CISCO-RSRB-MIB

File: CISCO-RSRB-MIB.mib (20673 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IF-MIB CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Integer32 IpAddress Gauge32
NOTIFICATION-TYPE MODULE-COMPLIANCE OBJECT-GROUP
TruthValue MacAddress InterfaceIndex
ciscoMgmt

Defined Types

RsrbVirtRingEntry  
SEQUENCE    
  rsrbVirtRingIndex Integer32 0..2147483647
  rsrbVirtRingIPAddr IpAddress
  rsrbVirtRingMaxTcpQSize Integer32

RsrbRemotePeerEntry  
SEQUENCE    
  rsrbRemotePeerIndex Integer32 0..2147483647
  rsrbRemotePeerEncapsulation INTEGER
  rsrbRemotePeerIPAddr IpAddress
  rsrbRemotePeerLocalIfIndex InterfaceIndex
  rsrbRemotePeerState INTEGER
  rsrbRemotePeerPacketsRx Counter32
  rsrbRemotePeerPacketsTx Counter32
  rsrbRemotePeerBytesRx Counter32
  rsrbRemotePeerBytesTx Counter32
  rsrbRemotePeerExplorersRx Counter32
  rsrbRemotePeerTcpQueue Gauge32
  rsrbRemotePeerDrops Counter32
  rsrbRemotePeerLocalAck TruthValue
  rsrbRemotePeerVersion Integer32

RsrbRingEntry  
SEQUENCE    
  rsrbRingIndex Integer32 0..2147483647
  rsrbRingBridge Integer32
  rsrbRingLocal TruthValue
  rsrbRingType INTEGER
  rsrbRingMacAddr MacAddress
  rsrbRingLocalIfIndex InterfaceIndex
  rsrbRingRemoteIpAddress IpAddress
  rsrbRingNbrPacketsFwd Counter32

Defined Values

ciscoRsrbMIB 1.3.6.1.4.1.9.9.29
This is the MIB module for objects used to manage RSRB. Overview of remote source-route bridging (RSRB) management and MIB MIB description The RSRB MIB will include the following managed entities: 1) Virtual Rings 2) Remote Peers 3) Associated Token Rings The goal of this MIB to to allow a management stations to display the attributes of the local-remote RSRB peer relationship. The following example configuration will show how the RSRB MIB can be used to manage RSRB. == Token Ring == CISCO A == IP Network/ == CISCO B == Token Ring Virtual Ring Both CISCO A and CISCO B are RSRB peers, having the same virtual ring number. In this example information will be gatherered from CISCO A (the local peer), and CISCO B is considered to be CISCO A's remote peer. The first table is the virtual ring table. There is one entry for each RSRB virtual ring the router is defined on. The fields included in this table include * the virtual ring number, or index * the IP address used by the router * the maximum outbound queue size for each RSRB remote peer In this example the table has a single entry since CISCO A only belongs to one RSRB virtual ring. The next table is for each remote peer in the virtual ring. There can be multiple RSRB remote peers. The remote peer information includes: * an internally generated (not configured) index into the table * the type of data encapsulation with the remote peer * identification of how to get to the remote peer; either an IP address or an interface index, depending upon the encapsulation type * the state of the remote peer * various statistics (bytes and packets sent and received, explorers generated, outbound queue size, and packets dropped * whether local acknowledgment is used with the remote peer * the RSRB version of the peer In this example there would be just one remote peer table entry, for CISCO B. The last table is for the real local and remote token rings associated with the RSRB virtual ring, that this router has either had configured or learned about dynamically. The ring information includes: * the token ring number (index) * the bridge number connecting the real ring to the virtual ring * the ring entry type * the local or remote routers mac address on the interface to the ring * the local router's interface index, or the remote router's IP address, depending on if this is a local or remote ring * number of packets forwarded by the local router onto this ring In this example CISCO A would have two ring entries: one for the local ring it is connected to, and one for the ring CISCO B is a part of. A management application can construct a virtual ring view either by collecting MIB information from all routers and grouping those in the same virtual ring together, or beginning with a particular router or routers, and collecting MIB information about other peer routers.
MODULE-IDENTITY    

