 MODULE-COMPLIANCE
OBJECT-GROUP TruthValue callActiveSetupTime
callActiveIndex SnmpAdminString cCallHistoryIndex
CvcGUid CvcCoderTypeRate CvcCallReferenceIdOrZero
ciscoMgmt

Defined Types

CmqVoIPCallActiveEntry  
SEQUENCE    
  cmqVoIPCallActiveConnectionId CvcGUid
  cmqVoIPCallActiveCallReferenceId CvcCallReferenceIdOrZero
  cmqVoIPCallActiveRxCodecId CvcCoderTypeRate
  cmqVoIPCallActiveRxSevConcealRatioPct Unsigned32
  cmqVoIPCallActiveRxCallConcealRatioPct Unsigned32
  cmqVoIPCallActiveRxPktLossRatioPct Unsigned32
  cmqVoIPCallActiveRxRoundTripTime Unsigned32
  cmqVoIPCallActiveRxCallDur Unsigned32
  cmqVoIPCallActiveRxVoiceDur Unsigned32
  cmqVoIPCallActiveRxPktLossConcealDur Unsigned32
  cmqVoIPCallActiveRxPktCntExpected Counter32
  cmqVoIPCallActiveRxPktCntNotArrived Counter32
  cmqVoIPCallActiveRxPktCntComfortNoise Counter32
  cmqVoIPCallActiveRxPktCntUnusableLate Counter32
  cmqVoIPCallActiveRxPktCntDiscarded Counter32
  cmqVoIPCallActiveRxPktCntEffLoss Counter32
  cmqVoIPCallActiveRxUnimpairedSecOK Counter32
  cmqVoIPCallActiveRxConcealSec Counter32
  cmqVoIPCallActiveRxSevConcealSec Counter32
  cmqVoIPCallActiveRxJBufMode INTEGER
  cmqVoIPCallActiveRxJBufNomDelay Unsigned32
  cmqVoIPCallActiveRxJBufDlyNow Unsigned32
  cmqVoIPCallActiveRxJBufLowWater Unsigned32
  cmqVoIPCallActiveRxJBuffHiWater Unsigned32
  cmqVoIPCallActive3550JShortTermAvg Unsigned32
  cmqVoIPCallActive3550JCallAvg Unsigned32
  cmqVoIPCallActiveRxSignalLvl Integer32
  cmqVoIPCallActiveRxPred107Rscore Unsigned32
  cmqVoIPCallActiveRxPred107RMosListen Unsigned32
  cmqVoIPCallActiveRxPred107RScoreConv Unsigned32
  cmqVoIPCallActiveRxPred107RMosConv Unsigned32
  cmqVoIPCallActiveRxPred107CodecIeBase Unsigned32
  cmqVoIPCallActiveRxPred107CodecBPL Unsigned32
  cmqVoIPCallActiveRxPred107DefaultR0 Unsigned32
  cmqVoIPCallActiveRxPred107IeEff Unsigned32
  cmqVoIPCallActiveRxPred107Idd Unsigned32
  cmqVoIPCallActiveRxPredMosLqoAvg Unsigned32
  cmqVoIPCallActiveRxPredMosLqoRecent Unsigned32
  cmqVoIPCallActiveRxPredMosLqoBaseline Unsigned32
  cmqVoIPCallActiveRxPredMosLqoMin Unsigned32
  cmqVoIPCallActiveRxPredMosLqoNumWin Unsigned32
  cmqVoIPCallActiveRxPredMosLqoBursts Unsigned32
  cmqVoIPCallActiveRxPredMosLqoFrLoss Unsigned32
  cmqVoIPCallActiveRxPredMosLqoVerID SnmpAdminString
  cmqVoIPCallActiveTxCodecId CvcCoderTypeRate
  cmqVoIPCallActiveTxVadEnabled TruthValue
  cmqVoIPCallActiveTxTmrCallDur Unsigned32
  cmqVoIPCallActiveTxTmrActSpeechDur Unsigned32
  cmqVoIPCallActiveTxSignalLvl Integer32
  cmqVoIPCallActiveTxNoiseFloor Integer32

CmqCommonCallActiveNREntry  
SEQUENCE    
  cmqCommonCallActiveNRConnectionId CvcGUid
  cmqCommonCallActiveNRCallReferenceId CvcCallReferenceIdOrZero
  cmqCommonCallActiveNRCallType INTEGER
  cmqCommonCallActiveNREnabledMic TruthValue
  cmqCommonCallActiveNREnabledEar TruthValue
  cmqCommonCallActiveNRDirMic INTEGER
  cmqCommonCallActiveNRDirEar INTEGER
  cmqCommonCallActiveNRLibVer Unsigned32
  cmqCommonCallActiveNRIntensity Integer32
  cmqCommonCallActivePreNRNoiseFloorEstMic Integer32
  cmqCommonCallActivePostNRNoiseFloorEstMic Integer32
  cmqCommonCallActivePreNRNoiseFloorEstEar Integer32
  cmqCommonCallActivePostNRNoiseFloorEstEar Integer32

CmqCommonCallActiveASPEntry  
SEQUENCE    
  cmqCommonCallActiveASPConnectionId CvcGUid
  cmqCommonCallActiveASPCallReferenceId CvcCallReferenceIdOrZero
  cmqCommonCallActiveASPCallType INTEGER
  cmqCommonCallActiveASPEnabledMic TruthValue
  cmqCommonCallActiveASPEnabledEar TruthValue
  cmqCommonCallActiveASPDirMic INTEGER
  cmqCommonCallActiveASPDirEar INTEGER
  cmqCommonCallActiveASPMode INTEGER
  cmqCommonCallActiveASPVer Unsigned32
  cmqCommonCallActiveNumSigASPTriggMic Unsigned32
  cmqCommonCallActiveDurSigASPTriggMic Unsigned32
  cmqCommonCallActiveTotNumASPTriggMic Unsigned32
  cmqCommonCallActiveTotASPDurMic Unsigned32
  cmqCommonCallActiveLoudestFreqEstForLongEpiMic Unsigned32
  cmqCommonCallActiveLongestDurEpiMic Unsigned32
  cmqCommonCallActiveNumSigASPTriggEar Unsigned32
  cmqCommonCallActiveDurSigASPTriggEar Unsigned32
  cmqCommonCallActiveTotNumASPTriggEar Unsigned32
  cmqCommonCallActiveTotASPDurEar Unsigned32
  cmqCommonCallActiveLoudestFreqEstForLongEpiEar Unsigned32
  cmqCommonCallActiveLongestDurEpiEar Unsigned32

