CISCO-NBAR-PROTOCOL-DISCOVERY-MIB

File: CISCO-NBAR-PROTOCOL-DISCOVERY-MIB.mib (42864 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IF-MIB CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 Counter32 Counter64
TimeTicks MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP TEXTUAL-CONVENTION TruthValue
RowStatus ifIndex InterfaceIndex
ciscoMgmt

Defined Types

CiscoPdProtocolIndex  
An object which represents a unique identifier for a protocol or application which NBAR currently recognizes. The value of this object is defined in the cnpdSupportedProtocolsTable.
TEXTUAL-CONVENTION    
  Unsigned32  

CiscoPdProtocolName  
Name of an application or protocol, which NBAR is capable of recognizing. For example: ftp, vdolive and citrix.
TEXTUAL-CONVENTION    
  OCTET STRING Size(1..255)  

CiscoPdDataType  
These are the data types which NBAR can measure a particular protocol by. bitRateIn(1) - incoming bitrate. bitRateOut(2) - outgoing bitrate. bitRateSum(3) - sum of incoming and outgoing bitrate. byteCountIn(4) - incoming bytecount. byteCountOut(5) - outgoing bytecount. byteCountSum(6) - sum of incoming and outgoing bytecount. packetCountIn(7) - incoming packetcount. packetCountOut(8) - outgoing packetcount. packetCountSum(9) - sum of incoming and outgoing packetcount. UNITS: bitrate - unit is kilo bits per second bytecount - unit is bytes packetcount - unit is packets
TEXTUAL-CONVENTION    
  INTEGER bitRateIn(1), bitRateOut(2), bitRateSum(3), byteCountIn(4), byteCountOut(5), byteCountSum(6), packetCountIn(7), packetCountOut(8), packetCountSum(9)  

CnpdSupportedProtocolsEntry  
SEQUENCE    
  cnpdSupportedProtocolsIndex CiscoPdProtocolIndex
  cnpdSupportedProtocolsName CiscoPdProtocolName

CnpdStatusEntry  
SEQUENCE    
  cnpdStatusPdEnable TruthValue
  cnpdStatusLastUpdateTime TimeTicks

CnpdAllStatsEntry  
SEQUENCE    
  cnpdAllStatsProtocolsIndex CiscoPdProtocolIndex
  cnpdAllStatsProtocolName CiscoPdProtocolName
  cnpdAllStatsInPkts Counter32
  cnpdAllStatsOutPkts Counter32
  cnpdAllStatsInBytes Counter32
  cnpdAllStatsOutBytes Counter32
  cnpdAllStatsHCInPkts Counter64
  cnpdAllStatsHCOutPkts Counter64
  cnpdAllStatsHCInBytes Counter64
  cnpdAllStatsHCOutBytes Counter64
  cnpdAllStatsInBitRate Unsigned32
  cnpdAllStatsOutBitRate Unsigned32

CnpdTopNConfigEntry  
SEQUENCE    
  cnpdTopNConfigIndex Unsigned32
  cnpdTopNConfigIfIndex InterfaceIndex
  cnpdTopNConfigStatsSelect CiscoPdDataType
  cnpdTopNConfigSampleTime Unsigned32
  cnpdTopNConfigRequestedSize Unsigned32
  cnpdTopNConfigGrantedSize Unsigned32
  cnpdTopNConfigTime TimeTicks
  cnpdTopNConfigStatus RowStatus

CnpdTopNStatsEntry  
SEQUENCE    
  cnpdTopNStatsIndex Unsigned32
  cnpdTopNStatsProtocolName CiscoPdProtocolName
  cnpdTopNStatsRate Counter32
  cnpdTopNStatsHCRate Counter64

CnpdThresholdConfigEntry  
SEQUENCE    
  cnpdThresholdConfigIndex Unsigned32
  cnpdThresholdConfigIfIndex InterfaceIndex
  cnpdThresholdConfigInterval Unsigned32
  cnpdThresholdConfigSampleType INTEGER
  cnpdThresholdConfigProtocol CiscoPdProtocolIndex
  cnpdThresholdConfigProtocolAny TruthValue
  cnpdThresholdConfigStatsSelect CiscoPdDataType
  cnpdThresholdConfigStartup INTEGER
  cnpdThresholdConfigRising Unsigned32
  cnpdThresholdConfigFalling Unsigned32
  cnpdThresholdConfigStatus RowStatus