rsrbObjects 1.3.6.1.4.1.9.9.29.1
OBJECT IDENTIFIER    

rsrbVirtualRings 1.3.6.1.4.1.9.9.29.1.1
OBJECT IDENTIFIER    

rsrbRemotePeers 1.3.6.1.4.1.9.9.29.1.2
OBJECT IDENTIFIER    

rsrbPhysicalRings 1.3.6.1.4.1.9.9.29.1.3
OBJECT IDENTIFIER    

rsrbVirtRingTable 1.3.6.1.4.1.9.9.29.1.1.1
Table of virtual rings in the router.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsrbVirtRingEntry

rsrbVirtRingEntry 1.3.6.1.4.1.9.9.29.1.1.1.1
Configuration values for a virtual ring.
Status: current Access: not-accessible
OBJECT-TYPE    
  RsrbVirtRingEntry  

rsrbVirtRingIndex 1.3.6.1.4.1.9.9.29.1.1.1.1.1
The configured number of the virtual ring in which this peer is participating.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

rsrbVirtRingIPAddr 1.3.6.1.4.1.9.9.29.1.1.1.1.2
The IP address configured for this RSRB local peer.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rsrbVirtRingMaxTcpQSize 1.3.6.1.4.1.9.9.29.1.1.1.1.3
The maximum number of packets that can be held in any single outbound TCP queue to a remote peer before packets are discarded. This value indicates the configured or default value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rsrbRemotePeerTable 1.3.6.1.4.1.9.9.29.1.2.1
Table of RSRB remote peers for a virtual ring.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsrbRemotePeerEntry

rsrbRemotePeerEntry 1.3.6.1.4.1.9.9.29.1.2.1.1
Configuration and status information of a remote RSRB peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  RsrbRemotePeerEntry  

rsrbRemotePeerIndex 1.3.6.1.4.1.9.9.29.1.2.1.1.1
An arbitrary index that uniquely identifies a remote peer within a virtual ring.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

rsrbRemotePeerEncapsulation 1.3.6.1.4.1.9.9.29.1.2.1.1.2
How traffic is encapsulated for RSRB: tcp = IP datagrams over a TCP connection serial = point-to-point (serial) direct encapsulation lan = direct encapsulation over a LAN fst = IP datagrams over a Fast Sequenced Transport connection frameRelay = direct encapsulation over frame relay
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tcp(1), serial(2), lan(3), fst(4), frameRelay(5)  

rsrbRemotePeerIPAddr 1.3.6.1.4.1.9.9.29.1.2.1.1.3
The IP address used by the RSRB remote peer. This field is meaningful only for TCP and FST encapsulation. For other encapsulation types 0.0.0.0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rsrbRemotePeerLocalIfIndex 1.3.6.1.4.1.9.9.29.1.2.1.1.4
Local interface index value to the RSRB remote peer. Same value as used for accessing the Interface MIB for the same interface. This field is meaningful only for serial, LAN and frame relay encapsulation. For other encapsulation types 0 is returned.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rsrbRemotePeerState 1.3.6.1.4.1.9.9.29.1.2.1.1.5
Current state of the RSRB session with the remote peer.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dead(1), closed(2), opening(3), openWaitXport(4), waitRemoteRsp(5), remoteResponded(6), remoteOpened(7), draining(8), connected(9)  

rsrbRemotePeerPacketsRx 1.3.6.1.4.1.9.9.29.1.2.1.1.6
Number of packets received from remote peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rsrbRemotePeerPacketsTx 1.3.6.1.4.1.9.9.29.1.2.1.1.7
Number of packets transmitted to remote peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rsrbRemotePeerBytesRx 1.3.6.1.4.1.9.9.29.1.2.1.1.8
Number of bytes received from remote peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rsrbRemotePeerBytesTx 1.3.6.1.4.1.9.9.29.1.2.1.1.9
Number of bytes transmitted to remote peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rsrbRemotePeerExplorersRx 1.3.6.1.4.1.9.9.29.1.2.1.1.10
Number of explorer packets received from the remote peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rsrbRemotePeerTcpQueue 1.3.6.1.4.1.9.9.29.1.2.1.1.11
Number of packets being held by the local router in the TCP output queue to the remote peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