CmqVoIPCallHistoryEntry  
SEQUENCE    
  cmqVoIPCallHistoryConnectionId CvcGUid
  cmqVoIPCallHistoryCallReferenceId CvcCallReferenceIdOrZero
  cmqVoIPCallHistoryRxCodecId CvcCoderTypeRate
  cmqVoIPCallHistoryRxSevConcealRatioPct Unsigned32
  cmqVoIPCallHistoryRxCallConcealRatioPct Unsigned32
  cmqVoIPCallHistoryRxPktLossRatioPct Unsigned32
  cmqVoIPCallHistoryRxRoundTripTime Unsigned32
  cmqVoIPCallHistoryRxCallDur Unsigned32
  cmqVoIPCallHistoryRxVoiceDur Unsigned32
  cmqVoIPCallHistoryRxPktLossConcealDur Unsigned32
  cmqVoIPCallHistoryRxPktCntExpected Counter32
  cmqVoIPCallHistoryRxPktCntNotArrived Counter32
  cmqVoIPCallHistoryRxPktCntComfortNoise Counter32
  cmqVoIPCallHistoryRxPktCntUnusableLate Counter32
  cmqVoIPCallHistoryRxPktCntDiscarded Counter32
  cmqVoIPCallHistoryRxPktCntEffLoss Counter32
  cmqVoIPCallHistoryRxUnimpairedSecOK Counter32
  cmqVoIPCallHistoryRxConcealSec Counter32
  cmqVoIPCallHistoryRxSevConcealSec Counter32
  cmqVoIPCallHistoryRxJBufMode INTEGER
  cmqVoIPCallHistoryRxJBufNomDelay Unsigned32
  cmqVoIPCallHistoryRxJBufDlyNow Unsigned32
  cmqVoIPCallHistoryRxJBufLowWater Unsigned32
  cmqVoIPCallHistoryRxJBuffHiWater Unsigned32
  cmqVoIPCallHistory3550JShortTermAvg Unsigned32
  cmqVoIPCallHistory3550JCallAvg Unsigned32
  cmqVoIPCallHistoryRxSignalLvl Integer32
  cmqVoIPCallHistoryRxPred107Rscore Unsigned32
  cmqVoIPCallHistoryRxPred107RMosListen Unsigned32
  cmqVoIPCallHistoryRxPred107RScoreConv Unsigned32
  cmqVoIPCallHistoryRxPred107RMosConv Unsigned32
  cmqVoIPCallHistoryRxPred107CodecIeBase Unsigned32
  cmqVoIPCallHistoryRxPred107CodecBPL Unsigned32
  cmqVoIPCallHistoryRxPred107DefaultR0 Unsigned32
  cmqVoIPCallHistoryRxPred107IeEff Unsigned32
  cmqVoIPCallHistoryRxPred107Idd Unsigned32
  cmqVoIPCallHistoryRxPredMosLqoAvg Unsigned32
  cmqVoIPCallHistoryRxPredMosLqoRecent Unsigned32
  cmqVoIPCallHistoryRxPredMosLqoBaseline Unsigned32
  cmqVoIPCallHistoryRxPredMosLqoMin Unsigned32
  cmqVoIPCallHistoryRxPredMosLqoNumWin Unsigned32
  cmqVoIPCallHistoryRxPredMosLqoBursts Unsigned32
  cmqVoIPCallHistoryRxPredMosLqoFrLoss Unsigned32
  cmqVoIPCallHistoryRxPredMosLqoVerID SnmpAdminString
  cmqVoIPCallHistoryTxCodecId CvcCoderTypeRate
  cmqVoIPCallHistoryTxVadEnabled TruthValue
  cmqVoIPCallHistoryTxTmrCallDur Unsigned32
  cmqVoIPCallHistoryTxTmrActSpeechDur Unsigned32
  cmqVoIPCallHistoryTxSignalLvl Integer32
  cmqVoIPCallHistoryTxNoiseFloor Integer32

CmqCommonCallHistoryNREntry  
SEQUENCE    
  cmqCommonCallHistoryNRConnectionId CvcGUid
  cmqCommonCallHistoryNRCallReferenceId CvcCallReferenceIdOrZero
  cmqCommonCallHistoryNRCallType INTEGER
  cmqCommonCallHistoryNREnabledMic TruthValue
  cmqCommonCallHistoryNREnabledEar TruthValue
  cmqCommonCallHistoryNRDirMic INTEGER
  cmqCommonCallHistoryNRDirEar INTEGER
  cmqCommonCallHistoryNRLibVer Unsigned32
  cmqCommonCallHistoryNRIntensity Integer32
  cmqCommonCallHistoryPreNRNoiseFloorEstMic Integer32
  cmqCommonCallHistoryPostNRNoiseFloorEstMic Integer32
  cmqCommonCallHistoryPreNRNoiseFloorEstEar Integer32
  cmqCommonCallHistoryPostNRNoiseFloorEstEar Integer32

CmqCommonCallHistoryASPEntry  
SEQUENCE    
  cmqCommonCallHistoryASPConnectionId CvcGUid
  cmqCommonCallHistoryASPCallReferenceId CvcCallReferenceIdOrZero
  cmqCommonCallHistoryASPCallType INTEGER
  cmqCommonCallHistoryASPEnabledMic TruthValue
  cmqCommonCallHistoryASPEnabledEar TruthValue
  cmqCommonCallHistoryASPDirMic INTEGER
  cmqCommonCallHistoryASPDirEar INTEGER
  cmqCommonCallHistoryASPMode INTEGER
  cmqCommonCallHistoryASPVer Integer32
  cmqCommonCallHistoryNumSigASPTriggMic Unsigned32
  cmqCommonCallHistoryDurSigASPTriggMic Unsigned32
  cmqCommonCallHistoryTotNumASPTriggMic Unsigned32
  cmqCommonCallHistoryTotASPDurMic Unsigned32
  cmqCommonCallHistoryLoudestFreqEstForLongEpiMic Unsigned32
  cmqCommonCallHistoryLongestDurEpiMic Unsigned32
  cmqCommonCallHistoryNumSigASPTriggEar Unsigned32
  cmqCommonCallHistoryDurSigASPTriggEar Unsigned32
  cmqCommonCallHistoryTotNumASPTriggEar Unsigned32
  cmqCommonCallHistoryTotASPDurEar Unsigned32
  cmqCommonCallHistoryLoudestFreqEstForLongEpiEar Unsigned32
  cmqCommonCallHistoryLongestDurEpiEar Unsigned32

CmqVideoCallActiveEntry  
SEQUENCE    
  cmqVideoCallActiveConnectionId CvcGUid
  cmqVideoCallActiveCallReferenceId CvcCallReferenceIdOrZero
  cmqVideoCallActiveRxMOSInstant Unsigned32
  cmqVideoCallActiveRxCompressDegradeInstant Unsigned32
  cmqVideoCallActiveRxNetworkDegradeInstant Unsigned32
  cmqVideoCallActiveRxTransscodeDegradeInstant Unsigned32
  cmqVideoCallActiveRxMOSAverage Unsigned32
  cmqVideoCallActiveRxCompressDegradeAverage Unsigned32
  cmqVideoCallActiveRxNetworkDegradeAverage Unsigned32
  cmqVideoCallActiveRxTransscodeDegradeAverage Unsigned32

CmqVideoCallHistoryEntry  
SEQUENCE    
  cmqVideoCallHistoryConnectionId CvcGUid
  cmqVideoCallHistoryCallReferenceId CvcCallReferenceIdOrZero
  cmqVideoCallHistoryRxMOSAverage Unsigned32
  cmqVideoCallHistoryRxCompressDegradeAverage Unsigned32
  cmqVideoCallHistoryRxNetworkDegradeAverage Unsigned32
  cmqVideoCallHistoryRxTransscodeDegradeAverage Unsigned32