CnpdThresholdHistoryEntry  
SEQUENCE    
  cnpdThresholdHistoryIndex Unsigned32
  cnpdThresholdHistoryConfigIndex Unsigned32
  cnpdThresholdHistoryValue Unsigned32
  cnpdThresholdHistoryType INTEGER
  cnpdThresholdHistoryTime TimeTicks
  cnpdThresholdHistoryProtocol CiscoPdProtocolIndex
  cnpdThresholdHistoryStatsSelect CiscoPdDataType

Defined Values

ciscoNbarProtocolDiscoveryMIB 1.3.6.1.4.1.9.9.244
Cisco NBAR Protocol Discovery MIB NBAR - Network Based Application Recognition is an intelligent classification engine that recognizes applications that are static (which use fixed TCP or UDP port numbers), and stateful (which dynamically assign TCP or UDP port numbers). Protocol Discovery - uses NBAR to show you the mix of applications currently running on the network. Key statistics are associated with each protocol. These statistics can be used to define traffic classes and QoS policies. Functionality: 1. To enable/disable Protocol Discovery per interface. 2. Display the protocols/applications which NBAR currently recognizes. 3. To display various Protocol Discovery statistics. 4. A configurable top N table which lists protocols using user defined criteria. 5. To configure notifications (traps) based on configurable statistic thresholds. 6. To maintain a history table of all notification events.
MODULE-IDENTITY    

cnpdMIBNotifications 1.3.6.1.4.1.9.9.244.0
OBJECT IDENTIFIER    

cnpdMIBObjects 1.3.6.1.4.1.9.9.244.1
OBJECT IDENTIFIER    

cnpdMIBConformance 1.3.6.1.4.1.9.9.244.2
OBJECT IDENTIFIER    

cnpdStatus 1.3.6.1.4.1.9.9.244.1.1
OBJECT IDENTIFIER    

cnpdAllStats 1.3.6.1.4.1.9.9.244.1.2
OBJECT IDENTIFIER    

cnpdTopNConfig 1.3.6.1.4.1.9.9.244.1.3
OBJECT IDENTIFIER    

cnpdTopNStats 1.3.6.1.4.1.9.9.244.1.4
OBJECT IDENTIFIER    

cnpdThresholdConfig 1.3.6.1.4.1.9.9.244.1.5
OBJECT IDENTIFIER    

cnpdThresholdHistory 1.3.6.1.4.1.9.9.244.1.6
OBJECT IDENTIFIER    

cnpdNotificationsConfig 1.3.6.1.4.1.9.9.244.1.7
OBJECT IDENTIFIER    

cnpdSupportedProtocols 1.3.6.1.4.1.9.9.244.1.8
OBJECT IDENTIFIER    

cnpdMIBCompliances 1.3.6.1.4.1.9.9.244.2.1
OBJECT IDENTIFIER    

cnpdMIBGroups 1.3.6.1.4.1.9.9.244.2.2
OBJECT IDENTIFIER    

cnpdSupportedProtocolsTable 1.3.6.1.4.1.9.9.244.1.8.1
The Supported Protocols table lists all the protocols and applications which NBAR is currently capable of recognizing.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CnpdSupportedProtocolsEntry

cnpdSupportedProtocolsEntry 1.3.6.1.4.1.9.9.244.1.8.1.1
A entry in the Supported Protocols table reflecting key information about a protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  CnpdSupportedProtocolsEntry  

cnpdSupportedProtocolsIndex 1.3.6.1.4.1.9.9.244.1.8.1.1.1
A unique identifier of a row in this table. Thus it also represents a unique identifier for a protocol or application which NBAR currently recognizes.
Status: current Access: not-accessible
OBJECT-TYPE    
  CiscoPdProtocolIndex 1..1024  

cnpdSupportedProtocolsName 1.3.6.1.4.1.9.9.244.1.8.1.1.2
This object reflects the valid string of a protocol or application which NBAR currently recognizes.
Status: current Access: read-only
OBJECT-TYPE    
  CiscoPdProtocolName  

cnpdStatusTable 1.3.6.1.4.1.9.9.244.1.1.1
The cnpdStatusTable is used to enable and disable Protocol Discovery on an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CnpdStatusEntry