rsrbRemotePeerDrops 1.3.6.1.4.1.9.9.29.1.2.1.1.12
Number of received packets discarded by the local router. The reasons for packets being dropped include, but are not limited to, problems with the configuration, queue overflow, and protocol errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rsrbRemotePeerLocalAck 1.3.6.1.4.1.9.9.29.1.2.1.1.13
Indicates if local acknowledgment is used for the sessions going to the remote peer. TRUE -> local acknowledgment is used FALSE -> local acknowledgment is not used
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rsrbRemotePeerVersion 1.3.6.1.4.1.9.9.29.1.2.1.1.14
The version of RSRB used between local and remote peer. Generally peers can communicate if they are within one version of each other. The value returned is the lower version of the two peers.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rsrbRingTable 1.3.6.1.4.1.9.9.29.1.3.1
Table of local and remote rings associated with a virtual ring.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsrbRingEntry

rsrbRingEntry 1.3.6.1.4.1.9.9.29.1.3.1.1
A ring described by a unique ring number within the bridged token ring network, and the virtual ring which it is associated with.
Status: current Access: not-accessible
OBJECT-TYPE    
  RsrbRingEntry  

rsrbRingIndex 1.3.6.1.4.1.9.9.29.1.3.1.1.1
The configured ring number that uniquely identifies this network segment or ring within the bridged token ring network.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

rsrbRingBridge 1.3.6.1.4.1.9.9.29.1.3.1.1.2
The configured number of the bridge that connects this entry's ring to the virtual ring.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

rsrbRingLocal 1.3.6.1.4.1.9.9.29.1.3.1.1.3
Indicates if the entry represents a local or remote ring. TRUE indicates a local ring. FALSE indicates a remote ring.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

rsrbRingType 1.3.6.1.4.1.9.9.29.1.3.1.1.4
The ring type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER static(1), dynamic(2), sdllc(3), qllc(4), virtual(5)  

rsrbRingMacAddr 1.3.6.1.4.1.9.9.29.1.3.1.1.5
The mac address of either the local router's interface to the ring for local ring entries, or the remote peer's interface to the ring for remote ring entries. Not valid for entry types remote SDLLC and QLLC; for these type '00 00 00 00 00 00' will be returned.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

rsrbRingLocalIfIndex 1.3.6.1.4.1.9.9.29.1.3.1.1.6
For local ring entries, the local interface into the ring. This is the same value as used for accessing the Interface MIB for the same interface. Not meaningful for remote ring entries; for these types 0 will be returned.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

rsrbRingRemoteIpAddress 1.3.6.1.4.1.9.9.29.1.3.1.1.7
For remote ring entries, the IP address of the remote RSRB peer. Not meaningful for local ring entries, and so 0.0.0.0 will be returned.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

rsrbRingNbrPacketsFwd 1.3.6.1.4.1.9.9.29.1.3.1.1.8
The number of packets forwarded by the local router onto this ring.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

rsrbNotificationPrefix 1.3.6.1.4.1.9.9.29.2
OBJECT IDENTIFIER    

rsrbNotifications 1.3.6.1.4.1.9.9.29.2.0
OBJECT IDENTIFIER    

rsrbPeerStateChangeNotification 1.3.6.1.4.1.9.9.29.2.0.1
This trap indicates that the state of an RSRB remote peer has transitioned to active (psConnected) or inactive (psDead or psClosed).
Status: current Access: read-only
NOTIFICATION-TYPE    

rsrbMibConformance 1.3.6.1.4.1.9.9.29.3
OBJECT IDENTIFIER    

rsrbMibCompliances 1.3.6.1.4.1.9.9.29.3.1
OBJECT IDENTIFIER    

rsrbMibGroups 1.3.6.1.4.1.9.9.29.3.2
OBJECT IDENTIFIER    

rsrbMibCompliance 1.3.6.1.4.1.9.9.29.3.1.1
The compliance statement for rsrb.
Status: current Access: read-only
MODULE-COMPLIANCE    

rsrbVirtRingGroup 1.3.6.1.4.1.9.9.29.3.2.1
A collection of objects providing configuration capability.
Status: current Access: read-only
OBJECT-GROUP    

rsrbRemotePeerGroup 1.3.6.1.4.1.9.9.29.3.2.2
A collection of objects providing operational control capability.
Status: current Access: read-only
OBJECT-GROUP    

rsrbRingGroup 1.3.6.1.4.1.9.9.29.3.2.3
A collection of objects providing operational control capability.
Status: current Access: read-only
OBJECT-GROUP