Defined Values

ciscoMediaQualityMIB 1.3.6.1.4.1.9.9.769
This MIB module enhances the DIAL-CONTROL-MIB (RFC2128) by providing call information and voice and video quality statistics of call legs over a telephony and voice over IP network. *** ABBREVIATIONS, ACRONYMS AND SYMBOLS *** ASP - Acoustic Shock Protection MIC - Microphone MOS - Mean Opinion Score NR - Noise Reduction TDM - Time-Division Multiplexing VOIP - Voice Over IP
MODULE-IDENTITY    

ciscoMediaQualityMIBNotifs 1.3.6.1.4.1.9.9.769.0
OBJECT IDENTIFIER    

ciscoMediaQualityMIBObjects 1.3.6.1.4.1.9.9.769.1
OBJECT IDENTIFIER    

ciscoMediaQualityMIBConform 1.3.6.1.4.1.9.9.769.2
OBJECT IDENTIFIER    

ciscoMediaQualityMIBCompliances 1.3.6.1.4.1.9.9.769.2.1
OBJECT IDENTIFIER    

cmqVoiceCallActive 1.3.6.1.4.1.9.9.769.1.1
OBJECT IDENTIFIER    

cmqVoiceCallHistory 1.3.6.1.4.1.9.9.769.1.2
OBJECT IDENTIFIER    

cmqVideoCallActive 1.3.6.1.4.1.9.9.769.1.3
OBJECT IDENTIFIER    

cmqVideoCallHistory 1.3.6.1.4.1.9.9.769.1.4
OBJECT IDENTIFIER    

cmqVoIPCallActiveTable 1.3.6.1.4.1.9.9.769.1.1.1
This table is the VoIP extension to the callActiveTable of DIAL-CONTROL-MIB. It contains voice quality information and statistics for the VoIP call leg.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CmqVoIPCallActiveEntry

cmqVoIPCallActiveEntry 1.3.6.1.4.1.9.9.769.1.1.1.1
An entry (conceptual row) in the cmqVoIPCallActiveTable. An entry into this table is created when its associated call active entry in the DIAL-CONTROL-MIB is created which has corresponding callActiveInfoType equals to 'speech'. The entry is deleted when its associated call active entry in the DIAL-CONTROL-MIB is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  CmqVoIPCallActiveEntry  

cmqVoIPCallActiveConnectionId 1.3.6.1.4.1.9.9.769.1.1.1.1.1
The global connection identifier for the active VoIP leg of the call.
Status: current Access: read-only
OBJECT-TYPE    
  CvcGUid  

cmqVoIPCallActiveCallReferenceId 1.3.6.1.4.1.9.9.769.1.1.1.1.2
The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a reference ID greater than zero.
Status: current Access: read-only
OBJECT-TYPE    
  CvcCallReferenceIdOrZero  

cmqVoIPCallActiveRxCodecId 1.3.6.1.4.1.9.9.769.1.1.1.1.3
The codec type of the endpoint for the established voice path.
Status: current Access: read-only
OBJECT-TYPE    
  CvcCoderTypeRate  

cmqVoIPCallActiveRxSevConcealRatioPct 1.3.6.1.4.1.9.9.769.1.1.1.1.4
The ratio of severely concealed seconds to the sum of unimpaired seconds and concealed seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxCallConcealRatioPct 1.3.6.1.4.1.9.9.769.1.1.1.1.5
The ratio of the recent concealment time to recent talk-mode time interval. The talk-mode interval is 3 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPktLossRatioPct 1.3.6.1.4.1.9.9.769.1.1.1.1.6
The ratio of total effective received packet loss to the number of RTP packets expected.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxRoundTripTime 1.3.6.1.4.1.9.9.769.1.1.1.1.7
The round-trip delay is the sum of measured network delay plus transmit and receive endpoint processing delays.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxCallDur 1.3.6.1.4.1.9.9.769.1.1.1.1.8
Duration of receive path open from this peer to voice gateway for the call leg.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxVoiceDur 1.3.6.1.4.1.9.9.769.1.1.1.1.9
Duration of speech received from this peer to voice gateway for the call leg.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPktLossConcealDur 1.3.6.1.4.1.9.9.769.1.1.1.1.10
The sum of error predictive concealment and bad protocol concealment in milliseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPktCntExpected 1.3.6.1.4.1.9.9.769.1.1.1.1.11
The expected number of packets to be received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallActiveRxPktCntNotArrived 1.3.6.1.4.1.9.9.769.1.1.1.1.12
The expected number of packets minus the number of received packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallActiveRxPktCntComfortNoise 1.3.6.1.4.1.9.9.769.1.1.1.1.13
The number of received comfort noise packets for the call leg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallActiveRxPktCntUnusableLate 1.3.6.1.4.1.9.9.769.1.1.1.1.14
The number of received voice packets that arrived too late to playout with CODEC (Coder/Decoder) during the call.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallActiveRxPktCntDiscarded 1.3.6.1.4.1.9.9.769.1.1.1.1.15
The sum of the number of late packets and the number of bad protocol packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallActiveRxPktCntEffLoss 1.3.6.1.4.1.9.9.769.1.1.1.1.16
The total number of never-arrived packets and the number of discarded packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallActiveRxUnimpairedSecOK 1.3.6.1.4.1.9.9.769.1.1.1.1.17
The cumulative number of seconds during which there was no concealment and is considered as OK seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallActiveRxConcealSec 1.3.6.1.4.1.9.9.769.1.1.1.1.18
The cumulative number of seconds during which there was some concealment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallActiveRxSevConcealSec 1.3.6.1.4.1.9.9.769.1.1.1.1.19
The total number of seconds that are severely concealed from the start of the voice stream. A severly concealed second has more than 50ms of concealment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallActiveRxJBufMode 1.3.6.1.4.1.9.9.769.1.1.1.1.20
The jitter buffer mode configured for the endpoint. adaptive (1): an adaptive size algorithm for jitter buffer, fixed (2): a fixed size algorithm for jitter buffer, unknown (3): an unknown size algorithm for jitter buffer, disabled (4): no jitter buffer is configured.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER adaptive(1), fixed(2), unknown(3), disabled(4)  