cnpdStatusEntry 1.3.6.1.4.1.9.9.244.1.1.1.1
An entry in the cnpdStatusTable contains objects for enabling or disabling Protocol Discovery on a per interface basis.
Status: current Access: not-accessible
OBJECT-TYPE    
  CnpdStatusEntry  

cnpdStatusPdEnable 1.3.6.1.4.1.9.9.244.1.1.1.1.1
This object is used to enable or disable Protocol Discovery on an interface. If set to 'true' - Protocol Discovery is enabled on this Interface. If set to 'false' - Protocol Discovery is disabled on this Interface.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cnpdStatusLastUpdateTime 1.3.6.1.4.1.9.9.244.1.1.1.1.2
The value of sysUpTime at the time Protocol Discovery was last enabled on an interface. If the interface does not have Protocol Discovery enabled this value is zero.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

cnpdAllStatsTable 1.3.6.1.4.1.9.9.244.1.2.1
The cnpdAllStatsTable contains all the statistics available for all the protocols/applications currently recognized by NBAR Protocol Discovery for a particular interface. In the event of an overflow, the 32 bit counters are not valid. There is no overflow support.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CnpdAllStatsEntry

cnpdAllStatsEntry 1.3.6.1.4.1.9.9.244.1.2.1.1
An entry in the cnpdAllStatsTable table. This entry contains the statistics collected on all the protocols which NBAR classifies for a particular interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  CnpdAllStatsEntry  

cnpdAllStatsProtocolsIndex 1.3.6.1.4.1.9.9.244.1.2.1.1.1
An object which represents a unique identifier for a protocol or application which NBAR currently recognizes. This object is an index into the SupportedProtocolsTable where details of the protocol can be found.
Status: current Access: not-accessible
OBJECT-TYPE    
  CiscoPdProtocolIndex 1..1024  

cnpdAllStatsProtocolName 1.3.6.1.4.1.9.9.244.1.2.1.1.2
Name of the application or protocol, a unique textual string, assigned in the cnpdSupportedProtocolsTable.
Status: current Access: read-only
OBJECT-TYPE    
  CiscoPdProtocolName  

cnpdAllStatsInPkts 1.3.6.1.4.1.9.9.244.1.2.1.1.3
The packet count of inbound packets as determined by Protocol Discovery.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cnpdAllStatsOutPkts 1.3.6.1.4.1.9.9.244.1.2.1.1.4
The packet count of outbound packets as determined by Protocol Discovery.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cnpdAllStatsInBytes 1.3.6.1.4.1.9.9.244.1.2.1.1.5
The byte count of inbound octets as determined by Protocol Discovery.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cnpdAllStatsOutBytes 1.3.6.1.4.1.9.9.244.1.2.1.1.6
The byte count of outbound octets as determined by Protocol Discovery.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cnpdAllStatsHCInPkts 1.3.6.1.4.1.9.9.244.1.2.1.1.7
The packet count of inbound packets as determined by Protocol Discovery. This is the 64-bit (High Capacity) version of cnpdAllStatsInPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cnpdAllStatsHCOutPkts 1.3.6.1.4.1.9.9.244.1.2.1.1.8
The packet count of outbound packets as determined by Protocol Discovery. This is the 64-bit (High Capacity) version of cnpdAllStatsOutPkts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cnpdAllStatsHCInBytes 1.3.6.1.4.1.9.9.244.1.2.1.1.9
The byte count of inbound octets as determined by Protocol Discovery. This is the 64-bit (High Capacity) version of cnpdAllStatsInBytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cnpdAllStatsHCOutBytes 1.3.6.1.4.1.9.9.244.1.2.1.1.10
The byte count of outbound octets as determined by Protocol Discovery. This is the 64-bit (High Capacity) version of cnpdAllStatsOutBytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cnpdAllStatsInBitRate 1.3.6.1.4.1.9.9.244.1.2.1.1.11
The inbound bit rate as determined by Protocol Discovery.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

cnpdAllStatsOutBitRate 1.3.6.1.4.1.9.9.244.1.2.1.1.12
The outbound bit rate as determined by Protocol Discovery.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

cnpdTopNConfigTable 1.3.6.1.4.1.9.9.244.1.3.1
The cnpdTopNConfigTable is used to configure cnpdTopNStatsTable's.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CnpdTopNConfigEntry