cmqVoIPCallActiveRxJBufNomDelay 1.3.6.1.4.1.9.9.769.1.1.1.1.21
The nominal jitter buffer playout delay in milliseconds configured for the endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxJBufDlyNow 1.3.6.1.4.1.9.9.769.1.1.1.1.22
The playout delay buffer in milliseconds to accommodate interarrival jitter. The interarrival jitter is the network arrival jitter between consecutive frames measured at the receiver.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxJBufLowWater 1.3.6.1.4.1.9.9.769.1.1.1.1.23
The minimum jitter buffer playout delay in milliseconds configured for the endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxJBuffHiWater 1.3.6.1.4.1.9.9.769.1.1.1.1.24
The maximum jitter buffer playout delay in milliseconds configured for the endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActive3550JShortTermAvg 1.3.6.1.4.1.9.9.769.1.1.1.1.25
The instantaneous RFC3550 playout delay buffer in milliseconds to accommodate packet jitter.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActive3550JCallAvg 1.3.6.1.4.1.9.9.769.1.1.1.1.26
The long-term average of multiple RFC3550 playout delay buffer in milliseconds to accommodate packet jitter.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxSignalLvl 1.3.6.1.4.1.9.9.769.1.1.1.1.27
The instantaneous input signal level to the telephony interface (TDM to IP network) that is used by the call leg.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cmqVoIPCallActiveRxPred107Rscore 1.3.6.1.4.1.9.9.769.1.1.1.1.28
The R-factor based MOS Listening Quality, which is listening quality minus clarity only, with no delay component. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPred107RMosListen 1.3.6.1.4.1.9.9.769.1.1.1.1.29
The MOS Listening Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPred107RScoreConv 1.3.6.1.4.1.9.9.769.1.1.1.1.30
The R-factor based MOS Conversation Quality, which is based on loss plus absolute delay. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPred107RMosConv 1.3.6.1.4.1.9.9.769.1.1.1.1.31
Th MOS Conversation Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPred107CodecIeBase 1.3.6.1.4.1.9.9.769.1.1.1.1.32
The base Ie score is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in kilobits per second.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPred107CodecBPL 1.3.6.1.4.1.9.9.769.1.1.1.1.33
The bpl is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in kilobits per second.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPred107DefaultR0 1.3.6.1.4.1.9.9.769.1.1.1.1.34
R0 is a factor based on signal-to-noise ratio which also includes loudness ratings.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPred107IeEff 1.3.6.1.4.1.9.9.769.1.1.1.1.35
Ie-eff is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Ie is a component which depends on the real-time packet loss, where as Ie-eff stands for equipment impairment factor which includes codec type and packet loss.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPred107Idd 1.3.6.1.4.1.9.9.769.1.1.1.1.36
Idd is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Idd is a delay impairment factor which depends on the real-time round trip delay and echo.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPredMosLqoAvg 1.3.6.1.4.1.9.9.769.1.1.1.1.37
The statistical average MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPredMosLqoRecent 1.3.6.1.4.1.9.9.769.1.1.1.1.38
The most recent MOS score with K-factor input based on frame loss and codec. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPredMosLqoBaseline 1.3.6.1.4.1.9.9.769.1.1.1.1.39
The maximum or codec zero-impairment baseline MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPredMosLqoMin 1.3.6.1.4.1.9.9.769.1.1.1.1.40
The statistical minimum MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPredMosLqoNumWin 1.3.6.1.4.1.9.9.769.1.1.1.1.41
A window in 8 seconds of frame loss data required to calculate the MOS estimate.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPredMosLqoBursts 1.3.6.1.4.1.9.9.769.1.1.1.1.42
The MOS score calculated with K-factor input of consecutive frame loss events, or error bursts. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPredMosLqoFrLoss 1.3.6.1.4.1.9.9.769.1.1.1.1.43
The average frame loss count since call start.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveRxPredMosLqoVerID 1.3.6.1.4.1.9.9.769.1.1.1.1.44
The MOS K-factor version ID, e.g. CVTQ v0.95
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..64)  

cmqVoIPCallActiveTxCodecId 1.3.6.1.4.1.9.9.769.1.1.1.1.45
The codec type of the endpoint for the established voice path.
Status: current Access: read-only
OBJECT-TYPE    
  CvcCoderTypeRate  

cmqVoIPCallActiveTxVadEnabled 1.3.6.1.4.1.9.9.769.1.1.1.1.46
This flag indicates whether VAD (Voice Activation Detector) is enabled or disabled. A value of 'true' indicates enabled and a value of 'false' indicates disabled. Default is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cmqVoIPCallActiveTxTmrCallDur 1.3.6.1.4.1.9.9.769.1.1.1.1.47
Duration of transmit path open from this peer to voice gateway for the call leg.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveTxTmrActSpeechDur 1.3.6.1.4.1.9.9.769.1.1.1.1.48
Duration of speech transmitted from this peer to voice gateway for the call leg.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallActiveTxSignalLvl 1.3.6.1.4.1.9.9.769.1.1.1.1.49
The instantaneous output signal level from the telephony interface (TDM to IP network) that is used by the call leg.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cmqVoIPCallActiveTxNoiseFloor 1.3.6.1.4.1.9.9.769.1.1.1.1.50
The instantaneous noise floor level estimate if VAD is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cmqCommonCallActiveNRTable 1.3.6.1.4.1.9.9.769.1.1.2
This table is the voice and VoIP extension to the callActiveTable of DIAL-CONTROL-MIB. It contains voice quality information and statistics when noise reduction is applied to the call leg.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CmqCommonCallActiveNREntry

cmqCommonCallActiveNREntry 1.3.6.1.4.1.9.9.769.1.1.2.1
An entry (conceptual row) in the cmqCommonCallActiveNRTable. An entry into this table is created when its associated call active entry in the DIAL-CONTROL-MIB is created which has corresponding callActiveInfoType equals to 'speech'. The entry is deleted when its associated call active entry in the DIAL-CONTROL-MIB is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  CmqCommonCallActiveNREntry  

cmqCommonCallActiveNRConnectionId 1.3.6.1.4.1.9.9.769.1.1.2.1.1
The global connection identifier for the active leg of the call.
Status: current Access: read-only
OBJECT-TYPE    
  CvcGUid  

cmqCommonCallActiveNRCallReferenceId 1.3.6.1.4.1.9.9.769.1.1.2.1.2
The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a reference ID greater than zero.
Status: current Access: read-only
OBJECT-TYPE    
  CvcCallReferenceIdOrZero  

cmqCommonCallActiveNRCallType 1.3.6.1.4.1.9.9.769.1.1.2.1.3
This object indicates the call type of the active call leg. tdm(1): TDM call leg. voip (2): VoIP call leg.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tdm(1), voip(2)  

cmqCommonCallActiveNREnabledMic 1.3.6.1.4.1.9.9.769.1.1.2.1.4
This flag indicates whether noise reduction is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cmqCommonCallActiveNREnabledEar 1.3.6.1.4.1.9.9.769.1.1.2.1.5
This flag indicates whether noise reduction is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cmqCommonCallActiveNRDirMic 1.3.6.1.4.1.9.9.769.1.1.2.1.6
This object indicates the direction to which noise reduction is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tdm(1), wan(2), lan(3)  

cmqCommonCallActiveNRDirEar 1.3.6.1.4.1.9.9.769.1.1.2.1.7
This object indicates the direction to which noise reduction is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tdm(1), wan(2), lan(3)  

cmqCommonCallActiveNRLibVer 1.3.6.1.4.1.9.9.769.1.1.2.1.8
The library version of noise reduction module being used.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallActiveNRIntensity 1.3.6.1.4.1.9.9.769.1.1.2.1.9
The intensity of the noise reduction being applied to audio signals.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..6  

cmqCommonCallActivePreNRNoiseFloorEstMic 1.3.6.1.4.1.9.9.769.1.1.2.1.10
The estimated noise floor level before noise redunction is applied in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cmqCommonCallActivePostNRNoiseFloorEstMic 1.3.6.1.4.1.9.9.769.1.1.2.1.11
The estimated noise floor level after noise redunction is applied in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cmqCommonCallActivePreNRNoiseFloorEstEar 1.3.6.1.4.1.9.9.769.1.1.2.1.12
The estimated noise floor level before noise redunction is applied in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cmqCommonCallActivePostNRNoiseFloorEstEar 1.3.6.1.4.1.9.9.769.1.1.2.1.13
The estimated noise floor level after noise redunction is applied in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cmqCommonCallActiveASPTable 1.3.6.1.4.1.9.9.769.1.1.3
This table is the voice and VoIP extension to the callActiveTable of DIAL-CONTROL-MIB. It contains voice quality information and statistics when acoustic shock protection is applied to the call leg.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CmqCommonCallActiveASPEntry

cmqCommonCallActiveASPEntry 1.3.6.1.4.1.9.9.769.1.1.3.1
An entry (conceptual row) in the cmqCommonCallActiveASPTable. An entry into this table is created when its associated call active entry in the DIAL-CONTROL-MIB is created which has corresponding callActiveInfoType equals to 'speech'. The entry is deleted when its associated call active entry in the DIAL-CONTROL-MIB is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  CmqCommonCallActiveASPEntry  

cmqCommonCallActiveASPConnectionId 1.3.6.1.4.1.9.9.769.1.1.3.1.1
The global connection identifier for the active leg of the call.
Status: current Access: read-only
OBJECT-TYPE    
  CvcGUid  

cmqCommonCallActiveASPCallReferenceId 1.3.6.1.4.1.9.9.769.1.1.3.1.2
The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a reference ID greater than zero.
Status: current Access: read-only
OBJECT-TYPE    
  CvcCallReferenceIdOrZero  

cmqCommonCallActiveASPCallType 1.3.6.1.4.1.9.9.769.1.1.3.1.3
This object indicates the call type of the active call leg. tdm (1): TDM call leg. voip (2): VoIP call leg.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tdm(1), voip(2)  

cmqCommonCallActiveASPEnabledMic 1.3.6.1.4.1.9.9.769.1.1.3.1.4
This flag indicates whether acoustic shock protection is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cmqCommonCallActiveASPEnabledEar 1.3.6.1.4.1.9.9.769.1.1.3.1.5
This flag indicates whether acoustic shock protection is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cmqCommonCallActiveASPDirMic 1.3.6.1.4.1.9.9.769.1.1.3.1.6
This object indicates the direction to which acoustic shock protection is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tdm(1), wan(2), lan(3)  

cmqCommonCallActiveASPDirEar 1.3.6.1.4.1.9.9.769.1.1.3.1.7
This object indicates the direction to which acoustic shock protection is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tdm(1), wan(2), lan(3)  

cmqCommonCallActiveASPMode 1.3.6.1.4.1.9.9.769.1.1.3.1.8
The acoutsic shock protection mode indicates the sensitivity of operation. auto (1): default mode, a trade-off between slow and fast mode, slow (2): slower detection mode, fast (3): faster detection mode, expert (4): expert defined mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), slow(2), fast(3), expert(4)  

cmqCommonCallActiveASPVer 1.3.6.1.4.1.9.9.769.1.1.3.1.9
The version of acoustic shock protection applied to the audio signal.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallActiveNumSigASPTriggMic 1.3.6.1.4.1.9.9.769.1.1.3.1.10
The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallActiveDurSigASPTriggMic 1.3.6.1.4.1.9.9.769.1.1.3.1.11
The cumulative duration of all significant aooustic shock protection triggers in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallActiveTotNumASPTriggMic 1.3.6.1.4.1.9.9.769.1.1.3.1.12
The total number of acoustic shock protection triggers in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallActiveTotASPDurMic 1.3.6.1.4.1.9.9.769.1.1.3.1.13
The total duration of active acoustic shock protection suppression in milliseconds in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallActiveLoudestFreqEstForLongEpiMic 1.3.6.1.4.1.9.9.769.1.1.3.1.14
The loudest frequency estimate for the longest acoustic shock protection episode in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallActiveLongestDurEpiMic 1.3.6.1.4.1.9.9.769.1.1.3.1.15
The duration of the longest acoustic shock protection episode in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallActiveNumSigASPTriggEar 1.3.6.1.4.1.9.9.769.1.1.3.1.16
The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallActiveDurSigASPTriggEar 1.3.6.1.4.1.9.9.769.1.1.3.1.17
The cumulative duration of all significant aooustic shock protection triggers in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallActiveTotNumASPTriggEar 1.3.6.1.4.1.9.9.769.1.1.3.1.18
The total number of acoustic shock protection triggers in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallActiveTotASPDurEar 1.3.6.1.4.1.9.9.769.1.1.3.1.19
The total duration of active acoustic shock protection suppression in milliseconds in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallActiveLoudestFreqEstForLongEpiEar 1.3.6.1.4.1.9.9.769.1.1.3.1.20
The loudest frequency estimate for the longest acoustic shock protection episode in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallActiveLongestDurEpiEar 1.3.6.1.4.1.9.9.769.1.1.3.1.21
The duration of the longest acoustic shock protection episode in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryTable 1.3.6.1.4.1.9.9.769.1.2.1
This table is the VoIP extension to the cCallHistoryTable of CISCO-DIAL-CONTROL-MIB. It contains voice quality information and statistics for the VoIP call leg.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CmqVoIPCallHistoryEntry

cmqVoIPCallHistoryEntry 1.3.6.1.4.1.9.9.769.1.2.1.1
An entry (conceptual row) in the cmqVoIPCallHistoryTable. An entry into this table is created when its associated call history entry in the CISCO-DIAL-CONTROL-MIB is created which has corresponding cCallHistoryInfoType equals to 'speech'. The entry is deleted when its associated call history entry in the CISCO-DIAL-CONTROL-MIB is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  CmqVoIPCallHistoryEntry  

cmqVoIPCallHistoryConnectionId 1.3.6.1.4.1.9.9.769.1.2.1.1.1
The global connection identifier for the VoIP leg of the call.
Status: current Access: read-only
OBJECT-TYPE    
  CvcGUid  

cmqVoIPCallHistoryCallReferenceId 1.3.6.1.4.1.9.9.769.1.2.1.1.2
The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a reference ID greater than zero.
Status: current Access: read-only
OBJECT-TYPE    
  CvcCallReferenceIdOrZero  

cmqVoIPCallHistoryRxCodecId 1.3.6.1.4.1.9.9.769.1.2.1.1.3
The codec type of the endpoint for the established voice path.
Status: current Access: read-only
OBJECT-TYPE    
  CvcCoderTypeRate  

cmqVoIPCallHistoryRxSevConcealRatioPct 1.3.6.1.4.1.9.9.769.1.2.1.1.4
The ratio of severely concealed seconds to the sum of unimpaired seconds and concealed seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxCallConcealRatioPct 1.3.6.1.4.1.9.9.769.1.2.1.1.5
The ratio of the recent concealment time to recent talk-mode time interval. The talk-mode interval is 3 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPktLossRatioPct 1.3.6.1.4.1.9.9.769.1.2.1.1.6
The ratio of total effective received packet loss to the number of RTP packets expected.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxRoundTripTime 1.3.6.1.4.1.9.9.769.1.2.1.1.7
The round-trip delay is the sum of measured network delay plus transmit and receive endpoint processing delays.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxCallDur 1.3.6.1.4.1.9.9.769.1.2.1.1.8
Duration of receive path open from this peer to voice gateway for the call leg.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxVoiceDur 1.3.6.1.4.1.9.9.769.1.2.1.1.9
Duration of speech received from this peer to voice gateway for the call leg.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPktLossConcealDur 1.3.6.1.4.1.9.9.769.1.2.1.1.10
The sum of error predictive concealment and bad protocol concealment in milliseconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPktCntExpected 1.3.6.1.4.1.9.9.769.1.2.1.1.11
The expected number of packets to be received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallHistoryRxPktCntNotArrived 1.3.6.1.4.1.9.9.769.1.2.1.1.12
The expected number of packets minus the number of received packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallHistoryRxPktCntComfortNoise 1.3.6.1.4.1.9.9.769.1.2.1.1.13
The number of received comfort noise packets for the call leg.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallHistoryRxPktCntUnusableLate 1.3.6.1.4.1.9.9.769.1.2.1.1.14
The number of received voice packets that arrived too late to playout with CODEC (Coder/Decoder) during the call.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallHistoryRxPktCntDiscarded 1.3.6.1.4.1.9.9.769.1.2.1.1.15
The sum of the number of late packets and the number of bad protocol packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallHistoryRxPktCntEffLoss 1.3.6.1.4.1.9.9.769.1.2.1.1.16
The total number of never-arrived packets and the number of discarded packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallHistoryRxUnimpairedSecOK 1.3.6.1.4.1.9.9.769.1.2.1.1.17
The cumulative number of seconds during which there was no concealment and is considered as OK seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallHistoryRxConcealSec 1.3.6.1.4.1.9.9.769.1.2.1.1.18
The cumulative number of seconds during which there was some concealment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallHistoryRxSevConcealSec 1.3.6.1.4.1.9.9.769.1.2.1.1.19
The total number of seconds that are severely concealed from the start of the voice stream. A severly concealed second has more than 50ms of concealment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cmqVoIPCallHistoryRxJBufMode 1.3.6.1.4.1.9.9.769.1.2.1.1.20
The jitter buffer mode configured for the endpoint. adaptive(1): an adaptive size algorithm for jitter buffer, fixed (2): a fixed size algorithm for jitter buffer, unknown (3): an unknown size algorithm for jitter buffer, disabled (4): no jitter buffer is configured.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER adaptive(1), fixed(2), unknown(3), disabled(4)  