cnpdTopNConfigEntry 1.3.6.1.4.1.9.9.244.1.3.1.1
This entry provides the objects to configure and thus initiate the generation of a cnpdTopNStatsTable..
Status: current Access: not-accessible
OBJECT-TYPE    
  CnpdTopNConfigEntry  

cnpdTopNConfigIndex 1.3.6.1.4.1.9.9.244.1.3.1.1.1
A monotonically increasing integer which uniquely identifies a cnpdTopNConfigEntry in the cnpdTopNConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..50  

cnpdTopNConfigIfIndex 1.3.6.1.4.1.9.9.244.1.3.1.1.2
This object allows the management station to select the interface, which Protocol Discovery is running on, to be used to create this cnpdTopNConfigEntry.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

cnpdTopNConfigStatsSelect 1.3.6.1.4.1.9.9.244.1.3.1.1.3
This object allows the management station to select the statistic used to base the order of the top-n table on. For example: a cnpdTopNConfigStatsSelect of bitRateSum means order this table based on each applications/protocols combined in and out bitrate.
Status: current Access: read-create
OBJECT-TYPE    
  CiscoPdDataType  

cnpdTopNConfigSampleTime 1.3.6.1.4.1.9.9.244.1.3.1.1.4
If the cnpdTopNConfigStatsSelect is bitRateIn, bitRateOut or bitRateSum, then this value is the interval in seconds that the bitrate is sampled. This has no effect if the cnpdTopNConfigStatsSelect is byte or packet based. When this object is modified by the management station, a new sample period is started regardless of whether the original cnpdTopNConfigSampleTime was finished.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..2048  

cnpdTopNConfigRequestedSize 1.3.6.1.4.1.9.9.244.1.3.1.1.5
The requested size of the associated cnpdTopNStatsTable entry. For example a cnpdTopNConfigRequestedSize of 20 indicates the management station wants to create an associated cnpdTopNStatsTable entry of 20 protocol/application's
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..500  

cnpdTopNConfigGrantedSize 1.3.6.1.4.1.9.9.244.1.3.1.1.6
The actual size of the associated cnpdTopNStatsTable entry. The reason this may differ from cnpdTopNConfigRequestedSize is because a management station may request a number of protocols that is greater than the number of protocols actually found by Protocol Discovery.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..500  

cnpdTopNConfigTime 1.3.6.1.4.1.9.9.244.1.3.1.1.7
The value of sysUpTime when the associated cnpdTopNStatsTable entry was created.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

cnpdTopNConfigStatus 1.3.6.1.4.1.9.9.244.1.3.1.1.8
This object is used to create or delete the row entry in cnpdTopNConfigTable. When creating a row entry the management station is required to specify a value for cnpdTopNConfigIfIndex only. 'notReady' means that a row exists but either it has no valid IfIndex or it has not been set to createAndGo or active. 'active' means that a createAndGo or active has been issued, AND a valid ifIndex exists. Therefore if a row is 'active' it means a TopNStats entry has been generated. If you set an 'active' row to createAndWait it will get the status 'notReady'. If you set any row to 'notReady' - it will go to the 'notReadystate'. If you set any row to 'notInService' - it will go to the 'notInService' state and the corresponding TopNStatsEntry will be deleted. The same TopNConfig entry can be re-used without changes by setting it to 'active'. The corresponding TopStatsTable entry will be regenerated. This can be used by the NMS to poll a particular TopNConfig Entry. Changes to an existing TopNConfig entry can be made by setting the status to 'createAndWait' and changing the necessary objects. Setting it to 'createAndGo' or 'active' will cause the corresponding TopNStats entry to be regenerated.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cnpdTopNStatsTable 1.3.6.1.4.1.9.9.244.1.4.1
A cnpdTopNStatsTable describes an ordered list of protocols.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CnpdTopNStatsEntry

cnpdTopNStatsEntry 1.3.6.1.4.1.9.9.244.1.4.1.1
This entry is used to store a set of objects which describe a cnpdTopNStatsTable. A cnpdTopNStatsTable is a number of protocols and statistics sorted according to the criteria in the associated cnpdTopNConfigEntry. Therefore a cnpdTopNStatsTable can differ in content and size according to what was configured in the associated cnpdTopNConfigTableEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  CnpdTopNStatsEntry  