cmqVoIPCallHistoryRxJBufNomDelay 1.3.6.1.4.1.9.9.769.1.2.1.1.21
The nominal jitter buffer playout delay in milliseconds configured for the endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxJBufDlyNow 1.3.6.1.4.1.9.9.769.1.2.1.1.22
The playout delay buffer in milliseconds to accommodate interarrival jitter. The interarrival jitter is the network arrival jitter between consecutive frames measured at the receiver.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxJBufLowWater 1.3.6.1.4.1.9.9.769.1.2.1.1.23
The minimum jitter buffer playout delay in milliseconds configured for the endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxJBuffHiWater 1.3.6.1.4.1.9.9.769.1.2.1.1.24
The maximum jitter buffer playout delay in milliseconds configured for the endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistory3550JShortTermAvg 1.3.6.1.4.1.9.9.769.1.2.1.1.25
The instantaneous RFC3550 playout delay buffer in milliseconds to accommodate packet jitter.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistory3550JCallAvg 1.3.6.1.4.1.9.9.769.1.2.1.1.26
The long-term average of multiple RFC3550 playout delay buffer in milliseconds to accommodate packet jitter.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxSignalLvl 1.3.6.1.4.1.9.9.769.1.2.1.1.27
The instantaneous input signal level to the telephony interface (TDM to IP network) that is used by the call leg.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cmqVoIPCallHistoryRxPred107Rscore 1.3.6.1.4.1.9.9.769.1.2.1.1.28
The R-factor based MOS Listening Quality, which is listening quality minus clarity only, with no delay component. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPred107RMosListen 1.3.6.1.4.1.9.9.769.1.2.1.1.29
The MOS Listening Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPred107RScoreConv 1.3.6.1.4.1.9.9.769.1.2.1.1.30
The R-factor based MOS Conversation Quality, which is based on loss plus absolute delay. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPred107RMosConv 1.3.6.1.4.1.9.9.769.1.2.1.1.31
Th MOS Conversation Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPred107CodecIeBase 1.3.6.1.4.1.9.9.769.1.2.1.1.32
The base Ie score is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in killobits per second.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPred107CodecBPL 1.3.6.1.4.1.9.9.769.1.2.1.1.33
The bpl is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in kilobits per second.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPred107DefaultR0 1.3.6.1.4.1.9.9.769.1.2.1.1.34
R0 is a factor based on signal-to-noise ratio which also includes loudness ratings.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPred107IeEff 1.3.6.1.4.1.9.9.769.1.2.1.1.35
Ie-eff is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Ie is a component which depends on the real-time packet loss, where as Ie-eff stands for equipment impairment factor which includes codec type and packet loss.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPred107Idd 1.3.6.1.4.1.9.9.769.1.2.1.1.36
Idd is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Idd is a delay impairment factor which depends on the real-time round trip delay and echo.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPredMosLqoAvg 1.3.6.1.4.1.9.9.769.1.2.1.1.37
The statistical average MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPredMosLqoRecent 1.3.6.1.4.1.9.9.769.1.2.1.1.38
The most recent MOS score with K-factor input based on frame loss and codec. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPredMosLqoBaseline 1.3.6.1.4.1.9.9.769.1.2.1.1.39
The maximum or codec zero-impairment baseline MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPredMosLqoMin 1.3.6.1.4.1.9.9.769.1.2.1.1.40
The statistical minimum MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPredMosLqoNumWin 1.3.6.1.4.1.9.9.769.1.2.1.1.41
A window in 8 seconds of frame loss data required to calculate the MOS estimate.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPredMosLqoBursts 1.3.6.1.4.1.9.9.769.1.2.1.1.42
The MOS score calculated with K-factor input of consecutive frame loss events, or error bursts. A value of 0 indicates an invalid score and a positive value indicates a valid score.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPredMosLqoFrLoss 1.3.6.1.4.1.9.9.769.1.2.1.1.43
The average frame loss count since call start.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryRxPredMosLqoVerID 1.3.6.1.4.1.9.9.769.1.2.1.1.44
The MOS K-factor version ID, e.g. CVTQ v0.95
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..64)  

cmqVoIPCallHistoryTxCodecId 1.3.6.1.4.1.9.9.769.1.2.1.1.45
The codec type of the endpoint for the established voice path.
Status: current Access: read-only
OBJECT-TYPE    
  CvcCoderTypeRate  

cmqVoIPCallHistoryTxVadEnabled 1.3.6.1.4.1.9.9.769.1.2.1.1.46
This flag indicates whether VAD (Voice Activation Detector) is enabled or disabled. A value of 'true' indicates enabled and a value of 'false' indicates disabled. Default is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cmqVoIPCallHistoryTxTmrCallDur 1.3.6.1.4.1.9.9.769.1.2.1.1.47
Duration of transmit path open from this peer to voice gateway for the call leg.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryTxTmrActSpeechDur 1.3.6.1.4.1.9.9.769.1.2.1.1.48
Duration of speech transmitted from this peer to voice gateway for the call leg.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVoIPCallHistoryTxSignalLvl 1.3.6.1.4.1.9.9.769.1.2.1.1.49
The instantaneous output signal level from the telephony interface (TDM to IP network) that is used by the call leg.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cmqVoIPCallHistoryTxNoiseFloor 1.3.6.1.4.1.9.9.769.1.2.1.1.50
The instantaneous noise floor level estimate if VAD is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cmqCommonCallHistoryNRTable 1.3.6.1.4.1.9.9.769.1.2.2
This table is the voice and VoIP extension to the cCallHistoryTable of CISCO-DIAL-CONTROL-MIB. It contains voice quality information and statistics when noise reduction is applied to the call leg.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CmqCommonCallHistoryNREntry