cnpdTopNStatsIndex 1.3.6.1.4.1.9.9.244.1.4.1.1.1
A monotonically increasing integer which uniquely identifies a cnpdTopNStatsEntry in the cnpdTopNStatsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..500  

cnpdTopNStatsProtocolName 1.3.6.1.4.1.9.9.244.1.4.1.1.2
Name of the application or protocol, a unique textual string, assigned in the cnpdSupportedProtocolsTable.
Status: current Access: read-only
OBJECT-TYPE    
  CiscoPdProtocolName  

cnpdTopNStatsRate 1.3.6.1.4.1.9.9.244.1.4.1.1.3
The amount of change in the selected statistic during this sampling interval. The selected statistic is the cnpdTopNConfigStatsSelect from the associated cnpdTopNConfigStatsEntry.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cnpdTopNStatsHCRate 1.3.6.1.4.1.9.9.244.1.4.1.1.4
The amount of change in the selected statistic during this sampling interval. The selected statistic is the cnpdTopNConfigStatsSelect from the associated cnpdTopNConfigStatsEntry. This is the 64-bit (High Capacity) version of cnpdTopNStatsRate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

cnpdThresholdConfigTable 1.3.6.1.4.1.9.9.244.1.5.1
The cnpdThresholdConfigTable allows the management station to create thresholds for the purpose of sending notifications if breached, and creating a history of breached thresholds.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CnpdThresholdConfigEntry

cnpdThresholdConfigEntry 1.3.6.1.4.1.9.9.244.1.5.1.1
This entry contains configuration information to set thresholds for the purpose of notifications. The management station is allowed to set thresholds on individual statistics for individual protocols on an interface. If the threshold is breached by the protocol statistic, a new event is written to the cnpdThresholdHistoryTable, which in turn will generate a Notification Event. This function has a hysteresis mechanism to limit the generation of events. This mechanism generates one event as a threshold is crossed in the appropriate direction. No more events are generated for that threshold until the opposite threshold is crossed. This stops repeated Notification events being generated each time the value is sampled, when the value is above the threshold. Instead one notification is sent when the threshold is breached and one notification when the statistic drops below the threshold value again.
Status: current Access: not-accessible
OBJECT-TYPE    
  CnpdThresholdConfigEntry  

cnpdThresholdConfigIndex 1.3.6.1.4.1.9.9.244.1.5.1.1.1
A monotonically increasing integer which uniquely identifies an entry in the cnpdThresholdConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..100  

cnpdThresholdConfigIfIndex 1.3.6.1.4.1.9.9.244.1.5.1.1.2
This object allows the management station to select the interface, which Protocol Discovery is running on, to be used to create this cnpdThresholdConfigTable entry.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

cnpdThresholdConfigInterval 1.3.6.1.4.1.9.9.244.1.5.1.1.3
The interval in seconds over which the data is sampled and compared with cnpdThresholdConfigRising and cnpdThresholdConfigFalling thresholds.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..2048  

cnpdThresholdConfigSampleType 1.3.6.1.4.1.9.9.244.1.5.1.1.4
The method of sampling the selected statistic and calculating the value to be compared against cnpdThresholdConfigRising or cnpdThresholdConfigFalling thresholds. If the value of this object is absoluteValue(1), the value at the end of the sampling interval cnpdThresholdConfigInterval, will be compared with the cnpdThresholdConfigRising and cnpdThresholdConfigFalling thresholds. In this mode, when cnpdThresholdConfigStatsSelect is byte or packet based, a maximum of two cnpdThresholdHistory entries will be created per application, as these byte and packet counts monotonically increase from zero. If the value of this object is deltaValue(2), the difference between the samples at the beginning and end of the cnpdThresholdConfigInterval will be compared with the cnpdThresholdConfigRising and cnpdThresholdConfigFalling thresholds. Because the difference in the previous and current samples are compared over the sample period cnpdThresholdConfigInterval, this mode provides more granularity to the thresholds because the NMS is now provided with the gradient or change in the cnpdThresholdConfigStatsSelect. Note that even though the sample value is monotonically increasing for byte and packet counts, cnpdThresholdConfigSampleType set to deltaValue, can generate falling cnpdThresholdHistory entries, because the gradient can be lower than the cnpdThresholdConfigFalling value.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER absoluteValue(1), deltaValue(2)  

cnpdThresholdConfigProtocol 1.3.6.1.4.1.9.9.244.1.5.1.1.5
The application or protocol which the management station wishes to configure a threshold on. This object is an index into the SupportedProtocolsTable where details of the protocol can be found. If cnpdThresholdConfigProtocolAny is set to TRUE this value will be ignored. If it is set to FALSE, then cnpdThresholdConfigProtocol will be the only protocol that is checked to see if it has breached the threshold.
Status: current Access: read-create
OBJECT-TYPE    
  CiscoPdProtocolIndex 1..1024  

cnpdThresholdConfigProtocolAny 1.3.6.1.4.1.9.9.244.1.5.1.1.6
If set to 'true' - this threshold is configured to check for any protocol which meets the threshold criteria. This means that multiple protocols can generate ThresholdHistoryTable entries. Each protocol is subject to the hysterisis mechanism. If set to 'false' - this threshold is configured to check for the protocol which meets the threshold criteria referred to by cnpdThresholdConfigProtocol.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

cnpdThresholdConfigStatsSelect 1.3.6.1.4.1.9.9.244.1.5.1.1.7
This object allows the management station to select the statistic used to base the threshold on. For example a cnpdThresholdConfigStatsSelect of bitRateSum means cnpdThresholdConfigRising and cnpdThresholdConfigFalling are values based on the combined value of in and out bitrates.
Status: current Access: read-create
OBJECT-TYPE    
  CiscoPdDataType  

cnpdThresholdConfigStartup 1.3.6.1.4.1.9.9.244.1.5.1.1.8
This controls the type of notification that is sent when this threshold entry is first enabled. Because there is no previous sampling history, choosing one of these options determines the type of notification generated - Rising or Falling. If the first sample after this entry is enabled is greater than or equal to cnpdThresholdConfigRising and this object is equal to rising(1) or risingOrFalling(3), then a single rising notification will be generated. If the first sample after this entry is enabled is less than or equal to cnpdThresholdConfigFalling and this object is equal to falling(2) or risingOrFalling(3), then a single falling notification will be generated.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER rising(1), falling(2), risingOrFalling(3)  

cnpdThresholdConfigRising 1.3.6.1.4.1.9.9.244.1.5.1.1.9
This is the threshold object which the managment station sets to determine if it gets breached. It indicates the statistic being sampled was rising. When the current sample is greater than or equal to this object, and the value at the last sampling interval was less than this object (in other words the value is rising), an entry in the cnpdThresholdHistoryTable will be created. After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the cnpdThresholdConfigFalling value. This ensures that samples which are taken after a cnpdThresholdConfigRising threshold event has been created, do not create further thresholds and therefore notifications, until the cnpdThresholdConfigFalling threshold has been met. Thus a very short cnpdThresholdConfigInterval can be chosen without risk of multiple notifications for the same threshold breach condition.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..4294967295  

cnpdThresholdConfigFalling 1.3.6.1.4.1.9.9.244.1.5.1.1.10
This is the threshold object which the management station sets to determine if it gets breached. It indicates the statistic being sampled was falling. When current sample is less than or equal to this object, and the value at the last sampling interval was greater than this object (in other words the value is falling), an entry in the cnpdThresholdHistoryTable will be created. After a falling event is generated, another such event will not be generated until the sampled value rises above this object and reaches the cnpdThresholdConfigRising value.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..4294967295  

cnpdThresholdConfigStatus 1.3.6.1.4.1.9.9.244.1.5.1.1.12
This object is used to create or delete the row entry in cnpdThresholdConfigTable. When creating a row entry the management station is required to specify a value for cnpdThresholdConfigIfIndex, cnpdThresholdConfigRising and cnpdThresholdConfigFalling. 'active' means that a createAndGo or active has been issued, AND a valid ifIndex exists. And therefore if a row is 'active' it means a ThresholdHistory entry may have been generated if the value was breached. If you set an 'active' row to 'createAndWait' - it will in fact get the status 'notReady'. Likewise if you set any row to 'notInService' or 'notReady' it will go to the 'notReady' state.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cnpdThresholdHistoryTable 1.3.6.1.4.1.9.9.244.1.6.1
The Threshold History table. Notifications are unreliable so this table provides a history of the last 5000 threshold breached events. A notification can be traced back to its cnpdThresholdHistoryEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CnpdThresholdHistoryEntry