cmqCommonCallHistoryNREntry 1.3.6.1.4.1.9.9.769.1.2.2.1
An entry (conceptual row) in the cmqCommonCallHistoryTable. An entry into this table is created when its associated call history entry in the CISCO-DIAL-CONTROL-MIB is created which has corresponding cCallHistoryInfoType equals to 'speech'. The entry is deleted when its associated call history entry in the CISCO-DIAL-CONTROL-MIB is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  CmqCommonCallHistoryNREntry  

cmqCommonCallHistoryNRConnectionId 1.3.6.1.4.1.9.9.769.1.2.2.1.1
The global connection identifier for the history leg of the call.
Status: current Access: read-only
OBJECT-TYPE    
  CvcGUid  

cmqCommonCallHistoryNRCallReferenceId 1.3.6.1.4.1.9.9.769.1.2.2.1.2
The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a reference ID greater than zero.
Status: current Access: read-only
OBJECT-TYPE    
  CvcCallReferenceIdOrZero  

cmqCommonCallHistoryNRCallType 1.3.6.1.4.1.9.9.769.1.2.2.1.3
This object indicates the call type of the history call leg. tdm (1): TDM call leg. voip (2): VoIP call leg.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tdm(1), voip(2)  

cmqCommonCallHistoryNREnabledMic 1.3.6.1.4.1.9.9.769.1.2.2.1.4
This flag indicates whether noise reduction is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cmqCommonCallHistoryNREnabledEar 1.3.6.1.4.1.9.9.769.1.2.2.1.5
This flag indicates whether noise reduction is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cmqCommonCallHistoryNRDirMic 1.3.6.1.4.1.9.9.769.1.2.2.1.6
This object indicates the direction to which noise reduction is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tdm(1), wan(2), lan(3)  

cmqCommonCallHistoryNRDirEar 1.3.6.1.4.1.9.9.769.1.2.2.1.7
This object indicates the direction to which noise reduction is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tdm(1), wan(2), lan(3)  

cmqCommonCallHistoryNRLibVer 1.3.6.1.4.1.9.9.769.1.2.2.1.8
The library version of noise reduction module being used.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallHistoryNRIntensity 1.3.6.1.4.1.9.9.769.1.2.2.1.9
The intensity of the noise reduction being applied to audio signals.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..6  

cmqCommonCallHistoryPreNRNoiseFloorEstMic 1.3.6.1.4.1.9.9.769.1.2.2.1.10
The estimated noise floor level before noise redunction is applied in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cmqCommonCallHistoryPostNRNoiseFloorEstMic 1.3.6.1.4.1.9.9.769.1.2.2.1.11
The estimated noise floor level after noise redunction is applied in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cmqCommonCallHistoryPreNRNoiseFloorEstEar 1.3.6.1.4.1.9.9.769.1.2.2.1.12
The estimated noise floor level before noise redunction is applied in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cmqCommonCallHistoryPostNRNoiseFloorEstEar 1.3.6.1.4.1.9.9.769.1.2.2.1.13
The estimated noise floor level after noise redunction is applied in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cmqCommonCallHistoryASPTable 1.3.6.1.4.1.9.9.769.1.2.3
This table is the voice and VoIP extension to the cCallHistoryTable of CISCO-DIAL-CONTROL-MIB. It contains voice quality information and statistics when acoustic shock protection is applied to the call leg.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CmqCommonCallHistoryASPEntry

cmqCommonCallHistoryASPEntry 1.3.6.1.4.1.9.9.769.1.2.3.1
An entry (conceptual row) in the cmqCommonCallHistoryTable. An entry into this table is created when its associated call history entry in the CISCO-DIAL-CONTROL-MIB is created which has corresponding cCallHistoryInfoType equals to 'speech'. The entry is deleted when its associated call history entry in the CISCO-DIAL-CONTROL-MIB is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  CmqCommonCallHistoryASPEntry  

cmqCommonCallHistoryASPConnectionId 1.3.6.1.4.1.9.9.769.1.2.3.1.1
The global connection identifier for the history leg of the call.
Status: current Access: read-only
OBJECT-TYPE    
  CvcGUid  

cmqCommonCallHistoryASPCallReferenceId 1.3.6.1.4.1.9.9.769.1.2.3.1.2
The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not have a video call entry associated with it, although an audio-only call can also have a reference ID greater than zero.
Status: current Access: read-only
OBJECT-TYPE    
  CvcCallReferenceIdOrZero  

cmqCommonCallHistoryASPCallType 1.3.6.1.4.1.9.9.769.1.2.3.1.3
This object indicates the call type of the history call leg. tdm (1): TDM call leg voip (2): VoIP call leg.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tdm(1), voip(2)  

cmqCommonCallHistoryASPEnabledMic 1.3.6.1.4.1.9.9.769.1.2.3.1.4
This flag indicates whether acoustic shock protection is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cmqCommonCallHistoryASPEnabledEar 1.3.6.1.4.1.9.9.769.1.2.3.1.5
This flag indicates whether acoustic shock protection is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a value of 'false' indicates disabled. Default is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cmqCommonCallHistoryASPDirMic 1.3.6.1.4.1.9.9.769.1.2.3.1.6
This object indicates the direction to which acoustic shock protection is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tdm(1), wan(2), lan(3)  

cmqCommonCallHistoryASPDirEar 1.3.6.1.4.1.9.9.769.1.2.3.1.7
This object indicates the direction to which acoustic shock protection is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2): audio stream is from WAN, lan (3): audio stream is from LAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tdm(1), wan(2), lan(3)  

cmqCommonCallHistoryASPMode 1.3.6.1.4.1.9.9.769.1.2.3.1.8
The acoutsic shock protection mode indicates the sensitivity of operation. auto (1): default mode, a trade-off between slow and fast mode, slow (2): slower detection mode, fast (3): faster detection mode, expert (4): expert defined mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), slow(2), fast(3), expert(4)  

cmqCommonCallHistoryASPVer 1.3.6.1.4.1.9.9.769.1.2.3.1.9
The version of acoutsic shock protection applied to audio signals.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cmqCommonCallHistoryNumSigASPTriggMic 1.3.6.1.4.1.9.9.769.1.2.3.1.10
The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallHistoryDurSigASPTriggMic 1.3.6.1.4.1.9.9.769.1.2.3.1.11
The cumulative duration of all significant aooustic shock protection triggers in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallHistoryTotNumASPTriggMic 1.3.6.1.4.1.9.9.769.1.2.3.1.12
The total number of acoustic shock protection triggers in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallHistoryTotASPDurMic 1.3.6.1.4.1.9.9.769.1.2.3.1.13
The total duration of acoustic shock protection suppression in milliseconds in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallHistoryLoudestFreqEstForLongEpiMic 1.3.6.1.4.1.9.9.769.1.2.3.1.14
The loudest frequency estimate for the longest acoustic shock protection episode in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallHistoryLongestDurEpiMic 1.3.6.1.4.1.9.9.769.1.2.3.1.15
The duration of the longest acoustic shock protection episode in the MIC direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallHistoryNumSigASPTriggEar 1.3.6.1.4.1.9.9.769.1.2.3.1.16
The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallHistoryDurSigASPTriggEar 1.3.6.1.4.1.9.9.769.1.2.3.1.17
The cumulative duration of all significant aooustic shock protection triggers in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallHistoryTotNumASPTriggEar 1.3.6.1.4.1.9.9.769.1.2.3.1.18
The total number of acoustic shock protection triggers in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallHistoryTotASPDurEar 1.3.6.1.4.1.9.9.769.1.2.3.1.19
The total duration of acoustic shock protection suppression in milliseconds in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallHistoryLoudestFreqEstForLongEpiEar 1.3.6.1.4.1.9.9.769.1.2.3.1.20
The loudest frequency estimate for the longest acoustic shock protection episode in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqCommonCallHistoryLongestDurEpiEar 1.3.6.1.4.1.9.9.769.1.2.3.1.21
The duration of the longest acoustic shock protection episode in the ear direction.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cmqVideoCallActiveTable 1.3.6.1.4.1.9.9.769.1.3.1
This table is the video extension to the call active table of DIAL-CONTROL-MIB. It contains video quality information for the VoIP call leg.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CmqVideoCallActiveEntry

cmqVideoCallActiveEntry 1.3.6.1.4.1.9.9.769.1.3.1.1
An entry (conceptual row) in the cmqVideoCallActiveTable. An entry is added to the table when the below conditions are met: 1. A call active entry in callActiveTable of the IETF Dial Control MIB with video callActiveInfoType is created. 2. An entry in cVideoCommonActiveTable of the Cisco Video Session MIB is created whose cVideoCommonActiveCallType is pointToPointCall, conferenceCall, or monitoredCall. The entry is deleted when its associated call active entry in callActiveTable of the IETF Dial Control MIB is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  CmqVideoCallActiveEntry  

cmqVideoCallActiveConnectionId 1.3.6.1.4.1.9.9.769.1.3.1.1.1
The global connection identifier for the video leg of the call.
Status: current Access: read-only
OBJECT-TYPE    
  CvcGUid  

cmqVideoCallActiveCallReferenceId 1.3.6.1.4.1.9.9.769.1.3.1.1.2
The call reference ID associates the video call entry and voice call entry of the same endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  CvcCallReferenceIdOrZero  

cmqVideoCallActiveRxMOSInstant 1.3.6.1.4.1.9.9.769.1.3.1.1.3
Instantaneous aggregated MOS in the receive direction, where 0 is an invalid score and the lowest score starts with 1. A value of 100 indicates the best video quality.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

cmqVideoCallActiveRxCompressDegradeInstant 1.3.6.1.4.1.9.9.769.1.3.1.1.4
The percentage of quality loss (indicated by RX instantaneous MOS) due to the initial compression of video at an end point introduced by a video encoder.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

cmqVideoCallActiveRxNetworkDegradeInstant 1.3.6.1.4.1.9.9.769.1.3.1.1.5
The percentage of quality loss (indicated by RX instantaneous MOS) due to network factors, such as jitter, delay and packet loss.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

cmqVideoCallActiveRxTransscodeDegradeInstant 1.3.6.1.4.1.9.9.769.1.3.1.1.6
The percentage of quality loss (indicated by RX instantaneous MOS) due to the transcoding, including transrating, of a video stream.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

cmqVideoCallActiveRxMOSAverage 1.3.6.1.4.1.9.9.769.1.3.1.1.7
Average aggregated MOS in the receive direction since the beginning of the video session. 0 indicates an invalid score and the lowest score starts with 1. A value of 100 indicates the best video quality.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

cmqVideoCallActiveRxCompressDegradeAverage 1.3.6.1.4.1.9.9.769.1.3.1.1.8
The percentage of quality loss (indicated by RX average MOS) due to the initial compression of video at an end point introduced by a video encoder.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

cmqVideoCallActiveRxNetworkDegradeAverage 1.3.6.1.4.1.9.9.769.1.3.1.1.9
The percentage of quality loss (indicated by RX average MOS) due to network factors, such as jitter, delay and packet loss.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

cmqVideoCallActiveRxTransscodeDegradeAverage 1.3.6.1.4.1.9.9.769.1.3.1.1.10
The percentage of quality loss (indicated by RX average MOS) due to the transcoding, including transrating, of a video stream.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

cmqVideoCallHistoryTable 1.3.6.1.4.1.9.9.769.1.4.1
This table is the video extension to the call history table of CISCO-DIAL-CONTROL-MIB. It contains video quality information for the VoIP call leg.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CmqVideoCallHistoryEntry

cmqVideoCallHistoryEntry 1.3.6.1.4.1.9.9.769.1.4.1.1
An entry (conceptual row) in the cmqVideoCallHistoryTable. An entry is added to the table when the below conditions are met: 1. A call history entry in cCallHistoryTable of the Cisco Dial Control MIB with video cCallHistoryInfoType is created. 2. An entry in cVideoCommonActiveTable of the Cisco Video Session MIB is created whose cVideoCommonActiveCallType is pointToPointCall, conferenceCall, or monitoredCall. The entry is deleted when its associated call history entriy in cCallHistoryTable of the Cisco Dial Control MIB is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  CmqVideoCallHistoryEntry  

cmqVideoCallHistoryConnectionId 1.3.6.1.4.1.9.9.769.1.4.1.1.1
The global connection identifier for the video leg of the call.
Status: current Access: read-only
OBJECT-TYPE    
  CvcGUid  

cmqVideoCallHistoryCallReferenceId 1.3.6.1.4.1.9.9.769.1.4.1.1.2
The call reference ID associates the video call entry and voice call entry of the same endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  CvcCallReferenceIdOrZero  

cmqVideoCallHistoryRxMOSAverage 1.3.6.1.4.1.9.9.769.1.4.1.1.3
Average aggregated MOS in the receive direction since the beginning of the video session. 0 indicates an invalid score and the lowest score starts with 1. A value of 100 indicates the best video quality.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

cmqVideoCallHistoryRxCompressDegradeAverage 1.3.6.1.4.1.9.9.769.1.4.1.1.4
The percentage of quality loss (indicated by RX average MOS) due to the initial compression of video at an end point introduced by a video encoder.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

cmqVideoCallHistoryRxNetworkDegradeAverage 1.3.6.1.4.1.9.9.769.1.4.1.1.5
The percentage of quality loss (indicated by RX average MOS) due to network factors, such as jitter, delay and packet loss.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

cmqVideoCallHistoryRxTransscodeDegradeAverage 1.3.6.1.4.1.9.9.769.1.4.1.1.6
The percentage of quality loss (indicated by RX average MOS) due to the transcoding, including transrating, of a video stream.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

ciscoMediaQualityMIBGroups 1.3.6.1.4.1.9.9.769.2.2
OBJECT IDENTIFIER    

ciscoMediaQualityMIBCompliance 1.3.6.1.4.1.9.9.769.2.1.1
The compliance statement for the SNMP entities that implement ciscoMediaQualityMIB module.
Status: current Access: read-only
MODULE-COMPLIANCE    

cmqVoiceCallActiveGroup 1.3.6.1.4.1.9.9.769.2.2.1
The collection of objects that provide voice quality statistics for active voice calls.
Status: current Access: read-only
OBJECT-GROUP    

cmqVoiceCallHistoryGroup 1.3.6.1.4.1.9.9.769.2.2.2
The collection of objects that provide voice quality statistics for history voice calls.
Status: current Access: read-only
OBJECT-GROUP    

cmqVideoCallActiveGroup 1.3.6.1.4.1.9.9.769.2.2.3
The collection of objects that provide video quality statistics for active video calls.
Status: current Access: read-only
OBJECT-GROUP    

cmqVideoCallHistoryGroup 1.3.6.1.4.1.9.9.769.2.2.4
The collection of objects that provide video quality statistics for history video calls.
Status: current Access: read-only
OBJECT-GROUP