cnpdThresholdHistoryEntry 1.3.6.1.4.1.9.9.244.1.6.1.1
This entry is created each time a threshold is breached. Thus there is not necessarily a one to one relationship to cnpdThresholdConfigTable as not every Threshold configured will be breached.
Status: current Access: not-accessible
OBJECT-TYPE    
  CnpdThresholdHistoryEntry  

cnpdThresholdHistoryIndex 1.3.6.1.4.1.9.9.244.1.6.1.1.1
A monotonically increasing integer which uniquely identifies this cnpdThresholdHistoryEntry in the cnpdThresholdHistory table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..1000  

cnpdThresholdHistoryConfigIndex 1.3.6.1.4.1.9.9.244.1.6.1.1.2
The cnpdThresholdConfigTable entry which generated this entry. Using this object the management station can backtrack to the appropriate cnpdThresholdConfigEntry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..1000  

cnpdThresholdHistoryValue 1.3.6.1.4.1.9.9.244.1.6.1.1.3
The actual value of the statistic when the sampling was made.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

cnpdThresholdHistoryType 1.3.6.1.4.1.9.9.244.1.6.1.1.4
Describes whether this is an event caused by a rising or falling threshold breach.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER risingBreach(1), fallingBreach(2)  

cnpdThresholdHistoryTime 1.3.6.1.4.1.9.9.244.1.6.1.1.5
The value of sysUpTime of the running configuration when the event occurred.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

cnpdThresholdHistoryProtocol 1.3.6.1.4.1.9.9.244.1.6.1.1.6
The application or protocol which the management station configured a threshold on. This object is an index into the SupportedProtocolsTable where details of the protocol can be found.
Status: current Access: read-only
OBJECT-TYPE    
  CiscoPdProtocolIndex 1..1024  

cnpdThresholdHistoryStatsSelect 1.3.6.1.4.1.9.9.244.1.6.1.1.7
This is the statistic used to base the threshold on.
Status: current Access: read-only
OBJECT-TYPE    
  CiscoPdDataType  

cnpdNotificationsEnable 1.3.6.1.4.1.9.9.244.1.7.1
This object is used to enable or disable Notifications on a global basis. If set to 'true' - Notifications are enabled. If set to 'false' - Notifications are disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cnpdThresholdRisingEvent 1.3.6.1.4.1.9.9.244.0.1
A cnpdThresholdRisingEvent is sent whenever a notification entry crosses its rising threshold and generates an event that is added to the cnpdThresholdHistoryTable.
Status: current Access: read-write
NOTIFICATION-TYPE    

cnpdThresholdFallingEvent 1.3.6.1.4.1.9.9.244.0.2
A cnpdThresholdConfigFallingEvent is sent whenever a notification entry crosses its falling threshold and generates an event that is added to the cnpdThresholdHistoryTable.
Status: current Access: read-write
NOTIFICATION-TYPE    

cnpdMIBCompliance 1.3.6.1.4.1.9.9.244.2.1.1
The compliance statement for entities that implement NBAR Protocol Discovery on a Cisco router.
Status: current Access: read-write
MODULE-COMPLIANCE    

cnpdStatsGroup 1.3.6.1.4.1.9.9.244.2.2.1
Required objects to provide protocol application discovery info.
Status: current Access: read-write
OBJECT-GROUP    

cnpdTopNGroup 1.3.6.1.4.1.9.9.244.2.2.2
The set of objects supported to record notification events.
Status: current Access: read-write
OBJECT-GROUP    

cnpdThresholdGroup 1.3.6.1.4.1.9.9.244.2.2.3
The set of objects supported to record notification events.
Status: current Access: read-write
OBJECT-GROUP    

cnpdMIBNotificationsGroup 1.3.6.1.4.1.9.9.244.2.2.4
The set of notification events supported.
Status: current Access: read-write
NOTIFICATION-GROUP    

cnpdMIBNotificationsConfigGroup 1.3.6.1.4.1.9.9.244.2.2.5
The set of notification configuration events.
Status: current Access: read-write
OBJECT-GROUP    

cnpdSupportedProtocolsGroup 1.3.6.1.4.1.9.9.244.2.2.6
The set of objects describing a protocol or application.
Status: current Access: read-write
OBJECT-GROUP